AA1500™Air Assisted Airless Spray Gun

AA1500™Air Assisted Airless Spray Gun
Re
pro ad
ab fes wha
ou sio t f
t th na ini
e A ls a shin
A1 re g
50 sa
0! yin
* g
NE
W!
A54-67 5/01
Patent Pending
AA1500 Air Assisted Airless
Spray Gun
™
Higher transfer efficiency for today's highest quality finishing.
AA1500 Air Assisted Airless Spray Gun
A superior finish with
reduced overspray and
VOC emissions.
The unique tip and air cap design of the new
Binks AA1500 Air Assisted Airless Spray Gun
allows operators to use lower fluid and air
pressure than the competition to achieve a
superior finish. This means:
Better transfer efficiency
A softer spray pattern
Less bounceback
Lower booth maintenance costs
Less overspray contaminating other parts
Longer life on wear parts
Simple design means
parts changeouts in
3-5 minutes.
Only 20 replaceable parts
Component cartridge design for
quick and easy repairs
No special tools needed for repairs
Low replacement costs on main wear
parts (tips, needle/packing cartridge,
seats, and air caps)
Superior ergonomics equals superior
economics. The “ergo-logic” design of the
Binks AA1500 reduces operator fatigue
which increases production rates, improves
finish quality, and improves efficiency while
reducing the risk of painful and costly CTD's
(Cumulative Trauma Disorders).
Handle designed to fit comfortably in
the hand
Weighs 22% less than closest competitor
(16 oz. vs. 20.4 oz)
Trigger Pull Tension is 22% lighter than
closest competitor (3.2 lbs. vs. 4.1 lbs.)
Specifications
Maximum Fluid Pressure . . . 1500 psi / 105 bar
Maximum Air Pressure . . . . . . 100 psi / 6.8 bar
Gun Body . . . . . . . . . . . . . . . . Forged Aluminum
Fluid Path . . . . . . . . . . . . . . . . . . Stainless Steel
Fluid Shut Off Type . ..…….Stainless Steel Ball
Ergonomic design reduces
operator fatigue.
Trigger Span/distance for full trigger
pull is 33% less than closest competitor
(.4" vs. .6")
* “This gun is awesome.”
Solid forged aluminum body
for maximum durability
Standard UHMW Seat or Optional Tungsten Carbide
Fluid Inlet Size . . . . . . . . . 1/4” NPS (m) Thread
Air Inlet Size . . 1/8” NPT (m) x 3/8” O.D. Push-In
Tube Fitting or D.M. Nipple (see “Fittings” below)
Gun Weight . . . . . . . . . . . . . . . . . . 16 oz / 500 g
Key rebuild only takes 3-5
minutes - reduces downtime
Only 20 replaceable parts
saves money and inventory
* “One of our spray gun operators tested
the AA1500 and noticed how much better
her arm felt. When she went back to her
old spray gun, she suffered arm fatigue
in just 2 hours and switched back to
the AA1500.”
Our unique air cap and tip
design gives you high transfer
efficiency and a softer spray
pattern with less bounceback
* “I can now spray material at 200 psi less
Operators appreciate the reduced
than my previous air assist airless spray
gun, use less fluid, and achieve a superior
finish!”
trigger pull force - it’s 22% lighter
than the competition
* “This is the first air assist airless spray
gun that has given me 38% material
savings over my existing HVLP spray
guns.”
Reduced trigger travel - only .4”
improves operator comfort
Stainless steel fluid path
sprays all of today's coatings
Ergonomic grip design
for comfortable fit and feel
2
Accessories
Spray Tip Selection Charts
Hoses
PART NUMBER
DESCRIPTION
71-4990
71-4991
71-4992
71-4993
15’ Poly Air Tubing 3/8” O.D., 1/4” I.D. w/ Fittings
25’ Poly Air Tubing 3/8” O.D., 1/4” I.D. w/ Fittings
15’ 1/8” High Pressure Fluid Hose Assembly
25’ 1/8” High Pressure Fluid Hose Assembly
Fittings
PART NUMBER
SIZE
FAN WIDTH *
113-00906
113-00908
113-00910
113-00912
113-00914
.009
.009
.009
.009
.009
4” – 6”
6” – 8”
8” – 10”
10” – 12”
12” – 14”
PART NUMBER
DESCRIPTION
PART NUMBER
SIZE
FAN WIDTH *
54-4975
54-4976
71-28
1/8" NPT Male x 3/8” O.D. Push-In Tube Fitting, standard
1/4” NPT Female x 3/8” O.D. Push-In Tube Fitting, optional
D.M. Nipple 1/8” NPT(m) x 1/4” NPS(m), alternate
113-01206
113-01208
113-01210
113-01212
113-01214
.012
.012
.012
.012
.012
4” – 6”
6” – 8”
8” – 10”
10” – 12”
12” – 14”
PART NUMBER
SIZE
FAN WIDTH *
113-01506
113-01508
113-01510
113-01512
113-01514
.015
.015
.015
.015
.015
4” – 6”
6” – 8”
8” – 10”
10” – 12”
12” – 14”
PART NUMBER
SIZE
FAN WIDTH *
113-01806
113-01808
113-01810
113-01812
113-01814
.018
.018
.018
.018
.018
4” – 6”
6” – 8”
8” – 10”
10” – 12”
12” – 14”
PART NUMBER
SIZE
FAN WIDTH *
113-02110
113-02112
113-02114
113-02116
.021
.021
.021
.021
8” – 10”
10” – 12”
12” – 14”
14” – 16”
PART NUMBER
SIZE
FAN WIDTH *
113-02410
113-02412
113-02414
113-02416
.024
.024
.024
.024
8” – 10”
10” – 12”
12” – 14”
14” – 16”
PART NUMBER
SIZE
FAN WIDTH *
113-02710
113-02712
113-02714
113-02716
.027
.027
.027
.027
8” – 10”
10” – 12”
12” – 14”
14” – 16”
Fluid Seat
PART NUMBER
DESCRIPTION
54-4926
54-4960
Standard UHMW Fluid Seat
Optional Tungsten Carbide Fluid Seat
Fluid Filter
PART NUMBER
DESCRIPTION
103-1241
54-3655
100 Mesh Inline Filter, 4000 PSI working pressure
100 Mesh Gun Mounted Filter, 5800 PSI working pressure
Fluid Regulator
PART NUMBER
DESCRIPTION
845001
845010
Med. Pressure, Regulator with Gauge, 6 gpm. 100 to 800 regular range
Med. Pressure, Regulator without Gauge, 3 gpm. 400 to 1250 regular range
Repair & Cleaning Kits
PART NUMBER
DESCRIPTION
54-4970
Replacement Parts Kit: includes fluid seat, O-ring, front head gasket,
needle/packing cartridge, fluid inlet nut, and air valve assembly
Cleaning Kit: includes one standard stiff nylon pipe cleaning brush,
full-size nylon brush, tip cleaner, and Binks Gunners Mate Lubricant
54-4994
How to Order the AA1500 Spray Gun...
To order a AA1500 Spray Gun less tip,
order part number...
1500 - 0000 - 2
To order a AA1500 Spray Gun with tip,
order part number...
1500 - 2716 - 2
Airless Spray Tip - Fluid Flow Rate*
Orifice
Size
(Inches)
500 PSI
oz./min.
1000 PSI 1500 PSI
oz./min. oz./min.
VERY THIN - Wash Primers, Dyes, Stains, Solvents, Water, Inks
.009
.012
4.5
9.2
5.7
11.7
6.8
15.5
THIN - Sealers, Lacquers, Primers, Ink, Zinc Chromate, Acrylics
part
specify
fan size
air cap
number orifice size
For additional tips, order by part number...
113 - 02714
.015
13.0
.018
.021
12.0
14.0
24.0
19.0
24.0
26.0
32.0
Flow rate of fluid materials through spray tip, oz./min.
* Based on 1500 PSI with water. Actual results may vary,
depending on material viscosity.
part number orifice size fan size
See spray tip selection chart for orifice size and fan size required
19.0
MEDIUM - Lacquers, Synthetics, Enamels, Varnishes, Shellacs,
3
* Based on 1500 PSI with water. Actual results may vary,
depending on material viscosity.
Sales and Service
Through a Nationwide Network of Industrial Distributors
North American Office
ITW Industrial Finishing
Binks
195 Internationale Blvd.
Glendale Heights, IL 60139
630-237-5000
Fax 630-237-5011
www.binks.com
Customer Service
1-800-992-4657
Technical Support
1-888-992-4657
WATERBORNE
COMPATIBLE
© 2001 ITW Industrial Finishing Printed in U.S.A.
A54-67 5-01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising