Manufacturer`s Specifications

Manufacturer`s Specifications
Machine Features
Technical Specification
Product Description
Physical Machine Dimensions
Printing
Width
5.20 m (205 in)
Length
10.8 m (425 in)
Maximum Substrate Weight
20 kg/44 lbs at full table speed
10 kg/22 lbs using ¾ auto handling option
Height
2.2 m (87 in)
l Maximum substrate thickness 50 mm (2 in) in manual mode
10 mm (0.4 in) using automation
Machine Footprint
5.03 m (198 in) (not including tanks) x 10.83 (426 in)
x 2.13 m (84 in) to include, safety zone door opening
access plus chiller.
Throughputs & Modes
16 pass bi-di 250 m2/hr Satin Finish 50 Beds/hr
16 pass uni-di 180 m2/hr Satin Finish 36 Beds/hr
16 pass bi-di 220 m2/hr Gloss Finish 44 Beds/hr
16 pass uni-di 150 m2/hr Gloss Finish 30 Beds/hr
l Maximum substrate weight:
20 kg (44 lbs) in manual mode
10 kg (22 lbs) using automation
Weight
6000 kgs (13228 lbs)
Console
Onset S20 has a separate control console
n Flatbed
inkjet printing press
l Maximum print area 3.14 m x
1.6 m (123.6 in x 63 in)
n Operator
console including screen,
keyboard and mouse
n ¾
Auto-load option
l Manual lay table
l Auto-unloader
l Multi-sheet feed facility.
n 2
x UV curing lamps
n Uni-directional
and
bi-directional print
n
UV curing inks
n
Precision motion control system
n
Up to 250 m2/hr throughput
n
Full width print heads
n
Gloss printing options
n
Double-ended register pins for accurate loading
n
Moving vacuum table for simple sheet set up
n
Automation available
Customer Support
The Inca support team provides technical
assistance by phone, on-line and at your
facility. Whether delivering engineering
support, applications assistance or
general advice, the Inca Support team
will help you to resolve problems
efficiently and maximise the uptime on
your equipment.
Including:
l Installation kit
l Operator training
l Operator manual
l RIP training
User Interface
Console
Free-standing console with TFT screen, mouse & keyboard
Media
Max Print Size
3.14 m x 1.6 m (123.6 in x 63 in)
Max Substrate Thickness
50 mm (2 in) in manual mode
10 mm (0.4 in) using automation
Cleaning/Treatment
Substrate should be free of dust
Solutions are available from Fujifilm Sericol
for pre-treatment and to promote adhesion
Machine Configurations Automation options available
RIP
RIP Hardware
PC not included with machine
RIP Software
Wasatch or ColorGATE RIP software available
Requirements
Machine Power
380-480V 3 phase 50/60 Hz @ 150A per phase
Chiller Power
380-480V 3 phase 50/60 Hz @ 30A per phase
Compressed Air
6 Bar, 0.3 m3/min, ISO8573.1: Class 1.4.1
Network
Minimum 1000 Base T
Environment
Temperature
20-30 °C Ambient
Humidity
< 80% RH (non-condensing)
A wide range of rigid materials and flexibles including plastics,
paper, corrugated and display board
Standards
EMC
BS EN 61000-6-2:2001 (Immunity)
BS EN 61000-6-4:2001 (Emissions)
Heads
26 printheads per colour
Resolution
600-1000 dpi
Safety
UL Compliant (not approved)
CE Low Voltage and Machinery Directives
Meets the requirements for compliance with CSA SPE-1000
Media
Printing Technology
Inks and Curing
Inks
Choice of configurations: CMYK, Light Cyan, Light
Magenta or White using Fujifilm Sericol UV cure inks
Curing
Dual mercury UV lamps
Ink Tanks
Top loading 4 litre bulk tanks
511 Coldhams Lane, Cambridge, CB1 3JS Tel: +44 (0)1223 577800 Fax: +44 (0)1223 577801 Email: info@incadigital.com
Developing the future of inkjet
Setting new standards for speed and quality
Onset S20 continues the quality step change created by the launch of the Inca Onset. Using full-width printhead arrays, it
delivers high quality, high speed output on rigid and flexible materials. Precision motion and controls systems enable the
S20 to deliver the quality and consistency for which Inca equipment has become renowned.
With software options such as Inca’s PRC available, handling complex jobs is now simpler. Using Inca’s signature moving table
technology, the S20’s vacuum table is capable of running a wide range of materials. New and innovative UV lamp controls
mean that the S20 can deliver a variety of print finishes, from satin through to gloss, making it a versatile production tool for
a wide variety of end applications.
Productivity
Colour Range
Full-width print arrays have made a step change
in digital print productivity, delivering high
quality output at speeds that challenge screen
and short-run offset printing. Offering a number
of handling solutions to minimise changeover
time and increase overall machine productivity,
the Onset S20 can be specified to meet your
business needs.
Outstanding Print Quality
Using 28 ng heads, the S20 delivers a print
quality that will satisfy a wide range of work,
from exhibition graphics, retail display and dump
bins through to large format signage for internal
and external applications.
Economics
With the choice of light cyan and light magenta
or white to complement the CMYK set, the
S20 offers a wide colour gamut, plus increased
accuracy on key spot colours. For those requiring
smooth skin tones at close viewing, the light
colours will be invaluable, whilst the six colour
set helps hit those difficult house colours.
Environmental Credentials
Components are responsibly sourced and the
printers incorporate controls to change to standby
power without impacting on productivity. UV ink
technology provides VOC-free printing and
reduces the wastage associated with the
clean-down and set-up of traditional printing
technologies.
Print Finish
Whether moving work from a digital press,
a screen press or an offset press, the S20 will
provide an economical solution for jobs up to 300
sheets. With the option of either manual loading
or automation, job set-up and changeover is
simple and fast. Able to deliver an outstanding
50 full beds an hour, or 150-off 60” x 40” prints,
this is a key production tool for your business.
Job Flow and Processing
With a choice of RIP solutions offering colour
control plus options for variable data handling,
cutter guides and proofing, jobs can be smoothly
managed from the studio through to the
finishing operation. Inca PRC software is also
available to improve job scheduling.
Reliability
Operator selection of satin through to gloss,
allows the correct print finish to be selected
for the end application. The combination
of high gloss, six colour and the associated
wider colour gamut, allows even the most
demanding customer to be satisfied.
Material Selection
S20 is designed to accommodate a range of
materials for the wide format and POP market.*
This includes the more usual papers and
plastics, but with a 50 mm print height, can
also embrace more unusual substrates such as
wood, glass and rigid plastics.
Response Times
Designed to give you production output 24/7
your team will be given the skills to run and
maintain your Onset S20 to provide reliable
performance. On-board software, such as
nozzle mapping, assists with increased uptime
and print quality control.
Control Console/User Interface
A free-standing operator console provides all
the essential data required to run, monitor and
maintain the machine. Simple print queues
with thumbnails provide job information
whilst maintenance screens offer up-to-date
information on system condition and faults.
* Substrates should be tested for suitability before use, since they vary from different suppliers and factories and can display a wide variety of properties
Uptime is critical to a machine with this print
capacity and this is reflected in the support
contracts offered for this press. After the
warranty period, Inca’s Service Contracts
offer a variety of response levels to keep you
running and delivering your customers’ jobs.
Setting new standards for speed and quality
Onset S20 continues the quality step change created by the launch of the Inca Onset. Using full-width printhead arrays, it
delivers high quality, high speed output on rigid and flexible materials. Precision motion and controls systems enable the
S20 to deliver the quality and consistency for which Inca equipment has become renowned.
With software options such as Inca’s PRC available, handling complex jobs is now simpler. Using Inca’s signature moving table
technology, the S20’s vacuum table is capable of running a wide range of materials. New and innovative UV lamp controls
mean that the S20 can deliver a variety of print finishes, from satin through to gloss, making it a versatile production tool for
a wide variety of end applications.
Productivity
Colour Range
Full-width print arrays have made a step change
in digital print productivity, delivering high
quality output at speeds that challenge screen
and short-run offset printing. Offering a number
of handling solutions to minimise changeover
time and increase overall machine productivity,
the Onset S20 can be specified to meet your
business needs.
Outstanding Print Quality
Using 28 ng heads, the S20 delivers a print
quality that will satisfy a wide range of work,
from exhibition graphics, retail display and dump
bins through to large format signage for internal
and external applications.
Economics
With the choice of light cyan and light magenta
or white to complement the CMYK set, the
S20 offers a wide colour gamut, plus increased
accuracy on key spot colours. For those requiring
smooth skin tones at close viewing, the light
colours will be invaluable, whilst the six colour
set helps hit those difficult house colours.
Environmental Credentials
Components are responsibly sourced and the
printers incorporate controls to change to standby
power without impacting on productivity. UV ink
technology provides VOC-free printing and
reduces the wastage associated with the
clean-down and set-up of traditional printing
technologies.
Print Finish
Whether moving work from a digital press,
a screen press or an offset press, the S20 will
provide an economical solution for jobs up to 300
sheets. With the option of either manual loading
or automation, job set-up and changeover is
simple and fast. Able to deliver an outstanding
50 full beds an hour, or 150-off 60” x 40” prints,
this is a key production tool for your business.
Job Flow and Processing
With a choice of RIP solutions offering colour
control plus options for variable data handling,
cutter guides and proofing, jobs can be smoothly
managed from the studio through to the
finishing operation. Inca PRC software is also
available to improve job scheduling.
Reliability
Operator selection of satin through to gloss,
allows the correct print finish to be selected
for the end application. The combination
of high gloss, six colour and the associated
wider colour gamut, allows even the most
demanding customer to be satisfied.
Material Selection
S20 is designed to accommodate a range of
materials for the wide format and POP market.*
This includes the more usual papers and
plastics, but with a 50 mm print height, can
also embrace more unusual substrates such as
wood, glass and rigid plastics.
Response Times
Designed to give you production output 24/7
your team will be given the skills to run and
maintain your Onset S20 to provide reliable
performance. On-board software, such as
nozzle mapping, assists with increased uptime
and print quality control.
Control Console/User Interface
A free-standing operator console provides all
the essential data required to run, monitor and
maintain the machine. Simple print queues
with thumbnails provide job information
whilst maintenance screens offer up-to-date
information on system condition and faults.
* Substrates should be tested for suitability before use, since they vary from different suppliers and factories and can display a wide variety of properties
Uptime is critical to a machine with this print
capacity and this is reflected in the support
contracts offered for this press. After the
warranty period, Inca’s Service Contracts
offer a variety of response levels to keep you
running and delivering your customers’ jobs.
Setting new standards for speed and quality
Onset S20 continues the quality step change created by the launch of the Inca Onset. Using full-width printhead arrays, it
delivers high quality, high speed output on rigid and flexible materials. Precision motion and controls systems enable the
S20 to deliver the quality and consistency for which Inca equipment has become renowned.
With software options such as Inca’s PRC available, handling complex jobs is now simpler. Using Inca’s signature moving table
technology, the S20’s vacuum table is capable of running a wide range of materials. New and innovative UV lamp controls
mean that the S20 can deliver a variety of print finishes, from satin through to gloss, making it a versatile production tool for
a wide variety of end applications.
Productivity
Colour Range
Full-width print arrays have made a step change
in digital print productivity, delivering high
quality output at speeds that challenge screen
and short-run offset printing. Offering a number
of handling solutions to minimise changeover
time and increase overall machine productivity,
the Onset S20 can be specified to meet your
business needs.
Outstanding Print Quality
Using 28 ng heads, the S20 delivers a print
quality that will satisfy a wide range of work,
from exhibition graphics, retail display and dump
bins through to large format signage for internal
and external applications.
Economics
With the choice of light cyan and light magenta
or white to complement the CMYK set, the
S20 offers a wide colour gamut, plus increased
accuracy on key spot colours. For those requiring
smooth skin tones at close viewing, the light
colours will be invaluable, whilst the six colour
set helps hit those difficult house colours.
Environmental Credentials
Components are responsibly sourced and the
printers incorporate controls to change to standby
power without impacting on productivity. UV ink
technology provides VOC-free printing and
reduces the wastage associated with the
clean-down and set-up of traditional printing
technologies.
Print Finish
Whether moving work from a digital press,
a screen press or an offset press, the S20 will
provide an economical solution for jobs up to 300
sheets. With the option of either manual loading
or automation, job set-up and changeover is
simple and fast. Able to deliver an outstanding
50 full beds an hour, or 150-off 60” x 40” prints,
this is a key production tool for your business.
Job Flow and Processing
With a choice of RIP solutions offering colour
control plus options for variable data handling,
cutter guides and proofing, jobs can be smoothly
managed from the studio through to the
finishing operation. Inca PRC software is also
available to improve job scheduling.
Reliability
Operator selection of satin through to gloss,
allows the correct print finish to be selected
for the end application. The combination
of high gloss, six colour and the associated
wider colour gamut, allows even the most
demanding customer to be satisfied.
Material Selection
S20 is designed to accommodate a range of
materials for the wide format and POP market.*
This includes the more usual papers and
plastics, but with a 50 mm print height, can
also embrace more unusual substrates such as
wood, glass and rigid plastics.
Response Times
Designed to give you production output 24/7
your team will be given the skills to run and
maintain your Onset S20 to provide reliable
performance. On-board software, such as
nozzle mapping, assists with increased uptime
and print quality control.
Control Console/User Interface
A free-standing operator console provides all
the essential data required to run, monitor and
maintain the machine. Simple print queues
with thumbnails provide job information
whilst maintenance screens offer up-to-date
information on system condition and faults.
* Substrates should be tested for suitability before use, since they vary from different suppliers and factories and can display a wide variety of properties
Uptime is critical to a machine with this print
capacity and this is reflected in the support
contracts offered for this press. After the
warranty period, Inca’s Service Contracts
offer a variety of response levels to keep you
running and delivering your customers’ jobs.
Machine Features
Technical Specification
Product Description
Physical Machine Dimensions
Printing
Width
5.20 m (205 in)
Length
10.8 m (425 in)
Maximum Substrate Weight
20 kg/44 lbs at full table speed
10 kg/22 lbs using ¾ auto handling option
Height
2.2 m (87 in)
l Maximum substrate thickness 50 mm (2 in) in manual mode
10 mm (0.4 in) using automation
Machine Footprint
5.03 m (198 in) (not including tanks) x 10.83 (426 in)
x 2.13 m (84 in) to include, safety zone door opening
access plus chiller.
Throughputs & Modes
16 pass bi-di 250 m2/hr Satin Finish 50 Beds/hr
16 pass uni-di 180 m2/hr Satin Finish 36 Beds/hr
16 pass bi-di 220 m2/hr Gloss Finish 44 Beds/hr
16 pass uni-di 150 m2/hr Gloss Finish 30 Beds/hr
l Maximum substrate weight:
20 kg (44 lbs) in manual mode
10 kg (22 lbs) using automation
Weight
6000 kgs (13228 lbs)
Console
Onset S20 has a separate control console
n Flatbed
inkjet printing press
l Maximum print area 3.14 m x
1.6 m (123.6 in x 63 in)
n Operator
console including screen,
keyboard and mouse
n ¾
Auto-load option
l Manual lay table
l Auto-unloader
l Multi-sheet feed facility.
n 2
x UV curing lamps
n Uni-directional
and
bi-directional print
n
UV curing inks
n
Precision motion control system
n
Up to 250 m2/hr throughput
n
Full width print heads
n
Gloss printing options
n
Double-ended register pins for accurate loading
n
Moving vacuum table for simple sheet set up
n
Automation available
Customer Support
The Inca support team provides technical
assistance by phone, on-line and at your
facility. Whether delivering engineering
support, applications assistance or
general advice, the Inca Support team
will help you to resolve problems
efficiently and maximise the uptime on
your equipment.
Including:
l Installation kit
l Operator training
l Operator manual
l RIP training
User Interface
Console
Free-standing console with TFT screen, mouse & keyboard
Media
Max Print Size
3.14 m x 1.6 m (123.6 in x 63 in)
Max Substrate Thickness
50 mm (2 in) in manual mode
10 mm (0.4 in) using automation
Cleaning/Treatment
Substrate should be free of dust
Solutions are available from Fujifilm Sericol
for pre-treatment and to promote adhesion
Machine Configurations Automation options available
RIP
RIP Hardware
PC not included with machine
RIP Software
Wasatch or ColorGATE RIP software available
Requirements
Machine Power
380-480V 3 phase 50/60 Hz @ 150A per phase
Chiller Power
380-480V 3 phase 50/60 Hz @ 30A per phase
Compressed Air
6 Bar, 0.3 m3/min, ISO8573.1: Class 1.4.1
Network
Minimum 1000 Base T
Environment
Temperature
20-30 °C Ambient
Humidity
< 80% RH (non-condensing)
A wide range of rigid materials and flexibles including plastics,
paper, corrugated and display board
Standards
EMC
BS EN 61000-6-2:2001 (Immunity)
BS EN 61000-6-4:2001 (Emissions)
Heads
26 printheads per colour
Resolution
600-1000 dpi
Safety
UL Compliant (not approved)
CE Low Voltage and Machinery Directives
Meets the requirements for compliance with CSA SPE-1000
Media
Printing Technology
Inks and Curing
Inks
Choice of configurations: CMYK, Light Cyan, Light
Magenta or White using Fujifilm Sericol UV cure inks
Curing
Dual mercury UV lamps
Ink Tanks
Top loading 4 litre bulk tanks
511 Coldhams Lane, Cambridge, CB1 3JS Tel: +44 (0)1223 577800 Fax: +44 (0)1223 577801 Email: info@incadigital.com
Developing the future of inkjet
Machine Features
Technical Specification
Product Description
Physical Machine Dimensions
Printing
Width
5.20 m (205 in)
Length
10.8 m (425 in)
Maximum Substrate Weight
20 kg/44 lbs at full table speed
10 kg/22 lbs using ¾ auto handling option
Height
2.2 m (87 in)
l Maximum substrate thickness 50 mm (2 in) in manual mode
10 mm (0.4 in) using automation
Machine Footprint
5.03 m (198 in) (not including tanks) x 10.83 (426 in)
x 2.13 m (84 in) to include, safety zone door opening
access plus chiller.
Throughputs & Modes
16 pass bi-di 250 m2/hr Satin Finish 50 Beds/hr
16 pass uni-di 180 m2/hr Satin Finish 36 Beds/hr
16 pass bi-di 220 m2/hr Gloss Finish 44 Beds/hr
16 pass uni-di 150 m2/hr Gloss Finish 30 Beds/hr
l Maximum substrate weight:
20 kg (44 lbs) in manual mode
10 kg (22 lbs) using automation
Weight
6000 kgs (13228 lbs)
Console
Onset S20 has a separate control console
n Flatbed
inkjet printing press
l Maximum print area 3.14 m x
1.6 m (123.6 in x 63 in)
n Operator
console including screen,
keyboard and mouse
n ¾
Auto-load option
l Manual lay table
l Auto-unloader
l Multi-sheet feed facility.
n 2
x UV curing lamps
n Uni-directional
and
bi-directional print
n
UV curing inks
n
Precision motion control system
n
Up to 250 m2/hr throughput
n
Full width print heads
n
Gloss printing options
n
Double-ended register pins for accurate loading
n
Moving vacuum table for simple sheet set up
n
Automation available
Customer Support
The Inca support team provides technical
assistance by phone, on-line and at your
facility. Whether delivering engineering
support, applications assistance or
general advice, the Inca Support team
will help you to resolve problems
efficiently and maximise the uptime on
your equipment.
Including:
l Installation kit
l Operator training
l Operator manual
l RIP training
User Interface
Console
Free-standing console with TFT screen, mouse & keyboard
Media
Max Print Size
3.14 m x 1.6 m (123.6 in x 63 in)
Max Substrate Thickness
50 mm (2 in) in manual mode
10 mm (0.4 in) using automation
Cleaning/Treatment
Substrate should be free of dust
Solutions are available from Fujifilm Sericol
for pre-treatment and to promote adhesion
Machine Configurations Automation options available
RIP
RIP Hardware
PC not included with machine
RIP Software
Wasatch or ColorGATE RIP software available
Requirements
Machine Power
380-480V 3 phase 50/60 Hz @ 150A per phase
Chiller Power
380-480V 3 phase 50/60 Hz @ 30A per phase
Compressed Air
6 Bar, 0.3 m3/min, ISO8573.1: Class 1.4.1
Network
Minimum 1000 Base T
Environment
Temperature
20-30 °C Ambient
Humidity
< 80% RH (non-condensing)
A wide range of rigid materials and flexibles including plastics,
paper, corrugated and display board
Standards
EMC
BS EN 61000-6-2:2001 (Immunity)
BS EN 61000-6-4:2001 (Emissions)
Heads
26 printheads per colour
Resolution
600-1000 dpi
Safety
UL Compliant (not approved)
CE Low Voltage and Machinery Directives
Meets the requirements for compliance with CSA SPE-1000
Media
Printing Technology
Inks and Curing
Inks
Choice of configurations: CMYK, Light Cyan, Light
Magenta or White using Fujifilm Sericol UV cure inks
Curing
Dual mercury UV lamps
Ink Tanks
Top loading 4 litre bulk tanks
511 Coldhams Lane, Cambridge, CB1 3JS Tel: +44 (0)1223 577800 Fax: +44 (0)1223 577801 Email: info@incadigital.com
Developing the future of inkjet
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising