Grandstream HT701 / HT702 Installation Guide

Grandstream HT701 / HT702 Installation Guide
Grandstream HT701 / HT702 Installation Guide
Saved From: https://voipo.com/help/article/grandstream-ht701-ht702-installation-guide-104.html
Connecting Your VOIPo Adapter (Grandstream HT701 / HT702)
To begin using your new VOIPo service, simply connect the VOIPo adapter to your internet connection.
1) Phone - Plug your telephone into Phone Port of the adapter. (do not connect the equipment through POTS/in-home
telephone wiring)
2) Internet - Plug the provided ethernet cable into the LAN port of the HT701 / HT702 adapter. Plug the other end of
the ethernet cable into your router or modem.
3) Power - Plug the AC power adapter into the VOIPo adapter and plug it into an electrical outlet. Reboot your modem
or router and then the adapter.
Congratulations – Within 3-5 minutes, you should be able to make and receive calls.
Do NOT reboot or unplug the device for at least 5 minutes.
It may take a few minutes to activate and update itself.
Page 1/1
PDF Generated by PHPKB Knowledge Base Script
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising