QUICK START GUIDE

QUICK START GUIDE
QUICK START GUIDE - CHATTERBOX
CONNECT
• Connect Inputs
• Connect Battery
• Connect AC power
• Connect Phone Line
BEGIN
Section 3.0 of
Owners Manual
PROGRAM DIALER:
To program dialer at the front panel press 1 then
PROGRAM. Put in program code followed by
ENTRY COMPLETE (EC) for each instruction.
Press NORMAL to exit program mode. Section 7.0
Procedure
Example
Clear Memory:
Momentarily short JB3
Enter Phone Numbers
(you must enter at least 1 phone
number)
71 658 6713 EC
(phone # 1)
Set Touch Tone dialing
(recommended) This code is a
toggle, switching between touch
tone and pulse each time
81 EC
Set Alarm Criteria for all
channels:
use ZZ12 for normally open
use ZZ11 for normally closed
use ZZ13 for no alarm reporting
0112 EC (CH1 N.O.)
0811 EC (CH8 N.C.)
1613 EC (CH16 no alarm)
Manually Clear Alarm Flags:
This clears Acknowledged Alarms
850 EC
851 EC
Section 4.0
TEST
• Verify that each sensing device will trip the dialer
• Verify that the dialer will reach each.phone number on
call out.
• Clear dialer of all test alarms and clear alarm flags
Section 4.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising