Alcoscan AL6000 is a hand held, portable breath alcohol tester to

Alcoscan AL6000 is a hand held, portable breath alcohol tester to
Alcoscan AL6000 is a hand held, portable breath alcohol tester to check subject's
breath alcohol concentration with reliable accuracy and it is available to test in Passive
mode.
SPECIFICATIONS
1. Indication of B.A.C.:
*Normal Mode: 0.00 to 4.00 ‰ or 0.000 to 0.400%BAC or 0.00 to 2.00 mg/l BrAC by LED display
*Fast (Screening) Mode: “0”, “Low” and “High” 3 steps
2. Sensor: Semiconductor type alcohol sensor
3. Accuracy: ±0.01%BAC at 0.05%BAC
4. Mouthpiece: Normal Mode : use / Fast Mode: No use
5. Power: Two 1.5V "AA" size alkaline batteries / Auto Power off
6. Weights: 115g (Including Batteries)
7. Dimension(mm): 124 (height) X 56 (width) X 41 (thickness) MAX
8. Audible warnings: 3 steps beep warning of alcohol detection with LED display
9. Available color: Silver / Red
10. Certificate: CE, FDA 510K listed, DOT, Australian Standard
Breathalyzer with Pre-Calibrated
Replaceable Sensor Module.
No Calibration Service required!
Contents
1x Breathalyzer
2x AA size Alkaline Batteries
5x Mouthpiece
1x Pouch
1x Hand strap
1x Manual
PACKAGE
50pcs/Carton *Size: 615 x 456 x 331(mm) / Weight: 18kg
1/2
What is a "Pre-Calibrated Replaceable Sensor Module"?
Sentech Korea is the first breathalyzer company to introduce pre-calibrated
replaceable modules (patent-pending) to the market. One of the main problems
with using breathalyzers in critical applications is that the alcohol sensor, no
matter what type, requires periodic re-calibration. Unfortunately, the recalibration process requires that the breathalyzer be physically mailed or taken to
a professional service center, at which point the device must be evaluated and
proper steps must be taken for calibration with an expensive simulator system.
The process is costly for both consumer and service center, and the delay of
processing and shipping back-and-forth can be quite a loss. The Pre-Calibrated
Replaceable Alcohol Sensor Module can eliminate the delays and complications of
re-calibration by allowing you to simply "snap out" an old module and "snap in" a
new module. This way, you can get back to reliable, accurate testing in a matter
of seconds!
*M.O.Q. 200pcs per order
*Sample will be available when freight charge collect.
*Over 3K pcs order’s case, we will provide buyer designed gift box and logo imprinted without extra charge.
Please contact
Zip code: 413-832
63-23 Sinchon-Ri, Gyoha-Eup, Paju-Si, Kyunggi-Do, Korea
TEL: 82-31-8071-4400
FAX: 82-31-8071-4411
URL: www.sentechkorea.com
E-mail: shkim@sentechkorea.com
2/2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising