How do I switch on my SuperTooth D4? Press and hold the Multifunction Button for 3 seconds. A power on beep is heard in the speaker. How do I switch off my SuperTooth D4 ? Press and hold the Multifunction Button for 3 seconds. A power on beep is heard in the speaker and it switches off. How do I pair my SuperTooth D4 with my Bluetooth phone / device ? Important: Make sure that your phone / device supports Bluetooth A2DP (Advanced Audio Distribution Profile) before proceeding. 1. Press and hold the Multifuction Button until the Indicator blinks red and blue. The SUPERTOOTH D4 is ready to be paired. 2. While the SUPERTOOTH D4 is in pairing mode, access the Bluetooth menu of your phone/iPad/laptop. Turn on its Bluetooth function then execute a Bluetooth search to find the SUPERTOOTH D4. 3. When your phone displays the list of Bluetooth devices, select ST DISCO 4. 4. If your phone asks for a password / pin code, enter 0000 and press OK. 5. The SUPERTOOTH D4 beeps. It is ready to use with your device. NFC* pairing. How do I pair my SuperTooth D4 with my Bluetooth phone / device ? 1. Turn “ON” the D4. Enable NFC on your phone. 2. Place and maintain your NFC supported phone on top of the speaker. 3. The speaker will go to pairing mode (a pairing beep will be heard on the speaker and the LED Indicator will turn red / blue alternately) and your phone will prompt for pairing connection. 4. Follow the pairing prompts on your phone until pairing is finished. You may now remove your phone from the speaker. 5. Pairing is successful if the LED Indicator blinks blue every 3 seconds. 6. The D4 is now ready to use with your phone. (*) Please make sure your phone supports NFC to pair it this way with the D4. If it doesn’t, please refer to Standard pairing section below. For further information please visit : http://nfc-forum.org/ How to reset the SuperTooth D4? While the SuperTooth D4 is in pairing mode, press twice on the Multifunction Button.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project