2 Welcome to the Pureit Family 091/ +632-5620071 +632-9498 REACH PUREIT AT +632-5620091 +632-9498071 www.pureitwater.com 1 WELCOME TO THE PUREIT FAMILY Congratulations! We thank you for the trust you have shown in our product and assure you that our product will live up to your expectations. Millions of users trust Pureit to provide safe water to their loved ones. Our product is developed by experts and is designed to give you water that is completely protected from disease causing germs. Pureit meets some of the toughest standards of leading institutions both in India and abroad. If you need to get in touch with us for anything, please call us a t +632-5620091, +632-9498071. We once again thank you for buying Pureit Marvella and we look forward to a long and fruitful association with you. 2 CONTENTS Unique features of Pureit Marvella..........................................................................3 Know your Pureit Marvella........................................................................................4 Pureit Marvella’s Unique Technology.....................................................................5 water-flow Diagram & Electrical Circuit Diagram............................................6 Important usage instructions....................................................................................7 Advance Alert System – LED Indicator Panel....................................................15 Ordering CSF...............................................................................................................16 Important instructions and precautions..............................................................17 FAQs.............................................................................................................................. 23 troubleshooting..........................................................................................................24 3 Unique features of Pureit Marvella Advance Alert System Alerts you before 150 Litres (approximately equal to 15 Days for a Household size of 5 members) of life left for CSF to get over High Intensity UV Lamp Powerful 11 W UV lamp for enhanced safety 4 Litres storage capacity Ready to serve even in the absence of electricity Automatic Shut-off Stops water flow when UV lamp or any other critical component is not working Fully automatic Works without any intervention. The system senses if the water tank is not full, purifies and stores water automatically USEPA standards on purification Meets stringent criteria of Environmental Protection Agency, EPA (USA) for harmful virus and bacteria removal Advanced voltage fluctuation guard Protects your purifier from sudden voltage fluctuation ranging between 100 to 240 Volts Tank Full indicator Indicates when the storage tank is full Break resistant tap Equipped with break resistant tap which is tested for up to 50000 operations 4 KNOW YOUR pureit MARVELLA 1 1Front cover lock 2Germ Kill Indicator Indicator 3Storage tank 4Tap 3 2 CHANGE GKK 4 Technical specifications for pureit Marvella Pureit Marvella Purifier Gross dim:Height x Width x Depth 430 mm x 300 mm x 260 mm Net dim:Height x Width x Depth 390 mm x 265 mm x 225 mm Gross weight (Dry) 4 kgs Storage capacity 4 litres typically Pressure range* 5 psi to 80 psi* Purified water flow rate (Average) 350 ml – 750 ml/min Purification technology Sediment Filter and Activated Carbon Filter, Sediment Plus Filter, UV Chamber Material used for construction Food safe, non-toxic, engineering plastics Carbon Sediment Filter Material used for construction Food safe, non-toxic, engineering plastics Purification capacity This has been designed to give typically 3000 litres of water under tested conditions of 15 psi input pressure and 25°C temperature Expiry period Three years from packaging Germkill performance standard Meets stringent criteria of Environmental Protection Agency, EPA (USA) for harmful virus and bacteria removal * 1) Install 1 PRV unit where the input water line pressure is 5 psi to 60 psi. 2) An additional PRV unit has to be installed if the input water line pressure is between 60 psi to 80 psi, at extra cost to consumer. 3) Purifier will not be installed in case input water line pressure is more than 80 psi. 4) In exceptional cases where the Input water pressure is less than 5 psi, you will need to install a pressure-boosting pump, at an extra cost. Please contact Pureit Call Centre for help. 5 Pureit Marvella’s Unique Technology X Ray View igh Inte nsity UV Cha m b High intensity UV rays ensure maximum UV intensity for inactivation of bacteria, virus and parasites to deliver safe water always ent Plus Filt e r 3 4 Sed d im Ensures that no suspended particles enter the UV chamber er H Se Ac tiva ted Carbon Fi lte r Removes chlorine and organic impurities like harmful pesticides and remove parasites. It also absorbs bad odor causing organic compounds from water iment Filter Removes fine and coarse particulate impurities 2 1 The Sediment Filter and the Activated Carbon Filter together are known as Carbon Sediment Filter (CSF) 6 water-flow diagram Float Feed Water ** Pressure Regulating Valve (PRV) Carbon Sediment Filter UV Chamber Diverter Ball Valve Solenoid Valve Sediment Plus Filter Low Pressure Switch Storage Tank Flow Restrictor Tap ** Operating Pressure Range 5 psi (Min) ~ 80 psi (Max) Electrical Circuit Diagram Float Switch Control Circuit 100 – 240 V AC 50-60 Hz SMPS 100-240 VAC/12VDC LPS UV Lamp 11W Solenoid Valve For detailed drawings please refer to the downloadable service instructions manual from our website 7 Important usage Instructions 1 Purifier has been designed to purify Pre-treated drinkable water. It is not intended to purify lake water, well water, river water or other types of untreated water. 2 Pureit does not remove some dissolved salts naturally present in water which may contribute to taste like sodium, chloride, calcium, magnesium, etc. In fact, Pureit retains some ‘good’ dissolved salts present in drinking water. This may affect the taste of water. 3 The water will be free of harmful germs, but there may not always be an improvement in taste. However by pouring brackish/sea water into the Pureit, there may be a risk of choking the system, and some of the components may malfunction. 4 CHANGE GKK CHANGE GKK Ensure that Pureit Marvella is not getting installed above any electric socket. 8 Important usage Instructions 5 Hot Water CHANGE GKK CHANGE GKK Ensure the input water temperature is between 10° to 40°C. Do not connect the purifier to any geyser, heater etc. 6 CHANGE GKK Avoid sharp bends to the tube that is connected to the purifier. CHANGE GKK 9 Important usage Instructions 7 Install your Pureit Marvella away from the direct sunlight. 8 CHANGE GKK CHANGE GKK Discard the first two cycles of water before you start using the purifier. Service technician may have to open the device and remove the flow restrictor Plunger if the input pressure is less than 10 psi. Only authorised service technician should handle UV chamber. 10 Important usage Instructions 9 CHANGE GKK Ensure that the input pressure is more than 5 psi and less than 80 psi*. 10 CHANGE GKK Do not plug or unplug the power cord with wet hands. Ensure that the plug isn’t wet while plugging in, or plugging out to avoid risks such as electrical shock or fire. *1) Install one PRV unit where the input water line pressure is 5 psi to 60 psi. 2) An additional PRV unit has to be installed if the input water line pressure is between 60 psi to 80 psi, at extra cost to consumer. 3) Purifier will not be installed in case input water line pressure is more than 80 psi. 4) In exceptional cases where the Input water pressure is less than 5 psi, you will need to install a pressure-boosting pump, at an extra cost. Please contact Pureit Call Centre for help. 11 Important usage Instructions 11 Never splash the filtration system with water while cleaning. 12 CHANGE GKK CHANGE GKK If the power cord is damaged, the power adapter must be replaced and not used. 12 Important usage Instructions 13 Avoid using an extension cord. 14 Do not install the purification unit where it could freeze. 13 Important usage Instructions 15 Do not allow any foreign or unexpected material to enter into the storage tank. The filtered water in the storage tank may deteriorate in the process. 16 In case of any smoke or burning smell, remove the plug immediately and call the Pureit service centre. 14 Important usage Instructions 17 When shifting your house, get the purifier duly inspected and packed by the Pureit service technician. Remove water from the storage tank and properly pack the purifier in case of shifting. 18 You should only store water in the purifier and not use other bottles and containers. If you do so, water may get contaminated. Always Switch off the mains (Power Supply to Purifier), if for any reason, you are shutting off the Diverter-Ball Valve. 15 Advance Alert System – LED INDICATOR PANEL / +632-5620091 +632-9498071 CHANGE CSF Call +632-5620091 +632-9498071 POWER ON/OFF TANK FULL No Light Power Off No Light Storage tank is filling Green Power On Solid Green Storage tank full PURIFICATION ON/OFF CHANGE CSF Blink Green UV Warming Time (45 Sec) Solid Green OK Solid Green Purification Working Solid Red Purification Not Working Blink Red Advance Alert for CSF change prior to Auto Shut-off No Light Power Off Solid Red Auto Shut-off No Light Power Off 16 Ordering CSF CSF contains Sediment Filter and Activated Carbon Filter You can order CSF through following ways: By Calling Pureit Helpline +632-5620091 / +632-9498071 or By Logging on to Pureit Website www.pureitwater.com Please call the Pureit helpline number to find out the current cost of the CSF 17 Important Instructions and Precautions Cleaning and Maintenance 1 CHANGE CSF CHANGE CSF ION FECT DISIN TABL ETS pm 50 p ne ri chlo You can clean the tap by using disinfectants like Bleach/hypochlorite (50 ppm available chlorine). Discard 2 litres of water after cleaning the tap. 2 CHANGE CSF CHANGE CSF X SUPER X DETERGENT POWDER SOAP External portion of the purifier must be cleaned using wet cloth only. Do not use detergent or soap. UV chamber is a sophisticated and specially designed mechanism. It should be serviced by authorised service personnel only. 18 Precautions 1 CHANGE CSF CHANGE CSF Always ensure to close off the ‘Ball valve diverter’ and switch off the mains, if you are out of home for long duration. 2 CHANGE CSF Turn off the ball valve diverter and switch off the mains, if you notice any leakage from the purifier. CHANGE CSF 19 3 CHANGE CSF CHANGE CSF Do not try to open the purifier for cleaning the storage tank. This can be done only by the qualified company personnel or authorised agent. 4 CHANGE CSF CHANGE CSF 1). You can discard the water in the storage tank once in 15 days. 2). Always drain the water in the storage tank if you have not used the purifier for more than 2 days. 20 5 Do not light candles on the purifier. Do not keep anything on top of the purifier. 6 Do not allow any foreign or unexpected material to enter into the storage tank. The purified water in the storage tank may deteriorate in the process. 21 7 CHANGE CSF Do not put heavy or sharp objects e.g. radio etc. on the purifier. 8 Please ensure that the purifier is not installed near a cooking range. 9 In case, UV Lamp breaks, carefully sweep all the fragments, wipe the area with a wet towel and dispose all the fragment including the used towel in a sealed plastic bag. Open windows to allow room to ventilate. Do not use vacuum. Hand over the bag to the service technician for proper disposal of the same when he visits to put a new UV lamp. 22 General Do’s and Don’ts 01. Please dispose the used consumables like Sediment Filter and Activated Carbon Block along with the other household waste through the municipal disposal system. 02. You should only store water in the purifier and not use other bottles and containers. In case you do store, please ensure that the bottle/container is properly cleaned. 03. Do not use water not intended for drinking in Pureit system e.g. from abandoned or abused water bodies or water sources in which human, animal or industrial wastes are disposed or water that is excessively acidic or alkaline. 04. The output water may continue to have flora which are harmless and pose no health hazard to normal healthy adults and children. 05. You should ensure that the area around and beneath the purifier is kept clean at all times. 06. Always rely on the Advance Alert System warning to change the Carbon Sediment Filter (CSF). Auto Shut-off is only an additional assurance of safety. 07. Freshly purified water should be used for drinking. 08. Never buy Pureit Marvella or the Carbon Sediment Filter (CSF) from an unauthorised source. Remember all you have to do is call Pureit Helpline number and we will deliver a new CSF to you at your home for a minimal delivery charge. 09. Don't drop any of the components, or the purifier as a whole from a height. This may cause the components to fracture or break, and the guarantee of getting water completely safe from harmful germs will no longer be valid. 23 FAQs How does ‘Pureit Marvella’ purify water? Can I change the CSF? Pureit Marvella has a 4-stage purification system which ensures you get water that is completely safe from harmful germs that meets the stringent standards set by the USEPA for Microbiologically safe drinking water. It is not recommended that the users change the CSF themselves. Please call Pureit helpline when you need to replace the CSF. First, the water passes through the Sediment Filter which removes fine and coarse particulate impurities/dirt. Can I drink the first purification cycle of water from the purifier? The second stage is the Activated carbon that removes remaining dirt, chlorine and organic impurities like harmful pesticides and removes parasites It also adsorbs color and odor causing organic compounds from water. No, it is recommended to throw the first cycle of water that is filled in the storage tank when the new Pureit Marvella purifier is installed, and also whenever the CSF is replaced. Then water passes through Sediment plus Filter which ensures no suspended particle enters UV chamber. Can I open and service my purifier? Then the water passes through the high intensity UV chamber which removes microbial contaminants like bacteria, virus and parasites. It is not recommended to open and service purifier by an individual. Call Pureit helpline if you face any issue which requires servicing and opening the purifier. What is the storage capacity of ‘Pureit Marvella’? What should I do if any part of the purifier is broken? Pureit Marvella has a storage capacity of 4 litres. The storage tank is fully automatic and as and when you take water out of the tank, the purification process starts automatically again and refills the storage tank provided the power is on. Please call the Pureit helpline number. Our technician will visit your house and will guide you on the repairs required. There will be a nominal visiting charge and you would need to buy the parts required. How much time it takes to purify water in ‘Pureit Marvella’? What should I do if there is a leakage from the purifier? ‘Pureit Marvella’ takes an average of 5 to 12 minutes to purify 4 litres of water depending upon the input water pressure, water quality and remaining life of the CSF. First switch off the ball-valve if you find any leakage from the purifier and turn off the power switch. Check for any visible improper fitment (like tap) and then call our Pureit helpline number and register a service request. What is an Advance Alert System? Pureit Marvella’s Advance Alert System warns you before 150 Litres (approximately equal to 15 Days for a Household size of 5 members) before your purifier stops working. Please refer to the LED indicator panel instructions for details. Does this mean that I need to change the UV lamp after every 3000 litres ? No. The UV lamp is designed to last typically for 10,000 working hours.You need to change only the CSF after 3000 litres of water has been purified. How long the stored water in ‘Pureit Marvella’ can be used for drinking? You can use stored water for 2 days. If it is not used for more than 2 days we advise you to discard that water, refill and then consume. 24 troubleshooting The water from the purifier tastes unusual This might be due to one or more of the following reasons: a. The storage tank has not been cleaned for a long time – Please call Pureit Helpline No. to get storage tank cleaned. b. The water is stored for too long in the storage tank – Please drain the stored water and fill fresh water. c. The CSF needs to be replaced/cleaned – Please replace or get them cleaned by calling the Pureit Helpline number. The purification is taking long time This might be due to one or more of the following reasons: a. The ball valve may not be opened fully – Please ensure the ball valve is open completely so that the water flow is not restricted. b. The CSF may have choked depending on input water quality. c. The input water pressure may have dropped below 5 psi. d. Please call Pureit Helpline. The storage tank is not getting filled This might be due to one or more of the following reasons: a. Check if the ball valve is kept open. b. Check if ‘Change CSF’ is RED. If yes then replace the CSF. c. Check if there is any leakage from the purifier and if there is any leakage then call the Pureit Helpline number. 25 fic PT TUV NORD Indonesia Laboratory Division (Indonesia) o ns ati i Ce rt Mexican Institute of Water Technology [IMTA] (Mexico) Scottish Parasite Diagnostic Laboratory (UK) National institute of Cholera and Enteric Diseases (India) BioAgri Laboratories (Brazil) Setting benchmarks in water purification Pureit is the world’s largest selling water purifier brand* - India - Mexico - Indonesia - Brazil - Bangladesh - Nigeria - Srilanka - Kenya - Ghana - Philippines No. 1 choice of families worldwide * Based on Unit shipment sales for 2012. Excludes pitchers and faucet mount system sales and includes only in-home point-of-use drinking water treatment systems.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project