Mio Cyclo™ V4.4
software improvements
The improvements of software update V4.4
at a glance
We are pleased to announce our software update for Cyclo Series, which is based on recent market
feedback. This V4.4 update with all its new features is now available for the Cyclo 310, 315, 500 and 505.
The improvements:
• Adding Strava Live Segments
• Adding the Node option
• Enable/disable auto recording
• Adding two extra info fields dashboard screens
• Adding ferries back as a route option
The improvements of software update V4.4
at a glance
The two improvements for Cyclo 315 and/or 505 only:
• Update crank set and cassette values for Shimano XTR M9050 Di2 (Cyclo 315 and Cyclo 505)
• Name changing of the trainer name “Elite” to “Elite Qubo Digital” (Cyclo 505 only)
On the next pages you can find more detailed information per feature,
and at the end we have enclosed a user guide for Strava Live Segments.
We would like to thank you for your feedback, on which these
improvements are based. We wish you a challenging,
fun and exciting cycling season!
LIVE SEGMENTS
Cyclo 310, 315, 500, 505 only:
Adding Strava Live Segments
• Ride Strava Live Segments with your Cyclo and seamlessly sync your results with Strava via
MioShareTM.
• Strava Live Segments designate a portion of a route where users can compete for time.
These segments are user-created and user-edited and are available for all premium Strava users.
• The track segments are used competitively to compare ones results with one’s personal record
or against other competitors thus pushing oneself to improve constantly.
• An overview of all the participants and their results is maintained on Strava,
so one can always look back to his or her own position in the listing.
• You can find a detailed user guide at the end of this document.
Adding the Node option
• Belgium and Dutch users will be able to select the cycle route nodes that are available in these
two countries when navigating or creating a track. These nodes are specific coordinates that enable a
user to create a track or navigate a route using these pre-numbered coordinates as a preferred option
instead of just navigating and have the device determine the route.
Enable/disable auto recording
•
Users will be able to enable or disable the auto record option on the device.
The auto record option is activated by default. We now added the option to turn this off.
This is to prevent the device from recording when this is not wanted.
Auto record, when activated, will restart a recording after the device has been inactive for a while,
pausing the recording, thus making sure that the user does not accidentally forget to press “record”
again. Auto record starts as soon as motion is detected.
Adding 2 extra info field dashboard screens
• Users with multiple bicycles/profiles now have 2 additional info fields available on the dashboard
screen, so they can save the info fields for both bicycles/profiles without having to edit every time
they change bicycle.
Adding ferries back as a route setting option
• On popular demand we added ferry crossings again for route options. The ferry crossings will be
optional in the menu. We also added routing via ferry route in bike profile for TA CEU to Denmark.
Cyclo 315 and Cyclo 505 only:
Update crank set and cassette values for
Shimano XTR M9050 Di2
• Added the following: 11-Speed cassette: 11-13-15-17-19-21-24-27-31-35-40
• Crankset: 40-30-22
• Support Shimano Di2 remote control for switching dashboard pages and start/stop recording
Cyclo 505 only:
Name changing of the trainer name “Elite”
to “Elite Qubo Digital”.
• To be more specific which device is compatible.
Bug fixes:
•
•
•
•
•
•
•
•
•
•
Time zone issue in South-Australia,
Negative values in History Totals,
Average active speed & total distance is missing in history,
Cycle paths not used,
Issue with date/time zone when viewing recording & uploading.
Fine tuned map color scheme to improve visibility when navigating tracks in the forest or woods,
Fixed time zone issue when 1st time device boot,
Dashboard Info 1 page now is configurable,
Support of GPX file including multiple <trk> tags,
Settings menu restructure – system related settings integrated into System settings.
STRAVA LIVE SEGMENTS
more details
What are Strava Live Segments?
Strava Live Segments designate a portion of a route where users can compete for time.
These segments are user-created and user-edited and are available for all premium Strava users.
The track segments are used competitively to compare ones results with one’s personal record or
against other competitors thus pushing oneself to improve constantly.
An overview of all the participants and their results is maintained on Strava so one can always
look back to his or her own position in the table.
So from now on this very popular option is available on your Mio Cyclo™.
How to use this feature?
1. Make sure you link your MioShare account with Strava
(Account > Synchronisation settings > Strava > Link my account).
2. Log in to your (premium) Strava account.
3. Click “Explore” and select “Segment Explore” (in your area) or “Segment Search” (search anywhere).
4. Mark your favorite segment(s) by clicking on the star in front of that segment.
5. Synchronise your device with MioShare using the CycloAgent or WIFI sync.
6. The marked segments will shortly be visible on your device
7. Only cycling segments will be synced with your Mio.
8. It will take a few minutes for Strava to re-calculate and update the rankings after the automatic
synchronisation with MioShare. To make sure you use the latest Strava ranking stats, it is
recommended to re-sync your segments to your Cyclo before every use; this will refresh the
rankings and results.
Connect your device with your PC and start the CycloAgent.
The segments are placed on your device during synchronisation.
Disconnect your device from your PC and start it up.
Go to Settings > Manage and select Strava Live Segments
Click the segments you want to activate and make sure the notifications are turned
on for the segments (Settings > Alerts)*.
* Segment Alerts
Once a segment is activated, you can choose your virtual rival from the following options:
• KOM (Qom in case of a female participant); this is the record holder for this segment.
• Personal Record (this is your previous record for this particular segment).
• Ranking Followee.
You now have two options to ride the segments.
Option 1
You can simply cycle a random route and record it; as soon as you are within the vicinity of a segment
your device will notify you. You can ignore this segment in the pop up window using the “dismiss”
button or you can move towards the orange flag (starting point of the segment). The segment itself is
displayed in red.
Option 2
You can also go to the main menu of your device and click “Navigate”. Then click “Segments” and
select the segment you want to ride.
Click “GO” and you will be directed to the starting point of the segment.
250 meters before the start of the segment, you will get a pop up window and unit will beep twice.
You can dismiss the segment in the pop up window.
If you ignore the “dismiss” button by pressing the home key on your device or after waiting a few
seconds, the device will return to the map with the orange flag as the starting point of the segment,
the segment marked in red, the distance towards the segment and your target time.
As you reach the start of the segment you will hear
3 beeps and “GO” will appear on your screen.
During the segment, the screen will show the remaining distance and your performance at that
moment; ergo how many seconds ahead or behind set target.
These data fields are customizable via Settings > Dashboard > Segments
As soon as you pass the virtual finish line, your results compared to your virtual opponent will
be shown on the screen of your Mio Cyclo
To view your results in Strava you just need to connect your device to your PC and start the CycloAgent.
Your data will be synced with MioShare and Strava. (Devices with WIFI can be synced using “WIFI Sync”).
Important:
• MioShare must be in sync with Strava.
• Segments must be selected as favorite in Strava (Strava Premium only).
• Device must be synced with MioShare.
• Segments must be activated on device (default).
• Device must be in recording mode
• Alerts for segments need to be activated on device.
• You must use a bicycle profile.
• A maximum of 60 segments can be synced to device.
• If “Popular Local Segment” option is enabled, 10 popular segments in and around your
Strava registered home town will be downloaded as well.
• Existing MioShare users who are already linked to Strava need to enable the
Segment options manually. These options will not be auto-enabled.
Quick summary
1. Log in to your Premium Stava Account
2. Select one or more segments as a favorite
3. Synchronise your device with your MioShare account
4. On your device, select a bicycle profile
5. Go to Setting > Notifications > Strava Live Segments > activate them
6. Go to Settings > Manage > Strava Live Segments > activate one or more segments
7. Option 1 > Cycle a random route while recording; your device will indicate when you are nearing a
saved and activated segment and lead you towards it if you chose to do so
Option 2 > Go to Navigation > Strava Live Segments > Select a segment and GO
8. Synchronise with MioShare after you’re finished to view your results in Strava
* The screenshots are only an indication of what the screen will look like,
for your convenience. This is not based on final software yet and only used for
reference; the final screenshots may look differently
">
