Time switches and twilight switches selection chart

Time switches and twilight switches selection chart
2009_SEA_D01-40a.qxd
2/20/09
7:37 PM
Page 78
Time switches and twilight switches selection chart
Analogue time switches
(din rail mounted) :
Width in 1 :
EH 010, EH 011
Analogue time switches
(72 x 72mm) :
Width in 2 :
EH 209, EH210, EH 211, EH271
Width in 3 :
EH 110, EH 111, EH 171
Width in 5 :
EH 191
Analogue time switches (din rail mounted)
Technical
characteristics EH010
Width in
17.5mm
Analogue time switches (72 x 72mm)
EH011 EH209 EH210 EH211 EH271 EH110 EH111
1
1
Voltage
supply
230V AC
230V AC
Operating
cycle
24 hrs.
24 hrs. 24 hrs.
24 hrs.
24 hrs.
7 days
24 hrs.
Minimum
switching
15 min
15 min 30 min
30 min
30 min
3 hrs.
30 min
15 min
Supply failure
reserve
Manual
override
2
2
2
2
3
200 hrs.
-
-
200 hrs. 200 hrs.
auto/
on
auto/
on
auto/
on/off
auto/
on/off
auto/
on/off
auto/
on/off
-
EH171 EH191 EH710 EH711 EH770 EH771
3
110/
110/
230V AC 230V AC
110/
230V AC
230V AC 230V AC
230V AC
-
EH 710, EH 711, EH 770, EH 771,
EH 712, EH 715, EH 716
3
5
-
-
-
-
EH715 EH716
-
-
-
230V AC 230V AC 230V AC
230V AC 230V AC 230V AC
230V AC
24 hrs.
7 days 24 hrs./ 24 hrs.
7 days
24 hrs.
7 days
7 days
24 hrs.
24 hrs.
24 hrs.
15 min
2 hrs.
20 min
2 hrs.
2 hrs.
20 min
20 min
20 min
-
200 hrs.
-
200 hrs.
-
-
200 hrs.
on/off
on/off
on/off
on/off
on/off
on/off
on/off
15 min/ 20 min
2 hrs.
200 hrs. 200 hrs. 200 hrs.
auto/
on/off
auto/
on/off
auto/
on/off
auto/
on/off
Twilight switches
(din rail mounted) :
Digital time switches
(din rail mounted) :
Width in 1 :
EG 010,
EG 071
EH712
Width in 3 :
EG 110, EG 170,
EG 171, EG 172,
EG 210, EG 270
Twilight switch
(surface mounted) :
EE 701
EE 170
Digital time switches (din rail mounted)
48V DC
110-240VAC
Twilight switches
Twilight
(din rail mounted)
switch
(surface
Technical
Characteristics
mounted)
EG010 EG071
EG110 EG170 EG172 EG210
EG270
EG293B EG403E EG493E EE100
EE101
EE110 EE170 EE171
EE002
EE003
EE701 EE702
3
3
5
3
3
-
-
-
7days
7days
-
-
-
-
Width in 17.5mm 1
1
3
3
3
3
3
4
4
Operating cycles
24hrs
7days
24hrs
7days
7days
24hrs
7days
Yearly
Weekly Yearly
-
-
24hrs
Program steps
5
20
20
20
20
20
20
300
300
300
-
-
15min 1min
1min
-
-
-
-
Voltage supply
230V
230V
230V
230V
12VAC 110/
230V
230V
Surf.
Flush
Surf.
Surf.
Surf.
Flush
Surf.
-
-
4
4
1
1
2
2
2
-
-
-
-
N° of channels
D.6
1
1
1
1
1
110/
230V
& DC
230V
230V
2
2
2
4
-
2009_SEA_D01-40a.qxd
2/20/09
7:37 PM
Page 79
Electromechanical time switches
Description
Electromechanical time
switches 1 channel for daily or
weekly programming.
To control lighting, heating,
household appliances, shop
windows etc...
To improve comfort and save
energy.
Applications
Domestic, commercial and
industrial premises.
DIN rail mounting
Technical data
- programming by captive
segments.
- manual override :
On 1 module devices :
- automatic
- permanent ON
On 2, 3 and 5 module devices :
- automatic
- permanent ON
- permanent OFF
Voltage supply :
110 / 230 VAC 50/60Hz for
EH111, EH 209, EH 210
230VAC 50/60Hz for others
Complies with EN60730
Designation
Characteristics
1 channel
Daily dial
without battery reserve
Output :
1N/O
16A - 250V AC1
Changeover
16A - 250V AC1
Minimum switching time:
- 15 min for daily versions (1 and
3 module)
- 2 hours for weekly versions
- 30 min for daily versions (2
module)
- 3 hours 30 mins for weekly
version (2 module)
- 15 min and 2 hours on the
daily+weekly version
Connection capacity :
1 to 4▫
For technical information
see pages T.39 - T.41
Width in I
17.5mm
Pack
qty.
Cat.
ref.
1
1
EH 010
3
1
EH 110
1
1
EH 011
1 channel
Daily dial
with battery reserve
Output :
1N/O
16A - 250V AC1
Reserve :
200 hours after being
connected for 120 hours
Changeover
16A - 250V AC1
3
1
EH 111
1 channel
Weekly dial
with battery reserve
Output :
1 changeover
16A - 250V AC1
3
1
EH 171
Output :
1 changeover
16A - 250V AC1
5
1
EH 191
2
1
EH 209
2
1
EH 210
2
1
EH 211
2
1
EH 271
EH 010
Reserve :
200 hours after being
connected for 120 hours
1 channel
Daily + weekly dial
with battery reserve
Automation
Reserve :
200 hours after being
connected for 120 hours
EH 111
1 channel
Daily cycle
without battery reserve
Output :
Changeover
16A - 250V AC1
Without clockhands
Changeover
16A - 250V AC1
EH 211
1 channel
Daily cycle
Reserve :
200 hours after being
connected for 120 hours
Output :
1 channel
Weekly cycle
Reserve :
200 hours after being
connected for 120 hours
Output :
Changeover
16A - 250V AC1
Changeover
16A - 250V AC1
D.7
2009_SEA_D01-40a.qxd
2/20/09
7:37 PM
Page 80
Analogue time switches 72 x 72 mm
Description
For daily or weekly
programming.
1 channel for the control of
lighting, heating, household
appliances, shop windows etc..
To improve comfort and save
energy.
Applications
Domestic, commercial and
industrial premises.
Technical data
- suitable for surface, flush or
din rail mounting
- programming by captive
segments
- manual override with automatic
return to programme
- operating reserve : 200 hours
after being connected for 120
hours
- output : voltage free
changeover contact 16A/250V
Daily version :
Programming in steps of
10 minutes.
Minimum time between
2 switching intervals : 20 min
Weekly version :
Programming in steps of one
hour.
- minimum time between
2 switching intervals : 2 hours
- switching accuracy : 10 min
Complies with EN60730
For technical information
see pages T.39 - T.41
EH 711
Designation
Characteristics
Pack
qty.
Cat.
ref.
1 channel daily cycle
Supply : 230V 50/60Hz
Without battery reserve
1
EH 710
With battery reserve
1
EH 711
Economy version
1
EH 712
Without battery reserve
1
EH 770
With battery reserve
1
EH 771
Without battery reserve
1
EH 715
With battery reserve
1
EH 716
1 channel weekly cycle
1 channel daily cycle
EH 771
D.8
Supply : 230V 50/60Hz
Supply : 110V to 240V 50/60Hz
48V DC
2009_SEA_D01-40a.qxd
2/20/09
7:37 PM
Page 81
In-wall time
Saving energy with changing your
simple switch to a walltimer
Daily version
A single program repeated
each day
Weekly version
A different program every
day for 1 week
• 15 min. programming
internal
• 2 hour programming
internal
• Changeover accuracy :
1 min 30 seconds
• Changeover accuracy :
10 minutes
2 - unloosable white
screws are delivered
to install the timer on
the wall
Automation
24 h
7 days
Can easily integrate
each environment,
thanks to its discreet front plate
D.9
2009_SEA_D01-40a.qxd
2/20/09
7:37 PM
Page 82
In-wall timer
- Easy to wire (work with 3 wires)
Designed for the time control of
immersion heating boilers, lighting, watering systems, etc... in
home and business applices
- EN 60-730 all models
- Power consumption less than
0.5 VA
Control an incandescent halogen
lamp up to 1000W, compensated or uncompensated
fluorescent lamp up to 400 W
(C = 44µF) and compact fluorescent lamp up to 10 x 20 W.
- User friendly
- Quartz accuracy
Operating temperature:
0 °C to + 50 °C
Technical data
Supply voltage:
120/230 V ± 10 % 50/60 Hz
Storage temperature:
-20 °C to + 60 °C
- Time setting by ergonomic
unloosable segments
- Blue zone behind segments is
masked in OFF state and
visible in ON state
- Manual control ON/OFF/AUTO
used as override switch
- Adapted UL type wall box
- Muliti-tension 110/230V 50/60Hz
Accuracy:
1 sec/ 24h
Contact rating:
16 A/ 230V AC1
Insulation class:
II
Daily version :
A single program repeated each
day
- 15 min. programming internal
- Changover accuracy:
1 min 30 seconds
Weekly version :
A different program everyday for
1 week
- 2 hour programming internal
- Changover accuracy:
10 minutes
Protection class:
IP30
Degree of pollution:
Standard
For technical information
see pages T.39 - T.41
Designation
Positiion
Contact
Pack
qty.
Cat.
ref.
24 hours, 3 terminals
Horizontal
16A SPST supplied
1
EH 810
7 days, 3 terminals
Horizontal
16A SPST supplied
1
EH 870
EH810
EH 870
D.10
2009_SEA_D01-40a.qxd
2/20/09
7:37 PM
Page 83
Digital time switches
Description
For the control of lighting, school
bells (EG 171), pumps, heating,
household appliances, shop
windows, etc...
To improve comfort and save
energy.
Applications :
domestic, schools, colleges,
commercial and industrial
premises
Technical data
1, 2 or 4 channel :
- programming in 1 minute
increments
- easy programming
- display and control of the
program
- possibility to override the
output (permanent or
temporary)
Operating reserve :
lithium battery total of three
years.
- output : changeover contacts
16A - 250V AC1
- sealable front cover
Connection capacity :
1 to 4▫
For technical information
see pages T.39 - T.41
Complies with EN60730
Designation
Characteristics
1 channel daily cycle
5 adjustable pre-recorded programs :
Width in I
17.5mm
Pack
qty.
Cat.
ref.
1
1
EG 010
Capacity :
- 20 program steps
- 230V 50/60Hz
3
1
EG 110
1 channel weekly cycle
Capacity :
- 20 program steps
- 230V 50/60Hz
1
1
EG 071
1 channel weekly cycle
Capacity :
- 20 program steps
- 12V AC/DC
1
EG 172
1 channel weekly cycle
Capacity :
- 20 program steps
- 230V 50/60Hz
3
1
EG 170
1 channel weekly cycle
Capacity :
- 20 program steps
- 110V 50/60Hz
3
1
EG 270
- 6 commutations per day
- 230V 50/60Hz
3
D.11
Automation
EG 071
2009_SEA_D01-40a.qxd
2/20/09
7:37 PM
Page 84
Compact and flexible…
The new Hager digital time switches have Display and buttons are
protected with a cover.
been developed and adapted to suit
today’s expectations of contractors and
those of his customers.
Many convenient functions...
• Automatic change of Summer / Winter
time,
• 56 programs steps,
• Programming per day or group of days,
• Easy manual programming or via
interface and PC programming
software EG003,
• Permanent override with the
programming key,
• Override : permanent / temporary,
• 5 years of operating reserve with
lithium battery,
• Bar graph for visualization of the daily
profile,
• Quick copy and saving of the program
with the EG005 key,
• Programmable without mains supply,
• Reduced width : 2 modules
... and complementary :
digital time switches EG103E, EG203E
and EG103V
• Programming of pulses from 1sec. to
30min.
• remote temporary overrides (only
EG103E),
• Holiday mode : ON or OFF overrides
between 2 dates
• Occupancy simulation,
• Back light display.
Programming key EG005
This key has 2 advantages :
- copy and saving of the programs,
- permanent overrides.
When the programming key is inserted in
the time switch the key’s program will run
without changing the one which has been
set in the time switch originally. As soon
as the key is removed the time switch’s
program will start again.
Back light display for an easier
use (EG103E, EG203E).
Bar graph for visualization of the
daily profile.
Reduced number of
programming and navigation
buttons.
Direct programming key or via
an interface EG003 with his
programming software on PC.
Hager digital time switches
1 and 2 channels, width 2
EG103E
1 channel digital time switch weekly cycle, evolution
EG103V
1 channel digital time switch weekly cycle
EG203E
2 channels digital time switch weekly cycle, evolution
Width Pack
in qty
2
2
1
1
2
1
Accessories :
EG003U USB Interface and PC programming software
EG004
1
Locking jey for time switches 1 and 2 channels
EG005
Programmig key for time switches 1 and 2 channels
EG006
Storage module for 3 programming keys EG004/EG005
1
1
1
1
4
1
4 channels, width 4 Locking key EG004
It locks the keyboard in order to avoid any
EG493E
non desirable handling.
4 channels yearly time switch, 102 program steps
Accessories :
programming key for EG400
EG002
D.12
EG003U
USB Interface and PC programming software
L147
storage module for 1 key EG002
1
1
1
10
2009_SEA_D01-40a.qxd
2/20/09
7:37 PM
Page 85
... and with a software for a quick and
easy programming
The new 1 and 2 channels digital time
switches, as well as the yearly EG493E
programmers, can also be
programmed via the interface or via the
PC programming software EG003.
1. Select the hager digital time
switch type
A clear display
All the screen is available to display the
information in coloured graphics. The
programming is visualised at a glance.
Flexibility of use
The program saving by project name
makes it easier to research and modify
the programs.
Software extract
2. Select type of commutation
(ON/OFF/Pulse) as well as times and
days of programming ...
nothing easier !
Program steps are
immediately visualised by
graphs.
Automation
Quick programming
A few clicks on your mouse
and you are quicker than
with manual programming !
Evolutionary
Your customer can use
different keys to adapt the
programs to his lifestyle.
Always well-informed
You can print a personalised file for
your customers. Thus all the project
and programming information can be
kept in the electrical distribution board.
In addition, the “evolution” range offers
to your customer new functionalities,
like programming of a holiday period or
occupancy simulation.
A double - click on a program step is
enough to modify quickly the
programming. The program can be saved
on PC and / or be transferred on the
EG005/EG002 key via the EG003
interface.
D.13
2009_SEA_D01-40a.qxd
2/20/09
7:37 PM
Page 86
Digital time switches
For use in homes or business
premises. These devices are
designed to manage the operation on loads, such as lighting,
heating, domestic appliances,
windows, etc...in order to improve comfort and save energy.
EG 103E and EG 203E
“advanced” version :
same basic functions as those of
EG 103B and EG 203B above,
plus additional features :
• holidays mode : ON or OFF
overrides set between two
dates
• presence simulation
• backlighted screen
• impulse programming
(1 sec to 30 min)
EG403E, EG293B, EG493E
• 300 program steps
• Programmable ON, OFF,
Impulse or Cyclic output
• Input for external override
• Hours run counter per output
on EG293B and EG493E
Connection capacity :
EG 071 : 0,5 to 4,
EG 103E and EG 203E :
1 to 6 flex-wire,
1,5 to 10 rigid wire,
Quick connect terminals
(EG403E, EG293B, EG493E)
0.75 to 2.5º
Power suppy :
230 V 50/60 Hz
For technical information
see pages T.42
Pack
qty.
Cat.
ref.
2
1
EG 103E
Output : 1 reverse contact
16 A - 250 V AC 1
• supplied with 1 blank key EG 005
2
1
EG 203E
Interface and software
• for PC via USB link
• with software on CD
-
1
EG 003U
locking key
(yellow colour)
• prevents inadvertent use of EG
clocks (except EG 071 and EG 400)
-
1
EG 004
Blank programming key
(grey colour)
• for switch clocks EG 103B,
EG 203B, EG 103E, EG 203E
-
1
EG 005
• for programmer EG 400
-
1
EG 002
Storage module
• for 3 keys EG 005 or EG 004
1
1
EG 006
4-channel annual cycle
Outputs:
2 changeover volt-free contacts + 2NO
10A 250V~ AC1
• supplied with 1 programming key
EG007
4
1
EG 493E
2 channel annual cycle
Outputs:
2 changeover volt-free contacts
10A 250V~ AC1
4
1
EG 293B
4 channel weekly cycle
Outputs:
2 changeover volt-free contacts + 2NO
10A 250V~ AC1
• supplied with 1 programming key
EG007
4
1
EG 403E
Designation
Characteristics
Electronic switch clock
1 channel over 7 days
“advanced” evolution
Output : 1 reverse contact
16 A - 250 V AC 1
• supplied with 1 blank key EG 005
Electronic switch clock
1 channel over 7 days
“advanced” evolution
Width in I
17.5mm
EG 004
EG 203E
EG 005
EG 493E
EG 007
EG 293B
EG 403E
D.14
2009_SEA_D01-40a.qxd
2/20/09
7:37 PM
Page 87
Time lag switches
These devices are designad to
save energy and ensure safety.
For example : for building staircase or cellar lighting,
ventilation, pumping, etc...
For impulse control of lamps circuit with automatic opening after
preset time period.
The device includes a 2-position
override switch for permanent or
time-switched lighting.
Automatic recognition of connection type (3 or 4 wires).
Time delay is set by means of a
potentiometer located on the
front face.
Features :
- long service life
- quiet operation
- high quiescent current for
control by lighted pushbutton
(100mA)
(see technical characteristics)
Conform to standards :
NFC 61-113
IEC 60-669
EN 55014
For technical information
see pages T.45
Designation
Type
Characteristics
Width in I
17.5mm
Double time delay time-switch
1 NO
Power supply voltage :
230 V 50/60 Hz
1
6
EMN 001
1
6
EMN 003
1
1
EPS 450
30 sec. to 10 min.
adjustable
with recycling possible
Double time delay time-switch
EMN 003
Pack
qty.
Cat.
ref.
16 A - 250 V AC1
2300 W incandescent
1 NO
Short press
30 sec. to 10 min.
adjustable
with recycling possible
Power supply voltage :
230 V 50/60 Hz
16 A - 250 V AC1
2300 W incandescent
Long press (> 3 s)
fixed 1 hour
with interruption possible
Remote-controlled
time-switch
Serves as an interruptible
time-switch
Adjustable : 5 min. to 1 h with
adjustment possible
permanent latching-relay
1 NO
Power supply voltage :
230 V 50 / 60 Hz
or 8 to 24 V AC / DC
16 A - 250 V AC1
1000 W incandescent
Indicator light of status
display
Automation
EPS 450
D.15
2009_SEA_D01-40a.qxd
2/20/09
7:37 PM
Page 88
Delay timers
58
45
44
Description
To provide all types of
automatic control i.e. lighting,
ventilation, watering, machine
pre-heating, automatic door and
visual audible indication, cycle
control etc.
Technical data
Voltage range :
12 & 24 to 48V DC
12 & 24 to 230V AC
Adjustable: time delay from 0.1s
to 10hrs.
Led indicator
Applications
For timing and automation in
domestic and commercial
premises. The input signal can
be via various switching devices
(pushbutton, latching switch,
timeclock etc.) and the timed
output used to control the
application.
Complies with EN 60669-2-1
Designation
Characteristics
Width in I
17.5mm
Pack
qty.
Cat.
ref.
Delay on
1 c/o contact
10A / 230V~ AC
Time delay T : 0.1s to 10hr
1
1
EZN 001
1 c/o contact
10A / 230V~ AC
Time delay T : 0.1s to 10hr
1
1
EZN 002
1 c/o contact
10A / 230V~ AC
time delay T : 0.1s to 10hr
1
1
EZN 003
1 c/o contact
10A / 230V~ AC
time delay T : 0.1s to 10hr
1
1
EZN 004
1 c/o contact
10A / 230V~ AC
time delay T : 0.1s to 10hr
1
1
EZN 005
1 c/o contact
10A / 230V~ AC
time delay T : 0.1s to 10hr
1
1
EZN 006
Cd
Connection capacity :
6▫ max rigid
1.5 - 10▫ flexible
For technical information
see pages T.43-44
S
T
Delay off
Cd
EZN 001
S
T
Adjustable time on
Cde
S
T
Timer
Cd
EZN 003
S
T
Symetrical flasher
Cd
S
T
EZN 006
D.16
Multifunction
6 individual functions
including :
delay on
delay off
timer
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising