Alpine INA-W910R User Manual
FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN
AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ТОЛЬКО
ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE/ΓΙΑ ΧΡΗΣΗ ΜΟΝΟ ΣΕ ΑΥΤΟΚΙΝΗΤΟ
EN
R
ADVANCED NAVI STATION
DE
INA-W910R
FR
ES
IT
• OWNER’S MANUAL
Please read before using this equipment.
• ANVÄNDARHANDLEDNING
Innan du använder utrustningen bör du läsa
igenom denna användarhandledning.
• BEDIENUNGSANLEITUNG
Lesen Sie diese Bedienungsanleitung
bitte vor Gebrauch des Gerätes.
• GEBRUIKERSHANDLEIDING
Lees deze aanwijzingen aandachtig alvorens
dit toestel te gebruiken.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Прочтите настоящее руководство перед
началом использования оборудования.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
• INSTRUKCJA OBSŁUGI
Prosimy zapoznać się z tą instrukcją przed
przystąpieniem do użytkowania urządzenia.
• ISTRUZIONI PER L’USO
Si prega di leggere prima di utilizzare il
attrezzatura.
• ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΤΗ
Παρακαλούμε διαβάστε το πριν
χρησιμοποιήσετε τη συσκευή.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
1-888-NAV-HELP (1-888-628-4357)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
Designed by ALPINE Japan
68-16909Z49-A
SE
NL
RU
PL
GR
ENGLISH
Contents
Operating Instructions
PRECAUTIONS
IMPORTANT INFORMATION, PLEASE
READ CAREFULLY BEFORE USING
THIS PRODUCT. ......................................... 7
END USER LICENSE AGREEMENT
(Microsoft) .................................................... 7
END USER LICENSE AGREEMENT
(NAVTEQ) .................................................... 9
WARNING
Points to Observe for Safe Usage ................... 10
WARNING ............................................... 10
WARNING ............................................... 10
CAUTION ................................................ 11
PRECAUTIONS ...................................... 12
Discs Playable on This Unit ................. 13
Getting Started
Accessory List ................................................ 17
Location of Controls ...................................... 17
Turning Power On or Off ............................... 18
Inserting/Ejecting a Disc ................................ 18
Inserting/Removing the SD Memory Card .... 18
Adjusting the Monitor Viewing Angle ........... 18
Adjusting the Volume ..................................... 19
Lowering Volume Quickly ............................. 19
How to view the Display ................................ 19
TOUCH PANEL operation ......................... 19
Recalling the Source ................................... 19
Displaying the Numeric Keypad
Input Screen ............................................. 20
Radio
Listening to the Radio .................................... 20
Presetting Stations Manually .......................... 21
Presetting Stations Automatically .................. 21
Tuning to Preset Stations ................................ 21
RDS Operation
Turning AF (Alternative Frequencies)
On or Off .....................................................21
Receiving Traffic Information ........................22
PTY (Programme Type) Tuning .....................22
Receiving Traffic Information While Playing
CD or Radio .................................................22
Priority News ..................................................22
Displaying Radio Text ....................................22
CD/MP3/WMA/AAC
Playback ..........................................................23
Repeat Play .....................................................23
M.I.X. (Random Play) ....................................24
Selecting Folders
(concerning MP3/WMA/AAC) ...................24
About MP3/WMA/AAC .................................24
DVD/Video CD
Playing a Disc ................................................26
To display the DVD mode screen ...............26
If a menu screen appears .............................27
Displaying the Top Menu Screen ...............28
Displaying the Menu Screen ......................28
Displaying the Menu Operation
Mode Screen ...........................................28
Stopping Playback (Pre Stop) ........................28
Stopping Playback .........................................28
Fast-forwarding/Fast-reversing ......................29
Finding the Beginnings of
Chapters/Tracks/Files .................................29
Playing Still Frames (Pausing) .......................29
Forward/reverse frame-by-frame
Playback .....................................................29
Slow Motion Playback ...................................29
Selecting Folders ............................................29
Repeat Playback .............................................30
Searching by Title/Group/Folder Number .....30
Searching Directly by Chapter, Track or
File Number ................................................31
Switching the Angle .......................................31
Scroll to Move the Page Forward or
Backward ....................................................31
Switching the Audio Tracks ...........................31
3-EN
Switching the Subtitles
(Subtitle Language) .................................... 32
Switching from the disc menu ....................... 32
About DivX .................................................... 32
Other Useful Features
Adjusting the Audio ........................................ 33
Storing Settings in the Memory ...................... 36
Calling up the Preset Memory ........................ 36
Search Function .............................................. 36
Switching Display Modes ............................... 37
Setup
DVD Setup
DVD Setup Operation ..................................... 38
Changing the language setting .................... 38
Setting of the Menu Language .................... 38
Setting of the Audio Language ................... 39
Setting of the Subtitle Language ................. 39
Changing the Country Code Setting ........... 39
Setting the Rating Level
(Parental Lock) ........................................ 39
Changing the Digital Output Setting ........... 39
Setting the Downmix Mode ........................ 41
Setting the TV Screen ................................. 41
Setting of the Bonus Code .......................... 41
Setting the DVD-Audio
Playback Mode ....................................... 41
Playing MP3/WMA/AAC Data
(File Play Mode) ...................................... 41
Setting the compressed File
Playback Data .......................................... 42
Displaying DivX Disc Information ............ 42
Setting the Video CD Play Mode ................ 42
Source Setup
Source Setup Operation .................................. 42
Radio Setup ................................................. 43
USB Search ................................................. 43
4-EN
Display Setup
Display Setup Operation ................................ 44
Visual EQ Setting Operation ....................... 44
Setting the Brightness of the
Backlighting ............................................ 45
Adjusting the Minimum Level of
Backlight .................................................. 45
Setting the Function Guide display
ON/OFF ................................................... 45
Switching the Font Back Display
Colour ...................................................... 45
Adjusting the Touch Panel .......................... 45
Display On and Off ..................................... 45
General Setup
General Setup Operation ................................ 46
Displaying the Time .................................... 46
Demonstration Function ............................. 46
Sound (Beep) Guide Function .................... 46
Setting the Scroll ......................................... 46
Changing the Language Font ...................... 46
Adjusting the Dimmer of Button
Lighting at Night ..................................... 46
Setting Security code .................................. 47
System Setup
System Setup Operation ................................. 47
Switching the function of the remote
sensor ....................................................... 47
Setting the Camera Input ............................ 48
Setting the AUX Mode ............................... 48
Setting the Picture Output ........................... 49
Setting the BLUETOOTH Connection
(BLUETOOTH IN) ................................. 49
Setting the Digital Output ........................... 49
Setting Speed pulse type ............................. 49
Setting the Rear Entertainment System ...... 49
IMPRINT Operation (Optional)
Changing MultEQ mode ................................ 50
Adjusting Sound Setting in Manual Mode ..... 50
Setting the MX Level (Media Xpander) ..... 50
Adjusting the Crossover Settings
(X-Over) .................................................. 51
Adjusting the Time Correction ................... 52
Setting the Time Correction Unit
(T.Corr Parameter) ................................... 52
Graphic Equalizer Adjustments (G-EQ) ..... 52
Adjusting the Parametric Equalizer Curve
(P-EQ) ..................................................... 52
Equalizer Presets (F-EQ) ............................ 53
Setting the Response Slope for the High
Range Speaker (TW Setup) ..................... 53
Storing Settings in the Memory ..................... 53
Calling up the Preset Memory ........................ 53
About Time Correction .................................. 54
About the Crossover ....................................... 55
External Audio Processor Operation
(Optional)
Adjustment Procedure for Dolby
Surround ...................................................... 56
Setting the External Audio Processor ............ 56
Set MX Mode of the External Audio
Processor ................................................. 57
Setting Bass Sound Control ........................ 57
Using the Pro Logic II Mode ...................... 57
X-OVER Adjustment .................................. 58
Performing Time Correction Manually
(Time Correction) .................................... 58
Phase Switching .......................................... 59
Graphic Equalizer Adjustments .................. 59
Parametric Equalizer Adjustments .............. 59
Setting the Speakers .................................... 59
Setting of Dolby Digital .............................. 60
Speaker Setup ............................................. 60
Adjusting the DVD Level ........................... 61
Linear PCM Setting .................................... 61
Storing Settings in the Memory ..................... 61
Calling up the Preset Memory ........................ 61
BT Hands Free Calling
Setup Before Using .........................................61
About BLUETOOTH ..................................61
Before Using Hands-Free Function .............61
How to connect to a BLUETOOTH
compatible device (Pairing) .....................61
BLUETOOTH Setup .......................................62
BLUETOOTH Setup Operation ..................62
Hands-Free Phone Control ..............................64
About the Hands-Free Phone .......................64
Answering a Call ............................................64
Hanging up the Telephone ..............................64
Adjusting the volume when receiving
a Call ............................................................64
Redial Function ...............................................64
Call Switching Operation ................................64
Call History .....................................................65
Redialing a Number in Dialed Numbers
History ......................................................65
Dialing a Number in Received
Calls History ............................................65
Dialing a Number in Missed
Calls History ............................................65
Dialing a Number In the Phone Book
(Phone Book) ...........................................65
Voice Dial Operation ...................................66
Dialing a Number Using Direct
Dial Input .................................................66
Phone book alphabet search function .............66
Second incoming call function .......................67
Preset a number in the Phone Book
(Shortcut dial) ..............................................67
Dialing the preset number ...............................67
Camera Operation (Optional)
Front camera Operation ..................................68
Display the front view video manually ........68
Rear camera Operation ...................................68
Display the rear view video manually .........68
Display the rear view video while
the car is in reverse ...................................68
Adjusting Alarm Volume
(HCE-C300R only) ..................................69
Adjusting Detection Sensitivity
(HCE-C300R only) ..................................69
5-EN
SD Memory Video
Switching the SD Memory Video Screen ....... 70
Auxiliary Device (Optional)
Operating Auxiliary Devices (Optional) ........ 70
TUE-T200DVB Operation (Optional)
Operating the TUE-T200DVB (Optional) ...... 71
Changer (Optional)
Controlling CD Changer (Optional) ............... 71
Multi-Changer Selection (Optional) ............... 72
USB Memory/Portable audio player
(Optional)
BANK Function (Tag search mode only) ....... 72
Playback .......................................................... 73
Repeat Play ..................................................... 73
Random Play Shuffle (M.I.X.) ....................... 74
Searching for a desired Song .......................... 74
Searching by Tag information ..................... 74
Searching by artist name ............................. 74
Searching by Explorer (File Name) mode
(USB Memory only) ................................ 74
Alphabet Skip Function
(Tag search mode only) ............................... 75
Selecting Playlist/Artist/Album/Genre/Composer
(Tag search mode only) ............................... 75
Select the desired Folder
(Folder up/down) ......................................... 75
Creating the playlist from the Artist/Album
information of the current song
(Tag search mode only) ............................... 75
About MP3/WMA/AAC File of
USB Memory .............................................. 76
iPod/iPhone (Optional)
Connecting an iPod/iPhone ............................ 76
Setting the iPod Control ................................. 77
Playback .......................................................... 77
Searching for a desired Song .......................... 77
Searching by artist name ............................. 77
Direct Search Function ................................... 78
Alphabet Skip Function .................................. 78
Selecting Playlist/Artist/Album/Genre/
Composer/Episode/Category ....................... 79
Random Play Shuffle (M.I.X.) ....................... 79
Repeat Play ..................................................... 79
6-EN
Remote Control
Controls on Remote Control .......................... 80
When Using the Remote Control ................... 81
Battery Replacement ...................................... 82
Information
About DVDs ................................................... 82
Terminology ................................................... 83
List of Language Codes .................................. 84
List of Country Codes .................................... 85
In Case of Difficulty ....................................... 87
Specifications ................................................. 91
Installation and Connections
Warning .................................................. 93
Caution ................................................... 93
Precautions ........................................... 93
Installation ...................................................... 94
Calibration when connected to
HCE-C300R ................................................ 97
Connections .................................................... 98
System Example ........................................... 101
Operating Instructions
PRECAUTIONS
IMPORTANT INFORMATION, PLEASE
READ CAREFULLY BEFORE USING THIS
PRODUCT.
This product is intended to safely provide turn-by-turn
instructions to get you to a desired destination. Please read the
following precautions to ensure that you use this navigation
system correctly.
• This product is not a substitute for your personal judgment. Any
route suggestions made by this navigation system should never
supersede any local traffic regulations or your personal
judgment and/or knowledge of safe driving practices. Do not
follow route suggestions if the navigation system instructs you to
perform an unsafe or illegal manoeuvre, places you in an unsafe
situation, or routes you into an area which you consider unsafe.
• Glance at the screen only when necessary and safe to do so. If
prolonged viewing of the screen is necessary, stop in a safe and
legal manner and location.
• Do not input destinations, change settings, or access any
functions requiring a prolonged view of the monitor while you
are driving. Stop in a safe and legal manner and location before
attempting to access the system.
• When using the navigation system to find/route to an emergency
service, please contact the facility to validate and verify
availability, prior to driving to it. Not all locations of emergency
service providers such as police and fire stations, hospitals, and
clinics are contained in the database. Please use your own
judgment and your ability to ask for directions in these
situations.
• The map database contained within the media (SD memory card)
in which it is stored is the most recent map data available at the
time of production. Because of changes in streets and
neighborhoods, there may be situations where the navigation
system may not be able to route you to your desired destination.
In these cases, use your own personal judgment.
• The map database is designed to provide you with route
suggestions, it does not take account of the relative safety of a
suggested route, or of factors which may affect the time required
to reach your destination. The system does not reflect road
closures or construction, road characteristics (i.e. type of road
surface, slope or grade, weight or height restrictions, etc.),
traffic congestion, weather conditions, or any other factors
which may affect the safety or timing of your driving experience.
Use your personal judgment if the navigation system is unable to
provide you with an alternate route.
• There may be situations where the navigation system may
display the vehicle’s location erroneously. Use your own driving
judgment in this situation, taking into account current driving
conditions. Please be aware that in this situation, the navigation
system should correct the vehicle’s position automatically;
however, there may be times where you may have to correct the
position yourself. If this is the case, stop in a safe and legal
manner and location before attempting operation.
• Make certain that the volume level of the unit is set to a level
which still allows you to hear outside traffic and emergency
vehicles. Driving while unable to hear outside sounds could
cause an accident.
• Please make certain that any other person who intends on using
this navigation system reads these precautions and the following
instructions carefully.
If there is anything in the manual about the operation of
the navigation system which you are uncertain about,
please contact your local Alpine authorized navigation
dealer before using the navigation system.
END USER LICENSE AGREEMENT
(Microsoft)
You have acquired a device (“DEVICE”) that includes software
licensed by Alpine Electronics, Inc. (collectively “ALPINE”) from
an affiliate of Microsoft Corporation (collectively “MS”). Those
installed software products of MS origin, as well as associated
media, printed materials, and “online” or electronic
documentation (“SOFTWARE”) are protected by international
intellectual property laws and treaties. The SOFTWARE is
licensed, not sold. All rights reserved.
IF YOU DO NOT AGREE TO THIS END USER LICENSE
AGREEMENT (“EULA”), DO NOT USE THE DEVICE OR COPY
THE SOFTWARE INSTEAD, PROMPTLY CONTACT ALPINE FOR
INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR
A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT
NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE
YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY
PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE,
This EULA grants you the following license: You may use the
SOFTWARE only on the DEVICE.
NOT FAULT TOLERANT.
THE SOFTWARE IS NOT FAULT TOLERANT. ALPINE HAS
INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE
IN THE DEVEICE, AND MS HAS RELIED UPON ALPINE TO
CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE
SOFTWARE IS SUITALE FOR SUCH USE.
NO WARRANTIES FOR THE SOFTWARE,
THE SOFTWARE is provided “AS IS“ and with all faults. THE
ENTIRE RISK AS TO SATISFACTORY QUALITY,
PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING
LACK OF NEGALIGENCE) IS WITH YOU. ALSO, THERE IS NO
WARRANTY AGAINST INTERFERENCE WTH YOUR
ENJOYMENT OF THE SOFTWARE OR AGAINST
INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES
REGARDING THE DEVICE OR SOFTWARE THOSE
WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT
BINDING ON, MS.
7-EN
NO LIABILITY FOR CERTAIN DAMAGES.
INTELLECTUAL PROPERTY RIGHTS.
EXCEPTAS PROHIBITED BY LAW, MS SHALL HAVE NO
LIAVILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR
THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY
REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT
SHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S.
TWO HUNDRED FIFTY DOLLARS (U.S. $250.00).
All title and intellectual property rights in and to the SOFTWARE
(including but not limited to any images, photographs,
animations, video, audio, music, text and “applets,”
incorporated into the SOFTWARE), the accompanying printed
materials, and any copies of the SOFTWARE, are owned by MS,
Microsoft Corporation, their affiliates or suppliers. The
SOFTWARE is licensed, not sold.
You may not copy the printed materials accompanying the
SOFTWARE. All title and intellectual property rights in and to the
content which may be accessed through use of the SOFTWARE
is the property of the respective content owner and may be
protected by applicable copyright or other intellectual property
laws and treaties. This EULA grants you no rights to use such
content. All rights not specifically granted under this EULA are
reserved by MS, Microsoft Corporation, their affiliates and
suppliers. Use of any on-line services which may be accessed
through the SOFTWARE may be governed by the respective
terms of use relating to such services. If this SOFTWARE
contains documentation that is provided only in electronic form,
you may print one copy of such electronic documentation.
LIMITATIONS ON REVERSE ENGINEERING,
DECOMPILATION, AND DISASSEMBLY
You may not reverse engineer, decompile, or disassemble the
SOFTWARE, except and only to the extent that such activity is
expressly permitted by applicable law notwithstanding this
limitation.
ADDITIONAL SOFTWARE/SERVICES.
The SOFTWARE may permit ALPINE, MS, Microsoft Corporation
or their affiliates to provide or make available to you SOFTWARE
updates, supplements, add-on components, or Internet – base
service components of the SOFTWARE after the date you obtain
your initial copy of the SOFTWARE (“Supplemental
Components”).
• If ALPINE provides or makes available to you
Supplemental Components and no other EULA terms are
provided along with the Supplemental Components, then
the terms of this EULA shall apply.
• If MS, Microsoft Corporation or their affiliates make
available Supplemental Components, and no other EULA
terms are provided, then the terms of this EULA shall
apply, except that MS, Microsoft Corporation or affiliate
entity providing the Supplemental Component(s) shall be
licensor of the Supplemental Component(s).
• ALPINE, MS, Microsoft Corporation and their affiliates
reserve the right to discontinue any Internet-based
services provided to you or made available to you through
the use of the SOFTWARE.
RECOVERY MEDIA.
If SOFTWARE is provided by ALPINE on separate media and
labelled “Recovery Media” you may use the Recovery Media
solely to restore or reinstall the SOFTWARE originally installed on
the DEVICE.
UPGRADES.
If the SOFTWARE is provided by ALPINE separate from the
DEVICE on separate media or via web download or other
means, and is labelled “For Upgrade Purposes Only” you may
install one (1) copy of such SOFTWARE onto the DEVICE as a
replacement copy for the existing SOFTWARE, and use it in
accordance with this EULA, including any additional EULA terms
accompanying the upgrade SOFTWARE.
TERMINATION.
Without prejudice to any other rights, ALPINE or MS may
terminate this EULA if you fail to comply with the terms and
conditions of this EULA. In such event, you must destroy all
copies of the SOFTWARE and all of its component parts.
8-EN
TRADEMARKS.
This EULA does not grant you any rights in connection with any
trademarks or service marks of ALPINE, MS, Microsoft
Corporation, their affiliates or suppliers.
PRODUCT SUPPORT.
Product support for the SOFTWARE is not provided by MS, its
parent corporation Microsoft Corporation, or their affiliates or
subsidiaries. For product support, please refer to ALPINE
support number provided in the documentation for the DEVICE.
Should you have any questions concerning this EULA, or if you
desire to contact ALPINE for any other reason, please refer to
the address provided in the documentation for the DEVICE.
SOFTWARE TRANSFER ALLOWED BUT WITH
RESTRICTIONS.
You may permanently transfer rights under this EULA only as
part of a permanent sale or transfer of the Device, and only if the
recipient agrees to this EULA. If the SOFTWARE is an upgrade,
any transfer must also include all prior versions of the
SOFTWARE.
EXPORT RESTRICTION.
You acknowledge that SOFTWARE is of US-origin. You agree to
comply with all applicable international and national laws that
apply to the SOFTWARE, including the U.S. Export
Administration Regulations, as well as end-user, end-use and
country destination restrictions issued by U.S. and other
governments. For additional information on exporting the
SOFTWARE, see http://www.microsoft.com/exporting/
END USER LICENSE AGREEMENT
(NAVTEQ)
PLEASE READ THIS END USER LICENSE AGREEMENT
CAREFUL BEFORE USING THE NAVTEQ DATABASE
NOTICE TO THE USER
THIS IS A LICENSE AGREEMENT - AND NOT AN AGREEMENT
FOR SALE - BETWEEN YOU AND NAVTEQ B.V. FOR YOUR
COPY OF THE NAVTEQ NAVIGABLE MAP DATABASE,
INCLUDING ASSOCIATED COMPUTER SOFTWARE, MEDIA
AND EXPLANATORY PRINTED DOCUMENTATION PUBLISHED
BY NAVTEQ (JOINTLY ”THE DATABASE”). BY USING THE
DATABASE, YOU ACCEPT AND AGREE TO ALL TERMS AND
CONDITIONS OF THIS END USER LICENSE AGREEMENT
(“AGREEMENT”). IF YOU DO NOT AGREE TO THE TERMS OF
THIS AGREEMENT, PROMPTLY RETURN THE DATABASE,
ALONG WITH ALL OTHER ACCOMPANYING ITEMS, TO YOUR
SUPPLIER FOR A REFUND.
OWNERSHIP
The Database and the copyrights and intellectual property or
neighboring rights therein are owned by NAVTEQ or its
licensors. Ownership of the media on which the Database is
contained is retained by NAVTEQ and/or your supplier until after
you have paid in full any amounts due to NAVTEQ and/or your
supplier pursuant to this Agreement or similar agreement(s)
under which goods are provided to you.
LICENSE GRANT
NAVTEQ grants you a non-exclusive license to use the Database
for your personal use or, if applicable, for use in your business’
internal operations. This license does not include the right to
grant sub-licenses.
LIMITATIONS ON USE
The Database is restricted for use in the specific system for
which it was created. Except to the extent explicitly permitted by
mandatory laws (e.g. national laws based on the European
Software Directive (91/250) and the Database Directive (96/9)),
you may not extract or reutilize substantial parts of the contents
of the Database nor reproduce, copy, modify, adapt, translate,
disassemble, decompile, reverse engineer any portion of the
Database. If you wish to obtain interoperability information as
meant in (the national laws based on) the European Software
Directive, you shall grant NAVTEQ reasonable opportunity to
provide said information on reasonable terms, including costs, to
be determined by NAVTEQ.
TRANSFER OF LICENSE
You may not transfer the Database to third parties, except when
installed in the system for which it was created or when you do
not retain any copy of the Database, and provided that the
transferee agrees to all terms and conditions of this Agreement
and confirms this in writing to NAVTEQ. Multi-disc sets may only
be transferred or sold as a complete set as provided by NAVTEQ
and not as subset thereof.
LIMITED WARRANTY
NAVTEQ warrants that, subject to the warnings set out below, for
a period of 12 months after acquisition of your copy of the
Database, it will perform substantially in accordance with
NAVTEQ’s Criteria for Accuracy and Completeness existing on
the date you acquired the Database; these criteria are available
from NAVTEQ at your request. If the Database does not perform
in accordance with this limited warranty, NAVTEQ will use
reasonable efforts to repair or replace your non-conforming copy
of the Database. If these efforts do not lead to performance of
the Database in accordance with the warranties set out herein,
you will have the option to either receive a reasonable refund of
the price you paid for the Database or to rescind this Agreement.
This shall be NAVTEQ’s entire liability and your sole remedy
against NAVTEQ. Except as expressly provided in this section,
NAVTEQ does not warrant nor make any representations
regarding the use of results of the use of the Database in terms
of its correctness, accuracy, reliability, or otherwise. NAVTEQ
does not warrant that the Database is or will be error free. No
oral or written information or advice provided by NAVTEQ, your
supplier or any other person shall create a warranty or in any
way increase the scope of the limited warranty described above.
The limited warranty set forth in this Agreement does not affect
or prejudice any statutory legal rights that you may have under
the legal warranty against hidden defects.
If you did not acquire the Database from NAVTEQ directly, you
may have statutory rights against the person from whom you
have acquired the Database in addition to the rights granted by
NAVTEQ hereunder according to the law of your jurisdiction. The
above warranty of NAVTEQ shall not affect such statutory rights
and you may assert such rights in addition to the warranty rights
granted herein.
LIMITATION OF LIABILITY
The price of the Database does not include any consideration for
assumption of risk of consequential, indirect or unlimited direct
damages which may arise in connection with your use of the
Database. Accordingly, in no event shall NAVTEQ be liable for
any consequential or indirect damages, including without
limitation, loss of revenue, data, or use, incurred by you or any
third party arising out of your use of the Database, whether in an
action in contract or tort or based on a warranty, even if NAVTEQ
has been advised of the possibility of such damages. In any
event NAVTEQ’s liability for direct damages is limited to the price
of your copy of the Database.
THE LIMITED WARRANTY AND LIMITATION OF LIABILITY, SET
FORTH IN THIS AGREEMENT, DO NOT AFFECT OR
PREJUDICE YOUR STATUTORY RIGHTS WHERE YOU HAVE
ACQUIRED THE DATABASE OTHERWISE THAN IN THE
COURSE OF A BUSINESS.
WARNINGS
The Database may contain inaccurate or incomplete information
due to the passage of time, changing circumstances, sources
used and the nature of collecting comprehensive geographic
data, any of which may lead to incorrect results. The Database
does not include or reflect information on - inter alia neighborhood safety; law enforcement; emergency assistance;
construction work; road or lane closures; vehicle or speed
restrictions; road slope or grade; bridge height, weight or other
limits; road or traffic conditions; special events; traffic
congestion; or travel time.
9-EN
GOVERNING LAW
This Agreement shall be governed by the laws of the jurisdiction,
in which you reside at the date of acquisition of the Database.
Should you at that moment reside outside the European Union or
Switzerland, the law of the jurisdiction within the European Union
or Switzerland where you acquired the Database shall apply. In
all other cases, or if the jurisdiction where you acquired the
Database cannot be defined, the laws of the Netherlands shall
apply. The courts competent at your place of residence at the
time you acquired the Database shall have jurisdiction over any
dispute arising out of, or relating to this Agreement, without
prejudice to NAVTEQ’s right to bring claims at your then current
place of residence.
WARNING
Points to Observe for Safe Usage
• Read this manual carefully before using this disc and the system
components. They contain instructions on how to use this
product in a safe and effective manner. Alpine cannot be
responsible for problems resulting from failure to observe the
instructions in this manual.
• This manual uses various pictorial displays to show you how to
use this product safely and to alert you to potential dangers
resulting from improper connections and operation. Following
are the meanings of these pictorial displays. It is important to
fully understand the meanings of these pictorial displays in order
to use this manual and the system properly.
WARNING
• Operation of the system while driving is dangerous. Users
should stop vehicle before operating the software.
• Road conditions and regulations take precedence over
information contained on the map display: observe actual
traffic restrictions and circumstances while driving.
• This software is designed for use exclusively in the
INA-W910R. It cannot and may not be used in conjunction
with other hardware.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER
CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS
STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous for the driver to watch TV/Video while driving a
vehicle. Installing this product incorrectly enables the driver to
watch TV/Video while driving. This may cause a distraction,
preventing the driver from looking ahead, thus causing an accident.
The driver or other people could be severely injured.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
10-EN
DO NOT FOLLOW ROUTE SUGGESTIONS IF THE
NAVIGATION SYSTEM INSTRUCTS YOU TO PERFORM AN
UNSAFE OR ILLEGAL MANEUVER, OR PLACES YOU IN AN
UNSAFE SITUATION OR AREA.
This product is not a substitute for your personal judgment. Any
route suggestions by this system should never supersede any local
traffic regulations or your personal judgment or knowledge of safe
driving practice.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Centre for repairing.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT
PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the
product.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
11-EN
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +45°C
(+113°F) and 0°C (+32°F) before turning your unit on.
New Discs
To prevent the CD from jamming, “Disc Error” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the centre hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
Centre Hole
Centre Hole
New Disc
Moisture Condensation
You may notice the disc playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
Outside
(Bumps)
Bumps
Damaged Disc
Installation Location
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Make sure the INA-W910R will not be installed in a location
subjected to:
Maintenance
•
•
•
•
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“Disc Error” will be displayed on your player if you insert a disc
incorrectly. If “Disc Error” continues to be displayed even though
the disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Irregular Shaped Discs
Be sure to use round shaped discs only for this unit and never use
any special shaped discs.
Use of special shaped discs may cause damage to the mechanism.
12-EN
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the
DVD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the centre of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
Discs Playable on This Unit
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
DVD players.
Playable discs
The discs listed below can be played on this unit.
Mark (logo)
Recorded content
Disc size
Audio
+
Video
12 cm*
Audio
+
Video
12 cm*
DVD Video
Transparent Sheet
Disc Stabilizer
• After turning the system off, a slight ghost of the image will
remain temporarily. This is an effect peculiar to LCD technology
and is normal.
• In cold temperature conditions, the screen may lose contrast
temporarily. After a short warm-up period, it will return to
normal.
DVD Audio
8 cm
8 cm
12 cm
Audio
+
Video
Video CD
8 cm
Alpine products equipped with the Ai-NET bus, connected to the
INA-W910R, can be operated from the INA-W910R. Depending
on the products connected, the functions and displays will vary. For
details, consult your Alpine dealer.
Operation of some of the functions of this unit is very complex.
Because of this, it was deemed necessary to place these functions
into a special screen. This will restrict operation of these functions
to times when the vehicle is parked. This ensures the focus of the
driver’s attention will be on the road and not on the INA-W910R.
This has been done for the safety of the driver and passengers.
Audio Processor Adjustments cannot be made if the car is moving.
The car must be parked and the parking brake must be engaged for
the procedure described in the Owner’s Manual to be valid. The
warning “Can’t operate while driving”, will be displayed if any
attempts are made to perform these operations while driving.
• The INA-W910R draws minimal current even when its power
switch is turned off. If the switched power (ignition) lead of the
INA-W910R is connected directly to the positive (+) post of the
vehicle’s battery, the battery may be discharged.
An SPST (Single-Pole, Single-Throw) switch (sold separately)
can be added to simplify this procedure. Then, you can simply
place it in the OFF position when you leave the vehicle. Turn the
SPST switch back ON before using the INA-W910R. For
connecting the SPST switch, refer to the “Connection Diagram
of SPST Switch (Sold Separately)” (page 96). If the power
(ignition) lead is unswitched, it must be disconnected from the
battery post should the vehicle be left unused for an extended
period of time.
12 cm
Music CD
Audio
8 cm
(CD single)
Audio
+
Video
DivX®
12cm
8 cm
* Two-layer DVD disc compatible
The formatted discs listed below can be played on this unit.
CD-R/
CD-RW
DVD-R/
DVD-RW
DVD+R/
DVD+RW
CD Format
MP3 Format (“mp3”)
WMA Format
(“wma”)
AAC Format
(“aac”, “m4a”)
DVD Video Format
DivX Format
(“avi”, “divx”)
Video CD Format
Discs that are not finalised cannot be played back
13-EN
Discs that cannot be played
Tips for making your own CDs
DVD-ROMs, DVD-RAMs, CD-ROMs (excluding MP3/WMA/
AAC files), photo CDs, etc.
The INA-W910R plays DVD Video, DVD Audio, Video CD,
Audio CD, DivX® and has a built in MP3/WMA/AAC decoder.
DualDisc
This unit is not compatible with DualDisc.
Using a DualDisc may cause unit malfunction, and may cause disc
damage when the disc is inserted/ejected.
DVD region number (playable region number)
This DVD player will play back any disc whose region number is 2
(or All). DVDs with a region number other than those listed below,
cannot be played on this DVD player.
2
ALL
Video CDs
This DVD head unit is compatible with playback control (PBC)
compatible Video CDs (version 2.0).
“PBC” is a function by which you can use menu screens recorded
on the disc to find the scene you want to watch and view various
types of information in dialogue style.
Using compact discs (CD/CD-R/CD-RW)
If you use non-standard compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordable)/CD-RWs (CD-ReWritable)
which have been recorded only on audio devices. You can also play
CD-Rs/CD-RWs containing MP3/WMA/AAC formatted audio
files.
• Some of the following discs may not play on this unit:
Flawed discs, discs with fingerprints, discs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), discs
recorded under unstable conditions, discs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
• Use discs with compressed audio files written in a format
compliant with this unit. For details, see pages 24 and 25.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalised).
• Finalise the CD-R/CD-RW if necessary, and attempt playback
again.
14-EN
The following information is designed to help you create your own
music CDs (either Audio CD or MP3/WMA/AAC encoded CD-R/
RW files).
What is the difference between an Audio and MP3/WMA/AAC
CD?
An Audio CD is the same format as the commercial CDs you buy
in the store (also known as CD-DA). MP3 (MPEG-1 Audio Layer
3)/WMA (Windows Media Audio)/AAC (Advanced Audio
Coding) is a data file that uses a compression scheme to reduce the
size of the music file.*
Hybrid Audio CD and Data (MP3/WMA/AAC) CD-R/RW
discs:
The INA-W910R can read either sector on the disc. Choose
CD-DA to play the CD audio section or MP3/WMA/AAC to play
the MP3/WMA/AAC section.*
Multi-session CD-R/RW:
Once a recording has been stopped, this is considered one session.
If the disc is not closed (finalised), additional data may be added.
Once this additional data has been recorded, this becomes a “multisession” CD. The INA-W910R can only read multi-session DATA
Formatted discs (MP3/WMA/AAC files - Not Audio CD files).
Properly formatted MP3/WMA/AAC Discs:
Use ISO9660 formatting to insure proper playback. You may use
standard ISO naming Level 1 (8.3 DOS standard), Level 2 (32
characters) or Joliet (Windows or Macintosh long filenames) file
naming conventions.*
*Please consult the Owner’s manual for additional information.
On handling compact discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that the disc is smooth and flat.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time.
Never expose the disc to direct sunlight.
Heat and humidity may damage the disc and you may not be
able to play it again.
Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs
• This unit is compatible with discs recorded in the standard DVDVideo formats.
• Note that discs not finalised (processed to enable to play on
playback-only DVD players) cannot be played on this DVD
player.
• Some discs may not play back, depending on the recording
device and disc format.
• Discs or files utilizing copy protection, may not be playable.
Some recording systems may not properly format copied files to
enable proper playback.
• In the following cases, the disc may not play on this unit:
discs recorded by certain DVD recorders, certain irregular discs,
flawed discs, dirty discs, when the pickup lens of this DVD
player is dirty, or when moisture condensation has occurred
inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs discs.
• Do not put stickers, seals, or tape on the label side of DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs/DVD+Rs/
DVD+RWs are more affected by heat, moisture, and direct
sunlight. If left in a car, etc., damage may occur and it might not
play on this unit.
• The operable temperature range for disc playback is as follows:
DVD-R/DVD-RW: -25 ~ +70°C
DVD+R/DVD+RW: +5 ~ +55°C
Disc terminology
Title
If titles are programmed for the DVD, these are the largest units of
division of the information recorded on the disc.
Chapter
Each Title may also be divided into smaller divisions, called
chapters. These can be specific scenes or musical selections.
Protecting the USB connector
• Only an iPod/iPhone, USB memory or Portable audio player can
be connected to the USB connector on this unit. Correct
performance using other USB products cannot be guaranteed.
• If the USB connector is used, be sure to use only the supplied
connector cable with the unit. A USB hub is not supported.
• Depending on the connected USB memory device, the unit may
not function or some functions may not be performed.
• The audio file format that can be played back on the unit is
MP3/WMA/AAC.
• Artist/song name, etc., can be displayed, however characters
may not be correctly displayed.
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data, etc.,
is lost while using this product.
On Handling USB Memory
• This unit can control a memory storage device that supports the
USB Mass Storage Class (MSC) protocol. Playable audio file
formats are MP3, WMA and AAC.
• USB memory function is not guaranteed. Use USB memory
according to the terms of agreement. Read the USB memory
Owner’s Manual thoroughly.
• Fix the USB memory in a location where driver operation will
not be hindered.
• USB memory may not function correctly at high or low
temperature.
• Use only certified USB memory. Note that even certified USB
memory, may not function correctly depending on its type or
state.
• Depending on the settings of the USB memory type, memory
state or encoding software, the unit may not play back or display
properly.
• Files protected by DRM (Digital Rights Management), cannot be
played back on this unit. These include AAC formatted files
purchased from the iTunes Store and WMA or other files with
some form of copyright protection.
• USB memory may take time to start playback. If there is a
particular file other than audio in the USB memory, it may take
considerable time before the file is played back or searched.
• The unit can play back “mp3”, “wma” or “m4a” file extensions.
• Do not add the above extensions to a file other than audio data.
This non-audio data will not be recognised. The resulting
playback may contain noise that can damage speakers and/or
amplifiers.
• It is recommended to back up important data on a personal
computer.
• Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, then remove the
USB device to prevent possible damage to its memory.
15-EN
On Handling Portable audio player
• The unit can control a Portable audio player with the USB
interface. Playable audio file formats are MP3 and WMA.
• Portable audio player function is not guaranteed. Use Portable
audio player according to the terms of agreement. Read the
Portable audio player Owner’s Manual thoroughly.
• Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high
temperatures.
Anywhere the possibility of high humidity or corrosive
substances are present.
• Fix the Portable audio player in a location where driver operation
will not be hindered.
• Portable audio player may not function correctly at high or low
temperature.
• Depending on the settings of the Portable audio player type,
memory state or encoding software, the unit may not play back
or display properly.
• If the Portable audio player has an MSC/MTP setting, set to
MTP.
• A Portable audio player in which data is stored by USB Mass
Storage may not be playable on the unit.
• Depending on the Portable audio player settings, USB Mass
Storage may be supported. For setting, refer to the Owner’s
Manual of the player.
• The unit can play back MP3/WMA files synchronised by
Windows Media Player (Ver. 10 or 11), and are then forwarded
to the player. The “mp3” or “wma” extensions are playable.
• If data is not synchronised by Windows Media Player and is
forwarded in another way, the unit may not be able to correctly
play back the files.
• WMDRM10 is supported by the unit.
• A file that is copy-protected (copyright protection) cannot be
played back.
• It is recommended to back up important data on a personal
computer.
• Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, then remove the
USB device to prevent possible damage to its memory.
• When Nokia is used as a Portable audio player:
Not all the Nokia mobile phones can be used as Portable audio
players. If the Nokia phone fails to work as a Portable audio
player while connected, set it to Mass Storage mode and
reconnect to this unit. For details, refer to Owner’s Manual of the
Nokia phone.
On Handling SD memory card
• During the navigation system update, please use the SD memory
card that only contains the data for update. Otherwise, the
display may be abnormal. In this case, please consult your
ALPINE dealer. For the operation on update, refer to ALPINE
website.
16-EN
• This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• Manufactured under license under U.S. Patent #’s: 5,451,942;
5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and the Symbol are
registered trademarks, & DTS 2.0+ Digital Out and the DTS
logos are trademarks of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
• Windows Media, and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other
countries.
• “Made for iPod,” and “Made for iPhone,” mean that an
electronic accessory has been designed to connect specifically to
iPod, or iPhone, respectively, and has been certified by the
developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance
with safety and regulatory standards.
• The BLUETOOTH® word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use of
such marks by Alpine Electronics, Inc. is under license.
• “MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson”
• “Supply of this product only conveys a license for private,noncommercial use and does not convey a license nor imply any
right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
For details, please visit http://www.mp3licensing.com”
• Audyssey MultEQ XT is a registered trademark of Audyssey
Laboratories Inc.
• DivX®, DivX Certified® and associated logos are trademarks of
DivX, Inc. and are used under license.
• “SD Logo is a trademark of SD-3C, LLC.”
• © 2010 Nokia. All rights reserved. Nokia and Works with Nokia
are trademarks or registered trademarks of Nokia Corporation.
©1993-2010 NAVTEQ. All rights reserved.
Portions ©2010, Microsoft Corporation. All Rights Reserved.
Getting Started
Location of Controls
button
Accessory List
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Head unit .............................................................................1
Power Cable ........................................................................1
Mounting Sleeve ..................................................................1
Bracket key..........................................................................2
Flush Head Screw (M5x8) ...................................................6
Screw (M5×8) ......................................................................8
Face plate............................................................................1
Mounting Position Seal ........................................................2
GPS Antenna .......................................................................1
Pre OUT Cable ....................................................................1
AUX I/O Cable .....................................................................1
AV extension cable ..............................................................1
Rubber Cap .........................................................................1
Hex Bolt ...............................................................................1
USB extension cable ..........................................................1
USB 30P cable ....................................................................1
Microphone..........................................................................1
Remote Control ....................................................................1
Battery (CR2025) .................................................................1
Owner’s Manual .............................................................1 set
Recalls the Eject/Tilt screen.
If the disc does not eject after touching [Eject] of Disc,
for at least 3 seconds.
press and hold
/
button
Press to adjust the volume.
MUTE/PHONE button
Lowers the volume by 20 dB instantly. Press the button
again to cancel.
Press and hold for at least 2 seconds to display the
Telephone Menu screen.
(Displayed only when BLUETOOTH IN is set to ON
(page 49)).
SOURCE/
button
Turns the power on. Press and hold for at least 3 seconds to
turn the power off.
Recalls the Source selection screen.
AUDIO
/TA button
Return to the AV main source screen that is displayed
before the Setup, Navigation, Telephone, Camera mode,
etc. is started.
Turn on GUIDEVIEW WINDOW™ mode when the current
screen is audio source screen (Radio, CD, iPod, etc.). Press
again to turn it off. For more information, refer to the Owner’s
Manual of navigation system stored in the supplied
CD-ROM.
Press this button for at least 2 seconds to turn the T.INFO
mode ON or OFF.
MAP button
Recall the navigation map screen.
For more information, refer to the Owner’s Manual of
navigation system stored in the supplied CD-ROM.
NAVI MENU button
Recall the navigation menu screen.
For more information, refer to the Owner’s Manual of
navigation system stored in the supplied CD-ROM.
RESET switch
Connect to Remote Control Interface Box
You can operate this unit from the vehicle’s control unit when
an Alpine Remote Control Interface Box (optional) is
connected. For details, contact your Alpine dealer.
Be sure to press the RESET switch when using the unit for
the first time, after installing the CD changer, after changing
the car battery, etc.
Turn off the unit power, press RESET with a ballpoint pen or
similar pointed object.
Remote Sensor
Point the supplied remote control transmitter towards the
remote sensor within a range of 2 meters.
• The buttons on the face of this unit are shown in bold
(e.g. SOURCE/ ). The onscreen buttons that appear in the
display are shown in bold enclosed by [ ] (e.g.[BAND]).
17-EN
Turning Power On or Off
Inserting/Removing the SD Memory Card
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
Video data recorded in the SD memory card can be played back by the
player built in this unit. To insert and take out the SD memory card,
follow the instructions below.
1
Press SOURCE/
to turn on the unit.
• You can update the software and map of navigation system by using
an optional SD memory card.
• The unit can be turned on by pressing any button.
2
Press and hold SOURCE/
turn off the unit.
for at least 3 seconds to
1
After opening the movable monitor, open the cover
of SD memory card slot.
Inserting/Ejecting a Disc
1
Press
on the unit.
The display changes to the Eject/Tilt screen.
2
Insert a disc:
Touch [Open] on the Eject/Tilt screen.
The movable monitor will open, then insert a disc into the
disc slot. Inserting a disc will close the monitor
automatically.
Insert the SD memory card
2
Insert your SD memory card until it clicks.
Disc Slot
Remove the SD memory card
Eject the disc:
Touch [Eject] of Disc on the Eject/Tilt screen.
The movable monitor will open. Then the disc is ejected.
After remove the disc, touch [Close] to close the movable
monitor.
• Touching [Exit] returns to the earlier main source screen.
• Do not apply shock to the movable monitor when it is open as it may
result in malfunction of the unit.
• The monitor may be dim during low temperature and immediately
after turning on the power. The brightness will return to normal as
time elapses.
• The monitor will stop at the set tilt angle when closing.
CAUTION
Keep hands (or any other object) away from the monitor while it
is opening or closing to avoid damage or injury. The back of the
movable monitor will get very warm under normal operating
conditions. This is not a malfunction. Do not touch.
2
Push the SD memory card that is inserted.
The SD memory card is pulled out.
3
4
Close the cover of SD memory card slot.
Close the movable monitor.
Adjusting the Monitor Viewing Angle
Adjust the monitor’s angle for better visibility.
1
Press
on the unit.
The display changes to the Eject/Tilt screen.
2
Touch [ ] or [ ] of Tilt to adjust the desired
monitor angle.
The monitor angle can be adjusted in 5 stages.
3
Touch [Exit] to return to the previous screen.
• If the monitor touches an obstacle while the angle is being adjusted,
it will stop immediately.
• The screen colour will vary when viewed at certain angles. Adjust the
screen angle for the best viewing position.
• If the voltage of the vehicle’s battery power is low, the screen may
blink when the screen angle is changed. This is normal and not a
malfunction.
18-EN
Displays the source selection list.
(The kind of source modes that are displayed varies
depending on connection and setting).
Changes to Setup Select screen.
Adjusting the Volume
Adjust the volume by pressing
or
.
Volume decreases/increases continuously by pressing and
or
.
holding
Volume: 0 - 35
Lowering Volume Quickly
2
Touch [Radio].
The screen changes to the Radio mode main display.
• If your desired source is not displayed on the screen, touch [ ] to
change the items of the source selection list first. Then touch the
desired source key.
Display example for FM Radio main screen
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to its
previous level.
How to view the Display
TOUCH PANEL operation
• To protect the display, touch the onscreen button with the tip of your
finger.
• If you touch a button and there is no reaction, remove your finger
from the display once, and try again.
• If you touch two buttons at the same time, a malfunction may occur.
Onscreen buttons are expressed as follows in this Owner’s
Manual.
• Onscreen buttons are shown in bold, enclosed in [ ] (e.g.
[BAND]).
Displays the source name, such as radio band, etc.,
that is selected.
Changes to the Bass*1, Treble*1 and Subwoofer*2 Level
adjustment screen directly.
• If the optional IMPRINT audio processor is connected, the Bass and
Treble Level can be adjusted only when MultEQ is set to Curve 1 or
Curve 2 (page 50).
• If an optional external audio processor is connected, when touch this
button, the display will change to Balance/Fader, Subwoofer Level
and Defeat setting screen directly.
Displays the time.
Function Guide:
The function guide display varies depending on each
source.
The contents of the function guide change by touching
[P1/2]*3, [P1/3]*3 or [P1/4]*3 on the function guide, and
many other operations can be performed.
Recalling the Source
Here is an example explanation for the Radio mode display on how to
recall a source.
1
Press SOURCE/
Displays the icon of current source or artwork image*4.
on the unit.
If the GUIDEVIEW WINDOW™ mode is activated, the
information of Navigation system will be displayed in this
area.
The Source Select screen is displayed.
Display example for SOURCE selection screen
*1
*2
Adjustment cannot be performed when DEFEAT is set to ON.
Adjustment cannot be performed when SUBWOOFER is set to OFF
(page 34).
*3 Display may vary depending on the connected devices.
*4 If the playing song contains artwork data, the artwork image can be
displayed (Only for USB Audio and iPod mode).
• When an optional DVD player or DVD changer is connected via
Ai-NET, AUX appears as “EXT. DVD” or “DVD CHG.” on the
display.
• When both the optional DVD player and DVD changer are connected
via Ai-NET, AUX appears as “EXT. DVD” and DVD changer as
“DVD CHG.” in the display.
Changes the items of source selection list.
Changes to the Telephone Menu screen.
(Displayed only when BLUETOOTH IN is set to ON
(page 49)).
Displays the view video of camera.
(When an optional camera is connected and Camera IN
is set to Direct or RCA (page 48)).
Changes to main source screen.
19-EN
Displaying the Numeric Keypad Input
Screen
The numeric keypad input screen is displayed when the DVD or Video
CD mode is selected for searching a title or chapter, and also for
entering a country code or password for the DVD setup item.
1
2
Radio
Display example for FM Radio main screen
Touch [10KEY] on the main source screen.
Touch the desired numeric key.
Display example for numeric keypad
Input screen area.
Closes numeric keypad input screen.
All input numbers will be deleted.
Previous number will be deleted.
Input number is confirmed.
Numeric keypad.
The numeric keypad input screen closes if the area is
touched while displayed.
Changes to Image Brilliance adjustment screen directly.
(Adjustable only when the vehicle is in parking mode.)
3
Touch [Enter] to confirm your entry.
Displays the preset number/frequency
[DX SEEK]*1 button: Displays the tuning mode selection
list.
[PTY SEARCH]*2 button: Search for a station by PTY
(Programme Type) Tuning, refer to “PTY (Programme
Type) Tuning” (page 22).
*1 The button displays the current tuning mode.
*2The button displays only when the tuning mode of PTY is selected.
Listening to the Radio
1
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
Touch [Radio].
The radio mode is activated and the display changes to the
Radio Mode screen.
3
Touch [BAND] to select the desired radio band.
Each press changes the bands as follows:
FM-1
4
FM-2
FM-3
MW
LW
FM-1
Touch [DX SEEK] to choose the tuning mode.
DX SEEK
Local SEEK
MANUAL
PTY
• There are two modes you can select for auto tuning, DX and Local:
- DX (Distance) mode;
Both strong and weak stations will be tuned in.
- Local mode;
Only strong stations will be tuned in.
The initial setting is DX.
5
Touch [
], [
] or [
], [
] to change the
radio frequency up or down respectively.
When touched and held in the manual mode, the frequency
changes continuously.
20-EN
Presetting Stations Manually
1
2
3
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
RDS Operation
Display example for RDS main screen
Touch [P1/2] to change the function guide.
Touch and hold any one of the preset buttons
[P.SET 1] through [P.SET 6] for at least 2 seconds.
The selected station is stored.
4
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
band desired and repeat the procedure.
A total of 30 stations can be stored in the preset memory (6
stations for each band; FM1, FM2, FM3, MW and LW).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.
Presetting Stations Automatically
The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
After selecting the desired band, touch and hold
[A.MEMO] for at least 2 seconds.
The tuner automatically seeks and stores 6 strong stations into
[P.SET 1] to [P.SET 6] in order of signal strength.
When the automatic storing has been completed, the tuner goes
to the station stored in [P.SET 1].
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
A
Displays the Radio text (When a Radio station that
transmits text messages).
Turning AF (Alternative Frequencies) On
or Off
The RDS (Radio Data System) is a radio information system using the
57 kHz subcarrier of regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic information, station
names, and to automatically re-tune to a stronger transmitter that is
broadcasting the same programme.
1
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
Touch [
] on the main source screen.
The Setup Select screen is displayed.
3
Touch [
] of Source Setup.
The Source Setup screen appears.
4
Touch [
] of RDS Setup.
The display changes to the RDS mode screen.
Tuning to Preset Stations
5
You can tune in the preset stations in memory on each band using the
preset number.
1
2
After selecting the desired band, touch [P1/2] to
change the function guide.
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] that has a station stored to it.
The preset station is received.
Touch [AF] to select the AF (Alternative Frequency)
ON or OFF mode.
When ON is selected, the “AF” indicator lights up.
• RDS Setup mode will not be displayed when the band of radio is set
to MW or LW.
• When the AF ON mode is selected, the unit automatically tunes to a
strong signal station in the AF list.
• Use the AF OFF mode when automatic re-tuning is not required.
6
Touch [
] to return to the previous screen.
• Touching [Exit] will turn off the Setup screen, and return to previous
main screen.
Tips
• If the unit receives the PTY31 (Emergency Broadcast) signal, the unit
will show “Alarm” in the display only when PTY31 is set to on. For
operation, refer to “Setting PTY31 (Emergency Broadcast)
Reception” (page 43).
• The RDS digital data includes the following:
PI
Programme Identification
PS
Programme Service Name
AF
List of Alternative Frequencies
TP
Traffic Programme
TA
Traffic Announcement
PTY
Programme Type
EON
Enhanced Other Networks
21-EN
• Refer to page 43 about “PI Seek Setting”, “Receiving RDS Regional
(Local) Stations”, “Switching the Display Language of PTY
(Programme Type)” and “Setting PTY31 (Emergency Broadcast)
Reception”.
Receiving Traffic Information While
Playing CD or Radio
Receiving Traffic Information
The example explained here is how to receive the traffic information
broadcast during CD playback.
Press and hold AUDIO
/TA for at least 2 seconds to
turn on the Traffic Information mode.
1
In the CD mode, press and hold AUDIO
/TA for
at least 2 seconds to turn on the Traffic information
mode.
When the traffic information station is tuned in, the TA indicator
lights up.
The unit automatically starts to search the receivable traffic
broadcasts.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode.
When a traffic information broadcast begins, the unit
automatically receives it and the display shows “T. Info”.
When the traffic information broadcast is searched out, the
CD mode is switched to the Radio mode and the unit
receives the traffic information broadcast.
• When the traffic information broadcast starts, the unit
automatically mutes the CD.
• When the traffic information broadcast finishes, the unit
automatically returns to the original source you were
playing before the traffic information broadcast began.
When traffic information broadcast is over, the unit will
automatically set in the standby mode.
• If the traffic information broadcast signal falls below a certain level, the
unit remains in the receiving mode for 1 minute. If the signal remains
below a certain level for over 70 seconds, “TA” blinks in the display.
• If you do not want to listen to the traffic information being received,
lightly press MAP to skip that traffic information message. The
T. INFO mode will remain in the ON position to receive the next
traffic information message.
• If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.
PTY (Programme Type) Tuning
RDS SETUP mode
1
Touch [PTY] on the screen.
FM Radio mode
1
2
* The button displays the current tuning mode.
Touch [ ] or [ ] after activating the PTY mode to
choose the desired programme type while “PTY”
(programme type) is displayed.
Each press scrolls the programme type by one.
This function allows you to preset to give priority to the News
programme. You will never miss the News programme as the unit
automatically gives priority to the News programme whenever it begins
broadcasting, and interrupts the programme you are currently listening.
This feature is functional when your unit is set to a mode other than the
LW and MW modes.
1
Touch [PTY] after selecting the programme type to start
searching for a station of the selected programme type.
FM Radio mode
3
Touch [PTY SEARCH] after selecting the
programme type to start searching for a station of
the selected programme type.
If no station is found, “NO PTY” will be displayed.
22-EN
Touch [NEWS] on the RDS setup screen to activate
the PRIORITY NEWS mode.
The “NEWS” indicator appears in the display. Touch
[NEWS] again to deactivate the Priority News mode and
return to the programme you were previously listening.
2
Touch [
] to return to the previous screen.
Displaying Radio Text
Text messages from a radio station can be displayed.
1
2
RDS SETUP mode
3
When the traffic information broadcast has finished,
the unit returns to the CD mode.
Priority News
Touch [DX SEEK]* to choose the PTY tuning mode.
The PTY mode is activated.
The Programme Type of the station being currently received
will be displayed.
2
• The receiver is equipped with the EON (Enhanced Other Networks)
function so if the station being received does not broadcast the traffic
information, the receiver automatically tunes in the related station
that broadcasts the traffic information.
3
Tune in a radio station that transmits text messages.
Touch [INFO.] in the FM radio mode to activate the
Radio Text mode.
To change the Radio Text display, touch [INFO.].
• If there is no receivable text message or the unit cannot receive a text
message properly, the display is blank.
CD/MP3/WMA/AAC
Display example for MP3/WMA/AAC main screen
Returning to the beginning of the current track (file) :
Touch [
].
Fast reverse :
Touch and hold [
].
Advancing to the beginning of the next track (file) :
Touch [
].
Fast forward :
Touch and hold [
].
To pause playback
Touch [ /
Touching [
].
/ ] again will resume playback.
Inserting/Ejecting a Disc
Refer to “Inserting/Ejecting a Disc” (page 18).
[ ] button: Refer to page 36
CD: Displays the Track text*1/Disc text*1.
• If there is neither Track nor Disc name information, “No Text” will
be displayed.
MP3/WMA/AAC:
After displaying the file name in the upper line, the track
name is displayed if there is ID3 tag information.
After displaying the folder name in the lower line, the album
name/artist name are displayed if there is ID3 tag
information.
CD:
Displays play state/the disc number*2/track number/
progress bar/elapsed time/remain time.
MP3/WMA/AAC:
Displays play state/the disc number*3/folder number/track
number/progress bar/elapsed playback time/remain time.
*1 Displayed when a CD text disc is inserted.
*2 Displayed when a CD changer is connected.
*3 Displayed when an MP3 compatible CD changer is connected.
• If the disc does not eject, press and hold
for at least 3 seconds.
• The INA-W910R model includes a built-in MP3/WMA/AAC unit. You
can play CD-ROMs, DVD-ROMs, CD-Rs, CD-RWs, DVD-Rs, DVDRWs, DVD+Rs and DVD+RWs containing MP3/WMA/AAC files on
this unit. Use the format compliant with this unit. For further
information about playing or storing MP3/WMA/AAC files, refer to
pages 24 and 25 before using the unit.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store that are not DRM-Free and files that are copyprotected cannot be played back on this unit.
• The unit can play discs containing both audio data and MP3/WMA/
AAC data.
• The track display for CD audio data playback is the track numbers
recorded on the disc.
• Three-inch (8cm) CD’s can be used.
• “Playing MP3/WMA/AAC Data (File Play Mode)” is mentioned on
page 41.
• If an MP3/WMA/AAC disc with many files and folders is played, it
takes a little longer than normal to start playback.
• Touch [
] to activate the search mode. For operations, refer to
“Search Function” on page 36.
However, the search mode function does not work in the CD changer
mode.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• When the CD/MP3 changer source is selected, progress bar, etc. will
not be displayed.
Repeat Play
Playback
Touch [
] to play back repeatedly the track currently
being played.
The track (file) will be played repeatedly.
1
Press SOURCE/
on the unit.
Touch [
The Source Select screen is displayed.
2
CD:
Touch [Disc].
The display shows the Disc screen.
When a CD/MP3/WMA/AAC is inserted into the DISC SLOT
of the INA-W910R, with the label side facing up, the unit
starts to play the CD/MP3/WMA/AAC.
3
Touch [
(file).
] or [
] to select the desired track
] again and select OFF to deactivate Repeat play.
*1
(Repeat one) (Repeat disc)
(off)
MP3/WMA/AAC:
1 Touch [P1/2]*3 to change the function guide.
2 Touch [
] and select the desired Repeat play.
(Repeat one)
*2
(Repeat folder)
*1
(Repeat disc)
(off)
*1 If a CD Changer or an MP3 compatible CD changer is connected
mode is selected, the unit repeatedly plays back all
and the
tracks (files) on the disc selected.
*2 Only files in a folder are repeatedly played back.
*3 Display may vary depending on the connected devices.
23-EN
What is WMA?
M.I.X. (Random Play)
Touch [
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data and can achieve CD quality
sound with small file sizes.
] during playback.
The tracks (files) on the disc will be played back in a random
sequence.
To cancel M.I.X. play, touch [
ALL*1
CD:
AAC is the abbreviation for “Advanced Audio Coding,” and is a
basic format of audio compression used by MPEG2 or MPEG4.
].
Method for creating MP3/WMA/AAC files
(off)
MP3/WMA/AAC:
[P1/2]*4
1 Touch
2 Touch [
*3
to change the function guide.
] and select the desired M.I.X. play.
*2
(off)
*3
*1 If a CD Changer equipped with the
ALL function is connected,
ALL will also be selectable.
In this mode, the tracks on all the CDs in the current magazine will
be included in the random playback sequence.
*2 If an MP3 compatible CD changer is connected, all files in a disc are
played back in random sequence, and playback shifts to the next disc.
*3 Only files in a folder are played back in random sequence in the
mode.
*4 Display may vary depending on the connected devices.
• If the search mode (page 36) is activated, the M.I.X. Play mode will
be cancelled.
Selecting Folders (concerning MP3/
WMA/AAC)
Touch
[ ] or [ ] to select the folder.
About MP3/WMA/AAC
CAUTION
Except for private use, duplicating audio data (including MP3/
WMA/AAC data) or distributing, transferring, or copying it,
whether for free or for a fee, without permission of the copyright
holder is strictly prohibited by the Copyright Act and by
international treaty.
What is MP3?
MP3, whose official name is “MPEG-1, 2, 2.5 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth
their original size. This is achieved while still maintaining
near CD quality. The MP3 format realises such high
compression ratios by eliminating the sounds that are either
inaudible to the human ear or masked by other sounds.
24-EN
What is AAC?
Audio data is compressed using software with MP3/WMA/AAC
codecs. For details on creating MP3/WMA/AAC files, refer to the
user’s manual for that software.
MP3/WMA/AAC files that can be played back by this device
have the following file extensions:
MP3: “mp3”
WMA: “wma” (ver. 7.1, 8, 9, 9.1 and 9.2 are supported)
AAC: “m4a”
WMA is not supported for the following files, Windows Media
Audio Professional, Windows Media Audio 9 Voice or Windows
Media Audio 9 Pro Lossless.
There are many different versions of the AAC format. Confirm
that the software being used conforms to the acceptable
formats listed above. It’s possible that the format may be
unplayable even though the extension is valid. Playback of AAC
files encoded by iTunes is supported.
Supported playback sampling rates and bit rates
MP3
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
32 - 320 kbps
WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz
Bit rates:
48 - 192 kbps
AAC
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
16 - 320 kbps
This device may not play back correctly depending on sampling
rates.
ID3 tags/WMA tags
This device supports ID3 tag v1 and v2, and WMA tag.
If tag data is in an MP3/WMA/AAC file, this device can display
the title (track title), artist name, and album name ID3 tag/WMA
tag data (maximum 128 characters).
This device can only display single-byte alphanumeric
characters and the underscore. For non-supported characters,
“No Support” is displayed.
The number of characters may be limited, or not correctly
displayed, depending on the tag information.
Producing MP3/WMA/AAC discs
MP3/WMA/AAC files are prepared, then written to a CD-R or
CD-RW (DVD-R/DVD-RW) using CD-R writing software. A disc
can hold up to 4,096 files/256 folders (including Root Folders),
and the maximum number of folders is 255.
Playback may not be performed if a disc exceeds the limitations
described above.
Media supported
Terminology
The media that this device can play back are CD-ROMs, CD-Rs,
CD-RWs, DVD-Rs and DVD-RWs.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, etc., and other
standards that conform to ISO9660. However, sometimes the file
names, folder names, etc., are not displayed correctly.
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,
so the sound is sampled (recorded) 44,100 times per second. The
higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
Formats supported
This device supports CD-ROM XA, Mixed Mode CD, Enhanced
CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
Order of files
Files are played back in the order that the writing software writes
them to the disc. Therefore, the playback order may not be
what's expected. Verify the writing order in the software's
documentation. The playback order of the folders and files is as
follows. (The following numbers may differ from actually
displayed numbers.)
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA/AAC files.
Root folder
The root folder (or root directory) is found at the top of the file
system. The root folder contains all folders and files. It is created
automatically for all burned discs.
Root
Folder
Folder
MP3/WMA/AAC File
25-EN
DVD/Video CD
Display example for DVD Video main screen
Playing a Disc
INA-W910R has a built-in DVD player. When an optional Alpine DVD/
Video CD/CD player (or DVD changer) is connected to the
INA-W910R, you can control it from the INA-W910R (except some
operations).
WARNING
It is dangerous for the driver to watch the TV/DVD/
Video while driving the vehicle. The driver may be
distracted from looking ahead and an accident could
occur.
Install the INA-W910R correctly so that the driver
cannot watch TV/DVD/Video unless the vehicle is
stopped and the emergency brake is applied.
A
B
Displays the disc (DVD VIDEO, DVD AUDIO, VIDEO
CD) being played back.
Displays tag information for DivX®.
Displays the elapsed playback time.
• If [
] on the DivX® mode screen is touched, the search list screen
is displayed. Refer to “Search Function” (page 36).
• Some operations cannot be carried out depending on the disc or
playback screen.
• Displays of the function guide [P1/2], etc., may vary depending on
the connected device(s).
Changes the Contrast Level adjustment screen directly.
For details, refer to “Adjusting Image Brilliance (Live
Contrast)” on page 44.
Disc types that can be used for each heading are
represented by the following marks.
DVD Commercial Video discs (used for the
distribution of movies, etc.) or a DVD-R/DVDRW, DVD+R/DVD+RW recorded in a video
mode can be used.
(Including discs containing both DVD video
and DVD audio data that are played back
when “Video” is set in “Setting the DVDAudio Playback Mode” (page 41)).
DVD Commercial Audio discs can be used.
Video-CD discs can be used.
CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs that are recorded in the
DivX® mode can be used.
26-EN
If the INA-W910R is not installed correctly, the driver
will be able to watch the TV/DVD/Video while driving
the vehicle and may be distracted from looking ahead
causing an accident. The driver or other people could
be severely injured.
To display the DVD mode screen
• If you try to activate the auxiliary device while driving, the display
will show the warning-Picture off for your safety.
Caution
• Not all functions will operate for every DVD. See the
individual DVD’s instructions for details on the
features supported.
• Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc and
check for fingerprints on the playback side. Clean
the disc if necessary.
• If you switch the power or Ignition Key OFF or
change sources during playback, playback will
continue where you left off when you resume
playback.
• If you try to perform an invalid operation (based on
the type of disc being played), the following mark is
displayed on the monitor screen:
• Play Position Memory Function
Even if you turn power off or switch the Ignition Key
to OFF during playback or change the source,
playback will continue from the point where
playback stopped when the power is turned ON
again.
1
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
Touch [Disc].
Menu Operations
1 Touch any area on DVD mode screen to display the operation
keys.
The display shows the DISC mode screen.
Insert a disc with the label side facing up. The unit starts to
play the disc.
• The operation screen changes to the visual screen in the DVD or
Video CD mode for 5 seconds after an operation has been performed.
Touch the display panel to display the operation screen again.
• The display mode can be changed by touching [WIDE].
For operation, see “Switching Display Modes” on page 37.
Inserting/Ejecting a Disc
Refer to “Inserting/Ejecting a Disc” (page 18).
• The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
• If the disc does not eject, press and hold
for at least 3 seconds.
• Do not insert discs containing maps for the navigation system. Doing
so could result in damage.
• Refer also to “DVD Setup” (pages 38 to 42).
• Be sure the remote input lead is connected to the remote output lead
of this unit when a DVD changer or DVD player is connected. If not
correctly connected, touch operation cannot be performed.
• “Can’t Downmix” is displayed when a Downmix (multi-channel
signals are mixed into 2ch) prohibited section of a DVD-Audio disc is
played. In this case, only the Lch/Rch recorded on the disc is output
as sound. (The sound of Centre speaker, L-surround speaker,
R-surround speaker, and Subwoofer is not output.)
• While “Index Reading” is displayed by DivX®, the fast-forwarding/
fast-reversing and repeat functions, etc. cannot be used.
If a menu screen appears
On DVDs and Video CDs with playback control (PBC), menu screens
may appear automatically. If this happens, perform the operation
described below to start playback.
2 Touch [Key].
The menu operation mode will be displayed.
Touch [Return] to return to the previous display.
(Operation may not be possible, depending on the disc.)
3 Select a desired menu item by touching [ ], [
4 Touch [Enter] to confirm the selected item.
], [
] or [
].
• If no operation is performed for 5 seconds, the unit will return to the
DVD menu screen.
Numeric Keypad Input Operations
1 Touch any area on DVD mode screen to display the operation
keys.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 41).
Direct Menu Operations
1 Touch the DVD menu directly.
• Some operations cannot be performed depending on the disc.
2 Touch [Key].
The menu operation mode appears.
3 Touch [Key] again.
The numeric keypad input mode screen appears.
27-EN
Displaying the Menu Operation Mode
Screen
The numeric
keypad input
screen
closes when
the area is
touched
while
displayed.
1
Touch [P1/2]* on the DVD mode main screen.
The function guide changes.
* The display differs, depending on the disc (mode).
2
Touch [X] to close the numeric
keypad input screen.
4 Touch a desired number.
5 Touch [Enter] on the numeric keypad mode screen to confirm
your selection.
Numeric Keypad Input Operations
When PBC is turned OFF, the menu screen is not displayed. Turn
it ON to display the screen (see “Setting the Video CD Play
Mode” on page 42).
1 Touch [P1/2] in the Video CD mode to change to the function
guide.
2 Touch [10KEY].
The numeric keypad is displayed.
3 Touch and input a desired number.
4 Touch [Enter] to confirm.
Displaying the Top Menu Screen
When a DVD contains two or more titles, the top menu screen appears.
Touch [MENU CONT].
The menu operation mode screen appears.
• For further operation, see “If a menu screen appears” on page 27.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 41).
Stopping Playback (Pre Stop)
Press the stop button during playback to stop playback. That position is
stored in the memory.
1
Touch [ ] once during playback.
“Pre Stop” is displayed.
2
Touch [
/
] in the Pre Stop mode.
Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped may not
be accurate.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 41).
Touch [TOP MENU] on the DVD mode main screen.
The top menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
page 27.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 41).
Displaying the Menu Screen
With a DVD having two or more menus, a menu screen will appear for
the programmes available, in addition to the main programmes.
Touch [MENU] on the DVD mode main screen.
The menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
page 27.
28-EN
Stopping Playback
Touch [ ] twice or touch and hold [ ] for at least 2
seconds during playback.
“Stop” is displayed, and playback stops.
• Playback starts from the beginning when [
playback is stopped.
/
] is touched while
Fast-forwarding/Fast-reversing
Playing Still Frames (Pausing)
DVD-Video, Video-CD, DVD-Audio (VCAP mode)*, DivX®:
1
2
1
During playback, touch and hold [
reverse) or [
] (fast-forward).
] (Fast-
When touched and held for more than 1 second, the disc is
forwarded/reversed at double speed. When held for 5 more
seconds or longer, the disc is forwarded/reversed at 8 times
the normal speed. When held for 10 seconds or longer, the
disc is forwarded/reversed at 21 times the normal speed.
2
During playback, touch and hold [
reverse) or [
] (fast-forward).
Stop touching [
playback.
] or [
Touch [
/
/
].
] to resume playback.
• No sound is played during the still frame mode.
• The image or sound may stop temporarily when playback starts from
the pause mode. This is not a malfunction.
Forward/reverse frame-by-frame
Playback
DVD-Audio (VOFF mode)*:
1
During playback, touch [
] (Fast-
] to return to normal
1
In the pause mode, touch [
] or [
].
The picture advances or reverses by one frame each time
the button is touched.
2
Touch [
/
] to return to normal mode.
* When “VCAP” or “VOFF” is set in “Setting the DVD-Audio
Playback Mode” (page 41).
• No sound is output during forward/reverse frame-by-frame playback.
• Reverse frame-by-frame cannot be carried out on the Video CD.
• No sound is played during fast-forwarding/fast-reversing.
• For DVDs and Video CDs with playback control (PBC), the menu
screen may reappear during fast-forwarding/fast-reversing.
• Operation may not be possible, depending on the disc.
Slow Motion Playback
Finding the Beginnings of Chapters/
Tracks/Files
During playback, touch [
] or [
].
The chapter/track/file switches each time the button is touched,
and playback of the selected chapter/track/file starts.
:Touch this to start playback from the beginning of the
following chapter, track or file.
:Touch this to start playback from the beginning of the
current chapter, track or file.
• Some DVDs do not have chapters.
• Be sure to turn PBC off before starting the search (see “Setting the
Video CD Play Mode” on page 42).
Supplementary explanation
1
2
When [
] or [
] is touched and held while in
the pause mode, the 1/8th speed slow motion
playback mode is set.
When held in for 5 more seconds, the slow motion
speed switches to 1/2 the normal speed.
Stop touching [
] or [
[ / ] to play back.
] to pause, and touch
• No sound is played during slow motion playback.
• Reverse slow motion playback is not available on the Video CD.
• 1/2, 1/8 are approximate speeds. The actual speed differs from disc to
disc.
Selecting Folders
Touch
[
] or [
] to select the folder.
“Chapters” are divisions of movies or musical selections on
DVDs.
“Tracks” are divisions of movies or musical selections on
Video CD, DVD Audio and music CDs.
“Groups” associate a track (one song) with other tracks
stored on a DVD-Audio. Group playback differs depending
on the disc.
29-EN
VOFF mode*1:
Repeat Playback
The track is played repeatedly.
The group is played repeatedly.
Use this function to play the disc’s titles, chapters or tracks etc.,
repeatedly.
The disc is played repeatedly.
DVD Video
1
Touch [
].
The repeat mode switches every time the button is touched.
*1 When “VCAP” or “VOFF” is set in “Setting the DVD-Audio
Playback Mode” (page 41).
DivX®
The chapter is played repeatedly.
1
Touch [
] after touching [P1/2].
The repeat mode switches every time the button is touched.
The title is played repeatedly.
The playback returns to normal mode.
The file is played repeatedly.
The folder is played repeatedly.
• Display may vary depending on the connected devices.
• The REPEAT mode is always turned off when [
] is touched and
held for at least 2 seconds.
Video CD
1
During playback, touch [
].
The disc is played repeatedly.
• The REPEAT mode is always turned off when [
held for at least 2 seconds.
] is touched and
The repeat mode switches every time the button is touched.
Searching by Title/Group/Folder Number
The track is played repeatedly.
The disc is played repeatedly.
* Playback does not repeat.
Use this function to easily find positions on the DVD using the DVD’s
title, Group or Folder number.
1
• Display may vary depending on the connected devices.
• The track/disc repeat modes cannot be used on Video CDs with
playback control (PBC). These modes can be carried out after
turning PBC off. See “Setting the Video CD Play Mode” on page 42.
• For some discs it is not possible to switch the repeat mode.
DVD Audio
1
Touch [P1/2]* while playback is stopped.
The function guide appears.
* Displayed only in the changer mode.
* The display differs, depending on the disc (mode).
2
Touch [10KEY].
The numeric keypad input mode screen appears.
3
Enter a desired title, Group or Folder by touching its
title, Group or Folder number.
See page 27 for operation of the numeric keypad.
Touch [
].
The repeat mode switches every time the button is touched.
Confirm your selection by touching [Enter].
Playback will start from the title number selected.
VCAP mode*1:
The track is played repeatedly.
The group is played repeatedly.
The playback returns to normal mode.
30-EN
4
• This function cannot be used on discs on which no title numbers are
recorded.
• Playback starts from the beginning of the chapter/track number in the
state of Pre Stop.
• Some disc may not accept any operation.
Searching Directly by Chapter, Track or
File Number
Scroll to Move the Page Forward or
Backward
Use this function to easily move to the beginnings of the chapters, tracks
or files on the disc.
“Page” is a still image stored on a DVD-Audio disc.
1
1
Touch [P1/2]* in any mode other than stop mode.
The function guide will appear.
Touch [P1/3] twice while playing a DVD-Audio disc
in VCAP mode*.
* The display differs, depending on the disc (mode).
* Playing back a DVD-Audio disc when “VCAP” is set in “Setting the
DVD-Audio Playback Mode” (page 41).
2
2
Touch [10KEY].
3
Touch and enter the chapter or track number you
want to play.
See page 27 for operation of the numeric keypad.
4
Touch PAGE [
] or [
].
The display switches.
Touch and hold to display the home page.
The numeric keypad input mode screen will appear.
• For DVD-Audio discs without Pages, depending on the DVD-Audio
disc, the “Page” function may not be operable if images are in slide
show form.
Touch [Enter] to confirm your selection.
Playback will start from the selected chapter or track.
• This function is not available for a disc on which chapters or tracks
are not stored.
• Be sure to turn PBC off before starting the search (See “Setting the
Video CD Play Mode” on page 42).
Switching the Angle
Switching the Audio Tracks
DVDs with multiplex audio or audio languages allow switching the
sound during playback.
1
During playback, touch [P1/2]*.
* The display differs, depending on the disc (mode).
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
1
* The display differs, depending on the disc (mode).
Touch [ANGLE].
The angle switches between the angles recorded on the
disc every time the button is touched.
•
•
-
Some time may be required for the angle to change.
Depending on the disc, the angle may switch in one of two ways.
Seamless: The angle switches smoothly.
Non-seamless: When the angle is switched, a still picture is displayed
first, after which the angle switches.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 41).
Touch [AUDIO].
The sound switches between the alternate audio tracks
recorded on the disc every time the button is touched.
During playback, touch [P1/2]*.
The function guide changes.
2
2
• The alternate track selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc’s default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
Video CDs with multiplex audio
1
During playback, touch [P1/2].
The function guide changes.
2
Touch [AUDIO].
The left and right channels will be output as shown, each
time the button is touched.
Audio LR
Audio LL
Audio RR
Audio LR
31-EN
Switching the Subtitles (Subtitle
Language)
With DVDs on which multiple subtitle languages are recorded, the
subtitle language can be switched during playback; moreover, subtitles
can be hidden.
1
During playback, touch [P1/2]*.
The function guide changes.
* The display differs, depending on the disc (mode).
2
Touch [SUBT.].
Touching this button repeatedly selects sequentially the
subtitle languages recorded on the disc, and then turns the
subtitles OFF.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 41).
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVDs menu.
• The subtitle language selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that language, the disc’s default language is selected instead.
However, the subtitle language may differ depending on the disc.
• For some discs, the subtitles will be displayed even when this is set to
OFF. However, the subtitle language may differ depending on the
disc.
Switching from the disc menu
For some discs, the audio language, angle and subtitles can be switched
from the disc menu.
1
2
Touch [MENU] or [TOP MENU] to display the
menu.
About DivX
DivX® is a codec (software) programme to compress moving images
while maintaining image quality using a highly advanced compression
ratio and operating speed.
• Official DivX® Certified product
• Plays all versions of DivX® video (including DivX® 5) with
standard playback of DivX® media files
• DivX®, DivX Certified® and associated logos are trademarks of
DivX, Inc. and are used under license.
DivX Certified® to play DivX® video, including premium
content.
The unit can play back CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs that are recorded in the DivX® mode with
extension “avi” or “divx”.
The optimum size for DivX® disc playback is as follows:
Screen Size:
32 to 720 pixel (horizontal) × 32 to 576 pixel
(vertical)
With an aspect ratio other than 16:9, black bars may be
displayed on the left and right sides, or at the top and bottom of
the screen.
Image bit rate:
“average 4 Mbps, Peak 8 Mbps”
Home Theatre Profile supported
The following audio recording systems are supported.
MPEG1 Layer II
MPEG1 Layer III
MPEG2 Layer III
MPEG2.5 Layer III
Dolby Digital
64 to 384 kbps
32 to 320 kbps
8 to 160 kbps
8 to 160 kbps
64 to 448 kbps (Max. 5.1ch)
ABOUT DIVX VIDEO:
DivX® is a digital video format created by Divx, Inc.
This is an official DivX Certified® device that plays DivX video.
Visit divx.com for more information and software tools to convert
your files into DivX video.
Select an item to confirm it.
See “If a menu screen appears” on page 27.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 41).
32-EN
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in
your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
Display Example for Balance/Fader Screen
\
Other Useful
Features
Adjusting the Audio
1
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
Touch [
] on the main source screen.
The Setup Select screen is displayed.
3
Touch [
] of Audio Setup.
A
The Audio Setup screen appears.
Display Example for Audio Setup Screen
Adjusting the Fader
Touch [F] or [R] to adjust the volume of the front and
rear speakers.
Setting range: F15 to R15
• If an IMPRINT audio processor (PXA-H100) is connected to this unit
and you have set the 2.2ch (3WAY)/4.2ch (FRONT/REAR/SUBW.)
switch of the IMPRINT audio processor (PXA-H100) to 2.2ch
(3WAY), you cannot adjust the FADER mode. For details, refer to the
Owner’s Manual of PXA-H100.
B
Adjusting the Balance
Touch [L] or [R] to adjust the sound volume of the left
and right speakers.
Setting range: L15 to R15
C
• When the optional IMPRINT audio processor (PXA-H100) or an
external audio processor is connected, the “A.Processor” list is
displayed. For details on operation, refer to “IMPRINT Operation
(Optional)” (page 50) or “External Audio Processor Operation
(Optional)” (page 56).
• Touching [ ] or [ ] will scroll the list one line at a time.
• Touching [ ] or [ ] will scroll the list one page at a time.
• Touching [
] to return to the previous screen.
Adjusting the Balance/Fader Directly
Touch and move [
] to a desired setting.
Or touch a desired setting range, and [ ] will move to that
location.
Touch [L] or [R] of Balance and [F] or [R] of Fader for fine-tuning.
Adjusting Bass/Treble
You can change the bass or treble frequency emphasis
to create your own tonal preference.
... This item is controllable with the INA-W910R only.
Touch [
... This item is available when the optional IMPRINT
audio processor (PXA-H100) is connected.
... This item is available when an External Audio
Processor is connected.
• Adjustment cannot be performed when Defeat is set to ON.
• If OFF is set in “Changing MultEQ mode” (page 50) when the
IMPRINT audio processor is connected, the list is not displayed.
Adjusting Balance/Fader
Touch [
] of Balance/Fader.
The display changes to the Balance/Fader adjusting
screen.
] of Bass/Treble to adjust screen.
Setting the Bass level
You can emphasise or weaken the bass frequency.
Touch [
] or [
] of Bass Level to select the desired bass level.
Setting range: –7 to +7
Setting the treble level
You can emphasise the treble frequency.
Touch [
level.
] or [
] of Treble Level to select the desired treble
Setting range: –7 to +7
33-EN
Adjusting Bass/Treble
Adjusting the Subwoofer Level
You can change the bass or treble frequency emphasis
to create your own tonal preference.
When ON is set in “Subwoofer On and Off ”, the item is
displayed.
When an External Audio Processor is connected, the list is not
displayed.
Touch [
] of Bass/Treble to adjust screen.
• Adjustment cannot be performed when Defeat is set to ON.
Setting the Bass level
You can emphasise or weaken the bass frequency.
Touch [
] or [
] of Bass Level to select the desired bass level.
Setting range: –6 to +6
1 Touch [
] of Subwoofer.
The display change to the Subwoofer Adjusting screen.
2 Touch [
] or [
] of Level to adjust the subwoofer output.
Setting range: 0 to 15
Switching the Subwoofer phase
• When G-EQ is set in “Setting EQ mode” (page 35), the level value
may change correspondingly with the value set in Band 1.
• When P-EQ is set in “Setting EQ mode” (page 35), the level value
may change correspondingly with the value set in Band 1.
When ON is set in “Subwoofer On and Off” while the car is
parked, the item is displayed.
The subwoofer output phase is toggled subwoofer normal (0°) or
subwoofer reverse (180°).
Setting the treble level
You can emphasise or weaken the treble frequency.
1 Touch [
] of Subwoofer.
The display change to the Subwoofer Adjusting screen.
Touch [
level.
2 Touch [
] or [
] of Treble Level to select the desired treble
• When G-EQ is set in “Setting EQ mode” (page 35), the level value
may change correspondingly with the value set in Band 7.
• When P-EQ is set in “Setting EQ mode” (page 35), the level value
may change correspondingly with the value set in Band 5.
] of Bass Freq. to select the desired bass centre
80 Hz
100 Hz
200 Hz
• The operation can be performed only when the P-EG is selected in
“Setting EQ mode” on page 35.
• When P-EQ is set in “Setting EQ mode” (page 35), the bandwidth
value may change correspondingly with the value set in Band 1.
Setting the Bass Bandwidth
Changes the boosted bass bandwidth to wide or narrow.
A wider setting will boost a wide range of frequencies
above and below the centre frequency. A narrower
setting will boost only frequencies near the centre
frequency.
Touch [ ] or [
bandwidth.
] of Bass Bandwidth to select the desired bass
• The operation can be performed only when the P-EG is selected in
“Setting EQ mode” on page 35.
• When P-EQ is set in “Setting EQ mode” (page 35), the bandwidth
value may change correspondingly with the value set in Band 1.
Setting the Treble Centre Frequency
The displayed treble frequency is emphasized.
16 kHz
17.5 kHz
• The operation can be performed only when the P-EG is selected in
“Setting EQ mode” on page 35.
• When P-EQ is set in “Setting EQ mode” (page 35), the frequency
value may change correspondingly with the value set in Band 5.
Subwoofer On and Off
Touch [
] or [
OFF:
ON:
34-EN
] of Subwoofer to set to ON or OFF.
Subwoofer output is off.
Subwoofer output is on.
2 Touch [
] or [
] of System to select to System 1 or System 2.
System 1: Subwoofer level changes according to the main
volume setting.
System 2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Setting the Subwoofer Channel
When ON is set in “Subwoofer On and Off” while the car is
parked, the item is displayed.
1 Touch [
] of Subwoofer.
The display change to the Subwoofer Adjusting screen.
2 Touch [ ] or [
(monaural).
] of Channel to select to Stereo or Mono
Stereo: Subwoofer stereo (L/R) output
Mono: Subwoofer monaural output
Adjusting the Subwoofer Level
When an external audio processor is connected, the list is
displayed.
Touch [ ] or [ ] of Subw. Level to adjust the subwoofer output.
Setting range: 0 to 15
Touch [ ] or [ ] of Treble Freq. to select the desired Treble
centre frequency.
12.5 kHz
When ON is set in “Subwoofer On and Off” while the car is
parked, the item is displayed.
• When the IMPRINT audio processor is connected, set “Changing
MultEQ mode” (page 50) to OFF while the car is parked.
Setting range: Wide (Narrow) 1 to Wide 4 (Wide)
Setting range: 10 kHz
Setting the Subwoofer System
1 Touch [
] of Subwoofer.
The display change to the Subwoofer Adjusting screen.
Setting the Bass Centre Frequency
The displayed bass frequency is emphasized.
Setting range: 63 Hz
] of Phase to select to 0° or 180°.
• When the IMPRINT audio processor is connected, set “Changing
MultEQ mode” (page 50) to OFF while the car is parked.
Setting range: –6 to +6
Touch [ ] or [
frequency.
] or [
Adjusting Nav. Mix Level
2
Touch [ ] or [ ] of Nav. Mix Level to adjust the volume of
navigation interruption.
Setting range: 0 to 15
• The setting navigation interruption is not displayed if an external
audio processor not compatible with Nav. Mix is connected.
• While an External audio processor is connected, this function may
inoperable when Defeat is set to ON.
L = (distance to farthest speaker) – (distance to other
speakers)
Refer to “Time Correction Value List” on page 54.
3
1
2
Select ON or OFF of MX by touching [ ] or [ ] of
Media Xpander.
Repeat step 2 to set another speaker.
By setting these values to make its sound reach the
listening position at the same time as the sound of other
speakers.
Setting the Media Xpander mode
When the Media Xpander is on, you can adjust the Media
Xpander level. While the car is parked, the item is displayed.
Adjust the distance (0.0 to 336.6 cm) of a desired
speaker by touching the respective [ ] or [ ]
button.
• The total adjustment distance for all speakers should be less than
680 cm (268.1 inch).
Setting the Time Correction Unit (T.Corr Parameter)
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
While the car is parked, this item is displayed.
You can change the unit, (cm or inch) of time correction.
Touch [ ] or [ ] of T.Corr Parameter to select cm or Inch.
Touch [
Setting item: T.Corr Parameter
] of Media Xpander after setting to ON.
The Media Xpander setup screen appears.
3
cm
Touch [ ] or [ ] of the current MX mode.
• Music source (such as USB and CDs, etc.) level can be set.
MX CD (No Effect, Level 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
MX CMPM (No Effect, Level 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
Inch
cm: The unit of time correction is cm.
Inch: The unit of time correction is Inch.
Setting EQ mode
While the car is parked, this item can be adjusted.
This setting gives you a choice of 5-band parametric, or 7-band
graphic equalizer.
Touch [ ] or [ ] of EQ Select to select P-EQ or G-EQ.
P-EQ: 5-band Parametric EQ.
G-EQ: 7-band Graphic EQ.
MX DVD (No Effect, Level 1 to 3)
The dialog portion of the video is reproduced more clearly.
• This setting item is ineffective when Defeat is ON or an external
audio processor is connected.
MX AUX (No Effect, Level 1 to 3)
Choose the MX mode that corresponds to the media connected.
Adjusting the parametric Equalizer Curve (P-EQ)
•
•
•
•
•
When No Effect is selected, MX effect of each MX mode will be OFF.
Each music source, such as CD, MP3 can have its own MX setting.
There is no MX mode for FM, MW and LW radio.
MX CMPM is applied for MP3/WMA/AAC and iPod/iPhone.
The MX setting can be performed only when a source is currently
selected.
• The function is inoperable when Defeat is set to ON.
Adjusting the Time Correction
While the car is parked, this item is displayed.
Before performing the following procedures, refer to “About Time
Correction” (page 54).
1
Touch [
] of Time Correction.
When P-EQ is set in “Setting EQ mode” while the car is parked,
this item can be adjusted.
You can modify the Equalizer settings to create a response curve
more appealing to your personal taste.
1
Touch [
] of EQ Select after selecting P-EQ in
“Setting EQ mode”.
The P-EQ list screen appears.
2
Adjust the P-EQ to your preference.
Adjusting the Band
Touch [
] or [
] of Band to select the band to be adjusted.
Band 1 / Band 2 / Band 3 / Band 4 / Band 5
The Time Correction screen appears.
35-EN
Adjusting the Frequency
Turning Defeat ON or OFF
Touch [
band.
Touch [
] or [
] of Freq. to adjust the frequency of the selected
Adjustable frequency bands: 63 Hz to 17.5 kHz (in 1/3 octave steps)
Band-1: 63 Hz~200 Hz (63 Hz)
Band-2: 160 Hz~1 kHz (160 Hz)
Band-3: 630 Hz~4 kHz (630 Hz)
Band-4: 1.6 kHz~10 kHz (1.6 kHz)
Band-5: 10 kHz~17.5 kHz (10 kHz)
Adjusting the Level
Touch [
] or [
] of Level to adjust the level of selected band.
Adjustable level: –6 to +6 dB
Setting the Bandwidth
Touch [
] or [
] of Q to select the bandwidth.
To adjust another band, repeat step 2 and adjust all
bands.
• The frequency value range of the current band should be higher than
the previous band’s setting value and lower than the next band’s
setting value.
• While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
• When the Parametric EQ is adjusted, the adjustment for Graphic EQ
becomes ineffective.
Adjusting the Graphic Equalizer Curve (G-EQ)
When G-EQ is set in “Setting EQ mode” while the car is parked,
this item can be adjusted.
You can modify the equalizer settings to create a response curve
more appealing to your personal taste.
1
2
Adjustment or setting contents of Time Correction and P/G-EQ can be
stored.
Contents that can be stored vary depends on the audio processor used.
1
2
3
Check whether the Defeat mode is OFF.
Touch [MEMORY] on the right side of bottom
screen.
Within 5 seconds, touch any one of the preset
buttons [P.SET 1] through [P.SET 6] on the bottom
screen.
The setting contents are stored.
• The stored contents will not be deleted even when the battery power
cord is detached.
Calling up the Preset Memory
1
2
Check whether the Defeat mode is OFF.
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] on the bottom display to select
the preset memory.
• It takes a few moments to call up the preset memory.
Touch [
] of EQ Select after selecting G-EQ in
“Setting EQ mode”.
Search Function
The G-EQ list screen appears.
1
Adjust the G-EQ to your preference.
Band-1 (80 Hz) / Band-2 (250 Hz) / Band-3 (500 Hz) /
Band-4 (1,000 Hz) / Band-5 (4,000 Hz) / Band-6 (8,000 Hz) /
Band-7 (16,000 Hz)
Touch [ ] on the function guide while in the CD or
MP3/WMA/AAC or DivX® mode.
The search list screen is displayed.
Select a desired track or folder
Touch [
Adjusting the Level
Touch [
] or [
] to adjust the level of selected band.
Adjustable level: –6 to +6 dB
3
] of Defeat to set to ON or OFF.
Storing Settings in the Memory
Adjustable bandwidth: 1, 2, 3, 4
3
] or [
To adjust another band, repeat step 2, and then
adjust all bands.
• When Graphic EQ is adjusted, the adjustment for Parametric EQ
becomes ineffective.
Adjusting Highpass Filter
When Defeat is set to OFF, touch the title bar of H.P.F. to adjust
screen.
Touch [ ] or [ ] of Front H.P.F. to adjust the front speaker.
Setting range: OFF, 60 Hz, 80 Hz, 100 Hz
Touch [
] or [
] of Rear H.P.F. to adjust the rear speaker.
Setting range: OFF, 60 Hz, 80 Hz, 100 Hz
• Select OFF when no adjustment is required.
36-EN
] for direct playback.
When a hierarchical list is prepared, [
] will be displayed.
Touch [
] to display the respective hierarchy list screens.
Display Example for Search Screen
Switching Display Modes
While your vehicle is parked, touch [WIDE] on the visual
source screen.
Each touch changes the display modes as follows:
Mode 1
(WIDE)
Select directly by touching [
], and its track (or
folder/file) is played back.
Touch [
] to return to the previous list screen.
[
] is displayed if there is a hierarchical list.
Touching [Exit] will change to the main source screen.
Scroll the list one page at a time by touching [ ] or [ ].
Scroll the list one line at a time by touching [ ] or [ ].
Mode 2
(CINEMA)
Mode 3
(NORMAL)
Mode 1
(WIDE)
In Mode 1 (Wide), the monitor displays a normal picture wider to
fit in a wide-screen monitor by evenly stretching out the picture
horizontally.
• The search function does not work on the DVD, Video CD or CD
changer.
• A folder list is displayed only during MP3/WMA/AAC playback when
the DVD player (DVA-5210) or changer compatible with MP3 is
connected.
Internal CD player mode
1 The track list* screen appears.
2 Touch [
] of a desired track text*.
The selected track will be played back.
• “No Text” is displayed in the track text list if there is no text on the
disc.
In Mode 2 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16:9 ratio.
* If the CD is text compatible only.
Internal MP3/WMA/AAC/DivX® Player/external
MP3-compatible DVD Player/Changer Mode
1 The folder list screen appears.
Select a desired folder and then touch [
].
([
] appears only when a file is present in the selected
folder.)
The file list screen is displayed.
• Touch [
In Mode 3 (Normal), the monitor displays a normal picture at the
centre of the screen with a vertical black band at each side.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVDAudio Playback Mode” (page 41).
] to play back the folder directly.
2 Touch [
] of a desired file name.
The selected file will be played back.
37-EN
Setup
DVD Setup
DVD Setup Operation
The Parking Brake must be engaged to access the DVD
mode screen. Attempting to access this screen while driving
will display the warning-Can’t operate while driving.
The numeric keypad input screen closes when the area
is touched while displayed.
Numeric keypad input screen
The numeric keypad is used if you want to play back in
a language other than that displayed, or to input your
parental lock password, etc.
The DVD Setup operation can be carried out after removing the
disc from the unit.
The following steps 1 to 6 are common operations to each
“Setting item” of DVD Setup. Refer to each section for details.
1
Touch [
] to return to the previous screen.
Touch [Exit] to return to the main source screen that was
displayed before the setup operation was started.
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
6
Touch [
] on the main source screen.
• Immediately after changing the settings of DVD mode (while the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
The Setup Select screen is displayed.
3
Touch [
] of Source Setup.
The Source Setup screen appears.
4
Touch [
] of DVD Setup.
The DVD Setup screen appears.
5
Touch [ ], [ ], etc., of the desired item to change
its setting.
Setting items:
Menu Language / Audio Language / SUBT. Language /
Country Code / Parental / Digital Out Mode / Downmix Mode /
TV Screen / Bonus Code / DVD-A Setup / File Play Mode /
DVD Play Mode / DivX Info. / PBC
Display example for DVD setup screen
Changing the language setting
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is convenient
when you always want to listen in English. (The language setting is not
effective on some discs. If not, the default language is set from the
factory.)
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
settings are cleared when the vehicle’s battery is disconnected.
• To temporarily change the language of the current disc, either do so
from the DVD menu or by using the operation described in the
section “Switching the Audio Tracks” (page 31).
• If the disc does not include the selected language, the disc’s default
language is set.
Setting of the Menu Language
Set the language used for the menus (title menu, etc.).
Setting item: Menu Language
Setting contents: Auto / EN / JP / DE / ES / FR / IT / SE / RU / CN
• When “Auto” is selected, the primary menu language among the
recorded ones is played.
Touch [Code] to display the numeric keypad input
screen.
Touch [ ] or [ ] to set a desired language.
Touch [ ] or [ ] to scroll a setting item list by one Line.
Touch [ ] or [ ] to scroll a setting item list by one page.
38-EN
Setting of the Audio Language
Set the audio language produced from the speakers.
Setting item: Audio Language
Setting contents: Auto / EN / JP / DE / ES / FR / IT / SE / RU / CN
• When “Auto” is selected, the primary audio language among the
recorded ones is played.
Setting of the Subtitle Language
Set the language of the subtitles displayed on the screen.
Setting item: SUBT. Language
Setting contents: Auto / EN / JP / DE / ES / FR / IT / SE / RU / CN
• When “Auto” is selected, the primary subtitle language among the
recorded ones is played.
To play in a language other than those displayed
1 Touch [Code].
The numeric keypad screen is displayed.
2 Touch the 4-digit numeral of the language number.
As for the language number, refer to “List of Language
Codes” (page 84).
3 Touch [Enter] to memorize the number.
Changing the Country Code Setting
Set the country number of which you want to set the rating level
(Parental lock).
Setting item: Country Code
Setting contents: Auto / Other
Auto:
Other:
The primary country code among the recorded ones is
played.
The setting content changes to “Other” if the desired
country code is input.
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
settings are cleared when the vehicle’s battery is disconnected.
1 Touch [Code] of Country Code.
2 Touch [Delete All] or [
].
Delete the displayed country number.
3 Touch the 4-digit country code.
As for the country number, refer to “List of Country
Codes” (pages 85, 86).
4 Touch [Enter] to memorize the code.
Setting the Rating Level (Parental Lock)
• Not all DVDs provide a Parental Lock feature. If you are unsure
about a DVD, play it first to confirm. Do not leave DVDs accessible
to young children for whom you deem them inappropriate.
1 Touch [Input].
The numeric keypad screen is displayed.
2 Touch the numeric keypad to input a 4-digit password.
The initial number is 1111.
Input number are displayed as “*”.
3 Touch [Enter] to memorize the number.
The Parental screen appears.
Set the rating level of PARENTAL
4 Touch [ ] of Parental to turn on.
5 Touch [ ] or [ ] of Parental Level to select the rating
level (1 to 8).
Select “OFF” to cancel the parental lock or if you do not
want to set a rating level. The smaller the number, the
higher the rating level.
6 Touch [
] to return to the previous screen.
Changing the password
4 Touch [Input] of Password Change.
The numeric keypad screen is displayed.
5 Touch the input screen to enter a new 4-digit password.
• Keep a note of the number somewhere safe in case you should
forget it.
6 Touch [Enter] to memorize the number.
7 Touch [
] to return to the previous screen.
Changing the rating level temporarily
Some discs may request that you change the rating level set in
the default settings during playback. In this case, the message
appears on the monitor screen “Parental level change OK? [Yes] /
[No].”
If this screen appears, change the level as follows:
• To change parental level and play, touch [Yes].
When [Yes] is touched, the numeric keypad input screen is
displayed. Input the 4-digit password in “Setting the Rating Level
(Parental Lock)” you set, then touch [Enter].
• To play without changing the parental level, touch [No].
(When [No] is touched, playback will be at the parental level set
in “Setting the Rating Level (Parental Lock).”)
Changing the Digital Output Setting
Use the following procedure to set the digital audio signal output from
the INA-W910R.
Setting item: Digital Out Mode
Setting contents: Auto / LPCM
Auto:
This function can help restrict the viewing of movies to children of
appropriate age levels only.
Setting item: Parental
Setting content: Input
• When the settings are changed, the old settings are overwritten.
Make a note of the current settings before making changes. The
memory is cleared when the vehicle’s battery is disconnected.
• On unrated DVDs, playback will not be restricted even if the rating
level is set.
• If you want to play back DVD software with the parental lock feature
and its use is currently restricted, change the rating level and the
country number in order to play back the DVD.
• Once set, this rating level remains in memory until changed. To
enable playback of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
LPCM:
The digital output is switched automatically
according to the type of audio signals being
played.
Be sure to select “Auto” when you want to
connect a digital audio processor and play Dolby
Digital audio. “Auto” is the factory setting.
The audio signals recorded on the disc are
converted to 48 kHz/16 bit (for DVDs) or 44.1 kHz
(for Video CDs and CDs) linear PCM audio
signals for output.
39-EN
Audio output/Optical digital audio output
Disc
Audio recording format
Digital output setting
(DVD SETUP)
Optical digital audio
output
Analog audio output
(Ai-NET, RCA output)
Format
Fs
Q
LPCM
(CD-DA,
DVD-V, DVD-A)
44.1/176.4kHz
16/20/24bit
AUTO or LPCM
44.1kHz, 16bit, LPCM
2ch (2ch Downmix)*
OK
48/96/192kHz
16/20/24bit
AUTO or LPCM
48kHz, 16bit, LPCM 2ch
(2ch Downmix)*
OK
PPCM
(DVD-A)
44.1/88.2/
176.4kHz
16/20/24bit
AUTO or LPCM
Not output
OK
48/96/192kHz
16/20/24bit
Dolby Digital
(-EX)
(DVD-V, DVD-A)
48kHz
16/18/20bit
LPCM
48kHz, 16bit, Decoded
2ch (2ch Downmix)*
OK
AUTO
Auto (Max 7.1ch)*
OK
DTS (-ES)
(CD-DA,
DVD-V, DVD-A)
44.1kHz
LPCM
44.1kHz, 16bit Decoded
2ch (2ch Downmix)*
OK
AUTO
Auto (Max 6.1ch)*
OK
LPCM
48kHz, 16bit, Decoded
2ch (2ch Downmix)*
OK
AUTO
Auto (Max 6.1ch)*
OK
LPCM
44.1kHz, 16bit,
Decoded 2ch*
OK
AUTO
Auto*
OK
LPCM
48kHz, 16bit, Decoded
2ch (2ch Downmix)*
OK
AUTO
Auto (Max 5.1ch)*
OK
LPCM
44.1kHz, 16bit,
Decoded 2ch*
OK
AUTO
Auto*
OK
LPCM
48kHz, 16bit, Decoded
2ch (2ch Downmix)*
OK
AUTO
Auto (Max 5.1ch)*
OK
48/96kHz
MPEG1Layer II
(VCD, DVD-V,
DVD-A)
44.1kHz
48kHz
MPEG2Layer II
(DVD-V, DVD-A)
44.1kHz
48kHz
MPEG1/2/
2.5Layer III
(MP3, WMA)
16/20/24bit
16/20/24bit
16bit
16bit
16bit
16bit
32kHz
16bit
AUTO or LPCM
32kHz, 16bit, Decoded
2ch
OK
44.1kHz
16bit
AUTO or LPCM
44.1kHz, 16bit,
Decoded 2ch
OK
48kHz
16bit
AUTO or LPCM
48kHz, 16bit, Decoded
2ch
OK
* Not output when playing back a DVD-Audio.
40-EN
Setting the Downmix Mode
This function applies to Dolby Digital, DTS stream sound.
Setting item: Downmix Mode
Setting contents: Surround / Stereo
Surround:
Stereo:
Surround compatible Downmix
Stereo Downmix
Setting the TV Screen
Setting of the Bonus Code
Some DVD-Audio discs include bonus group.
The 4 digit code for the bonus group can be memorized.
Refer to the information on the jacket, etc., of the disc, for the code
number.
Setting item: Bonus Code
Setting content: Code
1
Touch [Code].
The 10 key input screen is displayed.
Use the procedure described below to modify the output screen
according to the type of TV monitor (rear monitor) being used.
This setting can also be applied for the INA-W910R.
If the rear monitor is not connected, the screen setting is 16:9.
Setting item: TV Screen
Setting contents: 4:3 LB / 4:3 PS / 16:9
• For some discs, the picture may not be set to the selected screen size.
(For details, refer to the explanation on the disc’s jacket.)
4:3 LETTER BOX:
Select this when connected to a conventional 4:3 size (normal
TV aspect ratio) monitor. There may be black stripes visible at
the top and bottom of the screen (when playing a 16:9 size
movie). The width of these stripes will depend upon the original
aspect ratio of the theatrical release of the movie.
2
3
Input the 4 digit code number given on the jacket of
the disc, etc.
Touch [Enter] to memorize the number.
• If the code number of the bonus group differs from the code number
you set in this section, the 10 key input screen automatically appears
in the display. If a new code number is input, this code number will
be replaced.
Setting the DVD-Audio Playback Mode
To playback the DVD Audio Disc, you have a choice of 3 different
settings. If the disc containing DVD Video and Audio, set VCAP (Video
Capable Audio Player) or VOFF (Video OFF) to playback the DVD
Audio.
Setting item: DVD-A Setup
Setting contents: Video / VCAP / VOFF
Video:
VCAP:
VOFF:
4:3 PAN-SCAN:
Select this when connected to a conventional 4:3 size monitor.
The picture will fill the entire TV screen. However, due to the
mismatch in aspect ratio, parts of the movie at the extreme left
and right sides will not be visible (when playing a 16:9 size
movie).
Only DVD Video is played back if the disc contains
DVD Video and Audio.
DVD Audio is played back with Video.
DVD Audio is played back without Video.
Playing MP3/WMA/AAC Data
(File Play Mode)
When using discs containing both audio data and MP3/WMA/AAC
data.
Setting item: File Play Mode
Setting contents: CD / CMPM
Plays only the audio data on discs containing both audio
data and MP3/WMA/AAC data.
CMPM: Plays only the MP3/WMA/AAC files on discs containing
both audio data and MP3/WMA/AAC data.
CD:
16:9 WIDE:
Select this when connected to a wide screen TV. This is the
factory setting.
• If a disc is inserted, remove it from this unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.
41-EN
Setting the compressed File Playback Data
If a disc containing both a compressed video file and a compressed
audio file is used, you have a choose to play back only a video or only
audio.
Source Setup
Source Setup Operation
Setting item: DVD Play Mode
Setting contents: Video / Audio
Video:
Audio:
Only Video data is played back.
Only Audio data is played back.
The Parking Brake must be engaged to access the Source
mode screen. Attempting to access this screen while driving
will display the warning-Can’t operate while driving.
Displaying DivX Disc Information
Setting item: DivX Info.
Further setting items: Registration / Deregistration *
The following steps 1 to 6 are common operations to each
“Setting item” of Source Setup. Refer to each section for details.
By touching the title bar of Registration or Deregistration, the
DivX® registration or deregistration code is displayed.
1
* Displayed only when this unit is already registered.
2
Setting the Video CD Play Mode
When playing a Playback Control (PBC) enabled Video CD, you can
choose to set PBC ON or OFF.
Setting item: PBC
Setting contents: OFF / ON
OFF:
ON:
The PBC menu is not displayed.
The PBC menu is displayed.
Press SOURCE/
on the unit.
The Source Select screen is displayed.
Touch [
] on the main source screen.
The Setup Select screen is displayed.
3
Touch [
] of Source Setup.
The Source Setup screen appears.
4
Touch [
] of your desired Setup mode.
DVD Setup*1 / Radio Setup / BLUETOOTH Setup*3 /
RDS Setup*2 / USB Search*4
*1 Refer to “DVD Setup” on page 38.
*2 Refer to “RDS Operation” on page 21.
*3 Displayed when“BLUETOOTH IN” is set to ON (page 49).
*4 You can directly touch [ ] or [ ] to change this item.
5
Touch [ ], [ ] or [
change its setting.
], etc. of the desired item to
Radio Setup:
FM Level / PI Seek / RDS Regional / PTY Language / PTY31 /
Tuner Condition
BLUETOOTH Setup:
Paired Devices / Device Search / Clear Device / Service Provider /
Visible Mode / Auto Answer / Speaker Select / MIC Input /
Firmware Version / Firmware Update / Hung Up / Echo Cancel /
Navi Voice IN Call / BT Menu Language / Shortcut Memory
USB Search:
Tag/File Name
• For BLUETOOTH Setup details, refer to “BLUETOOTH Setup”
(page 62).
6
Touch [
] to return to the previous screen.
Touch [Exit] to return to the main source screen that was
displayed before the setup operation was started.
42-EN
Radio Setup
“Radio Setup” is selected on the source setup main menu in step 4.
Adjusting Source Signal Levels
If the difference in volume level between the CD and FM radio is
too great, adjust the FM signal level as follows.
Setting item: FM Level
Setting contents: Low / High
USB Search
“USB Search” is selected on the source setup main menu in step 4.
Setting the USB Search Mode
The unit allows you to search for the USB Audio files by Tag
information or Explorer (File Name) mode.
Setting item: USB Search
Setting contents: Tag / File Name
When Tag is selected, you can use Playlists/Artists/
Albums/Songs/Genres/Composers/Folders/Files
search mode to narrow searches.
File Name: When File Name is selected, you can search a
folder/file as search files on PC.
Tag:
PI Seek Setting
Setting item: PI Seek
Setting contents: OFF / Auto
Receiving RDS Regional (Local) Stations
When OFF is selected, the unit automatically keeps receiving the
related local RDS station.
Setting item: RDS Regional
Setting contents: OFF / ON
• After the above setting, turn the ignition key off (ACC OFF) and on
again (ACC ON).
• For search mode details, refer to “Searching for a desired Song”
(page 74).
• When a portable audio player is connected, even though File Name is
set, the Tag information search mode will be applied.
Switching the Display Language of PTY (Programme Type)
You can select one of the patterns of the display languages.
Setting item: PTY Language
Setting contents: GB / NL / F / D / I / E
Setting PTY31 (Emergency Broadcast) Reception
PTY31 (Emergency Broadcast) reception can be set to ON/OFF.
Setting item: PTY31
Setting contents: OFF / ON
• The unit automatically gives priority to an Emergency Broadcast
whenever it begins, and interrupts the programme you are currently
listening to when PTY31 is set to ON.
• The unit will show “Alarm” in the display during PTY31 reception.
Setting the TUNER (FM) tone quality (Tuner Condition)
This unit can set your preferred tone quality for FM radio source.
Setting item: Tuner Condition
Setting contents: Normal / HiFi / Stable
Normal: Standard setting
HiFi:
High-quality setting
Stable: Control noise
• Noise may be more noticeable when HiFi is set, depending on the
reception status. In this case, the Normal setting is recommended.
43-EN
Adjusting Image Brilliance (Live Contrast)
Display Setup
The over brightness/darkness part of image will be adjusted to a
proper brilliance automatically.
Setting item: Live Contrast
Setting contents: OFF / Low / High
Display Setup Operation
The Parking Brake must be engaged to access the Display mode
screen. Attempting to access this screen while driving will display
the warning-Can’t operate while driving.
• You can adjust this setting in visual source mode by touching [
directly. (In this case, the “Live Contrast” is displayed as
“Contrast”.)
]
Selecting the Visual EQ Mode (Factory’s setting)
You can select a mode suitable for the subject image.
The following steps 1 to 5 are common operations to each
“Setting item” of Display Setup. Refer to each section for
details.
1
Press SOURCE/
OFF:
Night M.:
on the unit.
The Source Select screen is displayed.
2
Touch [
Soft:
Sharp:
] on the main source screen.
The Setup Select screen is displayed.
3
Touch [
Contrast:
P-1:
] of Display Setup.
The Display Setup screen appears.
4
Touch [ ], [ ] or [
change its setting.
Further setting item: Visual EQ
Setting contents: OFF (Initial setting) / Night M. / Soft / Sharp /
Contrast / P-1 / P-2
P-2:
] etc., of the desired item to
Initial Setting
Suitable for movies in which dark scenes
frequently appear.
Suitable for CGs and animated films.
Suitable for old movies where images are not
clearly shown.
Suitable for recent movies.
Recalls the Visual EQ mode being stored on
preset No.P-1 from “Storing Visual EQ” (page 45).
Recalls the Visual EQ mode being saved on
preset No.P-2 from “Storing Visual EQ” (page 45).
Setting items:
Visual EQ / Dimmer / Dimmer Low Level / Function Guide Fade /
Base Color / Screen Alignment / Display
• To return to the default video settings, set this function to OFF. Any
Visual EQ selection or changes made are reset their initial settings.
• If any adjustments are made to the existing Visual EQ selections
(Night M., etc.), “Custom” is displayed.
5
Adjusting Brightness
Touch [
] to return to the previous screen.
Touch [Exit] to return to the main source screen that was
displayed before the setup operation was started.
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Visual EQ Setting Operation
The visual setting of Bright, colour, contrast, etc. can be adjusted in this
mode.
Setting item: Visual EQ
Further setting items:
Live Contrast*
Visual EQ*
Bright
Contrast
Sharp*
User Memory*
You can adjust the brightness between Min (-15) and Max (+15).
When it reaches the minimum or maximum point, the display
shows “Min” or “Max” respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car’s interior lighting as
long as Auto is set in “Setting the Brightness of the Backlighting”
(page 45).
Adjusting Colour of Picture
Color*
Tint*
* The setting is unavailable in navigation mode.
Touch [ ] or [ ] etc., of the desired item to change its
setting.
• The settings are available in the visual source mode only.
• The further setting items can be changed by touching [ ]/[ ].
• Only one setting item can be displayed on each page, you can select
the desired brightness, picture tint, etc through the screen displayed.
44-EN
Further setting item: Bright
Setting content: -15 ~ +15
Further setting item: Color
Setting content: -15 ~ +15
You can adjust the colour between Min (-15) and Max (+15).
When it reaches the minimum or maximum point, the display
shows “Min” or “Max” respectively.
• Colour adjustment can be made only in the iPod video, DVD, Video
CD, AUX modes.
Adjusting Tint of Picture
Adjusting the Minimum Level of Backlight
Further setting item: Tint
Setting content: G15 ~ R15
You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
travelling at night.
Adjust the colour from G15 to R15. “G Max” or “R Max” is
displayed at the maximum of each colour.
Setting item: Dimmer Low Level
Setting content: -15 to +15
• Tint adjustment can be made only in the iPod video, AUX modes.
• When the picture from the external input is set to PAL, you cannot
adjust the Tint.
You can adjust the level between Min (-15) and Max (+15). When
it reaches the minimum or maximum point, the display shows
“Min” or “Max” respectively.
Adjusting Image Contrast
Further setting item: Contrast
Setting content: -15 to +15
Setting the Function Guide display ON/OFF
Contrast adjustment range is -15 to +15. “Low” and “High”
appear as the minimum and maximum values specified.
When on is set, the function guide will be hidden automatically after no
operation is performed for 5 seconds.
Adjusting Picture Quality
Setting item: Function Guide Fade
Setting contents: OFF / ON
Further setting item: Sharp
Setting content: -5 to +5
Switching the Font Back Display Colour
Picture quality adjustment range is -5 to +5. “Soft” and “Hard”
appear as the minimum and maximum values specified.
You can choose from 4 different display colors for the font back.
• Picture quality adjustment can be made only in the iPod video, DVD,
Video CD, AUX modes.
Setting item: Base Color
Setting contents: Blue / Red / Green / Amber
Storing Visual EQ
You can store the settings made for “Adjusting Image
Brightness, Tint, Depth, Picture Quality and Contrast.”
Adjusting the Touch Panel
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Further setting item: User Memory
Setting contents: P-1 / P-2
1 After completing “Adjusting Brightness, Tint, Depth,
Picture Quality, and Contrast” (page 44), touch [ ] or [
of User Memory and then select preset No.
“P-1” or “P-2” to which the settings are to be stored.
2 After selecting a preset No., touch [Memory].
The adjusted Visual EQ mode is stored by the above
operations.
]
• You can recall the Visual EQ mode stored here from P-1 or P-2 of
“Selecting the Visual EQ Mode (Factory’s setting)” (page 44).
Setting the Brightness of the Backlighting
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting contents: OFF / ON / Auto
OFF:
ON:
Auto:
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
Keep the background illumination of the monitor dark.
Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
• When ON or Auto is set, the setting is also applied for the button
lighting in “Adjusting the Dimmer of Button Lighting at Night”
(page 46).
Setting item: Screen Alignment
Setting contents:
/ Reset
1 Touch [
] of Screen Alignment.
The adjustment screen appears.
2 Accurately touch the
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the Display
setup mode screen.
• If you have touched a location other than the
mark, touch [Reset]
to restore the adjustment screen to the initial setting.
• If you touch [
] on the adjustment screen, no adjustment is done
and the Display Setup screen is restored.
Display On and Off
You can turn off the screen display to reduce power consumption.
This additional power enhances the sound quality.
Setting item: Display
Setting contents: OFF / ON
• If any button on the unit is pressed during display off mode, the
screen will be displayed for 5 seconds to show the operation before
returning to display off mode.
45-EN
General Setup
Sound (Beep) Guide Function
Setting item: Beep
Setting contents: OFF / ON
General Setup Operation
The Parking Brake must be engaged to access the General mode
screen. Attempting to access this screen while driving will display
the warning-Can’t operate while driving.
ON: Activate the Sound Guide mode.
OFF: Deactivate the Sound Guide mode. The sound guide
beep will not be produced when a button is pressed/
touched.
• This setting is unavailable for the navigation mode.
Setting the Scroll
The following steps 1 to 5 are common operations to each
“Setting item” of General Setup. Refer to each section for
details.
1
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
Touch [
] on the main source screen.
The Setup Select screen is displayed.
3
Touch [
] of General Setup.
The General Setup screen appears.
4
Touch [ ] or [ ] of the desired item to change its
setting.
Setting items:
Clock / Demonstration / Beep / Auto Scroll / Language Sel. /
Key Dimmer Level / Security Code
5
Touch [
] to return to the previous screen.
Touch [Exit] to return to the main source screen that was
Scroll display is available if CD text, folder name, file name or tag
information is entered.
Setting item: Auto Scroll
Setting contents: OFF / ON
OFF: Turns off the Auto scroll mode. Scroll display is done
once as a track is changed.
ON: Turns on the Auto scroll mode. Scroll display is repeated
as long as the mode is turned on.
• The display scrolls on the unit when the screen is filled up.
• Song, artist and album name, etc. scrolls when an iPod/iPhone is
connected.
Changing the Language Font
Four types of font can be selected.
Setting item: Language Sel.
Setting contents: Mode1 / Mode2 / Mode3 / Mode4
Mode1:
Mode2:
displayed before the setup operation was started.
• Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Displaying the Time
The clock indication on the monitor display is turned on or off
respectively.
Setting item: Clock
Setting contents: OFF / ON
• The clock of the unit will be automatically updated according to the
data that the Navigation System provides, and cannot be adjusted
manually.
• If the GPS antenna is not connected correctly, the clock indication on
the unit may be wrong because the time information cannot be
received. In this case, it is suggested to set “Clock” to “OFF”.
Demonstration Function
This unit is equipped with a demonstration function capable of showing
basic operations of respective sources on the monitor display.
Setting item: Demonstration
Setting contents: OFF / ON
Turns on the demonstration mode to show the basic
operations.
OFF: Turns off the demonstration mode.
ON:
• The demonstration operation is automatically repeated until the
function is turned off.
46-EN
Mode3:
Mode4:
Normal Font Display (ISO8859-1).
Russian Font Display (WINDOWS-1251)
You cannot use this font for display in RDS, Tuner
mode.
European Font Display (WINDOWS-1252)
Hebrew Font Display
Adjusting the Dimmer of Button Lighting at
Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: Key Dimmer Level
Setting level: -2 to +2
Setting Security code
You can set the system to be unusable without entering a password.
When you set this setting to On and set a password, the password input
is required when the system is connected to a battery and turned on for
the first time.
Setting item: Security code
Setting contents: On / Off
System Setup
System Setup Operation
Setting the password
The Parking Brake must be engaged to access the System mode
screen. Attempting to access this screen while driving will display
the warning-Can’t operate while driving.
1
2
The following steps 1 to 5 are common operations to each
“Setting item” of System Setup. Refer to each section for details.
Touch [On].
After the confirmation message appears, touch
[Yes].
The password setting screen is displayed.
3
1
Press SOURCE/
on the unit.
The Source Select screen is displayed.
Enter a password, then touch [OK].
2
Touch [
] on the main source screen.
The Setup Select screen is displayed.
3
Touch [
] of System Setup.
The System Setup screen appears.
4
• Enter the 6-digit number.
• Input numbers are displayed as “*”.
4
Enter the same password again, then touch [OK].
The password is set and the system returns to the General
Setup screen.
• If you forget a registered password, you can not use this unit. In this
case, service will be required.
Clearing the password
1
Setting items:
Remote Sensor* / Camera IN / AUX1 IN / AUX2 IN / AUX Out /
BLUETOOTH IN / Optical Out / Speed Pulse / Rear Source*
* When ON is set in “Setting the Picture Output” (page 49), the item is
displayed.
5
Touch [
] to return to the previous screen.
Touch [Exit] to return to the main source screen that was
displayed before the setup operation was started.
• Immediately after changing the settings of System Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Touch [Off].
The password setting screen is displayed.
2
Touch [ ] or [ ] etc., of the desired item to change
its setting.
Enter the password you have set, then touch [OK].
The password is cleared and the system returns to the
General Setup screen.
• Input numbers are displayed as “*”.
Switching the function of the remote
sensor
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
Setting item: Remote Sensor
Setting contents: Front / Rear
Front:
Rear:
The remote sensor of this unit is effective.
The remote sensor of the external monitor
connected to AUX OUT of this unit becomes
effective. The remote control operates the
source connected to the AUX OUT terminals.
• When an optional DVD changer or DVD player is connected, and the
remote control sensor is set to Rear, some onscreen button operations
([ ] Stop, etc.) cannot be performed. In this case, set the remote
control sensor to Front.
47-EN
Selecting the camera
Setting the Camera Input
With an optional camera connected, view video is output to the monitor.
Depending on the connected camera, set this item to “Direct” or
“RCA”. For detailed information of the optional camera, refer to the
table on page 48.
Setting item: Camera IN
Setting contents: OFF / Direct / RCA
OFF:
Direct:
RCA:
The Camera mode can not be used.
Use when the optional direct camera is connected.
Used when connecting to an optional camera with
RCA output connector.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
Depending on the connected camera, set this item to “Topview”,
“Front” or “Rear”.
Setting item: Camera Select
Setting contents: Topview *1 / Front / Rear
About the setting information of the optional Alpine camera, refer
to the table below.
Direct Camera
RCA Camera*2
Front
HCE-C200F*3
—
Rear
HCE-C300R
HCE-C117D
HCE-C200R*3
HCE-C115
The video input signal type can be chosen.
*1 This setting item is prepared for the Alpine Topview camera.
This setting item is displayed only when Camera IN is set to RCA,
refer to page 48.
2 Any front or rear camera which has the RCA video output can also
*
be connected to this unit.
*3 If both front camera HCE-C200F and rear camera HCE-C200R are
connected, please set “Camera IN” to “RCA” and “Camera Select”
to “Rear”.
Further Setting item: Camera Signal
Setting contents: NTSC/PAL / Auto
Turning View Change Function ON/OFF
After setting this item to Direct or RCA, touch [
following further setting items can be adjusted.
] of Camera IN, the
Setting the Rear Camera Signal Input
NTSC/PAL: Choose the video input signal type manually.
Auto:
The suitable video input signal type will be
automatically chosen between NTSC and PAL.
• When set to Auto, unstable display may occur while playing back
certain black and white video signal. In this case, select NTSC or
PAL mode manually.
Depending on the connected camera, the view angle of camera
may be changed.
When a camera with View Change Function is connected, set
this item to ON.
Setting item: View Change Func.
• Displayed only when Camera IN is set to Direct and the Rear
Camera is selected, refer to page 48.
Rear camera guide line display setting
You can set whether the rear camera guide line is displayed or
not.
Setting item: AUX1 IN
Setting contents: OFF / ON
Further Setting item: Guide Line
Setting contents: OFF/ON
OFF:
ON:
Adjusting the Rear Camera Guide line
You can adjust the rear camera guide line position.
Further Setting item: Guide Line Adjustment
1
Touch [
] of Guide Line Adjustment.
The guide line adjustment screen is displayed.
2
Setting the AUX Mode
Touch the guide pylon you intend to adjust.
AUX1 source is not displayed.
AUX1 source is displayed.
• When OFF is selected, the settings related to AUX1 cannot be
changed from this unit.
• OFF is not displayed when the optional DVD player or DVD changer
is connected via Ai-Net. And the setting related AUX1 can not be
adjusted.
After setting this item to ON, touch [
further setting items can be adjusted.
] of AUX1 IN, the following
Adjusting the AUX1 name Mode
Further Setting items: Primary / Secondary*1
Setting contents: OFF*2 / AUX*3 / DVD / Game / TV / DVB-T /
EXT.DVD / DVD CHG / USB Video
3
*1 When a USB Video box or TUE-T200DVB (both are sold separately
and cannot be connected at the same time) is connected, you can use
it to connect one more External Input device. Setting the Secondary
name can change the source name display of this device.
*2 The setting is only available for Secondary.
*3 The setting is only available for Primary.
Touch [ ], [ ], [
the guide.
] or [
] to adjust the position of
After moving the guide, when you touch [
the horizontal row are aligned in a row.
4
], the guides in
After the adjustment is completed, touch [OK].
You can touch [Reset] during adjustment to return to the
default adjustment.
48-EN
• You can set Secondary name only when Primary name is set to
DVB-T (or USB Video). And you cannot set the same name as in
Primary name.
• The selected name is displayed on the Visual and Rear selection
screen.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
Setting item: AUX2 IN
Setting contents: iPod Video / AUX
iPod Video: Set when a video compatible iPod or an iPhone is
connected to the iPod (V)/AUX Input Connector.
AUX:
Set when an optional AV/RCA interface cable
(4-pole mini AV plug to 3-RCA) is connected. A DVD
player etc., with RCA audio/video output can be
connected to this unit. In this case, the iPod video
will not be displayed.
• When the current source is iPod video, this setting cannot be
adjusted.
Touch [
] of AUX1 IN or AUX2 IN, the following further setting
items can be adjusted.
Adjusting the External Input Audio Level
Further Setting item: Level
Setting contents: Low / High
Low:
High:
Decreases the external input audio level.
Increases the external input audio level.
• For AUX1, this setting item is adjustable only when AUX1 IN is set to
ON.
• For AUX2, this setting item is adjustable only when AUX2 IN is set to
AUX.
Switching the Visual Input Signal System
Further Setting item: Signal
Setting contents: NTSC/PAL / Auto
• The video input type can be changed.
• When set to Auto, unstable display may occur while playing back
certain black and white video signal. In this case, select NTSC or
PAL mode manually.
• For AUX1, this setting item is adjustable only when AUX1 IN is set to
ON.
• For AUX2, this setting item is adjustable only when AUX2 IN is set to
AUX.
Setting the Digital Output
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Setting item: Optical Out
Setting contents: OFF / ON
• Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
Setting Speed pulse type
You can set the vehicle speed pulse division setting. When you set to
Type 2, the vehicle speed pulse divider is enabled. Usually, you do not
need to change this setting.
Setting item: Speed Pulse
Setting contents: Type1 / Type2
Setting the Rear Entertainment System
The rear entertainment function independently routes different sources
to the front and the rear inside a car. For example, while listening to the
radio or other audio source in the front, DVD can be enjoyed in the rear
with the optional rear monitor and headphones.
Setting item: Rear Source
Setting contents: OFF / Disc / iPod / AUX / Game / DVD / TV /
DVB-T / EXT.DVD / DVD CHG / USB Video /
AUX2
• Select OFF to cancel the rear entertainment mode.
• The display of setting contents may vary depending on the setting
and connected device.
Setting the Picture Output
Outputs the picture of the source selected on the INA-W910R
connected to the rear monitor.
Setting item: AUX Out
Setting contents: OFF/ON
OFF: The “Remote Sensor” and “Rear Source” items are not
displayed on the System Setup screen.
ON: The “Remote Sensor” and “Rear Source” items are
displayed on the System Setup screen.
Setting the BLUETOOTH Connection
(BLUETOOTH IN)
Setting item: BLUETOOTH IN
Setting contents: OFF / ON
OFF:
ON:
BLUETOOTH function is not used.
Select when you would like to pair your
BLUETOOTH compatible phone with this unit.
• For details on BLUETOOTH operation, refer to “BT Hands Free
Calling” (page 61).
• If mobile phone compatible with the Voice-Dial function is
connected, the Voice-Dial function can be used.
49-EN
IMPRINT Operation
(Optional)
Alpine introduces IMPRINT - the world’s first technology that
thoroughly eliminates in-car acoustic problems that normally degrade
sound quality, which enables us to experience music the way the artist
intended.
When the IMPRINT audio processor (PXA-H100) (sold separately) is
connected to this unit, MultEQ and the following sound adjustment can
be performed.
Adjusting Sound Setting in Manual Mode
You can change these sound settings to create your own preference
when the MultEQ mode is set to OFF (Manual Mode).
Use steps 1 to 6 to select one of the Sound menu
modes to modify. See the applicable section below for
details about the selected item.
1
2
Check whether the Defeat mode is off.
Press SOURCE/
on the unit.
The Source Select screen is displayed.
The Parking Brake must be engaged to access the IMPRINT
mode screen. Otherwise, some functions are not adjustable.
3
MultEQ, developed by Audyssey Labs, automatically corrects the audio
for the listening environment. The system is optimized for selected
positions in the vehicle. To accomplish this, MultEQ must take
measurements of the vehicles response characteristics. For details on the
set up procedure, consult your authorized Alpine dealer.
1
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
3
4
] on the source selection screen.
The Setup Select screen is displayed.
4
Changing MultEQ mode
Touch [
Touch [
] of Audio Setup.
The Audio Setup screen appears.
5
Touch [
] of A.Processor.
The A.Processor list screen appears.
6
Touch [ ], [ ] or [
change its setting.
], etc., of the desired item to
Setting items : Media Xpander / X-Over / Time Correction /
T.Corr Parameter / G-EQ / P-EQ / F-EQ /
TW SETUP *
The Setup Select screen is displayed.
* This function can be operable only when PXA-H100 (sold
separately) is connected and 2.2ch (3WAY) mode is set. For details,
refer to the Owner’s Manual of PXA-H100.
After touching [ ] to display the IMPRINT Setup
adjusting item, touch [
] of IMPRINT Setup, the
MultEQ mode selection screen will be displayed.
• Touching [Exit] will change to the main source screen.
• Touching [
] to return to the previous screen.
• Media Xpander, F-EQ, P-EQ and G-EQ Adjustment are inoperable
when Defeat is set to ON.
Touch [
] on the main source screen.
Touch [ ] or [ ] to change the setting.
Setting range : OFF (Manual Mode) / Curve1 (MultEQ-1) / Curve2
(MultEQ-2)
• The Curve mode can be selected only when Curve 1 and Curve 2 are
stored.
• When MultEQ is set to Curve 1 or 2, Media Xpander, X-Over, Time
Correction, T.Corr Parameter, Subwoofer Phase, Subwoofer
Channel, P-EQ, G-EQ, F-EQ and TW Setup are set automatically.
They are no longer user adjustable.
Setting the MX Level (Media Xpander)
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The CD, DVD, USB Memory and iPod/
iPhone, will be able to reproduce the music clearly even in cars with a
lot of road noise.
Setting item : Media Xpander
1
Touch [ ] or [ ] of Media Xpander to select ON or
OFF.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
2
Touch [
] of Media Xpander after setting to ON.
The Media Xpander setup screen appears.
50-EN
3
Touch [ ] or [ ] of the desired MX mode.
4
Adjust the crossover to your preference.
• Music source (such as CDs, iPod, etc.) level can be set.
Selecting the Cut-Off Frequency
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
Touch [ ] or [ ] of Freq., then select the cut-off frequency
(crossover point).
The adjustable bandwidth differs depending on the speaker
(channel).
MX CMPM (OFF, CMPM MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
4.2ch (FRONT/REAR/SUBW.) System
Setting contents:
Low (SUB-W)
Mid (REAR)
High (FRONT)
MX DVD (OFF, Movie MX 1 to 2)
The dialogue portion of the video is reproduced more clearly.
(DVD Music)
This disc contains a large quantity of data such as music clip.
MX uses this data to reproduce the sound accurately.
Adjusting the Slope
Touch [ ] or [ ] of Slope, then adjust the HPF or LPF slope.
Adjustable slope: FLAT, –6 dB/oct., –12 dB/oct., –18 dB/oct.,
–24 dB/oct.
MX AUX (OFF, CMPM MX, Movie MX, Music MX)
Choose the MX mode (CMPM, Music, or Movie) that
corresponds to the media connected.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as CD, and MP3 can have its own MX
setting.
• MX mode does not function when MX is ON for FM, MW, LW radio.
• MX CMPM is applied for MP3/WMA/AAC and iPod/iPhone.
• The MX setting can be performed only when a source is currently
selected.
• This function is inoperable when Defeat is set to ON.
20 Hz~200 Hz
20 Hz~200 Hz
20 Hz~200 Hz
Adjusting the Level
Touch [ ] or [ ] of Level, then adjust the HPF or LPF level.
Adjustable output level: -12 to 0 dB.
5
Repeat steps 3 to 4 to make adjustment to the other
bands.
2.2ch (3WAY) System
Adjusting the Crossover Settings (X-Over)
2.2ch (3WAY) System / (L+R)
Before performing the following procedures, refer to “About the
Crossover” (page 55).
Setting contents:
Low / Mid-L / Mid-H / High
Setting item : X-Over
2.2ch (3WAY) System / (L/R)
1
L/R:
L+R:
2
3
Setting contents:
Low-L / Low-R / Mid-L-L / Mid-L-R / Mid-H-L /
Mid-H-R / High-L / High-R
Touch [ ] or [ ] of X-Over to select L/R or L+R.
Different adjustment values can be set for the left and
right channels.
Sets the same adjustment values for the left and right
channels.
Touch [
] of X-Over.
A speaker list on the X-OVER screen is displayed.
Touch [
] of the band to be adjusted.
The screen changes to the X-Over screen to be adjusted.
4.2ch (FRONT/REAR/SUBW.) System
4.2ch (FRONT/REAR/SUBW.) System / (L+R)
Setting contents:
Low (SUB-W) / Mid (REAR) / High (FRONT)
4.2ch (FRONT/REAR/SUBW.) System / (L/R)
Setting contents:
Low (SUB-W)-L / Low (SUB-W)-R / Mid (REAR)-L /
Mid (REAR)-R / High (FRONT)-L / High (FRONT)-R
4
Adjust the crossover to your preference.
Selecting the Cut-Off Frequency
Touch [ ] or [ ] of Freq., then select the cut-off frequency
(crossover point).
The adjustable bandwidth differs depending on the speaker
(channel).
2.2ch (3WAY) System
Setting contents:
Low / Mid-L 20 Hz~200 Hz
Mid-H
20 Hz~20 kHz
High
(1 kHz~20 kHz)*1/(20 Hz~20 kHz)*2
*1 When Factory’s is selected, refer to “Setting the Response Slope for
the High Range Speaker (TW Setup)” (page 53).
*2 When User’s is selected, refer to “Setting the Response Slope for the
High Range Speaker (TW Setup)” (page 53).
51-EN
Adjusting the Level
Touch [ ] or [ ] of Level, then adjust the HPF or LPF level.
Adjustable output level: –12 to 0 dB.
Adjusting the Slope
Touch [ ] or [ ] of Slope, then adjust the HPF or LPF slope.
Adjustable slope: FLAT*, –6 dB/oct., –12 dB/oct., –18 dB/oct.,
–24 dB/oct.
* FLAT can be set for the HIGH slope only when User’s is selected in
“Setting the Response Slope for the High Range Speaker (TW
Setup)” (page 53). Depending on the response characteristics of the
speaker, care should be taken when setting the response slope to
FLAT, as speaker damage may result. With this unit, a message is
displayed when the response slope for the high range speaker is set
to FLAT.
5
Repeat steps 3 to 4 to make adjustment to the other
bands.
• While adjusting the X-Over, you should consider the frequency
response of the connected speakers.
• About the 2.2ch (3WAY)/4.2ch (FRONT/REAR/SUBW.) system,
you can switch the system mode with the 2.2ch (3WAY)/4.2ch
(FRONT/REAR/SUBW.) switch on the PXA-H100. For details, refer
to the Owner’s Manual of PXA-H100.
Adjusting the Time Correction
Before performing the following procedures, refer to “About Time
Correction” (page 54).
Setting item : Time Correction
1
Touch [
] of Time Correction.
The Time Correction adjustment screen appears.
2
Touch [ ] or [ ] of the desired speaker to adjust
the distance.
L = (distance to farthest speaker) – (distance to other
speakers)
3
Graphic Equalizer Adjustments (G-EQ)
You can modify the equalizer settings to create a response curve more
appealing to your personal taste.
Setting item : G-EQ
1
Select L+R by touching [ ] of G-EQ.
L+R:
Sets the same adjustment values for the left and right
channels.
When Parametric EQ is adjusted, this setting will be turned
OFF.
2
Touch [
] of G-EQ after selecting L+R.
The G-EQ list screen appears.
3
Adjust the G-EQ to your preference.
Selecting the Band
Touch [ ] or [ ] of Band to select the band to be adjusted.
Band-1 (63 Hz) / Band-2 (150 Hz) / Band-3 (400 Hz) /
Band-4 (1 kHz) / Band-5 (2.5 kHz) / Band-6 (6.3 kHz) /
Band-7 (17.5 kHz)
Adjusting the Level
Touch [ ] or [ ] of Level to adjust the level of selected
band.
Adjustable output level: –6 to +6 dB
4
To adjust another band, repeat step 3, and then
adjust all bands.
• When Graphic EQ is adjusted, the adjustment for Parametric EQ
becomes ineffective.
Adjusting the Parametric Equalizer Curve
(P-EQ)
Refer to “Time Correction Value List” on page 54.
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
Repeat step 2 to set another speaker.
Setting item : P-EQ
By setting these values to make its sound reach the
listening position at the same time as the sound of other
speakers.
1
L+R:
Setting the Time Correction Unit
(T.Corr Parameter)
You can change the unit, (cm or inch) of time correction.
Touch [
] or [
] of T.Corr Parameter to select cm or Inch.
Setting item: T.Corr Parameter
Setting contents: cm / Inch
cm:
Inch:
Time correction value is in cm.
Time correction value is in inches.
Select L+R by touching [ ] of P-EQ.
Sets the same adjustment values for the left and right
channels.
When Graphic EQ is adjusted, this setting will be turned
OFF.
2
Touch [
] of P-EQ after selecting L+R.
The P-EQ list screen appears.
3
Adjust the P-EQ to your preference.
Selecting the Band
Touch [ ] or [ ] of Band to select the band to be adjusted.
Band 1 / Band 2 / Band 3 / Band 4 / Band 5
52-EN
Adjusting the Frequency
Touch [ ] or [ ] of Freq. to adjust the frequency of the
selected band.
Adjustable frequency bands: 20 Hz to 20 kHz (in 1/3 octave steps)
Band-1: 20 Hz~80 Hz (63 Hz)
Band-2: 50 Hz~200 Hz (150 Hz)
Band-3: 125 Hz~3.2 kHz (400 Hz)
Band-4: 315 Hz~8 kHz (1 kHz)
Band-5: 800 Hz~20 kHz (2.5 kHz)
Adjusting the Level
Touch [
band.
Setting the Response Slope for the High
Range Speaker (TW Setup)
Depending on the response characteristics of the speaker, care should be
taken when setting the response slope of the high range speaker to
FLAT in 2.2ch (3WAY) mode (see “Adjusting the Crossover Settings
(X-Over)” on page 51), as speaker damage may result.
Setting item: TW Setup
Touch [ ] or [ ] of TW Setup to select Factory’s or
User’s.
] or [ ] of Level to adjust the level of selected
Factory’s: As protection from possible speaker damage, FLAT
cannot be set for the response slope of the high range
speaker in 2.2ch (3WAY) mode.
User’s: The FLAT setting is possible in 2.2ch (3WAY) mode.
Adjustable level: –6 to +6 dB
Setting the Bandwidth
Touch [
] or [ ] of Q to select the bandwidth.
Adjustable bandwidth: 1, 1.5, 3
4
To adjust another band, repeat step 3 and adjust all
bands.
• When the Parametric EQ is adjusted, the adjustment for Graphic EQ
becomes ineffective.
• The frequencies of adjacent bands cannot be adjusted within 4 steps.
• While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
Equalizer Presets (F-EQ)
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
Setting contents: F-EQ
1
• Only if the 2.2ch (3WAY) switch is toggled between 4.2ch (FRONT/
REAR/SUBW.) and 2.2ch (3WAY) on the IMPRINT audio processor
(PXA-H100), you can select the TW Setup mode.
Touch [
Storing Settings in the Memory
Adjustment or setting contents of X-Over, Time Correction and P-EQ,
etc. can be stored.
Contents that can be stored vary depends on the IMPRINT audio
processor used.
1
2
3
] of F-EQ.
The F-EQ list screen appears.
2
Touch [ ] or [ ] of the desired type to set to ON.
Flat / Pops / Rock / News / Jazz&Blues / Electrical Dance /
Hip Hop&Rap / Easy Listening / Country / Classical / User1 /
User2 / User3 / User4 / User5 / User6
• Only one type can be set to ON.
• By selecting User 1 to 6, you can recall the stored preset number in
“Graphic Equalizer Adjustments (G-EQ)” (page 52) or “Adjusting
the Parametric Equalizer Curve (P-EQ)” (page 52).
Check whether the Defeat mode is OFF.
Touch [MEMORY] on the A.Processor list display.
Within 5 seconds, touch any one of the preset
buttons [P.SET 1] through [P.SET 6] on the
A.Processor list screen.
The setting contents are stored.
• The stored contents will not be deleted even when the battery power
cord is detached.
• This operation cannot be performed when a typical equalizer setting
(e.g. pops) is selected in “Equalizer Presets (F-EQ)” (page 53).
Calling up the Preset Memory
1
2
Check whether the Defeat mode is OFF.
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] on the A.Processor list display to
select the preset memory.
• It takes a few moment to recall the preset memory.
53-EN
These values are the time correction values for the different
speakers. Setting these values to make each sound reach the
listening position at the same time as the sound of other speakers.
About Time Correction
The distance between the listener and the speakers in a car vary widely
due to the complex speaker placement. This difference in the distances
from the speakers to the listener creates a shift in the sounds image and
frequency characteristics. This is caused by the time delay between the
sound reaching the listener’s right versus the left ear.
To correct this, this unit is able to delay the audio signal to the speakers
closest to the listener. This effectively creates a perception of increased
distance for those speakers. The listener can be placed at an equal
distance between the left and right speakers for optimum staging.
The adjustment will be made for each speaker in 3.4cm steps.
Example 1. Listening Position: Front Left Seat
Adjust the time correction level of the front left speaker to a high value
and the rear right to zero or a low value.
5.1ms
0.5m
2.25m
The sound is not balanced because the distance between the
listening position and the various speakers is different.
The difference in distance between the front left speaker and the rear
right speaker is 1.75 m (68-7/8").
Here we calculate the time correction value for the front left speaker
in the diagram on the above.
Conditions:
Farthest Speaker – listening position : 2.25 m (88-9/16")
Front left speaker – listening position : 0.5 m (19-11/16")
Calculation: L = 2.25 m – 0.5 m = 1.75 m (68-7/8")
Time correction = 1.75 ÷ 343*1 × 1,000 = 5.1 (ms)
*1 Speed of sound: 343 m/s (765 mph) at 20°C
In other words, giving the front left speaker a time correction value of
5.1 ms makes it seem as if its distance from the listener is the same
as the distance to the farthest speaker.
Time correction eliminates the differences in the time required for the
sound to reach the listening position.
The time of the front left speaker is corrected by 5.1 ms so that its
sound reaches the listening position at the same time as the sound of
other speakers.
Example 2. Listening Position: All Seats
Adjust the time correction level of each speaker to almost the same level.
1
2
Sit in the listening position (driver’s seat, etc.) and
measure the distance (in meters) between your head
and the various speakers.
Calculate the difference between the distance
correction value to the farthest speaker and the
other speakers.
L = (distance to farthest speaker) – (distance to other
speakers)
54-EN
Time Correction Value List
Time
Delay
Distance Distance
Difference
(cm)
(inch)
Number
(ms)
Time
Delay
Distance Distance
Difference
(cm)
(inch)
Number
(ms)
1
0.0
0.0
0.0
51
5.0
170.0
67.0
2
0.1
3.4
1.3
52
5.1
173.4
68.3
3
0.2
6.8
2.7
53
5.2
176.8
69.7
4
0.3
10.2
4.0
54
5.3
180.2
71.0
5
0.4
13.6
5.4
55
5.4
183.6
72.4
6
0.5
17.0
6.7
56
5.5
187.0
73.7
7
0.6
20.4
8.0
57
5.6
190.4
75.0
8
0.7
23.8
9.4
58
5.7
193.8
76.4
9
0.8
27.2
10.7
59
5.8
197.2
77.7
10
0.9
30.6
12.1
60
5.9
200.6
79.1
11
1.0
34.0
13.4
61
6.0
204.0
80.4
12
1.1
37.4
14.7
62
6.1
207.4
81.7
13
1.2
40.8
16.1
63
6.2
210.8
83.1
14
1.3
44.2
17.4
64
6.3
214.2
84.4
15
1.4
47.6
18.8
65
6.4
217.6
85.8
16
1.5
51.0
20.1
66
6.5
221.0
87.1
17
1.6
54.4
21.4
67
6.6
224.4
88.4
18
1.7
57.8
22.8
68
6.7
227.8
89.8
19
1.8
61.2
24.1
69
6.8
231.2
91.1
20
1.9
64.6
25.5
70
6.9
234.6
92.5
21
2.0
68.0
26.8
71
7.0
238.0
93.8
22
2.1
71.4
28.1
72
7.1
241.4
95.1
23
2.2
74.8
29.5
73
7.2
244.8
96.5
24
2.3
78.2
30.8
74
7.3
248.2
97.8
25
2.4
81.6
32.2
75
7.4
251.6
99.2
26
2.5
85.0
33.5
76
7.5
255.0
100.5
27
2.6
88.4
34.8
77
7.6
258.4
101.8
28
2.7
91.8
36.2
78
7.7
261.8
103.2
29
2.8
95.2
37.5
79
7.8
265.2
104.5
30
2.9
98.6
38.9
80
7.9
268.6
105.9
31
3.0
102.0
40.2
81
8.0
272.0
107.2
32
3.1
105.4
41.5
82
8.1
275.4
108.5
33
3.2
108.8
42.9
83
8.2
278.8
109.9
34
3.3
112.2
44.2
84
8.3
282.2
111.2
35
3.4
115.6
45.6
85
8.4
285.6
112.6
36
3.5
119.0
46.9
86
8.5
289.0
113.9
37
3.6
122.4
48.2
87
8.6
292.4
115.2
38
3.7
125.8
49.6
88
8.7
295.8
116.6
39
3.8
129.2
50.9
89
8.8
299.2
117.9
40
3.9
132.6
52.3
90
8.9
302.6
119.3
41
4.0
136.0
53.6
91
9.0
306.0
120.6
42
4.1
139.4
54.9
92
9.1
309.4
121.9
43
4.2
142.8
56.3
93
9.2
312.8
123.3
44
4.3
146.2
57.6
94
9.3
316.2
124.6
45
4.4
149.6
59.0
95
9.4
319.6
126.0
46
4.5
153.0
60.3
96
9.5
323.0
127.3
47
4.6
156.4
61.6
97
9.6
326.4
128.6
48
4.7
159.8
63.0
98
9.7
329.8
130.0
49
4.8
163.2
64.3
99
9.8
333.2
131.3
50
4.9
166.6
65.7
100
9.9
336.6
132.7
Level adjusting
Output frequency range
(0 to –12 dB)
About the Crossover
Crossover (X-Over):
This unit is equipped with an active crossover. The crossover limits the
frequencies delivered to the outputs. Each channel is controlled
independently. Thus, each speaker pair can be driven by the frequencies
for which they have been optimally designed.
The crossover adjusts the HPF (high pass filter) or LPF (low pass filter)
of each band, and also the slope (how fast the filter rolls off the highs or
lows).
Adjustments should be made according to the reproduction
characteristics of the speakers. Depending on the speakers, a passive
network may not be necessary. If you are unsure about this point, please
consult your authorized Alpine dealer.
4.2ch (FRONT/REAR/SUBW.) mode
Cut-off frequency
(1/3 octave steps)
HPF
LPF
Low range
speaker
----
20 Hz 200 Hz
Rear high
range
speaker
20 Hz 200 Hz
----
Front high
range
speaker
20 Hz 200 Hz
----
Low range
Slope
Level
HPF
LPF
----
FLAT, 6,
12, 18,
24 dB/
oct.
FLAT, 6,
12, 18,
24 dB/oct.
FLAT, 6,
12, 18,
24 dB/oct.
----
----
0 to
–12 dB
0 to
–12 dB
0 to
Slope FLAT
Slope adjusting
20 Hz
(Different from actual display)
HPF cut-off LPF cut-off
frequency
frequency
• HPF (high pass filter): Cuts the lower frequencies and allows the
higher frequencies to pass.
• LPF (low pass filter): Cuts the higher frequencies and allows the
lower frequencies to pass.
• Slope: The level change (in dB) for a frequency change of one octave.
• The higher the slope value, the steeper the slope becomes.
• Adjust the slope to FLAT to bypass the HP or LP filters.
• Do not use a tweeter without the HPF on or set to a low frequency, as
it may cause damage to the speaker due to the low frequency content.
• You cannot adjust the crossover frequency higher than the HPF or
lower than the LPF.
• Adjustment should be made according to the recommended crossover
frequency of the connected speakers. Determine the recommended
crossover frequency of the speakers. Adjusting to a frequency range
outside that recommended may cause damage to the speakers.
For the recommended crossover frequencies of Alpine speakers, refer
to the respective Owner’s Manual.
We are not responsible for damage or malfunction of speakers caused
by using the crossover outside the recommended value.
–12 dB
High range
(Different from actual display)
2.2ch (3WAY) mode
Cut-off frequency
(1/3 octave steps)
HPF
LPF
Low
range
speaker
20 Hz 200 Hz
----
Mid range 20 Hz speaker
200 Hz
High
range
speaker
20 Hz 20 kHz
1 kHz 20 kHz,
(20 Hz ~
20 kHz)*
----
Slope
HPF
Level
LPF
FLAT, 6,
12, 18,
24 dB/oct.
FLAT, 6,
FLAT, 6,
12, 18,
12, 18,
24 dB/oct. 24 dB/oct.
----
FLAT*
6, 12, 18,
24 dB/oct.
----
0 to
–12 dB
0 to
–12 dB
0 to
–12 dB
* Only when selecting User’s in “Setting the Response Slope for the
High Range Speaker (TW Setup)” (page 53).
Low range
Mid range High range
(Different from actual display)
55-EN
External Audio Processor
Operation (Optional)
A compatible, external audio processor is operable from this unit when
connected. Some audio processors may require a wired controller. The
explanations below use the PXA-H700/PXA-H701 as an example.
Refer to the operating instructions of the audio processor for more
details.
• The adjustments or settings performed on the connected audio
processor cannot be operated properly from this unit.
• The setting “Setting the Speakers”, “Setting Bass Sound Control”,
and “Graphic Equalizer Adjustments” are not available if the MRAD550 is connected. Additionally, if the MRA-F350 is connected, the
following setting “Setting the MX mode” is not available. Also, the
setting content differs between the PXA-H700 and PXA-H701.
• This unit cannot be connected to the PXA-H510 and PXA-H900.
4
Adjusting the acoustic image (page 60)
5
Achieving powerful high volume sound
(page 60)
(Adjusting the acoustic image to achieve a sound as
if the centre speaker were directly in front of the
listener)
(Achieving energetic sound with even greater power,
like the sound in a movie theatre)
6
Adjusting the DVD Level (page 61)
(Adjust the volume (signal level) in the Dolby Digital,
Pro Logic II, DTS and PCM modes.)
The Parking Brake must be engaged to access the Audio
Processor mode screen. Attempting to access this screen while
driving will display the warning-Can’t operate while driving.
7
Adjustment Procedure for Dolby
Surround
Storing Settings in the Memory (page 61)
(Storing all the settings and adjustments made on the
INA-W910R (not only the above settings/adjusts) in
the memory)
In case of combining the Automatic adjustments, etc.
Make the adjustments described below in order to reproduce Dolby
Digital and DTS sound with greater accuracy.
We recommend to make the Automatic adjustments before the Dolby
Surround adjustments.
Adjustment procedure
Setting the External Audio Processor
1
Speaker Setup (page 60)
2
Adjusting the speaker levels (page 60)
(Turning the speakers to be used on and off and
setting their response)
(Adjusting the signal output level to the various
speakers)
Following Steps 1 to 7 describe the common procedures for
operating the Audio Processor setting function. For details of
the setting function items, refer to descriptions of respective
items.
1
2
Check whether the Defeat mode is OFF.
Press SOURCE/
on the unit.
The Source Select screen is displayed.
3
Touch [
] on the source selection screen.
The Setup Select screen is displayed.
3
Mixing bass sound to the rear channel
(page 60)
(Achieving smooth sound in the rear seat by mixing
the front audio signals with the rear speaker signals)
4
Touch [
] of Audio Setup.
The Audio Setup screen appears.
5
Touch [
] of A.Processor.
The A.Processor list screen appears.
6
Touch [ ], [ ] or [
change its setting.
], etc., of the desired item to
Setting items :
Media Xpander / Bass Sound Cont. / Dolby PLII / Rear Fill /
X-Over / Time Correction / Phase / G-EQ / P-EQ / Speaker Select /
Multi Ch Setup / Speaker Setup / DVD Level / PCM Mode
7
Touch [
] to return to the previous screen.
• Touching [Exit] will change to the main source screen.
56-EN
Set MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
Setting item : Media Xpander
1
Select ON or OFF of MX by touching [ ] or [ ] of
Media Xpander.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
2
Touch [
] of Media Xpander after setting to ON.
The Media Xpander setup screen appears.
3
Touch [ ] or [ ] of the desired MX mode.
• Music source (such as CDs, iPod) level can be set.
MX CD (OFF, CD MX 1 to 3)
CD mode processes a large quantity of data. This data is used
to reproduce the sound cleanly by making use of the data
quantity.
MX CMPM (OFF, CMPM MX 1 to 3)
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX DVD (OFF, Movie MX 1 to 2)
The dialogue portion of the video is reproduced more clearly.
(DVD Music)
This disc contains a large quantity of data such as music clip.
MX uses this data to reproduce the sound accurately.
MX AUX (OFF, CMPM MX, Movie MX, Music MX)
Choose the MX mode (CMPM, Music, or Movie) that
corresponds to the media connected.
• The contents of MX set here is reflected to PXA-H700 or PXA-H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as CD, and MP3 can have its own MX
setting.
• There is no MX mode for FM, MW and LW radio.
• MX CMPM is applied for MP3/WMA/AAC and iPod/iPhone.
• The MX setting can be performed only when a source is currently
selected.
• This function is inoperable when Defeat is set to ON.
Setting Bass Sound Control
Setting item: Bass Sound Cont.
Setting Bass Compressor
You can adjust the sound of low frequencies as desired.
Touch [ ] or [ ] of Bass Comp. to select the desired
mode.
Bass sound is emphasised more as the mode is sequentially
2
3, offering you vivid low
switched as Mode 1
frequencies.
Select OFF when the setting is not necessary.
Setting Bass Focus
Using the previously specified delay number (time difference)
allows you to set a time difference between the front-rear/leftright speakers. Namely, it enables a time correction based on
your preference. With an initial delay of 0.05 ms for each of the 0
to 400 steps, audible time correction can be achieved.
Set the delay number in the front and rear, and on the
right and left of the desired speaker by touching the
respective [ ] or [ ] button.
• Any setting in Bass Focus is applied in time correction, too (page 58).
Using the Pro Logic II Mode
Pro Logic processing can be conducted on the music signals recorded
on two channels to achieve Dolby Pro Logic II surround sound. For
two-channel Dolby Digital and DTS signals, there is also a “Rear Fill”
function for outputting the signals of the front channel to the rear
channel.
Setting item: Dolby PLII / Rear Fill
Touch [ ] or [ ] of Dolby PLII/Rear to select the desired
mode.
PLII Movie:
PLII Music:
OFF:
Suits the stereo TV shows and all programmes
encoded in Dolby Surround. It improves the
sound field directivity to near that of discrete
5.1-channel sound.
Can be used for all stereo music recordings, and
provides a wide, deep sound field.
Turns Dolby PLII function to OFF.
If PLII Music is selected, the centre width can be adjusted with
following operations.
This function offers the optimum vocal position by adjusting the
centre channel position between the centre speaker and the L/R
speaker. (The adjustments established in “Adjusting the
acoustic image (Bi-Phantom)” (page 60) are ineffective while
this function is activated.)
Touch [ ] or [ ] of Centre Width Cont. to adjust the level.
The level can be adjusted between 0 to +7. When the level
increases, the centre channel position moves from the
centre speaker position to both sides.
Touch [Off] of Centre Width Cont. to turn off the centre width
control.
• This adjustment is effective when the setting of the centre speaker is
Small or Large in the Speaker Setup (page 60).
• “Rear Fill” function:
Depending on the input signals, the sound may only be output from
the front speakers. In this case, the “Rear Fill” function can be used
to output signals from the rear speakers as well.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
• This adjustment is ineffective when the speaker is set Centre to OFF
in “Setting the Speakers” (page 59).
• This function only works with two-channel signals. This operation is
ineffective when 5.1-channel DTS or Dolby Digital signals are input.
• If the setting of Rear Fill is made when Rear Mix is ON, sound is
unchanged in the Rear Fill setting because Rear Mix is given priority
during 2 channel decoder other than linear PCM.
• For linear PCM signals, the voice is output from the rear speaker
regardless of the Rear Fill and Rear Mix setting.
57-EN
X-OVER Adjustment
Concrete examples
Calculating the time correction value for the front left speaker on
the diagram below.
Setting item: X-Over
1
Conditions:
Distance between farthest speaker and listening position:
2.25 m (88-3/4")
Distance between front left speaker and listening position:
0.5 m (20")
Calculation:
L = 2.25 m (88-3/4") – 0.5 m (20")= 1.75 m (68-3/4")
Compensation time = 1.75 ÷ 343 x 1,000 = 5.1 (ms)
Touch [ ] or [ ] of X-Over to select L+R or L/R.
L+R: Sets the same adjustment values for the left and right
channels.
L/R: Different adjustment values can be set for the left and
right channels.
2
Touch [
] of X-Over.
In other words, setting the time correction value for the front left
speaker to 5.1 (ms) sets a virtual distance matching the
distance to the farthest speaker.
A speaker list on the X-Over screen is displayed.
3
Touch [
] of the speaker to be adjusted.
The screen changes to the X-Over screen to be adjusted.
4
Adjust the crossover to your preference.
Selecting the Cut-Off Frequency
Touch [ ] or [ ] of Freq., then select the cut-off frequency
(crossover point).
5.1ms
The adjustable bandwidth differs depending on the speaker
(channel).
0.5m
2.25m
Adjusting the Level
Touch [ ] or [ ] of Level, then adjust the HPF or LPF level.
Adjusting the Slope
Touch [ ] or [ ] of Slope, then adjust the HPF or LPF slope.
• When the speaker is set to the “OFF” mode, the X-Over for that
speaker cannot be set. Refer to “Setting the Speakers” (page 59).
• Check the playback frequencies of the connected speakers before
adjusting.
• In order to protect the speakers, there is no OFF setting for the
subwoofer low pass filter (the slope remains the same).
• The HPF cannot be set Slope to OFF if Tweeter (TW) is selected for
Front1. Or, only the subwoofer is adjustable if Stereo is selected for
the subwoofer.
Performing Time Correction Manually
(Time Correction)
The sound is uneven because
the distance between the
listening position and the
different speakers is different.
The difference in the distance
between the front left and rear
right speakers is 1.75 meters
(68-3/4").
4
1
2
Sit in the listening position (the driver’s seat, for
example) and measure the distance (in meters)
between your head and the various speakers.
Calculate the difference in distance between the
farthest speaker and the other speakers.
L=
3
(distance of farthest speaker)
– (distance of other speakers)
Divide the distances calculated for the different
speakers by the speed of sound (343 m/s
temperature 20°C).
This value is the time correction value for the various
speakers.
58-EN
Touch [ ] or [ ] of Time Correction.
Select L+R or L/R.
Because of the particular conditions inside the vehicle, there can be
major differences in the distances between the various speakers and the
listening position. It is possible to calculate the optimum correction
values and eliminate the time error at the listening position yourself
using this function.
Setting item: Time Correction
Time correction eliminates
the difference between the
time required for the sound
from the different speakers to
reach the listening position.
Setting the time correction of
the front left speaker to 5.1
ms makes it possible to
coordinate the distance from
the listening position to the
speaker.
L+R: Sets the same adjustment values for the left and right
channels.
L/R: Different adjustment values can be set for the left and
right channels.
5
Touch [
] of Time Correction.
The Time Correction adjustment screen appears.
6
Adjust the time correction value (0.00 ~ 20.00ms) of a
desired speaker by touching the respective [ ] or
[ ] button (1 step = 0.05ms).
• When the speaker is set to the “OFF” mode, the TCR for that
speaker cannot be set. Refer to “Setting the Speakers” (page 59).
• The adjustment value for Front2 (Speakers) which is adjusted in time
correction, is also applied to the front speakers in “Setting Bass
Focus” (page 57).
• The adjustment (AUTO TCR) cannot be automatically set on this
unit.
Phase Switching
Setting item: Phase
Switch the phase (0° or 180°) by touching [ ] or [ ] of
the desired speaker.
Graphic Equalizer Adjustments
2
Touch [
] of P-EQ.
The P-EQ list screen appears.
3
Touch [
] of the desired speaker (channel).
The P-EQ adjustment screen appears.
4
Adjust the P-EQ to your preference.
Selecting the Band
Touch [ ] or [ ] of Band to select the desired band.
The graphic equalizer allows you to modify the sound using 31 bands
each for the front (left and right), rear (left and right) and centre
speakers. An additional 10 bands are available for the subwoofer. This
allows you to customize the sound to suit your taste.
Setting item: G-EQ
1
Select L+R or L/R by touching [ ] or [ ] of G-EQ.
L+R: Sets the same adjustment values for the left and right
channels.
L/R: Different adjustment values can be set for the left and
right channels.
When parametric EQ is adjusted, this setting will be turned
off.
2
Touch [
] of G-EQ.
The G-EQ list screen appears.
3
Touch [
] of the desired speaker (channel).
The G-EQ adjustment screen appears.
4
Adjust the G-EQ to your preference.
Adjusting the Level
Adjusting the Frequency
Touch [ ] or [ ] of Freq. to adjust the frequency of the
selected band.
Adjusting the Level
Touch [ ] or [ ] of Level to adjust the level of the selected
band.
Setting the Bandwidth
Touch [ ] or [ ] of Q to select the bandwidth.
• When the speaker is set to the “OFF” mode, the parametric
equalizer for that speaker cannot be set. Refer to “Setting the
Speakers” (page 59).
• It is not possible to adjust the frequencies of adjacent bands within 7
steps.
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When the Parametric EQ is adjusted, the adjustment for Graphic EQ
becomes ineffective.
Touch [ ] or [ ] of the desired frequency to adjust the level.
• When the speaker is set to the “OFF” mode, the graphic equalizer
for that speaker cannot be set. Refer to “Setting the Speakers”
(page 59).
• Check the playable frequency ranges of the connected speakers
before making the equalizer adjustments. If the speaker’s playable
frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz
or 20 Hz band has no effect. Additionally, you may overload and
damage the speakers.
• When Graphic EQ is adjusted, the adjustment for Parametric EQ
becomes ineffective.
Setting the Speakers
Setting item: Speaker Select
Set the connected speaker by touching the respective
[ ] or [ ] button.
Front1:
Front2:
Rear:
Centre:
Subw.:
OFF/Full (Full Range)/TW (Tweeter)
OFF/ON
OFF/ON
OFF/ON
OFF/Mono/Stereo
Parametric Equalizer Adjustments
The frequency bands of the graphic equalizer are fixed. This makes it
very difficult to correct for undesired peaks and dips at specific
frequencies. The parametric equalizer’s centre frequency can be tuned
to these specific frequencies. Then, the bandwidth (Q) and level are
fine-tuned, independently, to make the necessary corrections. The
parametric equalizer function is an advanced tool for serious
audiophiles.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 60).
• To use the subwoofer in Mono with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Setting item: P-EQ
1
Select L+R or L/R by touching [ ] or [ ] of P-EQ.
L+R: Sets the same adjustment values for the left and right
channels.
L/R: Different adjustment values can be set for the left and
right channels.
When Graphic EQ is adjusted, this setting will be turned off.
59-EN
Setting of Dolby Digital
Setting item: Multi Ch Setup
Adjusting the acoustic image (Bi-Phantom)
In most installations, the centre speaker must be placed directly
between the front passenger and driver. Using this function, the
centre channel information is distributed to the left and right
speakers. This creates an acoustic image simulating a centre
speaker directly in front of each listener. Adjusting the centre
width in PLII Music (see “Using the Pro Logic II Mode” on
page 57), makes this function ineffective.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
Touch [ ] or [ ] of Bi-Phantom to adjust the level.
The level can be adjusted within the range of -5 to +5. The higher the
level, the more the position of the centre speaker is shifted to the
sides.
The Bi-Phantom function is turned off by touching [Off].
• This adjustment is effective when the setting of the centre speaker to
Small or Large in the speaker setup settings.
• This adjustment is ineffective when the speaker is set Centre to OFF
in “Setting the Speakers” (page 59).
Mixing bass sound to the rear channel (Rear Mix)
This function mixes the front channel audio signals to the audio
signals output from the rear speakers, improving the sound in
the vehicle’s rear seat.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
Adjusting the speaker levels (Output Level)
The test tones help to make the volume adjustments of the
different speakers. When levels are equal, a strong sense of
presence can be heard from the different speakers at the
listening position.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the decode mode is switched.
1 Touch [On] of Output Level.
Test tone output is repeated for each of the different speaker
channels. They will be repeated in the order shown below.
If no operation is performed for 2 seconds, the channel
switches to the next channel.
Left
Centre
Left Surround
Right
Left
Right Surround
2 While the test tone is being produced from the speakers,
touch [ ] or [ ] of Output Level balance the output from all
the speakers.
• The adjustment range for the different speakers is
–10 dB - +10 dB.
• Adjust based on the front speakers.
3 Touch [On] again to turn off.
• If a speaker is set to off mode, that speaker’s level adjustment cannot
be made. Refer to “Speaker Setup” (page 60).
Speaker Setup
The PXA-H700 or PXA-H701 can be set according to the playable
frequency range of your speakers.
Check the playable frequency range of the speakers (not including the
subwoofer) before performing this operation to verify whether the
speakers can play low frequencies (of about 80 Hz or less).
Touch [ ] or [ ] of Rear Mix to adjust the level.
The level can adjusted in five steps: -6, -3, ±0, +3 and +6. The higher
the level, the more bass is output from the rear speakers. (The effect
differs according to the software (DVD, etc.).)
The Rear Mix function is turned off by touching [Off].
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if Decode mode is switched.
• This adjustment is ineffective when the rear speaker setup setting is
set to “OFF”.
• For linear PCM signals, the voice is output from the rear speaker
regardless of the Rear Fill and Rear Mix setting.
Select the speaker characteristic by touching [ ], [ ] of
the desired speaker setting.
Setting item: Speaker Setup
OFF*1:
Small:
Achieving powerful high volume sound (Listening Mode)
With Dolby Digital, the dynamic range is compressed so that
powerful sound can be achieved at regular volume levels. This
compression can be cancelled to achieve an energetic sound
with even greater power, like the sound in a movie theatre. This
function works only in the Dolby Digital mode.
Touch [ ] or [ ] of Listening Mode to select STD or
MAX.
STD: For powerful sound at regular volume levels
MAX.: For powerful sound at high volumes
• Keep the volume to a level at which sounds outside the vehicle can
still be heard.
60-EN
Large*2:
When no speaker is connected.
When a speaker that cannot play low frequencies
(80 Hz or less) is connected.
When a speaker that can play low frequencies
(80 Hz or less) is connected.
*1 It is not possible to set the front speakers to “OFF”.
*2 If the front speakers are set to “Small”, the rear and centre speakers
cannot be set to “Large”.
• The subwoofer can be set only to ON/OFF.
• If the centre speaker is turned “OFF”, the centre channel’s audio
signals are added to the audio signals output from the front speakers.
• If you set the speaker response to “OFF”, also set the speaker setting
to “OFF” (page 59).
• Perform the setup for all the speakers (“Front”, “Centre” ,“Rear”
and “Subwoofer”). If not, the sound may not be balanced.
• When centre is set to “OFF”, the setting is ineffective even if centre
is set with this function.
• Through changing the settings on each speaker, a change in the
output of the other speakers may occur due to the setting
requirements.
• When using the PRO Logic II, if the rear speaker is set to “Large”,
then there will be no output from the subwoofer.
Adjusting the DVD Level
The volume (signal level) for Dolby Digital, Dolby PLII, DTS and PCM
modes can be set.
• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding
or switching the audio channel of this unit while making this
adjustment. The setting is cancelled if the Decode mode is switched.
BT Hands Free
Calling
• BT Audio source is not available with this unit.
Setting item: DVD Level
Adjust the level by touching [
adjusting mode.
] or [ ] of the desired
Linear PCM Setting
The output when playing discs recorded in linear PCM can be set to 2 or
3 channels.
Setting item: PCM Mode
Touch [ ] or [ ] of PCM Mode to select 2CH or 3CH.
2CH: 2ch output (L/R)
3CH: 3ch output (L/R/CENTRE)
• This adjustment is ineffective when the speaker is set Centre to OFF
in “Setting the Speakers” (page 59).
Storing Settings in the Memory
Adjustment or setting contents can be stored.
Contents that can be stored vary depends on the audio processor used.
1
2
Touch [MEMORY] on the A.Processor list display.
Within 5 seconds, touch any one of the preset
buttons [P.SET 1] through [P.SET 6] on the
A.Processor list screen.
The setting contents are stored.
• The stored contents will not be deleted even when the battery power
cord is detached.
Setup Before Using
About BLUETOOTH
BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 meters. For details, refer to the BLUETOOTH
Home page (http://www.bluetooth.com).
• Depending on the BLUETOOTH version, a BLUETOOTH
compatible device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible
devices is not guaranteed. For handling of the BT compatible device,
consult your ALPINE dealer or ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the
connected device(s).
Before Using Hands-Free Function
Before using the hands-free phone function, the following settings need
to be made.
Set “BLUETOOTH IN” to ON (page 49).
• Before using a hands-free phone, it must be paired with this unit.
Refer to “BLUETOOTH Setup” (pages 62-64).
Calling up the Preset Memory
Touch any one of the preset buttons [P.SET 1] through
[P.SET 6] on the A.Processor list display to select the
preset memory.
• It takes a few moments to call up the preset memory.
How to connect to a BLUETOOTH
compatible device (Pairing)
For details on the control from a BLUETOOTH compatible device,
refer to the Owner’s Manual of the BLUETOOTH compatible device.
1
2
3
4
Set a BLUETOOTH connection from a BLUETOOTH
compatible device.
The PIN code (“0000”) is displayed on the unit.
Input the PIN code (“0000”) in a BLUETOOTH
compatible device.
If this unit is successfully connected to a
BLUETOOTH compatible device, “Connected/
(Device name)” is displayed, and then the unit
returns to normal mode.
61-EN
• Set “Setting the Search Mode” (page 63) to Visible Mode ON to
enable this unit to recognise a mobile phone. For mobile phone
passkey (passcode) input operation, refer to the mobile’s Owner’s
Manual. Additionally, the mobile phone can be searched directly
from this unit. Refer to “Registering the BLUETOOTH Device”
(page 62).
• If a BLUETOOTH compatible device is successfully connected, the
next time when the ignition key of the car is turned to on, the unit will
automatically connect to the previously connected device. However,
the connection may fail. If the auto connection fails, try the
connection manually.
BLUETOOTH Setup
BLUETOOTH Setup Operation
The following steps 1 to 6 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
• While calling, BLUETOOTH Setup operation cannot be performed.
• Set “BLUETOOTH IN” to ON (page 49), and then perform
BLUETOOTH Setup operation.
1
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
Touch [
] on the main source screen.
The Setup Select screen is displayed.
3
Touch [
] of Source Setup.
The Source Setup screen appears.
4
Touch [
] of BLUETOOTH Setup.
The BLUETOOTH Setup screen appears.
5
Touch [ ], [ ] or [
change its setting.
] of the desired item to
Setting items:
Paired Devices / Device Search / Clear Device /
Service Provider / Visible Mode / Auto Answer / Speaker Select /
MIC Input / Firmware Version / Firmware Update / Hung Up /
Echo Cancel / Navi Voice IN Call / BT Menu Language /
Shortcut Memory
6
Touch [
] on the left side of screen to return to the
previous screen.
Touch [Exit] to return to the main source screen that was
displayed before the setup operation was started.
62-EN
Setting the BLUETOOTH Device
Select one of 5 connected BLUETOOTH compatible devices that
you previously registered.
Setting item: Paired Devices
Touch a BLUETOOTH compatible device to use (change
connection) from the Paired Device list.
• If the connection is successfully changed, “Connected NO./(Device
name)” is displayed for 2 seconds, and then the display returns to the
Setup screen.
• If you input the wrong passcode or communications fail, “Failed” is
displayed.
• If you want to connect another BLUETOOTH compatible device,
after disconnecting the current BLUETOOTH compatible device,
connect the BLUETOOTH compatible device you want to change to.
• The registration number 5 is deleted when you set ignition from ACC
to OFF. If all the 5 positions have been registered, you cannot
register the 6th device. To register another device, you need to delete
one of the devices from position 1 to 5 first.
Registering the BLUETOOTH Device
The BLUETOOTH device is used when a connectable
BLUETOOTH compatible device is searched and connected
from this unit, or a new BLUETOOTH compatible device is
registered.
Setting item: Device Search
1
2
3
When Device Search is selected, “Now Searching” is
displayed, and searching starts.
Touch the device name to be connected from the
Device Search list.
If this unit is successfully connected to a
BLUETOOTH compatible device, a paired device
name and a registered number (No. 1 to 5) are
displayed, and then the unit returns to normal mode.
• If a mobile phone is registered for the first time:
Input a passcode when the numeric keypad screen is displayed, then
input the same passcode in the BLUETOOTH compatible device to
make the pairing. After the pairing is completed, the unit will
automatically connect to the BLUETOOTH compatible device.
• If you input the wrong passcode or communications fail, “Failed” is
displayed.
• A passcode input on the unit is maximum 4-digit. If a passcode on the
BLUETOOTH compatible device exceeds 4 digits, reset the passcode
and make this setting again.
Deleting a BLUETOOTH Device from the list
Selecting the output speaker
You can delete the history of a previously connected
BLUETOOTH compatible device.
You can select the connected speaker in car to output the sound
signal of telephone.
Setting item: Clear Device
Setting item: Speaker Select
1
Touch the BLUETOOTH compatible device you want
to delete from the Clear Device list.
A message is displayed.
2
Touch [Yes] if you want to delete.
All: The sound be output from all of speakers in car.
F-L: The sound only be output from the front left speaker.
F-R: The sound only be output from the front right speaker.
F-LR: The sound be output from the front left and front right
speaker.
Displaying the phone service provider name
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
• When an IMPRINT audio processor (PXA-H100) or External Audio
processor (PXA-H701, etc.) is connected, the default setting All will
be set and cannot be adjusted.
Setting item: Service Provider
Adjusting the volume for the microphone input
The service provider name of the connected BLUETOOTH
compatible device will be displayed. If a BLUETOOTH
compatible device is not connected, “ID Unsent” will be
displayed.
You can emphasise or weaken the microphone input volume
level.
• Touching [No] will cancel the setting.
• The registration number 5 is deleted once the ignition key goes from
ACC to OFF.
Setting item: MIC Input
Touch [
• Depending on the character type some phone service provider name
cannot be displayed.
Setting the Search Mode
You can set whether this unit can be recognised or not from a
BLUETOOTH compatible device. Normally set this to Visible
Mode ON.
] or [
] to select the desired volume level (0 ~ 7).
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
• The setting can be adjusted only when the BLUETOOTH compatible
device is connected.
Displaying the firmware version
Setting item: Firmware Version
Setting item: Visible Mode
ON: Enables recognition of this unit from the BLUETOOTH
compatible device.
OFF: Disables recognition of this unit from the BLUETOOTH
compatible device.
The current firmware version will be displayed.
Updating the firmware
Setting item: Firmware Update
Setting the Received Calls automatically (Auto Answer)
Future BLUETOOTH firmware update (for phone compatibility) at
customer end will be available for this unit.
For information to update your BLUETOOTH firmware, please
visit your local Alpine web site or choose your country from
Alpine Europe top page (http://www.alpine-europe.com).
When a call is received, you can set whether to receive it
automatically or not.
Setting the Hang Up Mode
• Depending on the mobile phone, it may be necessary to input a
passcode. For inputting the mobile phone’s passcode, refer to the
mobile phone’s Owner’s Manual.
Setting item: Auto Answer
ON: When a call is received, it will be taken automatically after
about 5 seconds.
OFF: When a call is received, it will not be received
automatically. If a message is displayed and [
] is
touched when a call is received, you can receive the call.
• If the received call setting on the mobile phone is on, the call will be
answered automatically even though this setting is set to OFF.
• If a second call caution is displayed, auto calling is unavailable even
if Auto Answer is set to “ON”.
When there’s an inserted call, Hung UP button is displayed in the
bottom right of the navigation screen during a phone call.
Setting item: Hung Up
ON: The [
OFF: The [
] is displayed.
] is not displayed.
Turning the Echo Cancel ON or OFF
Setting item: Echo Cancel
The echo of hands-free phone will be avoided correspondingly
by setting the Echo Cancel to ON.
63-EN
Receving Navigation Voice while calling
Setting item: Navi Voice IN Call
The voice guidance of the navigation system will be mixed with
the call by setting the Navi Voice IN Call to ON.
Setting the BT Menu language
The BT Menu can be switched within 7 languages. The items
selected are indicated in yellow.
Setting item: BT Menu Language
Setting contents: English / Deutsch / Francais / Espanol /
Italiano / Nederlands / Hebrew
Deleting the stored shortcut memory
You can delete the stored shortcut memory telephone number
by using here.
Setting item: Shortcut Memory
Touch [Delete] of preset 1-5 to delete the shortcut memory.
• About how to store the telephone number as a shortcut dial, refer to
page 67.
Answering a Call
Incoming calls are announced by the received call ring tone and a
displayed message (Caller name/PHONE No.).
Touch [
].
The call starts.
• Indicator
(Signal Strength):
While calling, the indicator will display the current signal strength of
mobile phone. While in the mode other than Calling, the unit cannot
read the signal strength of the mobile phone exactly. In this case, the
indicator displays the signal strength of last call.
• When “Setting the Received Calls automatically (Auto Answer)”
(page 63) is set to ON, you can receive a call automatically.
• While calling, the source sound on the unit is muted.
After calling, playback will resume.
Hanging up the Telephone
Touch [
Hands-Free Phone Control
About the Hands-Free Phone
Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with this unit.
• Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
• Close the windows while calling to reduce background noise.
• If both calling parties are using hands-free devices, or the call is
made in a noisy location, difficulty hearing the other person’s voice
is normal.
• Depending on telephone line conditions or certain mobile devices
used, voices may sound unnatural.
• When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
• Certain mobile phone features are dependent on the capabilities and
settings of your service provider’s network. Additionally, certain
features may not be activated by your service provider, and/or the
provider’s network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well
as the information contained in the Owner’s Manual are based upon
the latest available information and are believed to be accurate at
the time of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
].
The call finishes.
Adjusting the volume when receiving a
Call
While calling, you can adjust the volume. The adjusted volume level is
stored.
Press
/
on this unit to adjust the volume.
• You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result
in feedback. If feedback is noticed as feedback is directly related to
the volume, turn down the volume as low as acceptable to eliminate
it. Positioning the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce feedback at high
volume.
Redial Function
You can redial the person you have previously called.
After finishing a call, touch [
5 seconds.
] on the screen within
The telephone is redialed.
Call Switching Operation
While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.
While calling, touch [
] to switch the call sound
between the unit and mobile phone.
• Depending on the mobile phone, this operation may not be
performed.
64-EN
Call History
Call History is recorded for the last dialed/received/missed calls. There
are various ways of making calls based on the “Call History”. The
following steps 1 to 3 are common to the various ways of making these
calls. For details, refer to each individual category for making calls.
1
Previously dialed telephone numbers are stored in dialed numbers
history. You can redial a number by searching from dialed numbers
history.
Setting item: Dialled Numbers
Press and hold MUTE/PHONE for at least 2
seconds.
The Telephone Menu screen is displayed.
2
Redialing a Number in Dialed Numbers
History
Touch [Call] of the person name or the telephone
number you want to call from the Dialed Numbers list.
The call is placed.
Touch [
] of the desired item to place the call.
Setting items:
When “BT Menu Language” is set to “English”, the Telephone
Menu is displayed as:
Dialled Numbers / Received Calls / Missed Calls / Phone Book /
Voice Dial / Dial Input
Dialing a Number in Received Calls History
Telephone numbers from received calls are stored in the received calls
history. You can redial these numbers by searching here.
When “BT Menu Language” is set to “Deutsch”, the Telephone
Menu is displayed as:
Setting item: Received Calls
When “BT Menu Language” is set to “Francais”, the Telephone
Menu is displayed as:
The call is placed.
Touch [Call] of the person name or the telephone
number you want to call from the Received Calls list.
Dialing a Number in Missed Calls History
When “BT Menu Language” is set to “Espanol”, the Telephone
Menu is displayed as:
Telephone numbers for received calls that are missed, are stored in the
missed calls history. You can redial these numbers by searching here.
Setting item: Missed Calls
When “BT Menu Language” is set to “Italiano”, the Telephone
Menu is displayed as:
Touch [Call] of the person name or the telephone
number you want to call from the Missed Calls list.
The call is placed.
When “BT Menu Language” is set to “Nederlands”, the Telephone
Menu is displayed as:
Dialing a Number In the Phone Book
(Phone Book)
When “BT Menu Language” is set to “Hebrew”, the Telephone
Menu is displayed as:
Up to 1,000 telephone numbers are downloadable to the BLUETOOTH
compatible unit from a mobile phone. Dial a call by selecting a person
from the phone book list.
For details, refer to “Setting the BT Menu language” (page 64).
Setting item: Phone Book
• The unit will update the information in the Call History
automatically each time a mobile phone is connected or receiving/
dialing a call. At this time, if you select any outgoing mode, “Now
Updating” will be displayed.
• It may take some time for the list to be displayed, and also directly
after connection, the list may not be brought up to date.
Display example for Phone book screen
3
Touch [
] to return to the previous screen.
Touch [Exit] to return to the main source screen that was
displayed before the setup operation was started.
• If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.
Scroll the list one line at a time by touching [ ] or [ ].
Scroll the list one page at a time by touching [ ] or [ ].
Activate alphabet search function. For details, refer to
“Phone book alphabet search function” (page 66).
65-EN
Touch [Call] of the person name or the telephone
number you want to call from the Phone Book list.
2
The call is placed.
• If one name has several numbers registered in the telephone book,
]
choose and touch [Call] of the desired number after touching [
of the name, the telephone will be called. Touch [Call] of the name
directly, the default number of the name will be called. Depending on
the connected mobile phone, this function may not be performed.
• If a name cannot be obtained via the phone book, only the telephone
number (default number) is displayed. If both name and number
cannot be obtained, “ID Unsent” will be displayed.
• If the call history or phonebook of the mobile phone is added or
deleted while it is connected to the unit, the list displayed on the unit
may not be brought up to date. If it is not updated, you cannot
correctly place a call.
The numeric keypad screen is displayed. Touch
(input) the telephone number, and then touch [Call].
The call is placed.
• About the numeric keypad
[ ]: closes the numeric keypad input screen.
[Delete All]: deletes all input numbers.
[
]: deletes a previous number.
Phone book alphabet search function
Touch [ALPHABET] on the Phone Book screen to display the Search
screen. Touch one of the characters from A to Z, or numbers from 0 to
9, to switch to the corresponding list.
1
Touch [ALPHABET].
The alphabet search screen is displayed.
Voice Dial Operation
You can call the telephone by performing voice operation.
Setting item: Voice Dial
1
Touch [
] of Voice Dial.
A message is displayed.
2
Touch [Yes] to activate the voice dial mode.
The voice dial mode is activated, and “Speak” is displayed.
• Touch [No] will return to the Telephone Menu screen.
3
Say the telephone number*, name* you want to call
into the microphone.
2-1 Touch the alphabet of the name you want to search.
(e.g.: Touch “B”)
* The number and name depend on the voice dial information stored in
the mobile phone.
The phone book screen of the alphabet you selected is
displayed.
• If the voice dial fails, the unit will return to normal mode in 30
seconds.
• You can perform this operation only when a voice dial compatible
mobile phone is connected. If the mobile phone is not compatible
with the voice dial, “No Support” is displayed for 2 seconds.
• The Voice Dial function performance depends on the recognition
range of the mobile phone and mounting location of the microphone.
Note when the microphone is mounted.
• Voice dial operation depends on the function of the mobile phone.
For details, refer to the Owner’s Manual of the mobile phone.
Dialing a Number Using Direct Dial Input
You can place a call by inputting the telephone number directly by the
numeric keypad screen on the unit.
1
Touch [
] to display the item of Dial Input.
Setting item: Dial Input
Display example for the Dial Input screen
2-2 Touch [Cyrillic]* or [Hebrew]*.
The character/number keypad displayed in A area will be
changed.
* The button displays only when the Language Font is set to Mode2
(Russian Font) or Mode4 (Hebrew Font). For detailed setting, please
refer to “Changing the Language Font” on page 46.
• You can select your preferred language code. Refer to “Changing the
Language Font” (page 46).
3
Touch [Call] of person name or the telephone
number you want to call.
The call is placed.
4
66-EN
Touch [
] to return to the previous screen.
Touch [Exit] to return to the main source screen.
Second incoming call function
If a second call is received during a current call, you can have the first
caller wait momentarily while you take the second call. When you are
finished with one call, you can switch to the other one.
1
If a second call is received during a current call, an
incoming call message can be displayed on the
calling screen. Touch [
] on the incoming call
message.
In this case, the current call on hold, while you take the new
call. The name and telephone number of the person on hold
are displayed.
Preset a number in the Phone Book
(Shortcut dial)
Numbers that you dial frequently can be as signed to preset for quick
recall.
You can assign up to five frequently called phone numbers to number
presets.
1
Touch [
] of the person’s name you want to preset
from the Phone Book list.
The Phone Book number screen is displayed.
Display example for Phone Book number list screen
Display example for the 2nd incoming call screen
2
Touch [Preset].
The phone number you selected is stored in presets.
A
Second call message
Hang up the first call and the second incoming call is
answered.
Hang up the second incoming call.
• The [Preset] Key in the Phone Book screen is unavailable when
memory is full.
• If all the 5 positions have been used, you cannot assign the 6th
number. To assign another number, you need to delete one of the
preset number from position 1 to 5 first. About how to delete the
preset number, refer to “Deleting the stored shortcut memory” on
page 64.
Display example for the connected 2nd incoming call screen
Dialing the preset number
Display example for Telephone Menu screen
B
2
Feedback of the connected second call
By touching [
] on the call waiting
screen, you can switch between the calling person
and the person on hold.
Touch any one of the preset buttons [P.SET 1] through
[P.SET 5] that has a number stored to it on the
Telephone Menu screen.
The stored preset number is dialed directly.
67-EN
Camera Operation
(Optional)
When an optional camera is connected, the view video of camera can be
output to the monitor.
Topview camera, Front camera or Rear camera can be connected to this
unit.
Depending on your camera, please choose the connection method
(Direct or RCA) and camera type (Topview, Front or Rear) first. For
details, refer to “Setting the Camera Input” (page 48).
For the information of the Alpine camera, refer to the table below.
Front
Rear
Direct Camera
RCA Camera
HCE-C200F
—
HCE-C300R*1
HCE-C200R
HCE-C115
HCE-C117D
Front camera*2
When the HCE-C200F is connected, conditions in front of the
vehicle, such as a poor-visibility road, can be determined.
Rear camera Operation
Display the rear view video manually
1
2
*1 When connecting to HCE-C300R, calibration must be performed.
For details on calibration, refer to “Calibration when connected to
HCE-C300R” (page 97) and “Calibration” in the owner’s manual of
HCE-C300R.
*2 A commodity camera (with RCA video output) can also be connected
to the Camera Video Input connector as the front or rear camera.
Front camera Operation
on the unit.
The Source Select screen is displayed.
2
Touch
(CAMERA).
The Camera mode is activated and view video is displayed.
3
4
Touch any area of the screen to display the view
change function keys.
Touch [Panorama], [Corner] or [Top] to choose
the view angle.
Touch [
], the view change function keys will disappear.
[Panorama]: Panorama View
[Corner]:
Corner View
[Top]:
Ground View
• For more information, please refer to the owner’s manual of
connected front camera.
68-EN
(CAMERA).
The Camera mode is activated and view video is displayed.
3
4
Touch any area of the screen to display the view
change function keys.*3
Touch [Back], [Panorama], [Corner] or [Top] to
choose the view angle.
[Back]:
[Panorama]:
[Corner]:
[Top]:
5
Rear View
Panorama View
Corner View
Ground View
Touch [Guide On] or [Guide Off] to set whether the
rear camera guide line*4 is displayed.
], the view change function keys will disappear.
Display the rear view video while the car is
in reverse
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
3
Touch any area of the screen to display the view
change function keys.*3
Touch [Back], [Panorama], [Corner] or [Top] to
choose the view angle.
[Back]:
[Panorama]:
[Corner]:
[Top]:
Display the front view video manually
Press SOURCE/
Touch
Touch [
If an HCE-C300R/HCE-C200R/HCE-C117D/HCE-C115 series
camera is connected, when the vehicle is reversed, the rear
camera view (guide marks for vehicle width and available
distance) is displayed automatically on the screen of this unit.
on the unit.
The Source Select screen is displayed.
Rear camera*2
1
Press SOURCE/
4
Rear View
Panorama View
Corner View
Ground View
Touch [Guide On] or [Guide Off] to set whether the
rear camera guide line*4 is displayed.
Touch [
], the view change function keys will disappear.
*3 Displays only when the rear camera with view change function is
connected and View Change Func. is set to ON (page 48).
*4 Displays only on the Back view screen of rear camera.
• Be sure to also check behind the car visually. Use the camera image
to assist in showing conditions behind the car.
• This function is effective when the reverse wire is properly connected.
• For more information, please refer to the owner’s manual of
connected rear camera.
Adjusting Alarm Volume (HCE-C300R only)
Display example for sensitivity adjustment screen
This operation can be performed only when the gear lever is in the
reverse position (R).
Make sure view change function is set to ON (page 48).
1
2
Touch any area of the screen to display the view
change function keys.
Touch [Back] for three times.
The volume adjustment screen appears.
3
Touching the button toggles the volume level.
Touch [Panorama] to switch a desired Volume
Level.
Display example for volume adjustment screen
Low: Detects mainly moving objects.
Almost no motionless objects are detected.
High: Detects moving objects and motionless objects.
5
Touch [
] to return to normal mode.
Touching the button toggles the volume level.
4
Touch [
] to return to normal mode.
Adjusting Detection Sensitivity
(HCE-C300R only)
This operation can be performed only when the gear lever is in the
reverse position (R).
Make sure view change function is set to ON (page 48).
1
2
Touch any area of the screen to display the view
change function keys.
Touch [Back] for three times.
The volume adjustment screen appears.
3
Touch [Back] again.
The sensitivity adjustment screen appears.
4
Touch [Panorama] to switch a desired detection
sensitivity level.
69-EN
SD Memory Video
Switching the SD Memory Video Screen
Video data recorded in the SD memory card can be played back by the
player built in this unit.
WARNING
It is dangerous for the driver to watch the TV/Video
while driving the vehicle. The driver may be distracted
from looking ahead and an accident could occur.
Install the INA-W910R correctly so that the driver
cannot watch TV/Video unless the vehicle is stopped
and the emergency brake is applied.
If the INA-W910R is not installed correctly, the driver
will be able to watch the TV/Video while driving the
vehicle and may be distracted from looking ahead and
cause an accident. The driver or other people could
be severely injured.
• If you try to activate the auxiliary device while driving, the display
will show the warning-Picture off for your safety.
1
Press SOURCE/
on the unit.
Auxiliary Device
(Optional)
Operating Auxiliary Devices (Optional)
To operate your devices connected to the AUX terminals on the rear
panel of INA-W910R (AUX1 mode) or to the iPod (V)/AUX Input
connector by using an AV/RCA interface cable (sold separately) (AUX2
mode), follow the procedure described below.
WARNING
It is dangerous for the driver to watch the TV/Video
while driving the vehicle. The driver may be distracted
from looking ahead and an accident could occur.
Install the INA-W910R correctly so that the driver
cannot watch TV/Video unless the vehicle is stopped
and the emergency brake is applied.
If the INA-W910R is not installed correctly, the driver
will be able to watch the TV/Video while driving the
vehicle and may be distracted from looking ahead and
cause an accident. The driver or other people could
be severely injured.
The Source Select screen is displayed.
2
Touch [SD card].
The playback starts.
• For Memory video operation, refer to the Owner’s Manual of “SD
Video Player Owner’s Manual” stored in the supplied CD-ROM.
• The SD-Video picture cannot be displayed on Rear monitor via AUX
OUT port.
• The SD-Video source can only output Mono sound.
• If you try to activate the auxiliary device while driving, the display
will show the warning-Picture off for your safety.
1
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
Touch [Aux1]* or [Aux2].
The external input screen is displayed.
3
Touch [NTSC/PAL] to change the video input.
* The name which is given as the source name in “Setting the AUX
Mode” on page 48 is displayed.
• If the AUX mode is not displayed on the main menu, set AUX1 IN to
ON or AUX2 IN to AUX by following “Setting the AUX Mode”
(page 48).
• The setting of switching NTSC/PAL, which you have set in this
section, can be used in same way in “Switching the Visual Input
Signal System” on page 49.
• The display mode changes by touching [WIDE].
For operation, refer to “Switching Display Modes” on page 37.
70-EN
TUE-T200DVB
Operation (Optional)
Changer
(Optional)
Operating the TUE-T200DVB (Optional)
Controlling CD Changer (Optional)
Operable when optional TUE-T200DVB is connected.
When DVB-T is selected in “Setting the AUX Mode” (page 48), the
source is displayed in Source selection screen.
An optional 6-disc or 12-disc CD Changer may be connected to the
INA-W910R if it is Ai-NET compatible. With a CD Changer connected
to the Ai-NET input of the INA-W910R, the CD Changer will be
controllable from the INA-W910R.
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on the
INA-W910R.
1
While your vehicle is parked, press SOURCE/
the unit.
on
The Source Select screen is displayed.
2
Touch [DVB-T].
The DVB-T screen is displayed.
3
Perform the desired operation.
Channel Number UP/Down or Favourite Channel Number
Up/Down
Touch [CH.]* to select changing the Channel or the Favourite
Channel.
Touch CH. [ ] or [ ] to move the Channel number Up/Down.
Touch FAV [ ] or [ ] to move the Favourite Channel number
Up/Down.
* The button displays the current changing mode ([CH.] or [FAV]).
Calling up Main Menu Screen
Touch [MENU] to call up the main menu screen.
Calling up Menu Operation Mode
Touch [MENU CONT] to call up the menu operation mode.
Switching the Source
Touch [A/V].
The source switches with each touch.
Calling up Electronic Programme Guide (EPG)
Touch [EPG] to call up the Electronic Programme Guide.
Scanning Mode
1
Touch [P1/3].
The function guide appears.
2
Touch [SCAN] to start the auto scan procedure.
• For detail, refer to the Owner’s Manual of the TUE-T200DVB sold
separately.
Video Menu Operation of TUE-T200DVB
1
Touch [P1/3] twice.
The direct touch mode screen is displayed.
• When the optional TUE-T200DVB is connected, you can control it by
the touch key (except the [Control] key) on the display screen of the
unit.
2
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by the INA-W910R.
See the Multi-Changer Selection section for selecting the CD Changers
(explained on page 72).
1
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
Touch [CD CHG].
The display changes to the CD changer mode screen.
When a 6 Disc CD Changer is connected;
1 Touch [P1/2]*.
The Function Guide display appears.
* When an MP3 compatible CD changer or DVD changer is
connected, touch repeatedly until the disc number is displayed.
2 Touch any one of the select buttons [DISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When an MP3 compatible CD changer is connected;
1 Touch [P1/3] twice to change the Function Guide display.
2 Touch any one of the select buttons [DISC 1] through
[DISC 6].
DISC 1 through DISC 6 select the discs from the first disc
to 6th disc.
When a 12-Disc CD Changer is connected;
You can select the disc numbers 1 to 6 in the same manner as
for 6-disc Changer.
Touch [P1/3] twice to select disc numbers 7 to 12.
The function guide display changes so that DISC 7 through
DISC 12 represent disc numbers 7 to 12.
• After selecting the desired disc, you can operate in the same way as
for the CD player. For details, see the CD/MP3/WMA/AAC section.
• When an MP3 compatible CD changer is connected, the unit can
play discs containing both audio data and MP3 data.
• The DVD changer (optional) is controllable from the INA-W910R as
well as the CD changer.
• For operation of the connected DVD changer (DHA-S690), refer to
the section “CD/MP3/WMA/AAC” or “DVD/Video CD” described
in this manual, or the Owner’s Manual of the DHA-S690.
• When the optional DVD changer (DHA-S690) is connected to this
unit, touching [NTSC/PAL] after touching [P1/4] three times will
change the video input.
Touch [Control].
Return to DVB-T main screen.
• If no operation is performed for 5 seconds, the screen will
automatically switch to the full screen mode.
71-EN
Multi-Changer Selection (Optional)
When using KCA-410C (Versatile Link Terminal), you can connect two
changers.
1
2
In changer mode, touch [CHG SEL] or press BAND
on the remote control (sold separately) to select the
next changer.
To operate the selected changer, see “CD/MP3/WMA/
AAC” section.
USB Memory/
Portable audio
player (Optional)
A USB memory or Portable audio player can be connected to this unit
through the USB Connector of this unit.
If a USB memory device or Portable audio player is connected to the
unit, MP3/WMA/AAC files of USB memory and MP3/WMA files of
Portable audio player can be played back.
BANK Function (Tag search mode only)
When a USB Memory is connected, the following description is
available only when Tag is set in “Setting the USB Search Mode”
(page 43).
What is a Bank?
A bank is a unit of up to 1,000 songs, which is stored in memory/
portable audio player. “Banking” refers to the grouping of songs
available in USB Memory/portable audio player, in banks of
1,000 songs each. However, when a USB Memory is connected,
1BANK can store up to 1,000 songs under the following
conditions. Otherwise, the number of songs that can be stored
may be less than 1,000.
Conditions (general estimate values)
Playlists: 20 (32 characters; 64 bytes)
Genres: 10 (32 characters; 64 bytes)
Composers: 30 (32 characters; 64 bytes)
Artists: 30 (32 characters; 64 bytes)
Albums: 100 (32 characters; 64 bytes)
Titles: 1,000 (32 characters; 64 bytes)
Folders: 100 (32 characters; 64 bytes)
Files: 1,000 (32 characters; 64 bytes)
File Paths: 1,000 (128 characters; 256 bytes)
About Banking
While a bank is being built up, “Banking” is displayed. Banking
occurs whenever a USB Memory device/Portable audio player
is connected or after power to the head unit turns on.
It can take anywhere from a few seconds to up to several
minutes for banking to complete. This depends on the number
of files and folders in USB Memory/Portable audio player.
Order of files while Banking
Files are divided in different Banks according to the time and
hierarchy they are stored into the USB memory, up to 1,000 files
for each Bank.
The order of the files is as follows:
The files in the hierarchy 1 are divided first and the files in other
hierarchies are divided according to the time when its superior
directory folder in hierarchy 1 is stored.
72-EN
3
Hierarchy 1
Hierarchy 2
Touch [
(file).
] or [
] to select the desired track
Returning to the beginning of the current track (file):
Touch [
].
USB Memory
Hierarchy 3
Fast backward:
Touch and hold [
].
Advancing to the beginning of the next track (file):
Touch [
].
Fast forward:
Touch and hold [
].
• Depending on the connected portable audio player, fast-forwarding/
fast-reversing may not be available.
4
To pause playback, touch [
Touching [
MP3/WMA/AAC File
Folder
• If some file or folder is deleted in the USB memory, new file or folder
stored into the USB memory may take the place of the deleted one in
some cases.
Available operations while Banking
• Search functions, such as album search or tag information
(artist display, etc.) are available during the banking process.
However, during such time, tag information display changes.
• Regular fast-forwarding and next song selection is available.
• During Banking, the played back song order may differ from
the song order in USB memory/Portable audio player.
This unit has the BANK function that automatically divides every 1,000
songs stored in USB memory/Portable audio player into individual
banks to make searching and playing back a song easier. A maximum of
1,000 songs for one bank can be stored according to the order stored in
USB memory/Portable audio player. A maximum of 20 banks (20,000
songs) can be recognised. BANK1 (songs 1 to 1,000) is set as the
default. If you want to search beyond 1,000 songs, perform the
following operation to select a different bank.
BANK No.
BANK1
BANK2
...
...
1
2
Song number
1~1,000
1,001~2,000
BANK20
19,001~20,000
/
/
].
] again will resume playback.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store that are not DRM-Free and files that are copyprotected cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/track name is
displayed.
• ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name, and album name). All other tag data is ignored.
• “No Support” is scroll displayed when text information is not
compatible with this unit.
• Before disconnecting USB memory, be sure to change to another
source or set to pause.
Repeat Play
Only Repeat One is available for this mode.
Repeat One: A single song is repeatedly played back.
Repeat folder: Only files in a folder are repeatedly played back.
1
Touch [P1/2].
The function guide is displayed.
2
Touch [
].
The file will be played repeatedly.
Touch [P1/2] to change the function guide.
When a song is searched by Tag information
Touch BANK [
BANK.
(Repeat One)
] or [
(off)
] to select the desired
When a folder/file is searched by Explorer (File Name)
mode (USB Memory only)
Each operation can be performed in the selected bank.
• Even if the files are contained in the same folder, they may be saved
as different Bank.
(off)
(Repeat One)
(Repeat folder)
Playback
3
1
• You can switch the Band when “Tag” is set in “Setting the USB
Search Mode” (page 43), if the Band is changed, the repeat play
mode will be cancelled.
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
To cancel repeat play, touch [
].
Touch [USB Audio], the USB mode is activated and
the display changes to the USB Audio screen.
73-EN
Random Play Shuffle (M.I.X.)
The Shuffle function of the USB memory or Portable audio player is
displayed as
on the INA-W910R.
1
Touch [
] after touching [P1/2].
The songs will be played back in random sequence.
For example: Searching by Artist name
The following example explains how an Artists search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
Searching by artist name
1
ALL*2
(Shuffle ALL)
(off)
When a folder/file is searched by Explorer (File Name)
mode (USB Memory only)
*3
(Shuffle folders)
ALL*4
(Shuffle ALL)
(off)
* Song shuffle randomly plays back songs within a selected category
(playlist, album, etc.) The songs within the category are played just
once until all songs have been played.
*2 All songs in the current Bank are played back in random sequence.
Any one song does not play back again until all songs have been
played back.
*3 All songs in the current folder are played back in random sequence.
Any one song does not play back again until all songs have been
played back.
*4 All songs in the USB Memory are played back in random sequence.
Any one song does not play back again until all songs have been
played back.
To cancel M.I.X. play, touch [
].
• When a song is played back during Random (M.I.X.) play, the song
can be played back again randomly even if not all songs on the USB
Memory have been played back.
Searching for a desired Song
You can select to search a song by Tag information or Explorer (File
Name) mode. Before you search a song, select your desired search
mode in “Setting the USB Search Mode” (page 43).
Before performing the following procedures, make sure Tag is selected
in “Setting the USB Search Mode” (page 43).
A USB memory or Portable audio player can contain hundreds of songs.
By using file tag information and keeping these songs organized in
playlists, this unit’s search functions will ease song searches.
Each music category has its own individual hierarchy. Use the
Playlists*1/Artists/Albums/Songs/Genres/Composers/Folders/Files
search mode to narrow searches based on the table below.
Hierarchy 1
Hierarchy 2
Hierarchy 3
Hierarchy 4
Playlists*1
Songs
—
—
Artists*
Albums*
Songs
—
Albums*
Songs
—
—
Songs
—
—
—
Genres*
Artists*
Albums*
Songs
Composers*
Albums*
Songs
—
Folders
Files
—
—
Files
—
—
—
search is not available when a Portable audio player is
connected.
74-EN
2
Touch [
] for at least 2 seconds will return to last search mode.
] of Artists.
The Artists search screen is displayed.
3
Select the desired artist.
1 Touch [
] next to the artist’s name.
All songs of the selected artist are played back.
To search for the album of an artist
1 Touch [
] of the selected artist.
The Albums search screen of the selected artist is displayed.
2 Touch [
] next to the desired album’s name.
All songs of the selected album are played back.
To search for a song in the album of an artist
1 Touch [
] of the desired album in “To search for the album
of an artist” in step 2.
The Songs search screen of the selected album is displayed.
2 Touch [
] next to the desired song’s name.
The selected song is played back.
Searching by Explorer (File Name) mode
(USB Memory only)
Before performing the following procedures, make sure File Name is
selected in “Setting the USB Search Mode” (page 43).
A USB Memory can contain hundreds of songs. By folder/file name
searching, you can quickly find a desired folder/file. This operation is
similar to searching a folder/file from PC.
1
Searching by Tag information
*1 Playlist
• Touching [
To play back the artist directly
1
2
].
The search mode is activated, and the search list screen
appears.
When a song is searched by Tag information
*1
(Shuffle Songs)
Touch [
Touch [
].
The search mode is activated, and the search list screen
appears.
2
Touch [
] to enter the selected folder or touch
[
] to play back the selected file.
Touch [
the folder.
3
] of the selected folder to play back all songs in
Repeat step 2 until the desired folder/file is found
when a folder is entered.
• When a portable audio player is connected, even though File Name is
set in “Setting the USB Search Mode” (page 43), the Tag information
search mode will be applied.
• When search is made during M.I.X. play, the M.I.X. play mode will be
cancelled.
• While in the search mode, you can scroll the list one page at a time by
touching [ ] or [ ].
• While in the search mode, you can jump to an assigned position by
touching the direct search bar for quick search. For details, refer to
“Direct Search Function” (page 78).
• After touching [
] of ALL in the Tag search mode will play back
all songs in the list when you are in a hierarchy with an asterisk “*”
(see table on the previous page).
• Touching [
] of ALL in the Tag search mode will display the
search list in the next hierarchy.
• In the Tag search mode, a search can be made quickly by Alphabet
skip function to find the desired artist or song, etc. For details, refer
to “Alphabet Skip Function (Tag search mode only)” on page 75.
Selecting Playlist/Artist/Album/Genre/
Composer (Tag search mode only)
Playlist*/Artist/Album/Genre/Composer can be easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
Touch [ ] or [ ] to select the desired
(Artist) /
(Album) /
(Genre) /
(Playlist) /
(Composer).
* This item is invalid when a portable audio player is connected.
Alphabet Skip Function (Tag search
mode only)
• If search selection mode is not activated, a Song search is not
possible.
• If an album is selected from an artist search, the album can be
searched.
• During shuffle (M.I.X.) playback, this operation is not possible.
The unit is provided with a alphabet skip function for effective
searching. When you use this function in the search mode, you can
quickly search an artist or a song, etc.
Alphabet skip function:
The alphabet skip function is skipped
to the next alphabet such as from A to
B, B to C by pressing ALPHABET
[ ]. You can also skip in reverse
order such as from B to A by pressing
ALPHABET [ ].
Display example for Albums search screen
Select the desired Folder (Folder up/
down)
If you listen to a file from a selected folder, the folder can be changed.
Touch
[
] or [
] to select the folder.
• During M.I.X. ALL playback, this operation is not possible.
• When Folder up/down is made during M.I.X. Folder play, the M.I.X.
Folder play mode will be cancelled.
Creating the playlist from the Artist/
Album information of the current song
(Tag search mode only)
When a song is played back, a playlist about all the songs with the same
Artist or Album stored in the USB memory or Portable audio player can
be created.
1
Displays the current search mode.
Scroll the list one line at a time by touching [ ] or [
Skip the list one page at a time by touching [ ] or [
Touching and holding [ ] or [ ], the display
continuously changes.
Skip the list one alphabet at a time by touching
ALPHABET [ ] or [ ].
Touch [
] to return to the previous menu.
Touch [P1/2] when a song is played back.
The function guide changes.
].
].
2
Touch [X-RPT ARTIST] or [X-RPT ALBUM] to
create the playlist.
• According to the artist/album information of the current song, a
playlist about all the songs with the same artist/album of the BANK
are made into a playlist, which then starts to play back.
• The alphabet select object is only the alphabet that is recorded by
UTF-16 character code.
75-EN
About MP3/WMA/AAC File of USB
Memory
Playing back MP3/WMA/AAC
MP3/WMA/AAC files are prepared, then stored to a USB
memory. A media player or jukebox can also be used to sync
music to a portable device. Do not make a file’s playback time
more than 1 hour.
Media supported
This device can play back USB memory/Portable audio player
media.
Corresponding File Systems
This device supports FAT 12/16/32 for USB memory device/
Portable audio player.
iPod/iPhone
(Optional)
Connecting an iPod/iPhone
An iPod/iPhone can be connected to this unit, by using the USB
connection cable. When an iPod/iPhone is connected to this unit, you
can choose to control the iPod/iPhone using its own controls or by the
head unit controls. For details, refer to “Setting the iPod Control”
(page 77).
The Owner’s Manual only introduces on how to control an iPod/iPhone
via this unit. So before the following operation, make sure to set HU
mode in “Setting the iPod Control” (page 77). On how to control an
iPod/iPhone on itself, refer to Owner’s Manual of iPod/iPhone.
• Other applications (Internet function, etc.) of the iPod touch
or iPhone are not controllable from the unit; however, these
functions can be controlled from the iPod touch or iPhone
itself.
• If you connect an iPhone to this unit, it can be used as an
iPod.
• To watch the video screen of the file from iPod/iPhone
(iPhone, iPod touch, iPod classic, iPod 5th generation, iPod
nano (3rd generation), iPod nano (4th generation) and iPod
nano (5th generation)), using the USB connection and the
Parking Brake must be engaged, set “AUX2 IN” to “iPod
Video” in “Setting the AUX Mode” (page 48).
• For automatic transmission vehicles, place the transmission lever in
the Park position.
iPod/iPhone models usable with this unit
• Confirmed devices regarding Made for iPod.
Correct function of earlier versions cannot be guaranteed.
iPod touch (4th generation): Ver.4.2.1
iPod nano (6th generation): Ver.1.0
iPod touch (3rd generation): Ver.4.2.1
iPod nano (5th generation): Ver.1.0.2
iPod classic (Late 2009): Ver.2.0.4
iPod touch (2nd generation): Ver.4.2.1
iPod nano (4th generation): Ver.1.0.4
iPod classic (120 GB): Ver.2.0.1
iPod touch (1st generation): Ver.3.1.3
iPod nano (3rd generation): Ver.1.1.3 PC
iPod classic (80 GB, 160 GB): Ver.1.1.2
iPod nano (2nd generation): Ver.1.1.3
iPod (5th generation): Ver.1.3
iPod nano (1st generation): Ver.1.3.1
• Confirmed devices regarding Made for iPhone.
Correct function of earlier versions cannot be guaranteed.
iPhone 4: Ver.4.2.1
iPhone 3GS: Ver.4.2.1
iPhone 3G: Ver.4.2.1
iPhone: Ver.3.1.3
• For clarity in identifying your model of iPod, please see
Apple’s own document “Identifying iPod models” at
http://support.apple.com/kb/HT1353.
76-EN
Setting the iPod Control
When an iPod/iPhone is connected, operate it from its own controls or
from the head unit.
1
Touch and hold [
iPod mode screen.
] for at least 2 seconds on the
“iPod mode” indicator appears on the screen.
2
In the iPod mode screen, touching and holding
[
] again will switch to the HU mode.
• If a song is playing on the iPod/iPhone when it is connected to this
unit, it will continue playing after the connection.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to this
unit. Therefore, a maximum of 250 characters is recommended. The
maximum number of characters for the head unit is 128 (128 byte).
• Some characters may not be correctly displayed.
• “No Support” is displayed when text information is not compatible
with the this unit.
• If an iPhone or a video-compatible iPod is connected, touching
[WIDE] on the function guide will change the display mode. For
operation, refer to “Switching Display Modes” (page 37).
• An episode may have several chapters. The chapter can be changed
] or [
].
by pressing [
“HU mode” indicator appears on the screen.
For “HU mode”: Operate the iPod/iPhone via this unit.
For “iPod mode”: Operate the iPod/iPhone using its own
controls. When iPod is selected, some functions will not be
operable via the head unit.
• Once the control mode is changed, this will set pause status. Touch
[ / ] to continue.
• When using the iPod control mode, make sure the USB 30P cable is
connected to the iPod(V)/AUX Input Connector correctly by using the
AV extension cable.
• In the iPod control mode, if nothing is played back by the iPod,
“Stop” will be displayed on this unit.
• Depending upon the iPod used, iPod control may not be selectable.
Or, if iPod is selected, operation must still be from the head unit.
Searching for a desired Song
An iPod/iPhone can contain hundreds of songs. By keeping these songs
organized in playlists, this unit can use these to ease song searches.
Using the search mode’s individual hierarchy, you can narrow down
your search as shown in the table below.
<MUSIC Search Menu>
Playback
1
Press SOURCE/
on the unit.
The Source Select screen is displayed.
2
Touch [iPod].
The display shows the iPod mode screen.
3
Touch [
] or [
] to select the desired song.
Return to the beginning of the current song:
Touch [
].
Fast backward the current song:
Touch and hold [
].
Advance to the beginning of the next song:
Touch [
].
Fast forward the current song:
Touch and hold [
].
4
To pause playback, touch [
Touching [
/
/
].
] again will resume playback.
Hierarchy 1
Hierarchy 2
Hierarchy 3
Hierarchy 4
Playlists
Songs
—
—
Artists*
Albums*
Songs
—
Albums*
Songs
—
—
Songs
—
—
—
Podcasts
Episodes
—
—
Genres*
Artists*
Albums*
Songs
Composers*
Albums*
Songs
—
Audiobooks
—
—
—
• Video search mode depends on the iPod/iPhone. If the specification
of the iPod/iPhone is changed, the search mode on this unit will also
be changed.
For example: Searching by Artist name
The following example explains how an Artist search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
Searching by artist name
1
Touch [
].
The search mode is activated, and the search list screen
appears.
• Touching and holding [
] for at least 2 seconds will return to last
search mode.
• This function is unavailable when iPod mode is selected in “Setting
the iPod Control” (page 77).
2
Touch [
] of Music.
The Music search menu screen is displayed.
77-EN
• If Video mode is selected, the Video playlists/Movies/Music Videos/
TV Shows/Video Podcasts search mode may be used depending on
the connected iPod/iPhone (Only for iPhone or iPod compatible
Video).
• If you want to select Video search mode, set AUX2 IN to iPod Video in
advance. Refer to “Setting the AUX Mode” on page 48.
3
Touch [
] of Artists.
The Artist search screen is displayed.
4
Direct Search Function
The unit’s direct search function can be used to search for an album,
song, etc., more efficiently. In Playlists/Artists/Albums/Songs/Genres/
Composers/Podcasts/Audiobooks mode, you can quickly target any
song.
Display example for Albums search screen
Select the desired artist.
To play back the artist directly
1 Touch [
] next to the artist’s name.
All songs of the selected artist are played back.
To search for the album of an artist
1 Touch [
] of the selected artist.
The Album search screen of the selected artist is displayed.
2 Touch [
] next to the desired album’s name.
All songs of the selected album are played back.
To search for a song in the album of an artist
1 Touch [
] of the desired album in “To search for the album
of an artist” in step 2.
The Song search screen of the selected album is displayed.
2 Touch [
] next to the desired song’s name.
The selected song is played back.
• Touching [
] of ALL will play back all songs in the list when you
are in a hierarchy with an asterisk “*” (see table on the previous
page).
• Touching [
] of ALL will display the search list in the next
hierarchy.
• In search mode, you can jump to an assigned position by touching the
direct search bar for quick search. For details, refer to “Direct
Search Function” (page 78).
• If Alphabet Skip Function is activated in the search mode, a search
can be made quickly by Alphabet skip function to find the desired
artist or song, etc. For details, refer to “Alphabet Skip Function” on
page 78.
• When search is made during M.I.X. play, the M.I.X. play mode will be
cancelled.
• In search mode, touch [
] to return to the previous menu.
• In search mode, touch [Exit] to return to iPod main screen.
78-EN
Direct search bar
Returns to the previous screen.
Touching [Exit] will turn off the search screen, and return
to main screen.
In search mode, touch anywhere on the Direct search bar
to step through items. The search list display also
changes according to the selected song position.
Alphabet Skip Function
The unit is provided with a alphabet skip function for effective
searching. When you use this function in the search mode, you can
quickly search an artist or a song, etc.
Alphabet skip function:
The alphabet skip function is skipped
to the next alphabet such as from A to
B, B to C by pressing ALPHABET
[ ]. You can also skip in reverse
order such as from B to A by pressing
ALPHABET [ ].
Display example for Albums search screen
Random Play Shuffle (M.I.X.)
The Shuffle function of the iPod is displayed as
INA-W910R.
Shuffle ALL
on the
ALL:
All songs in the iPod are played back in random sequence. Any
one song does not play back again until all songs have been
played back.
Shuffle Albums
:
The songs on each album are played back in proper order. Upon
completing of all the songs on the album, the next album is
selected randomly. This continues until all albums have been
played.
Shuffle Songs
Displays the current search mode.
Scroll the list one line at a time by touching [ ] or [
Skip the list one page at a time by touching [ ] or [
Touching and holding [ ] or [ ], the display
continuously changes.
Skip the list one alphabet at a time by touching
ALPHABET [ ] or [ ].
Touch [
] to return to the previous screen.
].
].
1
Press [ ] or [ ] to select the desired
(Artist) /
(Album) /
(Genre) /
(Episode) / Category*.
(Playlist) /
(Composer) /
Touch [
ALL]*.
The songs will be played back in random sequence.
ALL
(Shuffle ALL)
Touch [
Selecting Playlist/Artist/Album/Genre/
Composer/Episode/Category
Playlist/Artist/Album/Genre/Composer/Episode/Category* can be
easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
:
Song shuffle randomly plays back songs within a selected
category (playlist, album, etc.). The songs within the category
are played just once until all songs have been played.
(off)
] after touching [P1/2].
(off)
(Shuffle Albums)
2
(Shuffle Songs)
To cancel M.I.X. play, touch [
ALL] or [
].
• For details of the search mode, refer to “Searching for a desired
Song” (page 77).
• If a song is selected in the album search mode before selecting
Shuffle (M.I.X.), the songs will not play back randomly even when
Shuffle album is selected.
* This operation cannot be performed for the video files of
iPod/iPhone.
* Category can be changed only when playback the video files of
iPod/iPhone.
• If search selection mode is not activated, a Song search is not
possible.
• During shuffle (M.I.X.) playback, this operation is not possible.
• If Playlist/Artist/Album/Genre/Composer/Episode are not searched,
this operation is not possible.
• If an album is selected from an artist search, the album can be
searched.
• This function is unavailable when iPod mode is selected in “Setting
the iPod Control” (page 77).
Repeat Play
Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
Touch [P1/2].
The function guide is displayed.
2
Touch [
].
The file will be played repeatedly.
(Repeat One)
3
To cancel repeat play, touch [
(off)
(Repeat the list
being played back)
].
• Depending on the connected iPod, track up/down may be not
available during Repeat play.
79-EN
Remote Control
Controls on Remote Control
Button
Radio mode: SEEK (DN) button
CD/Changer mode:
Press the button to go back to the beginning
of the current track. Press and hold to fast
reverse.
MP3/WMA/AAC iPod mode:
Press the button to go back to the beginning
of the current file. Press and hold to fast
reverse.
DVD Video/Video CD/DivX:
• Move to the desired position on the disc.
• During playback, press and hold for
more than 1 second to reverse the disc
at double speed. Hold for more than 5
seconds to reverse the disc at 8 times
the normal speed. Hold for more than 10
seconds to reverse the disc at 21 times
the normal speed.
DVD Video:
• When pressed and held in while in the
pause mode, the disc is played in
reverse slow motion at 1/8th the normal
speed. When held in for 5 more
seconds, the reverse slow motion speed
switches to 1/2 the normal speed.
• The picture is reversed by one frame
each time the button is pressed in the
pause mode.
/
Button
Radio mode:
Chooses the tuning mode.
By pressing it more than 2 seconds,
Automatic Memory will be operated.
Disc/iPod mode: Switches between play and pause.
• SEARCH Button: Not used.
PWR Button
Turns the power ON and OFF.
SRC Button
Selects the audio source.
DN Button
Radio mode: Selects, in descending order, stations
programmed into the radio’s presets.
MP3/WMA/AAC/DivX mode:
Folder Select (DN) Button selects the folder.
Changer mode:
DISC Select (DN) Button selects a disc in
descending order.
iPod/iPhone Selects playlist/artist/album/genre/composer/
mode:
episode in descending order.
VOLUME
/
Button
Increase or decreases the volume level.
RETURN Button
DVD/Video CD (PBC ON)/DivX mode:
Returns to the previous display. (Does not
return in some discs.)
80-EN
Button
Performs stop.
DVD Video/Video CD/DivX:
Pressing once stops the PRE stop; Pressing twice
sets stop.
MENU Button
DVD Video mode:
Shows the menu display.
CLR Button
Delete the previous number on numeric keypad or close the
numeric keypad screen.
DISP/TOP M. Button
DVD Video/Video CD mode:
Shows playback status (only when car is
stopped).
DVD Video mode:
By pressing more than 2 seconds, shows the
top menu display.
SETUP Button
Not used.
AUDIO Button
DVD Video/Video CD/DivX mode: Switches audio.
BAND Button
Radio mode: Changes the band.
Changer mode: Switches the disc mode.
(when an optional KCA-410C is connected)
DVD Video/Video CD mode:
While playing a DVD or Video CD, the
display mode is switched (only when car is
stopped).
DVD Video/Video CD:
• When pressed and held in while in the
pause mode, the disc is played in slow
motion at 1/8th the normal speed. When
held in for 5 more seconds, the slow
motion speed switches to 1/2 the normal
speed.
• The picture is forwarded by one frame
each time the button is pressed in the
pause mode.
Numeric Keypad
Inputs numbers.
MONITOR Button
A.PROC Button
Not used.
When an external audio processor is connected:
Press the button to display the audio
processor setting screen.
When an external audio processor is non-connected:
Press the button to display the audio mode
screen.
ANGLE Button
MUTE Button
Lowers the volume by 20 dB instantly. Press the button
again to cancel.
UP Button
Radio mode: Selects, in ascending order, stations
programmed into the radio’s presets.
MP3/WMA/AAC/DivX mode:
Folder Select (UP) Button to selects the
folder.
Changer mode:
DISC Select (UP) Button selects a disc in
ascending order.
iPod/iPhone mode:
Selects a playlist/artist/album/genre/
composer/podcast in ascending order.
,
,
,
DVD Video mode:
Selects an item displayed in the screen.
ENT. Button
Enters the selected item and press the button to confirm
your selection as on the numeric keypad input screen.
DVD Video mode:
Switches the angle of the picture.
SUBTITLE Button
DVD Video/DivX mode:
Switches the subtitle.
• The SETUP operation of the unit cannot be carried out from the
remote control.
• Some operations may not be possible depending on the disc.
When Using the Remote Control
• Point the remote control at the remote sensor within
about 2 metres.
• It may not be possible to operate the remote control if
the remote control sensor is exposed to direct
sunlight.
• The remote control is a small, lightweight precision
device. To avoid damage, short battery life,
operational errors and poor response, observe the
following.
- Do not subject the remote control to excessive
shock.
- Do not put in a trouser pocket.
- Keep away from food, moisture and dirt.
- Do not place in direct sunshine.
Button
Radio mode: SEEK (UP) button
CD/Changer mode:
Press the button to advance to the beginning
of the next track. Press and hold to fast
forward.
MP3/WMA/AAC iPod mode:
Press the button to advance to the beginning
of the next file. Press and hold to fast
forward.
DVD Video/Video CD/DivX:
• Move to the desired position on the disc.
• During playback, press and hold for more
than 1 second to forward the disc at
double speed. Hold for more than 5
seconds to forward the disc at 8 times the
normal speed. Hold for more than 10
seconds to forward the disc at 21 times
the normal speed.
81-EN
Battery Replacement
Information
Battery type: CR2025 battery or equivalent.
1
Opening the battery case
Slide out the battery cover while firmly pressing in the
direction of the arrow.
About DVDs
Music CDs and DVDs have grooves (tracks) in which the digital
data is recorded. The data is represented as microscopic pits
recorded into the track – these pits are read by a laser beam to
play the disc. On DVDs, the density of the tracks and pits is
twice that of CDs, so DVDs can contain more data in less space.
CDs
Minimum pit
length 0.9 µm
1.2 mm
Track pitch 1.6 µm
DVDs
2
Replacing the battery
Put the battery in the case with the (+) indication upward as
shown in the illustration.
Minimum pit
0.6 mm
length 0.6 mm
0.9 µm
Track pitch 0.74 µm
A 12 cm disc can contain one movie or about four hours of
music.
In addition, DVDs provide sharp picture quality with vivid colours
thanks to a horizontal resolution of over 500 lines (compared to less
than 300 for VHS tape).
In addition, DVDs offer a variety of functions.
Multiple audio* (page 31)
Movies can be recorded in up to eight languages. The desired
language can be selected from the unit.
• Placing a battery in backwards way may cause a malfunction.
3
Closing the cover
Slide the cover as illustrated until a click is heard.
Subtitles function* (page 32)
Movies can include subtitles in up to 32 languages. The desired
subtitle language can be selected from the unit.
Multi angle function* (page 31)
When the DVD contains a movie shot from multiple angles, the
desired angle can be selected from the unit.
Multi story function*
With this function, a single movie includes various story lines.
You can select different story lines to view various versions of the
same movie.
Operation differs from disc to disc. Story line selection screens
including instructions appear during the movie. Just follow the
instructions.
Warning
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention should
only be performed after coming to a complete stop. Always
stop the vehicle in a safe location before performing these
functions. Failure to do so may result in an accident.
82-EN
* The functions audio languages, subtitle languages, angles, etc., differ
from disc to disc. For details, refer to the disc’s instructions.
Terminology
Dolby Digital
Dolby Digital is a digital audio compression technology
developed by Dolby Laboratories that allows large quantities of
audio data to be efficiently recorded on discs. It is compatible
with audio signals from mono (1 channel) all the way up to 5.1channel surround sound. The signals for the different channels
are completely independent, and since the sound is high quality
digital there is no loss of sound quality.
Dolby Pro Logic II
Dolby Pro Logic II plays 2-channel sources in 5 channels over
the entire frequency range.
This is done with an advance, high sound quality matrix
surround decoder which draws out the spatial properties of the
original recording without adding any sounds to or changing the
sound of the source.
* The separately sold digital audio processor (PXA-H700, etc.) is
required to enjoy Dolby Pro Logic II surround sound.
Linear PCM audio (LPCM)
LPCM is a signal recording format used for music CDs. Whereas
music CDs are recorded at 44.1 kHz/16 bits, DVDs are recorded
at 48 kHz/16 bits to 96 kHz/24 bits, thereby achieving higher
sound quality than music CDs.
Rating levels (parental lock)
Centre
speaker
Front
speakers
This is a function of the DVD for restricting the viewing age as
stipulated by laws in different countries. The way in which
viewing is restricted differs from DVD to DVD. Sometimes the
DVD cannot be played at all, other times certain scenes are
skipped, and other times certain scenes are replaced with other
scenes.
Rear
speakers
Subwoofer
Speaker layout for enjoying
Dolby Digital sound/DTS sound
DTS
This is a home-use digital sound format of the DTS Sound
System. This is a high quality sound system, developed by DTS,
Inc. for use in movie theatres.
DTS has six independent sound tracks. The theatre presentation
is fully realised in the home and other settings. DTS is the
abbreviation for Digital Theatre System.
* To enjoy DTS surround sound you need the separately sold DTS
digital audio processor (PXA-H700, etc.). The DVD video software
must also have a DTS sound track.
The INA-W910R has a built-in DTS 2-channel audio decoder.
Analogue audio outputs are available.
83-EN
List of Language Codes
(For details, see page 39.)
Abbreviation
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DE
DZ
EL
EN
EO
ES
ET
EU
FA
FI
FJ
FO
FR
FY
GA
GD
GL
GN
GU
HA
HI
HR
HU
HY
IA
84-EN
Code
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Abbreviation
IE
IK
IN
IS
IT
IW
JP
JI
JW
KA
KK
KL
KM
KN
KO
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MS
MT
MY
NA
NE
NL
NO
OC
OM
OR
PA
PL
PS
PT
QU
RM
Code
7369
7375
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
8083
8084
8185
8277
Language
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
Abbreviation
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SE
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
CN
ZU
Code
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
8378
8379
8381
8382
8383
8384
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Language
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese
Zulu
List of Country Codes
(For details, see page 39.)
Abbreviation
AD
AE
AF
AG
AI
AL
AM
AN
AO
AQ
AR
AS
AT
AU
AW
AZ
BA
BB
BD
BE
BF
BG
BH
BI
BJ
BM
BN
BO
BR
BS
BT
BV
BW
BY
BZ
CA
CC
CD
Code
6568
6569
6570
6571
6573
6576
6577
6578
6579
6581
6582
6583
6584
6585
6587
6590
6665
6666
6668
6669
6670
6671
6672
6673
6674
6677
6678
6679
6682
6683
6684
6686
6687
6689
6690
6765
6767
6768
CF
CG
CH
CI
CK
CL
CM
CN
CO
CR
CU
CV
CX
CY
CZ
DE
DJ
DK
6770
6771
6772
6773
6775
6776
6777
6778
6779
6782
6785
6786
6788
6789
6790
6869
6874
6875
Abbreviation
Country
DM
Andorra
DO
United Arab Emirates
DZ
Afghanistan
Antigua and Barbuda
EC
EE
Anguilla
EG
Albania
Armenia
EH
ER
Netherlands Antilles
ES
Angola
Antarctica
ET
FI
Argentina
FJ
American Samoa
Austria
FK
FM
Australia
FO
Aruba
Azerbaijan
FR
GA
Bosnia and Herzegovina
GB
Barbados
Bangladesh
GD
GE
Belgium
GF
Burkina Faso
Bulgaria
GH
GI
Bahrain
GL
Burundi
Benin
GM
GN
Bermuda
GP
Brunei Darussalam
Bolivia
GQ
GR
Brazil
GS
Bahamas
Bhutan
Bouvet Island
GT
Botswana
GU
Belarus
GW
Belize
GY
Canada
HK
Cocos (Keeling) Islands
HM
Congo, the Democratic
Republic of the
HN
Central African Republic
HR
Congo
HT
Switzerland
HU
Cote d’lvoire
ID
Cook Islands
IE
Chile
IL
Cameroon
IN
China
IO
Colombia
IQ
Costa Rica
IR
Cuba
IS
Cape Verde
IT
Christmas Island
JM
Cyprus
JO
Czech Republic
JP
Germany
KE
Djibouti
KG
Denmark
KH
Code
6877
6879
6890
6967
6969
6971
6972
6982
6983
6984
7073
7074
7075
7077
7079
7082
7165
7166
7168
7169
7170
7172
7173
7176
7177
7178
7180
7181
7182
7183
7184
7185
7187
7189
7275
7277
7278
7282
7284
7285
7368
7369
7376
7378
7379
7381
7382
7383
7384
7477
7479
7480
7569
7571
7572
Country
Abbreviation
KI
Dominica
KM
Dominican Republic
KN
Algeria
KP
Ecuador
Estonia
KR
Egypt
KW
Western Sahara
KY
Eritrea
KZ
Spain
LA
Ethiopia
Finland
LB
Fiji
LC
Falkland Islands
Micronesia, Federated States of
LI
Faroe Islands
LK
France
LR
Gabon
LS
United Kingdom
LT
Grenada
LU
Georgia
LV
French Guiana
LY
Ghana
MA
Gibraltar
MC
Greenland
MD
Gambia
MG
Guinea
MH
Guadeloupe
MK
Equatorial Guinea
ML
Greece
MM
South Georgia and the
South Sandwich Islands
MN
MO
Guatemala
MP
Guam
MQ
Guinea-Bissau
MR
Guyana
MS
Hong Kong
MT
Heard Island and
MU
McDonald Islands
MV
Honduras
MW
Croatia
MX
Haiti
MY
Hungary
MZ
Indonesia
NA
Ireland
NC
Israel
NE
India
NF
British Indian Ocean Territory
NG
Iraq
NI
Iran, Islamic Republic of
NL
Iceland
NO
Italy
NP
Jamaica
NR
Jordan
NU
Japan
NZ
Kenya
OM
Kyrgyzstan
PA
Cambodia
Code
7573
7577
7578
7580
Country
Kiribati
Comoros
Saint Kitts and Nevis
Korea, Democratic
People’s Republic of
7582
7587
7589
7590
7665
Korea, Republic of
Kuwait
Cayman Islands
Kazakstan
Lao People’s
Democratic Republic
7666
7667
7673
7675
7682
7683
7684
7685
7686
7689
7765
7767
7768
7771
7772
7775
Lebanon
Saint Lucia
Liechtenstein
Sri Lanka
Liberia
Lesotho
Lithuania
Luxembourg
Latvia
Libyan Arab Jamahiriya
Morocco
Monaco
Moldova, Republic of
Madagascar
Marshall Islands
Macedonia, The former
Yugoslav Republic of
Mali
Myanmar
Mongolia
Macau
Northern Mariana Islands
Martinique
Mauritania
Montserrat
Malta
Mauritius
Maldives
Malawi
Mexico
Malaysia
Mozambique
Namibia
New Caledonia
Niger
Norfolk Island
Nigeria
Nicaragua
Netherlands
Norway
Nepal
Nauru
Niue
New Zealand
Oman
Panama
7776
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7865
7867
7869
7870
7871
7873
7876
7879
7880
7882
7885
7890
7977
8065
85-EN
Abbreviation
PE
PF
PG
PH
PK
PL
PM
PN
PR
PT
PW
PY
QA
RE
RO
RU
RW
SA
SB
SC
SD
SE
SG
SH
SI
86-EN
Code
8069
8070
8071
8072
8075
8076
8077
8078
8082
8084
8087
8089
8165
8269
8279
8285
8287
8365
8366
8367
8368
8369
8371
8372
8373
Country
Abbreviation
Peru
SJ
French Polynesia
SK
Papua New Guinea
SL
Philippines
SM
Pakistan
SN
Poland
SO
Saint Pierre and Miquelon
SR
Pitcairn
ST
Puerto Rico
SV
Portugal
SY
Palau
SZ
Paraguay
TC
Qatar
TD
Reunion
TF
Romania
TG
Russian Federation
TH
Rwanda
TJ
Saudi Arabia
TK
Solomon Islands
TM
Seychelles
TN
Sudan
TO
Sweden
TP
Singapore
TR
Saint Helena
TT
Slovenia
TV
Code
8374
8375
8376
8377
8378
8379
8382
8384
8386
8389
8390
8467
8468
8470
8471
8472
8474
8475
8477
8478
8479
8480
8482
8484
8486
Country
Abbreviation
Svalbard and Jan Mayen
TW
Slovakia
TZ
Sierra Leone
UA
San Marino
UG
Senegal
UM
Somalia
US
Suriname
UY
Sao Tome and Principe
UZ
El Salvador
VA
Syrian Arab Republic
VC
Swaziland
Turks and Caicos Islands
VE
Chad
VG
French Southern Territories
VI
Togo
VN
Thailand
VU
Tajikistan
WF
Tokelau
WS
Turkmenistan
YE
Tunisia
YT
Tonga
YU
East Timor
ZA
Turkey
ZM
Trinidad and Tobago
ZW
Tuvalu
Code
8487
8490
8565
8571
8577
8583
8589
8590
8665
8667
8669
8671
8673
8678
8685
8770
8783
8969
8984
8985
9065
9077
9087
Country
Taiwan, Province of China
Tanzania, United Republic of
Ukraine
Uganda
United States Minor
Outlying Islands
United States
Uruguay
Uzbekistan
Holy See (Vatican City State)
Saint Vincent and the
Grenadines
Venezuela
Virgin Island, British
Virgin Islands, U.S
Viet Nam
Vanuatu
Wallis and Futuna
Samoa
Yemen
Mayotte
Yugoslavia
South Africa
Zambia
Zimbabwe
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again.
If the unit is still not functioning normally, please review the items
in the following checklist. This guide will help you isolate the
problem if the unit is at fault. Otherwise, make sure the rest of your
system is properly connected, or then consult your authorized
Alpine dealer.
Basic
No function or display.
• Vehicle’s ignition is off.
- If connected according to the instructions, the unit will not
operate with the vehicle’s ignition off.
• Improper power lead connections.
- Check power lead connections.
• Blown fuse.
- Check the fuse on the battery lead of the unit; replace with the
proper value if necessary.
• Internal micro-computer malfunctioned due to interference
noise, etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
• Display OFF mode is activated.
- Cancel Display OFF mode.
No sound or unnatural sound.
• Incorrect setting of volume/balance/fader controls.
- Readjust the controls.
• Connections are not properly or securely made.
- Check the connections and firmly connect.
Screen not displayed.
• Brightness control is set at the minimum position.
- Adjust the Brightness control.
• Temperature in the vehicle is too low.
- Increase the vehicle’s interior temperature to operation
temperature range.
• Connections to the DVD, CD player are not securely made.
- Check the connections and firmly connect.
Movement of displayed picture is abnormal.
• Temperature in the vehicle is too high.
- Allow the vehicle’s interior temperature to cool.
Unclear or noisy display.
• TFT-LCD MODULE is worn out.
- Replace the TFT-LCD MODULE.
The remote control is inoperative.
• The remote control sensor setting of “Rear Entertainment
Function” is not set to this unit.
- Set for this unit.
Navigation
The vehicle’s position is erroneous.
• The GPS reception is poor.
- Drive the vehicle in an area of good GPS reception to allow the
unit to recalibrate itself. Move to a location where strong GPS
reception is possible.
No operation
• Moisture condensation
- Allow enough time for the condensation to evaporate (about 1 hour).
• Ambient Temperature
- Make sure the temperature inside the vehicle is between 0°C
and 45°C (32°F and 113°F).
Radio
Unable to receive stations.
• No antenna, or open connection in the antenna cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
• The station signal is weak and noisy.
- If above solution does not work, tune in another station.
CD/MP3/WMA/AAC/DVD/Video CD
Disc playback sound is wavering.
• Moisture condensation in the disc Module.
- Allow enough time for the condensation to evaporate (about 1
hour).
Disc insertion not possible.
• A disc is already in the DVD player.
- Eject the disc and remove it.
• The disc is being improperly inserted.
- Make sure the disc is being inserted following the instructions
in the CD/MP3/WMA/AAC, DVD/Video CD Player Operation
section.
87-EN
Disc ejection not possible.
• There is dust in the DVD Player.
- After touching [Eject] of Disc on the Eject/Tilt screen, insert
another disc into the Disc Slot*. A part of the blocked disc will
be ejected, and then pull the disc out.
* Insert the disc as the Disc Slot space allows, and stop inserting while
an obstacle occurs. Do not force it into the slot to avoid a
malfunction.
If the above mentioned solution does not solve the problem,
consult your nearest Alpine dealer.
Unable to fast forward or backward the disc.
• The disc has been damaged.
- Eject the disc and discard it; using a damaged disc in your unit
can cause damage to the mechanism.
Disc playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• Disc is very dirty.
- Clean the disc.
• Disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercial available lens cleaner disc. Consult
your nearest Alpine dealer.
Disc playback sound skips without vibration.
• Dirty or scratched disc.
- Clean the disc; damaged disc should be replaced.
CD-R/CD-RW playback not possible.
• Close session (finalisation) has not been performed.
- Perform finalisation and attempt playback again.
Error displays.
• Mechanical error.
- Touch [Eject] of Disc on the Eject/Tilt screen. After the error
indication disappears, insert the disc again. If the abovementioned solution does not solve the problem, consult your
nearest Alpine dealer.
MP3/WMA/AAC is not played back.
• Writing error occurred. The CD format is not compatible.
- Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA/AAC” (pages 24 and 25), then
rewrite in the format supported by this device.
Unit does not operate.
• Monitor’s power is not turned on.
- Turn on the monitor’s power.
• Condensation.
- Wait a while (about 1 hour) for the condensation to dry.
88-EN
No picture is produced.
• Monitor’s mode is not switched to the mode you want to see.
- Switch to the mode you want to see.
• Monitor’s parking brake lead is not connected.
- Connect the monitor’s parking brake wire and set the parking
brake.
(For details, refer to the monitor’s instructions.)
Playback does not start.
• Disc is loaded upside-down.
- Check the disc and load it with the labelled side facing upward.
• Disc is dirty.
- Clean the disc.
• A disc not able to play back with this unit is loaded.
- Check if the disc is able to be played back.
• Parental lock is set.
- Cancel the parental lock or change the rating level.
Picture is unclear or noisy.
• Disc is being fast-forwarded or fast-reversed.
- The picture may be slightly disturbed, but this is normal.
• Vehicle’s battery power is weak.
- Check the battery power and wiring.
(The unit may malfunction if the battery power is under 11
volts with a load applied.)
Image stops sometimes.
• Disc is scratched.
- Replaced with a non-scratched disc.
Playing back a DRM protected DivX® File
Some operations cannot be performed while displaying the
following message.
“Authorization Error This player is not authorized to play
this video.”
• If an unauthorized DRM protected DivX® file is played back,
the following message is displayed for 2 seconds:
“Authorization Error This player is not authorized to play this
video”. This means the file’s registration code does not match
the player’s and cannot be played back. After the message has
been displayed, the beginning of the next file will automatically
begin playing.
“Rental expired”
• A DivX® rental is set for a fixed number of viewings. If viewing
time has counted down to 0, “Rental expired” is displayed for 2
seconds. This indicates that the file can no longer be played.
After the message has been displayed, the beginning of the next
file will automatically begin playing.
“Rental Countdown OK?”
• While playing back a rental file, if B.SKIP or ENTER is selected
in the file selection menu, “Rental Countdown OK?” is
displayed. The rental file playback is interrupted (viewing time
is reduced by 1). To confirm stopping playback, touch [Yes], or
touch [No] to continue playing the file.
“View DivX® VOD Rental
This rental has (remaining times) views left.
Do you want to use one of your (remaining times) views
now?”
• If audio/visual times still remain, the remaining number of
playback times is displayed. To play back, touch [Yes]. If the
next file is to be played back, touch [No].
Indication for CD/MP3/WMA/AAC
Indication for DVD/Video CD
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “No Disc” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press
for at least 3 seconds.
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “No Disc” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press
for at least 3 seconds.
• Button operation on the unit or remote control is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
• Mechanism error.
1) Touch [Eject] of Disc on the Eject/Tilt screen and eject the
disc. If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, touch
[Eject] of Disc on the Eject/Tilt screen again.
If the error indication still does not turn off after trying to
touch [Eject] of Disc on the Eject/Tilt screen. For a few
times, consult your Alpine dealer.
• Disc was forcibly pulled out by hand during Auto Loading.
- When the error indication remains after loading, try to load
again.
If the error indication still does not turn off after pressing for a
few times, consult your Alpine dealer.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- Touch [Eject] of Disc on the Eject/Tilt screen.
- Change the disc.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
• Mechanism error.
1) Touch [Eject] of Disc on the Eject/Tilt screen and eject the
disc.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, touch
[Eject] of Disc on the Eject/Tilt screen again.
If the error indication still does not turn off after touching
[Eject] of Disc on the Eject/Tilt screen for a few times,
consult your Alpine dealer.
• Disc was forcibly pulled out by hand during Auto Loading.
- When the error indication remains after loading, try to load
again.
If the error indication still does not turn off after pressing for a
few times, consult your Alpine dealer.
• Scratched disc, contaminated disc/poor recording/disc
incompatible with this unit.
- Touch [Eject] of Disc on the Eject/Tilt screen.
- Change the disc.
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
89-EN
Indication for USB Memory/Portable audio player
• The DVD setup operation was attempted when a disc is inserted
in the unit.
- Eject the disc before the DVD setup operation.
(DivX® mode)
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• Database error or decoder error.
- You can solve the problem by reconnecting the USB Memory/
Portable audio player.
• Communication error or boot error, etc.
- You can solve the problem by reconnecting the USB memory/
Portable audio player or changing source.
Indication for CD changer
• The Portable audio player is not verified.
- Change another Portable audio player.
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
• Abnormal current is run to the USB connector device.
- Connect another USB memory/Portable audio player.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject button
and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function. When the
CD Changer finishes the eject function, insert an empty CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
• No indicated disc.
- Choose another disc.
90-EN
• A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
• A USB Memory/Portable audio player is not connected.
- Make sure the USB Memory device is correctly connected and
the cable is not excessively bent.
• No song (file) is stored in the USB Memory/Portable audio
player.
- Connect the USB Memory device/Portable audio player after
storing songs (files).
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
Indication for iPod Mode
• The iPod/iPhone is not connected.
- Make sure the iPod/iPhone is correctly connected (refer to
“Connections”).
Make sure the cable is not bent excessively.
• There are no songs in the iPod/iPhone.
- Download songs to the iPod/iPhone and connect to the
INA-W910R.
• Database error or decoder error.
- You can solve the problem by reconnecting the iPod/iPhone.
• Communication error or boot error, etc.
- You can solve the problem by reconnecting the iPod/iPhone or
changing source.
Specifications
MONITOR SECTION
Screen Size
7.0"
LCD Type
Transparent type TN LCD
Operation System
TFT active matrix
Number of Picture Elements 1,152,000 pcs. (800 × 3 × 480)
Effective Number of Picture Elements
99.99% or more
Illumination System
LED
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
87.5 – 108.0 MHz
8.1 dBf (0.7 µV/75 ohms)
12 dBf (1.1 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
MW TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
531 – 1,602 kHz
25.1 µV/28 dBf
LW TUNER SECTION
• The iPod/iPhone is not verified.
- Change another iPod/iPhone.
Tuning Range
Sensitivity (IEC Standard)
153 – 281 kHz
31.6 µV/30 dBf
NAVIGATION SECTION
• Abnormal current is run to the USB connector device.
- Attempt to connect another iPod/iPhone.
Received Frequency
Receiving Sensitivity
USB SECTION
USB requirements
Max. Power Consumption
USB Class
• A USB device that is not supported by the unit is connected.
- Connect an iPod/iPhone that is supported by the unit.
Indication for BLUETOOTH mode
• The BLUETOOTH device is not connected.
- Connect the BLUETOOTH device.
1.57542 ±1.023MHz
-130dBm
File System
MP3 Decoding
WMA Decoding
AAC Decoding
Number of Channels
Frequency Response*
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
USB 1.1/2.0
500mA
USB (Play From Device)/
USB (Mass Storage Class)
FAT12/16/32
MPEG-1/2 AUDIO Layer-3
Windows Media™ Audio
AAC-LC format “.m4a” file
2-Channel (Stereo)
5-20,000 Hz (±1 dB)
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
* Frequency response may differ depending on the encoder software/
bit rate.
91-EN
BLUETOOTH SECTION
CHASSIS SIZE
BLUETOOTH Specification Bluetooth V2.0
Output Power
+4 dBm Max. (Power class 2)
Profile
HFP (Hands-Free Profile)
HSP (Head Set Profile)
Width
Height
Depth
REMOTE CONTROL
Battery Type
Width
Height
Depth
Weight
CR2025 battery
51 mm (2")
119 mm (4-11/16")
13 mm (1/2")
40 g (1.4 oz) (battery excluded)
178 mm (7")
100 mm (3-15/16")
164.6 mm (6-1/2")
• Due to continuous product improvement, specifications and design
are subject to change without notice.
• The LCD panel is manufactured using an extremely high precision
manufacturing technology. Its effective pixel ratio is over 99.99%.
This means that there is a possibility that 0.01% of the pixels could
be either always ON or OFF.
CD/DVD SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Channel Separation
Signal system
Horizontal resolution
Video output level
Video S/N ratio
Audio S/N ratio
5 – 20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
85 dB (at 1 kHz)
NTSC/PAL
500 lines or greater
1Vp-p (75 ohms)
DVD: 60 dB
105 dB
PICKUP
Wave length
Laser power
DVD: 666 nm
CD: 785 nm
CLASS II
GENERAL
Power Requirement
Operating temperature
Maximum Power Output
Output Voltage
Bass
Treble
Weight
Audio output level
Preout (Front, Rear):
Preout (Subwoofer):
AUX OUT:
Ai-NET:
14.4 V DC
(11–16 V allowable)
+32°F to +113°F
(0°C to + 45°C)
50 W × 4
4,000 mV/10k ohms
±14 dB at 60 Hz
±14 dB at 10 kHz
2.7 kg
(5 lbs. 15 oz)
4V/10k ohms (max.)
4V/10k ohms (max.)
1.2V/10k ohms
850 mV
CAUTION
CLASS 1
LASER PRODUCT
(Bottom side of player)
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
(Bottom side of player)
92-EN
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 7 to 16 of this manual thoroughly for
proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
Warning
MAKE THE CORRECT CONNECTIONS
Failure to make the proper connections may result in fire or product
damage.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Failure to do so may result in electric shock or injury due to
electrical shorts.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, shift lever, brake
pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING
HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT
OF THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
SHIFT LEVER.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number plate is
located on the bottom of the unit.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your INA-W910R. This will reduce any chance of
damage to the unit in case of a short-circuit.
• Be sure to connect the colour coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle’s electrical system.
• When making connections to the vehicle’s electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the INA-W910R to the fuse box, make
sure the fuse for the intended circuit of the
INA-W910R has the appropriate amperage. Failure to do so may
result in damage to the unit and/or the vehicle. When in doubt,
consult your ALPINE dealer.
• The INA-W910R uses female RCA-type jacks for connection to
other units (e.g. amplifier) having RCA connectors. You may
need an adapter to connect other units. If so, please contact your
authorized ALPINE dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.
• The Display must be completely retracted in the casing when
installing. If it is not, problems may occur.
• When installing in automobiles, make sure the Display can open/
close without coming in contact with the shift lever.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
93-EN
3
Installation
Caution
Do not block the unit’s fan or heat sink, thus preventing
air circulation. If blocked, heat will accumulate inside
the unit and may cause a fire.
Air ventilation hole
Remove the mounting sleeve from the main unit (see
“Removal” on page 95).
The unit can be installed in the mounting sleeve in
three positions by aligning its mounting holes (A to
C) on the sides of the unit. Position A will be used in
most cases. If B or C are to be used, the hole
positions need to be modified.
First, determine the mounting position in the
mounting sleeve, then affix the supplied seal (refer
to “How to use a Seal” (page 95)).
Slide the unit into the mounting sleeve and secure it.
• If B or C is used, make sure that there is a enough space depthwise
before installing the unit. If the unit is forcibly pushed into the
mounting sleeve, damage may occur.
Mounting Sleeve
(Included)
Dashboard
Rear of the Unit
Rubber Cap (Included)
This unit
Bracket
Caution concerning the installation location
1
Before installing, make sure that the opening and
closing of the display will not interfere with
operation of the gear shift.
Seal
(Included)
Pressure
Plates*1
Hex Bolt
(Included)
Movable Display
Face Plate*2 (Included)
<Mounting Hole Position>
Position A
2
Angle of installation
About the installation angle, please install as
horizontally as possible within the following angle
range. If the installation angle is beyond the range,
the current position may not be correctly displayed
and a maloperation may be caused for the
navigation mode.
Position B
Position C
• Depending on the position chosen, the front panel will protrude
differently.
Front Panel
Dashboard
Position A
Front Panel
0°
10°(±5°)
Front of the unit
Top of the unit
Dashboard
Position B
Front Panel
0-30°
Side of the unit
Dashboard
Position C
*1 If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
94-EN
How to use a Seal
When your vehicle has the Bracket, mount the long
hex bolt onto the rear panel of the INA-W910R and
put the Rubber Cap on the hex bolt. If your vehicle
does not have the Mounting Support, reinforce the
head unit with the metal mounting strap (not
supplied). Secure the ground lead of the unit to a
clean metal spot using a screw (*1) already attached
to the vehicle’s chassis. Connect all the leads of the
INA-W910R according to details described in the
CONNECTION section.
If A is used for installation:
Affix the seal so that mounting holes B and C are covered.
If B is used for installation:
Affix the seal so that mounting holes A and C are covered.
• For the screw marked “*2”, use an appropriate screw for the chosen
mounting location.
5
Slide the INA-W910R into the dashboard until it
clicks. This ensures that the unit is properly locked
and will not accidentally come out from the
dashboard.
Removal
If C is used for installation:
Affix the seal so that the mounting holes A and B are covered.
1. Insert the bracket keys into the unit, along the guides
on either side. The unit can now be removed from the
mounting sleeve.
This unit
Bracket keys
(Included)
2. Pull the unit out, keeping it unlocked as you do so.
Installing the Face Plate
*2 If A is used, the supplied face plate may be mounted.
If B is used, the face plate must be modified before installing it.
To modify the face plate, consult your Alpine dealer.
If C is used, the face plate cannot be mounted. Consult your Alpine
dealer.
<JAPANESE CAR>
Take the face plate off, and secure the ground lead of the unit to
a clean metal spot using a screw (*) already attached to the
car’s chassis.
Attach the Original Mounting Bracket to each side of the
INA-W910R, using the screws supplied with INA-W910R.
Screws (M5 × 8) (Included)
4
Screw
Hex Nut (M5)
*2
Ground Lead
Bolt Stud
Metal
Mounting
Strap
*
Mounting
Bracket
*1
Face Plate (Included)
Chassis
This unit
Ground Lead
Chassis
95-EN
Install the GPS antenna
<For inside vehicle>
1. Stick the ground pad at the centre of dash board and close to windshield with one inch distance.
2. Attach GPS antenna to the centre of ground pad. (the cable side faces the back of vehicle)
<For outside vehicle>
At the front or back of vehicle roof.
Wiring the GPS antenna cable
Do not bend or fold the GPS antenna cable.
• When installing the INA-W910R to the vehicle, make sure the back of unit and the cable must not be bent.
Connect the GPS antenna
Securely connect the GPS antenna connector to INA-W910R.
Connection of USB extension cable (Included)
Connect the USB extension cable to the USB connector of the unit, and then secure the connection using the lock case supplied with USB extension
cable as shown below.
INA-W910R
USB Connector
Cable (Supplied)
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
ACC
(Red)
INA-W910R
SPST SW (Optional)
FUSE (5A)
(Optional)
BATTERY
(Yellow)
FUSE (20A)
(Optional)
Battery
• If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold separately).
• The diagram and the fuse amperage shown above are in the case when INA-W910R is used individually.
• If the switched power (ignition) lead of the INA-W910R is connected directly to the positive (+) post of the vehicle’s battery, the
INA-W910R draws some current (several hundred milliamperes) even when its switch is placed in the OFF position and the battery may be
discharged.
To prevent external noise from entering the audio system.
Locate the unit and route the leads at least 10 cm away from the car harness.
Keep the battery power leads as far away from other leads as possible.
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various
noise suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
•
•
•
•
96-EN
Calibration when connected to
HCE-C300R
Obstacle detection performance adjustment and guidance mark settings
of HCE-C300R (REAR VIEW CAMERA SYSTEM) require that
camera installation information be entered and calibration performed. If
camera information is not entered, accurate detection will not be
possible, so be sure to perform calibration.
For details on calibration, refer to “Calibration” in the owner’s manual
of HCE-C300R. To perform calibration with the supplied switch, refer
to “Performing Calibration” in the owner’s manual of HCE-C300R.
When connected to this unit, you can perform operations via the screen
of this unit.
Continue with the following operations after performing step 4 in
“Performing Calibration” of the owner’s manual of HCE-C300R. While
doing such operations, touch the button on the screen to select
“CHANGE” or “DONE” to perform calibration on this unit. Touching
[Corner] and [Back] on the screen of this unit performs the same
operation as pressing the switch which is supplied by HCE-C300R.
[Corner] = VIEW: Selects a desired item.
(The switch that is selected is enclosed by a
yellow frame.)
Executes the selection.
[Back] = SET.:
To activate the Calibration Setup Mode in this unit
1
2
Perform steps 1 and 2 in “Performing Calibration” of
the owner’s manual of HCE-C300R.
Press SOURCE/
on the unit.
The SOURCE selection screen is displayed.
3
Touch
(CAMERA).
The Camera mode is activated and the Top menu is
displayed.
4
Touch any area of the screen to display the view
change function keys.
• Make sure view change function is set to ON (page 48).
Display example for Top menu screen
5
Touch [Back]
[Corner]
[Back] according to
the instructions on the screen.
The Setup Mode screen appears.
Display example for Setup mode screen
97-EN
Connections
Antenna
ISO Antenna Plug
REMOTE OUT
To remote input lead
(White/Brown)
REMOTE IN
To remote output lead
(White/Brown)
REVERSE
To plus side of the back lamp
signal lead of the car
(Orange/White)
CAMERA SW
Not used
(Black)
GUIDE CONT
To guide control input terminal
(White/Green)
(Black)
To steering remote control
interface box
Microphone (Included)
GPS Antenna
(Yellow)
To Video Output terminal
(Red)
(White)
(Yellow)
To Audio Output terminals
(R,L)
To Video Input terminal
(Red)
(White)
GUIDE
To Audio Input terminals
(R,L)
To Guide Input terminal
(Black)
CAMERA IN
To Camera with RCA Output terminal
(Yellow)
Rear Left
Amplifier
Rear Right
Front Left
Amplifier
Front Right
Amplifier
Subwoofers
CD Changer
(Sold Separately)
(Pink/Black)
AUDIO INTERRUPT IN
(Blue/White)
REMOTE TURN-ON
(Yellow/Blue)
PARKING BRAKE
(Green/White)
SPEED SENSOR
(Red)
ACC
(Black)
GND
(Blue)
POWER ANT
Not used
To amplifier or equalizer
To the parking brake signal lead
To the vehicle speed pause line
To power antenna
Ignition key
(Yellow) BATTERY
Battery
or
Speakers
(Green)
(Green/Black)
(White)
(White/Black)
Rear left
Front left
(Grey/Black)
Front right
(Grey)
(Violet/Black)
Rear right
(Violet)
To USB memory/
Portable audio player
To iPod/iPhone
• Set the system switch to “NORM” when only a changer is connected (when the Ai-NET compatible equalizer is not used).
When the IMPRINT audio processor is connected, set to EQ/DIV position.
* The system switches are located on the bottom of the unit.
98-EN
Antenna Receptacle
iPod AUDIO/VIDEO Input Connector
ISO/JASO Antenna Adapter (sold separately)
Input the iPhone/video compatible iPod audio/video signal
or AUX video/audio signal.
ISO/JASO Antenna Adapter may be required, depending on
the vehicle.
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control
output lead.
• Set “AUX2 IN” to “iPod Video” in “Setting the AUX Mode”
(page 48) when an iPhone or a video compatible iPod is connected.
• Set “AUX2 IN” to “AUX” in “Setting the AUX Mode” (page 48)
when normal AUX video/audio is input.
GPS Antenna Receptacle
To GPS Antenna.
MIC Input Connector
Reverse Lead (Orange/White)
To Microphone (supplied).
Use only when a back-up camera is connected. Connect to
the plus side of the car’s reverse lamp. This lamp illuminates
when the transmission is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).
Ai-NET Connector
Camera Switch Lead (Black)
Connect this to the output or input connector of another
device (CD Changer, Equalizer, etc.) equipped with Ai-NET.
• Be sure to set “Setting the Connected Head Unit (MODEL SETUP)”
to “DVD CHG”, when the DHA-S690 is connected.
USB Connector
Not used for this unit now.
AUX I/O/Camera Input Connector
Guide Control Lead (White/Green)
RCA Output/Input Connector
Use when an optional External Audio Processor with guide
control input terminal is connected.
System Switch
Steering Remote Control Interface Connector (Black)
To steering remote control interface box.
For details about connections, consult your nearest Alpine
dealer.
Video Input Connector (AUX INPUT) (Yellow)
When connecting an equalizer or divider using Ai-NET
feature, place the two switches in the EQ/DIV position.
When no device is connected, leave the switches in the
NORM position.
• Be sure to turn the power off to the unit before changing the switch
position.
Input the video.
Power Supply Connector
Audio Input Connectors (AUX INPUT)
Digital Output Terminal (Optical)
RED is right and WHITE is left input the audio.
Output the video.
Use when combining fiber optic digital input compatible
products. Be sure to use the Optical Digital Cable
(KWE-610A) (sold separately) only.
Audio Output Connectors (AUX OUTPUT)
Ai-NET Cable (Included with CD Changer)
RED is right and WHITE is left output the audio.
Audio Interrupt In Lead (Pink/Black)
Guide Connector (Black)
Not used for this unit.
Output the audio signal of navigation interruption.
When connecting an Audio processor, connect this lead to
the Guide Input terminal with an optional RCA Extension
cable.
Remote Turn-On Lead (Blue/White)
Camera Output RCA Connector (CAMERA IN)
(Yellow)
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the INA-W910R.
Video Output Connector (AUX OUTPUT) (Yellow)
Use when connecting an optional camera with RCA/Video
output connector.
• Set “RCA” in “Setting the Camera Input” (page 48) when
connecting a camera with RCA Output connector.
Rear Output/Input RCA Connectors
It can be used as Rear Output or Input RCA Connectors.
Front Output/Input RCA Connectors
It can be used as Front Output or Input RCA Connectors.
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Parking Brake Lead (Yellow/Blue)
Speed Sensor Lead (Green/White)
Improper connection of the speed pulse line may cause
important safety features of the vehicle to fail (such as the
brakes or air bags). Such failures may result in an accident
and loss of life. We strongly recommend that the installation
be performed by a trained, authorized Alpine dealer.
Switched Power Lead (Ignition) (Red)
RCA Extension Cable (sold separately)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)
12V only when the ignition is turned on or in the accessory
position.
Direct CAMERA Input Connector
Ground Lead (Black)
Use when the optional direct camera is connected.
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Subwoofer RCA Connectors
RED is right and WHITE is left.
• When an Alpine rearview camera HCE-C300R is used, please make
sure to connect it to this unit via Direct CAMERA Input Connector.
99-EN
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
Fuse Holder (10A)
ISO Power Supply Connector
ISO Connector (Speaker Output)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Left Front (+) Speaker Output Lead (White)
Left Front (–) Speaker Output Lead (White/Black)
Right Front (–) Speaker Output Lead (Grey/Black)
Right Front (+) Speaker Output Lead (Grey)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
USB extension cable (Included)
AV extension cable (Included)
USB 30P cable (Included)
100-EN
System Example
Connect the Ai-NET compatible audio processor (Fiber optic digital compatible), DVD player and changer.
Optical Digital Cable (KWE-610A)
Fiber optic digital Input
terminal (for head unit)
Guide Control
Audio Processor (Ai-NET)
(Fiber optic digital
compatible) (sold separately)
Fiber optic
digital Input
terminal (for
DVD Player)
Ai-NET
cable
Ai-NET cable
Fiber optic cable
(Yellow)
DVD Video Player
(White/Brown)
REMOTE OUT
(White/Brown) (Ai-NET)
REMOTE IN
(DVA-5210, etc.)
(sold separately)
Ai-NET cable
CD Changer
(Ai-NET)
(sold separately)
* Only connect Fiber optic digital compatible CD Changer
• When the fiber optic digital compatible product is connected, it is necessary to set the mode of this unit. Refer to “Setting the Digital Output”
(page 49).
Please observe the following when using Fiber optic Cable.
• Do not coil the Fiber optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber optic Cable.
• Be careful not to bend the Fiber optic Cable at a sharp angle.
101-EN
Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place the two switches in the EQ/DIV position.
When no device is connected, leave the switches in the
NORM position.
• Be sure to turn the power off to the unit before changing the switch
position.
Ai-NET Cable (Included with DVD video player)
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
To Ai-NET Connector (Grey)
RCA Extension Cable (Included with DVD video
player)
Video Input Connector (AUX INPUT) (Yellow)
Connect the video output lead of a DVD video player or
DVD changer to this terminal.
AUX I/O/Camera Input Connector
To Ai-NET Connector (Black)
Ai-NET Cable (Included with IMPRINT Audio
Processor (PXA-H100))
Fiber optic Cable (sold separately)
Guide Connector (Yellow)
Output the audio signal of navigation interruption.
RCA Extension Cable (sold separately)
Navigation audio input jack (RCA input)
Used to input the audio output signals of a navigation
system.
Optical Digital Cable (KWE-610A) (sold separately)
Ai-NET Cable (Included with CD Changer)
Guide Control Lead (White/Green)
Digital Output Terminal (Optical)
102-EN
When Connecting External Equipment
To Video Output terminal
DVE-5027, etc.
(sold separately)
To Audio Output terminal
Direct rearview camera HCE-C117D,
etc. (sold separately)
To Video Output terminal
Camera with RCA video
output (sold separately)
To Audio Input terminal
Rear monitor
(sold separately)
To Video Input terminal
To Video Output terminal
TV Tuner
(sold separately)
To Audio Output terminal
(White/Brown)
REMOTE OUT
REMOTE IN
(White/Brown)
(White/Brown)
REMOTE IN
REMOTE OUT
(White/Brown)
(Orange/White)
REVERSE
Use only when back-up camera is connected.
System Switch
Video/Audio Input Connectors (AUX INPUT)
When connecting an equalizer or divider using Ai-NET
feature, place the two switches in the EQ/DIV position.
When no device is connected, leave the switches in the
NORM position.
Remote Control Output Lead (White/Brown)
• Be sure to turn the power off to the unit before changing the switch
position.
AUX I/O/Camera Input Connector
Camera Output RCA Connector (CAMERA IN)
(Yellow)
Use when connecting a camera with RCA Output
connector.
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to
the plus side of the car’s reverse lamp. This lamp illuminates
when the transmission is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).
• Set “RCA” in “Setting the Camera Input” (page 48) when
connecting a camera with RCA Output connector.
Video/Audio Output Connectors (AUX OUTPUT)
Use when connecting an optional monitor etc.
103-EN
RCA Extension Cable (sold separately)
Video/Audio Input Connectors
YELLOW is for input video, RED is right and WHITE is left
input the audio.
AV/RCA interface cable (4-pole mini AV plug to
3-RCA) (sold separately)
Usable 4-pole mini AV plug
Wiring convention of this system is as follows:
Audio L (White)
Audio R (Red)
Ground
Video (Yellow)
• Configuration commercially available 4-pole mini AV plugs is not
unified.
iPod (V)/AUX Input Connector
Input the iPhone/video compatible iPod audio/video signal
or AUX video/audio signal.
• Set “AUX2 IN” to “AUX” in “Setting the AUX Mode” (page 48)
when normal AUX video/audio is input.
• When you use this connector as normal video/audio input connector
(AUX 2 Input), an optional AV/RCA interface cable should be used.
.
For details, refer to
Camera extension cable (Included with direct
rearview camera)
Direct CAMERA Input Connector
Use when the optional direct rearview camera HCE-C117D,
etc. is connected.
About the Rules of Bluetooth Electromagnetic
Radiation Regulation
Declaration of Conformity
104-EN
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising