StarTech.com 1Port ExpressCard eSATA Card Installation guide

Add to my manuals
1 Pages

advertisement

StarTech.com 1Port ExpressCard eSATA Card Installation guide | Manualzz

ECESATUSB1

1 Port ExpressCard Power eSATA Controller

Adapter Card

Installation Guide

Packaging Contents

• 1 x ECESATUSB1 adapter card

• 1 x Driver CD

• 1 x Installation Guide

System Requirements

• An ExpressCard enabled computer system

• Microsoft Windows ® 2000/XP/Vista, Mac OS ® 10.5.x,

Red Hat ® Enterprise Linux ® 4 Update 2 , SUSE ® Linux

Enterprise 9.0 SP2

2. Under the “SCSI and RAID Controllers” (2000/XP) or

“Storage Controllers” (Vista) category, you should see a device called Silicon Image SiI3132.

3. Right-click on that device and select Properties, and under Device Status is should say it’s working properly.

Using the ECESATUSB1 Card

The Power eSATA port is a specially designed connector that will allow you to connect either an eSATA connector or USB type A connector into the same port. Both eSATA and USB can be used simultaneously, through adapters

(ie. StarTech.com ID: ESATAUSBBO).

Installation

1. The ECESATUSB1 card will fit into any ExpressCard/34 or ExpressCard/54 slot. Push the card into slot, until it “clicks”. See your laptop’s documentation for more specific information on plugging ExpressCard adapter cards into the slot.

2. After the card is inserted into the ExpressCard slot,

Windows should automatically detect new hardware.

The Found New Hardware wizard should appear.

3.

4.

When prompted, insert the included driver CD into your computer and Windows should automatically start searching the CD. Otherwise click “Next” to proceed.

Follow any on screen prompts, until the card is successfully installed.

Verifying Installation For Windows 2000/XP/Vista

1. From the main desktop, right-click on My Computer, then select Manage. In the new Computer Management window, select Device Manager from the left window panel.

Power eSATA cables (ie. StarTech.com ID: ESATAUSB3) are also available that provide eSATA data and 5V power over a single cable for compatible Power eSATA devices

(2.5” HDD only).

Compatible with eSATA Flash Drives.

Specifications

Bus Interface

Form Factor

Connectors

Chipset

LED

Maximum Data Transfer

Rate

Compatible Operating

Systems

ExpressCard 1.0

ExpressCard/34

1 x Power eSATA

(eSATA+USB)

Silicon Image SiI3132

1 x eSATA Activity eSATA: 3 Gb/s

USB: 480 Mb/s

Windows 2000/XP/Vista,

Mac OS 10.5.x, Red Hat

Enterprise Linux 4 Update

2 , SUSE Linux Enterprise

9.0 SP2

Warranty Information

This product is backed by a one year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Host interface: ExpressCard
  • Output interface: ExpressCard
  • Black, Grey

Related manuals

Download PDF

advertisement