Samsung 2033HD, LS20CFVKFEN, SyncMaster 400DXn-2 User manual

Samsung 2033HD, LS20CFVKFEN, SyncMaster 400DXn-2 User manual
SyncMaster P2033HD
LCD TV Monitor
User Manual
Table Of Contents
MAJOR SAFETY PRECAUTIONS
Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Care and Maintenance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
INSTALLING THE PRODUCT
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Installing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Removing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Attaching a Wall Mount/Desktop Stand . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Using it as a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Connecting an HDMI cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Connecting Using a DVI to HDMI Cable
. . . . . . . . . . . . . . . . . . . . . . . 2-8
Connecting a Component cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
Connecting a Scart cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Connecting COMMON INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Connecting to an Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
Connecting Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
Kensington Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
USING THE PRODUCT
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Viewing the Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Teletext Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Using the Screen Adjustment Menu (OSD: On Screen Display) . . . . 3-5
Installing the Device Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
INSTALLING THE SOFTWARE
Natural Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
MultiScreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
TROUBLESHOOTING
Monitor Self-Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Before Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
MORE INFORMATION
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Contact SAMSUNG WORLDWIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Correct Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
1
Major Safety Precautions
1-1
Before You Start
Icons used in this manual
ICON
NAME
MEANING
Caution
CautionIndicates cases where the function may not work or the setting may be canceled.
Note
Indicates a hint or tip to operate a function.
Using this Manual
• Make yourself fully aware of the safety precautions before using this product.
• If a problem occurs, refer to the 'Troubleshooting' section.
Copyright Notice
The contents of this manual are subject to change without prior notice for performance improvement.
Copyright ©2009 Samsung Electronics Co., Ltd. All Rights Reserved.
The copyright of this manual is reserved by Samsung Electronics, Co., Ltd.
The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written
permission of Samsung Electronics, Co., Ltd.
The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics, Co., Ltd.
Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are the registered trademarks of the Video Electronics Standard Association.
The ENERGY STAR® logo is the registered trademark of the U.S. Environmental Protection Agency.
All other trademarks mentioned herein belong to their respective companies.
As a partner of ENERGY STAR®, Samsung Electronics, Co., Ltd. admits that this product satisfies the ENERGY STAR®
specifications for energy saving.
Major Safety Precautions
1-1
1-2
Care and Maintenance
External Surface and Screen Maintenance
Clean the product with a soft dry cloth.
• Avoid cleaning the product with an inflammable substance such as
benzene or thinner or with a wet cloth. This may result in a problem
with the product.
• Avoid scratching the screen with your fingernails or a sharp object.
• Avoid cleaning the product by spraying water onto it. If water enters
the product, it may result in fire, electric shock or a problem with
the product.
A white stain may be generated on the surface of the model if a
supersonic humidifier is used near it.
The appearance and the color may differ depending on models.
Securing the Installation Space
• Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature.
Install the product so the required distances shown in the figure are kept.
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
-If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the
product falling.
-If you use parts provided by another manufacturer, it may result in a problem with the product or fire due to an increase
in the internal temperature of the product due to poor ventilation.
The appearance may differ depending on the product.
When installing the product with a stand
When installing the product with a wall-mount
About persistent images
• Displaying a still image for a long time may create a persistent image or stain on the screen.
If you do not use the product for a long time, set the power-saving mode or screen saver.
• Due to technological constraints of the LCD Panel manufacturer, the images generated by this product may appear either brighter or
darker than normal by appr. 1ppm (parts per million) pixel.
The number of sub-pixels of an LCD panel by size: The number of Sub-Pixels = Max. Horizontal Resolution x Max. Vertical
Resolution x 3
1-2
Major Safety Precautions
1-3
Safety Precautions
Icons used for safety precautions
ICON
NAME
Warning
Caution
MEANING
Failing to follow the precautions marked with this sign may result in a serious injury or even a
fatality.
Failing to follow the precautions marked with this sign may result in a personal injury or property
damage.
Meaning of Signs
Do not perform.
Must be followed.
Do not disassemble.
The power plug must be unplugged from the
wall outlet.
Do not touch.
Must be grounded to prevent electric shock.
Power Related
The following images are for your reference and may differ depending on models and countries.
Warning
Avoid using a damaged power cord or plug
or a loose power outlet.
• Otherwise, it may result in electric shock
or fire.
Avoid plugging in or unplugging the power
supply with wet hands.
Avoid connecting multiple electric appliances to a single wall outlet.
• Otherwise, it may result in fire due to
overheating of the wall outlet.
Plug the power plug in firmly.
• Otherwise, it may result in fire.
• Otherwise, it may result in electric shock.
Make sure to connect the power cord to a
grounded wall outlet (for insulation class 1
equipment only).
• Otherwise, it may result in electric shock
or injury.
Keep the power cord and the product away
from a heater.
• Otherwise, it may result in electric shock
or fire.
Major Safety Precautions
Avoid bending or twisting the power cord
excessively and avoid placing heavy objects
on the cord.
• Otherwise, it may result in electric shock
or fire due to a damaged power cord.
If the pins of the power plug or the wall outlet are covered in dust, clean it using a dry
cloth.
• Otherwise, it may result in fire.
1-3
Caution
Avoid unplugging the power plug while the
product is operating.
• Otherwise, it may damage the product due
to electric shock.
When unplugging the power plug from the
wall outlet, make sure to hold it by the plug
and not by the cord.
• Otherwise, it may result in electric shock or
fire.
Make sure to use only the power cord supplied by our company. In addition, do not use
the power cord of another electric appliance.
• Otherwise, it may result in electric shock or
fire.
Connect the power plug to a wall outlet that
can be easily reached.
• When a problem occurs with the product,
you must unplug the power plug to cut
the power off completely. You cannot cut
the power off completely using only the
power button on the product.
Installation Related
Warning
Avoid placing burning candles, mosquitorepellentor cigarettes on the product.
• Otherwise, it may result in fire.
Ask an installation engineer or relevant
company to install the product onto the wall.
• Otherwise, it may result in injury.
• Make sure to use the specified wall
mount.
Avoid installing the product in a badly-ventilated location such as inside a bookshelf or
closet.
• Otherwise, it may result in fire due to
internal over-heating.
Keep the plastic bags used to pack the
product away from children.
• If children place the plastic bags over their
heads, they may suffocate.
Keep a distance of at least 10 cm(3.93
inches) from the wall when installing the
product for ventilation.
• Otherwise, it may result in fire due to
internal over-heating.
Avoid installing the product in a location that
is unstable or exposed to excessive vibration such as on an unstable or slanted shelf.
• The product may fall and this may result in
damage to the product or injury.
• If you use the product in a location
exposed to excessive vibrations, it may
result in a problem with the product or
fire.
Avoid installing the product in a location
exposed to dust, moisture (sauna), oil,
smoke or water (rain drops) and installing it
within a vehicle.
• This may result in electric shock or fire.
1-3
Avoid installing the product in a location
exposed to direct sunlight and installing the
product near a heat source such as a fireplace or heater.
• This may shorten the product life cycle or
cause fire.
Major Safety Precautions
Avoid installing the product where children
may reach it.
• If a child touches the product, the product
may fall and this may result in injury.
• Since the front part is heavier, install the
product on a flat and stable surface.
Bend the outdoor antenna cable downwards
at the location where it comes in the house
so that rainwater does not flow in.
• If rainwater enters the product, it may
result in electric shock or fire.
Install the antenna far away from any high
voltage cables.
• If the antenna touches or falls onto a high
voltage cable, it may result in electric
shock or fire.
Caution
Do not let the product drop while moving it.
• This may result in a problem with the
product or injury.
When installing the product on a console or
shelf, make sure that the front of the product
does not protrude out of the console or
shelf.
Do not place the product face down on the
floor.
• This may damage the panel of the
product.
When putting the product down, handle it
gently.
• Otherwise, it may result in a problem with
the product or injury.
• Otherwise, this may cause the product to
fall off and result in a malfunction or
injury.
• Make sure to use a cabinet or shelf
suitable to the size of the product.
If the product is installed in a location where
the operating conditions vary considerably,
a serious quality problem may occur due to
the surrounding environment. In this case,
install the product only after consulting one
of our service engineers about the matter.
• Places exposed to microscopic dust,
chemicals, too high or low temperature,
high humidity, airports or stations where
the product is continuously used.
Cleaning Related
Warning
Before cleaning the product, unplug the
power cord.
• Otherwise, it may result in electric shock
or fire.
When cleaning the product, do not spray
water directly over the product parts.
• Make sure that water does not enter the
product.
• Otherwise, it may result in fire, electric
shock or a problem with the product.
Major Safety Precautions
1-3
Caution
Avoid spraying cleansing agent directly onto
the product.
• This may result in discoloration or
cracking of the exterior of the product or
the panel coming off.
Use a soft, damp cloth with a "monitorexclusive cleansing agent" and wipe the
product with it.
• If no monitor-exclusive cleansing agent is
available, dilute a cleansing agent with
water at a ratio of 1:10 before cleaning
the product.
When cleaning the product, disconnect the
power cord and clean the product with a soft
dry cloth.
• Avoid using chemicals such as wax,
benzene, alcohol, thinner, mosquitorepellent, fragrance, lubrication or
cleansing agent when cleaning the
product.
This may result in the exterior being
deformed or the print being removed.
Since the exterior of the product is easily
scratched, be sure to use a proper cleansing cloth. Use the cleansing cloth with a
small amount of water. However, if the cloth
is contaminated by alien substances, it may
result in scratches to the exterior; therefore
shake off any alien substances from the
cloth before using it.
Usage Related
Warning
Since a high voltage runs through the product, never disassemble, repair or modify the
product yourself.
• Otherwise, it may result in fire or electric
shock.
• If the product needs to be fixed, contact a
service center.
If the product generates a strange noise, a
burning smell, or smoke, unplug the power
plug immediately and contact a service center.
• Otherwise, it may result in electric shock
or fire.
If you drop the product or the case is damaged, turn the power off and unplug the
power cord. Contact a service center.
• Otherwise, it may result in fire or electric
shock.
When thunder or lighting occurs, unplug the
power cord and under no circumstance
touch the antenna cable as this is dangerous.
To move the product, turn the power off and
unplug the power cord, the antenna cable
and any other wires connected to the product.
• Otherwise, it may result in electric shock
or fire due to the damaged power cord.
Avoid letting children hang or climb onto the
product.
• Otherwise, it may result in the product
falling and this may result in injury or
death.
Avoid placing objects such as toys and
cookies on top of the product.
• If a child hangs over the product to grab
an object, the object or the product may
fall and this may result in injury or even
death.
Avoid dropping an object over the product
or cause impact to the product.
• Otherwise, it may result in electric shock
or fire.
• Otherwise, it may result in electric shock
or fire.
1-3
Major Safety Precautions
Avoid moving the product by pulling the
power cord or antenna cable.
• Otherwise, it may result in electric shock,
fire or a problem with the product due to
damage to the cable.
Avoid lifting up or moving the product by
holding only the power cord or signal cable.
• Otherwise, it may result in electric shock,
fire or a problem with the product due to
damage to the cable.
Take care not to block the vent by a table
cloth or curtain.
• Otherwise, it may result in fire due to
internal overheating.
When a gas leak occurs, do not touch the
product or the power plug and ventilate
immediately.
• A spark may result in an explosion or fire.
• During a thunder or lighting storm, do not
touch the power cord or antenna cable.
Avoid using or placing inflammable spray or
objects near the product.
• This may result in an explosion or fire.
Avoid inserting metal objects such as a
chopsticks, coins or hairpins, or inflammable objects into the product (the vents,
ports, etc).
• If water or substances enters the product,
turn the power off, unplug the power
cord and contact a service center.
• Otherwise, it may result in a problem with
the product, electric shock or fire.
Avoid placing a liquid container such as a
vase, flowerpot, beverage, cosmetics or
drugs, or a metal object over the product.
• If water or substances enter the product,
turn the power off, unplug the power
cord and contact a service center.
• Otherwise, it may result in a problem with
the product, electric shock or fire.
Caution
Displaying a still image for a long time may
create a persistent image or stain on the
screen.
When not using the product for a long time
such as leaving your home, unplug the
power cord from the wall outlet.
• If you do not use the product for a long
time, use the power-saving mode or set
the screensaver to the moving picture
mode.
• Otherwise, it may cause dust
accumulation and result in fire caused
by overheating or short circuit or result
in an electric shock.
Set the appropriate resolution and frequency for the product.
• Otherwise, it may result in eye strain.
Avoid turning the product upside down or
move the product holding only the stand.
• This may cause the product to fall,
resulting in damage to the product or
injury.
Watching the product from too close a distance continuously may damage your eyesight.
Avoid using a humidifier or cooker near the
product.
It is important to give your eyes some rest (5
minutes every hour) when viewing the product screen for long periods of time.
Since the display panel is hot after using it
for a long time, do not touch the product.
• Otherwise, it may result in electric shock
or fire.
• This will alleviate any eye strain.
Major Safety Precautions
1-3
Keep the small accessories in a location out
of the reach of children.
Take care when adjusting the angle of the
product or the height of the stand.
• If your hand or finger is caught, you may
be injured.
• If the product is tilted excessively, the
product may fall and this may result in
injury.
Avoid placing a heavy object over the product.
When using headphones or earphones, do
not turn the volume too high.
• Otherwise, it may result in a problem with
the product or injury.
Be careful that children do not place the batteries in their mouths when removed from
the remote control. Place the battery in a
location that children or infants cannot
reach.
• Having the sound too loud may damage
your hearing.
When replacing the batteries, insert them
with right polarity (+, -).
• Otherwise, the battery may become
damaged or it may cause fire, personal
injury or damage due to leakage of the
internal liquid.
• If children have had the battery in their
mouths, consult your doctor
immediately.
Use only specified standard batteries. Do
not use new and used batteries together.
• This may cause a battery to break or leak
and may cause fire, injury, or
contamination (damage).
The batteries (and rechargeable batteries)
are not ordinary refuse and must be
returned for recycling purposes. The customer is responsible for returning the used
or rechargeable batteries for recycling.
• The customer can return used or
rechargeable batteries to a nearby
public recycling center or to a store
selling the same type of the battery or
rechargeable battery.
Maintaining the Correct Posture when Using this Product
Maintain the correct posture when using this product.
• Straighten your back.
• Keep a distance of 45~50 cm (15~19 inches) from your eyes to the screen. Look down at the
screen and face the screen forwards.
• Maintain the correct posture when using this product.
• Adjust the angle of the product so that light is not reflected onto the screen.
• Keep your elbow at a right angle and keep your arm level with the back of your hand.
• Keep your elbow at a right angle.
• Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher
and maintain the position of your arm so that your arm is below your heart.
1-3
Major Safety Precautions
2
Installing the Product
2-1
Package Contents
• Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the product at a later stage.
CONTENTS
Installation Manual
Product Warranty
User Manual
D-Sub Cable
Stand
(Not available in all locations)
Power Cord
Batteries (AAA X 2)
Cable holding ring
Remote Control
Stereo Cable
Cleaning Cloth
SOLD SEPARATELY
DVI Cable
The cleaning cloth is supplied with black high-glossy models only.
Installing the Product
2-1
2-2
Installing the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
Place a soft cloth over the table to protect the product and place the product onto the
cloth face down.
Insert the Stand Connector into the Stand in the direction shown by the
figure.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
- Caution
Do not lift the product holding only the stand
2-2
Installing the Product
2-3
Removing the Stand
Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards.
Place a soft cloth over the table to protect the product and place the product face down.
Turn the connecting screw at the bottom of the stand to separate it.
Take the Stand Connector out of the Stand by pulling it in the direction of the arrow as
shown in the figure.
- Caution
Do not lift the product holding only the stand
Installing the Product
2-3
2-4
Attaching a Wall Mount/Desktop Stand
Attaching a Wall Mount/Desktop Stand(not supplied)
This product provides a stand mount of 75 mm x 75 mm (2.95 x 2.95 inches) that complies with the VESA specifications.
A. Wall/Desktop Stand Mount
B. Wall mount kit/desktop stand (not supplied)
1. Turn the product off and unplug the power cord from the wall outlet.
2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down.
3. Remove the screw from the stand and separate the stand.
4. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand,
wall mount stand or another stand) and firmly fix the stand by fastening the screw.
• If you use screw that is longer than the standard specifications, the inside of the product may be damaged.
• For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the
corresponding specifications.
• Avoid using screws that are incompatible with the standard VESA specifications and avoid assembling them using excessive force.
This may result in damage to the product or injury due to the product falling. Samsung shall not be held liable for any
damage or injury.
• Samsung shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible with the
specified specifications or due to an installation not performed by an authorized installation engineer.
• When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm (3.93 inches) of space from the
wall.
• Use the wall mount according to the international specifications.
2-4
Installing the Product
2-5
Connecting to a Computer
1. Connect the product to a PC depending on the video output supported by the PC.
The connecting part may differ depending on the product model.
When the graphics card provides a D-Sub <analog> output
• Connect the [PC IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable.
When the graphics card provides a DVI <digital> output
Installing the Product
2-5
• Connect the [DVI-D IN] port of the product to the DVI port of the PC with the DVI cable.
2. Connect the [ HDMI/PC/DVI-D AUDIO IN] port on the rear side of the monitor to the sound card of the PC.
3. Connect one end of the power cord to the [ POWER ] port of the product and connect the other end of the power cord to the
220V or 110V wall outlet.
(The input voltage is switched automatically.)
2-5
Installing the Product
• You may enjoy clear and quality sound from the computer sound card using the monitor's speakers. (You don't need to install
separate speakers for your computer.)
• You may get a blank screen depending on the type of video card you are using if you connect the D-sub and DVI cables
simultaneously to one computer.
• If you connect your monitor properly using the DVI connector but get a blank or fuzzy screen, check to see if the monitor status
is set to analog. Press [
Installing the Product
] button to have the monitor double-check the input signal source.
2-5
2-6
Using it as a TV
You may view television programs on the monitor if it is connected to an antenna or cable/satellite system without installing any
separate TV reception hardware or software on your computer.
1. Connect the cable/satellite or TV antenna cable to the [ANT IN] port on the rear side of the monitor.
• When using an indoor antenna/cable/satellite terminal:
Check the antenna terminal on the wall and then connect the antenna/cable/satellite TV cable.
• When using an outdoor antenna:
When using an outdoor antenna, we strongly suggest using a qualified technician to install it.
2. When the connections are completed, connect the TV power.
3. When the product is turned on for the first time after it was purchased, the initial setup operations (<Plug & Play>) begin.
• Be careful that the coaxial cable is not bent when connecting it to the antenna input terminal [ANT IN].
2-6
Installing the Product
2-7
Connecting an HDMI cable
Connect the HDMI OUT port of the AV device (Blu-Ray/DVD/Cable/Satellite box) to the [HDMI IN] terminal of the monitor using
the HDMI cable.
Press the [SOURCE] button at the front of the monitor or on the remote control to select <HDMI> mode.
You do not need to make a separate audio connection when connecting via HDMI.
Installing the Product
2-7
2-8
Connecting Using a DVI to HDMI Cable
1. Connect the DVI output terminal of an external device to the [HDMI IN] terminal of the monitor using a DVI to HDMI cable.
2. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital
output device, and connect the opposite jack to the [HDMI/PC/DVI-D AUDIO IN] terminal of the product.
Press the [SOURCE] button at the front of the monitor or on the remote control to select <HDMI> mode.
2-8
Installing the Product
2-9
Connecting a Component cable
1. Connect the VIDEO OUT port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN [PR, PB, Y]] input ports
using a component video cable [PR, PB,Y].
2. Connect the audio port of the AV device (DVD/VCR/Cable/Satellite box) to the [COMPONENT IN [R-AUDIO-L]] port of the
monitor.
Press the [SOURCE] button at the front of the monitor or on the remote control to select the <Component> mode.
For an explanation of Component video, consult your DVD manual.
Installing the Product
2-9
2-10 Connecting a Scart cable
1. Connect the EXT(RGB) port of the monitor to the DVD Player using a SCART jack.
2. When a Scart device is connected to your monitor, the Source automatically changes to EXT.
• Connect to the DVD Devices input if the device has a [EXT [RGB]] jack.
• You can watch DVD simply by hooking up the DVD player with the monitor as long as the power is on.
2-10
Installing the Product
2-11 Connecting COMMON INTERFACE
1. Insert the CI CARD into the CAM in the direction of the arrow until it fits.
2. Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.)
3. Check if you can see a picture on a scrambled signal channel.
• When not inserting
‘CI CARD’ in some channels,
‘Scrambled Signal’ is displayed on the screen.
• The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3
minutes. If an error message is displayed, please contact your service provider.
• When the channel information configuration has finished, the message
channel list is now updated.
‘Updating Completed’ is displayed, indicating that the
• You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands
since dropping the CI CARD may cause damage to it.
• Insert the CI-Card in the direction marked on it.
• CAM is not supported in some countries and regions, check with your authorized dealer.
Installing the Product
2-11
2-12 Connecting to an Amplifier
Connect the [DIGITAL AUDIO OUT (OPTICAL)] terminal of your monitor to the optical input of your amplifier using an optical
cable.
• If no sound is emitted from the monitor, you need to use an amplifier.
• For information on how to connect a speaker and amplifier, refer to the respective user manuals provided by their manufacturers.
2-12
Installing the Product
2-13 Connecting Headphones
Connect your headphones to the Headphone connection terminal.
2-14 Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations.
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information,
refer to the User Manual supplied with the locking device. You have to purchase an additional locking device.
Locking the product
1. Insert the locking part of the locking device into the hole of the Kensington lock of the product (
direction (
) and turn it in the locking
).
2. Connect the Kensington lock cable.
3. Tie the Kensington lock cable to a desk or heavy object.
You can purchase the locking device from an electronics store or an online shop.
Installing the Product
2-13
3
Using the Product
3-1
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the [POWER
] button on the remote control.
• You can also use the [POWER
] button on the TV.
• The message <Select the OSD Language>. is displayed.
2. Press the [
choice.
] button. Select the appropriate language by pressing the ▲ or ▼ button. Press the [
3. Press the ◄ or ► button to select <Store Demo> or <Home Use>, then the [
] button to confirm your
] button.
• We recommend setting the TV to <Home Use> mode for the best picture in your home environment.
• <Store Demo> mode is only intended for use in retail environments. If the unit is accidentally set to <Store Demo> mode and
you want to return to <Home Use> (Standard): Press the volume button on the TV. When the volume OSD is displayed,
press and hold the [MENU] button on the TV for 5 seconds.
4. Press the [
choice.
] button. Select the appropriate country by pressing the ▲ or ▼ button. Press the [
5. Press the ▲ or ▼ button to select <Air> or <Cable> then press the [
] button to confirm your
] button.
• <Air>: <Air> antenna signal. / <Cable>: <Cable> antenna signal.
• In Cable mode, you can select the correct signal source among <STD>, <HRC>, and <IRC> by pressing the ▲, ▼, ◄ or ►
button, then press the [ ] button. If you have Digital cable, select the cable system signal source for both Analog and
Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
6. Press the ▲ or ▼ button to select the channel source to memorize. Press the [
] button to select <Start>.
• When setting the antenna source to <Cable>, a step appears allowing you to set a value for the digital channel search. For
more information, refer to <Channel> → <Auto Store>.
• <Digital & Analogue>: Digital and Analogue channels.
• <Digital>: Digital and Analogue channels.
• <Analogue>: Analogue channels.
• The channel search will start and end automatically.
• Press the [
] button at any time to interrupt the memorization process.
• After all the available channels are stored, the message Set the<Clock Mode> is displayed.
7. Press the [
] button.
Press the ▲ or ▼ button to select <Auto>, then Press the [
] button.
• If you select <Manual>, <Set current date and time> is displayed.
3-1
Using the Product
• If you have received a digital signal, the time will be set automatically. If not, select <Manual> to set the clock.
8. The description for the connection method providing the best HD screen quality is displayed. Check the description and press
the [
] button.
9. The message <Enjoy your TV.> is displayed. When you have finished, press the [
] button.
If you want to reset this feature...
1. Press the [MENU] button to display the menu. Press the ▲ or ▼ button to select <Setup>, then press the [
2. Press the [
] button.
] button again to select <Plug & Play>.
The <Plug & Play> feature is only available in the TV mode.
Using the Product
3-1
3-2
Viewing the Control panel
ICON
DESCRIPTION
Use this button to select a function.
[
]
Signals other than the TV signal can only be selected if the corresponding device is
connected.
The order in which the TV/external input signal changes.
<PC> → <DVI> → <TV> → <Ext.> → <Component> → <HDMI>
Press this button to view the On Screen Display (OSD).
[
,
]
[ +/- ]
This button is also used to exit the OSD or to return to a higher-level OSD menu.
Moves from one menu item to another horizontally or adjusts selected menu values.
Adjusts the audio volume.
,
[▲/▼]
[
]
Remote Control Sensor
Power indicator
Speaker
3-2
Use these buttons to navigate the menu or to adjust a value in the OSD.
Press this button to turn the product on or off.
Aim the remote control towards this spot on the Monitor.
This light is lit when operating normally, and blinks once when your adjustments are
saved.
See PowerSaver described in the manual for further information regarding
power saving functions. For energy conservation, turn your monitor OFF when
it is not needed or when leaving it unattended for long periods.
You can hear sound by connecting the soundcard of your PC to the monitor.
Using the Product
3-3
Remote Control
The performance of the remote control may be affected by a TV or other electronic device operating near the product,
causing a malfunction due to interference with the frequency.
TV
POWER
Selects the TV mode directly.
Turns the product On/Off.
Number Buttons
PRE-CH
Press to change the channel.
This button is used to return to
the immediately previous channel.
MUTE
Activates a highlighted menu item.
+
Adjusts the audio volume.
P
-
Press to increase or decrease the
volume.
CH LIST
Press to change channels.
SOURCE
It displays "Channel List" on the
screen.
Press the button to change the
input signal SOURCE.
Changing the SOURCE is only
allowed for external devices that
are connected to the LCD Display at the time.
FAV.CH
MENU
Opens the on-screen menu and
exits from the menu or closes the
adjustment menu.
TOOLS
RETURN
Use to quickly select frequently
used functions.
Up-Down Left-Right buttons
Press to switch to your favourites
channels.
ENTER
Returns to the previous menu.
EXIT
Exits from the menu screen.
Moves from one menu item to
another horizontally, vertically or
adjusts selected menu values.
SUBT.
INFO
Current picture information is displayed on the upper left corner of
the screen.
Digital subtitle display
COLOUR BUTTONS
GUIDE
Press to add or delete channels and
to store channels to the favorite
channel list in the “Channel List”
menu.
Electronic Program Guide (EPG)
display.
TTX / MIX
TV channels provide written information services via teletext.
,
,
Using the Product
,
,
,
,
,
,
3-3
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
Make sure to match the +and - ends of the batteries with the diagram inside the compartment.
3. Close the cover.
Remove the batteries and store them in a cool, dry place if you won‘t be using the remote control for a long time.
If the remote control doesn‘t work, check the following :
• Is the TV power on?
• Are the plus and minus ends of the batteries reversed?
• Are the batteries drained?
• Is there a power outage or is the power cord unplugged?
• Is there a special fluorescent light or neon sign nearby?
3-3
Using the Product
3-4
Teletext Feature
Most television stations provide written information services via Teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can select various options to suit your requirements by using the
remote control buttons.
For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing
or some pages may not be displayed.
You can change teletext pages by pressing the numeric buttons on the remote control.
Using the Product
3-4
(exit)
Exit from the teletext display.
(index)
Used to display the index (contents)
page at any time while you are
viewing teletext.
(store)
Used to store the teletext pages.
(size)
Press to display the double-size letters in the upper half of the screen.
For lower half of the screen, press it
again. To display normal screen,
press it once again.
(reveal)
Used to display the hidden text
(answers to quiz games, for example). To display normal screen,
press it again.
(teletext on/mix)
Press to activate teletext mode after
selecting the channel providing the
teletext service. Press it twice to
overlap the teletext with the current
broadcasting screen.
(page up)
Used to display the next teletext
page.
(page down)
Used to display the previous teletext page.
(mode)
Press to select the teletext mode
(LIST/FLOF). If you press it in the
LIST mode, it switches into the
List save mode. In the List save
mode, you can save teletext
page into list using the 8(store)
button.
(hold)
Used to hold the display on a
given page if the selected page is
linked with several secondary
pages which follow on automatically. To resume, press it again.
(cancel)
Used to display the broadcast
when searching for a page.
Colour buttons (red / green / yellow / blue)
If the FASTEXT system is used
by a broadcasting company, the
different topics covered on a teletext page are colour-coded and
can be selected by pressing the
coloured buttons.
Press one of them corresponding
to the required. The page is displayed with other coloured information that can be selected in the
same way. To display the previous or next page, press the corresponding coloured button.
(sub-page)
Used to display the available subpage.
3-4
Using the Product
3-5
Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
TOP MENUS
SUB MENUS
Picture
MagicBright
Contrast
Brightness
Sharpness
Auto Adjustment
[PC / DVI]
Screen
Picture Options
Picture Reset
Picture
Mode
Backlight
Contrast
Brightness
Sharpness
[TV / Ext. / Component /
HDMI]
Colour
Tint (G/R)
Advanced Settings
Picture Options
Picture Reset
Sound
Mode
Equalizer
Audio Language
Audio Format
Audio Description
Auto Volume
Speaker Select
Sound Reset
Country
Auto Store
Manual Store
Cable Search
Option
Now & Next
Guide
Full Guide
Default Guide
Channel List
Channel Mode
Fine Tune
Plug & Play
Language
Time
Game Mode
Child Lock
Change PIN
Parental Lock
Subtitle
Teletext Language
Preference
Digital Text
Light Level
Melody
Energy Saving
Common Interface
Input
Source List
Edit Name
Application
Anynet+ (HDMICEC)
Support
Self Diagnosis
HD Connection
Guide
Contact Samsung
Channel
Setup
Software
Upgrade
Available Modes
The icons below represent the acronyms of the input signals that are displayed to indicate the functions that are changed
depending on the input signal.
Indicates the signal when <PC> or <DVI> is selected in the <Source List >.
This is the PC video signal that is connected to and input through the [PC] and [DVI] terminals.
Indicates the signal when <Ext.> is selected in the <Source List >.
This is the video signal input through the [Ext.] terminal.
Indicates the signal when <HDMI> is selected in the <Source List >.
This is the signal input through the [HDMI] terminal.
Indicates the signal when <TV> is selected in the <Source List >.
This is the signal input through the [ANT IN] terminal.
Indicates the signal when <Component> is selected in the <Source List >.
This is the signal input through the [COMPONENT] terminal.
Using the Product
3-5
Picture [PC / DVI ]
The default setting may be different depending on the selected Input Mode (input signal source selected in External Input
List) and the selected resolution
MENU
MagicBright
DESCRIPTION
<MagicBright> is a feature providing an optimum viewing environment depending on the contents of
the image you are watching. Currently five different modes are available: <Entertain>, <Internet>,
<Text>, <Dynamic Contrast> and <Custom>. Each mode has its own pre-configured brightness
value.
• <Entertain>
High Brightness
For watching motion pictures such as a Blu-Ray or DVD.
• <Internet>
For working with a mixture of images such as texts and graphics.
• <Text>
For documents or work involving heavy text.
• <Dynamic Contrast>
<Dynamic Contrast> automatically detects the distribution of the visual signal and adjusts to
create an optimum contrast.
• <Custom>
Although the values are carefully chosen by our engineers, the pre-configured values may not be
comfortable to your eyes depending on your taste.
If this is the case, adjust the Brightness and Contrast by using the OSD menu.
Press the [TOOLS] button to display the <Tools> menu. You can also set the MagicBright by
selecting <Tools> → <MagicBright>.
Contrast / Brightness /
Sharpness
You can use the on-screen menus to change the contrast and brightness according to personal preference.
• <Contrast> - Adjust the Contrast.
• <Brightness> - Adjust the Brightness.
• <Sharpness> - Adjust the Sharpness.
Auto Adjustment
The values of <Fine>, <Coarse> and <Position> are adjusted automatically.
By changing the resolution in the control panel, auto function is performed.
Available in <PC> Mode Only
Press the [TOOLS] button to display the <Tools> menu. You can also set the auto adjustment by
selecting <Tools> → <Auto Adjustment>.
3-5
Using the Product
MENU
Screen
DESCRIPTION
• <Coarse>
Removes noise such as vertical stripes.
<Coarse> adjustment may move the screen image area. You may relocate it to the center using
the horizontal control menu
• <Fine>
Removes noise such as horizontal stripes.
If the noise persists even after <Fine> tuning, repeat it after adjusting the frequency (Coarse).
• <PC Position>
Adjusts the screen location horizontally and vertically.
• <Image Reset>
Image parameters are replaced with the factory default values.
Available in <PC> Mode Only
Picture Options
• <Colour Tone>
The tone of the colour can be changed.
Available in <PC> / <DVI> mode only
•
<Cool> - <Normal> - <Warm> - <Custom>
• <R-Gain > - < G-Gain > - <B-Gain >
Adjusts the individual R, G, B colour controls.
• <Size>
You can switch the Size.
•
Picture Reset
<16:9> - <4:3>
Picture parameters are replaced with the factory default values.
• <Reset Picture Mode> - <Cancel>
Picture [ TV / Ext. / Component / HDMI ]
Using the Product
3-5
MENU
Mode
DESCRIPTION
You can select the type of picture which best corresponds to your viewing requirements.
You can activate either <Dynamic>, <Standard>, or <Movie>.
• <Dynamic>
Selects the picture for high-definition in a bright room.
• <Standard>
Selects the picture for optimum display in a normal environment.
• <Movie>
Selects the picture for viewing movies in a dark room.
Press the [TOOLS] button to display the <Tools> menu. You can also set the <Picture Mode> by
selecting <Tools> → <Picture Mode>.
Backlight / Contrast /
Brightness / Sharpness / Colour / Tint (G/
R)
Your product has several setting options that allow you to control the picture quality.
• <Backlight > - Adjusts the brightness of LCD back light.
• <Contrast> - Adjusts the contrast level of the picture.
• <Brightness> - Adjusts the brightness level of the picture.
• <Sharpness> - Adjusts the edge definition of the picture.
• <Colour> - Adjusts colour saturation of the picture.
• <Tint (G/R)> - Adjusts the colour tint of the picture.
It is activated when the signal is NTSC.
Advanced Settings
Samsung‘s new TVs allow you to make even more precise picture settings than previous models.
See below to adjust detailed picture settings.
<Advanced Settings> is available in <Standard> or <Movie> mode.
• <Black Tone> - You can select the black level on the screen to adjust the screen depth.
•
<Off> - <Dark> - <Darker> - <Darkest>
• <Dynamic Contrast> -You can adjust the screen contrast so that the optimal contrast is provided.
•
<Off> - <Low> - <Medium> - <High>
• <Gamma> - You can adjust the Primary Colour (Red, Green, Blue) Intensity.
• <Colour Space> - <Colour Space> is a colour matrix composed of red, green and blue colours. Select
your favorite <Colour Space> to experience the most natural colour.
•
<Auto> - <Native>
• <White Balance> - You can adjust the colour temperature for more natural picture colours.
•
<R-Offset> - <G-Offset> - <B-Offset> - <R-Gain> - <G-Gain> - <B-Gain> - <Reset>
• <Flesh Tone> - You can emphasize the pink <Flesh Tone> in the picture.
Changing the adjustment value will refresh the adjusted screen.
• <Edge Enhancement> - You can emphasize object boundaries in the picture.
•
3-5
<Off> - <On>
Using the Product
MENU
Picture Options
DESCRIPTION
• <Colour Tone>
The tone of the colour can be changed.
•
<Cool> - <Normal> - <Warm1> - <Warm2>
•<Warm1> or <Warm2> is only activated when the picture mode is <Movie>.
•Settings can be adjusted and stored for each external device you have connected to an input of the
TV.
• <Size>
You can switch the Size.
•
<Auto Wide> - Automatically adjusts the picture size to the 16:9 aspect ratio.
•
<16:9> - Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
•
<Wide Zoom> - Magnify the size of the picture more than 4:3.
•
<Zoom> - Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
•
<4:3> - This is the default setting for a video movie or normal broadcasting.
•
<Screen Fit> - Use the function to see the original image with no cut-off with HDMI (720p/ 1080i
/ 1080p), Component (1080i / 1080p) input signals.
Press the [TOOLS] button to display the <Tools> menu. You can also set the size by selecting
<Tools> → <Picture Size>.
•
Depending on the input source, the picture size options may vary.
•
The items available may differ depending on the selected mode.
•
Settings can be adjusted and stored for each external device you have connected to an
input of the TV.
•
<Wide Zoom> : Press the ► button to Select Position, then press the [
the ▲ or ▼ button to move the picture up/down. Then press the [
•
<Zoom>: Press the ► button to Select Position, then press the [
or ▼ button to move the picture up and down. Then press the [
button to Select Size, then press the [
] button.
] button. Press the ▲
] button. Press the ►
] button. Press the ▲ or ▼ button to magnify or
reduce the picture size in the vertical direction. Then press the [
•
] button. Press
] button.
After selecting <Screen Fit> in HDMI (1080i) or Component (1080i) mode: Select Position
by pressing the ◄ or ► button. Use the ▲,▼, ◄ or ► button to move the picture.
•
<Reset> : Press the ◄ or ► button to select <Reset> , then press the [
can initialize the setting.
•
If you use the <Screen Fit> function with HDMI 720p input, 1 line will be cut at the top,
bottom, left and right as in the Overscan function.
] button. You
• <Screen Mode>
Only when setting the picture size to <Auto Wide> can the user determine the Screen mode. Each
individual European country requires a different picture size so this function is intended to help
users to select it.
•
<16:9> - Sets the picture to 16:9 wide mode.
•
<Wide Zoom> - Magnify the size of the picture more than 4:3.
•
<Zoom> - Magnify the size of the picture vertically.
•
<4:3> - Sets the picture to 4:3 normal mode.
This function is available in <Auto Wide> mode.
This function is not available in PC,DVI, Component or HDMI mode.
Using the Product
3-5
MENU
Picture Options
DESCRIPTION
• <Digital NR>
Digital Noise Reduction.
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
•
<Off> - <Low> - <Medium> - <High> - <Auto>
• <HDMI Black Level>
When a DVD or set-top box is connected to your TV via <HDMI>, it may cause a degradation in the
screen quality, such as an increase in the black level, a low contrast, or discoloration, etc.,
depending on the external device connected. In this case, adjust the screen quality of your TV by
configuring the <HDMI Black Level>. This function is active only when an external device (DVD
player, STB etc.) is connected to the TV via <HDMI>.
This function is active only when the external input connects to HDMI (RGB signals).
•
<Normal> - <Low>
• <Film Mode>
The <Film Mode> feature offers you a theater-quality viewing experience.
<Film Mode> is supported in <TV>, <Component> (480i / 1080i) and <HDMI>(480i / 1080i)
•
Picture Reset
<Off> - <Auto>
Picture parameters are replaced with the factory default values.
• <Reset Picture Mode> - <Cancel>
Sound
3-5
Using the Product
MENU
Mode
DESCRIPTION
• <Standard>
Choose Standard for the standard factory settings.
• <Music>
Choose Music when watching music videos or concerts.
• <Movie>
Choose Movie when viewing movies.
• <Clear Voice >
Emphasizes voice over other sounds.
• <Custom >
Choose Custom if you want to adjust the settings according to personal preference .
Press the [TOOLS] button to display the <Tools> menu. You can also set the <Sound Mode> by
selecting <Tools> → <Sound Mode>.
Equalizer
You can adjust the left and right sound balance and equalizer settings as required.
• <Mode> - You can select a sound mode to suit your personal preferences.
• <Balance> - You can adjust the left and right sound balance and equalizer settings as required
• <100Hz> - <300Hz> - <1KHz> - <3KHz> - <10KHz> - <Reset>
Audio Lanugage
You can change the default value for audio languages. Displays the language information for the
incoming stream.
• While viewing a digital channel, this function can be selected.
• You can only select the language among the actual languages being broadcast.
Audio Format
When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur
due to the decoding speed difference between the main speaker and the audio receiver. In this case,
use the TV Speaker function.
• <MPEG> - <Dolby Digital>
• While viewing a digital channel, this function can be selected.
• The Audio Format appears according to the broadcasting signal.
Audio Description
This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the Audio Stream for the AD (Audio Description), when it is sent along
with the Main audio from the broadcaster. Users can turn the Audio Description On or Off and control
the volume.
• <Audio Description>
Turn the audio description function on or off.
• <Volume>
You can adjust the audio description volume.
• Volume is active when Audio Description is set to On.
• While viewing a Digital channel, this function can be selected.
Auto Volume
Reduces the differences in volume level among channels.
• <Off> - <On>
Using the Product
3-5
MENU
Speaker Select
DESCRIPTION
When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen
to sound from the Home theater’s (external) speakers.
• <External Speaker>
Used to listen to the sound of the External (Home Theater) Speakers.
• <TV Speaker>
Used to listen to the sound of the TV Speakers.
• If you select <External Speaker> in the <Speaker Select> menu, the sound settings will be limited.
• The volume and [MUTE] buttons do not operate when the <Speaker Select> is set to <External
Speaker>. Please set the volume on your Home theater.
Sound Reset
You can restore the <Sound> settings to the factory defaults.
• <Reset All> - <Reset Sound Mode> - <Cancel>
<Reset Sound Mode>: Current sound values return to default settings.
Selecting the Sound Mode
You can set the sound mode in the <Tools> menu. When you set to <Dual l ll> the current sound mode is displayed on the
screen
3-5
Using the Product
A2
Stereo
AUDIO TYPE
DUAL 1 / 2
DUAL 1 / 2
Mono
MONO
Automatic change
Stereo
STEREO
Dual
DUAL 1
Mono
NICAM
Stereo
Stereo
Dual
MONO
DUAL 2
MONO
MONO
MONO
Automatic change
DUAL 1
Automatic change
STEREO
Automatic change
DUAL 1
DUAL 1
DUAL 2
If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
Channel
Using the Product
3-5
MENU
Country
DESCRIPTION
Select the country in which the product is being used before you use the Auto Store feature. If you do
not see your country in the list, select Others.
• <Analogue Channel>
You can change the country for analogue channels.
• <Digital Channel>
You can change the country for digital channels.
The PIN number input screen appears. Enter your 4 digit PIN number.
Auto Store
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers.
If a channel is locked using the <Child Lock> function, the PIN input window appears.
• <Air / Cable>
Antenna source to memorize.
<Air / Cable>
•
<Digital & Analogue>
Digital and Analogue channels.
•
<Digital >
Digital channels.
•
<Analogue >
Analogue channels.
When selecting Cable → Digital & Analogue or Cable → Digital : Provide a value to scan for
cable channels.
•
<Search Mode>
Full / Network / Quick
Quick
•
<Network ID>
Displays the network identification code.
•
<Frequency>
Displays the frequency for the channel. (Differs in each country)
•
<Modulation>
Displays available modulation values.
•
<Symbol Rate>
Displays available symbol rates.
Scans for all channels with active broadcast stations and stores them in the TV`s
memory.
3-5
Using the Product
MENU
Manual Store
DESCRIPTION
You can scan the frequency ranges available on your television in your area and store all the channels found manually.
• <Digital Channel>
Manual store for digital channels.
•
<Channel>
Set the Channel number using the ▲ ,▼ or number (0~9) buttons
•
<Frequency>
Set the frequency using the number buttons.
•
<Bandwidth>
Set the bandwidth using the ▲ ,▼ or number (0~9) buttons.
•
<Digital Channel> is only available in DTV mode.
•
When it has finished, channels are updated in the channel list.
• <Analogue Channel>
Manual store for analogue channel.
•
<Programme> (<Programme> number to be assigned to a channel)
Sets the programme number using the ▲ ,▼ or number (0~9) buttons
•
<Colour System>
Adjusts repeatedly until the colour is of the best quality. Sets the colour system value using
the ▲ or ▼ button.
•
<Auto>-<PAL>-<SECAM>-<NTSC4.43>
•
<Sound System>
Adjusts repeatedly until the sound is of the best quality. Sets the sound system value using
the ▲ or ▼ button.
•
<Channel> (When you know the number of the channel to be stored)
You can store television channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found. The Programme number of each stored
channel which you wish to identify
•
<BG>-<DK>-<I>-<L>
•
<C> (Air channel mode)
You can select a channel by entering the assigned number to each air broadcasting
station in this mode.
•
<S> (Cable channel mode)
You can select a channel by entering the assigned number for each cable channel in this
mode.
•
<Search> (When you do not know the channel numbers)
Press the ▲ or ▼ button to start the search. The tuner scans the frequency range until the first
channel or the channel that you selected is received on your screen.
•
<Store> (When you store the channel and associated programme number)
It's used to restore the number user inputs. Set to OK by pressing the [
Cable Search Option
(depending on the
country)
] button.
Using this function, you can manually add the channel range to be scanned by full search mode of
the Auto Store function.
• <Frequency (Start ~ Stop)>
Displays the frequency for the channel.
• <Modulation >
Displays available modulation values.
• <Symbol Rate>
Displays available symbol rates.
Using the Product
3-5
MENU
Now & Next Guide /
Full Guide / Default
Guide
DESCRIPTION
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme
entries may appear blank or out of date as a result of the information broadcast on a given channel.
The display will dynamically update as soon as new information becomes available.
You can also display the guide menu simply by pressing the [GUIDE] button. (To configure the
<Default Guide>, refer to the descriptions.).
• <Now & Next Guide>
For the six channels indicated in the left-hand column, displays the Current programme and the
Next programme information.
• <Full Guide>
Displays the programme information as time ordered One hour segments. Two hours of
programme information is displayed which may be scrolled forwards or backwards in time.
•
The programme title is on the upper part of the screen center. Please click on INFO
button for the detailed information. Channel Number, Running Time, Status Bar,
Parental Level, Video Quality Information(HD/SD), Sound Modes, Subtitle or Teletext,
Languages of Subtitle or Teletext, and brief summary of the highlighted programme are
included on the detailed information.
•
“... “ will be appeared if the summary is long.
•
Six channels are displayed. To scroll between channels, move to a channel using the ▲
or ▼ button. To display page by page, use the
or
button.
• <Default Guide>
You can decide whether to display either the <Now & Next Guide> or the <Full Guide> when the
GUIDE button on the remote control is pressed.
•
3-5
<Now & Next> / <Full Guide>
Using the Product
MENU
Channel List
DESCRIPTION
Using this menu, you can add / delete or set favorite channels and use the program guide for digital
broadcasts.
You can select these options by simply pressing the [CH LIST] button on the remote control.
• <All Channels> - Shows all currently available channels.
• <Added Channels> - Shows all added channels.
• <Favourites> - Shows all favorite channel.
Press the [TOOLS] button to display the <Tools> menu. You can also set the add to (or delete
from) Favourite by selecting [Tools] → <Add to Favourite> (or <Delete from Favourite>).
To select the favorites channels you have set up, press the [FAV.CH] button on the remote
control.
• <Programmed> - Shows all current reserved programs.
•
Select a channel in the <All Channels>, <Added Channels> or <Favorites> screen by
pressing the ▲ / ▼ buttons, and pressing the [
selected channel.
•
•
Channel Mode
] button. Then you can watch the
Using the Colour buttons with the <Channel List>
•
Green (<Zoom>): Enlarges or shrinks a channel number.
•
Yellow (<Select>): Selects multiple channel lists. You can perform the add / delete or
add to Favorite / delete from Favorite function for multiple channels at the same time.
Select the required channels and press the yellow button to set all the selected
channels at the same time. The check mark appears to the left of the selected
channels.
•
[TOOLS] (<Tools>): Displays the <Add> (or <Delete>), <Add to Favorite> (or
<Delete from Favorite>), <Timer Viewing>, <Channel Name Edit>, <Select All> (or
<Deselect All>) and <Auto Program> menus (The Options menus may differ
depending on the situation.)
Channel Status Display Icons
•
: An analogue channel.
•
: A channel set as a <Favorite>.
•
: A channel selected by pressing the yellow button.
•
: A Program currently being broadcast.
•
: A locked channel.
•
: A reserved program.
When press the
button, Channels will be switched within the selected channel list.
• <Added Ch.>
Channels will be switched within the memorized channel list.
• <Favourite Ch.>
Channels will be switched within the favourite channel list.
Fine Tune
Use fine tuning to manually adjust a particular channel for optimal reception.
• If you do not store the fine-tuned channel in memory, adjustments are not saved.
• Fine tuned channels that have been saved are marked with an asterisk ‘*’ on the right-hand side of
the channel number in the channel banner.
• To reset the fine tuning setting, press the ▼ button to select <Reset>, then press the [
] button.
• Only Analogue TV channels can be fine tuned.
Using the Product
3-5
Setup
MENU
DESCRIPTION
Plug & Play
This brings up the menu items that appeared when you first plugged in the TV.
Language
The language chosen affects only the language of the OSD.
Time
• <Clock>
• The current time will appear every time you press the [INFO] button.
• If you disconnect the power cord, you have to set the clock again.
• Setting the clock is necessary in order to use the various timer features of the TV.
• <Clock Mode>
You can set up the current time manually or automatically.
•
<Auto> - <Manual>
•Depending on the broadcast station and signal, the auto time may not be set correctly. If this
occurs, set the time manually.
•The Antenna or cable must be connected in order to set the time automatically.
• <Clock Set>
You can set the current time manually.
•This function is only available when <Clock Mode> is set to <Manual>.
•You can set the month, day, year, hour and minute directly by pressing the number buttons on the
remote control.
Time
• <Sleep Timer>
The sleep timer automatically shuts off the TV after a preset time .
• <Off> - <30 min> - <60 min> - <90 min> - <120 min> - <150 min> - <180 min>
Press the [TOOLS] button to display the <Tools> menu. You can also set the sleep timer by
selecting <Tools> → <Sleep Timer>.
To cancel the <Sleep Timer> function, select <Off>.
3-5
Using the Product
MENU
Time
DESCRIPTION
• <Timer1 / Timer2 / Timer3>
Three different on / off timer settings can be made. You must set the clock first.
• <On Time>
Set the <hour>, <minute>, <am/pm>, and <activate/inactivate>.
(To activate the timer with the setting you’e chosen, set to Activate.)
• <Off Time>
Set the <hour>, <minute>, <am/pm>, and <activate/inactivate>.
(To activate the timer with the setting you’e chosen, set to Activate.)
• <Volume>
Set the desired volume level.
• <Antenna>
View antenna type. (<ATV> or <DTV>).
• <Channel>
Select the desired channel.
• <Repeat>
Select <Once>, <Everyday>, <Mon~Fri>, <Mon~Sat>, <Sat~Sun> or <Manual>.
•
When <Manual> is selected, press the ► button to select the desired day of the week.
Press the [
] button over the desired day and the (
) mark will appear.
•You can set the <hour>, <minute> and channel by pressing the number buttons on the
remote control.
•Auto Power Off
When you set the timer On, the television will eventually turn off if no controls are operated for 3
hours after the TV was turned on by the timer. This function is only available in timer On mode
and prevents overheating, which may occur if a TV is on for too long time.
Game Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic
gaming experience by selecting game menu.
• <Off> - <On>
• Restrictions on game mode (Caution)
•To disconnect the game console and connect another external device, set <Game Mode>
to <Off> in the setup menu. If you display the TV menu in <Game mode>, the screen
shakes slightly.
• If <Game Mode> is <On> :
•Picture mode is automatically changed to <Standard> and cannot be changed.
•Sound mode is automatically changed to <Custom> and cannot be changed. Adjust the
sound using the equalizer.
• <Game Mode> is not available in regular <TV> and <PC> mode.
• If the picture is poor when external device is connected to TV, check if <Game Mode> is <On>. Set
<Game Mode> to <Off> and connect external devices.
Using the Product
3-5
MENU
Child Lock
DESCRIPTION
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable
programme by muting out video and audio.
• <Off>-<On>
• Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN
number.
• The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting <Change
PIN> from the menu.
• You can lock some channels in <Channel List>.
• <Child Lock> is available only in TV mode.
Change PIN
You can change your personal ID number that is required to set up the TV.
• Before the setup screen appears, the PIN number input screen appears. Enter your 4digit PIN
number.
• The default PIN number of a new TV set is 0-0-0-0.
• If you forget the PIN code, press the remote control buttons in the following sequence, which resets
the PIN to 0-0-0-0: [POWER] (Off) → [MUTE] → 8 → 2 → 4 → [POWER] (On).
Parental Lock
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable
programme by a 4-digit PIN (Personal Identification Number) code that is defined by the user.
• <Allow All>
Press to unlock all TV ratings.
• <Block All>
Press to lock all TV ratings.
• Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN
number.
• The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by selecting Change PIN
from the menu.
• When the parental ratings are set, the
Subtitle
symbol is displayed.
You can activate and deactivate the subtitles. Use this menu to set the <Mode>.
<Normal> under the menu is the basic subtitle and <Hard of hearing> is the subtitle for a hearingimpaired person.
• <Subtitle>
Switches subtitles on or off.
• <Mode>
Sets the subtitle mode.
•
<Normal> / <Hard of hearing>
• <Subtitle Language>
Set the subtitle language.
• If the programme you are watching does not support the <Hard of hearing> function, <Normal>
automatically activates even though <Hard of hearing> mode is selected.
• English is the default in cases where the selected language is unavailable in the broadcast.
• You can select these options simply by pressing the [SUBT]. button on the remote control.
Teletext Language
You can set the Teletext language by selecting the language type.
English is the default in cases where the selected language is unavailable in the broadcast.
3-5
Using the Product
MENU
Preference
DESCRIPTION
<Primary Audio Language> / <Secondary Audio Language> / <Primary Subtitle Language> /<Secondary Subtitle Language> / <Primary Teletext Language> /<Secondary Teletext Language>
Using this feature, users can select one of the languages. The language selected here is the default
when the user selects a channel.
If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the Language menu are automatically changed to the selected language.
The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a
list of languages supported by the current channel and the selection is highlighted.
If you change this language setting, the new selection is only valid for the current channel. The
changed setting does not change the setting of the Primary Subtitle Language, Primary Audio Language, or the Primary Teletext Language of the Preference menu.
Digital Text
If the programme is broadcast with digital text, this feature is enabled.
• <Disable>-<Enable> (UK only)
• MHEG (Multimedia and Hypermedia Information Coding Experts Group)
• An International standard for data encoding systems used in multimedia and hypermedia. This is at a
higher level than the MPEG system which includes data-linking hypermedia such as still images,
character service, animation, graphic and video files as well as multimedia data. MHEG is user
runtime interaction technology and is being applied to various fields including VOD (Video-OnDemand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing,
digital libraries and network games.
Light Level
Light Level is to automatically detect distribution of inputted visual signal and adjust to create optimum brightness.
Melody
A melody sound can be set to come on when the monitor is powered On or Off.
• <Off> - <Low> - <Medium> - <High>
The <Melody> does not play
• When no sound is output from the TV because the [MUTE] button has been pressed.
• When no sound is output from the TV because the volume has been reduced to minimum with the
volume [-] button
• When the TV is turned off by <Sleep Timer> function
Energy Saving
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching
TV at night, set the <Energy Saving> mode option to <High> to reduce eye fatigue as well as power
consumption.
Press the [TOOLS] button to display the <Tools> menu. You can also set the <Energy Saving>
option by selecting <Tools> → <Energy Saving>.
• <Off> : Turns off the energy saving function.
• <Low> : Sets the TV to low energy saving mode.
• <Medium> : Sets the TV to medium energy saving mode.
• <High> : Sets the TV to high energy saving mode.
• <Auto> : Automatically adjusts the brightness of the TV screen in accordance with the scenes.
Common Interface
• <CI Menu>
This enables the user to select from the CAM-provided menu.
Select the CI Menu based on the menu PC Card.
• <Application Info.>
This contains information on CAM inserted in the CI slot and displays it.
The Application Info inserting is about the CI CARD. You can install the CAM anytime whether the
TV is ON or OFF.
Using the Product
3-5
Input
MENU
Source List
DESCRIPTION
Use to select <PC>, <TV> or an external input source connected to the Monitor.Use to select the
screen of your choice.
You can use the [SOURCE] button on the remote control.
• <PC> - <DVI> - <TV> - <Ext.> - <Component> - <HDMI1> - <HDMI2>
Edit Name
Name the input device connected to the input jacks to make your input source selection easier.
<VCR> - <DVD> - <Cable STB> - <Satellite STB> - <PVR STB> - <AV Receiver> - < Game> -<Camcorder> - <PC> - <DVI PC> - <DVI> - <TV> - <IPTV> - <Blu-Ray> - <HD DVD> - <DMA>
Anynet+ (HDMI-CEC)
What is <Anynet+>?
<Anynet+> is a function that enables you to control all connected Samsung devices that
support <Anynet+> with your Samsung TV‘s remote. The <Anynet+ > system can be used only
with Samsung devices that have the <Anynet+> feature. To be sure your Samsung device
has this feature, check if there is an <Anynet+> logo on it.
Connecting Anynet+ Devices
1. Connect the [HDMI IN] jack on the TV and the HDMI OUT jack of the corresponding <Anynet+> device using an HDMI
cable.
2. Connect the [HDMI IN] jack of the home theatre and the HDMI OUT jack of the corresponding <Anynet+> device using an
HDMI cable.
3-5
Using the Product
Connect the Optical cable between the [DIGITAL AUDIO OUT (OPTICAL)] jack on your TV and the Digital Audio Input
on the Home Theatre.
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the
Home Theatre‘s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the
[DIGITAL AUDIO OUT (OPTICAL)] jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or
Home Theatre, not the TV.
Connect only one Home Theatre.
You can connect an <Anynet+> device using the HDMI 1.3 cable. Some HDMI cables may not support <Anynet+>
functions.
<Anynet+> works when the AV device supporting <Anynet+> is in the Standby or On status.
<Anynet+> supports up to 10 AV devices in total. Note that you can connect up to 3 devices of the same type.
Setting Up Anynet+
Press the [TOOLS] button to display the <Tools> menu. You can also display the <Anynet+> menu by selecting <Tools>
→ <Anynet+ (HDMI-CEC)>
Using the Product
3-5
MENU
Device List
DESCRIPTION
1. Press the [TOOLS] button. Press the [
2. Press the
or
] button to select <Anynet+ (HDMI-CEC)>.
button to select <Device List>, then press the [
] button.
- <Anynet+> devices connected to the TV are listed.
- If you cannot find a device you want, press the red button to scan for devices.
3. Press the or
selected device.
button to select a particular device and press the [
] button. It is switched to the
- <Anynet+ (HDMI-CEC)> must be set to On in the <Application> menu for the <Device List> menu
to appear.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation
during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically searches the device list when the TV is turned on via the power
button, devices connected to the TV may not always be automatically displayed in the device
list. Press the red button to search for the connected device.
If you have selected external input mode by pressing the [SOURCE] button, you cannot use the
<Anynet+> function. Make sure to switch to an <Anynet+> device by using the <Device List>.
Setup
• <Anynet+ (HDMI-CEC)>
To use the <Anynet+> Function, <Anynet+ (HDMI-CEC)> must be set to On.
When the <Anynet+ (HDMI-CEC) >function is disabled, all the< Anynet+> related operations
are deactivated.
• <Auto Turn Off>
Setting an <Anynet+> Device to turn Off automatically when the TV is turned off.
The active source on the TV remote must be set to TV to use the <Anynet+> function.
If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is
turned off. If an external device is still recording, it may or may not turn off.
Support
3-5
Using the Product
MENU
Self Diagnosis
DESCRIPTION
• <Picture Test>
If you think you have a picture problem, perform the picture test. Check the colour pattern on the
screen to see if the problem still exists.
•
<Yes> : If the test pattern does not appear or there is noise in the test pattern, select <Yes>.
There may be a problem with the TV. Contact Samsung‘s call centre for assistance.
•
<No> : If the test pattern is properly displayed, select <No>. There may be a problem with your
external equipment. Please check your connections. If the problem still persists, refer to the
external device‘s user manual.
• <Sound Test>
If you think you have a sound problem, please perform the sound test. You can check the sound by
playing a built-in melody sound through the TV.
•
<Yes> : If during the sound test you can hear sound only from one speaker or not at all, select
<Yes>. There may be a problem with the TV. Contact Samsung’s call center for assistance.
•
<No> : If you can hear sound from the speakers, select <No>. There may be a problem with
your external equipment. Please check your connections. If the problem still persists, refer to
the external device’s user manual.
•If you hear no sound from the TV‘s speakers, before performing the sound test, make sure
<Speaker Select > is set to <TV speaker> in the <Sound> menu.
•The melody will be heard during the test even if <Speaker Select> is set to <External
Speaker> or the sound is muted by pressing the [MUTE] button.
• <Signal Information> (digital channels only)
Unlike analogue channels, which can vary in reception quality from snowy to clear, digital (HDTV)
channels have either perfect reception quality or you will not receive them at all. So, unlike
analogue channels, you cannot fine tune a digital channel. You can, however, adjust your antenna
to improve the reception of available digital channels
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to
increase the signal strength. Continue to adjust the antenna until you find the best position
with the strongest signal.
Software Upgrade
• <By USB>
Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being
applied. The TV will turn off and turn on automatically after completing the firmware upgrade.
Please check the firmware version after the upgrades are complete (the new version will have a
higher number than the older version).
When software is upgraded, video and audio settings you have made will return to their default
(factory) settings. We recommend you write down your settings so that you can easily reset them
after the upgrade.
• <By Channel>
Upgrades the software using the broadcasting signal.
• <Standby Mode Upgrade>
To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45
minutes after entering standby mode, a manual upgrade is automatically conducted. Since the
power of the unit is turned on internally, the screen may be on slightly for the LED product. This
phenomenon may continue for more than 1 hour until the software upgrade is completed.
• <Alternative Software>(Backup)
If there is an issue with the new firmware and it is affecting operation, you can change the software
to the previous version.
Using the Product
•
If software was changed, existing software is displayed.
•
You can change current software to alternative software by ‘Alternative Software’.
3-5
MENU
DESCRIPTION
HD Connection Guide
This menu presents the connection method that provides the optimal quality for the HDTV. Refer to
this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software. You can view the information regarding the call centrer, product and software file download
method.
3-5
Using the Product
3-6
Installing the Device Driver
If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is
included on the CD supplied with the product. If the supplied drive file is corrupted, please visit the Samsung Electronics
website (www.samsung.com), and download the driver.
1. Insert the driver installation CD into the CD-ROM drive.
2. Click on Windows Driver
3. Select the model of your product from the model list.
4. Complete the remaining installation steps according to the instructions displayed on the screen.
5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information,
refer to the document about the Windows operating system.
Using the Product
3-6
3-7
Standard Signal Mode Table
An LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent
characteristics of the panel, unlike a CDT monitor.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows referring to the User Manual of the graphics card.
RESOLUTION
HORIZONTAL
FREQUENCY
(KHZ)
VERTICAL
FREQUENCY
(HZ)
CLOCK
FREQUENCY
(MHZ)
POLARITY (H/V)
IBM, 640 x 350
31.469
70.086
25.175
+/-
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 X 800
49.702
59.810
83.500
-/+
VESA, 1280 X 800
62.795
74.934
106.500
-/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1440 x 900
70.635
74.984
136.750
-/+
VESA, 1600 x 900
60.000
60.000
108.000
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
3-7
Using the Product
4
Installing the Software
4-1
Natural Color
What is Natural Color ?
This software is for Samsung products only and enables you to adjust the displayed colors on the product so they more closely
match the colors of printed pictures. For more information, refer to the online help of the software (F1).
Natural Color is provided online. You can download it from the website below and install;
http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html
4-2
MultiScreen
What is MultiScreen ?
MultiScreen enables you to partition multiple sections on the Monitor.
Installing the Software
1. Insert the installation CD into the CD-ROM drive.
2. Select the MultiScreen setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the
MultiScreen setup file on the CD-ROM.
3. When the Installation Wizard appears, click [Next].
4. Complete the remaining software installation steps according to the instructions displayed on the screen.
• The software may not work properly if you do not restart the computer after the installation.
• The MultiScreen icon may not appear depending on the computer system and the product specifications.
• If the shortcut icon does not appear, press the F5 key.
MultiScreen Installation Requirements
The MultiScreen installation may be affected by the graphics card, motherboard and the networking environment.
Operating System
OS
• Windows 2000
• Windows XP Home Edition
• Windows XP Professional
• Windows Vista
Installing the Software
4-1
For MultiScreen, Windows 2000 or later operating systems are recommended.
Hardware
• At least 32MB of memory
• At least 60MB of free space on the hard disk drive
Removing the Software
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs].
Select MultiScreen from the program list and click the [Add/Delete] button.
4-2
Installing the Software
5
Troubleshooting
5-1
Monitor Self-Diagnosis
• You can check if the product is working properly using the Self-Diagnosis function.
1. Turn the product and the PC off.
2. Remove the D-Sub cable from the product.
3. Turn the product on.
4. If the product is working properly, the 'Check cable connection' message appears.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection.
Troubleshooting
5-1
5-2
Before Requesting Service
Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest
Samsung Electronics Service Center.
PROBLEMS RELATED TO INSTALLATION (PC MODE)
The monitor screen flickers.
Check if the signal cable between the computer and the monitor is securely
connected and tightened.
(Refer to Connecting to a Computer)
PROBLEMS RELATED TO SCREEN
Screen is blank and power indicator is off.
Ensure that the power cord is firmly connected and the LCD monitor is on.
(Refer to Connecting to a Computer)
Ensure that the signal cable is firmly connected to the PC or video sources.
"Check Signal Cable” message
(Refer to Connecting to a Computer)
"Not Optimum Mode" message
Check the maximum resolution and the frequency of the video adapter.
Compare these values with the data in the Preset Timing Modes Chart.
Picture rolls vertically.
Check if the signal cable is securely connected.Connect it again securely.
(Refer to Connecting to a Computer)
Image is not clear. Picture is blurred.
Run Frequency <Coarse > and < Fine> tuning.
Turn on again after removing all accessories(video extension cable, etc.)
Set resolution and frequency to the recommended ranges.
Picture image is unstable and vibrates.
Ghost images are shown in the picture.
The image is too light or too dark
Check if the resolution and frequency set for the computer video card falls
in the range supported by the monitor. If not, reset them referring to the
current <Information> under the monitor menu and Preset Timing Modes.
Adjust the Brightness and Contrast
(Refer to the <Brightness>, <Contrast>)
Screen is blank and the power indicator light
blinks every 0.5 or 1 seconds
The monitor is using its power management system
The screen is blank and is blinking.
If you see the TEST GOOD message on the screen when you press the [
MENU] button, check the cable connection between the monitor and the
computer to ensure that the connector is properly connected.
Press a key on the keyboard
PROBLEMS RELATED TO AUDIO
No sound
Ensure that the audio cable is firmly connected to both the audio-in port on
your monitor and the audio-out port on your sound card.
(Refer to Connecting to a Computer)
Check the volume level.
The sound level is too low.
Check the volume level.
If the volume is still too low after turning the control to its maximum, check
the volume control on the computer sound card or software program.
PROBLEMS RELATED TO REMOTE CONTROL
The remote control buttons do not respond.
Check the battery polarities (+/-).
Check if the batteries have been exhausted.
Check if the power is on.
Check if the power cord is securely connected.
Check if a special fluorescent or neon lamp is on in the vicinity
5-2
Troubleshooting
NOTE ON THE PRODUCT APPEARANCE
You may see small particles if you look closely at
the edge of the bezel surrounding the screen.
Troubleshooting
This is part of the product's design and is not a defect.
5-2
5-3
FAQ
FAQ
PLEASE TRY THE FOLLOWING!
How can I change the frequency of the video signal?
You have to change the frequency of the graphics card.
How can I change the resolution?
Windows XP: Change the resolution by selecting Control Panel → Appearance and Themes → Display → Settings.
(For more information, refer to the User Manual of the computer or the
graphics card.)
Windows ME/2000 : Change the resolution by selecting Control Panel →
Appearance and Themes → Display → Settings.
(For more information, refer to the User Manual of the computer or the
graphics card.)
How can I use the power saving function?
Windows XP: Configure it by selecting Control Panel → Appearance and
Themes → Display → Screen Saver Settingor configure it in the BIOS
SETUP of the computer.
Windows ME/2000 : Configure it by selecting Control Panel → Appearance
and Themes → Display → Screen Saver Settingor configure it in the BIOS
SETUP of the computer.
For more information, refer to the Windows user manual for the computer.
How can I clean the outer case/LCD Panel?
Disconnect the power cord and then clean the monitor with a soft cloth,
using either a plain water.
Do not leave any detergent or scratches on the case.
Do not let any water enter the monitor.
What are the benefits of digital broadcasting?
Digital TV broadcasting generates less noise and provides clearer visuals
and sound than analog TV broadcasting does. As services develop, you
can also enjoy various information services because various kinds of data
besides video and audio can be sent.
For example, while watching a sports game, you can view information on
your favorite player or you can view all or selected screens which have
been captured from different angles for a specific scene. In addition, you
can receive information on a previous story or drama or you can buy home
shopping products such as an accessory currently on TV.
Digital TV broadcasting allows you to easily access various information
services in your home creating a more information-oriented home.
What is the difference between HDTV and
SDTV?
There are various types of digital TVs.
The most widely known types of digital TV are HDTV and SDTV. They are
classified according to the screen quality and the video specifications.
• HDTV (High Definition TV):High screen quality, very clear TV.
• SDTV (Standard Definition TV):Common standard digital TV.
An SDTV has an aspect ratio of 4:3 which is the same as that of an analog
TV. SDTV has an aspect ratio of 16:9 which is similar to a cinema screen.
This provides a much better screen quality than SDTV. It's like having a
theater in your home.
Digital TV broadcasting in our country is ultimately orientated towards
HDTV. (At present, all digital TVs from Samsung Electronics have the 16:9
wide aspect ratio.)
5-3
Troubleshooting
FAQ
Can I watch HD broadcasting with all digital
TVs?
PLEASE TRY THE FOLLOWING!
You can receive all digital broadcasts, whether they are SD or HD, using
any digital TV. However, you cannot enjoy HD programs, which are the
highest quality digital TV programs, using an SD digital TV. Especially, as
SD broadcasting has an aspect ratio of 4:3, HD broadcasting has an
aspect ratio of 16:9, similar to a cinema screen. Therefore, to enjoy the full
benefits of digital TV, it is better to purchase an HD digital TV.
(At present, all digital TVs from Samsung Electronics have the 16:9 wide
aspect ratio.)
Can I watch digital TV broadcasting with an analog TV?
No.
Can I use my present antenna to receive digital
broadcasting?
As for existing analog TV, digital TV is designed so that digital broadcasting signals are received via both indoor and outdoor antennas.
The analog TV cannot interpret digital signals. Therefore, a digital TV is
required to watch digital TV broadcasting.
If signal reception is very good in your environment, you can watch digital
broadcasts with your existing indoor antenna. If not, it is better to install an
outdoor antenna.
Troubleshooting
5-3
6
More Information
6-1
Specifications
MODEL NAME
LCD Panel
Synchronization
Screen Size
20 inch (50 cm)
Display Area
442.8 mm (H) X 249.2 mm (V)
Pixel Pitch
0.2768 mm (H) X 0.2768 mm (V)
Horizontal Frequency
30~81 kHz
Vertical Frequency
56~75 Hz
Color
Resolution
2033HD
16.7M
Optimal Resolution
1600x900 @ 60 Hz
Maximum Resolution
1600x900 @ 60 Hz
RGB analog, DVI (Digital Visual Interface)
Input Signal, when a terminator is
installed.
0.7 Vp-p ± 5 %
Separate Type H/V Sync, Composite
TTL Level (V high ≥ 2.0 V, V low ≤ 0.8 V)
Maximum Pixel Clock
108.000 MHz (Analog, Digital)
Power Voltage
AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz
Dimension (Width x Height x
Depth) / Weight
487.8 X 373.7 X 177.0 mm (19.2 x 14.7 x 7.0) inch (With Stand) / 5.0 kg ( 11.0 Ibs)
VESA Mounting Interface
75 mm x 75 mm (2.95 x 2.95 inches)
Environmental
considerations
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Operating
487.8 X 323.8 X 70.5 mm ( 19.2 x 12.7 x 2.8 inch) (Without Stand)
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Class B (Information Communication Equipment for Home Use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment
emits less electromagnetic waves than Class A equipment.)
6-1
More Information
6-2
Power Saving Function
This product provides a power saving function that automatically turns the screen off when the product is not used for a
predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a
different color to indicate that the product is in power saving mode.
When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key
or clicking the mouse. However, the power saving function only works when the product is connected to a computer that provides
the power saving function.
POWER SAVING
FUNCTION
NORMAL OPERATION
POWER SAVING MODE
POWER OFF (POWER
BUTTON)
Power LED
On
Blinks
Off
Power Consumption
51 watts
less than 2 watts
less than 1 watts
If there is no power cut-off switch, the power consumption is “0” only when the power cord is disconnected.
This product satisfies the ENERGY STAR® specifications.
More Information
6-2
6-3
Contact SAMSUNG WORLDWIDE
►If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG(726-7864)
http://www.samsung.com/us
CANADA
1-800-SAMSUNG(726-7864)
http://www.samsung.com/ca
MEXICO
01-800-SAMSUNG(726-7864)
http://www.samsung.com/mx
LATIN AMERICA
ARGENTINE
0800-333-3733
http://www.samsung.com/ar
BRAZIL
0800-124-421
http://www.samsung.com/br
4004-0000
CHILE
800-SAMSUNG(726-7864)
http://www.samsung.com/cl
COLOMBIA
01-8000112112
http://www.samsung.com/co
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin
ECUADOR
1-800-10-7267
http://www.samsung.com/latin
EL SALVADOR
800-6225
http://www.samsung.com/latin
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin
HONDURAS
800-7919267
http://www.samsung.com/latin
JAMAICA
1-800-234-7267
http://www.samsung.com/latin
NICARAGUA
00-1800-5077267
http://www.samsung.com/latin
PANAMA
800-7267
http://www.samsung.com/latin
PUERTO RICO
1-800-682-3180
http://www.samsung.com/latin
REP. DOMINICA
1-800-751-2676
http://www.samsung.com/latin
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
http://www.samsung.com/latin
VENEZUELA
0-800-100-5303
http://www.samsung.com/latin
EUROPE
AUSTRIA
0810 - SAMSUNG(7267864,€ 0.07/min)
http://www.samsung.com/at
BELGIUM
02 201 2418
http://www.samsung.com/be (Dutch)
http://www.samsung.com/be_fr
(French)
CZECH REPUBLIC
800 - SAMSUNG (800-726786)
http://www.samsung.com/cz
DENMARK
8 - SAMSUNG (7267864)
http://www.samsung.com/dk
EIRE
0818 717 100
http://www.samsung.com/ie
FINLAND
30 - 6227 515
http://www.samsung.com/fi
FRANCE
01 4863 0000
http://www.samsung.com/fr
GERMANY
01805 - SAMSUNG (7267864,€ 0.14/
Min)
http://www.samsung.de
6-3
More Information
EUROPE
HUNGARY
06-80-SAMSUNG(726-7864)
http://www.samsung.com/hu
ITALIA
800-SAMSUNG(726-7864)
http://www.samsung.com/it
LUXEMBURG
02 261 03 710
http://www.samsung.com/lu
NETHERLANDS
0900 - SAMSUNG (0900-7267864) (€
0.10/Min)
http://www.samsung.com/nl
NORWAY
3 - SAMSUNG (7267864)
http://www.samsung.com/no
POLAND
0 801 1SAMSUNG (172678)
http://www.samsung.com/pl
022 - 607 - 93 - 33
PORTUGAL
808 20 - SAMSUNG (7267864)
http://www.samsung.com/pt
SLOVAKIA
0800-SAMSUNG(726-7864)
http://www.samsung.com/sk
SPAIN
902 - 1 - SAMSUNG (902 172 678)
http://www.samsung.com/es
SWEDEN
075 - SAMSUNG (726 78 64)
http://www.samsung.com/se
SWITZERLAND
0848-SAMSUNG(7267864, CHF 0.08/
min)
http://www.samsung.com/ch
U.K
0845 SAMSUNG (7267864)
http://www.samsung.com/uk
CIS
ESTONIA
800-7267
http://www.samsung.com/ee
LATVIA
8000-7267
http://www.samsung.com/lv
LITHUANIA
8-800-77777
http://www.samsung.com/lt
KAZAKHSTAN
8-10-800-500-55-500
http://www.samsung.com/kz_ru
KYRGYZSTAN
00-800-500-55-500
RUSSIA
8-800-555-55-55
TADJIKISTAN
8-10-800-500-55-500
UKRAINE
8-800-502-0000
http://www.samsung.ua
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com/kz_ru
http://www.samsung.ru
ASIA PACIFIC
AUSTRALIA
1300 362 603
http://www.samsung.com/au
CHINA
800-810-5858
http://www.samsung.com/cn
400-810-5858
010-6475 1880
INDIA
HONG KONG:3698 - 4698
http://www.samsung.com/hk
3030 8282
http://www.samsung.com/in
1800 110011
1-800-3000-8282
INDONESIA
0800-112-8888
http://www.samsung.com/id
JAPAN
0120-327-527
http://www.samsung.com/jp
MALAYSIA
1800-88-9999
http://www.samsung.com/my
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com/nz
More Information
6-3
ASIA PACIFIC
PHILIPPINES
1800-10-SAMSUNG(726-7864)
http://www.samsung.com/ph
1800-3-SAMSUNG(726-7864)
02-5805777
SINGAPORE
1800-SAMSUNG(726-7864)
http://www.samsung.com/sg
THAILAND
1800-29-3232
http://www.samsung.com/th
02-689-3232
TAIWAN
0800-329-999
http://www.samsung.com/tw
VIETNAM
1 800 588 889
http://www.samsung.com/vn
MIDDLE EAST & AFRICA
SOUTH AFRICA
0860-SAMSUNG(726-7864)
http://www.samsung.com/za
TURKEY
444 77 11
http://www.samsung.com/tr
U.A.E
800-SAMSUNG(726-7864)
http://www.samsung.com/ae
8000-4726
6-3
More Information
6-4
Correct Disposal
CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)
(Applicable in the European Union and other European countries with separate collection
systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from
other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other
commercial wastes for disposal.
CORRECT DISPOSAL OF BATTERIES IN THIS PRODUCT - EUROPE ONLY
(Applicable in the European Union and other European countries with separate battery return
systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product
should not be disposed of with other household waste at the end of their working life. Where
marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly
disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from
other types of waste and recycle them through your local, free battery return system.
The rechargeable battery incorporated in this product is not user replaceable. For
information on its replacement, please contact your service provider.
More Information
6-4
6-4
More Information
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement