User manual | swing gate operators

ate OPERATORS
VEHICULAR AC & DC
SWING GATE
OPERATORS
Safety and Reliability Systems
Jam nut
CLUTCH
PLATE
Clutch
pad
gear
Clutch
pad
CLUTCH
PLATE
DKS Fail-safe:
1. Gate is obstructed.
2. Pressure builds on drive train.
3. C
lutch pads allow gear to slip,
releasing pressure on the gear
drive and gate.
4. E
lectronic RPM sensor
activates and reverses gate.
gear
drive
Electronic
RPM sensor
Low Visibility Gate Operators
DKS takes safety a few steps further:
All DoorKing swing gate operators are compliant
with the U.L. 325 standard for safety. DKS gate
operators will provide a safe operating environment
when installed correctly with the required
entrapment protection devices.
DC Swing Gate Operator
Battery Back-up and Solar Power
The newest DKS DC Swing Gate Operator is perfect where backup
power is critical, as they keep running when AC power has been
lost. The solar power version is ideal in applications where AC
power is unavailable and allows you to add your own solar system
for power, or you can choose the DKS solar kit.
This swing gate operator offers convenience, reliability and safe
operation in a small, compact design and is ideally suited
for residential or commercial applications.
DoorKing Northwest
Northwest Region Sales Office
Vancouver, WA
DoorKing North
Northern Region Sales Office
Brownsburg, IN
DoorKing West
Western Region Sales Office
Cameron Park, CA
DoorKing East
Eastern Region Sales Office
Vineland, NJ
DoorKing Northeast
Northeast Region Sales Office
Natick, MA
DoorKing Southwest
Southwest Region Sales Office
Tempe, AZ
DoorKing Mid-West
Mid-West Region Sales Office
Fulton, MO
Low visibility gate operators for
a cleaner looking install
DoorKing South
Southern Region Sales Office
Woodstock, GA
The unique design of the 6000 series operators allows the gate
arm to be attached to the bottom rail of the gate. This eliminates
the need for any brackets to be welded to the face of the gate and
creates an aesthetically pleasing installation.
Distributed by:
DoorKing Central
Central Region Sales Office
Watauga, TX
This is excellent for home gates as it allows for a more
aesthetically pleasing attachment to the gate while still delivering
reliable, safe operation.
DoorKing Southeast
Southeast Region Sales Office
Maitland, FL
And they can be either pad or post mounted without costly and
time consuming field modifications.
Whole System Emergency Power Backup
Reliability You Can Trust
The Model 1000 power inverter provides backup
power for a complete gated access control
system (phone system, controller, accessories,
keypads, etc.) when primary AC power fails by
converting 12 volt DC power to 120 volt AC power.
This capability maintains a completely operable
access control system during power outages
and brown outs and is ideal for residential and
commercial applications with a single gate system.
The 6500 series has a solid steel frame and belt driven gear box
making this operator one of the quietest on the market today.
The electronic magnetic limits will
never wear out or break and they are
easily adjusted. Unique breakaway
hub design prevents gear box
damage if the gate is struck. Twopiece Polyurethane housing makes
installation and adjustments easy.
DoorKing South Central
South Central Region Sales Office
Flowood, MS
DoorKing Central Atlantic Coast
Mid Atlantic Region Sales Office
Matthews, NC
DoorKing South Texas
South East Texas Region Sales Office
Houston, TX
Residential • Apartment/College Residence Halls • Gated Communities
Mixed Use Buildings • Commercial/Industrial • Parking • Self Storage
AC & DC POWERED Gate OPERATORS
GATE
OPERATORS
Safety and Reliability Systems
Jam nut
CLUTCH
PLATE
Clutch
pad
gear
Clutch
pad
CLUTCH
PLATE
DKS Fail-safe:
VEHICULAR AC & DC
SWING GATE
OPERATORS
1. Gate is obstructed.
2. Pressure builds on drive train.
3. C
lutch pads allow gear to slip,
releasing pressure on the gear
drive and gate.
4. E
lectronic RPM sensor
activates and reverses gate.
gear
drive
Electronic
RPM sensor
Low Visibility Gate Operators
DKS takes safety a few steps further:
All DoorKing swing gate operators are compliant
with the U.L. 325 standard for safety. DKS gate
operators will provide a safe operating environment
when installed correctly with the required
entrapment protection devices.
DC Swing Gate Operator
Battery Back-up and Solar Power
The newest DKS DC Swing Gate Operator is perfect where backup
power is critical, as they keep running when AC power has been
lost. The solar power version is ideal in applications where AC
power is unavailable and allows you to add your own solar system
for power, or you can choose the DKS solar kit.
This swing gate operator offers convenience, reliability and safe
operation in a small, compact design and is ideally suited
for residential or commercial applications.
Low visibility gate operators for
a cleaner looking install
Distributed by:
The unique design of the 6000 series operators allows the gate
arm to be attached to the bottom rail of the gate. This eliminates
the need for any brackets to be welded to the face of the gate and
creates an aesthetically pleasing installation.
This is excellent for home gates as it allows for a more
aesthetically pleasing attachment to the gate while still delivering
reliable, safe operation.
And they can be either pad or post mounted without costly and
time consuming field modifications.
Whole System Emergency Power Backup
Reliability You Can Trust
The Model 1000 power inverter provides backup
power for a complete gated access control
system (phone system, controller, accessories,
keypads, etc.) when primary AC power fails by
converting 12 volt DC power to 120 volt AC power.
This capability maintains a completely operable
access control system during power outages
and brown outs and is ideal for residential and
commercial applications with a single gate system.
The 6500 series has a solid steel frame and belt driven gear box
making this operator one of the quietest on the market today.
The electronic magnetic limits will
never wear out or break and they are
easily adjusted. Unique breakaway
hub design prevents gear box
damage if the gate is struck. Twopiece Polyurethane housing makes
installation and adjustments easy.
120 Glasgow Avenue, Inglewood, California 90301 U.S.A.
[email protected] • Tel: 310-645-0023 FAX: 310-641-1586 www.doorking.com
© 2016 All Rights Reserved. Product specifications may change without notice. Rev. 11/16
Residential • Apartment/College Residence Halls • Gated Communities
Mixed Use Buildings • Commercial/Industrial • Parking • Self Storage
6000 Series
For gates up to 22 ft (6.7m) /
800 lbs (362kg)
SMOOTH OPERATION
6500 Series
6524 DC
For gates up to 25 ft (7.6m) /
2000 lbs (907kg)
RELIABILITY
LONG LASTING
6500 / 6550 models:
6524 Models:
Three models to choose from:
6050 and 6100 at 1/2 horsepower,
and 6300 at 1/2 and 1 horsepower.
Two 6500 models to choose from: 1/2 and 1
horsepower. 6550 available as 1 horsepower only.
Operator is 24 Volt DC and includes built-in
battery backup.
Split polyurethane housing allows easy access
without having to remove the gate arm!
115/230 VAC (switch selectable) or 24 VDC
Solar Power.
Safety – built-in mechanical and
electronic reverse system.
Easy to adjust electronic magnetic limits
eliminate old style mechanical switches that
can wear out, break or fail.
1/2 HP Quadra Drive Heavy-duty DC motor.
G90 galvanized steel frame to
prevent rusting.
Unique breakaway hub design prevents gear box
damage if the gate is struck.
Pad or Post Mount.
Steel frame for strength and durability.
•T
wo-stage, self monitoring
inherent protection system
•C
an be installed directly on a
concrete pad, or post mounted to
meet any installation requirements
(6000 series).
Key Features
•E
mergency friendly
Fail-safe design
•6
500 model operators are
mounted to a concrete
mounting pad
Mechanical
Electrical
• Primary Reduction is provided by a pulley / belt driving a
worm gear reduction system
• Microprocessor control board
• Quiet operation and weather proof design
• Rotates the gate 90° in approximately:
6050 / 6100: 12-14 seconds
6300: 16-18 seconds
6500: 14-16 seconds
6524: 12-14 seconds
6550: 12-18 seconds (variable)
• Two-piece articulating arm for smooth gate operation.
• Keyed access is provided to release arm for manual gate
operation in the event of a power outage
• Overlap feature for bi-parting dual gates
• Auto-close timer (1-23 seconds)
• Simple connection for secondary operator in bi-parting
gate systems
• Built-in power and alarm reset switches
• Selectable shadow / reverse loop function
• Magnetic lock power
• Ports for plug-in open and reverse loop detectors.
DKS plug-in detectors only
• 115 VAC convenience outlets for accessory transformers
(on the AC powered version of 6524 only)
• Gate Tracker reporting output provides operator data to
access control system (DKS 1833, 1835, 1837 or 1838 only)
* 6524 battery back up cycles assumes gate swings in a level arc, and is in good condition with properly adjusted hardware. Calculation based on a 16 foot gate weighing 800 Lbs.
Other external factors (temperature, charge state of batteries, gate weight, gate length, etc.) will affect the performance of the gate operator and may reduce the number of cycles
3. o slamming when
N
gate closes
4. Gate
Tracker™
5. Split
Case
•P
rovides operator data to
companion access controller
(DKS 1833, 1835, 1837, 1838).
•T
wo-piece split
case provides easy
installation and
maintenance.
800 LB
(362kg)
Soft Start/Stop (Mechanical) 3
3
3
Loop Detector Ports 3
3
3
Gate Tracker 3
3
3
Usage
Model 6524
Com
Gate Maximums
Ind
Electrical
Length
Weight
HP
Fail-safe
Clutch
10 Ft. (3.0m)
400 Lb. (181kg)
1/2
ü
6050
ü
6100
ü
ü
14 Ft. (4.2m)
500 Lb. (226kg)
1/2
ü
6100
ü
ü
14 Ft. (4.2m)
400 Lb. (181kg)
1/2
ü
6300
ü
ü
ü
18 Ft. (5.4m)
700 Lb. (317kg)
1/2
ü
6300
ü
ü
ü
18 Ft. (5.4m)
600 Lb. (272kg)
1/2
ü
6300
ü
ü
ü
22 Ft. (6.7m)
800 Lb. (362kg)
1
ü
6300
ü
ü
ü
22 Ft. (6.7m)
700 Lb. (317kg)
1
ü
6500
ü
ü
ü
18 Ft. (5.4m)
700 Lb. (317kg)
1/2
-
6500
ü
ü
ü
18 Ft. (5.4m)
600 Lb. (272kg)
1/2
-
6500
ü
ü
ü
22 Ft. (6.7m)
800 Lb. (362kg)
1
-
6500
ü
ü
ü
22 Ft. (6.7m)
700 Lb. (317kg)
1
-
6550
ü
ü
ü
25 Ft. (7.6m)
2000 Lb. (907kg)
1
-
6524
ü
ü
16 Ft. (4.8m)
800 Lb. (362kg)
1/2
-
•N
ever pull arm off to
access interior.
Accessories
2. Mounting
•6
000 series operators
automatically release
pressure on gate
With back-up power, up to 150 gate cycles
with optional 18Ah batteries.*
Model 6550
2000 LB
(907kg)
Res
Includes set of 7.2 Ah batteries. Solar kit
includes set
of 18Ah batteries and 10 Watt, 24 VDC
solar panel.
Model 6500
800 LB
(362kg)
Model
Solar power ready with 0.0 Amp SBPD
Circuit (solar power only).
Easy to use manual release system.
1. Safety
Gate Weight Maximum AND SOLAR POWER
6050, 6100, 6300 Models:
Model 6300
Pad Mount
Gate Length Maximum 22 ft (6.7m) 25 ft (7.6m) 16 ft (4.8m)
AC / DC
QUIET OPERATION
Automatic self-setting limits mean no
limit switch adjustments – ever.
6000 Series 6500/6550 6524 DC
BATTERY BACK-UP
STRENGTH
SAFETY
For gates up to 16 ft (4.8m) /
800 lbs (362kg)
ENTRAPMENT PREVENTION DEVICES
Uphill Counter-balance &
Ball Joint Pivot Assemblies
Photo-eyes
Torsion rod assembly counter-balances uphill
gates. Kit includes top bracket, bottom bracket
and torsion rod - with the ability to add up to
5 additional torsion rods for heavier gates.
Helps to prevent gate runaway. Pivot assembly
used to connect operator arm when the operator
has been installed horizontally level and the gate
opens on an uphill or downhill slope.
• P
hoto-reflective beams
have a scan distance
up to 45 ft. (14m)
• Includes reflector and
mounting bracket
•T
hru-beam photocells
have a scan distance
up to 100 ft. (30.48m)
• S
eparate sender
and receiver
Reversing edges
•A variety of edge styles for different gates
• Hooded metal enclosure
• Mounting channels included
• Infrared beam
• 2-wire edges can be hard wired
• Wireless connection also available
Loop Detectors
Plug-in detectors (DKS only) and hard wired
detectors. Single and dual channel. Pre-fabricated
loops available or form your own loops.
Lock Boxes
Provide Fire Department and Postal Carrier
access through automated gates or doors for
emergency or postal personnel.
Swing Gate
Accessories
Flange bearing hinge, sealed bearing
hinge, base plates, bi-parting
connection cable, heater kits, gate
test scales, grease, accessory
transformers, and other accessories
for gate operation and installation.
6000 Series
For gates up to 22 ft (6.7m) /
800 lbs (362kg)
SMOOTH OPERATION
6524 DC
For gates up to 25 ft (7.6m) /
2000 lbs (907kg)
RELIABILITY
LONG LASTING
6000 Series 6500/6550 6524 DC
BATTERY BACK-UP
STRENGTH
SAFETY
or gates up to 16 ft (4.8m) /
800 lbs (362kg)
Gate Length Maximum 22 ft (6.7m) 25 ft (7.6m) 16 ft (4.8m)
AC / DC
QUIET OPERATION
Gate Weight Maximum AND SOLAR POWER
m
800 LB
(362kg)
2000 LB
(907kg)
800 LB
(362kg)
Soft Start/Stop (Mechanical) 3
3
3
Loop Detector Ports 3
3
3
Gate Tracker 3
3
3
6524 Models:
Operator is 24 Volt DC and includes built-in
battery backup.
Model
115/230 VAC (switch selectable) or 24 VDC
Solar Power.
Res
1/2 HP Quadra Drive Heavy-duty DC motor.
Solar power ready with 0.0 Amp SBPD
Circuit (solar power only).
Includes set of 7.2 Ah batteries. Solar kit
includes set
of 18Ah batteries and 10 Watt, 24 VDC
solar panel.
Model 6500
Model 6300
Pad Mount
Model 6550
2. Mounting
•T
wo-stage, self monitoring
inherent protection system
•C
an be installed directly on a
concrete pad, or post mounted to
meet any installation requirements
(6000 series).
Key Features
•E
mergency friendly
Fail-safe design
•6
500 model operators are
mounted to a concrete
mounting pad
Mechanical
Electrical
• Primary Reduction is provided by a pulley / belt driving a
worm gear reduction system
• Microprocessor control board
• Quiet operation and weather proof design
• Rotates the gate 90° in approximately:
6050 / 6100: 12-14 seconds
6300: 16-18 seconds
6500: 14-16 seconds
6524: 12-14 seconds
6550: 12-18 seconds (variable)
• Two-piece articulating arm for smooth gate operation.
• Keyed access is provided to release arm for manual gate
operation in the event of a power outage
• Overlap feature for bi-parting dual gates
• Auto-close timer (1-23 seconds)
• Simple connection for secondary operator in bi-parting
gate systems
• Built-in power and alarm reset switches
• Selectable shadow / reverse loop function
• Magnetic lock power
• Ports for plug-in open and reverse loop detectors.
DKS plug-in detectors only
• 115 VAC convenience outlets for accessory transformers
(on the AC powered version of 6524 only)
• Gate Tracker reporting output provides operator data to
access control system (DKS 1833, 1835, 1837 or 1838 only)
* 6524 battery back up cycles assumes gate swings in a level arc, and is in good condition with properly adjusted hardware. Calculation based on a 16 foot gate weighing 800 Lbs.
Other external factors (temperature, charge state of batteries, gate weight, gate length, etc.) will affect the performance of the gate operator and may reduce the number of cycles
3. Smooth
Operation
4. Gate
Tracker™
5. Split
Case
• Slow start / slow stop.
•P
rovides operator data to
companion access controller
(DKS 1833, 1835, 1837, 1838).
•T
wo-piece split
case provides easy
installation and
maintenance.
•N
o slamming when
gate closes
Model 6524
Com
Gate Maximums
Ind
Electrical
Length
Weight
HP
Fail-safe
Clutch
10 Ft. (3.0m)
400 Lb. (181kg)
1/2
ü
6050
ü
6100
ü
ü
14 Ft. (4.2m)
500 Lb. (226kg)
1/2
ü
6100
ü
ü
14 Ft. (4.2m)
400 Lb. (181kg)
1/2
ü
6300
ü
ü
ü
18 Ft. (5.4m)
700 Lb. (317kg)
1/2
ü
6300
ü
ü
ü
18 Ft. (5.4m)
600 Lb. (272kg)
1/2
ü
6300
ü
ü
ü
22 Ft. (6.7m)
800 Lb. (362kg)
1
ü
6300
ü
ü
ü
22 Ft. (6.7m)
700 Lb. (317kg)
1
ü
6500
ü
ü
ü
18 Ft. (5.4m)
700 Lb. (317kg)
1/2
-
6500
ü
ü
ü
18 Ft. (5.4m)
600 Lb. (272kg)
1/2
-
6500
ü
ü
ü
22 Ft. (6.7m)
800 Lb. (362kg)
1
-
6500
ü
ü
ü
22 Ft. (6.7m)
700 Lb. (317kg)
1
-
6550
ü
ü
ü
25 Ft. (7.6m)
2000 Lb. (907kg)
1
-
6524
ü
ü
16 Ft. (4.8m)
800 Lb. (362kg)
1/2
-
•N
ever pull arm off to
access interior.
Accessories
1. Safety
•6
000 series operators
automatically release
pressure on gate
With back-up power, up to 150 gate cycles
with optional 18Ah batteries.*
Usage
ENTRAPMENT PREVENTION DEVICES
Lock Boxes
Photo-eyes
Provide Fire Department and Postal Carrier
access through automated gates or doors for
emergency or postal personnel.
• P
hoto-reflective beams
have a scan distance
up to 45 ft. (14m)
• Includes reflector and
mounting bracket
•T
hru-beam photocells
have a scan distance
up to 100 ft. (30.48m)
• S
eparate sender
and receiver
Reversing edges
•A variety of edge styles for different gates
• Hooded metal enclosure
• Mounting channels included
• Infrared beam
• 2-wire edges can be hard wired
• Wireless connection also available
Loop Detectors
Plug-in detectors (DKS only) and hard wired
detectors. Single and dual channel. Pre-fabricated
loops available or form your own loops.
6000 Series
For gates up to 22 ft (6.7m) /
800 lbs (362kg)
SMOOTH OPERATION
6500 Series
6524 DC
For gates up to 25 ft (7.6m) /
2000 lbs (907kg)
RELIABILITY
LONG LASTING
6500 / 6550 models:
6524 Models:
Three models to choose from:
6050 and 6100 at 1/2 horsepower,
and 6300 at 1/2 and 1 horsepower.
Two 6500 models to choose from: 1/2 and 1
horsepower. 6550 available as 1 horsepower only.
Operator is 24 Volt DC and includes built-in
battery backup.
Split polyurethane housing allows easy access
without having to remove the gate arm!
115/230 VAC (switch selectable) or 24 VDC
Solar Power.
Safety – built-in mechanical and
electronic reverse system.
Easy to adjust electronic magnetic limits
eliminate old style mechanical switches that
can wear out, break or fail.
1/2 HP Quadra Drive Heavy-duty DC motor.
G90 galvanized steel frame to
prevent rusting.
Unique breakaway hub design prevents gear box
damage if the gate is struck.
Pad or Post Mount.
Steel frame for strength and durability.
•T
wo-stage, self monitoring
inherent protection system
•C
an be installed directly on a
concrete pad, or post mounted to
meet any installation requirements
(6000 series).
Key Features
•E
mergency friendly
Fail-safe design
•6
500 model operators are
mounted to a concrete
mounting pad
Mechanical
Electrical
• Primary Reduction is provided by a pulley / belt driving a
worm gear reduction system
• Microprocessor control board
• Quiet operation and weather proof design
• Rotates the gate 90° in approximately:
6050 / 6100: 12-14 seconds
6300: 16-18 seconds
6500: 14-16 seconds
6524: 12-14 seconds
6550: 12-18 seconds (variable)
• Two-piece articulating arm for smooth gate operation.
• Keyed access is provided to release arm for manual gate
operation in the event of a power outage
• Overlap feature for bi-parting dual gates
• Auto-close timer (1-23 seconds)
• Simple connection for secondary operator in bi-parting
gate systems
• Built-in power and alarm reset switches
• Selectable shadow / reverse loop function
• Magnetic lock power
• Ports for plug-in open and reverse loop detectors.
DKS plug-in detectors only
• 115 VAC convenience outlets for accessory transformers
(on the AC powered version of 6524 only)
• Gate Tracker reporting output provides operator data to
access control system (DKS 1833, 1835, 1837 or 1838 only)
* 6524 battery back up cycles assumes gate swings in a level arc, and is in good condition with properly adjusted hardware. Calculation based on a 16 foot gate weighing 800 Lbs.
Other external factors (temperature, charge state of batteries, gate weight, gate length, etc.) will affect the performance of the gate operator and may reduce the number of cycles
3. Smooth
Operation
4. Gate
Tracker™
5. Split
Case
• Slow start / slow stop.
•P
rovides operator data to
companion access controller
(DKS 1833, 1835, 1837, 1838).
•T
wo-piece split
case provides easy
installation and
maintenance.
•N
o slamming when
gate closes
800 LB
(362kg)
Soft Start/Stop (Mechanical) 3
3
3
Loop Detector Ports 3
3
3
Gate Tracker 3
3
3
Usage
Model 6524
Com
Gate Maximums
Ind
Electrical
Length
Weight
HP
Fail-safe
Clutch
10 Ft. (3.0m)
400 Lb. (181kg)
1/2
ü
6050
ü
6100
ü
ü
14 Ft. (4.2m)
500 Lb. (226kg)
1/2
ü
6100
ü
ü
14 Ft. (4.2m)
400 Lb. (181kg)
1/2
ü
6300
ü
ü
ü
18 Ft. (5.4m)
700 Lb. (317kg)
1/2
ü
6300
ü
ü
ü
18 Ft. (5.4m)
600 Lb. (272kg)
1/2
ü
6300
ü
ü
ü
22 Ft. (6.7m)
800 Lb. (362kg)
1
ü
6300
ü
ü
ü
22 Ft. (6.7m)
700 Lb. (317kg)
1
ü
6500
ü
ü
ü
18 Ft. (5.4m)
700 Lb. (317kg)
1/2
-
6500
ü
ü
ü
18 Ft. (5.4m)
600 Lb. (272kg)
1/2
-
6500
ü
ü
ü
22 Ft. (6.7m)
800 Lb. (362kg)
1
-
6500
ü
ü
ü
22 Ft. (6.7m)
700 Lb. (317kg)
1
-
6550
ü
ü
ü
25 Ft. (7.6m)
2000 Lb. (907kg)
1
-
6524
ü
ü
16 Ft. (4.8m)
800 Lb. (362kg)
1/2
-
•N
ever pull arm off to
access interior.
Accessories
2. Mounting
•6
000 series operators
automatically release
pressure on gate
With back-up power, up to 150 gate cycles
with optional 18Ah batteries.*
Model 6550
2000 LB
(907kg)
Res
Includes set of 7.2 Ah batteries. Solar kit
includes set
of 18Ah batteries and 10 Watt, 24 VDC
solar panel.
Model 6500
800 LB
(362kg)
Model
Solar power ready with 0.0 Amp SBPD
Circuit (solar power only).
Easy to use manual release system.
1. Safety
Gate Weight Maximum AND SOLAR POWER
6050, 6100, 6300 Models:
Model 6300
Pad Mount
Gate Length Maximum 22 ft (6.7m) 25 ft (7.6m) 16 ft (4.8m)
AC / DC
QUIET OPERATION
Automatic self-setting limits mean no
limit switch adjustments – ever.
6000 Series 6500/6550 6524 DC
BATTERY BACK-UP
STRENGTH
SAFETY
For gates up to 16 ft (4.8m) /
800 lbs (362kg)
ENTRAPMENT PREVENTION DEVICES
Uphill Counter-balance &
Ball Joint Pivot Assemblies
Photo-eyes
Torsion rod assembly counter-balances uphill
gates. Kit includes top bracket, bottom bracket
and torsion rod - with the ability to add up to
5 additional torsion rods for heavier gates.
Helps to prevent gate runaway. Pivot assembly
used to connect operator arm when the operator
has been installed horizontally level and the gate
opens on an uphill or downhill slope.
• P
hoto-reflective beams
have a scan distance
up to 45 ft. (14m)
• Includes reflector and
mounting bracket
•T
hru-beam photocells
have a scan distance
up to 100 ft. (30.48m)
• S
eparate sender
and receiver
Reversing edges
•A variety of edge styles for different gates
• Hooded metal enclosure
• Mounting channels included
• Infrared beam
• 2-wire edges can be hard wired
• Wireless connection also available
Loop Detectors
Plug-in detectors (DKS only) and hard wired
detectors. Single and dual channel. Pre-fabricated
loops available or form your own loops.
Lock Boxes
Provide Fire Department and Postal Carrier
access through automated gates or doors for
emergency or postal personnel.
Swing Gate
Accessories
Flange bearing hinge, sealed bearing
hinge, base plates, bi-parting
connection cable, heater kits, gate
test scales, grease, accessory
transformers, and other accessories
for gate operation and installation.

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project