ZTE BLADE V7 Quick Start Guide

ZTE BLADE V7 Quick Start Guide
LEGAL INFORMATION
Getting to Know Your Phone
Copyright © 2016 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced, translated
or used in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without the prior written
permission of ZTE Corporation.
Indicator light
ZTE BLADE V7
Quick Start Guide
Disclaimer
ZTE Corporation expressly disclaims any liability for faults and
damages caused by unauthorized modifications of the software.
Images and screenshots used in this guide may differ from the actual
product. Content in this guide may differ from the actual product or
software.
Earpiece
To avoid damage to the phone, do not use any other
kind of SIM cards, or any non-standard nano-SIM card
cut from a SIM card. You can get a standard nano-SIM
card card from your service provider.
Touch screen
nano-SIM card slot 1
microSDHC card
slot
Home key
Back key
Your phone’s battery should have enough power for
the phone to turn on, find a signal, and make a few
calls. You should fully charge the battery as soon as
possible.
WARNING!
Use only ZTE-approved chargers and cables. The use
of unapproved accessories could damage your phone
or cause the battery to explode.
CAUTION:
Do not change the built-in rechargeable battery in your
phone by yourself. The battery can only be changed by
ZTE or ZTE authorised service provider.
Product Safety Information
Don’t make or receive phone calls while driving.
Never text while driving.
Keep your phone at least 15 mm away from your ear
or body while making calls.
Small parts may cause choking.
Your phone can produce a loud sound.
To prevent possible hearing damage, do not listen at
high volume levels for long periods.
Avoid contact with anything magnetic.
Recent apps key
nano-SIM card slot 1
Headset jack
nano-SIM /
microSDHC card slot
Turn off when asked to in hospitals and medical
facilities.
nano-SIM card slot 2
Back camera
Turn off when told to on aircraft and at airport.
Flash
Volume key
Turn off when near explosive materials or liquids.
Power key
NOTE:
microSDHC Logo is a trademark of SD-3C, LLC.
Other trademarks and trade names are the property of
their respective owners.
•
•
Version No.: R1.0
Edition Time : September 20, 2016
079584508336
Charging the Phone
Keep away from pacemakers and other electronic
medical devices.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE Corporation.
Google and Android are trademarks of Google, Inc.
The Bluetooth® trademark and logos are owned by the Bluetooth
SIG, Inc. and any use of such trademarks by ZTE Corporation is
under license.
WARNING!
Front camera
Notice
ZTE Corporation reserves the right to make modifications on print
errors or update specifications in this guide without prior notice.
We offer self-service for our smart terminal device users. Please visit
the ZTE official website (at www.ztedevice.com) for more information
on self-service and supported product models. Information on the
website takes precedence.
Visit http://www.ztedevice.com to download the user manual. Just
click Support from the home page and then select your location,
product type, and name to search for related support information.
Installing the nano-SIM Card(s) and
the microSDHC™ Card
Charging/
micro-USB jack
Slot 1 only supports nano-SIM card. Slot 2
supports nano-SIM card or microSDHC card.
The two nano-SIM slots support 4G/3G/2G
networks. When one nano-SIM card is set to
connect with 4G/3G networks, the other installed
nano-SIM card can only connect with 2G
networks.
NOTE:
If the screen freezes or takes too long to respond,
try pressing and holding the Power key for about 10
seconds to restart the phone.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In
this case, try again after charging the phone for at least
20 minutes. Contact the customer service if you still
cannot power on the phone after prolonged charging.
Don’t use at gas stations.
Your phone may produce a bright or flashing light.
Don’t dispose of your phone in fire.
Avoid extreme temperatures.
Avoid contact with liquids. Keep your phone dry.
Do not attempt to disassemble your phone.
Only use approved accessories.
Don’t rely on your phone as a primary device for
emergency communications.
Specific Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver.
It is designed not to exceed the limits for exposure to
radio waves recommended by international guidelines.
These guidelines were developed by the independent
scientific organization ICNIRP and include safety
margins designed to assure the protection of all
persons, regardless of age and health.
The guidelines use a unit of measurement known as
Specific Absorption Rate, or SAR. The SAR limit for
mobile devices is 2 W/kg and the highest SAR value
for this device when tested at the head was 0.343 W/
kg and when tested at the body was 0.999 W/kg.
As SAR is measured utilizing the device’s highest
transmitting power, the actual SAR of this device while
operating is typically below that indicated above. This
is due to automatic changes to the power level of
the device to ensure it only uses the minimum power
required to communicate with the network.
Declaration of RoHS
Compliance
To minimize the environmental impacts and take
more responsibilities to the earth we live on, this
document shall serve as a formal declaration that ZTE
BLADE V7 manufactured by ZTE CORPORATION
is in compliance with the Directive 2011/65/EU of the
European Parliament - RoHS (Restriction of Hazardous
Substances) with respect to the following substances:
1. Lead (Pb)
2. Mercury (Hg)
3. Cadmium (Cd)
4. Hexavalent Chromium (Cr (VI))
5. Polybrominated biphenyls (PBBs)
6. Polybrominated diphenyl ethers (PBDEs)
ZTE BLADE V7 manufactured by ZTE CORPORATION
meets the requirements of EU 2011/65/EU.
Disposal of Your Old Appliance
1.
2.
3.
When this crossed-out wheeled bin symbol is
attached to a product, it means the product is
covered by the European Directive 2012/19/
EU.
All electrical and electronic products should
be disposed of separately from the municipal
waste stream via designated collection
facilities appointed by the government or the
local authorities.
The correct disposal of your old appliance will
help prevent potential negative consequences
for the environment and human health.
For this product’s recycling information based on
WEEE directive, please send an e-mail to weee@zte.
com.cn
EC DECLARATION OF
CONFORMITY
Requirement Standard
Health and
safety
It is hereby declared that following designated product:
Product Type: LTE/WCDMA/GSM(GPRS) Multi
-Mode Digital Mobile Phone
Model No: ZTE BLADE V7
Product Description: LTE/WCDMA/GSM(GPRS)
Multi -Mode Digital Mobile Phone
Complies with the essential protection requirements of
Directives on Radio and Telecommunication Terminal
Equipment (Directive 1999/5/EC) ,Restriction of the
Certain Hazardous Substances in electrical and
electronic equipment (Directive 2011/65/EU), Ecodesign Requirements for Energy-Related Products
(Directive 2009/125/EC) and their amendments.
This declaration applies to all specimens manufactured
identical to the samples submitted for testing/
evaluation.
The assessments were based on the following
regulations and standards:
EMC
Assessment
Body
PHOENIX
EN 609501:2006+A11:2009
+A1:2010+A12:2011+A2:2013 TESTLAB
EN 50332-1:2013;
EN50332-2:2013
EN 50566:2013/AC:2014;
EN50360:2001+A1:2012
EN 62209-1:2006;
EN62209-2:2010;
EN62479: 2010
EN 301 489-1 V1.9.2;
EN 301 489-3 V1.6.1;
EN 301 489-17 V2.2.1;
EN 301 489-7 V1.3.1
EN 301 489-24 V1.5.1;
IEC 62321:2008+2013+2015
ErP
(EC) No 278/2009
ZTE Plaza, #55 Keji Road South, Hi-Tech,
Industrial Park,
Nanshan District,Shenzhen, Guangdong, 518057,
P.R.China
Authorised person signing for the company:
Yao Cuifeng
ZTE Corporation
Chief Quality Officer of
Name in block letters & position in the company
Shenzhen, 30th Aug 2016
Place & date
Radio Spectrum EN 301 908-1 V7.1.1;
EN 301 908-2 V6.2.1;
EN 301 908-13 V6.2.1;
EN 301511 V9.0.2
EN 300 328 V1.8.1;
EN300 440-1 V1.6.1
EN 300 440-2 V1.4.1
RoHS
This declaration is the responsibility of the
manufacturer:
ZTE Corporation
Intertek Testing
Services
Ltd.,Shanghai
SGS-CSTC
Safety Lab
Shenzhen Zoom
Rel Testing
Technology
Co.,Ltd
Legally valid signature
This equipment may be operated
in:
CY
CZ
DK
EE
DE
GR
HU
IE
LT
LU
MT
NL
SK
SI
ES
SE
LI
NO
CH
BG
AT
BE
FI
IT
PL
GB
RO
FR
LV
PT
IS
TR
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising