Husky Series S Series X Series AC Winches S

Husky Series S Series X Series AC Winches S
Husky Series
S Series
10,000 lb. / 4536 kg
11,500 lb. / 5216 kg Stall
2404 12VDC
Husky 10
Specifications:
Motor:2.1 hp 12VDC Series Wound
Wire Rope:3/8" x 90' (10mm x 27.4m)
• Power In and Power Out
• Freespooling
• Remote Mountable Solenoid Station
with 12' Handheld Remote Switc h
Shown With Optional Roller Fairlead
8,500 lb. / 3856 kg.
9,200 lb. / 4173 kg. Stall
2401 12VDC
Husky 8
S9000
1680
S6000
1901 12VDC
Specifications:
Motor:2.0 hp 12VDC Series Wound
Wire Rope:5/16" x 100' (7.9mm x 30.5m)
• Power In and Power Out
• Remote Mountable Solenoid Station
with 12' Handheld Remote Switch
• Freespooling
• Automatic In-The-Drum Braking
Shown With Optional Roller Fairlead
1,000 lb. / 454 kg
2,400 lb. / 1089 kg Stall
1916 12VDC Without Roller Fairlead
1917 12VDC With Roller Fairlead
1141
01002
01052
1181
Specifications:
Motor:2.0 hp 12VDC Series Wound
Wire Rope:5/16" x 100' (7.9mm x 30.5m)
• Power In and Power Out
• Freespooling
• Integrated Prewired Solenoid System
with 12' Handheld Remote Switch
• Automatic In-The-Drum Braking
4,500 lb. / 2041 kg
5,100 lb. / 2313 kg Stall
04512
04532
04512
12VDC With Roller Fairlead
Specifications:
Motor:1.6 hp 12VDC
Wire Rope:5/16" x 100' (7.9mm x 30.5m)
• Power In and Power Out
• Freespooling
• Integrated Prewired Solenoid System
with 12' Handheld Remote Switch
• Automatic In-The-Drum Braking
S4500
03512
03512 12VDC Remote Handheld Switch,
†
Hawse Fairlead and Brake
12VDC Remote Handheld Switch
and Roller Fairlead and Brake
50%
1,850
2,800
4,655
6,518
8,300
70%
1,550 lbs.
2,300 lbs.
3,817 lbs.
5,344 lbs.
6,870 lbs.
1646 12VDC
X6CD
Winches are not intended for the transportation of people.
Specifications:
Motor:1.6 hp 12VDC
Wire Rope:5/16" x 100' (7.9mm x 30.5m)
• Power In and Power Out
• Remote Mountable Solenoid Station
with 12' Handheld Remote Switch
• Freespooling
• Automatic In-The-Drum Braking
Boat Length
Outboards to 17' (5.2 m)
Outboards to 18' (5.5 m)
Outboards, I/O’s to 22’ (6.7 m)
Over 22' (6.7 m)
Over 22' (6.7 m)
S3500
X1
1110
02500
02512 0 2 5 0 2
† 02512
Weight Lbs.
2,500 (1,134)
3,500 (1,588)
6,000 (2,722)
9,300 (4,218)
11,500 (5,216)
†
In some cases, winches with 50' of rope will not achieve these loads. This is because the extra layers of rope
make a turning diameter that is too large. On EX1, X1, S2500, S3500,and S4500 the grub screw in the drum
can be loosened, the excess rope pulled through the drum and cut, and the screw re-tightened. On X2, X3,
a shorter wire rope assembly can be fitted.
All ratings are for bottom layer of wire rope.
S2500
Shown With Optional Roller Fairlead
Winches are not intended for the transportation of people.
02532
1401 120V 50/60hz
1499 240V 50/60hz
Specifications:
Motor:.6 hp
Wire Rope:5/32" x 45' (4mm x 13.7m)
• Power In and Power Out
• 6’ (1.82m) Pendant Switch
• Operates on House Current
• Circuit Breaker
• Wire Rope Tensioning Plate
1401
AC1000
01508
12VDC
ATV2000
01599
12VDC
2,000 lb. / 907 kg
2,300 lb. / 1043 kg Stall
Winches are not intended for the transportation of people.
T1500 and ATV2000 Standard Features
• Power In and Power Out
• Freespooling
• Power Leads with Terminals
• Circuit Breaker
• Remote Mounted Switch
• Wire Rope Tensioning Plate
Full Metal Cap
and Body,
1
⁄4Turn
from 2WD
to 4WD
Cast Iron
Drive Gear
No. 400518
1723 115/208-230V 60hz
single phase
With Switch and Wire Rope
■ Premium classic design and durability…
full metal cap and body
■ Better fuel economy…
because there’s less drag on your engine.
■ More miles from your front tires ... since they rotate
freely. Also allows you to steer more freely in turns.
■ More power and performance ... since front drivetrain
isn’t rotating; engine has reduced load.
■ More comfortable ride ... steering is lighter, and there is
less tendency to shimmy; drivetrain noise and vibration
are also reduced.
■ Better 4WD ... performance when the hubs are locked.
Works in reverse and compression braking. No slippage
or partial engagement/disengagement problems.
1723A 115/208-230V 50hz
single phase
With Switch and Wire Rope
Specifications:
Motor:1 hp Capacitor Start TEFC
Wire Rope: 1723 5/16"x100' (7.9mm x 30.5m)
• Power In and Power Out
• Automatic Mechanical Brake
• 11 FPM
• 15 Minutes “On Time”at Full Load
• Freespooling
AC2000
Windlass/Capstan
T1500 Specifications:
Motor:.45 hp
Wire Rope:5/32" x 25' (4mm x 7.62m)
ATV2000 Specifications:
Motor:.45 hp
Wire Rope:5/32" x 50' (4mm x 15.2m)
Corrosion Resistant
Painted and Polished
Aluminum
Finishes
2,000 lb. / 907 kg
T1500
1,500 lb. / 680 kg
1,950 lb. / 885 kg Stall
Premium 4WD Hubs For
Domestic and Import Vehicles
1,000 lb. / 454 kg
1,500 lb. / 680 kg Stall
12VDC With Winch Mounted Switch
Utility Winches
12VDC Winch Mounted Switch
and Hawse Fairlead
12VDC Winch Mounted S w i t c h ,
H awse Fairlead and Brake
12VDC Remote Handheld Switch,
Hawse Fairlead and Brake
12VDC Remote Handheld Switch,
Roller Fairlead and Brake
Specifications:
Motor:0.7 hp 12VDC
Wire Rope:3/16" x 50' (4.7mm x 15.2m)
• Power In and Power Out
• Freespooling
• Wire Rope Tensioning Plate
• Hawse Fairlead
† Integrated Prewired Solenoid System
with 12' Handheld Remote Switch
SAC1000
Specifications:
Motor:.6 hp 12VDC
Wire Rope:5/32" x 25' (4mm x 7.62m)
• Power In and Power Out
• Winch Mounted Switch
• Power Leads with Terminals
• Circuit Breaker
EX1
120V 50/60hz Without Freespooling
240V 50/60hz Without Freespooling
Specifications:
Motor:.5 hp
Wire Rope:3/16”x 50’ (4.7mm x 15.2m)
• Power In and Power Out
• Wire Rope Tensioning Plate
• Operates on House Current
• 6’ (1.82m) Pendant Switch
• Circuit Breaker
• Wire Rope Tensioning Plate
12VDC With Winch Mounted Switch
1,000 lb. / 454 kg
1,350 lb. / 612 kg Stall
2,500 lb. / 1134 kg
3,100 lb. / 1406 kg Stall
* Winches are not intended as a load securing device.
Winches are not intended for the transportation of people.
03532
Specifications:
Motor:1.3 hp 12VDC
Wire Rope:7/32" x 50' (5.6mm x 15.2m)
• Power In and Power Out
• Freespooling
• Wire Rope Tensioning Plate
• Hawse Fairlead
† Integrated Prewired Solenoid System
with 12' Handheld Remote Switch
* A 10% grade is a rise of one foot in ten feet.
* Winches are not intended as a load securing device.
EX1, T1500
ATV2000, X1, S2500
X2, X2F, S3500
X3, X3F, S3500
S4500
1101
Hawse Fairlead
†
12VDC With Winch Mounted Switch
and Freespooling
Specifications:
Motor:1.3 hp 12VDC
Wire Rope:3/16" x 25' (4.7mm x 7.62m)
• Power In and Power Out
• Winch Mounted Switch
• Power Leads with Terminals
• Circuit Breaker
03502 12VDC Winch Mounted Switch,
CAR TRAILERS/ROLLING WEIGHT
Model
12VDC With Roller Fairlead
03500 12VDC Winch Mounted Switch and
BOAT TRAILERS
6,000 lb. / 2722 kg
6,600 lb. / 2994 kg Stall
X1F
12VDC With Hawse Fairlead
3,500 lb. / 1588 kg
4,100 lb. / 1860 kg Stall
12VDC With Winch Mounted Switch
and Freespooling
Specifications:
Motor:1.3 hp 12VDC
1141 Wire Rope:3/16" x 25' (4.7mm x 7.62m)
1181 Wire Rope:3/16" x 50' (4.7mm x15.2m)
• Power In and Power Out
• Winch Mounted Switch
• Freespooling
• Wire Rope Tensioning Plate
• Power Leads with Terminals
• Circuit Breaker
Specifications:
Motor:1.6 hp 12VDC
Wire Rope:1/4" x 50' (6.4mm x 15.2m)
• Power In and Power Out
• Freespooling
• Wire Rope Tensioning Plate
• Hawse Fairlead
• Integrated Prewired Solenoid System
with 12' Handheld Remote Switch
12VDC Without Roller Fairlead
Winch selection guide for car and boat trailers
Grade*
30%
2,600
3,900
6,527
9,138
11,750
Premium Hubs
2,000 lb. / 907 kg
2,500 lb. / 1,134 kg Stall
Hawse Fairlead and Brake
Model
20%
EX1, T1500
3,400
ATV2000, X1, X1F 5,100
X2,X2F, S2500
8,503
X3, X3F, S3500 11,905
S4500
15,300
AC Winches
9,000 lb. / 4082 kg
11,900 lb. / 5398 kg Stall
1679
1680
Shown With Optional Roller Fairlead
9,000 lb. / 4082 kg
11,900 lb. / 5398 kg Stall
X Series
6,000 lb. / 2722 kg
6,600 lb. / 2994 kg Stall
Specifications:
Motor:2.1 hp 12VDC Series Wound
Wire Rope:5/16" x 150' (7.9mm x 45.6m)
• Power In and Power Out
• Freespooling
• Remote Mountable Solenoid Station
with 12' Handheld Remote Switch
X Series
X9
1917
S Series
1452
EC600 12VDC
600 lb. / 272 kg
1,000 lb. / 454 kg Stall
EC600
Specifications:
Motor:1.3 hp 12VDC
• Complete with Foot Switch
• Permanently Lubricated Gearbox
• Polyurethane Over Epoxy Finish
• For Anchor Handling on Boats to 40' (12m)
Winches are not intended for the transportation of people.
4 x 2 Conversion Kits
Convert "New Process"
203 full-time transfer case
to part time 4WD/2WD.
Part
900801
900802
1451 EW600 12VDC
900803
EW600
900805
Application
Conversion Kit only (hubs not included)
900801 plus Superhub set 400518, 1/2 ton hubs, Chevy/GMC truck,
Blazer/Jimmy, Ford F100/150, Bronco, F250 with 3,000 and 3,500 lbs.axle.
900801 plus Superhub set 400517, 3/4 ton hubs, Chevy/GMC 3/4 ton,
Ford F250 with 3,500 axle 1963 - 1977.
900801 plus Superhub set 400439, 1 ton hubs, Chevy/GMC K30 1ton '78 -present,
Ford F250/Crew Cab W/3800 axle, Ford F350 1 ton W/4500 axle..
Mounting Kits
NEW SuperMount System
®
Pulley Blocks, Roller Fairleads and
Off-Road Accessories
Replacement Switches
and Accessories
S
ATV Mount Kits
The World's Most Popular Electric Winch
Superwinch encourages you to
help preserve our national
forests and other public and
private lands by
“Treading Lightly”.
Mounts come complete with roller fairlead
ARCTIC CAT
P/N
Model
POLARIS
P/N
2350
2355
BEAR CAT 454 4X4, 1996-98
3 00 4X4, 1998
HONDA
P/N
Model
2351
2352
TRX400 FOREMAN 1995-98
TRX300 2X4 AND 4X4, 1993-98
2356
KAWASAKI
P/N
Model
2353
2354
2363
2364
2368
SUZUKI
P/N
2358
2357
KLF 300 BAYOU, 1988-95
*NO ROLLER FAIRLEAD
PRAIRIE, 1997-98
KLF 400 4X4, 1992-96
KLF 300 4X4, 1989-98
KLF 300 BAYOU, 1997-98
YAMAHA
P/N
2359
2360
Model
2361
LT 250, 1989-97
LT 4WD, 1987-97
LT KING QUAD, 1991-97
2362
2365
2366
2367
Model
YFM 250 TIMBERWOLF, 1992-97
TIMBERWOLF 4X4, 1994-97
YFM 350 FW BIG BEAR, 1987-96
YFM 350 2WD BIG BEAR, 1996-97
YFM 400 KODIAK, 1993-97
YFM 350 FW BIG BEAR SE, 1997
BIG BEAR 4X4, 1997
YFM 350 FX WOLVERINE, 1995-97
GRIZZLY 600 1998
BIG BEAR, 1997-98
Put up a good front.
Superwinch grill guards are rugged and resilient, they’ll
enhance the looks of your vehicle while expanding your
driving freedom. Superwinch grill guards for full size
vehicles accept all models including Husky. Our grill
guards create the reliable up-front answer to today’s
challenges of real off road.
Grill Guards
• Economical and easily fits most
pickups and 4WD vehicles
• Easy to install
• Fits over original equipment
bumper
• Accepts all Superwinch models
Jeep Mounting Kits
• Fits CJ, YJ and TJ models
• Incorporates original bumper,
mounting plate and hardware
• Low cost and easily installed
• Accepts most Superwinch models
2233 ATV Mountable Rocker
Switch Fits T1500 and
ATV2000 Only
"Tread Lightly" is an education
program designed to increase
public awareness of land-use
regulations and responsibilities
in our wilderness areas.
Model
TRAIL BOSS 250, 1994-95
300 2X4 AND 4X4, 1994-95
BIG BOSS 6X6 300, 1994
350L 2X4 AND 4X4, 1991-93
400L 2X4 AND 4X4, 1994
400L SPORTSMAN 4X4, 1994-97
425 MAGNUM 2X4 AND 4X4, 1995-98
425 MAGNUM 6X6, 1996-97
BIG BOSS 400L 6X6, 1996-97
300 XPLORER 4X4, 1996-98
400L XPLORER 4X4, 1995-98
SPORTSMAN 500 4X4, 1996-98
XPLORER 500 4X4, 1997
We make it easy. The system contains two receivers, a bracket kit, and
winch cradle. Simply place the cradle on top of the brackets, align two
holes, and pin. Now your winch is ready to roll.
When conditions call for rear winching, SuperMount quickly plugs into
any standard 2" Class III receiver hitch using a simple adapter. Such versatility isn’t just nice, it’s essential when front and rear mounting
options are the only thing between you and being stuck.
We make it strong. Where you’re headed, power counts. That’s why
SuperMount’s heavy duty custom winch mounting system has not one
but two receivers. These dual receivers are painstakingly crafted in the
USA to strict standards of quality in materials and performance. They’re
constructed of high strength steel and securely fastened with two corrosion resistant steel locking pins.
Mounted from the front of your vehicle, SuperMount securely handles
9,000 lbs. of pull for effective, twist-free action. Mounted from the rear,
the system will withstand pulls of up to 4,500 lbs. or maximum hitch
rating. Add a pulley block and double line back to your vehicle frame to
maximize your pulling capacity. Great for use on on pickups, trucks,
vans, RVs. and cars.
T
1515A Handheld Remote
Switch 12'and
Solenoid Kit
Fits EX1, X1, X2,
S2500, S3500
Distributed By:
1519 Replacement Switch
Fits EX1, X1, and X2
Series Winches
1520 Trailer Wiring Kit
Fits EX1, X1, X2, X3,
S2500,S3500 and S4500
Series Winches
V
S
T
2538
2541
U
V
1510
1578
Y
Accessory Kits
U
All Kits Contain the Following:
• Nylon Carry Bag
• Heavy Duty Leather Palmed Gloves
Bow Shackles (Pair)
Chain With Grab Hooks
Chain is 3/8" x 10'
Black Tow Hooks (Pair)
Chrome Tow Hooks (Pair)
The Following Also Contain:
Z
X
Kit 2224
• Heavy Duty Pulley Block
20,000 lbs. (2223)
• Nylon Sling (2531)
• 2 Bow Shackles (2538)
Kit 2514
• Pulley Block 20,000 lbs. (2220)
• Nylon Sling (1509)
Kit 1554
• Pulley Block 7,000 lbs. (2227)
• Nylon Sling (1509)
X
2227
Y
2229
Z
W
1795
2223
1591
W
1501
1501S
1551 Quick Connect
Permits quick and safe
connections for both
negative and positive
electric power cables
Three Position Heavy
Duty Rotary Switch Fits
EX1, X1, X2, S2500, S3500
1501 Dash Mount Kit
Fits EX1, X1, X2
1501S Dash Mount Kit
Fits S2500 and S3500
2220A
Pulley Block 7,000 lbs. For
EX1, X1, and S2500
Pulley Block 9,000 lbs.
For S4500
(not for Husky, X9, or S9000)
Swivel Pulley Block 4,000 lbs.
Heavy Duty Pulley Block
20,000 lbs. For X9, X9000
and Husky
Heavy Duty Pulley Block
with hook 20,000 lbs.
(not shown)
Recovery Straps, Tie Downs
1591
2516
2516
A
2522
1587
Part
2000
2001
2002
1586
Description
Winch Cradle
Rear Receiver Adapter
Receiver and Shackle Bracket
2539
1560
Roller Fairleads
2539 Fits X6CD, X9, S9000,
S6000, and Husky winches
1560 Fits EX1, X1, X2, and X3
®
Rear
Mount
Front
Mount
2010 to 2030
Bracket and
Receivers
2000
Winch Cradle
2539 Roller
Fairlead
2001 Rear
Receiver
Adapter
2000 Winch
Cradle
2002 Receiver and
Shackle Bracket
Roller Fairlead Cover
2543 Fits Roller Fairlead 2539
Superwinch, Inc.
Winch Drive
Putnam, Connecticut 06260 U.S.A.
Telephone: (860) 928-7787
FAX:
(860) 928-1143
e-mail: info@superwinch.com
www.superwinch.com/
Design, materials and specifications are subject to change
without notice. Superwinch Inc. is not responsible for printing
errors inadvertently made in the production of this catalog.
Product Guide 1998
00159D/90-12660 Rev F 12/97
Receiver Shackle Bracket
2546 Fits all standard
class III receiver hitches
Portable Winch Mounts
1559A Class IIReceiver
Hitch Mount
2525
A - Recovery Straps
2517
2"x20' 20,000 lbs.
2518
2"x30' 20,000 lbs.
2519
3"x30' 30,000 lbs.
2520
4"x30' 40,000 lbs.
2521
6"x30' 60,000 lbs.
Tree Trunk Savers (Not Shown)
1509
2"x6' 20,000 lbs.
2531
3"x8' 30,000 lbs.
2516
Emergency Tow Strap
1 3/4" x 15', 20,000 lbs
Tie Downs
2522 Race Car Tie Down
1586 Axle Straps
1587 Wheel Tie Downs
2525 Ratchet Tie Down
1" x 14' 1,800 lbs.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising