BLDY Software Update Version 2.00

BLDY Software Update Version 2.00
BLDY Ver. 2.00 Software Update – p.1
Baby Lock Destiny
(Model BLDY)
Software Update Version 2.00
September, 2016
Introduction
If the software version of your Destiny (Model BLDY) is earlier than version 2.00, an update program
is now available for download to improve its performance.
Version 2.00 update will provide the following changes:
1.
Improved various pattern editing functions for easier use.
 To learn new features, read the instructions for Version 2.0.
Instruction PDF for the additional feature of Version 2.0
(File size: 726KB)
2.
Improved machine's functionality for the following features or some issues.
 Editing the character patterns in the Embroidery Edit mode
 Resume function
To confirm the software version of your BLDY
1. Press the power switch to "|" to turn on your machine.
2. If the opening movie is played, touch anywhere on the LCD screen.
3. Press
(Machine setting mode key) to display the machine's settings screen.
4. The machine's settings screen appears.
5. Switch the settings screens by using
the machine's program version.
(Previous page key) or
Copyright  2004-2016 Baby Lock USA
Customer Support: 1-800-313-4110
(Next page key) to display
BLDY Ver. 2.00 Software Update – p.2
6. If “Version” shown in the screen is already “2.00” or later, it is not necessary to update your
machine with the software on this page.
If “Version” shown in the screen is “1.13”, “1.20” or “1.22”, follow the procedure [Case 1] to
update your machine.
If “Version” shown in the screen is lower version than 1.13, follow the procedure [Case 2] to
update your machine with the additional tutorial video’s data.
If “Version” shown in the screen is a version number with “#” like “1.13#”, “1.20#” or
“1.22#”, follow the procedure [Case 2] to update your machine with the additional tutorial
video’s data.
Copyright  2004-2016 Baby Lock USA
Customer Support: 1-800-313-4110
BLDY Ver. 2.00 Software Update – p.3
Case 1:
When the software version of your machine is “1.13”, “1.20” or “1.22”, follow the procedure below.
How to download the update program
1. Create a temporary folder (ex. C:\Temp) on your computer to save the update program file to
be downloaded.
2. Click the “Download FILE” below.
3. Select the previously created temporary folder (ex. C:\Temp) where the downloaded file should
be stored.
4. Download the file.
Download FILE (XV_V200_taco_Cmb_P.upf, size: 201 MB)
How to update your machine’s software
You can use a USB Flash drive to update your machine's software.
* * * NOTE * * *
 Do not turn off your machine while the machine is saving the update software to
itself. If the machine's power is turned off while saving the update software, it
may result in damage to the machine.
 Due to the large size of the update file, if you try to update your machine using a
direct computer connection with a USB cable, it could take up to several hours to
complete the installation. For fast and smooth installation, use a 4GB or larger
USB flash drive when updating the machine to version 2.00.
 Check that no data except for the update file is saved on the reformatted USB
Flash drive, before beginning update.
1.
2.
3.
Insert the USB Flash drive into the USB port on the computer.
Copy the update file (XV_V200_taco_Cmb_P.upf) to the USB Flash drive.
Safely remove the USB Flash drive from the USB port on the computer.
Copyright  2004-2016 Baby Lock USA
Customer Support: 1-800-313-4110
BLDY Ver. 2.00 Software Update – p.4
4.
While pressing the "Automatic Threading" button, turn the main power to ON.
The following screen will appear on the LCD.
5.
Press the USB media key.
6.
Insert the USB Flash drive into the primary (top) USB port on the machine. (Wait several
seconds for machine to recognize USB)
7.
Press the LOAD key.
8.
When the message "Upgrade complete" appears, the update file has been loaded.
Copyright  2004-2016 Baby Lock USA
Customer Support: 1-800-313-4110
BLDY Ver. 2.00 Software Update – p.5
9.
10.
11.
12.
Turn the machine off.
Remove USB Flash drive from the USB port on the machine.
Turn the machine on.
Your machine's software has been updated to version 2.00.
Case 2:
When the software version of your machine is a lower version than 1.13 or displaying the version
number with “#” like “1.13#”, follow the procedure below.
How to download the update program
1. Create a temporary folder (ex. C:\Temp) on your computer to save the update program file to
be downloaded.
2. Click the “Download FILE” below.
3. Select the previously created temporary folder (ex. C:\Temp) where the downloaded file should
be stored.
4. Download the file.
[1/2] Download FILE (xv_movie_file_taco_N.upf, size: 567 MB)
[2/2] Download FILE (XV_V200_taco_Cmb_P.upf, size: 201 MB)
How to update your machine’s software
You can use a USB Flash drive to update your machine's software.
There are two update files for updating the machine.
Each update file should be loaded separately into the machine as follows.
Copyright  2004-2016 Baby Lock USA
Customer Support: 1-800-313-4110
BLDY Ver. 2.00 Software Update – p.6
* * * NOTE * * *
 Do not turn off your machine while the machine is saving the update software to
itself. If the machine's power is turned off while saving the update software, it may
result in damage to the machine.
 Connecting a computer to the machine using a USB cable is not available to update
the machine on this update in Case 2. Use a 4GB or larger USB flash drive to update
the machine.
 Check that no data except for the update file is saved on the reformatted USB Flash
drive, before beginning update.
Copyright  2004-2016 Baby Lock USA
Customer Support: 1-800-313-4110
BLDY Ver. 2.00 Software Update – p.7
1.
2.
3.
4.
Insert the USB Flash drive into the USB port on the computer.
Copy the first update file (xv_movie_file_taco_N.upf) to the USB Flash drive.
NOTE:
The USB Flash drive should be a reformatted 4GB or higher flash drive
that contains the first update file only.
Safely remove the USB Flash drive from the USB port on the computer.
While pressing the "Automatic Threading" button, turn the main power to ON.
The following screen will appear on the LCD.
5.
Press the USB media key.
6.
Insert the USB Flash drive into the primary (top) USB port on the machine.
7.
Press the LOAD key.
Copyright  2004-2016 Baby Lock USA
Customer Support: 1-800-313-4110
BLDY Ver. 2.00 Software Update – p.8
8.
When the message "Upgrade complete" appears, the first update file has been loaded.
9.
10.
11.
12.
Turn the machine off.
Remove USB Flash drive from the USB port on the machine.
Insert the USB Flash drive into the USB port on the computer.
Delete the first update file in the USB Flash drive by reformatting, and then,
copy the second update file (XV_V200_taco_Cmb_P.upf) to the USB Flash drive.
NOTE:
The USB Flash drive should contain the second update file only.
13. Safely remove the USB Flash drive from the USB port on the computer.
14. While pressing the "Automatic Threading" button, turn the main power to ON.
The following screen will appear on LCD.
15. Press the USB media key.
16. Insert the USB Flash drive into the primary (top) USB port on the machine. . (Wait several
seconds for machine to recognize USB)
Copyright  2004-2016 Baby Lock USA
Customer Support: 1-800-313-4110
BLDY Ver. 2.00 Software Update – p.9
17. Press the LOAD key.
18. When the message "Upgrade complete" appears, the update is completed.
19.
20.
21.
22.
Turn the machine off.
Remove the USB Flash drive from the USB port on the machine.
Turn the machine on.
Your machine's software has been updated to version 2.00.
When the update completed successfully, “Version” on the settings screen shows "2.00".
If “Version” on the settings screen shows “2.00#”, the first update file was not installed.
Install the first update file (xv_movie_file_taco_N.upf) into the machine.
Copyright  2004-2016 Baby Lock USA
Customer Support: 1-800-313-4110
BLDY Ver. 2.00 Software Update – p.10
Baby Lock Destiny (Model BLDY) Update History
 Version 1.22 update provided the following changes.
1. Enhanced the functionality of displaying the thumbnails in the embroidery pattern
selection screen when recalling a pattern from USB media/device, computer or SD card.
(except recalling a pattern from the embroidery card)
2. Added ability to scroll thumbnail image screen for selecting an embroidery pattern.
3. Enhanced the texture of hand-look quilting stitch.
4. Improved machine's functionality for the following features or some issues.
 Increased speed of reading of data from USB device/media
 Conversion function to create running stitches from the drawing line on IQ Designer
 Conversion function to create a closed object from the scanning image on IQ
Designer
 Version 1.20 update provided the following changes.
1. The following features have been added with the software version 1.20.
A) Recalling or Saving Embroidery Data on SD Cards.
Recommended SD card size: 48GB or less.
B) Expanded Spool Stand LED Indicators
 To learn new features, read the instructions for Version 1.20.
Instruction PDF for the additional feature of Version 1.20
(File size: 614KB)
2. Improved compatibility of importing an image file with JPEG format to the machine.
3. Improved the following function of IQ Designer.
 Not only all drawing designs but also the scanned images will be cleared in the
screen when pressing [All Clear] key.
4. Improved machine's functionality for the following features or some issues.
 Selecting or editing stitch patterns in the Utility Stitch Screen
 Editing the pattern in the Embroidery Edit mode
 USB connection with the computer
 IQ Designer
 Capability for recalling particular PES data that contains incompatible format
 Some issues of using the camera function
 Minor issue of foot controller recognition
 Version 1.13 update provided the following changes.
1. Added 30 additional tutorial videos.
Copyright  2004-2016 Baby Lock USA
Customer Support: 1-800-313-4110
BLDY Ver. 2.00 Software Update – p.11
2. Improved functionality of the following features:
 IQ Designer
 Camera
 Version 1.12 update provided the following changes.
1. Fixed some issues which may have occurred when the machine starts up.
2. Fixed some issues with the machine regarding the following features.
 Pivot function
 Camera function
 IQ Designer
 Version 1.11 update provided the following changes.
1. Fixed some issues which may have occurred when the machine starts up.
2. Fixed some issues with the machine regarding the following features.
 Scanning fabric to be used as a background with the Super Large Embroidery Frame
(9.5” x 14”)
 Connecting the rotated patterns using the camera function
 IQ Designer
 Reading the pattern data from USB DVD/CD drive
 Version 1.10 update provided the following changes.
1. The USB mouse (optional accessory) is available.
2. The Embroidery card reader (optional accessory) is available.
3. Connecting a computer to the machine using a USB cable will be supported to update the
machine's software after updating to version 1.10. (Windows OS only)
Copyright  2004-2016 Baby Lock USA
Customer Support: 1-800-313-4110
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising