KM-600MAH - hoshizaki
KM-600MAH
KM-600MAH
03/30/17
Item # 13231
SLIM-LINE MODULAR CRESCENT CUBER
Item #:
Project:
Qty:
WxDxH
AIA#:
22" x 27 " x 37
3/8
"
7/16
Features
Individual crescent cube
Stainless steel evaporator
KM-600MAH
Air-Cooled
Shown on optional bin B-300
CycleSaverTM design
TM
• Up to 592 lbs. of ice production per 24 hours
• Durable stainless steel exterior
• Protected by H-GUARD Plus
Antimicrobial Agent
• EverCheckTM alert system
TM
• Mount two units side-by-side for 1,184 lbs. per 24
hours (in only 44” of floor space)
• Removable air filters (Air-cooled model only)
• R-404A Refrigerant
Available on Bins:
*
B-300PF/SF B-700PF/SF B-900PF/SF B-1300SS
B-1500SS
B-500PF/SF B-800PF/SF B-1150SS
B-1650SS
Top kit may be required. See Bin Spec Sheets.
Warranty:
*3 Year
Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for
warranty in other countries.
ICE PRODUCTION
Condenser
Air-Cooled
Air / Water Temp
Lbs. per 24 hours
70°/ 50°F 90°/ 70°F
Model
592
KM-600MAH
KM Cube Dimensions*
11/8”
11/2”
ELECTRICAL
503
14.3
720
19.7
Operating Limits
•
•
•
•
Ambient Temp Range
Water Temp Range
Water Pressure
Voltage Range
N/A
5.7
45 - 100°F
45 - 90°F
10 - 113 PSIG
104-127V
• Panels easily removed and all components
accessible for service.
• Allow 6” (15 cm) clearance at rear, sides, and top for
proper air circulation and ease of maintenance/service.
* approximate size in inches, image not to scale
© HOSHIZAKI AMERICA, INC.
Lbs.
Service
”
1/2
Printed in the U.S.A.
WATER USAGE
Condenser
Potable
kWh Used Max. Fuse Size
Amperage
or HACR
Gal. per 100 lbs. Gal. per 100 lbs. per 100 lbs.
90°/ 70°F
90°/ 70°F
Cubes
90°/ 70°F Circuit Breaker
Per Cycle
15A
Voltage
Heat
Rejection
BTU/hr.
12.0A 115-120V/60/1 9,500
Shipping
Weight
ENERGY
STAR®
200 lbs.
Plumbing
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe
or Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 1/4” Nominal ID
Hard Pipe (open drain system) or Copper Water Tubing
(closed loop system) or Equivalent
Hoshizaki reserves the right to change specifications without notice.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
KM-600MAH
KM-600MAH
03/30/17
Item # 13231
FRONT VIEW
SLIM-LINE MODULAR CRESCENT CUBER
AIR-COOLED
SIDE VIEW
27 9/16”
(700mm)
Water Inlet
1/2” FPT
1/16”
(1.2mm)
Drain
3/4” FPT
Front
1/8”
(3mm)
Drain (Dew Water)
3/8” O.D. Pipe
27 3/8”
(695mm)
1 3/16”
(30mm)
REAR VIEW
AIR-COOLED
BOTTOM VIEW
AIR-COOLED
Front
AIR-COOLED
© HOSHIZAKI AMERICA, INC. 618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Printed in the U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising