MCP Indoor Call Point Range
MCP Indoor Call Point Range
MCP 2 LED Model
(Red Versions)
>Product Benefits
•
Unique ‘Plug & Play’ installation concept
•
Total ‘Flex-Ability’ in the choice of operating element
•
Anti-Tamper facility
•
Enhanced aesthetics
•
Fully approved to the latest standards
•
Backward compatibility
•
CPD Approved
166b/41 & 166b/42
G206061
Product Overview
Installation efficiency, flexibility and full compliance with the latest standards are at the
heart of the new MCP indoor call point range.
Installation time and ultimately cost, are of paramount importance to any fire or security
installer. The MCP range directly reflects this need by providing a unique ‘plug and play’
concept designed specifically to reduce installation time. All new MCP products utilise
a special terminal block, where all initial installation cabling is terminated. This terminal
block is then simply connected to the back of the MCP. Simple, but effective, with no
re-termination required and no time wasted.
Through new standards and legislation, both break glass and resettable operating elements
can now be used within a manual call point. To provide you with the greatest ‘flex-ability’,
the new MCP range can be configured as either a break glass or resettable unit by simply
changing from one element to another. No other additional parts or alternative products
need to be ordered.
All MCP indoor call point products also help preserve the integrity of the overall system as
illegal removal of the product lid will result in the call point operating and the system going
into alarm.
Full compliance with the latest standards is essential and the new MCP indoor call point
range is fully approved to the latest EN54-11 standard (compliant markings only).
All MCP2 products are supplied with an LED indicator as standard.
The MCP2A Product version is supplied with both an LED/resistor and normally open,
clean contact electrical options. These options are simpily utilised by attaching the
terminal block to the required connection in the back of the MCP product. A variety of
resistsor values are available by request, with 470W offered as standard.
The MCP2B product versions are designed for connection to “savwire” systems.
MCP2
Rev. No. 6
Electrical Specification
Connection Details:
See Figure .1
Cable Termination:
0.5-2.5mm2
Maximum Voltage:
30VDC
Current Rating (switch only): 2 Amps
Figure .1
MCP2A-X
MCP2B-X
Environmental Specification
Humidity:
93± 3% non-condensing
Operating Temperature:
-100C to +550C
Storage Temperature:
-100C to +550C
Ingress Protection (IP) Rating: IP24D
For RoHS, WEEE & REACH information please see www.kac.co.uk
Mechanical Specification
87mm
27.5mm 32mm
60mm
87mm
93mm
Material:PC/ABS
Weight:
130g Flush
180g Surface
Colour: Red, Ral 3001
89mm
Ordering Information
Model
Electrical Configuration
Mounting
Element
Non-Stock
MCP2A-R470FG-K013-01 LED, 470W Resistor N\O contacts 30VDC
Flush
MCP2A-R470SG-K013-01 LED, 470W Resistor N\O contacts 30VDC
Surface
MCP2A-R470SF-K013-01
LED, 470W Resistor N\O contacts 30VDC
Surface
MCP2B-R820SG-K013-01 LED, 820W Resistor N\O contacts 30VDC (SAV) Surface
Operating
Glass
Glass
Flexi
Glass
N\O = Normally Open Contact
SAV = Savwire system
Accessories
CodeDescription
SC070 Pack Of Ten Test Keys
KG1 x 5 Pack Of Five Glass Elements (Also available in packs of 10, 25 & 50)
PS210 Flexible Operating Element
PS200 Plain Hinged Cover
SC071 Pack Of Twenty Terminal Blocks
> KAC Alarm Company Ltd
KAC House, Thornhill Road,
North Moons Moat, Redditch,
B98 9ND, United Kingdom
Tel: +44 (0) 1527 406655
Fax: +44 (0) 1527 406677
e-mail: marketing@kac.co.uk
We reserve the right to amend the content of this document without prior notice.
Markings
EN54-11
EN54-11
EN54-11
EN54-11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising