NovAtel Inc. Model List

NovAtel Inc. Model List
NovAtel Inc. Model List
Phone: 1-800-NOVATEL
403-295-4500
Fax:
403-295-4901
Web:
www.novatel.com
Email:
sales@novatel.com
Mail:
NovAtel Inc.
1120 – 68th Avenue NE
Calgary, AB
Canada T2E 8S5
All prices shown are in U.S. dollars and F.C.A. NovAtel Calgary. Prices outside of North America may vary due to
importation tariffs and costs.
All prices, product descriptions, specifications, and models are subject to change without notice. A complete
summary of NovAtel’s Standard Terms and Conditions is available upon request.
NovAtel®, GPSolution®, RT-2®, RT-20®, ProPak®, FlexPak® and MEDLL® are registered trademarks of NovAtel
Inc. OEMVTM, Vision CorrelatorTM, OEM4-G2TM, OEM4-G2LTM, PACTM, DL-4plusTM, GPSCardTM, SPANTM,
SUPERSTAR IITM, ConvertTM, and DL4ToolTM are trademarks of NovAtel Inc. All other brand names are trademarks
of their respective owners.
Revision 23
D04492 PL
ROHS INFORMATION
NovAtel's OEMV products listed in this price list are compliant with the European Economic Union’s
Restriction of Hazardous Substances (RoHS) directive. The aim of this directive is to reduce the
hazardous materials content in electronic products. Specifically, it bans electronic equipment from being
sold in Europe after July 1, 2006 if it contains more than trace levels of lead, hexavalent chromium,
cadmium, mercury or certain brominated flame-retardants.
NovAtel is in the process of converting other select products to meet the RoHS directive; however, not
all existing products will be converted. Please visit our website for more information on RoHS status for
all NovAtel products. (http://www.novatel.com/support/weee.htm)
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
OEMV RECEIVERS
The OEMV family receivers are available in single, dual, or triple-frequency models and feature our
patented PACTM and Vision CorrelatorTMtechnologies 1 . Included with each receiver are NovAtel’s
Windows®-based software utilities, GPSolution® and ConvertTM, and product manuals. Upgrades to
more feature-intensive models are available via telephone, fax, or e-mail.
OEMV-1 GPS RECEIVER OEM CARD
The OEMV-1TM is a 16-channel, single-frequency receiver in a 46 mm x 71 mm form-factor with low power consumption. All
OEMV-1 cards offer position, velocity and time (PVT) output up to 20Hz, real-time DGPS positioning (including SBAS,
OmniSTAR, and CDGPS), support for RTCA and RTCM messages and three serial, one CAN bus port and a USB serial
interface. The OEMV-1 is configurable as a rover or base station and is designed for embedded applications.
The OEMV-1 will be available in a Smart Antenna and FlexPak enclosure later in 2006.
All models are available with the API (Application Program Interface) option. Add “-A” to the part number for each receiver
requiring API capabilities.
Single-Frequency, 16-channel, L1 C/A code
OEMV-1-RT20 ................. 20 cm real-time kinematic positioning, outputs RT-20® corrections and raw data,
real-time DGPS, OmniSTAR VBS 2 , CDGPS 3 , and SBAS 4 , 20Hz
OEMV-1-L1-VBS ............. Outputs RT-20® corrections and raw data, real-time DGPS, OmniSTAR VBS2, CDGPS3, and SBAS4, 20Hz
OEMV-1-VBS .................. Real-time DGPS, OmniSTAR VBS2, CDGPS3, and SBAS4, 20Hz
4
OEMV-1-L1...................... Outputs RT-20® corrections and raw data, real-time DGPS, SBAS , 20Hz
1
All OEMV products are currently available with PAC Technology only. Vision Correlator Technology will be available in a future
firmware release.
2
A subscription is required to OmniSTAR HP/XP/VBS service, which may not be available in all areas.
3
CDGPS Corrections may not be available in all areas.
4
SBAS Corrections including WAAS, MSAS and EGNOS may not be available in all areas.
1-800-NOVATEL
All prices shown in USD
www.novatel.com
OEMV-2 GPS + GLONASS RECEIVER OEM CARD
The OEMV-2TM is a parallel 72-channel, dual-frequency or 36-channel, single-frequency receiver featuring a 60 mm x 100
mm form-factor and low power consumption. All OEMV-2 cards feature GPS-only position, velocity and time (PVT) output,
real-time DGPS and SBAS positioning, support for RTCA and RTCM messages, GPS and GLONASS raw data output, two
serial ports, CAN bus and a USB interface. The OEMV-2 is configurable as a rover or base station and is designed for
embedded applications.
The OEMV-2 card will be available in a FlexPak enclosure later in 2006.
All models can be enabled to provide GLONASS raw measurement output. Add “-G” to the part number for each receiver
requiring GLONASS capabilities. All OEMV-2 cards will be firmware upgradeable to full GPS+GLONASS code and RTK
positioning in the future.
All models are available with the API (Application Program Interface) option. Add “-A” to the part number for each receiver
requiring API capabilities.
Dual-Frequency, 72-Channel, GPS L1 C/A code, L2 P(Y) code, GPS L2C code
OEMV-2-RT2................... 2 cm real-time kinematic positioning, outputs RT-2® corrections
and raw data, real-time DGPS, SBAS 5 , 20Hz
5
OEMV-2-L1L2.................. Outputs RT-2® corrections and raw data, real-time DGPS, SBAS , 20Hz
Single-Frequency, 36-Channel, GPS L1 C/A code (Fully Upgradeable to Dual-Frequency)
OEMV-2-RT20 ................. 20 cm real-time kinematic positioning, outputs RT-20® corrections
and raw data, real-time DGPS, SBAS5, 20Hz
OEMV-2-L1...................... Outputs RT-20® corrections and raw data, real-time DGPS, SBAS5, 20Hz
5
SBAS Corrections including WAAS, MSAS and EGNOS may not be available in all areas.
1-800-NOVATEL
All prices shown in USD
www.novatel.com
OEMV-3 GPS + GLONASS RECEIVER OEM CARD
The OEMV-3TM is a parallel 72-channel, dual-frequency or 36-channel, single-frequency receiver featuring an 85 mm x 125
mm form-factor and low power consumption. All OEMV-3 cards feature GPS-only position, velocity and time (PVT) output,
real-time DGPS positioning (including SBAS, OmniSTAR and CDGPS), support for RTCA and RTCM messages, GPS and
GLONASS raw data output, three serial ports, 2 CAN bus ports and a USB interface. The OEMV-3 is configurable as a
rover or base station and is designed for embedded applications.
The OEMV-3 is also available in a ProPak enclosure.
All models except HP and VBS can be enabled to provide GLONASS raw measurement output. Add “-G” to the part
number for each receiver requiring GLONASS capabilities 6 . All OEMV-3 cards will be firmware upgradeable to full
GPS+GLONASS code and RTK positioning in the future.
All models are available with the API (Application Program Interface) option. Add “-A” to the part number for each receiver
requiring API capabilities.
All OEMV-3 cards will be firmware upgradeable to L5 positioning and 100Hz output in the future. Additional pricing may
apply.
Dual-Frequency, 72-Channel, GPS L1 C/A code, L2 P(Y) code, GPS L2C code
OEMV-3-RT2................... 2 cm real-time kinematic positioning, outputs RT-2® corrections and raw data,
real-time DGPS, OmniSTAR HP/XP/VBS 7 , CDGPS 8 , and SBAS 9 , 20Hz
OEMV-3-L1L2.................. Outputs RT-2® corrections and raw data, DGPS, OmniSTAR HP/XP/VBS7, CDGPS8, and SBAS9, 20Hz
OEMV-3-HP..................... Real-time DGPS, OmniSTAR HP/XP/VBS7, CDGPS8, and SBAS9, 20Hz
Single-Frequency, 36-Channel, GPS+GLONASS L1 C/A code (Fully Upgradeable to Dual-Frequency)
OEMV-3-RT20 ................. 20 cm real-time kinematic positioning, outputs RT-20® corrections and raw data,
real-time DGPS, OmniSTAR VBS7, CDGPS8, and SBAS9, 20Hz
OEMV-3-VBS .................. Real-time DGPS, OmniSTAR VBS7, CDGPS8, and SBAS9, 20Hz
OEMV-3-L1...................... Outputs RT-20® corrections and raw data, real-time DGPS, and SBAS9, 20Hz
6
OmniSTAR and CDGPS are not available once GLONASS is enabled.
A subscription is required to OmniSTAR HP/XP/VBS service, which may not be available in all areas.
8
CDGPS Corrections may not be available in all areas.
9
SBAS Corrections including WAAS, MSAS and EGNOS may not be available in all areas.
7
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
PROPAK-V3 GPS RECEIVER ENCLOSURE
The ProPak®-V3 is a durable, high-performance receiver with advanced capabilities, including GLONASS measurements,
integrated OmniSTAR and CDGPS and API support. Featuring NovAtel’s latest high performance GNSS engine, the
OEMV-3, it is available in an RS-232 configuration with three serial ports and USB 1.1 support. The ProPak-V3 also
features optional support for an external IMU. It includes an automotive power adapter, a null-modem cable, a straight
serial cable, a USB cable, an auxiliary I/O port cable, and a mounting kit. All ProPak-V3 receivers provide position output,
real-time DGPS positioning, support for RTCA and RTCM messages and are configurable as a rover or base station.
All models except HP and VBS can be enabled to provide GLONASS raw measurement output. Add “-G” to the part
number for each receiver requiring GLONASS capabilities 10 . All OEMV-3 cards will be firmware upgradeable to full
GPS+GLONASS code and RTK positioning in the future.
All models are available with the API (Application Program Interface) option. Add “-A” to the part number for each receiver
requiring API capabilities.
RS-232 VERSION
Dual-Frequency, 72-Channel, L1 C/A code, L2 P(Y) code, L2C
PROPAK-V3-RT2 ............ 2 cm real-time kinematic positioning, outputs RT-2® corrections and raw data,
11
12
13
L2 carrier phase, real-time DGPS, OmniSTAR HP/XP/VBS , CDGPS , and SBAS , 20Hz
11
PROPAK-V3-L1L2
Outputs RT-2® corrections and raw data, DGPS, OmniSTAR HP/XP/VBS , CDGPS12, and SBAS13, 20Hz
PROPAK-V3-HP .............. Real-time DGPS, OmniSTAR HP/XP/VBS11, CDGPS12, and SBAS13, 20Hz
Single-Frequency, 36-Channel, L1 C/A code (Fully Upgradeable to Dual-Frequency)
PROPAK-V3-RT20 .......... 20 cm real-time kinematic positioning, outputs RT-20® corrections and raw data,
real-time DGPS, OmniSTAR VBS11, CDGPS12, and SBAS13, 20Hz
PROPAK-V3-VBS............ Real-time DGPS, OmniSTAR VBS11, CDGPS12, and SBAS13, 20Hz
PROPAK-V3-L1 ............... Outputs RT-20® corrections and raw data, real-time DGPS, and SBAS13, 20Hz
RS-422 VERSION 14
Dual-Frequency, 72-Channel, L1 C/A code, L2 P(Y) code, L2C
PROPAK-V3-424-RT2 ..... 2 cm real-time kinematic positioning, outputs RT-2® corrections and raw data,
11
12
13
L2 carrier phase, real-time DGPS, OmniSTAR HP/XP/VBS , CDGPS , and SBAS , 20Hz
11
PROPAK-V3-424-L1L2.... Outputs RT-2® corrections and raw data, DGPS, OmniSTAR HP/XP/VBS , CDGPS12, and SBAS13, 20Hz
PROPAK-V3-424-HP....... Real-time DGPS, OmniSTAR HP/XP/VBS11, CDGPS12, and SBAS13, 20Hz
Single-Frequency, 36-Channel, L1 C/A code (Fully Upgradeable to Dual-Frequency)
PROPAK-V3-424-RT20 ... 20 cm real-time kinematic positioning, outputs RT-20® corrections and raw data,
real-time DGPS, OmniSTAR VBS11, CDGPS12, and SBAS13, 20Hz
11
12
13
PROPAK-V3-424-VBS..... Real-time DGPS, OmniSTAR VBS , CDGPS , and SBAS , 20Hz
13
PROPAK-V3-424-L1........ Outputs RT-20® corrections and raw data, real-time DGPS, and SBAS , 20Hz
APPLICATION PROGRAMMING INTERFACE (API) DEVELOPMENT KIT
The Application Programming Interface (API) development kit includes the API library, which provides the functions needed to
develop a C/C++ application to run on the OEMV or OEM4 family of receivers. Also included in the purchase price is ten hours
of technical support and upgrades to an API enabled model for five receivers. Use of an API application requires a receiver
enabled with API capabilities.
API-DEV-KIT ................... API development kit
10
OmniSTAR and CDGPS are not available once GLONASS is enabled.
A subscription is required to OmniSTAR HP/XP/VBS service, which may not be available in all areas.
12
CDGPS Corrections may not be available in all areas.
13
SBAS Corrections including WAAS, MSAS and EGNOS may not be available in all areas.
14
The RS-422 version provides COM1 and COM3 at RS-424 levels. COM2 remains at RS-232 levels.
11
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
OEM4 RECEIVERS
All OEM4 family receivers are available in dual-frequency or single-frequency models and feature our
patented PACTM technology. Included with each receiver are NovAtel’s Windows®-based software
utilities, GPSolution® and ConvertTM, and product manuals. Upgrades to more feature-intensive models
are available via telephone, fax, or e-mail.
OEM4-G2 GPS RECEIVER OEM CARD
The OEM4-G2TM is a parallel 24-channel, dual-frequency or 12-channel, single-frequency receiver featuring an 85 mm x 125
mm (passport size) form-factor and low power consumption. All OEM4-G2 cards offer position output, real-time DGPS
positioning, support for RTCA and RTCM messages, three serial ports, and a USB interface. The OEM4-G2 is configurable
as a rover or base station and is designed for embedded applications or as a stand-alone unit in a ProPak-G2 enclosure.
All models are available with the API (Application Program Interface) option. Add “-API” to the part number for each
receiver requiring API capabilities.
Dual-Frequency, 24-Channel, L1 C/A code, L2 P(Y) code
OEM4-G2-RT2W ............. 2 cm real-time kinematic positioning, accepts SBAS 15 corrections, real-time DGPS, raw data output
OEM4-G2-RT2................. 2 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
OEM4-G2-L1L2W ............ Outputs RT-2® corrections, accepts SBAS15 corrections, real-time DGPS, raw data output
OEM4-G2-L1L2 ............... Outputs RT-2® corrections, real-time DGPS positioning, raw data output
15
OEM4-G2-WAAS............. Real-time DGPS positioning, accepts WAAS corrections
15
OEM4-G2-MSAS ............. Real-time DGPS positioning, accepts MSAS corrections
OEM4-G2-EGNOS .......... Real-time DGPS positioning, accepts EGNOS15 corrections
Single-Frequency, 12-Channel, L1 C/A code (Fully Upgradeable to Dual-Frequency)
OEM4-G2-RT20W ........... 20 cm real-time kinematic positioning, accepts SBAS15 corrections, real-time DGPS, raw data out
OEM4-G2-RT20............... 20 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
15
OEM4-G2-3151W ............ Outputs RT-20® corrections, accepts SBAS corrections, real-time DGPS, raw data output
OEM4-G2-3151R............. Outputs RT-20® corrections, real-time DGPS positioning, raw data output
OEM4-G2-3111W ............ Accepts SBAS15 corrections, real-time DGPS positioning
OEM4-G2-3111R............. Real-time DGPS positioning
OEM4-G2L GPS RECEIVER OEM CARD
The OEM4-G2LTM is a parallel 24-channel, dual-frequency or 12-channel, single-frequency receiver featuring a 60 mm x 100
mm form-factor and low power consumption. All OEM4-G2L cards feature position output, real-time DGPS positioning,
support for RTCA and RTCM messages, two serial ports and a USB interface. The OEM4-G2L is configurable as a rover or
base station and is designed for embedded applications.
All models are available with the API (Application Program Interface) option. Add “-API” to the part number for each
receiver requiring API capabilities.
Dual-Frequency, 24-Channel, L1 C/A code, L2 P(Y) code
OEM4-G2L-RT2W ........... 2 cm real-time kinematic positioning, accepts SBAS15 corrections, real-time DGPS, raw data output
OEM4-G2L-RT2............... 2 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
15
OEM4-G2L-L1L2W .......... Outputs RT-2® corrections, accepts SBAS corrections, real-time DGPS, raw data output
OEM4-G2L-L1L2 ............. Outputs RT-2® corrections, real-time DGPS positioning, raw data output
15
OEM4-G2L-WAAS........... Real-time DGPS positioning, accepts WAAS corrections
15
OEM4-G2L-MSAS ........... Real-time DGPS positioning, accepts MSAS corrections
OEM4-G2L-EGNOS ........ Real-time DGPS positioning, accepts EGNOS15 corrections
Single-Frequency, 12-Channel, L1 C/A code (Fully Upgradeable to Dual-Frequency)
OEM4-G2L-RT20W ......... 20 cm real-time kinematic positioning, accepts SBAS15 corrections, real-time DGPS, raw data out
OEM4-G2L-RT20............. 20 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
OEM4-G2L-3151W .......... Outputs RT-20® corrections, accepts SBAS15 corrections, real-time DGPS, raw data output
OEM4-G2L-3151R........... Outputs RT-20® corrections, real-time DGPS positioning, raw data output
OEM4-G2L-3111W .......... Accepts SBAS15 corrections, real-time DGPS positioning
OEM4-G2L-3111R ........... Real-time DGPS positioning
15
SBAS Corrections including WAAS, MSAS and EGNOS may not be available in all areas.
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
PROPAK-G2plus GPS RECEIVER ENCLOSURE
The ProPak®-G2plus is a rugged, lightweight enclosure containing the OEM4-G2 receiver. It is available in RS-232 or
RS-422 configurations with three serial ports and USB support. The ProPak-G2plus also features optional support for an
external IMU. It includes an automotive power adapter, a null-modem cable, a straight serial cable, a USB cable, an
auxiliary I/O port cable, and a mounting kit. All ProPak-G2plus receivers provide position output, real-time DGPS
positioning, and support for RTCA and RTCM messages and are configurable as a rover or base station.
All models are also available with the API (Application Program Interface) option. Add “-A” to the part number for each
enclosure requiring API capabilities.
RS-232 VERSION
Dual-Frequency, 24-Channel, L1 C/A code, L2 P(Y) code
PROPAK-G2+DB9-RT2W ........... 2 cm RTK positioning, accepts SBAS 16 corrections, real-time DGPS, raw data output
PROPAK-G2+DB9-RT2............... 2 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
16
PROPAK-G2+DB9-L1L2W .......... Outputs RT-2® corrections, accepts SBAS corrections, real-time DGPS, raw data output
PROPAK-G2+DB9-L1L2.............. Outputs RT-2® corrections, real-time DGPS positioning, raw data output
PROPAK-G2+DB9-WAAS ........... Real-time DGPS positioning, accepts WAAS16 corrections
PROPAK-G2+DB9-MSAS ........... Real-time DGPS positioning, accepts MSAS16 corrections
16
PROPAK-G2+DB9-EGNOS......... Real-time DGPS positioning, accepts EGNOS corrections
Single-Frequency, 12-Channel, L1 C/A code (Fully Upgradeable to Dual-Frequency)
PROPAK-G2+DB9-RT20W ......... 20 cm RTK positioning, accepts SBAS corrections, real-time DGPS, raw data output
PROPAK-G2+DB9-RT20............. 20 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
16
PROPAK-G2+DB9-3151W .......... Outputs RT-20® corrections, accepts SBAS corrections, real-time DGPS, raw data output
PROPAK-G2+DB9-3151R ........... Outputs RT-20® corrections, real-time DGPS positioning, raw data output
PROPAK-G2+DB9-3111W .......... Accepts SBAS16 corrections, real-time DGPS positioning
PROPAK-G2+DB9-3111R ........... Real-time DGPS positioning
RS-422 VERSION 17
Dual-Frequency, 24-Channel, L1 C/A code, L2 P(Y) code
PROPAK-G2+DB9-424-RT2W .... 2 cm RTK positioning, accepts SBAS16 corrections, real-time DGPS, raw data output
PROPAK-G2+DB9-424-RT2........ 2 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
PROPAK-G2+DB9-424-L1L2W ... Outputs RT-2® corrections, accepts SBAS16 corrections, real-time DGPS, raw data output
PROPAK-G2+DB9-424-L1L2 ...... Outputs RT-2® corrections, real-time DGPS positioning, raw data output
16
PROPAK-G2+DB9-424-WAAS.... Real-time DGPS positioning, accepts WAAS corrections
16
PROPAK-G2+DB9-424-MSAS .... Real-time DGPS positioning, accepts MSAS corrections
PROPAK-G2+DB9-424-EGNOS . Real-time DGPS positioning, accepts EGNOS16 corrections
Single-Frequency, 12-Channel, L1 C/A code (Fully Upgradeable to Dual-Frequency)
PROPAK-G2+DB9-424-RT20W .. 20 cm RTK positioning, accepts SBAS16 corrections, real-time DGPS, raw data output
PROPAK-G2+DB9-424-RT20...... 20 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
16
PROPAK-G2+DB9-424-3151W ... Outputs RT-20® corrections, accepts SBAS corrections, real-time DGPS, raw data output
PROPAK-G2+DB9-424-3151R.... Outputs RT-20® corrections, real-time DGPS positioning, raw data output
PROPAK-G2+DB9-424-3111W ... Accepts SBAS16 corrections, real-time DGPS positioning
PROPAK-G2+DB9-424-3111R.... Real-time DGPS positioning
16
17
SBAS Corrections including WAAS, MSAS and EGNOS may not be available in all areas.
The RS-422 version provides COM1 and COM3 at RS-422 levels. COM2 remains at RS-232 levels.
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
DL-4plus GPS RECEIVER ENCLOSURE WITH DATA LOGGING CAPABILITIES
The DL-4plus is a rugged, lightweight enclosure containing the OEM4-G2 receiver and featuring integrated memory, an
LCD, and a keypad for data logging. It offers three serial ports, USB support, a configurable PPS output and mark input,
and a variable frequency output. Available in RS-232 or RS-422 configuration, the DL-4plus also features optional support
for an external IMU. Included with the enclosure are an automotive power adapter, a null-modem cable, a straight serial
cable, an auxiliary I/O port cable, a USB cable, DL4ToolTM software, and a mounting kit. All DL-4plus enclosures provide
position output, real-time DGPS positioning, and support for RTCA and RTCM messages and are configurable as a rover or
base station. All models are available with the API (Application Program Interface) option. Add “-A” to the part number for
each enclosure requiring API capabilities.
RS-232 VERSION
Dual-Frequency, 24-Channel, L1 C/A code, L2 P(Y) code
DL-4+RT2W..................... 2 cm real-time kinematic positioning, accepts SBAS 18 corrections, real-time DGPS, raw data out
DL-4+RT2 ........................ 2 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
18
DL-4+L1L2W ................... Outputs RT-2® corrections, accepts SBAS corrections, real-time DGPS, raw data output
DL-4+L1L2....................... Outputs RT-2® corrections, real-time DGPS positioning, raw data output
DL-4+WAAS .................... Real-time DGPS positioning, accepts WAAS18 corrections
DL-4+MSAS..................... Real-time DGPS positioning, accepts MSAS18 corrections
DL-4+EGNOS.................. Real-time DGPS positioning, accepts EGNOS18 corrections
Single-Frequency, 12-Channel, L1 C/A code (Fully Upgradeable to Dual-Frequency)
DL-4+RT20W................... 20 cm real-time kinematic positioning, accepts SBAS18 corrections, real-time DGPS, raw data out
DL-4+RT20 ...................... 20 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
18
DL-4+3151W ................... Outputs RT-20® corrections, accepts SBAS corrections, real-time DGPS, raw data output
DL-4+3151R .................... Outputs RT-20® corrections, real-time DGPS positioning, raw data output
18
DL-4+3111W ................... Accepts SBAS corrections, real-time DGPS positioning
DL-4+3111R .................... Real-time DGPS positioning
RS-422 VERSION 19
Dual-Frequency, 24-Channel, L1 C/A code, L2 P(Y) code
DL-4+424-RT2W ............. 2 cm real-time kinematic positioning, accepts SBAS18 corrections, real-time DGPS, raw data out
DL-4+424-RT2................. 2 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
18
DL-4+424-L1L2W ............ Outputs RT-2® corrections, accepts SBAS corrections, real-time DGPS, raw data output
DL-4+424-L1L2................ Outputs RT-2® corrections, real-time DGPS positioning, raw data output
18
DL-4+424-WAAS ............. Real-time DGPS positioning, accepts WAAS corrections
18
DL-4+424-MSAS ............. Real-time DGPS positioning, accepts MSAS corrections
DL-4+424-EGNOS........... Real-time DGPS positioning, accepts EGNOS18 corrections
Single-Frequency, 12-Channel, L1 C/A code (Fully Upgradeable to Dual-Frequency)
DL-4+424-RT20W ........... 20 cm real-time kinematic positioning, accepts SBAS18 corrections, real-time DGPS, raw data out
DL-4+424-RT20............... 20 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
18
DL-4+424-3151W ............ Outputs RT-20® corrections, accepts SBAS corrections, real-time DGPS, raw data output
DL-4+424-3151R ............. Outputs RT-20® corrections, real-time DGPS positioning, raw data output
DL-4+424-3111W ............ Accepts SBAS18 corrections, real-time DGPS positioning
DL-4+424-3111R ............. Real-time DGPS positioning
18
19
SBAS Corrections including WAAS, MSAS and EGNOS may not be available in all areas.
The RS-422 version provides COM1 and COM3 at RS-422 levels. COM2 remains at RS-232 levels.
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
PROPAK-LBplus OmniSTAR- and CDGPS-ENABLED GPS RECEIVER ENCLOSURE
The ProPak®-LBplus is a rugged, lightweight enclosure containing the OEM4-G2 receiver and support for OmniSTAR
correction data (requires a subscription to the OmniSTAR service). It also provides support for the free CDGPS (Canadawide Differential GPS) correction service, which is available across most of North America. It offers three RS-232 serial
ports and a configurable PPS output and mark input. The ProPak-LBplus also features optional support for an external
IMU. Included with the enclosure are an automotive power adapter, three serial cables, and a mounting kit. All ProPakLBplus enclosures offer position output, real-time DGPS positioning, and support for RTCA and RTCM messages and are
configurable as a rover or base station. All models are available with the API (Application Program Interface) option. Add
“-A” to the part number for each receiver requiring API capabilities.
Dual-Frequency, 24-Channel, L1 C/A code, L2 P(Y) code, CDGPS, and OmniSTAR HP/XP
PROPAK-LB+HP-RT2 ..... 2 cm RTK, accepts OmniSTAR HP/XP 20 , CDGPS 21 , and SBAS 22 corrections, raw data
PROPAK-LB+HP-L1L2 .... Outputs RT-2® corrections, OmniSTAR HP/XP20, CDGPS21, and SBAS22 corrections, raw data output
20
21
22
PROPAK-LB+HP ............. Accepts OmniSTAR HP/XP , CDGPS , and SBAS corrections
P
Single-Frequency, 12-Channel, L1 C/A code, CDGPS, and OmniSTAR VBS (Fully Upgradeable to Dual-Frequency)
PROPAK-LB+VBS-RT20 . 20 cm RTK positioning, accepts OmniSTAR VBS20, CDGPS21, and SBAS22 corrections, raw data
PROPAK-LB+VBS-L1...... Outputs RT-20® corrections, OmniSTAR VBS20, CDGPS21, and SBAS22 corrections, raw data output
20
21
22
PROPAK-LB+VBS........... Accepts OmniSTAR VBS , CDGPS , and SBAS corrections
20
A subscription is required to OmniSTAR HP/XP/VBS service, which may not be available in all areas.
CDGPS Corrections may not be available in all areas.
22
SBAS Corrections including WAAS, MSAS and EGNOS may not be available in all areas.
21
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
FLEXPAK-G2L GPS RECEIVER ENCLOSURE
The FlexPakTM-G2L is a rugged, waterproof enclosure containing the OEM4-G2L engine. All FlexPak-G2L receivers offer
position output, real-time DGPS positioning, support for RTCA and RTCM messages, two serial ports, and a USB interface.
Included with the enclosure are an automotive power adapter, two serial cables, a USB cable, Windows®-based software
utilities, and manuals. All models are available with the API (Application Program Interface) option. Add “-A” to the part
number for each receiver requiring API capabilities.
Dual-Frequency, 24-Channel, L1 C/A code, L2 P(Y) code
FLEXPAK-G2L-RT2W ..... 2 cm real-time kinematic positioning, accepts SBAS 23 corrections, real-time DGPS, raw data output
FLEXPAK-G2L-RT2......... 2 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
23
FLEXPAK-G2L-L1L2W .... Outputs RT-2® corrections, accepts SBAS corrections, real-time DGPS, raw data output
FLEXPAK-G2L-L1L2 ....... Outputs RT-2® corrections, real-time DGPS positioning, raw data output
FLEXPAK-G2L-WAAS..... Real-time DGPS positioning, accepts WAAS23 corrections
FLEXPAK-G2L-MSAS ..... Real-time DGPS positioning, accepts MSAS23 corrections
FLEXPAK-G2L-EGNOS .. Real-time DGPS positioning, accepts EGNOS23 corrections
Single-Frequency, 12-Channel, L1 C/A code (Fully Upgradeable to Dual-Frequency)
FLEXPAK-G2L-RT20W ... 20 cm real-time kinematic positioning, accepts SBAS23 corrections, real-time DGPS, raw data out
FLEXPAK-G2L-RT20....... 20 cm real-time kinematic positioning, real-time DGPS positioning, raw data output
FLEXPAK-G2L-3151W .... Outputs RT-20® corrections, accepts SBAS23 corrections, real-time DGPS, raw data output
FLEXPAK-G2L-3151R..... Outputs RT-20® corrections, real-time DGPS positioning, raw data output
23
FLEXPAK-G2L-3111W .... Accepts SBAS corrections, real-time DGPS positioning
FLEXPAK-G2L-3111R..... Real-time DGPS positioning
23
SBAS Corrections including WAAS, MSAS and EGNOS may not be available in all areas.
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
ACCESSORIES FOR OEMV AND OEM4 RECEIVERS
ANTENNAS
RoHS Antennas
GPS-702L...............L1/L2 and L-band, kinematic, zero-offset antenna
GPS-702-GG ..........L1/L2 and GPS + GLONASS, kinematic, zero-offset antenna
GPS-701-GG ..........L1, GPS + GLONASS kinematic, zero-offset antenna
Other Dual-Frequency Antennas
GPS-702.................L1/L2, kinematic, zero-offset antenna
GPS-533.................L1/L2, geodetic antenna with choke ring and protective radome
GPS-532.................L1/L2, aircraft antenna
GPS-532-C .............L1/L2, aircraft-certified antenna with FAA airworthiness certificate
GPS-534.................L1/L2/L-band, aircraft antenna
Other Single-Frequency Antennas
GPS-701.................L1, kinematic, zero-offset antenna
GPS-521.................L1, automotive antenna
GPS-511.................L1, aircraft antenna
ANTENNA CABLES
GPS-C006 ..............5 meter RF cable with straight TNC male plug connectors (for GPS-xxx antennas)
GPS-C016 ..............15 meter RF cable with straight TNC male plug connectors (for GPS-xxx antennas)
GPS-C032 ..............30 meter, low-loss RF cable with straight TNC male plug connectors (for GPS-xxx antennas)
01016772................22.5 cm RF cable with right-angle MMCX male plug and straight TNC bulkhead jack connectors
POWER AND COMMUNICATION CABLES
ProPak-V3
01017663................Accessory Power Cable, 4-pin Lemo with automotive adapter, RoHS compliant
01017658................Null-modem cable with 2 female DB-9 connectors, RoHS compliant
01017659................Straight serial cable (extension) with male and female DB-9 connectors, RoHS compliant
01017660................I/O strobe port interface cable with DB-9 male connector and open wires, RoHS compliant
01017664................USB cable (Host Side) to DB-9 female connector, RoHS compliant
ProPak-G2plus
01017474................Accessory Power Cable, 4-pin Lemo with automotive adapter (included with ProPak- G2plus)
60323062................Null-modem cable with 2 female DB-9 connectors (included with ProPak- G2plus)
60723066................Straight serial cable with male and female DB-9 connectors (included with ProPak- G2plus)
60723065................I/O strobe port interface cable with DB-9 male connector and open wires (included with ProPak- G2plus)
01017408................USB cable (Host Side) to DB-9 female connector (included with ProPak- G2plus)
DL-4plus
01017474................Accessory Power Cable, 4-pin Lemo with automotive adapter (included with DL-4plus)
60323062................Null-modem cable with 2 female DB-9 connectors (included with DL-4plus)
60723066................Straight serial cable with male and female DB-9 connectors (included with DL-4plus)
60723065................I/O strobe port interface cable with DB-9 male connector and open wires (included with DL-4plus)
01017408................USB cable (Host Side) to DB-9 female connector (included with DL-4plus)
FlexPak-G2L
01017374................Accessory Power Cable, 4-pin Lemo with automotive adapter (included with FlexPak-G2L)
01017375................Null-modem cable with Deutsch and female DB-9 connectors (included with FlexPak-G2L)
01017518................Straight serial cable with Deutsch and male DB-9 connectors (included with FlexPak-G2L)
01017359................USB cable (Host Side) to female 13 pin Deutsch circular connector (included with FlexPak-G2L)
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
ProPak-LBplus
60723075................Accessory Power Cable, 4-pin Lemo with automotive adapter (included with ProPak-LBplus)
60723061................Serial cable with female DB-9 and 6-pin, female Switchcraft connectors (included with ProPak-LBplus)
60723062................Serial cable with female DB-9 and 7-pin, female Switchcraft connectors (included with ProPak-LBplus)
60723063................Serial cable with female DB-9 and 8-pin, female Switchcraft connectors (included with ProPak-LBplus)
OTHER
40023098................AC adapter with auto receptacle and IEC-320-C14 input inlet (removable IEC-320 to North American
plug included, requires addition of region-specific plug for use outside North America)
40023106................RoHS compliant AC adapter with auto receptacle and IEC-320-C14 input inlet (removable IEC-320 to North
American plug included, requires addition of region-specific plug for use outside North America)
010-0-0026 .............DL-4plus industrial temperature grade Compact Flash memory card (minimum 16 MB)
31324235................High capacity DL-4plus commercial temperature grade Compact Flash memory card (minimum 1 GB)
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
SUPERSTAR II L1 RECEIVERS
SUPERSTAR II GPS RECEIVER OEM CARD
The SUPERSTAR IITM is a 12-channel, L1-only receiver just 46 mm x 71 mm. It features low power consumption, standard
1 Hz PVT output, real-time DGPS positioning, and accepts SBAS corrections 24 . Available in 5 V and 3.3 V models, the
SUPERSTAR II is designed for embedded applications but is also available as part of a SMART ANTENNA
receiver/antenna combination or the FlexPak-SSII. A development kit is also offered, with the FlexPak-SSII enclosure, a
magnetic mount antenna with integrated RF cable, an interface cable, and an AC adapter.
SUPERSTAR II OEM Card
SSII-3-BASE................................ 3.3 V, DGPS base station operation, 1 Hz CP output, SBAS 25 , default of 9,600 bps
SSII-3-BASEN ............................. 3.3 V, DGPS base station operation, 1 Hz CP output, default of 9,600 bps
25
SSII-3-5HZ................................... 3.3 V, 5 Hz PVT output, SBAS , default baud rate of 9,600 bps
SSII-3-5HZN ................................ 3.3 V, 5 Hz PVT output, default baud rate of 9,600 bps
SSII-3-5CP-19 ............................. 3.3 V, 5 Hz carrier phase output, SBAS25, default baud rate of 19,200 bps
SSII-3-5CPN-19........................... 3.3 V, 5 Hz carrier phase output, default baud rate of 19,200 bps
25
SSII-3-1CPT-19 ........................... 3.3 V, 1 Hz carrier phase output, precise timing, SBAS , default baud rate of 19,200 bps
26
SSII-3-1CPN-19........................... 3.3 V, 1 Hz carrier phase output, default baud rate of 19,200 bps
25
SSII-3-1CPT ................................ 3.3 V, 1 Hz carrier phase output, precise timing, SBAS , default baud rate of 9,600 bps
SSII-3-1CPN ................................ 3.3 V, 1 Hz carrier phase output, default baud rate of 9,600 bps26
SSII-3-STD .................................. 3.3 V, SBAS25, default baud rate of 9,600 bps
SSII-3-STDN................................ 3.3 V, default baud rate of 9,600 bps
25
SSII-5-BASE................................ 5 V, DGPS base station operation, 1 Hz CP output, SBAS , default baud rate of 9,600 bps
SSII-5-BASEN ............................. 5 V, DGPS base station operation, 1 Hz CP output, default baud rate of 9,600 bps
25
SSII-5-5HZ................................... 5 V, 5 Hz PVT output, SBAS , default baud rate of 9,600 bps
SSII-5-5HZN ................................ 5 V, 5 Hz PVT output, default baud rate of 9,600 bps
SSII-5-5CP-19 ............................. 5 V, 5 Hz carrier phase output, SBAS25, default baud rate of 19,200 bps
SSII-5-5CPN-19........................... 5 V, 5 Hz carrier phase output, default baud rate of 19,200 bps
SSII-5-1CPT-19 ........................... 5 V, 1 Hz carrier phase output, precise timing, SBAS25, default baud rate of 19,200 bps
26
SSII-5-1CPN-19........................... 5 V, 1 Hz carrier phase output, default baud rate of 19,200 bps
24
SSII-5-1CPT ................................ 5 V, 1 Hz carrier phase output, precise timing, SBAS , default baud rate of 9,600 bps
SSII-5-1CPN ................................ 5 V, 1 Hz carrier phase output, default baud rate of 9,600 bps26
SSII-5-STD .................................. 5 V, SBAS25, default baud rate of 9,600 bps
SSII-5-STDN................................ 5 V, default baud rate of 9,600 bps
Development Kit for SUPERSTAR II
DK-FLEXPAK-SSII-BASE............ Development kit incl. FlexPak-SSII with DGPS base, 1 Hz CP output, SBAS25, 9,600 bps
DK-FLEXPAK-SSII-BASEN ......... Development kit incl. FlexPak-SSII with DGPS base, 1 Hz CP output, 9,600 bps
25
DK-FLEXPAK-SSII-5HZ .............. Development kit including FlexPak-SSII with 5 Hz PVT output, SBAS , 9,600 bps default
DK-FLEXPAK-SSII-5HZN............ Development kit including FlexPak-SSII with 5 Hz PVT output, 9,600 bps default
25
DK-FLEXPAK-SSII-5CP-19 ......... Development kit including FlexPak-SSII with 5 Hz CP output, SBAS , 19,200 bps default
DK-FLEXPAK-SSII-5CPN-19 ...... Development kit including FlexPak-SSII with 5 Hz CP output, 19,200 bps default
25
DK-FLEXPAK-SSII-1CPT-19....... Development kit incl. FlexPak-SSII with 1 Hz CP output, precise timing, SBAS , 19,200 bps
26
DK-FLEXPAK-SSII-1CPN-19 ...... Development kit incl. FlexPak-SSII with 1 Hz CP output, 19,200 bps
DK-FLEXPAK-SSII-1CPT ............ Development kit incl. FlexPak-SSII with 1 Hz CP output, precise timing, SBAS25, 9,600 bps
DK-FLEXPAK-SSII-1CPN............ Development kit incl. FlexPak-SSII with 1 Hz CP output, 9,600 bps26
DK-FLEXPAK-SSII-STD .............. Development kit including FlexPak-SSII with SBAS25, 9,600 bps default baud rate
DK-FLEXPAK-SSII-STDN ........... Development kit including FlexPak-SSII with 9,600 bps default baud rate
24
SBAS enabled models feature 10 GPS tracking channels and 2 GPS tracking channels. Non-SBAS enabled models are also
available with 12 GPS tracking channels.
25
SBAS Corrections including WAAS, MSAS and EGNOS may not be available in all areas.
26
Note that the non-SBAS variants of the 1CPT and 1CPT-19 models, 1CPN and 1CPN-19, do not provide precise timing.
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
FLEXPAK-SSII GPS RECEIVER ENCLOSURE
The FlexPakTM-SSII is a 12-channel, L1-only waterproof receiver enclosure offering standard 1 Hz PVT output, real-time
DGPS positioning, and support for NMEA and RTCM messages and SBAS corrections 27 . It features two serial ports up to
19,200 bps and optional 1 Hz or 5 Hz carrier phase output or 5 Hz PVT output. A serial cable and an automotive power
adapter are included with the FlexPak-SSII. The development kit includes a magnetic mount antenna with integrated RF
cable, an interface cable, and an AC adapter.
FlexPak-SSII Enclosure
FLEXPAK-SSII-BASE.................. DGPS base station operation, 1 Hz CP output, SBAS, default baud rate of 9,600 bps
FLEXPAK-SSII-BASEN ............... DGPS base station operation, 1 Hz CP output, default baud rate of 9,600 bps
FLEXPAK-SSII-5HZ..................... 5 Hz PVT output, SBAS, default baud rate of 9,600 bps
FLEXPAK-SSII-5HZN .................. 5 Hz PVT output, default baud rate of 9,600 bps
FLEXPAK-SSII-5CP-19 ............... 5 Hz carrier phase output, SBAS, default baud rate of 19,200 bps
FLEXPAK-SSII-5CPN-19............. 5 Hz carrier phase output, default baud rate of 19,200 bps
FLEXPAK-SSII-1CPT-19 ............. 1 Hz carrier phase output, precise timing, SBAS, default baud rate of 19,200 bps
28
FLEXPAK-SSII-1CPN-19............. 1 Hz carrier phase output, default baud rate of 19,200 bps
FLEXPAK-SSII-1CPT .................. 1 Hz carrier phase output, precise timing, SBAS, default baud rate of 9,600 bps
FLEXPAK-SSII-1CPN.................. 1 Hz carrier phase output, default baud rate of 9,600 bps28
FLEXPAK-SSII-STD .................... SBAS, default baud rate of 9,600 bps
FLEXPAK-SSII-STDN.................. Default baud rate of 9,600 bps
Development Kit for FlexPak-SSII
DK-FLEXPAK-SSII-BASE............ Development kit incl. FlexPak-SSII with DGPS base, 1 Hz CP output, SBAS, 9,600 bps
DK-FLEXPAK-SSII-BASEN ......... Development kit incl. FlexPak-SSII with DGPS base, 1 Hz CP output, 9,600 bps
DK-FLEXPAK-SSII-5HZ .............. Development kit including FlexPak-SSII with 5 Hz PVT output, SBAS, 9,600 bps default
DK-FLEXPAK-SSII-5HZN............ Development kit including FlexPak-SSII with 5 Hz PVT output, 9,600 bps default
DK-FLEXPAK-SSII-5CP-19 ......... Development kit including FlexPak-SSII with 5 Hz CP output, SBAS, 19,200 bps default
DK-FLEXPAK-SSII-5CPN-19 ...... Development kit including FlexPak-SSII with 5 Hz CP output, 19,200 bps default
DK-FLEXPAK-SSII-1CPT-19....... Development kit incl. FlexPak-SSII with 1 Hz CP output, precise timing, SBAS, 19,200 bps
28
DK-FLEXPAK-SSII-1CPN-19 ...... Development kit incl. FlexPak-SSII with 1 Hz CP output, 19,200 bps
DK-FLEXPAK-SSII-1CPT ............ Development kit incl. FlexPak-SSII with 1 Hz CP output, precise timing, SBAS, 9,600 bps
DK-FLEXPAK-SSII-1CPN............ Development kit incl. FlexPak-SSII with 1 Hz CP output, 9,600 bps28
DK-FLEXPAK-SSII-STD .............. Development kit including FlexPak-SSII with SBAS, default baud rate of 9,600 bps
DK-FLEXPAK-SSII-STDN ........... Development kit including FlexPak-SSII with default baud rate of 9,600 bps
27
SBAS enabled models feature 10 GPS tracking channels and 2 GPS tracking channels. Non-SBAS enabled models are also
available with 12 GPS tracking channels.
28
Note that the non-SBAS variants of the 1CPT and 1CPT-19 models, 1CPN and 1CPN-19, do not provide precise timing.
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
SMART ANTENNA RECEIVER/ANTENNA COMBINATION
The SMART ANTENNATM is a 12-channel, L1-only integrated receiver and antenna with standard 1 Hz PVT output, SBAS
support 29 , and real-time DGPS positioning. It is available in a variety of configurations, including an RS-232 or RS-422
interface, and features a PPS output. Development kits are available and contain a SMART ANTENNA, a magnetic mount,
an interface cable, and the Windows®-based STARVIEW software. Development kits for RS-422 SMART ANTENNAs also
contain an RS-422 to RS-232 converter.
RS-422 SMART ANTENNA with SUPERSTAR II
SA-422-12W-BASE ......... White, 12-pin plastic standard conn, DGPS base, 1 Hz CP output, SBAS, 9,600 bps default
SA-422-12W-BASEN....... White, 12-pin plastic standard conn, DGPS base, 1 Hz CP output, 9,600 bps default
SA-422-12W-5HZ ............ White, 12-pin plastic standard connector, 5 Hz PVT output, SBAS, 9,600 bps default
SA-422-12W-5HZN.......... White, 12-pin plastic standard connector, 5 Hz PVT output, 9,600 bps default
SA-422-12W-5CP-19....... White, 12-pin plastic standard connector, 5 Hz CP output, SBAS, 19,200 bps default
SA-422-12W-5CPN-19 .... White, 12-pin plastic standard connector, 5 Hz CP output, 19,200 bps default
SA-422-12W-1CPT-19..... White, 12-pin plastic standard conn, 1 Hz CP output, precise timing, SBAS, 19,200 bps default
30
SA-422-12W-1CPN-19 .... White, 12-pin plastic standard conn, 1 Hz CP output, 19,200 bps default
SA-422-12W-1CPT.......... White, 12-pin plastic standard conn, 1 Hz CP output, precise timing, SBAS, 9,600 bps default
SA-422-12W-1CPN ......... White, 12-pin plastic standard conn, 1 Hz CP output, 9,600 bps default30
SA-422-12W-STD............ White, 12-pin plastic standard connector, SBAS, default baud rate of 9,600 bps
SA-422-12W-STDN ......... White, 12-pin plastic standard connector, default baud rate of 9,600 bps
SA-422-CMW-BASE........ White, 12-pin plastic cable mount conn, DGPS base, 1 Hz CP output, SBAS, 9,600 bps default
SA-422-CMW-BASEN ..... White, 12-pin plastic cable mount conn, DGPS base, 1 Hz CP output, 9,600 bps default
SA-422-CMW-5HZ........... White, 12-pin plastic cable mount connector, 5 Hz PVT output, SBAS, 9,600 bps default
SA-422-CMW-5HZN ........ White, 12-pin plastic cable mount connector, 5 Hz PVT output, 9,600 bps default
SA-422-CMW-5CP-19 ..... White, 12-pin plastic cable mount connector, 5 Hz CP output, SBAS, 19,200 bps default
SA-422-CMW-5CPN-19... White, 12-pin plastic cable mount connector, 5 Hz CP output, 19,200 bps default
30
SA-422-CMW-1CPT-19 ... White, 12-pin plastic cable mount conn, 1 Hz CP output, precise timing, SBAS, 19,200 bps default
SA-422-CMW-1CPN-19... White, 12-pin plastic cable mount conn, 1 Hz CP output, 19,200 bps default
SA-422-CMW-1CPT ........ White, 12-pin plastic cable mount conn, 1 Hz CP output, precise timing, SBAS, 9,600 bps default
30
SA-422-CMW-1CPN........ White, 12-pin plastic cable mount conn, 1 Hz CP output, 9,600 bps default
SA-422-CMW-STD .......... White, 12-pin plastic cable mount connector, SBAS, default baud rate of 9,600 bps
SA-422-CMW-STDN........ White, 12-pin plastic cable mount connector, default baud rate of 9,600 bps
RS-232 SMART ANTENNA with SUPERSTAR II
SA-232-07W-5HZ ............ White, 7-pin plastic standard connector, 5 Hz PVT output, SBAS, 9,600 bps default
SA-232-07W-5HZN.......... White, 7-pin plastic standard connector, 5 Hz PVT output, 9,600 bps default
SA-232-07W-5CP-19....... White, 7-pin plastic standard connector, 5 Hz CP output, SBAS, 19,200 bps default
SA-232-07W-5CPN-19 .... White, 7-pin plastic standard connector, 5 Hz CP output, 19,200 bps default
SA-232-07W-1CPT-19..... White, 7-pin plastic standard conn, 1 Hz CP output, precise timing, SBAS, 19,200 bps default
30
SA-232-07W-1CPN-19 .... White, 7-pin plastic standard conn, 1 Hz CP output, 19,200 bps default
SA-232-07W-1CPT.......... White, 7-pin plastic standard conn, 1 Hz CP output, precise timing, SBAS, 9,600 bps default
30
SA-232-07W-1CPN ......... White, 7-pin plastic standard conn, 1 Hz CP output, 9,600 bps default
SA-232-07W-STD............ White, 7-pin plastic standard connector, SBAS, default baud rate of 9,600 bps
SA-232-07W-STDN ......... White, 7-pin plastic standard connector, default baud rate of 9,600 bps
SA-232-06G-5HZ............. Green, 6-pin metal standard connector, 5 Hz PVT output, SBAS, 9,600 bps default
SA-232-06G-5HZN .......... Green, 6-pin metal standard connector, 5 Hz PVT output, 9,600 bps default
SA-232-06G-5CP-19 ....... Green, 6-pin metal standard connector, 5 Hz CP output, SBAS, 19,200 bps default
SA-232-06G-5CPN-19..... Green, 6-pin metal standard connector, 5 Hz CP output, 19,200 bps default
SA-232-06G-1CPT-19 ..... Green, 6-pin metal standard conn, 1 Hz CP output, precise timing, SBAS, 19,200 bps default
30
SA-232-06G-1CPN-19..... Green, 6-pin metal standard conn, 1 Hz CP output, 19,200 bps default
SA-232-06G-1CPT .......... Green, 6-pin metal standard connector, 1 Hz CP output, precise timing, SBAS, 9,600 bps default
SA-232-06G-1CPN .......... Green, 6-pin metal standard connector, 1 Hz CP output, 9,600 bps default30
SA-232-06G-STD ............ Green, 6-pin metal standard connector, SBAS, default baud rate of 9,600 bps
SA-232-06G-STDN.......... Green, 6-pin metal standard connector, default baud rate of 9,600 bps
29
SBAS enabled models feature 10 GPS tracking channels and 2 GPS tracking channels. Non-SBAS enabled models are also
available with 12 GPS tracking channels.
30
Note that the non-SBAS variants of the 1CPT and 1CPT-19 models, 1CPN and 1CPN-19, do not provide precise timing.
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
Development Kit for RS-422 SMART ANTENNA with SUPERSTAR II
DK-SA-422-12W-BASE ............... Dev kit with white, 12-pin standard conn, DGPS base, 1 Hz CP output, SBAS, 9,600 bps
DK-SA-422-12W-BASEN............. Dev kit with white, 12-pin standard conn, DGPS base, 1 Hz CP output, 9,600 bps
DK-SA-422-12W-5HZ .................. Dev kit with white, 12-pin standard connector, 5 Hz PVT output, SBAS, 9,600 bps default
DK-SA-422-12W-5HZN ............... Dev kit with white, 12-pin standard connector, 5 Hz PVT output, 9,600 bps default
DK-SA-422-12W-5CP-19............. Dev kit with white, 12-pin standard connector, 5 Hz CP output, SBAS, 19,200 bps default
DK-SA-422-12W-5CPN-19 .......... Dev kit with white, 12-pin standard connector, 5 Hz CP output, 19,200 bps default
31
DK-SA-422-12W-1CPT-19 .......... Dev kit with white, 12-pin std conn, 1 Hz CP output, precise timing, SBAS, 19,200 bps
DK-SA-422-12W-1CPN-19 .......... Dev kit with white, 12-pin std conn, 1 Hz CP output, 19,200 bps
DK-SA-422-12W-1CPT................ Dev kit with white, 12-pin std conn, 1 Hz CP output, precise timing, SBAS, 9,600 bps default
DK-SA-422-12W-1CPN ............... Dev kit with white, 12-pin std conn, 1 Hz CP output, 9,600 bps default31
DK-SA-422-12W-STD.................. Dev kit with white, 12-pin standard connector, SBAS, default baud rate of 9,600 bps
DK-SA-422-12W-STDN ............... Dev kit with white, 12-pin standard connector, default baud rate of 9,600 bps
Development Kit for RS-232 SMART ANTENNA with SUPERSTAR II
DK-SA-232-07W-5HZ .................. Dev kit with white, 7-pin plastic connector, 5 Hz PVT output, SBAS, 9,600 bps default
DK-SA-232-07W-5HZN ............... Dev kit with white, 7-pin plastic connector, 5 Hz PVT output, 9,600 bps default
DK-SA-232-07W-5CP-19............. Dev kit with white, 7-pin plastic connector, 5 Hz CP output, SBAS, 19,200 bps default
DK-SA-232-07W-5CPN-19 .......... Dev kit with white, 7-pin plastic connector, 5 Hz CP output, 19,200 bps default
DK-SA-232-07W-1CPT-19 .......... Dev kit with white, 7-pin plastic conn, 1 Hz CP output, precise timing, SBAS, 19,200 bps
31
DK-SA-232-07W-1CPN-19 .......... Dev kit with white, 7-pin plastic conn, 1 Hz CP output, 19,200 bps
DK-SA-232-07W-1CPT................ Dev kit with white, 7-pin plastic conn, 1 Hz CP output, precise timing, SBAS, 9,600 bps
31
DK-SA-232-07W-1CPN ............... Dev kit with white, 7-pin plastic conn, 1 Hz CP output, 9,600 bps
DK-SA-232-07W-STD.................. Dev kit with white, 7-pin plastic connector, SBAS, default baud rate of 9,600 bps
DK-SA-232-07W-STDN ............... Dev kit with white, 7-pin plastic connector, default baud rate of 9,600 bps
DK-SA-232-06G-5HZ................... Dev kit with green, 6-pin metal connector, 5 Hz PVT output, SBAS, 9,600 bps default
DK-SA-232-06G-5HZN ................ Dev kit with green, 6-pin metal connector, 5 Hz PVT output, 9,600 bps default
DK-SA-232-06G-5CP-19 ............. Dev kit with green, 6-pin metal connector, 5 Hz CP output, SBAS, 19,200 bps default
DK-SA-232-06G-5CPN-19........... Dev kit with green, 6-pin metal connector, 5 Hz CP output, 19,200 bps default
DK-SA-232-06G-1CPT-19 ........... Dev kit with green, 6-pin metal conn, 1 Hz CP output, precise timing, SBAS, 19,200 bps
31
DK-SA-232-06G-1CPN-19........... Dev kit with green, 6-pin metal conn, 1 Hz CP output, 19,200 bps
DK-SA-232-06G-1CPT ................ Dev kit with green, 6-pin metal connector, 1 Hz CP output, precise timing, SBAS, 9,600 bps
DK-SA-232-06G-1CPN................ Dev kit with green, 6-pin metal connector, 1 Hz CP output, 9,600 bps31
DK-SA-232-06G-STD .................. Dev kit with green, 6-pin metal connector, SBAS, default baud rate of 9,600 bps
DK-SA-232-06G-STDN................ Dev kit with green, 6-pin metal connector, default baud rate of 9,600 bps
SOFTWARE UPGRADES FOR SUPERSTAR II-BASED PRODUCTS
To increase the functionality and features of your SUPERSTAR II-based receiver, software model upgrades are available
for purchase. Upgrades can be completed in the field using a software utility provided by NovAtel. Note that only one
model can be loaded on the SUPERSTAR II receiver at any given time and, thus, model upgrades will replace the current
model with the desired new model. As a result, any features found only in the current model will no longer be available after
the upgrade. Upgrades can be completed between non-equivalent models (e.g. upgrade from STD to 1CPT-19), or
between equivalent models to disable or enable SBAS tracking (e.g. upgrade from 5HZ to 5HZN).
Upgrades between non-equivalent models
SW-UG-BASE ........Upgrade to replace current model with DGPS base station, 1 Hz CP output, SBAS, 9,600 bps default
SW-UG-BASEN ......Upgrade to replace current model with DGPS base station, 1 Hz CP output, 9,600 bps default
SW-UG-5HZ ...........Upgrade to replace current model with 5 Hz PVT output, SBAS, default of 19,200 bps
SW-UG-5HZN.........Upgrade to replace current model with 5 Hz PVT output, default of 19,200 bps
SW-UG-5CP-19 ......Upgrade to replace current model with 5 Hz carrier phase output, SBAS, default of 19,200 bps
SW-UG-5CPN-19 ...Upgrade to replace current model with 5 Hz carrier phase output, default of 19,200 bps
SW-UG-1CPT-19....Upgrade to replace current model with 1 Hz carrier phase output, precise timing, SBAS, 19,200 bps
31
SW-UG-1CPN-19 ...Upgrade to replace current model with 1 Hz carrier phase output, default of 19,200 bps
SW-UG-1CPT .........Upgrade to replace current model with 1 Hz carrier phase output, precise timing, SBAS, 9,600 bps
SW-UG-1CPN ........Upgrade to replace current model with 1 Hz carrier phase output, default of 9,600 bps31
Upgrades to enable or disable SBAS tracking between equivalent models
SW-UG-NSBAS ......Upgrade to replace current model with equivalent non-SBAS enabled model31
SW-UG-SBAS ........Upgrade to replace current model with equivalent SBAS enabled model
31
Note that the non-SBAS variants of the 1CPT and 1CPT-19 models, 1CPN and 1CPN-19, do not provide precise timing.
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
ACCESSORIES FOR SSII L1 RECEIVERS
ANTENNAS
Antennas
201-990148-152 .....L1, AVL antenna with +12 dB gain, 20 ft cable with TNC connector, removable magnet
201-990146-716 .....L1, AVL antenna with +12 dB gain, 20 ft cable with MCX connector, removable magnet
201-990147-606 .....L1, geodetic antenna with +26 dB gain, TNC connector, built-in ground plane, 1”-14 thread mounting
201-990147-432 .....L1, AVL antenna with +12 dB gain, TNC connector, 5/8”-11 thread mounting
Antenna Accessories
270-990146-890 .....Magnetic mount for 1”-14 thread mounting antenna
530-990300-203 .....Bushing adapter, 5/8”-11 to 1”-14 thread
POWER AND COMMUNICATION CABLES
FlexPak-SSII
01017374................Power cable with automotive adapter (included with FlexPak-SSII)
01017375................Null-modem cable with Deutsch and female DB-9 connectors (included with FlexPak-SSII)
01017518................Straight serial cable with Deutsch and male DB-9 connectors
RS-422 SMART ANTENNA
217-601764-002 .....30 meter interface cable with 12-pin connector and open wires
217-601764-003 .....15 meter interface cable with 12-pin connector and open wires
RS-232 SMART ANTENNA with 7-pin plastic connector
217-601742-003 .....5 meter interface cable with 7-pin plastic connector and DB-9 and automotive adapter
RS-232 SMART ANTENNA with 6-pin metal connector
217-601798-003 .....5 meter interface cable with 6-pin metal connector and DB-9 and automotive adapter
217-601798-004 .....15 meter interface cable with 6-pin metal connector and DB-9 and automotive adapter
OTHER
40023098................AC adapter with auto receptacle and IEC-320-C14 input inlet (removable IEC-320 to North American
plug included, requires addition of region-specific plug for use outside North America)
40023106................RoHS compliant AC adapter with auto receptacle and IEC-320-C14 input inlet (removable IEC-320 to
North American plug included, requires addition of region-specific plug for use outside North America)
40023100................RS-422 to RS-232 converter with DB-9 connector
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
SPAN TECHNOLOGY
IMU-G2
The IMU-G2 adds inertial capabilities to your GPS receiver for position and attitude data and continuous positioning. The IMUG2 is compatible with IMU capable models of the DL-4plus, ProPak-G2plus, or ProPak-LBplus and includes an IMU to receiver
interface cable.
For use with ProPak-G2plus or DL-4plus
IMU-G2-H58 32 ................. IMU-G2 enclosure with 1 degree per hour IMU for use with ProPak-G2plus or DL-4plus
32
IMU-G2-H62 .................. IMU-G2 enclosure with 5 degree per hour IMU for use with ProPak-G2plus or DL-4plus
IMU-G2-000 ..................... IMU-G2 enclosure without IMU for use with ProPak-G2plus or DL-4plus
01017384......................... Interface cable for IMU-G2 and ProPak-G2plus or DL-4plus (included with IMU-G2-xxx)
For use with ProPak-LBplus
IMU-LB-H5832 .................. IMU-G2 enclosure with 1 degree per hour IMU for use with ProPak-LBplus
IMU-LB-H6232 .................. IMU-G2 enclosure with 5 degree per hour IMU for use with ProPak-LBplus
IMU-LB-000 ..................... IMU-G2 enclosure without IMU for use with ProPak-LBplus
01017393......................... Interface cable for IMU-G2 and ProPak-LBplus (included with IMU-LB-xxx)
SPAN GPS RECEIVER ENCLOSURES
PROPAK-G2+DB9-RT2Wi........... IMU support, 2 cm RTK positioning, accepts SBAS 33 corrections, real-time DGPS, raw data
PROPAK-LB+HP-RT2Wi ............. IMU support, 2 cm RTK, accepts OmniSTAR HP 34 ,
35
33
CDGPS , and SBAS corrections, raw data
PROPAK-G2+DB9-424-RT2Wi ... IMU support, 2 cm RTK positioning,
accepts SBAS33 corrections, real-time DGPS, raw data
DL-4+RT2Wi................................ IMU support, 2 cm RTK positioning, accepts SBAS33 corrections, real-time DGPS, raw data out
DL-4+424-RT2Wi......................... IMU support, 2 cm RTK positioning, accepts SBAS33 corrections, real-time DGPS, raw data out
32
Part number IMU-xx-H58 is formerly IMU-xx-H11, while part IMU-xx-H62 is formerly IMU-xx-H17. The change in part numbers is to
accommodate a change in part numbers from the manufacturer.
33
SBAS Corrections including WAAS, MSAS and EGNOS may not be available in all areas.
34
A subscription is required to OmniSTAR HP service, which may not be available in all areas.
35
CDGPS Corrections may not be available in all areas.
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
POST-PROCESSING SOFTWARE
NovAtel offers a complete selection of Waypoint post-processing software, including Inertial Explorer for use with NovAtel’s
SPAN Technology system. Please note that the part numbers by default indicate a USB security key, with a –U suffix. A
Parallel security key (-P) must be specifically ordered if desired. Please contact NovAtel for information on software updates.
Post Processing (Win98/2000/XP) 36, 37
SW-PP-GPSIMU-U.......... Inertial Explorer post-processing software for GPS/INS applications
SW-PP-GMOV-U ............. GrafMov post-processing software (GrafNav/GrafNet with moving baseline option)
SW-PP-GNVT-U .............. GrafNav/GrafNet post-processing software
SW-PP-GNST-U .............. GrafNav/GrafNet Static post-processing software (no kinematic processing)
SW-PP-LGNV-U .............. GrafNav Lite post-processing software (1 Hz, L1 only)
SW-PP-UTIL-U ................ GrafNav Utilities software (data conversion, download, data logging, and coordinate conversion)
Post Processing Version Updates 38, 39 , 40 , 41
SW-UD-PP-GPSIMU ....... Update to latest version of Inertial Explorer
SW-UD-PP-GMOV .......... Update to latest version of GrafMov
SW-UD-PP-GNVT ........... Update to latest version of GrafNav/GrafNet
SW-UD-PP-GNST ........... Update to latest version of GrafNav/GrafNet – Static Only
SW-UD-PP-LGNV............ Update to latest version of GrafNav Lite
SW-UD-PP-UTIL.............. Update to latest version of GrafNav Utilities
Post Processing Product Upgrades 42, 43 , 44
SW-UG-PP-GPSIMU ....... Upgrade to Inertial Explorer
SW-UG-PP-GMOV .......... Upgrade to GrafMov
SW-UG-PP-GNVT ........... Upgrade to GrafNav/GrafNet
SW-UG-PP-GNST ........... Upgrade to GrafNav/GrafNet (Static Only)
Post Processing Key Exchanges
SW-PP-EXCH-GPSIMU .. Exchange Parallel key for USB for Inertial Explorer
SW-PP-EXCH-GMOV...... Exchange Parallel key for USB for GrafMov
SW-PP-EXCH-GNVT....... Exchange Parallel key for USB for GrafNav/GrafNet
SW-PP-EXCH-GNST....... Exchange Parallel key for USB for GrafNav/GrafNet (Static Only)
SW-PP-EXCH-LGNV....... Exchange Parallel key for USB for GrafNav Lite
SW-PP-EXCH-UTIL......... Exchange Parallel key for USB for GrafNav Utilities
Real Time Kinematic (2000/XP)
SW-RT-R20-U ................. RTKNav 1-20 Remotes. Full RTK capabilities + Moving Baseline
SW-RT-R6-U ................... RTKNav 1-6 Remotes. Full RTK capabilities + Moving Baseline
SW-RT-R3-U ................... RTKNav 1-3 Remotes. Full RTK capabilities + Moving Baseline
SW-RT-MV-U .................. RTKav 1 Remote. Full RTK capabilities + Moving Baseline + Heading
SW-RT-R1-U ................... RTKNav 1 Remote. Full RTK capabilities
SW-RT-AZ-U ................... Azimuth Determination Only
36
Software updates are free for one year after purchase. Technical support by phone, fax and email is free for one year after date of
purchase. After one year from date of purchase, updates are sold at the listed prices and will include one year of free updates and
technical phone, fax or email support. Date of purchase is verified by your four-digit software key serial number. Support may be
denied if payment is delinquent.
37
All part numbers are followed with a “-U” for a USB key as default. A Parallel key “-P” is supplied by specific request only.
38
Version updates for multi-license users is 50% of first upgrade for the 2nd and each additional copy.
39
Version updates for software older than version 7.00 will be subject to a 50% surcharge.
40
Version updates purchased within one month after a free-upgrade period are eligible for a 25% discount.
41
Version updates do not require a new software key. Key exchange cost is zero if an update or upgrade is purchased.
42
If the customer requests a key exchange, the part number should be followed by either “-U” (USB) or “-P” (Parallel Port). The serial
number of existing key must be provided. Call NovAtel/Waypoint Products Group for exchange procedure.
43
Product upgrades do not require a new software key.
44
For a new key and a version update, the full product price will be charged, and the difference credited upon old key return.
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
Real Time Kinematic (2000/XP) Updates
SW-UD-RT-R20............... Update to latest version of RT-R20
SW-UD-RT-R6................. Update to latest version of RT-R6
SW-UD-RT-R3................. Update to latest version of RT-R3
SW-UD-RT-MV ................ Update to latest version of RT-MV
SW-UD-RT-R1................. Update to latest version of RT-R1
SW-UD-RT-AZ................. Update to latest version of RT-AZ
Real Time Kinematic (2000/XP) Upgrades
SW-UG-RT-R20............... Upgrade to RT-R20
SW-UG-RT-R6................. Upgrade to RT-R6
SW-UG-RT-R3................. Upgrade to RT-R3
SW-UG-RT-MV................ Upgrade to RT-MV
Real Time Kinematic Key Exchanges
SW-RT-EXCH-R20 .......... Exchange Parallel key for USB for RT-R20
SW-RT-EXCH-R6 ............ Exchange Parallel key for USB for RT-R6
SW-RT-EXCH-R3 ............ Exchange Parallel key for USB for RT-R3
SW-RT-EXCH-MV ........... Exchange Parallel key for USB for RT-MV
SW-RT-EXCH-R1 ............ Exchange Parallel key for USB for RT-R1
SW-RT-EXCH-AZ ............ Exchange Parallel key for USB RT-AZ
Development Options
SW-RT-STC-U................. RtStatic Module (sold only in addition to RTKNav, R3, R6, R20)
SW-RT-DEV-U................. RtDLL/SIOGPS DLL Developer’s Kit for processing and interface
(one time cost and must be purchased with one of the above RTKNav licenses)
Manuals
OM-20000097.................. GrafNav/GrafNet Manual
OM-20000098.................. Inertial Explorer Manual
OM-20000099.................. RTKNav Manual
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
SPECIALTY PRODUCTS
EURO-3M GPS RECEIVER OEM CARD 45
The Euro-3MTM features Signal Quality Monitoring (SQM) and the patent-pending SafeTrak cross-correlation verification
algorithm. The standard version includes 14 channels for L1/L2 tracking and 4 channels for L1 GEO tracking. Alternately,
the Euro-3M is offered with MEDLL multipath reduction technology combined with 8 L1/L2 channels and 1 L1 GEO channel.
An enclosure for the Euro-3M card is also available with an optional high-stability internal oscillator.
EURO-3M-L1L2GEO ................... 14-channel L1/L2 tracking and 4-channel L1 GEO tracking
EURO-3M-MEDLL ....................... 8-channel L1/L2 tracking and 1-channel L1 GEO tracking with MEDLL
EUROPAK-3M-L1L2GEO............ Enclosed Euro-3M receiver 46
EUROPAK-3M-MEDLL................ Enclosed Euro-3M-MEDLL receiver46
EUROPAK-3MT-L1L2GEOT ....... Enclosed Euro-3M receiver with internal oscillator46
EUROPAK-3MT-MEDLLT ........... Enclosed Euro-3M-MEDLL receiver with internal oscillator46
EUROPAK-L1L5E5A RECEIVER 47
The EuroPak-L1L5E5a NovAtel’s L1L5E5a receiver offers superior 16 channel tracking of GPS L1/L5, Galileo L1/E5a and SBAS
signals, in a Euro form-factor card, packaged in the popular EuroPak enclosure. Tracks and decodes GPS L1 and L5, SBAS L1 and L5
and Galileo L1 and E5a. Digital Pulse Blanking is included on GPS L1 and L5 and Galileo L1 and E5a for radar and pulsed DME
interference mitigation. The EuroPak-L1L5E5a enclosure includes L1 GPS RFI improvements as developed for the US WAAS
reference receivers. The EuroPak-L1L5E5a is available with an external OCXO input or with a built in OCXO (T version).
46
EUROPAK-L1L5E5A ................... GPS L1/L5 & Galileo L1/E5a receiver in EuroPak Enclosure
EUROPAK-L1L5E5AT ................. GPS L1/L5 & Galileo L1/E5a receiver in EuroPak Enclosure with internal oscillator46
MULTIPATH TOOLS
NovAtel offers a wide range of products for managing multipath.
Portable MEDLL Receiver including Multipath Meter Software
Portable MEDLL Receiver Lease (per month with a minimum of one month)
Multipath Assessment Tool (MAT)
40023090................Portable MEDLL AC adapter (+24 VDC @ 3 A)
WAAS
The WAAS Receiver includes Multipath Estimating Delay Lock Loop (MEDLL®) and Narrow Correlator® technologies. Units
are available for lease.
WAAS Receiver Lease (per month with a minimum of one month)
L1/L5 RACK-MOUNT RECEIVER
The L1/L5 receiver features L5 tracking with 2-channel digital pulse blanking and 10-channel L1 GPS tracking. It includes
three serial ports in a 19” rack-mount metal enclosure.
L1/L5 RECEIVER ............ Rack-mount L1/L5 receiver
ANTENNAS
Wideband, Passive Antenna
GPS-704X........................ Suitable for receiving GPS L1/L2/L5, Galileo L1/E5a/b, E6, and GLONASS L1/L2 48
45
The commands and logs for these products are based on NovAtel’s WAAS and GUS Reference Receivers and may have significant
differences when compared to the standard NovAtel commercial receiver products.
46
AC adapter 40023098 is recommended for use with the EuroPak enclosures.
47
The L1L5E5a receiver has not undergone qualification testing and should be considered prototype equipment for experimental
evaluation only.
48
Requires External LNA. Please refer to the NovAtel User Guide for the GPS-704X Antenna.
1-800-NOVATEL
All prices shown in USD – Rev 23
www.novatel.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising