How to use AMD RAIDXpert to enable NCQ function 如何使用

How to use AMD RAIDXpert to enable NCQ function 如何使用
How to use AMD RAIDXpert to enable NCQ function
如何使用 AMD RAIDXpert 開啟 NCQ 功能
1. Please enter BIOS Setup->Integrated Peripherals->On-Chip ATA Devices->Set RAID
Mode as AHCI->Click F10 to Save & Exit. (Photo1)
進入 BIOS Setup->Integrated Peripherals->On-Chip ATA Devices->設定 RAID Mode 作為
AHCI 模式->按 F10 Save & Exit。
(Photo1)
2. Click F6 when the message "Press F6 if you need to install third party SCSI or RAID
driver" appears during OS installation and install AHCI driver. (Photo2 & Photo3)
安裝作業系統過程中請按 F6 安裝 AHCI 驅動程式。
(Photo2)
(Photo3)
3. After installing OS and driver successfully, the Device Manager will show “AMD AHCI
Compatible RAID Controller” and “AMD RAID Console”. (Photo4)
安裝作業系統和驅動程式成功後,裝置管理員將會顯示“AMD AHCI Compatible RAID
Controller”和“AMD RAID Console”。
(Photo4)
4. Download and install AMD RAIDXpert driver from AMD website below.
下載和安裝如下 AMD 網站提供 RAIDXpert driver。
(http://www.amd.com/us-en/0,,3715_15337,00.html)
5. Execute RAIDXpert and type admin for Login ID and Password. (Photo5)
執行 RAIDXpert 然後 Login ID 和 Password 請輸入 admin。
(Photo5)
6. Main menu for RAIDXpert. (Photo6)
RAIDXpert 主頁。
(Photo6)
7. Finally, choose SATA HDD under “Physical Drive View” and enable NCQ function.
(Photo7)
最後,在“Physical Drive View”選擇安裝 SATA HDD 然後開啟 NCQ 功能。
(Photo7)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising