Graco , Airless Striping Line Lazer

Graco , Airless Striping Line Lazer
Airless Striping
Applications
Advanced Paint Striping Solutions
www.graco.be
Trade Spray Services Ltd Call 01689 829001 www.tradespray.co.uk
CHOOSING THE RIGHT TIP FOR YOUR JOB IS ESSENTIAL
The spray tip affects a job’s profit margin as much as any other piece of equipment on the site.
• Optimize your performance
• Improve your work quality
• Control your costs
Airless Applications
Airless Striping
AIRLESS STRIPING APPLICATIONS
EVOLUTION
For over 13 years, Graco has been excelling in the manufacturing and engineering of advanced airless striping
solutions. Each new generation introduces new technologies and new features. We commit to continuously
improve and exceed our professional striping contractors demands.
DELIVERED
1995
1998
2002
LineLazer™
LineLazer™ II
LineLazer™ III
LineDriver™
Airless line quality
GMax™ pumping technologies
SmartControl™
with digital tracking system
Easy operation
Balanced cart system
Productivity (up to 3 times
faster than air spray systems)
Fast Track™ front caster design
QuickSelect™ gun selector
A I R L E S S
Easy Out™ Filter system
S T R I P I N G
UNIFORM
SHARP
FAST
COST
EFFECTIVE
SAFE
STRIPING PAINTS
Some lines have to last for as many as 1.000.000 passages over them.
New stringent laws and concerns for the environment guarantee that
paint will continue to evolve in the future. Every 3 years, Graco introduces
a new range of linestripers to be ahead of the evolution.
PRODUCTIVITY
Professional striping contractors strive for continuous improvement in
the line quality and definition. They need to complete a job quickly and
efficiently. They require maximum versatility of their system and easy adjustments.
At the same time, a system must be fast to set-up and fast to clean.
KEEPING AHEAD
LineLazers are 100%
compatible with waterborne paints.
LINES
Lines need to be even and remain consistent throughout the job.
They must be absolutely straight with sharp, crisp edges.
The paint must be evenly sprayed and the thickness maintained.
Pump built with stainless steel
and chromed parts
Specially treated filter block
Specially treated hose fittings
NO RUST
NO CHEMICAL REACTION
LINELAZER™ 3400
Totally new, the Linelazer 3400 is the ideal professional striper for smaller jobs.
Although capable of striping only one line at a time, its size, lightweight and new
features make the LineLazer 3400 ideal for maintenance work, parking lots, etc ...
Parking brake
Swivelling front wheel
LINELAZER™ 3400
PERFORMANCE
230 bar (max)
Enough power to evenly
atomise today’s thicker coatings.
Heavy duty gear system
& non-maintenance clutch
EASY HANDLING
Trouble-free operation
and low maintenance cost.
ELECTRONIC
PRESSURE CONTROL
Only 65 kg
Comfortable handle bar
Improves the general handling of the
machine as well as the line quality.
The bottom hook feature allows for
one finger pull back.
Easy operation
Endurance™ Pump technology
“on the job” service is easy.
The new chromex rod extends
the life of the pump while
ensuring full compatibility
with waterborne, solvent based
and even chlorinated paints.
Mounted directly in front of the operator
for “on the fly” adjustments and emergency
shut-off.
Extremely fast response time
The electronic pressure control guarantees
a system that maintains even pressure.
Essential for line striping.
Tall wheels
Greatly enhance the ease
of rolling while adding stability.
Gradual pumping speed
Eliminates pressure fluctuations
and deadbands.
LINELAZER™ 3400
Pushing and pulling the new
Linelazer 3400 is almost effortless.
LINELAZER™ IV
NEW EXCLUSIVE TECHNOLOGIES
The simple field demand, is a better line quality!
Graco systems are built with this objective in mind: “To design advanced striping
solutions for unmatched line quality”.
Of course, Graco also adds plenty of new features and accessories to fully complete
the LineLazer™ family for the professional striping contractor.
L I N E L A Z E R
™
I V
3 9 0 0
–
5 9 0 0
–
2 0 0
H S
ADVANCED VIBRATION REDUCTION SYSTEM (A.V.R.S.)
Observation
Uneven road surfaces and a running engine produce vibrations.
These get transferred to the striping gun(s) and thus prevent the guns
from maintaining a perfect fixed angle over the surface.
New concept
Without A.V.R.S.
Graco invents the AVRS system which reduces vibrations up to 60%.
Less vibrations simply results in better quality lines.
A.V.R.S.
Reduced vibrations are achieved with an exclusive pump sprayer mounting
system and a new single gun bar holder.
With A.V.R.S.
REAR GUN MOUNTING OPTION
Photo below is the result obtained while striping 2 lines simultaneously:
one gun mounted on the front and the second on the back.
Same machine, same speed, same paint.
Straighter lines
Lining up the gun(s) with the two back wheels and axles results in straighter lines.
Front & rear mount
Mounting the gun on the front of the machine is a requirement to stripe up to the curb
on a parking lot. However, for long line pavement applications, mounting the gun
on the back improves straightness and consistency of the lines.
Easy
The rear gun mounting option eliminates the need to reverse the mount
of the engine and the handle.
Rear mount
NEW DASHBOARD
Back lit display
Allows visibility of all important information at night
or any other low light conditions.
Easy height adjustment
Simply slide the dashboard (and not the whole handle bar)
up and down in 3 different height options.
Accessory plug-in
Together with the light switch a “headphone” style
connector is added on the dashboard.
Front mount
LINELAZER™ IV 3900 & 5900
Both the Linelazer 3900 and 5900 have been redesigned with all the new technologies
of Linelazer IV to deliver precise and consistent lines. Ideal for parking lots and for street marking.
These are versatile linestripers. Their performance meets the requirements of municipalities and small cities.
Easy hose wrap
Flow through filter:
cleaner and simpler
LINELAZER™ IV 3900 & 5900
EASE OF USE
Versatile
PERFORMANCE
Gun (dis)mounting
COMFORTABLE HANDLING
No tools gun removal for quick
and easy handling.
New handle bar design
Precision through the concept
Natural and comfortable extension of
your arms. Eliminates some of the natural
sideway motions created while walking.
New GMAX™ II pumping systems
9% more flow for the
LineLazer IV 3900 and 7%
more flow for the LineLazer IV 5900.
Increased flow
Faster striping and
higher productivity.
The new gun mount and gun adjuster
are made out of one piece of extruded
aluminium.
The special design automatically aligns
the gun position perfectly and consistently.
Less lateral movement
Straighter and more consistent lines.
Centralised controls
Larger Endurance™ pump
Provides easy service.
Upgraded with Chromex™ piston rod.
The dashboard, with all controls,
are right in front of the operator
for fast and precise control.
LINELAZER™ IV 3900 & 5900
Line stripers are not used solely for line
marking. Being airless machines, they
also do stenciling and general painting.
LINELAZER™ IV 200HS
This is the “workhorse” of the LineLazer family. It has the most flow and is powered by a very heavy duty
hydraulic system. The choice for intensive line striping. Used by large cities and airports, this machine will
do everything from parking lots to street marking with unmatched production rate and trouble-free operation.
QuickSelect™
gun selector
Front swivel wheel
with Fast Track™ system
LINELAZER™ IV 200HS
MOUNTING TECHNOLOGIES
Gun shut-off feature
The one piece, forged aluminium gun
mount has now a spring for faster and
positive gun shut-off. No need to keep a
finger on top of lever to shut the gun(s) off.
HIGH CAPACITY SYSTEM
LINELAZER™ IV 200HS
Hydraulic system
Heat is naturally generated
by a hydraulic system. Keeping
a hydraulic system cool is the
key for long life and trouble
free operation.
Graco design
The hydraulic reservoir capacity has
been increased by 20% and the fan
design provides 70% more flow to
keep the system cool.
ABS belt cover
Easy to clean, won’t rust,
won’t crack or bend.
A.V.R.S.
The LineLazer IV unique mount system
eliminates up to 60%
of the vibrations. Allows for straighter,
sharper and more precise lines.
PERFORMANCE
High flow
Largest pump in the LineLazer IV family.
Chromex™ piston rod
Perfect belt alignment
Better power transfer efficiency while
extending the belts life.
No need to adjust the belt tension.
Up to 4 times harder than chrome.
This coating technology extends the life
of your wear parts while being 100%
compatible with waterborne and solvent
based paints.
LINEDRIVER™ - LINEDRIVER™ HD
Accessory to an airless striping machine. Transforms your striper into a ride-on push and pull,
hydrostatic driver. It doubles your production rate and improves line quality while reducing operator’s fatigue.
Standard high capacity,
fully adjustable light kit.
Padded seat with 12 positions
for exterior use. Under seat storage.
LINEDRIVER™ - LINEDRIVER™ HD
IMPROVED LINE QUALITY
Precise hydrostatic drive
HYDROSTATIC
ADVANTAGES
Finish your jobs in half the time
Striping can be done faster
compared to manually pushing.
Save more time on all distances
travelled while not striping.
1 hydraulic drive per wheel
Having the same force on each wheel
guarantees a straighter line. This eliminates
the natural side-to-side motion a person
produces while walking.
Easy to use
Only change the oil to maintain the system.
No belts, chains or gears to adjust or
change.
High operator comfort
There is a physical limit as to how long
a person can push a machine each day.
Differences in street
levels make manual work more difficult.
The LineDriver overcomes these considerations.
Independent Honda engine
The LineDriver does not tax
power from the striper engine.
For tight striping jobs, just
disassemble and use the striper
on its own. The weight of the hydraulic
and engine power is on the LineDriver,
not on the striper.
Carry more paint
The power of the LineDriver enables
carrying extra paint on board.
Less time is lost for refills.
LineDriver drives
On reverse, the LineDriver
pulls back. On forward it pushes.
Very simple and intuitive.
LINEDRIVER™ - LINEDRIVER™ HD
IMPROVED PRODUCTIVITY
Once the average, micron build is achieved,
the LineDriver makes it easy to maintain
the correct speed to reproduce exactly the
same thickness throughout the job.
AIRLESS STRIPING APPLICATIONS
ROADLAZER™
Graco’s striping expertise extends further
than just parking lots and streets. For many
years, Graco has been able to satisfy many
large contractors with its range of
RoadLazer products.
FIELDLAZER™
HYDRAULIC MOTOR/
PUMP ASSEMBLIES
QUALITY LINES
OEM SUPPLIES
With the FieldLazer, Graco introduces airless
spraying advantages to fields. Unlike transfer
pumps, that disperse, the airless principle
atomises paint. This results is uniform, bright
lines in only one pass.
Being one of the world leading manufacturers
of paint pumps, Graco also offers a wide range
of parts and accessories to fulfil almost any
integration requirements.
GH ROOF RIGS
CONFIGURATION
Available as a 1, 2 or 3 pumps machine.
Now also available on a palette version for
mounting on the bed of a truck.
LIGHTWEIGHT
With only 36 kg, the FieldLazer is one of the
lightest equipments available today for sports
fields. This greatly reduces operator’s fatigue
and enhances manoeuvrability for corners and
center field circle.
Graco further completes these
proposals with its GH “roof rigs” sprayer, that
can be used for striping applications as well.
ACCESSORIES
APPLICATIONS
As the RoadLazer 3 pump version is the only
striper capable of striping the “yellow-blackyellow” lines in one pass only, it is particularly
well-suited for airports.
COMPACT
All the abilities of a striping truck built in a
“tow-behind” configuration. Takes limited
storage space.
No need for a dedicated striping truck.
*Check your local laws for traffic regulations
EXTRAS
Find more product information in the
Graco RoadLazer brochure, part number 300430.
VERSATILE
With its airless pump, painting of logos and
letters on the field is extremely simplified.
With the extra large filter mounted on-board,
together with the self-cleaning tip, tip clogs
and their hassles are a problem of the past.
From various filter elements, agitators,
fittings to all kinds of automatic paint and
bead guns, etc, Graco has a product solution
for your needs.
AIRLESS STRIPING APPLICATIONS
T E C H N I C A L
S P E C I F I C A T I O N S
LineLazer 3400
LineLazer IV 5900
LineLazer IV 3900
LineLazer IV 200HS
LineDriver/LineDriver HD
262004
262005 (HD)
Part number
1 gun
2 guns
249007
x
249008
249009
249010
249011
249012
249013
Max.
tip sizes
1 gun
2 guns
0.027"
x
0.035"
0.025"
0.043"
0.029"
0.045"
0.033"
x
x
2.8 l/min
4.7 l/min
6.0 l/min
7.5 l/min
x
25%
x
Max.
fluid flow
28%
66%
Output
difference
->
more than LineLazer 3400
->
more than LineLazer IV 3900
->
more than LineLazer IV 5900
Max.
pressure
230 bar
230 bar
230 bar
230 bar
x
Honda engines
120 cc (3 kW)
120 cc (3 kW)
160 cc (4 kW)
160 cc (4 kW)
Fuel tank
capacity
2.5 liter
2.5 liter
3.6 liter
3.6 liter
160 cc (4,1 kW)
200 cc (4,83 kW)
3.6 liter
Weight
65 kg
96 kg
105 kg
125 kg
120-125 kg
Dimensions
in cm
(w x h x l)
81 x 162 x 155
81 x 102 x 165
81 x 102 x 165
81 x 102 x 165
66 x 104 x 147
O P E R A T I N G
S P E E D
SmartControl™
Given average thickness of 300 microns over 10 cm lines
LineLazer 3400
LineLazer IV 3900 (1)
LineLazer IV 3900 (2)
PRESSURE
LineLazer IV 5900 (1)
SPEED
JOB TOTAL FILM
BUILD
LineLazer IV 200HS (1)
JOB DISTANCE
METER
LineLazer IV 200HS (2)
0
1
Km/H
2
3
4
5
SCHOOLS
6
7
8
9
10
11
TOWNS / MUNICIPALITIES
12
13
14
15
16
CITIES / AIRPORTS
JOB MATERIAL
COUNTER
LINE WIDTH
SELECTOR
SMARTCONTROL™
LineLazer IV 5900 (2)
AIRLESS STRIPING
248157
277061
FlexPlus™ striping gun.
Mounted with HandTite™ guard
and LL5319 striping tip
High output LED light kit
(LL IV only).
Includes multiposition mounting
hardware and 70 cm cable for
mounting flexibility.
EZ BEAD™ GLASS BEAD
APPLICATION SYSTEM
Dispense beads mechanically and by gravity.
Dispersing heads can be adjusted with trap-doors
for 5 cm, 10 cm and 15 cm.
EZ bead hopper is reversible for use on both sides
of the striper.
277064
277065
243161
HandTite guard 7/8”
277067
™
248393
60 liter hopper kit
with insulated RIM
240717
Pail cover (euro size)
Complete EZ bead system
with 2 dispensers
Complete EZ bead system
with 1 dispenser
Disperser kit
(contains 1 dispenser + hose)
245225 Striping hose with E-nickel fittings.
3/8” x 15 m (230 bar)
245798 Striping hose with E-nickel fittings.
1/4” x 1,8 m (230 bar)
* Only use these hoses with striping to
avoid chemical reactions with water-based
materials.
287626
AIRLESS STRIPING APPLICATIONS - ACCESSORIES
287553
2nd gun kit for LineLazer III
(includes LL5319 + 286517)
241284
2nd gun kit for LineLazer II
(includes LL5319 + 286517)
277062
64 cm Line pointer system:
Wide blade allows
operators to
follow stripe
or
“see-through”
for “e” stripe.
EZ bead 30 cm bead dispenser kit.
Includes trap-doors to apply beads
over 10 cm, 20 cm or full 30 cm.
277066
EZ bead wind deflectors (15 cm)
6 per pack
EZ bead wind deflectors (30 cm)
3 per pack
50 cm adjustable width striping
ramp. Includes 2 swivel heads,
100% waterborne compatible
and 2 tips
2nd gun kit for LineLazer IV
(includes LL5319 + 286517)
245465
245516
245520
249187
Field tires kit for LL 3900/5900
or 200HS. Wide, low pressure
turf tires. To upgrade your
LineLazer for field striping
LINEDRIVER™
249081
244071
244067
244068
244069
Adjustable spray shield kit.
Attaches directly onto existing
LineLazer to contain spray pattern
within set width limits.
EasyOut™ pump filter, 30 mesh,
grey
EasyOut Pump filter, 60 mesh,
black
EasyOut Pump filter, 100 mesh,
blue
EasyOut pump filter, 200 mesh,
red
245343
Battery kit for LineDriver
(auxiliary)
245321
Hitch kit for LineDriver
245340
Replacement wheel kit
LineDriver
249089
Field tires kit for LineDriver.
Wide, low pressure turf tires.
To upgrade your LineDriver™
for field striping.
AIRLESS STRIPING APPLICATIONS
S T R I P I N G
T I P S
LineLazer™ tips are especially designed
to create clean, lazer sharp lines with no fuzzy edges.
17 new tip sizes added to the range
to match the higher performances of the LineLazer™ IV family.
New easy tip clog removal.
You no longer need to turn the tip assembly to unplug the tip.
Simpler and faster operation.
P O S I T I O N I N G
L L 5
T I P
S E L E C T I O N
C H A R T
Line width is measured with the tip positioned 15 cm above
the surface. Width can be adjusted by lowering or raising the gun.
To order: LL5-XXX. Replace the XXX with the chosen tip size.
Orifice sizes
Line width
5 cm
10 cm
15 cm
30 cm
Flow rate
l/min
0.013” 0.015” 0.017” 0.019” 0.021” 0.023” 0.025” 0.027” 0.029” 0.031” 0.033” 0.035” 0.039”
219
213
217
215
325
329
327
319
323
321
317
315
335
333
331
425
429
427
419
423
421
417
435
431
625
629
627
623
621
635
639
631
2.54
3.42
2.96
1.47
2.15
1.79
.69
1.17
.91
6.18
7.51
4.98
4.42
STRIPING TIPS
Make sure that the flow rate of the tip is within the performance ability of the striper.
ABOUT GRACO
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used
in vehicle lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco
offers systems, products and technology that set the quality standard in a wide range of fluid handling
solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,
and dispensing sealants and adhesives, along with power application equipment for the contractor
industry. Graco’s ongoing investment in fluid management and control will continue to provide
innovative solutions to a diverse global market.
GRACO LOCATIONS
CONTACT
AMERICAS
EUROPE
MAILING ADDRESS
MINNESOTA
BELGIUM
P.O. Box 1441
Minneapolis, MN 55440-1441
Tel: 612.623.6000
Fax: 612.623.6777
Worldwide Headquarters
Graco Inc.
88-11th Avenue N.E.
Minneapolis, MN 55413
European Headquarters
Graco N.V.
Industrieterrein-Oude Bunders
Slakweidestraat 31
3630 Maasmechelen,
Belgium
Tel: 32.89.770.700
Fax: 32.89.770.777
ASIA PACIFIC
ASIA PACIFIC
ASIA PACIFIC
JAPAN
CHINA
KOREA
Graco K.K.
1-27-12 Hayabuchi
Tsuzuki-ku
Yokohama City, Japan 2240025
Tel: 81.45.593.7300
Fax: 81.45.593.7301
Graco Hong Kong Ltd.
Representative Office
Room 118 1st Floor
No.2 Xin Yuan Building
No.509 Cao Bao Road
Shanghai, P.R. China 200233
Tel: 86.21.649.50088
Fax: 86.21.649.50077
Graco Korea Inc.
Choheung Bank Building
4th Floor #1599
Gwanyang-Dong, Dongan-Ku,
Anyang-Si, Gyunggi-Do,
Korea 431-060
Tel: 82(Korea).31.476.9400
Fax: 82(Korea).31.476.9801
All written and visual data contained in this document are based on the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Graco is certified ISO 9001.
Trade Spray Services Ltd
Europe
+32 89 770 700
FAX +32 89 770 777
WWW.GRACO.BE
Unit 7 Oasthouse Way
Orpington Kent
BR5 3PT
01689 829001
www.tradespray.co.uk
©2005 Graco N.V. 336673 E Rev. C 01/08 Printed in Europe.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising