Fabricator® 252i Portable System Part No. W1004401

Fabricator® 252i Portable System Part No. W1004401
MULTI PROCESS WELDING SYSTEM
®
Fabricator 252i
Portable System
Part No. W1004401
®
Comes Complete with:
V Fabricator 252i Power Supply
V 15 ft (4.6 m) Tweco Spray Master
250 Amp MIG Gun
V Contact Tips (1 each):
• . 030 (0.8 mm)
• .035 (0.9 mm) Installed
• .045 (1.2 mm)
V Victor EDGE™ Argon Flow Gauge
& 12.5 ft (3.8 m) Hose
V T weco WeldSkill 200 Amp electrode
holder with 13 ft (4 m) lead
®
®
®
®
V Tweco WeldSkill 200 Amp ground
clamp with 10 ft (3 m) lead
V Drive Rolls:
• . 035" / .045" V Groove Lower & Flat Upper
(Fitted)
• .023" / .030" / .035" V Groove
• . 045" Flux Cored Roll
V Operator’s Manual
V 9 ft (2.7 m) Power Cord & NEMA
6-50P 230V AC Plug
V .023" (0.6 mm) Outlet Guide
3163339
QUICK Specifications
PROCESSES
MIG (GMAW)
Flux Cored (FCAW)
Lift TIG (GTAW)
STICK (SMAW)
APPLICATIONS
Light Industrial Manufacturing
Mechanical Contractors
On-Site & Portable Welding Applications
Automotive Repairs & Customization
Farms & Ranches
Training Institutions
Maintenance & Repairs
Rated Output
250A / 26.5V @ 40% Duty Cycle
200A / 24V @ 60% Duty Cycle
150A / 21.5V @ 100% Duty cycle
MAX. OPEN CIRCUIT VOLTAGE
72V DC
AMPERAGE RANGE
5-300 A
Wire FEED SPEED
67 - 700 ipm (1.7 - 17.8 m/min)
WEIGHT
65.3 lbs (29.6 kg)
ORDER INFORMATION
Part No: W1004401
Description: Fabricator 252i Portable System
Three Process Capability:
Other Features:
V P FC Power Factor Correction: Up to 40%
power savings compared to conventional
MIG welders.
MIG:
V Infinite Voltage Control with optimized
V Digital Meters: Voltage and Amperage;
starting performance.
Preview and Hold capability.
V Inductance Control for arc stability and
V Excellent Portability: Lightweight,
spatter control.
less than 66 lbs.
V Tweco MIG Gun w/15 ft cable and industry
V Comprehensive Setup Chart: Weld set up guide
standard Tweco #4 connection.
for optimum welding performance over a wide
range of materials and shielding gases.
V Durable Metal Feed Plate features 2 roll drive
system, quick change reversible drive rolls and V Trigger Control: 4T (Latch) eliminates
easy-to-set single scaled wire tension knob.
operator fatigue.
V Remote Receptacle: Enables connection of
V 4", 8", or 12" Spool Capacity allows easy
remote control devices and Spool Gun.
installation of wire spool sizes.
V Quick Change Polarity: Simple quick change
V Spool Gun ready.
polarity (no tools required) from the front of
the power source.
STICK:
V Adjustable Arc Force Control for optimum
V Overload Protection: Shuts down the power
STICK electrode performance.
source to protect the internal electrical
components from overheating.
V Excellent 6010 welding electrode performance.
V IP23S: Suitable for outdoor use.
TIG:
V Advanced Features: Includes
V Lift TIG Start: Provides TIG arc starting
Pre & Post Flow, Down Slope,
without use of high frequency.
Hot Start, Spot, Stitch, Burn Back,
Wire Sharp, Arc Hour Runtime,
Run-In Speed.
MIG (GMAW/FCAW), STICK (SMAW), TIG (GTAW).
U.S. Customer Care: 800-426-1888 / fax 800-535-0557
www.thermalarc.com
Control
Panel
Power Indicator
Fault Indicator
The Green power indicator
illuminates in the presence of
power on the control circuitry
The Fault will illuminate yellow
when any of the faults are detected
Process Mode Button
Digital Meters WFS /
AMPS and Volts
Depress to change process:
• MIG (GMAW/FCAW)
• TIG (GTAW)
• STICK (SMAW)
Left Knob
Adjust weld Process value
• MIG - Wirefeed speed
• TIG - Amperage
• STICK - Amperage
Trigger Latch Button
Right Knob
Primary function to set MIG volts
• MIG - Push (1 sec) for Inductance
• STICK - Push (1 sec) for Arc Force
or Dig feature
Advanced Feature Button
Depress & Release to enter or exit
Depress & Hold to purge shielding gas
Depress to change Trigger Fn:
• 2T (On/Off)
• 4T (Trigger Hold)
- O nce the weld arc has started,
release the trigger and
continue welding
- A ctivate the trigger again
or brake the welding arc to
finish welding
A D VA N C E D F E ATUR E S
The Fabricator ® 252i welding characteristics are optimized to supply the best welding performance whether in the MIG, TIG or Stick modes. In those situations when you
need more control for special applications or productivity enhancements go to the Advanced Features.
FUNCTION
Operator Controls
MIG
Local / Remote
TIG
Local / Remote
Preflow Time
0 - 5.0 sec.
0 - 5.0 sec.
–
–
Run-In
30 - 150%
–
–
Slower or higher percentage of the set wire feed speed before the
arc is initiated to optimize arc starting
Spot Weld
On/Off - Time
–
–
Enables Spot Welding
Stitch Weld
On/Off - Time (Stitch/Dwell)
–
–
Enables Stitch or Skip Welding
Hot Start
STICK
Local / Remote
DESCRIPTION
Determines whether the control is at the machine or from
a remote device
The time shielding gas is turned on before the arc is initiated
On/Off - Time - Amps Higher burst of amps to help initiate the stick electrode arc
Down Slope
–
0 - 30.0 sec.
–
Eliminates the crater that can form at the end of the weld
Burnback
0 - 1.0 sec
–
–
Eliminates the wire from sticking in the weld puddle
Wire Sharp
OFF / ON
–
–
Sharpens the wire ensuring good arc start repeatability
Postflow Time
0 - 30.0 sec.
0 - 30.0 sec.
–
The time shielding gas remains on after arc is turned off
Wire Feed Speed Units
IPM / mpm
–
Can be set to "Inches per Minute" or "Meters per Minute"
Arc Hour Accumulated Run Time
0 - 10,000 hrs.
0 - 10,000 hrs.
0 - 10,000 hrs.
Records welding arc time
Restore Factory Defaults
No / Yes
No / Yes
No / Yes
Returns power source to the original factory settings
–
In addition, the Advanced Features Button can be used to initiate a 30 second gas line purge function to facilitate gas tank connection and setup.
Simply press and hold the button for approximately (2) seconds, gas will purge for (30) seconds. It will stop if pressed again.
page 2
U.S. Customer Care: 800-426-1888 / fax 800-535-0557
Canada Customer Care: 905-827-4515 / fax 800-588-1714
System
Features
Metal 2 Roll wire drive
system with quick change
drive rolls and single
tension arm
Control Panel (Refer Left)
Comprehensive Welding
Setup Chart for welding
process parameters
8 pin Remote Receptacle
for remote devices or
MIG Gun
MIG Gun Connection,
Tweco #4
Gas Outlet for Spool
Gun or TIG Torch
10 pin Receptacle for
Spool Gun
Heavy Duty Welding
output terminals with
polarity reversal
capability
Multi Process MIG System Packages
Fabricator 252i Portable System*
Part No. W1004401
®
Comes Complete with:
1
2
3
4
1
5
2
6
3
7
8
4
9
5
6
8
7
* MIG System package with “out of the box”
additional Stick welding capabilities
page 3
9
Fabricator 252i Power Supply
Tweco® WeldSkill® 200 Amp Ground
Clamp with 10 ft (3 m) Lead
Victor ® EDGE™ Argon Flow Gauge
Tweco WeldSkill 200 Amp Electrode
Holder with 13 ft (4 m) Lead
Drive Rolls:
.035" / .045" V Groove Lower & Flat Upper (Fitted)
.023" / .030" / .035" V Groove
.045" Flux Cored Roll
Contact Tips (1 each):
.030 (0.8 mm), .035 (0.9 mm), .045 (1.2 mm)
Outlet Guide, .023" (0.6mm)
15 ft (4.6 m) Tweco Spray Master ® 250 Amp
MIG Gun
Gas Hose, 12.5 ft (3.8 m), Male 5/8-18
9 ft (2.7 m) Power Cord and NEMA
6-50P 230V AC Plug (not shown)
Operator’s Manual (not shown)
Thermal Arc Cap (not shown)
Fabricator 252i Portable System
w/Single Cylinder Cart*
Part No. W1004402
®
Fabricator 252i Portable System
w/Dual Cylinder Cart / Deluxe*
Part No. W1004403
®
4
5
2
3
2
1
1
3
16
12
4
6
15
8
6
7
11
5
13
7
8
10
9
9
Comes Complete with:
1
2
3
4
5
6
7
8
9
10
11
12
Fabricator 252i Power Supply
Single Cylinder Professional Cart
Tweco Parts Box
Tweco® WeldSkill® 200 Amp Ground Clamp with 10 ft (3 m) Lead
Victor ® EDGE™ Argon Flow Gauge
Tweco WeldSkill 200 Amp Electrode Holder with 13 ft (4 m) Lead
Drive Rolls:
.035" / .045" (0.9 mm / 1.2 mm) V Groove Lower & Flat Upper (Fitted)
.023" / .030" / .035" V Groove
.045" Flux Cored Roll
Contact Tips (1 each):
.030 (0.8 mm), .035 (0.9 mm), .045 (1.2 mm)
Outlet Guide, .023" (0.6mm)
15 ft (4.6 m) Tweco Spray Master ® 250 Amp MIG Gun
Gas Hose, 12.5 ft (3.8 m), Male 5/8-18
Accessory / Storage Drawer
9 ft (2.7 m) Power Cord and NEMA 6-50P 230V AC Plug (not shown)
Operator’s Manual (not shown)
Thermal Arc Cap (not shown)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
* Notes:
1. The cart is shipped as a flat pack.
2. Three screws needed to assemble cart.
3. Three screws needed to fix power supply to cart.
4. Power Source box and cart box to be strapped together.
5. Gas cylinder(s) not included.
International Customer Care: 940-381-1212 / FAX 940-483-8178
www.thermalarc.com
10
11
12
Comes Complete with:
14
Fabricator 252i Power Supply
Dual Cylinder Professional Cart
Tweco Parts Boxes (Qty 2)
TIG Rod Storage Canister
Stick Electrode Storage Canister
Tweco® WeldSkill® 200 Amp Ground Clamp with 10 ft (3 m) Lead
Victor ® EDGE™ Argon Flow Gauge (Qty 2, TIG and MIG)
Tweco WeldSkill 200 Amp Electrode Holder with 13 ft (4 m) Lead
Tweco 200 Amp Spool Gun with 25 ft (7.6 m) Lead
Drive Rolls:
.035" / .045" (0.9 mm / 1.2 mm) V Grooved Lower & Flat Upper (Fitted)
.023" / .030" / .035" V Groove
.045" Flux Cored Roll
Contact Tips (1 each):
.030 (0.8 mm), .035 (0.9 mm), .045 (1.2 mm)
Outlet Guide, .023" (0.6mm)
15 ft (4.6 m) Tweco Spray Master® 250 Amp MIG Gun
TIG Torch & Accessories
Gas Hoses, 12.5 ft (3.8 m), Male 5.8-18 (Qty 2)
Accessory / Storage Drawer
9 ft (2.7 m) Power Cord and NEMA 6-50P 230V AC Plug (not shown)
Operator’s Manual (not shown)
Thermal Arc Cap (not shown)
page 4
S p e c i f i c at i o n s
WELDING DC
Maximum Output
P r i m a r y P o we r
300 Amp
250A / 26.5V @ 40% Duty Cycle
200A / 24V @ 60% Duty cycle
150A / 21.5V @ 100% Duty Cycle
230A / 29.2V @ 40% Duty Cycle
200A / 28V @ 60% Duty cycle
150A / 26V @ 100% Duty Cycle
250A / 20V @ 40% Duty Cycle
200A / 18V @ 60% Duty cycle
150A / 16V @ 100% Duty Cycle
5-300 A
14-30 V
67-700 ipm (1.7 – 17.8 m/min)
1/2" (12.7 mm)
MIG (GMAW/FCAW)
Welding Output @104˚F (40˚C)
STICK (SMAW)
Welding Output @104˚F (40˚C)
TIG (GMAW)
Welding Output @104˚F (40˚C)
Current Range
MIG Welding Voltage Range
Wirefeed Speed Range
Maximum Plate Thickness
Wire Diameter Range
Mild Steel:
Stainless Steel:
Aluminum: (with Spool Gun)
Flux cored:
Fitted Feedroll Suits MIG Wire
Warranty Period
Approvals
.023" - .045" (0.6 - 1.2 mm)
.023" - .035" (0.6 - 0.9 mm)
.030" - 3/64" (0.8 - 1.2 mm)
.030" - .045" (0.8 - 1.2 mm)
.035" - .045" (0.9 - 1.2 mm)
3 Years*
IEC 60974-1, ETL
Protection Class
IP23S
di m en s i o n s a nd weig h t
Dimensions H x W x D
H 17.32" x W 10.23" x D 23.62"
(440 mm x 260 mm x 600 mm)
Weight
65.3 lbs (29.6 kg)
Primary Voltage
Supply Voltage Range
Number of Phases
Supply Frequency
Supply Plug
Rated kVA @ 250 Amps
Lead Cord Length
Maximum Input Current
Nominal 208/230 VAC
187-276 VAC
Single Phase
50/60 Hz
NEMA 6-50P
8.2 kVA
9 ft (2.7 m)
39.5 Amps
Repl a ce m en t I t e m s
& C o n s u m a b le s
Tweco® Spray Master® 250 Amp MIG Gun, 15 ft
20709S
Nozzle (23-50)
1230-1110
Diffuser (52FN)
1520-1102
Liner (42-4045-15)
1420-1123
Contact Tips
Tweco 14-Series
Tweco WeldSkill 200 Amp Electrode Holder WS252E-13
®
Tweco WeldSkill 200 Amp Ground Clamp
WS252G-10
ESS3-FG-580 Argon Flow Gauge
0781-5120
Gas Hose, 12.5 ft Male 5/8-18
W4013900
TIG Torch & Accessories
W4013600
Tweco Spool Gun, 200 Amp, 25 ft
1027-1391
Basic Utility Cart
W4014700
Single Cylinder Cart
W4015001
Dual Cylinder Cart
W4015002
Roll Cage
W4015101
* Limited Warranty, refer to warranty schedule.
D R I V E R O L L S & O U T L ET G U I D E S
HARD
(0.23 – .045)
TOP
FEED
ROLL
BOTTOM
FEED
ROLL
FLUX CORED
(.030 / .035)
FLUX CORED
(.045)
SOFT
(3/64")
Drive Rolls
Wire Size
Wire Type
Top Feed Roll
Bottom Feed Roll
.023" (0.6 mm)
HARD
407002-001
407002-002
.030" (0.8 mm)
HARD
407002-001
407002-002
.035" (0.9 mm)
HARD
407002-001
407002-002
.045" (1.2 mm)
HARD
407002-001
171115-003
.030" (0.8 mm)
FLUX CORED
375832
407002-002
.035" (0.9 mm)
FLUX CORED
375832
407002-002
.045" (1.2 mm)
FLUX CORED
407002-001
170924-010
3/64" (1.2 mm)
SOFT
408023-002
408023-002
Outlet Guides
Outlet Guide, .030" - .045" (0.8 mm - 1.2 mm)
872606
Outlet Guide, .023" (0.6 mm)
872605
International Customer Care: 940-381-1212 / FAX 940-483-8178
www.thermalarc.com
page 5
ordering in formation
Equipment Option
Part No.
Description
Fabricator ® 252i Portable System
W1004401
Includes Fabricator 252i, Tweco Spraymaster 250 Amp MIG Gun, Victor EDGE™
Argon Flow Gauge & 12.5 ft (3.8 m) Hose, Tweco Electrode Holder & Ground Clamp,
Drive Rolls & Contact Tips, Operator’s Manual
Fabricator 252i Portable System
w/Single Cylinder Cart
W1004402
Includes contents of W1004401 with Single Cylinder Cart (W4015001)
Fabricator 252i Portable System
w/Dual Cylinder Cart/Deluxe
W1004403
Includes contents of W1004401 with TIG Torch & accy. (W4013600), Spool Gun (1027-1391)
and Dual Cylinder Cart (W4015002)
TIG Torch &
Accessories
(required for
TIG welding)
W4013600
TIG Torch, 26, 13 ft, SW/CUR Control, 8 pin and accessory kit with 1/16", 3/32", 1/8"
thoriated tungstens; 1/16", 3/32", 1/8" collets; 1/16", 3/32", 1/8" collet bodies; No. 5, 6, 7
Alumina nozzle; short back cap; long back cap
Spool Gun (required for
aluminum MIG welding)
1027-1391
Tweco Spool Gun 200A, 25 ft (7.6 M) Length, suits 4" (100 mm) spools
Basic Utility Cart
W4014700
Utility Cart, accommodates maximum 7" diameter cylinder
Single Cylinder Cart
W4015001
Single cylinder cart accommodates up to 9" diameter cylinder with accessory drawer and
consumable compartment
Dual Cylinder Cart
W4015002
Dual cylinder cart accommodates up to two 9" diameter cylinders with accessory drawer,
consumable compartments and TIG & Stick Rod Holders
Roll Cage
W4015101
Protective Roll Cage for skidding or carrying (power supply not included)
Foot Control
600285
Contactor On/Off and current control with 15 ft cable and 8-pin male plug
Hand Pendant
10-4014
Contactor On/Off and current control with 25 ft cable and 8-pin male plug
Helmet
4100-1004
TWECO WeldSkill Helmet (USA only)
®
®
Acce s s o r ie s
A Global Cutting & Welding Market Leader™
U.S. Customer Care: 800-426-1888 / fax 800-535-0557 • Canada Customer Care: 905-827-4515 /
International Customer Care: 940-381-1212 / FAX 940-483-8178
Form No. 84-1115 (03/30/12)
© 2012 Thermadyne Industries, Inc.
fax
800-588-1714
www.thermadyne.com
www.thermalarc.com
Printed in U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising