User manual | Tranquility® 20 (TS) Series Submittal Data

Tranquility® 20
(TS) Series
Submittal Data
Models TSD/H/V 006 - 070
60Hz - HFC-410A
English Language/I-P Units
SUBMITTAL DATA - I-P UNITS
Unit Designation:
Job Name:
Architect:
Engineer:
Contractor:
PERFORMANCE DATA
Cooling Capacity:
Btuh
EER:
Rev.: 23 October, 2015
Heating Capacity:
Btuh
COP:
Ambient Air Temp:
°F
Entering Water Temp (Clg):
°F
Entering Air Temp (Clg):
°F
Entering Water Temp (Htg):
°F
Entering Air Temp (Htg):
°F
Airflow:
CFM
Fan Speed or Motor/RPM/Turns:
Operating Weight:
(lb)
ELECTRICAL DATA
Power Supply:
Volts
Phase
Minimum Circuit Ampacity:
ClimateMaster works continually to improve its products. As a result, the design and specifications of each
product at the time of order may be changed without notice and may not be as described herein. Please contact
ClimateMaster's Customer Service Department at 1-405-745-6000 for specific information on the current design and
specifications. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely ClimateMaster's opinion or commendation of its products.
The latest version of this document is available at climatemaster.com.
*LC377*
LC377
Rev.:23 October,2015
Maximum Overcurrent Protection:
Hz
Tranquility® 20
(TS) Series
Submittal Data
Models TSD/H/V 006 - 070
60Hz - HFC-410A
English Language/S-I Units
SUBMITTAL DATA - S-I UNITS
Unit Designation:
Job Name:
Architect:
Engineer:
Contractor:
PERFORMANCE DATA
Cooling Capacity:
kW
EER:
Rev.: 23 October, 2015
Heating Capacity:
kW
COP:
Ambient Air Temp:
°C
Entering Water Temp (Clg):
°C
Entering Air Temp (Clg):
°C
Entering Water Temp (Htg):
°C
Entering Air Temp (Htg):
°C
Airflow:
l/s
Fan Speed or Motor/RPM/Turns:
Operating Weight:
(kg)
ELECTRICAL DATA
Power Supply:
Volts
Phase
Minimum Circuit Ampacity:
ClimateMaster works continually to improve its products. As a result, the design and specifications of each
product at the time of order may be changed without notice and may not be as described herein. Please contact
ClimateMaster's Customer Service Department at 1-405-745-6000 for specific information on the current design and
specifications. Statements and other information contained herein are not express warranties and do not form the
basis of any bargain between the parties, but are merely ClimateMaster's opinion or commendation of its products.
The latest version of this document is available at climatemaster.com.
*LC377*
LC377
Rev.: :23 October,2015
Maximum Overcurrent Protection:
Hz
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Table of Contents
*Page Number
Unit Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Selection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
TS Series Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Performance Data – AHRI/ASHRAE/ISO 13256-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Performance Data – Selection Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Performance Data – TS H/V 006A (PSC Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Performance Data – TS H/V 009B (PSC Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Performance Data – TS H/V 012A (PSC Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Performance Data – TS H/V/D 018B (PSC Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Performance Data – TS H/V/D 018B (ECM Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Performance Data – TS H/V/D 024 (PSC Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Performance Data – TS H/V/D 024 (ECM Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Performance Data – TS H/V/D 030 (PSC Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Performance Data – TS H/V/D 030 (ECM Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Performance Data – TS H/V/D 036 (PSC Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Performance Data – TS H/V/D 036 (ECM Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Performance Data – TS H/V/D 042 (PSC Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Performance Data – TS H/V/D 042 (ECM Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Performance Data – TS H/V/D 048 (PSC Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Performance Data – TS H/V/D 048 (ECM Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Performance Data – TS H/V/D 060 (PSC Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Performance Data – TS H/V/D 060 (ECM Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Performance Data – TS H/V/D 070 (PSC Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Performance Data – TS H/V/D 070 (ECM Blower) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Air Flow Correction Table - Units with PSC Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Air Flow Correction Table - Units with ECM Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Entering Air Correction Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Correction Tables - Antifreeze and Water Pressure Drop Adder for Options . . . . . . . . . . . . . 32
Blower Performance Data – Standard Unit - No Reheat (PSC Motor) . . . . . . . . . . . . . . . . . . . 33
Blower Performance Data – Units with ClimaDry® (PSC Motor) . . . . . . . . . . . . . . . . . . . . . . . . 34
ECM Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Blower Performance Data – (ECM Motor) - Standard Unit - No Reheat . . . . . . . . . . . . . . . . . . 38
ClimaDry® II Option - Benefits and Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
ClimaDry® II Option - Sequence of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Physical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
TS - Horizontal – Dimensional Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
TS - Horizontal Service Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
TS - Vertical Upflow – Dimensional Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
TS - Vertical Service Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
TS - Vertical Downflow – Dimensional Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Corner Weights for TSH Series Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Electrical Data – PSC Motor & ClimaDry® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Electrical Data – High Static PSC Motor & ClimaDry® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Electrical Data – ECM Motor & ClimaDry® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Electrical Data – PSC Motor & Secondary Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Electrical Data – High Static PSC Motor & Secondary Pump . . . . . . . . . . . . . . . . . . . . . . . . . 57
Electrical Data – ECM Motor & Secondary Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
TS Series Wiring Diagram Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Typical Wiring Diagram – Single Phase TS Units with CXM Controller . . . . . . . . . . . . . . . . . . . 60
Typical Wiring Diagram – Three Phase TS Units with DXM Controller . . . . . . . . . . . . . . . . . . . . 61
Typical Wiring Diagram – Three Phase TS Units with CXM Controller and ECM Blower . . . . . . . 62
Typical Wiring Diagram – Single Phase TS Units with CXM, MPC, and ECM Controller . . . . . . . . 63
Typical Wiring Diagram – Single Phase TS Units with ClimaDry® II and ECM Blower . . . . . . . . . 64
Engineering Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Revision Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
*Document page number is shown next to part number (e.g. LC377 - 3 = page 3). Since not all pages are typically used in
the submittals process, the page number in the lower right corner can still be used (page ____of_____).
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 3
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Unit Features
THE TRANQUILITY® 20 SINGLE-STAGE (TS) SERIES
UNIT FEATURES
The award winning Tranquility Series raises the bar
for water-source heat pump efficiencies, features and
application flexibility. Not only does the Tranquility® 20
far exceed ASHRAE 90.1 efficiencies, but it also uses
EarthPure® (HFC-410A) zero ozone depletion refrigerant,
making it an extremely environmentally-friendly option.
Tranquility® 20 is eligible for additional LEED® (Leadership
in Energy and Environmental Design) points because of the
“green” technology design.
•
•
•
•
®
Available in sizes 1/2 tons (1.76 kW) through 6 tons (21.1
kW) with multiple cabinet options (vertical upflow, vertical
downflow and horizontal) the Tranquility® 20 offers a wide
range of units for most any installation. The Tranquility® 20
has an extended range refrigerant circuit, capable of ground
loop (geothermal) applications as well as water loop (boilertower) applications. Standard features are many. Copeland
scroll compressors, microprocessor controls, galvanized
steel cabinet, polyester powder coat paint, stainless steel
drain pan and foil-backed air handler insulation are just
some of the features of the Tranquility® 20 Series.
ClimateMaster’s exclusive double isolation compressor
mounting system makes the Tranquility® 20 the quietest
unit on the market. Compressors are mounted on specially
engineered sound tested EPDM grommets to a heavy
gauge mounting plate, which is then isolated from the
cabinet base with rubber grommets for maximized
vibration/sound attenuation. The unique low profile slanted
control box makes installing and maintaining the unit
easier than any other water-source heat pump currently in
production.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Sizes 006 (1/2 ton, 1.76 kW) through 070 (6 tons, 21.1 kW)
EarthPure® (HFC-410A) refrigerant
Exceeds ASHRAE 90.1 efficiencies
Galvanized steel construction with attractive black mat
polyester powder coat paint and silver accents
Stainless steel drain pan
Foil-backed insulation in air handler section
Unique double isolation compressor mounting with
vibration isolation for quiet operation
Insulated divider and separate compressor/air
handler compartments
Copeland scroll compressors
TXV metering device
Extended range (20 to 120°F, -6.7 to 48.9°C) operation
Microprocessor controls standard (optional DXM and/or
DDC controls)
LonWorks, BACnet, Modbus and Johnson N2
compatibility options for DDC controls
Field convertible discharge air arrangement for
horizontal units
High static blowers available
ECM variable speed fan motor available
Low profile slanted control box for easy access
Flush securely-mounted corner post water connections
(no backup wrench required)
Unit Performance Sentinel performance
monitoring system
Eight Safeties Standard
Wide variety of options including ClimaDry® modulating
reheat, coated air coils and internal pumps
Options such as ECM variable speed fan motor, coated air
coil, DDC controls, internal pump and high efficiency MERV
11 two-inch (51mm) air filters allow customized design
solutions. Optional high static fan motors help overcome
some of the challenges associated with ductwork for retrofit
installations.
The Tranquility® 20 (TS) Series Water-Source Heat Pumps are
designed to meet the challenges of today’s HVAC demands
with one of the most innovative products available on the
market.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 4
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Selection Procedure
Reference Calculations
Heating
Cooling
LWT = EWT -
HE
GPM x 500
LWT = EWT +
LAT = EAT +
HC
CFM x1.08
LAT (DB) = EAT (DB) -
HR
GPM x 500
LC = TC - SC
SC
CFM x1.08
S/T =
SC
TC
Legend and Glossary of Abbreviations
BTUH = BTU( British Thermal Unit) per hour
CFM = airflow, cubic feet/minute
COP = coefficient of performance = BTUH output/BTUH input
DB = dry bulb temperature °F
EAT = entering air temperature, Fahrenheit (dry bulb/wet bulb)
EER = energy efficiency ratio = BTUH output/Watt input
MPT = male pipe thread
ESP = external static pressure (inches w.g.)
EWT = entering water temperature
GPM = water flow in U.S. gallons/minute
HE = total heat of extraction, BTUH
HC = air heating capacity, BTUH
HR = total heat of rejection, BTUH
HWC
FPT
KW
LAT
LC
LWT
MBTUH
S/T
SC
TC
WB
WPD
= hot water generator (desuperheater) capacity, Mbtuh
= female pipe thread
= total power unit input, kilowatts
= leaving air temperature, °F
= latent cooling capacity, BTUH
= leaving water temperature, °F
= 1000 BTU per hour
= sensible to total cooling ratio
= sensible cooling capacity, BTUH
= total cooling capacity, BTUH
= wet bulb temperature °F
= waterside pressure drop (psi & ft. of hd.)
Conversion Table - to convert inch-pound (English) to S-I (Metric)
Air Flow
Water Flow
Ext Static Pressure
Water Pressure Drop
Airflow (L/s) = CFM x 0.472
Water Flow (L/s) = gpm x 0.0631
ESP (Pa) = ESP (in of wg) x 249
PD (kPa) = PD (ft of hd) x 2.99
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 5
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Selection Procedure
Step 1 Determine the actual heating and cooling loads at the
desired dry bulb and wet bulb conditions.
Step 2 Obtain the following design parameters: Entering water
temperature, water flow rate in GPM, air flow in CFM,
water flow pressure drop and design wet and dry bulb
temperatures. Air flow CFM should be between 300 and
450 CFM per ton. Unit water pressure drop should be kept
as close as possible to each other to make water balancing
easier. Go to the appropriate tables and find the proper
indicated water flow and water temperature.
Step 3 Select a unit based on total and sensible cooling
conditions. Select a unit which is closest to, but no larger
than, the actual cooling load.
Step 4 Enter tables at the design water flow and water
temperature. Read the total and sensible cooling
capacities (Note: interpolation is permissible,
extrapolation is not).
Step 5 Read the heating capacity. If it exceeds the design criteria
it is acceptable. It is quite normal for water source heat
pumps to be selected on cooling capacity only since
the heating output is usually greater than the cooling
capacity.
Step 6 Determine the correction factors associated with the
variable factors of dry bulb and wet bulb.
Corrected Total Cooling = tabulated total cooling x wet
bulb correction.
Corrected Sensible Cooling = tabulated sensible cooling
x wet/dry bulb correction.
Step 7 Compare the corrected capacities to the load
requirements. Normally if the capacities are within 10%
of the loads, the equipment is acceptable. It is better to
undersize than oversize, as undersizing improves humidity
control, reduces sound levels and extends the life of the
equipment.
Step 8 When completed, calculate water temperature rise and
assess the selection. If the units selected are not within
10% of the load calculations, then review what effect
changing the GPM, water temperature and/or air flow and
air temperature would have on the corrected capacities.
If the desired capacity cannot be achieved, select the
next larger or smaller unit and repeat the procedure.
Remember, when in doubt, undersize slightly for best
performance.
Example Equipment Selection For Cooling
Step 1 Load Determination:
Assume we have determined that the appropriate cooling load
at the desired dry bulb 80°F and wet bulb 65°F conditions is as
follows:
Total Cooling...................................................23,000 BTUH
Sensible Cooling.............................................17,000 BTUH
Entering Air Temp.......80°F Dry Bulb / 65°F Wet Bulb
Step 2 Design Conditions:
Similarly, we have also obtained the following design parameters:
Entering Water Temp....................................................90°F
Water Flow (Based upon 10°F rise in temp.) .........6.0 GPM
Air Flow...................................................................690 CFM
Step 3, 4 & 5 HP Selection:
After making our preliminary selection (TS024), we enter the
tables at design water flow and water temperature and read
Total Cooling, Sens. Cooling and Heat of Rej. capacities:
Total Cooling...................................................25,200 BTUH
Sensible Cooling.............................................18,400 BTUH
Heat of Rejection.............................................31,100 BTUH
Step 6 & 7 Entering Air and Airflow Corrections:
Next, we determine our correction factors.
Table
Ent Air
Air Flow
Corrected
Corrected Total Cooling = 25,200 x 0.9705 x 0.9724 = 23,782
Corrected Sens Cooling = 18,400 x 1.0809 x 0.8733 = 17,368
Corrected Heat of Reject = 31,100 x 0.9757 x 0.9728 = 29,519
Step 8 Water Temperature Rise Calculation & Assessment:
Actual Temperature Rise..............................................9.8°F
When we compare the Corrected Total Cooling and Corrected
Sensible Cooling figures with our load requirements stated in Step
1, we discover that our selection is within +10% of our sensible
load requirement. Furthermore, we see that our Corrected Total
Cooling figure is within 1,000 Btuh of the actual indicated load.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 6
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
TS Series Nomenclature
1 2
3
4 5 6
7
8
9
10
11
12
13
14
15
TS V 0 2 4 A G C 3 0 C L T S
Model Type
Standard
TS = Tranquility® 20
Single Stage Scroll
(Rotary: Size 006-012)
S = Standard
Supply Air & Motor Option
Configuration
Option
T
D
B
S
*V
*U
*Y
*Z
*K
*N
*P
*W
V = Vertical Upflow
H = Horizontal
D = Vertical Downflow
Unit Size
006 - E,G
009 - E,G
012 - E,G
018 - E,G
024 - E,F,G,H
030 - E,F,G,H
036 - E,F,G,H
042 - E,F,G,H,N
048 - E,F,G,H,N
060 - E,F,G,H,N
070 - F,G,H,N
Revision Level
A = Current Revision Sizes 006-012
B = Current Revision Sizes 018
C = Current Revision Sizes 024-070
AVAILABLE
VOLTAGES
Voltage
G = 208/230/60/1
E = 265/60/1
H = 208/230/60/3
F = 460/60/3
N = 575/60/3
* N/A for Sizes 006-012
Return Air
L = Left Return
R = Right Return
Heat Exchanger Options
Controls
Control
CXM
DXM
CXM w/LON
DXM w/LON
CXM w/MPC
DXM w/MPC
w/o Disconnect
C
D
L
M
N
P
Supply Configuration
Motor
Top
TSV
PSC
Down
TSD
PSC
Back
TSH
PSC
Straight
TSH
PSC
Top
TSV
PSC Hi Static
PSC Hi Static
Down
TSD
PSC Hi Static
Back
TSH
PSC Hi Static
Straight
TSH
Top
TSV
ECM
Down
TSD
ECM
Back
TSH
ECM
Straight
TSH
ECM
w/ Disconnect
A
B
E
K
R
S
Tin Plated Air Coil /
Microchannel Air Coil*
Cupro-Nickel Copper Cupro-Nickel
N
A
J
P
D
F
Non Coated Air Coil
Standard
ClimaDry® Reheat
Copper
C
E
Motorized Valve
T
S
U
W
ClimaDry® reheat coil not coated
*Microchannel On Sizes 024-048
Cabinet
OPTION RANGE
1
A
J
K
2
C
L
M
3
E
N
P
4
G
R
S
ULTRA
QUIET
NO
YES
NO
YES
1” FILTER 2” FILTER 1” FILTER 2” FILTER
RAIL
RAIL
FRAME
FRAME
YES
NO
NO
YES
NO
NO
YES
NO
NO
YES
YES
NO
NO
YES
NO
YES
NO
NO
NO
YES
YES
NO
NO
YES
NO
YES
NO
NO
NO
YES
NO
YES
NO
YES
NO
NO
YES
YES
NO
NO
Water Circuit Options
0 = None
2 = HWG (Coil Only)
5 = Secondary Circulating Pump
6 = HWG (Coil Only) w/Auto Flow Regulator 2.5 GPM/Ton
7 = HWG (Coil Only) w/Auto Flow Regulator 3.0 GPM/Ton
8 = Auto Flow Regulator 2.5 GPM/Ton
9 = Auto Flow Regulator 3.0 GPM/Ton
ClimaDry® II Option Notes:
1. Unit must have DXM control option. 460 volt unit units require a four wire power supply with neutral.
2. ClimaDry® II may not be combined with motorized water valve, internal secondary circulating pump, or automatic flow regulator
options.
3. Unit minimum entering air temperature while in the dehumidification, cooling, or continuous fan modes is 65ºF DB/55ºF WB.
Operation below this minimum may result in nuisance faults.
4. A thermostat with dehumidification mode or thermostat and separate humidistat/dehumidistat is required for activation and control
of ClimaDry® II.
5. Downflow and 575 volt units are not eligible for ClimaDry® II
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 7
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – AHRI/ASHRAE/ISO 13256-1
ASHRAE/AHRI/ISO 13256-1. English (I-P) Units
Water Loop Heat Pump
Model
Fan
Motor
Cooling 86°F
Capacity
Btuh
EER
Btuh/W
Ground Water Heat Pump
Heating 68°F
Capacity
Btuh
COP
Cooling 59°F
Capacity
Btuh
EER
Btuh/W
Ground Loop Heat Pump
Heating 50°F
Capacity
Btuh
COP
Cooling 77°F
Capacity
Btuh
EER
Btuh/W
Heating 32°F
Capacity
Btuh
COP
TSH/V006
PSC
6,300
15.7
8,000
5.4
7,400
25.5
6,300
4.4
6,700
18.5
4,800
3.4
TSH/V009
PSC
9,300
15.3
11,100
4.8
11,100
25.2
9,400
4.3
10,000
18.1
7,100
3.4
TSH/V012
PSC
11,700
15.4
13,800
4.5
13,300
24.6
11,800
4.0
12,300
18.1
9,500
3.5
TSH/V/D
018
PSC
18,600
15.0
23,000
5.2
21,300
24.8
18,600
4.5
19,500
18.4
14,500
3.6
ECM
19,200
16.5
23,300
5.9
22,100
26.3
18,900
4.9
20,200
19.4
14,500
3.9
PSC
23,800
16.9
30,800
5.9
26,500
26.4
24,100
5.0
25,300
18.9
19,200
4.0
ECM
23,900
17.9
30,400
6.1
26,900
28.5
23,800
5.2
25,500
20.9
19,100
4.2
PSC
28,000
16.3
35,500
5.5
31,000
24.9
28,400
4.7
29,200
18.5
22,200
3.9
ECM
28,000
17.3
35,100
5.8
30,800
26.7
28,000
4.9
29,200
19.4
22,000
4.1
PSC
33,400
17.0
40,400
5.6
35,400
23.2
33,200
4.7
34,300
19.2
25,900
4.1
ECM
33,500
18.1
39,900
5.9
35,400
24.9
32,600
4.9
34,600
20.4
25,600
4.3
PSC
38,500
17.2
46,300
5.6
43,700
25.4
36,200
4.7
40,100
19.4
28,700
3.8
ECM
39,400
19.6
45,100
6.0
44,400
29.5
35,200
5.2
40,700
21.9
27,400
4.1
PSC
47,100
14.8
58,000
4.7
53,600
21.3
47,500
4.0
49,600
16.8
36,600
3.4
ECM
48,900
17.2
57,700
5.2
53,700
23.9
45,700
4.4
50,600
18.8
36,100
3.7
PSC
62,400
15.9
73,900
5.0
68,500
23.1
58,200
4.2
63,900
17.2
46,900
3.7
ECM
63,200
17.2
73,200
5.4
68,900
24.9
58,200
4.6
64,400
18.4
46,400
3.9
PSC
71,000
14.6
82,100
4.6
78,000
21.1
66,100
4.0
72,900
16.2
53,800
3.4
ECM
71,100
15.7
82,000
4.8
78,100
23.0
65,200
4.1
73,000
17.2
53,000
3.6
TSH/V/D
024
TSH/V/D
030
TSH/V/D
036
TSH/V/D
042
TSH/V/D
048
TSH/V/D
060
TSH/V/D
070
Cooling capacities based upon 80.6°F DB, 66.2°F WB entering air temperature
Heating capacities based upon 68°F DB, 59°F WB entering air temperature
All ratings based upon operation at lower voltage of dual voltage rated models
ASHRAE/AHRI/ISO 13256-1. Metric (S-I) Units
Water Loop Heat Pump
Model
Fan
Motor
Cooling 30°C
Capacity
kW
EER
W/W
Ground Water Heat Pump
Heating 20°C
Capacity
kW
COP
Cooling 15°C
Capacity
kW
EER
Watts
Ground Loop Heat Pump
Heating 10°C
Capacity
kW
COP
Cooling 25°C
Capacity
kW
EER
W/W
Heating 0°C
Capacity
kW
COP
TSH/V006
PSC
1.85
4.6
2.34
5.4
2.17
7.5
1.85
4.4
1.96
5.4
1.41
3.4
TSH/V009
PSC
2.74
4.5
3.26
4.8
3.26
7.4
2.76
4.3
2.94
5.3
2.09
3.4
TSH/V012
PSC
3.43
4.5
4.05
4.5
3.90
7.2
3.46
4.0
3.60
5.3
2.78
3.5
TSH/V/D
018
PSC
5.47
4.4
6.76
5.2
6.26
7.3
5.45
4.5
5.74
5.4
4.27
3.6
ECM
5.65
4.8
6.85
5.9
6.50
7.7
5.56
4.9
5.94
5.7
4.43
3.9
PSC
6.98
4.9
9.03
5.9
7.77
7.7
7.06
5.0
7.42
5.5
5.63
4.0
ECM
7.00
5.2
8.91
6.1
7.88
8.4
6.98
5.2
7.47
6.1
5.60
4.2
PSC
8.21
4.8
10.40
5.5
9.09
7.3
8.32
4.7
8.56
5.4
6.51
3.9
ECM
8.21
5.1
10.29
5.8
9.03
7.8
8.21
4.9
8.56
5.7
6.45
4.1
PSC
9.79
5.0
11.84
5.6
10.38
6.8
9.73
4.7
10.05
5.6
7.59
4.1
TSH/V/D
024
TSH/V/D
030
TSH/V/D
036
TSH/V/D
042
TSH/V/D
048
TSH/V/D
060
TSH/V/D
070
ECM
9.82
5.3
11.69
5.9
10.38
7.3
9.55
4.9
10.14
6.0
7.50
4.3
PSC
11.28
5.0
13.57
5.6
12.81
7.4
10.61
4.7
11.75
5.7
8.41
3.8
ECM
11.55
5.7
13.22
6.0
13.01
8.6
10.32
5.2
11.93
6.4
8.03
4.1
PSC
13.80
4.3
17.00
4.7
15.71
6.2
13.92
4.0
14.54
4.9
10.73
3.4
ECM
14.33
5.1
16.91
5.2
15.74
7.0
13.39
4.4
14.83
5.5
10.58
3.7
PSC
18.29
4.7
21.66
5.0
20.08
6.8
17.06
4.2
18.73
5.0
13.75
3.7
ECM
18.52
5.0
21.45
5.4
20.19
7.3
17.06
4.6
18.87
5.4
13.60
3.9
PSC
20.81
4.3
24.06
4.6
22.86
6.2
19.37
4.0
21.37
4.8
15.77
3.4
ECM
20.84
4.6
24.03
4.8
22.89
6.7
19.10
4.1
21.40
5.0
15.53
3.6
Cooling capacities based upon 27°C DB, 19°C WB entering air temperature
Heating capacities based upon 20°C DB, 15°C WB entering air temperature
All ratings based upon operation at lower voltage of dual voltage rated models
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 8
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – Selection Notes
For operation in the shaded area when water is used in lieu of an
antifreeze solution, the LWT (Leaving Water Temperature) must
be calculated. Flow must be maintained to a level such that the
LWT is maintained above 40°F [4.4°C] when the JW3 jumper is not
clipped (see example below). Otherwise, appropriate levels of a
proper antifreeze solution should be used in systems with leaving
water temperatures of 40ºF [4.4°C] or below and the JW3 jumper
should be clipped. This is due to the potential of the refrigerant
temperature being as low as 32°F [0°C] with 40°F [4.4°C] LWT, which
may lead to a nuisance cutout due to the activation of the Low
Temperature Protection. JW3 should never be clipped for standard
range equipment or systems without antifreeze.
Example:
At 50°F EWT (Entering Water Temperature) and 1.5 gpm/ton, a 3
ton unit has a HE of 22,500 Btuh. To calculate LWT, rearrange the
formula for HE as follows:
HE = TD x GPM x 500, where HE = Heat of Extraction (Btuh); TD =
temperature difference (EWT - LWT) and GPM = U.S. Gallons per
Minute.
TD = HE / (GPM x 500)
Heating - EAT 70°F
R
EER
Airflow
CFM
HC
kW
HE
LAT
COP
A
A
3
2
4
3
6
5
0
9
0
0
N/A
N/A
26.9
27.1
28.1
28.3
28.8
29.0
25.5
25.7
26.8
27.0
27.6
27.8
22.3
22.4
24.1
24.3
25.0
25.2
19.1
19.2
20.9
21 0
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
11.5
11.8
12.8
13.1
13.2
13.6
13.5
13.8
14.7
15.1
15.3
15.7
15.6
16.0
16.8
17.2
17.5
18.0
17.9
18.3
18.9
19.4
19.7
20 3
1.31
1.20
1.34
1.23
1.35
1.23
1.35
1.24
1.38
1.26
1.39
1.27
1.39
1.27
1.41
1.29
1.42
1.30
1.43
1.30
1.44
1.32
1.45
1 33
7.3
7.8
8.5
9.0
8.9
9.4
9.1
9.7
10.2
10.9
10.8
11.4
11.0
11.7
12.1
12.9
12.8
13.5
13.1
13.9
14.1
14.9
14.8
15 7
94
88
96
90
97
91
98
91
100
93
101
94
102
95
105
97
106
98
107
98
109
100
111
101
2.57
2.89
2.80
3.14
2.87
3.23
2.92
3.27
3.14
3.52
3.23
3.63
3.29
3.69
3.49
3.92
3.61
4.05
3.67
4.12
3.84
4.32
3.98
4 47
9
8
2
4
3
7
6
TD = 22,500 / (4.5 x 500)
TD = 10°F
LWT = EWT - TD
LWT = 50 - 10 = 40°F
In this example, as long as the EWT does not fall below 50°F, the system will operate as designed. For EWTs below 50°F, higher flow
rates will be required (open loop systems, for example, require at least 2 gpm/ton when EWT is below 50°F).
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 9
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V 006A (PSC Blower)
240 CFM Nominal (Rated) Airflow Cooling, 240 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
2.0
2.0
1.0
1.0
1.5
1.5
2.0
2.0
1.0
1.0
1.5
1.5
2.0
2.0
1.0
1.0
1.5
1.5
2.0
2.0
1.0
1.0
1.5
1.5
2.0
2.0
1.0
1.0
1.5
1.5
2.0
2.0
1.0
1.0
1.5
1.5
2.0
2.0
1.0
1.0
1.5
1.5
2.0
2.0
1.0
1.0
1.5
1.5
2.0
2.0
1.0
1.0
1.5
1.5
2.0
2.0
1.0
1.0
1.5
1.5
2.0
2.0
1.0
1.0
1.5
1.5
2.0
2.0
PSI
FT
3.2
3.2
0.3
0.3
1.6
1.6
3.0
3.0
0.3
0.3
1.5
1.5
2.8
2.8
0.3
0.3
1.4
1.4
2.6
2.6
0.2
0.2
1.3
1.3
2.4
2.4
0.2
0.2
1.2
1.2
2.2
2.2
0.2
0.2
1.1
1.1
2.0
2.0
0.2
0.2
1.1
1.1
1.9
1.9
0.2
0.2
1.0
1.0
1.8
1.8
0.1
0.1
0.8
0.8
1.6
1.6
0.1
0.1
0.7
0.7
1.4
1.4
0.1
0.1
0.6
0.6
1.2
1.2
7.4
7.4
0.7
0.7
3.7
3.7
6.9
6.9
0.7
0.7
3.5
3.5
6.5
6.5
0.7
0.7
3.2
3.2
6.0
6.0
0.5
0.5
3.0
3.0
5.5
5.5
0.5
0.5
2.8
2.8
5.1
5.1
0.5
0.5
2.5
2.5
4.6
4.6
0.5
0.5
2.4
2.4
4.4
4.4
0.5
0.5
2.3
2.3
4.2
4.2
0.2
0.2
1.8
1.8
3.7
3.7
0.2
0.2
1.6
1.6
3.2
3.2
0.2
0.2
1.4
1.4
2.8
2.8
Performance capacities shown in thousands of Btuh
Cooling - EAT 80/67°F
Airflow
CFM
TC
SC
Sens/
Tot
Ratio
kW
Heating - EAT 70°F
HR
EER
Operation not recommended
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
6.7
7.0
6.9
7.2
7.0
7.3
7.0
7.3
7.0
7.3
7.1
7.4
6.9
7.2
7.0
7.3
7.1
7.4
6.7
7.0
6.9
7.2
6.9
7.2
6.4
6.6
6.6
6.8
6.7
6.9
5.9
6.2
6.1
6.4
6.3
6.5
5.7
5.9
5.9
6.2
6.0
6.3
5.4
5.6
5.7
5.9
5.8
6.0
4.9
5.1
5.2
5.4
5.3
5.5
4.4
4.6
4.6
4.8
4.8
5.0
3.9
4.1
4.1
4.3
4.2
4.4
3.9
4.7
3.9
4.7
4.0
4.8
4.2
5.0
4.2
5.0
4.2
5.0
4.4
5.2
4.4
5.2
4.4
5.2
4.4
5.3
4.5
5.3
4.5
5.3
4.4
5.2
4.4
5.3
4.4
5.3
4.2
5.0
4.3
5.1
4.3
5.2
4.1
4.9
4.2
5.0
4.2
5.1
4.0
4.8
4.1
4.9
4.2
5.0
3.7
4.5
3.9
4.6
3.9
4.7
3.5
4.1
3.6
4.3
3.7
4.4
3.2
3.8
3.3
3.9
3.4
4.0
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.7
0.8
0.6
0.7
0.6
0.7
0.7
0.8
0.7
0.8
0.7
0.8
0.7
0.8
0.7
0.8
0.7
0.8
0.7
0.8
0.7
0.8
0.7
0.8
0.7
0.8
0.7
0.8
0.7
0.8
0.8
0.9
0.8
0.9
0.7
0.9
0.8
0.9
0.8
0.9
0.8
0.9
0.8
0.9
0.8
0.9
0.8
0.9
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.5
0.4
0.4
0.4
0.4
0.5
0.5
0.4
0.5
0.4
0.4
0.5
0.5
0.5
0.5
0.4
0.5
0.5
0.6
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.7
0.7
0.6
0.6
0.6
0.6
7.6
7.9
7.8
8.1
7.9
8.2
7.9
8.2
8.0
8.3
8.0
8.3
8.0
8.3
8.0
8.4
8.1
8.4
7.9
8.2
8.0
8.3
8.0
8.3
7.7
8.0
7.8
8.1
7.9
8.2
7.4
7.7
7.5
7.8
7.6
7.9
7.2
7.5
7.4
7.7
7.5
7.8
7.1
7.3
7.2
7.5
7.3
7.6
6.7
7.0
6.9
7.2
7.0
7.3
6.4
6.7
6.6
6.8
6.6
6.9
6.1
6.4
6.3
6.5
6.3
6.6
25.6
25.8
26.9
27.1
27.7
27.9
24.8
25.0
25.9
26.1
26.7
26.9
22.2
22.4
23.9
24.0
24.7
24.9
19.4
19.6
21.1
21.3
21.9
22.1
16.5
16.6
18.0
18.2
18.9
19.0
13.7
13.8
15.1
15.2
15.8
16.0
12.5
12.6
13.8
13.9
14.5
14.6
11.3
11.4
12.4
12.5
13.1
13.2
9.2
9.3
10.2
10.2
10.7
10.8
7.5
7.6
8.2
8.3
8.6
8.7
6.1
6.1
6.7
6.7
7.0
7.0
Airflow
CFM
HC
kW
HE
LAT
COP
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
180
240
3.8
3.9
4.6
4.7
4.8
4.9
4.9
5.0
5.4
5.6
5.6
5.8
5.7
5.9
6.1
6.3
6.4
6.5
6.5
6.7
6.8
7.0
7.0
7.2
7.2
7.4
7.4
7.6
7.7
7.9
7.9
8.1
8.1
8.4
8.5
8.7
8.7
8.9
8.5
8.7
8.9
9.2
9.2
9.4
8.9
9.1
9.4
9.6
9.7
9.9
0.48
0.44
0.50
0.45
0.50
0.46
0.50
0.46
0.51
0.47
0.51
0.47
0.51
0.47
0.52
0.48
0.52
0.48
0.52
0.48
0.53
0.48
0.53
0.48
0.53
0.48
0.53
0.49
0.53
0.49
0.53
0.49
0.54
0.49
0.54
0.49
0.54
0.49
0.54
0.49
0.54
0.49
0.54
0.50
0.54
0.49
0.54
0.50
0.55
0.50
2.3
2.4
3.0
3.1
3.2
3.3
3.3
3.5
3.7
4.0
3.9
4.2
4.1
4.3
4.4
4.7
4.6
4.9
4.7
5.0
5.0
5.3
5.3
5.6
5.4
5.7
5.6
6.0
5.9
6.3
6.1
6.4
6.3
6.7
6.6
7.0
6.8
7.2
6.7
7.1
7.0
7.5
7.3
7.7
7.0
7.5
7.5
7.9
7.7
8.2
89.6
85.1
93.4
88.0
94.5
88.9
95.0
89.3
97.8
91.4
98.9
92.3
99.5
92.7
101.6
94.3
102.7
95.2
103.3
95.7
105.0
96.9
106.2
97.9
106.9
98.4
108.3
99.5
109.8
100.6
110.6
101.2
111.8
102.2
113.7
103.6
114.7
104.4
113.8
103.8
115.9
105.4
117.2
106.3
115.8
105.3
118.2
107.1
119.6
108.2
2.3
2.6
2.7
3.0
2.8
3.1
2.8
3.2
3.1
3.5
3.2
3.6
3.3
3.7
3.5
3.9
3.6
4.0
3.6
4.1
3.8
4.2
3.9
4.4
4.0
4.5
4.1
4.6
4.2
4.8
4.3
4.9
4.4
5.0
4.6
5.2
4.7
5.3
4.6
5.2
4.8
5.4
5.0
5.6
4.8
5.4
5.1
5.7
5.2
5.8
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 10
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V 009B (PSC Blower)
Performance capacities shown in thousands of Btuh
350 CFM Nominal (Rated) Airflow Cooling, 350 CFM Nominal (Rated) Airflow Heating
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
WPD
GPM
2.8
2.8
1.4
1.4
2.1
2.1
2.8
2.8
1.4
1.4
2.1
2.8
2.8
1.4
1.4
2.1
2.1
2.8
2.8
1.4
1.4
2.1
2.1
2.8
2.8
1.4
1.4
2.1
2.1
2.8
2.8
1.4
1.4
2.1
2.1
2.8
2.8
1.4
1.4
2.1
2.1
2.8
2.8
1.4
1.4
2.1
2.1
2.8
2.8
1.4
1.4
2.1
2.1
2.8
2.8
1.4
1.4
2.1
2.1
2.8
2.8
1.4
1.4
2.1
2.1
2.8
2.8
PSI
FT
2.8
2.8
0.8
0.8
1.5
1.5
2.7
2.7
0.8
0.8
1.5
2.6
2.6
0.7
0.7
1.4
1.4
2.4
2.4
0.7
0.7
1.3
1.3
2.3
2.3
0.6
0.6
1.2
1.2
2.2
2.2
0.6
0.6
1.1
1.1
2.0
2.0
0.6
0.6
1.1
1.1
1.9
1.9
0.6
0.6
1.1
1.1
1.9
1.9
0.5
0.5
1.0
1.0
1.7
1.7
0.5
0.5
0.9
0.9
1.6
1.6
0.4
0.4
0.8
0.8
1.5
1.5
6.5
6.5
1.8
1.8
3.5
3.5
6.2
6.2
1.7
1.7
3.4
5.9
5.9
1.6
1.6
3.2
3.2
5.6
5.6
1.5
1.5
3.0
3.0
5.3
5.3
1.5
1.5
2.8
2.8
5.0
5.0
1.4
1.4
2.6
2.6
4.7
4.7
1.3
1.3
2.5
2.5
4.5
4.5
1.3
1.3
2.5
2.5
4.3
4.3
1.2
1.2
2.3
2.3
4.0
4.0
1.1
1.1
2.1
2.1
3.7
3.7
1.0
1.0
1.9
1.9
3.4
3.4
Cooling - EAT 80/67°F
Airflow
CFM
TC
SC
Sens/Tot
Ratio
kW
Heating - EAT°F
HR
EER
Airflow
CFM
HC
kW
HE
LAT
COP
225
300
225
300
225
300
225
300
225
300
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
5.7
5.8
6.6
6.7
6.9
7.0
7.0
7.2
7.7
8.0
8.3
8.3
8.5
8.9
9.1
9.2
9.5
9.4
9.7
9.9
10.2
10.3
10.6
10.5
10.8
10.9
11.2
11.3
11.6
11.6
11.9
11.9
12.2
12.3
12.7
12.6
12.9
12.3
12.7
12.8
13.2
13.1
13.5
12.8
13.2
13.3
13.7
13.6
14.0
0.69
0.63
0.71
0.65
0.72
0.66
0.72
0.66
0.74
0.67
0.68
0.75
0.68
0.76
0.69
0.76
0.70
0.77
0.70
0.77
0.71
0.78
0.71
0.78
0.71
0.79
0.72
0.79
0.72
0.80
0.73
0.80
0.73
0.81
0.74
0.81
0.74
0.81
0.74
0.82
0.75
0.82
0.75
0.82
0.75
0.83
0.76
0.83
0.76
3.5
3.7
4.3
4.6
4.5
4.8
4.7
5.0
5.3
5.7
6.0
5.8
6.2
6.4
6.7
6.7
7.1
6.9
7.3
7.3
7.8
7.7
8.2
7.9
8.4
8.2
8.7
8.6
9.2
8.9
9.4
9.1
9.7
9.6
10.2
9.8
10.4
9.6
10.2
10.0
10.6
10.3
10.9
10.0
10.6
10.5
11.1
10.7
11.4
93.3
88.0
97.0
90.8
98.2
91.7
98.8
92.2
101.9
94.5
95.6
104.0
96.2
106.4
98.0
107.9
99.2
108.8
99.8
110.7
101.4
112.4
102.7
113.3
103.3
114.9
104.5
116.7
105.9
117.6
106.7
118.9
107.6
120.8
109.1
121.9
109.9
120.8
109.1
122.8
110.7
123.9
111.5
122.8
110.6
124.9
112.3
126.0
113.1
2.4
2.7
2.7
3.0
2.8
3.1
2.8
3.2
3.1
3.5
3.6
3.2
3.6
3.4
3.8
3.5
4.0
3.6
4.0
3.8
4.2
3.9
4.4
3.9
4.4
4.1
4.6
4.2
4.7
4.3
4.8
4.3
4.9
4.5
5.0
4.5
5.1
4.5
5.0
4.6
5.2
4.7
5.2
4.6
5.2
4.7
5.3
4.8
5.4
Operation not recommended
225
300
225
300
225
300
225
300
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
225
300
11.6
12.1
11.9
12.4
12.0
12.5
11.3
11.7
12.0
11.6
12.1
10.8
11.3
11.1
11.6
11.2
11.7
10.3
10.7
10.6
11.1
10.8
11.2
9.7
10.1
10.1
10.5
10.3
10.7
9.1
9.5
9.5
9.9
9.7
10.1
8.8
9.1
9.2
9.5
9.3
9.7
8.4
8.8
8.8
9.2
9.0
9.4
7.7
8.0
8.1
8.4
8.3
8.7
6.9
7.2
7.3
7.6
7.5
7.9
6.1
6.4
6.5
6.8
6.7
7.0
6.5
7.8
6.6
7.9
6.7
8.0
6.3
7.6
7.7
6.5
7.8
6.2
7.4
6.3
7.5
6.3
7.6
6.0
7.2
6.1
7.3
6.1
7.4
5.8
6.9
5.9
7.1
6.0
7.1
5.6
6.7
5.7
6.8
5.8
6.9
5.5
6.6
5.6
6.7
5.7
6.8
5.4
6.4
5.5
6.6
5.6
6.7
5.1
6.2
5.3
6.3
5.3
6.4
4.9
5.8
5.0
6.0
5.1
6.1
4.5
5.4
4.7
5.6
4.8
5.7
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.7
0.6
0.6
0.6
0.6
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.7
0.8
0.7
0.7
0.6
0.7
0.7
0.8
0.7
0.8
0.7
0.8
0.7
0.9
0.7
0.8
0.7
0.8
0.37
0.38
0.34
0.35
0.32
0.33
0.42
0.44
0.40
0.37
0.39
0.48
0.49
0.44
0.46
0.42
0.44
0.53
0.55
0.50
0.51
0.48
0.5
0.59
0.61
0.56
0.58
0.54
0.56
0.66
0.68
0.62
0.64
0.60
0.62
0.69
0.71
0.65
0.67
0.63
0.65
0.72
0.75
0.69
0.71
0.67
0.69
0.79
0.82
0.75
0.78
0.74
0.76
0.86
0.89
0.83
0.85
0.81
0.84
0.94
0.97
0.90
0.93
0.88
0.91
12.9
13.4
13.0
13.5
13.1
13.6
12.7
13.2
13.3
12.9
13.4
12.4
12.9
12.6
13.1
12.7
13.2
12.1
12.6
12.3
12.8
12.4
12.9
11.8
12.2
12.0
12.5
12.1
12.6
11.4
11.8
11.6
12.1
11.7
12.2
11.1
11.6
11.4
11.8
11.5
12.0
10.9
11.3
11.2
11.6
11.3
11.7
10.4
10.8
10.7
11.1
10.8
11.2
9.9
10.3
10.2
10.6
10.3
10.7
9.3
9.7
9.6
10.0
9.7
10.1
31.4
31.6
34.9
35.2
36.9
37.2
26.7
26.9
29.8
31.2
31.5
22.7
22.9
25.1
25.3
26.5
26.7
19.3
19.5
21.3
21.5
22.5
22.6
16.4
16.5
18.1
18.2
19.0
19.2
13.9
14.0
15.3
15.4
16.1
16.2
12.8
12.9
14.1
14.2
14.8
14.9
11.7
11.8
12.9
13
13.5
13.6
9.7
9.8
10.8
10.8
11.3
11.4
8
8.1
8.9
8.9
9.3
9.4
6.5
6.6
7.2
7.3
7.6
7.7
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 11
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V 012A (PSC Blower)
350 CFM Nominal (Rated) Airflow Cooling, 350 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
3.5
3.5
1.8
1.8
2.6
2.6
3.5
3.5
1.8
1.8
2.6
2.6
3.5
3.5
1.8
1.8
2.6
2.6
3.5
3.5
1.8
1.8
2.6
2.6
3.5
3.5
1.8
1.8
2.6
2.6
3.5
3.5
1.8
1.8
2.6
2.6
3.5
3.5
1.8
1.8
2.6
2.6
3.5
3.5
1.8
1.8
2.6
2.6
3.5
3.5
1.8
1.8
2.6
2.6
3.5
3.5
1.8
1.8
2.6
2.6
3.5
3.5
1.8
1.8
2.6
2.6
3.5
3.5
PSI
FT
4.0
4.0
0.6
0.6
2.1
2.1
3.8
3.8
0.6
0.6
2.0
2.0
3.6
3.6
0.5
0.5
1.9
1.9
3.4
3.4
0.4
0.4
1.8
1.8
3.2
3.2
0.4
0.4
1.6
1.6
3.0
3.0
0.3
0.3
1.5
1.5
2.8
2.8
0.3
0.3
1.5
1.5
2.7
2.7
0.3
0.3
1.4
1.4
2.6
2.6
0.2
0.2
1.3
1.3
2.4
2.4
0.1
0.1
1.2
1.2
2.2
2.2
0.1
0.1
1.1
1.1
2.0
2.0
9.2
9.2
1.4
1.4
4.8
4.8
8.8
8.8
1.3
1.3
4.6
4.6
8.3
8.3
1.1
1.1
4.3
4.3
7.9
7.9
1.0
1.0
4.1
4.1
7.4
7.4
0.9
0.9
3.8
3.8
6.9
6.9
0.7
0.7
3.5
3.5
6.5
6.5
0.7
0.7
3.4
3.4
6.3
6.3
0.6
0.6
3.3
3.3
6.0
6.0
0.5
0.5
3.0
3.0
5.6
5.6
0.3
0.3
2.7
2.7
5.1
5.1
0.2
0.2
2.5
2.5
4.6
4.6
Airflow
CFM
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
HR
EER
Operation not recommended
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
12.1
12.6
12.3
12.8
12.7
13.3
12.7
13.2
12.8
13.3
12.9
13.5
12.7
13.2
12.9
13.4
12.9
13.5
12.5
13.0
12.7
13.3
12.8
13.4
12.0
12.5
12.3
12.8
12.5
13.0
11.3
11.7
11.7
12.2
11.9
12.4
10.9
11.3
11.3
11.8
11.5
12.0
10.4
10.9
10.9
11.4
11.1
11.6
9.5
9.9
10.0
10.4
10.2
10.7
8.5
8.9
9.0
9.4
9.3
9.6
7.5
7.8
8.0
8.3
8.2
8.6
6.5
7.8
6.6
7.9
6.8
8.1
6.9
8.2
6.9
8.3
6.9
8.3
6.9
8.3
7.0
8.3
7.0
8.4
6.9
8.2
6.9
8.3
7.0
8.4
6.7
8.0
6.8
8.1
6.9
8.2
6.5
7.8
6.6
7.9
6.7
8.0
6.4
7.6
6.5
7.8
6.5
7.8
6.2
7.5
6.4
7.6
6.4
7.7
6.0
7.2
6.1
7.3
6.2
7.4
5.7
6.9
5.9
7.0
5.9
7.1
5.5
6.6
5.6
6.7
5.7
6.8
0.5
0.6
0.5
0.6
0.5
0.6
0.5
0.6
0.5
0.6
0.5
0.6
0.5
0.6
0.5
0.6
0.5
0.6
0.5
0.6
0.5
0.6
0.5
0.6
0.6
0.6
0.6
0.6
0.5
0.6
0.6
0.7
0.6
0.6
0.6
0.6
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.6
0.7
0.7
0.8
0.7
0.7
0.6
0.7
0.7
0.8
0.7
0.8
0.7
0.8
0.50
0.51
0.48
0.49
0.47
0.48
0.55
0.56
0.52
0.53
0.50
0.52
0.61
0.63
0.57
0.59
0.55
0.57
0.67
0.69
0.63
0.65
0.61
0.63
0.75
0.77
0.70
0.73
0.68
0.70
0.83
0.85
0.78
0.81
0.76
0.78
0.87
0.90
0.82
0.85
0.80
0.83
0.91
0.94
0.87
0.89
0.84
0.87
1.00
1.04
0.96
0.99
0.93
0.96
1.10
1.14
1.05
1.09
1.03
1.06
1.20
1.24
1.15
1.19
1.13
1.16
13.8
14.4
13.9
14.5
14.3
14.9
14.6
15.2
14.6
15.2
14.6
15.2
14.8
15.4
14.8
15.4
14.8
15.4
14.8
15.4
14.9
15.5
14.9
15.5
14.5
15.1
14.7
15.3
14.8
15.4
14.1
14.7
14.3
14.9
14.5
15.0
13.8
14.4
14.1
14.7
14.2
14.8
13.5
14.1
13.9
14.4
14.0
14.6
12.9
13.4
13.3
13.8
13.4
14.0
12.3
12.8
12.6
13.1
12.8
13.3
11.6
12.0
11.9
12.4
12.1
12.5
24.4
24.6
25.9
26.1
27.3
27.5
23.3
23.5
24.8
25.0
25.6
25.8
21.0
21.2
22.6
22.7
23.4
23.5
18.6
18.8
20.2
20.3
20.9
21.1
16.1
16.2
17.5
17.7
18.3
18.4
13.6
13.7
15.0
15.1
15.7
15.8
12.5
12.6
13.8
13.9
14.5
14.6
11.4
11.5
12.6
12.7
13.2
13.3
9.5
9.5
10.5
10.5
11.0
11.1
7.7
7.8
8.6
8.6
9.0
9.1
6.2
6.3
6.9
7.0
7.3
7.3
Airflow
CFM
HC
kW
HE
LAT
COP
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
265
350
7.7
8.0
8.9
9.1
9.3
9.5
9.5
9.7
10.3
10.6
10.7
11.0
10.9
11.2
11.5
11.8
11.9
12.2
12.0
12.4
12.5
12.8
12.8
13.1
12.9
13.3
13.2
13.5
13.4
13.8
13.5
13.9
13.7
14.0
13.8
14.2
13.8
14.2
13.8
14.1
13.8
14.2
13.9
14.2
13.9
14.3
13.9
14.3
13.9
14.3
0.89
0.82
0.92
0.85
0.94
0.86
0.94
0.86
0.97
0.88
0.98
0.89
0.98
0.90
1.00
0.92
1.01
0.93
1.02
0.93
1.03
0.94
1.04
0.95
1.05
0.96
1.06
0.97
1.06
0.97
1.07
0.98
1.07
0.98
1.08
0.98
1.08
0.98
1.08
0.98
1.08
0.98
1.08
0.98
1.08
0.99
1.08
0.98
1.07
0.98
4.9
5.2
5.9
6.3
6.2
6.6
6.4
6.8
7.2
7.6
7.5
8.0
7.7
8.1
8.2
8.7
8.5
9.0
8.7
9.2
9.0
9.6
9.3
9.9
9.4
10.0
9.7
10.3
9.9
10.5
9.9
10.6
10.1
10.7
10.2
10.8
10.2
10.9
10.2
10.8
10.2
10.9
10.3
10.9
10.3
10.9
10.3
10.9
10.3
10.9
97.1
91.0
101.0
94.1
102.4
95.1
103.1
95.7
106.0
98.0
107.4
99.1
108.1
99.6
110.2
101.2
111.5
102.2
112.1
102.7
113.6
103.9
114.6
104.7
115.1
105.1
116.1
105.8
116.9
106.4
117.2
106.7
117.8
107.1
118.2
107.4
118.3
107.6
118.1
107.4
118.4
107.6
118.5
107.7
118.5
107.7
118.6
107.7
118.6
107.8
2.5
2.8
2.8
3.2
2.9
3.3
2.9
3.3
3.1
3.5
3.2
3.6
3.2
3.6
3.4
3.8
3.4
3.9
3.5
3.9
3.5
4.0
3.6
4.0
3.6
4.1
3.7
4.1
3.7
4.1
3.7
4.2
3.7
4.2
3.8
4.2
3.8
4.2
3.8
4.2
3.8
4.2
3.8
4.2
3.8
4.2
3.8
4.3
3.8
4.3
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 12
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 018B (PSC Blower)
Performance capacities shown in thousands of Btuh
600 CFM Nominal (Rated) Airflow Cooling, 600 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
PSI
FT
3.9
3.9
0.7
0.7
2.1
2.1
3.5
3.5
0.6
0.6
2.0
2.0
3.2
3.2
0.5
0.5
1.7
1.7
2.8
2.8
0.3
0.3
1.5
1.5
2.6
2.6
0.3
0.3
1.4
1.4
2.4
2.4
0.2
0.2
1.2
1.2
2.2
2.2
0.2
0.2
1.2
1.2
2.1
2.1
0.2
0.2
1.1
1.1
2.0
2.0
0.2
0.2
1.1
1.1
1.9
1.9
0.1
0.1
0.9
0.9
1.7
1.7
0.1
0.1
0.8
0.8
1.6
1.6
9.0
9.0
1.6
1.6
4.9
4.9
8.1
8.1
1.4
1.4
4.6
4.6
7.4
7.4
1.2
1.2
3.9
3.9
6.5
6.5
0.7
0.7
3.5
3.5
6.0
6.0
0.7
0.7
3.2
3.2
5.5
5.5
0.5
0.5
2.8
2.8
5.1
5.1
0.5
0.5
2.7
2.7
4.9
4.9
0.5
0.5
2.5
2.5
4.6
4.6
0.5
0.5
2.5
2.5
4.4
4.4
0.2
0.2
2.1
2.1
3.9
3.9
0.2
0.2
1.8
1.8
3.7
3.7
Airflow
CFM
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Heating - EAT 70°F
EER
HWC
Operation not recommended
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
20.7
21.5
21.0
21.8
21.2
22.0
20.8
21.7
21.0
21.8
21.2
22.1
20.6
21.5
21.0
21.8
21.1
21.9
19.9
20.7
20.4
21.2
20.6
21.4
18.9
19.7
19.5
20.3
19.8
20.6
17.7
18.5
18.4
19.2
18.7
19.5
17.1
17.8
17.8
18.5
18.1
18.9
16.5
17.2
17.2
17.9
17.5
18.3
15.2
15.9
15.9
16.6
16.3
16.9
14.0
14.6
14.6
15.2
15.0
15.6
12.9
13.4
13.4
14.0
13.7
14.3
16.8
14.0
16.8
14.1
16.8
14.1
17.2
14.4
17.2
14.4
17.3
14.5
17.3
14.5
17.5
14.6
17.5
14.6
16.8
14.1
17.2
14.3
17.3
14.4
16.2
13.5
16.6
13.8
16.8
14.0
15.4
12.9
15.9
13.2
16.1
13.4
15.0
12.6
15.5
12.9
15.7
13.1
14.7
12.3
15.1
12.6
15.3
12.8
14.0
11.7
14.3
12.0
14.5
12.1
13.4
11.2
13.7
11.4
13.8
11.6
13.1
10.9
13.2
11.0
13.3
11.1
0.81
0.65
0.80
0.64
0.80
0.64
0.83
0.66
0.82
0.66
0.82
0.66
0.84
0.67
0.83
0.67
0.83
0.67
0.85
0.68
0.84
0.68
0.84
0.67
0.86
0.69
0.85
0.68
0.85
0.68
0.87
0.70
0.86
0.69
0.86
0.69
0.88
0.70
0.87
0.70
0.86
0.69
0.89
0.71
0.88
0.70
0.87
0.70
0.92
0.74
0.90
0.72
0.89
0.72
0.96
0.77
0.94
0.75
0.93
0.74
1.02
0.82
0.99
0.79
0.97
0.78
0.78
0.80
0.74
0.76
0.72
0.75
0.85
0.88
0.81
0.83
0.79
0.81
0.95
0.98
0.89
0.92
0.86
0.89
1.05
1.09
0.99
1.02
0.96
0.99
1.17
1.21
1.10
1.14
1.07
1.10
1.31
1.35
1.23
1.27
1.19
1.23
1.39
1.43
1.30
1.35
1.26
1.30
1.46
1.51
1.38
1.42
1.33
1.38
1.64
1.69
1.54
1.59
1.50
1.55
1.84
1.90
1.73
1.79
1.68
1.74
2.06
2.13
1.94
2.01
1.89
1.95
23.3
24.3
23.5
24.4
23.6
24.6
23.7
24.6
23.7
24.7
23.9
24.8
23.9
24.8
24.0
25.0
24.0
25.0
23.5
24.4
23.7
24.7
23.8
24.8
22.9
23.8
23.2
24.2
23.4
24.3
22.2
23.1
22.6
23.5
22.8
23.7
21.9
22.7
22.2
23.1
22.4
23.3
21.5
22.4
21.9
22.8
22.1
23.0
20.8
21.7
21.2
22.0
21.4
22.2
20.3
21.1
20.5
21.4
20.7
21.5
19.9
20.7
20.1
20.8
20.2
21.0
26.6
26.8
28.4
28.6
29.3
29.6
24.5
24.7
26.0
26.2
26.9
27.1
21.8
22.0
23.5
23.7
24.4
24.6
18.9
19.1
20.6
20.8
21.5
21.7
16.1
16.2
17.7
17.9
18.6
18.7
13.6
13.7
15.0
15.1
15.7
15.9
12.4
12.5
13.7
13.8
14.4
14.6
11.3
11.4
12.5
12.6
13.1
13.2
9.3
9.4
10.3
10.4
10.9
10.9
7.6
7.7
8.4
8.5
8.9
9.0
6.2
6.3
6.9
7.0
7.3
7.3
0.6
0.6
0.5
0.6
0.5
0.5
0.9
1.0
0.9
0.9
0.8
0.8
1.5
1.5
1.3
1.4
1.2
1.3
2.0
2.1
1.8
1.9
1.6
1.7
2.7
2.8
2.4
2.5
2.1
2.2
3.2
3.3
3.0
3.1
2.7
2.9
3.6
3.7
3.3
3.5
3.1
3.2
4.1
4.3
3.8
3.9
3.5
3.6
4.5
4.6
4.3
4.4
4.2
4.3
5.3
5.4
5.2
5.3
5.0
5.1
6.3
6.4
6.1
6.2
5.9
6.0
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
450
600
12.2
12.5
13.7
14.0
14.2
14.6
14.5
14.9
15.8
16.3
16.5
16.9
16.8
17.3
18.0
18.5
18.7
19.2
19.2
19.7
20.1
20.7
21.0
21.6
21.5
22.1
22.3
22.9
23.4
24.0
23.9
24.6
24.6
25.2
25.8
26.5
26.5
27.2
25.8
26.4
27.1
27.8
27.8
28.6
26.9
27.7
28.4
29.1
29.1
29.9
1.36
1.24
1.40
1.28
1.41
1.29
1.42
1.30
1.44
1.32
1.45
1.33
1.46
1.33
1.47
1.35
1.48
1.35
1.49
1.36
1.50
1.37
1.51
1.38
1.52
1.39
1.54
1.40
1.56
1.43
1.57
1.44
1.59
1.46
1.63
1.49
1.66
1.52
1.63
1.49
1.69
1.54
1.72
1.58
1.68
1.53
1.74
1.60
1.79
1.63
7.8
8.3
9.2
9.7
9.6
10.2
9.9
10.5
11.1
11.8
11.7
12.4
12.0
12.8
13.1
13.9
13.8
14.6
14.2
15.1
15.1
16.0
15.9
16.9
16.4
17.4
17.1
18.1
18.0
19.1
18.5
19.7
19.1
20.3
20.2
21.4
20.7
22.0
20.1
21.3
21.2
22.5
21.8
23.2
21.1
22.4
22.3
23.6
22.9
24.3
95.0
89.3
98.1
91.7
99.3
92.5
99.9
93.0
102.6
95.1
103.9
96.1
104.7
96.7
107.0
98.5
108.6
99.7
109.4
100.4
111.4
101.9
113.3
103.3
114.3
104.1
115.9
105.4
118.1
107.0
119.3
107.9
120.6
108.9
123.1
110.9
124.5
111.9
123.0
110.8
125.7
112.9
127.2
114.1
125.4
112.7
128.3
114.9
130.0
116.2
2.6
2.9
2.9
3.2
2.9
3.3
3.0
3.4
3.2
3.6
3.3
3.7
3.4
3.8
3.6
4.0
3.7
4.2
3.8
4.2
3.9
4.4
4.1
4.6
4.1
4.7
4.3
4.8
4.4
4.9
4.5
5.0
4.5
5.1
4.6
5.2
4.7
5.3
4.6
5.2
4.7
5.3
4.7
5.3
4.7
5.3
4.8
5.3
4.8
5.4
1.4
1.5
1.7
1.7
1.8
1.8
1.8
1.9
1.9
2.0
2.0
2.1
2.1
2.1
2.2
2.3
2.3
2.4
2.4
2.4
2.5
2.6
2.6
2.6
2.7
2.7
2.8
2.8
2.9
2.9
3.0
3.1
3.0
3.1
3.1
3.2
3.2
3.3
3.1
3.2
3.3
3.3
3.4
3.5
3.3
3.4
3.4
3.5
3.5
3.6
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 13
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 018B (ECM Blower)
750 CFM Nominal (Rated) Airflow Cooling, 750 CFM Nominal (Rated) Airflow Heating
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
WPD
GPM
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
2.8
2.8
4.1
4.1
5.5
5.5
PSI
FT
3.9
3.9
0.7
0.7
2.1
2.1
3.5
3.5
0.6
0.6
2
2
3.2
3.2
0.5
0.5
1.7
1.7
2.8
2.8
0.3
0.3
1.5
1.5
2.6
2.6
0.3
0.3
1.4
1.4
2.4
2.4
0.2
0.2
1.2
1.2
2.2
2.2
0.2
0.2
1.15
1.15
2.1
2.1
0.2
0.2
1.1
1.1
2
2
0.2
0.2
1.1
1.1
1.9
1.9
0.1
0.1
0.9
0.9
1.7
1.7
0.1
0.1
0.8
0.8
1.6
1.6
9.0
9.0
1.6
1.6
4.9
4.9
8.1
8.1
1.4
1.4
4.6
4.6
7.4
7.4
1.2
1.2
3.9
3.9
6.5
6.5
0.7
0.7
3.5
3.5
6.0
6.0
0.7
0.7
3.2
3.2
5.5
5.5
0.5
0.5
2.8
2.8
5.1
5.1
0.5
0.5
2.7
2.7
4.9
4.9
0.5
0.5
2.5
2.5
4.6
4.6
0.5
0.5
2.5
2.5
4.4
4.4
0.2
0.2
2.1
2.1
3.9
3.9
0.2
0.2
1.8
1.8
3.7
3.7
Performance capacities shown in thousands of Btuh
Cooling - EAT 80/67°F
Airflow
CFM
TC
SC
Sens/
Tot
Ratio
kW
HR
Heating - EAT 70°F
EER
HWC
Operation not recommended
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
20.3
21.1
20.7
21.5
21.3
22.1
20.8
21.6
21.3
22.1
21.5
22.4
21.3
22.1
21.5
22.3
21.6
22.5
20.6
21.5
21.1
22.0
21.3
22.2
19.6
20.4
20.3
21.1
20.6
21.4
18.4
19.2
19.1
19.9
19.5
20.3
17.8
18.5
18.5
19.2
18.9
19.6
17.2
17.8
17.9
18.6
18.2
19.0
15.9
16.5
16.6
17.2
16.9
17.6
14.7
15.3
15.3
15.9
15.6
16.3
13.8
14.4
14.3
14.8
14.5
15.1
12.4
14.5
12.6
14.7
12.9
15.0
12.9
15.0
13.1
15.2
13.2
15.3
13.5
15.7
13.5
15.7
13.5
15.7
13.6
15.8
13.6
15.9
13.6
15.9
13.4
15.6
13.5
15.7
13.6
15.8
13.1
15.2
13.3
15.4
13.4
15.5
12.9
15.0
13.1
15.2
13.2
15.3
12.7
14.8
12.9
15.0
13.0
15.2
12.3
14.3
12.5
14.6
12.6
14.7
12.0
13.9
12.1
14.1
12.2
14.2
11.5
13.4
11.8
13.7
11.9
13.9
0.61
0.68
0.61
0.68
0.61
0.68
0.62
0.70
0.61
0.69
0.61
0.69
0.63
0.71
0.63
0.70
0.62
0.70
0.66
0.74
0.65
0.72
0.64
0.72
0.68
0.76
0.67
0.75
0.66
0.74
0.71
0.79
0.69
0.78
0.69
0.77
0.72
0.81
0.71
0.79
0.70
0.78
0.74
0.83
0.72
0.81
0.71
0.80
0.77
0.87
0.76
0.85
0.75
0.84
0.81
0.91
0.79
0.89
0.78
0.88
0.83
0.93
0.83
0.92
0.82
0.92
0.75
0.79
0.71
0.75
0.70
0.74
0.81
0.86
0.77
0.81
0.75
0.79
0.90
0.95
0.84
0.89
0.82
0.87
0.99
1.05
0.93
0.99
0.90
0.96
1.11
1.17
1.04
1.10
1.00
1.06
1.24
1.31
1.16
1.23
1.12
1.19
1.32
1.40
1.24
1.31
1.20
1.26
1.40
1.48
1.31
1.38
1.27
1.34
1.58
1.67
1.48
1.56
1.43
1.51
1.79
1.89
1.67
1.77
1.62
1.71
2.03
2.14
1.90
2.01
1.83
1.94
22.8
23.8
23.1
24.1
23.6
24.6
23.5
24.5
23.9
24.9
24.0
25.1
24.3
25.3
24.3
25.4
24.4
25.4
24.0
25.0
24.3
25.3
24.4
25.4
23.4
24.4
23.8
24.8
24.0
25.0
22.7
23.6
23.1
24.1
23.3
24.3
22.3
23.3
22.7
23.7
22.9
23.9
21.9
22.9
22.3
23.3
22.6
23.5
21.3
22.2
21.6
22.6
21.8
22.8
20.9
21.8
21.1
22.0
21.2
22.1
20.8
21.7
20.8
21.7
20.8
21.7
27.3
26.8
29.1
28.6
30.5
30.0
25.5
25.1
27.6
27.2
28.6
28.1
23.7
23.3
25.5
25.1
26.4
26.0
20.8
20.4
22.7
22.3
23.6
23.2
17.7
17.4
19.5
19.2
20.5
20.1
14.8
14.6
16.5
16.2
17.3
17.0
13.5
13.3
15.1
14.8
15.9
15.6
12.3
12.1
13.7
13.4
14.4
14.2
10.1
9.9
11.2
11.0
11.8
11.6
8.3
8.1
9.2
9.0
9.7
9.5
6.8
6.7
7.5
7.4
7.9
7.8
0.6
0.6
0.5
0.6
0.5
0.5
0.9
1.0
0.9
0.9
0.8
0.8
1.5
1.5
1.3
1.4
1.2
1.3
2.0
2.1
1.8
1.9
1.6
1.7
2.7
2.8
2.4
2.5
2.1
2.2
3.2
3.3
3.0
3.1
2.7
2.9
3.6
3.7
3.3
3.5
3.1
3.2
4.1
4.3
3.8
3.9
3.5
3.6
4.5
4.6
4.3
4.4
4.2
4.3
5.3
5.4
5.2
5.3
5.0
5.1
6.3
6.4
6.1
6.2
5.9
6.0
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
550
750
11.9
12.3
13.2
13.6
13.7
14.1
14.0
14.4
15.3
15.8
16.0
16.5
16.3
16.8
17.5
18.1
18.4
18.9
18.8
19.4
19.8
20.4
20.8
21.4
21.3
22.0
22.1
22.8
23.2
23.9
23.8
24.5
24.3
25.1
25.5
26.3
26.0
26.8
25.4
26.2
26.5
27.3
27.0
27.9
26.4
27.2
27.5
28.4
28.0
28.9
1.25
1.16
1.29
1.20
1.31
1.21
1.31
1.21
1.33
1.23
1.34
1.24
1.34
1.24
1.35
1.25
1.36
1.26
1.36
1.26
1.37
1.27
1.38
1.28
1.39
1.28
1.40
1.29
1.42
1.31
1.43
1.32
1.45
1.34
1.49
1.38
1.52
1.40
1.49
1.38
1.55
1.43
1.59
1.47
1.54
1.42
1.61
1.49
1.66
1.53
7.9
8.4
9.0
9.6
9.5
10.1
9.7
10.3
10.9
11.6
11.5
12.3
11.9
12.6
13.0
13.8
13.8
14.6
14.2
15.1
15.2
16.1
16.1
17.1
16.6
17.6
17.3
18.4
18.3
19.4
18.8
20.0
19.3
20.5
20.3
21.5
20.7
22.0
20.2
21.4
21.1
22.4
21.5
22.8
21.0
22.4
21.9
23.2
22.3
23.6
90.0
85.1
92.3
86.8
93.1
87.5
93.6
87.8
95.8
89.5
96.9
90.3
97.5
90.8
99.5
92.3
100.9
93.4
101.7
93.9
103.4
95.2
105.0
96.5
105.9
97.1
107.2
98.2
109.0
99.5
110.0
100.2
111.0
101.0
112.9
102.4
113.8
103.1
112.7
102.3
114.6
103.7
115.5
104.4
114.5
103.6
116.3
105.0
117.2
105.7
2.8
3.1
3.0
3.3
3.1
3.4
3.1
3.5
3.4
3.8
3.5
3.9
3.6
4.0
3.8
4.2
4.0
4.4
4.0
4.5
4.2
4.7
4.4
4.9
4.5
5.0
4.6
5.2
4.8
5.3
4.9
5.4
4.9
5.5
5.0
5.6
5.0
5.6
5.0
5.6
5.0
5.6
5.0
5.6
5.0
5.6
5.0
5.6
5.0
5.5
1.4
1.5
1.7
1.7
1.8
1.8
1.8
1.9
1.9
2.0
2.0
2.1
2.1
2.1
2.2
2.3
2.3
2.4
2.4
2.4
2.5
2.6
2.6
2.6
2.7
2.7
2.8
2.8
2.9
2.9
3.0
3.1
3.0
3.1
3.1
3.2
3.2
3.3
3.1
3.2
3.3
3.3
3.4
3.5
3.3
3.4
3.4
3.5
3.5
3.6
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 14
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 024 (PSC Blower)
950 CFM Nominal (Rated) Airflow Cooling, 950 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
PSI
FT
1.9
1.9
0.9
0.9
1.2
1.2
1.7
1.7
0.7
0.7
1.0
1.0
1.6
1.6
0.5
0.5
0.9
0.9
1.5
1.5
0.4
0.4
0.8
0.8
1.4
1.4
0.3
0.3
0.7
0.7
1.3
1.3
0.2
0.2
0.7
0.7
1.2
1.2
0.2
0.2
0.6
0.6
1.1
1.1
0.1
0.1
0.6
0.6
1.1
1.1
0.1
0.1
0.5
0.5
1.0
1.0
0.0
0.0
0.5
0.5
0.8
0.8
0.0
0.0
0.3
0.3
0.6
0.6
4.4
4.4
2.1
2.1
2.7
2.7
4.0
4.0
1.5
1.5
2.4
2.4
3.6
3.6
1.2
1.2
2.1
2.1
3.3
3.3
0.9
0.9
1.8
1.8
3.1
3.1
0.6
0.6
1.7
1.7
2.9
2.9
0.5
0.5
1.5
1.5
2.7
2.7
0.4
0.4
1.5
1.5
2.6
2.6
0.3
0.3
1.4
1.4
2.5
2.5
0.2
0.2
1.2
1.2
2.2
2.2
0.1
0.1
1.0
1.0
1.9
1.9
0.0
0.0
0.8
0.8
1.5
1.5
Airflow
CFM
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
28.1
30.4
27.5
29.7
26.9
29.1
28.1
30.4
28.2
30.5
28.1
30.4
27.4
29.6
28.0
30.3
28.2
30.5
26.2
28.3
27.1
29.3
27.5
29.8
24.6
26.6
25.7
27.8
26.3
28.4
22.8
24.7
24.0
26.0
24.7
26.7
21.9
23.7
23.1
25.0
23.7
25.7
21.0
22.7
22.2
24.0
22.8
24.7
19.1
20.7
20.3
21.9
20.9
22.6
17.5
18.9
18.5
20.0
19.0
20.5
16.2
17.5
16.9
18.3
17.3
18.7
16.5
19.4
15.6
18.3
14.9
17.6
17.1
20.2
16.7
19.7
16.4
19.3
17.2
20.2
17.2
20.2
17.1
20.1
16.8
19.7
17.1
20.1
17.2
20.2
16.1
19.0
16.6
19.5
16.8
19.8
15.3
18.1
15.9
18.7
16.2
19.0
14.9
17.6
15.5
18.2
15.8
18.5
14.5
17.1
15.1
17.7
15.4
18.1
13.8
16.2
14.2
16.7
14.5
17.1
13.2
15.5
13.5
15.9
13.7
16.1
12.9
15.1
13.0
15.3
13.1
15.4
0.59
0.64
0.57
0.62
0.56
0.60
0.61
0.66
0.59
0.65
0.58
0.64
0.63
0.68
0.61
0.67
0.61
0.66
0.64
0.70
0.63
0.69
0.62
0.68
0.66
0.71
0.65
0.70
0.64
0.70
0.67
0.73
0.66
0.72
0.66
0.71
0.68
0.74
0.67
0.73
0.66
0.72
0.69
0.75
0.68
0.74
0.67
0.73
0.72
0.78
0.70
0.76
0.69
0.76
0.75
0.82
0.73
0.80
0.72
0.78
0.79
0.86
0.77
0.84
0.76
0.82
0.89
0.94
0.83
0.87
0.80
0.84
1.00
1.05
0.92
0.97
0.88
0.93
1.10
1.16
1.02
1.07
0.98
1.03
1.23
1.29
1.13
1.19
1.09
1.15
1.36
1.43
1.26
1.33
1.22
1.28
1.51
1.59
1.41
1.48
1.36
1.43
1.6
1.68
1.49
1.57
1.44
1.51
1.68
1.77
1.57
1.65
1.51
1.59
1.88
1.98
1.76
1.85
1.69
1.78
2.10
2.21
1.97
2.07
1.90
2.00
2.36
2.48
2.21
2.32
2.13
2.24
32.0
33.6
31.0
32.7
30.3
31.9
32.3
34.0
32.1
33.8
31.9
33.5
31.9
33.6
32.3
34.0
32.3
34.0
31.0
32.7
31.7
33.4
32.0
33.7
29.9
31.5
30.7
32.4
31.1
32.8
28.6
30.1
29.5
31.0
30.0
31.5
27.9
29.4
28.8
30.3
29.3
30.8
27.3
28.7
28.1
29.6
28.6
30.1
26.1
27.4
26.8
28.2
27.2
28.6
25.1
26.5
25.7
27.0
26.0
27.3
24.7
26.0
24.9
26.2
25.1
26.4
31.5
32.4
33.2
34.1
33.7
34.6
28.2
29.0
30.6
31.5
31.7
32.6
24.8
25.5
27.5
28.3
28.8
29.6
21.3
21.9
24.0
24.6
25.2
25.9
18.1
18.6
20.4
20.9
21.6
22.2
15.1
15.5
17.1
17.6
18.1
18.6
13.8
14.2
15.6
16.0
16.6
17.1
12.4
12.8
14.1
14.5
15.1
15.5
10.2
10.5
11.5
11.8
12.3
12.7
8.3
8.6
9.4
9.6
10.0
10.3
6.9
7.1
7.7
7.9
8.1
8.4
0.8
0.8
0.7
0.7
0.6
0.6
1.0
1.1
0.9
0.9
0.8
0.8
1.4
1.5
1.1
1.2
1.0
1.1
1.8
1.9
1.5
1.6
1.3
1.4
2.3
2.4
1.9
2.0
1.8
1.9
2.9
3.0
2.5
2.6
2.3
2.4
3.2
3.4
2.8
2.9
2.6
2.7
3.5
3.7
3.0
3.2
2.9
3.0
4.2
4.4
3.7
3.9
3.5
3.7
5.0
5.3
4.6
4.8
4.3
4.5
6.0
6.3
5.4
5.7
5.1
5.4
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
15.7
16.4
17.4
18.2
18.3
19.1
18.8
19.6
20.2
21.1
21.2
22.2
21.8
22.8
22.9
24.0
24.2
25.3
24.9
26.0
25.7
26.9
27.2
28.4
28.0
29.2
28.6
29.8
30.2
31.6
31.2
32.6
31.4
32.9
33.4
34.9
34.5
36.0
32.9
34.4
35.0
36.6
36.2
37.8
34.4
36.0
36.6
38.3
37.9
39.6
1.69
1.50
1.69
1.50
1.70
1.51
1.70
1.51
1.71
1.52
1.71
1.52
1.71
1.52
1.72
1.53
1.73
1.54
1.73
1.54
1.74
1.55
1.75
1.56
1.75
1.56
1.76
1.57
1.79
1.59
1.80
1.60
1.80
1.60
1.83
1.63
1.85
1.65
1.83
1.6
1.9
1.7
1.9
1.7
1.85
1.65
1.90
1.69
1.92
1.71
10.7
11.3
12.3
13.1
13.2
14.0
13.6
14.5
15.0
15.9
16.0
17.0
16.6
17.6
17.7
18.8
18.9
20.0
19.5
20.7
20.4
21.6
21.7
23.1
22.5
23.9
23.1
24.5
24.7
26.2
25.5
27.1
25.8
27.4
27.6
29.3
28.6
30.4
27.2
28.9
29.1
30.9
30.2
32.1
28.6
30.4
30.6
32.5
31.8
33.8
91.4
86.0
93.7
87.8
94.9
88.6
95.6
89.1
97.5
90.6
98.9
91.6
99.7
92.2
101.2
93.4
102.9
94.6
103.9
95.3
105.0
96.2
107.0
97.7
108.1
98.5
108.9
99.1
111.2
100.8
112.4
101.7
112.8
102.0
115.5
104.0
116.9
105.1
114.9
103.5
117.7
105.7
119.3
106.9
116.9
105.1
119.9
107.3
121.6
108.6
2.7
3.2
3.0
3.6
3.2
3.7
3.2
3.8
3.5
4.1
3.6
4.3
3.7
4.4
3.9
4.6
4.1
4.8
4.2
4.9
4.3
5.1
4.5
5.3
4.7
5.5
4.7
5.6
5.0
5.8
5.1
6.0
5.1
6.0
5.3
6.3
5.4
6.4
5.3
6.2
5.5
6.5
5.6
6.6
5.4
6.4
5.7
6.6
5.8
6.8
1.7
1.5
2.0
1.8
2.1
1.9
2.1
1.9
2.4
2.1
2.6
2.3
2.6
2.3
2.8
2.5
2.9
2.6
3.0
2.7
3.1
2.8
3.4
3.0
3.5
3.1
3.6
3.2
3.8
3.4
3.9
3.5
3.9
3.5
4.2
3.7
4.3
3.8
4.1
3.7
4.3
3.9
4.4
4.0
4.3
3.8
4.5
4.0
4.6
4.1
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 15
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 024 (ECM Blower)
950 CFM Nominal (Rated) Airflow Cooling, 950 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
3.0
3.0
4.5
4.5
6.0
6.0
PSI
FT
Airflow
CFM
1.9
1.9
0.9
0.9
1.2
1.2
1.7
1.7
0.7
0.7
1.0
1.0
1.6
1.6
0.5
0.5
0.9
0.9
1.5
1.5
0.4
0.4
0.8
0.8
1.4
1.4
0.3
0.3
0.7
0.7
1.3
1.3
0.2
0.2
0.7
0.7
1.2
1.2
0.2
0.2
0.6
0.6
1.1
1.1
0.1
0.1
0.6
0.6
1.1
1.1
0.1
0.1
0.5
0.5
1.0
1.0
0.0
0.0
0.5
0.5
0.8
0.8
0.0
0.0
0.3
0.3
0.6
0.6
4.4
4.4
2.1
2.1
2.7
2.7
4.0
4.0
1.5
1.5
2.4
2.4
3.6
3.6
1.2
1.2
2.1
2.1
3.3
3.3
0.9
0.9
1.8
1.8
3.1
3.1
0.6
0.6
1.7
1.7
2.9
2.9
0.5
0.5
1.5
1.5
2.7
2.7
0.4
0.4
1.5
1.5
2.6
2.6
0.3
0.3
1.4
1.4
2.5
2.5
0.2
0.2
1.2
1.2
2.2
2.2
0.1
0.1
1.0
1.0
1.9
1.9
0.0
0.0
0.8
0.8
1.5
1.5
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
32.5
33.4
34.4
35.3
34.9
35.9
29.3
30.1
31.9
32.8
32.8
33.7
25.5
26.2
28.3
29.1
29.6
30.5
21.8
22.5
24.6
25.3
26.1
26.8
18.5
19.0
21.0
21.6
22.3
22.9
15.4
15.8
17.4
17.9
18.7
19.2
14.0
14.4
15.9
16.4
17.0
17.5
12.7
13.0
14.4
14.8
15.4
15.8
10.4
10.7
11.8
12.1
12.5
12.9
8.5
8.7
9.6
9.8
10.2
10.5
7.0
7.2
7.8
8.0
8.2
8.5
0.8
0.8
0.7
0.7
0.6
0.6
1.0
1.1
0.9
0.9
0.8
0.8
1.4
1.5
1.1
1.2
1.0
1.1
1.8
1.9
1.5
1.6
1.3
1.4
2.3
2.4
1.9
2.0
1.8
1.9
2.9
3.0
2.5
2.6
2.3
2.4
3.2
3.4
2.8
2.9
2.6
2.7
3.5
3.7
3.0
3.2
2.9
3.0
4.2
4.4
3.7
3.9
3.5
3.7
5.0
5.3
4.6
4.8
4.3
4.5
6.0
6.3
5.4
5.7
5.1
5.4
Operation not recommended
28.1
30.4
27.5
29.7
26.9
29.1
28.1
30.4
28.2
30.5
28.1
30.4
27.4
29.6
28.0
30.3
28.2
30.5
26.2
28.3
27.1
29.3
27.5
29.8
24.6
26.6
25.8
27.8
26.3
28.4
22.8
24.7
24.1
26.0
24.7
26.7
21.9
23.7
23.1
25.0
23.7
25.7
21.0
22.7
22.2
24.0
22.8
24.7
19.2
20.7
20.3
21.9
20.9
22.6
17.5
18.9
18.5
20.0
19.0
20.5
16.2
17.5
16.9
18.3
17.3
18.7
16.5
19.4
15.6
18.3
14.9
17.6
17.1
20.2
16.7
19.7
16.4
19.3
17.2
20.2
17.2
20.2
17.1
20.1
16.8
19.7
17.1
20.1
17.2
20.2
16.1
19.0
16.6
19.5
16.8
19.8
15.4
18.1
15.9
18.7
16.2
19.0
14.9
17.6
15.5
18.2
15.8
18.5
14.5
17.1
15.1
17.7
15.4
18.1
13.8
16.2
14.2
16.7
14.5
17.1
13.2
15.5
13.5
15.9
13.7
16.1
12.9
15.1
13.0
15.3
13.1
15.4
0.59
0.64
0.57
0.62
0.56
0.60
0.61
0.66
0.59
0.65
0.58
0.64
0.63
0.68
0.61
0.67
0.61
0.66
0.64
0.70
0.63
0.69
0.62
0.68
0.66
0.71
0.65
0.70
0.64
0.70
0.67
0.73
0.66
0.72
0.66
0.71
0.68
0.74
0.67
0.73
0.66
0.72
0.69
0.75
0.68
0.74
0.67
0.73
0.72
0.78
0.70
0.76
0.69
0.76
0.75
0.82
0.73
0.80
0.72
0.78
0.79
0.86
0.77
0.84
0.76
0.82
0.87
0.91
0.80
0.84
0.77
0.81
0.96
1.01
0.88
0.93
0.86
0.90
1.07
1.13
0.99
1.04
0.95
1.00
1.20
1.26
1.10
1.16
1.06
1.11
1.33
1.40
1.23
1.29
1.18
1.24
1.48
1.56
1.38
1.45
1.32
1.39
1.6
1.65
1.46
1.54
1.40
1.48
1.65
1.74
1.54
1.62
1.48
1.56
1.84
1.94
1.72
1.81
1.66
1.75
2.07
2.18
1.93
2.03
1.86
1.96
2.32
2.44
2.17
2.28
2.10
2.21
31.8
33.5
30.9
32.5
30.2
31.8
32.2
33.9
32.0
33.7
31.7
33.4
31.8
33.5
32.2
33.8
32.2
33.9
30.9
32.6
31.6
33.3
31.9
33.6
29.8
31.4
30.6
32.3
31.0
32.7
28.5
30.0
29.4
30.9
29.8
31.4
27.8
29.3
28.7
30.2
29.2
30.7
27.2
28.6
28.0
29.5
28.5
30.0
26.0
27.3
26.7
28.1
27.1
28.5
25.0
26.4
25.6
26.9
25.9
27.2
24.6
25.8
24.8
26.1
25.0
26.3
Airflow
CFM
HC
kW
HE
LAT
COP
HWC
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
680
950
15.4
16.1
17.1
17.8
17.9
18.7
18.4
19.2
19.8
20.7
20.8
21.7
21.3
22.3
22.5
23.5
23.7
24.7
24.3
25.4
25.2
26.4
26.6
27.8
27.4
28.6
28.0
29.3
29.6
31.0
30.5
31.9
30.9
32.2
32.7
34.2
33.8
35.3
32.3
33.8
34.4
35.9
35.5
37.1
33.8
35.3
36.0
37.6
37.2
38.9
1.64
1.46
1.65
1.47
1.65
1.47
1.65
1.47
1.66
1.48
1.66
1.48
1.67
1.49
1.67
1.49
1.69
1.50
1.69
1.50
1.70
1.51
1.71
1.52
1.72
1.53
1.72
1.53
1.74
1.55
1.75
1.56
1.76
1.57
1.80
1.60
1.81
1.61
1.79
1.6
1.8
1.6
1.8
1.6
1.81
1.61
1.85
1.65
1.89
1.68
10.4
11.1
12.1
12.8
12.9
13.7
13.3
14.2
14.7
15.6
15.7
16.7
16.2
17.2
17.3
18.4
18.5
19.6
19.1
20.3
20.0
21.2
21.3
22.6
22.0
23.4
22.6
24.0
24.2
25.7
25.0
26.6
25.3
26.9
27.1
28.8
28.1
29.8
26.7
28.4
28.6
30.4
29.6
31.5
28.1
29.8
30.1
31.9
31.2
33.1
90.9
85.7
93.3
87.4
94.4
88.2
95.0
88.7
96.9
90.1
98.3
91.2
99.0
91.7
100.6
92.9
102.2
94.1
103.1
94.8
104.3
95.7
106.2
97.1
107.3
97.9
108.1
98.5
110.3
100.2
111.6
101.1
112.0
101.4
114.6
103.3
116.0
104.4
114.0
102.9
116.8
105.0
118.3
106.1
116.0
104.4
119.0
106.6
120.7
107.9
2.7
3.2
3.0
3.6
3.2
3.7
3.3
3.8
3.5
4.1
3.7
4.3
3.7
4.4
3.9
4.6
4.1
4.8
4.2
5.0
4.4
5.1
4.6
5.4
4.7
5.5
4.8
5.6
5.0
5.9
5.1
6.0
5.1
6.0
5.3
6.3
5.5
6.4
5.3
6.2
5.5
6.5
5.6
6.6
5.5
6.4
5.7
6.7
5.8
6.8
1.7
1.5
2.0
1.8
2.1
1.9
2.1
1.9
2.4
2.1
2.6
2.3
2.6
2.3
2.8
2.5
2.9
2.6
3.0
2.7
3.1
2.8
3.4
3.0
3.5
3.1
3.6
3.2
3.8
3.4
3.9
3.5
3.9
3.5
4.2
3.7
4.3
3.8
4.1
3.7
4.3
3.9
4.4
4.0
4.3
3.8
4.5
4.0
4.6
4.1
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 16
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 030 (PSC Blower)
1000 CFM Nominal (Rated) Airflow Cooling,1000 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
PSI
FT
Airflow
CFM
2.7
2.7
0.9
0.9
1.6
1.6
2.5
2.5
0.8
0.8
1.5
1.5
2.3
2.3
0.8
0.8
1.4
1.4
2.2
2.2
0.7
0.7
1.3
1.3
2.1
2.1
0.7
0.7
1.3
1.3
2.0
2.0
0.7
0.7
1.3
1.3
2.0
2.0
0.7
0.7
1.3
1.3
2.0
2.0
0.7
0.7
1.3
1.3
2.0
2.0
0.7
0.7
1.3
1.3
1.9
1.9
0.7
0.7
1.2
1.2
1.9
1.9
0.7
0.7
1.2
1.2
1.9
1.9
6.2
6.2
2.0
2.0
3.6
3.6
5.7
5.7
1.8
1.8
3.4
3.4
5.3
5.3
1.8
1.8
3.2
3.2
5.0
5.0
1.7
1.7
3.1
3.1
4.8
4.8
1.7
1.7
3.0
3.0
4.7
4.7
1.7
1.7
3.0
3.0
4.6
4.6
1.7
1.7
2.9
2.9
4.6
4.6
1.7
1.7
2.9
2.9
4.5
4.5
1.7
1.7
2.9
2.9
4.5
4.5
1.7
1.7
2.8
2.8
4.4
4.4
1.6
1.6
2.8
2.8
4.3
4.3
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
31.8
34.4
30.9
33.4
30.2
32.6
32.1
34.7
32.0
34.6
31.8
34.4
31.5
34.0
32.0
34.6
32.1
34.7
30.2
32.6
31.1
33.7
31.5
34.1
28.5
30.8
29.7
32.1
30.2
32.7
26.5
28.7
27.8
30.1
28.5
30.8
25.5
27.6
26.8
29.0
27.4
29.7
24.5
26.5
25.8
27.9
26.4
28.6
22.5
24.3
23.7
25.6
24.3
26.3
20.7
22.4
21.7
23.5
22.2
24.0
19.3
20.9
20.0
21.7
20.5
22.1
18.2
21.4
17.3
20.4
16.7
19.7
18.8
22.1
18.4
21.7
18.1
21.3
18.8
22.1
18.8
22.2
18.8
22.1
18.4
21.6
18.7
22.0
18.8
22.1
17.7
20.9
18.2
21.4
18.4
21.7
16.9
19.9
17.5
20.5
17.7
20.9
16.5
19.4
17.0
20.0
17.3
20.4
16.1
18.9
16.6
19.5
16.9
19.9
15.3
18.0
15.8
18.5
16.0
18.8
14.7
17.3
15.0
17.7
15.2
17.9
14.4
17.0
14.5
17.1
14.6
17.2
0.57
0.62
0.56
0.61
0.55
0.60
0.58
0.64
0.58
0.63
0.57
0.62
0.60
0.65
0.59
0.64
0.58
0.64
0.61
0.66
0.60
0.65
0.60
0.65
0.62
0.68
0.61
0.67
0.61
0.66
0.64
0.69
0.63
0.68
0.62
0.68
0.65
0.70
0.64
0.69
0.63
0.69
0.66
0.71
0.64
0.70
0.64
0.70
0.68
0.74
0.67
0.72
0.66
0.72
0.71
0.77
0.69
0.75
0.68
0.74
0.75
0.81
0.73
0.79
0.72
0.78
1.14
1.20
1.07
1.13
1.05
1.10
1.26
1.32
1.18
1.24
1.14
1.20
1.39
1.46
1.29
1.36
1.26
1.32
1.52
1.60
1.43
1.50
1.38
1.45
1.68
1.77
1.58
1.66
1.52
1.60
1.86
1.96
1.74
1.83
1.68
1.77
2.0
2.07
1.84
1.93
1.78
1.87
2.06
2.17
1.93
2.03
1.87
1.97
2.28
2.40
2.15
2.26
2.08
2.19
2.55
2.68
2.40
2.52
2.32
2.44
2.84
2.99
2.67
2.81
2.60
2.73
36.6
38.5
35.4
37.2
34.6
36.4
37.3
39.2
36.9
38.9
36.5
38.5
37.1
39.0
37.3
39.3
37.3
39.2
36.2
38.1
36.8
38.8
37.1
39.0
35.0
36.8
35.9
37.7
36.2
38.1
33.6
35.4
34.5
36.3
35.0
36.8
32.9
34.6
33.8
35.6
34.3
36.1
32.2
33.9
33.1
34.8
33.5
35.3
30.9
32.5
31.6
33.3
32.0
33.7
29.9
31.5
30.4
32.0
30.7
32.4
29.5
31.1
29.7
31.2
29.8
31.4
27.9
28.7
28.7
29.5
28.9
29.7
25.6
26.3
27.2
27.9
27.9
28.6
22.7
23.3
24.7
25.4
25.6
26.3
19.8
20.4
21.8
22.4
22.9
23.5
16.9
17.4
18.8
19.3
19.9
20.4
14.2
14.6
16.0
16.4
16.9
17.4
13.1
13.4
14.7
15.1
15.5
15.9
11.9
12.2
13.3
13.7
14.1
14.5
9.9
10.1
11.0
11.3
11.7
12.0
8.1
8.4
9.1
9.3
9.6
9.9
6.8
7.0
7.5
7.7
7.9
8.1
0.8
0.8
0.7
0.7
0.6
0.6
1.0
1.1
0.9
0.9
0.8
0.8
1.3
1.4
1.1
1.2
1.0
1.0
1.7
1.8
1.4
1.5
1.3
1.4
2.2
2.3
1.9
2.0
1.7
1.8
2.8
2.9
2.4
2.5
2.2
2.3
3.1
3.3
2.7
2.9
2.5
2.7
3.4
3.6
3.0
3.2
2.9
3.0
4.1
4.3
3.7
3.9
3.5
3.7
4.9
5.2
4.5
4.7
4.3
4.5
5.9
6.2
5.3
5.6
5.1
5.4
Airflow
CFM
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
HC
kW
HE
LAT
COP
HWC
18.6
19.4
20.7
21.6
21.6
22.6
22.1
23.1
23.9
25.0
25.1
26.2
25.7
26.8
27.2
28.4
28.5
29.8
29.3
30.6
30.4
31.8
32.0
33.4
32.8
34.3
33.7
35.2
35.4
37.0
36.4
38.0
36.9
38.6
38.8
40.6
39.9
41.7
38.5
40.2
40.5
42.3
41.6
43.5
40.1
41.9
42.2
44.1
43.3
45.3
2.06
1.83
2.10
1.87
2.11
1.88
2.12
1.89
2.15
1.91
2.16
1.92
2.17
1.93
2.18
1.94
2.20
1.96
2.20
1.96
2.21
1.97
2.24
1.99
2.25
2.00
2.26
2.01
2.28
2.03
2.29
2.04
2.30
2.05
2.34
2.08
2.36
2.10
2.33
2.1
2.4
2.1
2.4
2.1
2.36
2.10
2.42
2.15
2.45
2.18
12.4
13.2
14.3
15.2
15.2
16.2
15.7
16.7
17.4
18.5
18.5
19.6
19.1
20.3
20.5
21.8
21.8
23.1
22.5
23.9
23.6
25.1
25.1
26.6
25.9
27.5
26.7
28.4
28.3
30.1
29.2
31.0
29.8
31.6
31.5
33.5
32.5
34.5
31.2
33.2
33.1
35.1
34.1
36.2
32.7
34.7
34.6
36.8
35.6
37.8
93.9
88.0
96.6
90.0
97.8
90.9
98.4
91.4
100.8
93.1
102.2
94.2
103.0
94.9
105.0
96.3
106.7
97.6
107.6
98.3
109.1
99.5
111.1
100.9
112.2
101.8
113.3
102.6
115.5
104.3
116.8
105.2
117.5
105.7
119.9
107.6
121.3
108.6
119.5
107.3
122.1
109.2
123.5
110.2
121.6
108.8
124.3
110.8
125.7
111.9
2.6
3.1
2.9
3.4
3.0
3.5
3.1
3.6
3.3
3.8
3.4
4.0
3.5
4.1
3.7
4.3
3.8
4.5
3.9
4.6
4.0
4.7
4.2
4.9
4.3
5.0
4.4
5.1
4.5
5.3
4.6
5.5
4.7
5.5
4.9
5.7
4.9
5.8
4.8
5.7
5.0
5.9
5.1
6.0
5.0
5.9
5.1
6.0
5.2
6.1
1.7
1.5
1.9
1.7
2.0
1.8
2.1
1.9
2.2
2.0
2.5
2.2
2.6
2.3
2.7
2.4
2.9
2.6
3.0
2.7
3.0
2.7
3.3
2.9
3.4
3.0
3.4
3.0
3.7
3.3
3.8
3.4
3.8
3.4
4.0
3.6
4.2
3.7
4.0
3.6
4.2
3.8
4.4
3.9
4.2
3.7
4.4
3.9
4.6
4.1
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 17
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 030 (ECM Blower)
1,000 CFM Nominal (Rated) Airflow Cooling, 1,100 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
3.8
3.8
5.6
5.6
7.5
7.5
PSI
FT
Airflow
CFM
2.7
2.7
0.9
0.9
1.6
1.6
2.5
2.5
0.8
0.8
1.5
1.5
2.3
2.3
0.8
0.8
1.4
1.4
2.2
2.2
0.7
0.7
1.3
1.3
2.1
2.1
0.7
0.7
1.3
1.3
2.0
2.0
0.7
0.7
1.3
1.3
2.0
2.0
0.7
0.7
1.3
1.3
2.0
2.0
0.7
0.7
1.3
1.3
2.0
2.0
0.7
0.7
1.3
1.3
1.9
1.9
0.7
0.7
1.2
1.2
1.9
1.9
0.7
0.7
1.2
1.2
1.9
1.9
6.2
6.2
2.0
2.0
3.6
3.6
5.7
5.7
1.8
1.8
3.4
3.4
5.3
5.3
1.8
1.8
3.2
3.2
5.0
5.0
1.7
1.7
3.1
3.1
4.8
4.8
1.7
1.7
3.0
3.0
4.7
4.7
1.7
1.7
3.0
3.0
4.6
4.6
1.7
1.7
2.9
2.9
4.6
4.6
1.7
1.7
2.9
2.9
4.5
4.5
1.7
1.7
2.9
2.9
4.5
4.5
1.7
1.7
2.8
2.8
4.4
4.4
1.6
1.6
2.8
2.8
4.3
4.3
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
720
1000
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
31.8
34.4
30.9
33.4
30.2
32.6
32.1
34.7
32.0
34.6
31.8
34.4
31.5
34.0
32.0
34.6
32.1
34.7
30.2
32.7
31.1
33.7
31.5
34.1
28.5
30.8
29.7
32.1
30.2
32.7
26.6
28.7
27.8
30.1
28.5
30.8
25.5
27.6
26.8
29.0
27.5
29.7
24.5
26.5
25.8
27.9
26.4
28.6
22.5
24.3
23.7
25.6
24.3
26.3
20.7
22.4
21.7
23.5
22.2
24.1
19.3
20.9
20.0
21.7
20.5
22.1
18.2
21.4
17.3
20.3
16.7
19.7
18.8
22.1
18.4
21.7
18.1
21.3
18.8
22.1
18.8
22.2
18.8
22.1
18.4
21.6
18.7
22.0
18.8
22.1
17.7
20.9
18.2
21.4
18.4
21.7
16.9
19.9
17.5
20.6
17.7
20.9
16.5
19.4
17.0
20.1
17.3
20.4
16.1
18.9
16.6
19.6
16.9
19.9
15.3
18.0
15.8
18.5
16.0
18.8
14.7
17.3
15.0
17.7
15.2
17.9
14.4
17.0
14.5
17.1
14.6
17.2
0.57
0.62
0.56
0.61
0.55
0.60
0.58
0.64
0.58
0.63
0.57
0.62
0.60
0.65
0.59
0.64
0.58
0.64
0.61
0.66
0.60
0.65
0.60
0.65
0.62
0.68
0.61
0.67
0.61
0.66
0.64
0.69
0.63
0.68
0.62
0.68
0.65
0.70
0.64
0.69
0.63
0.69
0.66
0.71
0.64
0.70
0.64
0.70
0.68
0.74
0.67
0.72
0.66
0.72
0.71
0.77
0.69
0.75
0.68
0.74
0.75
0.81
0.72
0.79
0.71
0.78
1.10
1.16
1.04
1.09
1.01
1.06
1.22
1.28
1.14
1.20
1.10
1.16
1.35
1.42
1.26
1.32
1.22
1.28
1.48
1.56
1.39
1.46
1.34
1.41
1.65
1.73
1.54
1.62
1.48
1.56
1.82
1.91
1.70
1.79
1.65
1.73
1.9
2.02
1.80
1.89
1.74
1.83
2.02
2.12
1.89
1.99
1.84
1.93
2.24
2.36
2.11
2.22
2.04
2.15
2.51
2.64
2.36
2.48
2.28
2.40
2.81
2.95
2.63
2.77
2.55
2.68
36.4
38.4
35.2
37.1
34.4
36.2
37.2
39.1
36.8
38.7
36.4
38.3
36.9
38.9
37.2
39.1
37.1
39.1
36.1
38.0
36.7
38.7
36.9
38.9
34.9
36.7
35.7
37.6
36.1
38.0
33.5
35.2
34.4
36.2
34.9
36.7
32.8
34.5
33.7
35.4
34.1
35.9
32.1
33.8
32.9
34.7
33.4
35.2
30.8
32.4
31.5
33.2
31.9
33.6
29.8
31.4
30.3
31.9
30.6
32.2
29.4
31.0
29.6
31.1
29.7
31.3
28.8
29.6
29.8
30.6
29.9
30.8
26.4
27.1
28.1
28.9
28.8
29.6
23.3
24.0
25.5
26.2
26.4
27.1
20.4
20.9
22.4
23.1
23.5
24.2
17.3
17.8
19.3
19.8
20.4
21.0
14.6
15.0
16.4
16.8
17.3
17.8
13.4
13.8
15.0
15.4
15.9
16.3
12.2
12.5
13.6
14.0
14.4
14.8
10.0
10.3
11.2
11.5
11.9
12.2
8.3
8.5
9.2
9.5
9.7
10.0
6.9
7.1
7.6
7.8
8.0
8.3
0.8
0.8
0.7
0.7
0.6
0.6
1.0
1.1
0.9
0.9
0.8
0.8
1.3
1.4
1.1
1.2
1.0
1.0
1.7
1.8
1.4
1.5
1.3
1.4
2.2
2.3
1.9
2.0
1.7
1.8
2.8
2.9
2.4
2.5
2.2
2.3
3.1
3.3
2.7
2.9
2.5
2.7
3.4
3.6
3.0
3.2
2.9
3.0
4.1
4.3
3.7
3.9
3.5
3.7
4.9
5.2
4.5
4.7
4.3
4.5
5.9
6.2
5.3
5.6
5.1
5.4
Airflow
CFM
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
790
1100
HC
kW
HE
LAT
COP
HWC
18.8
19.7
20.9
21.9
21.9
22.9
22.4
23.4
24.2
25.3
25.4
26.5
26.0
27.2
27.5
28.7
28.9
30.2
29.6
31.0
30.8
32.2
32.4
33.8
33.2
34.7
34.1
35.6
35.8
37.4
36.8
38.5
37.3
39.0
39.3
41.0
40.3
42.1
38.9
40.7
41.0
42.8
42.1
44.0
40.6
42.4
42.7
44.6
43.8
45.8
2.09
1.86
2.12
1.89
2.15
1.91
2.15
1.91
2.18
1.94
2.19
1.95
2.20
1.96
2.21
1.97
2.23
1.98
2.24
1.99
2.25
2.00
2.27
2.02
2.27
2.02
2.28
2.03
2.30
2.05
2.33
2.07
2.33
2.07
2.37
2.11
2.39
2.13
2.36
2.1
2.4
2.1
2.4
2.2
2.39
2.13
2.45
2.18
2.48
2.21
12.6
13.3
14.5
15.4
15.4
16.4
15.9
16.9
17.6
18.7
18.7
19.9
19.3
20.5
20.7
22.0
22.1
23.4
22.8
24.2
23.9
25.4
25.4
26.9
26.2
27.8
27.0
28.7
28.7
30.4
29.6
31.4
30.1
31.9
31.9
33.9
32.9
34.9
31.6
33.5
33.4
35.5
34.5
36.6
33.1
35.1
35.0
37.2
36.0
38.2
92.1
86.6
94.5
88.4
95.7
89.3
96.3
89.7
98.4
91.3
99.7
92.3
100.5
92.9
102.2
94.2
103.8
95.4
104.7
96.1
106.1
97.1
107.9
98.5
108.9
99.2
109.9
100.0
112.0
101.5
113.1
102.4
113.8
102.8
116.0
104.5
117.3
105.5
115.6
104.3
118.0
106.0
119.3
107.0
117.5
105.7
120.0
107.5
121.3
108.5
2.6
3.1
2.9
3.4
3.0
3.5
3.1
3.6
3.3
3.8
3.4
4.0
3.5
4.1
3.6
4.3
3.8
4.5
3.9
4.6
4.0
4.7
4.2
4.9
4.3
5.0
4.4
5.1
4.6
5.4
4.6
5.4
4.7
5.5
4.9
5.7
4.9
5.8
4.8
5.7
5.0
5.9
5.1
5.9
5.0
5.8
5.1
6.0
5.2
6.1
1.7
1.5
1.9
1.7
2.0
1.8
2.1
1.9
2.2
2.0
2.5
2.2
2.6
2.3
2.7
2.4
2.9
2.6
3.0
2.7
3.0
2.7
3.3
2.9
3.4
3.0
3.4
3.0
3.7
3.3
3.8
3.4
3.8
3.4
4.0
3.6
4.2
3.7
4.0
3.6
4.2
3.8
4.4
3.9
4.2
3.7
4.4
3.9
4.6
4.1
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 18
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 036 (PSC Blower)
1,200 CFM Nominal (Rated) Airflow Cooling, 1,200 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
PSI
FT
Airflow
CFM
4.3
4.3
1.2
1.2
2.4
2.4
3.8
3.8
1.0
1.0
2.1
2.1
3.4
3.4
0.9
0.9
1.9
1.9
3.2
3.2
0.8
0.8
1.8
1.8
3.0
3.0
0.8
0.8
1.7
1.7
2.9
2.9
0.8
0.8
1.7
1.7
2.8
2.8
0.8
0.8
1.6
1.6
2.8
2.8
0.8
0.8
1.6
1.6
2.7
2.7
0.8
0.8
1.6
1.6
2.7
2.7
0.7
0.7
1.6
1.6
2.6
2.6
0.6
0.6
1.5
1.5
2.5
2.5
9.9
9.9
2.8
2.8
5.5
5.5
8.8
8.8
2.3
2.3
4.8
4.8
7.9
7.9
2.0
2.0
4.4
4.4
7.3
7.3
1.8
1.8
4.1
4.1
6.9
6.9
1.8
1.8
3.9
3.9
6.6
6.6
1.8
1.8
3.8
3.8
6.4
6.4
1.8
1.8
3.8
3.8
6.4
6.4
1.8
1.8
3.8
3.8
6.3
6.3
1.8
1.8
3.7
3.7
6.2
6.2
1.7
1.7
3.6
3.6
6.1
6.1
1.5
1.5
3.3
3.3
5.8
5.8
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
33.1
35.8
31.2
33.7
30.0
32.5
34.9
37.8
34.0
36.8
33.3
36.0
35.4
38.3
35.2
38.1
35.0
37.8
34.8
37.7
35.3
38.2
35.4
38.3
33.6
36.3
34.5
37.3
34.8
37.6
31.9
34.5
33.0
35.7
33.5
36.3
30.9
33.4
32.1
34.7
32.6
35.3
29.9
32.3
31.1
33.7
31.8
34.3
27.7
30.0
29.0
31.4
29.7
32.1
25.6
27.6
26.8
29.0
27.4
29.7
23.6
25.5
24.7
26.6
25.2
27.3
18.6
21.9
17.2
20.2
16.5
19.4
20.3
23.9
19.4
22.8
18.8
22.1
21.3
25.0
20.7
24.4
20.4
24.0
21.6
25.4
21.5
25.2
21.3
25.0
21.5
25.3
21.6
25.5
21.6
25.4
21.0
24.7
21.4
25.1
21.5
25.3
20.6
24.2
21.0
24.8
21.2
25.0
20.2
23.8
20.7
24.4
21.0
24.7
19.2
22.6
19.8
23.3
20.1
23.7
18.0
21.2
18.7
22.0
19.0
22.4
16.9
19.9
17.5
20.6
17.9
21.0
0.56
0.61
0.55
0.60
0.55
0.60
0.58
0.63
0.57
0.62
0.56
0.61
0.60
0.65
0.59
0.64
0.58
0.63
0.62
0.68
0.61
0.66
0.60
0.65
0.64
0.70
0.63
0.68
0.62
0.68
0.66
0.72
0.65
0.70
0.64
0.70
0.67
0.73
0.66
0.71
0.65
0.71
0.68
0.74
0.67
0.72
0.66
0.72
0.69
0.75
0.68
0.74
0.68
0.74
0.71
0.77
0.70
0.76
0.69
0.76
0.72
0.78
0.71
0.77
0.71
0.77
1.31
1.38
1.26
1.32
1.23
1.29
1.44
1.51
1.36
1.43
1.32
1.39
1.59
1.67
1.49
1.57
1.45
1.52
1.76
1.85
1.65
1.73
1.59
1.67
1.94
2.04
1.82
1.91
1.76
1.85
2.15
2.26
2.02
2.12
1.95
2.05
2.3
2.38
2.13
2.24
2.06
2.17
2.38
2.50
2.23
2.35
2.17
2.28
2.62
2.76
2.47
2.60
2.40
2.52
2.90
3.05
2.74
2.88
2.66
2.80
3.20
3.37
3.03
3.19
2.95
3.10
38.5
40.5
36.3
38.2
35.0
36.9
40.8
42.9
39.6
41.6
38.8
40.8
41.8
44.0
41.3
43.4
40.9
43.0
41.8
44.0
41.8
44.1
41.8
44.0
41.1
43.3
41.6
43.8
41.8
44.0
40.1
42.2
40.8
42.9
41.1
43.3
39.4
41.5
40.2
42.3
40.5
42.7
38.8
40.8
39.6
41.7
40.0
42.1
37.4
39.4
38.2
40.2
38.6
40.7
36.2
38.1
36.9
38.8
37.2
39.2
35.2
37.0
35.7
37.5
36.0
37.9
25.2
25.9
24.8
25.5
24.5
25.2
24.3
25.0
25.0
25.7
25.2
25.9
22.3
22.9
23.6
24.3
24.2
24.9
19.8
20.4
21.5
22.1
22.3
22.9
17.3
17.8
19.0
19.5
19.8
20.3
14.8
15.3
16.4
16.8
17.2
17.7
13.7
14.1
15.2
15.6
15.9
16.4
12.6
12.9
13.9
14.3
14.6
15.1
10.6
10.9
11.7
12.1
12.4
12.7
8.8
9.1
9.8
10.1
10.3
10.6
7.4
7.6
8.1
8.4
8.6
8.8
1.0
1.0
0.8
0.8
0.8
0.8
1.2
1.3
1.0
1.1
1.0
1.0
1.7
1.8
1.4
1.5
1.2
1.3
2.4
2.5
1.9
2.0
1.7
1.8
3.1
3.3
2.6
2.7
2.4
2.5
4.0
4.2
3.4
3.6
3.1
3.3
4.5
4.7
3.9
4.1
3.6
3.8
4.9
5.2
4.4
4.6
4.0
4.2
6.1
6.4
5.4
5.7
5.0
5.3
7.3
7.7
6.7
7.0
6.3
6.6
8.7
9.2
8.0
8.4
7.6
8.0
Airflow
CFM
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
HC
kW
HE
LAT
COP
HWC
22.3
23.3
24.4
25.5
25.3
26.5
25.9
27.1
27.9
29.2
29.2
30.5
29.9
31.3
31.8
33.2
33.3
34.8
34.2
35.8
35.7
37.3
37.6
39.2
38.6
40.3
39.6
41.4
41.6
43.5
42.7
44.6
43.4
45.3
45.4
47.5
46.4
48.5
45.1
47.1
47.0
49.1
48.0
50.1
46.8
48.9
48.6
50.8
49.5
51.8
2.37
2.11
2.38
2.12
2.39
2.13
2.41
2.14
2.43
2.16
2.45
2.18
2.46
2.19
2.48
2.21
2.52
2.24
2.53
2.25
2.55
2.27
2.59
2.30
2.61
2.32
2.63
2.34
2.66
2.37
2.69
2.39
2.70
2.40
2.74
2.44
2.77
2.46
2.74
2.4
2.8
2.5
2.8
2.5
2.78
2.47
2.81
2.50
2.83
2.52
15.2
16.1
17.2
18.2
18.1
19.2
18.6
19.8
20.5
21.8
21.8
23.1
22.4
23.8
24.1
25.6
25.6
27.2
26.5
28.1
27.8
29.6
29.6
31.4
30.5
32.4
31.5
33.5
33.4
35.4
34.4
36.5
35.0
37.1
36.9
39.1
37.8
40.1
36.6
38.8
38.4
40.7
39.2
41.6
38.1
40.5
39.8
42.3
40.7
43.2
94.0
88.0
96.2
89.7
97.3
90.4
97.9
90.9
100.1
92.5
101.5
93.6
102.2
94.1
104.2
95.6
105.9
96.9
106.8
97.6
108.5
98.8
110.4
100.3
111.5
101.1
112.7
102.0
114.8
103.6
116.0
104.4
116.7
105.0
118.9
106.6
120.0
107.4
118.5
106.4
120.6
107.9
121.7
108.7
120.4
107.7
122.4
109.2
123.3
109.9
2.8
3.2
3.0
3.5
3.1
3.6
3.2
3.7
3.4
4.0
3.5
4.1
3.6
4.2
3.7
4.4
3.9
4.6
4.0
4.7
4.1
4.8
4.3
5.0
4.3
5.1
4.4
5.2
4.6
5.4
4.7
5.5
4.7
5.5
4.9
5.7
4.9
5.8
4.8
5.7
5.0
5.8
5.0
5.9
4.9
5.8
5.1
6.0
5.1
6.0
2.4
2.1
2.7
2.4
2.9
2.6
3.0
2.7
3.3
2.9
3.5
3.1
3.6
3.2
3.8
3.4
4.0
3.6
4.2
3.7
4.4
3.9
4.6
4.1
4.7
4.2
4.9
4.4
5.2
4.6
5.3
4.7
5.4
4.8
5.7
5.1
5.8
5.2
5.7
5.1
6.0
5.3
6.1
5.5
6.0
5.3
6.2
5.5
6.4
5.7
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 19
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 036 (ECM Blower)
1,200 CFM Nominal (Rated) Airflow Cooling, 1,200 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
4.5
4.5
6.8
6.8
9.0
9.0
PSI
FT
Airflow
CFM
4.3
4.3
1.2
1.2
2.4
2.4
3.8
3.8
1.0
1.0
2.1
2.1
3.4
3.4
0.9
0.9
1.9
1.9
3.2
3.2
0.8
0.8
1.8
1.8
3.0
3.0
0.8
0.8
1.7
1.7
2.9
2.9
0.8
0.8
1.7
1.7
2.8
2.8
0.8
0.8
1.6
1.6
2.8
2.8
0.8
0.8
1.6
1.6
2.7
2.7
0.8
0.8
1.6
1.6
2.7
2.7
0.7
0.7
1.6
1.6
2.6
2.6
0.6
0.6
1.5
1.5
2.5
2.5
9.9
9.9
2.8
2.8
5.5
5.5
8.8
8.8
2.3
2.3
4.8
4.8
7.9
7.9
2.0
2.0
4.4
4.4
7.3
7.3
1.8
1.8
4.1
4.1
6.9
6.9
1.8
1.8
3.9
3.9
6.6
6.6
1.8
1.8
3.8
3.8
6.4
6.4
1.8
1.8
3.8
3.8
6.4
6.4
1.8
1.8
3.8
3.8
6.3
6.3
1.8
1.8
3.7
3.7
6.2
6.2
1.7
1.7
3.6
3.6
6.1
6.1
1.5
1.5
3.3
3.3
5.8
5.8
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
34.1
36.9
32.2
34.8
31.0
33.5
36.0
39.0
35.1
37.9
34.4
37.2
36.5
39.4
36.3
39.3
36.1
39.0
35.9
38.9
36.4
39.3
36.5
39.4
34.7
37.5
35.6
38.5
35.9
38.8
32.9
35.6
34.1
36.8
34.6
37.4
31.9
34.4
33.1
35.8
33.7
36.4
30.8
33.3
32.1
34.7
32.8
35.4
28.6
30.9
29.9
32.4
30.6
33.1
26.3
28.4
27.6
29.8
28.3
30.6
24.1
26.1
25.3
27.3
25.9
28.0
19.3
22.7
17.5
20.6
16.5
19.5
21.5
25.3
20.3
23.9
19.6
23.0
22.7
26.7
22.0
25.9
21.6
25.4
23.1
27.2
22.9
27.0
22.7
26.7
22.9
27.0
23.1
27.2
23.1
27.2
22.3
26.3
22.8
26.8
22.9
27.0
21.9
25.7
22.4
26.3
22.6
26.6
21.4
25.2
22.0
25.9
22.3
26.2
20.4
24.0
21.0
24.7
21.3
25.1
19.2
22.6
19.9
23.4
20.2
23.8
18.2
21.4
18.8
22.1
19.1
22.4
0.57
0.62
0.54
0.59
0.53
0.58
0.60
0.65
0.58
0.63
0.57
0.62
0.62
0.68
0.61
0.66
0.60
0.65
0.64
0.70
0.63
0.69
0.62
0.68
0.66
0.72
0.65
0.71
0.64
0.70
0.68
0.74
0.67
0.73
0.66
0.72
0.69
0.75
0.68
0.74
0.67
0.73
0.70
0.76
0.68
0.75
0.68
0.74
0.71
0.78
0.70
0.76
0.70
0.76
0.73
0.80
0.72
0.78
0.72
0.78
0.75
0.82
0.74
0.81
0.74
0.80
1.08
1.14
1.01
1.06
0.98
1.03
1.22
1.28
1.13
1.19
1.09
1.15
1.37
1.44
1.26
1.33
1.22
1.28
1.53
1.61
1.42
1.49
1.37
1.44
1.72
1.81
1.60
1.68
1.53
1.61
1.92
2.02
1.79
1.88
1.72
1.81
2.0
2.14
1.90
2.00
1.83
1.92
2.15
2.26
2.01
2.11
1.93
2.03
2.40
2.52
2.24
2.36
2.17
2.28
2.67
2.81
2.51
2.64
2.43
2.55
2.98
3.13
2.81
2.95
2.72
2.86
38.7
40.8
36.5
38.4
35.2
37.0
41.1
43.3
39.9
41.9
39.0
41.1
42.1
44.3
41.6
43.8
41.2
43.4
42.1
44.3
42.2
44.4
42.1
44.4
41.5
43.6
42.0
44.2
42.1
44.3
40.3
42.5
41.1
43.3
41.4
43.6
39.7
41.7
40.5
42.6
40.8
43.0
39.0
41.0
39.8
41.9
40.3
42.4
37.5
39.5
38.4
40.4
38.8
40.9
36.1
38.0
36.9
38.8
37.3
39.3
34.9
36.8
35.5
37.4
35.9
37.8
31.5
32.4
31.9
32.8
31.7
32.5
29.6
30.4
31.0
31.8
31.4
32.3
26.6
27.4
28.7
29.5
29.6
30.5
23.5
24.1
25.7
26.4
26.6
27.4
20.1
20.7
22.3
22.9
23.5
24.1
17.1
17.6
19.1
19.6
20.1
20.7
15.7
16.2
17.5
18.0
18.5
19.1
14.3
14.7
16.0
16.5
17.0
17.5
11.9
12.3
13.3
13.7
14.1
14.5
9.8
10.1
11.0
11.3
11.7
12.0
8.1
8.3
9.0
9.3
9.5
9.8
1.0
1.0
0.8
0.8
0.8
0.8
1.2
1.3
1.0
1.1
1.0
1.0
1.7
1.8
1.4
1.5
1.2
1.3
2.4
2.5
1.9
2.0
1.7
1.8
3.1
3.3
2.6
2.7
2.4
2.5
4.0
4.2
3.4
3.6
3.1
3.3
4.5
4.7
3.9
4.1
3.6
3.8
4.9
5.2
4.4
4.6
4.0
4.2
6.1
6.4
5.4
5.7
5.0
5.3
7.3
7.7
6.7
7.0
6.3
6.6
8.7
9.2
8.0
8.4
7.6
8.0
Airflow
CFM
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
860
1200
HC
kW
HE
LAT
COP
HWC
21.7
22.7
23.7
24.8
24.7
25.8
25.3
26.4
27.3
28.5
28.6
29.9
29.3
30.6
31.1
32.5
32.7
34.1
33.5
35.0
35.0
36.6
36.8
38.5
37.8
39.5
38.9
40.6
40.9
42.7
41.9
43.8
42.6
44.5
44.6
46.6
45.7
47.7
44.3
46.3
46.3
48.4
47.3
49.4
46.0
48.1
47.9
50.1
48.9
51.0
2.08
1.85
2.10
1.87
2.11
1.88
2.12
1.89
2.15
1.91
2.16
1.92
2.17
1.93
2.20
1.96
2.23
1.98
2.24
1.99
2.26
2.01
2.29
2.04
2.32
2.06
2.33
2.07
2.37
2.11
2.38
2.12
2.41
2.14
2.44
2.17
2.46
2.19
2.43
2.2
2.5
2.2
2.5
2.2
2.46
2.19
2.51
2.23
2.53
2.25
15.4
16.3
17.4
18.4
18.3
19.4
18.8
20.0
20.7
22.0
21.9
23.3
22.6
24.0
24.3
25.8
25.8
27.4
26.6
28.2
28.0
29.7
29.7
31.5
30.6
32.5
31.6
33.5
33.5
35.5
34.4
36.6
35.1
37.2
37.0
39.2
37.9
40.3
36.7
38.9
38.5
40.9
39.4
41.8
38.2
40.6
40.0
42.5
40.9
43.4
93.4
87.5
95.6
89.1
96.6
89.9
97.2
90.4
99.4
92.0
100.8
93.0
101.5
93.6
103.5
95.1
105.2
96.3
106.1
97.0
107.7
98.2
109.6
99.7
110.7
100.5
111.9
101.3
114.0
102.9
115.1
103.8
115.9
104.3
118.1
106.0
119.2
106.8
117.7
105.7
119.8
107.3
120.9
108.1
119.5
107.1
121.6
108.6
122.6
109.4
3.1
3.6
3.3
3.9
3.4
4.0
3.5
4.1
3.7
4.4
3.9
4.6
4.0
4.6
4.1
4.9
4.3
5.1
4.4
5.2
4.5
5.3
4.7
5.5
4.8
5.6
4.9
5.8
5.0
5.9
5.2
6.1
5.2
6.1
5.4
6.3
5.4
6.4
5.3
6.3
5.5
6.4
5.6
6.5
5.5
6.4
5.6
6.6
5.7
6.6
2.4
2.1
2.7
2.4
2.9
2.6
3.0
2.7
3.3
2.9
3.5
3.1
3.6
3.2
3.8
3.4
4.0
3.6
4.2
3.7
4.4
3.9
4.6
4.1
4.7
4.2
4.9
4.4
5.2
4.6
5.3
4.7
5.4
4.8
5.7
5.1
5.8
5.2
5.7
5.1
6.0
5.3
6.1
5.5
6.0
5.3
6.2
5.5
6.4
5.7
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 20
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 042 (PSC Blower)
1,400 CFM Nominal (Rated) Airflow Cooling, 1,400 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
PSI
FT
Airflow
CFM
3.7
3.7
1.0
1.0
2.0
2.0
3.4
3.4
0.9
0.9
1.9
1.9
3.2
3.2
0.8
0.8
1.7
1.7
3.1
3.1
0.8
0.8
1.7
1.7
3.0
3.0
0.8
0.8
1.6
1.6
2.9
2.9
0.8
0.8
1.6
1.6
2.9
2.9
0.8
0.8
1.6
1.6
2.9
2.9
0.8
0.8
1.6
1.6
2.9
2.9
0.8
0.8
1.6
1.6
2.8
2.8
0.8
0.8
1.6
1.6
2.8
2.8
0.7
0.7
1.5
1.5
2.7
2.7
8.5
8.5
2.3
2.3
4.6
4.6
7.9
7.9
2.0
2.0
4.3
4.3
7.5
7.5
1.8
1.8
4.0
4.0
7.1
7.1
1.8
1.8
3.9
3.9
6.9
6.9
1.7
1.7
3.8
3.8
6.7
6.7
1.8
1.8
3.7
3.7
6.7
6.7
1.8
1.8
3.7
3.7
6.6
6.6
1.8
1.8
3.7
3.7
6.6
6.6
1.8
1.8
3.6
3.6
6.5
6.5
1.7
1.7
3.6
3.6
6.4
6.4
1.6
1.6
3.5
3.5
6.3
6.3
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
39.5
42.7
36.4
39.4
34.6
37.4
42.3
45.7
40.9
44.2
39.9
43.1
42.7
46.2
42.7
46.1
42.3
45.8
41.7
45.1
42.5
46.0
42.7
46.2
39.8
43.0
41.1
44.5
41.7
45.1
37.3
40.4
38.9
42.1
39.7
42.9
36.0
38.9
37.6
40.7
38.4
41.5
34.6
37.5
36.3
39.2
37.1
40.1
32.0
34.6
33.5
36.2
34.3
37.1
29.8
32.2
31.0
33.5
31.6
34.2
28.2
30.5
28.9
31.3
29.4
31.8
23.0
27.1
20.1
23.7
18.6
21.8
26.1
30.7
24.5
28.8
23.4
27.5
27.2
32.0
26.7
31.4
26.1
30.8
27.1
31.9
27.3
32.1
27.2
32.0
26.2
30.8
26.8
31.6
27.1
31.9
24.8
29.2
25.7
30.2
26.1
30.7
24.0
28.3
25.0
29.4
25.4
29.9
23.3
27.4
24.2
28.5
24.7
29.0
21.9
25.8
22.7
26.7
23.1
27.2
20.9
24.6
21.4
25.2
21.7
25.5
20.6
24.3
20.7
24.3
20.8
24.4
0.58
0.63
0.55
0.60
0.54
0.58
0.62
0.67
0.60
0.65
0.59
0.64
0.64
0.69
0.63
0.68
0.62
0.67
0.65
0.71
0.64
0.70
0.64
0.69
0.66
0.72
0.65
0.71
0.65
0.71
0.66
0.72
0.66
0.72
0.66
0.72
0.67
0.73
0.66
0.72
0.66
0.72
0.67
0.73
0.67
0.73
0.66
0.72
0.68
0.74
0.68
0.74
0.67
0.73
0.70
0.76
0.69
0.75
0.69
0.75
0.73
0.80
0.71
0.78
0.71
0.77
1.35
1.42
1.26
1.33
1.24
1.30
1.50
1.58
1.41
1.48
1.36
1.43
1.66
1.75
1.56
1.64
1.50
1.58
1.84
1.93
1.72
1.81
1.66
1.75
2.04
2.14
1.90
2.00
1.84
1.94
2.25
2.37
2.11
2.22
2.04
2.15
2.4
2.51
2.23
2.35
2.16
2.27
2.51
2.64
2.35
2.47
2.27
2.39
2.80
2.94
2.62
2.76
2.54
2.67
3.13
3.29
2.94
3.09
2.84
2.99
3.52
3.70
3.30
3.47
3.20
3.36
45.2
47.6
41.7
43.9
39.7
41.8
48.6
51.1
46.8
49.3
45.6
48.0
49.6
52.2
49.1
51.7
48.6
51.2
49.1
51.7
49.5
52.1
49.6
52.2
47.8
50.3
48.7
51.3
49.1
51.7
46.0
48.5
47.2
49.7
47.7
50.3
45.1
47.5
46.2
48.7
46.8
49.3
44.1
46.5
45.3
47.7
45.9
48.3
42.4
44.6
43.4
45.7
43.9
46.2
41.2
43.4
41.8
44.0
42.2
44.4
41.0
43.1
41.0
43.1
41.1
43.2
29.3
30.1
28.8
29.6
28.0
28.7
28.1
28.9
29.1
29.9
29.3
30.2
25.7
26.4
27.3
28.1
28.2
29.0
22.7
23.4
24.7
25.4
25.7
26.4
19.6
20.1
21.6
22.2
22.6
23.2
16.6
17.0
18.4
19.0
19.4
20.0
15.2
15.6
16.9
17.4
17.9
18.4
13.8
14.2
15.4
15.9
16.3
16.8
11.5
11.8
12.8
13.1
13.5
13.9
9.5
9.8
10.5
10.8
11.1
11.4
8.0
8.2
8.8
9.0
9.2
9.5
1.7
1.8
1.8
1.9
1.8
1.9
1.8
1.9
1.7
1.8
1.7
1.8
2.2
2.3
1.9
2.0
1.9
2.0
2.7
2.8
2.4
2.5
2.2
2.3
3.3
3.5
2.9
3.1
2.7
2.8
4.2
4.4
3.6
3.8
3.4
3.6
4.7
4.9
4.1
4.3
3.8
4.1
5.1
5.4
4.6
4.8
4.3
4.5
6.4
6.7
5.6
5.9
5.3
5.6
7.7
8.1
6.9
7.3
6.6
6.9
9.3
9.8
8.4
8.8
8.0
8.4
Airflow
CFM
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
HC
kW
HE
LAT
COP
HWC
26.1
27.2
28.7
30.0
29.9
31.3
30.6
32.0
33.0
34.5
34.6
36.1
35.5
37.1
37.5
39.2
39.4
41.2
40.5
42.3
42.2
44.1
44.4
46.4
45.7
47.7
46.9
49.0
49.5
51.8
51.0
53.3
51.7
54.0
54.7
57.1
56.3
58.8
54.1
56.6
57.2
59.8
58.9
61.6
56.6
59.1
59.8
62.5
61.6
64.4
2.77
2.46
2.75
2.45
2.74
2.44
2.74
2.44
2.74
2.44
2.74
2.44
2.74
2.44
2.75
2.45
2.77
2.46
2.77
2.46
2.79
2.48
2.81
2.50
2.83
2.52
2.84
2.53
2.89
2.57
2.92
2.60
2.93
2.61
3.01
2.68
3.06
2.72
3.00
2.7
3.1
2.7
3.1
2.8
3.06
2.72
3.16
2.81
3.23
2.87
17.7
18.8
20.4
21.6
21.6
23.0
22.3
23.7
24.7
26.2
26.2
27.8
27.1
28.7
29.1
30.9
30.9
32.8
31.9
33.9
33.5
35.6
35.7
37.9
36.9
39.2
38.0
40.4
40.5
43.0
41.8
44.4
42.5
45.1
45.2
48.0
46.7
49.6
44.7
47.5
47.5
50.5
49.1
52.1
46.9
49.8
49.8
52.9
51.4
54.6
94.1
88.0
96.6
89.8
97.7
90.7
98.4
91.2
100.6
92.8
102.0
93.9
102.8
94.5
104.7
95.9
106.5
97.3
107.5
98.0
109.0
99.1
111.1
100.7
112.3
101.6
113.4
102.4
115.9
104.2
117.2
105.2
117.9
105.7
120.6
107.8
122.1
108.9
120.1
107.4
123.0
109.6
124.6
110.7
122.4
109.1
125.4
111.3
127.0
112.6
2.8
3.2
3.1
3.6
3.2
3.8
3.3
3.8
3.5
4.1
3.7
4.3
3.8
4.5
4.0
4.7
4.2
4.9
4.3
5.0
4.4
5.2
4.6
5.4
4.7
5.6
4.8
5.7
5.0
5.9
5.1
6.0
5.2
6.1
5.3
6.2
5.4
6.3
5.3
6.2
5.4
6.4
5.5
6.5
5.4
6.4
5.6
6.5
5.6
6.6
3.7
3.3
3.9
3.5
4.0
3.6
4.0
3.6
4.3
3.8
4.3
3.8
4.4
3.9
4.6
4.1
4.7
4.2
4.7
4.2
4.9
4.4
5.2
4.6
5.3
4.7
5.4
4.8
5.6
5.0
5.7
5.1
6.0
5.3
6.2
5.5
6.4
5.7
6.2
5.6
6.5
5.8
6.7
6.0
6.5
5.8
6.9
6.1
7.1
6.3
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 21
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 042 (ECM Blower)
1,400 CFM Nominal (Rated) Airflow Cooling, 1,400 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
5.3
5.3
7.9
7.9
10.5
10.5
PSI
FT
Airflow
CFM
3.7
3.7
1.0
1.0
2.0
2.0
3.4
3.4
0.9
0.9
1.9
1.9
3.2
3.2
0.8
0.8
1.7
1.7
3.1
3.1
0.8
0.8
1.7
1.7
3.0
3.0
0.8
0.8
1.6
1.6
2.9
2.9
0.8
0.8
1.6
1.6
2.9
2.9
0.8
0.8
1.6
1.6
2.9
2.9
0.8
0.8
1.6
1.6
2.9
2.9
0.8
0.8
1.6
1.6
2.8
2.8
0.8
0.8
1.6
1.6
2.8
2.8
0.7
0.7
1.5
1.5
2.7
2.7
8.5
8.5
2.3
2.3
4.6
4.6
7.9
7.9
2.0
2.0
4.3
4.3
7.5
7.5
1.8
1.8
4.0
4.0
7.1
7.1
1.8
1.8
3.9
3.9
6.9
6.9
1.7
1.7
3.8
3.8
6.7
6.7
1.8
1.8
3.7
3.7
6.7
6.7
1.8
1.8
3.7
3.7
6.6
6.6
1.8
1.8
3.7
3.7
6.6
6.6
1.8
1.8
3.6
3.6
6.5
6.5
1.7
1.7
3.6
3.6
6.4
6.4
1.6
1.6
3.5
3.5
6.3
6.3
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
39.4
42.6
36.3
39.3
34.5
37.3
42.3
45.7
40.9
44.2
39.9
43.1
42.7
46.2
42.6
46.1
42.3
45.7
41.7
45.1
42.5
46.0
42.7
46.2
39.8
43.1
41.2
44.5
41.7
45.1
37.4
40.4
39.0
42.1
39.7
42.9
36.0
39.0
37.6
40.7
38.4
41.6
34.7
37.5
36.3
39.3
37.1
40.2
32.1
34.7
33.6
36.3
34.4
37.1
29.8
32.2
31.0
33.5
31.7
34.2
28.2
30.5
29.0
31.3
29.4
31.8
22.9
27.0
20.1
23.6
18.5
21.8
26.1
30.7
24.4
28.7
23.4
27.5
27.2
32.0
26.6
31.4
26.1
30.7
27.1
31.9
27.3
32.1
27.2
32.0
26.2
30.8
26.8
31.6
27.1
31.9
24.8
29.2
25.7
30.2
26.1
30.7
24.1
28.3
25.0
29.4
25.4
29.9
23.3
27.4
24.2
28.5
24.7
29.1
21.9
25.8
22.7
26.7
23.1
27.2
20.9
24.6
21.4
25.2
21.7
25.6
20.6
24.2
20.7
24.3
20.8
24.5
0.58
0.63
0.55
0.60
0.54
0.58
0.62
0.67
0.60
0.65
0.59
0.64
0.64
0.69
0.62
0.68
0.62
0.67
0.65
0.71
0.64
0.70
0.64
0.69
0.66
0.72
0.65
0.71
0.65
0.71
0.66
0.72
0.66
0.72
0.66
0.72
0.67
0.73
0.66
0.72
0.66
0.72
0.67
0.73
0.67
0.73
0.66
0.72
0.68
0.74
0.68
0.74
0.67
0.73
0.70
0.76
0.69
0.75
0.69
0.75
0.73
0.79
0.71
0.78
0.71
0.77
1.20
1.26
1.12
1.18
1.08
1.14
1.35
1.42
1.26
1.32
1.22
1.28
1.51
1.59
1.41
1.48
1.36
1.43
1.69
1.78
1.57
1.65
1.52
1.60
1.88
1.98
1.76
1.85
1.69
1.78
2.11
2.22
1.97
2.07
1.90
2.00
2.2
2.35
2.09
2.20
2.02
2.12
2.36
2.48
2.21
2.32
2.13
2.24
2.64
2.78
2.47
2.60
2.40
2.52
2.98
3.13
2.79
2.93
2.69
2.83
3.37
3.54
3.15
3.31
3.04
3.20
44.6
47.0
41.1
43.3
39.1
41.2
48.0
50.5
46.3
48.7
45.1
47.5
49.1
51.6
48.6
51.2
48.1
50.6
48.6
51.2
49.0
51.6
49.1
51.6
47.3
49.8
48.3
50.8
48.6
51.2
45.6
48.0
46.7
49.2
47.3
49.7
44.6
47.0
45.8
48.2
46.3
48.8
43.7
46.0
44.8
47.2
45.4
47.8
41.9
44.2
42.9
45.2
43.4
45.7
40.7
42.9
41.3
43.5
41.7
43.9
40.5
42.6
40.5
42.6
40.6
42.7
32.9
33.8
32.4
33.3
31.8
32.7
31.3
32.2
32.6
33.5
32.7
33.7
28.3
29.1
30.3
31.1
31.1
32.0
24.7
25.4
27.1
27.9
28.1
28.9
21.2
21.8
23.4
24.0
24.6
25.3
17.7
18.2
19.8
20.3
20.9
21.5
16.2
16.7
18.1
18.6
19.2
19.7
14.7
15.1
16.5
16.9
17.4
17.9
12.1
12.5
13.6
14.0
14.3
14.7
10.0
10.3
11.1
11.4
11.8
12.1
8.4
8.6
9.2
9.5
9.7
9.9
1.7
1.8
1.8
1.9
1.8
1.9
1.8
1.9
1.7
1.8
1.7
1.8
2.2
2.3
1.9
2.0
1.9
2.0
2.7
2.8
2.4
2.5
2.2
2.3
3.3
3.5
2.9
3.1
2.7
2.8
4.2
4.4
3.6
3.8
3.4
3.6
4.7
4.9
4.1
4.3
3.8
4.1
5.1
5.4
4.6
4.8
4.3
4.5
6.3
6.6
5.6
5.9
5.3
5.6
7.7
8.1
6.9
7.3
6.6
6.9
9.3
9.8
8.4
8.8
8.0
8.4
Airflow
CFM
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
1000
1400
HC
kW
HE
LAT
COP
HWC
24.5
25.6
27.0
28.3
28.1
29.4
28.7
30.0
31.1
32.5
32.5
34.0
33.3
34.8
35.4
37.0
37.1
38.8
38.1
39.8
39.8
41.6
41.9
43.8
43.0
45.0
44.4
46.4
46.8
48.9
48.1
50.3
49.0
51.3
51.8
54.1
53.3
55.7
51.4
53.7
54.3
56.7
55.9
58.4
53.8
56.2
56.8
59.4
58.5
61.1
2.59
2.30
2.57
2.29
2.56
2.28
2.56
2.28
2.56
2.28
2.56
2.28
2.56
2.28
2.57
2.29
2.59
2.30
2.60
2.31
2.61
2.32
2.63
2.34
2.65
2.36
2.68
2.38
2.72
2.42
2.74
2.44
2.77
2.46
2.83
2.52
2.88
2.56
2.83
2.5
2.9
2.6
3.0
2.6
2.90
2.58
2.99
2.66
3.06
2.72
16.7
17.7
19.3
20.5
20.4
21.6
21.0
22.3
23.3
24.8
24.7
26.2
25.5
27.0
27.5
29.2
29.2
31.0
30.1
31.9
31.7
33.7
33.7
35.8
34.8
36.9
36.1
38.3
38.3
40.6
39.5
41.9
40.4
42.8
42.8
45.5
44.2
46.9
42.5
45.1
45.1
47.9
46.5
49.4
44.6
47.4
47.4
50.3
48.8
51.8
92.6
86.9
95.0
88.7
96.1
89.4
96.6
89.9
98.8
91.5
100.1
92.5
100.8
93.0
102.8
94.5
104.4
95.7
105.3
96.3
106.9
97.5
108.8
98.9
109.8
99.7
111.1
100.7
113.3
102.3
114.5
103.2
115.4
103.9
117.9
105.8
119.3
106.8
117.6
105.5
120.3
107.5
121.7
108.6
119.8
107.2
122.6
109.3
124.1
110.4
2.8
3.3
3.1
3.6
3.2
3.8
3.3
3.9
3.6
4.2
3.7
4.4
3.8
4.5
4.0
4.7
4.2
4.9
4.3
5.0
4.5
5.3
4.7
5.5
4.8
5.6
4.9
5.7
5.0
5.9
5.1
6.0
5.2
6.1
5.4
6.3
5.4
6.4
5.3
6.2
5.5
6.4
5.5
6.5
5.4
6.4
5.6
6.5
5.6
6.6
3.7
3.3
3.9
3.5
4.0
3.6
4.0
3.6
4.3
3.8
4.3
3.8
4.4
3.9
4.6
4.1
4.7
4.2
4.7
4.2
4.9
4.4
5.2
4.6
5.3
4.7
5.4
4.8
5.6
5.0
5.7
5.1
6.0
5.3
6.2
5.5
6.4
5.7
6.2
5.6
6.5
5.8
6.7
6.0
6.5
5.8
6.9
6.1
7.1
6.3
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 22
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 048 (PSC Blower)
1,600 CFM Nominal (Rated) Airflow Cooling, 1,600 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
PSI
FT
Airflow
CFM
4.2
4.2
1.1
1.1
2.3
2.3
3.8
3.8
0.9
0.9
2.1
2.1
3.5
3.5
0.8
0.8
1.9
1.9
3.3
3.3
0.8
0.8
1.8
1.8
3.1
3.1
0.8
0.8
1.8
1.8
3.1
3.1
0.8
0.8
1.7
1.7
3.0
3.0
0.8
0.8
1.7
1.7
3.0
3.0
0.8
0.8
1.7
1.7
3.0
3.0
0.8
0.8
1.7
1.7
3.0
3.0
0.7
0.7
1.7
1.7
2.9
2.9
0.7
0.7
1.6
1.6
2.8
2.8
9.6
9.6
2.6
2.6
5.3
5.3
8.7
8.7
2.1
2.1
4.8
4.8
8.0
8.0
1.9
1.9
4.4
4.4
7.6
7.6
1.8
1.8
4.2
4.2
7.3
7.3
1.7
1.7
4.1
4.1
7.1
7.1
1.7
1.7
4.0
4.0
7.0
7.0
1.7
1.7
4.0
4.0
6.9
6.9
1.8
1.8
4.0
4.0
6.9
6.9
1.8
1.8
4.0
4.0
6.8
6.8
1.7
1.7
3.9
3.9
6.7
6.7
1.5
1.5
3.7
3.7
6.5
6.5
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
47.8
51.7
44.4
48.0
42.4
45.9
50.7
54.8
49.1
53.1
47.9
51.8
51.3
55.4
51.0
55.2
50.6
54.7
50.3
54.4
51.1
55.3
51.3
55.4
48.4
52.3
49.8
53.9
50.4
54.5
45.7
49.4
47.6
51.5
48.5
52.4
44.2
47.8
46.2
49.9
47.1
51.0
42.7
46.2
44.8
48.4
45.8
49.5
39.6
42.8
41.6
45.0
42.7
46.1
36.6
39.5
38.4
41.5
39.4
42.6
33.9
36.6
35.4
38.3
36.3
39.3
26.4
31.0
23.5
27.7
22.0
25.9
29.3
34.5
27.6
32.4
26.5
31.1
30.6
36.0
29.8
35.1
29.2
34.4
30.8
36.3
30.8
36.2
30.6
36.0
30.2
35.6
30.7
36.1
30.8
36.3
29.2
34.3
29.9
35.2
30.3
35.6
28.5
33.5
29.3
34.5
29.7
35.0
27.8
32.7
28.7
33.8
29.2
34.3
26.3
31.0
27.3
32.1
27.8
32.7
25.0
29.4
25.8
30.4
26.3
30.9
24.0
28.2
24.5
28.9
24.9
29.3
0.55
0.60
0.53
0.58
0.52
0.56
0.58
0.63
0.56
0.61
0.55
0.60
0.60
0.65
0.58
0.64
0.58
0.63
0.61
0.67
0.60
0.66
0.60
0.65
0.63
0.68
0.62
0.67
0.61
0.67
0.64
0.69
0.63
0.68
0.62
0.68
0.64
0.70
0.64
0.69
0.63
0.69
0.65
0.71
0.64
0.70
0.64
0.69
0.67
0.72
0.66
0.71
0.65
0.71
0.68
0.74
0.67
0.73
0.67
0.72
0.71
0.77
0.69
0.75
0.69
0.75
2.01
2.11
1.85
1.95
1.79
1.88
2.23
2.35
2.08
2.19
2.01
2.11
2.46
2.59
2.30
2.42
2.23
2.34
2.71
2.85
2.54
2.67
2.45
2.58
2.98
3.13
2.79
2.93
2.69
2.83
3.27
3.44
3.06
3.22
2.97
3.12
3.4
3.62
3.22
3.39
3.11
3.28
3.60
3.79
3.38
3.55
3.26
3.43
3.98
4.18
3.73
3.92
3.60
3.79
4.40
4.63
4.13
4.34
3.99
4.20
4.90
5.15
4.58
4.82
4.44
4.67
56.0
58.9
52.0
54.7
49.7
52.3
59.7
62.8
57.5
60.5
56.0
59.0
61.1
64.3
60.3
63.5
59.6
62.7
60.9
64.1
61.1
64.4
61.0
64.2
59.8
63.0
60.7
63.9
61.0
64.2
58.1
61.2
59.4
62.5
59.9
63.0
57.1
60.2
58.4
61.5
59.0
62.1
56.2
59.1
57.5
60.5
58.2
61.2
54.2
57.1
55.5
58.4
56.1
59.1
52.5
55.3
53.5
56.3
54.1
57.0
51.5
54.2
52.0
54.8
52.4
55.2
23.8
24.5
24.0
24.6
23.7
24.4
22.7
23.3
23.6
24.2
23.9
24.5
20.8
21.4
22.2
22.8
22.7
23.4
18.6
19.1
20.1
20.7
20.9
21.5
16.2
16.7
17.9
18.4
18.7
19.3
14.0
14.4
15.5
16.0
16.3
16.8
12.9
13.3
14.4
14.8
15.2
15.6
11.9
12.2
13.3
13.6
14.0
14.4
10.0
10.2
11.2
11.5
11.8
12.2
8.3
8.5
9.3
9.6
9.9
10.1
6.9
7.1
7.7
8.0
8.2
8.4
1.7
1.8
1.8
1.9
1.8
1.9
1.9
2.0
1.7
1.8
1.7
1.8
2.3
2.4
2.0
2.1
1.9
2.0
2.8
2.9
2.4
2.5
2.2
2.3
3.5
3.7
2.9
3.1
2.8
2.9
4.4
4.6
3.7
3.9
3.4
3.6
4.9
5.2
4.2
4.4
3.9
4.1
5.4
5.7
4.7
4.9
4.4
4.6
6.6
6.9
5.8
6.1
5.4
5.7
8.0
8.4
7.1
7.5
6.7
7.0
9.5
10.0
8.6
9.0
8.1
8.5
Airflow
CFM
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
1150
1600
HC
kW
HE
LAT
COP
HWC
34.6
36.1
37.3
39.0
38.9
40.7
39.8
41.6
42.3
44.2
44.3
46.3
45.4
47.5
47.6
49.7
50.0
52.2
51.3
53.6
52.9
55.3
55.7
58.2
57.2
59.8
58.4
61.0
61.5
64.2
63.2
66.0
63.8
66.6
67.1
70.1
68.9
72.0
66.4
69.4
69.8
73.0
71.7
74.9
69.0
72.1
72.6
75.8
74.4
77.8
3.78
3.36
3.78
3.36
3.79
3.37
3.80
3.38
3.82
3.40
3.84
3.42
3.86
3.43
3.89
3.46
3.93
3.50
3.96
3.52
3.99
3.55
4.05
3.60
4.08
3.63
4.11
3.66
4.18
3.72
4.23
3.76
4.24
3.77
4.33
3.85
4.37
3.89
4.30
3.8
4.4
3.9
4.4
4.0
4.37
3.89
4.46
3.97
4.51
4.01
23.2
24.6
26.0
27.6
27.5
29.2
28.3
30.1
30.8
32.7
32.6
34.7
33.7
35.8
35.7
37.9
37.9
40.3
39.2
41.6
40.7
43.2
43.3
45.9
44.7
47.4
45.7
48.5
48.5
51.5
50.1
53.2
50.6
53.8
53.7
57.0
55.4
58.8
53.0
56.3
56.2
59.6
57.9
61.4
55.5
58.9
58.7
62.3
60.4
64.1
97.8
90.9
100.1
92.6
101.3
93.5
102.1
94.1
104.1
95.6
105.7
96.8
106.6
97.5
108.3
98.8
110.2
100.2
111.3
101.0
112.6
102.0
114.9
103.7
116.1
104.6
117.0
105.3
119.5
107.2
120.9
108.2
121.3
108.6
124.0
110.6
125.5
111.7
123.5
110.2
126.2
112.2
127.7
113.3
125.6
111.7
128.4
113.9
129.9
115.0
2.7
3.2
2.9
3.4
3.0
3.5
3.1
3.6
3.2
3.8
3.4
4.0
3.5
4.1
3.6
4.2
3.7
4.4
3.8
4.5
3.9
4.6
4.0
4.7
4.1
4.8
4.2
4.9
4.3
5.1
4.4
5.1
4.4
5.2
4.5
5.3
4.6
5.4
4.5
5.3
4.7
5.5
4.7
5.6
4.6
5.4
4.8
5.6
4.8
5.7
3.7
3.3
3.9
3.5
3.9
3.5
4.0
3.6
4.2
3.7
4.3
3.8
4.4
3.9
4.5
4.0
4.6
4.1
4.7
4.2
4.8
4.3
5.1
4.5
5.2
4.6
5.3
4.7
5.6
5.0
5.7
5.1
5.8
5.2
6.2
5.5
6.3
5.6
6.1
5.5
6.5
5.8
6.6
5.9
6.4
5.7
6.7
6.0
7.0
6.2
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 23
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 048 (ECM Blower)
1,550 CFM Nominal (Rated) Airflow Cooling, 1,650 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
6.0
6.0
9.0
9.0
12.0
12.0
PSI
FT
Airflow
CFM
4.2
4.2
1.1
1.1
2.3
2.3
3.8
3.8
0.9
0.9
2.1
2.1
3.5
3.5
0.8
0.8
1.9
1.9
3.3
3.3
0.8
0.8
1.8
1.8
3.1
3.1
0.8
0.8
1.8
1.8
3.1
3.1
0.8
0.8
1.7
1.7
3.0
3.0
0.8
0.8
1.7
1.7
3.0
3.0
0.8
0.8
1.7
1.7
3.0
3.0
0.8
0.8
1.7
1.7
3.0
3.0
0.7
0.7
1.7
1.7
2.9
2.9
0.7
0.7
1.6
1.6
2.8
2.8
9.6
9.6
2.6
2.6
5.3
5.3
8.7
8.7
2.1
2.1
4.8
4.8
8.0
8.0
1.9
1.9
4.4
4.4
7.6
7.6
1.8
1.8
4.2
4.2
7.3
7.3
1.7
1.7
4.1
4.1
7.1
7.1
1.7
1.7
4.0
4.0
7.0
7.0
1.7
1.7
4.0
4.0
6.9
6.9
1.8
1.8
4.0
4.0
6.9
6.9
1.8
1.8
4.0
4.0
6.8
6.8
1.7
1.7
3.9
3.9
6.7
6.7
1.5
1.5
3.7
3.7
6.5
6.5
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
1100
1550
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
47.7
51.5
44.3
47.9
42.3
45.7
50.6
54.7
49.0
53.0
47.8
51.7
51.3
55.4
51.0
55.2
50.6
54.7
50.4
54.5
51.1
55.3
51.3
55.4
48.4
52.4
49.9
53.9
50.4
54.5
45.8
49.6
47.7
51.5
48.5
52.5
44.3
47.9
46.3
50.0
47.2
51.0
42.8
46.3
44.9
48.5
45.8
49.6
39.7
42.9
41.7
45.1
42.7
46.2
36.6
39.6
38.5
41.6
39.5
42.7
34.0
36.7
35.5
38.4
36.4
39.3
26.3
30.9
23.4
27.6
21.9
25.8
29.2
34.4
27.5
32.3
26.4
31.0
30.6
36.0
29.8
35.1
29.2
34.3
30.8
36.3
30.8
36.2
30.6
36.0
30.3
35.6
30.7
36.1
30.8
36.3
29.2
34.3
30.0
35.3
30.3
35.6
28.5
33.5
29.4
34.5
29.7
35.0
27.8
32.8
28.8
33.8
29.2
34.4
26.4
31.0
27.3
32.1
27.8
32.7
25.0
29.4
25.8
30.4
26.3
30.9
24.0
28.2
24.6
28.9
24.9
29.3
0.55
0.60
0.53
0.58
0.52
0.56
0.58
0.63
0.56
0.61
0.55
0.60
0.60
0.65
0.58
0.64
0.58
0.63
0.61
0.67
0.60
0.65
0.60
0.65
0.62
0.68
0.62
0.67
0.61
0.67
0.64
0.69
0.63
0.68
0.62
0.68
0.64
0.70
0.63
0.69
0.63
0.69
0.65
0.71
0.64
0.70
0.64
0.69
0.66
0.72
0.65
0.71
0.65
0.71
0.68
0.74
0.67
0.73
0.67
0.72
0.71
0.77
0.69
0.75
0.69
0.75
1.71
1.80
1.57
1.65
1.50
1.58
1.95
2.05
1.80
1.89
1.72
1.81
2.18
2.29
2.02
2.12
1.94
2.04
2.43
2.55
2.25
2.37
2.17
2.28
2.69
2.83
2.50
2.63
2.41
2.53
2.98
3.13
2.78
2.92
2.68
2.82
3.1
3.31
2.93
3.09
2.83
2.98
3.31
3.48
3.09
3.25
2.98
3.13
3.68
3.87
3.43
3.61
3.32
3.49
4.11
4.32
3.83
4.03
3.71
3.90
4.60
4.84
4.30
4.52
4.15
4.36
54.8
57.7
50.8
53.5
48.6
51.1
58.6
61.7
56.5
59.4
55.0
57.9
60.1
63.2
59.3
62.4
58.6
61.6
60.0
63.2
60.2
63.4
60.0
63.2
58.9
62.0
59.8
62.9
60.0
63.2
57.2
60.2
58.4
61.5
59.0
62.1
56.3
59.2
57.5
60.5
58.1
61.2
55.3
58.2
56.6
59.6
57.2
60.3
53.3
56.1
54.5
57.4
55.2
58.1
51.6
54.4
52.6
55.4
53.2
56.0
50.6
53.2
51.1
53.8
51.5
54.2
27.9
28.6
28.2
29.0
28.2
28.9
26.0
26.7
27.3
28.0
27.8
28.6
23.5
24.2
25.3
26.0
26.1
26.8
20.8
21.4
22.7
23.3
23.6
24.3
18.0
18.5
19.9
20.5
21.0
21.6
15.4
15.8
17.2
17.7
18.1
18.6
14.2
14.6
15.8
16.3
16.7
17.2
12.9
13.3
14.5
14.9
15.4
15.8
10.8
11.1
12.1
12.5
12.9
13.2
8.9
9.2
10.0
10.3
10.6
10.9
7.4
7.6
8.3
8.5
8.8
9.0
1.7
1.8
1.8
1.9
1.8
1.9
1.9
2.0
1.7
1.8
1.7
1.8
2.3
2.4
2.0
2.1
1.9
2.0
2.8
2.9
2.4
2.5
2.2
2.3
3.5
3.7
2.9
3.1
2.8
2.9
4.4
4.6
3.7
3.9
3.4
3.6
4.9
5.2
4.2
4.4
3.9
4.1
5.4
5.7
4.7
4.9
4.4
4.6
6.6
6.9
5.8
6.1
5.4
5.7
8.0
8.4
7.1
7.5
6.7
7.0
9.5
10.0
8.6
9.0
8.1
8.5
Airflow
CFM
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
1200
1650
HC
kW
HE
LAT
COP
HWC
31.7
33.1
34.4
36.0
35.8
37.4
36.6
38.2
39.1
40.9
40.8
42.7
41.8
43.7
44.1
46.0
46.2
48.2
47.3
49.4
49.2
51.4
51.6
53.9
52.9
55.3
54.3
56.8
57.1
59.7
58.6
61.2
59.5
62.2
62.5
65.3
64.1
67.0
62.0
64.8
65.1
68.0
66.7
69.7
64.5
67.4
67.7
70.7
69.3
72.5
3.45
3.07
3.45
3.07
3.46
3.08
3.46
3.08
3.50
3.11
3.52
3.13
3.53
3.14
3.56
3.17
3.61
3.21
3.63
3.23
3.68
3.27
3.73
3.32
3.77
3.35
3.80
3.38
3.87
3.44
3.90
3.47
3.92
3.49
4.00
3.56
4.05
3.60
3.99
3.6
4.1
3.6
4.1
3.7
4.06
3.61
4.15
3.69
4.18
3.72
21.3
22.7
24.0
25.5
25.4
26.9
26.1
27.7
28.5
30.3
30.2
32.0
31.1
33.0
33.2
35.2
35.1
37.3
36.2
38.4
37.9
40.2
40.1
42.6
41.4
43.9
42.6
45.3
45.1
47.9
46.5
49.4
47.3
50.2
50.1
53.1
51.5
54.7
49.6
52.7
52.4
55.6
53.9
57.2
51.9
55.1
54.8
58.2
56.3
59.8
94.5
88.6
96.6
90.2
97.6
91.0
98.2
91.4
100.2
92.9
101.5
94.0
102.3
94.5
104.0
95.8
105.6
97.1
106.5
97.7
107.9
98.8
109.8
100.3
110.9
101.0
111.9
101.9
114.1
103.5
115.2
104.4
115.9
104.9
118.2
106.6
119.5
107.6
117.9
106.4
120.2
108.2
121.5
109.1
119.8
107.8
122.2
109.7
123.5
110.7
2.7
3.2
2.9
3.4
3.0
3.6
3.1
3.6
3.3
3.9
3.4
4.0
3.5
4.1
3.6
4.3
3.7
4.4
3.8
4.5
3.9
4.6
4.1
4.8
4.1
4.8
4.2
4.9
4.3
5.1
4.4
5.2
4.4
5.2
4.6
5.4
4.6
5.5
4.6
5.3
4.7
5.5
4.8
5.6
4.7
5.5
4.8
5.6
4.9
5.7
3.7
3.3
3.9
3.5
3.9
3.5
4.0
3.6
4.2
3.7
4.3
3.8
4.4
3.9
4.5
4.0
4.6
4.1
4.7
4.2
4.8
4.3
5.1
4.5
5.2
4.6
5.3
4.7
5.6
5.0
5.7
5.1
5.8
5.2
6.2
5.5
6.3
5.6
6.1
5.5
6.5
5.8
6.6
5.9
6.4
5.7
6.7
6.0
7.0
6.2
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 24
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 060 (PSC Blower)
1,950 CFM Nominal (Rated) Airflow Cooling, 1,950 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
PSI
FT
Airflow
CFM
7.2
7.2
1.3
1.3
3.5
3.5
6.1
6.1
0.9
0.9
2.9
2.9
5.3
5.3
0.6
0.6
2.5
2.5
4.7
4.7
0.5
0.5
2.2
2.2
4.3
4.3
0.5
0.5
2.1
2.1
4.1
4.1
0.5
0.5
2.0
2.0
4.0
4.0
0.5
0.5
2.0
2.0
4.0
4.0
0.5
0.5
2.0
2.0
3.9
3.9
0.5
0.5
1.9
1.9
3.9
3.9
0.4
0.4
1.8
1.8
3.8
3.8
0.1
0.1
1.6
1.6
3.7
3.7
16.6
16.6
3.0
3.0
8.1
8.1
14.1
14.1
2.0
2.0
6.7
6.7
12.2
12.2
1.4
1.4
5.7
5.7
10.9
10.9
1.1
1.1
5.1
5.1
10.0
10.0
1.1
1.1
4.8
4.8
9.5
9.5
1.1
1.1
4.6
4.6
9.2
9.2
1.1
1.1
4.6
4.6
9.1
9.1
1.2
1.2
4.5
4.5
9.1
9.1
1.1
1.1
4.5
4.5
9.0
9.0
0.8
0.8
4.2
4.2
8.8
8.8
0.3
0.3
3.8
3.8
8.5
8.5
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
68.4
74.0
66.0
71.4
64.2
69.5
69.5
75.1
68.9
74.5
68.2
73.7
68.6
74.1
69.4
75.0
69.5
75.1
66.3
71.7
68.1
73.6
68.8
74.3
63.2
68.3
65.5
70.9
66.6
72.0
59.5
64.4
62.2
67.2
63.5
68.6
57.6
62.3
60.3
65.1
61.6
66.6
55.7
60.2
58.3
63.1
59.7
64.5
51.9
56.1
54.4
58.8
55.7
60.2
48.6
52.5
50.7
54.8
51.8
56.1
46.1
49.8
47.6
51.4
48.5
52.4
43.6
51.3
41.7
49.0
40.4
47.6
44.8
52.8
44.0
51.8
43.4
51.0
45.0
52.9
45.0
52.9
44.8
52.7
44.3
52.2
44.9
52.8
45.0
53.0
43.2
50.8
44.1
51.9
44.4
52.3
41.8
49.1
42.8
50.4
43.3
51.0
41.0
48.2
42.0
49.5
42.6
50.1
40.2
47.3
41.3
48.6
41.8
49.2
38.7
45.5
39.7
46.7
40.2
47.3
37.6
44.2
38.3
45.0
38.7
45.5
37.2
43.7
37.3
43.9
37.6
44.2
0.64
0.69
0.63
0.69
0.63
0.69
0.65
0.70
0.64
0.70
0.64
0.69
0.66
0.71
0.65
0.71
0.64
0.70
0.67
0.73
0.66
0.72
0.65
0.71
0.68
0.74
0.67
0.73
0.67
0.73
0.70
0.76
0.69
0.75
0.68
0.74
0.71
0.77
0.70
0.76
0.69
0.75
0.72
0.79
0.71
0.77
0.70
0.76
0.75
0.81
0.73
0.79
0.72
0.79
0.77
0.84
0.76
0.82
0.75
0.81
0.81
0.88
0.78
0.85
0.77
0.84
2.41
2.53
2.26
2.38
2.20
2.31
2.63
2.77
2.46
2.59
2.39
2.51
2.89
3.04
2.69
2.83
2.61
2.74
3.18
3.34
2.96
3.11
2.85
3.00
3.52
3.70
3.26
3.43
3.15
3.31
3.90
4.10
3.62
3.81
3.49
3.67
4.1
4.33
3.83
4.03
3.69
3.88
4.34
4.56
4.03
4.24
3.88
4.08
4.85
5.10
4.51
4.74
4.34
4.56
5.45
5.73
5.05
5.31
4.86
5.11
6.15
6.47
5.69
5.98
5.48
5.76
78.5
82.6
75.5
79.5
73.5
77.4
80.3
84.6
79.2
83.4
78.2
82.3
80.3
84.5
80.5
84.7
80.2
84.4
78.9
83.1
80.0
84.2
80.3
84.6
76.9
80.9
78.4
82.6
79.1
83.3
74.4
78.3
76.2
80.2
77.1
81.1
73.2
77.1
74.9
78.9
75.8
79.8
72.0
75.8
73.7
77.5
74.5
78.5
69.9
73.5
71.2
75.0
72.0
75.8
68.5
72.1
69.3
72.9
69.8
73.5
68.3
71.9
68.2
71.8
68.4
72.0
28.4
29.2
29.2
30.0
29.2
30.1
26.4
27.1
28.0
28.8
28.6
29.4
23.7
24.4
25.8
26.5
26.7
27.4
20.9
21.5
23.0
23.7
24.1
24.8
18.0
18.5
20.1
20.7
21.2
21.8
15.3
15.7
17.2
17.6
18.2
18.7
14.1
14.4
15.8
16.3
16.8
17.3
12.8
13.2
14.5
14.9
15.4
15.8
10.7
11.0
12.1
12.4
12.8
13.2
8.9
9.2
10.0
10.3
10.7
11.0
7.5
7.7
8.4
8.6
8.8
9.1
1.9
2.0
1.7
1.8
1.7
1.8
2.2
2.3
1.9
2.0
1.8
1.9
2.8
2.9
2.3
2.4
2.2
2.3
3.4
3.6
2.9
3.1
2.7
2.8
4.3
4.5
3.6
3.8
3.3
3.5
5.3
5.6
4.6
4.8
4.2
4.4
5.9
6.2
5.1
5.4
4.7
5.0
6.5
6.8
5.7
6.0
5.2
5.5
7.9
8.3
6.9
7.3
6.5
6.8
9.4
9.9
8.4
8.8
7.9
8.3
11.3
11.9
10.1
10.6
9.5
10.0
Airflow
CFM
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
HC
kW
HE
LAT
COP
HWC
39.4
41.2
43.0
44.9
44.8
46.8
45.8
47.8
49.3
51.5
51.7
54.0
53.0
55.4
56.2
58.7
59.1
61.8
60.8
63.5
63.3
66.2
66.9
69.9
68.8
71.9
70.7
73.8
74.7
78.1
76.9
80.4
78.0
81.5
82.4
86.1
84.8
88.7
81.5
85.2
86.1
90.0
88.6
92.5
85.1
88.9
89.8
93.8
92.3
96.4
4.45
3.96
4.55
4.05
4.60
4.09
4.62
4.11
4.71
4.19
4.75
4.23
4.79
4.26
4.84
4.31
4.91
4.37
4.93
4.39
4.99
4.44
5.06
4.50
5.10
4.54
5.14
4.57
5.23
4.65
5.27
4.69
5.31
4.72
5.41
4.81
5.47
4.87
5.40
4.8
5.5
4.9
5.6
5.0
5.49
4.88
5.62
5.00
5.71
5.08
26.1
27.7
29.3
31.1
30.9
32.8
31.8
33.8
35.1
37.3
37.3
39.6
38.5
40.9
41.4
44.0
44.2
46.9
45.7
48.5
48.1
51.0
51.4
54.5
53.2
56.4
54.9
58.2
58.6
62.2
60.7
64.4
61.6
65.4
65.7
69.7
67.9
72.0
64.9
68.8
69.0
73.2
71.2
75.6
68.1
72.3
72.3
76.8
74.5
79.1
96.1
89.6
98.4
91.3
99.6
92.2
100.3
92.7
102.6
94.5
104.2
95.6
105.0
96.3
107.1
97.9
109.1
99.3
110.2
100.2
111.9
101.4
114.2
103.2
115.5
104.2
116.7
105.1
119.4
107.1
120.9
108.2
121.6
108.7
124.5
110.9
126.1
112.1
123.9
110.5
127.0
112.7
128.6
113.9
126.3
112.2
129.4
114.6
131.0
115.8
2.6
3.0
2.8
3.3
2.9
3.4
2.9
3.4
3.1
3.6
3.2
3.7
3.2
3.8
3.4
4.0
3.5
4.1
3.6
4.2
3.7
4.4
3.9
4.6
4.0
4.6
4.0
4.7
4.2
4.9
4.3
5.0
4.3
5.1
4.5
5.2
4.5
5.3
4.4
5.2
4.6
5.4
4.6
5.5
4.5
5.3
4.7
5.5
4.7
5.6
4.3
3.8
4.5
4.0
4.6
4.1
4.6
4.1
4.8
4.3
4.9
4.4
5.1
4.5
5.2
4.6
5.4
4.8
5.5
4.9
5.6
5.0
5.8
5.2
6.0
5.3
6.1
5.4
6.4
5.7
6.6
5.9
6.6
5.9
7.1
6.3
7.3
6.5
7.0
6.2
7.4
6.6
7.6
6.8
7.3
6.5
7.8
6.9
8.0
7.1
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 25
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 060 (ECM Blower)
1,950 CFM Nominal (Rated) Airflow Cooling, 2,050 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
7.5
7.5
11.3
11.3
15.0
15.0
PSI
FT
Airflow
CFM
7.2
7.2
1.3
1.3
3.5
3.5
6.1
6.1
0.9
0.9
2.9
2.9
5.3
5.3
0.6
0.6
2.5
2.5
4.7
4.7
0.5
0.5
2.2
2.2
4.3
4.3
0.5
0.5
2.1
2.1
4.1
4.1
0.5
0.5
2.0
2.0
4.0
4.0
0.5
0.5
2.0
2.0
4.0
4.0
0.5
0.5
2.0
2.0
3.9
3.9
0.5
0.5
1.9
1.9
3.9
3.9
0.4
0.4
1.8
1.8
3.8
3.8
0.1
0.1
1.6
1.6
3.7
3.7
16.6
16.6
3.0
3.0
8.1
8.1
14.1
14.1
2.0
2.0
6.7
6.7
12.2
12.2
1.4
1.4
5.7
5.7
10.9
10.9
1.1
1.1
5.1
5.1
10.0
10.0
1.1
1.1
4.8
4.8
9.5
9.5
1.1
1.1
4.6
4.6
9.2
9.2
1.1
1.1
4.6
4.6
9.1
9.1
1.2
1.2
4.5
4.5
9.1
9.1
1.1
1.1
4.5
4.5
9.0
9.0
0.8
0.8
4.2
4.2
8.8
8.8
0.3
0.3
3.8
3.8
8.5
8.5
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
68.4
74.0
66.0
71.4
64.2
69.5
69.5
75.1
68.9
74.5
68.2
73.7
68.6
74.1
69.4
75.0
69.5
75.1
66.3
71.7
68.1
73.6
68.8
74.3
63.2
68.3
65.5
70.9
66.6
72.0
59.5
64.4
62.2
67.2
63.5
68.6
57.6
62.3
60.3
65.1
61.6
66.6
55.7
60.2
58.3
63.1
59.7
64.5
51.9
56.1
54.4
58.8
55.7
60.2
48.6
52.5
50.7
54.8
51.8
56.1
46.1
49.8
47.6
51.4
48.5
52.4
43.6
51.3
41.7
49.0
40.4
47.6
44.8
52.8
44.0
51.8
43.4
51.0
45.0
52.9
45.0
52.9
44.8
52.7
44.3
52.2
44.9
52.8
45.0
53.0
43.2
50.8
44.1
51.9
44.4
52.3
41.8
49.1
42.8
50.4
43.3
51.0
41.0
48.2
42.0
49.5
42.6
50.1
40.2
47.3
41.3
48.6
41.8
49.2
38.7
45.5
39.7
46.7
40.2
47.3
37.6
44.2
38.3
45.0
38.7
45.5
37.2
43.7
37.3
43.9
37.6
44.2
0.64
0.69
0.63
0.69
0.63
0.69
0.65
0.70
0.64
0.70
0.64
0.69
0.66
0.71
0.65
0.71
0.64
0.70
0.67
0.73
0.66
0.72
0.65
0.71
0.68
0.74
0.67
0.73
0.67
0.73
0.70
0.76
0.69
0.75
0.68
0.74
0.71
0.77
0.70
0.76
0.69
0.75
0.72
0.79
0.71
0.77
0.70
0.76
0.75
0.81
0.73
0.79
0.72
0.79
0.77
0.84
0.76
0.82
0.75
0.81
0.81
0.88
0.78
0.85
0.77
0.84
2.41
2.53
2.26
2.38
2.20
2.31
2.63
2.77
2.46
2.59
2.39
2.51
2.89
3.04
2.69
2.83
2.61
2.74
3.18
3.34
2.96
3.11
2.85
3.00
3.52
3.70
3.26
3.43
3.15
3.31
3.90
4.10
3.62
3.81
3.49
3.67
4.1
4.33
3.83
4.03
3.69
3.88
4.34
4.56
4.03
4.24
3.88
4.08
4.85
5.10
4.51
4.74
4.34
4.56
5.45
5.73
5.05
5.31
4.86
5.11
6.15
6.47
5.69
5.98
5.48
5.76
78.5
82.6
75.5
79.5
73.5
77.4
80.3
84.6
79.2
83.4
78.2
82.3
80.3
84.5
80.5
84.7
80.2
84.4
78.9
83.1
80.0
84.2
80.3
84.6
76.9
80.9
78.4
82.6
79.1
83.3
74.4
78.3
76.2
80.2
77.1
81.1
73.2
77.1
74.9
78.9
75.8
79.8
72.0
75.8
73.7
77.5
74.5
78.5
69.9
73.5
71.2
75.0
72.0
75.8
68.5
72.1
69.3
72.9
69.8
73.5
68.3
71.9
68.2
71.8
68.4
72.0
28.4
29.2
29.2
30.0
29.2
30.1
26.4
27.1
28.0
28.8
28.6
29.4
23.7
24.4
25.8
26.5
26.7
27.4
20.9
21.5
23.0
23.7
24.1
24.8
18.0
18.5
20.1
20.7
21.2
21.8
15.3
15.7
17.2
17.6
18.2
18.7
14.1
14.4
15.8
16.3
16.8
17.3
12.8
13.2
14.5
14.9
15.4
15.8
10.7
11.0
12.1
12.4
12.8
13.2
8.9
9.2
10.0
10.3
10.7
11.0
7.5
7.7
8.4
8.6
8.8
9.1
1.9
2.0
1.7
1.8
1.7
1.8
2.2
2.3
1.9
2.0
1.8
1.9
2.8
2.9
2.3
2.4
2.2
2.3
3.4
3.6
2.9
3.1
2.7
2.8
4.3
4.5
3.6
3.8
3.3
3.5
5.3
5.6
4.6
4.8
4.2
4.4
5.9
6.2
5.1
5.4
4.7
5.0
6.5
6.8
5.7
6.0
5.2
5.5
7.9
8.3
6.9
7.3
6.5
6.8
9.4
9.9
8.4
8.8
7.9
8.3
11.3
11.9
10.1
10.6
9.5
10.0
Airflow
CFM
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
HC
kW
HE
LAT
COP
HWC
38.5
40.2
42.0
43.9
43.7
45.7
44.7
46.7
48.2
50.4
50.6
52.9
51.9
54.2
55.1
57.5
58.0
60.6
59.7
62.4
62.2
65.0
65.8
68.7
67.8
70.8
69.5
72.7
73.6
76.9
75.8
79.2
76.8
80.2
81.1
84.7
83.4
87.2
80.2
83.8
84.6
88.4
86.9
90.8
83.7
87.4
88.1
92.1
90.4
94.4
4.07
3.62
4.14
3.68
4.17
3.71
4.19
3.73
4.25
3.78
4.29
3.82
4.33
3.85
4.38
3.90
4.44
3.95
4.47
3.98
4.52
4.02
4.60
4.09
4.63
4.12
4.68
4.16
4.77
4.24
4.81
4.28
4.83
4.30
4.95
4.40
5.01
4.46
4.92
4.4
5.0
4.5
5.1
4.6
5.01
4.46
5.15
4.58
5.22
4.64
26.2
27.8
29.5
31.3
31.1
33.0
32.0
34.0
35.3
37.5
37.5
39.8
38.7
41.1
41.7
44.2
44.4
47.2
46.0
48.8
48.3
51.3
51.6
54.8
53.4
56.7
55.1
58.5
58.8
62.4
60.8
64.6
61.7
65.5
65.7
69.7
67.8
72.0
64.9
68.9
68.8
73.1
70.9
75.3
68.0
72.2
72.0
76.4
74.0
78.6
94.2
88.2
96.3
89.8
97.5
90.6
98.1
91.1
100.3
92.8
101.8
93.9
102.6
94.5
104.6
96.0
106.4
97.4
107.5
98.2
109.1
99.4
111.3
101.1
112.5
102.0
113.7
102.8
116.2
104.7
117.6
105.8
118.2
106.2
120.9
108.3
122.4
109.4
120.4
107.9
123.1
109.9
124.5
111.0
122.5
109.5
125.3
111.6
126.7
112.6
2.8
3.3
3.0
3.5
3.1
3.6
3.1
3.7
3.3
3.9
3.5
4.1
3.5
4.1
3.7
4.3
3.8
4.5
3.9
4.6
4.0
4.7
4.2
4.9
4.3
5.0
4.4
5.1
4.5
5.3
4.6
5.4
4.7
5.5
4.8
5.6
4.9
5.7
4.8
5.6
4.9
5.8
5.0
5.8
4.9
5.7
5.0
5.9
5.1
6.0
4.3
3.8
4.5
4.0
4.6
4.1
4.6
4.1
4.8
4.3
4.9
4.4
5.1
4.5
5.2
4.6
5.4
4.8
5.5
4.9
5.6
5.0
5.8
5.2
6.0
5.3
6.1
5.4
6.4
5.7
6.6
5.9
6.6
5.9
7.1
6.3
7.3
6.5
7.0
6.2
7.4
6.6
7.6
6.8
7.3
6.5
7.8
6.9
8.0
7.1
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 26
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 070 (PSC Blower)
2,100 CFM Nominal (Rated) Airflow Cooling, 2,100 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
PSI
FT
Airflow
CFM
9.5
9.5
2.7
2.7
5.2
5.2
8.1
8.1
2.1
2.1
4.4
4.4
7.1
7.1
1.7
1.7
3.8
3.8
6.4
6.4
1.6
1.6
3.5
3.5
5.9
5.9
1.5
1.5
3.3
3.3
5.7
5.7
1.5
1.5
3.2
3.2
5.5
5.5
1.5
1.5
3.2
3.2
5.5
5.5
1.6
1.6
3.2
3.2
5.5
5.5
1.6
1.6
3.2
3.2
5.4
5.4
1.4
1.4
3.1
3.1
5.3
5.3
1.2
1.2
2.9
2.9
5.2
5.2
22.0
22.0
6.3
6.3
12.0
12.0
18.8
18.8
4.9
4.9
10.1
10.1
16.4
16.4
4.0
4.0
8.8
8.8
14.8
14.8
3.6
3.6
8.1
8.1
13.7
13.7
3.5
3.5
7.6
7.6
13.1
13.1
3.5
3.5
7.5
7.5
12.8
12.8
3.6
3.6
7.5
7.5
12.7
12.7
3.6
3.6
7.4
7.4
12.6
12.6
3.6
3.6
7.4
7.4
12.5
12.5
3.3
3.3
7.1
7.1
12.3
12.3
2.7
2.7
6.6
6.6
11.9
11.9
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
76.3
82.5
74.8
80.9
73.7
79.6
76.8
83.0
76.6
82.8
76.2
82.4
75.6
81.7
76.6
82.8
76.8
83.0
73.3
79.2
75.0
81.1
75.7
81.9
70.1
75.8
72.4
78.3
73.4
79.4
66.4
71.7
69.0
74.6
70.2
75.9
64.3
69.5
67.0
72.4
68.3
73.8
62.3
67.3
65.0
70.3
66.4
71.7
58.1
62.8
60.8
65.7
62.2
67.2
54.1
58.5
56.6
61.2
57.9
62.6
50.4
54.5
52.6
56.8
53.8
58.1
43.4
51.0
41.4
48.7
40.2
47.3
45.0
52.9
44.0
51.8
43.3
50.9
45.4
53.4
45.2
53.2
44.9
52.8
45.0
52.9
45.4
53.4
45.4
53.4
43.9
51.7
44.7
52.6
45.0
52.9
42.5
50.0
43.5
51.2
43.9
51.7
41.7
49.0
42.7
50.3
43.2
50.8
40.9
48.1
41.9
49.4
42.5
50.0
39.3
46.2
40.3
47.4
40.8
48.0
37.8
44.5
38.7
45.5
39.2
46.1
36.8
43.3
37.4
44.0
37.7
44.4
0.57
0.62
0.55
0.60
0.55
0.59
0.59
0.64
0.57
0.62
0.57
0.62
0.60
0.65
0.59
0.64
0.59
0.64
0.61
0.67
0.60
0.66
0.60
0.65
0.63
0.68
0.62
0.67
0.61
0.67
0.64
0.70
0.63
0.69
0.63
0.68
0.65
0.71
0.64
0.69
0.63
0.69
0.66
0.71
0.65
0.70
0.64
0.70
0.68
0.74
0.66
0.72
0.66
0.71
0.70
0.76
0.68
0.74
0.68
0.74
0.73
0.79
0.71
0.77
0.70
0.76
3.27
3.44
3.10
3.26
3.02
3.18
3.56
3.74
3.36
3.53
3.26
3.43
3.87
4.07
3.64
3.83
3.54
3.72
4.22
4.44
3.97
4.17
3.85
4.05
4.63
4.87
4.35
4.57
4.20
4.42
5.09
5.35
4.77
5.02
4.62
4.86
5.3
5.62
5.01
5.27
4.85
5.11
5.60
5.89
5.25
5.52
5.09
5.35
6.18
6.50
5.80
6.10
5.62
5.91
6.85
7.20
6.43
6.76
6.22
6.54
7.60
7.99
7.13
7.50
6.90
7.26
89.5
94.2
87.4
92.0
86.0
90.5
90.9
95.7
90.1
94.9
89.4
94.1
90.8
95.6
91.0
95.8
90.9
95.7
89.7
94.4
90.6
95.3
90.9
95.7
87.8
92.4
89.1
93.8
89.7
94.5
85.5
90.0
87.1
91.7
87.8
92.5
84.3
88.7
85.9
90.4
86.7
91.2
83.1
87.4
84.7
89.1
85.5
90.0
80.8
85.0
82.2
86.5
83.0
87.4
78.9
83.0
80.0
84.2
80.6
84.9
77.7
81.8
78.3
82.4
78.7
82.9
23.3
24.0
24.1
24.8
24.4
25.0
21.6
22.2
22.8
23.5
23.4
24.0
19.5
20.1
21.0
21.6
21.7
22.3
17.4
17.8
18.9
19.5
19.7
20.2
15.1
15.6
16.7
17.1
17.5
18.0
13.0
13.4
14.4
14.9
15.2
15.6
12.1
12.4
13.4
13.8
14.1
14.5
11.1
11.4
12.4
12.7
13.0
13.4
9.4
9.7
10.5
10.8
11.1
11.4
7.9
8.1
8.8
9.0
9.3
9.6
6.6
6.8
7.4
7.6
7.8
8.0
3.5
3.7
3.5
3.7
3.5
3.7
3.7
3.9
3.5
3.7
3.5
3.7
4.3
4.5
3.9
4.1
3.7
3.9
5.2
5.5
4.6
4.8
4.3
4.5
6.4
6.7
5.5
5.8
5.1
5.4
7.9
8.3
6.8
7.2
6.4
6.7
8.8
9.3
7.6
8.1
7.1
7.5
9.7
10.2
8.5
8.9
7.9
8.3
11.8
12.4
10.4
10.9
9.7
10.2
14.2
14.9
12.6
13.3
11.9
12.5
16.9
17.8
15.2
16.0
14.3
15.1
Airflow
CFM
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
1500
2100
HC
kW
HE
LAT
COP
HWC
45.8
47.9
49.9
52.1
51.7
54.0
52.7
55.1
56.7
59.3
59.2
61.8
60.5
63.2
64.2
67.1
67.2
70.2
68.8
71.9
71.9
75.1
75.3
78.7
77.2
80.6
79.5
83.1
83.2
87.0
85.2
89.0
86.8
90.7
90.6
94.7
92.6
96.7
90.1
94.2
93.8
98.0
95.6
99.9
93.5
97.7
97.0
101.4
98.7
103.1
5.35
4.76
5.44
4.84
5.47
4.87
5.50
4.89
5.59
4.97
5.64
5.02
5.68
5.05
5.77
5.13
5.83
5.19
5.88
5.23
5.96
5.30
6.06
5.39
6.10
5.43
6.17
5.49
6.28
5.59
6.34
5.64
6.38
5.68
6.51
5.79
6.56
5.84
6.49
5.8
6.6
5.9
6.7
5.9
6.60
5.87
6.72
5.98
6.79
6.04
29.8
31.6
33.5
35.6
35.2
37.4
36.2
38.4
39.9
42.3
42.1
44.7
43.3
46.0
46.7
49.6
49.4
52.4
50.9
54.0
53.7
57.0
56.8
60.3
58.5
62.1
60.6
64.3
64.0
67.9
65.8
69.8
67.2
71.3
70.6
74.9
72.3
76.8
70.2
74.5
73.4
78.0
75.0
79.7
73.1
77.7
76.3
81.0
77.8
82.6
98.3
91.1
100.8
93.0
101.9
93.8
102.5
94.3
105.0
96.1
106.5
97.3
107.3
97.9
109.6
99.6
111.5
100.9
112.5
101.7
114.4
103.1
116.5
104.7
117.6
105.5
119.1
106.6
121.4
108.4
122.6
109.3
123.6
110.0
125.9
111.7
127.1
112.6
125.6
111.5
127.9
113.2
129.0
114.1
127.7
113.1
129.9
114.7
130.9
115.5
2.5
2.9
2.7
3.2
2.8
3.3
2.8
3.3
3.0
3.5
3.1
3.6
3.1
3.7
3.3
3.8
3.4
4.0
3.4
4.0
3.5
4.2
3.6
4.3
3.7
4.4
3.8
4.4
3.9
4.6
3.9
4.6
4.0
4.7
4.1
4.8
4.1
4.9
4.1
4.8
4.2
4.9
4.2
4.9
4.2
4.9
4.2
5.0
4.3
5.0
5.6
5.0
6.0
5.3
6.1
5.4
6.2
5.5
6.5
5.8
6.7
6.0
6.9
6.1
7.2
6.4
7.5
6.7
7.6
6.8
8.0
7.1
8.4
7.5
8.7
7.7
9.0
8.0
9.6
8.5
9.8
8.7
10.1
9.0
10.8
9.6
11.1
9.9
10.7
9.6
11.5
10.2
11.9
10.6
11.4
10.1
12.1
10.8
12.7
11.3
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 27
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Performance Data – TS H/V/D 070 (ECM Blower)
1,950 CFM Nominal (Rated) Airflow Cooling, 2,100 CFM Nominal (Rated) Airflow Heating
WPD
EWT
°F
20
30
40
50
60
70
80
85
90
100
110
120
GPM
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
9.0
9.0
13.5
13.5
18.0
18.0
PSI
FT
Airflow
CFM
9.5
9.5
2.7
2.7
5.2
5.2
8.1
8.1
2.1
2.1
4.4
4.4
7.1
7.1
1.7
1.7
3.8
3.8
6.4
6.4
1.6
1.6
3.5
3.5
5.9
5.9
1.5
1.5
3.3
3.3
5.7
5.7
1.5
1.5
3.2
3.2
5.5
5.5
1.5
1.5
3.2
3.2
5.5
5.5
1.6
1.6
3.2
3.2
5.5
5.5
1.6
1.6
3.2
3.2
5.4
5.4
1.4
1.4
3.1
3.1
5.3
5.3
1.2
1.2
2.9
2.9
5.2
5.2
22.0
22.0
6.3
6.3
12.0
12.0
18.8
18.8
4.9
4.9
10.1
10.1
16.4
16.4
4.0
4.0
8.8
8.8
14.8
14.8
3.6
3.6
8.1
8.1
13.7
13.7
3.5
3.5
7.6
7.6
13.1
13.1
3.5
3.5
7.5
7.5
12.8
12.8
3.6
3.6
7.5
7.5
12.7
12.7
3.6
3.6
7.4
7.4
12.6
12.6
3.6
3.6
7.4
7.4
12.5
12.5
3.3
3.3
7.1
7.1
12.3
12.3
2.7
2.7
6.6
6.6
11.9
11.9
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
1400
1950
TC
Cooling - EAT 80/67°F
Sens/
SC
Tot
kW
HR
Ratio
Performance capacities shown in thousands of Btuh
Heating - EAT 70°F
EER
HWC
Operation not recommended
77.0
83.2
75.9
82.1
75.0
81.1
77.1
83.4
77.2
83.5
77.0
83.2
75.8
82.0
76.9
83.1
77.1
83.4
73.5
79.5
75.2
81.3
75.9
82.1
70.5
76.2
72.6
78.5
73.6
79.6
66.9
72.3
69.3
74.9
70.5
76.2
64.9
70.1
67.4
72.9
68.7
74.2
62.9
68.0
65.5
70.8
66.8
72.2
58.8
63.6
61.4
66.4
62.8
67.8
54.8
59.2
57.3
61.9
58.6
63.3
51.0
55.2
53.3
57.6
54.5
58.9
44.8
52.7
43.6
51.3
42.8
50.3
45.6
53.6
45.2
53.1
44.8
52.7
45.4
53.5
45.6
53.7
45.6
53.6
44.6
52.5
45.2
53.2
45.5
53.5
43.4
51.0
44.3
52.1
44.7
52.5
41.8
49.2
42.9
50.4
43.4
51.0
41.0
48.2
42.1
49.5
42.6
50.1
40.2
47.3
41.3
48.5
41.8
49.2
38.5
45.3
39.6
46.5
40.1
47.2
37.0
43.6
37.9
44.6
38.4
45.2
35.9
42.2
36.5
43.0
36.9
43.4
0.58
0.63
0.57
0.63
0.57
0.62
0.59
0.64
0.59
0.64
0.58
0.63
0.60
0.65
0.59
0.65
0.59
0.64
0.61
0.66
0.60
0.65
0.60
0.65
0.62
0.67
0.61
0.66
0.61
0.66
0.63
0.68
0.62
0.67
0.62
0.67
0.63
0.69
0.62
0.68
0.62
0.68
0.64
0.69
0.63
0.69
0.63
0.68
0.65
0.71
0.64
0.70
0.64
0.70
0.68
0.74
0.66
0.72
0.66
0.71
0.70
0.76
0.69
0.75
0.68
0.74
2.86
3.01
2.67
2.81
2.58
2.71
3.16
3.32
2.95
3.10
2.85
3.00
3.47
3.65
3.25
3.42
3.15
3.31
3.82
4.02
3.58
3.76
3.46
3.64
4.21
4.43
3.94
4.14
3.81
4.01
4.66
4.90
4.36
4.58
4.21
4.43
4.9
5.17
4.59
4.83
4.44
4.67
5.17
5.44
4.83
5.08
4.67
4.91
5.76
6.06
5.37
5.65
5.19
5.46
6.44
6.77
6.01
6.32
5.80
6.10
7.24
7.61
6.74
7.09
6.50
6.84
88.8
93.5
87.1
91.6
85.8
90.4
90.0
94.7
89.3
94.0
88.8
93.4
89.7
94.5
90.0
94.8
89.9
94.7
88.6
93.2
89.5
94.2
89.8
94.5
86.7
91.3
88.0
92.7
88.6
93.3
84.5
89.0
86.0
90.6
86.8
91.3
83.4
87.8
84.9
89.4
85.6
90.1
82.2
86.6
83.7
88.2
84.5
89.0
80.1
84.3
81.4
85.7
82.1
86.5
78.2
82.4
79.3
83.5
79.9
84.1
77.1
81.1
77.7
81.8
78.1
82.2
26.9
27.7
28.4
29.2
29.1
29.9
24.4
25.1
26.2
26.9
27.0
27.7
21.8
22.5
23.6
24.3
24.5
25.2
19.2
19.8
21.0
21.6
21.9
22.6
16.7
17.2
18.5
19.0
19.3
19.9
14.3
14.8
15.9
16.4
16.7
17.2
13.3
13.6
14.7
15.2
15.5
16.0
12.2
12.5
13.6
13.9
14.3
14.7
10.2
10.5
11.4
11.8
12.1
12.4
8.5
8.8
9.5
9.8
10.1
10.4
7.1
7.3
7.9
8.1
8.4
8.6
3.5
3.7
3.5
3.7
3.5
3.7
3.7
3.9
3.5
3.7
3.5
3.7
4.3
4.5
3.9
4.1
3.7
3.9
5.2
5.5
4.6
4.8
4.3
4.5
6.4
6.7
5.5
5.8
5.1
5.4
7.9
8.3
6.8
7.2
6.4
6.7
8.8
9.3
7.6
8.1
7.1
7.5
9.7
10.2
8.5
8.9
7.9
8.3
11.8
12.4
10.4
10.9
9.7
10.2
14.2
14.9
12.6
13.3
11.9
12.5
16.9
17.8
15.2
16.0
14.3
15.1
Airflow
CFM
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
1475
2050
HC
kW
HE
LAT
COP
HWC
44.7
46.7
48.7
50.9
50.5
52.7
51.5
53.8
55.5
58.0
57.9
60.5
59.2
61.9
62.9
65.8
65.9
68.9
67.5
70.6
70.6
73.8
74.1
77.4
75.9
79.3
78.3
81.8
82.0
85.7
84.0
87.8
85.6
89.5
89.5
93.5
91.4
95.5
89.0
93.0
92.7
96.8
94.5
98.7
92.3
96.5
95.9
100.2
97.6
102.0
4.97
4.42
5.06
4.50
5.10
4.54
5.13
4.56
5.23
4.65
5.28
4.70
5.32
4.73
5.41
4.81
5.49
4.88
5.52
4.91
5.61
4.99
5.70
5.07
5.75
5.12
5.82
5.18
5.93
5.28
6.00
5.34
6.06
5.39
6.18
5.50
6.26
5.57
6.18
5.5
6.3
5.6
6.4
5.7
6.29
5.60
6.45
5.74
6.53
5.81
29.8
31.6
33.4
35.5
35.1
37.3
36.0
38.2
39.7
42.2
41.9
44.5
43.1
45.8
46.5
49.4
49.2
52.2
50.7
53.8
53.5
56.8
56.6
60.1
58.3
61.9
60.4
64.1
63.8
67.7
65.6
69.6
67.0
71.1
70.4
74.7
72.1
76.5
69.9
74.3
73.2
77.7
74.7
79.3
72.9
77.4
75.9
80.6
77.4
82.1
98.1
91.1
100.5
93.0
101.7
93.8
102.3
94.3
104.8
96.2
106.4
97.3
107.2
98.0
109.5
99.7
111.4
101.1
112.4
101.9
114.3
103.3
116.5
105.0
117.7
105.8
119.2
107.0
121.5
108.7
122.7
109.7
123.8
110.4
126.2
112.2
127.4
113.1
125.9
112.0
128.2
113.7
129.3
114.6
128.0
113.6
130.2
115.3
131.3
116.1
2.6
3.1
2.8
3.3
2.9
3.4
2.9
3.5
3.1
3.7
3.2
3.8
3.3
3.8
3.4
4.0
3.5
4.1
3.6
4.2
3.7
4.3
3.8
4.5
3.9
4.5
3.9
4.6
4.1
4.8
4.1
4.8
4.1
4.9
4.2
5.0
4.3
5.0
4.2
5.0
4.3
5.1
4.3
5.1
4.3
5.1
4.4
5.1
4.4
5.1
5.6
5.0
6.0
5.3
6.1
5.4
6.2
5.5
6.5
5.8
6.7
6.0
6.9
6.1
7.2
6.4
7.5
6.7
7.6
6.8
8.0
7.1
8.4
7.5
8.7
7.7
9.0
8.0
9.6
8.5
9.8
8.7
10.1
9.0
10.8
9.6
11.1
9.9
10.7
9.6
11.5
10.2
11.9
10.6
11.4
10.1
12.1
10.8
12.7
11.3
Operation not recommended
Interpolation is permissible; extrapolation is not.
All entering air conditions are 80°F DB and 67°F WB in cooling, and 70°F DB in heating.
AHRI/ISO certified conditions are 80.6°F DB and 66.2°F WB in cooling and 68°F DB in heating.
Table does not reflect fan or pump power corrections for AHRI/ISO conditions.
All performance is based upon the lower voltage of dual voltage rated units.
Performance stated is at the rated power supply; performance may vary as the power supply varies from the rated.
Operation below 40°F EWT is based upon a 15% methanol antifreeze solution.
Operation below 60°F EWT requires optional insulated water/refrigerant circuit.
See performance correction tables for operating conditions other than those listed above.
See Performance Data Selection Notes for operation in the shaded areas.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 28
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Air Flow Correction Table - Units with PSC Fan
TS006-018 with PSC Fan Motor
Airflow
Cooling
% of
Rated
Total
Capacity
Sensible
Capacity
S/T
75
0.9602
0.8350
81.25
0.9724
87.50
0.9831
93.75
100
Heating
Power
Heat of
Rejection
Heating
Capacity
Power
Heat of
Extraction
0.8696
0.9675
0.9617
0.9740
1.0936
0.9425
0.8733
0.8981
0.9744
0.9728
0.9810
1.0635
0.9592
0.9149
0.9306
0.9821
0.9829
0.9876
1.0379
0.9744
0.9923
0.9578
0.9653
0.9906
0.9920
0.9940
1.0167
0.9880
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
106.25
1.0062
1.0392
1.0328
1.0102
1.0070
1.0057
0.9878
1.0105
112.50
1.0109
1.0733
1.0617
1.0211
1.0130
1.0112
0.9800
1.0194
118.75
1.0141
1.1001
1.0848
1.0329
1.0180
1.0163
0.9705
1.0284
125
1.0159
1.1174
1.0999
1.0455
1.0220
1.0211
0.9614
1.0368
TS024-070 with PSC Fan Motor
Airflow
Cooling
Heating
% of
Rated
Total
Capacity
Sensible
Capacity
S/T
Power
Heat of
Rejection
Heating
Capacity
Power
Heat of
Extraction
72
0.925
0.850
0.919
0.951
0.950
0.957
1.124
0.942
80
0.954
0.903
0.946
0.966
0.968
0.973
1.072
0.963
88
0.974
0.941
0.966
0.977
0.982
0.984
1.037
0.979
0.994
96
0.992
0.981
0.989
0.992
0.995
0.995
1.010
100
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
104
1.007
1.018
1.011
1.009
1.005
1.005
0.993
1.006
112
1.017
1.052
1.035
1.027
1.013
1.012
0.986
1.015
120
1.023
1.082
1.058
1.047
1.019
1.019
0.990
1.022
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 29
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Air Flow Correction Table - Units with ECM Fan
TS018 with ECM Fan Motor
Airflow
Cooling
% of
Rated
Total
Capacity
Sensible
Capacity
S/T
75
0.9619
0.8593
81.25
0.9747
87.50
0.9853
93.75
100
Heating
Power
Heat of
Rejection
Heating
Capacity
Power
Heat of
Extraction
0.8933
0.9455
0.9587
0.9700
1.0822
0.9410
0.8943
0.9175
0.9564
0.9711
0.9775
1.0536
0.9579
0.9302
0.9441
0.9691
0.9821
0.9851
1.0304
0.9733
0.9938
0.9659
0.9719
0.9837
0.9918
0.9925
1.0125
0.9874
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
1.0000
106.25
1.0041
1.0313
1.0271
1.0181
1.0069
1.0074
0.9928
1.0112
112.50
1.0060
1.0584
1.0522
1.0381
1.0123
1.0148
0.9909
1.0210
118.75
1.0070
1.0815
1.0740
1.0598
1.0174
1.0222
0.9622
1.0377
125
1.0076
1.0998
1.0916
1.0834
1.0225
1.0295
0.8681
1.0712
TS024-070 with ECM Fan Motor
Airflow
Cooling
Heating
% of
Rated
Total
Capacity
Sensible
Capacity
S/T
Power
Heat of
Rejection
Heating
Capacity
Power
Heat of
Extraction
72
0.925
0.850
0.919
0.951
0.950
0.957
1.124
0.942
80
0.954
0.903
0.946
0.966
0.968
0.973
1.072
0.963
88
0.974
0.941
0.966
0.977
0.982
0.984
1.037
0.979
96
0.992
0.981
0.989
0.992
0.995
0.995
1.010
0.994
100
1.000
1.000
1.000
1.000
1.000
1.000
1.000
1.000
104
1.007
1.018
1.011
1.009
1.005
1.005
0.993
1.006
112
1.017
1.052
1.035
1.027
1.013
1.012
0.986
1.015
120
1.023
1.082
1.058
1.047
1.019
1.019
0.990
1.022
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 30
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Entering Air Correction Tables
Unit Sizes 006-018
Unit Sizes 024-070
Heating
Heating
Entering
Heat
Heating
Air DB
Power
of
Capacity
Extraction
°F
1.0514
0.7749
1.1240
45
Entering
Heat
Heating
Air DB
Power
of
Capacity
Extraction
°F
1.032
0.777
1.089
45
50
1.0426
0.8113
1.1032
50
1.029
0.817
1.077
55
1.0329
0.8525
1.0802
55
1.025
0.859
1.062
60
1.0224
0.8980
1.0551
60
1.018
0.903
1.044
65
1.0114
0.9473
1.0282
65
1.010
0.950
1.024
68
1.0046
0.9786
1.0115
70
1.000
1.000
1.000
1.0000
75
0.988
1.052
0.974
80
0.974
1.107
0.944
70
1.0000
1.0000
75
0.9883
1.0556
0.9706
80
0.9764
1.1135
0.9404
Unit Sizes 006-018
Cooling
Entering
Air
WB°F
Total
Capacity
Sensible Cooling Capacity Multiplier Entering DB °F
60
65
Power
70
75
80
80.6
85
90
95
Heat of
Rejection
50
0.7432
0.9111
*
*
*
*
*
*
*
*
0.9866
0.7901
55
0.8202
0.7709
0.8820
1.0192
*
*
*
*
*
*
0.9887
0.8527
60
0.8960
0.6702
0.8540
1.0473
*
*
*
*
*
0.9924
0.9146
65
0.9705
0.6491
0.8657
1.0809
1.1066
*
*
*
0.9975
0.9757
66.2
0.9882
0.5939
0.8152
1.0333
1.0592
1.2481
*
*
0.9990
0.9903
67
1.0000
0.5559
0.7801
1.0000
1.0261
1.2158
*
*
1.0000
1.0000
70
1.0438
0.6377
0.8645
0.8913
1.0847
1.2983
*
1.0042
1.0362
75
1.1159
0.6008
0.6289
0.8323
1.0578
1.2773
1.0123
1.0959
Power
Heat of
Rejection
Operation
not recommended
Unit Sizes 024-070
Cooling
Entering
Air
WB°F
Total
Capacity
Sensible Cooling Capacity Multiplier Entering DB °F
60
65
70
75
80
80.6
85
90
95
50
0.7491
0.7663
*
*
*
*
*
*
*
*
0.9894
0.8389
55
0.8265
0.5937
0.8724
1.0816
*
*
*
*
*
*
0.9927
0.8886
60
0.9040
0.6709
0.8826
1.1211
*
*
*
*
*
0.9959
0.9383
65
0.9814
0.6624
0.8850
1.0986
1.1140
*
*
*
0.9992
0.9881
66.2
1.0000
0.6065
0.8268
1.0394
1.0536
1.2294
*
*
1.0000
1.0000
67
1.0124
0.5685
0.7879
1.0000
1.0133
1.1891
1.3838
*
1.0005
1.0080
70
1.0589
0.6391
0.8521
0.8599
1.0361
1.2347
1.4461
1.0025
1.0378
75
1.1363
0.6056
0.5981
0.7783
0.9861
1.2256
1.0058
1.0875
Operation
not recommended
* = Sensible capacity equals total capacity
AHRI/ISO/ASHRAE 13256-1 uses entering air conditions of Cooling - 80.6°F DB/66.2°F WB, 1
and Heating - 68°F DB/59°F WB entering air temperature
For ClimaDry® equipped units the minimum entering air temperature when cooling is 65ºF DB / 55ºF WB. Operation below this minimum may result in nuisance faults.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 31
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Correction Tables - Antifreeze and Water Pressure Drop Adder for Options
Cooling
Heating
EWT 90°F
EWT 30°F
Antifreeze Type
Antifreeze
%
Total Cap
Sens Cap
Power
Htg Cap
Power
WPD
Corr. Fct.
EWT 30°F
Water
0
1.000
1.000
1.000
1.000
1.000
1.000
5
0.995
0.995
1.003
0.989
0.997
1.070
15
0.986
0.986
1.009
0.968
0.990
1.210
25
0.978
0.978
1.014
0.947
0.983
1.360
5
0.997
0.997
1.002
0.989
0.997
1.070
15
0.990
0.990
1.007
0.968
0.990
1.160
25
0.982
0.982
1.012
0.949
0.984
1.220
5
0.998
0.998
1.002
0.981
0.994
1.140
15
0.994
0.994
1.005
0.944
0.983
1.300
25
0.986
0.986
1.009
0.917
0.974
1.360
5
0.998
0.998
1.002
0.993
0.998
1.040
15
0.994
0.994
1.004
0.980
0.994
1.120
25
0.988
0.988
1.008
0.966
0.990
1.200
Propylene Glycol
Methanol
Ethanol
Ethylene Glycol
ClimaDry® II Option Corrections
(When Operating in Non-ClimaDry® Mode)
Motorized Water Valve Option Corrections
Model
Cv
4.9
006
009
012
018
024
030
036
042
048
060
070
MOPD
150
WPD Adders
GPM
PSI
FT
1.0
0.04
0.10
4.9
150
1.5
0.09
0.22
4.9
150
2.0
0.17
0.38
4.9
150
1.4
0.08
0.19
4.9
150
2.1
0.18
0.42
4.9
150
2.8
0.33
0.75
4.9
150
1.8
0.13
0.31
4.9
150
2.6
0.28
0.65
4.9
150
3.5
0.51
1.18
10.3
125
2.8
0.07
0.16
10.3
125
4.1
0.16
0.37
10.3
125
5.5
0.29
0.66
10.3
125
4.0
0.15
0.35
10.3
125
6.0
0.34
0.78
10.3
125
8.0
0.60
1.39
10.3
125
4.0
0.15
0.35
10.3
125
6.0
0.34
0.78
10.3
125
8.0
0.60
1.39
10.3
125
4.5
0.19
0.44
10.3
125
6.8
0.43
0.99
10.3
125
9.0
0.76
1.76
10.3
125
5.5
0.29
0.66
10.3
125
8.3
0.64
1.48
10.3
125
11.0
1.14
2.63
10.3
125
6.0
0.34
0.78
10.3
125
9.0
0.76
1.76
10.3
125
12.0
1.36
3.14
8.9
125
7.5
0.71
1.64
8.9
125
11.3
1.60
3.69
8.9
125
15.0
2.84
6.56
8.9
125
8.3
0.86
1.98
8.9
125
12.4
1.93
4.47
8.9
125
16.5
3.44
7.94
Model
018
024
030
036
042
048
060
070
GPM
2.8
4.1
4.0
6.0
4.0
6.0
4.5
6.8
5.5
8.3
6.0
9.0
7.5
11.3
8.3
WPD Adders
PSI
0.77
1.65
1.57
3.53
0.69
1.55
0.87
1.99
1.30
6.75
1.55
3.49
1.49
3.39
1.83
FT
1.77
3.80
3.62
8.14
1.59
3.58
2.02
4.60
3.01
15.58
3.58
8.06
3.45
7.82
4.22
12.4
4.08
9.42
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 32
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Blower Performance Data – Standard Unit - No Reheat (PSC Motor)
Airflow in CFM with wet coil and clean air filter
Model
Fan
Speed
Rated
Airflow
Min
CFM
HI
006
MED
240
150
LO
HI
009
MED
012
225
0.50
0.60
0.70
271
250
230
203
168
260
245
230
214
190
167
216
201
189
156
393
378
364
346
325
253
366
353
341
326
310
230
316
303
290
274
500
479
453
403
347
459
447
428
411
368
317
LO
371
368
358
345
315
HI
704
711
693
690
675
640
598
602
599
581
585
573
547
492
350
600
300
450
531
527
517
506
495
462
894
877
841
812
760
728
659
765
755
738
711
668
640
602
683
661
636
596
571
549
1111
1105
1066
1006
934
854
765
662
890
879
854
818
770
708
686
623
024
MED
450
HI
950
655
LO
759
745
730
704
662
627
1374
1351
1296
1228
1159
1090
1016
919
775
1146
1151
1128
1091
1047
997
934
844
705
1011
1015
999
945
911
863
785
656
1374
1351
1296
1228
1159
1090
1016
919
775
1146
1151
1128
1091
1047
997
934
844
705
1011
1015
999
945
911
863
785
HS MED
030
MED
950
655
HS LO
HI
1000
685
LO
HS HI
1342
1316
1249
1166
1083
1006
927
830
688
1298
1250
1183
1110
1039
969
894
796
652
HS LO
1213
1172
1112
1046
982
919
850
758
623
HI
1375
1387
1377
1350
1307
1251
1182
1099
1003
890
992
1013
1013
1002
986
967
941
900
832
719
887
900
897
886
872
853
826
785
HS MED
MED
1000
1200
685
825
LO
HS HI
1751
1717
1664
1592
1503
1399
1285
1163
1039
919
1538
1520
1485
1432
1361
1271
1165
1049
926
804
HS LO
1321
1294
1263
1226
1182
1130
1064
980
871
729
HI
1808
1759
1723
1680
1617
1524
1399
1247
1075
1001
HS MED
MED
1200
1537
1518
1494
1459
1408
1338
1247
1134
LO
1323
1309
1284
1246
1192
1122
1036
936
824
HS HI
1805
1791
1760
1720
1674
1620
1552
1457
1318
1116
1296
1297
1299
1299
1293
1276
1240
1176
1072
915
991
998
1013
1019
1004
963
894
804
705
042
HS
HS MED
048
MED
1400
825
1400
960
960
HS LO
HI
1.00
635
HS HI
024
HS
0.90
515
LO
600
0.80
312
HS HI
HS LO
042
0.40
285
326
HS MED
036
HS
0.30
305
520
MED
036
0.20
317
HI
018
HS
030
HS
0.10
LO
MED
018
300
Airflow (cfm) at External Static Pressure (in. wg)
0.00
1805
1791
1760
1720
1674
1620
1552
1457
1318
1116
1600
1100
1296
1297
1299
1299
1293
1276
1240
1176
1072
915
1871
1889
1873
1833
1777
1706
1617
1504
1353
1150
1600
1100
1663
1680
1686
1678
1650
1599
1520
1409
1262
1075
LO
048
HS
HS HI
HS MED
060
060
HS
HS LO
1479
1508
1521
1516
1492
1446
1376
1249
1148
981
HI
2311
2300
2279
2257
2209
2140
2088
1990
1901
1856
1752
2058
2039
2016
1983
1949
1920
1874
1807
1750
1670
1582
MED
1950
1500
LO
1868
1858
1858
1838
1806
1792
1749
1699
1636
1570
HS HI
2510
2486
2455
2424
2377
2318
2247
2161
2078
1986
1855
2171
2162
2162
2153
2117
2085
2024
1971
1891
1823
1691
HS MED
070
Operation not recommended
1950
1500
HS LO
2010
2006
2006
2006
1977
1947
1892
1851
1782
1705
1600
HI
2510
2486
2455
2424
2377
2318
2247
2161
2078
1986
1855
2171
2162
2162
2153
2117
2085
2024
1971
1891
1823
2010
2006
2006
2006
1977
1947
1892
1851
MED
LO
2100
1800
Black areas denote ESP where operation is not recommended.
Units factory shipped on medium speed. Other speeds require field selection.
All airflow is rated and shown above at the lower voltage if unit is dual voltage rated, e.g. 208V for 208-230V units.
Only two speed fan (H & M) available on 575V units.
Performance stated is at the rated power supply, performance may vary as the power supply varies from the rated.
HS = High static fan option
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 33
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Blower Performance Data – Units with ClimaDry® (PSC Motor)
Coil Face
Velocity
FPM
TSH/V/D with Reheat ESP Loss
TSH/V/D
018
In. of Water
TSH/V/D
024, 030
In. of Water
TSH/V/D
036
In. of Water
TSH/V/D
042, 048
In. of Water
TSH/V/D
060, 070
In. of Water
200
0.037
0.033
0.031
0.028
0.026
250
0.052
0.046
0.042
0.038
0.034
300
0.077
0.066
0.059
0.051
0.044
350
0.113
0.096
0.085
0.073
0.061
400
0.181
0.160
0.145
0.131
0.117
450
0.242
0.226
0.215
0.205
0.194
500
0.360
0.345
0.335
0.326
0.316
For TS units with ClimaDry® Reheat coil applications, calculate face velocity of the entering air. From the table above, find
ESP for Reheat application. The loss includes wet coil loss.
Example:
Reheat coil loss can be determined from the above table. Coil velocity (FPM) = Airflow (CFM) / Face Area (sq. ft.)
1.
2.
3.
4.
TSH036 has a face area of 4.86 sq. ft. (see physical data table).
At 1,100 cfm, coil velocity (FPM) = 1,100 / 4.86 = 226 FPM
From above table, it will be necessary to subtract 0.037 from the blower performance ESP.
On medium speed, the TSH036 (without reheat - see blower table) can deliver 1,100 CFM at 0.28 in. wg. with the
standard PSC motor; with the reheat coil, it now delivers 1,085 CFM at 0.28 in. wg. or 1,100 CFM at 0.24 in. wg.
5. If the decrease in airflow is acceptable, no changes are necessary. Otherwise, high speed fan should be used to
overcome the pressure drop of the reheat coil.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 34
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
ECM Control
The ECM fan is controlled by an interface board that converts thermostat inputs and field selectable CFM settings to signals used by
the ECM motor controller. Units manufactured after July 2005 have version II (P/N 17B0019N01). Fan speeds are selected with a nine
position DIP switch for version II. To take full advantage of the ECM motor features, a multi-stage thermostat should be used (2-stage
heat/2-stage cool or 3-stage heat/2-stage cool).
HFC-410A packaged units built after May 2009 have ECM controller version III (P/N 17B0034N01). This controller includes logic and
a relay to control the HWG functions.
Note: Power must be off to the unit for at least three seconds before the ECM motor will recognize a speed change. The motor
will recognize a change in the CFM Adjust or dehumidification mode settings while the unit is powered.
There are four different airflow settings from lowest airflow rate (speed tap 1) to the highest airflow rate (speed tap 4). The charts
below indicate settings for both versions of the ECM interface board, followed by detailed information for each setting.
WARNING! When the
disconnect switch is closed,
high voltage is present in some
areas of the electrical panel.
Exercise caution when working
with energized equipment.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 35
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
ECM Control
The ECM motor includes “soft start” and “ramp down” features. The soft start feature is a gentle increase of motor rpm at blower start
up. This creates a much quieter blower start cycle.
The ramp down feature allows the blower to slowly decrease rpm to a full stop at the end of each blower cycle. This creates a much
quieter end to each blower cycle and adds overall unit efficiency.
The ramp down feature may be eliminated during an ESD (Emergency Shut Down) situation when using a DXM unit controller. A DPDT
relay is required to break the line voltage to the ECM motor during ESD. This relay can be wired as shown below to eliminate the ramp
down (and operation) of the ECM blower motor.
To ‘ESD’ on DXM
To ‘R’ on DXM
ESD Signal
(field input)
Cooling Settings: The cooling setting determines the cooling (normal) CFM for all units with ECM motor. Cooling (normal) setting is
used when the unit is not in dehumidification mode. Tap 1 is the lowest CFM setting, while tap 4 is the highest CFM setting. To avoid
air coil freeze-up, tap 1 may not be used if the dehumidification mode is selected. Consult submittal data or specifications catalog for
the specific unit series and model to correlate speed tap setting to airflow in CFM.
Heating Settings: The heating setting determines the heating CFM for Tranquility® 30 (TT) and Tranquility® 20 (TS) units. Tap 1 is the
lowest CFM setting, while tap 4 is the highest CFM setting. Consult submittal data or specifications catalog for the specific unit series
and model to correlate speed tap setting to airflow in CFM.
Auxiliary/Emergency Heat Settings: The auxiliary/emergency heat setting determines the CFM when the unit is in auxiliary heat or
emergency heat mode. This setting is used for residential units with internal electric heat. When auxiliary electric heat is energized
(i.e. compressor and electric heat), the greater of the auxiliary/emergency or heating setting will be used. A “G” (fan) signal must be
present from the thermostat for electric heat to operate. Consult the submittal data or specifications catalog for the specific unit series
and model to correlate speed tap setting to airflow in CFM.
CFM Adjust Settings: The CFM adjust setting allows four selections. The NORM setting is the factory default position. The + or –
settings adjust the airflow by +/- 5%. The +/- settings are used to “fine tune” airflow adjustments. The TEST setting runs the ECM
motor at 400 cfm/ton, which causes the motor to operate like a standard PSC motor, and disables the CFM counter.
Dehumidification Mode Settings: The dehumidification mode setting provides field selection of humidity control. When operating in
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 36
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
ECM Control
the normal mode, the cooling airflow settings are determined by the cooling tap setting above. When dehumidification is enabled
there is a reduction in airflow in cooling to increase the moisture removal of the heat pump. Consult submittal data or specifications
catalog for the specific unit series and model to correlate speed tap to airflow in CFM. The dehumidification mode can be enabled in
two ways.
1.
2.
Constant Dehumidification Mode: When the dehumidification mode is selected (via DIP switch or jumper setting), the ECM motor
will operate with a multiplier applied to the cooling CFM settings (approx. 20-25% lower airflow). Any time the unit is running
in the cooling mode, it will operate at the lower airflow to improve latent capacity. The “DEHUM” LED will be illuminated at all
times. Heating airflow is not affected. NOTE: Do not select dehumidification mode if cooling setting is tap 1.
Automatic (Humidistat-controlled) Dehumidification Mode: When the dehumidification mode is selected (via DIP switch or
jumper setting) AND a humidistat is connected to terminal DH (version II) or HUM (version I), the cooling airflow will only be
reduced when the humidistat senses that additional dehumidification is required. The DH (or HUM) terminal is reverse logic.
Therefore, a humidistat (not dehumidistat) is required. The “DEHUM” LED will be illuminated only when the humidistat is calling
for dehumidification mode. Heating airflow is not affected. NOTE: Do not select dehumidification mode if cooling setting is
tap 1.
G
Y1
Y2
O
W
R
1/4" Spade
Connections
to CXM or
DXM Board
G
G
G
G
R
Thermostat
Input LEDs
C
TB1
CFM
CFM Counter
1 flash per 100 CFM
Y
ECM Motor
Low Voltage
Connector
J1
DEHUM
AL1
S1
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW8
SW9
OFF ON
G
A
Dehumidification
LED
Y2 Y1 G O W C R DH AL1 A
Thermostat
Connections
Fan Speed Selection DIP Switch
ECM Interface Board version II
(P/N 17B0019N01)
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 37
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Blower Performance Data – (ECM Motor) - Standard Unit - No Reheat
Residential
Units Only
Airflow in CFM with wet coil and clean air filter
Model
018
024
030
036
042
048
060
070
Max
ESP
(in. wg)
1.0
1.0
1.0
0.90
0.90
1.0
0.75
0.75
Fan
Motor
(hp)
1/2
1/2
1/2
1/2
1/2
1
1
1
Cooling Mode
Tap
Setting
Stg 1
4
3
Dehumid Mode
Heating Mode
Aux/
Emerg
Mode
Stg 2
Fan
Stg 1
Stg 2
Fan
Stg 1
Stg 2
Fan
AUX
CFM
640
800
400
500
620
400
640
800
400
4
800
600
750
375
470
590
375
600
750
375
3
750
2
525
650
330
400
500
330
525
650
330
2
650
1
450
550
280
450
550
280
1
650
4
900
1100
470
Operation not recommended
610
740
470
900
1100
470
4
1100
3
780
950
420
540
660
420
780
950
420
3
950
2
670
825
360
490
600
360
670
825
390
2
820
1
550
675
300
550
675
340
1
690
4
920
1130
560
720
880
560
1000
1230
560
4
1230
3
820
1000
500
640
780
500
900
1100
500
3
1100
2
740
900
450
580
700
450
800
950
450
2
950
1
660
800
400
640
780
400
1
780
4
1150
1400
700
900
1090
700
1150
1400
700
4
1400
3
1020
1250
630
800
980
630
1020
1250
630
3
1350
2
890
1080
540
690
840
540
890
1080
540
2
1350
1
740
900
450
750
920
450
1
1350
4
1290
1580
790
1010
1230
790
1290
1580
790
4
1580
3
1150
1400
700
900
1090
700
1150
1400
700
3
1400
2
1050
1280
640
820
1000
640
1020
1240
640
2
1350
1
920
1120
560
900
1080
560
1
1350
4
1420
1730
870
1110
1350
870
1520
1850
865
4
1850
3
1270
1550
780
990
1210
780
1350
1650
775
3
1650
2
1180
1440
720
920
1120
720
1110
1350
720
2
1350
1
1050
1280
640
980
1250
640
1
1200
4
1680
2050
1030
3
1500
1830
2
1400
1700
1
1300
1580
790
4
1830
2230
1100
1420
1740
3
1600
1950
980
1250
2
1440
1750
880
1120
1
1200
1580
790
1310
1600
1030
1870
2280
1030
4
2280
910
1170
1420
910
1680
2050
910
3
2050
850
1090
1330
850
1480
1800
850
2
1800
1270
1550
790
1
1550
1100
1830
2230
1100
4
2230
1520
980
1720
2100
980
3
2100
1360
880
1670
1950
880
2
1950
1460
1780
790
1
1780
See ECM control section for details on setting taps.
Bold numbers indicate factory settings.
During Auxiliary operation the CFM will run at the higher of the Heating (Delay
jumper) or AUX settings.
Airflow is controlled within 5% up to the Max ESP shown with wet coil.
Do not select Dehumidification mode if HP CFM is on setting 1.
All units AHRI/ISO/ASHRAE 13256-1 rated HP CFM Setting 3.
Tranquility® 20 (TS) Series with ClimaDry® Reheat Option (ECM Motor)
All Tranquility® 20 (TS) units with optional ECM fan motor automatically adjusts for the reheat coil.
The small additional pressure drop of the reheat coil causes the ECM motor to slightly increase RPM
to overcome the added pressure drop, and maintain selected CFM up to the maximum ESP.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 38
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
ClimaDry® II Option - Benefits and Application
ClimaDry® II Modulating Reheat Option
ClimateMaster’s patented ClimaDry® II Dehumidification
option is an innovative means of providing modulating
reheat without the complication of refrigeration controls.
ClimaDry® II is hot gas generated reheat, which utilizes
one of the biggest advantages of a Water-Source Heat
Pump (WSHP), the transfer of energy through the water
piping system. ClimaDry® II simply diverts condenser
water through a water-to-air coil that is placed after the
evaporator coil. If condenser water is not warm enough, the
internal “run-around” loop increases the water temperature
with each pass through the condenser coil (see figure 1,
below).
ClimaDry® II Benefits
ClimaDry® II is like no other reheat option on the market.
Proportional reheat is controlled to the desired leaving
air temperature setpoint (factory setpoint of 72°F, 22°C),
no matter what the water loop temperature is. Since
dehumidification operation will occur under less than full
load cooling conditions a good percentage of the time,
it is important to have a reheat function that provides
100% reheat in the spring and fall when the water loop is
cool. Supply air temperature is field adjustable to +/- 3°F
[+/- 1.7°C] for even greater flexibility with the optional
potentiometer. It is recommended that the ClimaDry®
supply air temperature be set to match the space cooling
setpoint so that ClimaDry® does not impact room
temperature. Competitors without ClimaDry® II typically
use an on/off (non-modulating) refrigeration based reheat
circuit, typically referred to as “Hot gas reheat” (HGR).
HGR needs higher condensing temperatures to work well,
typically 85°F [29°C] entering water temperature (EWT).
With HGR, cooler water temperatures produce cooler
supply air temperatures, which could overcool the space,
requiring additional space heating from another source or
a special auto-change-over relay to allow the unit to switch
back and forth between reheat and heating. Rarely does
HGR provide 100% reheat, like ClimaDry® II. ClimaDry® II
has a simple and easy to troubleshoot refrigerant circuit.
No switching valves or hard to diagnose leaky check valves
are utilized. No unusual refrigerant pressures occur during
the reheat mode. The ClimaDry® II refrigerant circuit
is like every other ClimateMaster unit (without reheat),
so everything the technician already knows applies to
troubleshooting the ClimaDry® II refrigeration circuit. Plus,
the water loop portion of the ClimaDry® II option is easy to
understand and diagnose.
ClimaDry® II Applications
ClimaDry® II can be applied to a number of common
applications, such as:
• Classrooms.
• Condominiums.
• Apartments.
• Computer rooms.
• Spaces with high latent loads like auditoriums, theaters,
convention centers, etc.
• Most applications where humidity is a problem.
(Note: ClimaDry® is not for use in high fraction
outdoor air applications or in applications with
corrosive atmospheres, such as pool rooms.)
Figure 1: ClimaDry® II Schematic
WATER OUT
(TO WATER LOOP)
MODULATING
MIXING
VALVE
REFRIGERANT IN
(COOLING)
WATER IN
(FROM WATER LOOP)
INTERNAL
PUMP
COAX
REFRIGERANT OUT
(COOLING)
1RWH
$OOFRPSRQHQWVVKRZQ
DUHLQWHUQDOWRWKHKHDW
SXPSXQLW
ENTERING
AIR
EVAPORATOR
COIL
LEAVING
AIR
REHEAT
COIL
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 39
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
ClimaDry® II Option - Benefits and Application
With the ClimaDry® II option, return air from the space is
cooled by the air-to-refrigerant (evaporator) coil, and then
reheated by the water-to-air (reheat) coil to dehumidify
the air, but maintain the same space temperature (thus
operating as a dehumidifier).
The moisture removal capability of the heat pump is
determined by the unit’s latent capacity rating. Latent
capacity equals Total capacity minus Sensible capacity.
Using unit performance data from submittals (http://www.
climatemaster.com/) select the correct model, use your
maximum entering water temperature (EWT) and flow
rate to select TC and SC. For example, at 80°F [26.7°C]
EWT and 6.8 GPM, the moisture removal capability (latent
capacity) of a ClimateMaster TS036 is 8.1 Mbtuh [2.4kW] as
shown below.
Most ClimateMaster heat pumps have a sensible-to-total
(S/T) ratio of 0.72 to 0.82. Therefore, approximately, 25% of
the cooling capacity is dedicated to latent cooling capacity
(moisture removal). When selecting a unit with ClimaDry® II,
the space sensible and latent loads should be calculated.
If the unit will be used for space cooling, a unit with at
least enough capacity to satisfy the building sensible load
should be selected. If the latent cooling load is not satisfied
by the selection, a larger unit with enough latent capacity
will be required. If the unit will be used for dehumidification
purposes only, the latent capacity is the only consideration
necessary. In this case, sensible load is immaterial.
Dividing the latent capacity by 1,069 BTU/LB of water vapor
at 80°F DB and 67°F WB [26.7°C DB and 19.4°C WB] moist
air enthalpy, converts the amount of moisture removal to
pounds per hour (multiply pounds per hour by 0.4536 to
obtain kg/hr). Calculations are shown below.
Example TS036 PSC Blower Performance
LC = TC - SC = 32.3 - 24.2 = 8.1 Mbtuh
8,100 Btuh ÷ 1069 = 7.6 lbs/hr
EWT
°F
70
80
85
90
WPD
Cooling - EAT 80/67°F
Heating - EAT 70°F
GPM
4.5
4.5
6.8
6.8
4.5
4.5
6.8
6.8
4.5
4.5
6.8
6.8
4.5
4.5
6.8
6.8
PSI
FT
Airflow CFM
TC
SC
Sens/Tot Ratio
kW
HR
EER
Airflow CFM
HC
kW
HE
LAT
COP
1.1
1.1
2.9
2.9
1.0
1.0
2.8
2.8
1.0
1.0
2.7
2.7
0.9
0.9
2.6
2.6
2.5
2.5
6.7
6.7
2.3
2.3
6.5
6.5
2.2
2.2
6.2
6.2
2.1
2.1
6.0
6.0
940
1250
940
1250
940
1250
940
1250
940
1250
940
1250
940
1250
940
1250
32.8
34.2
34.0
35.4
30.8
32.1
32.0
33.4
29.8
31.1
31.0
32.3
28.9
30.1
30.0
31.2
21.0
25.1
21.4
25.6
20.2
24.1
20.6
24.7
19.8
23.7
20.2
24.2
19.4
23.3
19.8
23.7
0.64
0.73
0.63
0.72
0.65
0.75
0.64
0.74
0.66
0.76
0.65
0.75
0.67
0.77
0.66
0.76
2.06
2.13
1.96
2.02
2.25
2.32
2.13
2.21
2.36
2.44
2.24
2.31
2.47
2.55
2.34
2.42
39.9
41.4
40.7
42.3
38.5
40.0
39.3
40.9
37.9
39.4
38.6
40.2
37.3
38.8
38.0
39.5
15.9
16.0
17.4
17.5
13.7
13.8
15.0
15.1
12.7
12.8
13.9
14.0
11.7
11.8
12.8
12.9
940
1250
940
1250
940
1250
940
1250
940
1250
940
1250
940
1250
940
1250
37.9
38.9
39.7
40.7
41.6
42.7
43.6
44.8
43.4
44.6
45.6
46.8
45.3
46.5
47.6
48.9
2.65
2.42
2.68
2.45
2.72
2.48
2.75
2.52
2.75
2.52
2.79
2.55
2.79
2.55
2.83
2.59
28.9
30.6
30.5
32.3
32.2
34.2
34.1
36.1
33.9
36.0
35.9
38.1
35.6
37.8
37.7
40.0
107
99
109
100
111
102
113
103
113
103
115
105
115
104
117
106
4.19
4.70
4.33
4.87
4.48
5.04
4.64
5.21
4.63
5.20
4.79
5.38
4.77
5.35
4.93
5.54
Dividing the latent capacity
by 1,069 BTU/LB of water
vapor at 80°F DB and 67°F
WB [26.7°C DB and 19.4°C
WB] moist air enthalpy,
converts the amount of
moisture removal to pounds
per hour (multiply pounds
per hour by 0.4536 to obtain
kg/hr).
Note: Minimum entering air temperature
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 40
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
ClimaDry® II Option - Sequence of Operation
ClimaDry® II Sequence of Operation - A heat pump
equipped with ClimaDry® II can operate in three modes;
cooling, cooling with reheat (dehumidification), and
heating. The cooling/heating modes are like any other
ClimateMaster WSHP. The reversing valve (“O” signal)
is energized in cooling, along with the compressor
contactor(s) and blower relay. In the heating mode the
reversing valve is de-energized. Almost any thermostat
will activate the heat pump in heating or cooling modes.
The DXM microprocessor board, which is required with
the ClimaDry® II option, will accept either heat pump
(Y,O) thermostats or non-heat pump (Y,W) thermostats.
The reheat mode requires either a separate humidistat/
dehumidistat or a thermostat that has an integrated
dehumidification function for activation. The DXM
board is configured to work with either a humidistat or
dehumidistat input to terminal “H”. Upon receiving an “H”
input, the DXM board will activate the cooling mode and
engage reheat. Table 4 shows the relationship between
thermostat input signals and unit operation.There are four
operational inputs for single stage units and six operational
inputs for dual stage units:
-Fan Only
-1st Stage Cooling
-2nd Stage Cooling
-1st Stage Heating
-2nd Stage Heating
-Reheat Mode
Fan Only: A (G) call from the thermostat to the (G)
terminal of the DXM control board will bring the unit on
in fan only mode.
1st Stage Cooling: A simultaneous call from (G), (Y1), and
(O) to the (G), (Y1), (O/W2) terminals of the DXM control
board will bring the unit on in 1st Stage Cooling.
2nd Stage Cooling: A simultaneous call from (G), (Y1),
(Y2), and (O) to the (G), (Y1), (Y2), and (O/W2) terminals
of the DXM control board will bring the unit on in
2nd Stage Cooling. When the call is satisfied at the
thermostat the unit will continue to run in 1st Stage
Cooling until the 1st Stage Cooling call is removed or
satisfied, shutting down the unit. NOTE: Not all units
have two-stage cooling functionality.
1st Stage Heating: A simultaneous call from (G) and (Y1) to
Table 2: Humidistat/Dehumidistat Logic and DXM (2.1, 2.2., 2.3) DIP Settings
Sensor
2.1
2.2
2.3
Logic
Reheat (ON) - H
Reheat (OFF) - H
Humidistat
OFF
OFF
OFF
Reverse
0 VAC
24 VAC
Dehumidistat
OFF
ON
OFF
Standard
24 VAC
0 VAC
Table 3: ClimaDry® II Operating Modes
Input
Mode
Output
O
G
Y1
Y23
H
O
G
Y1
Y23
Reheat
No Demand
ON/OFF
OFF
OFF
OFF
OFF
ON/OFF
OFF
OFF
OFF
OFF
Fan Only
ON/OFF
ON
OFF
OFF
OFF
ON/OFF
ON
OFF
OFF
OFF
Cooling 1st Stage
ON
ON
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
ON
ON
ON
OFF
ON
ON
ON
ON
OFF
Cooling & Dehumidistat
ON
ON
ON
ON/OFF
ON
ON
ON
ON
ON/OFF
OFF
Dehumidistat Only
ON/OFF
OFF
OFF
OFF
ON
ON
ON
ON
ON
ON
Heating 1st Stage
OFF
ON
ON
OFF
OFF
OFF
ON
ON
OFF
OFF
OFF
ON
ON
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
ON
ON/OFF
ON
OFF
ON
ON
ON/OFF
OFF
Cooling 2nd Stage
1
Heating 2nd Stage
2
Heating & Dehumidistat
1
Cooling input takes priority over dehumidify input.
DXM is programmed to ignore the H demand when the unit is in heating mode.
3
N/A for single stage units; Full load operation for dual capacity units.
4
ON/OFF = Either ON or OFF.
2
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 41
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
ClimaDry® II Option - Sequence of Operation
the (G) and (Y1) terminals of the DXM control board will
bring the unit on in 1st Stage Heating.
2nd Stage Heating: A simultaneous call from (G), (Y1),
and (Y2) to the (G), (Y1), and (Y2) terminals of the
DXM control board will bring the unit on in 2nd Stage
Heating. When the call is satisfied at the thermostat
the unit will continue to run in 1st Stage Heating until
the call is removed or satisfied, shutting down the
unit. NOTE: Not all units have two-stage heating
functionality (e.g. TLV084-150 units).
Reheat Mode: A call from the Humidistat/Dehumidistat to
the (H) terminal of the DXM control board will bring the
unit on in Reheat Mode if there is no call for cooling at
the thermostat. When the Humidistat/Dehumidification
call is removed or satisfied the unit will shut down.
NOTE: Cooling always overrides Reheat Mode. In the
Cooling mode, the unit cools and dehumidifies. If the
cooling thermostat is satisfied but there is still a call
for dehumidification, the unit will continue to operate
in Reheat Mode.
Note: Care must be taken when using a humidistat
to operate ClimaDry®. When the DIP switch on the
DXM controller is set for ‘humidistat’ it reverses
the control logic so that an “open” control circuit
initiates a ClimaDry® run cycle. If a humidistat is not
connected, or if a manual switch on the humidistat is
set to “off”, ClimaDry® will see the open circuit and
call for dehumidification.
ClimaDry® II Component Functions
The ClimaDry® II option consists of the following components:
Motorized Valve/Proportional Controller
Supply Air Sensor
Loop Pump
Hydronic Coil
Low Air Temperature Switch
The Loop Pump circulates condenser water through the
hydronic reheat coil during the reheat mode of operation.
In this application, the loop pump is only energized during
the reheat mode of operation. The Hydronic Coil is utilized
during the reheat mode of operation to reheat the air to
the setpoint of the proportional controller. Condenser
water is diverted by the motorized valve and pumped
through the hydronic coil by the loop pump in proportion
to the control setpoint. The amount of reheating is
dependent on the setpoint and how far from setpoint
the supply air temperature is. The factory setpoint is 72°F
[22°C], generally considered “neutral” air.
ClimaDry® II Application Considerations
The reheat coil adds a small amount of resistance to the
air stream. In some cases the high static option may be
required for applications with higher static ductwork.
Consult the submittal data or the Installation/Operation/
Maintenance (I.O.M.) manual for the specific heat pump to
review blower tables.
Unlike most hot gas reheat options, the ClimaDry® II
option will operate over a wide range of EWTs. Special
flow regulation (water regulating valve) is not required for
low EWT conditions.
Unit minimum entering air temperature while in the
dehumidification, cooling, or continuous fan modes is
65ºF DB/55ºF WB. Operation below this minimum may
result in nuisance faults.
Water-source heat pumps with ClimaDry® II should
not be used as make-up air units. These applications
should use equipment specifically designed for makeup air.
The Proportional Controller operates on 24 VAC power
supply and automatically adjusts the water valve based
upon the Supply Air Sensor. The Supply Air Sensor senses
supply air temperature at the blower inlet providing the
input signal necessary for the proportional control to drive
the motorized valve during the reheat mode of operation.
The Motorized Valve is a proportional actuator/three-way
valve combination used to divert the condenser water
from the coax to the hydronic reheat coil during the reheat
mode of operation. The proportional controller signals the
motorized valve based on the supply air temperature of
the supply air sensor.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 42
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Physical Data
Model
006
009
Compressor (1 Each)
012
018
024
030
036
Rotary
Factory Charge HFC-410A
(oz) [kg]
042
048
060
070
Scroll
24 [0.68]
32 [0.91]
34 [0.96]
50 [1.13]
41 [1.16]
41 [1.16]
48 [1.36]
68 [1.93]
68 [1.93]
136 [3.86]
141 [4.0]
N/A
N/A
N/A
9x7
[229 x 178]
9x7
[229 x 178]
9x7
[229 x 178]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
6X5
[152 X 127]
6X5
[152 X 127]
6X5
[152 X 127]
9x7
[229 x 178]
9x7
[229 x 178]
9x7
[229 x 178]
10 x 10
[254 x 254]
10 x 10
[254 x 254]
10 x 10
[254 x 254]
11 x 10
[279 x 254]
11 x 10
[279 x 254]
1/2”
1/2”
1/2”
3/4”
3/4”
3/4”
3/4”
1”
1”
1”
1”
N/A
N/A
N/A
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
1/2”
0.17 [0.64]
0.29 [1.10]
0.45 [1.70]
0.56 [2.12]
0.76 [2.88]
0.76 [2.88]
0.92 [3.48]
1.24 [4.69]
1.24 [4.69]
1.56 [5.91]
1.56 [5.91]
Air Coil Dimensions (h x w) (in) [mm]
16 x 16
[406 x 406]
Upflow Only
16 x 16
[406 x 406]
Upflow Only
16 x 16
[406 x 406]
Upflow Only
24 x 20
[610 x 508]
28 x 20
[711 x 508]
28 x 20
[711 x 508]
28 x 25
[711 x 635]
32 x 25
[813 x 635]
32 x 25
[813 x 635]
36 x 25
[914 x 635]
36 x 25
[914 x 635]
Standard Filter - 1” [25.4mm]
Throwaway, qty (in) [mm]
16 x 20
[406 x 508]
16 x 20
[406 x 508]
16 x 20
[406 x 508]
24 x 24
[610 x 610]
28 x 24
[711 x 610]
28 x 24
[711 x 610]
28 x 30
[711 x 762]
2 - 16 x 30
[2 - 406 x 762]
2 - 16 x 30
[2 - 406 x 762]
1 - 16 x 30;
1 - 20 x 30
[1 - 406 x 762;
1 - 508 x 762]
1 - 16 x 30;
1 - 20 x 30
[1 - 406 x 762;
1 - 508 x 762]
Weight - Operating, (lbs) [kg]
136 [62]
156 [71]
160 [73]
257 [117]
266 [121]
268 [122]
327 [148]
414 [188]
416 [189]
441 [200]
443 [201]
Weight - Packaged, (lbs) [kg]
146 [66]
166 [75]
170 [77]
267 [121]
276 [125]
278 [126]
337 [153]
424 [192]
426 [193]
451 [205]
453 [205]
Air Coil Dimensions (h x w) (in) [mm]
16 x 16
[406 x 406]
16 x 16
[406 x 406]
16 x 16
[406 x 406]
18 x 27
[457 x 686]
18 x 31
[457 x 787]
18 x 31
[457 x 787]
20 x 35
[508 x 889]
20 x 40
[508 x 1016]
20 x 40
[508 x 1016]
20 x 45
[508 x 1143]
20 x 45
[508 x 1143]
Standard Filter - 1” [25.4mm]
Throwaway, qty (in) [mm]
16 x 20
[406 x 508]
16 x 20
[406 x 508]
16 x 20
[406 x 508]
2 - 18 x 18
[2 - 457 x 457]
2 - 18 x 18
[2 - 457 x 457]
2 - 18 x 18
[2 - 457 x 457]
1 - 12 x 20;
1- 20 x 25
[1 - 305 x 508;
1 - 508 x 635]
1 - 18 x 20;
1 - 20 x 24
[1 - 457 x 508;
1 - 508 x 610]
1 - 18 x 20;
1 - 20 x 24
[1 - 457 x 508;
1 - 508 x 610]
2 - 20 x 24
[2 - 508 x 610]
2 - 20 x 24
[2 - 508 x 610]
Weight - Operating, (lbs) [kg]
136 [62]
156 [71]
160 [73]
257 [117]
266 [121]
268 [122]
327 [148]
414 [188]
416 [189]
441 [200]
443 [201]
Weight - Packaged, (lbs) [kg]
146 [66]
166 [75]
170 [77]
267 [121]
276 [125]
278 [126]
337 [153]
424 [192]
426 [193]
451 [205]
453 [205]
ECM Fan Motor & Blower
Blower Wheel Size (dia x w) (in) [mm]
PSC Fan Motor & Blower (3 Speeds)
Blower Wheel Size (dia x w) (in) [mm]
Water Connection Size
FPT (in)
HWG Connection Size
FPT (in)
Coax Volume
Volume (US Gallons) [liters]
Vertical Upflow/Downflow
Horizontal
Notes:
All units have TXV expansion device and 1/2” & 3/4” electrical knockouts.
575 volt motors are two speed.
For units with ClimaDry® II option add 66lbs (30kg) to weights.
Unit Maximum Water Working Pressure
Options
Max Pressure PSIG [kPa]
Base Unit
Internal Secondary Pump (ISP)
ClimaDry
®
500 [3,447]
145 [999]
145 [999]
Internal Motorized Water Valve (MWV)
300 [2,068]
Internal Auto Flow Valve
300 [2,068]
Use the lowest maximum pressure rating when multiple options are combined.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 43
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
TS - Horizontal – Dimensional Data
Horizontal
Model
Overall Cabinet
*A
Width
B
Length
C
Height
006 012
in
cm
22.4
56.8
43.1
107.8
17.3
43.1
018
in
cm
22.4
56.8
62.2
158.0
19.3
48.9
024 030
in
cm
22.4
56.8
62.2
158.0
19.3
48.9
036
in
cm
25.4
64.5
71.2
180.8
21.3
54.0
042 048
in
cm
25.4
64.5
76.2
193.5
21.3
54.0
060 070
in
cm
25.4
64.5
81.2
206.2
21.3
54.0
*Does not include air filter supports. Add 2” (5.1cm) when a 1” (25.4mm) filter is used, add 3”
(7.6cm) when a 2” (50.8mm) filter is used.
Water Connections Units with ClimaDry®
Water Connections
Horizontal
Model
1
2
3
4
5
Loop
In
D
Loop
Out
E
HWG
In
F
HWG
Out
G
H
Water
Loop
FPT
HWG
FPT
1
2
Loop
In D
Loop
Out E
006 012
in
cm
3.7
9.3
9.7
24.2
N/A
N/A
0.8
2.0
1/2”
N/A
N/A
N/A
018
in
cm
2.1
5.2
10.0
25.4
13.9
35.2
16.9
42.9
0.6
1.5
3/4”
1/2”
2.1
5.2
10.0
25.4
024 030
in
cm
2.1
5.2
10.0
25.4
13.9
35.2
16.9
42.9
0.6
1.5
3/4”
1/2”
5.96
15.14
13.13
33.35
036
in
cm
3.4
8.6
10.8
27.5
15.6
39.7
18.9
47.9
0.6
1.5
3/4”
1/2”
5.96
15.14
13.13
33.35
042 048
in
cm
3.4
8.6
10.8
27.5
15.6
39.7
18.9
47.9
0.6
1.5
1”
1/2”
5.96
15.14
13.13
33.35
060 070
in
cm
3.4
8.6
10.8
27.5
15.6
39.7
18.9
47.9
0.6
1.5
1”
1/2”
5.96
15.14
13.13
33.35
Electrical Knockouts
Horizontal
Model
J
1/2”
K
1/2”
L
3/4”
Low
Voltage
External
Pump
Power
Supply
006 012
in
cm
3.8
9.4
6.3
15.6
8.8
21.9
018
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
024 030
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
036
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
042 048
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
060 070
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
Notes:
1. While clear access to all removable panels is not required, installer
should take care to comply with all building codes and allow adequate
clearance for future field service.
2. Horizontal units shipped with filter bracket only. This bracket should
be removed for return duct connection
3. Discharge flange and hanger brackets are factory installed.
4. Condensate is 3/4” NPT.
5. CCP and BSP requires 2’ service access.
6. Blower service access is through back panel on straight discharge
units or through panel opposite air coil on back discharge units.
Legend:
CCP = Control/Compressor Access Panel
BSP = Blower Service Panel
*ASP = Additional Service Panel (not required)
Note:
*ASP are removable panels that provide additional access to the units
interior. Clear access to ASP panels is not required and they are not to
be used in place of the mandatory CCP and BSP panels.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 44
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
TS - Horizontal – Dimensional Data
Discharge Connection
Duct Flange Installed
Horizontal
Model
M
N
O
P
Supply Supply
Height Width
Return Connection
Using Return Air Opening
Return Connection
Using Optional Air Filter Frame
Q
R
S
Return
Width
T
Return
Height
U
V
S
Return
Width
T
Return
Height
U
V
006 - 012
in
cm
5.3
13.4
4.1
10.3
9.0
22.5
9.0
22.5
5.3
13.4
4.1
10.3
17.1
43.4
15.3
38.9
2.1
5.3
1.0
2.5
17.7
45.0
14.2
36.1
2.3
5.8
1.7
4.3
018
in
cm
3.6
9.3
2.0
5.1
15.5
39.4
12.5
31.8
3.6
9.2
2.0
5.2
28.1
71.4
17.3
43.9
6.2
15.7
1.0
2.5
33.8
85.8
16.2
41.0
2.3
5.8
1.7
4.3
024 - 030
in
cm
3.6
9.3
2.0
5.1
15.5
39.4
12.5
31.8
3.6
9.2
2.0
5.2
32.1
81.5
17.3
43.9
2.3
5.8
1.0
2.5
33.8
85.8
16.2
41.0
2.3
5.8
1.7
4.3
036
in
cm
*3.1
7.9
1.2
3.1
19.0
48.3
17.5
44.5
*3.1
7.9
1.0
2.6
36.1
91.7
19.3
49.0
2.3
5.7
1.0
2.5
34.8
88.3
18.2
46.1
3.1
7.8
1.7
4.3
042 - 048
in
cm
3.1
7.9
1.2
3.1
19.0
48.3
17.5
44.5
3.1
7.9
1.0
2.6
41.1
104.4
19.3
49.0
2.3
5.7
1.0
2.5
39.8
101.0
18.2
46.1
3.1
7.8
1.7
4.3
060 - 070
in
cm
3.1
7.9
1.2
3.1
19.0
48.3
17.5
44.5
3.1
7.9
1.0
2.6
46.1
117.1
19.3
49.0
2.3
57
1.0
2.5
44.8
113.7
18.2
46.1
3.1
7.8
1.7
4.3
*For units with modulating reheat option this dimension is 2.9” (7.4 cm).
All dimensions +/- 0.20 in. (5.1 mm).
LEFT RETURN
CCP
ASP*
Front
Power Supply
3 / 4” [19.1mm] Knockout
Left Return
ASP*
Straight
Discharge
5
1.6 [40.6mm]
1.6 [40.6mm]
1 / 2” [12.7mm]
Knockout
3.25
[82.6mm]
4
Low Voltage
3
1 / 2” [12.7mm]
L
Knockout
CCP
K
J
2
H
CCP
ASP*
Front
Right Return
ASP*
3.25
[82.6mm]
G
F
1
D
H
E
Straight
Discharge
5
A
Front-View
Condensate
Back
Discharge 3 / 4” NPT
Note: Choose either
back or straight discharge
RIGHT RETURN
Note:
*ASP are removable panels that provide additional access to the units interior.
Clear access to ASP panels is not required and they are not to be used in place
of the mandatory CCP and BSP panels.
Condensate
3 / 4” NPT
Back
Discharge
BSP
O
Blower
Outlet
Y
C
006-012
018-030
036
042-048
060-070
X
in.
43.1
62.1
71.1
76.1
81.1
Y
cm.
109.5
157.7
180.6
193.3
206.0
in.
24.5
24.5
27.5
27.5
27.5
P
R
Blower
Outlet
O
Z
cm.
62.2
62.2
69.9
69.9
69.9
in.
20.3
20.3
23.3
23.3
23.3
cm.
51.5
51.5
59.1
59.1
59.1
Z
C
Air Coil Side
P
Front
Q
Air Coil Side
Unit Hanger Detail
Model
Note: Choose either
back or straight discharge
BSP
Q
R
A
A
X
Right Return Back Discharge
Left Return Back Discharge
P
M
Blower
Outlet
O
N
CCP
ASP*
BSP
P
BSP
Blower
Outlet
CCP
ASP*
O
N
Front
Front
Right Return Straight Discharge
M
Left Return Straight Discharge
1.1 [27.9mm]
V
U
S
Air Coil
S
Air Coil
ASP*
C T
C
Front
ASP*
V
U
T
Front
B
Left Return Left View Air Coil Opening
B
Right Return Right View Air Coil Opening
Filter Rails Removed
See Aff ---- for accessory air filter frame with duct collar
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 45
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
TS - Horizontal Service Access
Right Return Back Discharge
Left Return Back Discharge
Supply
Air Flow
Supply
Air Flow
Air Coil
Return
Air Flow
BSP
Air Coil
BSP
Front
Front
ASP
ASP
ASP
ASP
CCP
CCP
Left Return Straight Discharge
Right Return Straight Discharge
BSP
Supply
Air Flow
Air Coil
Air Coil
BSP
Return
Air Flow
Return
Air Flow
Supply
Air Flow
Front
Return
Air Flow
Front
ASP
ASP
ASP
ASP
CCP
CCP
Notes:
1. While clear access to all removable panels is not required,
installer should take care to comply with all building codes
and allow adequate clearance for future field service.
2. CCP and BSP requires 2’ service access.
3. Blower service access is through back panel on straight
discharge units or through panel opposite air coil on back
discharge units.
4. ASP are removable panels that provide additional access to
the units interior. Clear access to ASP panels is not required
and they are not to be used in place of the mandatory CCP
and BSP panels.
= mandatory 2Ⱦ service access
= (optional) additional 2Ⱦ service access
Legend:
CCP = Control/Compressor Access Panel
BSP = Blower Service Panel
ASP = Additional Service Panel (not required)
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 46
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
TS - Vertical Upflow – Dimensional Data
Overall Cabinet
Vertical
Upflow
Model
*A
Width
B
Depth
C
Height
Water Connections
Vertical
Upflow
Model
1
2
3
4
5
Loop
In
D
Loop
Out
E
HWG
In
F
HWG
Out
G
H
Water
Loop
FPT
HWG
FPT
006 012
in
cm
22.4
56.8
21.6
54.9
34.5
87.6
018
in
cm
22.4
56.8
25.6
65.1
44.6
113.3
006 012
in
cm
3.7
9.4
9.7
24.6
N/A
N/A
7.4
18.7
1/2”
N/A
024 030
in
cm
22.4
56.8
25.6
65.1
48.5
123.2
018
in
cm
2.1
5.2
10.0
25.4
13.9
35.2
16.9
42.9
7.8
19.8
3/4”
1/2”
036
in
cm
25.4
64.5
30.6
77.8
50.5
128.3
024 030
in
cm
2.1
5.2
10.0
25.4
13.9
35.2
16.9
42.9
7.8
19.8
3/4”
1/2”
042 048
in
cm
25.4
64.5
30.6
77.8
54.5
138.4
036
in
cm
3.4
8.6
10.8
27.5
15.6
39.7
18.9
47.9
7.8
19.8
3/4”
1/2”
060 070
in
cm
25.4
64.5
30.6
77.8
58.5
148.6
042 048
in
cm
3.4
8.6
10.8
27.5
15.6
39.7
18.9
47.9
7.8
19.8
1”
1/2”
060 070
in
cm
3.4
8.6
10.8
27.5
15.6
39.7
18.9
47.9
7.8
19.8
1”
1/2”
*Does not include air filter supports. Add 2” (5.1cm)
when a 1” (25.4mm) filter is used, add 3” (7.6cm) when
a 2” (50.8mm) filter is used.
Electrical Knockouts
Vertical
Upflow
Model
J
1/2”
K
1/2”
L
3/4”
Low
Voltage
External
Pump
Power
Supply
006 012
in
cm
3.8
9.5
6.3
15.9
8.8
22.2
018
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
024 030
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
036
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
042 048
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
060 070
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
Notes:
1. While clear access to all removable panels is not required,
installer should take care to comply with all building codes
and allow adequate clearance for future field service.
2. Front & Side access is preferred for service access. However,
all components may be serviced from the front access panel
if side access is not available.
3. Discharge flange is field installed.
4. Condensate is 3/4” NPT.
Legend:
CCP = Control/Compressor Access Panel
BSP = Blower Service Panel
ASP = Additional Service Panel (not required)
‡
Recommended Minimum Installation Clearances for Vertical Units*
1”
†
Back of unit
1”
Side opposite return air
Front if hard piped
1”
Return Air Side
Ducted return
1”
Air Coil Side
6”
1”
- ‡ Add for duct width
- † Add 2” for 1” filter frame/rail or 3” for 2” filter frame/rail
Front
Free (open) return - calculate required dimension for a maximum
velocity of 600 fpm
6”
*Field installed accessories (hoses, air cleaners, etc.) may require additional space.
Top supply air is shown, the same clearances apply to bottom supply air units.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 47
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
TS - Vertical Upflow – Dimensional Data
Discharge Connection
Duct Flange Installed
Vertical
Upflow
Model
Return Connection
Using Return Air Opening
Return Connection Using
Optional Air Filter Frame
M
N
O
Supply
Width
P
Supply
Depth
Q
R
S
Return
Depth
T
Return
Height
U
R
S
Return
Depth
T
Return
Height
U
006 012
in
cm
6.7
17.0
6.3
16.0
9.0
22.9
9.0
22.9
6.7
17.0
2.3
5.8
17.1
43.3
15.3
38.9
1.0
2.5
1.7
4.3
17.7
45.0
14.2
36.1
1.7
4.3
018
in
cm
7.2
18.3
5.8
14.8
14.0
35.6
14.0
35.6
4.9
12.4
2.3
5.8
21.1
53.6
23.7
60.2
1.0
2.5
1.7
4.3
22.2
56.4
22.2
66.5
1.7
4.3
024 030
in
cm
7.2
18.3
5.8
14.8
14.0
35.6
14.0
35.6
4.9
12.4
2.3
5.8
21.1
53.6
27.7
70.4
1.0
2.5
1.7
4.3
22.2
56.4
26.2
66.5
1.7
4.3
036
in
cm
6.4
16.1
6.3
16.0
18.0
45.7
18.0
45.7
5.3
13.5
2.3
5.8
26.1
66.3
27.7
70.4
1.0
2.5
1.7
4.3
27.2
69.1
26.2
66.5
1.7
4.3
042 048
in
cm
6.4
16.1
6.3
16.0
18.0
45.7
18.0
45.7
5.3
13.5
2.3
5.8
26.1
66.3
30.5
77.5
1.0
2.5
1.7
4.3
27.2
69.1
30.2
76.7
1.7
4.3
060 070
in
cm
6.4
16.1
6.3
16.0
18.0
45.7
18.0
45.7
5.3
13.5
2.3
5.8
26.1
66.3
35.7
90.7
1.0
2.5
1.7
4.3
27.2
69.1
34.2
86.9
1.7
4.3
All dimensions +/- .20 in, (+/- 5.1mm).
Field Installed
Discharge Flange
Filter Rails
Air Coil
N
N
P
BSP
Front
O
B
Front
P
ASP*
O
A
ASP*
Q
Air Coil Side
Air Coil Side
Top View-Right Return
Top View-Left Return
S
R
R
U
CCP
M
S
Isometric (Left Return)
View
1.00 [25.4 mm]
U
Air Coil
Air Coil
T
T
1.68 [42.7 mm]
C
C
1.18 [30.0 mm]
ASP*
Condensate
3/4" FPT
Power Supply
3 / 4" [19.1mm]
HV Knockout
1 / 2" [12.7mm]
Knockout
Low Voltage
1 / 2" [12.7mm]
LV Knockout
ASP*
1.63
[41.4 mm]
Back
Right Return Right View
- Air Coil Opening
Back
Front
Left Return Left View
- Air Coil Opening
4
3
2
ASP*
Front
CCP
H
J K
L
F
5
1
D
H
G
E
Front-View
Note:
*ASP are removable panels that provide additional access to the
units interior. Clear access to ASP panels is not required and they
are not to be used in place of the mandatory CCP and BSP panels.
Filter Rails Removed
See Aff ---- for accessory air filter frame with duct collar
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 48
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
TS - Vertical Service Access
Vertical Units
Left Return
Air Coil
Supply Air
Opening
Front
ASP
ASP
CCP and BSP
Right Return
Air Coil
Supply Air
Opening
Front
ASP
ASP
CCP and BSP
Notes:
1. While clear access to all removable panels is not required,
installer should take care to comply with all building codes
and allow adequate clearance for future field service.
2. Front & Side access is preferred for service access. However,
all components may be serviced from the front access panel
if side access is not available.
3. ASP are removable panels that provide additional access to
the units interior. Clear access to ASP panels is not required
and they are not to be used in place of the mandatory CCP
and BSP panels.
4. Top supply air is shown, the same clearances apply to
bottom supply air units.
= mandatory 2Ⱦ service access
= (optional) additional 2Ⱦ service access
Legend:
CCP = Control/Compressor Access Panel
BSP = Blower Service Panel
ASP = Additional Service Panel (not required)
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 49
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
TS - Vertical Downflow – Dimensional Data
Vertical
Downflow
Model
Electrical Knockouts
Overall Cabinet
*A
Width
B
Depth
C
Height
Vertical
Downflow
Model
J
1/2”
K
1/2”
L
3/4”
Low
Voltage
External
Pump
Power
Supply
018
in
cm
22.4
56.8
25.6
65.1
48.4
122.9
024 030
in
cm
22.4
56.8
25.6
65.1
52.5
133.4
018
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
036
in
cm
25.4
64.5
30.6
77.8
54.5
138.4
024 030
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
042 048
in
cm
25.4
64.5
30.6
77.8
58.5
148.6
036
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
060 070
in
cm
25.4
64.5
30.6
77.8
62.5
158.8
042 048
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
060 070
in
cm
3.6
9.2
6.1
15.6
8.6
21.9
*Does not include air filter supports. Add 2” (5.1cm) when a 1” (25.4mm) filter is used,
add 3” (7.6cm) when a 2” (50.8mm) filter is used.
Water Connections
Vertical
Downflow
Model
1
2
3
4
5
Loop
In
D
Loop
Out
E
HWG
In
F
HWG
Out
G
H
Water
Loop
FPT
HWG
FPT
018
in
cm
17.2
43.7
9.3
23.6
5.4
13.7
2.4
6.1
3.6
9.2
3/4”
1/2”
024 030
in
cm
17.9
45.5
10.5
26.7
5.7
14.5
2.4
6.1
3.6
9.2
3/4”
1/2”
036
in
cm
17.9
45.5
10.5
26.7
5.7
14.5
2.4
6.1
3.6
9.2
3/4”
1/2”
042 048
in
cm
17.9
45.5
10.5
26.7
5.7
14.5
2.4
6.1
3.6
9.2
1”
1/2”
060 070
in
cm
17.9
45.5
10.5
26.7
5.7
14.5
2.4
6.1
3.6
9.2
1”
1/2”
Recommended Minimum Installation Clearances for Vertical Units*
‡
1”
†
Back of unit
1”
Side opposite return air
Front if hard piped
1”
Return Air Side
Air Coil Side
6”
1”
Ducted return
1”
- ‡ Add for duct width
Front
- † Add 2” for 1” filter frame/rail or 3” for 2” filter frame/rail
Free (open) return - calculate required dimension for a maximum
velocity of 600 fpm
6”
*Field installed accessories (hoses, air cleaners, etc.) may require additional space.
Top supply air is shown, the same clearances apply to bottom supply air units.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 50
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
TS - Vertical Downflow – Dimensional Data
Discharge Connection
Duct Flange Installed
Vertical
Downflow
Model
Return Connection
Using Return Air Opening
Return Connection
Using Optional Air Filter Frame
M
N
O
Supply
Width
P
Supply
Depth
Q
R
S
Return
Depth
T
Return
Height
U
R
S
Return
Depth
T
Return
Height
U
018
in
cm
6.7
17.1
8.4
21.4
10.1
25.7
9.1
23.0
10.8
27.4
2.2
5.6
21.1
53.6
23.7
60.2
21.2
53.8
1.7
4.3
22.2
56.4
22.2
56.4
21.9
55.6
024 030
in
cm
6.7
17.1
8.4
21.4
10.1
25.7
9.1
23.0
10.8
27.4
2.2
5.6
21.1
53.6
27.7
70.4
21.2
53.8
1.7
4.3
22.2
56.4
26.2
66.5
21.9
55.6
036
in
cm
7.2
18.3
9.0
22.9
13.4
34.0
12.9
32.7
10.4
26.5
2.2
5.6
26.1
66.3
27.7
70.4
23.2
58.9
1.7
4.3
27.2
69.1
26.2
66.5
23.9
60.7
042 048
in
cm
7.2
18.3
9.0
22.9
13.4
34.0
12.9
32.7
10.4
26.5
2.2
5.6
26.1
66.3
30.5
77.5
23.2
58.9
1.7
4.3
27.2
69.1
30.2
76.7
23.9
60.7
060 070
in
cm
7.2
18.3
9.0
22.9
13.4
34.0
12.9
32.7
10.4
26.5
2.2
5.6
26.1
66.3
35.7
90.7
23.2
58.9
1.7
4.3
27.2
69.1
34.2
86.9
23.9
60.7
All dimensions +/- .20 in, (+/- 5.1mm).
Legend:
CCP = Control/Compressor Access Panel
BSP = Blower Service Panel
ASP = Additional Service Panel (not required)
P
Filter Rail
ASP*
N
N
ASP*
CCP
ASP*
P
O
Blower
Opening
O
A
Front
A
Blower
Opening
BSP
Front
Condensate 3/4”
Q
FPT
M
Air Coil Side
Air Coil Side
B
B
Left Return Discharge
Floor Foot Print
Right Return Discharge
Floor Foot Print
1.1 [27.9mm]
ASP*
U
ASP*
U
Isometric View
(Right Return)
Power Supply
3 / 4” [19.1mm]
HV Knockout
1.6 [40.6mm]
1 / 2” [12.7mm]
Knockout
L
Low Voltage
1 / 2” [12.7mm]
LV Knockout
K
1.6 [40.6mm]
4
J
CCP
3
2
G
F
E
D
1
Air Coil
T
Air Coil
C
BSP
Condensate
3 / 4” FPT Right Return
T
Condensate
3 / 4” FPT Left Return
Front
Back Back
S
R
Right Return Right View
- Air Coil Opening
Front
R
Filter Rails Removed
See Aff ---- for accessory air filter frame
with duct collar
5
Front-View
S
Left Return Left View
- Air Coil Opening
5
H
Notes:
1. While clear access to all removable panels is not required,
installer should take care to comply with all building codes and
allow adequate clearance for future field service.
2. Front & Side access is preferred for service access. However,
all components may be serviced from the front access panel
if side access is not available.
3. Condensate is 3/4” FPT PVC.
4. ASP are removable panels that provide additional access to the
units interior. Clear access to ASP panels is not required and they
are not to be used in place of the mandatory CCP and BSP panels.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 51
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Corner Weights for TSH Series Units
Model
006
009
012
018
024
030
036
042
048
060
070
Lbs
Total
Left-Front*
Right-Front*
Left-Back*
Right-Back*
136
45.0
30.0
33.0
28.0
kg
62
20.4
13.6
15.0
12.7
Lbs
156
55.0
33.0
36.0
32.0
kg
71
24.9
15.0
16.3
14.5
Lbs
160
56.0
34.0
37.0
33.0
kg
73
25.4
15.4
16.8
15.0
Lbs
257
78.1
64.6
66.2
47.5
kg
117
35.4
29.3
30.0
21.6
Lbs
266
78.8
67.2
69.9
50.2
kg
122
35.7
30.5
31.7
22.7
Lbs
268
79.4
67.7
70.4
50.5
kg
122
36.0
30.7
31.9
22.9
Lbs
327
104.4
74.9
83.7
64.0
kg
148
47.4
34.0
38.0
29.0
Lbs
414
144.3
92.1
97.7
79.9
kg
188
65.4
41.8
44.3
36.2
Lbs
416
145.0
92.6
98.1
80.3
kg
189
65.8
42.0
44.5
36.4
Lbs
441
182.3
72.5
78.4
107.8
kg
200
82.7
32.9
35.6
48.9
Lbs
443
183.1
72.8
78.8
108.3
kg
201
83.1
33.0
35.7
49.1
*Front is control box end.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 52
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Electrical Data – PSC Motor & ClimaDry®
All TS Units with Standard PSC Motor
Model
018
024
030
036
042
048
060
070
Compressor
Voltage
Code
Rated
Voltage
Voltage
Min/Max
G
208/230/60/1
197/254
1
E
265/60/1
239/292
1
G
208/230/60/1
197/254
1
TS Units with PSC Fan Motor
and ClimaDry®
TS Units (PSC)
LRA
Fan
Motor
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
Reheat
Pump
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
9.0
48.0
1.0
10.0
12.3
20
0.8
10.8
13.1
20
8.4
40.0
0.9
9.3
11.4
15
0.7
10.0
12.1
20
13.5
58.3
1.6
15.1
18.5
30
0.8
15.9
19.3
30
QTY RLA
E
265/60/1
239/292
1
9
54.0
1.1
10.1
12.4
20
0.7
10.8
13.1
20
H
208/230/60/3
197/254
1
7.1
55.4
1.6
8.7
10.5
15
0.8
9.5
11.3
15
F*
460/60/3*
414/506
1
3.5
28.0
0.9
4.4
5.3
15
0.7
5.1
6.0
15
G
208/230/60/1
197/254
1
12.8
64.0
1.8
14.6
17.8
30
0.8
15.4
18.6
30
E
265/60/1
239/292
1
10.9
60.0
1.4
12.3
15.0
25
0.7
13.0
15.7
25
H
208/230/60/3
197/254
1
8.3
58.0
1.8
10.1
12.2
20
0.8
10.9
13.0
20
F*
460/60/3*
414/506
1
5.1
28.0
1.0
6.1
7.4
15
0.7
6.8
8.1
15
G
208/230/60/1
197/254
1
16.0
77.0
1.8
17.8
21.8
35
0.8
18.6
22.6
35
E
265/60/1
239/292
1
12.2
72.0
2.0
14.2
17.3
25
0.7
14.9
18.0
30
H
208/230/60/3
197/254
1
10
71.0
1.8
11.8
14.3
20
0.8
12.6
15.1
25
F*
460/60/3*
414/506
1
4.7
38.0
1.0
5.7
6.9
15
0.7
6.4
7.6
15
G
208/230/60/1
197/254
1
16.7
79.0
2.2
18.9
23.1
35
0.8
19.7
23.9
40
E
265/60/1
239/292
1
13.5
72.0
1.7
15.2
18.6
30
0.7
15.9
19.3
30
H
208/230/60/3
197/254
1
10.4
73.0
2.2
12.6
15.2
25
0.8
13.4
16.0
25
F*
460/60/3*
414/506
1
5.8
38.0
1.0
6.8
8.3
15
0.7
7.5
9.0
15
N
575/60/3
518/633
1
3.8
36.5
0.8
4.6
5.6
15
N/A
N/A
N/A
N/A
G
208/230/60/1
197/254
1
21.8
117.0
2.7
24.5
30.0
50
1.1
25.6
31.0
50
E
265/60/1
239/292
1
16.3
98.0
2.9
19.2
23.3
35
1.3
20.5
24.6
40
30
H
208/230/60/3
197/254
1
13.7
83.1
2.7
16.4
19.8
30
1.1
17.5
20.9
F*
460/60/3*
414/506
1
6.2
41.0
1.7
7.9
9.5
15
1.3
9.0
10.6
15
N
575/60/3
518/633
1
4.8
33.0
1.4
6.2
7.4
15
N/A
N/A
N/A
N/A
G
208/230/60/1
197/254
1
26.4
134.0
3.8
30.2
36.8
60
1.1
31.3
37.9
60
H
208/230/60/3
197/254
1
16
110.0
3.8
19.8
23.8
35
1.1
20.9
24.9
40
F*
460/60/3*
414/506
1
7.8
52.0
1.3
9.1
11.1
15
1.3
10.4
12.4
20
N
575/60/3
518/633
1
5.7
38.9
2.2
7.9
9.3
15
N/A
N/A
N/A
N/A
G
208/230/60/1
197/254
1
30.8
178.0
4.0
34.8
42.5
70
1.1
35.9
43.6
70
H
208/230/60/3
197/254
1
19.6
138.0
4.0
23.6
28.5
45
1.1
24.7
29.6
45
F*
460/60/3*
414/506
1
8.2
66.1
2.6
10.8
12.9
20
1.3
12.1
14.2
20
N
575/60/3
518/633
1
6.6
55.3
1.5
8.1
9.8
15
N/A
N/A
N/A
N/A
* NEUTRAL CONNECTION REQUIRED! All F Voltage (460 vac) units with ClimaDry® require a four wire power supply with neutral.
Reheat pump is rated 265 vac and is wired between one hot leg and neutral.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 53
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Electrical Data – High Static PSC Motor & ClimaDry®
All TS Units with High Static PSC Fan Motor
Model
018
024
030
036
042
048
060
TS (H.S. PSC) Units
TS Units with H.S. PSC Fan Motor
and ClimaDry®
LRA
Fan
Motor
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
Reheat
Pump
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
9.0
48.0
1.1
10.1
12.4
20
0.8
10.9
13.2
20
8.4
40.0
0.9
9.3
11.4
15
0.7
10.0
12.1
20
13.5
58.3
1.8
15.3
18.7
30
0.8
16.1
19.5
30
Compressor
Voltage
Code
Rated
Voltage
Voltage
Min/Max
QTY
RLA
G
208/230/60/1
197/254
1
E
265/60/1
239/292
1
G
208/230/60/1
197/254
1
E
265/60/1
239/292
1
9
54.0
1.4
10.4
12.7
20
0.7
11.1
13.4
20
H
208/230/60/3
197/254
1
7.1
55.4
1.8
8.9
10.7
15
0.8
9.7
11.5
15
F*
460/60/3*
414/506
1
3.5
28.0
1
4.5
5.4
15
0.7
5.2
6.1
15
G
208/230/60/1
197/254
1
12.8
64.0
2.2
15.0
18.2
30
0.8
15.8
19.0
30
E
265/60/1
239/292
1
10.9
60.0
1.7
12.6
15.3
25
0.7
13.3
16.0
25
H
208/230/60/3
197/254
1
8.3
58.0
2.2
10.5
12.6
20
0.8
11.3
13.4
20
F*
460/60/3*
414/506
1
5.1
28.0
1.0
6.1
7.4
15
0.7
6.8
8.1
15
G
208/230/60/1
197/254
1
16.0
77.0
2.2
18.2
22.2
35
0.8
19.0
23.0
35
E
265/60/1
239/292
1
12.2
72.0
1.7
13.9
17.0
25
0.7
14.6
17.7
25
25
H
208/230/60/3
197/254
1
10
71.0
2.2
12.2
14.7
25
0.8
13.0
15.5
F*
460/60/3*
414/506
1
4.7
38.0
1.0
5.7
6.9
15
0.7
6.4
7.6
15
G
208/230/60/1
197/254
1
16.7
79.0
2.7
19.4
23.6
35
0.8
20.2
24.4
40
E
265/60/1
239/292
1
13.5
72.0
2.9
16.4
19.8
30
0.7
17.1
20.5
30
H
208/230/60/3
197/254
1
10.4
73.0
2.7
13.1
15.7
25
0.8
13.9
16.5
25
F*
460/60/3*
414/506
1
5.8
38.0
1.7
7.5
9.0
15
0.7
8.2
9.7
15
N
575/60/3
518/633
1
3.8
36.5
1.4
5.2
6.2
15
N/A
N/A
N/A
N/A
G
208/230/60/1
197/254
1
21.8
117.0
2.6
24.4
29.9
50
1.1
25.5
31.0
50
H
208/230/60/3
197/254
1
13.7
83.1
2.6
16.3
19.7
30
1.1
17.4
20.8
30
F*
460/60/3*
414/506
1
6.2
41.0
1.8
8.0
9.6
15
1.3
9.3
10.9
15
N
575/60/3
518/633
1
4.8
33.0
1.4
6.2
7.4
15
N/A
N/A
N/A
N/A
G
208/230/60/1
197/254
1
26.4
134.0
4.0
30.4
37.0
60
1.1
31.5
38.1
60
40
H
208/230/60/3
197/254
1
16
110.0
4.0
20.0
24.0
35
1.1
21.1
25.1
F*
460/60/3*
414/506
1
7.8
52.0
2.6
10.4
12.4
15
1.3
11.7
13.7
20
N
575/60/3
518/633
1
5.7
38.9
1.5
7.2
8.6
15
N/A
N/A
N/A
N/A
* NEUTRAL CONNECTION REQUIRED! All F Voltage (460 vac) units with ClimaDry® require a four wire power supply with neutral.
Reheat pump is rated 265 vac and is wired between one hot leg and neutral.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 54
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Electrical Data – ECM Motor & ClimaDry®
All TS Units with ECM Fan Motor
Model
018
024
030
036
042
048
060
070
TS Units with ECM Fan Motor
and ClimaDry®
TS Units (ECM)
LRA
Fan
Motor
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
Reheat
Pump
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
9.0
48.0
3.9
12.9
15.2
20
0.8
13.7
16.0
20
8.4
40.0
3.2
11.6
13.7
20
0.7
12.3
14.4
20
13.5
58.3
3.9
17.4
20.8
30
0.8
18.2
21.6
35
Compressor
Voltage
Code
Rated
Voltage
Voltage
Min/Max
QTY
RLA
G
208/230/60/1
197/254
1
E
265/60/1
239/292
1
G
208/230/60/1
197/254
1
E
265/60/1
239/292
1
9
54.0
3.2
12.2
14.5
20
0.7
12.9
15.2
20
H
208/230/60/3
197/254
1
7.1
55.4
3.9
11.0
12.8
15
0.8
11.8
13.6
20
F*
460/60/3*
414/506
1
3.5
28.0
3.2
6.7
7.6
15
0.7
7.4
8.3
15
G
208/230/60/1
197/254
1
12.8
64.0
3.9
16.7
19.9
30
0.8
17.5
20.7
30
E
265/60/1
239/292
1
10.9
60.0
3.2
14.1
16.8
25
0.7
14.8
17.5
25
H
208/230/60/3
197/254
1
8.3
58.0
3.9
12.2
14.3
20
0.8
13.0
15.1
20
F*
460/60/3*
414/506
1
5.1
28.0
3.2
8.3
9.6
15
0.7
9.0
10.3
15
G
208/230/60/1
197/254
1
16.0
77.0
3.9
19.9
23.9
35
0.8
20.7
24.7
40
E
265/60/1
239/292
1
12.2
72.0
3.2
15.4
18.5
30
0.7
16.1
19.2
30
H
208/230/60/3
197/254
1
10
71.0
3.9
13.9
16.4
25
0.8
14.7
17.2
25
F*
460/60/3*
414/506
1
4.7
38.0
3.2
7.9
9.1
15
0.7
8.6
9.8
15
G
208/230/60/1
197/254
1
16.7
79.
3.9
20.6
24.8
40
0.8
21.4
25.6
40
E
265/60/1
239/292
1
13.5
72.0
3.2
16.7
20.1
30
0.7
17.4
20.8
30
H
208/230/60/3
197/254
1
10.4
73.0
3.9
14.3
16.9
25
0.8
15.1
17.7
25
F*
460/60/3*
414/506
1
5.8
38.0
3.2
9.0
10.5
15
0.7
9.7
11.2
15
G
208/230/60/1
197/254
1
21.8
117.0
6.9
28.7
34.2
50
1.1
29.8
35.3
50
E
265/60/1
239/292
1
16.3
98.0
6.0
22.3
26.4
40
1.3
23.6
27.7
40
H
208/230/60/3
197/254
1
13.7
83.1
6.9
20.6
24.0
35
1.1
21.7
25.1
35
F*
460/60/3*
414/506
1
6.2
41.0
6.0
12.2
13.8
20
1.3
13.5
15.1
20
G
208/230/60/1
197/254
1
26.4
134.0
6.9
33.3
39.9
60
1.1
34.4
41.0
60
E
265/60/1
239/292
1
19.9
130.0
6.0
25.9
30.9
50
1.3
27.2
32.2
50
H
208/230/60/3
197/254
1
16
110.0
6.9
22.9
26.9
40
1.1
24.0
28.0
40
F*
460/60/3*
414/506
1
7.8
52.0
6.0
13.8
15.8
20
1.3
15.1
17.1
20
G
208/230/60/1
197/254
1
30.8
178.0
6.9
37.7
45.4
70
1.1
37.9
45.6
70
H
208/230/60/3
197/254
1
19.6
138.0
6.9
26.5
31.4
50
1.1
27.6
32.5
50
F*
460/60/3*
414/506
1
8.2
66.1
6.0
14.2
16.3
20
1.3
15.5
17.6
25
®
* NEUTRAL CONNECTION REQUIRED! All F Voltage (460 vac) units with ECM motors/ClimaDry require a four wire power supply with neutral.
ECM motors/reheat pumps are rated 265 vac and are wired between one hot leg and neutral.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 55
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Electrical Data – PSC Motor & Secondary Pump
All TS Units with Standard PSC Motor
Model
006
009
012
018
024
030
036
042
048
060
070
Voltage
Code
Rated
Voltage
Voltage
Min/
Max
QTY
RLA
G
208/230/60/1
197/254
1
3.1
TS Units with PSC Fan Motor
and Secondary Pump
TS Units (PSC)
LRA
Fan
Motor
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
Pump
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
17.7
0.4
3.5
4.3
15
0.4
3.9
4.7
15
Compressor
E
265/60/1
239/292
1
2.6
13.5
0.4
3.0
3.6
15
0.7
3.7
4.3
15
G
208/230/60/1
197/254
1
3.9
21.0
0.4
4.3
5.3
15
0.4
4.7
5.7
15
E
265/60/1
239/292
1
3.7
22.0
0.4
4.1
5.0
15
0.7
4.8
5.7
15
G
208/230/60/1
197/254
1
5.0
25.0
0.7
5.7
7.0
15
0.4
6.1
7.4
15
E
265/60/1
239/292
1
4.5
22.0
0.7
5.2
6.4
15
0.7
5.9
7.0
15
G
208/230/60/1
197/254
1
9.0
48.0
1.0
10.0
12.3
20
0.4
10.4
12.7
20
E
265/60/1
239/292
1
8.4
40.0
0.9
9.3
11.4
15
0.7
10.0
12.1
20
G
208/230/60/1
197/254
1
13.5
58.3
1.6
15.1
18.5
30
0.4
15.5
18.9
30
E
265/60/1
239/292
1
9
54.0
1.1
10.1
12.4
20
0.7
10.8
13.1
20
H
208/230/60/3
197/254
1
7.1
55.4
1.6
8.7
10.5
15
0.4
9.13
10.9
15
F*
460/60/3*
414/506
1
3.5
28.0
0.9
4.4
5.3
15
0.7
5.1
6.0
15
G
208/230/60/1
197/254
1
12.8
64.0
1.8
14.6
17.8
30
0.8
15.4
18.6
30
E
265/60/1
239/292
1
10.9
60.0
1.4
12.3
15.0
25
0.7
13.0
15.7
25
H
208/230/60/3
197/254
1
8.3
58.0
1.8
10.1
12.2
20
0.8
10.9
13.0
20
F*
460/60/3*
414/506
1
5.1
28.0
1.0
6.1
7.4
15
0.7
6.8
8.1
15
G
208/230/60/1
197/254
1
16.0
77.0
1.8
17.8
21.8
35
0.8
18.6
22.6
35
E
265/60/1
239/292
1
12.2
72.0
2.0
14.2
17.3
25
0.7
14.9
18.0
30
H
208/230/60/3
197/254
1
10
71.0
1.8
11.8
14.3
20
0.8
12.6
15.1
25
F*
460/60/3*
414/506
1
4.7
38.0
1.0
5.7
6.9
15
0.7
6.4
7.6
15
G
208/230/60/1
197/254
1
16.7
79.0
2.2
18.9
23.1
35
0.8
19.7
23.9
40
E
265/60/1
239/292
1
13.5
72.0
1.7
15.2
18.6
30
0.7
15.9
19.3
30
H
208/230/60/3
197/254
1
10.4
73.0
2.2
12.6
15.2
25
0.8
13.4
16.0
25
F*
460/60/3*
414/506
1
5.8
38.0
1.0
6.8
8.3
15
0.7
7.5
9.0
15
N
575/60/3
518/633
1
3.8
36.5
0.8
4.6
5.6
15
N/A
N/A
N/A
N/A
G
208/230/60/1
197/254
1
21.8
117.0
2.7
24.5
30.0
50
0.8
25.3
30.8
50
E
265/60/1
239/292
1
16.3
98.0
2.9
19.2
23.3
35
0.7
19.9
24.0
40
H
208/230/60/3
197/254
1
13.7
83.1
2.7
16.4
19.8
30
0.8
17.2
20.6
30
F*
460/60/3*
414/506
1
6.2
41.0
1.7
7.9
9.5
15
0.7
8.6
10.2
15
N
575/60/3
518/633
1
4.8
33.0
1.4
6.2
7.4
15
N/A
N/A
N/A
N/A
G
208/230/60/1
197/254
1
26.4
134.0
3.8
30.2
36.8
60
1.1
31.3
37.9
60
40
H
208/230/60/3
197/254
1
16
110.0
3.8
19.8
23.8
35
1.1
20.9
24.9
F*
460/60/3*
414/506
1
7.8
52.0
1.3
9.1
11.1
15
1.3
10.4
12.4
20
N
575/60/3
518/633
1
5.7
38.9
2.2
7.9
9.3
15
N/A
N/A
N/A
N/A
G
208/230/60/1
197/254
1
30.8
178.0
4.0
34.8
42.5
70
1.1
35.9
43.6
70
45
H
208/230/60/3
197/254
1
19.6
138.0
4.0
23.6
28.5
45
1.1
24.7
29.6
F*
460/60/3*
414/506
1
8.2
66.1
2.6
10.8
12.9
20
1.3
12.1
14.2
20
N
575/60/3
518/633
1
6.6
55.3
1.5
8.1
9.8
15
N/A
N/A
N/A
N/A
* NEUTRAL CONNECTION REQUIRED! All F Voltage (460 vac) units with internal secondary circulators require a four wire power supply with neutral.
Internal secondary circulators are rated 265 vac and are wired between one hot leg and neutral.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 56
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Electrical Data – High Static PSC Motor & Secondary Pump
All TS Units with High Static PSC Fan Motor
Model
018
024
030
036
042
048
060
Voltage
Code
Rated
Voltage
Voltage
Min/
Max
QTY
RLA
G
208/230/60/1
197/254
1
E
265/60/1
239/292
1
G
208/230/60/1
197/254
1
TS (H.S. PSC) Units
TS Units with H.S. PSC Fan Motor
and Secondary Pump
LRA
Fan
Motor
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
Pump
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
9.0
48.0
1.1
10.1
12.4
20
0.4
10.5
12.8
20
8.4
40.0
0.9
9.3
11.4
15
0.7
10.0
12.1
20
13.5
58.3
1.8
15.3
18.7
30
0.4
15.7
19.1
30
Compressor
E
265/60/1
239/262
1
9
54.0
1.4
10.4
12.7
20
0.7
11.1
13.4
20
H
208/230/60/3
197/254
1
7.1
55.4
1.8
8.9
10.7
15
0.4
9.3
11.1
15
F*
460/60/3*
414/506
1
3.5
28.0
1
4.5
5.4
15
0.7
5.2
6.1
15
G
208/230/60/1
197/254
1
12.8
64.0
2.2
15.0
18.2
30
0.8
15.8
19.0
30
E
265/60/1
239/292
1
10.9
60.0
1.7
12.6
15.3
25
0.7
13.3
16.0
25
H
208/230/60/3
197/254
1
8.3
58.0
2.2
10.5
12.6
20
0.8
11.3
13.4
20
F*
460/60/3*
414/506
1
5.1
28.0
1.0
6.1
7.4
15
0.7
6.8
8.1
15
G
208/230/60/1
197/254
1
16.0
77.0
2.2
18.2
22.2
35
0.8
19.0
23.0
35
E
265/60/1
239/292
1
12.2
72.0
1.7
13.9
29.2
25
0.7
14.6
17.7
25
H
208/230/60/3
197/254
1
10
71.0
2.2
12.2
14.7
25
0.8
13.0
15.5
25
F*
460/60/3*
414/506
1
4.7
38.0
1.0
5.7
6.9
15
0.7
6.4
7.6
15
G
208/230/60/1
197/254
1
16.7
79.0
2.7
19.4
23.6
35
0.8
20.2
24.4
40
E
265/60/1
239/292
1
13.5
72.0
2.9
16.4
19.8
30
0.7
17.1
20.5
30
H
208/230/60/3
197/254
1
10.4
73.0
2.7
13.1
15.7
25
0.8
13.9
16.5
25
F*
460/60/3*
414/506
1
5.8
38.0
1.7
7.5
9.0
15
0.7
8.2
9.7
15
N
575/60/3
518/633
1
3.8
36.5
1.4
5.2
6.2
15
N/A
N/A
N/A
N/A
G
208/230/60/1
197/254
1
21.8
117.0
2.6
24.4
29.9
50
0.8
25.2
30.7
50
H
208/230/60/3
197/254
1
13.7
83.1
2.6
16.3
19.7
30
0.8
17.1
20.5
30
F*
460/60/3*
414/506
1
6.2
41.0
1.8
8.0
9.6
15
0.7
8.7
10.3
15
N/A
N
575/60/3
518/633
1
4.8
33.0
1.4
6.2
7.4
15
N/A
N/A
N/A
G
208/230/60/1
197/254
1
26.4
134.0
4.0
30.4
37.0
60
1.1
31.5
38.1
60
H
208/230/60/3
197/254
1
16
110.0
4.0
20.0
24.0
35
1.1
21.1
25.1
40
F*
460/60/3*
414/506
1
7.8
52.0
2.6
10.4
12.4
15
1.3
11.7
13.7
20
N
575/60/3
518/633
1
5.7
38.9
1.5
7.2
8.6
15
N/A
N/A
N/A
N/A
* NEUTRAL CONNECTION REQUIRED! All F Voltage (460 vac) units with internal secondary circulators require a four wire power supply with neutral.
Internal secondary circulators are rated 265 vac and are wired between one hot leg and neutral.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 57
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Electrical Data – ECM Motor & Secondary Pump
All TS Units with ECM Fan Motor
Model
018
024
030
036
042
048
060
070
TS Units (ECM)
TS Units with ECM Fan Motor
and Secondary Pump
LRA
Fan
Motor
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
Pump
FLA
Total
Unit
FLA
Min
Circuit
Amp
Max
Fuse/
HACR
9.0
48.0
3.9
12.9
15.2
20
0.4
13.3
15.6
20
8.4
40.0
3.2
11.6
13.7
20
0.7
12.3
14.4
20
13.5
58.3
3.9
17.4
20.8
30
0.4
17.8
21.2
30
Compressor
Voltage
Code
Rated
Voltage
Voltage
Min/Max
QTY
RLA
G
208/230/60/1
197/254
1
E
265/60/1
239/292
1
G
208/230/60/1
197/254
1
E
265/60/1
239/292
1
9
54.0
3.2
12.2
14.5
20
0.7
12.9
15.2
20
H
208/230/60/3
197/254
1
7.1
55.4
3.9
11.0
12.8
15
0.4
11.4
13.2
20
F*
460/60/3*
414/506
1
3.5
28.0
3.2
6.7
7.6
15
0.7
7.4
8.3
15
G
208/230/60/1
197/254
1
12.8
64.0
3.9
16.7
19.9
30
0.8
17.5
20.7
30
E
265/60/1
239/292
1
10.9
60.0
3.2
14.1
16.8
25
0.7
14.8
17.5
25
H
208/230/60/3
197/254
1
8.3
58.0
3.9
12.2
14.3
20
0.8
13.0
15.1
20
F*
460/60/3*
414/506
1
5.1
28.0
3.2
8.3
9.6
15
0.7
9.0
10.3
15
G
208/230/60/1
197/254
1
16.0
77.0
3.9
19.9
23.9
35
0.8
20.7
24.7
40
E
265/60/1
239/292
1
12.2
72.0
3.2
15.4
30.7
30
0.7
16.1
19.2
30
H
208/230/60/3
197/254
1
10
71.0
3.9
13.9
16.4
25
0.8
14.7
17.2
25
F*
460/60/3*
414/506
1
4.7
38.0
3.2
7.9
9.1
15
0.7
8.6
9.8
15
G
208/230/60/1
197/254
1
16.7
79.0
3.9
20.6
24.8
40
0.8
21.4
25.6
40
E
265/60/1
239/292
1
13.5
72.0
3.2
16.7
20.1
30
0.7
17.4
20.8
30
H
208/230/60/3
197/254
1
10.4
73.0
3.9
14.3
16.9
25
0.8
15.1
17.7
25
F*
460/60/3*
414/506
1
5.8
38.0
3.2
9.0
10.5
15
0.7
9.7
11.2
15
G
208/230/60/1
197/254
1
21.8
117.0
6.9
28.7
34.2
50
0.8
29.5
35.0
50
E
265/60/1
239/292
1
16.3
98.0
6.0
22.3
26.4
40
0.7
23.
27.1
40
H
208/230/60/3
197/254
1
13.7
83.1
6.9
20.6
24.0
35
0.8
21.4
24.8
35
F*
460/60/3*
414/506
1
6.2
41.0
6.0
12.2
13.8
20
0.7
12.9
14.5
20
G
208/230/60/1
197/254
1
26.4
134.0
6.9
33.3
39.9
60
1.1
34.4
41.0
60
E
265/60/1
239/292
1
19.9
130.0
6.0
25.9
30.9
50
1.3
27.2
32.2
50
H
208/230/60/3
197/254
1
16
110.0
6.9
22.9
26.9
40
1.1
24.0
28.0
40
F*
460/60/3*
414/506
1
7.8
52.0
6.0
13.8
15.8
20
1.3
15.1
17.1
20
G
208/230/60/1
197/254
1
30.8
178.0
6.9
37.7
45.4
70
1.1
37.9
45.6
70
H
208/230/60/3
197/254
1
19.6
138.0
6.9
26.5
31.4
50
1.1
27.6
32.5
50
F*
460/60/3*
414/506
1
8.2
66.1
6.0
14.2
16.3
20
1.3
15.5
17.6
25
* NEUTRAL CONNECTION REQUIRED! All F Voltage (460 vac) units with ECM motors/internal secondary circulators require a four wire power supply with neutral. ECM
motors/internal secondary circulators are rated 265 vac and are wired between one hot leg and neutral.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 58
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
TS Series Wiring Diagram Matrix
Only CXM and DXM diagrams, with a representative diagram of LON and MPC Options are presented in this submittal.
Other diagrams can be located online at climatemaster.com using the part numbers presented below.
Model
Refrigerant
Wiring Diagram
Part Number
Electrical
EarthPure®
HFC-410A
DDC
96B0006N28
-
96B0006N16
LON
96B0006N14
TS Series
Single
Phase
Control
-
96B0006N22
LON
96B0006N20
MPC
96B0006N17
ECM
MPC
CXM
96B0006N24
96B0006N19
Fan
Motor
PSC
-
208/230-60-1
265-60-1
LON
ECM
96B0006N15
MPC
ClimaDry®
96B0038N66
DXM
96B0006N25
-
96B0006N23
LON
96B0006N21
MPC
96B0006N33
ClimaDry®
PSC
96B0007N18
-
96B0007N16
LON
96B0007N14
MPC
ECM
CXM
TS Series
Three
Phase
(230
Style)
EarthPure®
HFC-410A
96B0007N24
-
96B0007N22
LON
96B0007N20
MPC
96B0007N19
PSC
-
208/230-60-3
96B0007N17
LON
96B0007N15
MPC
ECM
ClimaDry®
96B0007N29
DXM
96B0007N25
-
96B0007N23
LON
96B0007N21
MPC
96B0007N30
ClimaDry®
PSC
96B0008N18
-
96B0008N16
LON
96B0008N14
MPC
ECM
CXM
TS Series
Three
Phase
(460
Style)
EarthPure®
HFC-410A
96B0008N24
-
96B0008N22
LON
96B0008N20
MPC
96B0008N19
460-60-3
PSC
-
96B0008N17
LON
96B0008N15
MPC
ECM
96B0216N22
DXM
ClimaDry®
96B0008N25
-
96B0008N23
LON
96B0008N21
MPC
PSC
All wiring diagrams available at climatemaster.com.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 59
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Typical Wiring Diagram – Single Phase TS Units with CXM Controller
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 60
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Typical Wiring Diagram – Three Phase TS Units with DXM Controller
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 61
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Typical Wiring Diagram – Three Phase TS Units with CXM Controller and ECM Blower
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 62
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Typical Wiring Diagram – Single Phase TS Units with CXM, MPC, and ECM Controller
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 63
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Typical Wiring Diagram – Single Phase TS Units with ClimaDry® II and ECM Blower
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 64
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Tranquility® 20 (TS) Series 60Hz
Engineering Specifications – Page 1
General:
Furnish and install ClimateMaster Tranquility® “TS” Water Source Heat Pumps, as indicated on the plans. Equipment shall be
completely assembled, piped and internally wired. Capacities and characteristics as listed in the schedule and the specifications that
follow.
Units shall be supplied completely factory built capable of operating over an entering water temperature range from 20° to 120°F
(-6.7° to 48.9°C) as standard. Equivalent units from other manufacturers may be proposed provided approval to bid is given 10 days
prior to bid closing. All equipment listed in this section must be rated and certified in accordance with Air-Conditioning, Heating and
Refrigeration Institute/International Standards Organization (AHRI/ISO 13256-1). All equipment must be tested, investigated, and
determined to comply with the requirements of the standards for Heating and Cooling Equipment UL-1995 for the United States and
CAN/CSA-C22.2 NO.236 for Canada, by Intertek Testing Laboratories (ETL). The units shall have AHRI/ISO and ETL-US-C labels.
All units shall be fully quality tested by factory run testing under normal operating conditions as described herein. Quality control
system shall automatically perform via computer: triple leak check, pressure tests, evacuation and accurately charge system, perform
detailed heating and cooling mode tests, and quality cross check all operational and test conditions to pass/fail criteria. Detailed
report card will ship with each unit displaying status for critical tests and components. Note: If unit fails on any cross check, it shall
not be allowed to ship. Serial numbers will be recorded by factory and furnished to contractor on report card for ease of unit
warranty status. Units tested without water flow are not acceptable.
Basic Construction:
Horizontal Units shall have one of the following air flow arrangements: Left Inlet/Straight (Right) Discharge; Right Inlet/Straight (Left)
Discharge; Left Inlet/Back Discharge; or Right Inlet/Back Discharge as shown on the plans. Units must have the ability to be field
convertible from straight to back or back to straight discharge with no additional parts or unit structure modification. Horizontal units
will have factory installed hanger brackets with rubber isolation grommets packaged separately.
Vertical Units shall have one of the following air flow arrangements: Left Return/Top Discharge, Right Return/Top Discharge, Left
Return/Bottom Discharge, Right Return/Bottom Discharge as shown on the plans.
If units with these arrangements are not used, the contractor is responsible for any extra costs incurred by other trades. All units
(horizontal and vertical) must have a minimum of three access panels for serviceability of compressor compartment. Units having only
one access panel to compressor/heat exchangers/expansion device/refrigerant piping shall not be acceptable.
Compressor section interior surfaces shall be lined with 1/2 inch (12.7mm) thick, 1-1/2 lb/ft3 (24 kg/m3) acoustic type glass fiber
insulation. Air handling section interior surfaces shall be lined with 1/2 in (12.7mm) thick, 1-1/2 lb/ft3 (24 kg/m3) foil faced fiber
insulation for ease of cleaning. Insulation placement shall be designed in a manner that will eliminate any exposed edges to prevent
the introduction of glass fibers into the air stream. Units without foil faced insulation in the air handling section will not be
accepted.
The heat pumps shall be fabricated from heavy gauge galvanized steel with powder coat paint finish. Both sides of the steel shall be
painted for added protection.
Standard cabinet panel insulation must meet NFPA 90A requirements, air erosion and mold growth limits of UL-181, stringent fungal
resistance test per ASTM-C1071 and ASTM G21, and shall meet zero level bacteria growth per ASTM G22. Unit insulation must meet
these stringent requirements or unit(s) will not be accepted.
All horizontal units to have factory installed 1” (25.4mm) discharge air duct collars, 1” (25.4mm) filter rails with 1” (25.4mm) filters
factory installed, and factory installed unit-mounting brackets. Vertical units to have field installed discharge air duct collar, shipped
loose and 1” (25.4mm) filter rails with 1” (25.4mm) filters factory installed. If units with these factory-installed provisions are not
used, the contractor is responsible for any extra costs to field install these provisions, and/or the extra costs for his subcontractor to install these provisions.
All units must have an insulated panel separating the fan compartment from the compressor compartment. Units with the compressor
in the air stream are not acceptable. Units shall have a factory installed 1 inch (25.4mm) wide filter bracket for filter removal from either
side. Units shall have a 1 inch (25.4mm) thick throwaway type glass fiber filter. The contractor shall purchase one spare set of filters and
replace factory shipped filters on completion of start-up. Filters shall be standard sizes. If units utilize non-standard filter sizes then the
contractor shall provide 12 spare filters for each unit.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 65
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Tranquility® 20 (TS) Series 60Hz
Engineering Specifications – Page 2
Cabinets shall have separate holes and knockouts for entrance of line voltage and low voltage control wiring. All factory-installed
wiring passing through factory knockouts and openings shall be protected from sheet metal edges at openings by plastic ferrules.
Supply and return water connections shall be copper FPT fittings, and shall be securely mounted flush to the cabinet corner post
allowing for connection to a flexible hose without the use of a back-up wrench. Water connections that protrude through the cabinet
or require the use of a backup wrench shall not be allowed. All water connections and electrical knockouts must be in the compressor
compartment corner post as to not interfere with the serviceability of unit. Contractor shall be responsible for any extra costs involved
in the installation of units that do not have this feature. Contractor must ensure that units can be easily removed for servicing and
coordinate locations of electrical conduit and lights with the electrical contractor.
Option: Contractor shall install 2-inch (50.8mm) filter racks with removable access door and 2 inch (50.8mm) MERV11 pleated
throwaway filters on all units.
Option: UltraQuiet package (available on TS018-070 Units) shall consist of high technology sound attenuating material that is
strategically applied to the compressor and air handling compartment casings and fan scroll in addition to the standard
ClimaQuiet system design, to further dampen and attenuate sound transmissions
Option: The unit will be supplied with internally factory mounted two-way water valve for variable speed pumping requirements. A
factory-mounted or field-installed high pressure switch shall be installed in the water piping to disable compressor operation
in the event water pressures build due to water freezing in the piping system.
Option: The unit will be supplied with internally factory mounted automatic water flow regulators.
Option: The unit will be supplied with internally mounted secondary pump for primary/secondary applications, including one-pipe
systems.
Option: The unit shall be supplied with extended range Insulation option, which adds closed cell insulation to internal water lines, and
provides insulation on suction side refrigeration tubing including refrigerant to water heat exchanger.
Fan and Motor Assembly:
Blower shall have inlet rings to allow removal of wheel and motor from one side without removing housing. Units shall have a directdrive centrifugal fan. The fan motor shall be 3-speed (2-speed for 575V), permanently lubricated, PSC type, with internal thermal
overload protection. Units supplied without permanently lubricated motors must provide external oilers for easy service. The fan
motor on small and medium size units (006-048) shall be isolated from the fan housing by a torsionally flexible motor mounting system
with rubber type grommets to inhibit vibration induced high noise levels associated with “hard wire belly band” motor mounting. The
fan motor on larger units (060 & 070) shall be isolated with flexible rubber type isolation grommets only. The fan and motor assembly
must be capable of overcoming the external static pressures as shown on the schedule. Airflow / Static pressure rating of the unit shall
be based on a wet coil and a clean filter in place. Ratings shall NOT be acceptable based on a dry coil and/or no air filter.
Option: ECM motors (sizes 018 to 070): The fan motor shall be an ECM variable speed ball bearing type motor. The ECM fan motor
shall provide soft starting, maintain constant CFM over its static operating range and provide airflow adjustment on its control
board. The fan motor shall be isolated from the housing by rubber grommets. The motor shall be permanently lubricated
and have thermal overload protection. A special dehumidification mode shall be provided to allow lower airflows in cooling
for better dehumidification. The dehumidification mode shall be selectable via a dip switch on the control board or may be
controlled externally from a humidistat.
Option: High static PSC motors (sizes 018-060).
Refrigerant Circuit:
All units shall contain an EarthPure® (HFC-410A) sealed refrigerant circuit including a high efficiency scroll or rotary compressor
designed for heat pump operation, a thermostatic expansion valve for refrigerant metering, an enhanced corrugated aluminum lanced
fin and rifled copper tube or all aluminum micro channel refrigerant to air heat exchanger, reversing valve, coaxial (tube in tube)
refrigerant to water heat exchanger, and safety controls including a high pressure switch, low pressure switch (loss of charge), water
coil low temperature sensor, and air coil low temperature sensor. Access fittings shall be factory installed on high and low pressure
refrigerant lines to facilitate field service. Activation of any safety device shall prevent compressor operation via a microprocessor
lockout circuit. The lockout circuit shall be reset at the thermostat or at the contractor supplied disconnect switch. Units that cannot
be reset at the thermostat shall not be acceptable.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 66
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Tranquility® 20 (TS) Series 60Hz
Engineering Specifications – Page 3
Hermetic compressors shall be internally sprung. The compressor shall have a dual level vibration isolation system. The compressor
will be mounted on specially engineered sound-tested EPDM vibration isolation grommets to a large heavy gauge compressor
mounting plate, which is then isolated from the cabinet base with rubber grommets for maximized vibration attenuation. All units
(except units with rotary compressors) shall include a discharge muffler to further enhance sound attenuation. Compressor shall have
thermal overload protection. Compressor shall be located in an insulated compartment away from air stream to minimize sound
transmission.
Refrigerant to air heat exchangers shall utilize enhanced corrugated lanced aluminum fins and rifled copper tube or all aluminum micro
channel construction rated to withstand 625 PSIG (4309 kPa) refrigerant working pressure. Refrigerant to water heat exchangers shall
be of copper inner water tube and steel refrigerant outer tube design, rated to withstand 625 PSIG (4309 kPa) working refrigerant
pressure and 500 PSIG (3445 kPa) working water pressure. The refrigerant to water heat exchanger shall be “electro-coated” with a
low cure cathodic epoxy material a minimum of 0.4 mils thick (0.4 – 1.5 mils range) on all surfaces. The black colored coating shall
provide a minimum of 1000 hours salt spray protection per ASTM B117-97 on all external steel and copper tubing. The material shall
be formulated without the inclusion of any heavy metals and shall exhibit a pencil hardness of 2H (ASTM D3363-92A), crosshatch
adhesion of 4B-5B (ASTM D3359-95), and impact resistance of 160 in-lbs (184 kg-cm) direct (ASTM D2794-93).
Refrigerant metering shall be accomplished by thermostatic expansion valve only. Expansion valves shall be dual port balanced types
with external equalizer for optimum refrigerant metering. Units shall be designed and tested for operating ranges of entering water
temperatures from 20° to 120°F (-6.7° to 48.9°C). Reversing valve shall be four-way solenoid activated refrigerant valve, which shall
default to heating mode should the solenoid fail to function. If the reversing valve solenoid defaults to cooling mode, an additional
low temperature thermostat must be provided to prevent over-cooling an already cold room.
Option: The unit shall be supplied with a hot water generator (desuperheater).
Option: The unit will be supplied with cupro-nickel coaxial water to refrigerant heat exchanger.
Option: The refrigerant to air heat exchanger shall be coated.
Option: Unit shall include ClimaDry®II reheat option. Only modulating reheat that will adjust capacity based upon supply air
temperature to provide “neutral” (72ºF, 22.2ºC) constant air temperature will be accepted. “Neutral” supply air temperature
shall be provided regardless of entering loop water temperatures (above 55ºF, 12.8ºC) or refrigerant condensing pressures.
Control of reheat must be accomplished via a humidistat or dehumidistat contact closure. Refrigerant circuit must be AHRI
certified. Approved equal manufacturers may provide pre-engineered integrated modulating hot gas reheat within the unit
cabinet, or the installing contractor in conjunction with the “approved equal” unit manufacturer can provide for approval
(during the submittal phase) an engineered system consisting of: a duct mounted hot water coil, small circulating pump,
modulating control valve, and associated piping using the discharge condenser water off of the unit as the heating medium.
All design costs and costs of field installed items including additional power wiring to pump, and control wiring to and from
pump and control valve to unit shall be borne by mechanical contractor. Refrigerant circuits that are not AHRI certified
when the reheat option is applied will not be accepted.
Drain Pan:
The drain pan shall be constructed of 201LN Stainless Steel to inhibit corrosion. This corrosion protection system shall meet the
stringent 1000 hour salt spray test per ASTM B117. If plastic type material is used, it must be HDPE (High Density Polyethylene) to
avoid thermal cycling shock stress failure over the lifetime of the unit. Drain pan shall be fully insulated. Drain outlet shall be located
at pan as to allow unobstructed drainage of condensate. Drain outlet for horizontal units shall be connected from pan directly to
FPT fitting. No hidden internal tubing extensions from pan outlet extending to unit casing (that can create drainage problems)
will be accepted. The unit as standard will be supplied with solid-state electronic condensate overflow protection. Mechanical float
switches will NOT be accepted.
Vertical units shall be furnished with a PVC FPT condensate drain connection and an internal factory installed condensate trap. If units
without an internal trap are used, the contractor is responsible for any extra costs to field install these provisions, and/or the extra
costs for his sub-contractor to install these provisions.
Electrical:
A control box shall be located within the unit compressor compartment and shall contain a 50VA transformer, 24 volt activated, 2 or 3
pole compressor contactor, terminal block for thermostat wiring and solid-state controller for complete unit operation. Reversing valve
and fan motor wiring shall be routed through this electronic controller. Units shall be name-plated for use with time delay fuses or
HACR circuit breakers. Unit controls shall be 24 Volt and provide heating or cooling as required by the remote thermostat/sensor.
Option: Units shall be supplied with factory installed non-fused electrical service disconnect switch.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 67
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Tranquility® 20 (TS) Series 60Hz
Engineering Specifications – Page 4
Solid State Control System (CXM):
Units shall have a solid-state control system. Units utilizing electro-mechanical control shall not be acceptable. The control system
microprocessor board shall be specifically designed to protect against building electrical system noise contamination, EMI, and RFI
interference. The control system shall interface with a heat pump type thermostat. The control system shall have the following features:
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
Anti-short cycle time delay on compressor operation.
Random start on power up mode.
Low voltage protection.
High voltage protection.
Unit shutdown on high or low refrigerant pressures.
Unit shutdown on low water temperature.
Condensate overflow electronic protection.
Option to reset unit at thermostat or disconnect.
Automatic intelligent reset. Unit shall automatically reset the unit 5 minutes after trip if the fault has cleared. If a fault occurs 3 times
sequentially without thermostat meeting temperature, then lockout requiring manual reset will occur.
Ability to defeat time delays for servicing.
Light emitting diode (LED) on circuit board to indicate high pressure, low pressure, low voltage, high voltage, low water/air
temperature cut-out, condensate overflow, and control voltage status.
The low-pressure switch shall not be monitored for the first 120 seconds after a compressor start command to prevent nuisance
safety trips.
24V output to cycle a motorized water valve or other device with compressor contactor.
Unit Performance Sentinel (UPS). The UPS warns when the heat pump is running inefficiently.
Water coil low temperature sensing (selectable for water or antifreeze).
Air coil low temperature sensing.
NOTE: Units not providing the 8 safety protections of anti-short cycle, low voltage, high voltage, high refrigerant pressure,
low pressure (loss of charge), air coil low temperature cut-out, water coil low temperature cut-out, and condensate overflow
protections will not be accepted.
Solid State ECM Fan Control Board (60 Hz Units with ECM Fan Option Only):
Airflow selection shall be accomplished via 3 jumper switches on the ECM control board. Actual airflow shall be indicated by the
CFM LED with each 100 CFM being represented by one flash of the LED. Airflow shall be automatically maintained (±5%) by the
ECM motor regardless of external static pressure up to its maximum output capacity. A jumper shall allow selection of a special
dehumidification mode, which reduces airflow in cooling by 25% to increase the latent capacity of the unit. A terminal shall be
provided on the control board to allow an external humidistat to activate dehumidification mode.
Option: Enhanced solid state control system (DXM)
This control system features two stage control of cooling and two stage control of heating modes for exacting temperature and
dehumidification purposes.
This control system coupled with a multi-stage thermostat will better dehumidify room air by automatically running the heat pump’s
fan at lower speed on the first stage of cooling thereby implementing low sensible heat ratio cooling. On the need for higher cooling
performance the system will activate the second stage of cooling and automatically switch the fan to the higher fan speed setting.
This system may be further enhanced with a humidistat. Units not having automatic low sensible heat ratio cooling will not be
accepted; as an alternate a hot gas reheat coil may be provided with control system for automatic activation.
Control shall have all of the above mentioned features of the CXM control system along with the following expanded features:
a.
b.
c.
d.
e.
f.
g.
h.
i.
Removable thermostat connector.
Night setback control.
Random start on return from night setback.
Minimized reversing valve operation (Unit control logic shall only switch the reversing valve when cooling is demanded for the first
time. The reversing valve shall be held in this position until the first call for heating, ensuring quiet operation and increased valve
life.).
Override temperature control with 2-hour timer for room occupant to override setback temperature at the thermostat.
Dry contact night setback output for digital night setback thermostats.
Ability to work with heat pump or heat/cool (Y,W) type thermostats.
Ability to work with heat pump thermostats using O or B reversing valve control.
Emergency shutdown contacts.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 68
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Tranquility® 20 (TS) Series 60Hz
Engineering Specifications – Page 5
j.
k.
l.
m.
n.
o.
Boilerless system heat control at low loop water temperature.
Ability to allow up to 3 units to be controlled by one thermostat.
Relay to operate an external damper.
Ability to automatically change fan speed from multistage thermostat.
Relay to start system pump.
75 VA control transformer. Control transformer shall have load side short circuit and overload protection via a built in circuit
breaker.
Digital Night Setback with Pump Restart (DXM w/ ATP32U03/04)
The unit will be provided with a Digital Night Setback feature using an accessory relay on the DXM controller with an ATP32U03/04
thermostat and an external, field-provided time clock. The external time clock will initiate and terminate the night setback period. The
thermostat will have a night setback override feature with a programmable override time period. An additional accessory relay on the
unit DXM controller will energize the building loop pump control for the duration of the override period. (Note: this feature requires
additional low voltage wiring. Consult Application Drawings for details.)
Remote Service Sentinel (CXM/DXM):
Solid state control system shall communicate with thermostat to display (at the thermostat) the unit status, fault status, and specific
fault condition, as well as retrieve previously stored fault that caused unit shutdown. The Remote Service Sentinel allows building
maintenance personnel or service personnel to diagnose unit from the wall thermostat. The control board shall provide a signal to
the thermostat fault light, indicating a lockout. Upon cycling the G (fan) input 3 times within a 60 second time period, the fault light
shall display the specific code as indicated by a sequence of flashes. A detailed flashing code shall be provided at the thermostat
LED to display unit status and specific fault status such as over/under voltage fault, high pressure fault, low pressure fault, low water
temperature fault, condensate overflow fault, etc. Units that do not provide this remote service sentinel shall not be acceptable.
Option: Lonworks interface system
Units shall have all the features listed above (either CXM or DXM) and the control board will be supplied with a LONWORKS interface
board, which is LONMark certified. This will permit all units to be daisy chained via a 2-wire twisted pair shielded cable. The following
points must be available at a central or remote computer location:
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
q.
r.
space temperature
leaving water temperature
discharge air temperature
command of space temperature setpoint
cooling status
heating status
low temperature sensor alarm
low pressure sensor alarm
high pressure switch alarm
condensate sensor alarm
hi/low voltage alarm
fan “ON/AUTO” position of space thermostat as specified above
unoccupied/occupied command
cooling command
heating command
fan “ON/AUTO” command
fault reset command
itemized fault code revealing reason for specific shutdown fault (any one of 7)
This option also provides the upgraded 75VA control transformer with load side short circuit and overload protection via a built in
circuit breaker.
Option: MPC (Multiple Protocol Control) interface system
Units shall have all the features listed above (either CXM or DXM) and the control board will be supplied with a Multiple Protocol
interface board. Available protocols are BACnet MS/TP, Modbus, or Johnson Controls N2. The choice of protocol shall be field
selectable/changeable via the use of a simple selector switch. Protocol selection shall not require any additional programming or
special external hardware or software tools. This will permit all units to be daisy chain connected by a 2-wire twisted pair shielded
cable. The following points must be available at a central or remote computer location:
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 69
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Tranquility® 20 (TS) Series 60Hz
Engineering Specifications – Page 6
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
m.
n.
o.
p.
q.
r.
space temperature
leaving water temperature
discharge air temperature
command of space temperature setpoint
cooling status
heating status
low temperature sensor alarm
low pressure sensor alarm
high pressure switch alarm
condensate overflow alarm
hi/low voltage alarm
fan “ON/AUTO” position of space thermostat as specified above
unoccupied / occupied command
cooling command
heating command
fan “ON/AUTO” command
fault reset command
itemized fault code revealing reason for specific shutdown fault (any one of 7)
This option also provides the upgraded 75VA control transformer with load side short circuit and overload protection via a built in
circuit breaker.
Warranty:
Climate Master shall warranty equipment for a period of 12 months from start up or 18 months from shipping (which ever occurs first).
Option: Extended 4-year compressor warranty covers compressor for a total of 5 years.
Option: Extended 4-year refrigeration circuit warranty covers coils, reversing valve, expansion valve and compressor for a total of 5
years.
Option: Extended 4-year control board warranty covers the CXM/DXM control board for a total of 5 years.
FIELD INSTALLED OPTIONS
Hose Kits:
All units shall be connected with hoses. The hoses shall be 2 feet (61cm) long, braided stainless steel; fire rated hoses complete with
adapters. Only fire rated hoses will be accepted.
Valves:
The following valves are available and will be shipped loose:
a. Ball valve; bronze material, standard port full flow design, FPT connections.
b. Ball valve with memory stop and PT port.
c. “Y” strainer with blowdown valve; bronze material, FPT connections.
d. Motorized water valve; slow acting, 24v, FPT connections.
Hose Kit Assemblies:
The following assemblies ship with the valves already assembled to the hose described:
a. Supply and return hoses having ball valve with PT port.
b. Supply hose having ball valve with PT port; return hose having automatic flow regulator valve with PT ports, and ball valve.
c. Supply hose having “Y” strainer with blowdown valve, and ball valve with PT port; return hose having automatic flow regulator with
PT ports, and ball valve.
d. Supply hose having “Y” strainer with blowdown valve, and ball valve with PT port;
return hose having ball valve with PT port.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 70
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Tranquility® 20 (TS) Series 60Hz
Engineering Specifications – Page 7
Thermostats:
The thermostat shall be a ClimateMaster mechanical or electronic type thermostat as selected below with the described features:
a. Single Stage Standard Manual Changeover (ATM11C11)
Thermostat shall be a single-stage, horizontal mount, manual changeover with HEAT-OFF-COOL system switch and fan ON-AUTO
switch. Thermostat shall have a mechanical temperature set point indicator. Thermostat shall only require 4 wires for connection.
Mercury bulb thermostats are not acceptable.
b. Single Stage Digital Auto or Manual Changeover (ATA11U01)
Thermostat shall be a single-stage, digital, auto or manual changeover with HEAT-OFF-COOL-AUTO system switch and fan ONAUTO switch. Thermostat shall have an LCD display with temperature and set-point(s) in ºF or ºC. The Thermostat shall provide
permanent memory of set-point(s) without batteries. A fault LED shall be provided to display specific fault condition. Thermostat
shall provide temperature display offset for custom applications.
c. Single Stage Digital Auto or Manual Changeover and Manual Two Fan Speed Selections (ATA11U03)
Thermostat shall be a single-stage, digital, auto or manual changeover with HEAT-OFF-COOL-AUTO system settings, high and
low fan settings and fan ON-AUTO settings. Thermostat shall have an LCD display with temperature, setpoint(s), mode, and
status indication. The temperature indication shall be selectable for ºF or ºC. The thermostat shall provide permanent memory
of setpoint(s) without batteries. Thermostat shall provide heating setpoint range limit, cooling setpoint range limit, temperature
display offset, keypad lockout, dead-band range setting, and inter-stage differential settings. Thermostat shall allow the use of an
accessory remote temperature sensor (17B0008N05). Thermostat navigation shall be accomplished via 4 push buttons.
d. Multistage Digital Automatic Changeover (ATA22U01)
Thermostat shall be multi-stage (2H/2C), manual or automatic changeover with HEAT-OFF-COOL-AUTO-EM HEAT system settings
and fan ON-AUTO settings. Thermostat shall have an LCD display with temperature, set-point(s), mode, and status indication. The
temperature indication shall be selectable for ºF or ºC. The thermostat shall provide permanent memory of set-point(s) without
batteries. A fault LED shall be provided to indicate specific fault condition(s). Thermostat shall provide temperature display
offset for custom applications. Thermostat shall allow unit to provide better dehumidification with optional DXM controller by
automatically using lower fan speed on stage 1 cooling (higher latent cooling) as main cooling mode, and automatically shifting to
high speed fan on stage 2 cooling.
e. Multistage Manual Changeover Programmable 5/2 Day (ATP21U01)
Thermostat shall be 5 day/2 day programmable (with up to 4 set points per day), multi-stage (2H/1C), manual changeover with
HEAT-OFF-COOL-EM HEAT system settings and fan ON-AUTO settings. Thermostat shall have an LCD display with temperature,
set-point(s), mode, and status indication. The temperature indication shall be selectable for ºF or ºC. The thermostat shall provide
permanent memory of set-point(s) without batteries. Thermostat shall provide convenient override feature to temporarily change
setpoint.
f. Multistage Automatic or Manual Changeover Programmable 7 Day (ATP32U03C)
Thermostat shall be 7 day programmable (with up to 4 set points per day), multi-stage (3H/2C), automatic or manual changeover
with HEAT-OFF-COOL-AUTO-EM HEAT system settings and fan ON-AUTO settings. Thermostat shall have a blue backlit dot
matrix LCD display with temperature, set-points, mode, and status indication. The temperature indication shall be selectable for ºF
or ºC. Time display shall be selectable for 12 or 24 hour clock. Fault identification shall be provided (when used with ClimateMaster
CXM or DXM controls) to simplify troubleshooting by providing specific unit fault at the thermostat with red backlit LCD during
unit lockout. The thermostat shall provide permanent memory of set-points without batteries. Thermostat shall provide heating
set-point range limit, cooling set-point range limit, temperature display offset, keypad lockout, dead-band range setting, and interstage differential settings. Thermostat shall provide progressive recovery to anticipate time required to bring space temperature
to the next programmed event. Thermostat shall provide an installer setup for configuring options and for setup of servicing
contractor name and contact information. Thermostat shall allow the use of an accessory remote and/or outdoor temperature
sensor (AST008). Thermostat navigation shall be accomplished via five buttons (up/down/right/left/select) with menu-driven
selections for ease of use and programming.
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 71
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Tranquility® 20 (TS) Series 60Hz
Engineering Specifications – Page 8
g. Multistage Automatic or Manual Changeover Programmable 7 Day with Humidity Control (ATP32U04C)
Thermostat shall be 7 day programmable (with up to 4 set points per day), multi-stage (3H/2C), automatic or manual
changeover with HEAT-OFF-COOL-AUTO-EM HEAT system settings and fan ON-AUTO settings. Separate dehumidification and
humidification set points shall be configurable for discreet outputs to a dehumidification option and/or an external humidifier.
Installer configuration mode shall allow thermostat dehumidification mode to operate with ClimaDry® reheat or with ECM fan
dehumidification mode via settings changes. Thermostat shall have a blue backlit dot matrix LCD display with temperature, relative
humidity, set-points, mode, and status indication. The temperature indication shall be selectable for ºF or ºC. Time display shall be
selectable for 12 or 24 hour clock. Fault identification shall be provided (when used with ClimateMaster CXM or DXM controls) to
simplify troubleshooting by providing specific unit fault at the thermostat with red backlit LCD during unit lockout. The thermostat
shall provide permanent memory of set-points without batteries. Thermostat shall provide heating set-point range limit, cooling
set-point range limit, temperature display offset, keypad lockout, dead-band range setting, and inter-stage differential settings.
Thermostat shall provide progressive recovery to anticipate time required to bring space temperature to the next programmed
event. Thermostat shall provide an installer setup for configuring options and for setup of servicing contractor name and contact
information. Thermostat shall allow the use of an accessory remote and/or outdoor temperature sensor (AST008). Thermostat
navigation shall be accomplished via five buttons (up/down/right/left/select) with menu-driven selections for ease of use and
programming.
DDC Sensors:
ClimateMaster wall mounted DDC sensor to monitor room temperature and interfaces with optional interface system described above.
Several types as described below:
a. Sensor only with no display (LON and MPC).
b. Sensor with override (LON only).
c. Sensor with setpoint adjustment and override (MPC only).
d. Sensor with setpoint adjustment and override, LCD display, status/fault indication (LON and MPC).
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 72
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Notes:
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 73
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Notes:
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 74
Rev.: 23 October,2015
Page ______ of ______
TS Series 60Hz - HFC-410A Submittal Data
Eng/I-P
Notes:
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 75
Rev.: 23 October,2015
Page ______ of ______
Revision Log
TS Series 60Hz - HFC-410A Submittal Data
Date
10/22/15
08/04/15
07/22/15
06/17/15
03/25/15
03/05/15
01/23/15
12/16/14
09/30/14
08/15/14
06/12/14
05/12/14
03/31/14
03/24/14
02/10/14
01/27/14
7/17/13
02/26/13
01/07/13
09/27/12
02/20/12
02/02/12
12/14/11
11/02/11
10/19/11
08/09/11
08/03/11
06/17/11
05/16/11
04/07/11
02/11/11
01/03/11
09/29/10
09/28/10
09/07/10
09/01/10
08/24/10
07/26/10
07/26/10
06/11/10
06/11/10
06/01/10
03/30/10
05/27/09
04/29/09
04/29/09
11/17/08
09/19/08
08/26/08
08/01/08
08/0407
05/14/07
04/19/07
04/19/07
12/14/06
11/16/06
11/16/06
11/16/06
11/19/06
11/19/06
07/19/06
07/19/06
07/19/06
12/23/05
11/30/05
11/30/05
11/30/05
11/30/05
08/15/05
08/15/05
08/15/05
08/15/05
08/15/05
06/20/05
06/20/05
06/20/05
06/20/05
03/30/05
03/30/05
03/30/05
Item:
Pages 48 and 51
Engineering Specifications and Unit Features
Page 13 & 14
Decoder - Page 7; Tables - Pages 13 & 53-58
Table - Page 43
Decoder - Page 7
Table - Page 56
Edits - Page 45 & 47
Text Edit - Page 67
TS060 E Voltage Elec. Tables
Rev. C Size 036 E Voltage
Air Coil Description page 66-67
Illustration - Page 48
ECM Blower Data - Page 38
Page 41
All
EAT Minimum Limit ClimaDry
AHRI Table
Physical Data Table
TS Vertical Upflow - Dimensional Data - TSV Right Return
EAT Limits
Recommended Minimum Installation Clearances for Vertical Units *
Engineering Specifications
ClimaDry® II option Information
ECM Control
Decoder
Dimensional Data, Optional Filter Frame
Unit Maximum Working Water Pressure
Engineering Specifications
Coated Air Coil Option
Electrical Data 018E and 024F ISP
Engineering Specification NOTICE
Performance Data Selection Notes
Format - All Pages
ECM Electrical Data
Engineering Specifications
ECM Blower Control
Engineering Specifications
Horizontal Units
Wiring Diagrams
Compressor Mounting Information and Graphics
Format - All Pages
Engineering Specifiations
TSH S.A. Dimensions
Performance Data/Blower Data
Stand-Alone and Big Book Submittals
Electrical Data Table (High Static PSC Motor & Secondary Pump)
Performance Data IP Table Corrected
TS HorizontaL Data Table
Engineering Specifications
Physical Data Table
Electrical Data Table
All
All
Table of Contents
Specifications
Dimensional Data
Electrical Data
Dimensional Data
Performance Data/Blower Data
Specifications
Wiring Diagrams
Electrical Data
ECM Blower Performance
Performance Data
Motorized Valves
Tables
Dimensional data
Physical Data
Blower Data, Electrical Data, Unit Specifications
Correction Factors
Physical Data
Dimensional Data
Electrical Data
Specifications
Entire Document
Electrical Data
ECM Motor
Specifications
Electrical Data
Horizontal Dimensions
Added Revision Log
Eng/I-P
Action:
Edited dimensions “T” on sizes 42,48
Updated, ECM Options Text, Edited Compressors Mount Text, Fan and Motor Assembly Text
Updated HWC Data
Updated
Updated Maximum Working Water Pressure
Updated
Updated
Updated
Updated
Added ECM with ISP and CWR
Added
Updated
Updated
Updated Max ESP
Updated Table 2
Updated Sizes 024-070 to Rev. C, added service clearances
Updated
Size 018 PSC Updated
Updated
Updated Blower Orientation
Updated
Updated
Merge data from ClimaDry® II Submittal
Updated CFM adjust settings
Updated
Added
Updated to Reflect New Safeties
Added Digital Night Setback with Pump Restart (DXM w/ ATP32U03/04)
Changed Description
Added
Updated
Updated
Updated
Updated
Updated
Added Ramp Down Feature
Updated
Supply Air Dimension M and Q updated
Updated
Updated to Reflect Spring/Grommet Change
Updated
Updated
Dimension M & Q changed
Size 018 data changes
Consolidated
036 E Data Corrected
Data Corrected
ClimaDry® Note Added
Max Working Pressure Table Added
Asterisks Added
Added Sizes 006, 009, & 012
Updated Size 018 for Rev.: B
Added Table of Contents
Updated Specifications for new Safety Agency
Corrected TSH18-030 Supply dimensions
Various updates
Updated dimensional data to new format
Added new rated voltage note
Updated thermostat offering
Added pressure switch for motorized valve option
Added secondary pump data, updated ClimaDry® data, various formatting changes
Updated CFM data
Added low temperature selection notes
Added Cv, MOPD, and WPD data
Updated all tables to new format
Added new dimensional drawings and installation and service notes
Added Coax volumes
Added ClimaDry® Reheat option
Updated verbiage - No data changes
Added Coax volume chart
Added corner weights - Horizontal units
Updated 030 “E” voltage total unit FLA & MCA
Updated verbiage in CXM section
Updated to Adobe Acrobat 7.0
Removed TS024 265V data
Added Information on new interface board
Updated specs to include mufflers
Updated 018, 024, 030
Updated dim. “H”
ClimateMaster works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice and may not be as described herein. Please contact ClimateMaster's Customer
Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties,
but are merely ClimateMaster's opinion or commendation of its products. The latest version of this document is available at climatemaster.com.
LC377 - 76
Rev.: 23 October,2015
Page ______ of ______

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project