Tranquility 20 Catalog.indd

Tranquility 20 Catalog.indd
Unit Specifications
Vertical and Horizontal Single-Stage, HFC 410A EarthPure™ Systems
Tranquility 20™ TS Series
Geothermal Heating
and Cooling System
Sizes 018-070
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
TRANQUILITY 20
SERIES
™
™
Residential Single-Stage
Geothermal Heat Pumps
Specifications Catalog
Revision: 03/24/05
Table of Contents
Geothermal System Types ...............................2
Design Features ..............................................3
ARI Performance Certification .......................6
Unit Model Key ...............................................9
Reference Calculations & Legend ..................9
Performance Data.........................................10
Dimensions....................................................26
Electrical & Physical Data ...........................29
PSC Blower Performance Data ....................30
ECM Control Features & Operation ............31
Geothermal Advantages
Geothermal systems transfer heat from a building to the earth
in the cooling mode, or from the earth to the building in the
heating mode. Water is used as the heat transfer medium,
either in a closed loop piping system, or by directly pumping
well water. By using this stable thermal source, geothermal
heat pumps provide energy efficient comfort the year around.
Highest Efficiency
The extremely high levels of efficiency are possible because a
geothermal heat pump only uses electricity to move heat, not
produce it. A Tranquility 20 Series unit typically supplies 4
kilowatts of heat for every kilowatt of electricity used. Three
of these kilowatts of heat come directly from the earth itself,
and are clean, free and renewable. Most systems also include
a hot water generator, which diverts a portion of the supplied
heat to the domestic water heater. This provides a substantial
portion of a familyʼs hot water needs at a very low cost.
Overall, geothermal technology offers the highest cooling
EERʼs and heating COPʼs available in the industry.
Maximum Comfort
Geothermal heat pumps also provide higher comfort than
traditional space conditioning equipment. By using a relatively
warm source of heat such as the earth, supply air temperatures
are significantly higher in the heating mode than traditional
air-source heat pumps. Geothermal heat pumps also cycle
much less often than fossil furnaces, creating a more consistent
indoor temperature.
Geothermal heat pumps provide this comfort and economy in
a single factory-tested and sealed packaged unit, without the
need for field evacuation or charging, a noisy outdoor fan, or
a flue.
Environmentally Friendly
The environmental advantages of geothermal systems have caught
the eye of governmental agencies such as the Environmental
Protection Agency (EPA) and the Department of Energy (DOE).
Because it is lowest in CO2 emissions, geothermal technology
provides a solution to global warming by primarily using
the natural energy of the earth. In contrast, traditional space
conditioning systems depend upon the exploitation and burning
of fossil energy sources with the resultant greenhouse gas
emissions. Also, EarthPure HFC 410A refrigerant is used in the
factory sealed unit for minium global warming impact and zero
ozone depletion.
Better Investment
Low life-cycle costs are provided by the low operating
and maintenance costs of geothermal systems, even when
the higher initial installation costs are considered. In new
construction, monthly energy savings typically exceed the
increased mortgage payments. Therefore, cash flow is positive
from the start. In retrofit systems, a buyer who purchases
with cash usually realizes a return on investment well above
certificate of deposit rates. And, with equipment life exceeding
20 years, a ClimateMaster Tranquility 20 Series unit is a
lasting investment.
Electric utilities, recognizing the dual benefits of high
efficiency and low electric peak demand, often provide
incentives to purchase these systems.
™
™
ECM Blower Performance Data ...................31
Thermostat Features & Wiring .....................32
CXM Features ...............................................33
ECM Electrical Wiring Diagram ..................35
PSC Electrical Wiring Diagram ...................36
Auxiliary Heater Data...................................37
Engineering Guide Specs ..............................38
Accessories & Options ..................................39
Warranty Information ...................................39
™
Guide Revision Log .......................................39
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 1
Geothermal System Types
Before choosing a geothermal system, many application
factors must be evaluated including:
• Ground water availability and quality
• Loop installation costs
• Land area available
• Subsoil conditions
• Local codes
• Owner preferences
ClimateMaster dealers have the expertise and computer
software to determine the best type of system. Many regions
have contractors specializing in the installation of the
ground loop portion of the system.
Closed Loop Systems
Closed Loop Systems consist of an underground heat
exchange network of sealed, high strength polyethylene
plastic pipe and a Flow Controller pumping module. When
cooling, the loop fluid temperature will rise, and rejected
heat is dissipated into the cooler earth.
Conversely, while heating, the loop fluid temperatures fall,
and heat is absorbed from the earth. ClimateMaster Flow
Controller pumping modules utilize small wattage pumps to
circulate the water/antifreeze fluid within the piping system.
The plastic heat exchange loop is closed and thermally
fusion-welded at all connections in the same manner as
natural gas distribution lines. Closed loops do not require
a ground water supply or drain, and they are not subject to
mineral build up.
Closed Loops can be installed in vertical or horizontal
configurations, or submerged in a pond or lake. When
designed properly, all three alternatives operate with
similar efficiency. ClimateMaster high density polyethylene
plastic pipe is used for all closed loop installations. Pipe
connections are heat fused to form joints that are stronger
than the pipe itself. ClimateMaster loop piping has a life
expectancy in excess of 50 years.
Horizontal Loops are often considered when adequate
land space is available. The pipes are placed in trenches,
excavated by a backhoe or chain trencher to a depth
of 4-6 feet. Depending on design, from 1-6 pipes are
installed in each trench. Multiple pipe and coiled “slinky”
configurations are often used to conserve land requirements
and reduce overall installed loop costs. Horizontal boring
Horizontal Closed Loop
Page 2
technology can also be used to install u-bend loops 10-15
feet deep with minimal landscaping disruption. Trench
lengths range from 100-400 feet per system ton. Trenches
must be spaced from 6-10 feet apart. The overall land area
required ranges from 750-1,500 square feet per system ton.
Vertical Loops are the ideal choice when available land area
is limited. Drilling equipment is used to bore small-diameter
vertical holes. Two pipes joined together with a u-bend fitting
are inserted into the vertical bore. Bore hole depth ranges
from 100-300 feet per system ton. Bores must be spaced
from 10-15 feet apart and properly grouted. The land space
required ranges from 100-200 square feet per system ton.
Pond (Lake) Loops are very economical to install when a
body of surface water is available, because excavation costs
are virtually eliminated. Coils or "slinky" mats of pipe are
simply placed on the bottom of the pond (lake). In most
cases, 1/4 to 1/2 acre of water surface, with a minimum
depth of 8-10 feet, is needed for a typical residence.
Ground Water Systems
Open loop systems utilize ground water as a direct energy
source when good quality water is available at a reasonable
pumping depth. A well must have enough capacity to
deliver a minimum of 1.5 gpm per system ton during peak
operation. Ditches, field tiles, ponds and streams are the
most common discharge systems. Reinjection or semiclosed recirculation wells can also be utilized in some
regions. In ideal conditions, an open loop application can be
the most economical type of system to install.
Vertical Closed Loop
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Ground Water
What's New with ClimateMaster's Tranquility 20™?
EarthPure™ Refrigerant
EarthPure™ is a non-chlorine based (HFC 410A)
refrigerant, that with R-407C and R-134A, is seen as the
future of all refrigerants used worldwide.
HFC 410A characteristics compared to
R-22 are:
• Binary and near azeotropic mixture of
50% R-32 and 50% R-125.
• Higher efficiencies (50-60% higher
operating pressures)
• Zero ozone depletion potential and low
global warming potential.
• Virtually no glide. Unlike other alternative
refrigerants, the two components in HFC 410A have
virtually the same leak rates. Therefore, refrigerant can be
added if necessary without recovering the charge.
MERV 11 2” Pleated filter
All Tranquility 20™ units
include a factory installed 2”
filter rack/duct collar with
a 2” pleated high efficiency
MERV 11 air filter. The MERV
(minimum efficiency reporting
value per ASHRAE Standard
52.2) design features ultra low velocity (<300 fpm) for
extended filter life, low pressure drop (0.13 – 0.18 in. wg.)
and high particulate efficiency (size E1=41%, E2=69% and
E3=87%). The pleated design and low velocity combine to
allow the filter to store a large amount of dirt and result in a
practical replacement life of up to 6 months.
ME
RV
11
E-Coated Air Coil
All ClimateMaster Tranquility 20™
Series models feature an e-coated
air-coil. This electro-coating process
will provide years of protection
against corrosion from airborne
chemicals resulting from modern
building material out gassing and
most environmental chemicals
found in the air. Modern building
materials such as counter-tops, floor
coverings, paints and other materials
can “outgas” chemicals into the homeʼs air. Some of these
chemicals are suspected of contributing to corrosion in the
air coils found in both traditional and geothermal heating
and cooling equipment. Corrosion often results in refrigerant
leaks and eventual failure of the air coil costing hundreds
of dollars to replace. Studies have also shown that these
air coil coatings improve moisture shedding and therefore
improve a unitʼs moisture removal capability resulting in a
more comfortable home. The Tranquility 20™ Series is your
assurance of both maximum air coil life and comfort.
The concept of compressing a
gas by turning one involute form
– or “scroll” – against another
around a common axis is nearly a
century old. It wasnʼt until the late
1980s, however that one company
– Copeland – turned theory into
practical reality, using sophisticated,
computer-assisted design and
manufacturing methods to achieve
the critical tolerances required. In the
years since, Copeland has become the
leader in scroll compressor applications, with nine scroll
manufacturing facilities on three continents and millions of
units installed worldwide.
Copeland Scroll® compressors employ two identical,
concentric scrolls, one inserted within the other. One
scroll remains stationary as the other orbits around it. This
movement draws gas into the compression chamber and
moves it through successively smaller “pockets” formed
by the scrollʼs rotation, until it reaches maximum pressure
at the center of the chamber. There, itʼs released through a
discharge port in the fixed scroll. During each orbit, several
pockets are compressed simultaneously, so operation is
virtually continuous.
Recently, Copeland produced its 500,000th Scroll
compressor with the environmentally sound refrigerant
HFC-410A. Field results have shown that HFC-410A units
with Copeland Scroll compressors offer nearly 30% lower
failure rates versus existing R-22 units. HFC-410A units can
reach the industryʼs highest efficiency levels. HFC-410A
scrolls also offer sound advantages to other compressor
technologies, typically operating several decibels quieter
than comparable R-22 models. The result is unsurpassed
reliability and virtually silent operation.
Other New Features
• Stylish two-tone look with textured black powder coat
paint and stainless steel front access panels.
• Liftout handles for front access panels.
• Corrosion and stain resistant stainless steel drain pan with
extra slope designed in.
• Factory mounted filter drier for trouble free reliability.
• Easy access low profile horizontal control box.
• Double isolated compressor for quiet and vibration
free operation.
• Foil faced insulation in air handling compartment to allow
easy cleaning and prevent microfiber introduction into the
air stream.
• Open Service-Friendly Cabinet ( i.e, all components in
compressor section can be serviced from the front).
Copeland Scroll Compressor
Thereʼs a reason 9 out of every 10 scroll compressors
installed are Copeland. With over 15 years of painstaking R
& D and rigid production controls, Copeland is able to build
the most reliable, efficient and quiet scroll compressors in
the world.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 3
Tranquility 20™ Design Features
The Tranquility 20™ Series has abundant features and
industry leading efficiency.
Application Flexibility
• Eight Capacities 018, 024, 030, 036, 042, 048, 060 and 070.
• Extended range operation (20-120°F EWT) and flow rates
as low as 1.5 gpm per ton.
• Vertical packages with either true right or true left return
air options.
• Internally trapped condensate drain.
• Variable speed GE ECM2 fan motor adapts to various
duct systems.
• Internal electric heat unit (optional) designed for easy
field installation.
• Circuit breaker protected loop and hot water generator pumps.
• Field selectable freeze protection setting for well or loop.
• Standard pre-installed 2” filter rack/duct collar with 2”
high performance MERV 11 pleated air filter.*
Operating Efficiencies
• EarthPure™ HFC 410A zero ozone depletion refrigerant.
• Highest efficiencies in ARI/ISO/ASHRAE/ANSI 13256-1
single stage ratings for heating COPʼs, cooling EERʼs with
low water flow rates.
• Multi-speed tap PSC fan or optional ECM variable speed
fan for ultra high efficiencies and unsurpassed comfort.
• Operating temperature range and high efficiency allow
shorter loops.
• Optional hot water generator with internal pump generates
hot water at considerable savings.
• Rugged and highly efficient next generation Copeland
scroll compressors (rotary for size 018) provide the
industryʼs highest efficiencies and capacities.
• Oversized coaxial tube water-to-refrigerant heat
exchangers operate at low liquid pressure drop.
Convoluted copper (and optional cupronickel) water tube
functions efficiently at low-flow rates and provides freezedamage resistance.
• Oversized e-coated, rifled tube/lanced aluminum fin, air to
refrigerant heat exchangers provide high efficiency at low
face velocity.
• Large low RPM blowers with optional variable speed fan motors
provide quiet, efficient air movement with high static capability.
Service Advantages
• Removable panels - 2 or 3 for compressor, 2 for air
handling compartment.
• Low profile control box grants easy access to all
internal components.
• Factory installed liquid line filter/drier.
• Brass swivel-type water connections for quick connection
and elimination of wrenches or sealants during installation.
• Bi-directional thermal expansion valve.
• CXM control features status light with memory for
easy diagnostics.
• Unit Performance Sentinel alerts homeowner of potential
performance issues.
• Circuit breaker protected 75VA control transformer.
• Optional ECM2 motor includes control board with
thermostat signal diagnostic LEDʼs, airflow display LED
(100 CFM per flash), and simplified CFM selection.
• Insulated divider and separate air handling/compressor
compartments permit service testing without air bypass.
• Fan motors have quick attach wiring harness for fast removal.
• Internal dropout blower for easy servicing.
• High and low pressure service ports on refrigerant circuit.
• Accurate refrigerant sensing freeze protection.
Page 4
Factory Quality
• All units are built on our Integrated Process Control
Assembly System (IPCS). The IPCS is a unique state of
the art manufacturing system that is designed to assure
quality of the highest standards of any manufacturer in the
water-source industry. Our IPCS system:
- Verifies that the correct components are being assembled.
- Automatically performs special leak tests on all joints.
- Conducts pressure tests.
- Performs highly detailed run test unparalleled in the
HVAC industry.
- Automatically disables packaging for a “failed” unit.
- Creates computer database for future service analysis
and diagnostics from run test results.
• All units are water run-tested in all modes to insure
efficiency and reliability.
• Heavy gauge galvanized steel cabinets are epoxy powder
coated for durable and long-lasting finish.
• All refrigerant brazing is done in a nitrogen atmosphere.
• All units are deep evacuated to less than 100 microns prior
to refrigerant charging.
• All joints are both helium and halogen leak tested to insure
annual leak rate of less than 1/4 ounce.
• Coaxial heat exchanger, refrigerant suction lines and all
water lines are fully insulated to eliminate condensation
problems in low temperature applications.
• Noise Reduction features include: double isolation
mounted compressors; insulated compressor compartment;
interior cabinet insulation using 1/2” coated glass fiber and
optional variable speed fan.
• Safety features include: high pressure and loss of charge
to protect the compressor; condensate overflow protection;
freeze protection sensors to safeguard the coaxial heat
exchanger and air coil; hot water high-limit and low
compressor discharge temperature switch provided to shut
down the hot water generator when conditions dictate.
Fault lockout enables emergency heat and prevents
compressor operation until thermostat or circuit breaker
has been reset.
Simplified Controls
• CXM solid state control module.
• ʻCFMʼ LED displays airflow (optional ECM motor).
• Dehumidification mode for higher latent cooling (optional
ECM motor).
Options & Accessories
• Optional hot water generator with internally mounted pump.
• Optional cupronickel coaxial heat exchanger.
• Electronic thermostat.
• Closed loop Flow Controller.
• Electronic auto-changeover thermostat with 3-stage heat,
2-stage cool and indicator LEDʼs.
• Hose kits.
* MERV= Minimum Efficiency Reporting Value as
specified by ASHRAE (American Society of Heating,
Refrigerating and Air Conditioning Engineers)
standard 52.2.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Tranquility 20™ Series Heat Pump
Blower Fully
Accessible From the
Service Side Panel
2” Filter Rack with
MERV 11 Pleated
Air Filter
Foil Faced Insulation
in Blower Section.
Fully Insulated
Compressor Section
ME
RV
11
Advanced Unit Controls With
Easy Diagnostics And
Unit Protection Sentinel
Functions
Five Easy, Lift-out Service
Access Panels with Stainless
Steel Front Panels
E-Coated Air Coil
Stainless Steel
Drain Pan
Oversized Water Coil
Brass Swivel
Water Connections
Advanced Copeland
Scroll Compressor
Low Profile Control Box
EarthPure™ HFC 410A Refrigerant
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 5
About ARI/ISO/ASHRAE 13256-1
The performance standard ARI/ASHRAE/ISO 13256-1 became effective January 1, 2000 and replaces ARI Standards 320,
325, and 330. This new standard has three major categories: Water Loop (comparable to ARI 320), Ground Water (ARI 325),
and Ground Loop (ARI 330). Although these standards are similar there are some differences:
Cooling EER unit of measure
The cooling efficiency is measured in EER (US version measured in Btuh per Watt. Metric version measured in Watt per
Watt.) similar to the traditional COP measurement.
Entering Water Conditions Changes
Entering water temperatures have changed to reflect the centigrade temperature scale. For instance the water loop heating test
is performed with 68°F (20°C) water instead of 70°F.
Entering air Conditions Changes
Entering air temperatures have changed to reflect the centigrade temperature scale. For instance the cooling tests are performed with 80.6°F (27°C) dry bulb and 66.2°F (19°C) wet bulb entering air instead of the traditional 80°F DB and 67°F
WB entering air temperatures. 80.6/66.2 data may be converted to 80/67 using the entering air correction table.
Pump Power Correction
Within each model, only one water flow rate is specified for all three groups and pumping Watts are calculated using the following formula. This additional power is added onto the existing power consumption.
• Pump power correction = (gpm x 0.0631) x (Press Drop x 2990) / 300
Where ʻgpmʼ is waterflow in gpm and ʻPress Dropʼ is the pressure drop through the unit heat exchanger at rated water
flow in feet of head.
Fan Power Correction
Fan power is corrected to zero external static pressure using the following equation. The nominal airflow is rated at a specific external static pressure. This effectively reduces the power consumption of the unit and increases cooling capacity but
decreases heating capacity. These Watts are significant enough in most cases to increase EER and COPʼs fairly
dramatically over ARI 320, 325, and 330 ratings.
• Fan Power Correction = (cfm x 0.472) x (esp x 249) / 300
Where ʻcfmʼ is airflow in cfm and esp is the external static pressure at rated airflow in inches of water gauge.
ISO Capacity and Efficiency Equations
The following equations illustrate cooling calculations:
• ISO Cooling Capacity = Cooling Capacity (Btuh) + (Fan Power Correction (Watts) x 3.412)
• ISO EER Efficiency (W/W) = ISO Cooling Capacity (Btuh) x 3.412 /
[Power Input (Watts) - Fan Power Correction (Watts) + Pump Power Correction (Watt)]
The following equations illustrate heating calculations:
• ISO Heating Capacity = Heating Capacity (Btuh) - (Fan Power Correction (Watts) x 3.412)
• ISO COP Efficiency (W/W) = ISO Heating Capacity (Btuh) x 3.412 /
[Power Input (Watts) - Fan Power Correction (Watts) + Pump Power Correction (Watt)]
Test Condition Comparison Table
Cooling
Entering Air -DB/WB °F
Entering Water -°F
Fluid Flow Rate
Heating
Entering Air -°F
Entering Water -°F
Fluid Flow Rate
ARI 320
ISO WLHP
ARI 325
ISO GWHP
ARI 330
ISO GLHP
80/67
85
Note 1
80.6/66.2
86
Note 2
80/67
50/70
Note 2
80.6/66.2
59
Note 2
80/67
77
Note 2
80.6/66.2
77
Note 2
70
70
Note 1
68
68
Note 2
70
50/70
Note 2
68
50
Note 2
70
32
Note 2
68
32
Note 2
Note 1 - Flow rate is set by 10°F rise in standard cooling test
Note 2 - Flow rate is specified by manufacturer
Page 6
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
ARI/ISO/ASHRAE/ANSI 13256-1 Performance
ARI/ISO/ASHRAE 13256-1
English (IP) Units
Water Loop Heat Pump
Model
Fan
Motor
Cooling 86°F
Capacity
Btuh
EER
Btuh/W
Ground Water Heat Pump
Heating 68°F
Capacity
Btuh
COP
Btuh/Btuh
PSC
17,300
16.2
21,400
5.4
ECM
17,700
16.8
21,700
5.9
PSC
25,100
16.2
29,600
4.9
TS*024
ECM
25,000
17.0
30,000
5.3
PSC
28,200
15.3
34,900
5.0
TS*030
ECM
28,600
15.6
35,200
5.3
PSC
33,000
16.6
39,800
5.5
TS*036
ECM
33,100
17.6
39,500
5.8
PSC
37,400
16.0
49,400
5.4
TS*042
ECM
37,800
17.1
48,600
5.7
PSC
47,000
15.3
60,000
5.0
TS*048
ECM
47,600
15.9
59,700
5.2
PSC
61,000
15.9
70,400
5.0
TS*060
ECM
61,000
16.4
70,800
5.2
PSC
67,500
14.4
85,800
5.0
TS*070
ECM
67,000
15.2
84,900
5.0
Cooling capacities based upon 80.6°F DB, 66.2°F WB entering air temperature.
Heating capacities based upon 68°F DB, 59°F WB entering air temperature.
All ratings based upon operation at the lower voltage of dual voltage rated models.
TS*018
Cooling 59°F
Capacity
Model
Water Loop Heat Pump
Heating 20°C
Cooling 30°C
Capacity
EER
Capacity
COP
kW
W/W
kW
W/W
PSC
5.1
4.7
6.3
5.4
TS*018
ECM
5.2
4.9
6.4
5.9
PSC
7.4
4.7
8.7
4.9
TS*024
ECM
7.3
5.0
8.8
5.3
PSC
8.3
4.5
10.2
5.0
TS*030
ECM
8.4
4.6
10.3
5.3
PSC
9.7
4.9
11.7
5.5
TS*036
ECM
9.7
5.2
11.6
5.8
PSC
11.0
4.7
14.5
5.4
TS*042
ECM
11.1
5.0
14.2
5.7
PSC
13.8
4.5
17.6
5.0
TS*048
ECM
14.0
4.7
17.5
5.2
PSC
17.9
4.7
20.6
5.0
TS*060
ECM
17.9
4.8
20.8
5.2
PSC
19.8
4.2
25.1
5.0
TS*070
ECM
19.6
4.5
24.9
5.0
Cooling capacities based upon 27°C DB, 19°C WB entering air temperature.
Heating capacities based upon 20°C DB, 15°C WB entering air temperature.
All ratings based upon operation at the lower voltage of dual voltage rated models.
Capacity
COP
Cooling 77°F
Capacity
EER
Heating 32°F
Capacity
COP
Btuh
Btuh/W
Btuh
Btuh/Btuh
Btuh
Btuh/W
Btuh
Btuh/Btuh
20,200
20,500
28,600
28,100
31,700
32,200
37,300
37,300
42,900
44,200
53,900
54,100
67,000
67,200
77,100
77,000
26.7
28.1
25.7
27.4
22.9
23.9
25.1
26.5
24.3
27.1
23.3
24.6
23.2
24.3
21.6
23.5
17,400
17,500
25,000
25,100
29,400
29,400
32,900
32,900
40,100
39,300
49,000
48,700
58,700
59,100
69,400
69,000
4.6
4.9
4.3
4.6
4.4
4.6
4.8
5.1
4.6
4.9
4.4
4.5
4.5
4.6
4.3
4.4
18,300
18,600
26,300
26,000
29,400
29,800
34,500
34,600
39,300
40,000
49,900
50,100
63,300
64,000
70,800
70,000
19.0
19.8
19.1
20.0
17.6
18.0
19.2
20.2
18.4
20.0
17.6
18.5
18.2
19.0
16.6
17.8
13,400
13,500
19,000
19,400
23,600
23,700
25,700
25,800
31,600
30,400
39,000
38,400
46,500
46,700
54,000
53,900
3.7
4.0
3.7
3.8
3.8
3.9
3.9
4.2
3.8
4.0
3.7
3.8
3.7
3.8
3.6
3.6
Certified in accordance with the ARI/ISO
Standard 13256-1 Certification Program,
which replaced ARI Standard-320,
325, and 330.
ARI/ISO/ASHRAE 13256-1
Metric (SI) Units
Fan
Motor
EER
Ground Loop Heat Pump
Heating 50°F
Ground Water Heat Pump
Cooling 15°C
Heating 10°C
Ground Loop Heat Pump
Cooling 25°C
Heating 0°C
Capacity
EER
Capacity
COP
Capacity
EER
Capacity
COP
kW
5.9
6.0
8.4
8.2
9.3
9.4
10.9
10.9
12.6
13.0
15.8
15.9
19.6
19.7
22.6
22.6
W/W
7.8
8.2
7.5
8.0
6.7
7.0
7.4
7.8
7.1
7.9
6.8
7.2
6.8
7.1
6.3
6.9
kW
5.1
5.1
7.3
7.4
8.6
8.6
9.6
9.6
11.8
11.5
14.4
14.3
17.2
17.3
20.3
20.2
W/W
4.6
4.9
4.3
4.6
4.4
4.6
4.8
5.1
4.6
4.9
4.4
4.5
4.5
4.6
4.3
4.4
kW
5.4
5.5
7.7
7.6
8.6
8.7
10.1
10.1
11.5
11.7
14.6
14.7
18.6
18.8
20.8
20.5
W/W
5.6
5.8
5.6
5.9
5.2
5.3
5.6
5.9
5.4
5.9
5.2
5.4
5.3
5.6
4.9
5.2
kW
3.9
4.0
5.6
5.7
6.9
6.9
7.5
7.6
9.3
8.9
11.4
11.3
13.6
13.7
15.8
15.8
W/W
3.7
4.0
3.7
3.8
3.8
3.9
3.9
4.2
3.8
4.0
3.7
3.8
3.7
3.8
3.6
3.6
Certified in accordance with the ARI/ISO
Standard 13256-1 Certification Program,
which replaced ARI Standard-320,
325, and 330.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 7
Air Flow Correction Factors
Ent Air
WB F
45
50
55
60
65
66.2
67
70
75
Full Load Cooling Corrections 400 CFM per Ton
Sens Clg Cap Multipliers- Entering DB F
Total Clg Cap
0.6650
0.7432
0.8202
0.8960
0.9705
0.9882
1.0000
1.0438
1.1159
60
*
0.9111
0.7709
65
*
*
0.8820
0.6702
70
*
*
1.0192
0.8540
0.6491
0.5939
0.5559
75
*
*
*
1.0473
0.8657
0.8152
0.7801
0.6377
80
*
*
*
*
1.0809
1.0333
1.0000
0.8645
0.6008
80.6
*
*
*
*
1.1066
1.0592
1.0261
0.8913
0.6289
85
*
*
*
*
*
1.2481
1.2158
1.0847
0.8323
90
*
*
*
*
*
*
*
1.2983
1.0578
95
*
*
*
*
*
*
*
*
1.2773
100
*
*
*
*
*
*
*
*
*
Power
0.9860
0.9866
0.9887
0.9924
0.9975
0.9990
1.0000
1.0042
1.0123
Heat of
Rej
0.7268
0.7901
0.8527
0.9146
0.9757
0.9903
1.0000
1.0362
1.0959
* Sensible capacity equals total capacity.
Entering Air Correction Factors
Heating Corrections
Ent Air DB
F
Htg Cap
Power
Heat of
Ext
20
25
30
35
40
45
50
55
60
65
68
70
75
80
1.0782
1.0756
1.0716
1.0661
1.0593
1.0514
1.0426
1.0329
1.0224
1.0114
1.0046
1.0000
0.9883
0.9764
0.6820
0.6871
0.6994
0.7185
0.7438
0.7749
0.8113
0.8525
0.8980
0.9473
0.9786
1.0000
1.0556
1.1135
1.1821
1.1775
1.1692
1.1572
1.1421
1.1240
1.1032
1.0802
1.0551
1.0282
1.0115
1.0000
0.9706
0.9404
Page 8
ECM Airflow
CFM Per
% of
Ton of
Nominal
Clg
240
60.00
275
68.75
300
75.00
325
81.25
350
87.50
375
93.75
400
100.00
425
106.25
450
112.50
475
118.75
500
125.00
520
130.00
PSC Airflow
CFM Per
% of
Ton of
Nominal
Clg
240
60.00
275
68.75
300
75.00
325
81.25
350
87.50
375
93.75
400
100.00
425
106.25
450
112.50
475
118.75
500
125.00
520
130.00
Heating
Htg Cap
Power
0.9518
0.9624
0.9700
0.9775
0.9851
0.9925
1.0000
1.0074
1.0148
1.0222
1.0295
1.0354
1.1724
1.1161
1.0822
1.0536
1.0304
1.0125
1.0000
0.9928
0.9909
0.9622
0.8681
0.8456
Cooling
Heat of
Total Cap Sens Cap
Ext
0.8948
0.9228
0.9410
0.9579
0.9733
0.9874
1.0000
1.0112
1.0210
1.0377
1.0712
1.0844
0.9224
0.9470
0.9619
0.9747
0.9853
0.9938
1.0000
1.0041
1.0060
1.0070
1.0076
1.0083
0.7858
0.8265
0.8593
0.8943
0.9302
0.9659
1.0000
1.0313
1.0584
1.0815
1.0998
1.1110
Heating
Htg Cap
Power
0.9561
0.9668
0.9740
0.9810
0.9876
0.9940
1.0000
1.0057
1.0112
1.0163
1.0211
1.0247
1.1841
1.1282
1.0936
1.0635
1.0379
1.0167
1.0000
0.9878
0.9800
0.9705
0.9614
0.9554
S/T
Power
Heat of
Rej
0.8519
0.8727
0.8933
0.9175
0.9441
0.9719
1.0000
1.0271
1.0522
1.0740
1.0916
1.1018
0.9266
0.9363
0.9455
0.9564
0.9691
0.9837
1.0000
1.0181
1.0381
1.0598
1.0834
1.1035
0.9232
0.9449
0.9587
0.9711
0.9821
0.9918
1.0000
1.0069
1.0123
1.0174
1.0225
1.0271
S/T
Power
Heat of
Rej
0.8298
0.8472
0.8696
0.8981
0.9306
0.9653
1.0000
1.0328
1.0617
1.0848
1.0999
1.1050
0.9542
0.9614
0.9675
0.9744
0.9821
0.9906
1.0000
1.0102
1.0211
1.0329
1.0455
1.0562
0.9309
0.9496
0.9617
0.9728
0.9829
0.9920
1.0000
1.0070
1.0130
1.0180
1.0220
1.0244
Cooling
Heat of
Total Cap Sens Cap
Ext
0.8959
0.9242
0.9425
0.9592
0.9744
0.9880
1.0000
1.0105
1.0194
1.0284
1.0368
1.0430
0.9248
0.9465
0.9602
0.9724
0.9831
0.9923
1.0000
1.0062
1.0109
1.0141
1.0159
1.0161
0.7674
0.8019
0.8350
0.8733
0.9149
0.9578
1.0000
1.0392
1.0733
1.1001
1.1174
1.1229
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Model Key
1 2
3
4 5 6
7
9
8
10 11 12
13
14
15
TS V 0 1 8 A G C 0 0 C L T S
SERIES:
STANDARD:
TS = TRANQUILITY
Single Stage Scroll
S = STANDARD
SUPPLY AIR FLOW & MOTOR OPTION:
CONFIGURATION:
OPTION
T
D
B
S
K
N
P
W
V = VERTICAL UPFLOW
H = HORIZONTAL
D = VERTICAL DOWNFLOW
UNIT SIZE:
018
024
030
036
042
048
060
070
SUPPLY
TOP
DOWN
BACK
STRAIGHT
TOP
DOWN
BACK
STRAIGHT
CONFIGURATION
TSV
TSD
TSH
TSH
TSV
TSD
TSH
TSH
MOTOR
PSC
PSC
PSC
PSC
ECM
ECM
ECM
ECM
RETURN AIR:
L = LEFT RETURN
R = RIGHT RETURN
REVISION LEVEL:
A = CURRENT REVISION
HEAT EXCHANGER OPTIONS:
A = COPPER WATER COIL, E-COATED AIR COIL
J = CUPRO-NICKEL WATER COIL, E-COATED AIR COIL
VOLTAGE:
G = 208-230/60/1
CONTROLS:
C = CXM
HOT WATER GENERATOR OPTIONS:
0 = NONE
1 = HWG W/INTERNAL PUMP
CABINET:
0 = RESIDENTIAL CLASS
Reference Calculations & Legend
Heating
HE
LWT = EWT GPM x 500
LAT = EAT +
CFM
EWT
GPM
EAT
HC
TC
SC
KW
HR
HE
HWC
=
=
=
=
=
=
=
=
=
=
=
HC
CFM x1.08
Cooling
HR
LWT = EWT +
GPM x 500
LAT (DB) = EAT (DB) -
airflow, cubic feet/minute
entering water temperature, ˚F
water flow in US gallons/minute
entering air temperature, Fahrenheit (dry bulb/wet bulb)
air heating capacity, Mbtuh
total cooling capacity, Mbtuh
sensible cooling capacity, Mbtuh
total power unit input, KiloWatts
total heat of rejection, Mbtuh
total heat of extraction, Mbtuh
Hot Water Generator (desuperheater) capacity, Mbtuh
LC = TC - SC
SC
CFM x1.08
S/T =
SC
TC
WPD = Water coil pressure drop (psi & ft hd)
EER = Energy Efficiency Ratio
= BTU output/Watt input
COP = Coefficient of Performance
= BTU output/BTU input
LWT = leaving water temperature, °F
LAT = leaving air temperature, °F
LC = latent cooling capacity, Mbtuh
S/T = sensible to total cooling ratio
Piping End
Piping End
Left Return Air
Piping End
Left Return Air
Back Discharge
Piping End
Left Return Air
Side Discharge
Right Return Air
Piping End
Piping End
Right Return Air
Back Discharge
Left Return Air
Piping End
Right Return Air
Side Discharge
Piping End
Right Return Air
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 9
Performance Data — Tranquility 20™ Model 018 - PSC Motor
600 CFM Nomimal (Rated) Airflow Cooling, 600 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
EWT °F
GPM
Airflow
TC
SC
kW
PSI
FT
CFM
2.8
0.8
1.8
4.1
2.4
5.5
5.5
3.9
9.0
2.8
0.7
1.6
4.1
2.1
4.9
5.5
3.5
8.1
2.8
0.6
1.4
4.1
2.0
4.6
5.5
3.2
7.4
2.8
0.5
1.2
4.1
1.7
3.9
5.5
2.8
6.5
2.8
0.3
0.7
4.1
1.5
3.5
5.5
2.6
6.0
2.8
0.3
0.7
4.1
1.4
3.2
5.5
2.4
5.5
2.8
0.2
0.5
4.1
1.2
2.8
5.5
2.2
5.1
2.8
0.2
0.5
4.1
1.2
2.7
5.5
2.1
4.9
2.8
0.2
0.5
4.1
1.1
2.5
5.5
2.0
4.6
2.8
0.2
0.5
4.1
1.1
2.5
5.5
1.9
4.4
2.8
0.1
0.2
4.1
0.9
2.1
5.5
1.7
3.9
2.8
0.1
0.2
4.1
0.8
1.8
5.5
1.6
3.7
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
450
600
11.5
11.8
1.31
1.20
7.3
7.8
93.7
88.3
2.57
2.89
1.8
19.8
20.6
20.0
20.8
20.2
21.0
11.3
13.5
11.3
13.5
11.3
13.6
0.74
0.76
0.71
0.73
0.70
0.73
22.3
23.2
22.4
23.3
22.6
23.5
26.9
27.1
28.1
28.3
28.8
29.0
-
450
600
450
600
450
600
12.8
13.1
13.2
13.6
13.5
13.8
1.34
1.23
1.35
1.23
1.35
1.24
8.5
9.0
8.9
9.4
9.1
9.7
96.3
90.3
97.2
91.0
97.7
91.3
2.80
3.14
2.87
3.23
2.92
3.27
2.1
450
600
450
600
450
600
20.3
21.1
20.4
21.3
20.6
21.5
11.7
14.0
11.7
14.0
11.8
14.1
0.80
0.82
0.76
0.79
0.75
0.77
23.0
23.9
23.0
24.0
23.1
24.1
25.5
25.7
26.8
27.0
27.6
27.8
-
450
600
450
600
450
600
14.7
15.1
15.3
15.7
15.6
16.0
1.38
1.26
1.39
1.27
1.39
1.27
10.2
10.9
10.8
11.4
11.0
11.7
100.3
93.4
101.5
94.2
102.1
94.7
3.14
3.52
3.23
3.63
3.29
3.69
2.4
450
600
450
600
450
600
19.9
20.7
20.3
21.1
20.4
21.3
11.7
14.0
11.8
14.2
11.8
14.2
0.89
0.92
0.84
0.87
0.82
0.84
22.9
23.8
23.1
24.1
23.2
24.1
22.3
22.4
24.1
24.3
25.0
25.2
1.4
1.5
1.3
1.4
1.3
1.3
450
600
450
600
450
600
16.8
17.2
17.5
18.0
17.9
18.3
1.41
1.29
1.42
1.30
1.43
1.30
12.1
12.9
12.8
13.5
13.1
13.9
104.6
96.6
106.0
97.7
106.8
98.3
3.49
3.92
3.61
4.05
3.67
4.12
2.6
450
600
450
600
450
600
19.0
19.8
19.5
20.3
19.8
20.6
11.4
13.7
11.6
13.9
11.7
14.0
1.00
1.03
0.94
0.97
0.91
0.94
22.4
23.3
22.7
23.6
22.9
23.8
19.1
19.2
20.9
21.0
21.8
22.0
1.7
1.8
1.6
1.6
1.5
1.5
450
600
450
600
450
600
18.9
19.4
19.7
20.3
20.2
20.7
1.44
1.32
1.45
1.33
1.46
1.33
14.1
14.9
14.8
15.7
15.2
16.2
108.9
100.0
110.6
101.3
111.5
102.0
3.84
4.32
3.98
4.47
4.05
4.55
2.8
450
600
450
600
450
600
17.8
18.6
18.5
19.3
18.8
19.6
11.0
13.2
11.3
13.5
11.4
13.6
1.11
1.15
1.05
1.08
1.01
1.05
21.6
22.5
22.1
22.9
22.3
23.1
16.1
16.2
17.7
17.8
18.5
18.7
2.0
2.1
1.9
2.0
1.8
1.8
450
600
450
600
450
600
21.0
21.6
22.0
22.5
22.5
23.1
1.47
1.34
1.48
1.36
1.49
1.36
16.0
17.0
16.9
17.9
17.3
18.4
113.3
103.3
115.2
104.8
116.2
105.6
4.19
4.71
4.34
4.87
4.42
4.96
3.1
450
600
450
600
450
600
450
600
450
600
450
600
16.6
17.3
17.3
18.0
17.6
18.3
10.6
12.7
10.8
13.0
10.9
13.1
1.23
1.27
1.16
1.20
1.13
1.17
20.8
21.6
21.2
22.1
21.5
22.3
18.0
19.1
18.9
20.0
19.4
20.5
20.4
21.2
24.1
24.8
1.51
1.38
18.9
20.0
16.6
17.3
10.6
12.7
1.23
1.27
20.8
21.6
25.1
25.8
1.52
1.39
19.8
21.0
17.0
17.7
10.7
12.8
1.20
1.24
21.0
21.9
25.6
26.3
1.53
1.40
20.3
21.5
117.6
106.6
119.6
108.2
120.7
109.0
119.6
108.2
121.7
109.8
122.8
110.6
4.52
5.08
4.68
5.25
4.76
5.34
4.68
5.25
4.83
5.43
4.91
5.52
3.3
1.29
1.34
450
600
450
600
450
600
450
600
450
600
450
600
1.50
1.37
1.51
1.38
1.52
1.39
10.4
12.5
2.5
2.6
2.3
2.4
2.1
2.2
2.7
2.8
2.5
2.6
2.3
2.4
23.1
23.7
24.1
24.8
24.6
25.3
16.0
16.6
13.5
13.6
14.8
14.9
15.6
15.7
12.3
12.4
13.5
13.6
14.2
14.3
450
600
450
600
450
600
15.3
16.0
16.0
16.6
16.3
17.0
10.2
12.2
10.4
12.5
10.5
12.6
1.36
1.40
1.29
1.33
1.26
1.30
20.0
20.8
20.4
21.2
20.6
21.4
11.3
11.4
12.4
12.5
13.0
13.1
3.0
3.1
2.8
2.9
2.6
2.7
450
600
450
600
450
600
25.1
25.8
26.1
26.8
26.6
27.4
1.52
1.39
1.54
1.40
1.54
1.41
19.8
21.0
20.7
22.0
21.2
22.5
121.7
109.8
123.8
111.4
124.8
112.2
4.83
5.43
4.99
5.60
5.06
5.68
3.5
450
600
450
600
450
600
14.1
14.7
14.7
15.3
15.0
15.6
9.9
11.8
10.0
12.0
10.1
12.1
1.48
1.53
1.42
1.47
1.39
1.44
19.2
19.9
19.5
20.3
19.7
20.5
9.5
9.6
10.3
10.4
10.8
10.9
3.5
3.7
3.3
3.4
3.0
3.2
450
600
450
600
450
600
13.1
13.6
13.5
14.1
13.8
14.4
9.7
11.6
9.7
11.7
9.8
11.7
1.61
1.66
1.55
1.60
1.52
1.57
18.6
19.3
18.8
19.6
19.0
19.7
8.1
8.2
8.7
8.8
9.1
9.1
4.2
4.4
3.9
4.1
3.6
3.8
450
600
450
600
450
600
12.3
12.8
12.6
13.1
12.8
13.3
9.7
11.7
9.7
11.6
9.7
11.6
1.73
1.79
1.68
1.73
1.65
1.70
18.2
18.9
18.3
19.0
18.4
19.1
7.1
7.1
7.5
7.6
7.8
7.8
5.0
5.2
4.6
4.8
4.2
4.4
1.8
2.1
1.8
2.1
1.8
2.0
2.3
2.0
2.3
2.0
2.2
2.6
2.2
2.6
2.2
2.4
2.8
2.4
2.8
2.4
2.6
3.1
2.6
3.1
2.6
2.8
3.3
2.8
3.3
2.8
3.4
2.9
3.4
2.9
3.4
2.9
3.0
3.5
3.0
3.5
3.0
Operation not recommended
Interpolation is permissable; extrapolation is not.
Rev.: 03/16/05D
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Page 10
1.6
450
600
450
600
450
600
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Performance Data — Tranquility 20™ Model 018 - ECM Motor
700 CFM Nomimal (Rated) Airflow Cooling, 700 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
EWT °F
GPM
Airflow
TC
SC
kW
PSI
FT
CFM
2.8
0.8
1.8
4.1
2.4
5.5
5.5
3.9
9.0
2.8
0.7
1.6
4.1
2.1
4.9
5.5
3.5
8.1
2.8
0.6
1.4
4.1
2.0
4.6
5.5
3.2
7.4
2.8
0.5
1.2
4.1
1.7
3.9
5.5
2.8
6.5
2.8
0.3
0.7
4.1
1.5
3.5
5.5
2.6
6.0
2.8
0.3
0.7
4.1
1.4
3.2
5.5
2.4
5.5
2.8
0.2
0.5
4.1
1.2
2.8
5.5
2.2
5.1
2.8
0.2
0.5
4.1
1.2
2.7
5.5
2.1
4.9
2.8
0.2
0.5
4.1
1.1
2.5
5.5
2.0
4.6
2.8
0.2
0.5
4.1
1.1
2.5
5.5
1.9
4.4
2.8
0.1
0.2
4.1
0.9
2.1
5.5
1.7
3.9
2.8
0.1
0.2
4.1
0.8
1.8
5.5
1.6
3.7
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
530
700
11.7
12.0
1.24
1.14
7.7
8.2
90.4
85.9
2.77
3.09
1.8
1.6
530
700
530
700
530
700
20.0
20.8
20.3
21.1
20.5
21.3
12.4
14.4
12.4
14.4
12.4
14.4
0.66
0.70
0.64
0.68
0.63
0.67
22.2
23.2
22.4
23.4
22.6
23.6
30.3
29.8
31.7
31.1
32.3
31.8
-
530
700
530
700
530
700
12.9
13.3
13.4
13.8
13.6
14.0
1.26
1.16
1.26
1.17
1.27
1.17
8.8
9.4
9.2
9.8
9.5
10.1
92.5
87.6
93.3
88.2
93.8
88.5
3.01
3.36
3.10
3.45
3.14
3.51
2.1
530
700
530
700
530
700
20.7
21.6
21.1
21.9
21.2
22.1
13.2
15.4
13.2
15.4
13.3
15.4
0.73
0.77
0.69
0.73
0.67
0.71
23.2
24.2
23.4
24.4
23.5
24.5
28.5
28.0
30.7
30.1
31.6
31.1
-
530
700
530
700
530
700
14.8
15.3
15.4
15.9
15.8
16.2
1.28
1.19
1.29
1.19
1.30
1.20
10.6
11.3
11.2
11.9
11.5
12.2
95.9
90.2
97.0
91.0
97.5
91.5
3.39
3.78
3.50
3.91
3.56
3.98
2.3
530
700
530
700
530
700
20.7
21.5
21.1
21.9
21.2
22.0
13.6
15.8
13.6
15.8
13.6
15.8
0.82
0.86
0.76
0.81
0.74
0.78
23.4
24.4
23.6
24.6
23.7
24.7
25.3
24.9
27.6
27.1
28.7
28.2
1.5
1.5
1.4
1.4
1.3
1.3
530
700
530
700
530
700
16.9
17.5
17.7
18.2
18.1
18.6
1.31
1.21
1.32
1.22
1.32
1.22
12.6
13.3
13.2
14.1
13.6
14.5
99.6
93.1
100.9
94.1
101.6
94.7
3.79
4.22
3.93
4.38
4.00
4.47
2.6
530
700
530
700
530
700
19.8
20.5
20.3
21.2
20.6
21.4
13.3
15.4
13.5
15.7
13.5
15.7
0.92
0.97
0.86
0.91
0.83
0.88
22.9
23.9
23.2
24.2
23.4
24.4
21.5
21.1
23.7
23.3
24.9
24.4
1.7
1.8
1.6
1.7
1.5
1.6
530
700
530
700
530
700
19.1
19.7
20.0
20.6
20.5
21.1
1.34
1.23
1.34
1.24
1.35
1.25
14.6
15.5
15.4
16.4
15.8
16.8
103.4
96.1
104.9
97.3
105.7
97.9
4.19
4.68
4.36
4.86
4.44
4.96
2.8
530
700
530
700
530
700
18.6
19.3
19.3
20.0
19.6
20.4
12.8
14.9
13.1
15.2
13.2
15.4
1.03
1.09
0.97
1.02
0.94
0.99
22.1
23.0
22.5
23.5
22.8
23.7
18.0
17.7
19.9
19.6
21.0
20.6
2.1
2.2
2.0
2.0
1.8
1.9
530
700
530
700
530
700
21.3
22.0
22.3
23.0
22.8
23.5
1.36
1.25
1.37
1.26
1.37
1.27
16.6
17.7
17.5
18.6
18.0
19.2
107.2
99.0
108.9
100.4
109.9
101.1
4.60
5.13
4.78
5.33
4.87
5.44
3.0
530
700
530
700
530
700
17.3
17.9
18.0
18.7
18.4
19.1
12.3
14.3
12.6
14.6
12.7
14.8
1.15
1.22
1.09
1.15
1.05
1.11
21.2
22.1
21.7
22.6
21.9
22.9
15.0
14.7
16.5
16.3
17.4
17.1
2.5
2.6
2.4
2.5
2.2
2.3
530
700
530
700
530
700
23.4
24.2
24.5
25.2
25.0
25.8
1.38
1.27
1.39
1.28
1.39
1.28
18.6
19.8
19.6
20.8
20.1
21.4
110.9
102.0
112.8
103.4
113.7
104.1
4.99
5.56
5.18
5.78
5.28
5.89
3.3
530
700
530
700
530
700
16.6
17.2
17.3
18.0
17.7
18.4
12.0
14.0
12.3
14.3
12.4
14.5
1.22
1.29
1.15
1.22
1.12
1.18
20.7
21.6
21.2
22.1
21.5
22.4
13.6
13.4
15.0
14.8
15.8
15.5
2.8
2.9
2.6
2.7
2.4
2.5
530
700
530
700
530
700
24.4
25.2
25.5
26.3
26.0
26.8
1.39
1.28
1.39
1.29
1.40
1.29
19.6
20.8
20.6
21.9
21.1
22.4
112.7
103.3
114.5
104.8
115.5
105.5
5.17
5.77
5.37
5.99
5.47
6.10
3.4
530
700
530
700
530
700
15.9
16.5
16.6
17.3
17.0
17.6
11.8
13.7
12.0
14.0
12.2
14.2
1.28
1.35
1.21
1.28
1.18
1.25
20.3
21.2
20.8
21.6
21.0
21.9
12.5
12.2
13.7
13.5
14.4
14.1
3.1
3.2
2.8
3.0
2.6
2.7
530
700
530
700
530
700
25.5
26.2
26.5
27.3
27.0
27.9
1.39
1.29
1.40
1.29
1.40
1.30
20.5
21.8
21.5
22.9
22.0
23.4
114.5
104.7
116.3
106.1
117.2
106.9
5.36
5.98
5.55
6.19
5.65
6.31
3.5
530
700
530
700
530
700
14.7
15.3
15.3
15.9
15.6
16.2
11.4
13.2
11.5
13.4
11.7
13.6
1.40
1.48
1.34
1.42
1.31
1.38
19.5
20.3
19.9
20.7
20.1
21.0
10.5
10.3
11.4
11.2
11.9
11.7
3.7
3.8
3.4
3.5
3.1
3.3
530
700
530
700
530
700
13.6
11.1
1.52
18.9
14.2
14.1
14.7
14.4
14.9
13.0
11.2
13.0
11.3
13.1
1.61
1.47
1.55
1.44
1.52
19.7
19.1
20.0
19.3
20.1
9.0
8.8
9.6
9.4
10.0
9.8
4.5
4.0
4.2
3.7
3.9
530
700
530
700
530
700
13.0
10.8
1.64
18.6
13.5
13.2
13.8
13.4
13.9
12.6
11.0
12.8
11.2
13.0
1.73
1.59
1.68
1.56
1.65
19.4
18.7
19.5
18.8
19.6
7.9
7.8
8.3
8.2
8.6
8.4
5.3
4.7
4.9
4.4
4.6
1.8
2.1
1.8
2.1
1.8
2.0
2.3
2.0
2.3
2.0
2.2
2.6
2.2
2.6
2.2
2.4
2.8
2.4
2.8
2.4
2.6
3.0
2.6
3.0
2.6
2.8
3.3
2.8
3.3
2.8
2.9
3.4
2.9
3.4
2.9
3.0
3.5
3.0
3.5
3.0
4.3
Operation not recommended
5.1
Interpolation is permissable; extrapolation is not.
Rev.: 03/16/05D
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 11
Performance Data — Tranquility 20™ Model 024 - PSC Motor
850 CFM Nomimal (Rated) Airflow Cooling, 850 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
EWT °F
GPM
Airflow
TC
SC
kW
PSI
FT
CFM
4.0
1.6
3.7
6.0
3.5
8.1
8.0
5.6
12.9
4.0
1.5
3.5
6.0
3.1
7.2
8.0
5.1
11.8
4.0
1.3
3.0
6.0
2.8
6.5
8.0
4.5
10.4
4.0
1.3
3.0
6.0
2.6
6.0
8.0
4.3
9.9
4.0
1.2
2.8
6.0
2.5
5.8
8.0
4.0
9.2
4.0
1.1
2.5
6.0
2.3
5.3
8.0
3.8
8.8
4.0
1.0
2.3
6.0
2.2
5.1
8.0
3.5
8.1
4.0
1.0
2.3
6.0
2.2
5.0
8.0
3.5
8.0
4.0
1.0
2.3
6.0
2.1
4.9
8.0
3.4
7.9
4.0
1.0
2.3
6.0
2.0
4.6
8.0
3.2
7.4
4.0
0.9
2.1
6.0
1.9
4.4
8.0
3.1
7.2
4.0
0.9
2.1
6.0
1.8
4.2
8.0
3.0
6.9
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
640
850
16.3
16.8
1.80
1.65
10.6
11.2
93.6
88.3
2.66
2.99
2.1
27.9
29.1
28.0
29.2
28.1
29.3
15.6
18.7
15.6
18.7
15.7
18.8
0.94
0.97
0.90
0.93
0.88
0.91
31.1
32.4
31.1
32.4
31.1
32.4
29.8
30.0
31.1
31.3
31.8
32.1
-
640
850
640
850
640
850
18.5
19.0
19.2
19.7
19.5
20.0
1.83
1.68
1.84
1.68
1.85
1.69
12.5
13.3
13.2
14.0
13.5
14.3
96.7
90.7
97.7
91.4
98.3
91.8
2.95
3.32
3.05
3.42
3.10
3.48
2.5
640
850
640
850
640
850
27.8
29.0
28.0
29.2
28.2
29.3
15.8
18.9
15.8
18.9
15.8
18.9
1.04
1.07
0.99
1.02
0.96
0.99
31.3
32.6
31.4
32.6
31.4
32.7
26.9
27.1
28.5
28.7
29.3
29.5
-
640
850
640
850
640
850
21.4
22.0
22.2
22.8
22.6
23.3
1.87
1.71
1.89
1.72
1.89
1.73
15.2
16.1
16.0
17.0
16.4
17.4
100.9
93.9
102.1
94.8
102.8
95.3
3.34
3.75
3.45
3.87
3.51
3.94
2.8
640
850
640
850
640
850
27.6
28.7
27.8
29.0
27.9
29.1
15.9
19.0
15.9
19.1
15.9
19.1
1.15
1.18
1.08
1.12
1.06
1.09
31.5
32.7
31.5
32.8
31.5
32.8
24.1
24.3
25.7
25.9
26.5
26.7
1.6
1.7
1.5
1.5
1.4
1.4
640
850
640
850
640
850
24.2
24.9
25.2
25.9
25.7
26.4
1.92
1.75
1.93
1.76
1.94
1.77
17.8
18.9
18.7
19.9
19.2
20.3
105.1
97.1
106.4
98.2
107.2
98.7
3.71
4.16
3.82
4.29
3.89
4.36
3.1
640
850
640
850
640
850
26.9
28.0
27.3
28.4
27.5
28.6
15.9
19.1
15.9
19.1
15.9
19.1
1.27
1.32
1.20
1.24
1.17
1.21
31.2
32.5
31.4
32.6
31.4
32.7
21.1
21.3
22.7
22.9
23.5
23.7
1.9
2.0
1.8
1.8
1.6
1.7
640
850
640
850
640
850
27.0
27.7
28.1
28.8
28.6
29.4
1.96
1.79
1.97
1.80
1.98
1.81
20.4
21.7
21.4
22.7
21.9
23.2
109.1
100.2
110.6
101.4
111.4
102.0
4.05
4.54
4.17
4.68
4.23
4.75
3.4
640
850
640
850
640
850
26.0
27.0
26.5
27.6
26.7
27.8
15.8
18.9
15.9
19.0
15.9
19.0
1.42
1.47
1.34
1.39
1.30
1.35
30.8
32.0
31.1
32.3
31.2
32.4
18.2
18.4
19.8
19.9
20.5
20.7
2.3
2.4
2.1
2.2
2.0
2.0
640
850
640
850
640
850
29.7
30.5
30.8
31.7
31.4
32.3
2.00
1.83
2.02
1.84
2.02
1.85
22.9
24.3
23.9
25.4
24.5
25.9
113.0
103.2
114.6
104.5
115.5
105.2
4.36
4.89
4.48
5.04
4.55
5.11
3.7
640
850
640
850
640
850
24.8
25.8
25.4
26.5
25.7
26.8
15.6
18.6
15.7
18.8
15.8
18.9
1.59
1.65
1.50
1.55
1.46
1.51
30.2
31.5
30.6
31.8
30.7
31.9
15.6
15.7
16.9
17.1
17.7
17.8
2.8
2.9
2.6
2.7
2.4
2.5
640
850
640
850
640
850
32.3
33.2
33.5
34.4
34.1
35.0
2.04
1.86
2.06
1.88
2.07
1.89
25.3
26.8
26.3
27.9
26.9
28.5
116.8
106.1
118.5
107.5
119.3
108.1
4.65
5.22
4.77
5.36
4.83
5.43
4.0
640
850
640
850
640
850
24.1
25.1
24.8
25.8
25.1
26.2
15.4
18.4
15.5
18.6
15.6
18.7
1.69
1.75
1.59
1.65
1.55
1.60
29.9
31.1
30.2
31.5
30.4
31.6
14.3
14.4
15.6
15.7
16.2
16.4
3.0
3.2
2.8
2.9
2.6
2.7
640
850
640
850
640
850
33.5
34.4
34.7
35.7
35.4
36.3
2.06
1.88
2.08
1.90
2.09
1.91
26.4
28.0
27.5
29.2
28.0
29.8
118.5
107.5
120.3
108.9
121.2
109.5
4.78
5.36
4.90
5.50
4.96
5.57
4.1
640
850
640
850
640
850
23.5
24.4
24.2
25.2
24.5
25.5
15.2
18.2
15.4
18.4
15.5
18.5
1.79
1.85
1.69
1.74
1.64
1.69
29.6
30.8
29.9
31.1
30.1
31.3
13.1
13.2
14.3
14.4
15.0
15.1
3.3
3.5
3.1
3.2
2.9
3.0
640
850
640
850
640
850
34.8
35.7
36.0
37.0
36.6
37.6
2.08
1.90
2.10
1.92
2.11
1.93
27.5
29.2
28.6
30.4
29.2
31.0
120.3
108.9
122.1
110.3
123.0
111.0
4.90
5.51
5.03
5.64
5.09
5.71
4.2
640
850
640
850
640
850
21.9
22.8
22.7
14.7
17.6
14.9
2.02
2.08
1.90
28.8
30.0
29.2
4.0
4.2
3.7
23.7
23.1
24.1
17.9
15.1
18.1
1.96
1.84
1.91
30.4
29.4
30.6
10.9
11.0
12.0
12.0
12.5
12.6
640
850
640
850
640
850
20.2
21.1
21.1
14.0
16.8
14.4
2.27
2.34
2.14
28.0
29.1
28.4
22.0
21.5
22.4
17.2
14.5
17.4
2.21
2.08
2.15
640
850
640
850
640
850
18.4
19.2
19.3
20.1
19.7
20.6
13.2
15.8
13.6
16.3
13.8
16.5
2.55
2.64
2.41
2.49
2.35
2.42
2.1
2.5
2.1
2.5
2.1
2.4
2.8
2.4
2.8
2.4
2.7
3.1
2.7
3.1
2.7
2.9
3.4
2.9
3.4
2.9
3.2
3.7
3.2
3.7
3.2
3.4
4.0
3.4
4.0
3.4
3.5
4.1
3.5
4.1
3.5
3.6
4.2
3.6
4.2
3.6
3.9
3.4
3.6
4.8
4.9
4.4
29.5
28.6
29.7
8.9
9.0
9.8
9.9
10.3
10.4
4.6
4.1
4.2
27.1
28.2
27.5
28.6
27.8
28.9
7.2
7.3
8.0
8.1
8.4
8.5
5.6
5.8
5.2
5.4
4.8
5.0
Operation not recommended
Interpolation is permissable; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Page 12
1.8
640
850
640
850
640
850
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Rev.: 03/24/05D
Performance Data — Tranquility 20™ Model 024 - ECM Motor
850 CFM Nomimal (Rated) Airflow Cooling, 950 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
EWT °F
GPM
Airflow
TC
SC
kW
PSI
FT
CFM
4.0
1.6
3.7
6.0
3.5
8.1
8.0
5.6
12.9
4.0
1.5
3.5
6.0
3.1
7.2
8.0
5.1
11.8
4.0
1.3
3.0
6.0
2.8
6.5
8.0
4.5
10.4
4.0
1.3
3.0
6.0
2.6
6.0
8.0
4.3
9.9
4.0
1.2
2.8
6.0
2.5
5.8
8.0
4.0
9.2
4.0
1.1
2.5
6.0
2.3
5.3
8.0
3.8
8.8
4.0
1.0
2.3
6.0
2.2
5.1
8.0
3.5
8.1
4.0
1.0
2.3
6.0
2.2
5.0
8.0
3.5
8.0
4.0
1.0
2.3
6.0
2.1
4.9
8.0
3.4
7.9
4.0
1.0
2.3
6.0
2.0
4.6
8.0
3.2
7.4
4.0
0.9
2.1
6.0
1.9
4.4
8.0
3.1
7.2
4.0
0.9
2.1
6.0
1.8
4.2
8.0
3.0
6.9
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
690
950
16.0
16.5
1.70
1.57
10.6
11.2
91.5
86.1
2.76
3.08
2.1
1.8
610
850
610
850
610
850
28.1
29.2
28.1
29.3
28.2
29.3
16.1
18.7
16.1
18.7
16.1
18.8
0.78
0.83
0.76
0.80
0.74
0.78
30.6
31.9
30.6
31.9
30.7
32.0
35.9
35.3
37.1
36.5
38.1
37.5
-
690
950
690
950
690
950
18.1
18.7
18.8
19.4
19.2
19.8
1.73
1.60
1.74
1.61
1.74
1.61
12.5
13.3
13.2
14.0
13.5
14.3
94.3
88.2
95.3
88.9
95.8
89.3
3.07
3.43
3.17
3.54
3.23
3.60
2.5
610
850
610
850
610
850
28.4
29.5
28.6
29.7
28.7
29.9
16.6
19.3
16.6
19.3
16.6
19.3
0.89
0.94
0.84
0.89
0.82
0.86
31.3
32.7
31.4
32.7
31.4
32.8
31.9
31.3
34.1
33.5
35.2
34.6
-
690
950
690
950
690
950
21.0
21.7
21.9
22.5
22.3
23.0
1.77
1.64
1.78
1.65
1.79
1.65
15.2
16.1
16.0
17.0
16.4
17.4
98.2
91.1
99.3
92.0
99.9
92.4
3.48
3.89
3.60
4.01
3.65
4.08
2.8
610
850
610
850
610
850
28.2
29.3
28.5
29.7
28.6
29.8
16.7
19.4
16.8
19.5
16.8
19.5
1.00
1.06
0.94
0.99
0.91
0.96
31.5
32.9
31.6
33.0
31.7
33.0
28.1
27.7
30.4
29.8
31.5
30.9
1.6
1.7
1.5
1.6
1.4
1.5
690
950
690
950
690
950
23.9
24.6
24.8
25.6
25.3
26.1
1.81
1.67
1.83
1.69
1.83
1.69
17.8
18.9
18.7
19.9
19.1
20.3
102.1
94.0
103.3
94.9
104.0
95.5
3.86
4.31
3.99
4.45
4.05
4.52
3.1
610
850
610
850
610
850
27.3
28.4
27.8
28.9
28.1
29.2
16.4
19.1
16.6
19.3
16.7
19.4
1.13
1.20
1.06
1.12
1.02
1.08
31.1
32.5
31.4
32.7
31.5
32.8
24.1
23.7
26.3
25.8
27.4
26.9
1.9
2.0
1.8
1.9
1.7
1.7
690
950
690
950
690
950
26.7
27.5
27.7
28.6
28.3
29.1
1.85
1.71
1.87
1.73
1.88
1.73
20.4
21.7
21.3
22.7
21.8
23.2
105.8
96.8
107.2
97.8
107.9
98.4
4.22
4.71
4.35
4.85
4.41
4.92
3.4
610
850
610
850
610
850
26.1
27.2
26.8
27.9
27.1
28.2
16.0
18.7
16.3
18.9
16.4
19.1
1.28
1.36
1.20
1.27
1.16
1.23
30.5
31.8
30.8
32.2
31.0
32.3
20.4
20.0
22.3
22.0
23.4
23.0
2.3
2.4
2.2
2.3
2.0
2.1
690
950
690
950
690
950
29.4
30.3
30.5
31.4
31.1
32.0
1.89
1.75
1.91
1.77
1.92
1.77
22.8
24.3
23.9
25.4
24.4
25.9
109.4
99.5
110.9
100.6
111.7
101.2
4.54
5.07
4.67
5.21
4.74
5.29
3.7
610
850
610
850
610
850
24.8
25.8
25.5
26.5
25.9
26.9
15.6
18.1
15.8
18.4
15.9
18.6
1.45
1.54
1.36
1.44
1.32
1.39
29.7
31.0
30.1
31.4
30.3
31.6
17.1
16.8
18.7
18.4
19.6
19.3
2.8
3.0
2.6
2.7
2.4
2.5
690
950
690
950
690
950
31.9
32.9
33.1
34.1
33.7
34.8
1.93
1.79
1.95
1.80
1.96
1.81
25.2
26.8
26.3
27.9
26.9
28.5
112.8
102.1
114.4
103.3
115.2
103.9
4.84
5.40
4.97
5.54
5.04
5.62
3.9
610
850
610
850
610
850
24.0
25.0
24.8
25.8
25.1
26.1
15.3
17.8
15.6
18.1
15.7
18.3
1.55
1.64
1.45
1.54
1.41
1.49
29.3
30.6
29.7
31.0
29.9
31.2
15.5
15.2
17.0
16.8
17.9
17.6
3.1
3.3
2.9
3.0
2.7
2.8
690
950
690
950
690
950
33.2
34.2
34.3
35.4
35.0
36.0
1.95
1.80
1.97
1.82
1.98
1.83
26.3
28.0
27.4
29.2
28.0
29.8
114.5
103.3
116.1
104.5
116.9
105.1
4.98
5.55
5.10
5.69
5.17
5.77
4.1
610
850
610
850
610
850
23.3
24.2
24.0
25.0
24.4
25.4
15.0
17.5
15.3
17.8
15.4
18.0
1.65
1.74
1.55
1.63
1.50
1.58
28.9
30.2
29.3
30.6
29.5
30.8
14.1
13.9
15.6
15.3
16.3
16.0
3.4
3.6
3.2
3.3
3.0
3.1
690
950
690
950
690
950
34.4
35.5
35.6
36.7
36.2
37.3
1.97
1.82
1.99
1.84
2.00
1.85
27.5
29.2
28.6
30.4
29.1
31.0
116.1
104.6
117.8
105.8
118.6
106.4
5.11
5.70
5.23
5.84
5.30
5.91
4.2
610
850
610
850
610
850
21.8
14.5
1.86
28.2
4.1
22.6
22.5
16.9
14.8
1.97
1.75
29.4
28.5
23.4
22.9
23.8
17.2
14.9
17.3
1.86
1.70
1.80
29.7
28.7
29.9
11.7
11.5
12.8
12.6
13.5
13.2
4.0
3.5
3.7
610
850
610
850
610
850
20.3
14.1
2.11
27.5
21.1
21.0
21.8
21.3
22.2
16.4
14.3
16.6
14.4
16.7
2.23
1.99
2.10
1.93
2.04
28.7
27.8
29.0
28.0
29.2
9.6
9.4
10.5
10.4
11.1
10.9
5.1
4.6
4.7
4.2
4.4
610
850
610
850
610
850
18.9
13.7
2.39
27.1
19.7
19.5
20.3
19.9
20.6
16.0
13.9
16.2
14.0
16.3
2.52
2.25
2.38
2.19
2.31
28.3
27.3
28.5
27.4
28.6
7.9
7.8
8.7
8.5
9.1
8.9
6.0
5.4
5.6
4.9
5.1
2.1
2.5
2.1
2.5
2.1
2.4
2.8
2.4
2.8
2.4
2.6
3.1
2.6
3.1
2.6
2.9
3.4
2.9
3.4
2.9
3.1
3.6
3.1
3.6
3.1
3.4
3.9
3.4
3.9
3.4
3.5
4.0
3.5
4.0
3.5
3.6
4.2
3.6
4.2
3.6
4.3
3.8
4.9
Operation not recommended
5.8
Interpolation is permissable; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Rev.: 03/24/05D
Page 13
Performance Data — Tranquility 20™ Model 030 - PSC Motor
950 CFM Nomimal (Rated) Airflow Cooling, 950 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
EWT °F
GPM
Airflow
TC
SC
kW
PSI
FT
CFM
4.0
1.6
3.7
6.0
3.5
8.1
8.0
5.6
12.9
4.0
1.5
3.5
6.0
3.1
7.2
8.0
5.1
11.8
4.0
1.3
3.0
6.0
2.8
6.5
8.0
4.5
10.4
4.0
1.3
3.0
6.0
2.6
6.0
8.0
4.3
9.9
4.0
1.2
2.8
6.0
2.5
5.8
8.0
4.0
9.2
4.0
1.1
2.5
6.0
2.3
5.3
8.0
3.8
8.8
4.0
1.0
2.3
6.0
2.2
5.1
8.0
3.5
8.1
4.0
1.0
2.3
6.0
2.2
5.0
8.0
3.5
8.0
4.0
1.0
2.3
6.0
2.1
4.9
8.0
3.4
7.9
4.0
1.0
2.3
6.0
2.0
4.6
8.0
3.2
7.4
4.0
0.9
2.1
6.0
1.9
4.4
8.0
3.1
7.2
4.0
0.9
2.1
6.0
1.8
4.2
8.0
3.0
6.9
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
715
950
19.9
20.4
2.10
1.92
13.1
13.9
95.7
89.9
2.78
3.12
2.5
28.8
30.0
28.9
30.1
29.0
30.2
16.3
19.5
16.3
19.6
16.4
19.6
1.18
1.22
1.14
1.18
1.11
1.15
32.8
34.1
32.8
34.1
32.8
34.1
24.4
24.6
25.3
25.5
26.0
26.2
-
715
950
715
950
715
950
21.7
22.3
22.5
23.1
23.0
23.6
2.13
1.95
2.14
1.96
2.15
1.97
14.8
15.7
15.6
16.5
16.0
16.9
98.1
91.7
99.2
92.6
99.8
93.0
2.99
3.36
3.08
3.46
3.13
3.52
2.9
715
950
715
950
715
950
31.0
32.3
31.2
32.5
31.4
32.7
17.8
21.3
17.8
21.3
17.8
21.4
1.30
1.34
1.25
1.30
1.22
1.26
35.5
36.9
35.5
36.9
35.5
36.9
23.9
24.1
24.9
25.1
25.7
25.9
-
715
950
715
950
715
950
24.7
25.3
25.6
26.3
26.2
26.9
2.18
1.99
2.20
2.01
2.21
2.02
17.5
18.6
18.4
19.5
18.9
20.0
101.9
94.7
103.2
95.7
103.9
96.2
3.32
3.72
3.42
3.84
3.47
3.90
3.3
715
950
715
950
715
950
31.9
33.2
32.2
33.5
32.3
33.7
18.5
22.2
18.5
22.2
18.5
22.2
1.44
1.49
1.37
1.42
1.34
1.38
36.8
38.3
36.8
38.3
36.9
38.3
22.2
22.4
23.4
23.6
24.2
24.4
1.8
1.8
1.6
1.7
1.5
1.6
715
950
715
950
715
950
27.7
28.4
28.8
29.6
29.4
30.2
2.24
2.05
2.26
2.07
2.27
2.08
20.2
21.4
21.2
22.5
21.8
23.1
105.8
97.7
107.3
98.8
108.1
99.4
3.62
4.07
3.74
4.19
3.79
4.26
3.6
715
950
715
950
715
950
31.0
32.3
31.7
33.0
32.0
33.3
18.2
21.8
18.5
22.1
18.5
22.2
1.60
1.65
1.51
1.56
1.46
1.51
36.4
37.9
36.8
38.3
36.9
38.4
19.4
19.6
21.1
21.2
21.9
22.0
2.1
2.2
2.0
2.0
1.8
1.9
715
950
715
950
715
950
30.6
31.5
31.9
32.8
32.6
33.5
2.30
2.10
2.32
2.12
2.34
2.14
22.9
24.3
24.1
25.6
24.7
26.2
109.7
100.7
111.4
102.0
112.3
102.6
3.91
4.39
4.03
4.53
4.09
4.60
4.0
715
950
715
950
715
950
29.5
30.7
30.5
31.7
30.9
32.2
17.6
21.1
18.0
21.6
18.2
21.8
1.76
1.81
1.65
1.71
1.61
1.66
35.5
36.9
36.1
37.5
36.4
37.8
16.8
16.9
18.4
18.5
19.2
19.4
2.5
2.6
2.4
2.5
2.2
2.3
715
950
715
950
715
950
33.6
34.5
35.1
36.0
35.8
36.8
2.36
2.16
2.39
2.18
2.40
2.20
25.6
27.2
26.9
28.5
27.6
29.3
113.6
103.7
115.4
105.1
116.4
105.8
4.18
4.69
4.30
4.83
4.36
4.90
4.3
715
950
715
950
715
950
27.7
28.8
28.8
30.0
29.3
30.5
16.8
20.2
17.3
20.7
17.5
21.0
1.94
2.00
1.83
1.89
1.77
1.83
34.3
35.6
35.0
36.4
35.4
36.8
14.3
14.4
15.8
15.9
16.6
16.7
3.1
3.2
2.9
3.0
2.6
2.8
715
950
715
950
715
950
36.6
37.5
38.1
39.1
38.9
40.0
2.42
2.21
2.46
2.25
2.47
2.26
28.3
30.0
29.6
31.4
30.4
32.2
117.4
106.6
119.3
108.1
120.4
108.9
4.43
4.97
4.55
5.11
4.61
5.18
4.6
715
950
715
950
715
950
26.7
27.8
27.8
29.0
28.4
29.6
16.4
19.7
16.9
20.2
17.1
20.5
2.04
2.11
1.92
1.99
1.87
1.93
33.7
35.0
34.4
35.8
34.7
36.1
13.1
13.2
14.5
14.6
15.2
15.3
3.4
3.5
3.2
3.3
2.9
3.0
715
950
715
950
715
950
38.0
39.0
39.6
40.6
40.4
41.5
2.45
2.24
2.49
2.28
2.51
2.30
29.5
31.4
31.0
32.8
31.7
33.6
119.2
108.0
121.3
109.6
122.3
110.4
4.54
5.10
4.66
5.23
4.72
5.30
4.8
715
950
715
950
715
950
25.7
26.8
26.9
28.0
27.4
28.6
16.0
19.2
16.5
19.7
16.7
20.0
2.15
2.22
2.02
2.09
1.96
2.03
33.1
34.4
33.8
35.1
34.1
35.5
12.0
12.1
13.3
13.4
14.0
14.1
3.7
3.9
3.5
3.6
3.2
3.3
715
950
715
950
715
950
39.4
40.5
41.1
42.2
41.9
43.0
2.49
2.27
2.53
2.31
2.55
2.33
30.8
32.7
32.3
34.3
33.0
35.1
121.1
109.5
123.2
111.1
124.3
111.9
4.65
5.22
4.77
5.35
4.82
5.42
5.0
715
950
715
950
715
950
23.9
15.3
2.39
32.1
4.5
24.9
24.9
26.0
25.5
26.5
18.3
15.7
18.8
15.9
19.0
2.47
2.25
2.32
2.18
2.25
33.4
32.6
33.9
32.9
34.2
10.0
10.1
11.1
11.2
11.7
11.8
4.7
4.2
4.3
3.8
4.0
715
950
715
950
715
950
22.4
14.7
2.68
31.5
23.3
23.2
24.1
23.6
24.6
17.6
15.0
17.9
15.2
18.1
2.77
2.51
2.60
2.44
2.52
32.8
31.7
33.0
31.9
33.2
8.4
8.4
9.2
9.3
9.7
9.8
5.6
5.0
5.1
4.6
4.7
715
950
715
950
715
950
21.3
14.6
3.02
31.6
22.2
21.8
22.7
22.1
23.0
17.4
14.6
17.5
14.7
17.6
3.12
2.82
2.92
2.74
2.83
32.9
31.5
32.7
31.5
32.7
7.1
7.1
7.7
7.8
8.1
8.1
6.6
5.8
6.1
5.4
5.6
2.5
2.9
2.5
2.9
2.5
2.8
3.3
2.8
3.2
2.8
3.1
3.6
3.1
3.6
3.1
3.4
4.0
3.4
4.0
3.4
3.7
4.3
3.7
4.3
3.7
4.0
4.6
4.0
4.6
4.0
4.1
4.8
4.1
4.8
4.1
4.3
4.9
4.3
4.9
4.2
5.3
Operation not recommended
6.3
Interpolation is permissable; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Page 14
2.1
715
950
715
950
715
950
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Rev.: 03/16/05D
Performance Data — Tranquility 20™ Model 030 - ECM Motor
1,000 CFM Nomimal (Rated) Airflow Cooling, 1,100 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
EWT °F
GPM
Airflow
TC
SC
kW
PSI
FT
CFM
4.0
1.6
3.7
6.0
3.5
8.1
8.0
5.6
12.9
4.0
1.5
3.5
6.0
3.1
7.2
8.0
5.1
11.8
4.0
1.3
3.0
6.0
2.8
6.5
8.0
4.5
10.4
4.0
1.3
3.0
6.0
2.6
6.0
8.0
4.3
9.9
4.0
1.2
2.8
6.0
2.5
5.8
8.0
4.0
9.2
4.0
1.1
2.5
6.0
2.3
5.3
8.0
3.8
8.8
4.0
1.0
2.3
6.0
2.2
5.1
8.0
3.5
8.1
4.0
1.0
2.3
6.0
2.2
5.0
8.0
3.5
8.0
4.0
1.0
2.3
6.0
2.1
4.9
8.0
3.4
7.9
4.0
1.0
2.3
6.0
2.0
4.6
8.0
3.2
7.4
4.0
0.9
2.1
6.0
1.9
4.4
8.0
3.1
7.2
4.0
0.9
2.1
6.0
1.8
4.2
8.0
3.0
6.9
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
820
1100
19.8
20.4
2.03
1.88
13.3
14.1
92.4
87.2
2.86
3.19
2.5
2.1
730
1000
730
1000
730
1000
29.1
30.2
29.3
30.5
29.6
30.7
17.0
19.8
17.0
19.8
17.2
20.0
1.13
1.19
1.07
1.14
1.05
1.11
32.9
34.3
32.9
34.3
33.1
34.5
25.8
25.3
27.3
26.8
28.3
27.8
-
820
1100
820
1100
820
1100
21.8
22.5
22.7
23.4
23.2
23.9
2.05
1.89
2.06
1.90
2.07
1.91
15.1
16.1
16.0
17.0
16.4
17.4
94.6
88.9
95.6
89.7
96.2
90.1
3.12
3.48
3.23
3.60
3.29
3.67
2.9
730
1000
730
1000
730
1000
32.2
33.5
32.6
33.9
33.1
34.4
19.1
22.2
19.2
22.3
19.4
22.6
1.26
1.33
1.19
1.26
1.16
1.22
36.4
38.0
36.6
38.2
37.0
38.6
25.6
25.1
27.5
27.0
28.7
28.2
-
820
1100
820
1100
820
1100
24.9
25.6
25.9
26.7
26.4
27.2
2.09
1.93
2.10
1.94
2.11
1.95
18.0
19.1
18.9
20.1
19.4
20.6
98.1
91.6
99.2
92.5
99.8
92.9
3.49
3.90
3.61
4.03
3.67
4.10
3.2
730
1000
730
1000
730
1000
32.3
33.5
32.7
34.0
33.1
34.5
19.3
22.4
19.4
22.6
19.6
22.9
1.39
1.47
1.31
1.38
1.27
1.34
36.9
38.5
37.1
38.7
37.4
39.0
23.2
22.8
25.0
24.6
26.1
25.7
1.8
1.9
1.7
1.7
1.6
1.6
820
1100
820
1100
820
1100
27.8
28.7
29.0
29.9
29.6
30.5
2.13
1.97
2.15
1.99
2.16
2.00
20.7
22.0
21.8
23.1
22.3
23.7
101.4
94.2
102.7
95.2
103.4
95.7
3.83
4.27
3.96
4.41
4.02
4.49
3.6
730
1000
730
1000
730
1000
31.9
33.1
32.6
33.9
32.9
34.2
19.5
22.7
19.7
22.9
19.8
23.0
1.53
1.62
1.44
1.52
1.40
1.48
37.1
38.7
37.5
39.1
37.6
39.2
20.8
20.4
22.7
22.3
23.6
23.2
2.1
2.2
2.0
2.1
1.9
1.9
820
1100
820
1100
820
1100
30.8
31.8
32.1
33.1
32.8
33.8
2.18
2.01
2.20
2.04
2.22
2.05
23.4
24.9
24.6
26.2
25.3
26.8
104.8
96.7
106.3
97.9
107.0
98.5
4.14
4.62
4.27
4.77
4.34
4.84
3.9
730
1000
730
1000
730
1000
30.3
31.5
31.3
32.6
31.8
33.1
18.9
22.0
19.3
22.4
19.5
22.6
1.69
1.79
1.59
1.68
1.54
1.63
36.0
37.6
36.7
38.3
37.0
38.6
17.9
17.6
19.7
19.4
20.7
20.3
2.6
2.7
2.4
2.5
2.2
2.3
820
1100
820
1100
820
1100
33.8
34.8
35.2
36.3
36.0
37.1
2.23
2.06
2.26
2.09
2.28
2.10
26.1
27.8
27.5
29.2
28.2
30.0
108.1
99.3
109.8
100.6
110.7
101.3
4.43
4.94
4.57
5.10
4.64
5.18
4.3
730
1000
730
1000
730
1000
730
1000
730
1000
730
1000
28.4
29.6
29.6
30.8
30.2
31.4
18.1
21.1
18.6
21.7
18.8
21.9
1.87
1.98
1.76
1.86
1.70
1.80
34.8
36.3
35.6
37.1
36.0
37.5
28.9
30.7
30.4
32.3
31.2
33.1
34.2
35.7
38.3
39.5
2.32
2.14
30.3
32.1
28.6
29.8
18.2
21.2
1.85
1.96
34.9
36.4
40.1
41.3
2.35
2.17
31.9
33.9
29.2
30.4
18.5
21.5
1.80
1.90
35.3
36.8
41.0
42.3
2.37
2.19
32.7
34.8
111.5
101.9
113.4
103.3
114.4
104.1
113.2
103.2
115.2
104.8
116.3
105.6
4.71
5.25
4.85
5.41
4.93
5.50
4.84
5.40
5.00
5.58
5.08
5.67
4.6
1.97
2.08
820
1100
820
1100
820
1100
820
1100
820
1100
820
1100
2.29
2.12
2.32
2.14
2.34
2.16
17.8
20.7
3.2
3.3
2.9
3.1
2.7
2.8
3.5
3.6
3.3
3.4
3.0
3.1
36.8
37.9
38.4
39.6
39.3
40.5
27.5
28.6
15.2
15.0
16.9
16.6
17.7
17.4
13.9
13.7
15.4
15.2
16.3
16.0
730
1000
730
1000
730
1000
26.5
27.5
27.6
28.7
28.2
29.4
17.4
20.2
17.8
20.7
18.1
21.0
2.07
2.19
1.95
2.06
1.89
2.00
33.6
35.0
34.3
35.8
34.7
36.2
12.8
12.6
14.2
13.9
14.9
14.7
3.8
4.0
3.6
3.7
3.3
3.4
820
1100
820
1100
820
1100
39.8
41.1
41.7
43.0
42.7
44.1
2.35
2.17
2.38
2.20
2.40
2.21
31.6
33.6
33.4
35.5
34.3
36.5
115.0
104.6
117.1
106.2
118.3
107.1
4.98
5.55
5.14
5.73
5.23
5.83
4.9
730
1000
730
1000
730
1000
24.7
25.7
25.7
26.7
26.2
27.3
16.7
19.5
17.1
19.9
17.3
20.1
2.31
2.44
2.17
2.30
2.10
2.23
32.6
34.0
33.1
34.6
33.4
34.9
10.7
10.5
11.8
11.6
12.5
12.3
4.6
4.8
4.3
4.5
4.0
4.1
730
1000
730
1000
730
1000
23.2
16.4
2.59
32.1
24.1
24.0
24.9
24.4
25.4
19.0
16.5
19.2
16.6
19.4
2.74
2.43
2.57
2.35
2.49
33.5
32.3
33.7
32.5
33.9
9.0
8.8
9.9
9.7
10.4
10.2
5.7
5.1
5.3
4.7
4.9
730
1000
730
1000
730
1000
22.0
22.8
22.5
23.4
22.7
23.6
16.1
18.7
16.1
18.8
16.2
18.9
2.87
3.04
2.74
2.90
2.67
2.82
31.9
33.2
31.9
33.3
31.9
33.3
7.7
7.5
8.2
8.1
8.5
8.4
6.5
6.8
6.0
6.3
5.5
5.8
2.5
2.9
2.5
2.8
2.4
2.8
3.2
2.8
3.2
2.8
3.1
3.6
3.1
3.6
3.1
3.4
3.9
3.4
3.9
3.4
3.7
4.3
3.7
4.2
3.7
3.9
4.6
3.9
4.6
3.9
4.7
4.1
4.7
4.1
4.7
4.1
4.2
4.9
4.2
4.9
4.2
5.5
Operation not recommended
Interpolation is permissable; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Rev.: 03/16/05D
Page 15
Performance Data — Tranquility 20™ Model 036 - PSC Motor
1,250 CFM Nomimal (Rated) Airflow Cooling, 1,250 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
EWT °F
GPM
Airflow
TC
SC
kW
PSI
FT
CFM
4.5
2.0
4.6
6.8
3.4
7.9
9.0
5.9
13.6
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
4.5
1.7
3.9
6.8
3.3
7.6
9.0
5.7
13.2
4.5
1.5
3.5
6.8
3.2
7.4
9.0
5.4
12.5
4.5
1.3
3.0
6.8
3.1
7.2
9.0
5.2
12.0
4.5
1.2
2.8
6.8
2.9
6.7
9.0
5.0
11.6
4.5
1.1
2.5
6.8
2.9
6.7
9.0
4.8
11.1
4.5
1.0
2.3
6.8
2.8
6.5
9.0
4.5
10.4
4.5
1.0
2.2
6.8
2.7
6.2
9.0
4.5
10.3
4.5
0.9
2.1
6.8
2.6
6.0
9.0
4.4
10.2
4.5
0.8
1.8
6.8
2.6
6.0
9.0
4.2
9.7
4.5
0.8
1.8
6.8
2.5
5.8
9.0
4.0
9.2
4.5
0.7
1.6
6.8
2.5
5.8
9.0
3.8
8.8
Operation not recommended
940
1250
21.7
22.3
2.41
2.21
14.0
14.9
91.4
86.5
2.64
2.96
2.8
22.0
22.2
23.2
23.4
23.8
24.0
-
940
1250
940
1250
940
1250
24.0
24.6
24.9
25.5
25.4
26.0
2.44
2.23
2.45
2.24
2.46
2.25
16.1
17.1
16.9
18.0
17.4
18.4
93.6
88.2
94.5
88.9
95.0
89.3
2.88
3.23
2.97
3.34
3.02
3.40
3.3
40.8
42.4
40.9
42.5
41.1
42.7
22.6
22.8
23.1
23.3
23.8
24.0
-
940
1250
940
1250
940
1250
27.3
28.1
28.4
29.2
29.0
29.8
2.48
2.27
2.50
2.29
2.51
2.29
19.2
20.4
20.2
21.5
20.8
22.0
96.9
90.8
98.0
91.6
98.6
92.1
3.23
3.62
3.33
3.74
3.39
3.81
3.7
1.75
1.81
1.67
1.72
1.63
1.68
41.8
43.5
41.9
43.5
42.5
44.2
20.5
20.6
21.7
21.9
22.7
22.8
1.9
2.0
1.8
1.9
1.7
1.7
940
1250
940
1250
940
1250
30.8
31.6
32.1
33.0
32.8
33.7
2.53
2.32
2.56
2.34
2.57
2.35
22.4
23.7
23.6
25.0
24.2
25.7
100.3
93.4
101.6
94.4
102.3
95.0
3.56
4.00
3.68
4.13
3.75
4.21
4.1
21.6
25.9
21.9
26.2
21.9
26.3
1.90
1.96
1.80
1.86
1.76
1.82
41.1
42.7
41.6
43.3
41.8
43.5
18.2
18.4
19.7
19.8
20.4
20.5
2.3
2.4
2.1
2.2
2.0
2.1
940
1250
940
1250
940
1250
34.3
35.2
35.8
36.8
36.7
37.6
2.59
2.37
2.62
2.39
2.63
2.40
25.6
27.2
27.0
28.6
27.8
29.5
103.8
96.1
105.3
97.2
106.1
97.9
3.88
4.36
4.01
4.51
4.09
4.59
4.5
32.8
34.2
34.0
35.4
34.5
35.9
21.0
25.1
21.4
25.6
21.6
25.9
2.06
2.13
1.96
2.02
1.91
1.97
39.9
41.4
40.7
42.3
41.0
42.7
15.9
16.0
17.4
17.5
18.1
18.2
2.8
2.9
2.6
2.7
2.4
2.5
940
1250
940
1250
940
1250
37.9
38.9
39.7
40.7
40.6
41.7
2.65
2.42
2.68
2.45
2.70
2.47
28.9
30.6
30.5
32.3
31.4
33.3
107.3
98.8
109.1
100.2
110.0
100.9
4.19
4.70
4.33
4.87
4.41
4.95
4.9
940
1250
940
1250
940
1250
940
1250
940
1250
940
1250
30.8
32.1
32.0
33.4
32.6
34.0
20.2
24.1
20.6
24.7
20.9
25.0
2.25
2.32
2.13
2.21
2.08
2.15
38.5
40.0
39.3
40.9
39.7
41.3
32.2
34.2
34.1
36.1
35.1
37.2
37.9
39.4
43.4
44.6
2.75
2.52
33.9
36.0
31.0
32.3
20.2
24.2
2.24
2.31
38.6
40.2
45.6
46.8
2.79
2.55
35.9
38.1
31.6
32.9
20.5
24.5
2.18
2.25
39.0
40.6
46.8
48.1
2.82
2.57
37.0
39.2
110.9
101.6
112.9
103.1
114.0
104.0
112.8
103.0
114.9
104.7
116.1
105.6
4.48
5.04
4.64
5.21
4.72
5.30
4.63
5.20
4.79
5.38
4.87
5.47
5.3
2.36
2.44
940
1250
940
1250
940
1250
940
1250
940
1250
940
1250
2.72
2.48
2.75
2.52
2.77
2.54
19.8
23.7
3.4
3.5
3.2
3.3
2.9
3.0
3.8
3.9
3.5
3.6
3.2
3.4
41.6
42.7
43.6
44.8
44.7
45.9
29.8
31.1
13.7
13.8
15.0
15.1
15.7
15.8
12.7
12.8
13.9
14.0
14.5
14.6
940
1250
940
1250
940
1250
28.9
30.1
30.0
31.2
30.6
31.8
19.4
23.3
19.8
23.7
20.1
24.0
2.47
2.55
2.34
2.42
2.27
2.35
37.3
38.8
38.0
39.5
38.3
39.9
11.7
11.8
12.8
12.9
13.4
13.5
4.1
4.3
3.8
4.0
3.5
3.7
940
1250
940
1250
940
1250
45.3
46.5
47.6
48.9
48.9
50.2
2.79
2.55
2.83
2.59
2.86
2.61
35.6
37.8
37.7
40.0
38.9
41.3
114.6
104.5
116.9
106.2
118.2
107.2
4.77
5.35
4.93
5.54
5.02
5.64
5.7
940
1250
940
1250
940
1250
27.3
28.5
28.1
29.3
28.6
29.8
19.0
22.8
19.2
23.0
19.3
23.2
2.72
2.81
2.57
2.66
2.50
2.59
36.6
38.1
36.9
38.4
37.2
38.6
10.0
10.1
10.9
11.0
11.4
11.5
5.0
5.2
4.6
4.8
4.2
4.4
940
1250
940
1250
940
1250
26.4
18.9
2.99
36.6
27.5
26.9
28.0
27.2
28.3
22.6
19.0
22.8
19.1
22.8
3.09
2.85
2.95
2.77
2.86
38.1
36.6
38.1
36.7
38.1
8.8
8.9
9.4
9.5
9.8
9.9
6.2
5.5
5.7
5.1
5.3
940
1250
940
1250
940
1250
25.8
26.9
26.4
27.5
26.9
28.0
19.3
23.1
19.6
23.5
19.7
23.6
3.33
3.44
3.18
3.29
3.09
3.19
37.2
38.7
37.2
38.7
37.4
38.9
7.7
7.8
8.3
8.4
8.7
8.8
7.0
7.3
6.5
6.7
6.0
6.2
940
1250
940
1250
940
1250
32.8
34.1
33.1
34.5
33.3
34.7
18.6
22.3
18.6
22.3
18.7
22.4
1.49
1.54
1.43
1.48
1.40
1.45
37.9
39.4
38.0
39.5
38.1
39.6
940
1250
940
1250
940
1250
35.5
36.9
35.6
37.1
35.9
37.4
21.0
25.1
21.0
25.2
21.3
25.5
1.57
1.62
1.54
1.60
1.51
1.56
940
1250
940
1250
940
1250
35.9
37.3
36.2
37.7
36.9
38.5
21.7
26.0
21.8
26.1
22.1
26.4
940
1250
940
1250
940
1250
34.6
36.0
35.5
37.0
35.8
37.3
940
1250
940
1250
940
1250
3.3
2.8
3.3
2.8
3.2
3.7
3.2
3.7
3.2
3.6
4.1
3.5
4.1
3.5
3.9
4.5
3.9
4.5
3.9
4.2
4.9
4.2
4.9
4.2
4.6
5.3
4.6
5.3
4.5
5.5
4.7
5.5
4.7
5.5
4.7
4.9
5.7
4.9
5.7
4.9
5.9
Operation not recommended
Interpolation is permissable; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Page 16
2.4
2.8
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Rev.: 03/16/05D
Performance Data — Tranquility 20™ Model 036 - ECM Motor
1,250 CFM Nomimal (Rated) Airflow Cooling, 1,250 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
EWT °F
GPM
Airflow
TC
SC
kW
PSI
FT
CFM
4.5
2.0
4.6
6.8
3.4
7.9
9.0
5.9
13.6
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
4.5
1.7
3.9
6.8
3.3
7.6
9.0
5.7
13.2
4.5
1.5
3.5
6.8
3.2
7.4
9.0
5.4
12.5
4.5
1.3
3.0
6.8
3.1
7.2
9.0
5.2
12.0
4.5
1.2
2.8
6.8
2.9
6.7
9.0
5.0
11.6
4.5
1.1
2.5
6.8
2.9
6.7
9.0
4.8
11.1
4.5
1.0
2.3
6.8
2.8
6.5
9.0
4.5
10.4
4.5
1.0
2.2
6.8
2.7
6.2
9.0
4.5
10.3
4.5
0.9
2.1
6.8
2.6
6.0
9.0
4.4
10.2
4.5
0.8
1.8
6.8
2.6
6.0
9.0
4.2
9.7
4.5
0.8
1.8
6.8
2.5
5.8
9.0
4.0
9.2
4.5
0.7
1.6
6.8
2.5
5.8
9.0
3.8
8.8
Operation not recommended
900
1250
21.5
22.1
2.06
1.90
14.8
15.7
92.1
86.4
3.06
3.42
2.8
900
1250
900
1250
900
1250
33.0
34.3
33.1
34.4
33.3
34.6
19.5
22.7
19.5
22.7
19.6
22.8
1.16
1.22
1.13
1.19
1.10
1.16
36.9
38.4
36.9
38.4
36.9
38.5
28.5
28.0
29.4
28.9
30.3
29.8
-
900
1250
900
1250
900
1250
23.7
24.5
24.7
25.5
25.3
26.1
2.09
1.93
2.10
1.94
2.11
1.95
16.9
17.9
17.8
18.9
18.3
19.4
94.4
88.1
95.4
88.9
96.0
89.3
3.33
3.72
3.45
3.84
3.51
3.91
3.3
900
1250
900
1250
900
1250
36.1
37.5
36.3
37.7
36.7
38.1
22.4
26.1
22.4
26.1
22.5
26.2
1.29
1.36
1.24
1.32
1.21
1.28
40.4
42.2
40.5
42.2
40.7
42.4
28.1
27.6
29.2
28.7
30.3
29.8
-
900
1250
900
1250
900
1250
27.3
28.1
28.5
29.4
29.2
30.1
2.14
1.98
2.16
2.00
2.17
2.01
20.1
21.4
21.3
22.6
21.9
23.3
98.1
90.8
99.3
91.8
100.0
92.3
3.73
4.17
3.87
4.32
3.94
4.40
3.7
900
1250
900
1250
900
1250
37.1
38.6
37.4
38.9
37.6
39.1
23.9
27.9
23.8
27.7
23.8
27.6
1.42
1.51
1.37
1.45
1.33
1.41
41.9
43.7
42.0
43.8
42.1
43.9
26.1
25.6
27.3
26.9
28.3
27.8
2.0
2.0
1.8
1.9
1.7
1.8
900
1250
900
1250
900
1250
30.9
31.9
32.4
33.4
33.2
34.2
2.20
2.03
2.22
2.05
2.23
2.06
23.5
25.0
24.8
26.4
25.6
27.2
101.8
93.6
103.3
94.7
104.1
95.3
4.12
4.60
4.27
4.77
4.35
4.85
4.1
900
1250
900
1250
900
1250
36.3
37.8
37.1
38.5
37.3
38.8
23.8
27.7
24.1
28.0
24.1
28.0
1.60
1.69
1.50
1.59
1.46
1.54
41.7
43.5
42.1
43.9
42.2
44.0
22.7
22.4
24.7
24.2
25.6
25.1
2.4
2.4
2.2
2.3
2.0
2.1
900
1250
900
1250
900
1250
34.6
35.7
36.3
37.4
37.2
38.4
2.26
2.09
2.29
2.11
2.30
2.13
26.9
28.6
28.4
30.2
29.3
31.1
105.6
96.4
107.3
97.7
108.3
98.4
4.49
5.01
4.65
5.19
4.74
5.29
4.5
900
1250
900
1250
900
1250
34.6
36.0
35.8
37.2
36.3
37.7
23.1
26.9
23.6
27.5
23.8
27.7
1.76
1.86
1.65
1.75
1.60
1.70
40.6
42.3
41.4
43.1
41.7
43.5
19.7
19.4
21.6
21.3
22.6
22.2
2.9
3.0
2.7
2.8
2.5
2.6
900
1250
900
1250
900
1250
38.3
39.5
40.2
41.5
41.2
42.5
2.32
2.15
2.35
2.18
2.37
2.19
30.3
32.2
32.0
34.0
32.9
35.0
109.4
99.3
111.4
100.7
112.4
101.5
4.84
5.40
5.01
5.58
5.09
5.68
4.9
900
1250
900
1250
900
1250
900
1250
900
1250
900
1250
32.5
33.8
33.9
35.2
34.5
35.9
22.1
25.7
22.7
26.4
23.0
26.8
1.94
2.05
1.82
1.93
1.77
1.87
39.1
40.8
40.0
41.8
40.5
42.2
33.6
35.8
35.5
37.8
36.5
38.8
38.4
40.0
43.9
45.2
2.42
2.24
35.3
37.5
32.7
34.0
22.2
25.8
1.92
2.03
39.3
41.0
46.0
47.4
2.47
2.28
37.3
39.6
33.4
34.7
22.5
26.2
1.86
1.97
39.7
41.4
47.2
48.6
2.49
2.30
38.3
40.7
113.2
102.1
115.4
103.7
116.5
104.5
115.1
103.5
117.3
105.1
118.5
106.0
5.16
5.75
5.33
5.94
5.41
6.04
5.30
5.92
5.47
6.10
5.55
6.20
5.3
2.04
2.16
900
1250
900
1250
900
1250
900
1250
900
1250
900
1250
2.39
2.21
2.43
2.24
2.45
2.26
21.5
25.1
3.5
3.6
3.3
3.4
3.0
3.1
3.9
4.0
3.6
3.7
3.3
3.5
42.0
43.3
44.1
45.5
45.2
46.6
31.4
32.7
16.8
16.5
18.6
18.2
19.5
19.2
15.4
15.1
17.0
16.7
17.9
17.6
900
1250
900
1250
900
1250
30.3
31.5
31.6
32.9
32.3
33.6
21.0
24.4
21.6
25.2
22.0
25.5
2.14
2.27
2.02
2.14
1.96
2.07
37.6
39.2
38.5
40.2
39.0
40.7
14.1
13.9
15.7
15.4
16.5
16.2
4.2
4.4
3.9
4.1
3.6
3.8
900
1250
900
1250
900
1250
45.7
47.1
47.9
49.4
49.1
50.6
2.46
2.27
2.50
2.31
2.53
2.34
37.0
39.3
39.0
41.4
40.1
42.6
117.0
104.9
119.3
106.6
120.5
107.5
5.45
6.08
5.61
6.26
5.69
6.35
5.6
900
1250
900
1250
900
1250
28.2
29.3
29.3
30.5
30.0
31.2
20.1
23.4
20.6
23.9
20.9
24.3
2.38
2.52
2.24
2.37
2.18
2.30
36.3
37.9
37.0
38.6
37.4
39.0
11.8
11.6
13.1
12.9
13.8
13.5
5.1
5.3
4.7
4.9
4.4
4.6
900
1250
900
1250
900
1250
26.4
27.4
27.3
28.4
27.8
28.9
19.6
22.8
19.8
23.0
20.0
23.2
2.66
2.82
2.50
2.65
2.43
2.57
35.5
37.1
35.9
37.4
36.1
37.7
9.9
9.7
10.9
10.7
11.5
11.3
6.1
6.4
5.7
5.9
5.2
5.4
900
1250
900
1250
900
1250
25.1
26.1
25.8
26.8
26.1
27.1
19.3
22.5
19.5
22.7
19.5
22.7
2.98
3.15
2.81
2.97
2.72
2.88
35.3
36.8
35.4
36.9
35.5
37.0
8.4
8.3
9.2
9.0
9.6
9.4
7.2
7.5
6.7
7.0
6.2
6.4
2.4
2.8
3.2
2.8
3.2
2.8
3.2
3.7
3.2
3.7
3.1
3.5
4.1
3.5
4.1
3.5
3.9
4.5
3.9
4.5
3.8
4.2
4.9
4.2
4.9
4.2
4.5
5.2
4.5
5.2
4.5
5.4
4.7
5.4
4.7
5.4
4.6
4.8
5.6
4.8
5.6
4.8
Operation not recommended
Interpolation is permissable; extrapolation is not.
Rev.: 03/16/05D
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 17
Performance Data — Tranquility 20™ Model 042 - PSC Motor
1,400 CFM Nomimal (Rated) Airflow Cooling, 1,400 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
EWT °F
GPM
Airflow
TC
SC
kW
PSI
FT
CFM
5.5
1.3
3.0
8.3
2.3
5.3
11.0
4.0
9.2
5.5
1.1
2.5
8.3
2.2
5.1
11.0
3.9
9.0
5.5
1.0
2.3
8.3
2.1
4.9
11.0
3.7
8.5
5.5
0.9
2.1
8.3
2.1
4.9
11.0
3.6
8.3
5.5
0.9
2.1
8.3
2.0
4.6
11.0
3.5
8.1
5.5
0.8
1.8
8.3
2.0
4.6
11.0
3.2
7.4
5.5
0.7
1.6
8.3
1.9
4.4
11.0
3.2
7.4
5.5
0.7
1.6
8.3
1.9
4.3
11.0
3.2
7.3
5.5
0.7
1.6
8.3
1.8
4.2
11.0
3.1
7.2
5.5
0.6
1.4
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
8.3
1.8
4.2
11.0
2.9
6.7
5.5
0.6
1.4
8.3
1.7
3.9
11.0
2.9
6.7
5.5
0.6
1.4
8.3
1.6
3.7
11.0
2.7
6.2
Operation not recommended
1050
1400
27.1
27.8
2.94
2.69
17.7
18.8
93.9
88.4
2.70
3.03
3.6
38.8
40.4
39.4
41.0
39.8
41.5
23.0
27.6
23.0
27.6
23.1
27.6
1.53
1.58
1.51
1.56
1.46
1.50
44.0
45.7
44.5
46.3
44.8
46.6
25.4
25.6
26.1
26.3
27.4
27.6
-
1050
1400
1050
1400
1050
1400
29.6
30.4
30.7
31.5
31.3
32.1
2.96
2.71
2.97
2.72
2.98
2.73
20.0
21.2
21.0
22.3
21.6
22.9
96.1
90.1
97.1
90.8
97.6
91.3
2.93
3.28
3.02
3.40
3.08
3.46
4.3
1050
1400
1050
1400
1050
1400
42.0
43.8
42.5
44.3
43.3
45.1
25.7
30.8
25.7
30.7
25.9
31.0
1.77
1.83
1.70
1.76
1.66
1.72
48.1
50.0
48.3
50.3
48.9
50.9
23.8
24.0
25.0
25.2
26.1
26.3
-
1050
1400
1050
1400
1050
1400
33.8
34.7
35.2
36.2
36.0
37.0
3.01
2.75
3.03
2.77
3.04
2.78
23.9
25.4
25.3
26.8
26.0
27.6
99.8
92.9
101.1
93.9
101.8
94.5
3.29
3.69
3.41
3.83
3.48
3.90
4.9
1050
1400
1050
1400
1050
1400
42.5
44.3
43.1
44.8
43.6
45.4
26.6
31.9
26.6
31.9
26.7
32.0
1.99
2.06
1.88
1.94
1.83
1.89
49.3
51.2
49.5
51.4
49.8
51.8
21.3
21.5
22.9
23.1
23.8
24.0
2.4
2.5
2.2
2.3
2.1
2.1
1050
1400
1050
1400
1050
1400
38.3
39.3
40.1
41.2
41.1
42.2
3.07
2.81
3.10
2.83
3.11
2.85
28.1
29.8
29.7
31.5
30.6
32.5
103.8
96.0
105.4
97.2
106.2
97.9
3.66
4.10
3.79
4.26
3.87
4.34
5.4
1050
1400
1050
1400
1050
1400
40.6
42.3
41.9
43.6
42.5
44.3
26.0
31.1
26.4
31.7
26.6
31.9
2.17
2.24
2.06
2.13
1.99
2.05
48.0
49.9
48.9
50.9
49.3
51.3
18.7
18.9
20.3
20.5
21.4
21.6
2.8
2.9
2.6
2.7
2.4
2.5
1050
1400
1050
1400
1050
1400
43.0
44.1
45.1
46.3
45.7
46.9
3.15
2.88
3.19
2.91
3.20
2.93
32.3
34.3
34.2
36.3
34.8
36.9
107.9
99.2
109.7
100.6
110.3
101.0
4.00
4.49
4.14
4.65
4.18
4.70
5.9
1050
1400
1050
1400
1050
1400
38.0
39.6
39.6
41.3
40.4
42.1
24.8
29.7
25.5
30.6
25.9
31.0
2.37
2.45
2.25
2.33
2.19
2.26
46.1
48.0
47.3
49.2
47.9
49.8
16.1
16.2
17.6
17.8
18.4
18.6
3.5
3.6
3.2
3.4
3.0
3.1
1050
1400
1050
1400
1050
1400
47.6
48.9
49.9
51.2
51.1
52.5
3.24
2.96
3.29
3.01
3.33
3.04
36.6
38.8
38.6
41.0
39.7
42.1
112.0
102.3
114.0
103.9
115.1
104.7
4.31
4.84
4.44
4.99
4.51
5.06
6.5
1050
1400
1050
1400
1050
1400
1050
1400
1050
1400
1050
1400
35.1
36.6
36.8
38.3
37.6
39.2
23.4
28.0
24.2
29.0
24.6
29.5
2.59
2.68
2.46
2.54
2.40
2.48
44.0
45.7
45.2
47.0
45.8
47.6
40.5
43.0
42.6
45.2
43.7
46.3
43.0
44.7
54.2
55.6
3.42
3.12
42.4
44.9
35.3
36.8
23.5
28.1
2.59
2.67
44.1
45.9
56.5
58.0
3.50
3.20
44.3
47.0
36.1
37.6
23.9
28.6
2.52
2.60
44.7
46.5
57.6
59.2
3.54
3.24
45.3
48.1
116.0
105.4
118.0
107.0
119.1
107.8
117.8
106.8
119.8
108.3
120.8
109.1
4.56
5.12
4.66
5.24
4.71
5.29
4.65
5.22
4.73
5.32
4.77
5.35
7.0
2.72
2.82
1050
1400
1050
1400
1050
1400
1050
1400
1050
1400
1050
1400
3.35
3.07
3.42
3.13
3.46
3.17
22.7
27.2
4.3
4.4
4.0
4.1
3.7
3.8
4.7
4.9
4.4
4.6
4.1
4.2
52.1
53.5
54.5
55.9
55.7
57.2
33.7
35.1
13.6
13.7
14.9
15.1
15.7
15.8
12.4
12.5
13.6
13.8
14.3
14.5
1050
1400
1050
1400
1050
1400
32.3
33.6
33.8
35.2
34.6
36.0
22.0
26.4
22.7
27.2
23.1
27.7
2.86
2.95
2.71
2.80
2.64
2.73
42.0
43.7
43.0
44.8
43.6
45.3
11.3
11.4
12.5
12.6
13.1
13.2
5.2
5.4
4.8
5.0
4.4
4.6
1050
1400
1050
1400
1050
1400
56.3
57.8
58.5
60.0
59.6
61.1
3.48
3.18
3.57
3.26
3.62
3.31
44.2
46.9
46.0
48.9
46.9
49.8
119.6
108.2
121.6
109.7
122.5
110.4
4.73
5.32
4.80
5.39
4.82
5.41
7.5
1050
1400
1050
1400
1050
1400
29.9
31.1
31.0
32.3
31.7
33.0
21.0
25.1
21.5
25.7
21.8
26.1
3.17
3.28
3.00
3.10
2.92
3.02
40.7
42.3
41.3
42.9
41.7
43.3
9.4
9.5
10.3
10.4
10.9
10.9
6.3
6.5
5.8
6.1
5.4
5.6
1050
1400
1050
1400
1050
1400
28.4
29.6
29.0
30.2
29.4
30.6
20.6
24.7
20.7
24.8
20.8
24.9
3.20
3.31
3.12
3.22
3.07
3.17
39.3
40.9
39.6
41.2
39.9
41.5
8.9
8.9
9.3
9.4
9.6
9.7
7.5
7.8
7.0
7.2
6.4
6.7
1050
1400
1050
1400
1050
1400
28.0
20.9
3.31
39.3
29.1
28.2
25.0
20.9
3.42
3.27
40.9
39.3
29.3
28.4
29.6
25.0
20.9
25.1
3.38
3.25
3.35
40.9
39.5
41.1
8.5
8.5
8.6
8.7
8.8
8.8
3.7
4.3
3.7
4.2
3.6
4.2
4.8
4.2
4.8
4.2
4.7
5.4
4.6
5.4
4.6
5.1
5.9
5.1
5.9
5.1
5.6
6.5
5.6
6.5
5.6
6.0
7.0
6.0
7.0
6.0
7.2
6.2
7.2
6.2
7.2
6.2
6.4
7.5
6.4
7.5
6.4
Operation not recommended
8.9
9.2
8.2
8.6
7.6
7.9
Interpolation is permissable; extrapolation is not.
Rev.: 03/16/05D
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Page 18
3.1
1050
1400
1050
1400
1050
1400
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Performance Data — Tranquility 20™ Model 042 - ECM Motor
1,400 CFM Nomimal (Rated) Airflow Cooling, 1,400 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
GPM
EWT °F
Airflow
TC
SC
kW
PSI
FT
CFM
5.5
1.3
3.0
8.3
2.3
5.3
11.0
4.0
9.2
5.5
1.1
2.5
8.3
2.2
5.1
11.0
3.9
9.0
5.5
1.0
2.3
8.3
2.1
4.9
11.0
3.7
8.5
5.5
0.9
2.1
8.3
2.1
4.9
11.0
3.6
8.3
5.5
0.9
2.1
8.3
2.0
4.6
11.0
3.5
8.1
5.5
0.8
1.8
8.3
2.0
4.6
11.0
3.2
7.4
5.5
0.7
1.6
8.3
1.9
4.4
11.0
3.2
7.4
5.5
0.7
1.6
8.3
1.9
4.3
11.0
3.2
7.3
5.5
0.7
1.6
8.3
1.8
4.2
11.0
3.1
7.2
5.5
0.6
1.4
8.3
1.8
4.2
11.0
2.9
6.7
5.5
0.6
1.4
8.3
1.7
3.9
11.0
2.9
6.7
5.5
0.6
1.4
8.3
1.6
3.7
11.0
2.7
6.2
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
1050
1400
25.8
26.6
2.53
2.34
17.6
18.7
92.8
87.6
2.98
3.33
3.6
3.1
1050
1400
1050
1400
1050
1400
42.9
44.6
43.2
44.9
43.7
45.4
27.1
31.5
27.1
31.6
27.2
31.6
1.40
1.48
1.33
1.41
1.30
1.38
47.6
49.6
47.6
49.7
48.0
50.1
30.6
30.1
32.4
31.8
33.6
33.0
-
1050
1400
1050
1400
1050
1400
28.0
28.8
29.0
29.9
29.6
30.5
2.57
2.38
2.59
2.39
2.60
2.40
19.6
20.8
20.5
21.8
21.0
22.3
94.7
89.1
95.6
89.8
96.1
90.2
3.19
3.55
3.28
3.66
3.33
3.72
4.2
1050
1400
1050
1400
1050
1400
44.0
45.7
44.3
46.1
44.6
46.3
28.9
33.6
29.0
33.8
29.1
33.9
1.51
1.60
1.46
1.54
1.42
1.50
49.0
51.1
49.2
51.3
49.3
51.4
29.1
28.6
30.4
29.9
31.4
30.9
-
1050
1400
1050
1400
1050
1400
32.1
33.1
33.5
34.6
34.4
35.4
2.64
2.44
2.66
2.46
2.68
2.47
23.3
24.8
24.7
26.2
25.4
27.0
98.3
91.9
99.6
92.9
100.3
93.4
3.56
3.97
3.69
4.12
3.76
4.20
4.8
1050
1400
1050
1400
1050
1400
43.3
45.1
44.0
45.8
44.3
46.0
29.5
34.3
29.6
34.4
29.6
34.5
1.69
1.78
1.59
1.69
1.55
1.64
49.0
51.1
49.4
51.5
49.4
51.5
25.7
25.2
27.6
27.2
28.6
28.1
2.4
2.5
2.3
2.4
2.1
2.2
1050
1400
1050
1400
1050
1400
36.8
37.9
38.7
39.9
39.7
41.0
2.71
2.51
2.74
2.53
2.76
2.55
27.7
29.4
29.4
31.2
30.4
32.3
102.4
95.1
104.1
96.4
105.0
97.1
3.97
4.43
4.13
4.61
4.22
4.71
5.4
1050
1400
1050
1400
1050
1400
41.6
43.3
42.7
44.4
43.2
44.9
28.7
33.4
29.2
34.0
29.4
34.2
1.86
1.96
1.75
1.85
1.70
1.80
47.9
49.9
48.6
50.7
48.9
51.0
22.4
22.0
24.4
24.0
25.4
25.0
2.9
3.1
2.7
2.8
2.5
2.6
1050
1400
1050
1400
1050
1400
41.8
43.1
44.0
45.4
45.3
46.7
2.79
2.58
2.83
2.62
2.85
2.63
32.2
34.3
34.3
36.5
35.4
37.7
106.8
98.5
108.8
100.0
109.9
100.9
4.39
4.89
4.56
5.09
4.65
5.19
5.9
1050
1400
1050
1400
1050
1400
39.4
40.9
40.7
42.4
41.4
43.0
27.6
32.1
28.3
32.9
28.6
33.3
2.05
2.17
1.93
2.04
1.87
1.98
46.3
48.3
47.3
49.3
47.7
49.8
19.2
18.9
21.1
20.7
22.1
21.7
3.6
3.7
3.3
3.5
3.1
3.2
1050
1400
1050
1400
1050
1400
46.8
48.3
49.3
50.8
50.6
52.2
2.88
2.66
2.93
2.70
2.95
2.73
36.8
39.2
39.1
41.6
40.3
42.8
111.3
101.9
113.5
103.6
114.6
104.5
4.77
5.32
4.94
5.51
5.02
5.60
6.4
1050
1400
1050
1400
1050
1400
1050
1400
1050
1400
1050
1400
36.9
38.4
38.3
39.9
39.1
40.6
26.3
30.6
27.0
31.5
27.4
31.9
2.27
2.40
2.14
2.26
2.08
2.20
44.7
46.6
45.6
47.6
46.1
48.1
41.2
43.8
43.4
46.1
44.5
47.3
43.9
45.8
53.7
55.4
3.03
2.80
43.1
45.8
37.1
38.5
26.4
30.7
2.26
2.39
44.8
46.7
56.0
57.8
3.09
2.86
45.1
47.9
37.8
39.3
26.8
31.1
2.20
2.32
45.2
47.2
57.1
58.9
3.13
2.89
46.1
49.0
115.5
105.2
117.7
106.9
118.8
107.7
117.4
106.6
119.4
108.2
120.4
109.0
5.08
5.67
5.23
5.83
5.29
5.90
5.20
5.80
5.31
5.93
5.35
5.97
6.9
2.40
2.54
1050
1400
1050
1400
1050
1400
1050
1400
1050
1400
1050
1400
2.97
2.75
3.03
2.80
3.07
2.83
25.7
29.9
4.4
4.6
4.1
4.2
3.8
3.9
4.9
5.1
4.5
4.7
4.2
4.3
51.6
53.2
54.1
55.8
55.3
57.0
35.7
37.1
16.2
16.0
17.9
17.6
18.8
18.5
14.8
14.6
16.4
16.1
17.2
16.9
1050
1400
1050
1400
1050
1400
34.4
35.8
35.8
37.2
36.5
38.0
25.1
29.2
25.7
30.0
26.1
30.4
2.53
2.68
2.39
2.52
2.31
2.45
43.1
45.0
43.9
45.8
44.4
46.3
13.6
13.4
15.0
14.7
15.8
15.5
5.4
5.6
5.0
5.2
4.6
4.8
1050
1400
1050
1400
1050
1400
55.8
57.6
58.0
59.8
58.9
60.8
3.08
2.85
3.15
2.91
3.19
2.95
45.0
47.8
46.8
49.8
47.6
50.6
119.2
108.1
121.1
109.5
122.0
110.2
5.31
5.93
5.39
6.02
5.42
6.04
7.4
1050
1400
1050
1400
1050
1400
32.2
33.4
33.3
34.6
34.0
35.3
24.2
28.2
24.6
28.7
24.9
29.0
2.84
3.01
2.67
2.83
2.59
2.74
41.9
43.7
42.5
44.3
42.8
44.7
11.3
11.1
12.5
12.3
13.1
12.9
6.5
6.7
6.0
6.2
5.5
5.7
1050
1400
1050
1400
1050
1400
30.3
31.5
31.2
32.4
31.7
33.0
23.9
27.8
24.0
27.9
24.1
28.0
3.20
3.39
3.01
3.18
2.91
3.08
41.4
43.1
41.5
43.3
41.7
43.5
9.5
9.3
10.4
10.2
10.9
10.7
7.8
8.1
7.2
7.5
6.6
6.9
1050
1400
1050
1400
1050
1400
28.9
30.1
29.7
30.9
30.1
31.3
23.5
27.4
23.9
27.8
24.0
28.0
3.62
3.83
3.40
3.60
3.30
3.49
41.4
43.2
41.4
43.2
41.5
43.3
8.0
7.9
8.7
8.6
9.1
9.0
9.2
9.5
8.5
8.8
7.8
8.1
3.6
4.2
3.6
4.2
3.6
4.1
4.8
4.1
4.8
4.1
4.6
5.4
4.6
5.3
4.6
5.1
5.9
5.1
5.9
5.0
5.5
6.4
5.5
6.4
5.5
5.9
6.9
5.9
6.9
5.9
7.2
6.1
7.1
6.1
7.1
6.1
6.3
7.4
6.3
7.4
6.3
Operation not recommended
Interpolation is permissable; extrapolation is not.
Rev.: 03/16/05D
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 19
Performance Data — Tranquility 20™ Model 048 - PSC Motor
1,600 CFM Nomimal (Rated) Airflow Cooling, 1,600 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
GPM
EWT °F
Airflow
TC
SC
kW
PSI
FT
CFM
6.0
1.4
3.2
9.0
2.7
6.2
12.0
4.8
11.1
6.0
1.3
3.0
9.0
2.6
6.0
12.0
4.5
10.4
6.0
1.2
2.8
9.0
2.6
6.0
12.0
4.4
10.2
6.0
1.1
2.5
9.0
2.5
5.8
12.0
4.2
9.7
6.0
1.0
2.3
9.0
2.4
5.5
12.0
4.0
9.2
6.0
1.0
2.3
9.0
2.3
5.3
12.0
3.8
8.8
6.0
0.9
2.1
9.0
2.3
5.3
12.0
3.6
8.3
6.0
0.9
2.1
9.0
2.3
5.2
12.0
3.6
8.2
6.0
0.9
2.1
9.0
2.2
5.1
12.0
3.5
8.1
6.0
0.8
1.8
9.0
2.1
4.9
12.0
3.3
7.6
6.0
0.8
1.8
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
9.0
2.0
4.6
12.0
3.2
7.4
6.0
0.7
1.6
9.0
1.9
4.4
12.0
3.0
6.9
Operation not recommended
1200
1600
34.4
35.3
3.80
3.47
22.2
23.6
96.5
90.4
2.65
2.98
4.2
52.0
54.2
52.3
54.5
52.5
54.7
29.3
35.1
29.3
35.1
29.4
35.2
2.14
2.22
2.06
2.13
2.03
2.09
59.3
61.7
59.4
61.7
59.4
61.8
24.3
24.4
25.4
25.6
25.9
26.1
-
1200
1600
1200
1600
1200
1600
37.1
38.0
38.5
39.5
39.3
40.4
3.84
3.51
3.86
3.53
3.87
3.54
24.7
26.2
26.0
27.6
26.8
28.4
98.6
92.0
99.7
92.9
100.3
93.4
2.83
3.18
2.92
3.28
2.98
3.34
4.9
1200
1600
1200
1600
1200
1600
53.2
55.4
53.4
55.7
53.7
55.9
30.3
36.3
30.4
36.4
30.4
36.4
2.32
2.40
2.24
2.31
2.18
2.26
61.1
63.5
61.1
63.5
61.1
63.6
22.9
23.1
23.9
24.1
24.6
24.8
-
1200
1600
1200
1600
1200
1600
41.9
43.0
43.8
45.0
44.9
46.1
3.92
3.58
3.95
3.61
3.97
3.63
29.1
30.9
30.9
32.8
31.8
33.8
102.4
94.9
103.8
96.0
104.6
96.7
3.14
3.52
3.25
3.65
3.31
3.72
5.6
1200
1600
1200
1600
1200
1600
52.6
54.8
53.5
55.7
53.8
56.0
30.7
36.8
30.9
37.0
30.9
37.0
2.60
2.69
2.44
2.52
2.37
2.45
61.5
63.9
61.8
64.3
61.9
64.3
20.2
20.4
21.9
22.1
22.7
22.9
2.7
2.8
2.5
2.6
2.3
2.4
1200
1600
1200
1600
1200
1600
47.2
48.5
49.6
50.9
50.9
52.2
4.01
3.67
4.06
3.71
4.08
3.73
33.9
36.0
36.1
38.3
37.3
39.6
106.4
98.0
108.2
99.4
109.3
100.2
3.45
3.87
3.58
4.02
3.65
4.10
6.3
1200
1600
1200
1600
1200
1600
50.7
52.8
52.1
54.3
52.7
54.9
30.2
36.2
30.6
36.6
30.7
36.8
2.85
2.94
2.67
2.76
2.59
2.67
60.4
62.8
61.2
63.7
61.5
64.0
17.8
17.9
19.5
19.7
20.4
20.5
3.2
3.4
3.0
3.1
2.8
2.9
1200
1600
1200
1600
1200
1600
52.8
54.2
55.6
57.1
57.2
58.8
4.12
3.77
4.18
3.82
4.21
3.85
39.0
41.4
41.6
44.1
43.0
45.6
110.7
101.4
112.9
103.1
114.2
104.0
3.75
4.22
3.90
4.38
3.98
4.47
6.9
1200
1600
1200
1600
1200
1600
48.3
50.3
50.0
52.1
50.8
52.9
29.5
35.3
30.0
35.9
30.2
36.2
3.13
3.24
2.93
3.03
2.84
2.93
59.0
61.3
60.0
62.4
60.5
62.9
15.4
15.5
17.0
17.2
17.9
18.0
4.0
4.1
3.7
3.8
3.4
3.5
1200
1600
1200
1600
1200
1600
58.6
60.2
61.9
63.6
63.8
65.5
4.24
3.88
4.32
3.95
4.36
3.99
44.2
46.9
47.2
50.1
48.9
51.9
115.2
104.8
117.8
106.8
119.2
107.9
4.05
4.54
4.20
4.72
4.29
4.81
7.5
1200
1600
1200
1600
1200
1600
1200
1600
1200
1600
1200
1600
45.7
47.6
47.5
49.4
48.3
50.3
28.7
34.4
29.2
35.0
29.5
35.3
3.45
3.57
3.23
3.34
3.13
3.23
57.5
59.8
58.5
60.8
59.0
61.4
49.6
52.6
53.0
56.2
54.9
58.3
56.8
59.1
67.6
69.4
4.46
4.07
52.3
55.5
46.1
48.0
28.8
34.5
3.40
3.52
57.7
60.0
71.7
73.6
4.56
4.17
55.9
59.3
47.0
48.9
29.1
34.8
3.29
3.40
58.2
60.6
73.9
75.9
4.62
4.23
57.9
61.4
119.8
108.4
122.8
110.6
124.4
111.9
122.2
110.2
125.3
112.6
127.0
113.9
4.32
4.85
4.48
5.03
4.56
5.12
4.45
4.99
4.60
5.17
4.69
5.26
8.1
3.64
3.76
1200
1600
1200
1600
1200
1600
1200
1600
1200
1600
1200
1600
4.38
4.01
4.47
4.09
4.53
4.14
28.4
34.0
4.9
5.1
4.5
4.7
4.2
4.3
5.4
5.6
5.0
5.2
4.6
4.8
64.6
66.3
68.4
70.2
70.5
72.4
44.4
46.2
13.2
13.3
14.7
14.8
15.5
15.6
12.2
12.3
13.5
13.6
14.3
14.4
1200
1600
1200
1600
1200
1600
43.1
44.9
44.8
46.6
45.6
47.5
28.1
33.6
28.4
34.1
28.7
34.3
3.82
3.95
3.57
3.69
3.46
3.57
56.1
58.4
57.0
59.2
57.4
59.7
11.3
11.4
12.5
12.6
13.2
13.3
5.9
6.2
5.5
5.7
5.1
5.3
1200
1600
1200
1600
1200
1600
70.6
72.5
74.9
76.9
77.3
79.3
4.53
4.14
4.65
4.25
4.72
4.31
55.0
58.4
58.8
62.4
60.9
64.6
124.5
112.0
127.8
114.5
129.6
115.9
4.57
5.13
4.72
5.30
4.80
5.39
8.7
1200
1600
1200
1600
1200
1600
40.8
27.8
4.24
55.3
7.2
42.5
42.2
44.0
43.0
44.8
33.3
27.9
33.4
28.1
33.6
4.39
3.97
4.10
3.83
3.96
57.5
55.8
58.0
56.1
58.3
9.6
9.7
10.6
10.7
11.2
11.3
7.4
6.6
6.9
6.1
6.3
1200
1600
1200
1600
1200
1600
39.2
40.8
40.1
41.8
40.7
42.4
27.8
33.3
27.9
33.4
27.9
33.5
4.68
4.84
4.42
4.57
4.27
4.41
55.2
57.4
55.2
57.4
55.3
57.5
8.4
8.4
9.1
9.2
9.5
9.6
8.6
8.9
7.9
8.2
7.3
7.6
1200
1600
1200
1600
1200
1600
38.1
39.7
39.2
40.8
39.8
41.4
28.7
34.4
28.8
34.5
28.9
34.6
5.25
5.42
4.97
5.14
4.82
4.98
56.1
58.3
56.2
58.4
56.2
58.5
7.3
7.3
7.9
7.9
8.3
8.3
10.2
10.6
9.4
9.8
8.6
9.0
4.2
4.9
4.2
4.9
4.2
4.8
5.6
4.8
5.6
4.8
5.4
6.3
5.4
6.2
5.4
5.9
6.9
5.9
6.9
5.9
6.5
7.5
6.5
7.5
6.4
7.0
8.1
7.0
8.1
6.9
8.4
7.2
8.4
7.2
8.4
7.2
7.5
8.7
7.5
8.7
7.4
Operation not recommended
Interpolation is permissable; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Page 20
3.6
1200
1600
1200
1600
1200
1600
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Rev.: 03/16/05D
Performance Data — Tranquility 20™ Model 048 - ECM Motor
1,550 CFM Nomimal (Rated) Airflow Cooling, 1,650 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
EWT °F
GPM
Airflow
TC
SC
kW
PSI
FT
CFM
6.0
1.4
3.2
9.0
2.7
6.2
12.0
4.8
11.1
6.0
1.3
3.0
9.0
2.6
6.0
12.0
4.5
10.4
6.0
1.2
2.8
9.0
2.6
6.0
12.0
4.4
10.2
6.0
1.1
2.5
9.0
2.5
5.8
12.0
4.2
9.7
6.0
1.0
2.3
9.0
2.4
5.5
12.0
4.0
9.2
6.0
1.0
2.3
9.0
2.3
5.3
12.0
3.8
8.8
6.0
0.9
2.1
9.0
2.3
5.3
12.0
3.6
8.3
6.0
0.9
2.1
9.0
2.3
5.2
12.0
3.6
8.2
6.0
0.9
2.1
9.0
2.2
5.1
12.0
3.5
8.1
6.0
0.8
1.8
9.0
2.1
4.9
12.0
3.3
7.6
6.0
0.8
1.8
9.0
2.0
4.6
12.0
3.2
7.4
6.0
0.7
1.6
9.0
1.9
4.4
12.0
3.0
6.9
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
1200
1650
32.9
33.9
3.41
3.15
21.9
23.2
95.4
89.0
2.82
3.15
4.2
3.6
1120
1550
1120
1550
1120
1550
53.5
55.6
54.1
56.2
54.8
56.9
31.9
37.1
31.9
37.1
32.1
37.4
1.91
2.02
1.81
1.91
1.76
1.86
59.9
62.5
60.1
62.7
60.6
63.2
28.0
27.5
29.9
29.4
31.1
30.5
-
1200
1650
1200
1650
1200
1650
35.4
36.5
36.8
38.0
37.6
38.8
3.47
3.21
3.51
3.24
3.52
3.26
24.2
25.7
25.4
27.0
26.2
27.8
97.3
90.5
98.4
91.3
99.0
91.8
2.99
3.34
3.08
3.44
3.13
3.49
4.9
1120
1550
1120
1550
1120
1550
54.3
56.5
54.8
57.0
55.1
57.3
32.8
38.2
32.8
38.2
32.8
38.2
2.09
2.21
1.97
2.08
1.91
2.02
61.3
64.0
61.4
64.1
61.4
64.1
26.0
25.6
27.9
27.4
28.8
28.3
-
1200
1650
1200
1650
1200
1650
40.3
41.6
42.2
43.6
43.3
44.7
3.58
3.31
3.62
3.34
3.64
3.36
28.6
30.4
30.3
32.2
31.3
33.3
101.1
93.3
102.6
94.4
103.4
95.1
3.30
3.68
3.42
3.82
3.49
3.89
5.6
1120
1550
1120
1550
1120
1550
53.5
55.6
54.4
56.5
54.7
56.8
32.9
38.3
33.1
38.5
33.1
38.5
2.31
2.44
2.16
2.28
2.09
2.21
61.3
63.9
61.6
64.3
61.7
64.3
23.2
22.8
25.2
24.8
26.2
25.7
2.7
2.9
2.6
2.7
2.4
2.5
1200
1650
1200
1650
1200
1650
45.8
47.2
48.2
49.7
49.5
51.1
3.69
3.41
3.74
3.45
3.76
3.48
33.5
35.6
35.7
37.9
36.9
39.3
105.3
96.5
107.2
97.9
108.2
98.7
3.64
4.06
3.78
4.22
3.86
4.30
6.2
1120
1550
1120
1550
1120
1550
51.7
53.7
53.0
55.1
53.6
55.7
32.4
37.7
32.8
38.2
32.9
38.3
2.55
2.70
2.38
2.52
2.30
2.43
60.3
62.9
61.0
63.7
61.3
64.0
20.2
19.9
22.3
21.9
23.3
22.9
3.3
3.5
3.1
3.2
2.9
3.0
1200
1650
1200
1650
1200
1650
51.5
53.1
54.4
56.1
56.0
57.7
3.80
3.52
3.86
3.57
3.89
3.60
38.7
41.1
41.3
43.9
42.8
45.4
109.7
99.8
112.0
101.5
113.2
102.4
3.97
4.43
4.13
4.60
4.21
4.70
6.8
1120
1550
1120
1550
1120
1550
49.3
51.3
51.0
53.0
51.8
53.8
31.6
36.7
32.2
37.4
32.4
37.7
2.83
3.00
2.64
2.79
2.54
2.69
58.9
61.5
59.9
62.5
60.4
63.0
17.4
17.1
19.3
19.0
20.3
20.0
4.1
4.2
3.8
3.9
3.5
3.6
1200
1650
1200
1650
1200
1650
57.3
59.1
60.6
62.4
62.3
64.2
3.92
3.63
3.99
3.69
4.03
3.73
44.0
46.7
46.9
49.8
48.5
51.5
114.2
103.2
116.7
105.0
118.1
106.0
4.28
4.78
4.45
4.96
4.53
5.05
7.4
1120
1550
1120
1550
1120
1550
1120
1550
1120
1550
1120
1550
46.6
48.4
48.4
50.4
49.3
51.3
30.6
35.6
31.3
36.4
31.6
36.8
3.15
3.33
2.93
3.10
2.83
2.99
57.3
59.8
58.4
60.9
58.9
61.5
49.1
52.2
52.2
55.4
53.7
57.1
56.5
59.0
65.7
67.8
4.12
3.80
51.5
54.7
47.0
48.9
30.7
35.8
3.10
3.28
57.6
60.1
69.1
71.2
4.20
3.89
54.5
57.9
48.0
49.8
31.1
36.2
2.99
3.17
58.1
60.6
70.8
73.0
4.25
3.93
56.0
59.5
118.6
106.5
121.3
108.4
122.6
109.5
120.7
108.0
123.3
110.0
124.6
110.9
4.56
5.09
4.71
5.26
4.79
5.34
4.68
5.22
4.81
5.37
4.88
5.44
8.0
3.33
3.52
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
4.05
3.74
4.13
3.82
4.18
3.86
30.1
35.0
5.0
5.2
4.6
4.8
4.3
4.4
5.6
5.8
5.1
5.4
4.7
4.9
63.0
65.0
66.4
68.5
68.2
70.3
45.1
46.9
14.8
14.5
16.5
16.2
17.4
17.1
13.5
13.3
15.2
14.9
16.0
15.7
1120
1550
1120
1550
1120
1550
43.7
45.4
45.6
47.4
46.6
48.4
29.5
34.4
30.2
35.2
30.6
35.6
3.51
3.72
3.27
3.46
3.16
3.34
55.7
58.1
56.8
59.2
57.3
59.8
12.4
12.2
13.9
13.7
14.8
14.5
6.1
6.4
5.7
5.9
5.2
5.4
1200
1650
1200
1650
1200
1650
68.4
70.5
71.7
73.9
73.3
75.6
4.18
3.86
4.28
3.95
4.33
4.00
53.9
57.3
56.8
60.4
58.2
61.9
122.8
109.6
125.3
111.5
126.6
112.4
4.79
5.35
4.91
5.48
4.96
5.54
8.6
1120
1550
1120
1550
1120
1550
40.8
42.4
42.6
44.3
43.6
45.3
28.5
33.2
29.2
33.9
29.5
34.3
3.92
4.15
3.66
3.87
3.53
3.73
54.3
56.6
55.2
57.5
55.7
58.1
10.4
10.2
11.7
11.5
12.3
12.1
7.4
7.7
6.8
7.1
6.3
6.5
1120
1550
1120
1550
1120
1550
38.0
39.5
39.7
41.3
40.6
42.2
27.7
32.2
28.2
32.8
28.5
33.1
4.39
4.65
4.10
4.33
3.95
4.18
53.1
55.4
53.8
56.1
54.2
56.5
8.6
8.5
9.7
9.5
10.3
10.1
8.8
9.2
8.2
8.5
7.5
7.8
1120
1550
1120
1550
1120
1550
35.5
36.9
37.0
38.4
37.8
39.3
27.1
31.6
27.4
31.9
27.6
32.1
4.93
5.21
4.59
4.86
4.44
4.69
52.5
54.8
52.8
55.1
53.0
55.3
7.2
7.1
8.0
7.9
8.5
8.4
10.5
10.9
9.7
10.1
8.9
9.3
4.2
4.9
4.2
4.9
4.2
4.8
5.5
4.8
5.5
4.8
5.3
6.2
5.3
6.2
5.3
5.9
6.8
5.9
6.8
5.8
6.4
7.4
6.4
7.4
6.4
6.9
8.0
6.9
8.0
6.9
8.3
7.1
8.3
7.1
8.3
7.1
7.4
8.6
7.4
8.5
7.3
Operation not recommended
Interpolation is permissable; extrapolation is not.
Rev.: 03/16/05D
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 21
Performance Data — Tranquility 20™ Model 060 - PSC Motor
1,950 CFM Nomimal (Rated) Airflow Cooling, 1,950 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
GPM
EWT °F
Airflow
TC
SC
kW
PSI
FT
CFM
7.5
0.8
1.8
11.3
2.4
5.5
15.0
5.0
11.6
7.5
0.6
1.4
11.3
2.3
5.3
15.0
4.8
11.1
7.5
0.5
1.2
11.3
2.2
5.1
15.0
4.5
10.4
7.5
0.4
0.9
11.3
2.1
4.9
15.0
4.3
9.9
7.5
0.3
0.7
11.3
2.1
4.9
15.0
4.1
9.5
7.5
0.3
0.7
11.3
2.0
4.6
15.0
3.9
9.0
7.5
0.2
0.5
11.3
1.9
4.4
15.0
3.6
8.3
7.5
0.2
0.5
11.3
1.9
4.3
15.0
3.6
8.2
7.5
0.2
0.5
11.3
1.8
4.2
15.0
3.5
8.1
7.5
0.1
0.2
11.3
1.8
4.2
15.0
3.3
7.6
7.5
0.1
0.2
11.3
1.7
3.9
15.0
3.1
7.2
7.5
0.0
0.0
11.3
1.7
3.9
15.0
2.9
6.7
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
1465
1950
40.8
41.9
4.43
4.05
26.6
28.2
95.8
89.9
2.70
3.03
4.8
61.8
64.3
63.0
65.6
64.9
67.6
36.2
43.4
36.5
43.7
37.4
44.8
2.64
2.73
2.63
2.72
2.60
2.69
70.8
73.6
72.0
74.9
73.8
76.7
23.4
23.6
23.9
24.1
24.9
25.1
-
1465
1950
1465
1950
1465
1950
44.1
45.3
45.8
47.0
46.7
48.0
4.50
4.11
4.53
4.14
4.55
4.16
29.6
31.4
31.1
33.0
32.0
33.9
97.9
91.5
99.0
92.3
99.5
92.8
2.88
3.23
2.96
3.33
3.01
3.38
5.6
1465
1950
1465
1950
1465
1950
64.9
67.5
65.5
68.2
66.0
68.8
38.6
46.2
38.7
46.3
38.8
46.4
2.93
3.03
2.83
2.92
2.78
2.87
74.8
77.8
75.1
78.1
75.5
78.5
22.2
22.3
23.1
23.3
23.8
23.9
-
1465
1950
1465
1950
1465
1950
50.0
51.3
52.1
53.5
53.3
54.7
4.61
4.22
4.65
4.25
4.67
4.27
34.9
37.0
36.8
39.1
37.9
40.2
101.6
94.4
102.9
95.4
103.7
96.0
3.18
3.57
3.28
3.69
3.34
3.75
6.4
1465
1950
1465
1950
1465
1950
65.4
68.1
66.1
68.8
66.4
69.2
39.8
47.6
39.8
47.6
39.8
47.6
3.21
3.32
3.04
3.14
2.96
3.06
76.4
79.4
76.4
79.5
76.5
79.6
20.4
20.6
21.7
21.9
22.4
22.6
3.2
3.3
3.0
3.1
2.7
2.8
1465
1950
1465
1950
1465
1950
56.1
57.6
58.7
60.3
60.1
61.7
4.73
4.32
4.77
4.37
4.80
4.39
40.5
43.0
42.9
45.5
44.1
46.8
105.5
97.4
107.1
98.6
108.0
99.3
3.48
3.91
3.60
4.05
3.67
4.12
7.2
1465
1950
1465
1950
1465
1950
64.0
66.7
65.3
68.0
65.7
68.4
39.9
47.8
40.1
48.0
40.1
48.0
3.51
3.63
3.30
3.41
3.20
3.31
76.0
79.0
76.5
79.6
76.6
79.7
18.3
18.4
19.8
19.9
20.5
20.6
3.8
4.0
3.6
3.7
3.3
3.4
1465
1950
1465
1950
1465
1950
62.5
64.2
65.5
67.2
67.1
68.9
4.84
4.43
4.90
4.48
4.93
4.51
46.3
49.1
49.0
52.0
50.5
53.5
109.5
100.5
111.4
101.9
112.4
102.7
3.78
4.24
3.92
4.40
3.99
4.48
7.9
1465
1950
1465
1950
1465
1950
61.6
64.2
63.4
66.0
64.1
66.8
39.2
46.9
39.7
47.6
39.9
47.8
3.84
3.97
3.61
3.73
3.49
3.61
74.7
77.7
75.7
78.7
76.1
79.1
16.0
16.2
17.6
17.7
18.4
18.5
4.7
4.9
4.4
4.6
4.0
4.2
1465
1950
1465
1950
1465
1950
68.9
70.7
72.2
74.1
73.9
75.9
4.97
4.54
5.03
4.60
5.07
4.63
52.0
55.2
55.0
58.4
56.6
60.1
113.5
103.6
115.6
105.2
116.7
106.0
4.06
4.56
4.20
4.72
4.28
4.80
8.6
1465
1950
1465
1950
1465
1950
1465
1950
1465
1950
1465
1950
58.6
61.1
60.7
63.2
61.7
64.3
38.1
45.6
38.9
46.6
39.2
47.0
4.23
4.37
3.96
4.09
3.83
3.96
73.1
76.0
74.2
77.2
74.8
77.8
57.7
61.2
60.8
64.5
62.5
66.3
72.1
75.0
78.1
80.1
5.15
4.71
60.4
64.0
59.1
61.6
38.3
45.8
4.16
4.30
73.3
76.3
81.6
83.7
5.23
4.79
63.5
67.4
60.2
62.7
38.7
46.3
4.03
4.17
73.9
76.9
83.4
85.6
5.28
4.83
65.1
69.1
117.5
106.6
119.7
108.3
120.8
109.2
119.3
108.1
121.5
109.8
122.7
110.6
4.32
4.85
4.46
5.01
4.53
5.08
4.44
4.98
4.57
5.13
4.63
5.20
9.3
4.44
4.59
1465
1950
1465
1950
1465
1950
1465
1950
1465
1950
1465
1950
5.09
4.65
5.16
4.72
5.21
4.76
37.4
44.8
5.8
6.0
5.4
5.6
5.0
5.1
6.4
6.7
6.0
6.2
5.5
5.7
75.1
77.1
78.6
80.7
80.4
82.6
56.9
59.3
13.9
14.0
15.3
15.4
16.1
16.2
12.8
12.9
14.2
14.3
14.9
15.0
1465
1950
1465
1950
1465
1950
55.2
57.5
57.5
59.9
58.6
61.1
36.8
44.0
37.7
45.1
38.1
45.6
4.66
4.82
4.37
4.51
4.23
4.37
71.2
74.0
72.4
75.3
73.1
76.0
11.9
11.9
13.2
13.3
13.9
14.0
7.1
7.4
6.6
6.8
6.0
6.3
1465
1950
1465
1950
1465
1950
81.0
83.2
84.5
86.8
86.3
88.6
5.22
4.77
5.30
4.85
5.35
4.89
63.0
66.9
66.2
70.2
67.7
71.9
121.2
109.5
123.4
111.2
124.6
112.1
4.55
5.11
4.67
5.25
4.73
5.31
9.9
1465
1950
1465
1950
1465
1950
51.7
35.3
5.15
69.3
53.9
54.0
56.2
55.2
57.5
42.3
36.3
43.4
36.7
44.0
5.32
4.83
4.99
4.67
4.83
72.1
70.5
73.3
71.1
74.0
10.0
10.1
11.2
11.3
11.8
11.9
8.9
7.9
8.3
7.3
7.6
1465
1950
1465
1950
1465
1950
48.2
50.2
50.4
52.5
51.5
53.7
33.8
40.5
34.8
41.6
35.2
42.2
5.70
5.89
5.35
5.53
5.18
5.35
67.7
70.4
68.7
71.4
69.2
72.0
8.5
8.5
9.4
9.5
10.0
10.0
10.3
10.7
9.5
9.9
8.7
9.1
1465
1950
1465
1950
1465
1950
45.0
32.5
6.32
66.6
46.9
46.9
48.9
48.0
50.0
39.0
33.3
39.9
33.7
40.4
6.53
5.93
6.13
5.74
5.94
69.2
67.2
69.9
67.6
70.3
7.1
7.2
7.9
8.0
8.4
8.4
12.7
11.3
11.7
10.4
10.8
4.8
5.6
4.8
5.6
4.8
5.5
6.4
5.5
6.4
5.5
6.1
7.1
6.1
7.1
6.1
6.8
7.9
6.8
7.9
6.7
7.4
8.6
7.4
8.6
7.4
8.0
9.3
8.0
9.2
7.9
9.6
8.3
9.6
8.2
9.6
8.2
8.5
9.9
8.5
9.9
8.5
8.6
Operation not recommended
12.2
Interpolation is permissable; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Page 22
4.1
1465
1950
1465
1950
1465
1950
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Res.: 03/16/05D
Performance Data — Tranquility 20™ Model 060 - ECM Motor
1,825 CFM Nomimal (Rated) Airflow Cooling, 2,050 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
GPM
EWT °F
Airflow
TC
SC
kW
PSI
FT
CFM
7.5
0.8
1.8
11.3
2.4
5.5
15.0
5.0
11.6
7.5
0.6
1.4
11.3
2.3
5.3
15.0
4.8
11.1
7.5
0.5
1.2
11.3
2.2
5.1
15.0
4.5
10.4
7.5
0.4
0.9
11.3
2.1
4.9
15.0
4.3
9.9
7.5
0.3
0.7
11.3
2.1
4.9
15.0
4.1
9.5
7.5
0.3
0.7
11.3
2.0
4.6
15.0
3.9
9.0
7.5
0.2
0.5
11.3
1.9
4.4
15.0
3.6
8.3
7.5
0.2
0.5
11.3
1.9
4.3
15.0
3.6
8.2
7.5
0.2
0.5
11.3
1.8
4.2
15.0
3.5
8.1
7.5
0.1
0.2
11.3
1.8
4.2
15.0
3.3
7.6
7.5
0.1
0.2
11.3
1.7
3.9
15.0
3.1
7.2
7.5
0.0
0.0
11.3
1.7
3.9
15.0
2.9
6.7
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
1470
2050
39.6
40.9
4.02
3.72
26.6
28.3
95.0
88.5
2.89
3.22
4.7
4.1
1320
1825
1320
1825
1320
1825
62.0
64.4
63.4
65.9
65.6
68.2
37.7
43.9
38.5
44.8
39.8
46.3
2.30
2.44
2.32
2.45
2.27
2.40
69.7
72.7
71.2
74.2
73.2
76.4
26.9
26.5
27.4
26.9
28.9
28.4
-
1470
2050
1470
2050
1470
2050
42.9
44.2
44.5
45.9
45.4
46.8
4.09
3.78
4.13
3.82
4.15
3.83
29.5
31.4
31.0
33.0
31.8
33.8
97.0
90.0
98.0
90.7
98.6
91.1
3.07
3.42
3.16
3.52
3.21
3.58
5.6
1320
1825
1320
1825
1320
1825
65.6
68.2
66.3
69.0
67.1
69.8
40.3
46.9
40.5
47.1
40.9
47.6
2.57
2.72
2.49
2.64
2.45
2.59
74.2
77.4
74.7
77.9
75.3
78.6
25.5
25.1
26.6
26.1
27.4
26.9
-
1470
2050
1470
2050
1470
2050
48.6
50.1
50.7
52.2
51.8
53.4
4.21
3.89
4.25
3.93
4.27
3.95
34.7
36.9
36.6
38.9
37.7
40.0
100.6
92.6
101.9
93.6
102.6
94.1
3.38
3.77
3.49
3.90
3.55
3.96
6.3
1320
1825
1320
1825
1320
1825
66.5
69.1
67.2
69.9
68.1
70.8
41.3
48.1
41.4
48.2
41.9
48.7
2.84
3.00
2.69
2.85
2.62
2.77
76.0
79.3
76.2
79.5
76.9
80.2
23.4
23.0
25.0
24.5
26.0
25.5
3.2
3.4
3.0
3.1
2.8
2.9
1470
2050
1470
2050
1470
2050
54.7
56.4
57.2
59.0
58.7
60.5
4.33
4.00
4.38
4.04
4.40
4.07
40.3
42.8
42.6
45.3
43.9
46.6
104.4
95.5
106.1
96.7
106.9
97.3
3.70
4.13
3.83
4.28
3.90
4.36
7.1
1320
1825
1320
1825
1320
1825
65.3
67.9
66.5
69.1
66.9
69.6
41.3
48.0
41.6
48.4
41.6
48.4
3.11
3.29
2.93
3.09
2.84
3.00
75.8
79.1
76.4
79.7
76.5
79.8
21.0
20.6
22.7
22.3
23.6
23.2
3.9
4.1
3.7
3.8
3.4
3.5
1470
2050
1470
2050
1470
2050
61.0
62.9
64.0
66.0
65.6
67.6
4.45
4.11
4.50
4.16
4.54
4.19
46.0
48.9
48.7
51.8
50.2
53.3
108.4
98.4
110.3
99.8
111.3
100.5
4.02
4.49
4.16
4.65
4.24
4.73
7.8
1320
1825
1320
1825
1320
1825
63.4
65.9
64.6
67.2
65.4
68.0
40.7
47.4
41.1
47.8
41.3
48.1
3.35
3.54
3.20
3.38
3.10
3.28
74.7
77.9
75.4
78.7
75.9
79.1
18.9
18.6
20.2
19.9
21.1
20.8
4.9
5.0
4.5
4.7
4.2
4.3
1470
2050
1470
2050
1470
2050
66.1
68.2
70.7
72.9
72.4
74.7
4.55
4.20
4.64
4.28
4.67
4.32
50.7
53.8
54.8
58.2
56.4
59.9
111.6
100.8
114.5
102.9
115.6
103.7
4.26
4.76
4.47
4.98
4.54
5.07
8.5
1320
1825
1320
1825
1320
1825
1320
1825
1320
1825
1320
1825
59.7
62.1
61.9
64.3
62.9
65.4
39.5
46.0
40.2
46.8
40.6
47.2
3.76
3.98
3.52
3.72
3.40
3.60
72.5
75.6
73.8
77.0
74.4
77.6
57.4
61.0
60.5
64.3
62.1
66.0
71.4
74.5
76.5
78.9
4.76
4.40
60.1
63.8
60.2
62.6
39.7
46.2
3.70
3.92
72.8
75.9
79.9
82.4
4.84
4.47
63.1
67.1
61.3
63.7
40.0
46.6
3.58
3.79
73.5
76.6
81.7
84.2
4.89
4.51
64.7
68.7
116.4
104.3
118.5
105.9
119.6
106.7
118.2
105.6
120.3
107.2
121.4
108.0
4.59
5.12
4.73
5.28
4.80
5.36
4.71
5.25
4.84
5.40
4.90
5.47
9.2
3.96
4.19
1470
2050
1470
2050
1470
2050
1470
2050
1470
2050
1470
2050
4.70
4.34
4.77
4.41
4.81
4.45
38.9
45.3
6.0
6.2
5.5
5.8
5.1
5.3
6.6
6.9
6.2
6.4
5.7
5.9
73.6
75.9
77.0
79.4
78.8
81.3
57.9
60.2
15.9
15.6
17.6
17.3
18.5
18.2
14.6
14.4
16.3
16.0
17.1
16.8
1320
1825
1320
1825
1320
1825
56.2
58.4
58.5
60.8
59.7
62.1
38.3
44.5
39.1
45.5
39.5
46.0
4.17
4.41
3.89
4.12
3.76
3.98
70.4
73.4
71.8
74.9
72.5
75.6
13.5
13.2
15.0
14.8
15.9
15.6
7.3
7.6
6.8
7.0
6.2
6.5
1470
2050
1470
2050
1470
2050
79.4
81.9
82.8
85.4
84.5
87.1
4.83
4.46
4.91
4.54
4.96
4.58
62.7
66.6
65.7
69.8
67.2
71.4
120.0
107.0
122.2
108.6
123.2
109.4
4.82
5.38
4.94
5.51
5.00
5.57
9.8
1320
1825
1320
1825
1320
1825
52.4
54.5
54.8
57.0
56.0
58.3
37.0
43.1
37.8
44.0
38.2
44.5
4.64
4.91
4.33
4.58
4.18
4.42
68.3
71.3
69.6
72.6
70.3
73.4
11.3
11.1
12.7
12.4
13.4
13.2
8.9
9.2
8.2
8.5
7.5
7.8
1320
1825
1320
1825
1320
1825
48.6
50.5
50.9
53.0
52.2
54.2
35.8
41.6
36.5
42.5
36.9
43.0
5.20
5.50
4.85
5.13
4.68
4.95
66.5
69.4
67.6
70.5
68.2
71.1
9.3
9.2
10.5
10.3
11.2
11.0
10.6
11.0
9.8
10.2
9.0
9.4
1320
1825
1320
1825
1320
1825
45.1
46.9
47.2
49.1
48.3
50.2
34.8
40.5
35.4
41.1
35.7
41.5
5.85
6.19
5.45
5.76
5.25
5.56
65.3
68.1
65.9
68.8
66.4
69.2
7.7
7.6
8.7
8.5
9.2
9.0
12.6
13.1
11.6
12.1
10.7
11.1
4.8
5.5
4.8
5.5
4.8
5.4
6.3
5.4
6.3
5.4
6.1
7.1
6.1
7.0
6.1
6.7
7.8
6.7
7.8
6.7
7.3
8.5
7.3
8.5
7.3
7.9
9.1
7.9
9.1
7.8
9.5
8.1
9.5
8.1
9.4
8.1
8.4
9.8
8.4
9.8
8.4
Operation not recommended
Interpolation is permissable; extrapolation is not.
Rev.: 03/16/05D
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 23
Performance Data — Tranquility 20™ Model 070 - PSC Motor
2,100 CFM Nomimal (Rated) Airflow Cooling, 2,100 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
GPM
EWT °F
Airflow
TC
SC
kW
PSI
FT
CFM
8.3
2.7
6.2
12.4
5.9
13.6
16.5
9.1
21.0
8.3
2.4
5.5
12.4
5.2
12.0
16.5
8.0
18.5
8.3
2.2
5.1
12.4
4.9
11.3
16.5
7.5
17.3
8.3
2.0
4.6
12.4
4.5
10.4
16.5
7.0
16.2
8.3
1.7
3.9
12.4
4.0
9.2
16.5
6.4
14.8
8.3
1.7
3.9
12.4
4.0
9.2
16.5
6.3
14.6
8.3
1.6
3.7
12.4
3.8
8.8
16.5
6.1
14.1
8.3
1.6
3.7
12.4
3.8
8.7
16.5
6.0
13.9
8.3
1.6
3.7
12.4
3.7
8.5
16.5
5.9
13.6
8.3
1.5
3.5
12.4
3.5
8.1
16.5
5.6
12.9
8.3
1.4
3.2
12.4
3.3
7.6
16.5
5.3
12.2
8.3
1.3
3.0
12.4
3.2
7.4
16.5
5.1
11.8
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
1575
2100
47.0
48.3
5.12
4.68
30.6
32.5
97.6
91.3
2.69
3.02
5.3
70.1
73.0
71.0
73.9
71.5
74.5
40.6
48.7
40.9
49.0
41.1
49.2
3.14
3.24
3.01
3.11
2.96
3.05
80.8
84.0
81.2
84.5
81.6
84.9
22.3
22.5
23.6
23.7
24.2
24.4
-
1575
2100
1575
2100
1575
2100
50.7
52.1
52.8
54.2
53.9
55.4
5.21
4.77
5.26
4.81
5.28
4.83
33.9
36.0
35.8
37.9
36.8
39.0
99.8
93.0
101.0
93.9
101.7
94.4
2.85
3.20
2.94
3.30
2.99
3.36
6.2
1575
2100
1575
2100
1575
2100
75.2
78.3
75.7
78.9
76.0
79.2
44.0
52.7
44.1
52.9
44.2
52.9
3.37
3.48
3.23
3.33
3.15
3.26
86.7
90.2
86.7
90.2
86.7
90.2
22.3
22.5
23.5
23.7
24.1
24.3
-
1575
2100
1575
2100
1575
2100
57.6
59.2
60.4
62.0
61.9
63.6
5.36
4.91
5.42
4.96
5.46
4.99
40.1
42.6
42.6
45.2
44.0
46.7
103.9
96.1
105.5
97.3
106.4
98.0
3.15
3.53
3.26
3.66
3.33
3.74
7.1
1575
2100
1575
2100
1575
2100
76.2
79.4
77.0
80.2
77.4
80.6
45.4
54.4
45.4
54.4
45.5
54.5
3.72
3.85
3.50
3.62
3.40
3.51
88.9
92.5
89.0
92.5
89.0
92.5
20.5
20.6
22.0
22.2
22.8
22.9
3.6
3.8
3.4
3.5
3.1
3.2
1575
2100
1575
2100
1575
2100
65.2
67.0
68.7
70.5
70.6
72.5
5.52
5.05
5.60
5.12
5.64
5.15
47.0
49.9
50.1
53.2
51.8
55.0
108.4
99.5
110.4
101.1
111.5
102.0
3.46
3.89
3.60
4.04
3.67
4.12
7.9
1575
2100
1575
2100
1575
2100
73.6
76.6
75.7
78.8
76.4
79.6
44.9
53.8
45.5
54.5
45.7
54.7
4.09
4.22
3.82
3.95
3.70
3.82
87.5
91.0
88.7
92.2
89.1
92.6
18.0
18.1
19.8
20.0
20.7
20.8
4.4
4.6
4.1
4.2
3.8
3.9
1575
2100
1575
2100
1575
2100
73.3
75.2
77.4
79.4
79.7
81.8
5.69
5.21
5.78
5.29
5.83
5.33
54.2
57.5
57.9
61.5
60.0
63.6
113.1
103.2
115.5
105.0
116.8
106.1
3.77
4.24
3.92
4.40
4.00
4.50
8.8
1575
2100
1575
2100
1575
2100
69.9
72.8
72.6
75.7
73.9
76.9
43.6
52.3
44.6
53.4
45.0
53.9
4.50
4.65
4.19
4.34
4.05
4.19
85.3
88.7
87.0
90.4
87.7
91.2
15.5
15.7
17.3
17.5
18.2
18.4
5.4
5.6
5.0
5.2
4.6
4.8
1575
2100
1575
2100
1575
2100
81.5
83.6
86.1
88.4
88.7
91.0
5.87
5.37
5.98
5.47
6.04
5.52
61.6
65.3
65.8
69.8
68.0
72.2
117.9
106.9
120.6
109.0
122.1
110.1
4.07
4.57
4.22
4.74
4.30
4.83
9.6
1575
2100
1575
2100
1575
2100
1575
2100
1575
2100
1575
2100
65.7
68.4
68.7
71.6
70.2
73.1
42.0
50.3
43.2
51.7
43.7
52.4
4.97
5.14
4.63
4.79
4.47
4.62
82.7
86.0
84.5
87.9
85.4
88.8
68.9
73.1
73.3
77.8
75.7
80.3
81.4
84.7
93.5
96.0
6.16
5.63
72.3
76.8
66.5
69.3
42.3
50.6
4.88
5.05
83.2
86.5
98.6
101.2
6.30
5.76
76.8
81.5
68.0
70.9
42.9
51.4
4.71
4.87
84.1
87.5
101.3
104.0
6.38
5.83
79.2
84.0
122.7
110.6
125.6
112.8
127.2
114.1
125.0
112.3
128.0
114.6
129.5
115.8
4.33
4.87
4.48
5.03
4.56
5.12
4.45
4.99
4.59
5.15
4.65
5.22
10.3
5.24
5.42
1575
2100
1575
2100
1575
2100
1575
2100
1575
2100
1575
2100
6.06
5.54
6.19
5.66
6.26
5.72
41.1
49.2
6.7
6.9
6.2
6.4
5.7
5.9
7.4
7.7
6.8
7.1
6.3
6.6
89.6
92.0
94.6
97.2
97.3
99.9
63.5
66.2
13.2
13.3
14.8
15.0
15.7
15.8
12.1
12.2
13.6
13.7
14.4
14.5
1575
2100
1575
2100
1575
2100
61.3
63.9
64.3
67.0
65.9
68.6
40.2
48.1
41.4
49.6
42.0
50.3
5.52
5.70
5.14
5.31
4.95
5.12
80.2
83.4
81.9
85.1
82.8
86.1
11.1
11.2
12.5
12.6
13.3
13.4
8.1
8.5
7.5
7.8
6.9
7.2
1575
2100
1575
2100
1575
2100
97.4
100.0
102.6
105.3
105.2
108.0
6.26
5.73
6.42
5.87
6.50
5.94
75.8
80.4
80.3
85.2
82.6
87.7
127.3
114.1
130.3
116.4
131.9
117.6
4.56
5.12
4.69
5.26
4.74
5.33
11.0
1575
2100
1575
2100
1575
2100
57.1
59.5
59.9
62.3
61.3
63.9
38.4
46.0
39.5
47.4
40.2
48.1
6.15
6.36
5.72
5.91
5.52
5.70
78.1
81.3
79.4
82.6
80.2
83.4
9.3
9.4
10.5
10.5
11.1
11.2
9.9
10.3
9.1
9.5
8.4
8.7
1575
2100
1575
2100
1575
2100
53.5
55.8
55.8
58.1
57.0
59.4
37.1
44.4
37.9
45.4
38.4
46.0
6.89
7.12
6.40
6.61
6.17
6.38
77.1
80.2
77.6
80.7
78.1
81.2
7.8
7.8
8.7
8.8
9.2
9.3
11.8
12.3
10.9
11.4
10.1
10.5
1575
2100
1575
2100
1575
2100
51.1
53.2
52.5
54.7
53.4
55.6
36.5
43.7
36.7
44.0
37.0
44.3
7.75
8.01
7.18
7.42
6.92
7.15
77.6
80.7
77.0
80.1
77.1
80.1
6.6
6.6
7.3
7.4
7.7
7.8
14.0
14.6
13.0
13.5
11.9
12.4
5.3
6.2
5.3
6.2
5.3
6.1
7.1
6.1
7.1
6.1
6.8
7.9
6.8
7.9
6.8
7.5
8.7
7.5
8.7
7.5
8.2
9.5
8.2
9.5
8.2
8.9
10.3
8.8
10.3
8.8
10.7
9.2
10.7
9.2
10.6
9.1
9.5
11.0
9.5
11.0
9.4
Operation not recommended
Interpolation is permissable; extrapolation is not.
Rev.: 03/16/05D
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Page 24
4.5
1575
2100
1575
2100
1575
2100
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Performance Data — Tranquility 20™ Model 070 - ECM Motor
1,950 CFM Nomimal (Rated) Airflow Cooling, 2,100 CFM Nominal (Rated) Airflow Heating
COOLING - EAT 80/67 °F
WPD
GPM
EWT °F
Airflow
TC
SC
kW
PSI
FT
CFM
8.3
2.7
6.2
12.4
5.9
13.6
16.5
9.1
21.0
8.3
2.4
5.5
12.4
5.2
12.0
16.5
8.0
18.5
8.3
2.2
5.1
12.4
4.9
11.3
16.5
7.5
17.3
8.3
2.0
4.6
12.4
4.5
10.4
16.5
7.0
16.2
8.3
1.7
3.9
12.4
4.0
9.2
16.5
6.4
14.8
8.3
1.7
3.9
12.4
4.0
9.2
16.5
6.3
14.6
8.3
1.6
3.7
12.4
3.8
8.8
16.5
6.1
14.1
8.3
1.6
3.7
12.4
3.8
8.7
16.5
6.0
13.9
8.3
1.6
3.7
12.4
3.7
8.5
16.5
5.9
13.6
8.3
1.5
3.5
12.4
3.5
8.1
16.5
5.6
12.9
8.3
1.4
3.2
12.4
3.3
7.6
16.5
5.3
12.2
8.3
1.3
3.0
12.4
3.2
7.4
16.5
5.1
11.8
Performance capacities shown in thousands of Btuh
HEATING - EAT 70 °F
HR
EER
HWC
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
Operation not recommended
20
30
40
50
60
70
80
85
90
100
110
120
Operation not recommended
1520
2100
46.2
47.6
4.80
4.44
30.7
32.6
98.1
91.0
2.82
3.14
5.2
4.5
1450
1950
1450
1950
1450
1950
73.1
76.0
73.5
76.4
73.8
76.7
42.8
49.8
42.9
49.9
43.0
50.0
2.74
2.90
2.65
2.80
2.59
2.74
82.3
85.8
82.3
85.9
82.4
86.0
26.7
26.2
27.7
27.2
28.5
28.0
-
1520
2100
1520
2100
1520
2100
49.9
51.4
52.0
53.6
53.1
54.8
4.89
4.52
4.94
4.57
4.97
4.59
34.0
36.1
35.9
38.1
36.9
39.2
100.4
92.7
101.6
93.6
102.4
94.1
2.99
3.33
3.08
3.44
3.13
3.50
6.2
1450
1950
1450
1950
1450
1950
77.1
80.2
77.4
80.5
77.6
80.7
45.3
52.7
45.3
52.7
45.3
52.7
2.94
3.11
2.87
3.03
2.80
2.97
87.0
90.7
87.0
90.7
87.0
90.7
26.3
25.8
27.0
26.5
27.7
27.2
-
1520
2100
1520
2100
1520
2100
56.8
58.6
59.6
61.4
61.1
63.0
5.05
4.67
5.11
4.72
5.14
4.75
40.2
42.8
42.7
45.4
44.1
46.9
104.6
95.8
106.3
97.1
107.2
97.8
3.30
3.68
3.42
3.81
3.48
3.89
7.0
1450
1950
1450
1950
1450
1950
77.2
80.2
78.2
81.3
78.6
81.7
45.8
53.3
45.9
53.5
46.1
53.6
3.37
3.56
3.14
3.32
3.04
3.22
88.5
92.3
88.7
92.5
88.8
92.6
22.9
22.5
24.9
24.5
25.8
25.4
3.7
3.9
3.4
3.6
3.2
3.3
1520
2100
1520
2100
1520
2100
64.4
66.4
67.8
69.9
69.8
71.9
5.21
4.82
5.29
4.88
5.33
4.92
47.1
50.0
50.2
53.3
51.9
55.2
109.2
99.3
111.3
100.8
112.5
101.7
3.62
4.04
3.76
4.20
3.84
4.28
7.9
1450
1950
1450
1950
1450
1950
74.4
77.3
76.6
79.6
77.4
80.5
45.1
52.5
45.7
53.1
45.9
53.4
3.71
3.92
3.45
3.65
3.33
3.52
86.9
90.7
88.2
92.0
88.6
92.4
20.1
19.7
22.2
21.8
23.2
22.8
4.5
4.7
4.2
4.4
3.9
4.0
1520
2100
1520
2100
1520
2100
72.4
74.6
76.4
78.8
78.7
81.1
5.38
4.97
5.47
5.06
5.52
5.10
54.3
57.7
57.9
61.6
60.0
63.7
114.1
102.9
116.6
104.7
117.9
105.8
3.94
4.40
4.09
4.57
4.18
4.66
8.7
1450
1950
1450
1950
1450
1950
70.7
73.5
73.5
76.4
74.7
77.7
44.0
51.2
44.8
52.1
45.2
52.6
4.10
4.34
3.81
4.03
3.68
3.89
84.7
88.3
86.4
90.1
87.1
90.9
17.2
16.9
19.3
18.9
20.3
20.0
5.6
5.8
5.2
5.4
4.7
4.9
1520
2100
1520
2100
1520
2100
80.4
82.9
85.0
87.7
87.5
90.2
5.56
5.14
5.67
5.24
5.73
5.30
61.5
65.4
65.7
69.8
67.9
72.1
119.0
106.6
121.8
108.7
123.3
109.8
4.24
4.73
4.39
4.90
4.47
4.99
9.4
1450
1950
1450
1950
1450
1950
1450
1950
1450
1950
1450
1950
66.6
69.2
69.5
72.3
71.0
73.8
42.5
49.5
43.6
50.7
44.0
51.2
4.56
4.82
4.23
4.48
4.08
4.31
82.1
85.7
83.9
87.5
84.8
88.5
68.7
73.0
73.0
77.6
75.3
80.1
80.9
84.4
92.3
95.1
5.86
5.42
72.1
76.6
67.4
70.0
42.8
49.8
4.48
4.74
82.6
86.2
97.2
100.2
6.01
5.55
76.4
81.2
68.8
71.6
43.3
50.4
4.31
4.56
83.5
87.1
99.8
102.9
6.09
5.63
78.6
83.6
123.9
110.2
126.9
112.4
128.5
113.6
126.2
111.9
129.2
114.2
130.8
115.4
4.50
5.02
4.65
5.18
4.71
5.26
4.61
5.15
4.74
5.29
4.80
5.35
10.2
4.82
5.10
1520
2100
1520
2100
1520
2100
1520
2100
1520
2100
1520
2100
5.76
5.32
5.89
5.44
5.97
5.51
41.7
48.5
6.9
7.1
6.3
6.6
5.8
6.1
7.6
7.9
7.1
7.3
6.5
6.8
88.4
91.2
93.3
96.2
96.0
98.9
64.4
67.0
14.6
14.3
16.4
16.1
17.4
17.1
13.4
13.1
15.0
14.8
16.0
15.7
1450
1950
1450
1950
1450
1950
62.3
64.8
65.2
67.8
66.7
69.3
40.8
47.5
42.0
48.8
42.5
49.5
5.09
5.38
4.72
4.99
4.55
4.81
79.7
83.2
81.3
84.8
82.2
85.8
12.2
12.0
13.8
13.6
14.7
14.4
8.4
8.7
7.8
8.1
7.1
7.4
1520
2100
1520
2100
1520
2100
96.1
99.1
101.1
104.2
103.6
106.8
5.97
5.52
6.13
5.66
6.22
5.75
75.5
80.2
79.8
84.8
82.0
87.1
128.5
113.7
131.6
115.9
133.1
117.1
4.72
5.26
4.83
5.39
4.88
5.45
10.9
1450
1950
1450
1950
1450
1950
58.3
60.6
60.9
63.3
62.3
64.8
39.0
45.4
40.2
46.8
40.8
47.5
5.70
6.03
5.29
5.59
5.09
5.38
77.9
81.2
79.0
82.4
79.7
83.2
10.2
10.0
11.5
11.3
12.2
12.0
10.2
10.6
9.4
9.8
8.7
9.0
1450
1950
1450
1950
1450
1950
54.9
37.4
6.42
77.0
57.1
57.0
59.2
58.2
60.5
43.5
38.4
44.7
39.0
45.4
6.79
5.94
6.29
5.72
6.05
80.4
77.4
80.8
77.8
81.2
8.6
8.4
9.6
9.4
10.2
10.0
12.7
11.3
11.7
10.4
10.8
1450
1950
1450
1950
1450
1950
52.8
54.9
54.0
56.1
54.8
57.0
36.2
42.1
36.9
42.9
37.3
43.5
7.02
7.42
6.71
7.09
6.49
6.86
77.0
80.3
77.1
80.4
77.2
80.5
7.5
7.4
8.0
7.9
8.5
8.3
14.5
15.1
13.4
13.9
12.3
12.8
5.3
6.1
5.3
6.1
5.3
6.0
7.0
6.0
7.0
6.0
6.8
7.8
6.7
7.8
6.7
7.4
8.6
7.4
8.6
7.4
8.1
9.4
8.1
9.4
8.1
8.8
10.2
8.7
10.1
8.7
10.5
9.1
10.5
9.0
10.5
9.0
9.4
10.9
9.3
10.8
9.3
12.2
Operation not recommended
Interpolation is permissable; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating. ARI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for ARI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Operation below 40°F EWT is based upon a 15% antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit (standard on residential models).
See performance correction tables for operating conditions other than those listed above.
"-" HWG operation is limited by a discharge temperature switch.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Rev.: 03/16/05D
Page 25
Dimensions — Vertical Upflow Tranquility 20™
Vertical
in.
22.4
25.6
44.6
2.1
10.0
3
F
HWG
In
13.9
cm.
56.8
65.1
123.2
5.2
25.4
35.2
42.9
A
B
C
Width Depth Height
018
024 030
036
Water Connections
Overall Cabinet
Upflow
Model
1
D
2
E
In
Out
4
5
G
H
HWG CondOut ensate
16.9
7.8
19.8
in.
22.4
25.6
48.5
2.1
10.0
13.9
16.9
7.8
cm.
56.8
65.1
123.2
5.2
25.4
35.2
42.9
19.8
in.
25.4
30.6
50.5
3.4
10.8
15.6
18.9
7.8
cm.
64.5
77.8
128.3
8.6
27.5
39.7
47.9
19.8
042 048
in.
25.4
30.6
54.5
3.4
10.8
15.6
18.9
7.8
cm.
64.5
77.8
138.4
8.6
27.5
39.7
47.9
19.8
060 070
in.
25.4
30.6
58.5
3.4
10.8
15.6
18.9
7.8
cm.
64.5
77.8
148.6
8.6
27.5
39.7
47.9
19.8
Electrical Knockouts
Loop
Water
IPT
HWG
IPT
1" Swivel 1" Swivel
J
1/2" cond
Low
Voltage
3.6
K
1/2" cond
Ext
Pump
6.1
9.2
15.6
1" Swivel 1" Swivel
1" Swivel 1" Swivel
1" Swivel 1" Swivel
1" Swivel 1" Swivel
Discharge Connection
Return Connection
L
duct flange installed (+/- 0.10 in, +/- 2.5mm)
3/4" cond
M
N
O
P
Q
Power
(LH rtrn)
Supply
Supply (RH rtrn)
Supply
Width
Depth
8.6
7.2
5.8
14.0
14.0
4.9
21.9
18.3
14.8
35.6
35.6
12.4
std. deluxe filter rack (+/- 0.10 in, +/- 2.5mm)
R
1.7
S
Return
Depth
22.2
T
Return
Height
26.2
U
1.5
4.2
56.4
66.4
3.9
3.6
6.1
8.6
7.2
5.8
14.0
14.0
4.9
1.7
22.2
26.2
1.5
9.2
15.6
21.9
18.3
14.8
35.6
35.6
12.4
4.2
56.4
66.4
3.9
3.6
6.1
8.6
6.4
6.3
18.0
18.0
5.3
2.1
27.1
26.1
1.5
9.2
15.6
21.9
16.1
16.0
45.7
45.7
13.5
5.4
68.9
66.4
3.9
3.6
6.1
8.6
6.4
6.3
18.0
18.0
5.3
2.1
27.1
30.1
1.5
9.2
15.6
21.9
16.1
16.0
45.7
45.7
13.5
5.4
68.9
76.5
3.9
3.6
6.1
8.6
6.4
6.3
18.0
18.0
5.3
2.1
27.1
34.1
1.5
9.2
15.6
21.9
16.1
16.0
45.7
45.7
13.5
5.4
68.9
86.7
3.9
Condensate is 3/4" PVC glue socket and is switchable from front to side.
Unit shipped with deluxe duct collar/filter rack extending from unit 3" (7.6cm) and is suitable for duct connection.
Discharge flange field installed.
Rev. 02/25/05D
Field Installed
Discharge Flange
Access Panels
Deluxe Filter Bracket
Legend
CAP=Control Access Panel
CSP=Compressor Service Panel
BSP=Blower Service Panel
ASP=Alternate Service Panel
N
ASP
P
BSP
Front
O
Air Coil
B
N
Front
P
O
ASP
CSP
Q
Air Coil Side
Air Coil Side
Top View-Right Return
Top View-Left Return
S
R
R
U
(right
Opposite)
CAP
M
S
2' (61cm)
Service
Isometric
View
1.00 [25.4 mm]
U
Air Coil
T
2' (61cm)
Service
Access *
Left Rtn
A
Air Coil
Residential
Filter Rack
Shown
T
Residential
Filter Rack
Shown
1.68 [42.7 mm]
C
C
Condensate
3 / 4" Glue
(PVC Socket)
Power Supply
3 / 4" [19.1mm]
HV Knockout
1 / 2" [12.7mm]
Knockout
CSP
Back
Right Return Right View
- Filter Rack Knife Edge
Front
Back
4
3
2
CSP
Front
CAP
Low Voltage
1 / 2" [12.7mm]
LV Knockout
1.18 [30.0 mm]
ASP
1.63
[41.4 mm]
J K
Left Return Left View
- Filter Rack Knife Edge
L
5
1
D
H
E
F
G
Front-View
* Note: Shaded areas are recommended service areas, not required.
Rev.: 03/15/04B
Page 26
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Dimensions — Vertical Downflow Tranquility 20™
Vertical
in.
22.4
25.6
48.6
2.1
10.0
3
F
HWG
In
13.9
cm.
56.8
65.1
123.4
5.2
25.4
35.2
42.9
9.2
in.
22.4
25.6
52.5
2.1
10.0
13.9
16.9
3.6
cm.
56.8
65.1
133.4
5.2
25.4
35.2
42.9
9.2
in.
25.4
30.6
54.5
3.4
10.8
15.6
18.9
3.6
cm.
64.5
77.8
138.4
8.6
27.5
39.7
47.9
9.2
A
B
C
Width Depth Height
018
024 030
036
Water Connections
Overall Cabinet
Downflow
Model
1
D
2
E
In
Out
4
5
G
H
HWG CondOut ensate
16.9
3.6
042 048
in.
25.4
30.6
58.5
3.4
10.8
15.6
18.9
3.6
cm.
64.5
77.8
148.6
8.6
27.5
39.7
47.9
9.2
060 070
in.
25.4
30.6
62.5
3.4
10.8
15.6
18.9
3.6
cm.
64.5
77.8
158.8
8.6
27.5
39.7
47.9
9.2
Electrical Knockouts
Loop
Water
IPT
HWG
IPT
1" Swivel 1" Swivel
Discharge Connection
Return Connection
J
1/2" cond
Low
Voltage
3.6
K
1/2" cond
Ext
Pump
6.1
9.2
15.6
21.9
17.1
21.4
25.3
23.0
3.9
3.6
6.1
8.6
6.7
8.4
9.9
9.1
9.2
15.6
21.9
17.1
21.4
25.3
3.6
6.1
8.6
7.4
9.0
9.2
15.6
21.9
18.7
22.9
1" Swivel 1" Swivel
1" Swivel 1" Swivel
1" Swivel 1" Swivel
1" Swivel 1" Swivel
L
duct flange installed (+/- 0.10 in, +/- 2.5mm)
3/4" cond
M
N
O
P
Q
Power
(LH rtrn)
Supply
Supply (RH rtrn)
Supply
Width
Depth
8.6
6.7
8.4
9.9
9.1
1.5
std. deluxe filter rack (+/- 0.10 in, +/- 2.5mm)
R
1.7
S
Return
Depth
22.2
T
Return
Height
22.2
21.2
4.2
56.4
56.4
53.9
1.5
1.7
22.2
26.2
21.2
23.0
3.9
4.2
56.4
66.4
53.9
13.1
12.9
1.6
1.7
27.2
26.2
23.2
33.3
32.7
4.1
4.2
69.1
66.4
59.0
3.6
6.1
8.6
7.4
9.0
13.1
12.9
1.6
1.7
27.2
30.2
23.2
9.2
15.6
21.9
18.7
22.9
33.3
32.7
4.1
4.2
69.1
76.6
59.0
3.6
6.1
8.6
7.4
9.0
13.1
12.9
1.6
1.7
27.2
34.2
23.2
9.2
15.6
21.9
18.7
22.9
33.3
32.7
4.1
4.2
69.1
86.8
59.0
Condensate is 3/4" PVC glue socket and is switchable from front to side.
Unit shipped with deluxe duct collar/filter rack extending from unit 3" (7.6cm) and is suitable for duct connection.
Downflow unit does not have discharge flange, and is rated for zero clearance installation.
Rev. 02/25/05D
Deluxe Filter Bracket
Legend
CAP=Control Access Panel
CSP=Compressor Service Panel
BSP=Blower Service Panel
ASP=Alternate Service Panel
P
CSP
ASP
CAP
N
N
U
ASP
P
O
Blower
Opening
O
A
Front
A
Blower
Opening
2’ [61cm] Optional Service
Access Right Rtn
Front
BSP
(left opposite) *
Condensate 3/4”
Q
Glue
M
Air Coil Side
Air Coil Side
B
2’ [61cm] Service
Access *
B
Left Return Discharge
Floor Foot Print
Right Return Discharge
Floor Foot Print
Isometric View
Power Supply
3 / 4” [19.1mm]
HV Knockout
1.1 [27.9mm]
U
ASP
1 / 2” [12.7mm]
Knockout
Low Voltage
1 / 2” [12.7mm]
LV Knockout
CSP
U
1.6 [40.6mm]
L
K
J
CAP
CSP
Air Coil
T
Front
Back
S
R
Right Return Right View
- Filter Rack Knife Edge
Front
Back
R
G
F
E
3
2
D
BSP
Condensate
3 / 4” Glue (Right Return)
T
4
1
Air Coil
C
1.6 [40.6mm]
Condensate
3 / 4” Glue (Left Return)
5
5
H
S
Left Return Left View
- Filter Rack Knife Edge
Front-View
* Note: Shaded areas are recommended service areas, not required.
Rev.: 7/26/04D
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 27
Dimensions — Horizontal Tranquility 20™
Water Connections
Overall Cabinet
Horizontal
Model
A
B
C
Width Depth Height
018
024 030
036
042 048
060 070
1
D
2
E
In
Out
3
F
HWG
In
4
5
G
H
HWG CondOut ensate
in.
22.4
62.2
19.3
2.1
10.0
13.9
16.9
0.6
cm.
in.
56.8
22.4
158.0
62.2
48.9
19.3
5.2
2.1
25.4
10.0
35.2
13.9
42.9
16.9
1.5
0.6
cm.
56.8
158.0
48.9
5.2
25.4
35.2
42.9
1.5
in.
25.4
71.2
21.3
3.4
10.8
15.6
18.9
0.6
cm.
64.5
180.8
54.0
8.6
27.5
39.7
47.9
1.5
in.
25.4
76.2
21.3
3.4
10.8
15.6
18.9
0.6
cm.
64.5
193.5
54.0
8.6
27.5
39.7
47.9
1.5
in.
25.4
81.2
21.3
3.4
10.8
15.6
18.9
0.6
cm.
64.5
206.2
54.0
8.6
27.5
39.7
47.9
1.5
Electrical Knockouts
Loop
Water
IPT
J
1/2" cond
Low
Voltage
HWG
IPT
1" Swivel 1" Swivel
1" Swivel 1" Swivel
1" Swivel 1" Swivel
1" Swivel 1" Swivel
1" Swivel 1" Swivel
K
1/2" cond
Ext
Pump
L
3/4" cond
M
Power
(LH rtrn)
Supply
Discharge Connection
Return Connection
duct flange installed (+/- 0.10 in, +/- 2.5mm)
std. deluxe filter rack (+/- 0.10 in, +/- 2.5mm)
N
O
Supply
Width
P
Supply
Depth
Q
(RH rtrn)
R
S
Return
Depth
T
Return
Height
U
V
3.6
6.1
8.6
5.0
6.8
10.4
9.3
5.0
2.1
28.1
17.3
2.2
1.0
9.2
3.6
15.6
6.1
21.9
8.6
12.7
3.6
17.3
2.0
26.4
12.5
23.6
15.5
12.7
3.6
5.3
2.0
71.4
33.8
43.9
16.2
5.6
2.3
2.5
1.5
9.2
15.6
21.9
9.3
5.1
31.8
39.4
9.2
5.2
85.8
41.0
5.8
3.9
3.4
6.1
8.6
3.1
1.2
19.0
17.5
3.1
1.0
34.8
18.2
3.1
1.5
8.6
15.6
21.9
8.0
3.1
48.3
44.5
8.0
2.6
88.3
46.1
7.8
3.9
3.6
6.1
8.6
3.1
1.2
19.0
17.5
3.1
1.0
39.8
18.2
3.1
1.5
9.2
15.6
21.9
8.0
3.1
48.3
44.5
8.0
2.6
101.0
46.1
7.8
3.9
3.6
6.1
8.6
3.1
1.2
19.0
17.5
3.1
1.0
44.8
18.2
3.1
1.5
9.2
15.6
21.9
8.0
3.1
48.3
44.5
8.0
2.6
113.7
46.1
7.8
Condensate is stainless steel 3/4" IPT.
Unit shipped with deluxe duct collar/filter rack extending from unit 3" (7.6cm) and is suitable for duct connection.
Discharge flange factory installed.
Legend
LEFT RETURN
2’ [61cm] Service
Access *
CSP
Front
Left Return
ASP
Power Supply
3 / 4” [19.1mm] Knockout
1.6 [40.6mm]
1 / 2” [12.7mm]
Knockout
3.25
[82.6mm]
Low Voltage
1 / 2” [12.7mm]
L
Knockout
5
1.6 [40.6mm]
CSP
3.25
[82.6mm]
4
3
G
EF
CAP
H
1
Straight
Discharge
5
D
A
Front-View
Condensate
Back
3 / 4” IPT
Discharge
2’ [61cm] optional
service access *
2
J
H
Front 2’ [61cm] Service
Access *
Right Return
K
Straight
Discharge
RIGHT RETURN
CAP=Control Access Panel
CSP=Compressor Service Panel
BSP=Blower Service Panel
ASP=Alternate Service Panel
2’ [61cm] optional
service access *
Condensate
3 / 4” IPT
Back
Discharge
O
Blower
Outlet
Y
C
018 - 030
036
042, 048
060, 070
X
in.
62.1
71.1
76.1
81.1
Y
cm.
157.7
180.6
193.3
206
in.
24.5
27.5
27.5
27.5
Z
cm.
62.2
69.9
69.9
69.9
in.
20.3
23.3
23.3
23.3
cm.
51.4
59.1
59.1
59.1
Z
C
Air Coil Side
BSP
Model
Front
P
Air Coil Side
Unit Hanger Detail
Q
P
R
Blower
Outlet
O
BSP
Q
R
A
A
X
Right Return Back Discharge
Left Return Back Discharge
P
M
N
Blower
Outlet
ASP
O
BSP
P
BSP
Blower
Outlet
CSP
O
N
Front
Front
M
Left Return Straight Discharge
V
U
S
Air Coil
Air Coil
S
C
Front
B
Left Return Left View
- Filter Rack Knife Edge
Right Return Straight Discharge
1.1 [27.9mm]
CSP
C T
V
U
ASP
T
Front
B
Right Return Right View
- Filter Rack Knife Edge
* Note: Shaded areas are recommended service areas, not required.
Rev.: 07/27/04D
Page 28
3.9
Rev. 02/25/05D
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Electrical Data - Tranquility 20™
Electrical Data - ECM Motor
TS
Model
Volt
Code
Rated
Voltage
Voltage
Min/Max
018
024
030
036
042
048
060
070
G
G
G
G
G
G
G
G
208-230/60/1
208-230/60/1
208-230/60/1
208-230/60/1
208-230/60/1
208-230/60/1
208-230/60/1
208-230/60/1
197/254
197/254
197/254
197/254
197/254
197/254
197/254
197/254
HWG
Pump
FLA
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
Compressor
RLA
6.8
12.8
13.5
14.7
15.4
20.5
26.9
30.1
LRA
38.0
60.0
61.0
72.5
83.0
109.0
145.0
158.0
Qty
1
1
1
1
1
1
1
1
Ext
Loop
FLA
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
Fan
Motor
FLA
4.3
4.3
4.3
4.3
4.3
7.0
7.0
7.0
Total
Unit
FLA
15.5
21.5
22.2
23.4
24.1
31.9
38.3
41.5
Min
Circ
Amp
17.2
24.7
25.5
27.0
27.9
37.0
45.0
49.0
Max
Fuse/
HACR
20
35
35
40
40
50
70
70
Rev.: 02/25/05D
Electrical Data - PSC Motor
TS
Model
Volt
Code
Rated
Voltage
Voltage
Min/Max
018
024
030
036
042
048
060
070
G
G
G
G
G
G
G
G
208-230/60/1
208-230/60/1
208-230/60/1
208-230/60/1
208-230/60/1
208-230/60/1
208-230/60/1
208-230/60/1
197/254
197/254
197/254
197/254
197/254
197/254
197/254
197/254
HWG
Pump
FLA
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
Compressor
RLA
6.8
12.8
13.5
14.7
15.4
20.5
26.9
30.1
LRA
38.0
60.0
61.0
72.5
83.0
109.0
145.0
158.0
Qty
1
1
1
1
1
1
1
1
Ext
Loop
FLA
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
Fan
Motor
FLA
1.0
1.1
1.4
2.1
2.1
3.0
4.9
5.8
Total
Unit
FLA
12.2
18.3
19.3
21.2
21.9
27.9
36.2
40.3
Min
Circ
Amp
13.9
21.5
22.6
24.8
25.7
33.0
42.9
47.8
Max
Fuse/
HACR
20
30
35
35
40
50
60
70
Rev.: 02/25/05D
Physical Data - Tranquility 20™
Model
18
024
030
036
042
048
060
Rotary
Scroll
Scroll
Scroll
Scroll
Scroll
Scroll
Scroll
50 [1.13]
56 [1.59]
58 [1.64]
70 [1.98]
80 [2.27]
80 [2.27]
136 [3.86]
144 [4.08]
Variable/ECM
Variable/ECM
Variable/ECM
Variable/ECM
Variable/ECM
Variable/ECM
Variable/ECM
Variable/ECM
1/2 [373]
1/2 [373]
1/2 [373]
1/2 [373]
1/2 [373]
1 [746]
1 [746]
1 [746]
9x7
[229 x 178]
9x7
[229 x 178]
9x7
[229 x 178]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
PSC Fan Motor (hp) [W]
1/6 [124]
1/5 [149]
1/3 [249]
1/2 [373]
1/2 [373]
3/4 [560]
1 [746]
1 [746]
PSC High Static Fan Motor (hp) [W]
1/5 [149]
1/3 [249]
1/2 [373]
1/2 [373]
3/4 [560]
3/4 [560]
1 [746]
Not Available
9x7
[229 x 178]
9x7
[229 x 178]
9x7
[229 x 178]
10 x 10
[254 x 254]
10 x 10
[254 x 254]
10 x 10
[254 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
1"
24 x 20
[610 x 508]
28 x 20
[711 x 508]
28 x 20
[711 x 508]
28 x 25
[711 x 635]
32 x 25
[813 x 635]
32 x 25
[813 x 635]
36 x 25
[914 x 635]
36 x 25
[914 x 635]
24 x 24
[610 x 610]
28 x 24
[711 x 610]
28 x 24
[711 x 610]
28 x 30
[711 x 762]
2 - 16 x 30
[2 - 406 x 762]
2 - 16 x 30
[2 - 406 x 762]
1 - 16 x 30
1 - 20 x 30
[1 - 406 x 762]
[1 - 508 x 762]
1 - 16 x 30
1 - 20 x 30
[1 - 406 x 762]
[1 - 508 x 762]
Weight - Operating, lbs. [kg]
252 [114]
266 [121]
268 [122]
327 [148]
414 [188]
416 [189]
441 [200]
443 [201]
Weight - Packaged, lbs. [kg]
262 [119]
276 [125]
278 [126]
337 [153]
424 [192]
426 [193]
451 [205]
453 [206]
18 x 27
[457 x 686]
18 x 31
[457 x 787]
18 x 31
[457 x 787]
20 x 35
[508 x 889]
20 x 40
[508 x 1016]
20 x 40
[508 x 1016]
20 x 45
[508 x 1143]
20 x 45
[508 x 1143]
2 - 18 x 18
[2 - 457 x 457]
2 - 18 x 18
[2 - 457 x 457]
2 - 18 x 18
[2 - 457 x 457]
1 - 12 x 20
1- 20 x 25
[1 - 305 x 508]
[1 - 508 x 635]
1 - 18 x 20
1 - 20 x 24
[1 - 457 x 508]
[1 - 508 x 610]
1 - 18 x 20
1 - 20 x 24
[1 - 457 x 508]
[1 - 508 x 610]
2 - 20 x 24
[2 - 508 x 610]
2 - 20 x 24
[2 - 508 x 610]
Weight - Operating, lb [kg]
252 [114]
266 [121]
268 [122]
327 [148]
414 [188]
416 [189]
441 [200]
443 [201]
Weight - Packaged, lb [kg]
262 [119]
276 [125]
278 [126]
337 [153]
424 [192]
426 [193]
451 [205]
Compressor (1 each)
Factory Charge R410A (oz) [kg]
070
ECM Fan Motor & Blower
Fan Motor Type
ECM Fan Motor (hp) [W]
ECM Blower Wheel Size (Dia x W) - in. [mm]
PSC Fan Motor & Blower
PSC Blower Wheel Size (Dia x W) - in. [mm]
Water Connection Size
Swivel - Residential Class
HWG Water Connection Size
Swivel - Residential Class
Vertical Upflow/Downflow
Air Coil Dimensions (H x W), in. [mm]
Filter Standard - 2 in. (50.8mm) Pleated MERV 11 (in.) [mm]
Horizontal
Air Coil Dimensions (H x W), in. [mm]
Filter Standard - 2 in. (50.8mm) Pleated MERV 11 (in.) [mm]
453 [206]
Rev.: 02/25/05D
Notes:
All units have spring compressor mountings, TXV expansion devices, and 1/2" [12.2mm] & 3/4" [19.1mm] electrical knockouts.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 29
Tranquility 20™ PSC Blower Performance Data
Airflow in CFM with wet coil and clean air filter.
Model
Rated
Airflow
Minimum
CFM
Fan Spd
0.00
818
706
621
1088
948
823
1373
1178
1029
1599
1327
1123
1852
1540
1272
1972
1589
1242
2608
2347
2142
0.05
820
703
616
1078
942
817
1344
1169
1020
1591
1324
1111
1835
1523
1253
1948
1579
1239
2579
2335
2129
0.10
821
700
611
1068
936
811
1315
1160
1011
1582
1320
1099
1817
1505
1234
1923
1568
1236
2550
2322
2115
0.15
818
701
608
1054
928
804
1290
1144
1001
1569
1319
1088
1796
1474
1234
1890
1559
1233
2533
2304
2104
HI
MED
018
600
450
LO
HI
MED
024
850
600
LO
HI
MED
030
950
750
LO
HI
MED
036
1250
900
LO
HI
MED
042
1400
1050
LO
HI
048
1600
1200
MED
LO
HI
060
1950
1500
MED
LO
HI
070
2100
1800
MED
2485
2472
2459
2442
2282
2272
2261
2253
LO
Gray areas denote ESP where operation is not recommended.
Units factory shipped on medium speed. Other speeds require field selection.
All airflow is shown above at the higher voltage of dual rated (208-230V) units.
Page 30
0.20
815
701
604
1040
920
796
1265
1128
990
1556
1317
1077
1774
1443
1234
1857
1550
1230
2516
2285
2093
2424
2244
Airflow (cfm) at External Static Pressure (in. wg)
0.30
0.35
0.40
0.45
0.50
0.60
794
787
779
751
723
652
688
674
660
642
623
571
600
589
577
570
562
508
1013
995
976
952
927
868
891
877
862
843
824
777
780
766
752
737
721
676
1217
1187
1157
1124
1091 1005
1081
1056 1030
1003
975
900
964
945
925
902
879
812
1531
1482 1432
1386 1340 1180
1258
1229 1199
1159
1119 1012
1041
1018
995
961
927
854
1740
1711
1682
1624 1565 1424
1410
1388 1366
1316 1266 1135
1208
1184
1160
1103
1046
944
1789
1746 1702
1656 1610 1493
1500
1480 1459
1421 1382 1253
1209
1197
1185
1147
1108 1014
2462
2426 2390
2352 2314 2238
2243
2220 2196
2170 2144 2072
2065
2042 2019
1995 1971 1908
2478 2385
2403 2382
2353 2324
2291 2258 2185
2231 2218
2201 2183
2152 2120 2079
0.25
805
695
602
1027
906
788
1241
1105
977
1544
1288
1059
1757
1427
1221
1823
1525
1220
2489
2264
2079
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
0.70
585
478
420
802
708
613
912
804
0.80
0.90
707
621
600
1070
907
913
1284
958
866
1317
1089
990
2148
1992
1842
2277
2121
2009
1.00
795
1088
936
2054
1900
1780
2182
2018
1926
1985
1838
1710
2064
1917
1839
1869
1737
1627
2002
Rev.: 02/25/05D
Tranquility 20™ ECM Control Features
Air Flow Selection
Air flow selection is accomplished via 3 jumper switches
on the ECM2 control board. Actual airflow is indicated
by the CFM LED with each 100 CFM being represented
by one flash of the LED. Refer to the Tranquility ECM
airflow table for detailed information on air flow choices.
Air flow is automatically maintained (±5%) by the ECM2
motor regardless of external static pressure up to its
maximum output capacity.
ECM2 Control Board Field Selection Jumpers
Dehumidification Jumper - This jumper allows the
selection of dehumidification mode which reduces airflow in
cooling by 25% to increase the moisture removal capacity of
the unit. This mode should not be selected if the ʻHP CFMʼ
is on setting 1.
Fan Speed Selection Jumper ‘HP CFM’ - This jumper
provides a selection of cooling airflow. 4 is the highest
airflow and 1 is the lowest airflow setting.
Fan Speed Selection Jumper ‘DELAY’ - This jumper
provides a selection of heating airflow for the unit. Four (4)
is the highest airflow and 1 is the lowest airflow setting.
Fan Speed Selection Jumper ‘AUX CFM’ - This jumper
provides airflow selection during auxiliary heating. The
auxiliary heat airflow will be the higher of the ʻHP CFMʼ or
ʻAUX CFMʼ settings. Four (4) is the highest airflow and 1 is
the lowest airflow setting.
CFM ADJ Selection Jumper ‘CFM ADJ’ - This jumper is
for factory use and the factory setting is 4.
Note: To achieve full benefit of the ECM blower a 3 Heat
/ 2 Cool ATA32H01 thermostat should be employed. The
first two stages of thermostats call for fan speed changes.
ECM2 Control Board
•
•
•
•
Airflow selection
Dehumidification mode
CFM LED
Thermostat diagnostic
LEDs
Tranquility 20™ ECM Blower Performance Data
Airflow in CFM with wet coil and clean air filter.
Model
018
024
030
036
042
048
060
070
Max ESP
(in wg)
0.5
0.5
0.5
0.5
0.5
0.75
0.75
0.75
Fan Motor
(hp)
1/2
1/2
1/2
1/2
1/2
1
1
1
Cooling Mode
(HP CFM Jumper)
Jumper
Setting
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
Stg 2
750
700
620
530
950
850
730
610
1130
1000
880
750
1400
1250
1080
900
1580
1400
1230
1050
1730
1550
1330
1120
2050
1825
1580
1320
2230
1950
1700
1450
Stg 1
620
570
510
430
780
700
600
500
920
820
720
620
1150
1020
890
740
1290
1150
1000
860
1420
1270
1090
920
1680
1500
1300
1080
1780
1600
1400
1200
Fan
380
350
310
270
470
420
360
300
560
500
440
380
700
630
540
450
790
700
610
530
870
780
670
560
1030
910
790
660
1100
980
850
730
Dehumid Mode
(Dehumid Jumper)
Stg 2
590
550
480
Stg 1
480
450
400
Fan
380
350
310
OPERATION NOT RECOMMENDED
740
660
570
610
540
470
470
420
360
OPERATION NOT RECOMMENDED
880
780
680
720
640
560
560
500
440
OPERATION NOT RECOMMENDED
1090
980
840
900
800
690
700
630
540
OPERATION NOT RECOMMENDED
1230
1100
960
1010
900
790
790
700
610
OPERATION NOT RECOMMENDED
1350
1210
1040
1110
990
850
870
780
670
OPERATION NOT RECOMMENDED
1600
1420
1230
1310
1170
1010
1030
910
790
OPERATION NOT RECOMMENDED
1710
1520
1330
1400
1250
1090
1100
980
850
OPERATION NOT RECOMMENDED
Heating Mode
(DELAY Jumper)
Stg 2
750
700
620
530
1060
950
820
690
1230
1100
980
850
1400
1250
1080
900
1580
1400
1230
1050
1850
1650
1430
1200
2280
2050
1750
1470
2230
2100
1840
1520
Stg 1
620
570
510
430
870
780
670
570
1000
900
800
700
1150
1020
890
740
1290
1150
1000
860
1520
1350
1180
980
1870
1680
1430
1210
1780
1680
1470
1220
Fan
380
350
310
270
470
420
360
300
560
500
440
380
700
630
540
450
790
700
610
530
870
780
670
560
1030
910
790
660
1100
980
850
730
AUX CFM
Jumper
Setting
Bold numbers indicate factory settings.
During Auxiliary operation the CFM will run at the higher of the Heating (Delay jumper) or AUX settings.
Airflow is controlled within 5% up to the Max ESP shown with wet coil.
Do not select Dehumidification mode if HP CFM is on setting 1.
All units ARI/ISO/ASHRAE 13256-1 rated HP CFM Setting 3.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Aux
Emerg
Mode
4
750
3
700
2
650
1
650
4
1060
3
950
2
820
1
690
4
1230
3
1100
2
980
1
850
4
1400
3
1350
2
1350
1
1350
4
1580
3
1400
2
1350
1
1350
4
1850
3
1650
2
1430
1
1350
4
2280
3
2050
2
1750
1
1470
4
2230
3
2100
2
1840
1
1520
Rev.: 01/09/05JH
Page 31
Thermostat Features and Wiring
ATA32H01 Auto Changeover 3 heat/2 cool thermostat wiring with Tranquility 20™ unit and optional ECM2 motor.
This thermostat is required for the ECM2 fan option allowing two stage fan operation.
ECM2 Board
Tranquility Unit
Compressor
solenoid
Y2
Y
Y1
Y1
W
W1
W3
FACTORY WIRED
Y2
O
G
R
C
AL1
Note:
ATA32H01
A
E
O
O/B
G
G
R
R
C
C
L
X1
or L
- E & W3 must be jumpered
- “G” must be wired to insure fan operation during
electric heat operation.
Rev.: 04/04/04b
ATA21H01 Auto Changeover 2 heat/ 1 cool thermostat wiring with Tranquility 20™ unit and standard PSC fan motor.
Unit
ATA21H01
Y1
Y
W1
W
W2
E
O
O/B
G
G
R
R
C
C
AL1
X1
Note: Y1 & W1 must be jumpered.
E & W2 must be jumpered.
Page 32
Rev. 5/16/00M
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Tranquility 20™ CXM Control Features
Features
• Anti-short Cycle Protection
• High And Low Pressure Cutouts
• Water Coil Freeze Protection
• Air Coil Freeze Protection
• Random Start
• Unit Performance Sentinel
• Over/Under
Voltage Protection
• Diagnostic LED
• Reset Lockout at Unit
or Disconnect
• Intelligent Reset
• Condensate Overflow Sensor
• Test Mode
• Electric Heat Outputs
• Accessory Water Valve Connection
• Optional Lonworks & MPC DDC Controls
Field Selectable Inputs
Test Mode - Test Mode allows the service personnel to
check the operation of the control in a timely manner. By
momentarily shorting the test terminals, the CXM control
enters a 20 minute Test Mode period in which all time
delays are sped up 15 times. Upon entering Test Mode, the
Status LED will flash a code representing the last fault.
For Diagnostic ease at the thermostat, the alarm relay will
also cycle during test mode. The Alarm relay will cycle
on and off, similar to the status LED, to indicate a code
representing the last fault, at the thermostat. Test mode can
be exited by shorting the test terminals for 3 seconds.
Retry Mode - If the control is attempting a retry of a fault,
the status LED will slow flash (slow flash=one flash every 2
seconds) to indicate the control is in process of retrying.
Note: In the following field configuration options,
jumper wires should be clipped ONLY when power is
removed from the CXM control.
Water Coil Freeze Protection Limit Setting - Jumper
2 (JW2-F12 Low Temp) provides field selection of
temperature limit setting for FP1 to be 30°F or 10°F.
Not Clipped=30°F. Clipped=10°F.
Air Coil Freeze Protection Limit Setting - Jumper 3 (JW3FP2 Low Temp) provides field selection of temperature limit
setting for FP2 to be 30°F or 10°F.
Not Clipped=30°F. Clipped=10°F.
Alarm Relay Setting - Jumper 1 (JW1-AL2 Dry) provides
field selection of Alarm Relay terminal AL2 to be jumpered
to 24Vac or to be dry (no connection).
Not Clipped=AL2 connected to R. Clipped=AL2 dry
contacts (no connection).
DIP Switches
DIP Switch 1: Unit Performance Sentinel Disable provides field selection to disable the UPS feature.
On = Enabled. Off = Disabled.
DIP Switch 2: Stage 2 Selection- provides selection of whether
compressor has an on delay. If set to stage 2, the compressor
will have a 3 second delay before energizing. Also, if set for
stage 2, the alarm relay will NOT cycle during test mode.
Safety Features
The following safety features are provided to protect the
compressor, heat exchangers, wiring, and other components
from damage caused by operation outside of
design conditions.
Anti-Short Cycle Protection- The control
features a 5-minute anti-short cycle protection
for the compressor. Note: The 5 minute antishort cycle also occurs at power up.
Random Start - The control features a random
start upon power up from 5-80 seconds.
Fault Retry - In Fault Retry mode, the Status
LED begins slow flashing to signal that the
control is trying to recover from a fault input.
The CXM control will stage off the outputs
and then “try again” to satisfy the thermostat "Y" input call.
Once the thermostat input calls are satisfied, the control will
continue on as if no fault occurred. If 3 consecutive faults
occur without satisfying the thermostat "Y" input call, then
the control will go to Lockout mode. The last fault causing
the lockout will be stored in memory and can be viewed by
going into test mode.
Lockout - In Lockout mode, the Status LED will begin fast
flashing. The compressor relay is turned off immediately.
Lockout mode can be soft reset via the thermostat “Y” input
or can be hard reset via the disconnect. The last fault causing
the lockout will be stored in memory and can be viewed by
going into test mode.
Lockout with Emergency Heat - While in Lockout mode, if
W becomes active, then Emergency Heat mode will occur.
High Pressure Switch - When the High Pressure Switch
opens due to high refrigerant pressures, the Compressor
relay is de-energized immediately since the High Pressure
Switch is in series with the compressor contactor coil. The
High Pressure Fault recognition is immediate as well.
High Pressure Lockout Code = 2. Example: 2 quick flashes,
10 sec. pause, 2 quick flashes, 10 sec. pause, etc.
Low Pressure Switch - The Low Pressure Switch must be
open and remain open for 30 continuous seconds during
"on" cycle to be recognized as a Low Pressure fault. If
the low pressure switch is open for 30 seconds prior to
compressor power up it will be considered a low pressure
(loss of charge) fault. The Low Pressure Switch input is
bypassed for the initial 60 seconds of a compressor run
cycle. Low Pressure Lockout Code = 3.
Water Coil Freeze Protection (FP1) - The FP1 thermistor
temperature must be below the selected freeze protection
limit setting for 30 continuous seconds during a compressor
run cycle to be recognized as a FP1 fault. The FP1 input
is bypassed for the initial 60 seconds of a compressor run
cycle. FP1 Lockout Code = 4.
Air Coil Freeze Protection (FP2) - The FP2 thermistor
temperature must be below the selected freeze protection
limit setting for 30 continuous seconds during a compressor
run cycle to be recognized as a FP2 fault. The FP2 input
is bypassed for the initial 60 seconds of a compressor run
cycle. FP2 Lockout Code = 5.
On = Stage 1 . Off = Stage 2
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 33
CXM Control Features Continued
Condensate Overflow - The Condensate Overflow sensor
must sense overflow levels for 30 continuous seconds to
be recognized as a CO fault. Condensate Overflow will be
monitored at all times. CO Lockout Code = 6.
Over/Under Voltage Shutdown - An Over/Under Voltage
condition exists when the control voltage is outside the
range of 19Vac to 30Vac. Over/Under Voltage Shutdown is
self-resetting in that if the voltage comes back within range
of 19Vac to 30Vac for at least 0.5 seconds, then normal
operation is restored. This is not considered a fault or
lockout. If the CXM is in over/under voltage shutdown for
15 minutes, the alarm relay will close. Over/Under Voltage
Shutdown Code = 7.
Unit Performance Sentinel-UPS (patent pending) The UPS feature warns when the heat pump is operating
inefficiently. A UPS condition exists when:
a) in heating mode with compressor energized, if FP2
is greater than 125°F for 30 continuous seconds,
or
b) in cooling mode with compressor energized, if FP1 is
greater than 125°F for 30 continuous seconds, OR FP2
is less than 40°F for 30 continuous seconds.
Cooling Stage 2 - To enter Cooling Stage 2 mode, Y2
becomes active (Y already active). This signal goes
directly from the thermostat to the compressor solenoid for
compressor stage two activation. The compressor relay
remains on.
Heating Stage 1 - To enter Heating Stage 1 mode, Y
becomes active. The first time after power-up that there
is a call for compressor, the compressor will follow a 5 to
80 second random start delay. There will also be a 5 min
compressor anti-short cycle protection time as well. After
the random start delay, the compressor relay is energized.
On all subsequent compressor calls, the random start delay
is omitted.
Heating Stage 2 - To enter Heating Stage 2 mode, Y2
becomes active (Y already active). This signal goes
directly from the thermostat to the compressor solenoid for
compressor stage two activation. The compressor relay
remains on.
Heating Stage 3 - To enter Heating Stage 3 mode, W
becomes active (Y already active). The Compressor relay
remains on. EH1 is turned on immediately. With continuing
Heating Stage 2 demand, EH2 will turn on after 10 minutes.
The EH2 will not turn on in heating (or will turn off if
already on) if loop temperature is above approximately 50°F
(FP1 >45°F).
If a UPS condition occurs, the control will immediately go
to UPS warning. The status LED will remain on as if the
control is on Normal mode (see "LED and Alarm Relay
Operation Table"). Outputs of the control, excluding LED
and Alarm Relay, will NOT be affected by UPS. The UPS
Emergency Heat - In Emergency Heat mode, W becomes
condition cannot occur during a compressor off cycle.
active while Y is not active. EH1 is turned on immediately.
During UPS warning, the alarm relay will cycle on and off.
With continuing Emergency Heat demand, EH2 will turn
The cycle rate will be On for 5 seconds, Off for 25 seconds,
on after 5 minutes. The FP1 and FP2 temperatures do not
On for 5 seconds, Off for 25 seconds, etc. Unit Performance
effect emergency heat operation.
Sentinel Warning Code = 8.
Diagnostic Features
The Status LED on the CXM control advises the serviceman
of the current status of the CXM control. The status LED
can display either the current CXM mode or the last fault
memory if in test mode. See Table 1 for a complete listing
of codes.
Table 1 - Status LED Description
Unit Operation Description
Description of Operation
LED
Alarm Relay
PowerUp - The unit will not operate until all the
Normal Mode
On
Open
inputs and safety controls are checked for normal
Normal Mode with UPS Warning
On
Cycle (closed 5 sec., Open 25 sec.)
conditions. Note: The compressor will have a 5
CXM is non-functional
Off
Open
Fault Retry
Slow Flash
Open
minute anti-short cycle delay at power-up.
Standby - In Standby mode, Y and W inputs are not
active. Inputs O and G may be active. Compressor will
be off.
Cooling Stage 1- To enter Cooling mode, Y and O
become active. The first time after power-up that there
is a call for compressor, the compressor will follow a
5 to 80 second random start delay. There will also be
a 5 min compressor anti-short cycle protection time
as well. After the random start delay, the compressor
relay is energized. On all subsequent compressor calls,
the random start delay is omitted.
Page 34
Lockout
Over/Under Voltage Shutdown
Fast Flash
Slow Flash
Closed
Open (Closed after 15 minutes)
Test Mode - No fault in memory
Flashing Code 1
Cycling Code 1
Test Mode - HP Fault in memory
Flashing Code 2
Cycling Code 2
Test Mode - LP Fault in memory
Flashing Code 3
Cycling Code 3
Test Mode - FP1 Fault in memory Flashing Code 4
Cycling Code 4
Test Mode - FP2 Fault in memory Flashing Code 5
Cycling Code 5
Test Mode - CO Fault in memory Flashing Code 6
Cycling Code 6
Test Mode - Over/Under
shutdown in memory
Flashing Code 7
Cycling Code 7
Test Mode - UPS in memory
Flashing Code 8
Cycling Code 8
Test Mode - Swapped Thermistor Flashing Code 9
Cycling Code 9
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Tranquility 20™ ECM Electrical Wiring Diagram - 96B0005N25
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 35
Tranquility 20™ PSC Electrical Wiring Diagram - 96B0005N26
Page 36
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Auxiliary Heat Typical Application
Electric
ElectricHeat
HeatAssembly
Assembly
Auxiliary electric
electric heat
Auxiliary
heat
power supply
supply knockout
power
knockout
opposite
aircoil
coil
opposite air
Air Coil
Coil
Air
Low Voltage
Voltage control
Low
control
harness
is prewired
prewired
harness is
residential
onon
all all
distributor
class
Tranquility
Genesisunits
Auxiliary Heat Ratings
Auxiliary
Electric Heat Model
Model Compatibility (shaded)
018 024 030 036 042 048 060 070
• •
•
•
•
AGM5A
AGM8A
AGM10A
AGM12A
AGL10A
kW Rating (kW)
AGL15A
AGL20A
•
•
•
•
•
• • • • •
• • • • •
• • • •
Btuh Rating (Btuh)
240V
208V
240V
208V
Minimum
CFM
Required
4.8
3.6
16300
12300
500
7.6
5.7
25900
19400
650
9.6
7.2
32700
24600
650
11.4
8.6
38900
29200
750
9.6
7.2
32700
24600
1300
14.4
10.8
49100
36900
1350
19.2
14.4
65500
49200
1350
Rev.: 3/16/05D
" " denotes compatibility
Note: Horizontal units rated for zero clearance and 1" clearance for electric heat and the first three feet of duct
Vertical units rated for zero clearance for both unit and duct.
Auxiliary Heat Electrical Data
Electric Heater
Model
Models
Supply Circuit
AGM5
18, 24, 30
Single
208V
3.6
240V
4.8
208V
21.6
240V
25.0
208V
25
240V
25
AGM8
024, 030
Single
5.7
7.6
34.3
39.6
35
40
AGM10
024. 030
Single
7.2
9.6
43.3
50.0
45
50
Single
8.6
11.4
51.6
59.4
60
60
Dual: L1/L2
5.7
7.6
34.3
39.6
35
40
L3/L4
2.9
3.8
17.4
19.8
20
20
Single
7.2
9.6
43.3
50.0
45
50
Single
10.8
14.4
64.9
75.0
70
80
7.2
9.6
43.3
50.0
45
50
AGM12
024, 030
AGL10
036 - 070
AGL15
036 - 070
AGL20
042 - 070
Dual: L1/L2
Heater Size
kW
Min Circuit Ampacity Max Fuse or Ckt Brkr
L3/L4
3.6
4.8
21.6
25.0
25
25
Single
14.4
19.2
86.5
100.0
90
100
Dual: L1/L2
7.2
9.6
43.3
50.0
45
50
L3/L4
7.2
9.6
43.3
50.0
45
50
Rev.: 3/16/05D
Note: Horizontal units rated for zero clearance and 1" clearance for electric heat and the first three feet of duct
Vertical units rated for zero clearance for both unit and duct.
Maximum Outlet Air Temperature not to exceed 200° F.
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 37
Engineering Guide Specifications
General
The water source heating/cooling units shall be vertical
upflow air discharge. Units shall be ARI/ISO/ASHRAE
13256-1 (ground-source closed-loop) performance certified
and listed by a nationally recognized safety-testing
laboratory or agency, such as the Canadian Standards
Association (CSA US). Each unit shall be water run-tested
at the factory. Each unit shall be pallet mounted and shipped
with appropriate protective packaging to help avoid damage
in transportation. The units shall be warranted by the
manufacturer against defects in materials and workmanship
for a period of five years on all parts, and ten years on the
compressor and refrigerant circuit parts with a service labor
allowance during the first 30 days. An optional extended
warranty is available for the Tranquility 20™ Series units,
which adds a labor allowance and trip charge. The water
source units shall be designed to operate with entering fluid
temperature between 20°F and 120°F.
Casing & Cabinet
The cabinet shall be fabricated from heavy-gauge
galvanized steel and painted with an epoxy powder coating.
The interior shall be insulated with 1/2" thick, multi-density,
coated glass fiber. Insulation in the air handler section
shall be foil backed for ease of cleaning. Three blower
compartment and four compressor compartment access
panels shall be provided and shall be removable with supply
and return ductwork in place. The internal component layout
shall provide for major service with the unit in-place for
restricted access installations.
A duct collar (Field installed) shall be provided on the
supply air opening. 2" high efficiency MERV11 pleated
filters shall be provided with each unit. Units shall have
filter brackets. The units shall have an insulated divider
panel between the air handling section and the compressor
section to minimize the transmission of compressor noise,
and to permit operational service testing without air bypass.
Units shall be supplied with left or right air inlet.
Refrigerant Circuit
All units shall contain EarthPure™ (HFC 410A)
sealed refrigerant circuit employing a hermetic motorcompressor, bidirectional thermal expansion valve,
finned tube air-to-refrigerant heat exchanger, reversing
valve, coaxial tube water-to-refrigerant heat exchanger
and service ports. An optional Hot Water Generator
(desuperheater) coil shall be provided.
Compressors shall be Copeland scroll type (rotary for 018)
designed for heat pump duty and mounted on spring vibration
isolators. Compressor motors shall be single phase PSC with
internal overload protection. A factory installed bidirectional
filter drier shall be provided on all models. The finned tube
coil shall be sized for low-face velocity and constructed
of lanced aluminum fins bonded to rifled copper tubes in a
staggered pattern not less than three rows deep. Entire air coil
surface shall be e-coated for corrosion protection.
The coaxial water-to-refrigerant heat exchangers shall
be designed for close approach temperatures and be
constructed of a convoluted copper (optional cupronickel)
inner tube and a steel outer tube. The thermal expansion
valves shall provide proper superheat over the entire fluid
temperature range with minimal “hunting”. The valve shall
operate bi-directionally without the use of check valves.
Page 38
The water-to-refrigerant heat exchanger, optional
desuperheater coil and refrigerant suction lines shall be
insulated to prevent condensation at low liquid temperatures.
Fan Motor and Blower
The fan shall be a direct drive centrifugal type with a
dynamically balanced wheel. The wheel and housing shall
be designed for quiet, low outlet velocity operation. The
fan housing shall be of galvanized steel construction and
shall be removable from the unit without disconnecting the
supply air ductwork for servicing of the fan motor. The fan
motor shall be of 3-speed permanently split capacitor (PSC)
type. The fan motor shall be high efficiency and provide
high static capability, and shall include three on-motor
selectable air flow options. An optional variable speed
electronically commutated (ECM) fan motor is available
with permanently lubricated ball bearing construction,
and it has no less than four operational speeds online. The
fan motor shall be isolated from the housing by rubber
grommets. The motor shall be permanently lubricated and
have thermal overload protection.
Electrical
CXM Control - A microprocessor-based compressor
controller shall be provided to monitor and control unit
operation. The control shall provide compressor and electric
heater sequencing, high and low pressure monitoring,
field selectable water and air coil freeze protection
sensing, condensate overflow sensing, over/under voltage
monitoring, and unit performance sentinel (UPS). The
control shall also provide for water valve connection, a test
mode, short cycle protection, random start-up, as well as
fault LED, fault memory, and intelligent fault retry.
The control shall employ quick attach harness assemblies
for low voltage connections to the control board to aid in
troubleshooting or replacement. An integral terminal block
with screw terminals shall be provided on the control for all
field low voltage connections. A circuit breaker protected
75VA transformer shall be employed. Line voltage box
lugs shall be provided for unit wiring. Units shall have
knockouts for entrance of low and line voltage wiring. The
fan motor and control box shall be harness plug-connected
for easy removal.
Residential models shall have a dual circut-breaker
protected power block for the connection of external flow
controller pump module.
Piping
Supply and return water connections, as well as Hot Water
Generator (desuperheater) connections shall be 1" IPT
brass swivel fittings which provide a union and eliminate
the need for pipe wrenches and sealants when making field
connections. A thread by sweat fitting shall be provided for
connection to the water heating. All water piping shall be
insulated to prevent condensation at low liquid temperatures.
The condensate connection shall be a 3/4" PVC glue
(socket) with internal-trap (Vertical Models).
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Accessories & Options
Warranty Information
Hot Water Generator
An optional heat reclaiming desuperheater coil of vented
double-wall copper construction suitable for potable water
shall be provided. The coil and hot water circulating pump
shall be factory mounted inside the unit. A high limit and
low compressor discharge line temperature switch shall be
provided to disable the pump when these conditions occur.
Cupro-Nickel Heat Exchanger
An optional corrosion resistant CuNi coaxial heat
exchanger shall be factory installed in lieu of standard
copper construction.
Thermostat (field installed)
A multistage auto-changeover electronic digital thermostat
shall be provided. The thermostat shall offer 3 heating and 2
cooling stages with precise temperature control. An OFFHEAT-AUTO-COOL-EMERG system switch, OFF-AUTO
fan switch, and indicating LEDʼs shall be provided. The
thermostat shall read out in °F or °C. An optional remote
indoor sensor and outdoor sensor shall be available on
some models.
Flow Controller (field installed)
A self-contained module shall provide all fluid pumping,
fill and connection requirements for ground-source closedloop systems up to 20 GPM. The Flow Controller shall
provide 1" pump isolation valves and 3-way service valves.
Pump heads shall be removable from the volute for easy
replacement. The Flow Controller shall be enclosed in a
case and fully insulated with urethane foam to prevent
condensation. The Flow Controller shall have a 5-year
warranty on all parts.
Auxiliary Heater (field installed)
A duct mounted electric heater shall provide supplemental
and/or emergency heating capability when used with the 3
stage heating thermostats.
ClimateMaster Tranquility 20™ Series residential warranty
reflects the reliability built in to every unit and includes
five years on all parts, and ten years on the compressor
and refrigerant circuit parts with a service labor allowance
during the first 30 days. An optional extended warranty is
available for the Tranquility 20™ Series units, which adds
a labor allowance and trip charge. See extended warranty
certificate (RP405) for details.
CLIMATE MASTER, INC.
LIMITED EXPRESS WARRANTY/LIMITATION OF REMEDIES AND LIABILITY FOR
RESIDENTIAL CLASS PRODUCTS WITH LABOR ALLOWANCE
It is expressly understood that unless a statement is specifically identified as a warranty, statements made by Climate Master, Inc. a Delaware corporation, (“CM”) or its representatives, relating to CMʼs products, whether oral, written or
contained in any sales literature, catalog or agreement, are not express warranties and do not form a part of the basis of the bargain, but are merely CMʼs opinion or commendation of CMʼs products.
EXCEPT AS SPECIFICALLY SET FORTH HEREIN, THERE IS NO EXPRESS WARRANTY AS TO ANY OF CM’S PRODUCTS. CM MAKES NO WARRANTY AGAINST LATENT DEFECTS. CM MAKES NO
WARRANTY OF MERCHANTABILITY OF THE GOODS OR OF THE FITNESS OF THE GOODS FOR ANY PARTICULAR PURPOSE.
GRANT OF LIMITED EXPRESS WARRANTY
CM warrants its Residential Class products, purchased and retained in the United States of America and Canada, to be free from defects in material and workmanship under normal use and maintenance as follows: (1) Air conditioning,
heating and/or heat pump units built or sold by CM (“CM Units”) for five (5) years from the Warranty Inception Date (as defined below); (2) Thermostats, auxiliary electric heaters and geothermal pumping modules built or sold by CM,
when installed with CM Units, for five (5) years from the Warranty Inception Date (as defined below); and (3) Sealed refrigerant circuit components of CM Units (which components only include the compressor, refrigerant to air/water
heat exchangers, reversing valve body and refrigerant metering device) for ten (10) years from the Warranty Inception Date (as defined on the reverse side). The “Warranty Inception Date” shall be the date of original unit installation, or
six (6) months from date of unit shipment from CM, whichever comes first.
To make a claim under this warranty, parts must be returned to CM in Oklahoma City, Oklahoma, freight prepaid, no later than ninety (90) days after the date of the failure of the part; if CM determines the part to be defective and within
CMʼs Limited Express Warranty, CM shall, when such part has been either replaced or repaired, return such to a factory recognized distributor, dealer or service organization, F.O.B. CM, Oklahoma City, Oklahoma, freight prepaid. The
warranty on any part repaired or replaced under warranty expires at the end of the original warranty period.
Labor incurred for installation of a new or repaired warranty part by CM authorized service personnel shall be covered by this Limited Warranty only to the extent set forth in the then existing labor allowance schedule provided by CMʼs
Warranty Department; provided, however, actual labor costs are not covered to the extent they exceed the amount allowed under said allowance schedule, or are not specifically provided for in such allowance schedule.
CLIMATE MASTER, INC.
This warranty does not cover and does not apply to: (1) Air filters, fuses, refrigerant, fluids, oil; (2) Products relocated after initial installation; (3) Any portion or component of any system that is not supplied by CM, regardless of the
LIMITED EXPRESS
OF
REMEDIES
AND
FORor defaced; (5) Products on which payment to CM, or to the owner ʼs seller, is in default; (6) Products
cause ofWARRANTY/LIMITATION
the failure of such portion or component; (4) Products
on which
the unit identification
tags LIABILITY
or labels have been removed
subjected to improper or inadequate installation, maintenance, repair, wiring or voltage conditions; (7) Products subjected to accident, misuse, negligence, abuse, fire, flood, lightning, unauthorized alteration, misapplication, contaminated
RESIDENTIAL CLASS
PRODUCTS
or corrosive air
or liquid supply, operation at abnormal air or liquid temperatures or flow rates, or opening of the refrigerant circuit by unqualified personnel; (8) Mold, fungus or bacteria damages; (9) Corrosion or abrasion of the product;
(10) Products supplied by others; (11) Products which have been operated in a manner contrary to CMʼs printed instructions; (12) Products which have insufficient performance as a result of improper system design or improper
It is expressly understood that unless a statement is specifically identified as a warranty,
statements
made
by of
Climate
Master, Inc.
a Delaware
corporation,
(“CM”)
its representatives,
tosame,
CMʼsfor
products,
whether
application,
installation,
or use
CMʼs products;
or (13)
Electricity
or fuel costs,
or any or
increases
or unrealized relating
savings in
any reason
whatsoever.
oral, written or contained in any sales literature, catalog or agreement, are not express warranties and do not form a part of the basis of the bargain, but are merely CMʼs opinion or commendation of CMʼs products.
EXCEPT AS SPECIFICALLY SET FORTH HEREIN, THERE IS NO EXPRESS
WARRANTY
AS TO
ANY OF
CM’Sset
PRODUCTS.
CMisMAKES
NO WARRANTY
AGAINST
LATENT
DEFECTS.
MAKESsupplied by others, or associated labor to repair or replace the same, which is
Except for
the limited labor
allowance
coverage
forth above, CM
not responsible
for: (1) The costs
of any fluids,
refrigerant
or systemCM
components
NO WARRANTY OF MERCHANTABILITY OF THE GOODS OR OF THE
FITNESS
OF THE
GOODSpart
FOR
ANYby
PARTICULAR
PURPOSE.
incurred
as a result
of a defective
covered
CMʼs Limited Express
Warranty; (2) The costs of labor, refrigerant, materials or service incurred in diagnosis and removal of the defective part, or in obtaining and replacing the new or
repaired part; (3) Transportation costs of the defective part from the installation site to CM, or of the return of that part if not covered by CMʼs Limited Express Warranty; or (4) The costs of normal maintenance.
GRANT OF LIMITED EXPRESS WARRANTY
CM warrants its Residential Class products, purchased and retained in the United
States
of America
Canada,
to betofree
defectsClass
in material
andmanufactured
workmanship
normal
and(CM
maintenance
follows:
(1) Air
This
Limited
Express and
Warranty
applies
CMfrom
Residential
products
onunder
or after
June 9,use
2003
Units withasserial
numbers
beginning with E124 and higher), and is not retroactive to any products produced prior
conditioning, heating and/or heat pump units built or sold by CM (“CM Units”)toforJune
five9,(5)
years
from
thewith
Warranty
Inceptionbeginning
Date (as with
defined
below);
(2) Thermostats, auxiliary electric heaters and geothermal pumping
2003
(CM
Units
serial numbers
E123
and lower).
modules built or sold by CM, when installed with CM Units, for five (5) years from the Warranty Inception Date (as defined below); (3) Sealed refrigerant circuit components of CM Units (which components only include
the compressor, refrigerant to air/water heat exchangers, reversing valve body and
refrigerant
metering
device)
for ten (10)
years LIMITED
from the Warranty
Inception
Date
(as defined
below);
and UNIT
(4) Other
accessories
partsAND
builtSERIAL NUMBERS STATED ON THE REVERSE SIDE AND CM SHALL NOT,
CMʼS
LIABILITY
UNDER
THE TERMS
OF THIS
WARRANTY
SHALL
APPLY
ONLY TO
THE CM
BEARING
THE and
MODEL
or sold by CM, which are not supplied under warranty, for one (1) year from theINdate
of EVENT,
shipmentBE
from
CM. The
“Warranty
Inception
shall be the
date of original
unit installation,
or six (6)
months fromHAS
dateBEEN
of unitVALIDATED BY CM IN THE SPACE PROVIDED ON THE REVERSE SIDE.
ANY
LIABLE
UNDER
THE TERMS
OF Date”
THIS LIMITED
WARRANTY
UNLESS
THIS WARRANTY
CERTIFICATE
shipment from CM, whichever comes first.
Limitation: This Limited Express Warranty is given in lieu of all other warranties. If, notwithstanding the disclaimers contained herein, it is determined that other warranties exist, any such express warranty, including without limitation
express
warranties
or any
impliednowarranties
fitness(90)
for particular
and
shall
be iflimited
to the duration
of thetoLimited
Express Warranty.
To make a claim under this warranty, parts must be returned to CM in Oklahomaany
City,
Oklahoma,
freight
prepaid,
later thanofninety
days afterpurpose
the date
ofmerchantability,
the failure of the
part;
CM determines
the part
be
defective and within CMʼs Limited Express Warranty, CM shall, when such part has been either replaced or repaired, return such to a factory recognized distributor, dealer or service organization, F.O.B. CM, Oklahoma City,
OF REMEDIES
Oklahoma, freight prepaid. The warranty on any part repaired or replaced underLIMITATION
warranty expires
at the end of the original warranty period.
In the event of a breach of the Limited Express Warranty, CM will only be obligated at CMʼs option to repair the failed part or unit, or to furnish a new or rebuilt part or unit in exchange for the part or unit which has failed. If after written
notice fluids,
to CMʼsoil;
factory
in Oklahoma
City, after
Oklahoma
each defect, (3)
malfunction
or other
failure, andofa reasonable
byby
CM
to correct the defect, malfunction or other failure, and the remedy fails of its essential purpose,
This warranty does not cover and does not apply to: (1) Air filters, fuses, refrigerant,
(2) Products
relocated
initialofinstallation;
Any portion
or component
any systemnumber
that is of
notattempts
supplied
CM,
the identification
purchase price tags
paid or
to CM
in have
exchange
the return
the sold(5)
good(s).
Saidonrefund
be the to
maximum
of CM. seller,
THIS REMEDY
IS THE SOLE AND EXCLUSIVE REMEDY OF THE BUYER OR
regardless of the cause of the failure of such portion or component; (4) ProductsCM
on shall
whichrefund
the unit
labels
beenfor
removed
or of
defaced;
Products
whichshall
payment
CM, or liability
to the ownerʼs
is
PURCHASER
AGAINST
CM FOR
BREACH
CONTRACT,
FOR
THE BREACH
ANY WARRANTY
OR
FORlightning,
CM’S NEGLIGENCE
in default; (6) Products subjected to improper or inadequate installation, maintenance,
repair, wiring
or voltage
conditions;
(7)OF
Products
subjected
to accident,
misuse,OF
negligence,
abuse, fire,
flood,
unauthorized OR IN STRICT LIABILITY.
alteration, misapplication, contaminated or corrosive air or liquid supply, operation at abnormal air or liquid temperatures or flow rates, or opening of the refrigerant circuit by unqualified personnel; (8) Mold, fungus or
LIMITATION
OF LIABILITY
bacteria damages; (9) Corrosion or abrasion of the product; (10) Products supplied
by others; (11)
Products which have been operated in a manner contrary to CMʼs printed instructions; (12) Products which have insufficient
CM shall or
have
for any damages
CMʼs performance
is delayed
forincreases
any reason
is prevented
to anyinextent
any
event
suchwhatsoever.
as, but not limited to: any war, civil unrest, government restrictions or restraints, strikes, or work
performance as a result of improper system design or improper application, installation,
usenoofliability
CMʼs products;
or (13)ifElectricity
or fuel costs,
or any
or or
unrealized
savings
same,byfor
any
reason
stoppages, fire, flood, accident, shortages of transportation, fuel, material, or labor, acts of God or any other reason beyond the sole control of CM. CM EXPRESSLY DISCLAIMS AND EXCLUDES ANY LIABILITY FOR
CONSEQUENTIAL
INCIDENTAL
DAMAGE
IN CONTRACT,
FOR
BREACH
ANY EXPRESS
ORCMʼs
IN TORT, WHETHER FOR CM’s NEGLIGENCE OR AS STRICT LIABILITY.
CM is not responsible for: (1) The costs of any fluids, refrigerant or system components
supplied by OR
others,
or associated
labor to repair
or replace the
same,
which OF
is incurred
as a resultOR
of IMPLIED
a defectiveWARRANTY,
part covered by
Limited Express Warranty; (2) The costs of labor, refrigerant, materials or service incurred in diagnosis and removal of the defective part, or in obtaining and replacing the new or repaired part; (3) Transportation costs of the
WARRANTY
PERFORMANCE
defective part from the installation site to CM, or of the return of that part if notOBTAINING
covered by CMʼs
Limited Express
Warranty; or (4) The costs of normal maintenance.
Normally, the dealer or service organization who installed the products will provide warranty performance for the owner. Should the installer be unavailable, contact any CM recognized distributor, dealer or service organization. If
assistanceonis or
required
in obtaining
performance,
or call:
This Limited Express Warranty applies to CM Residential Class products manufactured
after June
9, 2003warranty
(CM Units
with serialwrite
numbers
beginning with E124 and higher), and is not retroactive to any products
produced prior to June 9, 2003 (CM Units with serial numbers beginning with E123 and lower).
Climate Master, Inc. • Customer Service • 7300 SW 44th Street • Oklahoma City, Oklahoma 73179 • (405) 745-6000 • e-service@climatemaster.com
Limitation: This Limited Express Warranty is given in lieu of all other warranties. If, notwithstanding the disclaimers contained herein, it is determined that other warranties exist, any such express warranty, including
NOTE:
Somepurpose
states orand
Canadian
provinces do
not be
allow
limitations
how long
an implied
or the limitation or exclusions of consequential or incidental damages, so the foregoing exclusions and limitations may not apply
without limitation any express warranties or any implied warranties of fitness for
particular
merchantability,
shall
limited
to the on
duration
of the
Limitedwarranty
Expresslasts,
Warranty.
to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and from Canadian province to Canadian province.
Rev.: 5/03
LIMITATION OF REMEDIES
Pleaseatrefer
to option
the CMto
Installation,
Manual
for operating
maintenance
instructions.
Part No.: RP405
In the event of a breach of the Limited Express Warranty, CM will only be obligated
CMʼs
repair the Operation
failed partand
or Maintenance
unit, or to furnish
a new
or rebuiltand
part
or unit in exchange
for the part or unit which has failed.
If after written notice to CMʼs factory in Oklahoma City, Oklahoma of each defect, malfunction or other failure, and a reasonable number of attempts by CM to correct the defect, malfunction or other failure, and the remedy
fails of its essential purpose, CM shall refund the purchase price paid to CM in exchange for the return of the sold good(s). Said refund shall be the maximum liability of CM. THIS REMEDY IS THE SOLE AND
EXCLUSIVE REMEDY OF THE BUYER OR PURCHASER AGAINST CM FOR BREACH OF CONTRACT, FOR THE BREACH OF ANY WARRANTY OR FOR CM’S NEGLIGENCE OR IN STRICT
LIABILITY.
LIMITATION OF LIABILITY
CM shall have no liability for any damages if CMʼs performance is delayed for any reason or is prevented to any extent by any event such as, but not limited to: any war, civil unrest, government restrictions or restraints,
strikes, or work stoppages, fire, flood, accident, shortages of transportation, fuel, material, or labor, acts of God or any other reason beyond the sole control of CM. CM EXPRESSLY DISCLAIMS AND EXCLUDES ANY
LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGE IN CONTRACT, FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, OR IN TORT, WHETHER FOR CM’s NEGLIGENCE
OR AS STRICT LIABILITY.
OBTAINING WARRANTY PERFORMANCE
Normally, the dealer or service organization who installed the products will provide warranty performance for the owner. Should the installer be unavailable, contact any CM recognized distributor, dealer or service
organization. If assistance is required in obtaining warranty performance, write or call:
Climate Master, Inc. • Customer Service • 7300 SW 44th Street • Oklahoma City, Oklahoma 73179 • (405) 745-6000 • e-service@climatemaster.com
NOTE: Some states or Canadian provinces do not allow limitations on how long an implied warranty lasts, or the limitation or exclusions of consequential or incidental damages, so the foregoing exclusions and limitations
may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and from Canadian province to Canadian province.
Please refer to the CM Installation, Operation and Maintenance Manual for operating and maintenance instructions.
Rev.: 5/03
Part No.: RP404
Guide Revision Log:
Date
Page #
03/21/05
All
Description
Guide First Published
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
Page 39
Notes:
Page 40
Tranquility 20™ Series — Single-Stage HFC 410A Geothermal Heat Pumps
7300 S.W. 44th Street
Oklahoma City, OK 73179
Phone: (405) 745-6000
Fax: (405) 745-6058
www.climatemaster.com
Locally Available Through:
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice
and may not be as described herein. Please contact ClimateMasterʼs Customer Service Department at 1-405-745-6000 for specific information on the current design and
specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely
ClimateMasterʼs opinion or commendation of its products.
RP423
© ClimateMaster, Inc. 2005
Rev.: 03/24/05D
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising