Fluke 115 Datasheet
Fluke 115
Multimeter
Technical Data
Compact true-rms meter for
field service technicians
The Fluke 115 is the solution for a wide
variety of electrical and electronic testing applications. This true-rms meter
provides easy one-handed operation in
a compact package.
Features include:
• Resistance, continuity, frequency, capacitance, and diode test
• Measures 10 A (20 A overload for 30 seconds)
• Large white LED backlight to work in poorly lit areas
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak™)
• True-rms for accurate measurements on non-linear loads
• Min/Max/Average with elapsed time to record signal
fluctuations
• CAT III 600 V safety rated
General specifications
Accuracy is specified for 1 year after calibration, at operating
temperatures of 18 °C to 28 °C, with relative humidity at
0 % to 90 %.
The accuracy specifications take the form of:
± ( [ % of reading ] + [ counts ] )
Maximum voltage between any
terminal and earth ground
Surge protection
Fuse for A input
Actual size
Display
Bar graph
Operating temperature
Storage temperature
Battery
Battery life
R
N10140
600 V
6 kV peak per IEC 61010-1 600 V
CAT III, Pollution Degree 2
11 A, 1000 V FAST Fuse
(Fluke PN 803293)
Digital: 6,000 counts, updates 4/sec
33 segments, updates 32/sec
-10 °C to + 50 °C
-40 °C to + 60 °C
9 volt Alkaline, NEDA 1604A/
IEC 6LR61
400 hours typical, without backlight
Accuracy specifications
Measurement
Range
Resolution
Accuracy ± ([% of reading] + [counts])
DC millivolts
600.0 mV
0.1 mV
0.5 % + 2
Ordering
information
DC volts
6.000 V
0.001 V
60.00 V
0.01 V
0.5 % + 2
Fluke-115
600.0 V
0.1 V
Included
TL75 Test leads, holster, User’s
manual and 9 V battery (installed).
Auto volts
600.0 V
0.1 V
2.0 % + 3 (dc, 45 Hz to 500 Hz)
4.0 % + 3 (500 Hz to 1 kHz)
AC millivolts1
true-rms
600.0 mV
0.1 mV
1.0 % + 3 (dc, 45 Hz to 500 Hz)
2.0 % + 3 (500 Hz to 1 kHz)
AC volts1 true-rms
6.000 V
0.001 V
60.00 V
0.01 V
600.0 V
0.1 V
600 Ω
1Ω
Beeper on < 20 Ω off > 250 Ω; detects
opens or shorts of 500 µs or longer.
0.9 % + 2
Continuity
Ohms
600.0 Ω
0.1 Ω
6.000 kΩ
0.001 kΩ
60.00 kΩ
0.01 kΩ
600.0 kΩ
0.1 kΩ
6.000 MΩ
0.001 MΩ
1.0 % + 3 (45 Hz to 500 Hz)
2.0 % + 3 (500 Hz to 1 kHz)
0.9 % + 1
40.00 MΩ
0.01 MΩ
5%+2
Diode test
2.000 V
0.001 V
0.9 % + 2
Capacitance
1000 nF
1 nF
10.00 µF
0.01 µF
100.0 µF
0.1 µF
9999 µF
1 µF
100 µF to 1000 µF
1.9 % + 2
1.9 % + 2
> 1000 µF
5 % + 20
Lo-Z capacitance
1 nF to 500 µF
10 % + 2 typical
AC amps true-rms
(45 Hz to 500 Hz)
6.000 A
10.00 A
Multimeter
0.001 A
0.01 A
1.5 % + 3
20 A overload for 30 seconds max.
DC amps
6.000 A
0.001 A
10.00 A
0.01 A
1.0 % + 3
Fluke.Keeping your world
up and running.™
20 A overload for 30 seconds max.
Hz (V or A input)2
99.99 Hz
0.01 Hz
999.9 Hz
0.1 Hz
9.999 kHz
0.001 kHz
50.00 kHz
0.01 kHz
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
0.1 % + 2
Notes:
1All ac voltage ranges are specified from 1 % to 100 % of range. Because inputs below 1 % of range are not specified,
it is normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected
from a circuit or are shorted together. For volts, crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full
scale. AC volts is ac coupled and ac mV is dc coupled.
2Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage. Frequency is dc coupled, 45 Hz to 5 kHz for ac current.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa (31 40) 2 675 200 or
Fax (31 40) 2 675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2006-2009 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 2/2009 2634043 D-EN-N Rev C
Modification of this document is not permitted
without written permission from Fluke Corporation.
2 Fluke Corporation
115 Multimeter
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising