XenServer 7.0 Release Notes
XenServer 7.0: Release Notes
July 2016
XenServer 7.0: Release Notes
Welcome to XenServer 7.0. This document provides important information about the XenServer 7.0
release.
For frequently asked questions about XenServer, refer to the XenServer 7.0 Technical FAQ.
Documentation may be updated or changed after the initial release. Citrix suggests regularly visiting
the XenServer 7.0 page on Citrix Product Documentation to learn about updates.
Customers can download the latest version of the XenServer 7.0.0 Base Installation ISO from the
XenServer Product Download page.
Note: The XenServer 7.0.0 Base Installation ISO has been reissued on 6 July 2016 to include hotfix
XS70E004. The reissued ISO also contains an updated version of the XenCenter Management
Console (v7.0.1). This version of XenCenter is same as the version available to download on the
XenServer 7.0 Download page and hotfix XS70E001.
New Features and Improvements in XenServer 7.0
XenServer 7.0 introduces enhanced features and functionality for application, desktop and server
virtualization use cases. Major themes for this release are increased configuration limits, ease of
maintenance improvements and features aimed at reducing the total cost of ownership.
Automated Windows VM Driver Updates Enterprise feature
Customers can now use the Windows Update mechanism to install the I/O drivers (PV drivers) that
deliver enhanced storage and network performance.
In order to install I/O drivers using the Microsoft Windows Update mechanism, customers should:




Ensure the host is correctly licensed
Create a new Windows VM using the XenCenter issued with XenServer 7.0
Enable Windows Update within the VM
Ensure the VM has access to the Internet, or that it can connect to a WSUS proxy server
Customers also wishing to install the full Management Agent (required for VM lifecycle operations or
performance monitoring within XenCenter) should install it from the XenServer Tools ISO, or deploy
the management agent MSI file using an MSI installation tool. These files can be found on the
XenServer Tools ISO. After installation, the Management Agent will keep itself up to date, if it has
access to the Internet.
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.
Health Check
Customers are now able to automate the process of uploading Server Status Reports to Citrix Insight
XenServer
6.5: Release Notes
Services and receive notifications in XenCenter regarding the health of their systems, based on CIS-
January
2015
generated
reports.
Intel GVT-g virtual GPU for Windows Enterprise feature
We continue to collaborate with our partners and drive innovation in the virtualized-graphics
domain. Within this release, we showcase Intel’s virtual GPU; a graphics-acceleration solution that
requires no additional hardware:

Uses the Intel Iris Pro functionality on Broadwell processors equipped with the C226 chipset

Utilizes a standard Intel GPU driver, installed within the VM
For additional information, see the Configuring XenServer 7.0 for Graphics guide.
Support for SMB Storage Enterprise feature
XenServer is now able to use SMB1 storage as an SR type.
Customers with existing SMB storage (ubiquitous in many Microsoft environments) can now utilize
SMB as their XenServer SR, and therefore may need no additional storage for their XenServer
environment, enabling significant potential cost savings.
Direct Inspect APIs Enterprise feature
APIs integrated within the Xen hypervisor enable third-party security products to monitor and
protect virtual infrastructures against malicious activity. Through use of memory introspection, IT
admins can protect VMs without any security agents being installed inside the guests.
Bitdefender's GravityZone product is the first example of security vendors integrating with these
APIs.
Improved Performance & Scale
We continue to deliver ever greater performance and scale, enabling customers to realize
economies of scale and processing efficiencies. These include the following enhancements:
Increased Host Memory
Support for up to 5 TB of system memory, accommodating even the largest workloads
Support for up to 1.5 TB of Memory per VM
For memory-hungry VMs2, such as those running databases, we now support up to 1.5 TB of
memory
1
SMB is sometimes referred to as CIFS.
The VM must operate in HVM mode, which includes Linux distributions such as CentOS or RHEL (version 7.0
or higher) or any Windows VM.
2
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.
Improved Dom0 Responsiveness
The responsiveness of Dom0 has been significantly improved when subjected to heavy VM load
XenServer 6.5: Release Notes
Support2015
for 288 CPUs
January
Support for up to 288 logical CPU cores, accommodating even the most powerful servers
Support for 32 vCPUs per VM
Maximum number of virtual CPUs supported per VM has increased to 32
Increased number of VBDs
Maximum number of VBDs per VM has increased to 255
Increased number of VBDs
Maximum number of VBDs per host has increased to 4096
Increased number of VDIs per SR
Maximum number of VDIs per SR has increased to 20000 for file-based SRs (NFS, SMB, EXT) and
1000 for LVM-based SRs
Enhanced Active Directory Support
Delivering improvements for customers with very large numbers of objects within their Active
Directory, including improved login times.
Increased Size of Dom0 Disk Partitions
By moving log files to a larger, separate partition, we enable more detailed logs to be held over a
longer period of time, improving the ability to diagnose issues. Simultaneously, this alleviates
demands on Dom0’s root disk, and avoids potential space issues due to log file disk space
consumption.
Networking and Storage IO
Significantly higher throughput for both Networking and Storage I/O
Simplified Heterogeneous Pool Support
Enables new hosts to be added to existing resource pools, irrespective of the underlying CPU type
(as long as the CPU is from the same vendor family).
VMs can now freely migrate to a host within and across pools, provided that the destination host is
compatible with the host the VM was booted on. These enhanced agilities are delivered without
recourse to any command line expressions and do not require any hosts to be rebooted.
Support for Offline Storage Migration
Enables storage migrations to be undertaken with the VM in a stopped or suspended state, in
addition to migrating the storage of a running VM.
Software-boot-from-iSCSI for Cisco UCS

Enables XenServer to boot from SAN over iSCSI when using Cisco UCS, complementing the
existing FC boot capabilities already supported in XenServer

XenServer can be installed to, booted from and run from a LUN provided by an iSCSI target,
which is specified in the iSCSI Boot Firmware Table (iBFT)
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.

This helps in reducing infrastructure costs by removing the need for expensive Fibre Channel
HBAs
XenServer
6.5: Release Notes
For additional information, see the XenServer 7.0 Installation Guide.
January 2015
Support for Open-FCoE
Supports software FCoE, which can be configured easily using the XenServer installer. Softwarebased FCoE delivers the same benefits as hardware-based FCoE. It alleviates the need for using
expensive HBAs by using less-expensive network adapters, in an entirely software-defined manner.
For more information, see the XenServer 7.0 Administrator's Guide.
This release also supports boot-from-SAN from Open-FCoE and includes an updated installer to
assist with the configuration of Open-FCoE. For additional information, see the XenServer 7.0
Installation Guide.
Support for NFSv4
Adds support for the current version of the NFS standard, in addition to the existing NFSv3 support.
XenCenter Improvements


Customers are now able to initiate SSH console sessions direct from XenCenter
The ‘Install Update’ wizard in XenCenter enables customers to download and extract
updates (hotfixes) from the Citrix Support website and allows them to apply the update to
multiple servers and pools simultaneously.
Platform Improvements
This release also incorporates the following platform improvements:




Support for the latest Intel processors - Intel Broadwell-H, Broadwell-EX and Skylake-S
Includes Xen hypervisor v4.6
Dom0 now uses CentOS v7.2
Support for booting hosts using UEFI
Support for New Guests
Introduction of the following new guests:






Windows Server 2016 Technical Preview3
SLED 11.3
SLED 12, SLED 12 SP1
RHEL, CentOS, Oracle Linux 7.2
Debian Jessie 8
Ubuntu 16.04
XSAVE CPU Instructions
Support for XSAVE AVX and AVX2 instruction set groups.
Advanced Vector Extensions (AVX and AVX2) provide 256-bit register support for the parallel
execution of floating point and integer instructions respectively, the use of which can significantly
3
Windows Server 2016 Technical Preview has been tested with Microsoft's Windows Server 2016 Technical
Preview 5 build. Technical Preview guest operating systems receive limited testing, and must not be enabled
on production systems.
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.
improve the performance of certain arithmetic operations, especially those used in multimedia
applications.
XenServer 6.5: Release Notes
CPU Microcode
Updates
January
2015
CPU vendors issue updated microcode to fix issues in their silicon. XenServer now supports the
application of CPU microcode updates at boot time, and the distribution of newer microcode
through hotfixes.
XenServer Appliance Updates
XenServer 7.0 includes updates to the following XenServer appliances, which can be easily imported
to your XenServer pool:
Workload Balancing Enterprise feature


Introduces host disk Read/Write I/O recommendations for workload optimization to
complement the existing CPU, memory and network load balancing capabilities.
Workload Balancing VPX is now based on 64-bit CentOS 7.2.
XenServer Conversion Manager Enterprise feature


Enables a seamless conversion of VMware virtual machines from vSphere 5.0, 5.5, 5.5 U2
and 6.0 to XenServer 7.0
Includes support for the latest Windows operating systems:
o Windows 7
o Windows 8
o Windows Server 2012
o Windows 10
Tech Preview
Windows Server Containers
Support for Windows Server Containers on Windows Server 2016 Technology Preview VMs
Windows Server 2016 Tech Preview
XenServer 7.0 provides a template that enables the creation of Windows Server 2016 Tech Preview
VMs for non-production use.
Interoperability with Citrix Products
XenServer 7.0 has been extensively tested and is interoperable with Citrix XenDesktop 7.6, 7.7, 7.8
and 7.9.
Localization Support
The localized version of XenCenter (Simplified Chinese and Japanese) is also available in this release.
Installation & Upgrades
Before beginning installation, customers should review the installation procedure and system
requirements detailed in the XenServer 7.0 Installation Guide.
Note: Upgrading from any of the XenServer Technical Preview releases to XenServer 7.0 is
unsupported, and may result in a non-functional host.
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.
Licensing
For information about XenServer 7.0 licensing, see the XenServer 7.0 Licensing FAQ.
XenServer 6.5: Release Notes
January 2015
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.
Advisories and Known Issues
The following6.5:
section
details advisories
XenServer
Release
Notesand minor issues with this release and any workarounds that
can be applied.
January 2015
General

If a pool's CPU feature set changes while a VM is running (for example, when a new host is
added to an existing pool, or when the VM is migrated to a host in another pool), the VM
will continue to use the feature set which was applied when it was started. To update the
VM to use the pool's new feature set, the VM must be powered off and then started.
Rebooting the VM, for example, by clicking 'Reboot' in XenCenter, does not update the VM's
feature set.

Customers should reboot the hosts when switching between Intel GPU pass-through (GVT-d)
and Intel Virtual GPU (GVT-g).

Before reinstalling Intel graphics drivers on a VM that already has a driver older than version
15.40.14.4454 installed, the existing driver should be uninstalled in Safe Mode. Failure to
uninstall the existing driver in Safe Mode can cause the VM to crash.

When using NVIDIA vGPU with a high resolution, the VNC console may fail to display the
User Account Control (UAC) dialog box on Windows 7 and Windows Server 2008 R2 VMs.
You can work around this issue by moving the mouse inside the console.

If a virtual GPU enabled VM fails to start, some state may not be cleaned up properly and
the VM may be reported as taking up space on a physical GPU. To work around this issue,
delete and re-create the virtual GPU and then start the VM.

After migrating Container Managed VMs between pools, the Container Management
functionality stops working for the VMs. This is because Container Management is
implemented using a pool-specific key. To work around this issue, the VM-specific
preparation-step for "Container Management" needs to be repeated on the new pool. This
means for CoreOS that the Cloud Config Drive needs to be updated by changing the Config
Drive configuration in the VM preferences. For RHEL/CentOS/OL 7 and Ubuntu 14.04, it
means that xscontainer-prepare-vm needs to be re-run. Note that even if the
preparation-step is repeated, the old XenServer pool may keep access to the VMs.

Renaming a container does not trigger the Container Management view to update.
Additionally, on Ubuntu 14.04, the pause or unpause of a container from outside XenCenter
does not trigger the view to update. This may mean that XenServer may not show the
current (renamed/paused/unpaused) container-status. The underlying cause is that the view
only gets refreshed following Docker event notifications. As a workaround, the refresh can
be triggered manually by performing an action (i.e. start, stop) on an unrelated container
that is running on the same VM.

XenServer 7.0 does not include the off-host 32-bit xe CLI. Customers should instead use the
64-bit off-host xe CLI.

The XenServer Measured Boot Supplemental Pack is not supported on hosts using UEFI boot
mode.

The XenServer Conversion Manager Console depends on the browser (for example: IE,
Chrome, etc.) for proxy settings. If XenServer, ESXi and vCenter can only be reached through
a proxy server, the details of the proxy server should be entered in the browser's proxy
settings. If XenServer, ESXi and vCenter can be reached without a proxy server, and the user
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.
has set the browser’s proxy to access the internet, then the addresses of XenServer, ESXi
and vCenter should be added in the proxy exception of the browser’s proxy settings
XenServer 6.5: Release Notes
January 2015
Internationalization

Non-ASCII characters, such as characters with accents, cannot be used in the host console.

XenServer root passwords must not contain non-ASCII characters.
Hardware Compatibility
Note: Customers should refer to the XenServer Hardware Compatibility List (HCL) for the most
recent additions and advice for all hardware compatibility questions.

XenServer cannot power control hosts running on Dell hardware using the Dell Remote
Access Controller (DRAC).

Customers who use Broadcom Limited's lpfc driver with XenServer 7.0 should use Broadcom
Limited's certified optics with the card.
Starting with XenServer 7.0, Emulex LPE31000, LPE32000 HBAs and all variant HBAs of this
architecture will:
o
o
o
Detect and enable Broadcom Limited, Avago and Emulex-certified SFP and QSFP
optics.
For firmware rev 11.0.243.0 and higher, unqualified optics will be disabled, the link
will be down and an error message will be written to the log file.
The lpfc driver 11.0.0.12 will display the following message and the link will not be
displayed: "3176 Port Name [wwpn] Unqualified optics Replace with Avago optics for Warranty and Technical
support".
Storage

XenServer displays incorrect performance metrics for VM and host disk read/write activities.
The root cause of this issue has been identified and a fix will be made available as soon as
possible in an upcoming hotfix.

Cancelling the import of a VM does not delete the VM or VDIs created. To work around this
issue, restart XAPI, unplug any dom0 VBDs connected to the new VDI and then manually
delete the unwanted VM and the VDI.

When creating a checkpoint (snapshot with memory), if a user cancels the checkpoint
creation operation which is in progress, the created checkpoint may not be deleted and the
VM may end up in a suspended state. To work around this issue, manually delete the
unwanted checkpoint and then resume the VM.

When a VM has a checkpoint with its memory image (suspend VDI) located on a non-shared
SR that cannot be attached to the host on which the VM is running, attempts to migrate the
VM to another pool using Storage XenMotion can fail. To work around this issue, migrate the
VM to a host on which all of the memory image VDIs can be attached.
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.

It is not possible to attach storage provided by Microsoft iSCSI Software Target versions 3.2
or 3.3. However, attempts to attach storage provided by iSCSI Target Server included in
XenServer
6.5:Server
Release
Notes
Windows
2012 and
Windows Server 2012 R2 will succeed.
January 2015

When adding HBA SRs to a pool of XenServer hosts, before running the New SR wizard,
customers should ensure that each LUN is mapped to all hosts in the pool.
Networking

Disabling a static IPv6 address on a Windows VM through XenServer will not take effect until
the VM is rebooted.

When using Fibre Channel over Ethernet (FCoE), attempts to create a VLAN network with
the same tag as the VLAN used by FCoE can fail stating an unknown error occurred.

XenServer does not prevent users from unplugging a NIC used by an FCoE SR.

Attempts to create a Cross-Server Private Network that spans two subnets, where at least
one of the subnets is not the default gateway on a host, can fail. We recommend that you
use the same IP subnet on all hosts to create a Cross-Server Private Network.

When a static IPv6 address is reset, the new IPv6 address will not be displayed on the IPv6
properties for the network interface. However, the network interface will be configured with
the new IPv6 address, in addition to the old address.
XenCenter

On machines configured with an Intel GPU as the primary display device, the VM Properties
dialog of a virtual GPU assigned VM incorrectly reports the GPU type as 'None' in XenCenter,
even when a virtual GPU is assigned to the VM. If you click 'OK' at this stage, XenCenter
accepts the GPU type value to be 'None'. As a result, the virtual GPU will be unassigned and
the VM will not have access to the virtual GPU.
Note: This issue occurs only on the original copy of XenCenter (v7.0.0) included on the
XenServer 7.0 Base Installation ISO. Installing XenCenter v7.0.1, available to download
from the XenServer 7.0 Product Download page, resolves this issue.

XenCenter displays graphs for GPU Pass-through even when performance data is
unavailable.

Modifying the font size or DPI on the computer on which XenCenter is running can result in
the user interface displaying incorrectly. The default font size is 96 DPI; Windows 7 refers to
this as 100%.
Guests

When customers uninstall and then reinstall the Management Agent into a VM, they may
not be prompted for a VM reboot. Note that a VM reboot may be required to get the VM to
an optimized state.

After running 'setup.exe' to install XenServer Tools on a newly created Windows 8.1 or
Windows 10 VM, the initial VM restart operation may take over an hour to complete.
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.

After upgrading a XenServer host from a previous version to XenServer 7.0, Windows VMs
with XenServer Tools installed may incorrectly report as not having the XenServer Tools
XenServer
6.5:orRelease
Notes
installed,
display some
of the functionalities as unavailable. To work around this issue,
install
XenServer
Tools
issued
with XenServer 7.0.
January 2015

VM templates for Windows XP and Windows Server 2003 do not exist in XenServer 7.0, as
support for these guests has been retired by Microsoft. Customers who wish to create a
Windows XP or a Windows Server 2003 VM should use the 'other install media' template.

After repairing the Management Agent on a VM that has XenServer Tools installed, attempts
to reboot or shut down the VM using XenCenter can fail with the error VM didn’t
acknowledge the need to shutdown. To work around this issue, restart the
xenlite Windows service.

Customers who install the XenServer Tools or the Management Agent through RDP may not
see the restart prompt as it only appears on the Windows console session. To ensure that
you restart the VM (if required) and to get your VM to an optimized state, we recommend
that you run setup.exe with the /forcerestart option applied in RDP, or restart the
VM manually after installation. Note that the force restart option will restart the VM only if
it is required to get the VM to an optimized state.

After performing a migration or suspend operation, RHEL, CentOS, Oracle Linux, and
Scientific Linux 7.x VMs may freeze during resume. For more information, see Red Hat
Bugzilla 1141249.

The console screen on HVM Linux guests can go blank after a period (typically ten minutes)
of inactivity. You can work around this issue by adding consoleblank=0 to the kernel
boot parameters of the guest. Consult your guest OS documentation for information about
updating the kernel boot parameters.

After using XenMotion (Live Migration) to move a Windows VM, the memory usage reported
for the VM may be incorrect.

CPU pinning information does not persist when VMs are migrated.
Security
With this release, XenServer will accept connections using the TLS 1.2 security protocol. If required,
you can mandate that XenServer only accepts connections using TLS 1.2, and not allow earlier versions.
Customers can mandate the use of TLS 1.2 and disable earlier versions by doing one of the following:
1. In XenCenter, in the Pool Properties dialog, go to Security, and select the checkbox TLS 1.2
only
2. On the xe command line enter: xe pool-disable-ssl-legacy
Note: Before switching the security protocol to accept communication over TLS 1.2 only, you MUST
ensure that any appliances (including third-party appliances) that communicate with the XenServer
pool are compatible with TLS 1.2.
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.
If you are writing a client program that communicates to XenServer using an SDK, or updating an
existing client program to communicate with XenServer 7.0, and would like to use TLS 1.2, you may
XenServer
Release
need certain 6.5:
minimum
versionsNotes
of your libraries, or insert extra lines in your program.
January 2015
C#
C# requires at least .NET v4.5 and Visual Studio 2013. By default, .NET 4.5 will not connect using TLS
1.2; to use TLS 1.2 you will need to add the following line at the start of your program:
To restrict connections to hosts using TLS 1.2:
ServicePointManager.SecurityProtocol = SecurityProtocolType.Tls12;
Or, to connect to hosts using any version of TLS:
ServicePointManager.SecurityProtocol = SecurityProtocolType.Tls |
SecurityProtocolType.Tls12;
PowerShell
PowerShell requires at least .NET 4.5 and PowerShell 4. To use TLS 1.2 you will need to add the
following line at the start of your program:
To restrict connections to hosts using TLS 1.2:
[Net.ServicePointManager]::SecurityProtocol='tls12'
Or, to connect to hosts using any version of TLS:
[Net.ServicePointManager]:: SecurityProtocol='tls,tls11,tls12'
Java
In order to use TLS v1.2 by default, you will need to use Java 8.
C and Python
C and Python require OpenSSL v1.0.1 or higher.
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.
About Citrix
XenServer
6.5: Release
Citrix (NASDAQ:CTXS)
is leading theNotes
transition to software-defining the workplace, uniting virtualization, mobility
management, networking and SaaS solutions to enable new ways for businesses and people to work better.
January
2015
Citrix solutions power business mobility through secure, mobile workspaces that provide people with instant
access to apps, desktops, data and communications on any device, over any network and cloud. With annual
revenue in 2015 of $3.28 billion, Citrix solutions are in use at more than 400,000 organizations and by over 100
million users globally. Learn more at www.citrix.com.
The copyright in this report and all other works of authorship and all developments made, conceived, created,
discovered, invented or reduced to practice in the performance of work during this engagement are and shall
remain the sole and absolute property of Citrix, subject to a worldwide, non-exclusive license to you for your
internal distribution and use as intended hereunder. No license to Citrix products is granted herein. Citrix
products must be licensed separately. Citrix warrants that the services have been performed in a professional
and workman-like manner using generally accepted industry standards and practices. Your exclusive remedy for
breach of this warranty shall be timely re-performance of the work by Citrix such that the warranty is met. THE
WARRANTY ABOVE IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED, STATUTORY
OR OTHERWISE WITH RESPECT TO THE SERVICES OR PRODUCTS PROVIDED UNDER THIS AGREEMENT, THE
PERFORMANCE OF MATERIALS OR PROCESSES DEVELOPED OR PROVIDED UNDER THIS AGREEMENT, OR AS TO
THE RESULTS WHICH MAY BE OBTAINED THEREFROM, AND ALL IMPLIED WARRANTIES OF MERCHANTIBILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR AGAINST INFRINGEMENT. Citrix’s liability to you with respect to any
services rendered shall be limited to the amount actually paid by you. IN NO EVENT SHALL EITHER PARTY BY
LIABLE TO THE OTHER PARTY HEREUNDER FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT OR PUNITIVE
DAMAGES (INCLUDING BUT NOT LIMITED TO LOST PROFITS) REGARDLESS OF WHETHER SUCH LIABILITY IS BASED
ON BREACH OF CONTRACT, TORT, OR STRICT LIABILITY. Disputes regarding this engagement shall be governed
by the internal laws of the State of Florida.
LINKS TO THIRD PARTY SITES. These release notes may contain links to web sites controlled by parties other than
Citrix. Citrix is not responsible for and does not endorse or accept any responsibility for the contents or use of
these third party web sites. Citrix is providing these links to you only as a convenience, and the inclusion of any
link does not imply endorsement by Citrix of the linked web site. It is your responsibility to take precautions to
ensure that whatever you select for your use is free of viruses or other items of a destructive nature.
Copyright © 2016 Citrix Systems, Inc. All rights reserved.
Citrix and Xen are registered trademarks. XenServer and XenCenter are trademarks of Citrix Systems, Inc. in
the United States and other countries.
All other product names, company names, marks, logos, and symbols are trademarks of their respective
owners.
851 West Cypress Creek Road
Fort Lauderdale, FL 33099
954-267-3000
www.citrix.com
Enterprise features are available for XenServer Enterprise edition customers, or those who have access to XenServer through their
XenApp/XenDesktop entitlement. To learn more about XenServer editions, and to find out how to upgrade, visit the Citrix website.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising