DV-40 DRILLING DRIVE

DV-40 DRILLING DRIVE
DV-40 DRILLING DRIVE
VARIABLE SPEED DRIVE UNIT | PN 610385
use Pengo's Excavator Augers
EXCAVATOR SIZE
MAX HOLE DEPTH
20'
MAX HOLE DIA.
7'
15T - 25T
CONNECTIONS
SQUARE
Removable
Top Section
Motor Equipped
with Quick
Coupler
130MM
WEIGHT
TRULINK TORQUE PIN
DV-40 is outfitted to fit these
TruLink® Torque Monitor Systems.
Powerful &
Efficient Motor
Kits include Pin, Displays, Anti-Rotation Block,
Mount, Cable, Stylus, and Flash USB Drive
LBS | 1500
Class 2 with 4" Display
PN | 615001
Class 2 with 8" Display
PN | 615003
Attached
Manual
Holder for
Quick Access
Highly Efficient
Gearbox designed for
long duty cycles
130MM Square
Output Shaft
HYDRAULIC MOTOR INFORMATION
Displacement
10.06 cu/in (165cc)
Motor Type
Variable Speed Bi-Directional
Motor Output Shaft
8/16" Spline 13T
Motor Mount
SAE - D 2 Bolt
Motor Ports
Radial (Quick Coupler)
Cross Over Pressure Relief
None
PLANETARY GEARBOX INFORMATION
Gearbox Type
Planetary Three Stage
Reduction Ratio
83.78:1
Output Shaft
130mm Square
Internal Oil Capacity
4.0 Gallons
Oil Type
SAE 80W90 GL-5
Shaft Pull Out (lbs.)
60,000 lbs.
www.pengoattachments.com
The DV-40 is the largest drilling drive in the Revolution
Series. This drive with turn Pengo Excavator augers
25' deep and as wide as 7' in diameter. Like the
DV-30 it is able to drill in most rock, dirt and frozen
ground drilling conditions.
800.599.0211
DV-40 DRILLING DRIVE
Variable Speed Models must have a drain line.
REFERENCE SPEED CHART
HIGH TORQUE/LOW SPEED OUTPUT
LOW TORQUE/HIGH SPEED OUTPUT
Flow GPM (Liter)
Low (rpm)
High (rpm)
40 (151)
9
23
45 (169)
10
25
50 (188)
12
28
55 (206)
13
31
60 (225)
14
34
REFERENCE TORQUE CHART (LT / HS)
Pressure
(psi)
00
3,1
Note
that both
THEORETICAL
Torque (ft/lb)
ACTUAL
Torque (ft/lb)
2000
9225
7841
2200
10148
8626
2400
11071
9410
2600
11993
10194
recommends
2800
12916
10979
to go by
3000
13838
11762
ACTUAL
3200
14761
12547
torque listings.
3400
15684
13331
3600
16606
14115
3800
17529
14900
4000
18451
15683
theoretical
and actual
torque values
are listed, but
that Pengo
REFERENCE TORQUE CHART (HT / LS)
Pressure
(psi)
THEORETICAL
Torque (ft/lb)
ACTUAL
Torque (ft/lb)
2000
22386
19028
2200
24625
20931
2400
26863
22834
2600
29102
24737
2800
31341
26640
3000
33579
28542
3200
35818
30445
3400
38057
32348
3600
40295
34251
3800
42534
36154
4000
44772
38056
MOUNTS for DV-40
End of Boom
(Stick)
Pengo offers a
complete excavator
mounting systems
for the DV-40 unit.
These mounts can be
mounted directly to the
boom or designed to
work with an existing
quick coupler.
Custom mounts can be
designed for specific
applications.
75MM Pin
LBS | 10
PN | 660554
LBS | 137
130MM SQ
Drive Tool
PN | 610202
LBS | 35
75MM Link Arm
PN | 610301
Quick
Coupler
Excavator Mounts allow for
maximum movment to ensure
4.
the Drive always hangs true to
the ground.
Pengo lists output speeds at both theoretical and actual. Actual torque numbers are NOT listed at 100% efficiency. Maximum efficiencies have been
applied to the torque and speed charts according to the manufacturer's recommendations. Speed and torque output are dependent on the overall
system efficiencies associated with the prime movers hydraulic system. When the purchaser is determining criteria for specific applications please
contact Pengo. Pengo has made every attempt to present accurate and suitable information published in this document. This document should be
used for information and comparative purposes only. When application-specific information is required, please contact Pengo.
www.pengoattachments.com
800.599.0211
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising