HPI KEN BLOCK 2013 GRC MICRO RS4 FORD FIESTA 1/18 2.4ghz

HPI KEN BLOCK 2013 GRC MICRO RS4 FORD FIESTA 1/18 2.4ghz
HPI KEN BLOCK 2013 GRC MICRO RS4
FORD FIESTA 1/18 2.4ghz RTR 111224
Click Here For Video Clip
PRE-ASSEMBLED 1/18TH SCALE ELECTRIC 4WD RACE CAR WITH
2.4GHZ RADIO SYSTEM, 180 SIZE MOTOR, EN-2 ELECTRONIC
SPEED CONTROL, SF-10W WATERPROOF SERVO, BATTERY
PACK, CHARGER
HPI is proud to introduce our second officially licensed Ken Block
replica, the Ken Block 2013 GRC Micro RS4 With Ford Fiesta H.F.H.V.
Body! This exact scale replica is a 1/18th scale version of Ken's latest
car that he's been demonstrating and driving for 2013, and looks exactly
the same as his full-size car!
This 4WD 1/18th scale RC car is perfect for shredding tires inside and
outside, with a high-powered motor driving all four wheels and coil-over
shocks providing smooth power and excellent control. This Ready To
Run kit features a highly detailed scale replica Ken Block 2013 GRC
Ford Fiesta H.F.H.V. body and GRC Spec replica wheels for an
awesome scale look wherever you drive!
The HPI Micro RS4 is powered by an HPI 180-size motor and features
an electronic speed control, full time 4WD belt drive and waterproof
steering servo. It's ready to blast down the road just like Ken Block's full
sized Ford Fiesta H.F.H.V. from the world-famous Gymkhana videos!
HPI 2.4GHz RADIO SYSTEM
Controlling the Ken Block 2013 GRC Micro RS4 With Ford Fiesta
H.F.H.V. Body is easy with the HPI 2.4GHz radio system. There's no
need to worry about changing crystals, the radio prevents frequency
conflicts automatically. The pistol grip transmitter features adjustments
for steering trim, throttle trim, steering dual rate, end points, servo
reversing switches and low battery indicator.
GRC REPLICA WHEELS
The Ken Block 2013 GRC Micro RS4 With Ford Fiesta H.F.H.V. Body
features true-to-scale GRC Spec replica wheels, taken directly off Ken's
2013 Global RallyCross contender! These are exact replicas of the
wheels used on Ken's full-size car, even down to the color! Each wheel
is wrapped in high-performance, grippy rubber for superb performance
on all types of surfaces!
Features













Pre-Built, Ready to Run 1/18th scale
racing car
Officially licensed replica of Ken Block
2013 GRC with Ford Fiesta H.F.H.V.
Drives just like a larger RC car!
4WD for maximum control and speed
Belt drivetrain for efficient power transfer
to front wheels
Double-wishbone independent front
suspension
Coil-over inboard cantilever front shocks
Front universal dogbones
Rear straight axle for the maximum
drivetrain efficiency
Fully equipped with ball bearings for
maximum efficiency
EN-2 electronic speed control for total
control
2.4GHz radio system for long range
reception, no frequency crystals needed
180-size motor for fast speeds and quick
acceleration



6.2v 1200mAh battery for long driving
times and plenty of power
AC wall charger included for extra
convenience
4 AA batteries included for transmitter
#111224 Ken Block 2013 GRC Micro RS4 With Ford Fiesta H.F.H.V.
Body
1/18th SCALE 4WD MICRO CAR with 2.4GHz RADIO
SPECIFICATIONS:
Length: ~220mm
Width: ~105mm
Height: ~80mm
Wheelbase: 140mm
Tyre Diameter: 36mm
Drivetrain: Full-Time Belt 4WD
WHAT YOU NEED:
Absolutely nothing! All batteries and charger included to get driving right
away
Ford Motor Company Trademarks and Trade Dress used under license
to HPI RACING.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising