MASTERLINK GATEWAY LinTronic

MASTERLINK GATEWAY LinTronic
MASTERLINK GATEWAY
LinTronic
LinTronic
Masterlink Gateway
and how you get more out of it
http://lindate.dk
Updated: 110517
LinTronic
MASTERLINK GATEWAY
B&O MasterLink Gateway (MLGW)
NETWORK
RS232
MASTERLINK
Communication
Output
OBSERVE
The Masterlink Gateway only holds 1 pcs. RS232
and only supports a limited number of products
LinTronic can increase that number.
LinTronic
MASTERLINK GATEWAY
Here is how we solve that:
We cascade-connect the RS232 ports
of our products allowing ONE port to
control 3 products
NETWORK
RS232 control of
non-supported products
RS232
MASTERLINK
Relays controlling curtains, light,
garagedoor, etc. etc.
InfraRed control of
non-supported products.
MASTERLINK GATEWAY
LinTronic
LIMITED PRODUCT SUPPORT
You cannot control the product you want
LinTronic can improve that, too.
We allow you to control non-supported products,
like projectors, curtains, relays, light, etc. etc.
MASTERLINK GATEWAY
LinTronic
LIMITED CUSTOM STRINGS SUPPORT
You can only send out visible ascii characters
LinTronic can improve that, too.
We allow you to convert simple ascii-commands
into complex protocols - and back
http://lintronic.dk
Updated: 110517
LinTronic
MASTERLINK GATEWAY
Here is how we solve that:
We convert simple RS232 commands
into complex protocols
NETWORK
RS232
MASTERLINK
Your command in clear text:
Projector ON
Product requires:
<CR><02>PWR01<03><LF>
We convert to needed control characters
like for example carriage return, linefeed,
start of text, end of text, checksum,
etc. etc. etc.
Command-converter
MASTERLINK GATEWAY
LinTronic
And what does this give you ?
A much wider span of control options.
You are not restricted to only use
products supported by B&O.
A customer wanted us to control
his curtains from his Iphone.
See the next pages.
MASTERLINK GATEWAY
LinTronic
Customer installed the B&O app
on his Iphone
LinTronic
MASTERLINK GATEWAY
We cascase connected two RELAY 208's
to the Masterlink Gateway serial RS232 port
and the curtains control wires.
NETWORK
2 curtains up/down
4 curtains up/down, 230 vac motors
RS232
MASTERLINK
MASTERLINK GATEWAY
LinTronic
First you turn off the MasterLink Gateway
protocol, on the RS232 port
MASTERLINK GATEWAY
LinTronic
Select Device: Customs strings
We decided to name it RELAY 208.
Adjust ithe requred comport settings.
MASTERLINK GATEWAY
LinTronic
We created an OPEN and a CLOSE command
The ASCII command to be entered follows our open
LinTronic protocol. Can easily be copied from our
config tool - or we can assist with that.
MASTERLINK GATEWAY
LinTronic
We created two virtual buttons, related to the room
called STUE (livingroom) and they automatically
showed up on the iPhone.
MASTERLINK GATEWAY
LinTronic
We created two virtual buttons, related to the room
called STUE (livingroom) and they automatically
showed up on the iPhone.
MASTERLINK GATEWAY
LinTronic
We created two Macros to be executed by the two
virtual buttons, each controlling curtains to OPEN or
CLOSE.
MASTERLINK GATEWAY
LinTronic
The customer now controls
his curtains from his Iphone.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising