Segway® RMP 400 Specifications Robotics The Segway RMP 400 is our most powerful robotics platform. Powered by four lithium-ion battery packs and rolling on four ATV tires, the Segway RMP 400 is a workhorse capable of moving quickly over challenging terrain for long distances. RMP 400 TOP SPEED RANGE 18 mph (29 km/h) 26.4 ft/s (8.1 m/s) 12-15 mi (19-24 km) TRACK WIDTH 24.5 in (62 cm) TIRE DIAMETER 21 in (53 cm) FOOTPRINT TURNING RADIUS TURNING ENVELOPE 30 x 44 in (76 x 112 cm) zero degrees (load dependent) 50 in (127 cm) TOTAL WEIGHT 240 lbs (109 kg) DRIVE BATTERIES Four Li-Ion Packs MAX. RUN TIME ~8 hrs MAX. PAYLOAD 400 lbs (181 kg) RECHARGE TIME* ~8 hrs (from empty) CONTROL MODE 4WD Tractor Mode Data Update Rate 100 Hz Operating TEMP. RANGE 14°F to 122°F (-10°C to 50°C) * Built-in charger accepts 100-240 VAC, 50-60 Hz. PAYLOAD POWER OPTION The Segway RMP 400 Payload Power option provides a simple solution for powering devices such as sensors, embedded PCs, a laptop PC, or even some manipulators. Power is converted from a standard Segway RMP battery pack allowing for independent 12 VDC and 72 VDC channels for payload power. This integrated system is enclosed within an environmentally sealed enclosure that bridges the two power bases and provides easy access to all user interface control buttons. Further enhancements include the ability to charge the payload battery and power base batteries via onboard chargers through a single charge port. • Output is switched allowing for independent control of payload and RMP platform • Low voltage sensor produces an audible alarm to warn of low voltage • The standard output connection delivers 12 VDC to an environmentally sealed connector through the enclosure cover Visit http://rmp.segway.com/rmp-400 to learn more and see how RMP 400s are being used for robotics research and development. To request a quote go to http://rmp.segway.com or email email@example.com © 2012 Segway Inc. All rights reserved.