Speakers and Electronics - Electro
Speakers and Electronics
www.electrovoice.com
mics • dsp • amps • speakers
2
Contents
X-Line
4
Xlvc
6
Xlc
8
XLCi
9
X-Array
10
Xi Series
11
EVA - Expandable Vertical Array
14
EVH - Horn Load
16
EVF - Front Load
18
FRi Series
20
EVI Series
22
EVID Series
24
S Series Mini Monitor
28
ZX/ZXA Series
29
Sx/SxA Series
32
Phoenix
36
QRx Series
38
Tour X
40
Force i Loudspeaker Series
42
Variplex II Systems
44
TL Series
45
SL Series
46
Compression Drivers
47
Low Frequency Transducers
48
EVM Instrument Speakers
49
Rigging and Accessories
50
Tour Grade Amplifiers
56
Precision Series Remote Control Amplifiers
58
Q Series Amplifiers MK II
60
Contractor Precision Series Amplifiers
62
Compact Precision
65
Commercial Power Amplifiers
66
NetMax Digital Matrix System
68
Signal Processors
70
3
X-Line
Install
Concert
Speakers
Live for Sound
X-Line system development was driven by the need for a
high-level concert touring system that combined the sonic
impact and vocal intelligibility of the renowned X-Array
system with the uniform, predictable coverage that only
a line-array configuration can deliver. The X-Line system
Xvls
Xvlt
Xsub(F)
provides wide horizontal dispersion from a single, vertical
line-array with exceptional coherent wavefront summation
in the vertical plane. Extended low-frequency polar control
produces more uniform power response, further enhancing
overall intelligibility.
Cabinet
• High-output, three-way line-array system
• Rectangular cabinet designed
• 90° horizontal coverage pattern ideal
for long-throw applications
• New EV® Hydra™ time-synchronized
HF vertical plane-wave generator
provides excellent far-field summing
• Ring Mode Decoupling™ (RMD™) provides
level-independent fidelity, greater midbass
clarity, and high frequency accuracy
• Proprietary rigging allows for rapid
venue load-in and load-out
• High-output, three-way line-array system
• Five-degree trapezoidal cabinet design
for lower "J" section of linear array
• 120° horizontal coverage typical for
medium-throw assignment
• New EV Hydra™ time-synchronized HF
vertical plane wave generator provides
excellent far-field summing
• Ring Mode Decoupling™ (RMD™) provides
level-independent fidelity, greater midbass
clarity, and high frequency accuracy
• Proprietary rigging allows for rapid
venue load-in and load-out
Cabinet
X-Line Two x 18" Subwoofer
• High-output, line-array subwoofer system
• Rectangular cabinet with footprint
identical to other X-Line systems
• Can be flown or ground-stacked
4
with non-flying version
• Proprietary rigging allows for rapid
venue load-in and load-out
X-Line
Install
Concert
Speakers
Live for Sound
•
XVLS
XVLT
XSub/f
Freq Range. (-3 dB)
41 Hz – 16 kHz
41 Hz – 16 kHz
33 Hz – 400 Hz
Freq. Range. (-10 dB)
28 Hz – 17 kHz
28 Hz – 17 kHz
28 Hz – 500 Hz
Horizontal Coverage
90°
120 °
—
Vertical Coverage*
5°
9°
—
LF Power Handling1
1200 W cont./4800 W peak
1200 W cont./4800 W peak
1200 W cont./4800 W peak4
MB Power Handling2
600 W cont./2400 W peak
600 W cont./2400 W peak
—
HF Power Handling3
225 W cont./900 W peak
225 W cont./900 W peak
—
Sensitivity [email protected] (LF/MB/HF)*
98/108/114 dB
97/107/114 dB
104 dB
Max. SPL (calc., peak) (LF/MB/HF)*
134/142/144 dB
133/141/144 dB
141 dB
Sensitivity** 1w/10m (Peak)
135 dB
135 dB
126 dB
LF Transducer
2 x 15-in EVX-155PL
2 x 15-in EVX-155PL
2 x 18-in EVX-180B
MB Transducer
2 x 8-in ND08
2 x 8-in ND08
—
HF Transducer
3 x 3-in ND6-16
3 x 3-in ND6-16
—
Connectors
2 Neutrik® NL8
2 Neutrik® NL8
2 Neutrik® NL8
Enclosure Material
Textured Epoxy Paint/birch plywood
Textured Epoxy Paint/birch plywood
Textured Epoxy Paint/birch plywood
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Environmental Specs
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
Dimensions (H (front/rear) x W x D) *
494.3/494.3 x 1244.6 x 740.4 mm
19.46”/19.46“ x 49 ” x 29.15”
494.3/429.7 x 1244.6 x 740.4 mm
19.46”/16.92“ x 49 ” x 29.15”
494.3/494.3 x 1244.6 x 740.4 mm
19.46”/19.46“ x 49 ” x 29.15”
Net Weight *
117 kg (257 lbs)
115 kg (253 lbs)
92 kg (202 lbs)
*Single Box @ 1 Meter. ** 4 Box Array @ 10 Meters. 1 – (50-200 Hz). 2 – (300-2000 Hz). 3 - (1200-8000 Hz). 4 - (50-100 Hz)
5
Xlvc
Install
Concert
Speakers
Live for Sound
When a line array with limited size and weight is required,
XLVC is the choice of professionals around the world.
XLVC very compact line arrays combine reliability,
XLD281
Very Compact 120° H Dual 8"Line Array System
•
•
•
•
•
XLD291
Full Bandwidth 3-way Element (60Hz-20kHz)
Very Compact, Lightweight
CCT™ (Coverage Control Technology)
120° Horizontal Coverage to 250 Hz
Simple, Quick Integrated Rigging
•
•
•
•
Versatile Subwoofer Integration
Bi-Amp or Tri-Amp Operation
Neodymium Transducers
LAPS Aiming and Flying Software
Very Compact 90° H Dual 8"Line Array System
•
•
•
•
XCS312
intelligibility and sonic horsepower in a package that is
easy to configure and suspend.
Very compact, lightweight
CCT™ (Coverage Control Technology)
Simple, quick integrated rigging
90° horizontal coverage to 200 Hz
•
•
•
•
Versatile subwoofer integration
Bi-amp or tri-amp operation
Neodymium transducers
LAPS aiming and flying software
Triple 12"Cardioid Very Compact Line-array Bass Element
• Three DVX3120 12" low-frequency transducers
• 1500 W continuous, 6000 W peak
• Versatile integration in main arrays
• Self-contained rigging hardware
• LAPS aiming and prediction software compatible
XLE181 & XLE191 Very Compact 120° or 90° H Single 8"Line Array System
•
•
•
•
6
XLE181: 120°h x 10°v
XLE191: 90°h x 10°v
Full Bandwidth 2-Way Element (75Hz-20kHz)
Most Compact, Very Lightweight
•
•
•
•
Simple, Quick Integrated Rigging
Bi-Amp or Fullrange Operation
Neodymium Transducers
LAPS Aiming and Flying Software
XLVC
Install
Concert
Speakers
Live for Sound
XLD 281
XLD 291
XLE 181
XLE 191
Freq Range. (-3 dB)
65 Hz – 16 kHz
65 Hz – 16.2 kHz
65 Hz – 16 kHz
65 Hz – 16.2 kHz
Freq. Range. (-10 dB)
56 Hz – 16.5 kHz
56 Hz – 16.7 kHz
56 Hz – 16.5 kHz
56 Hz – 16.7 kHz
Horizontal Coverage
120°
90 °
120°
90 °
200°
LF1 Power Handling1
200 W cont./800 W peak
200 W cont./800 W peak
200 W cont./800 W peak
200 W cont./800 W peak
1000 W cont./4000 W peak4
LF2 Power Handling2
200 W cont./800 W peak
200 W cont./800 W peak
—
—
500 W cont./1000 W peak4
HF Power Handling3
80 W cont./320 W peak
80 W cont./320 W peak
80 W cont./320 W peak
80 W cont./320 W peak
—
Sensitivity [email protected] (LF1&LF2/HF)*
99/112 dB
99/113 dB
99/112 dB
99/113 dB
100 dB
Max. SPL (calc., peak) (LF1&LF2/HF)*
128/137 dB
128/138 dB
128/137 dB
128/138 dB
136 dB
Sensitivity** 1w/10m (Peak)
129 dB
130 dB
129 dB
130 dB
121 dB
LF1 Transducer
1 x 8-in DVN2080
1 x 8-in DVN2080
1 x 8-in DVN2080
1 x 8-in DVN2080
2 x 12-in DVX3120A
LF2 Transducer
1 x 8-in DVN2080
1 x 8-in DVN2080
—
—
1 x 12-in DVX3120A
HF Transducer
2 x 2-in ND2S
2 x 2-in ND2S
2 x 2-in ND2S
2 x 2-in ND2S
—
Connectors
2 Neutrik® NL8
2 Neutrik® NL8
2 Neutrik® NL8
2 Neutrik® NL8
2 Neutrik® NL8
Enclosure Material
EVCoat®-coated birch plywood
EVCoat®-coated birch plywood
EVCoat®-coated birch plywood
EVCoat®-coated birch plywood
EVCoat®-coated birch plywood
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Powder-coated steel
Powder-coated steel
Environmental Specs
IEC 529 IP24
IEC 529 IP24
IEC 529 IP24
IEC 529 IP24
IEC 529 IP24
MIL STD 810
MIL STD 810
MIL STD 810
MIL STD 810
MIL STD 810
251 x 726 x 369 mm
251 x 726 x 369 mm
251 x 516 x 369 mm
251 x 516 x 369 mm
508 x 726 x 677 mm
9.9” x 28.58 ” x 14.52”
9.9” x 28.58 ” x 14.52”
9.9” x 20.3 ” x 14.52”
9.9” x 20.3 ” x 14.52”
20” x 28.58” x 26.65”
21.8 kg (48 lbs)
21.8 kg (48 lbs)
17.24 kg (38 lbs)
17.24 kg (38 lbs)
67.13 kg (148 lbs)
Dimensions (H x W x D) *
Net Weight *
*Single Box @ 1 Meter. ** 4 Box Array @ 10 Meters. 1 – (750-1750 Hz). 2 – (100-750 Hz). 3 - (1500-6500 Hz). 4 - (60-100 Hz)
XCS312
7
Xlc
Concert
Speakers
Live for Sound
Whether at a medium-sized festival, in a large concert hall
or house of worship, or as a supplementary system used
with X-Line, XLC compact line arrays have a proven record
Three-Way, High-Output
Xlc127DVX Compact Line-array Element
•
•
•
•
•
•
•
•
Xlc215
of performance and reliability. It is no wonder why XLC is
one of the most popular line array systems in the world.
Three-Way, High-Output
Xlc 907DVX Compact Line-array Element
Accurate vertical control & coverage
Compact & lightweight
Fast, simple integrated rigging
Tri-amp or optional bi-amp operation
True three-way design
LAPS aiming software
120° horizontal full-range line-array
Quik-Rig™ or fixed installation rigging
•
•
•
•
•
•
•
High-Output Dual 15" Subwoofer Line-array Element
• Compact & lightweight, 139 dB SPL
• Fast, simple integrated rigging
• Footprint identical to XLC-127DVX
• Optional adapter grid for use with XLD281
• 2 x DVX3151 transducers
• Quik-Rig™ or fixed installation rigging
Xlc 127DVX
Xlc 907DVX
Freq Range. (-3 dB)
65 Hz – 16 kHz
65 Hz – 16 kHz
Freq. Range. (-10 dB)
54 Hz – 17 kHz
54 Hz – 17 kHz
Horizontal Coverage
120°
90 °
300°
LF Power Handling1
500 W cont./2000 W peak
500 W cont./2000 W peak
1000 W cont./4000 W peak4
Xlc 215
MB Power Handling2
300 W cont./1200 W peak
300 W cont./1200 W peak
—
HF Power Handling3
150 W cont./600 W peak
150 W cont./600 W peak
—
Sensitivity [email protected] (LF/MB/HF)*
95/101/111 dB
95/101/112 dB
103 dB
Max. SPL (calc., peak) (LF/MB/HF)*
126/132/139 dB
126/132/140 dB
139 dB
Sensitivity** 1w/10m (Peak)
130 dB
130 dB
124 dB
LF Transducer
1 x 12-in DVX3121A
1 x 12-in DVX3121A
2 x 15-in DVX3151A
MB Transducer
2 x 6.5-in DVN 2065
2 x 6.5-in DVN2065
—
HF Transducer
2 x 3-in ND6-16
2 x 3-in ND6-16
—
Connectors
2 Neutrik® NL8
2 Neutrik® NL8
2 Neutrik® NL8
Enclosure Material
EVCoat®-coated birch plywood
EVCoat®-coated birch plywood
EVCoat®-coated birch plywood
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Environmental Specs
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
Dimensions (H x W x D) *
362 x 991 x 572 mm
14.25” x 39 ” x 22.5”
362 x 990 x 572 mm
14.25” x 39 ” x 22.5”
546 x 991 x 572 mm
21.5” x 39” x 22.5”
Net Weight *
50,4 kg (111 lbs)
50.4 kg (111 lbs)
54.5 kg (120 lbs)
*Single Box @ 1 Meter. ** 4 Box Array @ 10 Meters. 1 – (100-500 Hz). 2 – (500-2000 Hz). 3 - (1600-8000 Hz). 4 - (60-100 Hz)
8
Accurate vertical control & coverage
Compact & lightweight
Tri-amp or optional bi-amp operation
True three-way design
LAPS aiming software
90° horizontal full-range line-array
Quik-Rig™ or fixed
installation rigging
XLCi
Speakers
Live for Sound
Three-Way, High-Output
Xlci 127DVX Compact Line-array Element
•
•
•
•
•
•
•
Xlci 215
Three-Way, High-Output
Xlci 907DVX Compact Line-array Element
•
•
•
•
•
•
•
Accurate vertical control & coverage
Compact & lightweight
Tri-amp or optional bi-amp operation
True three-way design
LAPS aiming software
120° horizontal full-range line-array
Fixed installation rigging
Install
XLCi is the dedicated installation version of the popular XLC compact line-array featuring visually appealing rigging that
doesn't distract from building architecture.
Accurate vertical control & coverage
Compact & lightweight
Tri-amp or optional bi-amp operation
True three-way design
LAPS aiming software
90° horizontal full-range line-array
Fixed installation rigging
High-Output Dual 15" Subwoofer Line-array Element
• Compact & lightweight, 139 dB SPL
• Fast, simple integrated rigging
• Footprint identical to XLC-127DVX
• Optional adapter grid for use
with XLD281& XLD291
• 2 x DVX3151A transducers
• Fixed installation rigging
Xlci 127DVX
Xlci 907DVX
Freq Range. (-3 dB)
65 Hz – 16 kHz
65 Hz – 16 kHz
Xlci 215
Freq. Range. (-10 dB)
54 Hz – 17 kHz
54 Hz – 17 kHz
Horizontal Coverage
120°
90 °
300°
LF Power Handling1
500 W cont./2000 W peak
500 W cont./2000 W peak
1000 W cont./4000 W peak4
MB Power Handling2
300 W cont./1200 W peak
300 W cont./1200 W peak
—
HF Power Handling3
150 W cont./600 W peak
150 W cont./600 W peak
—
Sensitivity [email protected] (LF/MB/HF)*
95/101/111 dB
95/101/112 dB
103 dB
Max. SPL (calc., peak) (LF/MB/HF)*
126/132/139 dB
126/132/140 dB
139 dB
Sensitivity** 1w/10m (Peak)
130 dB
130 dB
124 dB
LF Transducer
1 x 12-in DVX3121A
1 x 12-in DVX3121A
2 x 15-in DVX3151A
MB Transducer
2 x 6.5-in DVN 2065
2 x 6.5-in DVN2065
—
HF Transducer
2 x 3-in ND6-16
2 x 3-in ND6-16
—
Connectors
2 Neutrik® NL8
2 Neutrik® NL8
2 Neutrik® NL8
Enclosure Material
EVCoat®-coated birch plywood
EVCoat®-coated birch plywood
EVCoat®-coated birch plywood
Grille
Powder-coated steel
Powder-coated steel
Powder-coated steel
Environmental Specs
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
IEC 529 IP24, MIL STD 810
Dimensions (H x W x D) *
362 x 991 x 572 mm
14.25” x 39 ” x 22.5”
362 x 990 x 572 mm
14.25” x 39 ” x 22.5”
546 x 991 x 572 mm
21.5” x 39” x 22.5”
Net Weight *
50,4 kg (111 lbs)
50.4 kg (111 lbs)
54.5 kg (120 lbs)
*Single Box @ 1 Meter. ** 4 Box Array @ 10 Meters. 1 – (100-500 Hz). 2 – (500-2000 Hz). 3 - (1600-8000 Hz). 4 - (60-100 Hz)
9
X-Array
Concert
Speakers
Live for Sound
Install
X-Array traditional horizontal array systems provide world class performance and flexibility for the ultimate in concert
touring reinforcement.
Xw12A
Floor-Monitor
Xw15A
Floor-Monitor
• 2-way high-output Floor monitor
• Vented LF enclosure
• 3" voice coil (titanium
diaphragm) for low distortion
• Two symmetrical 55° angles
• 2-way high-output Floor monitor
• Vented LF enclosure
• 3" voice coil (titanium
diaphragm) for low distortion
• Two symmetrical 55° angles
10
Xw12A
Xw15A
Frequency Range (-3 dB)
65 Hz - 16 KHz
55 Hz - 18 KHz
Recommended High-Pass Frequency
Systemcontroller
Systemcontroller
Axial Sensitivity SPL 1W/1m
98/110 dB
99/110 dB
Max. SPL / 1m (calc.); full space
129/135 dB
133/135 dB
Long-Term Power Handling
300/75 W
600/75 W
Short-Term Power Handling (Peak)
1.200/300 W
2.400/300 W
Coverage (nominal -6 dB) H° x V°
55° x 80° (CD Horn)
55° x 80° (CD Horn)
Directivity Index
11.6 dB (+2.3/-2.1dB)
11.6 dB (+3.0/-3.6dB)
1,200 Hz - 16 KHz
1,200 Hz - 16 KHz
LF woofer (transducer)
12” (DL12ST)
15” (EVX-155)
MB woofer (transducer)
---
---
HF throat diameter (transducer)
1.4” (ND6-16)
1.4” (ND6-16)
Crossover Frequencies
Factory preset
Factory preset
Nominal Impedance
8 Ω/16 Ω
8 Ω/16 Ω
Minimum Impedance
8.2 Ω/10.5 Ω
7.2 Ω/14.3 Ω
Input Connections
2 four-pin Speakon
2 four-pin Speakon
Dimensions (H x W at front x D)
534 x 449 x 313 mm
23” x 17.2” x 12.2”
(in floor position)
644 x 452 x 340 mm
25.4” x 18” x 13.4”
(in floor position)
Net Weight
21.9 kg (48 lbs.)
28.4 kg (62.5 lbs.)
Xi Series
The Electro-Voice Xi-Series brings premium, tourquality sound to installation. Inspired by the features of
EV's acclaimed X-Array touring systems, the Xi-Series
incorporates a potent combination of high-output and
ultra-linear short, medium, and long-throw systems in
two-way, three-way, and four-way configurations. Xi-Series
loudspeakers incorporate the acoustic advantage of EV's
Ring-Mode Decoupling (RMD™), and features HP horns
to secure excellent directivity control and even coverage.
The three-way systems can be operated in a Vertical
Beam Shaping (VBS) configuration using EV digital signal
processors or EV DSP-equipped amplifiers.This unique
approach extends the vertical coverage angle control as
low as 125Hz - well below that permitted by the mid-bass
horn alone (about 800Hz). These can be thought of as
two and three-element, low-frequency line arrays. This
extraordinary low-frequency control is achieved through
optimized woofer placement in conjunction with presets
that overlap individual components (using All Pass Filters).
To achieve sound performance without compromises,
Xi-Series is designed for multi-way active operation,
except the Xi-1082, which contains a passive crossover
network.Xi-Series is made of 18 mm, 13-ply birch plywood
finished in black, textured paint and full-face protected
by a powder-coated, steel front-grille backed with foam.
These horn-loaded systems, except Xi-1123A/106F and
Xi-212A3/106F, have an identical footprint for an uniform
look. All systems, except the Xi-1082, have integrated
handles and two L-Tracks on the top and bottom. A
detailed "Flying manual" is available.
Install
Speakers
Live for Sound
Xi-1082
• 2-Way Full-range
• Vented LF enclosure
• 1.25" voice coil (titanium diaphragm)
Xi-1152A/64F
Xi-1122A/85F
•
•
•
•
•
• Typical under-balcony slant also perfect
• for front-stage and near-field use
• 2 x 3/8"-16 mounting bracket inserts
2-Way Full-range
Vented LF enclosure
3" voice coil (titanium diaphragm) HF
Integrated 35 mm stand mount
Trapezoidal (15° per side)
Xi-1123A/106F
•
•
•
•
•
•
•
•
•
•
•
Xi-1152A/94F
2-Way Full-range
Solid bass down to 50 Hz (-3 dB)
Vented LF enclosure
3" voice coil (titanium diaphragm) HF
Integrated 35 mm stand mount
Trapezoidal (15° per side)
Xi-2123A/106F
3-Way High-Output Full-range
Vented slot load designed LF enclosure
Horn-loaded MB/HF section fully rotatable
3" voice coil (titanium diaphragm) HF
Bypassable MB/HF passive crossover
• VBS mode brings vertical directivity
control down to 250 Hz
• Excellent directivity 500 Hz – 16 kHz
• Trapezoidal (9° per side)
11
Xi-Series
Speakers
Live for Sound
Install
Xi-1191A
Xi-2181A
•
•
•
•
•
Xi-1122MHA/64F
1 x 18" Subwoofer 1191 (F)
2 x 18" Subwoofer 2181 (F)
Vented design
Superior linear excursion capability
Accurate transient detail trapezoidal (9° per side)
Xi-1183A/64F
•
•
•
•
•
60° x 40° for near and mid field
MB/HF section horn-loaded
Excellent directivity control
Trapezoidal (9° per side)
3" voice coil (titanium diaphragm) HF
Xi-1153A/64F
•
•
•
•
3-Way High-Output Full-range
Vented slot load designed LF enclosure
Coaxial horn-loaded MB/HF section fully rotatable
3" voice coil (titanium diaphragm) HF
• VBS for vertical directivity control down to 300 Hz
• Excellent directivity control
• Trapezoidal (9° per side)
Xi-2122MHA
• 2-Way output Far-field
• MB/HF section horn-loaded
• Excellent directivity control
• Trapezoidal (9° per side)
• 3" voice coil (titanium diaphragm) HF
Xi-2153A/64F
•
•
•
•
12
3-Way High-Output Full-range
Vented slot load designed LF enclosure
Coaxial horn-loaded MB/HF section fully rotatable
3" voice coil (titanium diaphragm) HF
• VBS mode brings vertical directivity
control down to 150 Hz
• Excellent directivity control
• Trapezoidal (9° per side)
Xi-1082
Xi-1122A/85F
Xi-1152A/64F
Xi-1152A/94F
50 Hz - 20 kHz
58 Hz - 17 kHz
50 Hz - 16 kHz
50 Hz - 16 kHz
Recommended High-Pass Frequency
60-80 Hz (12 dB/Oct.)
Dx46 preset
Dx46 preset
Dx46 preset
Axial Sensitivity SPL 1W/1m
90 dB
99/110 dB
98/113 dB
98/112 dB
Max. SPL / 1m (calc.); full space
118 dB
130/135 dB
132/138 dB
132/137 dB
Long-Term Power Handling
175 W
300/75 W
600/75 W
600/75 W
Short-Term Power Handling (Peak)
700 W
1.200/300 W
2.400/300 W
2.400/300 W
Coverage (nominal -6 dB) H° x V°
90° x 40° (CD Horn)
80° x 55° (CD Horn)
60° x 40° (CD Horn)
90° x 40° (CD Horn)
Directivity Index
11.2 dB (+1.8/-2.7 dB)
2.000 - 20.000 Hz
10.9 dB (+1.2/-2.9 dB)
1.200 - 16.000 Hz
13.4 dB (+1.3/-2.3 dB)
1.200 - 16.000 Hz
12.3 dB (+0.7/-1.5 dB)
1.200 - 16.000 Hz
LF woofer (transducer)
8” (---)
12” (DL-type)
15” (EVX-155)
15” (EVX-155)
HF throat diameter (transducer)
1” (DH3)
1.4” (ND6-16)
1.4” (ND6-16)
1.4” (ND6-16)
Crossover Frequencies
3,500 Hz (passive)
Dx46 preset
Dx46 preset
Dx46 preset
Nominal Impedance
8Ω
8 Ω/16 Ω
8 Ω/16 Ω
8 Ω/16 Ω
Minimum Impedance
5.8 Ω
8.5 Ω/13.4 Ω
6.3 Ω/14.0 Ω
6.3 Ω/12.2 Ω
Input Connections
barrier strip
2 four-pin Speakon
2 four-pin Speakon
2 four-pin Speakon
Dimensions (H x W at front x D)
235 x 488 x 285 mm
9.25” x 11.21” x 11.22”
584 x 375 x 356 mm
22.99” x 14.76” x 14.01”
759 x 450 x 413 mm
29.88” x 17.72” x 16.26”
759 x 450 x 413 mm
29.88” x 17.72” x 16.26”
Net Weight
13.3 kg (29.3 lbs.)
31.3 kg (69 lbs.)
40.8 kg (89.9 lbs.)
40.8 kg (89.9 lbs.)
Xi-1123A/106F
Xi-2123A/106F
Xi-1183A/64F
Xi-1153A/64F
Xi-1122MH64
75 Hz - 17 kHz
62 Hz - 18 kHz
66 Hz - 17 kHz
48 Hz - 17 kHz
125 Hz - 20 kHz
Frequency Range (-3 dB)
Recommended High-Pass Frequency
Dx46 preset
Dx46 preset
Dx46 preset
Dx46 preset
Dx46 preset
Axial Sensitivity SPL 1W/1m
96/107/112 dB
100/107/112 dB
96/107/112 dB
91.5/107/112 dB
110/112 dB
Max. SPL / 1m (calc.); full space
129/140/137 dB
135/140/137 dB
128/138/137 dB
125/138/137 dB
141/137 dB
Long-Term Power Handling
300/300/75 W
600/300/75 W
600/300/75 W
600/300/75 W
300/75 W
Short-Term Power Handling (Peak)
1.200/1.200/300 W
2.400/1.200/300 W
2.400/1.200/300 W
2.400/1.200/300 W
1.200/300 W
Coverage (nominal -6 dB) H° x V°
100° x 60° (CD Horn)
100° x 60° (CD Horn)
60° x 40° (CD Horn)
60° x 40° (CD Horn)
60° x 40° (CD Horn)
Directivity Index
10.3 dB (+1.4/-1.2 dB)
500 - 16.000 Hz
10.1 dB (+1.6/-3.5 dB)
160 - 16.000 Hz
13.3 dB (+1.4/-1.1dB)
800 - 16.000 Hz
13.3 dB (+1.4/-1.1dB)
800 - 16.000 Hz
13.4 dB (+2.0/-1.8 dB)
800 - 16.000 Hz
LF woofer (transducer)
12” (DL-type)
2 x 12” (DL-type)
18” (EVX-180B)
15” (EVX-155)
---
MB woofer (transducer)
10” (DL-type)
10” (DL-type)
12” (ND-12)
12” (DL12ST)
12” (ND-12)
HF throat diameter (transducer)
1.4 (ND6-16)
1.4 (ND6-16)
1.4” (ND6-16)
1.4” (ND6-16)
1.4” (ND6-16)
Crossover Frequencies
Dx46 preset
Dx46 preset
Dx46 preset
Dx46 preset
Dx46 preset
Nominal Impedance
16 Ω/12 Ω/16Ω
8 Ω/12 Ω/16Ω
8 Ω/12 Ω/16Ω
8 Ω/12 Ω/16
16 Ω/16
Minimum Impedance
9.2 Ω/8.5 Ω/14.6 Ω
4.6 Ω/8.5 Ω/14.6 Ω
7.1 Ω/8.7 Ω/14.6 Ω
7.4 Ω/8.7 Ω/14.6
9.9 Ω/12.9
Input Connections
2 eight-pin Speakon
2 eight-pin Speakon
2 eight-pin Speakon.
2 eight-pin Speakon.
2 eight-pin Speakon
Dimensions (H x W at front x D)
801 x 456 x 473 mm
31.54” x 17.95 x 18.62”
1007 x 456 x 473 mm
39.65” x 17.95” x 18.62”
914 x 586 x 759 mm
36” x 23.07” x 29.88”
914 x 586 x 759 mm
36” x 23.07” x 29.88”
596 x 584 x 759 mm
23.47” x 22.99” x 29.88”
Net Weight
52.2 kg ( 115 lbs.)
68.0 kg (149.9 lbs.)
93.0 kg (205 lbs.)
93.0 kg (205 lbs.)
61 kg (136 lbs.)
Xi-2153A/64 F
Xi-1191A (F)
Xi-2181A (F)
Xi-2122MHA/42F
Frequency Range (-3 dB)
55 Hz - 18 kHz
37 Hz - 160 Hz
38 Hz - 160 Hz
120 Hz - 16 kHz
Recommended High-Pass Frequency
Dx46 preset
Dx46 preset
Dx46 preset
Dx46 preset
Axial Sensitivity SPL 1W/1m
100/107/112 dB
94 dB
99 dB
112/116 dB
Max. SPL / 1m (calc.); full space
133/138/137 dB
128 dB
136 dB
146/144 dB
Long-Term Power Handling
1.200/300/75 W
600 W
1.200 W
600/150 W
Short-Term Power Handling (Peak)
4.800/1.200/300 W
2.400 W
4.800 W
2.400/600 W
Coverage (nominal -6 dB) H° x V°
60° x 40° (CD Horn)
essentially omni
essentially omni
40° x 20°(CD Horn)
Directivity Index
13.4 dB (+1.4/-1.2 dB)
800 - 16.000 Hz
2.7 dB (+1.0/-0.6dB)
63 - 100 Hz
3.4 dB (+1.4/-0.9dB)
63 - 200 Hz
17.2 dB (+2.0/-2.7 dB)
800 - 16.000 Hz
LF woofer (transducer)
2 x 15” (EVX-155)
18” (EVX-180B)
2 x 18” (EVX-180B)
---
MB woofer (transducer)
12” (DL12ST))
---
---
2 x 12” (ND12)
HF throat diameter (transducer)
1.4” (ND6-16)
---
---
2 X 1.4” (ND6-16)
Crossover Frequencies
Dx46 preset
Dx46 preset
Dx46 preset
Dx46 preset
Nominal Impedance
4 Ω/12 Ω/16Ω
8Ω
2x8Ω
6 Ω/8Ω
Minimum Impedance
3.8 Ω/8.7 Ω/14.6 Ω
6.7 Ω
2 x 6.0 Ω
4.9 /7.3
Input Connections
2 eight-pin Speakon
2 eight-pin Speakon
2 eight-pin Speakon
2 eight-pin Speakon
Dimensions (H x W at front x D)
1.233 x 586 x 759 mm
48.54” x 23.07” x 29.88”
914 x 586 x 759 mm
35.98” x 23.07” x 29.88”
914 x 586 x 759 mm
35.98” x 23.07” x 29.88”
914 x 584 x 759 mm
35.98” x 22.99” x 29.88”
Net Weight
109 kg (240 lbs.)
68.0 kg (149.9 lbs.)
83.5 kg (184 lbs)
86.3 kg (190 lbs.)
Install
Frequency Range (-3 dB)
Speakers
Xi-Series
Live for Sound
13
EVA - Expandable Vertical Array
Install
Speakers
Live for Sound
The EVA series (Expandable Vertical Array) is an elegantly
simple solution for installed sound applications. EVA offers
true line-array performance from the patented Hydra plane
wave generator. The sophisticated internal crossover
allows up to eight EVA boxes to be powered by a single
amplifier channel with no additional DSP required. The
internal hidden rigging not only looks great, but also makes
EVA incredibly easy to install.
EVA-2082S 1220 Full-Range Dual Element Line Array Module
•
•
•
•
•
EVA-2082S 126
True line-array performance
120° horizontal coverage pattern
20° vertical coverage pattern
104 dB sensitivity
Hidden suspension hardware (included)
•
•
•
•
architecturally pleasing
Three finishes available – indoor, PI and fiberglass
EVADA (EVA Design Assistant) software tool
Single amplifier channel drive
configuration for entire array
• Advanced sixth-order crossover
network with HF protection
Full-Range Dual Element Line Array Module
•
•
•
•
•
True line array performance
120° horizontal coverage pattern
6° vertical coverage pattern
104 dB sensitivity
Hidden suspension hardware (included)
– architecturally pleasing
• Three finishes available – indoor, PI and fiberglass
• EVADA (EVA Design Assistant) software tool
• Single amplifier channel drive
configuration for entire array
• Advanced sixth-order crossover
network with HF protection
EVA-2082S 906 Full-Range Dual Element Line Array Module
•
•
•
•
•
True line-array performance
90° horizontal coverage pattern
6° vertical coverage pattern
104 dB sensitivity
Hidden suspension hardware (included) –
architecturally pleasing
• Three finishes available – indoor,
PI and fiberglass
• EVADA (EVA Design Assistant) software tool
• Single amplifier channel drive
configuration for entire array
• # Advanced sixth-order crossover
network with HF protection
EVA-2082S 920 Full-Range Dual Element Line Array Module
•
•
•
•
•
True line-array performance
90° horizontal coverage pattern
2° vertical coverage pattern
104 dB sensitivity
Hidden suspension hardware (included)
– architecturally pleasing
• Three finishes available – indoor, PI and fiberglass
14
• EVADA (EVA Design Assistant) software tool
• Single amplifier channel drive
configuration for entire array
• Advanced sixth-order crossover
network with HF protection
Single 15-inch subwoofer
• DVX3159A 15” (381 mm) LF transducer
with fully symmetric drive
• System rating: 500 W continuous, 2000 W peak
• Easily configures to cardioid directional pattern
for low-frequency control and feedback reduction
• Hidden suspension hardware (included)
EVA-2151D
•
•
•
•
architecturally pleasing
Three finishes available – indoor, PI and fiberglass
EVADA (EVA Design Assistant) software tool
Single amplifier channel drive
configuration for entire array
• Advanced sixth-order crossover
network with HF protection
Dual 15-inch subwoofer
• Dual DVX3159A 15” (381 mm) LF
transducers with fully symmetric drive
• System rating: 1000 W continuous, 4000 W peak
• Easily configures to cardioid directional pattern
for low-frequency control and feedback reduction
• Hidden suspension hardware (included)
•
•
•
•
architecturally pleasing
Three finishes available – indoor, PI and fiberglass
EVADA (EVA Design Assistant) software tool
Single amplifier channel drive
configuration for entire array
• Advanced sixth-order crossover
network with HF protection
EVA has an internal, nearly invisible rigging
EVA-SG2 (Standard Grid)
system. Modules are connected to one another
For typical tilt angles in 3 and 4 module arrays
with an internal top-to-bottom metal structure
and pull-up applications in large arrays when
that is hidden by the cover panels. This gives
extreme angles are required. Includes one
an EVA cluster great aesthetic appeal—more
spreader bar.
an architectural element than a loudspeaker
EVA-EG2 (Extended Grid)
system. The rigging system is designed to
For typical tilt angles in arrays taller than four
carry an array of up to eight modules with a
modules, or extreme angles in arrays of four
safety factor of >8:1.
modules or less. Includes one spreader bar.
EVA-1151D
EVA-2151D
Frequency Response
(-3 dB)
60 - 19000 Hz
EVA-2082S 1220
EVA-2082S 126
EVA-2082S 906
EVA-2082S 920
50 - 160
45 - 160
Recommended HighPass Frequency
50 Hz
35 Hz
35 Hz
Sensitivity 1 W/1 m
104 dB 3 module array
94 dB (Whole Space)
97 dB (Whole Space)
Max. SPL/1m (calc)
135 dB
127 (Whole Space)
133 (Whole Space)
System Power Handling
(Continuous/Program/
Peak)
350 Watts
500 Watts
1000 Watts
Nominal Impedance
(Passive)
16 Ω
8Ω
4Ω
Input Connections
Phoenix/Euroblock style screw terminals
Phoenix Euroblock
Phoenix Euroblock
Frequency Response
(-10 dB)
45 - 20000 Hz
39 - 160
33 - 160
Coverage(Nominal -6
dB) H°
120 °
120 °
90 °
90 °
Omnidirectional
Omnidirectional
Coverage(Nominal -6
dB) V°
20 °
6°
6°
20 °
Omnidirectional
Omnidirectional
LF Transducer
(2) EVS2008, 8 In (203mm) Driver
DVX3159A
DVX3159A (X2)
HF Transducer
(4) DH2005, 1.25 In (32mm) Diaphragm Compression Driver
None
None
Crossover Frequency
1740 Hz
100 Hz Active
100 Hz Active
Minimum Impedance
12 Ω
6Ω
3Ω
Birch Plywood
Birch Plywood
Enclosure Material
Birch and Pine Plywood
Grill
16 GA Galvanneal, Powder-coated (PI Version - Stainless Steel with Hydrophobic Cloth
Suspension
EVA Grid (Sold Separately)
Height
Width
Depth
20.17 in (512.2 mm)
23.5 in (596.9 mm)
14.53 in (369.1 mm)
20.25 in (514.4 mm)
23.5 in (596.9 mm)
14.1 in (358.2 mm)
20.25 in (514.4 mm)
23.5 in (596.9 mm)
14.1 in (358.2 mm)
20.17 in (512.2 mm)
23.5 in (596.9 mm)
14.53 in (369.1 mm)
23.5" (596.9mm)
23.5" (596.9mm)
18.16" (461.3mm)
31.0" (787.4mm)
23.5" (596.9mm)
31.32" (795.5mm)
Weight Net
76.19 lbs (34.513.23 lbs (6 kg))
79.06 lbs (35.813.23 lbs (6 kg))
79.06 lbs (35.813.23 lbs (6 kg))
76.19 lbs (34.513.23 lbs (6 kg))
100 Lbs
172 Lbs
Install
EVA-1151D
Speakers
EVA - Expandable Vertical Array
Live for Sound
15
EVH - Horn Load
Install
Speakers
Live for Sound
The global success of the FRX and FRX+ series
affirms Electro-Voice’s approach to coaxial horn-loaded
loudspeakers for venues of all sizes. The EVH series
condenses all this experience into a new, dedicated
solution for installed sound applications. EVH represents
a unique design concept: maintain directivity control all
the way down to 500 Hz in a mid-sized, 15-inch two-way,
coaxial horn-loaded configuration that offers exceptional
value, while providing an unusually high degree of rigging
flexibility and six available coverage patterns (ranging from
60 x 40 to 90 x 90).
This premium component provides improved dynamic
performance, including reduced distortion and power
compression.
EVH loudspeakers are available with a choice of two
woofer/compression driver combinations. The EVH-1152S
is equipped with an SMX215115-inch 400-W woofer
and one ND2B medium-format, 2-inch diaphragm, 40-W
high-frequency compression driver on a 12-inch-square
waveguide. The EVH-1152D features the same woofer
and the new DH7N large-format compression driver with a
3-inch diaphragm and neodymium magnetic structure.
• (28) M10 threaded suspension points
EVH-1152S
EVH series features include
• All-new high performance components in choice of two
configurations (“S” & “D”)
• Six available coverage patterns on rotatable Constant
DirectivityTM waveguides
• Advanced fourth-order crossover network with HF
protection
• PI (indirect weather exposure) version available, with
gland nut and stainless-steel grille
• Unique input panel – designed from installer’s
perspective with a range of innovative, user-friendly
features
• Wide range of available rigging options and accessories
Two-Way Coaxial Full-Range High-Efficiency Loudspeaker System
• ND2B 2" (51 mm) diaphragm 1.4(36 mm)exit pure titanium compression driver
• SMX2151 15" (381 mm) LF transducer
with fully symmetric drive
• Advanced fourth-order crossover
network with HF protection
• Various coverage patterns: Constant
Directivity rotatable waveguides
EVH-1152D
Two-Way Coaxial Full-Range High-Efficiency Loudspeaker System
• DH7N 3" (76 mm) diaphragm 1.4(36 mm)exit pure titanium compression driver
• SMX2151 15" (381 mm) LF transducer
with fully symmetric drive
• Advanced fourth-order crossover
network with HF protection
• Various coverage patterns: Constant
Directivity rotatable waveguides
16
• 106 dB sensitivity, 139 dB maximum SPL
• System rating: 500 W continuous, 2000 W peak
• Active rating: LF 400 W / HF 40 W
continuous (1600 W / 160 W peak)
• (28) M10 threaded suspension points
• PI and FG version available with gland
nut and stainless steel grille
• 106 dB sensitivity, 139 dB maximum SPL
• System rating: 500 W continuous, 2000 W peak
• Active rating: LF 400 W / HF 75 W
continuous (1600 W / 300 W peak)
• M10 threaded suspension points
• PI and FG version available with gland
nut and stainless steel grille
EVH1152S/43
EVH1152S/64
EVH1152S/66
EVH1152S/94
EVH1152S/96
EVH1152S/99
Frequency Response (-3 dB)
60 – 15000 Hz1
Frequency Response (-10 dB)
50 – 16000 Hz1
Recommended High-Pass Frequency
60 Hz
Sensitivity 1 W/1 m
106 dB
105 dB
104 dB
Max. SPL/1 m (Calculated) Peak
139 dB
138 dB
137 dB
System Power Handling (Continuous2/Program/Peak)
500 W / 1000 W / 2000 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Input Connections
Phoenix/Euroblock style screw terminals
PI and FG versions include dual-gland-nut input-panel cover
40 °
60 °
60 °
90 °
90 °
90 °
30 °
40 °
60 °
40 °
60 °
90 °
LF Transducer
SMX2151, 15-in (381 mm) Driver
HF Transducer
ND2B, 2-in (51 mm) Diaphragm Compression Driver
Internal Passive Crossover Frequency
1300 Hz
Enclosure Material
13-ply Weather-Resistant Birch
Grille
Standard versions: 16-ga Galvanneal, Powdercoat, with screen behind
PI and FG versions: 18-ga Stainless, Powdercoat, with hydrophobic cloth behind
Environmental
Standard versions: IEC 60529 IP33
PI and FG versions: IEC 60529 IP55
Suspension
(28) M10 Threaded Points (one EBK-M10-EVI kit of four forged eyebolts included)
Height
Width
Depth
30.26 in (768.6 mm)
30.26 in (768.6 mm)
26.77 in (680.1 mm)
Net Weight
143 lb (64.9 kg)
EVH1152D/94
EVH1152D/96
EVH1152D/99
EVH1152D/43
Frequency Response (-3 dB)
60 – 17000 Hz1
Frequency Response (-10 dB)
50 – 20000 Hz1
Recommended High-Pass Frequency
60 Hz
EVH1152D/64
Install
Coverage (Nominal -6 dB) H°
Coverage (Nominal -6 dB) V°
Speakers
EVH - Horn Load
Live for Sound
EVH1152D/66
Sensitivity 1 W/1 m
106 dB
105 dB
104 dB
Max. SPL/1 m (Calculated) Peak
139 dB
138 dB
137 dB
System Power Handling (Continuous2/Program/Peak) 500 W / 1000 W / 2000 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Input Connections
Phoenix/Euroblock style screw terminals
PI and FG versions include dual-gland-nut input-panel cover
Coverage (Nominal -6 dB) H°
40 °
60 °
60 °
90 °
90 °
90 °
Coverage (Nominal -6 dB) V°
30 °
40 °
60 °
40 °
60 °
90 °
LF Transducer
SMX2151, 15-in (381 mm) Driver
HF Transducer
DH7N, 3-in (76 mm) Diaphragm Compression Driver
Internal Passive Crossover Frequency
1300 Hz
Enclosure Material
13-ply Weather-Resistant Birch
Grille
Standard versions: 16-ga Galvanneal, Powdercoat, with screen behind
PI and FG versions: 18-ga Stainless, Powdercoat, with hydrophobic cloth behind
Environmental
Standard versions: IEC 60529 IP33
PI and FG versions: IEC 60529 IP55
Suspension
(28) M10 Threaded Points (one EBK-M10-EVI kit of four forged eyebolts included)
Height
Width
Depth
30.26 in (768.6 mm)
30.26 in (768.6 mm)
26.77 in (680.1 mm)
Net Weight
145.5 lb (66.1 kg)
1 Half-space measurement in passive mode
2 EIA RS-426A (eight hours)
17
EVF - Front Load
Install
Speakers
Live for Sound
EVF is the most comprehensive series of front-loaded
loudspeaker systems ever offered for installed sound.
Available in 12- or 15-inch two way configurations
with a range of coverage patterns, and enhanced with
dedicated low-frequency systems, EVF loudspeakers
match exceptional audio performance, efficiency, easeof-use, and aesthetics with unprecedented value. EVF
systems employ the latest Electro-Voice components to
ensure years of reliable use and consistently excellent
sound. “S”-designated systems are equipped with SMX
series woofers and ND2B 2-inch compression drivers;
“D”-designated systems are equipped with the highestperformance DVX series woofers and the new DH7N
3-inch compression driver.
EVF series features include:
• Seven available coverage patterns aid the design process
• High maximum SPL output capability with extremely
low distortion
• All 12- and 15-inch enclosures and the 18-inch subwoofer
have the same height, promoting attractive clusters
• Biampable, but sophisticated internal crossover/EQ
networks make cost-saving passive operation very attractive
• Available in black or white in one of three versions:
EVCoat™ (interior use), PI (indirect weather exposure),
and FG (fiberglass – direct exposure)
• Unique input panel – designed from installer’s
perspective with a range of innovative, user-friendly features
• Wide range of available rigging options and accessories
EVF1122S/64
18
EVF1122S/66
EVF1122S/94
EVF1122S/96
EVF1122S/99
EVF1122S/126
Frequency Response (-3 dB)
58 – 16000 Hz1,2
Frequency Response (-10 dB)
49 – 19000 Hz1,2
Recommended High-Pass Frequency
65 Hz
Sensitivity 1 W/1 m
98 dB
Max. SPL/1 m (Calculated) Peak
131 dB
System Power Handling (Continuous3/Program/Peak)
500 W / 1000 W / 2000 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Input Connections
Phoenix/Euroblock style screw terminals
PI and FG versions include dual-gland-nut input-panel cover
Coverage (Nominal -6 dB) H°
60 °
60 °
90 °
90 °
90 °
120 °
Coverage (Nominal -6 dB) V°
40 °
60 °
40 °
60 °
90 °
60 °
LF Transducer
SMX2121, 12-in (305 mm) Driver
HF Transducer
ND2B, 2-in (51 mm) Diaphragm Compression Driver
Internal Passive Crossover Frequency
1450 Hz
Enclosure Material
13-ply Weather-Resistant Birch
Grille
Standard versions: 16-ga Galvanneal, Powdercoat, with screen behind
PI and FG versions: 18-ga Stainless, Powdercoat, with hydrophobic cloth behind
Environmental
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Suspension
(22) M10 Threaded Points (one EBK-M10-EVI kit of four forged eyebolts included)
Height
Width
Depth
30.26 in (768.6 mm)
16 in (406.3 mm)
16.27 in (413.3 mm)
Net Weight
63.1 lb (28.6 kg)
EVF - Front Load
Speakers
Live for Sound
• ND2B 2” (51 mm) diaphragm, 1.4” (36 mm)exit pure titanium compression driver
• SMX2121 12” (305 mm) LF transducer
with fully symmetric drive
• Advanced fourth-order crossover
network with HF protection
• Coverage pattern: 120° x 60° Constant
Directivity™ 12” rotatable waveguide
EVF-1152S
• 98 dB sensitivity, 131 dB maximum SPL
• System rating: 500 W continuous, (2000 W peak)
• Active rating: LF 400 W / HF 40 W
continuous (1600 W / 160 W peak)
• # (22) M10 threaded suspension points
• # PI version available with gland
nut and stainless steel grille
Two-Way Full-Range Loudspeaker System
• ND2B 2" (51 mm) diaphragm 1.4" (36 mm)exit pure titanium compression driver
• SMX2151 15" (381 mm) LF transducer
with fully symmetric drive
• Advanced fourth-order crossover
network with HF protection
• Coverage pattern: 40° x 30° Constant
Directivity™ 12" rotatable waveguide
EVF1152S/43
EVF1152S/64
• 101 dB sensitivity, 134 dB maximum SPL
• System rating: 500 W continuous, (2000 W peak)
• Active rating: LF 400 W / HF 40 W
continuous (1600 W / 160 W peak)
• (22) M10 threaded suspension points
• PI version available with gland nut
and stainless steel grille
EVF1152S/66
EVF1152S/94
EVF1152S/96
EVF1152S/99
Frequency Response (-3 dB)
70 – 14000 Hz1,2
Frequency Response (-10 dB)
41 – 18000 Hz1,2
Recommended High-Pass Frequency
45 Hz
Sensitivity 1 W/1 m
101 dB
Max. SPL/1 m (Calculated) Peak
134 dB
System Power Handling (Continuous3/Program/Peak)
500 W / 1000 W / 2000 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Input Connections
Phoenix/Euroblock style screw terminals
PI and FG versions include dual-gland-nut input-panel cover
Coverage (Nominal -6 dB) H°
40 °
60 °
60 °
90 °
90 °
90 °
Coverage (Nominal -6 dB) V°
30 °
40 °
60 °
40 °
60 °
90 °
LF Transducer
SMX2151, 15-in (381 mm) Driver
HF Transducer
ND2B, 2-in (51 mm) Diaphragm Compression Driver
Internal Passive Crossover Frequency
1450 Hz
Enclosure Material
13-ply Weather-Resistant Birch
Grille
Standard versions: 16-ga Galvanneal, Powdercoat, with screen behind
PI and FG versions: 18-ga Stainless, Powdercoat, with hydrophobic cloth behind
Environmental
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Suspension
(22) M10 Threaded Points (one EBK-M10-EVI kit of four forged eyebolts included)
Height
Width
Depth
30.26 in (768.6 mm)
18.5 in (469.8 mm)
18.37 in (466.6 mm)
Net Weight
70.9 lb (32.1 kg)
1 Half-space measurement in passive mode
2 FG (full outdoors) versions have no enclosure vents, somewhat reducing their low frequency response
3 EIA RS-426A (eight hours)
Install
Two-Way Full-Range Loudspeaker System
Mobile Audio
EVF-1122S
19
EVF - Front Load
Install
Speakers
Live for Sound
EVF-1122D
Two-Way Full-Range Loudspeaker System
• ND2B 2” (51 mm) diaphragm, 1.4” (36 mm)exit pure titanium compression driver
• SMX2121 12” (305 mm) LF transducer
with fully symmetric drive
• Advanced fourth-order crossover
network with HF protection
• Coverage pattern: 120° x 60° Constant
Directivity™ 12” rotatable waveguide
EVF1122D/64
20
EVF1122D/66
EVF1122D/94
• 98 dB sensitivity, 131 dB maximum SPL
• System rating: 500 W continuous, (2000 W peak)
• Active rating: LF 400 W / HF 40 W
continuous (1600 W / 160 W peak)
• # (22) M10 threaded suspension points
• # PI version available with gland
nut and stainless steel grille
EVF1122D/96
EVF1122D/99
EVF1122D/126
Frequency Response (-3 dB)
57 – 18000 Hz1,2
Frequency Response (-10 dB)
49 – 21000 Hz1,2
Recommended High-Pass Frequency
65 Hz
Sensitivity1 1 W/1 m
97 dB
Max. SPL/1 m (Calculated)1
131 dB
System Power Handling (Continuous3/Program/Peak)
600 W / 1200 W / 2400 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Input Connections
Phoenix/Euroblock style screw terminals
PI and FG versions include dual-gland-nut input-panel cover
Coverage (Nominal -6 dB) H°
60 °
60 °
90 °
90 °
90 °
120 °
Coverage (Nominal -6 dB) V°
40 °
60 °
40 °
60 °
90 °
60 °
LF Transducer
DVX3121A, 12-in (305 mm) Woofer
HF Transducer
DH7N, 3-in (76 mm) Diaphragm Compression Driver
Internal Passive Crossover Frequency
1300 Hz
Enclosure Material
13-ply Weather-Resistant Birch
Grille
Standard versions: 16-ga Galvanneal, Powdercoat, with screen behind
PI and FG versions: 18-ga Stainless, Powdercoat, with hydrophobic cloth behind
Environmental
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Suspension
(22) M10 Threaded Points (one EBK-M10-EVI kit of four forged eyebolts included)
Height
Width
Depth
30.26 in (768.6 mm)
16 in (406.3 mm)
16.27 in (413.3 mm)
Net Weight
65.5 lb (29.7 kg)
EVF - Front Load
EVF-1152D
Two-Way Full-Range Loudspeaker System
• ND2B 2" (51 mm) diaphragm 1.4" (36 mm)exit pure titanium compression driver
• SMX2151 15" (381 mm) LF transducer
with fully symmetric drive
• Advanced fourth-order crossover
network with HF protection
• Coverage pattern: 40° x 30° Constant
Directivity™ 12" rotatable waveguide
EVF1152D/43
EVF1152D/64
EVF1152D/66
Frequency Response (-3 dB)
70 – 18000 Hz1,2
Frequency Response (-10 dB)
40 – 21000 Hz1,2
Recommended High-Pass Frequency
45 Hz
Sensitivity1 1 W/1 m
100 dB
Max. SPL/1 m (Calculated)1
134 dB
System Power Handling (Continuous3/Program/Peak)
600 W / 1200 W / 2400 W
Nominal Impedance (Passive)
8Ω
Minimum Impedance
6Ω
Input Connections
Phoenix/Euroblock style screw terminals
PI and FG versions include dual-gland-nut input-panel cover
• 101 dB sensitivity, 134 dB maximum SPL
• System rating: 500 W continuous, (2000 W peak)
• Active rating: LF 400 W / HF 40 W
continuous (1600 W / 160 W peak)
• (22) M10 threaded suspension points
• PI version available with gland nut
and stainless steel grille
EVF1152D/94
EVF1152D/96
Install
Speakers
Live for Sound
EVF1152D/99
Coverage (Nominal -6 dB) H°
40 °
60 °
60 °
90 °
90 °
90 °
Coverage (Nominal -6 dB) V°
30 °
40 °
60 °
40 °
60 °
90 °
LF Transducer
DVX3151A, 15-in (381 mm) Woofer
HF Transducer
DH7N, 3-in (76 mm) Diaphragm Compression Driver
Internal Passive Crossover Frequency
1300 Hz
Enclosure Material
13-ply Weather-Resistant Birch
Grille
Standard versions: 16-ga Galvanneal, Powdercoat, with screen behind
PI and FG versions: 18-ga Stainless, Powdercoat, with hydrophobic cloth behind
Environmental
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Suspension
(22) M10 Threaded Points (one EBK-M10-EVI kit of four forged eyebolts included)
Height
Width
Depth
30.26 in (768.6 mm)
18.5 in (496.8 mm)
18.37 in (466.6 mm)
Net Weight
75.7 lb (34.4 kg)
21
EVF - Front Load
Speakers
Live for Sound
EVF-1121S Front-Loaded Bass Element
EVF-1181S
• EVS18SB 18" (457
mm) LF Transducer
• 99 dB sensitivity, 131
dB maximum SPL
• System rating: 400 W
continuous, 1600 W peak
• (28) M10 threaded
suspension points
Install
• EVS12SB 12" (305 mm) LF transducer
• 103 dB sensitivity, 135 dB maximum SPL
• System rating: 400 W
continuous, 1600 W peak
• (22) M10 threaded suspension points
• Passive network included
EVF-1151S Front-Loaded Bass Element
EVF-2151D
Front-Loaded Subwoofer
• Dual DVX3159A (381mm)
LF Transducers
• 101 dB sensitivity, 137 dB
maximum SPL
• System rating: 1000 W
continuous, 4000 W peak
• (28) M10 threaded suspension points
• EVS15SB 15" (381 mm) LF transducer
• 103 dB sensitivity, 135 dB maximum SPL
• System rating: 400 W
continuous, (1600 W peak)
• (22) M10 threaded suspension points
EVF-1121S
EVF-1151S
EVF-2121S
EVF-1181S
EVF-2151D
Frequency Response (-3 dB)
70 – 98 Hz1,2
67 – 95 Hz1,2
54 – 145 Hz1,2
35 – 100 Hz1,2
40 – 2600 Hz1,2
Frequency Response (-10 dB)
48 – 120 Hz1,2
46 – 124 Hz1,2
41 – 330 Hz1,2
28 – 650 Hz1,2
30 – 3200 Hz1,2
Recommended High-Pass Frequency
50 Hz
35 Hz
45 Hz
33 Hz
35 Hz
Internal Passive Low-Pass Filter
100 Hz, 12 dB per octave
none
none
none
Sensitivity 1 W/1 m
103 dB
100 dB
99 dB
101 dB
Max. SPL/1 m (Calculated) Peak
135 dB
135 dB
131 dB
137 dB
System Power Handling (Continuous3/Program/Peak)
400 W / 800 W / 1600 W
800 W / 1600 W / 3200 W
400 W / 800 W / 1600 W
1000 W / 2000 W / 4000 W
Nominal Impedance
Passive: 4 Ω
Biamp: 8 Ω
Passive: N/A
Biamp: 4 Ω
Passive: N/A
Biamp: 8 Ω
Passive: N/A
Biamp: 4 Ω
Passive: N/A
Biamp: 2.8 Ω
Passive: N/A
Biamp: 6 Ω
Passive: N/A
Biamp: 2.7 Ω
Two EVS12SB, 12-in (305 mm)
Driver
EVS18SB, 18-in (457 mm) Driver
Two DVX3159A, 15-in (381
mm) Drivers
Passive: 3.4 Ω
22
Front-Loaded Subwoofer
Minimum Impedance
Biamp: 5.5 Ω
Biamp: 6.4 Ω
Input Connections
Phoenix/Euroblock style screw terminals
PI and FG versions include dual-gland-nut input-panel cover
Coverage (Nominal -6 dB) H°
Omnidirectional in normal operating range
Coverage (Nominal -6 dB) V°
Omnidirectional in normal operating range
Transducer
EVS12SB, 12-in (305 mm) Driver
Enclosure Material
13-ply Weather-Resistant Birch
Grille
Standard versions: 16-ga Galvanneal, Powdercoat, with screen behind
PI and FG versions: 18-ga Stainless, Powdercoat, with hydrophobic cloth behind
Environmental
Standard versions: IEC 60529 IP44
PI and FG versions: IEC 60529 IP55
Suspension
(22) M10 Threaded Points (one EBK-M10-EVI kit of four forged eyebolts included)
(28) M10 Threaded Points (one
EBK-M10-EVI kit of four forged
eyebolts included)
(28) M10 Threaded Points (one
EBK-M10-EVI kit of four forged
eyebolts included)
Height
Width
Depth
30.26 in (768.6 mm)
16.0 in (406 mm)
16.27 in (413.3 mm)
30.26 in (768.6 mm)
18.5 in (470 mm)
18.4 in (467 mm)
30.26 in (768.6 mm)
18.5 in (470 mm)
18.4 in (467 mm)
30.26 in (768.6 mm)
26.6 in (675.6 mm)
28.6 in (726.4 mm)
30.26 in (768.6 mm)
26.6 in (675.6 mm)
28.6 in (726.4 mm)
Net Weight
57.7 lb (26.2 kg)
62.6 lb (28.4 kg)
82.4 lb (37.4 kg)
101.2 lb (45.9 kg)
117 lb (53.1 kg)
EVS15SB, 15-in (381 mm)
Driver
FRi Series
The FRi+ Series brings premium Electro-Voice®
components, including the DH7 compression driver and
DL series woofers, to a new level of affordability. The
FRi+ Series provides exceptional value for permanent
FRi-2082/28LPM
installations that require flexibility and performance.
Numerous threaded mounting points help make
suspension easy, and allow for installation in any situation.
Install
Speakers
Live for Sound
FRi Series Speaker System
•
•
•
•
2-Way Full-range
Vented LF enclosure
1" voice coil
Low-profile slanted design
• 45° angle allows under-balcony, on-wall
and stage monitoring applications
• Only FRi-2082 comes with mounting bracket!
• 2 x 3/8"-16 suspension points
FRi-2082
Frequency Range (-10 dB)
55 Hz - 18 kHz
Recommended High-Pass Frequency
50 Hz (12 dB/Oct.)
Axial Sensitivity SPL 1W/1m
93 dB
(Biamp mode)
Max. SPL /1 m (calc.); full space
122 dB
Continuous Power Handling (Biamp op.)
200 W
Peak Power Handling (Peak)
800 W
Coverage (nominal -6 dB) (H° x V°)
100° x 100° (CD Horn)
LF woofer (transducer)
50mm x 203 mm (2” x 8”)
HF throat diameter (transducer)
25 mm (1”) (compr. driver)
Crossover Frequencies
2,800 Hz
Nominal Impedance (Biamp)
8Ω
Input Connections
Barrier strips
Dimensions (H x W at front x D)
222 x 620 x 356 mm
8.75” x 24.5” x 14”
Net Weight
18.2 kg (40 lbs.)
23
EVI Series
Install
Speakers
Live for Sound
EVI provides an economical solution for permanent
installations that require coverage over a rectangular area.
In a typical room, the distance from the loudspeaker to
the last row is two or more times the distance to the front
row, resulting in a substantial loss of level and intelligibility
EVI-12
EVI Series Speaker Systems
•
•
•
•
EVI-15
•
•
•
•
PRO™ Driver protection circuit
Time Path™ phasing plug
Multi-angled housing
Five 3/8"-16 hanging points
Two-way, full-range loudspeaker
High sensitivity
Vented LF enclosure
1.25" voice coil (titanium diaphragm) HF
•
•
•
•
PRO™ Driver protection circuit
Time Path™ phasing plug
Multi-angled housing
Five 3/8"-16 hanging points
EVI Series Speaker Systems
•
•
•
•
•
•
24
Two-way, full-range loudspeaker
High sensitivity
Vented LF enclosure
1.25" voice coil (titanium diaphragm) HF
EVI Series Speaker Systems
•
•
•
•
EVI-28
towards the back. The Variable Intensity horn delivers six
to eight dB more SPL to the back of the room, overcoming
level loss without resorting to the expense and complexity
of additional systems or components.
Two-way, full-range loudspeaker
Vented LF enclosure
1.25" voice coil (titanium diaphragm) HF
PRO™ Driver protection circuit
Time Path™ phasing plug
Multi-angled housing
• Stacked, frequency-shaded woofers maintain
vertical coverage angle down to 500 Hz with
120° (typical 180°); ideal for reverberant rooms
• Three 3/8"- hanging points
EVI Vari Intense® coverage pattern (3-2-1 Rule):
Install
If speaker height = H, then coverage length = 3H, coverage width = 2H, and first row coverage = 1H
Speakers
EVI Series
Live for Sound
H
W
idt
h
H
=
2H
EVI-12
th =
Leng
EVI-15
3H
EVI-28
Frequency range (-3 dB)
50 Hz–20 kHz
50 Hz–20 kHz
60 Hz–20 kHz
Sensitivity (SPL 1 W/1 m)
99.5 dB
100 dB
93 dB
Max. SPL/1m (calc.)
129 dB
129.5 dB
123.5 dB
Long-term power handling
250 W
250 W
250 W
Short-term power handling
1,000 W
1,000 W
1,000 W
Coverage (H° x V°)
LT-60° x 70°, ST= 110° x 90°
60° x 65°
65° x 65°
LF driver
12”
15”
2 x 8”
HF driver (exit)
1” (DH2010A)
1” (DH2010A)
1” (DH2010A)
Crossover frequency
2,000 Hz
2,000 Hz
2,000 Hz
Nominal impedance (minimum)
8Ω
8Ω
8Ω
Input connections
screw terminal
screw terminal
screw terminal
Dimensions (H x W at front x D)
554 x 356 x 699 mm
21.8” x 14” x 27.5”
584 x 429 x 766 mm
23” x 16.9” x 30.2”
353 x 496 x 523 mm
13.9” x 19.5” x 20.6”
Net weight
21.8 kg (48 lbs)
24.0 kg (53 lbs)
16.3 kg (36 lbs)
25
EVID Series
Install
Speakers
Live for Sound
EVID speakers beautify not only the sound of a room,
but also the looks. Designed to have best in class sonic
characteristics and stunning high fidelity, EVID is typically
Mobile Audio
EVID 3.2
at home in retail environments, boardrooms, restaurants,
and bars.
EVID Series Premium Surface-Mount Speaker System
• Two-way full range
• Vented LF enclosure
• 0.75" voice coil (titanium diaphragm) with
Neodymium magnetic structure
• Full-bandwidth overload protection for HF and LF
EVID 4.2
Two-way, high-output full range
Vented LF enclosure
High sensitivity
1" voice coil (titanium diaphragm) with
Neodymium magnetic structure
• HF section features Coherent Coverage
Waveguide™ to minimize interference
Full bandwidth overload protection for HF and LF
Three-dimensional ellipse (for compact look)
Magnetically shielded for video applications
Comes with Strong Arm Mount (SAM™) and a hex-key
Suspension insert for SAM™, safety point on rear side
•
•
•
•
•
Full bandwidth overload protection for HF and LF
Three-dimensional ellipse (for compact look)
Magnetically shielded for video applications
Comes with Strong Arm Mount (SAM™) and a hex key
Suspension insert for SAM™; safety point on rear side
EVID Series Premium Surface-Mount Subwoofer
•
•
•
•
•
•
26
•
•
•
•
•
EVID Twin 6" Surface-Mount Speaker System
•
•
•
•
EVID 12.1
Three-dimensional ellipse (for compact look)
Magnetically shielded for video applications
Comes with Strong Arm Mount (SAM™) and a hex key
Suspension insert for SAM™; safety point on rear side
EVID Series Premium Surface-Mount Speaker System
• Two-way full range
• Vented LF enclosure
• 1" voice coil (titanium diaphragm) with
Neodymium magnetic structure
• HF section features Coherent Coverage
Waveguide™ to minimize interference
EVID 6.2
•
•
•
•
Subwoofer
Slot-loaded port design
Dual-voice-coil, high-excursion transducer
High sensitivity
Built-in stereo crossover with high-pass output
Trapezoidal
• Comes with mounting bracket (passed EIA 636 at a
safety factor of 8:1) for on-wall or corner mounting
• One safety 3/8"-16 eyebolt included
• Suspension inserts and 2 x 3/8" hanging inserts
• Powered version (120v only) available
• 4” woofer, 4” passive radiator, and a 1”
tweeter provide high quality sound
• Fully sealed enclosures provides superior
sound isolation from adjacent rooms.
• Tuned passive radiator design ensures consistently
superior performance in any installation.
• Either 70v/100v or 8 ohm operation is
standard on both models. No need to
buy or stock special versions.
EVID FM 6.2 EVID Series InWall Speaker System
• Shallow profile allows installation virtually anywhere.
• Secure phoenix style pass through connectors
for easy wiring and installation.
• Four point “quick mounting” tabs provide
fast easy installation in anywall cavity.
• The transformer is mounted on the rear can
surface to further enhance stiffness.
• Specially designed ribbed back can
is designed to eliminate flexing.
• 6” woofer coupled with a 6” passive
radiator for extended bass response
• Fully sealed enclosures provides superior
sound isolation from adjacent rooms.
• Tuned passive radiator design ensures consistently
superior performance in any installation.
• Either 70v/100v or 8 ohm operation is
standard on both models. No need to
buy or stock special versions.
• Shallow profile allows installation virtually anywhere.
• Secure phoenix style pass through connectors
for easy wiring and installation.
• Four point “quick mounting” tabs provide
fast easy installation in anywall cavity.
• The transformer is mounted on the rear can
surface to further enhance stiffness.
• Specially designed ribbed back can
is designed to eliminate flexing.
EVID 3.2/T
EVID 12.1
EVID 4.2/T
EVID 6.2/T
EVID FM 4.2
Install
EVID FM 4.2 EVID Series InWall Speaker System
Speakers
EVID Series
Live for Sound
EVID FM 6.2
Frequency response (-10 dB)
85 Hz–20 kHz
65 Hz–20 kHz
62 Hz–20 kHz
40 Hz–140 Hz
52 - 20000 Hz
52 - 20000 Hz
Sensitivity (SPL 1 W/1 m)
87 dB
89 dB
94 dB
100 dB
87 dB
90 dB
Max. SPL/1m (calc.)
112 dB
115 dB
122 dB
128 dB
110 dB
115 dB
Long-term power handling
75 W
100 W
150 W
175/175 W
50 W
75 W
Short-term power handling
300 W
400 W
600 W
700/700 W
200 W
300 W
Transformer taps
70V: 5 W
70V: 3.75 W
70V: 7.5 W
—
1.75, 3.75, 7.5, 15, 30
at 70 v
7.5, 15, 30, 60 w at 70 v
(transformer version only)
100V: 10 W
70V/100V: 7.5 W, 15 W,
30 W
70V/100V:15 W, 30 W,
60 W
—
Coverage (H° x V°)
140° x 100°
120° x 80°
100° x 80°
—
150° x 150°
120° x 120°
LF driver
2” x 3.5”
2” x 4”
2” x 6”
12”
4 inch with 4 inch passive
radiator
6 inch with 6 inch passive
radiator
HF driver
0.75”
1”
1”
—
1 inch Titanium dome
tweeter
1 inch Titanium dome
tweeter
Nominal impedance (non-transformer
version)
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
Minimum impedance (non-transformer
version)
6Ω
6Ω
6Ω
6Ω
—
—
Input connections
spring terminal
spring terminal
spring terminal
spring terminal
4 pin Phoenix
4 pin Phoenix
Dimensions (H x W at front x D)
234 x 127 x 165 mm
9.2” x 5.1” x 6.5”
310 x 175 x 216 mm
12.2” x 6.9” x 8.5”
419 x 228 x 298 mm
16.5” x 9” x 11.75”
412 x 584 (at front) x
305 mm
16.25” x 23” x 12”
13.78 in (350 mm)
7.41 in (188.3 mm)
3.76 in (95.6 mm)
18.31 in (465 mm)
10.08 in (256 mm)
3.95 in (100.3 mm)
Net weight (incl. mounting bracket)
1.5 kg (3.3 lbs)
3.9 kg (8.5 lbs)
5.3 kg (12 lbs)
18.1 kg (40 lbs)
6.39 lbs (2.9 kg)
12.79 lbs (5.8 kg)
27
EVID - ceiling speakers
Install
Speakers
Live for Sound
No matter what an installation calls for, EVID ceiling
speakers can fill the need. Each model is unique
and designed to meet the toughest “problem” job
specifications. Sonically superior and aesthetically
pleasing, the EVID ceiling speakers have no match.
From the compact, powerful C4.2 to the exclusive
EVID C4.2
waveguide-coupled design of the C8.2HC for highceiling environments; the EVID ceiling line will solve any
installation requirement. The EVID ceiling speaker line was
designed with the contractor and listener in mind. Great
sound, simple installation, and exceptional value are part of
every model.
EVID Series 4" Two-Way Ceiling System
•
•
•
•
•
For use in air-handling spaces
4" woofer
Wave-guide coupled titanium-coated dome tweeter
Three-point mounting system for easy installation
Mounting support ring and tile rails included
EVID C8.2/C8.2LP
EVID Series 8" Two-Way Ceiling System
• For use where a flush-mount design is desired
but demand for high-quality audio exists
• Specially tuned enclosure
• 8" woofer
• 1waveguide-coupled tweeter for
coverage up to 18 kHz
• Four-point mounting system
EVID C8.2HC
• Mounting support ring and tile rails included
• No additional accessories needed
for most installations
• Also available in black
• Low profile back can (3shorter in depth)
for tight fitting ceiling spaces (C8.2LP)
EVID 8" Two-Way Pattern Control Ceiling System
•
•
•
•
28
• No additional accessories needed
for most installations
• Also available in black
For use in high-ceiling, reverberant "problem" rooms
Exclusive ported, wave-guide coupled 8" driver
Four-point mounting system
Mounting support ring and tile rails included
• No additional accessories needed
for most installations
• Patent-pending design
Speakers
EVID - ceiling speakers
Live for Sound
EVID C10.1 EVID Series Compact and Powerful Ceiling Subwoofer
10" subwoofer in tuned high performance enclosure
Low-frequency performance down to 45 Hz
Flexible installation
Four-point mounting system
• Mounting support ring and tile installations included
• No additional accessories needed
for most installations
EVID C12.2 High-Performance Ceiling Speaker System
• For use in large venues including
high-ceiling applications
• Features EVID 920-8B transducer
• 12" coaxial with high power handling
and 100 dB sensitivity
• Integrated 64 W transformer allows for
use in 70 V/100 V applications
• Automatic saturation compensation for distortionfree performance at high sound levels
• Transformer tap selection via a convenient
switch on the front of baffle
• Rear enclosure is constructed from heavy-gauge steel
EVID C4.2
LF Transducer
HF Transducer
EVID C8.2LP
EVID C8.2
• Durable black powder-coat
• Tile bridge included for safe suspension
in a drop ceiling that uses mineral wool
or other fiber-based ceiling tiles
• Can also be suspended by an integrated 3/8"
rigging point for use with threaded rod
• Can be mounted using the three pendant
mount tabs on the rear enclosure
• Rear cover includes provisions for a junction box
fitting providing access to a four-pin, phoenixtype connector that allows direct connection
to the speaker with 12-gauge wire
EVID C8.2HC
EVID C10.1
EVID C.12.2
4”
8”
8”
10”
12”
Polypropylene cone
Polypropylene cone
Polypropylene cone
+Waveguide
Polypropylene cone
Polypropylene cone
19 mm (0.75”)
25 mm (1”)
25 mm (1”)
Ti Mylar Laminate Dome
Ti Mylar Laminate Dome
Ti Mylar Laminate Dome
25 mm (1”)
Frequency Response (-10 dB)
65 Hz - 20 kHz
50 Hz - 20 kHz
50 Hz - 20 kHz
45 - 180 Hz
65 Hz - 20 kHz
Power Handling(8 Ω)
80 W (overload protected)
100 W (overload protected)
100 W (overload protected)
150 W
100W
Coverage Pattern
130° conical
110° conical
75° conical (@ >1 kHz)
180°
90° average
Sensitivity (1W/1m)
86 dB
91 dB
93 dB
94 dB
100 dB
Input Configuration
8 Ω, 70 V, 100 V
8 Ω, 70 V, 100 V
8 Ω, 70 V, 100 V
8 Ω, 70 V, 100 V
8 Ω / 70V / 100V
Transformer Power Taps (W)
(1.88*), 3.75, 7.5, 15, 30
(1.88*), 3.75, 7.5, 15, 30
(7.5*), 15, 30, 60
(7.5*), 15, 30, 60
(4*), 8, 16, 32, 64 ASC protected
333 x 414 mm
Dimensions (H x Dia.)
176 x 181mm
178 x 270 mm/255 x 270 mm
303 x 320 mm
303 x 320 mm
6.93” x 7.13”
7.01” x 10.65”/10.04” x 10.63”
11.99” x 12.60”
11.99” x 12.60”
5.0 kg (11.0 lbs.)
6.0 kg (13.2 lbs.)
Weight
2.7 kg (6.0 lbs.)
Acoustic Design
Ported cabinet, internally damped
Two-Way, inc. passive crossover
Cabinet Construction
Steel enclosure and UL94V-0 rated baffle and bezel
Mounting System
Integrated 3-point toggle anchors
Grille Construction
Powder-coated steel
Available Colors
White (paintable surface)
Install
•
•
•
•
7.0 kg (15.4 lbs.)
12.3 kg
Dual ported cabinet,
internally damped
Ported cabinet, internally damped
Two-Way inc. passive crossover
*70 V only*
29
S Series Mini Monitor
Install
Speakers
Live for Sound
A 5.25-inch, 120W, two-way monitor loudspeaker
system. Ideal for distributed sound applications
that require high-quality sound reproduction. The
lowfrequency section is a 5.25-inch direct-radiating
woofer with a polypropylene cone installed in an
S-40
S Series Speaker Systems
•
•
•
•
Two-way, full-range ultracompact
Ultra-linear frequency response
Vented LF enclosure
Full bandwidth protection circuit
for woofer and tweeter
S-40
30
optimally vented, high-impact polystyrene enclosure. The
high-fequency section is a one-inch, direct-radiating,
soft-dome tweeter. The system’s circuits automatically
reduce power delivery to drivers if threshold is exceeded,
reducing the possibility of driver failure.
Frequency range
85 Hz–20 kHz (+/- 3dB)
Sensitivity (SPL 1W/1m)
85 dB
Max. SPL/1m (calc.)
113 dB
Long-term power handling
120 W
Short-term power handling
640 W
Coverage (H° x V°)
100° x 100°
Directivity Index
9.8 dB (+3.8/-3.6 dB)
2 kHz–20 kHz
LF driver
5.25”
HF driver
1” Softdome
Crossover frequencies
3,500 Hz
Nominal impedance (low Z version)
4Ω
Minimum impedance (low Z version)
3.7 Ω
Input connections
spring terminal
Dimensions (H x W at front x D)
249 x 178 x 150 mm
(9.8” x 7” x 5.9”)
Net weight (including mounting bracket)
2.6 kg (5.7 lbs.)
• Ferrofluid-cooled soft-dome tweeter
• Trapezoidal
• 2 x 1/4" –20 suspension points
ZX/ZXA Series
ZX1
Composite 8" two-way
•
•
•
•
•
•
•
ZX1i
EV8L high performnace 8"woofer
Exclusive port design for extended LF response
200W cont., 400W program power handling,
Integrated overload protection
DH2005 true compression driver 1.25" voice coil)
Rotatable 90 x 50 HF horn
Integrated monitor angle
•
•
•
•
Integrated pole-mount adapter and handle
4 metric inserts for additional mounting options
2 Neutik NL4 connectors
Available in black and white
Composite indoor/outdoor 8" two-way
•
•
•
•
•
ZXA1-90
New, high-power woofers and drivers, contemporary
styling, and innovative mechanical solutions for all
permanent installation and mobile stage applications make
ZX the new standard in lightweight sound.
Mobile Audio
The Advanced Generation of Versatile, High-Performance,
Lightweight Speakers. Building upon decades of
experience manufacturing lightweight, molded enclosures
with high-end components, ZX loudspeakers comprise a
new family that takes audio technology to the next level.
Install
Speakers
Live for Sound
8" weatherized cone high output LF transducer
1" true compression driver
100 x 100 and 90 x 50 coverage pattern
Weatherized for indoor and outdoor use
"Clickn' Mount"Quick SAM mounting system for
• wide range of motion included
• 4-pin detachable Phoenix-style connector
• Dedicated transformer models with
wide range of selectable tabs
Compact Powered Loudspeaker
•
•
•
•
•
•
•
Integrated 800 watt power amplifier
Biamplified design with transducer protection
EV8L 8"high-output LF transducer
DH2"05 1exit true compression driver
90° x 50° coverage pattern
Rotatable horn design
123 dB maximum SPL
•
•
•
•
•
Selectable high-pass filter for use with subwoofers
Line and microphone inputs
Integral monitor angle on enclosure
Built-in pole mount
Lightweight (< 20 lbs) with integral
handle for easy carrying
31
Zx/ZxA Series
ZX3
Composite 12" two-way
ZX4
Composite 15" two-way
• ND2 2" voice coil, 1" exit
neodymium compression driver
• 600 W cont. 2400 peak
• 90° x 50° and 60° x 60° horn patterns
• Seven M8 rigging points,
two single stud fittings
• NL4 or two conductor SJO cable and
gland nut (weatherized versions)
• Available in two finishes:
indoor or weatherized
• Black or white
Mobile Audio
Install
Speakers
Live for Sound
ZX5
•
•
•
•
•
•
15" 2-Way with EVS15SF LF transducer
DH3 1.25" titanium HF driver
400 Watt cont. 1600W Peak
High sensitivity (100dB)
Adjustable monitor angles 45° and 55°
Large Format 90° x 50° EV horn
Composite 15" two-way
• DVX-3150 : New high-power 15" LF transducer
• ND2 : New 2" voicecoil Neodymium
compression driver
• New asymmetrically molded polypropylene enclosure
• Internal passive crossover (switchable to biamp)
• 10 x metric inserts (M8)
•
•
•
•
3 Ancra single-stud fittings (5 attachment points)
Integrated pole-mount adapter
Powder-coated full-face steel grille backed with foam
Standard floor monitor angle 45°, adjustable
to 55° with integrated monitor feet
ZXA5
•
•
•
•
•
•
•
32
Integrated Amplifier with 1000W LF, 250W HF
Selectable 100 Hz High Pass
XLR and 1/4" TRS Input Connector
XLR Output Connector
PowerCon Connector with Slave Through
DVX3150 15" LF Transducer with Forced Air Cooling
ND2 2" Voice Coil, 1" Exit Neodymium
•
•
•
•
•
•
Compression Driver
Two Models: 60° x 60° or 90° x 50°
Coverage Patterns
High Sensitivity, 133 dB Maximum SPL
Adjustable Monitor Angle (45° or 55°)
3 Anchor Plates for Single Stud Fittings and
10 Integral Suspension Points
Zx/ZxA Series
ZX1i
ZX3
ZX4
ZX5
ZXA1-90
ZXA5
60 - 20000 Hz
60 - 20000 Hz
58 - 15000 Hz
60 - 20000 Hz
58 - 18000 Hz
60 Hz - 20 kHz Hz Full
Range Mode
58 - 18000 Hz
Recommended High-Pass
Frequency
40 Hz
40 Hz
50 Hz
42 Hz
36 Hz
36 Hz
100 Hz User Selectable
Sensitivity 1 W/1 m
94 dB
94 dB
97 dB
100 dB
98 dB
Max. SPL/1m (calc)
123 dB
123 dB
131 dB
132 dB
132 dB
123 dB
133 dB
System Power Handling (Continuous/Program/Peak)
200 Watts
200 Watts
600 Watts
400 Watts
600 Watts
Nominal Impedance (Passive)
8Ω
8Ω
8Ω
8Ω
8Ω
–
–
Speaker Type
Fullrange, Mid-High,
Two-Way, Wedges
Fullrange, Mid-High,
Two-Way
Fullrange
Fullrange, Mid-High,
Two-Way, Wedges
Fullrange, Mid-High,
Two-Way, Wedges
Fullrange, Powered Monitors, Powered Speakers,
Two-Way, Wedges
Input Connections
Parallel Neutrik® NL4
Speakon
4-pin Phoenix
2 conductor SJO cable
and gland nut
Frequency Response (-10 dB)
48 - 20000 Hz
48 - 20000 Hz
48 - 20000 Hz
42 - 20000 Hz
Coverage(Nominal -6 dB) H°
90 °
90 °
90 °
Coverage(Nominal -6 dB) V°
50 °
50 °
50 °
LF Transducer
EV8L
EV8L
HF Transducer
DH2005
Crossover Frequency
Minimum Impedance
Enclosure Material
High Impact Polystyrene
Grill
Polyester Powder Coated, 18GA Galvanized Steel
Internal Crossover
Yes
Yes
Chassis Size
8 in (203.2 mm)
8 in (203.2 mm)
12 in (304.8 mm)
Flying
No
Yes
Outdoor
No
Color
XLR and TRS Combo;
XLR with Independent
Gain
XLR
39 - 20000 Hz
48 Hz - 20 kHz Hz Full
Range Mode
50 - 20000 Hz
60 °
90 °
90°, 100°
90°
60 °
50 °
50°, 100°
50°
DVX3121
EVS15SF
DVX3150
EV8L, 203mm (8 in)
Driver
DVX3150
DH2005
ND2
DH3
ND2
DH2005, 25mm (1 in)
Exit Compression Driver
ND2
1.7 kHz
1.7 kHz
2 kHz
1500 Hz
1500 Hz
1800 Hz
1500 Hz
6Ω
6Ω
6.2 Ω
6.5 Ω
6.5 Ω
Yes
No, Yes
15 in (381 mm)
15 in (381 mm)
8 in (203.2 mm)
15 in (381 mm)
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
No
No
Black
Black, White
Black, White
Black
Black, White
Black
Black, White
Rotatable Horn
Yes
Yes
no
Power Handling
(Continuous/Program/Peak)
200 W/400 W/800 W
200 W/400 W/800 W
600 W / 2400 W
400 W / 1600 W
600 W / 2400 W
Amplifier Power (RMS)
800 W
1250 W
Power Requirement
120V: 95V - 132V, 50 - 60 Hz, 0.6A; 230V:190V 264V, 50 - 60 Hz, 0.4A
Height
Width
Depth
17.76 in (451 mm)
11.1 in (282 mm)
10.35 in (263 mm)
17.76 in (451 mm)
11.1 in (282 mm)
10.35 in (263 mm)
Weight Net
18.52 lbs (8.4 kg)
18.52 lbs (8.4 kg)
43.65 lbs (19.8 kg)
27.01 in (686 mm)
17.52 in (445 mm)
15.98 in (406 mm)
27.24 in (692 mm)
17.56 in (446 mm)
16.18 in (411 mm)
17.99 in (457 mm)
11.1 in (282 mm)
10.39 in (264 mm)
27.24 in (692 mm)
17.56 in (446 mm)
16.18 in (411 mm)
44.53 lbs (20.2 kg)
22.11.02 lbs (5 kg)
19 lbs (8.62 kg)
50.49 lbs (22.9 kg)
Mobile Audio
ZX1
Frequency Response (-3 dB)
Install
Speakers
Live for Sound
33
Sx/SxA Series
Speakers
Live for Sound
offers the convenience of powered loudspeakers with the
performance and reliability for which EV is known.
Sx80BE
Sx80TB
Install
As a manufacturer of tour proven loudspeakers and
amplifiers, it only makes sense to pair the two together
within the most popular loudspeaker design in history. SXA
Mobile Audio
•
•
•
•
•
•
•
•
34
2-Way Full-range
Vented LF enclosure
1" voicecoil (titanium diaphragm)
PRO™ Driver protection
HF-horn features Varipath™
Trapezoidal
Compact dimensions
7 x M6 and 4 x M5 inserts
•
•
•
•
•
•
•
•
Sx 80
Sx 100 +
Sx 250
Frequency Range (-10 dB)
51 Hz - 20 kHz
60 Hz - 25 kHz
50 Hz - 20 kHz
Frequency Response (-10dB)
Recommended High-Pass
Frequency
---
---
45 Hz (12 dB/Oct.)
Rated Output Power
Axial Sensitivity SPL
1W/1m (Biamp mode)
92 dB
98 dB
99 dB
Max. SPL / 1m (calc.);
full space
121 dB
(100V: 110 dB)
127 dB
200 W
130 dB
SxA100+
SxA250
55Hz to 20kHz
55Hz to 20kHz
long term
LF150/HF 50Watts
LF150/HF 50Watts
10ms burst
LF350W/HF 80W
LF350W/HF 80W
Max. Sound Pressure Level
124 dB
126 dB
HF Coverage (nominal)
65° x 65°
80° x 55°
Components
LF
12“ woofer
DL15BFH
HF
DH 2010A
DH 2010A
Inputs
Microphone Input (XLR)
Line Level Input (XLR/1/4“)
XLR out (slave)
Microphone Input (XLR)
Line Level Input (XLR/1/4“)
XLR out (slave)
Level Controls
Mic Level (-35 dBu to 0 dBu
Master Level (- infinity to
0 dB)
Mic Level (-35dBu to 0dBu
Master Level (- infinity
to 0dB)
2-Band EQ
LF: +/- 6dB
HF: +/- 4dB
LF: +/- 6dB
HF: +/- 4dB
Long-Term Power Handling
(low Z)
175 W
(100V resp. Biamp)
(60 W/100V)
Short-Term Power Handling
(Peak), low Z
700 W
Coverage (nominal -6 dB)
H° x V°
90° x 60°
(CD Horn)
65° x 65°
(CD Horn)
80° x 55°
Directivity Index
(800 - 16.000 Hz)
9.2 dB
(+2.3/-3.9 dB)
11.1 dB
(+2.4/-4.1 dB)
11.6 dB
(+3.0/-6.9 dB)
LF woofer (transducer)
8” (---)
12” (---)
15”(DL15BFH)
HF throat diameter
(transducer)
1” (DH2005)
1” (DH3)
1”(DH2010A)
Power Requirement
120V or 220-240V 50/60Hz
120V or 220-240V 50/60Hz
Crossover Frequencies
2,200 Hz
1,500 Hz
1,600 Hz
Dimensions
586 x 429 x 312 mm
625 x 437 x 333 mm
Nominal Impedance (nontransformer)
8Ω
8Ω
8Ω
(heights x width x depth)
23.07” x 16.89” x 12.28”
24.60” x 17.20” x 13.11”
Weight (net)
19.5 kg (43 lbs.)
22.2 kg (48.94 lbs.)
800 W
350 W
2-Way Full-range
Vented LF enclosure
1" voicecoil (titanium diaphragm)
PRO™ Driver protection
HF-horn features Varipath™
Trapezoidal
Compact dimensions
7 x M6 and 4 x M5 inserts
1,400 W
Minimum Impedance (nontransformer)
7.2 Ω
5.6 Ω
5.2 Ω
Input Connections
see above
see above
2 four-pin Speakon
Dimensions (H x W at
front x D)
400 x 292 x 222 mm
15.75” x 11.5” x 8.75”
586 x 429 x 312 mm
23.07” x 16.89” x 12.28”
625 x 431 x 330 mm
24.6” x 16.97” x 12.99”
Net Weight
8.2 kg (T/PIX: 9.3 kg)
18.1 lbs. (T/PIX: 20.5 lbs.)
14.5 kg
32 lbs
18.1 kg
39.9 lbs.
Sx80PIX
Sx80PI
•
•
•
•
•
•
•
•
2-Way Full-range
Vented LF enclosure
1.25" voice coil (titanium diaphragm)
PRO™ Driver protection circuit
HF-horn features Varipath™
• 65° x 65° CD horn from the famous Sx 300
for an outstanding acoustic performance
• Fully compatible with Sx mounting
hardware and accessories
• Pole-mount adapter
15" two-way
•
•
•
•
•
SxA250
Trapezoidal (25° per side)
Physical characteristics of
Sx 300 with slightly lower sensitivity
4 x M8x1.25 attachment inserts
Powered composite 12" two-way
• Very compact, lightweight, robust
polypropylene enclosure
• Real fullrange 55 Hz – 20k Hz for front-of house
or monitor (with F200 monitor adapter)
• Biamped with 350 W plus 80 W peak power
for a very dynamic musical response
• Mixable microphone and line inputs with a 2-band EQ
Sx250
•
•
•
•
Install
Composite 12" two-way
•
•
•
•
•
SxA100+
2-Way Full-range
Vented LF enclosure
1" voicecoil (titanium diaphragm)
PRO™ Driver protection
HF-horn features Varipath™
Trapezoidal
Compact dimensions
7 x M6 and 4 x M5 inserts
Mobile Audio
Sx100+
•
•
•
•
•
•
•
•
2-Way Full-range
Vented LF enclosure
1" voicecoil (titanium diaphragm)
PRO™ Driver protection
HF-horn features Varipath™
Trapezoidal
Compact dimensions
7 x M6 and 4 x M5 inserts
Speakers
Sx/SxA Series
Live for Sound
2-Way Full-range
Extended bass response
15" DL-Woofer 1.25" titanium diaphragm
80 x 55 degree horn pattern
18mm plywood enclosure
•
•
•
•
Rugged FUTURATM finish
Five sided, multi-angle cabinet
Built-in stand mount
Suspendable using optional SK-1 kit
•
•
•
•
Mixable microphone and line inputs and a 2-band EQ
EV DL15 woofer with cast aluminium frame
DH2010A 1.25" driver with 80° x 55° CD horn
Pole-mount adapter
Powered 15" two-way
• 7-ply plywood enclosure with EV Coat
cover; extremely scratch resistant
• 5-side enclosure with 45° monitor angle
• True fullrange (55Hz – 20kHz) for frontof-house or monitor applications
• Biamped at 350W plus 80W peak power
for a very dynamic musical response
35
Sx/SxA Series
Mobile Audio
Install
Speakers
Live for Sound
Sx300E
Composite 12" two-way
•
•
•
•
•
•
•
Sx300PI
Trapezoidal (25° per side)
4 x M8x1.25 attachment inserts
Overview of variants see right spread sheet
Sx300 PI outdoor version
Sx300 PIX for 70V/100V
2-Way Full-range
High Sensitivity
Ultra-linear frequency response
Vented LF enclosure
1.25" voice coil (titanium diaphragm)
PRO™ Driver protection circuit
HF-horn features Varipath™
•
•
•
•
•
Trapezoidal (25° per side)
4 x M8x1.25 attachment inserts
Overview of variants see right spread sheet
Sx300 PI outdoor version
Sx300 PIX for 70V/100V
Composite weatherized 70/100v 12" two-way
•
•
•
•
•
•
•
36
•
•
•
•
•
Composite weatherized 12" two-way
•
•
•
•
•
•
•
Sx300PIX
2-Way Full-range
High Sensitivity
Ultra-linear frequency response
Vented LF enclosure
1.25" voice coil (titanium diaphragm)
PRO™ Driver protection circuit
HF-horn features Varipath™
2-Way Full-range
High Sensitivity
Ultra-linear frequency response
Vented LF enclosure
1.25" voice coil (titanium diaphragm)
PRO™ Driver protection circuit
HF-horn features Varipath™
•
•
•
•
•
Trapezoidal (25° per side)
4 x M8x1.25 attachment inserts
Overview of variants see right spread sheet
Sx300 PI outdoor version
Sx300 PIX for 70V/100V
High output composite dual 12" two-way
Sb122
Two-element vertical line array
For highest output outdoors
Very high sensitivity (105 dB/1W/1m)
High intelligibility
Two 12" woofers
DH2T driver on 65° x 65°Varipath horn
All-weather cabinet
•
•
•
•
SuperSAM mounting, 60° x 180° adjustable
Waterproof connection
by SJO cable with gland nut
Internal 600 W transformer available (SX600PIX)
Install
•
•
•
•
•
•
•
Composite 12" subwoofer
•
•
•
•
•
•
•
Subwoofer
Direct radiating vented design
Trapezoidal (25° per side)
Lo-Pass Filter
4 x M8x1.25 attachment points
Sb122PI outdoor version
Sb122PIX fro 70V/100V
Mobile Audio
Sx600PI
Speakers
Sx/SxA Series
Live for Sound
Sx 300
Sx600PI
Sb 122
Frequency Range (-10 dB)
50 Hz - 20 kHz
70 Hz - 16 kHz
43 - 200 Hz
Recommended High-Pass Frequency
---
90 Hz
40 Hz (12 dB/Oct.)
Axial Sensitivity SPL 1W/1m (Biamp mode)
99 dB
105 dB
99 dB*
Max. SPL / 1m (calc.); full space
131 dB (100V: 123 dB)
139 dB
131 dB*
Long-Term Power Handling (low Z)
300 W
600 W
400 W
(100V resp. Biamp)
(200 W/100V)
Short-Term Power Handling (Peak), low Z
1,200 W
2,400 W
1,600 W
Coverage (nominal -6 dB) H° x V°
65° x 65° (CD Horn)
65° x 65°
essentially omni
Directivity Index (800 - 16.000 Hz)
11.1 dB (+2.4/-4.1 dB)
11.3 dB
---
LF woofer (transducer)
12” (DL12BFH)
2 x 12” (ND12,DL12BFH)
12” (EVS12)
HF throat diameter (transducer)
1” (DH2010A)
1”(DH2T)
Crossover Frequencies
1,500 Hz
1,800 Hz
160 Hz
Nominal Impedance (non-transformer)
8Ω
4Ω
8Ω
Minimum Impedance (non-transformer)
5.0 Ω
3.5 Ω
6.0 Ω
Input Connections
2 four-pin Speakon
SJO cable/gland nut
2 four-pin Speakon
Dimensions (H x W at front x D)
586 x 429 x 312 mm 23.07” x 16.89” x 12.28”
1163 x 429 x 312 mm 45.79” x 16.89” x 12.28”
586 x 429 x 312 mm 23.07” x 16.89” x 12.28”
Net Weight
14.5 kg (PIX: 17.7 kg) 30 lbs. (PIX: 49.0 lbs.)
36.3 kg 80 lbs.
14.6 kg 33 lbs.
37
Phoenix
Mobile Audio
Install
Speakers
Live for Sound
Phoenix represents the rebirth of Manifold Technology.
Designed for tremendous SPL and sonic headroom, as
well as ease of transport and set-up, Phoenix fills the
needs of the live sound PA professional who finds that
X-Array is just too much and QRx is not enough. The
high-output performance of Phoenix has been optimized
PX2122
to reproduce rock, pop, and dance music. Using dual,
ND2, neodymium compression drivers on a manifold horn
and state-of-the-art DVX woofers, Phoenix loudspeakers
can perform louder and longer with less stress on system
components.
High output dual 12" two-way
• Dual ND2 2" Voice Coil, 1" Exit
Neodymium Compression Drivers
• Dual DVX3121 12LF Transducers
with Forced Air Cooling
• Long-Throw 45° x 30° Rotatable Coverage Pattern
• 1000W Continuous (4000W
Peak) Power Handling
PX2152
High output dual 15" two-way
• Dual ND2 2" Voice Coil, 1" Exit
Neodymium Compression Drivers
• Dual DVX3150 15LF Transducers
with Forced Air Cooling
• High Sensitivity, 136 dB maximum SPL
• 60° x 45° Rotatable Coverage Pattern
PX2181
• 1200W Continuous (4800W
Peak) Power Handling
• Passive/Biamp Selectable
• Integral Points for eyebolts or optional Rigging Kit
• Arrayable
High output dual 18" subwoofer
• Dual Horn-Loaded DVX3180 18" LF
Transducers with Forced Air Cooling
• 1000W Continuous (4000W
Peak) Power Handling
• High-Efficiency Sub-ScoopTM Design
• Dual/Parallel Mode Selectable
• Very High Sensitivity, 141 dB max. SPL
38
• Biamp Operation
• Very High Sensitivity, 138 dB max. SPL
• Integral Rigging Points for Eyebolts
or Optional Rigging Kit
• Designed for horizontal arrays
of two or three cabinets
• Integral Mounting Points on Rear Panel
for Optional Wheel/Caster Kit
• Enclosure is Stackable in Both
Horizontal and Vertical Orientations
• Dual ND2 2" Voice Coil, 1" Exit
Neodymium Compression Drivers
• VX3121 12LF Transducer with Forced Air Cooling
• Very High Sensitivity, 132 dB(PX1122M)
/ 134 dB(PX1152M) max. SPL
• Ultra-Compact, Low Profile, Multipurpose Design
PX1152M
•
•
•
•
90° x 45° Coverage Pattern
600W Cont. (2400W Peak) Power Handling
Passive/Biamp Selectable
Integral Rigging Point for PXSAM Strong Arm & Pole
• Mount for Tripod Use
High output 15" two-way monitor
• Dual ND2 2" Voice Coil, 1" Exit
Neodymium Compression Drivers
• VX3151 15LF Transducer with Forced Air Cooling
• Very High Sensitivity, 132 dB(PX1122M)
/ 134 dB(PX1152M) max. SPL
• Ultra-Compact, Low Profile, Multipurpose Design
•
•
•
•
90° x 45° Coverage Pattern
600W Cont. (2400W Peak) Power Handling
Passive/Biamp Selectable
Integral Rigging Point for PXSAM Strong Arm & Pole
• Mount for Tripod Use
PX2122
PX2152
PX2181
PX1122M
PX1152M
Frequency Range (-10 dB)
60 Hz - 19 kHz
50 Hz - 19 kHz
40 Hz - 180 Hz
55 Hz - 19 kHz
50 Hz - 19 kHz
Recommended High-Pass
Frequency
80 Hz (12 dB/Oct.)
40 Hz (12 dB/Oct.)
32 Hz (12 dB/Oct.)
50 Hz (12 dB/Oct.)
45 Hz (12 dB/Oct.)
Axial Sensitivity SPL 1 W/1 m
102 dB
99 dB
105 dB
98 dB
100 dB
Max. SPL /1 m (calc.); full space
138 dB
136 dB
141 dB
132 dB
134 dB
LF Power Handling (Passive)
–—
1200 W Cont. / 4,800 W Peak
–—
600 W Cont. / 2,400 W Peak
600 W Cont. / 2,400 W Peak
LF Power Handling (Biamp)
1000 W Cont. / 4,000 W Peak
1000 W Cont. / 4,000 W Peak
1000 W Cont. / 4,000 W Peak
500 W Cont. / 2,000 W Peak
Peak 500 W Cont. / 2,000 W Peak
HF Power Handling (Biamp)
80 W Cont. / 320 W Peak
80 W Cont. / 320 W Peak
–—
80 W Cont. / 320 W Peak
80 W Cont. / 320 W Peak
Coverage (nominal -6 dB) H° x V°
30° (or 45°) x 45° (or 30°)
60° (or 45°) x 45° (or 60°)
Omnidirectional
90° x 45°
90° x 45°
LF transducer
2 x 12” DVX3121
2 x 15” DVX3150
2 x 18” DVX3180
1 x 12” DVX3121
1 x 12” DVX3151
HF transducer
2 x 2” ND2-16
2 x 2” ND2-16
–—
2 x 2” ND2-16
2 x 2” ND2-16
Crossover Frequencies
1600 Hz
1,900 Hz
80 Hz - 125 Hz
80 Hz - 125 Hz
1,600 Hz 80 Hz - 125 Hz
LF Impedance
4 Ω Nominal
4 Ω Nominal
4 Ω Nominal
8 Ω Nominal
8 Ω Nominal
HF Impedance
8 Ω Nominal
8 Ω Nominal
–—
8 Ω Nominal
8 Ω Nominal
Input Connections
Neutrik Speakon NL4’s
Neutrik Speakon NL4’s
Neutrik Speakon NL4’s
Neutrik Speakon NL4’s
Neutrik Speakon NL4’s
Enclosure Material
18 mm Plywood with EVCoat™
18 mm Plywood with EVCoat™
18 mm Plywood with EVCoat™
18 mm Plywood with EVCoat™
18 mm Plywood with EVCoat
Dimensions (H x W x D)
1219 x 457 x 445 mm
1219 x 457 x 445 mm
1219 x 569 x 758 mm
546 x 366 x 305 mm
610 x 366 x 305 mm
(48” x 18” x 17,5”)
48” x 18” x 17,5”
48.0” x 22.42” x 29.85”
Net Weight
50.1 kg (110.3 lbs.)
45.6 kg (111.9 lbs.)
86.5 kg (190,5 lbs.)
23.1 kg (51 lbs.)
25.1 kg (55.3 lbs.)
Install
High output 12" two-way monitor
Mobile Audio
PX1122M
Speakers
Phoenix
Live for Sound
24.00” x 17.42” x 12.97”
39
QRx Series
Mobile Audio
Install
Speakers
Live for Sound
QRx Series has become the standard for regional sound
companies, rental professionals, and contractors who want
compact high-performance loudspeakers with concertgrade EV components. Covered with rugged EVCOAT,
QRx looks great stacked, on poles, as monitors, or flown
with simple, integrated, L-track rigging points on top and
bottom. Their unique, asymmetrical, fully rotable horns
with 15 degree downward bias ensures high-frequency
QRx 112/75
Compact 12" two-way
•
•
•
•
•
•
QRx 115/75
2-Way High-Output Full-range
High Sensitivity
Ultra-linear frequency response
Solid bass down to 52 Hz (-10 dB)
Vented LF enclosure
Asymmetric CD-horn aimed downward by 10°
2-Way High-Output Full-range
High Sensitivity
Ultra-linear frequency response
Solid bass down to 50 Hz (-10 dB)
Vented LF enclosure
Asymmetric CD-horn aimed downward by 10°
3" voice coil (titanium diaphragm)
Protection circuits for HF-driver and LF-woofer
Easy external operation mode selection
5-side multi-angled housing with monitor slant
•
•
•
•
•
3" voice coil (titanium diaphragm)
Protection circuits for HF-driver and LF-woofer
Easy external operation mode selection
5-side multi-angled housing with monitor slant
Same front width as Rx 118 S
Compact 18" subwoofer
• Subwoofer
• Direct radiating vented design
• High Sensitivity
40
•
•
•
•
Compact 15" two-way
•
•
•
•
•
•
QRx 118S
coverage without having to tilt the enclosure toward the
audience. Our powerhouse, the DH7 large-format driver
(three-inch voice-coil, 1.4-inch exit) provides the highfrequency engine, while a selection of DL and EVX woofers
anchor the low and sub frequencies. The combination of
high-level components, unique design, and versatility make
QRx Series one of the best values in the industry.
• Solid bass down to 30 Hz (-10 dB)
• Rectangular
• Equipped with shown features below
Speakers
QRx Series
Live for Sound
QRx 153/75 Compact 15" three-way
•
•
•
•
•
•
• Protection circuit for HF driver
• Trapezoidal cabinet (15° per side)
for tightpack situations
• Comes with L-track hardware and
single-stud ancra fittings
Compact dual 12" two-way
2-Way Highest-Output Full-range
High Sensitivity
Ultra-linear frequency response
Extended bass response down to 50 Hz (-10 dB)
Vented LF enclosure
•
•
•
•
•
Asymmetric CD-horn aimed downward by 10°
3" voice coil (titanium diaphragm)
Protection circuits for HF-driver and LF-woofers
Easy external operation mode selection
Trapezoidal (10° per side)
Mobile Audio
•
•
•
•
•
Install
QRx 212/75
Three-way, high-output, full-range loudspeaker
Biamp only
Solid bass to 42 Hz (-10dB)
Vented LF enclosure
Asymmetrical CD horn aimed downward by 10°
3" HF voice coil (titanium diaphragm)
QRx 218S
Compact dual 18" subwoofer
•
•
•
•
•
Frequency Range (-10 dB)
Subwoofer
Direct radiating vented design
High Sensitivity
Solid bass down to 31 Hz (-10 dB)
Rectangular
• Also perfect in combination with
large HP and MH horns
• Equipped with shown features below
• Flyable version available
QRx112/75
QRx115/75
QRx153
QRx(H) 212/75
QRx118
QRx218S
52 Hz - 18 kHz
45 Hz - 16 kHz
42 Hz - 20 kHz
52 Hz - 15 kHz
30 Hz - 250 Hz
31 - 250 Hz
Frequency Range (-3 dB) with controller amp
75 Hz - 15 kHz
60 Hz - 15 kHz
50 Hz - 16 kHz
75 Hz - 18 kHz
45 Hz - 150 Hz
38 - 125 Hz
Recommended High-pass frequency
45 Hz (12 dB/Oct.)
45 Hz (12 dB/Oct.)
—
45 Hz (12 dB/Oct.)
36 Hz (12 dB/Oct.)
35 Hz (12 dB/Oct.)
Axial Sensitivity SPL 1W/1m
(Biamp operation)
100 dB
(100/112 dB)
100 dB
(98/110 dB)
98/105 dB
102 dB
(102/112 dB)
98 dB
102 dB
Max. SPL / 1m (calc.)
131 dB
133 dB
130 dB
129 dB/135 dB
131/137 dB *
139 dB
Continuous Power Handling
350 W (300 W/75 W)
450 W (400 W/75 W)
400 W/150 W/150 W
650 W (600 W/75 W)
600/800 W
1200 W
Peak Power Handling (Biamp)
1,400 W (1,200/300 W)
1,800 W (1,600/300
W)
1,600 W/600 W/600 W
2,600 W (2,400/300 W)
2,400/3,200 W
4,800 W
Coverage (nominal -6 dB) H° x V°
75° x 50°
(asym. CD horn)
75° x 50°
(asym. CD horn)
75° x 50°
(asym. CD horn)
75° x 50°
(asym. CD horn)
essentially
omni
essentially
omni
LF woofer (transducer)
12” (DL12BFH)
15” (DL15X)
15” (DL15ST)
2 x 12” (DL12BFH)
1x18”(EVX) /
2x15”(DL15)
2 x 18” (DL18MT)
VC diameter
3” (DH7)
3” (DH7)
8” MF8 MF/ 3” DH7 HF
3” (DH7)
---
---
Crossover Frequencies (slope in Biamp
mode)
1,500 Hz (24 dB/Oct.)
1,500 Hz (24 dB/Oct.)
1,200 Hz
1,500 Hz (24 dB/Oct.)
100 Hz (24 dB/Oct.)
100 Hz (24 dB/Oct.)
Nominal Impedance (Biamp mode)
8 Ω (8 Ω/8 Ω)
8 Ω (8 Ω/8 Ω)
8 Ω/12 Ω/12 Ω
4 Ω (4 Ω/8 Ω)
8/4 Ω
4Ω
Input Connections
2 Neutrik® NL4
2 Neutrik® NL4
2 Neutrik® NL4
2 Neutrik® NL4
2 Neutrik® NL4
2 Neutrik® NL4
Dimensions (H x W at front x D)
675 x 390 x 372 mm
26.6” x 15.36” x 16”
759 x 450 x 407 mm
29.9” x 17.72” x 16.02”
1,240 x 467 x 485 mm
41.5” x 18.4” x 19.12”
990 x 390 x 375 mm
38.98” x 15.47” x 14.77”
902 x 450 x 600 mm
35.5” x 17.7” x 23.6”
1015 x 560 x 602 mm
39” x 22.05” x 23.6”
Net Weight (subs without wheel kit)
26.0 kg (58 lbs.)
32.0 kg. (71 lbs.)
47 kg (97 lbs.)
36.5 kg. (80 lbs.)
47.5/48.5 kg (100/102
lbs.)
68 kg (150 lbs.)
*Half space
41
Tour X
Install
Speakers
Live for Sound
Tour X embodies the same engineering excellence and
aesthetic design found in every world-class EV tour
system. Its form is seamlessly integrated into practical,
functional elements that make a bold statement about the
TX1122
multi-application purpose and breakthrough performance.
A host of innovative features and patent-pending designs
make Tour X the most exciting portable loudspeaker series
available.
12" two-way
Mobile Audio
• DH3 1.25" (32 mm) Diaphragm, 1" (25 mm)exit pure titanium compression driver
• SMX2120 12(305 mm) LF transducer
with fully symmetric drive
• Advanced fourth-order crossover with HF protection
TX1152
•
•
•
•
•
60° x 40° rotatable coverage pattern
100 dB sensitivity, 133 dB maximum SPL
500 W continuous, 2000 W peak power handling
Pole mount for tripod use
Six 3/8" threaded points for suspension
•
•
•
•
60° x 40° rotatable coverage pattern
103 dB sensitivity, 139 dB maximum SPL
1000 W continuous, 4000 W peak power handling
Six 3/8" threaded points for suspension
Dual 15" Two-way Full-range
• ND2-8 2" (51 mm) diaphragm, 1" (25.4 mm)exit neodymium compression driver
• Dual SMX2151 15" (381 mm) LF
transducers with fully symmetric drive
• Advanced sixth-order crossover with HF protection
42
90° x 50° coverage pattern
97 dB sensitivity, 130 dB maximum SPL
500 W continuous, 2000 W peak power handling
Pole mount for tripod use
Six 3/8" threaded points for suspension
15" two-way
• DH3 1.25" (32 mm) Diaphragm, 1" (25 mm)exit pure titanium compression driver
• SMX2151 15" (381 mm) LF transducer
with fully symmetric drive
• Advanced fourth-order crossover with HF protection
TX2152
•
•
•
•
•
18" subwoofer
TX2181
• EVS-18S 18" (457 mm)
LF transducer
• 100 dB sensitivity, 132
dB maximum SPL
• Integrated low pass filter
with 6 dB / octave slope
• 500 W continuous, 2000
W peak power handling
• Pole mount to elevate a
two-way loudspeaker
• Mounting points to attach
optional TX-W1 wheel kit
TX1122FM
12" two-way dedicated floor monitor
with fully symmetric drive
• Integrated crossover with steep 24 dB
/ octave slopes and HF protection
• 90° x 50° coverage pattern
• 500 W continuous, 2000 W peak power handling
Mobile Audio
• 55° compact vertical floor monitor with
Signal Synchronized Transducers™
• 99 dB sensitivity, 132 dB maximum SPL
• DH3 1.25" (32 mm) diaphragm, 1" (25 mm)exit pure titanium compression driver
• SMX2121 12" (305 mm) LF transducer
TX1152FM
Dual 18" subwoofer
• Dual EVS-18S 18" (457 mm)
LF transducers
• 103 dB sensitivity,
138 dB maximum SPL
• 1000 W continuous, 4000 W
peak power handling
• Four integrated handles
for easy portability
• Mounting points to attach
optional TX-W1 wheel kit
15" two-way dedicated floor monitor
• 55° vertical floor monitor with Signal
Synchronized Transducers™
• 100 dB sensitivity, 133 dB maximum SPL
• DH3 1.25" (32 mm) diaphragm, 1"(25 mm)exit pure titanium compression driver
• SMX2151 15" (381 mm) LF transducer
with fully symmetric drive
Install
TX1181
Speakers
Tour X
Live for Sound
• Integrated crossover with steep 24 dB
/ octave slopes and HF protection
• 90° x 50° coverage pattern
• 500 W continuous, 2000 W peak power handling
TX1122
TX1152
TX2152
TX1181
TX2181
TX1122FM
TX1152FM
Frequency Response (-3 dB)
60 - 20000 Hz
55 - 20000 Hz
55 - 13000 Hz
50 - 160 Hz
50 - 160 Hz
70 - 20000 Hz
65 - 20000 Hz
Sensitivity 1 W/1 m
97 dB
100 dB
103 dB
100 dB
103 dB
99 dB
100 dB
Max. SPL/1m (calc)
130 dB
133 dB
139 dB
132 dB
138 dB
132 dB
133 dB
System Power Handling (Continuous/Program/Peak)
500 Watts/2000 peak
500 Watts/2000 peak
1000 Watts/4000 peak
500 Watts2000 peak
1000 Watts4000 peak
500 Watts2000 peak
500 Watts/2000 peak
Nominal Impedance (Passive)
8Ω
8Ω
4Ω
8Ω
4Ω
8Ω
8Ω
Speaker Type
Fullrange
Fullrange
Fullrange
Subs
Subs
Fullrange
Fullrange
Input Connections
Parallel Neutrik® NL4
Parallel Neutrik® NL4
Parallel Neutrik® NL4
Parallel Neutrik® NL4
Parallel Neutrik® NL4
Parallel Neutrik® NL4
Parallel Neutrik® NL4
Frequency Response (-10 dB)
45 - 20000 Hz
40 - 20000 Hz
50 - 18000 Hz
45 - 700 Hz
40 - 1500 Hz
55 - 20000 Hz
45 - 20000 Hz
Coverage(Nominal -6 dB) H°
90 °
60 °
60 °
90 °
90 °
Coverage(Nominal -6 dB) V°
50 °
40 °
40 °
50 °
50 °
LF Transducer
SMX2120
SMX2151
(2) SMX2151
SMX2121
SMX2151
HF Transducer
DH3
DH3
ND2
DH3
DH3
Crossover Frequency
1750 Hz
1650 Hz
1750 Hz
1600 Hz
1750 Hz
Minimum Impedance
5.4 Ω
5.6 Ω
3.1 Ω
7.5 Ω
2.9 Ω
6.4 Ω
6.2 Ω
Enclosure Material
Plywood and MDF with
EVCOAT
Plywood and MDF with
EVCOAT
Plywood and MDF with
EVCOAT
Plywood and MDF with
EVCOAT
Plywood and MDF with
EVCOAT
Plywood and MDF with
EVCOAT
Plywood and MDF with
EVCOAT
Suspension
(6) 3/8-inch threaded
inserts
(6) 3/8-inch threaded
inserts
(6) 3/8-inch threaded
inserts
EVS18S
(2) EVS18S
Internal Crossover
Yes
Yes
Yes
Yes
No
Yes
Yes
Flying
Yes
Yes
Yes
No
No
No
No
Rotatable Horn
No
Yes
Yes
No
No
Height
Width
Depth
24.25 in (616 mm)
15.04 in (382 mm)
14.96 in (380 mm)
30.55 in (776 mm)
17.56 in (446 mm)
17.56 in (446 mm)
45.43 in (1154 mm)
20 in (508 mm)
18.54 in (471 mm)
30.28 in (769 mm)
17.28 in (439 mm)
23.27 in (591 mm)
45.43 in (1154 mm)
20 in (508 mm)
27.2 in (691 mm)
17.32 in (440 mm)
14.33 in (364 mm)
22.56 in (573 mm)
18.7 in (475 mm)
17.28 in (439 mm)
25.79 in (655 mm)
Weight Net
44.53 lbs (20.2 kg)
61.29 lbs (27.8 kg)
94.36 lbs (42.8 kg)
74.52 lbs (33.8 kg)
123.68 lbs (56.1 kg)
43.65 lbs (19.8 kg)
23.11.02 lbs (5 kg)
43
Live X Loudspeaker Series
Speakers
Live for Sound
Clear, powerful and musical Electro-Voice loudspeakers
command the stage at high-profile venues and major
events worldwide. Born stage-ready, the Live X series
includes powered and passive models that all feature
EV-engineered components in solid wood cabinets.
Wherever performance matters, Live X is serious gear for
serious sound.
ELX112
ELX112P 12" two-way powered
12" two-way
Mobile Audio
• 12” woofer and 1.5” high-frequency
titanium compression driver
• 55 Hz – 20 kHz frequency range 94 dB
SPL sensitivity; 132 dB max SPL
• 250 W continuous and 1000 W
peak power handling
• Rugged wood cabinet — pole-mounts
or stacks with Live X Subwoofers
ELX115
15" two-way
• 15” woofer and 1.5” high-frequency
titanium compression driver
• 50 Hz – 20 kHz frequency range 95 dB
SPL sensitivity; 134 dB max SPL
• 400 W continuous and 1600
W peak power handling
• Rugged wood cabinet — pole-mounts
or stacks with Live X Subwoofers
ELX118
18" subwoofer
• 18” woofer provides extended
low-frequency output
• 32 Hz – 200 kHz frequency range 96
dB SPL sensitivity; 134 dB max SPL
• 400 W continuous and 1600
W peak power handling
• Rugged wood cabinet—supports polemounted or stacked Live Loudspeakers
44
• 12” woofer and 1.5” high-frequency
titanium compression driver
• 50 Hz – 20 kHz frequency range;
132 dB max SPL
• 1000 W Class D lightweight amplifier
— runs cool without fans
• Easy to connect and control with
versatile input and output options
• Rugged wood cabinet — pole mounts
or stacks with Live X Subwoofers
ELX115P 15" two-way powered
• 15” woofer and 1.5” high-frequency
titanium compression driver
• 44 Hz – 20 kHz frequency range; 134 dB max SPL
• 1000 W Class D lightweight amplifier
— runs cool without fans
• Easy to connect and control with
versatile input and output options
• Rugged wood cabinet — pole mounts
or stacks with Live X Subwoofers
ELX118P
18" subwoofer powered
• 18” woofer provides extended
low-frequency output
• 32 Hz – 200 kHz frequency range 96
dB SPL sensitivity; 134 dB max SPL
• 400 W continuous and 1600
W peak power handling
• Rugged wood cabinet—supports polemounted or stacked Live Loudspeakers
Live X Loudspeaker Series
ELX215
Mobile Audio
Speakers
Live for Sound
Dual 15" Two-way
• Dual 15” woofers and a 1.5” highfrequency titanium compression driver
• 38 Hz – 20 kHz frequency range
• 96 dB SPL sensitivity; 137 dB max SPL
• 600 W continuous and 2400 W peak power handling
• Rugged wood cabinet creates serious stage presence
ELX112
ELX112P
ELX115
ELX115P
ELX118
ELX118P
ELX215
Frequency Response (-3 dB)
85 - 17000 Hz
85 - 17000 Hz
60 - 20000 Hz
60 - 20000 Hz
36 - 210 Hz
36 - 210 Hz
46 - 18000 Hz
Sensitivity 1 W/1 m
99 dB
99 dB
100 dB
100 dB
100 dB
100 dB
Max. SPL/1m (calc)
128 dB
128 dB
130 dB
130 dB
131 dB
131 dB
100 dB
System Power Handling
(Continuous/Program/Peak)
250 Watts
250 Watts
250 Watts
250 Watts
350 Watts
350 Watts
600 Watts
Nominal Impedance (Passive)
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
4Ω
Speaker Type
Fullrange, Two-Way,
Wedges
Fullrange, Two-Way,
Wedges
Fullrange, Mid-High,
Two-Way
Fullrange, Mid-High,
Two-Way
Subs
Subs
Fullrange, Mid-High,
Two-Way
Input Connections
Parallel Neutrik® NL4
Parallel Neutrik® NL4
Parallel Neutrik® NL4
Parallel Neutrik® NL4
Parallel Neutrik® NL4
Parallel Neutrik® NL4
Parallel Neutrik® NL4
40 - 20000 Hz
40 - 20000 Hz
Frequency Response (-10 dB)
35 - 20000 Hz
Coverage(Nominal -6 dB) H°
55 °
55 °
80 °
80 °
omni
omni
80 °
Coverage(Nominal -6 dB) V°
80 °
80 °
55 °
55 °
omni
omni
50 °
Internal Crossover
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Chassis Size
12 in (304.8 mm)
12 in (304.8 mm)
15 in (381 mm)
15 in (381 mm)
18 in (457.2 mm)
18 in (457.2 mm)
15 in (381 mm)
Flying
No
No
No
No
No
No
No
Outdoor
No
No
No
No
No
No
No
Color
Black
Black
Black
Black
Black
Black
Black
Height
Width
Depth
21.5 in (546 mm)
14.21 in (361 mm)
9.69 in (246 mm)
21.5 in (546 mm)
14.21 in (361 mm)
9.69 in (246 mm)
25.51 in (648 mm)
18.31 in (465 mm)
15.2 in (386 mm)
25.51 in (648 mm)
18.31 in (465 mm)
15.2 in (386 mm)
25.51 in (648 mm)
20.39 in (518 mm)
23.5 in (597 mm)
25.51 in (648 mm)
20.39 in (518 mm)
23.5 in (597 mm)
45.98 in (1168 mm)
17.91 in (455 mm)
20.24 in (514 mm)
Weight Net
28.44 lbs (12.9 kg)
28.44 lbs (12.9 kg)
53.13 lbs (24.1 kg)
53.13 lbs (24.1 kg)
87.74 lbs (39.8 kg)
87.74 lbs (39.8 kg)
114.64 lbs (52 kg)
45
Variplex II Systems
Install
Speakers
Live for Sound
The Variplex II is one example of the many THX-approved
Electro-Voice systems. They join the large, diverse family
of EV cinema products developed for both large and small
cinemas. EV's wide range of products and time-proven
acoustic excellence ensures that any system can be
designed to fit any room, and more importantly, that the
cinema experience will be the best your customers have
ever heard. And take note: The THX-approved, highquality, CPS Series amplifiers are part of this formula for
success.
Variplex II
•
•
•
•
Three-way stage system
Vari-Intense® technology provides
uniform front-to-back coverage
Ring-Mode Decoupling™ improves
vocal clarity and intelligibility
• Variplex™ B model features passive MB/
HF crossover for biamping
• THX® approved
• Digital Dynamics Capable™
Variplex XL
• Three-way, high-output stage system
• High-output MB and HF drivers
• Vari-Intense® technology provides
uniform front-to-back coverage
• Ring-Mode Decoupling™ improves
vocal clarity and intelligibility
• THX® approved
• Digital Dynamics Capable™
Variplex Matinee Three-Way Screen Channel Speaker
• Three-way design for intelligibility and clarity
• Asymmetric Directed Coverage™ technology
for even coverage from simple installation
• Very uniform frequency response
46
• Digital Dynamic Capable™, wide dynamic range
• Compact and fully assembled
• Passive or bi-amp operation
TL Series
TL Series low-frequency systems offer a variety of lowfrequency solution for general fixed installation or lowfrequency supplementation in existing installations. Lowfrequency systems have f3s as low as 40 Hz. Response
below 30 Hz is generally required for theatrical effects,
reproduction of pipe organs, and some special effects
in contemporary music, such as synthesizers and downtuned bass guitars. The TL 880D is specially suited for this
special type of application.
Install
Speakers
Live for Sound
TL880D
• Very-low-frequency subwoofer
• Direct radiating vented design
• High acoustic output to below
• 20 Hz (-10 dB) allows real low end effects
• THX® approved
Variplex II XL
Variplex II
Variplex M
TL880D
Frequency Range
34 Hz - 16 kHz
34 Hz - 16 kHz
45 Hz - 18 kHz
23 Hz - 1.8 kHz
Sensitivity, 1W/1m (LF/MF/HF)
104/109/112 dB
101/109/112 dB
104 dB
99 / 105 dB
Max.SPL/1m (calc.) (ave./peak)
130 / 136 dB
130 / 136 dB
127 / 133 dB
136 / 162 dB
Crossover Frequency
500Hz / 1300 Hz
500Hz / 1300 Hz
500 Hz
Long-term Power Handling (LF/MF/HF)
1600/400/75 W
800/400/75 W
500 / 300 W
1.200 W
Short-term Power Handling (LF/MF/HF)
6400/1600/300 W
3200/1600/300 W
2000 / 1200 W
4.800 W
Coverage Horizontal (long axis/short axis)
90°
90°
90°
omnidirectional
Coverage Vertical (up/down)
20°/30°
20°/30°
20°/30°
HF driver
ND 6-8
ND6-8
DH2T
MF driver
2 x EV8DH
2 x EV8DH
2 x EV8D
LF driver
4 x DL15ST
2 x DL15ST
2 x EV15G
2 x EVX180B
Nominal Impedance
2x4/4/8Ω
4/4/8Ω
4/4Ω
4Ω
Dimensions (Height/Width/Depth)
1924 x 1296 x 396 mm
1924 x 648 x 396 mm
1924 x 648 x 396 mm
1210 / 762 / 605
75.8” x 51” x 15.6”
75.8” x 25.5” x 15.6”
75.8” x 25.5” x 15.6”
47.5”x30”x23.8”
139 kg (306.4 lbs.)
74 kg (163.1 lbs.)
72,6 kg (160.1 lbs.)
72,6kg (160 lbs)
Weight (net)
47
SL Series
Install
Speakers
Live for Sound
Proven in thousands of installations and live applications
around the world including the Olympics, the FIFA World
Cup, Live 8, and Live Earth, EV delivers truly state-ofthe-art DSP for today's applications. EV's flagship digital
sound system processor, the Dx46, sets the standard for
SL10-2V SL12-2V
digital loudspeaker controllers and processors, providing
48-bit filter algorithms, 24-bit AD/DA conversion, and a
dynamic range of 115 dB. The EV DC-One is a two-in, sixout digital signal processor for loudspeaker management
and optimization.
SL Series Cinema Speaker Systems
•
•
•
•
High-output, two-way surround loudspeaker
Versatile suspension and safety options
15° slanted cabinet
Exceptionally wide and smooth frequency response
•
•
•
•
•
Full-Bandwidth overload protection
Strong-Arm-Mount™ for easy, flexible aiming
Lightweight, unobtrusive plastic enclosure
Easy-access input terminals
8-2way with 1,25” compression driver
•
•
•
•
SL10-2V model has 10" woofer
SL10-2V includes wall mounting brackets
THX® compatible
Digital Dynamics Capable™
SL8.2
SL12-2V
48
SL10-2V
SL8.2
60 - 20kHz
Frequency Range
70Hz - 20 kHz
60Hz - 20kHz
Sensitivity, 1W/1m
93 dB
93 dB
Max.SPL/1m (calc.) (ave./peak)
116 / 121 dB
113 / 119 dB
115/121 dB
Long-term Power Handling
200W
100 W
200 W
Short-term Power Handling
800 W
400 W
800 W
Coverage (H x V)
100° x 90°
100° x 100°
100° x 100°
LF driver
12” woofer
10” woofer
EV8L
HF driver
DH2010A
1” compression driver
DH2005
Nominal Impedance
8Ω
8Ω
8Ω
Dimensions (Height/Width/Depth) in mm
535 x 476 x 335
476 x 318 x 275
451 x 282 x 263
21” x 18.7” x 13”
18.75” x 12.5” x 10.8”
17.75” x 11.12” x 10.35”
Weight (net)
21,4 kg (47 lbs.)
10,5 kg (23.1 lbs.)
8.4 kg (18.5 lbs)
EV compression driver requirements call for ultraprecise tolerances, state-of-the-art modeling routines,
and exceptional engineering expertise. Manufacturing
techniques are frequently pushed to process limits, and
materials are formed and stabilized with cutting-edge
DH2T-8/DH2T-16
systems and controls. Each EV compression driver's
parameters are tightly controlled to ensure world-class
performance, putting these drivers at the top of the class in
every respect.
DH3/2010A 1.25" Driver
2" Driver
• One-inch exit screw-on, mediumformat compression driver
• 160-watt power rating
• 2" titanium diaphragm
• High performance on a wide variety
of thread-on horn designs
DH7-8/DH7-16 High-Value 3" Driver
• One-inch exit screw-on, smallformat compression driver
• 80-watt power rating
• 1.25" titanium diaphragm
• Excellent extended-bandwidth
• HF driver for multi-way
loudspeaker systems
ND6-8/ND6-16 High-Value 3" Driver
• Large-format ceramic
compression driver
• 300-watt power rating
• 3" titanium diaphragm
• 1.4" or 2" exit diameter for use on
almost any highperformance horn
• Excellent for use with directradiator
or horn-loaded LF and MB sections
ND6x-8/ND6-16
•
•
•
•
•
Speakers
Compression Drivers
Live for Sound
• Large-format neodymium
compression driver
• 300 W power rating
• 3" titanium diaphragm 1.4"
or 2" exit diameter for use
on almost any HP horn
• EV's highest-performance
compression driver gives
world-class performance
in any application
High-Performance High-Value 3" 500 Hz Driver
Large-format neodymium compression driver
300 W power rating
3" titanium diaphragm with 1.4" or 2" exit diameter for use on almost any HP horn
EV's highest-performance compression driver gives world-class performance in any application
ND6X from > 500 Hz
DH7-8/DH7-16
ND6-8/ND6-16
DH2T
DH3/DH2010A
Frequency response
1,000 Hz–20 kHz
1,000 Hz–20 kHz / 500Hz-16kHz (ND6X)
1,200 Hz–20 kHz
1,500 Hz–20 kHz
Crossover frequency (minimum)
1,000 Hz
1,000 Hz
1,200 Hz
1,500 Hz
Midband sensitivity*
111 dB
112 dB
112 dB
111 dB
Long-term power rating (AES)
75 W
75 W
40 W
20 W
Short-term power rating
300 W
300 W
160 W
80 W
Impedance
8/16 Ω
8/16 Ω
8Ω
8Ω
Throat diameter
35 mm adapter (1.4”/2.0”)
35 mm adapter (1.4”/2.0”)
25 mm ()
1.0” (25 mm)
Diaphragm diameter
76 mm (3.0”)
76 mm (3.0”)
50 mm (2.0”)
32 mm (1.25”)
Overall diameter
165 mm (6.5”)
132 mm (5.2”)
132 mm (5.2”)
107 mm (4.5”)
Overall depth
69 mm (2.7”)
69 mm (2.7”)
89 mm (3.5”)
89 mm (3.5”)
Net weight
4.54 kg (10.0 lbs)
2.5 kg (5.5 lbs)
2.27 kg (5.0 lbs)
1.5 kg (3.4 lbs)
*Average from 1,000 Hz–5 kHz on
HP6040 horn (DH3 average from 1,500
Hz–5 kHz on HPT64 horn)
49
Live for Sound
Speakers
Low Frequency Transducers
EV component woofers are high-efficiency designs highly
refined from years of development and field experience.
They employ extended-length voice coils for high-impact
reproduction of dynamic low-frequency program. All
woofers feature proprietary heat-transfer systems for
unmatched power capacity and reliability. Kevlar®-fibercomposite cones are used to provide structural strength
DL12BFH
Chassis
•
•
•
•
•
EVX155
Chassis
•
•
•
•
•
•
•
EVX180B
15" woofer
Cast Aluminium frame
600 watt cont. 2400 watt peak
98 dB Sensitivity
RMD
Touring grade performance
4" Edge Wound Voice Coil
Chassis
•
•
•
•
•
•
50
12" woofer
Cast Aluminium frame
300 watt Cont. 1200 watt peak
100 dB Sensitivity
RMD
18" woofer
Cast Aluminium frame
600 watt cont. 2400 watt peak
99 dB sensitivity
Touring grade performance
4" Edge Wound Voice Coil
to resist collapse during explosive dynamic peaks and
to provide internal mechanical damping to minimize
resonances that can change the character of the sound
at high levels. DL and EVX woofers are made of cast
aluminium frames with push terminals, and all feature RingMode Decoupling™ (RMD™) except for the DL18MT and
the EVX180B.
EVM Instrument Speakers
Speakers
Live for Sound
Built to capture his tone, and withstand his abuse, the EVM12L Black Label is Zakk‘s only choice.
Meticulously voiced to duplicate the sound of the legendary EVM12L, the EVM12L Classic recaptures a tonality loved by
guitarists in virtually every genre.
•
•
•
•
•
Mobile Audio
EVM12L BlackLabel Zakk Wylde signature guitar speaker
the OFFICIAL guitar loudspeaker of Zakk Wylde and Black Label Society
improved power handling, improved magnet design, better venting
300W
Frequency Response 80Hz - 7kHz
Sensitivity 100dB
EVM12L Classic
The Classic EVM12L guitar speaker
• 200W Power handling
• Frequency response: 80Hz – 7kHz (at -10 dB down)
• Heavy-duty cast frame reduces the low-frequency flex
inherent in stamped frame designs.
• Large 16lbs (7.3kg) magnet allows for higher efficiency,
better cooling and maximum output
• Manufactured in the USA
DL12BFH
EVX155
EVX180B
EVM12L Black Label
EVM12L Classic
Cone diameter
12” (305 mm)
15” (381 mm)
18” (457 mm)
12” (305mm)
12” (305mm)
Coil diameter
2.5” (63.5 mm)
4” (101.6 mm)
4” (101.6 mm)
2.5” (63.5 mm)
2.5” (63.5 mm)
Impedance
8Ω
8Ω
8Ω
8 or 16 Ω
8 or 16 Ω
Frequency range
60–2,500 Hz
40–2,000 Hz
30–800 Hz
80Hz–7kHz
80Hz–7kHz
Long-term power rating (EIA)
300 W
600 W
600 W
300 W
200 W
Short-term power rating
1,200 W
2,400 W
2,400 W
1200 W
1000 W
Sensitivity (1 W @ 1 m)
96 dB
98 dB
98 dB
100 dB
100 dB
Maximum SPL
120.8 dB
125.8 dB
125.8 dB
125 dB
125 dB
Efficiency
3.69%
4.32%
3.4%
5.9%
5.9%
Frame front diameter
309.6 mm (12.19”)
385.0 mm (15.16”)
460.5 mm (18.13”)
309.6 mm (12.19”)
309.6 mm (12.19”)
Magnet diameter
155.6 mm (6.13”)
209.6 mm (8.25”)
8.25” (209.6 mm)
190.5 mm (7.5”)
190.5 mm (7.5”)
Overall depth
133.4 mm (5.25”)
184.2 mm (7.25”)
203.2 mm (8.00”)
133.4 mm (5.25”)
133.4 mm (5.25”)
Mounting bolt circle diameter
293.7 mm (11.563”)
369.9 mm (14.563”)
441.3 mm (17.375”)
293.7 mm (11.563”)
293.7 mm (11.563”)
Baffle cutout diameter
281.0 mm (11.063”)
357.2 mm (14.063”)
425.5 mm (16.750”)
281.0 mm (11.063”)
281.0 mm (11.063”)
Net weight
5.0 kg (11.1 lbs.)
10.3 kg (22.8 lbs.)
10.6 kg (23.4 lbs.)
8.6 kg (19 lbs.)
8.6 kg (19 lbs.)
51
Speakers
Rigging and Accessories
EVI 12/15/28
Live for Sound
EBK-1 (Eyebolt-Kit)
EVI-12
Ceiling mount
EVI-12MBB
EVI-12MBW
EVI-15
Ceiling mount
EVI-28
EVI-15MBB
EVI-15MBW
black
white
Wall or ceiling mount
black
white
EVI-28MBB
EVI-28MBW
black
white
The radius of action is 140°.
EVID 12.1
1 Eyebolt is included.
Note: One 3/8“-16-thread
forged steel eyebolt is
included. A second is
necessary!
EVID 3.2 / 4.2 / 6.2
Angle markers
100°
EVID 12.1
90°
SAM™ comes with
each EVID™ system
and includes a
hex-key-tool. SAM™
has angle markers
to make installation
easier.
Bracket passes EIA 636 at a
safety factor of 8:1.
The bracket for on-wall or corner
mounting and a safety eyebolt
comes with EVID 12.1.
FRi-2082
Under balcony/on-wall mount
on-wall
52
The 100° x 100°
dispersion angle
allows one to install
FRi-2082 vertically
on the wall as well.
Mounting bracket
comes with FRi-2082.
EVF Series / EVH Series
4 M10 metric eyebolts included
Xi- 1082
Under balcony or
on-wall mount
MB-1082: black
S-40
Wall, ceiling or stand mount
Sx 100/300, Sb 122
Note: The threat diameter can be reduced with
a standard 5/8-inch screw adapter for different
mic stands.
S-40 MB/B:
S-40 MB/W:
1) MB 100
2) MB 100 + MB 200
black
white
1)
Sx 80
Wall or ceiling mount
2)
Sx 250/SxA250
Security advice:
When flown by 90° (figure 2)
don’t use eyebolts only!
Stand mount
Sk-1 Rigging Kit
For cost effective
installation.
Sx 80 MBB
Sx 80 MBW
Speakers
Rigging and Accessories
Live for Sound
For speakers stands
with 35 mm diameter.
black
white
Sx 80 SM black
Sx 100 / Sx 300 / Sb 122
Horizontal Cluster 120° (2 systems)
Horizontal Cluster 180° (3 systems)
2 x MB 200 + 1 x MB 300 neccessary
3 x MB 200 + 2 x MB 300 neccessary
Wall or ceiling-mount
1 x MB 200 neccessary
2 x MB 200 neccessary
Eyebolt
neccessary
Sx-Series™ hardware-overview:
Sx 100+
MB 200 B
MB 200 W
Sx 80
Sx 80 SM
Stand mount
Sx 80 MBB U-bracket
Sx 80 MBW U-bracket
Sx 300
MB 300 B
Sb 122
MB 300 W
black
black
white
Vertical Cluster
3/8“ Quick links
neccessary
U-bracket
U-bracket
black
white
Array-kit (2 plates)
black
Array-kit (2 plates)
white
53
Speakers
Rigging and Accessories
Live for Sound
ZX1
ZX1-90 + TCA-ZX1
ZX1i + AB-ZE
ZX1 - 90 + MP1 -B
ZX3 / ZX5
MB-3/MB-5 Wall/Ceiling mounting bracket
VSA-1 using HA3
SSK-1
54
CB5 cluster bracket kit
EBK-3 M8 eyebolt kit
HA-3 or HA-5 handel adapter
to be used with VSA-1
Rigging and Accessories
Speakers
Live for Sound
EV Innovation
EVF / EVH Series
VRK-1
VRK-2
HRK and VRK
rigging kits
(HRK not shown)
EVA / EVF / EVH Series
CDG
Dual gland nut cover plate
gland nut cover plates
CDNL4
Dual NL4 cover plate
CSG
Single Gland Nut cover plate
55
Speakers
Rigging and Accessories
XLD281 + XLC215 + AGCD
XLD281 + XS212 + CBeam
56
Live for Sound
XLD281 + XS 212
XLD281 + XS212 + Dolly
XLC concert/portable Rigging
B-1 Grid for XLC
(other rigging hardware included with speaker)
Rigging and Accessories
XLCi install rigging
Speakers
Live for Sound
B-2 Grid for XLCi
(other rigging hardware included with speaker)
XLC and XLVC ground stack kits
XGS-3
XGS-4
57
Tour Grade Amplifiers
Tour Grade amplifiers are designed for most demanding
audio applications in touring sound and fixed installation.
Based on Grounded Bridge Class-H topology, they offer a
unique combination of high output power, sonic excellence
and High-efficiency in a compact lightweight format.
Their integrated switch-mode power supply provides
TG5
Electronics
58
sufficient headroom to ensure high dynamic outputs and
reliable operation on extreme low loads.
Optional IRIS-Net™ Module RCM-26 opens up a whole
world of state-of-the-art DSP including FIR-Drive, remote
control, networking and unique system supervision – down
to an individual loudspeaker component.
Tour Grade Amplifier
•
•
•
•
•
TG7
Live for Sound
Up to 2 x 1900 W into 2 Ω
Grounded Bridge Class-H design
Switch-mode power supply
Microprocessor-controlled
Front LCD panel for operation mode
set-up and monitoring
• Slot for optional RCM-26 IRIS-Netcompatible DSP and control module
• 11-level protection package
• Only 31.4 lbs (14.2 kg)
Tour Grade Amplifier
•
•
•
•
•
Up to 2 x 3500 W into 2 Ω
Grounded Bridge Class-H design
Switch mode power supply
Microprocessor-controlled
Front LCD panel for operation mode
set-up and monitoring
• Slot for optional RCM-26 IRIS-Net
compatible DSP and control module
• 11-level protection package
• Only 32 lbs (14.5 kg)
Tour Grade Amplifiers
Live for Sound
Remote Control Interface
•
•
•
•
RCM-26
USB-CAN converter for IRIS-Net enabled devices
Supports up to 100 CAN devices
Parallel CAN connections on RJ-45 Ethercons
USB-powered
• XLR jack for audio bus monitoring
• 19" rackmount panel included
• Status LED shows CAN activity and device status
Concert
UCC1
IRIS-Net Remote Control Module for Tour Grade Amplifiers
• Pilot tone detection for cable supervision
• Six recallable DSP/configuration presets
• Parallel RJ-45 CAN bus connectors
Mobile Audio
Install
• Extensive DSP Functionality including
FIR-Drive technology
• High precision load impedance supervision
• Two GPI and two GPO ports
• One-button system check allows a complete
diagnostic test of all connected cables and
loudspeaker components in a matter of minutes
TG5
TG7
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
2000 W
1450 W
850 W
3500 W
2500 W
1500 W
Continuous Output Power(20-20 kHz, THD<0,2%)
1200 W
600 W
2100 W
1050 W
Maximum Bridged Output
3800 W
2900 W
7000 W
5000 W
Continuous Output Power(1 kHz, THD 1%)
Amplifier Gain
39 dB, 35 dB 32 dB (switchable)
Analog Inputs
2 audio inputs on internal slot connector, pre-/post fader
selectable
CAN Bus Interface
10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control)
DIM 30
41.5 dB, 35 dB, 32 dB (switchable)
Optional with RCM-26
Optional with RCM-26
0.02 %
0.02 %
Input Impedance (Balanced)
20 kΩ
20 kΩ
Input Sensitivity
0 dBU/+6dBu/+7dBu (switchable)
0 dBu / 4 dBu / 9 dBu (switchable)
Intermodulation Distortion (SMPTE)
Network Control (IRIS-Net)
Yes
0.05 %
0.05 %
Optional
Optional
Slew Rate
30 V/µs
35 V/µs
Total Harmonic Distortion
0.05 %
0.05 %
109 dB
111 dB
Optional with RCM-26
Optional with RCM-26
A/D Conversion
24 Bit linear, Sigma-Delta, 128 times oversampling
Data Format
24 Bit linear A/D and D/A conversion, 48 Bit processing
Internal Processing
2 DSPs (150 MHz, 300 MIPS)
Signal-to-Noise Ratio (A-weighted)
116 dB
THD+N
< 0.005%
D/A Conversion
24 Bit, Sigma-Delta, 128 times over-sampling
Sample Rate
48 kHz
Digital Inputs
AES3 (AES/EBU) format, XLR In/Thru connectors
Sample Rate Conversion (SRC)
32 kHz - 192 kHz, internal Sample-Rate- Converter
FIR-Drive
Yes
Optional with RCM-26
Optional with RCM-26
GPIO Control Port
1 x 6-pole Euro block 2 Control Inputs 2 Control Outputs
2 Reference Outputs (+5 V, 200 mA / GND)
Optional with RCM-26
Optional with RCM-26
1000 W
1450 W
Power Consumption 1/8 max. output power
@4 Ω
100-240 V, 50-60 Hz
100-240 V, 50-60 Hz
Control Protocol
Power Supply
CAN Bus
CAN-Bus (with RCM 26 module)
CAN-Bus (with RCM 26 module)
Height X Width X Depth
3.33 in (84.7 mm) x 3.17 in (80.4 mm) x 9.06 in (230.3 mm)
3.47 in (88.1 mm) X 19 in (482.6 mm) X 20.16 in (512 mm)
Weight Net
.53 lbs (240 g)
31.31 lbs (14.2 kg)
Electronics
RCM-26
32.0 lbs (14.5 kg)
59
Precision Series Remote Control Amplifiers
Proven among critical installations and the highest profile
tours, the DSP-Controlled P-Series amplifiers combine
legendary performance with uncompromised remotecontrol and system-supervision capability with the.
P1200RL
IRIS-Net. software. Using state-of-the-art technologies
from our signal processor developments, Electro-Voice
offers amplifiers that provide superior audio performance,
guaranteed.
Precision Series DSP Remote Amplifiers
• Up to 2 x 850 W into 2 Ω
• Class-AB design
• Remote control and monitoring of all
parameters via IRIS-Net software
• Full input and output DSP processing with
RCM-24 DSP and control module
• Two GPI and two GPO ports
Electronics
P1200RT
• One-button system check allows a complete
diagnostic test of all connected cables and
loudspeaker components in a matter of minutes
• Pilot tone detection for cable supervision
• Eight recallable DSP/configuration presets
• Parallel RJ-45 CAN bus connectors
Precision Series DSP Remote Amplifiers
• Up to 2 x 1800 W into 2 Ω
• Class-AB design
• Remote control and monitoring of all
parameters via IRIS-Net software
• Full input and output DSP processing with
RCM-24 DSP and control module
• Two GPI and two GPO ports
60
• One-button system check allows a complete
diagnostic test of all connected cables and
loudspeaker components in a matter of minutes
• Pilot tone detection for cable supervision
• Eight recallable DSP/configuration presets
• Parallel RJ-45 CAN bus connectors
Precision Series DSP Remote Amplifiers
• Up to 2 x 590 W into 70/100 V line
• Class-AB design
• Remote control and monitoring of all
parameters via IRIS-Net software
• Full input and output DSP processing with
RCM-24 DSP and control module
• Two GPI and two GPO ports
P3000RL
Live for Sound
• One-button system check allows a complete
diagnostic test of all connected cables and
loudspeaker components in a matter of minutes
• Pilot tone detection for cable supervision
• Eight recallable DSP/configuration presets
• Parallel RJ-45 CAN bus connectors
Precision Series Remote Control Amplifiers
P3000 RL
P1200 RT
8Ω
4Ω
2Ω
8Ω
4Ω
2Ω
100V
70 V
Continous Output Power
(1 kHz, THD 1%)
380 W
600 W
850 W
850 W
1300 W
1800 W
590 W
580 W
Rated Output Power
(20 Hz-20 kHz, THD <0,2%)
300 W
500 W
-
750 W
1200 W
-
500 W
500 W
Maximum Bridged Output
(1 kHz, THD 1%)
1200 w
1700 W
-
2600 W
3600 W
-
-
-
THD @ Rated Output Power
< 0.05%
<0.1%
<0.2%
<0.03%
<0.01%
<0.2%
<0.3%
<0.08%
<0.001%
<0.1%
<0.3%
Signal-to-Noise Ratio
> 105 dB
>100 dB
Frequency Response
(-1 dB)
20 Hz - 20 kHz
45 Hz - 20 kHz
Dynamic Audio Limiter
THD </= 1% (Inputsignal </= + 20 dBu
Protections
Hi-Temperature, DC, HF, Back EMF, Peak Current Limiter, Inrush Current Liminter, Power On Delay
Cooling
3(4)-stage fan, front-to-rear cooling
Input Sensivity
and Impedance
1.55 V (+6dBu), 20 kOhm, XLR Input
Maximum Input Level
8.7 V (+21 dBu)
Serial Interface
Network: CAN, 2 RJ45 (CAT-5 Cabling), RS-232 for media control systems
Control Logic In
and Outputs
2 x 0V 5V free configurable, Easy-Remote
Loudspeaker Connectors
Barrier Strip
Dimensions
(Width x Height x Depth)
483 x 132.5 x 390 mm (52” x 19” x 15.4”) ( 3 U)
Net Weight
17 kg (37.5 lbs.)
Install
DIM 30
Intermodulation (SMPTE)
Speakon NL4
Barrier Strip
30 kg (66.2 lbs.)
25 kg (55.1 lbs.)
The EV Linear Precision Series is a veryhigh-quality power amplifier design to elicit maximum
performance from any speaker system. Its ultralow
distortion and powerful amplifiers ensure that program
material will be amplified very accurately. Complete
protection is provided for high temperature, audio limiters,
power-up delay, and peak current limiters.
Precision Series Power Amplifiers
•
•
•
•
•
Classic EV flagship performance amplifier
Up to 2 x 1800 W into 2 Ω
Extremely high sonic performance and quality
Class-AB design
Dual power supply
• Three-stage front-to-rear fans
• Complete protection package
• Classic EV amplifier dynamic headroom
for real-world music and applications
• Built-in dynamic limiters
P3000
Continuous Rated Power(1 kHz, THD 1%) 2Ω
2Ω
4Ω
1800 Watts
1300 Watts
850 Watts
1200 Watts
750 Watts
3600 Watts
2600 Watts
Continuous Rated Power(20-20 kHz, THD<0,2%)
Maximum Bridged Output
DIM 30
0.01 %
Input Impedance (Balanced)
20 kΩ
Input Sensitivity
0 dBu / +6 dBu / +26 dB
Intermodulation Distortion (SMPTE)
0.01 %
Network Control (IRIS-Net)
No
Slew Rate
40 V/µs
Total Harmonic Distortion
0.05 %
Signal-to-Noise Ratio (A-weighted)
105 dB
Height
Width
Depth
11.3 in (33 mm)
19 in (482.6 mm)
15.35 in (390 mm)
Weight Net
63.93 lbs (29 kg)
Electronics
P3000
Concert
P1200 RL
Mobile Audio
Live for Sound
8Ω
61
Q Series Amplifiers MK II
As direct descendants of the legendary P3000, Q Series
amplifiers take Electro-Voice's unique amplifier design
to a new level. With Q Series efficient Class-H design,
the permanent voltage rail is designed to cover the
average music signal, rather than supplying the voltage
for maximum output power. If dynamic peaks require a
Q44
Live for Sound
higher output voltage, the voltage rail is switched to the
maximum. This process saves up to 50% of the power
consumption found in conventional amplifier designs. Q
Series combines sonic excellence all in a compact and
affordable package.
Electro-Voice Q Series Power Amplifier
• Up to 2 x 650 W into 2 Ω
• XLR pass-though input connections
• The NL4 connection on output A also
carries output B on pins +/- 2 to allow easy
connection to bi-amped loudspeakers
• Switchable LPN filter extra tonal fundamentals
and "kick" with a protective low-cut for 12" or 15"
Q66
Electro-Voice Q Series Amplifier
Electronics
• Up to 2 x 900W into 2 Ω
• XLR pass-though input connections
• The NL4 connection on output A also
carries output B on pins +/- 2 to allow easy
connection to bi-amped loudspeakers
• Switchable LPN filter extra tonal fundamentals
and "kick" with a protective low-cut for 12" or 15"
Q99
loudspeakers without additional subwoofers
Class-AB design
Three-stage front-to-rear-fans
Complete protection package
Classic EV amplifier dynamic headroom
for real-world music and applications
• Built-in dynamic limiters
•
•
•
•
Electro-Voice Q Series Power Amplifier
• Up to 2 x 1250 W into 2 Ω
• XLR pass-though input connections
• The NL4 connection on output A also
carries output B on pins +/- 2 to allow easy
connection to bi-amped loudspeakers
• Switchable LPN filter extra tonal fundamentals
and "kick" with a protective low-cut for 12" or 15"
62
loudspeakers without additional subwoofers
Class-AB design
Three-stage front-to-rear fans
Complete protection package
Classic EV amplifier dynamic headroom
for real-world music and applications
• Built-in dynamic limiters
•
•
•
•
loudspeakers without additional subwoofers
Class-H design
Three-stage front-to-rear fans
Complete protection package
Classic EV amplifier dynamic headroom
for real-world music and applications
• Built-in dynamic limiters
•
•
•
•
Q Series Amplifiers MK II
Install
Concert
Live for Sound
• Up to 2 x 1800 W into 2 Ω
• XLR pass-though input connections
• The NL4 connection on output A also
carries output B on pins +/- 2 to allow easy
connection to bi-amped loudspeakers
• Switchable LPN filter extra tonal fundamentals
and "kick" with a protective low-cut for 12" or
Q44
Mobile Audio
Electro-Voice Q Series Power Amplifier
15loudspeakers without additional subwoofers
Class-H design
Three-stage front-to-rear fans
Complete protection package
Classic EV amplifier dynamic headroom
for real-world music and applications
• Built-in dynamic limiters
•
•
•
•
Q66
Q99
Q1212
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
8 Ω
2Ω
4Ω
8Ω
650 Watts
450 Watts
270 Watts
900 Watts
600 Watts
380 Watts
1250
Watts
900 Watts
550 Watts
1800
Watts
1200
Watts
750 Watts
Continuous Output Power(20-20 kHz, THD<0,2%)
400 Watts
200 Watts
500 Watts
250 Watts
800 Watts
400 Watts
1100
Watts
550 Watts
Maximum Bridged Output
1300 W
900 W
1700
Watts
1200
Watts
2800
Watts
1800
Watts
3600
Watts
2400
Watts
Continuous Output Power(1 kHz, THD 1%)
Cooling
Front-to-Rear, 3-stage fans
DIM 30
0.05 %
Input Impedance (Balanced)
20 kΩ
Input Sensitivity
+2.2 dBu
Amplifier Gain
32 dB
Intermodulation Distortion (SMPTE)
0.1 %
Maximum Input Voltage
+21 dBu (8.69 Vrms)
Network Control (IRIS-Net)
No
Slew Rate
25 V/µs
Total Harmonic Distortion
0.03 %
Frequency Response
10 Hz - 40 kHz
+3.1 dBu
+5.1 dBu
+6.6 dBu
26 V/µs
27 V/µs
30 V/µs
Signal-to-Noise Ratio (A-weighted)
106 dB
107 dB
109 dB
110 dB
Height
Width
Depth
3.47 in (88.1 mm)
19 in (482.6 mm)
16.63 in (422.5 mm)
3.47 in (88.1 mm)
19 in (482.6 mm)
16.59 in (421.5 mm)
3.47 in (88.1 mm)
19 in (482.6 mm)
16.59 in (421.5 mm)
3.47 in (88.1 mm)
19 in (482.6 mm)
16.59 in (421.5 mm)
Weight Net
27.78 lbs (12.6 kg)
32.63 lbs (14.8 kg)
35.94 lbs (16.3 kg)
39.02 lbs (17.7 kg)
Electronics
Q1212
63
Contractor Precision Series Amplifiers
The CPS Series are high-performance amplifiers with
unmatched dynamic range capability, ensuring the most
reliable operation. Designed for the contractor, the CPS
Series feature 2-RU chassis, Phoenix-type connectors for
inputs and outputs, pre-programmable power-on delay,
easy power-on via remote contact closures, rear panel
CPS 2.4
Up to 2 x 650 W into 2 Ω
Phoenix-type input and output connections
Remote power-on/off contact
Rear-mounted attenuators
Programmable time for custom
power-on delay settings
• Module slot for optional RCM-810 card,
Electronics
attenuators, and a switchable 50 Hz high-pass filter (HPF).
Features include the same protection circuits typical of
EV amplifiers. Complete protection is provided for high
temperature, audio limiters, power-up delay, and peak
current limiters.
Contractor Precision Series Class-H Power Amplifier
•
•
•
•
•
CPS 2.6
•
•
•
•
allowing IRIS-Net control and monitoring
Switchable 50 Hz high-pass filter
Three-stage front-to-rear fans
Class-AB design
Complete protection package
Contractor Precision Series Class-H Power Amplifier
•
•
•
•
•
Up to 2 x 900 W into 2 Ω
Phoenix-type input and output connections
Remote power-on/off contact
Rear-mounted attenuators
Programmable time for custom
power-on delay settings
• Module slot for optional RCM-810 card,
CPS 2.9
•
•
•
•
allowing IRIS-Net control and monitoring
Switchable 50 Hz high-pass filter
Three-stage front-to-rear fans
Class-AB design
Complete protection package
Contractor Precision Series Class-H Power Amplifier
•
•
•
•
•
Up to 2 x 1250 W into 2 Ω
Phoenix-type input and output connections
Remote power-on/off contact
Rear-mounted attenuators
Programmable time for custom
power-on delay settings
• Module slot for optional RCM-810 card,
64
Live for Sound
•
•
•
•
allowing IRIS-Net control and monitoring
Switchable 50 Hz high-pass filter
Three-stage front-to-rear fans
Class-H design
Complete protection package
Live for Sound
CPS 2.12
Contractor Precision Series Class-H Power Amplifier
Contractor Precision Series 4-ch. Amplifier
• Four amplifier channels, each can be
run as either low or high impedance,
delivering up to 500 W per channel
• Phoenix-type input and output connections
• Remote power-on/off contact
• Rear-mounted attenuators
• Module slot for optional RCM-810 card,
allowing IRIS-Net control and monitoring
CPS 4.10
• Optional RCM-810 card allows for VLD
configuration in IRIS-Net, allowing configuration
of each output channel's power to match
any load from 2-10 Ω in 0.1 ohm steps
• 50 Hz high-pass filter when operating in Hi-Z mode
• Class-D design for optimum efficiency
• Complete protection package
Concert
Install
Contractor Precision Series 8-ch. Amplifier
• Eight amplifier channels, each can be
run as either low or high impedance,
delivering up to 500 W per channel
• Phoenix-type input and output connections
• Remote power-on/off contact
• Rear-mounted attenuators
• Module slot for optional RCM-810 card,
allowing IRIS-Net control and monitoring
CPS 4.5
• Module slot for optional RCM-810 card,
allowing IRIS-Net control and monitoring
• Switchable 50 Hz high-pass filter
• Three-stage front-to-rear fans
• Class-H design
• Complete protection package
Mobile Audio
Up to 2 x 1800 W into 2 Ω
Phoenix-type input and output connections
Remote power-on/off contact
Rear-mounted attenuators
Programmable time for custom
power-on delay settings
• Optional RCM-810 card allows for VLD
configuration in IRIS-Net, allowing configuration
of each output channel's power to match
any load from 2-10 Ω in 0.1 ohm steps
• 50 Hz high-pass filter when operating in Hi-Z mode
• Class-D design for optimum efficiency
• Complete protection package
Contractor Precision Series 4-ch. Amplifier
• Four amplifier channels, each can be
run as either low or high impedance,
delivering up to 1000 W per channel
• Phoenix-type input and output connections
• Remote power-on/off contact
• Rear-mounted attenuators
• Module slot for optional RCM-810 card,
allowing IRIS-Net control and monitoring
• Optional RCM-810 card allows for VLD
configuration in IRIS-Net, allowing configuration
of each output channel's power to match
any load from 2-10 Ω in 0.1 ohm steps
• 50 Hz high-pass filter when operating in Hi-Z mode
• Class-D design for optimum efficiency
• Complete protection package
• IRIS-Net remote control module
for CPS series amplifiers
• Complete status control and supervision for
two-, four- and eight-channel models
• Load-monitoring function
• Variable Load Drive on four- and eight-channel
CPS models for maximum rated power into
all loads ranging from 2 Ω to 10 Ω, in steps
of 0.1 ohm, controlled via IRIS-Net
Electronics
•
•
•
•
•
CPS 8.5
Contractor Precision Series Amplifiers
RCM-810
65
Contractor Precision Series Amplifiers
CPS 2.4
Continuous Output Power(1 kHz, THD 1%)
CPS 2.6
CPS 2.12
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
650 W
450 W
270 W
900 W
600 W
380 W
1250 W
900 W
550 W
1800 W
1200 W
750 W
400 W
200 W
500 W
250 W
800 W
400 W
1100 W
550 W
1300 W
900 W
1800 W
1200 W
2800 W
1800 W
3600 W
2400 W
Maximum Bridged Output
Amplifier Gain
32 dB
Analog Inputs
2, electronically balanced, Phoenix-type
CAN Bus Interface
Yes (With Optional RCM-810 Card)
Cooling
Front-to-Rear, 3-stage-fans
Crossover Type
Optional Modules
Optional Modules
Modular
Modular
DIM 30
0.05 %
0.02 %
0.05 %
0.05 %
Input Impedance (Balanced)
20 kΩ
Input Sensitivity
2.2 dBu (1.0V)
+3.1 dBu (1.11Vrms)
+5.1 dBu (1.39 Vrms)
+6.6 dBu (1.66 Vrms)
Intermodulation Distortion (SMPTE)
0.1 %
0.05 %
0.1 %
0.1 %
Maximum Input Voltage
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
+21 dBu (8.69 Vrms)
Network Control (IRIS-Net)
Optional
Optional
Optional
Optional
26 V/µs
27 V/µs
30 V/µs
32.63 lbs (14.8 kg)
35.94 lbs (16.3 kg)
39.02 lbs (17.15.43 lbs (7 kg))
Slew Rate
25 V/µs
Total Harmonic Distortion
0.03 %
Variable Load Drive (VLD)
No
Frequency Response
10 Hz - 40 kHz (±1 dB)
Height
Width
Depth
3.47 in (88.1 mm)
19 in (482.6 mm)
16.59 in (421.5 mm)
Weight Net
27.78 lbs (12.13.23 lbs (6 kg))
CPS 4.10
Continuous Rated Power(1 kHz, THD 1%)
CPS 8.5
4Ω
8Ω
2Ω
4Ω
8Ω
2Ω
4Ω
8Ω
1000 W
1000 W
500 W
500 W
500 W
250 W
500 W
500 W
250 W
900 W
450 W
450 W
225 W
450 W
225 W
2000 W
2000 W
1000 W
1000 W
1000 W
1000 W
Maximum Bridged Output
Amplifier Gain
CPS 4.5
2Ω
Continuous Rated Power(20-20 kHz,
THD<0,2%)
Electronics
CPS 2.9
2Ω
Continuous Output Power(20-20 kHz,
THD<0,2%)
66
Live for Sound
32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs
4, electronically balanced, Phoenix-type
4, electronically balanced, Phoenix-type
8, electronically balanced, Phoenix-type
CAN Bus Interface
Yes (With Optional RCM-810 Card)
Yes (With Optional RCM-810 Card)
Yes (With Optional RCM-810 Card)
Cooling
Front-to-Rear, continuously variable fans
0.02 %
0.02 %
0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55)
70V/100V
DIM 30
0.02 %
Input Impedance (Balanced)
20 kΩ
Input Sensitivity
0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55)
70V/100V
0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55)
70V/100V
Intermodulation Distortion (SMPTE)
0.05 %
0.05 %
Maximum Input Voltage
+22 (9.76 Vrms)
Network Control (IRIS-Net)
Optional
Slew Rate
28 V/µs
Optional
Optional
Total Harmonic Distortion
0.05 %
Variable Load Drive (VLD)
Yes
Frequency Response
15 Hz-30 kHz
Continuous Rated Power(1 kHz, THD 1%)
100v
1000 W
500 W
500 W
Continuous Rated Power(1 kHz, THD
1%) 70v
1000 W
500 W
500 W
Continuous Rated Power(20-20 kHz,
THD<0,2%) 100v
900 W
450 W
500 W
Continuous Rated Power(20-20 kHz,
THD<0,2%) 70v
900 W
450 W
450 W
Height
Width
Depth
3.47 in (88.1 mm)
19 in (482.6 mm)
16.59 in (421.5 mm)
Weight Net
24.47 lbs (11.1 kg)
24.47 lbs (11.1 kg)
30.8 lbs (13.9 kg)
Compact Precision
Compact Precision Series Class-H Power Amplifier
• Up to 2 x 1600 W into 2 Ω
• XLR pass-though input connections
• The NL4 connection on output A also
carries output B on pins +/- 2 to allow easy
connection to bi-amped loudspeakers
• Extremely lightweight and highly efficient
• Class-H design
CP4000S
•
•
•
•
Switch mode power supply
Three-stage front-to-rear fans
Complete protection package
Classic EV amplifier dynamic headroom
for real-world music and applications
• Built-in dynamic limiters
Compact Precision Series Class-H Power Amplifier
• Up to 2 x 2100 W into 2 Ω
• XLR pass-though input connections
• The NL4 connection on output A also
carries output B on pins +/- 2 to allow easy
connection to bi-amped loudspeakers
• Extremely lightweight and highly efficient
• Class-H design
•
•
•
•
Switch mode power supply
Three-stage front-to-rear fans
Complete protection package
Classic EV amplifier dynamic headroom
for real-world music and applications
• Built-in dynamic limiters
CP3000S
2Ω
Maximum power (1k Hz; THD <1%)
1600 W
4Ω
Electronics
CP3000S
over their average continuous rating. Features include
the same comprehensive protection circuits typical of
EV amplifiers. Complete protection is provided for high
temperature, audio limiters, power-up delay, and peak
current limiters.
Mobile Audio
The CP Series are high-performance amplifiers with
unmatched dynamic range capability, ensuring the
most reliable operation favored by users in all sound
reinforcement applications. The amplifiers' power supply
is specifically designed to deliver high peak signals, which
provide 30 percent more burst signal output headroom
Install
Concert
Live for Sound
CP4000S
8Ω
2Ω
4Ω
8Ω
2100 W
1100 W
600 W
1500 W
900 W
Rated power (20 Hz–20 kHz; THD <0.2%)
900 W
450 W
1200 W
600 W
Maximum bridged output (1,000 Hz; <1% THD)
3200 W
2200 W
4200 W
3000 W
Slew rate
35 V/µs
35 V/µs
Total harmonic distortion
<0.05%
<0.05%
Intermodulation distortion (SMPTE)
<0.02%
<0.02%
Crosstalk (at 1,000 Hz)
<-80 dB
<-80 dB
Input impedance (balanced)
20 kΩ
20 kΩ
Signal-to-noise ratio (dB A-weighted)
107 dB
108 dB
Dimensions (W x H x D)
483 x 88.1 x 368.8 mm
19” x 3.5” x 15.22”
483 x 88.1 x 384 mm
19” x 3.5” x 15.5”
Net weight
8.15 kg (17.96 lbs.)
8.70 kg (19.2 lbs)
67
Commercial Power Amplifiers
EV Commercial Power amplifiers are designed to operate
under a variety of adverse conditions without fail. Several
configurations, power levels, and features are available to
suit nearly any commercial application. Features include
many of the same comprehensive protection circuits
PA1250T
typical of EV amplifiers. Complete protection is provided
for high temperature, audio limiters, power-up delay, and
peak current limiters. Phoenix-type connectors for inputs
and outputs allow for easy rack wiring.
1x250-Watt Single Channel Power Amplifier
•
•
•
•
•
PA2250T
Live for Sound
Up to 1 x 270 W into 70/100 V lines
2RU design
Stepped rear attenuators
Selectable 50 Hz or 300 Hz high-pass filter
Phoenix-type inputs and outputs
2x250-Watt Dual Channel Power Amplifier
Electronics
• Up to 2 x 270 W into 70/100 V or 4-ohm lines
• Bridged mode provides 1 x
540 W into 8-ohm load
• 2RU design
• Stepped rear attenuators
PA2400T
•
•
•
•
•
Selectable 50 Hz or 300 Hz high-pass filter
Phoenix-type inputs and outputs
High-efficiency circuitry design
Three-stage front-to-rear fans
Complete protection package
•
•
•
•
Phoenix-type inputs and outputs
High-efficiency circuitry design
Three-stage front-to-rear fans
Complete protection package
2x400-Watt Dual Channel Power Amplifier
• Up to 2 x 430 W into 70/100 V or 4-ohm lines
• Bridged mode provides 1 x
860 W into 8-ohm load
• 2RU design
• Stepped rear attenuators
• Selectable 50 Hz or 300 Hz high-pass filter
68
• High-efficiency circuitry design
• Three-stage front-to-rear fans
• Complete protection package
Live for Sound
PA2450L
Commercial Power Amplifiers
2x450-Watt Dual Channel Power Amplifier
• High-efficiency circuitry design
• Three-stage front-to-rear fans
• Complete protection package
Concert
Up to 2 x 450 W into 4 Ω
Bridged mode provides 1 x 900 W into 8-ohm load
2RU design
Stepped rear attenuators
Selectable 50 Hz or 300 Hz high-pass filter
Phoenix-type inputs and outputs
4x150-Watt Four-Channel Power Amplifier
•
•
•
•
•
Up to 4 x 160 W into 4 Ω
Bridged mode provides 2 x 315 W into 8-ohm load
2RU design
Stepped rear attenuators
Selectable 50 Hz or 300 Hz high-pass filter
•
•
•
•
Phoenix-type inputs and outputs
High-efficiency circuitry design
Three-stage front-to-rear fans
Complete protection package
PA2450L
PA4150L
PA2400T
PA2250T
PA1250T
7100
Number of Channels
2
4
2
2
1
2
Load Impedance
8/4 Ω
8/4 Ω
8/4 Ω/100V/70V
8/4 Ω/100V/70V
100V/70V
8/4 Ω
Rated output power
(*rated load) THD<1%, 1kHz
220W/450W
100W/160W
215W/430W/430W/430W
135W/270W/270W/270W
270W/270W
100 W /145 W
Rated output power
(*rated load) THD<0.2%,
20Hz – 20kHz
200W/400W
75W/150W
200W/400W/400W/400W
125W/250W/250W/250W
250W/250W
75 W/100 W
Slew rate at 1kHz V/µs
28
16
25/25/65/46
18/18/61/41
61/41
19 V / uS
Frequency response -1dB,
ref. 1kHz
<10Hz -40kHz
<10Hz -40kHz
65Hz -40kHz/65Hz -20kHz
65Hz -40kHz/65Hz -20kHz
65Hz -20kHz
20 Hz - 20 kHz
Input impedance 20Hz – 20kHz,
>20kohm
>20kohm
>20kohm
>20kohm
>20kohm balanced
30 kOhm balanced
Input sensitivity @ rated output
power or voltage, 1kHz
0dBu (775mV)
0dBu (775mV)
0dBu (775mV)
0dBu (775mV)
0dBu (775mV)
0 dBu (775 mV)
THD @ rated output
power MBW=80kHz, 1kHz
<0.1%
<0.1%
<0.1%
<0.1%
<0.1%
< 0.1 %
< 0.1 %
IMD-SMPTE 60Hz, 7kHz
<0.1%
<0.1%
<0.1%
<0.1%
<0.1%
DIM30 3.15kHz, 15kHz
<0.1%
<0.1%
<0.1%
<0.1%
<0.1%
Crosstalk ref. 1kHz, @ 10% rated
output power
<-75dB
<-75dB
<-75dB
<-75dB
<-75dB
Dimensions (W x H x D)
483mm x 88mm x 406mm
(19”x 3.5”x16”)
483mm x 88mm x 406mm
(19”x 3.5”x16”)
483mm x 88mm x 406mm
(19”x 3.5”x16”)
483mm x 88mm x 406mm
(19”x 3.5”x16”)
483mm x 88mm x 406mm
(19”x 3.5”x16”)
483 x 44.4 x 304 mm
(19" x 1.75" x 12")
Weight
16.5kg (36.34lbs)
18kg(39.65lbs)
26kg(57.27lbs)
23.5kg(51.76lbs )
16.5kg(36.34lbs)
8.16 kg (18.2 lb)
Electronics
PA4150L
Mobile Audio
Install
•
•
•
•
•
•
69
NetMax Digital Matrix System
The EV NetMax N8000 is an all-purpose digital audio
system controller with outstanding performance features.
NetMax is highly flexible due to the modular hardware
design, which renders many other applications possible.
Four slots with 8- channel audio modules at the rear of the
Live for Sound
device offer up to 32 local audio channels. Each slot can
be equipped either with an audio input module or an audio
output module. The modular signal processing in the N8000
is implemented on powerful audio signal processors.
N8000-1500 NetMax 1500 MIPS Digital Matrix Controller
• 1500 MIPS internal processing
• Up to 1900 MIPS of processing
power available per unit
• Cobranet and Dante audio networking options
• Supports Ethernet, RS-232, USB and
CAN Communications Protocols
N8000
NetMax 300 MIPS Digital Matrix Controller
Electronics
•
•
•
•
•
Full IRIS-Net software support
32-channel digital matrix bus
114 dB dynamic range
Cobranet and Dante audio networking options
Supports Ethernet, RS-232, USB and
CAN communications protocols
• Up to 1000 MIPS of processing
AI-1
Eight line-level inputs on Euroblock connectors
Electronically balanced inputs
20 kΩ input impedance
117 dB dynamic range provides superior sonic quality
• Automatic configuration-Indication of
installation and removal in IRIS-Net
• DSP (100 MIPS) on board
NetMax Analog Mic/Line Input Card
•
•
•
•
•
70
power available per unit
• Extensive range of DSP functions
• Modular hardware chassis
• Integrated supervision, scheduling
and auto-compiling DSP
• Fully-programmable analog and digital GPIO support
NetMax Analog Input Card
•
•
•
•
MI-1
• Extensive range of DSP functions
• Modular hardware chassis
• Integrated supervision, scheduling
and auto-compiling DSP
• Fully-programmable analog and digital GPIO support
Eight mic/line-level inputs on Euroblock connectors
Electronically balanced inputs
Selectable mic/line pad via IRIS-Net
48 V phantom power
Gain and level adjustable via IRIS-Net
• Automatic configuration-Indication of
installation and removal in IRIS-Net
• DSP (100 MIPS) on board
NetMax Digital Matrix System
Live for Sound
TPI-8/TPI-12 Touch Panel Interfaces
• Up to three front units in a wallstation – easy daisy
chaining of any combination PWS 4/6 modules
using included connection wire
• Easy labeling of buttons – label field protected
by a transparent cover
• Configuration via IRIS-Net – Buttons and LEDs
can be used for various functions
• Customizable button behavior- Buttons can be
configured as momentary, latching, or radio groups,
and all have status LEDs to indicate current state.
• Custom design of the control surface –
individual configuration via IRIS-Net™,
functionality and graphical representation
for all kinds of applications.
• Long life span and noiseless operation
– no fan, no hard disk.
• Reliable server technology –
Win XP Embedded™ operating system,
industry approved product quality.
Concert
PWS-4, 6, C Programmable Wall Stations
Gigabit primary and secondary Ethernet interfaces
Typical latency: 1 mS
Dante Zen device discovery
Compatible with Dante Virtual Soundcard
NetMax 8 Channel Digital Input Card
• Four inputs for eight channels of AES/
EBU or S/PDIF digital audio input
• Euroblock or TOSLINK optical input connectors
• Accepts sample rates of 32-192 kHz
• Independent sample rate converters allow inputs
of different sample rates on each DI-1 input
• Lock indication LED
• DSP (100 MIPS) on board
CM-1
DO-1 NetMax 8 Channel Digital Output Card
DSP-1
• Four outputs for eight channels of
AES/EBU digital audio output
• 48 kHz sampling rate
• +21 dBu maximum output level
• Automatic configuration-Indication of
installation and removal in IRIS-Net
• DSP (100 MIPS) on board
NetMax CobraNet Audio Network Module
• 100BASE-TX ethernet interface; 100Mbit/s fullduplex Ethernet interface; IEEE 802.3u compatible.
• Secondary 100BASE-TX Ethernet interface.
Second Ethernet interface for the connection of
a redundant network to establish fault tolerant
systems. Internal audio output interface for the
transmission of 32 digital audio channels with 48
kHz sample rate and 16, 20, or 24-bit word length
Mobile Audio
DI-1
Eight line-level outputs on Euroblock connectors
Electronically balanced outputs
100Ω output impedance
118 dB dynamic range provides
superior sonic quality
• Automatic configuration-Indication of
installation and removal in IRIS-Net
• DSP (100 MIPS) on board
• Internal audio input interface for receiving 32
digital audio channels with 48 kHz sample
rate and 16, 20, or 24-bit word length.
• Control, monitoring, configuration, and
firmware updates via Ethernet protocol.
• Status LEDs. Link, activity, fault, and CobraNet
conductor status indication via Ethernet connectors.
Electronics
•
•
•
•
•
•
•
•
Install
DM-1 NetMax Dante Audio Network Module AO-1 NetMax 8 Channel Analog Output Card
N8000 Microprocesssor Expansion Module
• 300 MIPS computing capacity - doubles the
DSP power of a NetMax System Controller
• Two RAM banks (512k x 24 Bit) - allow for
additional delay lines up to 21.8 seconds
• 48-bit signal processing.
• Double precision DSP algorithms.
• Automatic configuration - signals whether
a new module has been inserted,
or if one has been removed.
71
Signal Processors
Proven in thousands of installations and live applications
around the world including the Olympics, the FIFA World
Cup, Live 8, and Live Earth, EV delivers truly state-ofthe-art DSP for today's applications. EV's flagship digital
sound system processor, the Dx46, sets the standard for
Dx46
Live for Sound
digital loudspeaker controllers and processors, providing
48-bit filter algorithms, 24-bit AD/DA conversion, and a
dynamic range of 115 dB. The EV DC-One is a two-in, sixout digital signal processor for loudspeaker management
and optimization.
FIR Drive Sound System Processor
2x6 FIR-Drive Loudspeaker Processor
Analog and AES/EBU Inputs
Full IRIS-Net Control and Configuration
Ethernet and USB Data Interfaces
Full Loudspeaker Protection Package,
Including PA Limiters and TEMP Limiters
• Dedicated Array EQ and Delay Sections
For Advanced Applications
Electronics
•
•
•
•
•
72
DC-One
• -6 dB Switchable Analog Pad Inserted
Before A/D Converters On Inputs
• 4 Separate Delay Sections
• 5 Contact Closure Inputs
• 60 Factory Presets
• 30 User Presets
• Unique Edit/Compare mode for
audible parameter adjustment
Two-In-Six-Out Loudspeaker Processor
• USB connection for DC-One Editor Software Control
• Analog or AES/EBU Inputs
• 6 dB analog pad placed before A/D
converter for system protection
• Highly customizeable security settings
• Contact closure interface for remote Preset recall
• 20 User Presets
• 60 Factory Presets
• Unique Edit/Compare Mode for comparing
edited Presets and settings
• 6 predefined Operation Configurations,
including Free Edit
Signal Processors
Live for Sound
DC-One PC Control Software
• State-of-the-art graphics provide a highly detailed,
easy to use over view of a complete system
• Intuitive navigation and block diagrams
provide easy access to all DC-One
functions and DSP sections
• Easy connection to DC-One hardware via USB
Analog Inputs
Dx46
DC-One
2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced)
2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced)
Analog Outputs
6 XLR (Electronically Balanced)
6 XLR (Electronically Balanced)
Digital Inputs
1 XLR AES/EBU (2 Ch)
1 XLR AES/EBU (2 Ch)
8.7 V / +21 dBu (Without -6 dB Analog Pad Engaged)
Maximum Input Voltage
8.7 V / +21 dBu (Without -6 dB Analog Pad Engaged)
Nominal Input Voltage
1.55V/+ 6 dBu
1.23 V / +4 dBu
Input Impedance (Balanced)
10 kΩ
10 kΩ
8.7 V / +21 dBu
Maximum Output Voltage
8.7 V / +21 dBu
Nominal Output Voltage
1.55 V (+6 dBu)
1.23 V / +4 dBu
Output Impedance (Balanced)
50 Ω
50 Ω
Frequency Response
20 Hz - 40 kHz
10 Hz - 22 kHz (±0.5 dB)
Dynamic Range
116 dB (A-weighted)
111 dB (unweighted, band limited 22 Hz - 22 kHz)
< 0.01% (band limited 22 Hz - 22 kHz)
THD+N
<0,002% (band limited 20 Hz to 20 kHz)
A/D Conversion
24-Bit Delta Sigma
24-bit/sigma-delta (linear phase) 128 times oversampling
D/A Conversion
24-Bit Delta Sigma
24-bit/sigma-delta 128 times oversampling
Data Format
24-Bit
24-Bit
Internal Processing
48-Bit Double Precision
32-Bit Floating Point
48 kHz
Sample Rate
48 kHz
Control Protocol
USB, Ethernet
Front Panel USB Connector
Height X Width X Depth
1.74 in (44.25 mm) X 19 in (482.6 mm) X 14 in (355.6 mm)
1.75 in (44.45 mm) X 19 in (482.6 mm) X 14 in (355.6 mm)
Weight Net
10.14 lbs (4.6 kg)
10.14 lbs (4.6 kg)
Electronics
Mobile Audio
Install
• PC editor for DC-One configuration
• Provides detailed, real-time control and
monitoring of DC-One hardware
• Unique security and lock-out functions
are available and highly customizable
through the DC-One editor software
Concert
DC-One Editor Software
73
74
Mobile Audio
Concert
75
Mobile Audio
Concert
Concert
Install
Mobile Audio
Commercial
Bosch Communications Systems
©2010 Bosch Security Systems, Inc. LIT000473000
Americas
Headquarters Americas
Bosch Security Systems, Inc.
12000 Portland Ave South,
Burnsville, MN 55337, USA
USA–Ph: 1 800 392 3497
Fax: 1 800 955 6831
Canada–Ph: 1 866 505 5551
Fax: 1 866 336 8467
Latin America–Ph: 1 952 887 5532
Fax: 1 952 736 4212
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement