Airflow Catalogue Air Measuring Instrumentation

Airflow Catalogue Air Measuring Instrumentation
Air Measuring
Instrumentation
Accurate. Reliable. Every Time.
AIRFLOW History
Service and Support
ABOUT AIRFLOW Instruments™
You can expect fast turnaround times for calibration and repair
service for your AIRFLOW Instruments. Our extensive network
of world-class distributors is standing by to provide you with
outstanding local support. Detailed product specifications, as
well as service information, is available on the website
at www.airflowinstruments.co.uk.
In 1955, from one man's expertise in the field
of air flow measurement and fan design, AIRFLOW
Developments Limited was founded. Designed by
air measurements experts, AIRFLOW Instruments
earned a reputation as being innovative, accurate,
and reliable. Today, AIRFLOW Instruments are
manufactured to the stringent requirements
of ISO9001.
In 2005, TSI Incorporated acquired the Instrument Division of AIRFLOW Developments, combining
over 90 years of expertise and innovation in air
measurement. Through investment in research and
development, we continually seek new ways of
measuring air flow and other ventilation parameters.
AIRFLOW products are accurate, high quality,
professional grade instruments used by a wide
range of customers, including building service
contractors, commissioning specialists, facility
engineers, and research professionals.
2
AIRFLOW Instruments
www.airflowinstruments.co.uk
New Products, New Look, Same Great Quality
Table of Contents
Anemometers (pages 4–5)
Multi-Function Instruments — TA460 Series
Thermal Anemometers — TA440, TA430 and TA410
Rotating Vanes (pages 6–7)
Rotating Vane Anemometers — LCA301, LCA501 and EDRA6
Volume and Pressure Products (pages 8–10)
ProHood Capture Hoods — PH721
ProHood Manometer — PH720
Micromanometers — PVM610 and PVM620
Hydronic Manometers — HM670 and HM680
Leakage Testers (page 11)
P.A.N.D.A — PAN311 and PAN321
Duct Leakage Testers — HVLT and LVLT
Indoor Air Instruments (pages 12–13)
Indoor Air Quality Meters — IAQ910 and IAQ920
Thermohygrometers — RH710 and RH720
Air Monitoring (pages 14–15)
Air Velocity Transducers — 8455, 8465, and 8475
Pitot Static Tubes
Liquid Manometers — Type SJ and Type 504 Inclined
AIRFLOW calibrated instruments are supplied with a FREE fully traceable certificate of calibration.
www.airflowinstruments.co.uk
AIRFLOW Instruments
3
Anemometers
Multi-Function Anemometers
TA460 Series
The TA460 series are portable, hand held, Multi-Function
Thermal Aneomometers. They are designed to measure air
velocity, differential pressure, temperature, and humidity.
Calculations include air flow, wet bulb, dew point, and
turbulence. The instruments are compatible with a range of
optional probes that have a versatile choice of features
and functions.
Features and Benefits
Model TA460
4
Anemometers www.airflowinstruments.co.uk
•
Accurate air velocity measurement
•
Optional ‘smart’ plug-in probes, including CO2, rotating
vane probes, and VOC (volatile organic compounds)
•
Data logging and downloading software included
•
Fast calibration and repair service
Thermal Anemometers
Thermal Anemometers
Models TA440, TA430
Model TA410
The Model TA440 and TA430 are like having multiple meters
for the price of one, yet simple to operate. Purchase
instruments with straight or articulated probe– all in
one compact package.
The TA410 digital velocity meter is a solid choice for an Air
Velocity Meter, without compromising accuracy and precision.
It is perfect for troubleshooting HVAC systems and conducting
commissioning work.
Features and Benefits
•
Range is 0-20 m/s
•
Large, easy to read display
•
Press button to hold reading
Model TA440
Features and Benefits
•
High accuracy over a wide velocity range
•
Simultaneously measures temperature, velocity, and
humidity (TA440)
•
Calculates volumetric flow, actual/standard velocity, and
wet bulb (TA440)
•
Data logging and downloading software included
www.airflowinstruments.co.uk
Anemometers
5
Rotating Vanes
Rotating Vane Anemometers
Model LCA301
Model LCA301 is a light weight, robust, and simple to use
Rotating Vane Anemometer that provides accurate and reliable
readings every time. Ideal for HVAC commissioning at grilles,
ducts, and diffusers; the LCA301 displays readings in metric or
imperial mode.
Features and Benefits
Model LCA301
6
Rotating Vanes
•
Reversible 100 mm head allows readings at supply and
extract grilles
•
Calculates volumetric flow rate
•
Compatible with Aircone Flow Hoods
•
No density correction factors required
•
Automatic averaging of air velocity
www.airflowinstruments.co.uk
Rotating Vanes
Model EDRA–6
The EDRA–6 Multi–Range Rotating Vane Anemometer provides
instantaneous readings of air velocity. Dual scaled in m/sec and
ft/min, the display is switchable across three ranges providing
excellent resolution and readability even at low velocities.
Rotating Vane Anemometers
Model LCA501
Model LCA501 is a hand held digital Rotating Vane Anemometer
used for air velocity and volumetric flow measurements.
Aircone Flow Hoods
Aircone Flow Hoods are a fast and accurate method of maximizing
the usefulness of your 100 mm rotating vane anemometers.
For a modest investment, you can double the capability of your
rotating vane, turning it into an air volume flow balancing tool.
Model LCA501
Features and Benefits
•
Rectangular and circular cones available
•
Measures volumetric flow at grilles, diffusers, air valves,
and linears
•
Reads air volume quickly and accurately
•
Excellent choice for small grilles
•
Compatible with LCA301 and LCA501
Features and Benefits
•
Measures velocity and temperature
•
Sweep mode
•
Log, store, and recall data
•
Download data to a PC
•
Optional telescopic probe available
www.airflowinstruments.co.uk
Rotating Vanes
7
Volume and Pressure Products
Features and Benefits
Model PH721
•
Ergonomic design and ultra light weight for easy one
person operation
•
Detachable digital manometer for use in other applications
•
Use with pitot, air flow, temperature, or relative
humidity probes
•
Multiple hood sizes available
•
Bio-Safety hood kits available
Shown with
optional accessories
Capture Hoods
Models PH721
The PH721Capture Hood is a multipurpose electronic air
balancing instrument for reading air volume flow at diffusers,
grilles, and linear slots. It is ideally suited for commissioning
specialists, facilities managers, health and safety specialists,
test engineers, and ventilation installers. This light weight,
ergonomically designed kit saves time and money while helping
to create a healthy and energy efficient environment.
The standard PH721 kit includes 610 mm x 610 mm capture
hood, base, manometer, pitot tube, static pressure tips,
Norprene™ tubing, and LogDat downloading software in a
luggage style wheeled carrying case.
8
Volume and Pressure Products
www.airflowinstruments.co.uk
Manometer
Micromanometers
Model PH720
Models PVM620, PVM610
The PH720 is one of the most advanced, versatile, and
easy–to–use Manometers on the market today. Auto–zeroing
allows you to make measurements throughout the day. Velocity
matrix accessory is useful in measuring downflows in clean
rooms and other specialized spaces.
The PVM620 is a rugged, compact, comprehensive
Micromanometer that measures pressure, and calculates
velocity and volumetric flow rate. It can be used with Pitot
tubes to measure velocity and then calculate flow rates with
user–input duct size and shape. Premium features make it ideal
for HVAC, environmental safeguards, commissioning, process
control and system balancing.
The PVM610 is an easy to use, hand held digital
Micromanometer for fast, accurate and reliable pressure
measurement. It can also calculate velocity.
Model PH720
Features and Benefits
•
Accurately measures pressure, velocity (Pitot), and flow
•
Large, easy to read display
•
Data logging and downloading software included
•
Resolution: 0.001Pa
Optional Accessories for PH720 AND PH721
•
16 point velocity matrix with telescoping handle
•
Air flow probe
•
Temperature probe
•
Temperature/humidity probe
•
Bio-safety cabinet hood kit
Model PVM620
Features and Benefits PVM620 AND PVM610
•
Measures differential and static pressure from
–3735 to +3735 Pa
•
Calculates and displays velocity when using a Pitot tube
Added Features PVM620
•
Calculates volumetric flow rate in duct from velocity and
user-input duct size and shape
•
Records data points in duct traverse using
sampling function
•
Data logs up to 12,700 samples and 100 test IDs with
time and date stamp
•
Includes LogDat2 downloading software
www.airflowinstruments.co.uk
Volume and Pressure Products
9
Added Features HM680
•
Performs on–board universal flow and btu/hr calculations
•
Displays volumetric flow when a Cv (Kv) factor
is programmed
Hydronic Manometers
•
Allows up to 100 Cv (Kv) factors to be entered
Models HM670, HM680
•
Calculates brake power, heat flow, Cv (Kv) factors and
impeller sizing
The HM670 and HM680 are used to balance hydronic heating
and cooling systems and to check pump performance. Both
models can measure and display differential, high side, and
low side pressures simultaneously without the need to
change hose connections or instrument valve settings.
•
Stores up to 1,000 data points for recall or downloading
via USB interface
Model HM680
Features and Benefits HM670 AND HM680
•
Large backlit display for use in low light areas
•
Operates on four alkaline or NiMH rechargeable batteries
•
Reads in. H2O, ft. H2O, psi, in. Hg, mm H2O, kPa,
mm Hg, bar
10 Volume and Pressure Products
www.airflowinstruments.co.uk
Leakage Testers
Duct Leakage Testers
Models LVLT, HVLT
These two units provide contractors, commissioning
engineers, and research and development technicians with a
comprehensive choice of equipment to test and quantify air
leakage virtually anywhere low pressurisation is necessary.
They provide a fast, accurate measurement solution in metric or
imperial units. The method of measurement of air flow rate is a
primary standard directly related to BS 848 Part 1.
Model PAN321
Positive and Negative Duct
Accreditation (PANDA) System
Model PAN311, PAN321
The Positive and Negative Duct Accreditation (PANDA) system
provides contractors, commissioning engineers, and research
and development technicians with the best in class choice of
test equipment to quantify air leakage in ductwork and other
areas as well as the ability to measure the performance
of ducted systems. The PANDA provides a fast, accurate,
automated solution and helps to ensure compliance with
EN12237, EN1507 and EUROVENT 2/2 standards, enhancing
energy savings in buildings.
Features and Benefits
•
LM1 Leakage Manager for instantaneous display of actual
ductwork leakage and test pressure
•
Two models up to 354 I/sec and 2500 Pa
•
Fundamental manometry readout kit available
•
AHU enclosures and laboratory containment for COSHH
Features and Benefits
•
•
•
•
•
Positive and Negative Duct Leakage Testing in one rig
Energy savings by testing and minimizing duct leaks
Accuracy is ± 2,5% of volume flow
Unique performance and fan speed control charge up of
duct system to test static pressure within minutes
Fits in the back of vans and estate cars
Model HVLT
Model LVLT
www.airflowinstruments.co.uk
Leakage Testers
11
Indoor Air Instruments
Features and Benefits
•
Long-lasting NDIR sensor to monitor CO2
•
Manual or continuous data logging
•
Includes LogDat2 software and interface cable to
download to a PC
•
Calculates % outside air from CO2 or temperature
•
Displays humidity as %RH, dew point, wet bulb, absolute
humidity, or humidity ratio
Model IAQ920
Indoor Air Quality Meters
Model IAQ910 CO2 Meter
The IAQ910 CO2 Meter is an excellent hand held diagnostic
instrument for measuring and monitoring carbon dioxide levels.
HVAC professionals use it for conducting IAQ surveys, checking
air changes, and evaluating ventilation systems in schools,
offices, factories, and hospitals.
Indoor Air Quality Meters
Features and Benefits
Models IAQ920, IAQ910
The IAQ920 Indoor Air Quality Meter quickly and accurately
measures carbon dioxide, temperature, and humidity levels in
real time with a single probe. It stores up to 12,700 sets of
downloadable readings with time and date stamp. It is the ideal
instrument for checking ventilation rates, air changes,
investigating indoor air quality, and performing thermal
comfort studies.
12
Indoor Air Instruments
•
Statistics function for average, maximum, and
minimum values
•
Large display
•
Real-time CO2 readings in parts per million (PPM)
•
Integrated NDIR sensor
www.airflowinstruments.co.uk
Thermohygrometers
Model RH720
The RH720 Thermohygrometer is an excellent diagnostic
instrument for conducting thermal comfort studies, IAQ
evaluations, monitoring manufacturing processes, checking
storage facilities, and verifying heating and cooling
system performance.
Thermohygrometers
Model RH710
Model EBT721
The RH710 Thermohygrometer is a base model that displays
average temperature and humidity. It is ideal for use in plant
maintenance and inspection of air conditioning systems.
Model RH720
Features and Benefits
Features and Benefits
•
Measures temperature and %RH in real time
•
Calculates % outside air
•
Calculates wet bulb and dew point temperatures
•
Stores up to 12,700 sets of downloadable readings with
time and date stamp
•
Download to a PC using LogDat2 software
•
Measures temperature and humidity
•
Calculates wet bulb temperature
•
Simple operation
www.airflowinstruments.co.uk
Indoor Air Instruments
13
Air Monitoring
Features and Benefits
Model AVT
•
The 8455 is a general purpose transducer with a
protected tip and rugged ceramic sensor
•
The 8465 has a windowless sensor for measurements
in confined spaces
•
The 8475 features an omni-directional sensor which
makes it accurate at very low velocities and for use when
flow direction is unknown
Air Velocity Transducers
Models 8455, 8465, 8475
The 8455, 8465, and 8475 Air Velocity Transducers are ideal for
both temporary and permanent installations for air velocity
measurements in research and development labs, manufacturing
processes, and other applications. The full–scale range, signal
output, and time constant are user–selectable and can be easily
changed to meet the needs of your application.
Model 8455
Model 8465
Model 8475
14
Air Monitoring
www.airflowinstruments.co.uk
Pitot Static Tubes
Liquid Manometers
Choose from a comprehensive range of Pitot Static Tubes
offering telescopic, fixed length, and jointed tubes to suit
virtually any application. Also available are “S” type Pitots for
restricted access and hostile environments and Pitots with
adjustable mounting glands for permanent installations. The
Thermo–Pitot Static Tubes with integral thermocouple sensors
allow combined in-line pressure and temperature measurement.
Manufactured from a high grade stainless steel, all Pitots are
durable and tolerate aggressive conditions. They are suitable for
sensing in heating, ventilation, and air conditioning equipment
including commissioning and troubleshooting.
Industrial Manometers
AIRFLOW’s general purpose Manometers are suitable for positive,
negative and differential pressure and combine low cost with
quality engineering and a high standard of performance. The
range includes basic gauges for filter monitoring in air handling
systems, high sensitivity inclined gauges for monitoring more
critical process pressures, and a number of vertical column
gauges suitable for wall mounting or free standing use in
the laboratory.
Model FL1.5
Model FL4
Type SJ (Slim Jim)
Vertical Manometers
The Standard SJ Instrument body is an aluminum extrusion,
incorporating a groove which supports the sight glass along its
entire length. The sight glass is held in place by the bow-front
anodized aluminum scale.
Features and Benefits
Features and Benefits
•
High pressure – up to 6000 Pa
•
Suitable for wall mounting only
•
Fine adjustment for zero by altering height of
reservoir tank
•
Robust construction for industrial applications
•
Totally compatible with manometers, pressure gauges,
and transmitters
Type 504 Inclined
•
Use for COSHH assessment and environmental monitoring
Gauges
•
Excellent accuracy, K–factor 0.997
•
Excellent yaw and pitch characteristics
•
Spring slip markers for insertion
Highly sensitive instruments suitable for wall or panel mounting
with the fixing kit supplied. The combination of long scale
length gives precise measurement of low pressures.
•
Direction pointer to ensure correct alignment
Features and Benefits
•
Scale length of 250 mm
•
Range 0–125 Pa or 0–500 Pa
•
Robust construction for industrial applications
www.airflowinstruments.co.uk
Air Monitoring
15
AIRFLOW Instruments, TSI Instruments Ltd.
Stirling Road, Cressex Business Park, High Wycombe, Buckinghamshire, HP12 3RT, United Kingdom
UK
France
Germany
Tel: +44 149 4 459200
Tel: +33 491 11 87 64
Tel: +49 241 523030
E-mail: tsiuk@tsi.com
E-mail: tsifrance@tsi.com
E-mail: tsigmbh@tsi.com
Contact your local AIRFLOW Distributor or visit our website www.airflowinstruments.co.uk for more detailed specifications.
P/N 2980542 Rev C
Copyright © 2009 by TSI Incorporated
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising