Graco Reactor Fusion 2005

Graco Reactor Fusion 2005
™
REACTOR & FUSION
™
PROTECTIVE COATINGS
High-performance proportioning systems designed to
apply polyurea, foam and other fast-set materials.
P R O V E N Q U A L I T Y. L E A D I N G T E C H N O LO G Y.
Achieve Ultimate Coating Results
When performance, control and accuracy
are critical to your application, Graco’s
Reactor™ and Fusion™ offer the ultimate
plural component proportioning solution!
This advanced system is designed to apply
polyurea, foam and other materials that require
accurate temperatures and pressures necessary
for superior coating results.
Foam
Polyurea
• Wall insulating
• Concrete
• Tank and pipe coating
• Potable water
• Foam roofing
• Truck bedliners
• In-plant OEM
• Marine and ship
building
• Adhesives and caulks
• Rim and band joist
• Wastewater
treatment
• Secondary
containment
• Waterproofing
Increased Performance and Productivity
Advanced Features for
High Performance Results
▲
▲
Accurate heating with precise
temperature sensing.
▲
System controls with diagnostics,
auto-shutdown and job data reporting.
▲
2
Easy-to-use and dependable for
increased productivity.
Portable, wheeled cart allows you
to get closer to the job and takes
up less trailer space.
A Complete High Performance System
From the superior performance of the Reactor proportioning system to the increased productivity of the
Fusion spray gun, this plural component system is hard to beat! Never before has one system offered such
an easy-to-use coating solution.
4
5
1
2
3
3
6
7
1
SUPERIOR EFFICIENCY OF ELECTRIC MOTORS
Improves performance and reduces operating costs
2
PRESSURE BALANCE VALVES
Offer quick and easy balancing of system pressures
3
EASY-TO-SERVICE FLUID SECTION
Reduces maintenance and increases productivity
4
HIGH OUTPUT HEATER(S)
Keep temperatures constant with up to 15,300 watts
of energy
5
ISO PUMP FLUSH SYSTEM
Reduces maintenance and seal failure by circulating a
plasticizer (TSL) through the throat packing area
6
ELECTRIC HEATED HOSE AND WHIP HOSES
Resists moisture and are interchangeable with
competitive hoses
7
EASY-TO-USE FUSION SPRAY GUN
Offers superior mix quality, less maintenance and
downtime, easy clean-up and longer component life
3
Select your System Components in 4 Easy Steps!
STEP ONE
1
REACTOR PROPORTIONERS
STEP TWO
REACTOR
Choose from 9 models with electric, air or hydraulic motors.
HEATED AND WHIP HOSES
KEY FEATURES:
• Portable units for job site flexibility
2 HEATED HOSE
• Quick knock down fluid sections
Choose from pressure ratings of 2000 psi or
• Optional data reporting capabilities
3500 psi (138 to 241 bar, 13.8 to 24.1 MPa).
• Foam models rated at 2000 psi (138 bar, 13.8 MPa)
3 HEATED WHIP HOSE
• Polyurea models rated up to 3500 psi (241 bar, 24.1 MPa)
Choose from pressure ratings of 2000 psi or 3500
psi (138 to 241 bar, 13.8 to 24.1 MPa).
STEP THREE
4 FUSION GUNS
Choose from air or mechanical purge with a round or flat pattern. Both models rated at 3500 psi (241 bar, 24.1 MPa).
AIR PURGE GUN
MECHANICAL PURGE GUN
KEY FEATURES:
KEY FEATURES:
• Easiest gun to use on the market
• Best mix on the market
• Clean up in 10 seconds
• Smoother finish for low output applications
• Longer life components
• Mix module lasts 10 times longer than the competition
STEP FOUR
SUPPLY PROCESSING EQUIPMENT
5
SUPPLY PUMP
Choose from diaphragm or piston pumps for standard materials in drum mount or
wall mount. Select a 2:1 piston pump for materials with higher viscosities.
6
AGITATOR KITS
Choose a kit to agitate your resin for a consistent coating. Graco’s patented
Twistork® agitators are very low shear to minimize material frothing.
4
5 SUPPLY PUMP
AGITATOR KITS
REACTOR
6
1
3
HEATED
WHIP HOSE
4
FUSION SPRAY GUN
2 HEATED HOSE
R EACTOR / FUSION SYSTE M
5
Fusion Gun Technology
Air-Purge Gun
The Easiest to Use Gun on the Market!
• Easy-to-use design makes maintenance quick and easy
• Longer life with all hardened SST mix chambers and side seals
• Advanced mix module and tip design improves mixing
• Solvent resistant components and o-rings allow you to soak the
whole gun without swelling or damage
• Quick-Shot grease port reduces end-of-day maintenance to seconds
Daily Maintenance in 10 Seconds Flat!
Easy Maintenance
Hand tight connections reduce the need for tools, making maintenance
quick and easy
1
2
Remove the front cap
for easy access
3
Fewer parts,
less maintenance
Remove the fluid section
from the gun
Integrated Features make the Fusion Air Purge
the Gun of Choice in the Market
6
1
Quick-Release Fluid Housing
Easily change mix chambers without tools
2
Cyclone-Mix™ Chamber
Hardened stainless steel construction for longer life
3
Durable SST Side Seals
Rugged stainless steel construction for longer life
4
Hand-Tightened Front Cap
Allows for cleaning and maintenance of mix
chamber and seals without tools
5
Ergonomic Handle
Smooth curved handle improves operator comfort
and reduces fatigue
6
Check Valves with Screens
Cartridge design for easy maintenance
1
2
4
3
6
5
Mechanical-Purge Gun
The Best Mix on the Market!
• Superior mixing
• Smoother finish and better atomization
• Widest range of flow rates
• Low output thin mil applications
• Graco Fusion MP gun offers more features than
all other competitive mechanical purge guns combined!
Mechanical Purge | 247075
Air Purge | 246101
Spray Longer!
Sprays 10
• PolyCarballoy mix modules last 10 times
longer than the competition
• CeramTip™ lasts 4 times longer than the
competition and is easier to change
times more material!
POLYCAR BALLOY M IX MODU LE LI F E
• Significantly reduces repair and
maintenance costs
COM P ETITOR’S MODU LE LI F E
Fusion Mechanical Purge Does it All!
1
PolyCarballoy™ Mix Module
Lasts 10 times longer than competitive modules
2
CeramTip
Lasts 4 times longer than competitors’
3
Purge Rod
Easy-to-set, one piece rod for longer life
4
Adjustable Front Packing
5
Ergonomic Handle
Smooth curved handle improves operator comfort
and reduces fatigue
6
Check Valves with Screens
Cartridge design for easy maintenance
1
3
2
4
6
5
7
Engineered with the User in Mind!
Reactor for Foam
Reactor for Polyurea
• Electric, air or hydraulic operation
• Electric, air or hydraulic operation
• Applies spray foams, adhesives, polyurea
and other high-performance coatings
• Applies polyurea coatings, spray foams and
adhesives requiring higher temperature and pressure
• 2000 psi (138 bar, 13.8 MPa)
• 2500 to 3500 psi (172 to 241 bar, 17.2 to 24.1 MPa)
• 20 to 50 lbs/min output (9.1 to 22.7 kg/min)
• 1 to 3.5 gpm output (3.8 to 13.3 lpm)
Revolutionary Vertical Pump Design
• Circular crank drive delivers smoother operation by eliminating the
quick pump changeover of traditional horizontal pumping systems
• Slower pump changeover ensures proper material
loading and maintains accurate mix ratio
• Improved pump loading reduces the size of supply
pumps needed for the system
Superior Heating
• Digital heat and pressure for greater application
accuracy and control
• High wattage heaters easily reach and maintain
required temperatures
SMART MIX CONTROL PANEL
REMOTE MOUNTABLE
Up to 300 ft (91 m) for application flexibility
TARGET AND ACTUAL TEMPERATURE
Easily set target temperature and display
actual temperature to verify operation
CYCLE COUNTER
Reduces material waste
PARK - LOWERS ISO PUMP ROD
Lengthens pump seal life by preventing
ISO reaction
PRESSURE READOUT IN PSI OR BAR
Provides regional flexibility
8
Sinusoidal motion eliminates quick
pump changeover found in traditional
horizontal pumping systems.
Application Control
• Data reporting provides valuable job application information
• User can output data in spread sheet format for quick graphing
of application temperatures and pressures
• System diagnostic codes for quick and easy troubleshooting
• Provide data to validate job accuracy while differentiating
yourself from the competition!
Temperature
(°F)
190
Temp A
Temp B
Hose temp
180
170
160
0
20
Reactor Data
Reporting Kit
40
60
80
Time (minutes
)
100
120
2060
Pressure (PSI
)
Pressure A
Pressure B
2040
2020
2000
0
20
40
60
80
Time (minutes
)
100
120
Data Reporting Kit
4 Diagnostic codes record and isolate any problems
1 Date and time stamp recorded every
10, 30 or 60 seconds
2
encountered, providing a great tool for trouble
shooting, maintenance and training new operators
Records actual temperatures and pressures
5 Precise material usage for more accurate
3 Set point temperatures and pressures
job tracking and record keeping
Graco, Inc.
Plural Component Proportioner Reactor E-30
Status Report as of 5/3/2004 8:43:19
Temperature units - Fahrenheit
Pressure units - PSI
Temp Hose
PSI A
PSI B
Cycles
Set A
Set B
Set Hose
Set PSI
Diag A
Diag B
Diag Hose
Diag Pump
63
142
141
149
149
152
152
63
122
121
121
161
164
164
64
117
119
129
147
147
146
56
1861
1861
225
1861
1823
1786
18
1616
1616
131
1710
1673
1654
1612
1914
1914
1915
4177
4177
0
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
500
500
500
500
1700
1700
1700
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Gallons
Temp B
Date and Time
4/23/2004 9:36:23
4/23/2004 13:18:03
4/23/2004 13:18:13
4/23/2004 13:18:23
4/26/2004 10:31:44
4/26/2004 10:31:53
4/26/2004 10:32:03
Temp A
1
4
3
2
Actual Report from Data Reporting Kit
5
43.85
52.06
52.06
52.09
113.61
113.61
0.00
9
Reactor and Fusion Gun Selection Guide
Mix Chambers, Mix
Modules and Tips
Fusion Gun*
Mix
Chamber/
Tip
Pattern at
Polyurea
24 in (61 cm)
in GPM
from target @ 2000 psi
P O LY U R E A
EXP1 AXP2 EXP2 HXP3
FUSION AIR PURGE ROUND
AIR PURGE
246099
246100
NA
248617
NA
246101
NA
246102
NA
246103
NA
246104
NA
246105
NA
AR = Air Round
AW = Air Wide Round
Aircap = 15B210
AR2020
AR2929
AW2828
AR3737
AW3333
AR4242
AW3939
AR5252
AW4646
AR6060
AW5757
AR7070
AW6464
AR8686
AW8282
5 in (127 mm)
8 in (203 mm)
15 in (381 mm)
9 in (227 mm)
15 in (381 mm)
11 in (279 mm)
16 in (406 mm)
12 in (305 mm)
18 in (457 mm)
14 in (356 mm)
18 in (457 mm)
15 in (381 mm)
22 in (564 mm)
18 in (457 mm)
24 in (610 mm)
0.5 gpm
1.1 gpm
1.1 gpm
1.3 gpm
1.3 gpm
1.6 gpm
1.6 gpm
2.4 gpm
2.4 gpm
3.2 gpm
3.2 gpm
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
10 in (254 mm)
10 in (254 mm)
14 in (356 mm)
18 in (457 mm)
0.4 gpm
0.9 gpm
1.2 gpm
1.6 gpm
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
0.5 gpm
0.9 gpm
1.2 gpm
1.7 gpm
2.7 gpm
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
0.15 gpm
0.3 gpm
0.4 gpm
0.6 gpm
0.9 gpm
1.1 gpm
1.3 gpm
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
FUSION AIR PURGE FLAT
247101
247102
247124
247138
AF = Air Flat
FTO = Flat Tip Air
Aircap = 15B801
AF2020 (FT0424)
AF2929 (FT0438)
AF4242 (FT0638)
AF5252 (FT0848)
FUSION MECHANICAL PURGE ROUND
MECHANICAL PURGE
RTM050
MR4747
MR = Mechanical Round
XR = Direct Impinge Round
RTM = Round Tip Mechanical
247003
247007
247212
247219
247226
247232
247239
247246
XR2323 (RTM030)
MR2929, XR2929 (RTM040)
MR3535, XR3535 (RTM040)
MR4747, XR4747 (RTM055)
MR5757, XR5757 (RTM070)
MR6666 (RTM080)
MR8282 (RTM090)
MR9494 (RTM110)
6 in (152 mm)
8 in (203 mm)
8 in (203 mm)
9 in (227 mm)
10 in (254 mm)
11 in (279 mm)
12 in (305 mm)
12 in (305 mm)
FUSION MECHANICAL PURGE FLAT
247051
247058
247061
247065
247075
247082
247089
XF1313 (FTM424)
MF1818, XF1818 (FTM424)
XF 2323 (FTM424)
MF2929, XF2929 (FTM424)
MF3535, XF3535 (FTM638)
MF4747, XF4747 (FTM638)
MF5757, XF5757 (FTM638)
10 in (254 mm)
10 in (254 mm)
10 in (254 mm)
10 in (254 mm)
14 in (356 mm)
14 in (356 mm)
14 in (356 mm)
*Mix chamber/tip included with Fusion gun purchase. Additional Fusion guns listed in ordering information.
LEGEND
XF2929
FTM424
MF = Mechanical Flat
XF = Direct Impinge
FTM = Flat Tip Mechanical
REACTOR MODELS
A = Air E = Electric
FUSION GUNS
Air Purge
Mechanical Purge
10
H = Hydraulic
Type
AR
AW
AF
MR
XR
MF
XF
ISO
Orifice
42
39
29
47
35
29
29
RES
Orifice
42
39
29
47
35
29
29
Mix
Part No.
AR4242
AW3939
AF2929
MR4747
XR3535
MF2929
XF2929
Tip
Style
NA
NA
FTO
RTM
RTM
FTM
FTM
Double for
fan width
NA
NA
6
Flat Tip
Orifice
Round Tip
Orifice
38
050
040
4
6
24
38
Tip
Part No.
FT0638
RTM050
RTM040
FTM424
FTM638
Foam
lb/min
@ 1000 psi
3 lb/min
7 lb/min
7 lb/min
8 lb/min
8 lb/min
9 lb/min
9 lb/min
14 lb/min
14 lb/min
19 lb/min
19 lb/min
34 lb/min
34 lb/min
52 lb/min
52 lb/min
3 lb/min
7 lb/min
9 lb/min
14 lb/min
4 lb/min
7 lb/min
8 lb/min
12 lb/min
15 lb/min
24 lb/min
30 lb/min
39 lb/min
1.5 lb/min
2.0 lb/min
2.5 lb/min
3.0 lb/min
6.0 lb/min
8.0 lb/min
9.0 lb/min
FOAM
E20
A25
E30
H50
A50
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Reactor Plural-Component
Proportioning Systems
E-XP2 | 246028
E = Electric
AXP2 | 246752
A = Air
H-50 | 246039
H = Hydraulic
11
Choose Graco’s High Performance Fusion and
Reactor Proportioning System Today!
Improve productivity, maximize spray time, ensure quality and receive
the best value for your money with Graco’s Reactor and Fusion!
Not only is this advanced plural component proportioning solution designed
with the user in mind, but it offers the ultimate coating solution.
IMPROVE PRODUCTIVITY
ENSURE QUALITY
• Easy-to-learn, easy-to-use system controls
reduce operator training and increase productivity
• Digital controls, diagnostics and automatic
shutdown features prevent crossovers
• Digital heat control allows for simple operator
set-up without readjustments
• Data reporting provides valuable information for
validating job accuracy while differentiating yourself
from the competition!
MAXIMIZE SPRAY TIME
• Minimize maintenance time and costs
while maximizing spray time
12
RECEIVE THE BEST VALUE
FOR YOUR MONEY
• Fusion gun has fewer parts, is easy to
clean and is proven the most dependable
gun in the business
• Only plural component proportioner on the
market with an electric DC motor, direct drive.
• Quick knock down fluid sections in the Reactor
streamlines maintenance and service
• Achieve higher yields with Reactor proportioner
and Fusion Mix Chamber technology
• Fusion gun pays for itself in 3 months or less!
Ordering Information
REACTOR FOR FOAM
ELECTRIC PROPORTIONERS
E-20
AIR PROPORTIONERS
A-25
Maximum pressure . . . . . . . . . . . . . . . . . . . . . . . . 2000 psi (138 bar, 13.8 MPa)
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 lbs/min (8 kg/min)
Heater output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6,000 watts
Maximum hose length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 ft (64 m)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 lbs (154 kg)
Ordering information
Package† Bare
248718
246025 . . . . . . . . . . . . . 230 volt single phase, 48 full load amps
248720 246034 . . . . . . . . . . . . . . 230 volt three phase, 32 full load amps
248719
246030 . . . 380 volt three phase with neutral, 24 full load amps
Maximum pressure . . . . . . . . . . . . . . . . . . . . . . . . 2000 psi (138 bar, 13.8 MPa)
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 lbs/min (11 kg/min)
Heater output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10,200 watts
Maximum hose length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 ft (94 m)
Maximum air pressure . . . . . . . . . . . . . . . . . . . . . . . 125 psi (8.6 bar, 0.86 MPa)
Maximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 cfm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 lbs (180 kg)
Ordering information
Package† Bare
248724 246037 . . . . . . . . . . . . . 230 volt single phase, 44 full load amps
248726 246750 . . . . . . . . . . . . . . 230 volt three phase, 27 full load amps
248725 246751 . . . 380 volt three phase with neutral, 18 full load amps
E-30
Maximum pressure . . . . . . . . . . . . . . . . . . . . . . . . 2000 psi (138 bar, 13.8 MPa)
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 lbs/min (15 kg/min)
Heater output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10,200 watts
Maximum hose length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 ft (94 m)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 lbs (181 kg)
Ordering information
Package† Bare
248721 246026 . . . . . . . . . . . . . 230 volt single phase, 78 full load amps
248723 246035 . . . . . . . . . . . . . . 230 volt three phase, 50 full load amps
248722 246031 . . . 380 volt three phase with neutral, 34 full load amps
E-30 – 15kw
248733 248657 . . . . . . . . . . . . 230 volt single phase, 100 full load amps
248735 248658 . . . . . . . . . . . . . . 230 volt three phase, 62 full load amps
248734 248659 . . . 380 volt three phase with neutral, 35 full load amps
A-50
Maximum pressure . . . . . . . . . . . . . . . . . . . . . . . . 2000 psi (138 bar, 13.8 MPa)
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 lbs/min (22 kg/min)
Heater output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15,300 watts
Maximum hose length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 ft (94 m)
Maximum air pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 75 psi (5 bar, 0.5 MPa)
Maximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 cfm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480 lbs (216 kg)
Ordering information
Package† Bare
248727 246038 . . . . . . . . . . . . . 230 volt single phase, 84 full load amps
248729 246754 . . . . . . . . . . . . . . 230 volt three phase, 57 full load amps
248728 246755 . . . 380 volt three phase with neutral, 43 full load amps
HYDRAULIC PROPORTIONERS
H-50
H-50 | 246756
Maximum pressure . . . . . . . . . . . . . . . . . . . . . . . . 2000 psi (138 bar, 13.8 MPa)
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 lbs/min (22 kg/min)
Heater output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15,300 watts
Maximum hose length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 ft (94 m)
Hydraulic power requirements . . . . . . . . . . . . . . . . . . . . . . 1200 psi @10 gpm*
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475 lbs (214 kg)
Ordering information
Package*† Bare*
248730 246039 . . . . . . . . . . . . . 230 volt single phase, 84 full load amps
248732 246756 . . . . . . . . . . . . . . 230 volt three phase, 57 full load amps
248731 246757 . . . 380 volt three phase with neutral, 33 full load amps
* Requires Hydraulic Power Pack 118430, 230 volt, 3 phase, 18 full load amps.
Manual 307550.
†
Packages include Reactor, 50 ft (15 m) heated hose with scuffguard, 10 ft (3 m)
whip hose with scuffguard and Fusion Air Purge Gun.
MANUALS
E-20 | 246025
Electric Reactors
Operation . . . . . . . . . . . . . . . . . . . . . . . . . 309551
Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309574
Air and Hydraulic Reactors
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 309812
Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309813
A-25 | 246037
1
13
Ordering Information
REACTOR FOR POLYUREA
ELECTRIC PROPORTIONERS
E-XP1
HYDRAULIC PROPORTIONERS
H-XP3
Maximum pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2500 (172 bar, 17.2 MPa)
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0 gpm (3.8 lpm)
Heater output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10,200 watts
Maximum hose length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 ft (64 m)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 342 lbs (155 kg)
Ordering information
Package† Bare
248706 246024 . . . . . . . . . . . . . 230 volt single phase, 69 full load amps
248708 246033 . . . . . . . . . . . . . . 230 volt three phase, 43 full load amps
248707 246029 . . . . . . . . . . . . . . . . . . 380 volt three phase with neutral,
24 full load amps
Maximum pressure . . . . . . . . . . . . . . . . . . . . . . . . 3000 psi (207 bar, 20.7 MPa)
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 gpm (11.4 lpm)
Heater output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15,300 watts
Maximum hose length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 ft (94 m)
Hydraulic power requirements . . . . . . . . . . . . . . . . . . . . . . 1200 psi @10 gpm*
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485 lbs (218 kg)
Ordering information
Package*† Bare*
248715
246040 . . . . . . . . . . . . . 230 volt single phase, 84 full load amps
248717
246758 . . . . . . . . . . . . . . 230 volt three phase, 57 full load amps
248716
246759 . . . . 380 volt three phase with neutral, 33 full load amps
*Requires Hydraulic Power Pack 118430, 230 volt, 3 phase, 18 full load amps.
Manual 307550.
E-XP2
Maximum pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 3500 (241 bar, 24.1 MPa)
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 gpm (7.6 lpm)
Heater output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15,300 watts
Maximum hose length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 ft (94 m)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438 lbs (199 kg)
Ordering information
Package† Bare
248709 246028 . . . . . . . . . . . . 230 volt single phase, 100 full load amps
248711
246036 . . . . . . . . . . . . . . 230 volt three phase, 62 full load amps
248710
246032 . . . . . . . . . . . . . . . . . . 380 volt three phase with neutral,
35 full load amps
AIR PROPORTIONERS
A-XP2
Maximum pressure . . . . . . . . . . . . . . . . . . . . . . . . 3000 psi (207 bar, 20.7 MPa)
Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 gpm (5.6 lpm)
Heater output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10,200 watts
Maximum hose length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 ft (94 m)
Maximum air pressure . . . . . . . . . . . . . . . . . . . . . . . 120 psi (8.3 bar, 0.83 MPa)
Maximum air consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 cfm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 lbs (180 kg)
Ordering information
Package† Bare
248712
246639 . . . . . . . . . . . . . 230 volt single phase, 63 full load amps
248714
246752 . . . . . . . . . . . . . . 230 volt three phase, 40 full load amps
248713
246753 . . . . . . . . . . . . . . . . . . 380 volt three phase with neutral,
22 full load amps
REACTOR 2:1 AIR
248635
248636
248637
REACTOR SPECIALITY PACKAGES
Includes the following: One agitator, air distribution manifold, air and fluid hoses,
50 ft by 3/8 in HP heated hose with scuff jacket, 10 ft heated whip with scuff
jacket, Fusion AP gun. Does not include drum supply pumps.
234984
246641
247165
247166
REACTOR ACCESSORIES
118430
193200
234983
246085
246086
246362
248669
15B593
15B742
15B805
248122
248123
248061
248062
248063
†
A-XP2 2:1, 10.2 KW heaters, 230 V, 1 phase, President air motor,
(3) lowers, 222019.
A-XP2 2:1, 10.2 KW heaters, 230 V, 3 phase, President air motor,
(3) lowers, 220019
A-XP2 2:1, 10.2 KW heaters, 380 V, 3 phase, President air motor,
(3) lowers, 222019
1
E-XP2, 15.3 KW heaters, 230 V, 3 phase, (Fusion, 246101)
E-XP1, 10.2 KW heaters, 230 V, 3 phase, (Fusion, 246100)
E-XP1, 10.2 KW heaters, 230 V, 1 phase, (Fusion, 246100)
E-XP2, 15.3 KW heaters, 230 V, 1 phase, (Fusion, 246101)
Hydraulic Power Supply, 1200 psi (83 bar, 8.3 MPa), 10 gpm (38 lpm)
with 30 gal (114 l) reservoir; includes all supply and return plumbing,
230 volt, 3 phase, 18 full load amps
Gauge Peel-offs, 0-5000 psi (345 bar, 34.5 MPa)
Air Manifold Kit, mounts on Reactor frame, has main air regulator,
includes ports for drum pumps, agitator, gun air
Electric data reporting kit
Air and hydraulic data reporting kit
Connects to Fusion gun manifold and allows for quick preheat of hose
and material. Does not include circulation lines
Reactor Conversion Kit, converts E-XP2 to E-30 with 15 KW heaters
Smart Mix display peel-off protectors
50 ft (15 m) extension cable for Smart Mix control panel
Trailer mounting bracket for Reactor
Conversion Kit, 1 Phase to 3 Phase
Conversion Kit, 3 Phase to 1 Phase
ISO Pump flush kit for E20 and EXP1
ISO Pump flush kit for EXP2
ISO Pump flush kit for E-30
Packages include Reactor, 50 ft (15 m) heated hose with scuffguard,
10 ft (3 m) whip hose with scuffguard and Fusion Air Purge Gun.
H-XP3 | 246040
MANUALS
Electric Reactors
Operation . . . . . . . . . . . . . . . . . . . . . . . . . 309551
Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309574
Air and Hydraulic Reactors
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 309812
Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309813
14
E-XP2 | 246028
Ordering Information
HEATED HOSES
HOSES, 2000 PSI (138 BAR)
HOSE ACCESSORIES
246045
246046
246047
246048
246049
246074
246075
246076
246678
246050
246051
246077
246078
246456
246805
248921
1/4 in x 50 ft (6.3 mm x 15 m)
3/8 in x 50 ft (9.5 mm x 15 m)
1/2 in x 50 ft (12.7 mm x 15 m)
1/4 in x 25 ft (6.3 mm x 7.6 m)
3/8 in x 25 ft (9.5 mm x 7.6 m)
1/4 in x 50 ft (6.3 mm x 15 m), no thermocouple wire
3/8 in x 50 ft (9.5 mm x 15 m), no thermocouple wire
1/2 in x 50 ft (12.7 mm x 15 m), no thermocouple wire
3/8 in x 50 ft (9.5 mm x 15 m), with scuffguard™
1/4 in x 10 ft (6.3 mm x 3 m)
3/8 in x 10 ft (9.5 mm x 3 m)
15B296
15C517
15C626
246079
15F028
10 ft (3 m) braided polyester mesh scuffguard
50 ft (15 m) braided polyester mesh scuffguard
50 ft (15 m) polyethylene scuffguard
25 ft (7.6 m) braided polyester mesh scuffguard
Heated Hose Controller, 2700 watt, allows Reactor heated hose
extended past 300 ft (91 m) requires 200-240 volts at 15 amps
50 ft (15 m) FTS cable
Heated hose jumper (required when not using heated whip)
25 ft (7.6 m) Fluid Temperature Sensor (FTS) cable
Fluid temperature sensor
Band heater, 1000 watt, for 55 gallon drum, 230 volt
HOSES, 3500 PSI (241 BAR)
REACTOR HEATER MODULE
246052
246053
246054
246679
246055
246056
246364
246365
246607
246760
246761
246762
246763
246764
246765
1/4 in x 50 ft (6.3 mm x 15 m)
3/8 in x 50 ft (9.5 mm x 15 m)
1/2 in x 50 ft (12.7 mm x 15 m)
3/8 in x 50 ft (9.5 mm x 15 m), with scuffguard
1/4 in x 10 ft (6.3 mm x 3 m), with scuffguard
3/8 in x 10 ft (9.5 mm x 3 m), with scuffguard
HOSES, 5000 PSI (345 BAR)
248908
248907
Quickset Hose set, heated, 3/8 in by 3/8 in x 50 ft, insulated with
protective wrap
Quickset Hose set, heated, 3/8 in by 1/4 x 50 ft, insulated with
protective wrap. For ratios other than 1:1 or materials with wide
viscosity differences
15,300 watt, 230 volt single phase
6,000 watt, 230 volt single phase
10,200 watt, 230 volt single phase
6,000 watt, 230 volt three phase
6,000 watt, 380 volt three phase with neutral
10,200 watt, 230 volt three phase
10,200 watt, 380 volt three phase with neutral
15,300 watt, 230 volt three phase
15,300 watt, 380 volt three phase with neutral
MANUALS
Hoses
Operation . . . . . . . . . . . . . . . . . . . . 309572
Reactor Heater Module
Operation . . . . . . . . . . . . . . . . . . . . 309812
Repair . . . . . . . . . . . . . . . . . . . . . . . 309813
AIR–PURGE GUNS
2
TECHNICAL SPECIFICATIONS
Maximum working fluid pressure . . . . . . . . . . . . . 3500 psi (24.1 MPa, 241 bar)
Minimum working air pressure . . . . . . . . . . . . . . . . . 80 psi (0.56 MPa, 5.6 bar)
Maximum working air inlet pressure . . . . . . . . . . . . . . 130 psi (0.9 MPa, 9 bar)
Maximum fluid temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200º F (94º C)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 lb (1.13 kg)
Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt quick disconnect nipple
A Component (ISO) inlet size . . . . . . . . . . . . . . . . . . . -5 JIC; 1/2-20 UNF swivel
B Component (Resin) inlet size . . . . . . . . . . . . . . . . . -6 JIC; 9/16-18 UNF swivel
Wetted parts . . . . . . . . . . . . . . . aluminum, stainless steel, plated carbon steel,
carbide, brass, chemically resistant o-rings
Gun dimensions . . . . . . . . 7.6 in (191 mm) x 8 in (206 mm) x 3.3 in (84 mm)
Air flow range at 100 psi
(0.7 MPa, 7 bar) pressure static . . . . . . . . . 0.9 - 8.8 scfm (.03 - .25 m3/min)
Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309550
246101
3
15
Ordering Information
AIR–PURGE GUNS, CONTINUED
FUSION AIR-PURGE GUNS, ROUND
FUSION AIR-PURGE TIPS, FLAT
246099
246100
246101
246102
246103
246104
246105
248617
FT0424
FT0438
FT0624
FT0638
FT0838
FT0848
AR2020 (000) mix chamber (0.020 orifice size)
AR2929 (00) mix chamber (0.029 orifice size)
AR4242 (01) mix chamber (0.042 orifice size)
AR5252 (02) mix chamber (0.052 orifice size)
AR6060 (03) mix chamber (0.060 orifice size)
AR7070 (04) mix chamber (0.070 orifice size)
AR8686 (05) mix chamber (0.086 orifice size)
AR3737 mix chamber, sized between AR2929 and AR4242
FUSION AIR-PURGE MIX CHAMBERS, ROUND
AR2020
AR2929
AR3737
AR4242
AR5252
AR6060
AR7070
AR8686
(000) mix chamber with clean out drill bits, (0.020 orifice size)
(00) mix chamber with clean out drill bits, (0.029 orifice size)
Mix chamber with clean out drill bits, (between 0.029 and
0.042 orifice size)
(01) mix chamber with clean out drill bits, (0.042 orifice size)
(02) mix chamber with clean out drill bits, (0.052 orifice size)
(03) mix chamber with clean out drill bits, (0.060 orifice size)
(04) mix chamber with clean out drill bits, (0.070 orifice size)
(05) mix chamber with clean out drill bits, (0.086 orifice size)
FUSION AIR-PURGE MIX CHAMBERS, WIDE ROUND
AW2828
AW3333
AW3939
AW4646
AW5757
AW6464
AW8282
50% wider pattern, compares to AR2929
50% wider pattern, compares to AR3737
50% wider pattern, compares to AR4242
50% wider pattern, compares to AR5252
50% wider pattern, compares to AR6060
50% wider pattern, compares to AR7070
50% wider pattern, compares to AR8686
FUSION AIR-PURGE GUN, FLAT
247101
247102
247107
247108
247111
247112
247117
247118
247121
247122
247127
247128
247131
247132
247137
247138
AF2020 mix chamber with FT0424 flat tip
AF2020 mix chamber with FT0438 flat tip
AF2020 mix chamber with FT0838 flat tip
AF2020 mix chamber with FT0848 flat tip
AF2929 mix chamber with FT0424 flat tip
AF2929 mix chamber with FT0438 flat tip
AF2929 mix chamber with FT0838 flat tip
AF2929 mix chamber with FT0848 flat tip
AF4242 mix chamber with FT0424 flat tip
AF4242 mix chamber with FT0438 flat tip
AF4242 mix chamber with FT0838 flat tip
AF4242 mix chamber with FT0848 flat tip
AF5252 mix chamber with FT0424 flat tip
AF5252 mix chamber with FT0438 flat tip
AF5252 mix chamber with FT0838 flat tip
AF5252 mix chamber with FT0848 flat tip
FUSION AIR-PURGE PARTS AND ACCESSORIES
118665
117773
248279
248280
246012
246347
246348
246349
246350
246351
246352
246731
248129
248133
246354
246355
246356
246357
246358
246359
246360
246361
246491
248130
248132
15B210
15B801
244914
248528
113379
117509
117510
117661
119386
246944
FUSION AIR-PURGE MIX CHAMBERS, FLAT
AF2020
AF2929
AF4242
AF5252
(000) mix chamber with clean out drill bits, o-ring
(00) mix chamber with clean out drill bits, o-ring
(01) mix chamber with clean out drill bits, o-ring
(02) mix chamber with clean out drill bits, o-ring
246945
248139
248229
15B772
15B817
15D546
248408
248414
248415
16
Low fluid flow, 8 to 10 in tip pattern
Medium fluid flow, 8 to 10 in pattern
Low fluid flow, 12 to 14 in tip pattern
Med fluid flow, 12 to 14 in tip pattern
Medium fluid flow, 16 to 18 in pattern
High fluid flow, 16 to 18 in pattern
Fusion lube, for lubricating threads, o-rings, components
Fusion grease - specially formulated isocyanate compatible lighter
viscosity grease used in port on Air Purge Gun for daily maintenance
Fusion lube, 10 pack, for lubricating threads, o-rings, components
Fusion grease, 10 pack, specially formulated isocyanate compatible
lighter viscosity grease used in port on Air Purge Gun for daily
maintenance
Fluid manifold assembly
Side seal o-ring kit, includes (6) o-rings for both cartridges
Side seal kit, includes (2) side seals with o-rings
A (ISO) cartridge assembly, A-side cartridge, seal and o-rings
B (Poly) cartridge assembly, B-side cartridge, seal and o-rings
Check valve seal repair kit
Check valve assembly, B (Poly)
Check valve assembly, A (ISO)
Check valve o-ring, radial, bulk
Check valve o-ring, face, bulk
O-ring, clean off air, bulk
Gun seal repair kit, includes all necessary o-rings for the entire
gun assembly
Fluid manifold valve repair kit
Gun filter, 40 mesh
Gun filter, 60 mesh
Gun filter, 80 mesh
Flat tip sealing o-ring kit, pack of 3
Quick change front half spray head kit, includes entire spray head
assembly less mix chamber. Order mix chamber separately
Fluid housing, bare
Side seal housing o-ring kit, bulk
O-ring, fluid housing, bulk
Air cap, round pattern, for Fusion Air Purge Gun
Air cap, rlat pattern, for Fusion Air Purge Gun
Air-Purge gun cover kit, pack of 10
Fusion Air Purge pour adapter kit
Ball-valve for air hose
1/4 npt male quick disconnect, air
1/4 npt female quick disconnect, air
Pin vise, double-ended pin vise, with reversible chucks,
to hold cleanout drill bits from 0-1/8 in
Drill bit kit, 20 piece, #61 - #81
Manifold conversion kit; converts Graco manifold to fit a
competitor gun. Graco manifold 246012 not included.
Manifold conversion kit; converts competitor manifold to
fit a Graco fusion gun
Solvent flush kit, pressurized container for solvent flushing
gun before service
5 gallon Fusion Gun flush system
1/8 in (3.18 mm) air hose, 18” (.46 m) long, use to attach
gun to whip hose
Gun flush manifold block
Fusion gun cleaning kit
Adhesive/spatter gun for fleeceback roofing systems
Adhesive/spatter kit, converts Fusion Air Purge to adhesive/spatter gun
Tip for adhesvise/spatter gun
3
Ordering Information
MECHANICAL–PURGE GUNS
TECHNICAL SPECIFICATIONS
Maximum working fluid pressure . . . . . . . . . . . . . 3500 psi (24.1 MPa, 241 bar)
Minimum working air pressure . . . . . . . . . . . . . . . . . 80 psi (0.56 MPa, 5.6 bar)
Maximum working air inlet pressure . . . . . . . . . . . . . . 130 psi (0.9 MPa, 9 bar)
Maximum fluid temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200º F (94º C)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.9 lbs (1.32 kg)
Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt quick disconnect nipple
A Component (ISO) inlet size . . . . . . . . . . . . . . . . . . . -5 JIC; 1/2-20 UNF swivel
B Component (Resin) inlet size . . . . . . . . . . . . . . . . . -6 JIC; 9/16-18 UNF swivel
Wetted parts . . . . . . . . . . . . . . . aluminum, stainless steel, plated carbon steel,
polycarballoy, carbide, brass,
chemically resistant o-rings
Gun dimensions . . . . . . . . 7.5 in (191 mm) x 8.3 in (703 mm) x 3.1 in (79 mm)
Air flow range at 100 psi
(0.7 MPa, 7 bar) pressure static . . . . . . . . . 0.9 - 8.8 scfm (.03 - .25 m3/min)
Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309856
247012
FUSION MECHANICAL-PURGE GUNS, DI FLAT
FUSION MECHANICAL-PURGE GUNS, DI ROUND
247050
247051
247057
247058
247065
247066
247067
247073
247074
247075
247081
247082
247083
247089
247090
247091
247006
247007
247011
247012
247013
247018
247019
247025
247026
Fusion MP direct impingement, flat pattern XF1313, FTM317
Fusion MP direct impingement, flat pattern XF1313, FTM424
Fusion MP direct impingement, flat pattern XF1818, FTM317
Fusion MP direct impingement, flat pattern XF1818, FTM424
Fusion MP direct impingement, flat pattern XF2929, FTM424
Fusion MP direct impingement, flat pattern XF2929, FTM438
Fusion MP direct impingement, flat pattern XF2929, FTM624
Fusion MP direct impingement, flat pattern XF3535, FTM438
Fusion MP direct impingement, flat pattern XF3535, FTM624
Fusion MP direct impingement, flat pattern XF3535, FTM638
Fusion MP direct impingement, flat pattern XF4747, FTM624
Fusion MP direct impingement, flat pattern XF4747, FTM638
Fusion MP direct impingement, flat pattern XF4747, FTM838
Fusion MP direct impingement, flat pattern XF5757, FTM638
Fusion MP direct impingement, flat pattern XF5757, FTM838
Fusion MP direct impingement, flat pattern XF5757, FTM848
FUSION MECHANICAL-PURGE GUNS, FLAT
247257
247258
247265
247266
247267
247273
247274
247275
247281
247282
247283
247289
247290
247291
Fusion MP standard, flat pattern MF1818, FTM317
Fusion MP standard, flat pattern MF1818, FTM424
Fusion MP standard, flat pattern MF2929, FTM424
Fusion MP standard, flat pattern MF2929, FTM438
Fusion MP standard, flat pattern MF2929, FTM624
Fusion MP standard, flat pattern MF3535, FTM438
Fusion MP standard, flat pattern MF3535, FTM624
Fusion MP standard, flat pattern MF3535, FTM638
Fusion MP standard, flat pattern MF4747, FTM624
Fusion MP standard, flat pattern MF4747, FTM638
Fusion MP standard, flat pattern MF4747, FTM838
Fusion MP standard, flat pattern MF5757, FTM638
Fusion MP standard, flat pattern MF5757, FTM838
Fusion MP standard, flat pattern MF5757, FTM848
Fusion MP direct impingement, round pattern XR2929, RTM030
Fusion MP direct impingement, round pattern XR2929, RTM040
Fusion MP direct impingement, round pattern XR3535, RTM030
Fusion MP direct impingement, round pattern XR3535, RTM040
Fusion MP direct impingement, round pattern XR3535, RTM055
Fusion MP direct impingement, round pattern XR4747, RTM040
Fusion MP direct impingement, round pattern XR4747, RTM055
Fusion MP direct impingement, round pattern XR5757, RTM055
Fusion MP direct impingement, round pattern XR5757, RTM070
FUSION MECHANICAL-PURGE GUNS, ROUND
247211
247212
247213
247218
247219
247225
247226
247231
247232
247233
247239
247240
247245
247246
Fusion MP standard, round pattern MR3535, RTM030
Fusion MP standard, round pattern MR3535, RTM040
Fusion MP standard, round pattern MR3535, RTM055
Fusion MP standard, round pattern MR4747, RTM040
Fusion MP standard, round pattern MR4747, RTM055
Fusion MP standard, round pattern MR5757, RTM055
Fusion MP standard, round pattern MR5757, RTM070
Fusion MP standard, round pattern MR6666, RTM070
Fusion MP standard, round pattern MR6666, RTM080
Fusion MP standard, round pattern MR6666, RTM090
Fusion MP standard, round pattern MR8282, RTM090
Fusion MP standard, round pattern MR8282, RTM100
Fusion MP standard, round pattern MR9494, RTM100
Fusion MP standard, round pattern MR9494, RTM110
3
17
Ordering Information
MECHANICAL–PURGE GUNS, CONTINUED
FUSION MECHANICAL-PURGE MIX
MF1818
MF2929
MF3535
MF4747
MF5757
MR3535
MR4747
MR5757
MR6666
MR8282
MR9494
XF1313
XF1818
XF2323
XF2929
XF3535
XF4747
XF5757
XR2323
XR2929
XR3535
XR4747
XR5757
Standard mix module, flat
Standard mix module, flat
Standard mix module, flat
Standard mix module, flat
Standard mix module, flat
Standard mix module, round
Standard mix module, round
Standard mix module, round
Standard mix module, round
Standard mix module, round
Standard mix module, round
Direct impingement mix module, flat
Direct impingement mix module, flat
Direct impingement mix module, flat
Direct impingement mix module, flat
Direct impingement mix module, flat
Direct impingement mix module, flat
Direct impingement mix module, flat
Direct impingement mix module, flat
Direct impingement mix module, round
Direct impingement mix module, round
Direct impingement mix module, round
Direct impingement mix module, round
MECHANICAL-PURGE ACCESSORIES
FUSION MECHANICAL-PURGE ROUND TIPS
RTM024
RTM030
RTM040
RTM055
RTM070
RTM080
RTM090
RTM100
RTM110
Kit, round tip, mechanical-purge
Kit, round tip, mechanical-purge
Kit, round tip, mechanical-purge
Kit, round tip, mechanical-purge
Kit, round tip, mechanical-purge
Kit, round tip, mechanical-purge
Kit, round tip, mechanical-purge
Kit, round tip, mechanical-purge
Kit, round tip, mechanical-purge
FUSION MECHANICAL-PURGE FLAT TIPS
FTM317
FTM424
FTM438
FTM624
FTM638
FTM838
FTM848
Kit, flat tip, mechanical-purge, 6 in (152 mm) pattern, very low flow
Kit, flat tip, mechanical-purge, 8 in (203 mm) pattern, low flow
Kit, flat tip, mechanical-purge, 8 in (203 mm) pattern, medium flow
Kit, flat tip, mechanical-purge, 12 in (305 mm) pattern, low flow
Kit, flat tip, mechanical-purge, 12 in (305 mm) pattern, medium flow
Kit, flat tip, mechanical-purge, 16 in (406 mm) pattern, medium flow
Kit, flat tip, mechanical-purge, 16 in (406 mm) pattern, high flow
FUSION MECHANICAL-PURGE ACCESSORIES
244915
248603
248642
248682
15D546
18
Mechanical-Purge gun cover kit, pack of 10
Converts Fusion MP gun to Solvent Purge
Static mixer assembly for Solvent Purge Gun, 3 in (76 mm)
Fusion Mechanical pour adapter kit
Fusion gun cleaning kit
FUSION MECHANICAL-PURGE PARTS
248000
248001
248002
248003
Kit, complete o-ring, Fusion MP
Kit, purge rod
Gun handle, mechanical purge
Kit, front/rear packing 4 pack
FUSION MECHANICAL-PURGE PARTS, DRILLS
246626
246630
246807
246808
246809
246810
246811
246812
246813
246814
246815
246816
246817
Kit, clean-out drill, use with round tip RTM070
Kit, clean-out drill, use with module 2929
Kit, clean-out drill, use with modules, 1313, 1818, 4747, 5757, 6666,
and tip RTM030
Kit, clean-out drill, use with module 8282, and round tip RTM040
Kit, clean-out drill, use with round tip RTM055
Kit, clean-out drill, use with round tip RTM110
Kit, clean-out drill, use with round tip RTM080
Kit, clean-out drill, use with round tip RTM090
Kit, clean-out drill, use with round tip RTM100
Kit, clean-out drill, use with module 9494
Kit, clean-out drill, use with module 3535, and round tip RTM024
Kit, clean-out drill, use with module 1818
Kit, clean-out drill, use with module 1313
FUSION SPECIALITY GUNS
248408
248597
Fusion AP spatter/adhesive manual gun. Manual 309550.
Manual Fusion solvent purge gun. Manual 310648.
AUTOMATIC FUSION
248376
248377
248378
248379
248380
248381
248382
248383
248384
248385
248386
248387
248647
Automatic Fusion AP, round, AR2929, requires 4 way solenoids
Automatic Fusion AP, round, AR4242, requires 4 way solenoids
Automatic Fusion AP, round, AR5252, requires 4 way solenoids
Automatic Fusion AP, round, AR6060, requires 4 way solenoids
Automatic Fusion AP, flat, AF2020, FT0424, requires 4 way solenoids
Automatic Fusion AP, flat, AF2929, FT0438, requires 4 way solenoids
Automatic Fusion MP, round, direct impingement, XR2929, RTM040,
requires 4 way solenoids
Automatic Fusion MP, round, direct impingement, XR3535, RTM040,
requires 4 way solenoids
Automatic Fusion MP, flat, direct impingement, XF1313, FTM317,
requires 4 way solenoids
Automatic Fusion MP, flat, direct impingement, XF1818, FTM424,
requires 4 way solenoids
Automatic Fusion MP, round, MR3535, RTM040, requires 4 way
solenoids
Automatic Fusion MP, round, MR5757, RTM0702, requires 4 way
solenoids
Auto Fusion - Solvent Purge, requires 4 way solenoids.
Manual 310648.
3
Ordering Information
SUPPLY PUMPS AND AGITATORS
COMPLETE SUPPLY PUMP SYSTEMS (2 PUMP)
Includes the following: All air and fluid fittings, hoses for 2 pumps.
246655
Complete TRITON 308 (246677) supply pump system
246369
Complete Husky 515 (246481) supply pump system
246375
Complete Husky 716 (246482) supply pump system
246376
Complete Husky 1040 (246676) supply pump system
246081
Complete 2:1 standard (246898) supply pump system
SUPPLY PUMPS WITH DRUM RISER TUBE
246654
246366
246367
246368
226040
248825
TRITON 308 diaphragm pump, aluminum, 3/8 in fluid outlet, 115 psi
max air inlet, 2.0 gpm @ 60 cpm, 1.7 cfm per gpm
Husky™ 515 diaphragm pump, Acetal bolted design, 100 psi max air
inlet, 7.5 gpm @ 60 cpm, 3 cfm per gpm
Husky 716 diaphragm pump, aluminum clamped design, 100 psi max
air inlet, 7.5 gpm @ 60 cpm, 3 cfm per gpm
Husky 1040 diaphragm pump For Trailer Mounts - aluminum, bolted,
Wall Mount, 120 psi max air inlet, 7.5 gpm @ 60 cpm, 1 cfm per gpm
2:1 standard piston pump For higher viscosity materials - 360 psi max
fluid psi, 1.5 gpm @ 60 cpm, 3 cfm @1 gpm
5:1 Monark drum pump, For High viscosity materials, 900 psi max
fluid psi, 10 ft (3 m) hose, 3/4 npt (m), air regulator, manual 310863
Husky 716
DOUBLE SUPPLY PUMPS WITH FLUID PLUMBING
246677
246481
246482
246676
246898
TRITON 308 (246654), 10 ft x 3/4 in (3 m x 19 mm) supply hose
Husky 515 (246366), 10 ft x 3/4 in (3 m x 19 mm) supply hose
Husky 716 (246367), 10 ft x 3/4 in (3 m x 19 mm) supply hose
Husky 1040 (246368), 10 ft x 3/4 in (3 m x 19 mm) supply hose,
6 ft x 3/4 in (1.8 m x 19 mm) suction hose
2:1 standard piston pump (226040), 10 ft x 3/4 in (3 m x 19 mm)
supply hose
Husky 1040
SUPPLY PUMP ACCESSORIES
246419
246477
246483
246640
246978
15C381
55 gal (208 l) feed pump tube with inlet ball check
3/4 in (19 mm) bung return tube with air dryer port
Air distribution kit, 120 psi (8.4 bar, 0.84 MPa) for two feed pumps
and a Fusion gun
Desiccant dryer kit
Reactor manifold circulation kit with return tubes, return fluid
lines and dryers
Desiccant replacement
AGITATOR
224854
235534
236629
248824
2:1 Standard
Twistork® CS, air-operated, 1-1/2 HP, 37.3 in (0.9 m) length
Twistork SST, air-operated, 1-1/2 HP, 37.3 in (0.9 m) length
Twistork SST, air-operated with built-in return tube, 3/4 HP,
47.5 in (1.2 m) in length
Twistork CS, air-operated (224854), 1-1/2 HP, 37.3 in (0.9 m) with air
connection, hose
MANUALS
Supply Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309815
Air Supply Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309827
Circulation and return tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309852
4
Twistork Agitator
19
REACTOR & FUSION
ABOUT GRACO
P R O V E N Q U A L I T Y. L E A D I N G T E C H N O LO G Y.
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle
lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco
offers systems, products and technology which set the quality standard in a wide range of fluid handling
solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,
and dispensing sealants and adhesives, along with power application equipment for the contractor
industry. Graco’s ongoing investment in fluid management and control will continue to provide
innovative solutions to a diverse global market.
GRACO HEADQUARTERS
AMERICAS
EUROPE
ASIA PACIFIC
MINNESOTA
Worldwide Headquarters
Graco Inc.
88-11th Avenue N.E.
Minneapolis, MN 55413
BELGIUM
European Headquarters
Graco N.V.
Industrieterrein - Oude Bunders
Slakweidestraat 31
3630 Maasmechelen, Belgium
Tel 32 89 770 700
Fax 32 89 770 777
JAPAN
Graco K.K.
1-27-12 Hayabuchi
Tsuzuki-ku
Yokohama City, Japan 2240025
Tel 81 45 593 7300
Fax 81 45 593 7301
MAILING ADDRESS
P.O. Box 1441
Minneapolis, MN 55440-1441
Tel 612 623-6000
Fax 612 623-6777
CHINA
Graco Hong Kong Ltd.
Representative Office
Room 118 1st Floor
No. 2 Xin Yuan Building
No. 509 Cao Bao Road
Shanghai, P.R.China 200233
Tel 86 21 649 50088
Fax 86 21 649 50077
KOREA
Graco Korea Inc.
Choheung Bank Building,
4th Floor #1599,
Gwanyang-Dong, Dongan-Ku,
Anyang-Si, Gyunggi-Do,
Korea 431-060
Tel 82-31-476-9400
Fax 82-31-476-9801
Call today for product information or to request a demonstration.
1.877.84GRACO (1-877-844-7226) or visit us at www.graco.com.
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
Graco Inc. is registered to I.S. EN ISO 9001
Sales/Distribution/Service North America
Industrial Customer Service
800-328-0211
FAX 877-340-6427
Contractor Customer Service
800-690-2894
FAX 800-334-6955
GRACO INC.
P.O. Box 1441
Minneapolis, MN 55440-1441
©2002-2005 Graco Inc. Form No. 300615 Rev. C 1/05 Printed in U.S.A.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising