Aastra 6739i - Documents and Downloads ( Mitel )

Aastra 6739i - Documents and Downloads ( Mitel )
Aastra 6739i
SIP Telephone
User Guide
Communications systems
Aastra 800
OpenCom X320
OpenCom 130/131/150
OpenCom 510
Welcome to Aastra
Thank you for choosing this Aastra product. Our product meets the strictest
requirements with regard to quality and design.
The following operating instructions will assist you in using your Aastra 6739i and
answer most of the questions that may arise.
If you require further technical support or information about other Aastra products,
please refer to our website at http://www.aastra.de or http://www.aastra.com.
It provides additional notes and tips on the product.
We hope you enjoy using your Aastra 6739i.
Aastra 800 and OpenCom 100
This user guide applies to the Aastra 800 and OpenCom 100 communications
systems. The OpenCom 100 product family comprises the OpenCom 130,
OpenCom 131, OpenCom 150, OpenCom 510 and OpenCom X320 communications
systems.
If individual features differ on the systems, a reference is made in this user guide.
Contents
Aastra 6739i SIP Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Distinctive Features of the Communications System. . . . . . . . . . . . . . . . . . . . . . 7
Operating Aastra 6739i SIP Telephone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Basic Operating Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Authorisations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Dedicated Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Communications System Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Options Menu of the Aastra 6739i SIP Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Touchscreen Display and Softkey Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Telephoning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Calling with Selective Line Seizure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Redial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Speed Dialling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Accepting a Call While Telephoning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Holding a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Taking a Call from Another Terminal (Take) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Accepting a Call for Another Terminal (Pickup from Group) . . . . . . . . . . . . . . . . . 16
Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Three-Party Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Enquiry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Toggle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Transferring Call to Another Caller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Conference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Other Device Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Handsfree / Open-Listening Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Mute Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Adjusting Volume Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
1
Selecting Code Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using a Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Bluetooth Headset Operational . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Voicebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Querying Voicebox Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Calling Voicebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Call Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Call Waiting Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Telephone Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Hot Desking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Presence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Busy Lamp Field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
SIP Telephone Menus Aastra 6739i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
1 Calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
2 Call Forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
3 Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5 Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
6 Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
9 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
0 Central settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
“Main menu” Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
The Options Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
“Options Menu” Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
2
Configuring the Aastra 6739i SIP Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Programming Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Restarting the Aastra 6739i SIP Telephone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Deleting a Local Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Restoring Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Aastra 6739i SIP Telephone Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Picture ID Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3
4
Aastra 6739i SIP Telephone
Aastra 6739i SIP Telephone
The Aastra 6739i SIP telephone is a Voice over IP (VoIP) telephone in accordance with
the internationally standardised SIP standard (Session Initiation Protocol). Connected
to the communications system OpenCom 100 / Aastra 800 you have additional
comfort functions available.
Aastra 6739i
A special feature of the Aastra 6739i SIP telephone is its high resolution backlit touchscreen display and full VGA resolution (640 x 480 pixels). Using the latest in technology, navigation menus are shown on this display for accessing the complete range
of functions available on this SIP telephone.
The Aastra 6739i SIP telephone has three dedicated trunk keys
/
/
with LED. Along with the 14 dedicated keys – e.g. for the “Forward”, “Conference”,
“Hold”features – the device offers 55 user-specific softkeys on the display which can
have functions of the OpenCom 100 / Aastra 800 communication system assigned to
them.
The key extensions Aastra M670i or Aastra M675i offer additional function keys for the
Aastra 6739i SIP telephone:
5
Aastra 6739i SIP Telephone
•
Aastra M670i: offers 36 function keys
•
Aastra M675i: offers 20 softkeys respectively programmable on three levels (total
of 60 storage locations)
Up to three key extensions can be connected: three key extensions of either the
Aastra M670i type or three of the Aastra M675i type. Key extensions cannot be combined on the OpenCom 100 / Aastra 800 communications system.
Aastra M670i
Aastra M675i
About this Manual
This manual describes how to use an Aastra 6739i SIP telephone which is connected
to an OpenCom 100 / Aastra 800 communications system. If you require further information, please consult the following Aastra 6739i manuals:
•
Aastra 6739i SIP IP Phone Installation Guide (print version included with the
product): describes features, controls and possible connections of your SIP telephone.
•
Aastra 6739i SIP IP Phone User Guide: describes the most frequently used
telephony features for the telephone user.
•
Aastra SIP IP Phone Administrator Guide: contains extensive information for the
administrator and describes how to configure the SIP telephone within the
network.
These manuals may also be downloaded as PDF files from the Aastra website.
6
Aastra 6739i SIP Telephone
Please note the information on configuration and operation of SIP telephones in the
OpenCom 100 / Aastra 800 communications system documentation:
•
Mounting and Commissioning manual (for the Aastra 800 communications
system: Installation and Commissioning),
•
Aastra 800 and OpenCom 100 Online Help.
This documentation is available on the OpenCom 100 product CD (on the USB stick
for the Aastra 800). Current versions are available for download on the Aastra website.
Distinctive Features of the Communications System
When you operate an Aastra 6739i on the OpenCom 100 / Aastra 800 communications system, some functions differ from how they are described in the installation
guide and in the user guide.
This applies especially to functions which are provided locally on the device as well as
via the OpenCom 100 / Aastra 800 communications system. In these cases, the functions provided by the communications system are used. The corresponding local
device menus will not appear then.
•
The Aastra 6739i does not execute its own call forwarding. Use the call forwarding
function of the OpenCom 100 / Aastra 800 communications system (please refer
to Call Forwarding starting on page 24).
•
The Aastra 6739i does not manage a local caller list nor a local phone book. Configure function keys instead to access the callers list (Call Lists starting on page 17)
and the phone book (please refer to Phone Book starting on page 25) of the
OpenCom 100 / Aastra 800 communications system.
•
The Aastra 6739i has a separate Web interface. This is blocked by the
OpenCom 100 / Aastra 800 communications system.
7
Operating Aastra 6739i SIP Telephone
Operating Aastra 6739i SIP Telephone
Basic Operating Functions
Authorisations
Most of the features mentioned in this manual can only be used when you have the
corresponding authorisation. Your system administrator configures authorisations
when configuring the communications system.
Contact the system administrator when you have questions on specific features or are
not able to use a feature satisfactorily.
Dedicated Keys
The following table explains the 14 dedicated keys of the Aastra 6739i SIP telephone.
Aastra 6739i
Keys
Key Description and Function
Options key: accesses the Options List menu card (please refer to
The Options Menu starting on page 41).
Caller key: opens the list of missed calls (please refer to Call Lists
starting on page 17).
Phone book key: opens the phone book of the OpenCom 100 /
Aastra 800 communications system (please refer to Phone Book starting on page 25).
Options key: this key is not used on the OpenCom 100 / Aastra 800
communications system.
Conference key: is for initiating a conference.
Transfer key: transfers the current call to another subscriber.
Hold key: Puts the current call on hold. Press this key once again to
retrieve the call on hold.
8
Operating Aastra 6739i SIP Telephone
Aastra 6739i
Keys
Key Description and Function
Redial key: redials previously dialled numbers.
Goodbye key: Ends an active call or exits an open menu page
without saving any changes made.
Mute key: turns the microphone on or off.
Volume control keys: adjust the volume for the handset, ringer and
speaker.
Voice mail key: opens the list of voicebox messages (see Querying
Voicebox Messages starting on page 26).
Trunk keys: connect you to a specific line or accept a call which is
signalled on the line.
Handsfree key: Activates the handsfree function for making and
receiving calls without picking up the handset. When a headset is
connected, a call can be accepted and ended using this key.
Function Keys
Function keys are softkeys on the touchscreen display. The functions of these keys are
configured and labelled with the OpenCom 100 / Aastra 800 communications system.
These keys offer access to individually configurable system functions such as e.g. configuring call forwarding, executing speed dialling, displaying a busy lamp field or
accessing the phone book of the communications system.
Depending on the function programmed the respective state is signalled via the
softkey lighting up red or blinking red (please refer to the chapter Programming Function Keys starting on page 45).
9
Operating Aastra 6739i SIP Telephone
1
1
3
.....
2 ABC
3 DEF
4
GHI
5
JKL
6 MNO
7
PQRS
8
TUV
9 WXYZ
1
0
2
#
Softkeys on touchscreen display
1 Softkeys with programmed functions (function keys)
2 Level key for switching levels: This softkey enables programming up to 55 softkeys
(11 softkeys on 5 levels). Press this softkey multiple times to reach the desired key
level.
3 state-dependent softkeys: These softkeys offer state-dependent functions which
you can activate, e.g. holding a call while making a call.
Communications System Main Menu
Most features which the system administrator can program to a separate function key
of the Aastra 6739i SIP telephone can be set and used via the main menu of the
OpenCom 100 / Aastra 800 communications system. To do so, the administrator has
to configure a Main menu function key on the Aastra 6739i SIP telephone (see Programming Function Keys starting on page 45).
Please read the chapter Main menu starting on page 34 on the menu functions and
features.
10
Operating Aastra 6739i SIP Telephone
Options Menu of the Aastra 6739i SIP Telephone
The Aastra 6739i SIP telephone also has a local options menu. This menu is primarily
for configuring the telephone (display settings, ring tone settings, etc.).
Please read the chapter The Options Menu starting on page 41 on the menu functions.
Using Menus
Opening main menu
You open the main menu by pressing the Main menu function key.
Closing main menu
Press the Done softkey or – alternatively – the Goodbye key
are then lost!
. Unsaved changes
Opening options menu
Press the
options key to open the options menu.
Closing options menu
Press the
Goodbye key.
Menu navigation
•
Use the
•
Use the
navigation keys to browse through a displayed menu.
softkey to go back a menu level.
Hiding menus automatically
When you have opened a menu and make no entries for a longer period of time, the
menu will automatically fade and the idle display of the telephone appears.
Touchscreen Display and Softkey Keyboard
Aastra 6739i SIP telephone entries (e.g. message texts, call numbers) are via the
touchscreen display.
Input fields on the display
There are various usage situations where the display shows an entry field, e.g. for
entering a name for searching the phone book. Activate this field by pressing on it. A
softkey keyboard then appears on the display.
11
Operating Aastra 6739i SIP Telephone
Using the softkey keyboard
You can enter letters, special characters and numerals via the softkey keyboard:
•
Use the CAP, Abc, Abc2, 123, &%* softkeys to make the desired character appear
on the keyboard.
•
To correct a mistaken entry use the Bksp (backspace) softkey.
•
Press the Hide softkey to hide the keyboard.
•
Confirm your entries using the Enter softkey.
Note
Instead of the softkey keyboard, you can also use the SIP telephone number keys to
enter numerals.
12
Operating Aastra 6739i SIP Telephone
Telephoning
Calling
1. In order to establish a connection,
– pick up the handset or
– press the handsfree key
, to make the following call in the handsfree mode
(see Handsfree / Open-Listening Mode starting on page 21).
2. Dial a call number:
– Enter the call number. Press the
– Or: Press the
page 14).
Dial softkey.
redial key to call back a previously dialled call number (see
– Or: Press the function key with the phone book function (see Phone Book
starting on page 25). This function is for selecting a call number from the phone
book of the OpenCom 100 / Aastra 800 communications system.
The display shows a picture (photo) of the user called if an image has been saved on
the OpenCom 100 / Aastra 800 communications system (please refer to page 50).
Calling with Selective Line Seizure
If multiple trunk keys are configured for your telephone, you can seize a line selectively.
1. Press a trunk key
/
/
to seize a specific line.
2. Dial a call number (see page 13).
Note
If the administrator has linked a trunk key
/
/
with a SIP user account,
you will be calling under the call number of the SIP user account. If the trunk key is
not linked, the call number of trunk key 1
is used.
13
Operating Aastra 6739i SIP Telephone
Redial List
The redial list shows the call numbers last called. You can use this list to redial.
1. Press the
redial key.
The Redial list menu card appears.
2. Use the navigation keys
to go to the desired entry.
– To show detailed information on the entry selected, press the
– To call the selected call number, pick up the handset or press the
softkey.
softkey.
alternatively: Press the
handsfree key, to make the following call in the
handsfree mode (see Handsfree / Open-Listening Mode starting on page 21).
The call number is dialled. The display shows a picture (photo) of the user called if
an image has been saved on the OpenCom 100 / Aastra 800 communications
system (please refer to page 50).
The following editing options (softkeys) are available in the redial list:
•
Dial: The call number displayed is dialled.
•
Delete: You delete the entry selected.
•
Delete all: You delete all messages stored in your redial list (after a confirmation
prompt). Confirm the confirmation prompt using the Yes softkey.
Speed Dialling
The administrator of the OpenCom 100 / Aastra 800 communications system can configure function keys for you with speed dialling destinations (Destination function
key, see Programming Function Keys starting on page 45).
•
Pick up the handset and press the function key where the speed dialling destination is programmed.
alternatively – when you wish to call in the handsfree mode:
•
14
Press the function key – with the handset down – where the speed dialling destination is programmed.
Operating Aastra 6739i SIP Telephone
Answering a Call
An incoming call is signalled via ringer, a blinking trunk key and the blinking red LED
indicator to the upper right. The display shows a picture (photo) of the person you are
speaking with if an image has been saved on the OpenCom 100 / Aastra 800 communications system (please refer to page 50).
To accept the call, you:
•
pick up the handset or
•
press the
•
press the blinking trunk key
•
press the handsfree key
(see page 21).
Answer softkey or
/
/
or
to accept the following call in the handsfree mode
During call signalling you can:
•
press the
Silence softkey to mute the ringer. The person calling continues to
hear the ringing tone.
•
press the
busy tone.
Reject softkey to reject the call. The person calling now hears the
Accepting a Call While Telephoning
You are telephoning, e.g. on trunk key 1
, hear the call-waiting tone and see the
call on the display. The LED next to your available trunk key, e.g.
, is blinking.
1. Press the trunk key where the caller is waiting. Your first call is placed on hold. You
talk with the caller.
2. You can also toggle back and forth between callers or initiate a conference with
both callers (please refer to page 20 also).
3. Press the goodbye key
to terminate the current call. Then press the trunk key
where the other caller is waiting. You are now connected with the caller on hold
once again.
Note
If you have switched on call waiting protection (please refer to page 28 also) no other
calls will be signalled (no call-waiting tone, no LED of an available trunk key blinking).
Callers now receive the busy signal.
15
Operating Aastra 6739i SIP Telephone
Holding a Call
You can briefly interrupt an ongoing call:
1. Press the hold key
music on hold.
or the
Hold softkey. The person calling now hears
2. Press the Hold key
again or press the
Hold softkey to continue the call.
Taking a Call from Another Terminal (Take)
You can take an ongoing call from another terminal on your Aastra 6739iSIP telephone and continue it there. To be able to do so, your telephone and the other terminal have to have the same internal call number. To do so, the administrator of the
OpenCom 100 / Aastra 800 communications system has to configure a Take function
key (please refer to Programming Function Keys starting on page 45).
To take on a call on your telephone you:
•
pick up the handset and press the Take function key or
•
– when the handset is not picked up – press the Take function key to accept the
call in the handsfree mode (please refer to page 21).
Tip:
The Take function can also be carried out via the main menu:
6 Connections > 1 Call pick-up > 3 Take (see page 38).
Accepting a Call for Another Terminal (Pickup from Group)
You can accept a call for another telephone in your Pickup group. To do so, the administrator of the OpenCom 100 / Aastra 800 communications system has to configure a
Pickup from group function key (see Programming Function Keys starting on
page 45).
Another telephone in your Pickup group is ringing. To accept the call, you:
•
pick up the handset and press the Pickup from group function key or
•
– when the handset is not picked up – press the Pickup from group function key
to accept the call in the handsfree mode (see page 21).
If you are telephoning and would like to accept a call using Pickup …
1. Press an unassigned trunk key, e.g. trunk key 2
.
The person calling is put on hold and now hears music on hold.
2. Press the Pickup from group function key.
16
Operating Aastra 6739i SIP Telephone
3. You can also toggle back and forth between callers or initiate a conference with
both callers (please refer to page 19 also).
Tip:
The Pickup from group function can also be carried out via the
main menu: 6 Connections > 1 Call pick-up > 1 Pick-up (see
page 38).
Note
“Pickup” is not possible if the person called belongs to a user group which has
pickup protection activated.
Ending a Call
To end a call you do as follows:
•
Put down the handset.
or:
•
press the goodbye key
.
Call Lists
The administrator of the OpenCom 100 / Aastra 800 communications system can configure Missed calls and Accepted calls function keys (please refer to Programming
Function Keys starting on page 45). Use these function keys to access the caller lists
managed on the OpenCom 100 / Aastra 800 communications system. The Missed
calls softkey blinks red when the list contains new entries.
1. Press the Missed calls or Answered calls function key to show the respective call
list. Press the
caller key to display the list of missed calls.
The caller list appears.
2. Use the navigation keys
to go to the desired entry.
– To show detailed information on the entry selected, press the
– To call the selected caller entry, pick up the handset or press the
softkey.
softkey.
alternatively: Press the
handsfree key, to make the following call in the
handsfree mode (see Handsfree / Open-Listening Mode starting on page 21).
17
Operating Aastra 6739i SIP Telephone
The call number is dialled. The display shows a picture (photo) of the user called if
an image has been saved on the OpenCom 100 / Aastra 800 communications
system (please refer to page 50).
The following editing options (softkeys) are available in the call lists:
•
Dial: You call the caller back.
•
Delete: You delete the entry selected.
•
Delete all: You delete all messages stored in your call list (after a confirmation
prompt). Confirm the confirmation prompt using the Yes softkey.
Tip:
You can also query and edit the call list via the main menu:
1 Calls > 1 Call lists > 1 Missed calls and 1 Calls > 1 Call lists >
2 Accepted calls (see page 35).
Notes
•
The authorisations of your user group determine which calls are recorded on your
call lists. Your system administrator can specify that internal calls, external calls,
calls when busy, and calls from the door be included on your call lists.
•
If your internal call number (e.g. “30”) is configured on multiple terminals, you can
view and edit the redial lists for the call number 30 on each of these terminals. An
edited call list is updated on all these terminals.
•
The name is displayed instead of the call number in the call lists if the caller is in
the system phone book.
•
The call lists also contains calls transferred or forwarded to you from other internal
subscribers.
•
When you receive an external call where the caller is displaying a different call
number than the one actually technically being transmitted, a “?” appears next to
the call number on the display. If the call number indicated on the display is saved
to a phone book entry, the name is displayed as usual along with a question mark.
•
Door calls are shown either with the call number, or with the name of the
doorbell – depending on the type of door intercom in use.
•
If a caller suppresses display of his/her call number, the call is also saved on the
caller list. Multiple calls from an unknown call number are listed as one entry. The
system administrator can, however, during system configuration, determine that
any calls with unknown call numbers will not be included on your call lists.
18
Operating Aastra 6739i SIP Telephone
Three-Party Calls
You are making a call, e.g. on the trunk key 1
, its corresponding LED indicator is
lit. You can now forward the call, execute an enquiry, switch back and forth between
two callers (“toggle”) or set up a conference. You can use any available trunk key
/
/
for three-party conference calls.
Enquiry
While telephoning, you can make an enquiry to another caller.
Note
The enquiry function cannot be used to transfer calls on SIP telephones. Alternatively, use the
Transfer softkey or the transfer key
.
1. Press an unassigned trunk key, e.g. trunk key 2
. Alternatively press
the
Hold softkey and then press an available trunk key.
You hear the internal dialling tone. The person calling is put on hold and now
hears music on hold.
2. Now dial the call number of the caller desired and make the enquiry call.
3. Press the goodbye key
to terminate the enquiry call.
4. Press the trunk key where the first caller is waiting or press the
You are now connected with the caller on hold once again.
Hold softkey.
Note
If after ending the enquiry call you put down the handset, after a few seconds you
will automatically be called back with the connection on hold.
Toggle
While you are conducting an enquiry call, the first caller is put on hold (see page 19).
Now you can toggle between callers (switch back and forth).
1. Press the trunk key (e.g.
) of the caller waiting currently. The other caller is put
on hold. The LED indicator of the trunk key of the respectively held caller blinks
during this process. The held caller hears music on hold.
19
Operating Aastra 6739i SIP Telephone
2. Press the trunk key of the caller waiting to switch to that caller. The other caller is
now put on hold.
Tip:
While you are talking with the first caller (the second caller is on
hold), you can initiate a conference with both callers. Press
the
Conf (Conference) softkey or the
conference key. To
end the conference specifically, please read the description on
page 21.
3. Ending toggling: Press the goodbye key
to terminate the current call.
4. Then press the trunk key where the other caller is waiting or press the
softkey. You are now connected with the caller on hold once again.
Hold
Transferring Call to Another Caller
1. Press the
Transfer softkey or the transfer key
.
The person calling is put on hold and now hears music on hold.
2. Dial the call number of the internal caller desired.
– Transferring a call with notification: When the caller answers, announce the
call transfer. Press the
Transfer softkey or the transfer key
.
– Transferring a call without notification: When you wish to wish to transfer the
call without notification, wait for the ringing tone. Press the
Transfer softkey
or the transfer key
. The caller on hold now hears the ringing tone of the
transfer destination and waits for the call to be accepted.
Conference
You can speak with two callers simultaneously in a so-called “three-party conference”.
1. You are making a call.
2. Press the
Conf (Conference) softkey or the
put on hold.
conference key. Your caller is
3. Dial the call number of the conference caller desired.
4. When the second caller answers, announce the conference. Press the
(Conference) softkey or the
conference key.
Conf
You are now connected with both callers in a three-party conference. The display
shows the list of conference partners.
20
Operating Aastra 6739i SIP Telephone
5. Do the following to end the conference:
– Disconnecting individual conference participants:Press the
softkey of the
person you are speaking with. This ends the connection to the caller selected.
– Ending conference:Put down the handset or press the Goodbye key
end the conference (connection to both callers).
to
Other Device Functions
Handsfree / Open-Listening Mode
You can make a call in the handsfree mode, e.g. to let anyone present in the room
listen in. To do so, press the Loudspeaker key
before or during a call. The speaker
is switched on. The red LED indicator next to the handsfree key lights up. Press the key
once again to switch the speaker off.
During a conversation in handsfree mode, you can also pick up the handset and continue the call without handsfree / speaker.
Mute Function
If you do not want the caller to listen in to what, e.g. you are discussing with someone
in the room, you can temporarily mute the telephone. During a call press the mute
key
or the
Mute softkey. The microphone is switched off. The red LED indicator next to the key blinks and your caller can no longer hear you. Press the mute
key
once again or the
Mute softkey to switch the microphone back on.
Adjusting Volume Level
You can adjust the volume of the ringer, of the handset or of the speaker with the
volume keys
.
•
During call signalling you can adjust the volume of the ringer.
•
While making a call, you adjust the volume of the handset or – in the handsfree
mode – the volume of the speaker.
21
Operating Aastra 6739i SIP Telephone
Selecting Code Procedures
Some OpenCom 100 / Aastra 800 communications system features can also be used
via code procedures. These procedures can be programmed to a Destination
function key by the administrator for you (see Programming Function Keys starting on
page 45).
You execute programmed code procedures by pressing the programmed function
key.
Note for the administrator
The code procedures available on the Aastra 6739i SIP telephone are in the
“OpenCom 100 / Aastra 800 short user guide: Code-number procedures” (available on
the OpenCom 100 product CD as a PDF file, on the USB stick for the Aastra 800).
A current online overview is also available on the web console of the OpenCom 100 /
Aastra 800 communications system in the menu System Info: Codes.
Using a Headset
Instead of using a handset, a headset can be connected to the Aastra 6739i SIP telephone. You can press the
handsfree key in this case in order to accept and end
calls.
You can configure whether to use the headset or the speaker for handsfree operation
via the menu Options List > Audio (see The Options Menu starting on page 41).
Note
Establishing a call can be delayed with SIP telephony. When using a headset, e.g. you
should wait a second before you begin to speak.
Please note:
22
Use only headsets authorised for use by Aastra on the
Aastra 6739i SIP telephone!
Aastra assumes no responsibility for damage resulting from
headset usage not authorised by Aastra. Contact your dealer or
Aastra sales if you require information in this regard.
Operating Aastra 6739i SIP Telephone
Bluetooth Headset Operational
The Aastra 6739i SIP telephone supports operation of a Bluetooth headset.
Press the
options key and then the Bluetooth softkey. The
card appears.
Bluetooth menu
Switch Bluetooth function on/off
•
Switch the Bluetooth function on by pressing the
•
To switch off the Bluetooth function press the
softkey.
softkey.
Add Bluetooth device
1. (Optional) Activate the Device Name field by pressing on it. Then enter the device
name via the softkey keyboard.
2. Press the Add new device
Bluetooth headset.
softkey. Press the Search softkey to search for a
Once the search is completed the Bluetooth devices located appear on the display.
Pairing (mutual logging on)
1. Press the desired Bluetooth headset on the display.
2. You will be requested to enter the PIN which is “0000” in the default setting. If this
PIN is not accepted, look up the correct PIN in the Bluetooth headset documentation.
Once pairing has been successfully completed, the display shows a softkey with a
green outline which has the device name of the Bluetooth headset on it. If the
softkey has a red outline, this means that pairing was unsuccessful.
3. Press the goodbye key
to exit the menu card.
Logging out Bluetooth Headset
1. Press on the
softkey next to the softkey of the Bluetooth headset.
The Bluetooth headset is logged out from the Aastra 6739i SIP telephone.
2. Press the goodbye key
to exit the menu card.
23
Operating Aastra 6739i SIP Telephone
Call Forwarding
The administrator of the OpenCom 100 / Aastra 800 communications system can configure a Call forward function key (please refer to Programming Function Keys
starting on page 45).
1. Press the Call forward function key.
The display shows a separate line with Immediately, After delay or Busy for each
type of call forwarding along with the current status (“+” = on, “-” = off ). A separate
call forwarding can be configured for each type of call forwarding.
2. Press the
softkey on the display line showing the desired call forwarding type .
3. Program the following call forwarding parameters by pressing the respective
softkey next to it.
– Dest.: Enter the call number to be forwarded to.
– Duration: When programming call forwarding after time, enter the time in
seconds after which a call is to be forwarded (10 sec … 120 sec). If you do not
enter a value, the default time interval provided by the system administrator at
system configuration is used (default: 20 seconds).
– Internal calls / External calls / int./ext. calls: Select which calls are to be forwarded.
– On/Off: Switching call forwarding on or off. Active call forwarding is indicated by
a “+” sign. This is followed by the call forwarding destination.
4. Press the goodbye key
Tip:
to exit the menu card.
Call forwarding can also be set using the main menu: 2 Call
forwarding > 1 Call diversion (see page 35). The Follow Me
type call forwarding can also be set there.
Notes
•
All calls for the call numbers of your device are forwarded. If a number is in use on
more than one telephone, then calls made to any of the other telephones will be
forwarded as well.
•
You can activate all types of call forwarding simultaneously. In this case, the
Immediately type call forwarding is always executed.
24
Operating Aastra 6739i SIP Telephone
Phone Book
The administrator of the OpenCom 100 / Aastra 800 communications system can configure a Phone book function key (please refer to Programming Function Keys
starting on page 45). Use this function key to access the phone books managed on
the OpenCom 100 / Aastra 800 communications system.
1. Press the Phone Book function key or also the
phone book key.
The Phone book menu card appears.
2. If you wish to open the entire phone book press the
Submit softkey.
Alternatively you can search the phone book for the desired entry. Activate the
Name: input field. Enter the initial letters of the name you are searching for and
press the Enter softkey.
A list of the corresponding phone book entries of the OpenCom 100 / Aastra 800
communications system will appear.
3. Use the navigation keys
to go to the desired entry.
If there are multiple call numbers saved in the phone book (Office, Mobile or
Home) these are shown on the display. Press on the display line showing the
desired call number.
4. To call the selected call number, pick up the handset or press the
softkey.
If you would like to conduct the following call in the handsfree mode, press the
handsfree key
.
The call number is dialled. The display shows a picture (photo) of the user called if
an image has been saved on the OpenCom 100 / Aastra 800 communications
system (please refer to page 50).
Tip:
The phone book can also be opened using the main menu:
6 Connections > 2 Dial > 4 Pick-up (see page 39).
25
Operating Aastra 6739i SIP Telephone
Voicebox
Querying Voicebox Messages
The administrator of the OpenCom 100 / Aastra 800 communications system can configure a voicebox for you as an answering machine. Querying voicebox messages is
possible via a Speech function key (see Programming Function Keys starting on
page 45). Activating or deactivating the voicebox is done via call forwarding to the
voicebox call number (see Call Forwarding starting on page 24).
Any time there are new messages on your voicebox, the
symbol appears on the
display with the number of voicebox messages received below it. The Speech softkey
as well as the LED of the
voice mail key are blinking red.
1. Press the Speech function key or also the
voice mail key.
The display shows the list of received messages.
2. Use the navigation keys
to go to the desired entry.
To listen to the message, pick up the handset or press the Loudspeaker key
Your voicebox is called and the message is played.
.
If you would like to call the voicebox in the handsfree mode, press the handsfree
key
.
3. To show detailed information on the entry selected, press the
softkey. Date
and time of receipt of the message as well as duration of the message are shown.
4. The following editing options (softkeys) are available when querying voicebox
messages:
– Dial: You call the caller back.
– Play: Listen to the message. You can also use the number keys to control
message playback: 4 (rewind), 5 (pause) and 6 (fast forward).
– Forward: You can forward the message to another voicebox with or without
comment. Activate the Dest.: input field. Enter the call number of the other voicebox and press the Enter softkey. To end a spoken comment, press the star key.
– Delete: You delete the message from your voicebox.
– Delete all: You delete all messages stored in your voicebox (after a confirmation
prompt). Confirm the confirmation prompt using the Yes softkey.
5. Press the goodbye key
26
to exit the menu card.
Operating Aastra 6739i SIP Telephone
Tip:
The voicebox messages query is also available via the following
main menu entries: 9 Applications > 1 Voicebox > 1 Voicebox
mess. (see page 39) and 1 Calls > 1 Call lists > 3 Voicebox mess.
(see page 35).
Calling Voicebox
It is possible to configure a Voicebox function key. Use this function key to call your
voicebox.
1. Press the Voicebox function key.
The voicebox is called.
2. The next steps are voice-controlled. Follow the voice menu instructions.
3. Press the goodbye key
Tip:
to exit the voicebox system.
The voicebox can also be called via the following main menu entry: 9 Applications > 1 Voicebox > 2 Call voicebox (see
page 39).
27
Operating Aastra 6739i SIP Telephone
Security
Call Protection
Activating call protection also switches signalling of calls off for all call numbers of
your device (exception: VIP calls continue to be signalled). When call protection is activated, a caller hears either a ringing tone or a busy signal (the OpenCom 100 /
Aastra 800 communications system administrator configures this).
The administrator can configure a Call protection (see Programming Function Keys
starting on page 45). This involves defining whether call protection applies to internal
calls only, to external calls only, or for both types of calls.
1. Press the Call protection function key to activate call protection.
The softkey lights up red. The person calling hears the ringing tone, but your telephone does not signal the call.
2. Press the function key once again to deactivate the call protection function.
Tip:
Call protection can also be set using the main menu:
5 Protection > 1 Call protect (see page 37). You can set the type
of call protection (internal, external, internal & external) yourself
in the main menu.
Note
Call protection is only in effect on the terminal where it was activated. If the internal
call number of the terminal is available multiple times (i.e. on other terminals as well),
call protection is not automatically activated on them.
Call Waiting Protection
While you are making a call, and are thus busy, authorised internal subscribers can use
call waiting to notify you that they are calling you also. Activate call-waiting protection to prevent this.
The administrator of the OpenCom 100 / Aastra 800 communications system can configure a Call waiting protection function key (please refer to Programming Function
Keys starting on page 45).
28
Operating Aastra 6739i SIP Telephone
1. Press the Call waiting protection function key to activate call protection.
The softkey lights up red. While you are telephoning, other calls will not be signalled by a call-waiting tone; the caller hears the busy tone.
2. Press the function key once again to deactivate the call waiting protection
function.
Tip:
Call waiting protection can also be set using the main menu:
5 Protection > 8 Call wait. prot. (see page 37).
Note
Call waiting protection is only in effect on the terminal where it was activated. If the
internal call number of the terminal is available multiple times (i.e. on other terminals
as well), call protection is not automatically activated on them.
Telephone Lock
You can lock the Aastra 6739i SIP telephone to prevent unauthorised use. You must
use your user PIN to unlock the phone. This function can also be executed via a Phone
lock function key (see Programming Function Keys starting on page 45).
Locking telephone
The Phone lock function key is labelled Lock.
1. Press the Lock key.
The key is now labelled Unlock and outlined in green. Display shows:
is locked.
Phone
When the phone is locked, emergency calls to predefined call numbers can still be
made. The admitted call numbers depend on the special lists assigned to the user
group (Telephony: Lists: Special lists menu). The default contains the 110 and 112
call numbers.
Unlocking telephone
1. Press the Unlock key.
The
Phone is locked menu card appears.
2. Press the Unlock the phone softkey.
29
Operating Aastra 6739i SIP Telephone
3. Activate the Enter Unlock Password input field. Enter your user PIN and press the
Enter softkey.
Unlock the phone? appears on the display.
4. Press the Yes softkey.
Note
If you wish to permit another person to temporarily use your telephone, you can activate the telephone lock via the main menu 5 Protection > 3 Telephone lock (see
page 37). Independent of the system configuration, when the telephone lock is activated, the functionality range of the Aastra 6739i SIP telephone is restricted, incl.
possibly restricted dialling rights.
Hot Desking
The Aastra 6739i SIP telephone supports the “Hot Desking” feature. This feature
enables you to apply the user configuration of your phone to any other Aastra 6739i
type SIP telephone.
1. If the desired Aastra 6739i SIP telephone is currently in operation, press the
Logout function key and confirm the prompt with the OK softkey.
The phone restarts. Press the Loginsoftkey. The Login phone menu card appears.
2. Activate the Phone no. input field. Enter your call number and press the
Enter softkey.
3. Activate the PIN input field. Enter your user PIN and press the Enter softkey.
The phone restarts – it is configured with your configuration. If your configuration is
currently active on another Aastra 6739i SIP telephone, the other phone will be
logged out automatically.
Tip:
30
The phone book can also be logged out using the main menu:
5 Protection > 0 Logout (see page 37).
Operating Aastra 6739i SIP Telephone
Notifications
Messages
OpenCom 100 / Aastra 800 communications system users with a system terminal can
send you short messages. The OpenCom 100 / Aastra 800 communications system
also has a configuration determining whether or not you are informed of incoming emails.
The administrator can configure a Messages function key for you (see Programming
Function Keys starting on page 45) which enables you to read messages on the telephone display. The Messages softkey blinks red when there are new messages.
1. Press the Messages function key.
The Messages menu card appears.
2. Use the navigation keys
to go to the desired entry.
3. To show detailed information on the entry selected, press the
softkey.
– With short messages, you see the text, date/time message was received.
– With e-mail you see the sender, subject and date/time it was received
4. The following editing options (softkeys) are available when querying messages:
– Forward: You can edit the short message and then forward it to another user.
Activate the Message: input field. Enter the message and press the Enter softkey.
Then activate the No.: input field. Enter the call number of the message recipient
and press the Enter softkey.
– Delete: You delete the entry selected.
– Delete all: You delete all entries on the list of messages (after a confirmation
prompt). Confirm the confirmation prompt using the Yes softkey.
– Show: Date/time received and the sender of the selected short message is displayed.
5. Press the goodbye key
Tip:
to exit the menu.
You can also use the main menu to query and edit short messages and how you receive e-mail. 3 Messages > 1 Short
messages (see page 36) and 3 Messages > 2 E-Mail (see
page 36).
31
Operating Aastra 6739i SIP Telephone
Notes
•
You can send short messages yourself via the web applications OpenCTI 50 and
Aastra CTI 800. Please refer to the OpenCom 100 / Aastra 800 communications
system online help for information.
•
Short messages can also be sent using the main menu: 3 Messages > 1 Short
messages > 3 New message (see page 36).
•
When you delete an e-mail message the e-mail itself is not deleted. You can query,
process and delete the e-mail with your e-mail programme.
Presence
The administrator of the OpenCom 100 / Aastra 800 communications system can configure a Presence function key (see Programming Function Keys starting on page 45).
The presence function is for communicating your presence status to an internal caller.
When there is a call, the text is shown on the display of the caller, as long as the caller's
telephone is a terminal. Change your status using a Presence function key.
1. Press the function key with the Presence function.
The Presence menu card appears. There are prepared status texts available.
2. Use the navigation keys
to select the desired status. If a presence
status is not to be shown to the caller, select the Available text. Confirm the text
selection by pressing the
softkey.
You can also enter your own text. Select the Text menu entry. Activate the Text:
input field. First enter the text (max. 22 characters, if any longer, will automatically
be shortened) and then press the Enter softkey.
The presence status is changed.
The softkey lights up red when activated. Exception: The “available” status is not indicated via softkey.
Tip:
Your presence status can also be set using the main menu:
3 Messages > 4 Presence (see page 36).
Notes
•
32
The settings of the Presence menu entry are saved on the communications
system and remain available after a re-start as well.
Operating Aastra 6739i SIP Telephone
•
Messages can also be entered via the OpenCTI 50 or Aastra CTI 800 web application. Please refer to the OpenCom 100 / Aastra 800 communications system
online help for information.
Busy Lamp Field
Use the “Busy Lamp Field” (BLF) to view another internal caller's state: free or busy.
You have to configure a separate BLF function key for every desired subscriber
number (please refer to Programming Function Keys starting on page 45).
The connection state of the user connected will be displayed on the function key as
follows:
•
Unlit (
): The caller is free. Press the BLF function key to call the caller.
•
Blinking ( ): The caller is being called. Press the BLF function key to accept the
call (“Pickup”).
•
Lit (
): The caller is busy.
33
SIP Telephone Menus Aastra 6739i
SIP Telephone Menus Aastra 6739i
Main menu
The main menu contains the system features of the OpenCom 100 / Aastra 800 communications system. These features are arranged in a menu tree. The main menu contains the following menu groups:
1 Calls
This is where the most important call-related features are grouped together.
Menu description: see page 35
2 Call forwarding
This menu group provides all types of call forwarding which you can programme on your telephone.
Menu description: see page 35
3 Messages
This menu group offers information on e-mails and short messages which you
have sent or received. Furthermore you can activate prepared message texts.
Menu description: see page 36
5 Protection
Among other things, you can activate the call protection or the telephone lock
in this menu group.
Menu description: see page 37
6 Connections
This menu group provides you with all the features that can affect a call.
Menu description: see page 38
9 Applications
This menu group contains all functions offered by your system telephone in
conjunction with additional programme packages of your communications
system.
Menu description: see page 39
34
SIP Telephone Menus Aastra 6739i
0 Central settings
This is where you can configure central settings for the communications
system. This is an optional menu item, it is only available if your system administrator has configured the appropriate authorisation for your user group.
Menu description: see page 40
1 Calls
1 Call lists: Displays the lists of missed and accepted calls (please refer to the chapter
Call Lists starting on page 17).
1 Missed calls: You see the call numbers of the callers who most recently tried
to reach you.
2 Accepted calls: You see the call numbers or the names of the callers with
whom you last spoke.
3 Voicebox mess. (voicebox messages): You see the list of received voicebox
messages and can listen to them and edit them (please refer to the
chapter Querying Voicebox Messages starting on page 26).
4 Hunt group: If your telephone belongs to one or multiple hunt group(s), use this
menu entry to switch hunt call signalling for your telephone on or off.
HG No.: [internal call number]: The pick-list of hunt group call numbers
appears. Activated hunt group calls have a “+” prefixing the hunt group
call number; deactivated ones have a “-”.
On/Off: switching hunt group calls on or off
All: switching all hunt group calls On/Off for your telephone
Note: If you are the last reachable member of the hunt group and you log out
then any further callers will hear a busy signal. Depending on the system configuration additional calls can also be directed to the exchange.
2 Call Forwarding
1 Call diversion: Programming call diversions for your own telephone (please refer to
the chapter Call Forwarding starting on page 24). The display shows a separate
line with Immediately, After delay or Busy for each type of call forwarding
along with the current status (“+” = on, “-” = off ).
35
SIP Telephone Menus Aastra 6739i
6 Follow Me: This type of call forwarding diverts calls from another terminal (source)
to your telephone. The PIN of the source terminal is required for this function. If
the “follow me” function is active, all call numbers of the other device are forwarded immediatelyto your telephone.
Source: Enter the internal call number from which calls are to be forwarded
and press the Enter softkey.
PIN: Enter the user PIN of the source and press the Enter softkey.
On/Off: Switching call forwarding on or off. You can switch “Follow me” call
forwarding off again on your own telephone or on the other terminal
via the Off option. You can also switch off “Divert call immediately” on
the other terminal. The menu entry displays the current status: “+” = on,
“-” = off.
3 Messages
1 Short messages: You can exchange short messages with other communications
system users with a system terminal.
1 Received mail: A list of senders of received messages is displayed. You can
display, forward or delete these messages (please refer to the chapter
Messages starting on page 31).
2 Outgoing mail: Short messages sent by you are displayed. These messages
can also be displayed, forwarded or deleted.
3 New message: You can send a message to another user. Activate the
Message: input field. First enter the text (max. 160 characters) and then
press the Enter softkey. Then activate the No.: input field. Enter the call
number of the message recipient and press the Enter softkey.
2 E-Mail: A list of senders who have sent you e-mails is displayed and you can query
the relevant e-mail information (sender, subject line, date/time received),
please refer to the chapter Messages starting on page 31.
4 Presence: You can inform other communications system users of your presence
status (please refer to the chapter Presence starting on page 32).
36
SIP Telephone Menus Aastra 6739i
5 Protection
1 Call protect: Switching signalling of calls on/off for all call numbers of your device
(please refer to the chapter Call Protection starting on page 28). The menu
entry displays the current status: “+” = on, “-” = off.
int./ext. calls (internal & external calls): You can activate call protection for
internal calls only, for external only or for all calls.
On/Off: Switching call signalling on or off
3 Telephone lock: If you wish to temporarily allow another person to use your telephone, you can activate the telephone lock. Then your telephone is given the
authorisations for the “Guests” user group. This user group is configured by the
system administrator and prevents unauthorised persons from accessing,
reading or making changes in the Main menu and its menu entries and lists on
your telephone. Dialling rights may also be restricted.
Please contact your system administrator for information on the altered range
of functions when the telephone lock is on. Telephone lock access is user-PIN
protected (default “0000”). After entering the PIN, activate / deactivate the
function with the On or Off option. The menu entry displays the current status:
“+” = on, “-” = off.
4 Baby call: The “Baby call” function dials a previously programmed internal or
external call number a specific time interval after picking up the handset. The
default time interval on the communications system is 5 seconds. The system
administrator can change this value. If you begin dialling a call number within
the specified time interval, the baby call is cancelled. The menu entry displays
the current status: “+” = on, “-” = off.
Dest.: Enter the destination call number for a baby call.
On/Off: switching baby call on or off
8 Call wait. prot. (call waiting protection): Switches baby call on/off (please refer to
the chapter Call Waiting Protection starting on page 28). The menu entry displays the current status: “+” = on, “-” = off.
On/Off: switching call-waiting protection on or off
0 Logout: If the system administrator for the system telephone has configured the
“Hot Desking” function and you are logged in to this system telephone as a
user, you can use this menu entry to log out. Please refer to the chapter Hot
Desking starting on page 30 for further information on this function.
37
SIP Telephone Menus Aastra 6739i
6 Connections
The following features are executed if the current connection state of your telephone
permits.
1 Call pick-up
1 Pick-up: You pick up the call intended for another telephone in your pick-up
group (see also the chapter Accepting a Call for Another Terminal
(Pickup from Group) starting on page 16).
If the called subscriber belongs to a user group with pick-up protection
activated, you cannot pick up calls for that person's call number.
2 Pick-up select. (pick-up selective): After entering the call number, you pick
up the call for any other telephone.
If the called subscriber belongs to a user group with pick-up protection
activated, you cannot pick up calls for that person's call number.
Note: If the other telephone is already in the call state (e. g. an answering
machine is making an announcement), you can pick up the call with “Pickup select.”. The subscriber for whom you picked up the call must belong to a
user group for which “Call removal” authorisation is activated, otherwise “Pickup select” is not possible.
3 Take: You wish to take a current call from one terminal over to your telephone and continue the call on the telephone. To be able to do so, your
telephone and the other terminal have to have the same internal call
number.
2 Dial
1 Announcement: You direct an announcement to other system terminals.
Under Dest: you enter the call number and press the Enter softkey.
Announcements can be configured on the following terminals: corded
Aastra 677x, OpenPhone 6x/7x type system telephones and DECT
Aastra 6x0d, Aastra 142d, OpenPhone 26/27/28 type system telephones.
Announcements can also be directed to call numbers where multiple
subscribers can be reached (e.g. a hunt group call number).
Note: If a called subscriber has announcement protection on, this
feature is not executed.
38
SIP Telephone Menus Aastra 6739i
2 Intercom: This function is for directing an announcement to a single system
terminal and the microphone is switched on on the system terminal
called. The subscriber called can answer you immediately without
having to press a key. Enter the device ID of the terminal under DeviceID: and press the Enter softkey. For information on the device IDs
available, contact your system administrator.
The Intercom function is for contacting the following terminals: corded
Aastra 677x, OpenPhone 6x/7x type system telephones and DECT
Aastra 6x0d, Aastra 142d, OpenPhone 26/27/28 type system telephones.
Note: If a called subscriber has call waiting protection on, this feature is
not executed.
4 Phone book: You open the OpenCom 100 / Aastra 800 phone book and can
call one of the subscribers listed there (please refer to the chapter Phone
Book starting on page 25).
6 Suppress number: Your call number is not transmitted to the called person
for the following (external or internal) call. This menu entry is
dependent on the system setting.
7 Transmit number: Your call number is transmitted to the person you call for
the following call. This menu entry is dependent on the system setting.
9 Applications
This menu card is only shown if the system administrator has set up additional programme packages for your communications system and you have the user authorisation to use these programmes.
1 Voicebox: This menu entry is only shown if the system administrator has installed
the additional programme package OpenVoice or Aastra Voice and configured a voicebox for you.
1 Voicebox mess. (voicebox messages): You see the list of received voicebox
messages and can listen to them and edit them (please refer to the
chapter Querying Voicebox Messages starting on page 26).
2 Call voicebox: You call your voicebox. The next steps are voice-controlled.
For detailed information please refer to the guide for the voicebox programmes OpenVoice and Aastra Voice.
39
SIP Telephone Menus Aastra 6739i
0 Central settings
The Central settings menu card is where you can set the date and time of the
OpenCom 100 / Aastra 800 communications system. The Date / Time menu entry is
available if the user group of your telephone has been granted Configurator - Expert
authorisation by the system administrator.
2 Date / Time: The date and time are taken over from the exchange on the first
external outgoing call. If this information is not transmitted by your network
operator, you can set the date and time here yourself.
Select the desired entry (time with hh:mm, date with dd.mm.yy) and press the
softkey
. Confirm the active setting and use the
Submit softkey to
confirm. To save the setting activate the Save menu entry and press the
softkey.
“Main menu” Menu Tree
1
2
3
5
6
9
0
Main menu
Calls
Call forwarding
Messages
Protection
Connections
Applications
Central settings
1 Calls
1 Call lists
4 Hunt group
1 Call lists
1 Missed calls
2 Accepted calls
3 Voicebox mess.
2 Call forwarding
1 Call diversion
6 Follow Me
1 Call diversion
1± immediately
2± After delay
3± Busy
3 Messages
1 Short messages
2 E-Mail
4 Presence
1 Short messages
1 Received mail
2 Outgoing mail
3 New message
5 Protection
1± Call protect
3± Telephone lock
4± Baby call..
8± Call wait. prot.
0 Logout
6 Connections
1 Call pick-up
2 Dial
9 Applications
1 Voicebox
0 Central settings
2 Datum / Time
40
1 Call pick-up
1 Pick-up
2 Pick-up select.
3 Take
1
2
4
6
7
2 Dial
Announcement
Intercom
Phone book
Suppress number
Transmit number
1 Voicebox
1 Voicebox mess.
2 Call voicebox
SIP Telephone Menus Aastra 6739i
The Options Menu
Some Aastra 6739i SIP telephone configuration settings are made via the Options
menu of the telephone. The Options menu offers the following sub-menus.
Audio: offers audio settings for the telephone, see page 41.
Display: offers display settings for the telephone, see page 42.
Bluetooth: offers settings for operating a Bluetooth headset, see page 43.
Status: contains telephone status information and error messages; a telephone restart or reset is also available in this sub-menu, see page 43.
Lock: offers locking the telephone against unauthorised usage, see page 43.
Note
Use the “Aastra 6739i SIP IP Phone User Guide” when you require information on the
wide variety of settings of the Options menu.
Audio
Press the
appears.
options key and then the Audio softkey. The Audio menu card
Audio Mode: Telephone calls can be conducted using the handset, a headset or via
the loudspeaker. You can set the following combinations to do so.
Speaker: This is the default setting. Telephone calls are conducted using the
handset or the loudspeaker (hands-free operation, see page 21).
Headset: Select this setting if you wish to conduct calls via the handset and via
the headset. A call can be transferred from the handset to the headset
by pressing
. To transfer from the headset to the handset, pick up
the handset.
Speaker/Headset: Incoming calls are first taken via the loudspeaker when
the
key is pressed. Use the
key to switch from the loudspeaker to the headset and vice versa during a call. You can continue the
call at anytime using the handset by picking up the handset.
Headset/Speaker: Incoming calls are first taken via the headset when
the
key is pressed. Use the
key to switch from the headset to
41
SIP Telephone Menus Aastra 6739i
the loudspeaker and vice versa during a call. You can continue the call at
anytime using the handset by picking up the handset.
Headset Device: Various headset types are supported by the Aastra 6739i SIP telephone.
Wired / DHSG / Bluetooth: Selection of headset types connected (see also
page 22 and page 23).
Headset Mic Volume: Setting headset microphone volume
Low / Medium / High: Select the desired volume.
Ring Tone: Each country setting (see the following Tone Set setting) offers multiple
ring tones.
Tone 1 to Tone 5: Ring tone selection
Silent: You switch off call signalling.
Tone Set: Selection of country-specific ring tones which are to be used for call signalling on the Aastra 6739i SIP telephone.
Note
The ring tones can also be set in the web configurator of the OpenCom 100 /
Aastra 800 communications system. Telephony menu: Devices: System phones.
Settings in the web configurator overwrite the settings on the telephone and vice
versa.
Display
Press the
appears.
options key and then the Display softkey. The Display menu card
Brightness Level: Setting display brightness
Level 1 to Level 5: Select the desired brightness (default setting is Level 3).
Brightness Timer: Setting the time interval in seconds that the display is to be lit after
a key /softkey is pressed.
Calibrate Screen: This menu entry is for calibrating the touchscreen display. Follow
the information and instructions shown on the display.
42
SIP Telephone Menus Aastra 6739i
Bluetooth
The Aastra 6739i SIP telephone supports operation of a Bluetooth headset. This submenu is where you can switch the Bluetooth function on and off. You can also add or
log out an available Bluetooth headset (please refer to the chapter Bluetooth Headset
Operational starting on page 23).
Status
The settings in this menu are for the administrator configuring the Aastra 6739i SIP
telephone.
Press the
options key and then the Status softkey. The Status menu card
appears. Use the following softkeys to access information on telephone status and
configuration settings.
Firmware: Press this softkey to display information on the current firmware version of
the telephone.
Network: Press this softkey to display information on the network settings of the telephone.
Restart: Press this softkey to re-start the telephone, see page 47.
Reset: Press this softkey to delete the local configuration of the telephone (see
page 48) or to reset the telephone to the factory settings (see page 48).
Error Msg (error messages): Press this softkey to display information on possible
errors. This information is relevant for support.
Lock
You can lock the Aastra 6739i SIP telephone to prevent unauthorised use. You must
use your user PIN to unlock the phone.
Locking telephone
1. Press the
The
options key and then the Lock softkey.
Lock menu card appears. Display shows: Lock the phone?
2. Press the Yes softkey.
43
SIP Telephone Menus Aastra 6739i
Unlocking telephone
1. Press the
The
options key.
Phone is locked menu card appears.
2. Press the Unlock the phone softkey.
3. Activate the Enter Unlock Password input field by pressing it. A softkey keyboard
appears on the display. Use the number keys to enter your user PIN and press the
Enter softkey.
Unlock the phone? appears on the display.
4. Press the Yes softkey.
Note
This function can also be programmed to a Phone lock function key, please refer to
page 45. Using this function key is described in the chapter Telephone Lock starting
on page 29.
“Options Menu” Menu Tree
Options List
Audio
Display
Bluetooth
Status
Lock
Audio
Audio Mode
Headset Device
Headset Mic Volume
Ring Tone
Tone Set
Display
Brightness Level
Brightness Timer
Calibrate Screen
Bluetooth
Bluetooth Status
Bluetooth Devices
Status
Firmware
Network
Restart
Reset
Error Msg
44
Audio Mode
Speaker
Headset
Speaker/Headset
Headset/Speaker
Headset Device
Wired
DHSG
Bluetooth
Headset Mic Volume
Low
Medium
High
Ring Tone
[Ring Tone 1…Ring Tone 5]
Silent
Tone Set
Germany
[other countries]
Configuring the Aastra 6739i SIP Telephone
Configuring the Aastra 6739i SIP
Telephone
This chapter describes the configuration settings relevant for operating the
Aastra 6739i SIP telephone on the OpenCom 100 / Aastra 800 communications
system.
A description of all possible settings of the Aastra 6739i can be found in your
“Aastra 6739i SIP IP Phone User Guide” (please refer to page 6).
Programming Function Keys
The function keys are implemented as softkeys. By switching between up to five
levels, the assignment capacities of each softkey are multiplied on the Aastra 6739i
SIP telephone.
With the Web Configurator of the OpenCom 100 / Aastra 800 communications system
the administrator can configure and change the following function keys for your
Aastra 6739i SIP telephone.
Note
When the administrator has assigned you the corresponding user authorisation you
can also change these settings yourself in the menu Telephony: Devices:
System phones of the Configurator. Consult the Configurator online help for further
information.
Function key reference
Key type
Parameter
Function
none
–
none
Destination
Call number,
Labelling
Direct dialling of a call number or code
procedure.
BLF
Call number,
Labelling
Busy Lamp Field; softkey shows when
subscriber is busy.
45
Configuring the Aastra 6739i SIP Telephone
Function key reference
Key type
Parameter
Function
Main menu
Labelling
Display of entire menu of the SIP system
telephone features supported on the
OpenCom 100 / Aastra 800
communicationssystem
Phone book
Labelling
Shows phone book managed by the
OpenCom 100 / Aastra 800 communications system.
Missed calls
Labelling
Shows the list of missed calls which is
managed on the OpenCom 100 /
Aastra 800 communications system;
softkey blinks red when there are missed
calls
Answered calls
Labelling
Shows list of answered calls accepted by
the OpenCom 100 / Aastra 800 communications system.
Speech
Labelling
Shows the list of recorded voicebox messages; softkey blinks red when there are
messages
Voicebox
Labelling
Calls your voicebox
Messages
Labelling
Displays the list of short messages and
e-mails received; softkey blinks red when
there are messages
Presence
Labelling
Display and change of your status as
present or absent; softkey blinks red
when status activated (exception: “Available” status not displayed by softkey)
Call forward
Labelling,
Int. + ext.
calls / Int.
calls / Ext.
calls
Displays “Call diversion” menu
46
Configuring the Aastra 6739i SIP Telephone
Function key reference
Key type
Parameter
Function
Call protection
Labelling
Switches call protection on or off; softkey
lights up red when function activated
Call waiting
protection
Labelling
Switches call waiting protection on or off;
softkey lights up red when function
activated
Pickup from group
Labelling
Picks up a call from another device in
your pickup group
Take
Labelling
Transfers an active call from another
device operated using your internal call
number
Phone lock
Labelling
Locks or unlocks the telephone
Logout
Labelling
Logs out the telephone and shows the
Login Display
XML
URL, Labelling
Calls the specified URL from a Web server.
Programmable function control via XML
data retrieval (please refer to the “Aastra
SIP IP Phone Administrator Guide”)
Restarting the Aastra 6739i SIP Telephone
You have to restart the Aastra 6739i SIP telephone sometimes, for example, to activate
a changed trunk key assignment.
1. Press the options key
and then the Status softkey.
The Status menu card appears.
2. Press the Restart softkey.
The display shows Restart Phone?
3. Press the Yes softkey.
The telephone starts and is quickly ready for operation once again.
47
Configuring the Aastra 6739i SIP Telephone
Deleting a Local Configuration
The Aastra 6739i SIP telephone saves local settings (e.g. audio settings) in a local configuration. Use the following procedure to delete the local configuration and to
restore the configuration that was configured in the Web Configurator of the
OpenCom 100 / Aastra 800 communications system.
1. Press the options key
and then the Status softkey.
The Status menu card appears.
2. Press the Reset softkey.
3. Press the Erase Local Cfg. softkey.
The telephone starts and is quickly ready for operation once again.
Restoring Factory Settings
Reset to factory settings upon configuration problems in conjunction with the
communications system OpenCom 100 / Aastra 800
If the Aastra 6739i SIP telephone cannot be configured via the OpenCom 100 /
Aastra 800 communications system you should reset to factory settings.
1. Press the options key
and then the Status softkey.
The Status menu card appears.
2. Press the Reset softkey.
3. Press the Factory Default softkey.
The telephone restarts and obtains its configuration from the OpenCom 100 /
Aastra 800 communications system.
Reset to factory settings after operation on another communications system
It is possible that you have been operating the Aastra 6739i SIP telephone with
another communications system or with an Internet SIP provider. To operate the telephone with the OpenCom 100 / Aastra 800 communications system, you should
restore factory settings.
1. Establish an Ethernet connection to the SIP telephone Aastra 6739i by connecting
it to the OpenCom 100 / Aastra 800 communications system. The telephone
requires a DHCP address to execute the restart.
48
Configuring the Aastra 6739i SIP Telephone
2. Wait until the telephone has started. Now press the options key
.
The Options list menu card appears.
3. Press the Advanced softkey.
The display shows Enter Administrator Password.
4. Enter the administrator password with the number keys (please refer to
Aastra 6739i SIP Telephone Passwords on page 49). Confirm using the
Enter softkey.
The Advanced menu card appears.
5. Press the Reset softkey.
The Reset menu card appears.
6. Press the Factory Default softkey.
The telephone restarts and obtains its configuration from the OpenCom 100 /
Aastra 800 communications system.
Aastra 6739i SIP Telephone Passwords
Certain functions of the Aastra 6739i SIP telephone can only be accessed via password
for security reasons:
•
Logging in to the telephone: Enter your call number and your user PIN (please
refer to Hot Desking starting on page 30).
•
Local settings on the telephone: The factory settings password is “22222”. After
the first log in of the telephone onto the OpenCom 100 / Aastra 800 communications system this password is overwritten by the communications system for
security reasons.
49
Configuring the Aastra 6739i SIP Telephone
Picture ID Server
The Aastra 6739i SIP telephone can show a picture of the caller on the display (for
both incoming and outgoing calls as well as for phone book entries, on the caller list
and on the redial list). To do so, there must be an image of the caller saved on the
communications system.
•
Images can be saved on a picture ID server with OpenCom 130/131/150,
OpenCom 510 and OpenCom X320 type communications systems. The address of
the Picture ID server is configured in the Web Configurator of the communications
system (System: Common menu).
•
An alternative to the picture ID server is saving the images to the phone book on a
Aastra 800 type communications system (Configurator, Phone book menu). A
separate image can be saved for each phone number in a phone book entry (office
call number, mobile number, private call number).
Please consult the communications system online help for information on the configuration and file format of the images.
Note
The Aastra 6739i SIP telephones have an internal clipboard for previously queried image files. This also saves the information “no image available”. You can re-start the
SIP telephone to have the modified image files displayed without delay (see also
page 47).
50
Index
Index
A
Aastra M670i 6
Aastra M675i 6
Administrator password 49
Announcement 38
Answered calls 46
D
Date
set 40
Destination 45
Display
Brightness 42
B
Baby call 37
Bluetooth 23
Busy lamp field 45
E
e-mail 36
emergency 29
Emergency calls 29
Enquiry 19
C
call diversion 24, 35
Follow me 36
Call forwarding 46
Call lists 17, 35
Call number
suppress 39
transmit 39
Call protection 47
call protection 28, 37
Call waiting protection 47
Caller key 8
Calls
pick-up 38
Call-waiting protection 28, 37
Call-waiting tone 15, 29
code procedures 22
Conference 19, 20
Conference key 8
Connections
Call pick-up 38
Dial 38
F
Factory settings 48
Follow me 36
Function keys 9
G
Goodbye key 9, 17
H
Handsfree 21
Handsfree key 9
Headset
Bluetooth 23
Select type 42
Setting audio mode 41
use 22
Hold key 8
Hot desking 30
hunt group 35
I
Input fields (display) 11
Intercom 39
51
Index
K
Key extensions 5
Aastra M670i 6
Aastra M675i 6
Pick-up 38
select 38
Pickup from group 47
Presence 36, 46
L
Logout 37, 47
R
Redial key 9
Restarting 47
M
Main menu 10, 46
applications 39
Call forwarding 35
Calls 35
central settings 40
Connections 38
Menu tree 40
messages 36
Overview 34
protection 37
Main menu, usage 11
Messages 46
messages 31
Missed calls 46
Mute key 9
O
Options key 8
Options menu
Bluetooth 43
display 42
lock 43
Menu tree 44
Status 43
Options menu, usage 11
P
Password 49
Phone book 25, 39, 46
Phone book key 8
Phone lock 29, 47
52
S
Short messages 31, 36, 46
Softkey keyboard 12
Speaker 21
Speech 46
Speed-dialling 14
T
Take 38, 47
Telephone lock 37
The Options Menu
Audio 41
Overview 41
Time
set 40
Toggle 19
Transfer 19, 20
Transfer key 8
Trunk keys 9
V
Voice mail key 9
Voicebox 27, 39, 46
voicebox messages 26
Volume
set 21
Volume control keys 9
X
XML 47
Copyright 2011 www.aastra.com
All rights reserved
As of 01.10.2011
Subject to changes
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising