Cleaner
Cleaner
MODEL 40931)
INSTRUCTION MANUAL
Rated voltage
D.C. 9.6 V
Capacity
Dimensions ( L x W x H)
Net weight
500 mY
484mmx112mmx143mm
(19-1116'' x 4-13/32" x 5-518")
1.3 kg (2.9 Ibsl
IMPORTANT
SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should
always be followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING THIS APPLIANCE
reduce the risk of fire, electric shock, or
WARNINGTO
injury:
1. Do not leave appliance when the battery cartridge is installed.
Remove the battery cartridge from your appliance when not i n use and
before servicing.
2. Do n o t allow t o be used as a toy. Close attention is necessary when used
by or near children.
3.Use only as described in this manual. Use only manufacturer's recommended attachments.
4.If appliance is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it t o a service center.
5. Do not handle appliance w i t h wet hands.
6. Do not put any object into openings. Do not use w i t h any opening blocked;
keep free of dust, lint, hair, and anything that may reduce air flow.
7. Keep hair, loose clothing, fingers, and all parts of body away from openings
and moving parts.
8. Do not pick up anything that is burning or smoking, such as cigarettes,
matches, or h o t ashes.
9. Do not use without filters in place.
IO. Turn off all controls before removing the battery cartridge.
1 1 . Use extra care when cleaning o n stairs.
12. Do not use t o pick up flammable or combustible liquids such as gasoline or
use in areas where they may be present.
13.Use only the charger supplied by the manufacturer t o recharge.
14.Do not charge the unit outdoors.
This appliance is intended for household use.
2
ADDITIONAL SAFETY RULES
1. Read this instruction manual and the charger instruction manual carefully
before use.
2. Do n o t pick up wet materials, lit cigarettes or the like.
3. Stop operation immediately if you notice anything abnormal.
4. If you drop or strike the cleaner, check i f carefully for cracks or damage before
operation.
5. Do n o t bring close t o stoves or other heat sources.
6. Do not block the intake hole or vent holes.
SAVE THESE INSTRUCTIONS.
3
9-
FUNCTIONAL DESCRIPTION
Installing or removing battery cartridge
*Always switch off the cleaner before insertion or removal of the battery cartridge.
.To remove the battery cartridge, remove
the rear cover from the cleaner by pushing
it in the direction of the arrow and then
withdraw the battery cartridge from the
cleaner.
Rear cover
.To insert the battery cartridge, align the
tongue on the battery cartridge with the
groove in the cleaner and slip it into place.
Then close the rear cover.
Battery cartridge
*Do not use force when inserting the battery cartridge.
If the cartridge does not slide in easily, it is not being inserted correctly
Charging
Charge the battery cartridge with your Makita charger properly before use. Following
batteries can be used for this cleaner:
Makita battery type 9000, 9001, 9002, 9033.
4
Switch action
CAUTION:
*Always be sure that the dust bag or paper filter is installed properly in the cleaner before
use. Improper installation may allow dust to enter the motor, resulting in malfunction of
the cleaner.
*Always switch off the cleaner after each use to prevent damage to the cleaner and to
lengthen the service life of the batteries.
This cleaner can be operated in "standard"
and "strong" suction. For standard suction,
slide the switch forward to the LOW position. For strong suction, slide the switch further to the HIGH position.
To stop the cleaner, slide the switch back to
the OFF position.
Switch
ASSEMBLY
Dust disposal
CAUTION:
Empty the dust bag before it becomes too full, or the suction force weakens.
Depress the buttons and oDen the front
cover.
Take the dust bag out of the cleaner carefully so that the contents will not spill out.
Empty the contents out of the dust bag.
5
Also empty
. . out the dust inside the cleaner
itself. Failure to do so may cause the
sponge filter to be clogged or the motor to
be damaged.
I
Installing dust bag
Place the dust bag into the cleaner cavity.
Insert the holder of the dust bag all the way
into the slots in the cleaner cavitv.
CAUTION:
Forgetting to install the dust bag, failure to insert the holder of the dust bag all the way into
the slots or using a broken or ripped bag, may allow dust to get into the motor. This may
result in motor failure.
6
Hook the front cover onto the front lip of
the cleaner. Then close the front cover.
I.
NOTE:
*When installing the paper filter, follow the
same procedures for the dust bag.
*Always unfold a new paper filter before
installing it on the cleaner.
OPERATION
Cleaning (Suction)
Nozzle
Attach the nozzle to clean off tables, desks,
furniture, etc. Nozzle slips on easily.
Nozzle + Extension wand (Straight pipe)
The extension wand fits in between the
nozzle and the cleaner itself. This arrangement is convenient for cleaning a floor
while standing erect.
Cleaner body
Extension wand
f /
Nozzle
7
Corner nozzle
Fit on the corner nozzle for cleaning corners
and crevices of the car or furniture.
Cleaner body
I
I
Cleaner nozzle
Corner nozzle + Extension
wand (straight Pipe)
In tight quarters where the cleaner itself
cannot squeeze in, or in high places hard to
reach, use this arrangement.
Extension wand
Corner nozzle
Possible to suck dust without nozzle, too
8
MAINTENANCE
CAUTlON :
Always be sure that the cleaner is switched off and the battery cartridge is removed
before carrying out any work on the cleaner.
After use
When storing the cleaner, hang it from a
nail using the convenient hanger in back.
Cleaning
From time to time wipe off the outside
(cleaner body) of the cleaner using a cloth
dampened in soapy water. Never use gasoline, thinner or the like. Discoloration or
cracks may result.
Wash the dust bag in soapy water occasionally. Dry it out thoroughly before use. An
insufficiently dried bag may cause poor suction and shorten the service life of the
motor.
I
\
,
-
To maintain product SAFETY and RELIABILITY, repairs. maintenance or adjustment should
be performed by Makita Authorized or Factory Service Centers, always using Makita
replacement parts.
9
Recycling the Battery
The only way to dispose of a Makita battery is
to recycle it. The law prohibits any other
method of disposal.
I
Ni-Cd
I
To recycle the battery:
1. Remove the battery from the tool.
2. a). Take the battery to your nearest Makita Factory Service Center
or
b). Take the battery to your nearest Makita Authorized Service Center or
Distributor that has been designated as a Makita battery recycling location.
Call your nearest Makita Service Center or Distributor to determine the location
that provides Makita battery recycling. See your local Yellow Pages under
’’Tools-Electric’
10
ACCESSORIES
CAUTION
These accessories or attachments are recommended for use with your Makita tool specified in this
manual The use of any other accessories or attachments might present a risk of injury to persons
The accessories or attachments should be used only in the proper and intended manner
Extension wand
Part No. 41 6042-8
Nozzle assembly
Part No. 122520-5
Nozzle assembly (for carpet)
Part No. 122291-4
..
Corner nozzle
Part No. 416041-0
Shelf brush
Part No. 191724-0
Flexible hose
Part No. 191496-7
Paper filter (10 pcs.)
Part No. 192608-5
Battery cartridge
9000/900119002/9033
Battery charger
Model DC9710
High capacity battery charger
Model DC1411
Automotive battery charger
Model DC1412
11
Dec-09-'99
us
CORDLESS CLEANER
Model 4093D
Note: The switch and other part configurations
may differ from country to country.
12
MODFL 4 0 9 3 0
IF,',"
D
$
:
Dec-09DESCRIPTION
'zM&
99 US
DESCRIPTION
M A__
CHINE
1
2
3
4
5
6
7
8
9
10
1
1
1
1
1
1
1
I
1
1
11
1
12
13
14
15
1
1
Tdpping Screw P i 3x20
16
Houslnq Set IWiIh I t e m 261
M a k i l a Label
11
18
19
20
21
22
Front Cover Complete
Hook
Rod 2 5
Compression Spring 6
Honk
Switch Lever
Switch
Sponge Sheet 4 3 ~15
Battery Holder
Sponge 2 0 3 4
Dust Cover Complete
~
Hanger
23
24
25
26
27
28
29
30
__
1
1
1
1
1
1
COW,
1
1
1
1
1
1
Sponge Sheet 70
Dusf Bag
Packing
2
1
1
-
DC Motor
Baie
Fan 8 2
Fan Cover
Rubber Ring
106
Inlet
Housing S e i [With Item 21
Resistance Circuit
Pan Head Screw M3x8
Sponge Sheet 4 3 15
Name Plat?
Note The switch and other part specil$catiorismay dtffer from country to country
13
MAKITA LIMrIED ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to
be free of defects from workmanship and materials for the period of ONE YEAR from the date of
original purchase. Should any trouble develop during this one-year period, return the COMPLETE
tool, freight prepaid, to one of Makita’s Factory or Authorized Service Centers. If inspection shows
the trouble is caused by defective workmanship or material, Makita will repair (or at our option,
replace) without charge.
This Warranty does not apply where:
repairs have been made or attempted by others:
repairs are required because of normal wear and tear:
The tool has been abused, misused or improperly maintained;
alterations have been made to the tool.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM THE SALE OR USE OF THE PRODUCT. THIS DISCLAIMER
APPLIES BOTH DURING AND AFTER THE TERM O F THIS WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIED
WARRANTIES O F “MERCHANTABILITY” AND “FITNESS FOR A SPECIFIC PURPOSE,”
AFTER THE ONE-YEAR TERM O F THIS WARRANTY.
This Warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. Some states do not allow
limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi 446-8502 Japan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising