Lecture 2 - Access P..
DATASHEET
AX411 WIRELESS LAN
ACCESS POINT
Product Overview
The Juniper Networks AX411 is a highperformance, 802.11a/b/g/n wireless
LAN (WLAN) access point. It is a dual
band, dual radio solution that supports
data rates up to 300 Mbps. The AX411
integrates with the award winning
Product Description
The Juniper Networks® AX411 Wireless Access Point, together with Juniper Networks
SRX Series Services Gateways for the branch, extends the reach of Juniper Networks
Junos® operating system to lower deployment and operational costs across wired and
wireless environments. Using cluster cloning, operators can ease management tasks by
automating the configuration of any AX411 joining a cluster of access points. The product’s
over-the-air packet capture capabilities support centralized monitoring that allows offsite
experts to analyze traffic and resolve problems.
Juniper Networks SRX Series Services
For locations with multiple access points, the branch SRX Series provides wireless
Gateways for the branch to deliver
controller capabilities. All branch SRX Series Services Gateways can manage up to two
security throughput that leads in its
AX411 access points without the need to purchase additional software licenses. Additional
category. The AX411 is fully managed
access points can be managed with the purchase of a software licenses. The AX411
by branch SRX Series devices using
supports 802.3af Power over Ethernet (PoE) for cost-effective installations based on
Juniper Networks Junos OS. The AX411
industry standard technologies.
is an ideal wireless networking solution
By combining the SRX Series Services Gateways with the AX411 WLAN access point,
for branch offices with simple WLAN
designers can extend security and QoS architectures from wired networks to wireless
architectures.
networks. As a result, the overall infrastructure solution is consistent and secure. The
AX411 can support a variety of user and device types with multiple unique SSIDs, each
with specific security and QoS requirements.
The AX411 integrates with Juniper’s integrated convergence services capabilities on branch
SRX Series devices to extend enterprise voice over IP to untethered workers who are using
Wi-Fi-enabled endpoints
AX411 configuration options include a command-line interface (CLI) and Juniper
Networks J-Web Software on the SRX Series, in addition to centralized policy and device
management from Juniper Networks Network and Security Manager.
1
Features and Benefits
Tx power capabilities
• Easy to install and expand
- - Automatic access point cluster cloning*
- - Configuration on connect
•
•
•
•
•
• Ease to operate and manage
- - Remote packet capture*
- - Wireless PHY security integrated with Juniper zone-based
security
• Excellent end user experience and security
- - End-to-end wireless QoS treatment for simplified low latency
application support
- - Multiple SSID support for different security and application
needs
* Features supported in the future
TX power out B mode @ 11 Mbps: 20 dBm +/- 2
TX power out G mode @ 54 Mbps: 18 dBm +/- 2
TX power 11n mode @ 2.4 GHz (per chain): 16 dBm +/-2
TX power out A mode @ 54 Mbps: 14 dBm +/- 2
TX power 11n mode @ 5 GHz (per chain): 13 dBm +/- 2
RX power capabilities
RX sensitivity (8%
PER) 11b mode
@ different data
rates
1 Mbps: -96 dBm
2 Mbps: -93 dBm
5.5 Mbps: -91dBm
11 Mbps: -88 dBm
RX sensitivity
(10% PER) 11g
mode @ different
data rates
6 Mbps: -90 dBm, 9 Mbs: -89 dBm
12 Mbps: -89 dBm, 18 Mbps: -86 dBm
24 Mbps: -83 dBm, 36 Mbps: -79 dBm
48 Mbps: -75 dBm, 54 Mbps: -74 dBm
Note that these numbers are without using external
low-noise amplifier (LNA). With external LNA, the Rx
sensitivity numbers improve by 1 to 2 dBm.
RX sensitivity
(10% PER)
11n modes
AX411 WIRELESS LAN ACCESS POINT
Specifications
Draft 802.11n 2.0 capabilities
• 2x3 multiple-input multiple-output (MIMO) with two spatial
streams
• Maximal-ratio combining (MRC)
• 20 MHz and 40 MHz channels
• PHY data rates up to 300 Mbps
• Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
• Space-time block code (STBC) range enhancement support
• Reduced active power consumption (< 2.5 W per radio)
Antenna
Specification
Antenna connector
• 3 x reverse polarity SMA (RPSMA)
2
RATE/BW
SENSITIVITY
(DBM)
2.4 GHz
1
-96
2.4 GHz
11
-88
2.4 GHz
6
-90
2.4 GHz
54
-74
2.4 GHz
mo/20 MHz
-86
2.4 GHz
mo/40 MHz
-83
2.4 GHz
m15/20 MHz
-67
2.4 GHz
m15/40 MHz
-66
5 GHz
6
-89
5 GHz
54
-73
5 GHz
mo/20 MHz
-85
5 GHz
mo/40 MHz
-82
5 GHz
m15/20 MHz
-64
Frequency range: 2.4-2.5 GHz/5.15-5.875 GHz
Gain:
2.4-2.5 GHz, Gain = 3 dBi
Data rates
• 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
• 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
• 802.11n:
- - 6.5, 13.5, 7.2, 15 Mbps
- - 13, 27, 14.4, 30 Mbps
- - 19.5, 40.5, 21.7, 45 Mbps
- - 26, 54, 28.9, 60 Mbps
- - 39, 8,1 43.3, 90 Mbps
- - 52, 108, 57.8, 120 Mbps
- - 58.5, 121.5, 65, 135 Mbps
- - 65, 135, 72.2, 150 Mbps
- - 13, 27, 14.4, 30 Mbps
- - 26, 54, 28.9, 60 Mbps
- - 39, 81, 43.3, 90 Mbps
- - 52, 108, 57.8, 120 Mbps
- - 78, 162, 86.7, 180 Mbps
- - 104, 216, 115.6, 240 Mbps
- - 117, 243, 130, 270 Mbps
- - 130, 270, 144.4, 300 Mbps
BAND
5.15-5.875 GHz, Gain = 5 dBi
VSWR: VSWR < 2
Polarization: linear, vertical
Half-power beam width (HPBW)/horizontal: 360°
HPBW/vertical: 78°
Maximum power rating: 2 W (CW)
Impedance: 50 ohms (typical)
Interfaces
•
•
•
•
10/100/1000 Ethernet port
Serial console port
Optional power supply
Locking connector
Management
• Junos OS CLI, J-Web
• Network and Security Manager
Indicators
•
•
•
•
Power LED: Indicating power status of AX411
Status LED: Indicating AX411 operational status
Radio 1 LED: Indicating activity on 2.4 GHz radio
Radio 2 LED: Indicating activity on 5 GHz radio
Dimensions
• 9.5 x 5.8 x 1.9 in (242 x 147 x 48 mm)
Weight
Power draw
• 2 lb 6.3 oz (1.085 kg)
• 12.4 W
Mounting
Compliance
• Wall mount
• Desk mount
• Ceiling tile
• EMC: FCC 15B, 15C, 15E, Canada RSS-210, EN300328,
EN301893, EN301489-1, EN55022:2007, EN 55024, EN300386
• Safety: UL2043, CAN/CSA-C22.2 No. 60950-1 (2007), UL
60950-1, EN 60950-1, IEC 60950-1
• Radio Approvals: For a list of supported countries, refer to the
AX411 Certification Listing Document
• IEEE Standard: IEEE 802.11a/b/g, IEEE 802.11n draft 2.0, IEEE
802.11h, IEEE 802.11d, IEEE 802.11e
• Security: 802.11i, WEP, WPA/WPA2, 802.1X, Advanced
Encryption Standard (AES), Temporal Key Integrity Protocol
(TKIP)
Environmental
• Nonoperating (storage) temperature: –40° to 149° F
(–40° to 65° C)
• Operating temperature: –4° to +122° F (–20° to 50° C)
• Operating humidity: Up to 95% @ 25° C
System memory
• 2 MB NOR Flash
• 32 MB NAND Flash
• 64 MB DDRII RAM
Power options
• Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
• PoE: 802.3af
EAP types
•
•
•
•
•
EAP-TLS
EAP-TTLS/MSCHAPv2
PEAPv0/EAP-MSCHAPv2
PEAPv1/EAP-GTC
EAP-SIM
Antenna pattern 2.4 GHz - vertical
Antenna pattern 5 Ghz - vertical
Antenna pattern 2.4 GHz – horizontal
Antenna pattern 5 Ghz - Horizontal
3
Juniper Networks Services and Support
About Juniper Networks
Juniper Networks is the leader in performance-enabling services
Juniper Networks, Inc. is the leader in high-performance
and support, which are designed to accelerate, extend, and
networking. Juniper offers a high-performance network
optimize your high-performance network. Our services allow
infrastructure that creates a responsive and trusted environment
you to bring revenue-generating capabilities online faster so
for accelerating the deployment of services and applications
you can realize bigger productivity gains and faster rollouts of
over a single network. This fuels high-performance businesses.
new business models and ventures. At the same time, Juniper
Additional information can be found at www.juniper.net.
Networks ensures operational excellence by optimizing your
network to maintain required levels of performance, reliability, and
availability. For more details, please visit www.juniper.net/us/en/
products-services/
Ordering Information
PART NUMBER
DESCRIPTION
AX411 Wireless LAN Access Point
AX411-MNT
Wall/ceiling mount bracket for AX411
AX411-SPARE-XXX 1
AX411 spare power supply and power cord
AX411-XXX
Dual radio, 802.11abgn access point
2
SRX Series (SRX200 line, SRX650) AX411 Software Licenses
1
2
AX411-2
License support for management of up to 2 AX411
access points in a L2 Cluster
AX411-4
License support for management of up to 4 AX411
access points in a L2 Cluster
AX411-8
License support for management of up to 8 AX411
access points in a L2 Cluster
AX411-14
License support for management of up to 14 AX411
access points in a L2 Cluster
See price list for country-specific power cord model numbers.
See price list for country-specific AX411 SKUs.
Corporate and Sales Headquarters
APAC Headquarters
EMEA Headquarters
To purchase Juniper Networks solutions,
Juniper Networks, Inc.
Juniper Networks (Hong Kong)
Juniper Networks Ireland
please contact your Juniper Networks
1194 North Mathilda Avenue
26/F, Cityplaza One
Airside Business Park
Sunnyvale, CA 94089 USA
1111 King’s Road
Swords, County Dublin, Ireland
representative at 1-866-298-6428 or
Phone: 888.JUNIPER (888.586.4737)
Taikoo Shing, Hong Kong
Phone: 35.31.8903.600
or 408.745.2000
Phone: 852.2332.3636
EMEA Sales: 00800.4586.4737
Fax: 408.745.2100
Fax: 852.2574.7803
Fax: 35.31.8903.601
authorized reseller.
www.juniper.net
Copyright 2009 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Junos, NetScreen, and
ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service
marks, registered marks, or registered service marks are the property of their respective owners. Juniper Networks assumes no
responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise
revise this publication without notice.
1000300-001-EN Nov 2009
4
Printed on recycled paper
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising