batteries - battery holders - battery chargers

batteries - battery holders - battery chargers
BATTERIES - BATTERY HOLDERS - BATTERY CHARGERS
DAVID USE PHOTO
SD0010
ALKALINE CELLS
DAVID USE PHOTO
SD0010
RECHARGEABLE CELLS
DAVID USE PHOTO
SD0010
BATTERY CHARGERS
DAVID USE PHOTO
SD0010
BATTERY TESTER
DAVID USE PHOTO
SD0010
ALKALINE BATTERIES
BATTERY CHARGERS
BATTERY CLIPS
BATTERY HOLDERS
BATTERY PACK CONNECTORS
BATTERY SNAPS
BATTERY SOLDER TAGS
BATTERY TEST
BATTERY TESTERS
BUTTON CELLS
CAR BATTERY CHARGERS
COIN CELL HOLDERS
COIN CELLS
CYCLON CELLS
DELTA PEAK SMART CHARGER
DIGITAL CAMERA BATTERIES
HEAVY DUTY ZINC
CARBON BATTERIES
LiPo MONITOR
LiPo RECEIVER PACK MONITOR
LITHIUM PP3 BATTERY
MOBILE PHONE CHARGERS
Ni-MH BATTERIES
Ni-MH RACE PACKS
PCB MOUNTED COIN CELLS
PHOTOGRAPHIC/INSTRUMENT
BATTERIES
SEALED LEAD ACID BATTERIES
SEALED LEAD ACID
BATTERY CHARGERS
TELEPHONE BATTERY PACKS
ZINC CHLORIDE BATTERIES
CONTENTS
COIN CELLS
372
376 - 377
382
378 - 381
377
382
382
384
378
370
383 - 384
371
370
375
377
373
373
373
373
373
377
374 - 375
377
370
372 - 373
383
383
378
372
Last Revised 27/07/2011
369
SQUIRES MODEL & CRAFT TOOLS
BUTTON CELLS
ZINC AIR BUTTON CELLS a range of non rechargeable zinc air
button cells suitable for use in hearing aids, pagers and other
applications that require precise operational battery characteristics.
Zinc air cells start to produce energy only after the protective seal
has been removed, they offer twice the capacity of mercury cells
and have a flat voltage profile thereby giving maximum performance to the end of the life of the cell. Nominal voltage 1.4V.
ALKALINE BUTTON CELLS a range of popular size long life
alkaline manganese button cells. Nominal
voltage 1.5V. Extensively used in clocks,
calculators, cameras and meters etc.
CODE
TYPE
PRICE
Dia x Ht (mm)
L621
BPL621
L726
BPL726
L736
BPL736
L754
BPL754
L926
BPL926
L1121
BPL1121
L1131
BPL1131
L1142
BPL1142
L1154
BPL1154
6.8 x 2.1mm Button Cell AG1 x 1.......................
6.8 x 2.1mm Button Cell AG1 10 pack...............
7.9 x 2.6mm Button Cell AG2 x 1.......................
7.9 x 2.6mm Button Cell AG2 10 pack...............
7.9 x 3.6mm Button Cell AG3 x 1.......................
7.9 x 3.6mm Button Cell AG3 10 pack...............
7.9 x 5.4mm Button Cell AG5 x 1.......................
7.9 x 5.4mm Button Cell AG5 10 pack...............
9.5 x 2.6mm Button Cell AG7 x 1.......................
9.5 x 2.6mm Button Cell AG7 10 pack...............
11.6 x 2.1mm Button Cell AG8 x 1.......................
11.6 x 2.1mm Button Cell AG8 10 pack...............
11.6 x 3.1mm Button Cell AG10 x 1.....................
11.6 x 3.1mm Button Cell AG10 10 pack.............
11.6 x 4.2mm Button Cell AG12 x 1.....................
11.6 x 4.2mm Button Cell AG12 10 pack.............
11.6 x 5.4mm Button Cell AG13 x 1.....................
11.6 x 5.4mm Button Cell AG13 10 pack.............
£0.39
£3.50
£0.39
£3.50
£0.39
£3.50
£0.49
£4.40
£0.45
£4.00
£0.49
£4.40
£0.45
£4.00
£0.45
£4.00
£0.49
£4.40
SILVER OXIDE CELLS an extensive range of non rechargeable
silver oxide button cells suitable for use in calculators, cameras,
clocks. Silver oxide may be used
in place of alkaline button cells if
dimensions are compatible.
Nominal voltage 1.55V
CODE
TYPE
CODE
500-005
500-010
500-015
500-020
Dims (mm)
Dia Ht
Type
5.8 3.55
V10AT
7.9 3.6
V312AT
7.9 5.4
V13AT
11.6 5.4
V675AT
Equivalent
Duracell
DA10
DA312
DA13
DA675
Nominal
Volt
1.4
1.4
1.4
1.4
CODE
500-005
500-010
500-015
500-020
500-006
500-011
500-016
500-021
TYPE
5.8mm Zinc Air Button Cells x 1...........................
7.9mm Zinc Air Button Cells x 1...........................
7.9mm Zinc Air Button Cells x 1...........................
11.6mm Zinc Air Button Cells x 1.........................
5.8mm Zinc Air Button Cells 6 pack.....................
7.9mm Zinc Air Button Cells 6 pack.....................
7.9mm Zinc Air Button Cells 6 pack.....................
11.6mm Zinc Air Button Cells 6 pack...................
Capacity
60mAh
120mAh
230mAh
540mAh
PRICE
£1.30
£1.30
£1.30
£1.30
£6.99
£6.99
£6.99
£6.99
COIN CELLS
LITHIUM MANGANESE COIN CELLS a range of non rechargeable lithium manganese coin cells suitable for use in equipment
requiring a low quiescent current with short pulses up to a few hundred micro amps. Typically used in calculators, cameras and
watches. Nominal voltage 3.0V.
PRICE
Dia x Ht (mm)
SR41
BPSR41
SR43
BPSR43
SR44
BPSR44
SR45
BPSR45
SR48
BPSR48
SR54
BPSR54
SR55
BPSR55
SR57
SR58
BPSR58
SR59
BPSR59
SR60
BPSR60
01-0514
500-710
500-706
01-0520
500-708
01-0511
01-0532
SR69
BPSR69
SR521
BPSR521
370
7.9 x 3.6mm Silver Oxide Cell SG3 x 1.............. £0.55
7.9 x 3.6mm Silver Oxide Cell SG3 10 pack...... £4.95
11.6 x 4.2mm Silver Oxide Cell SG12 x 1............ £0.95
11.6 x 4.2mm Silver Oxide Cell SG12 10 pack.... £8.55
11.6 x 5.4mm Silver Oxide Cell SG13 x 1............ £1.95
11.6 x 5.4mm Silver Oxide Cell SG13 10 pack.... £17.55
9.5 x 3.6mm Silver Oxide Cell SG9 x 1.............. £0.60
9.5 x 3.6mm Silver Oxide Cell SG9 10 pack...... £5.40
7.9 x 5.4mm Silver Oxide Cell SG5 x 1.............. £0.60
7.9 x 5.4mm Silver Oxide Cell SG5 10 pack...... £5.40
11.6 x 3.1mm Silver Oxide Cell SG10 x 1............ £0.95
11.6 x 3.1mm Silver Oxide Cell SG10 10 pack.... £8.55
11.6 x 2.1mm Silver Oxide Cell SG8 x 1.............. £0.60
11.6 x 2.1mm Silver Oxide Cell SG8 10 pack...... £5.40
9.5 x 2.6mm Silver Oxide Cell SR57 x 1............ £0.90
7.9 x 2.1mm Silver Oxide Cell SG11 x 1............ £0.55
7.9 x 2.1mm Silver Oxide Cell SG11 10 pack.... £4.95
7.9 x 2.6mm Silver Oxide Cell SG2 x 1.............. £0.55
7.9 x 2.6mm Silver Oxide Cell SG2 10 pack...... £4.95
6.8 x 2.1mm Silver Oxide Cells SG1 x 1............ £0.55
6.8 x 2.1mm Silver Oxide Cells SG1 10 pack..... £4.95
5.8 x 1.65mm Silver Oxide Cell SR62 x 1.......... £1.90
5.8 x 2.15mm Silver Oxide Cell V379(SR63) x 1 £0.99
5.8 x 2.7mm Silver Oxide Cell V319 (SR64) x 1. £1.99
6.8 x 1.65mm Silver Oxide Cell SR65 x 1.......... £1.45
6.8 x 2.6mm Silver Oxide Cell V377 (SR66) x 1. £0.99
7.9 x 1.65mm Silver Oxide Cell SR67 x 1.......... £1.99
9.5 x 1.65mm Silver Oxide Cell SR68 x 1.......... £1.99
9.5 x 2.1mm Silver Oxide Cells SG6 X1............... £0.60
9.5 x 2.1mm Silver Oxide Cells SG6 10 pack....... £5.40
5.8 x 2.1mm Silver Oxide Cell SG521 x 1............ £0.95
5.8 x 2.1mm Silver Oxide Cell SG521 10 pack.... £8.55
T E L . 0 1 2 4 3 8 4 2 424
CODE
500-758
500-759
500-291
500-292
500-050
500-055
500-060
500-065
500-070
500-072
500-296
Dims (mm)
Dia Ht
Type
Weight
11.6 10.8 CR1/3N
0.0g
10.0 2.5 CR1025
0.0g
12.5 2.0 CR1220
0.9g
16.0 1.6 CR1616 1.2g
16.0 2.0 CR1620
1.2g
20.0 1.6 CR2016
1.7g
20.0 2.5 CR2025
2.5g
20.0 3.2 CR2032
3.0g
24.5 3.0 CR2430
4.0g
24.5 5.0 CR2450
7.0g
24.0 7.7 CR2477
8.0g
Volt
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
Nominal
Capacity PRICE
160mAh
£7.99
30mAh
£1.99
35mAh
£1.99
50mAh
£1.99
70mAh
£1.99
75mAh
£1.99
130mAh
£1.99
200mAh
£1.99
260mAh
£1.99
£2.50
610mAh
550mAh
£4.99
PCB MOUNTED COIN CELLS
LITHIUM COIN CELLS PCB MOUNTED non-rechargeable 3v
coin cell. Horizontal and verticalPCB mounted. Ideally suited to
memory backup applications.
CODE
01-0462
01-0470
01-0458
01-1475
-
TYPE
PRICE
Varta Lithium PCB Coin Cell CR2032 Horizontal. £2.99
Varta Lithium PCB Coin Cell CR2430 Horizontal. £2.99
Varta Lithium PCB Coin Cell CR2025 Vertical..... £1.99
Varta Lithium PCB Coin Cell CR2430 Vertical..... £2.99
FA X . 01243 842525
SQUIRES MODEL & CRAFT TOOLS
COIN CELL HOLDERS
COIN CELL CONTACT a nickel plated spring steel positive contact clip to retain and connect coin cells to printed circuit boards.
Spring tension assures low contact resistance for reliable connection. The contact is marked
with a “+” enabling easy cell
replacement. Contact length
21.4mm
CODE
500-090
TYPE
PRICE
Coin Cell Contact.................................................. £0.29
COIN CELL RETAINER CONTACTS a range of economical contacts for easy and quick battery installation and replacement. Ideal
for memory back up. Available in surface (SMT) and through hole
mount (THM), for cell diameters from 12 to 24mm. Negative battery connection is achieved by the battery contacting directly to the
PCB track. Sold individually.
Technical Specification:CODE
cell diaMounting Cell Types
500-575
12mm SMT
CR1216, CR1220, CR1225
01-0050
16mm SMT
BR1616, CR1612, CR1616
CR1620, CR1632
01-0052
16mm THM
BR1616, CR1612, CR1616
CR1620, CR1632
500-585
20mm SMT
CR2016, CR2020, CR2025,CR2032
500-590
20mm THM
CR2016, CR2020, CR2025,CR2032
500-610
24mm THM
CR2430, DL2430
CODE
500-575
01-0050
01-0052
500-585
500-590
500-610
TYPE
PRICE
Coin Cell Retainer 12mm SMT............................. £1.15
Coin Cell Retainer 16mm SMT............................. £1.25
Coin Cell Retainer 16mm THM............................. £1.20
Coin Cell Retainer 20mm SMT............................. £1.20
Coin Cell Retainer 20mm THM............................. £1.20
Coin Cell Retainer 24mm THM............................. £1.25
COIN CELL HOLDERS a range of PCB mounting coin cell holders
for use on equipment where battery replacement may be necessary. Untagged coin cells can be inserted into the holders and held
in position by the positive contact, which ensures the cell makes a
good connection with the negative terminal in the base of the holder. The holder is moulded in black PBT, the contacts are tin plated
phosphor bronze. Available to suit 20mm diameter (CR2032 type)
or 24mm diameter (CR2430 type) coin cells.
Technical Specification:A
B
C
D
E
Max cell diameter
Minimum cell thickness
CODE
01-0036
500-315
01-0038
500-320
1225
13mm
15mm
4.0mm
5.5mm
8.2mm
12mm
2mm
2032 type
22.6mm
27.3mm
5.1mm
7.6mm
8.4mm
20mm
2325 type
22.9mm
29mm
5.3mm
6.6mm
7.3mm
23mm
Technical Specification:cell dia (mm) no. of cells
12
1
12
2
16
1
20
1
20
2
24
1
24
2
CODE
500-325
500-330
500-335
01-0040
500-340
500-345
01-0042
01-0044
PRICE
£0.99
£0.99
£0.99
£0.99
A
15.1
15.1
19.1
20.21
27.8
25
25
B
19.1
19.1
22.8
13.03
31.0
13.03
18
C
3.8
6.4
3.8
4.9
7.9
4.9
7.9
D
6.4
8.9
6.4
8.5
10.5
8.5
11.9
E
7.1
9.7
7.9
7.5
11.5
7.5
10.6
TYPE
PRICE
Coin Cell Holder 12mm Single ............................ £2.65
Coin Cell Holder 12mm Dual................................ £2.99
Coin Cell Holder 16mm Single............................. £2.65
Coin Cell Holder 20mm Single............................. £2.85
Coin Cell Holder 20mm Dual................................ £2.99
Coin Cell Holder 23mm Single............................. £2.65
Coin Cell Holder 24mm Single............................. £2.75
Coin Cell Holder 24mm Dual................................ £2.99
VERTICAL COIN CELL HOLDER A space saving battery holder
to accept a single 20mm coin cell e.g. CR2016, CR2025. The battery is installed from the top with contacts that are polarised to
ensure proper continuity and circuit protection. Additional PCB
clips are included to improve stability. Moulded from PBT with tin
over nickel plate contacts. Temperature range -50° to +145°C.
Suitable for wave soldering.
CODE
500-273
TYPE
PRICE
20mm Single Vertical Holder................................ £2.55
PCB BUTTON CELL HOLDER holds button cells securely to the
PCB. Retains 736 button cell. Low profile and stable mount legs
for increased strength.
CODE
01-0077
2430 type
27.7mm
30.4mm
4.7mm
7.2mm
8.3mm
24mm
TYPE
Coin Cell Holder 1225 Style.................................
Coin Cell Holder 2032 Style.................................
Coin Cell Holder 2325 Style.................................
Coin Cell Holder 2430 Style.................................
COIN CELL HOLDERS a range of high quality PCB mounting coin
cell holders. The cells are held in position by the positive contact,
which ensures the cell makes a good connection with the negative
contact in the base of the holder. Available to suit 12, 16, 20mm
diameter cells. Available to suit 12,16,20 and 23mm diameter
cells. The 12mm type and a 20mm type holder for 2 cells, giving
6V power are also available.
TYPE
PRICE
PCB Button Cell Holer.......................................... £0.30
POST FREE DELIVERY ON ALL ORDERS
WITHIN THE UNITED KINGDOM
MINIMUM ORDER VALUE £15.00
You may mix your order from
ANY of our catalogues
E -m a il: sa [email protected] s t ool s . c om - w w w. s q u i re s t ool s . c om
371
SQUIRES MODEL & CRAFT TOOLS
ZINC CHLORIDE BATTERIES
SUPER ALKALINE LR1 1.5V BATTERIES a miniature 1.5V
longlife alkaline battery commonly used in remote controls and
photographic equipment. Dimensions 28.5 x 10mm diameter.
Supplied in packs of 2.
ZINC CHLORIDE BATTERIES a range of non-rechargeable zinc
chloride batteries, suitable for heavier duty high drain applications.
These batteries are totally mercury free.
CODE
501-190
TYPE
PRICE
GP Super Alkaline LR1/N 1.5V Battery x 2.......... £1.99
MINIATURE ALKALINE BATTERIES miniature alkaline batteries
as used in many cameras, remote control
alarm keyfobs, test equipment, lighters etc.
CODE
ZCB024
ZCB027
ZCB029
ZCB031
ZCB033
ZCB035
Technical Specification
Type
Voltage Dia Length Weight
GP11A
6V
10.3 16.5 4.0g
GP27A
12V
7.7 28.0 4.4g
TYPE
PRICE
Zinc Chloride Battery AAA 1.5V - Pack of 4......... £1.35
Zinc Chloride Battery AA 1.5V - Pack of 4............ £1.35
Zinc Chloride Battery C 1.5V - Pack of 2.............. £1.45
Zinc Chloride Battery D 1.5V - Pack of 2.............. £1.85
Zinc Chloride Battery PP3 9V - Single.................. £1.25
Zinc Chloride Battery 4.5V 312G/3R12 - Single... £1.75
CODE
500-702
500-704
TYPE
PRICE
Mini Alkaline Battery GP11A 6V........................... £1.65
Mini Alkaline Battery GP27A 12V......................... £1.90
12V ALKALINE BATTERY a miniature 12V alkaline battery used
extensively in miniature instruments, lighters and remote control
systems. Dimensions 28.5 x 10mm
diameter. Equivalent to GP23A.
ALKALINE BATTERIES
GP SUPER ALKALINE BATTERIES a range of non-rechargeable
alkaline batteries, suitable for high current applications over a
longer period. These batteries are totally mercury free.
CODE
L1028
500-028
TYPE
PRICE
12V Alkaline Battery............................................. £0.90
12V Alkaline Battery Pack of 5............................. £3.99
PHOTOGRAPHIC/ INSTRUMENT BATTERIES
CODE
501-191
501-182
501-183
501-180
501-008
501-009
501-184
501-186
501-188
GP ALKALINE CELL LR9/PX625A specially used in photographic
applications and car remote controls. A high quality cell giving
longlife and constant voltage.
Type LR9/PX625A, 1.5 volt,
dimensions 5.95 x 15.6mm.
Sold individually.
TYPE
PRICE
Super Alkaline Battery AAAA 1.5V - Pack of 2..... £2.25
Super Alkaline Battery AAA 1.5V - Pack of 4....... £1.85
Super Alkaline Battery AAA 1.5V - Pack of 8....... £3.50
Super Alkaline Battery AA 1.5V - Pack of 4.......... £1.85
Super Alkaline Battery AA 1.5V - Pack of 8.......... £3.50
Super Alkaline Battery AA 1.5V - Pack of 12........ £5.99
Super Alkaline Battery C 1.5V - Pack of 2............ £2.99
Super Alkaline Battery D 1.5V - Pack of 2............ £3.45
Super Alkaline Battery PP3 9V - Single................ £2.25
CODE
501-204
TYPE
PRICE
GP Alkaline Cell LR9/PX625A - 1.5V................... £1.49
GP ALKALINE CELL 4LR44 specially used in photographic applications, a high quality cell giving longlife and constant voltage.
Type 4LR44, 6 volt, dimensions 25.2 x 13mm. Sold individually.
DURACELL ALKALINE BATTERIES a range of long life nonrechargeable alkaline batteries. The cells are particularly suitable
for high drain applications with continuous heavy loads. They
have a shelf life up to 5 years and no added mercury or cadmium.
CODE
501-202
TYPE
PRICE
GP Alkaline Cell 4LR44 - 6V................................ £1.90
MULTIMETER/PHOTOGRAPHIC BATTERIES a range of Alkaline
15V batteries as used in photographic applications and the popular
AVO 8 multimeter. Early AVO 8’s use
the BLR12 while later models e.g.
model 8 MK7 use the BLR154 type.
CODE
500-840
500-841
500-842
500-843
500-844
500-845
500-846
372
Technical Specification
Type
Voltage
BLR121
15
BLR122
22.5
BLR154
15
TYPE
PRICE
Duracell Alkaline Batteries AAA x4....................... £3.99
Duracell Alkaline Batteries AA x2......................... £2.10
Duracell Alkaline Batteries AA x4......................... £3.99
Duracell Alkaline Batteries C x2........................... £3.25
Duracell Alkaline Batteries D x2........................... £3.45
Duracell Alkaline Batteries D x4........................... £4.99
Duracell Alkaline Battery PP3 x1.......................... £3.25
T E L . 0 1 2 4 3 8 4 2 424
CODE
500-217
500-218
500-219
-
Dims (mm)
27 x 16 x 37
27 x 16x 50
15 dia x 34
Weight(g)
16
23.6
15
TYPE
Multimeter/Photographic Battery BLR121............
Multimeter/Photographic Battery BLR122............
Multimeter/Photographic Battery BLR154............
FA X . 01243 842525
PRICE
£9.99
£12.99
£10.99
SQUIRES MODEL & CRAFT TOOLS
PHOTOGRAPHIC/INSTRUMENT BATTERIES a range of non
rechargeable lithium manganese batteries suitable for use in cameras, electronic equipment and memory back-up applications.
Technical Specification
Varta
Nominal
Type
Voltage
2CR5
6V
CR123A
3V
CR2
3V
CR-P2
6V
CR-V3
3V
CODE
500-221
500-223
500-224
500-226
01-0756
Nominal
Capacity
1.5Ah
1.3Ah
800mAh
1.3Ah
1.3Ah
Approx
Dimensions(mm)
45 x 34 x 17
34.4 x 17 dia
27.0 x 15.6 dia
35.8 x 34.8 x 19.3
52.0 x 29.0 x 14.5
TYPE
PRICE
Photographic/Instrument Battery 2CR5................ £10.99
Photographic/Instrument Battery CR123A........... £4.99
Photographic/Instrument Battery CR2.................. £4.65
Photographic/Instrument Battery CR-P2.............. £9.85
Photographic/Instrument Battery CR-V3.............. £12.90
GP® POWERCELL BATTERY GP908 a heavy duty carbon zinc
battery that provides an economical and
reliable power source for general battery
operated devices. Suitable for lanterns,
toys and clocks. GP® Powercell Battery,
GP908 (PJ996, 4R25), 6V.
Dims 66 x 66 x 111mm.
CODE
01-0041
TYPE
PRICE
GP Powercell GP908 6V Cell............................... £4.99
GP POWERCELL BATTERY 9V PP3 a heavy duty carbon zinc
batteries that provide an economical and
reliable power source for general battery
operated devices. Suitable for lanterns,
toys and clocks. Sold individually.
Specification
Type PP9 Voltage 9V
CODE
502-044
DIGITAL CAMERA BATTERIES
TYPE
PRICE
GP Powercell Battery 9V - PP9............................ £5.99
LiPo MONITOR
DIGI 1 NICKEL ZINC BATTERY a non rechargeable nickel zinc
battery. Lasts up to 3 times as long as standard alkaline batteries.
Ideal for digital cameras etc. Supplied in packs of 4.
LiPo MONITOR used to test the state of a 3 cell or 4 cell LiPo battery pack.
CODE
01-1920
CODE
501-055
500-056
TYPE
PRICE
Digi 1 Nickel ZincBatteries AAx4.......................... £3.15
LITHIUM PP3 BATTERY
GP® LITHIUM BATTERY PP3 a 9V PP3 (6LR61) lithium battery
for super high performance. Suitable for
various applications. Extra long life.
Type CRV9,
Voltage 9V
Dimensions 50 x 26 x 17mm
CODE
01-0331
TYPE
PRICE
GP Lithium Battery PP3 (6LR61) 9V.................... £10.99
TYPE
PRICE
LiPo Battery Monitor for 3 Cells............................ £10.99
LiPo Battery Monitor for 4 Cells............................ £10.99
LiPo RECEIVER PACK MONITOR
LiPo RECEIVER PACK MONITOR used to test the state of a
receiver monitior LiPo battery pack.
CODE
501-057
TYPE
PRICE
LiPo Receiver Pack Monitor................................. £11.99
HEAVY DUTY ZINC CARBON BATTERIES
HEAVY DUTY PJ996 BATTERY a heavy duty zinc-carbon PJ996
6V lantern battery with two coiled
spring connectors. This battery has
high capacity output and is ideally
suited to ‘bulb and switch’ work
in educational environments.
Dims 67 x 67 x 102mm.
Sold individually.
CODE
500-125
TYPE
PRICE
Heavy Duty Battery PJ996 x 1.............................. £3.50
POST FREE DELIVERY ON ALL ORDERS
WITHIN THE UNITED KINGDOM
MINIMUM ORDER VALUE £15.00
You may mix your order from ANY of our catalogues
PRODUCT CODES
PLEASE NOTE
IT IS VERY IMPORTANT
TO USE THE CORRECT PRODUCT CODE
FOR THE ITEMS YOU WISH TO ORDER
IT IS VITAL TO INCLUDE
THE PUNCTUATION IN THE CODE
AND TO FORMAT THE CODE
AS SHOWN IN THE CATALOGUE
POST FREE DELIVERY ON ALL ORDERS
E -m a il: sa [email protected] s t ool s . c om - w w w. s q u i re s t ool s . c om
373
SQUIRES MODEL & CRAFT TOOLS
NI-MH BATTERIES
GP PROFESSIONAL SUB C NiMH RECHARGEABLE BATTERY
a range of rechargeable speciality batteries for use in remote controlled Pro Racing Cars, Boats and Planes. Available in high
capacity 3300mAh (while stocks last), 4300mAh capacities. Sold
individually.
The new generation of rechargeable cells. Nickel Metal Hydride or
Ni-MH cells do not contain any toxic or or hazardous materials
such as cadmium, mercury, lead or lithium. They can be charged
many times, a service life of 500 to 1000 charge/discharge cycles
can be expected. Capacities are higher than Ni-cad cells of equivalent size and are not subject to the ‘memory’ effect that can
reduce the capacity of Nicad cells. They can be disposed of safely
at the end of their life.
Specification
Dims - 23mmØ x 43mm
Nominal voltage - 1.2V
CODE
500-797
500-794
NICKEL METAL HYDRIDE RECHARGEABLE AAA CELLS a
high quality Ni-MH AAA cell. Capacity 600mAh, Standard charge
14 hours @ 60mA, Fast charge 5 hours @ 120mA. Supplied individually.
CODE
500-164
500-602
NiMH MEMORY BACKUP BATTERIES for use where batteries
can be charged while equipment is in operation. PCB mounting.
TYPE
PRICE
GP NiMH AAA Cell 600mAh x 1........................... £1.45
GP NiMH AAA Cell 950mAh x 1........................... £2.50
CODE
500-459
500-460
NICKEL METAL HYDRIDE RECHARGEABLE AA CELLS a
range high quality Ni-MH AA cells. Capacity 1300mAh, Standard
charge 16 hours @ 130mA, Fast charge 5 hours @ 325mA.
Capacity 2500mAh, Standard charge 16 hours @ 190mA, Fast
charge 5 hours @ 400mA. Supplied individually.
CODE
501-198
501-199
501-201
TYPE
GP NiMH AA Cell 1300mAh x 1...........................
GP NiMH AA Cell 1800mAh x 1...........................
GP NiMH AA Cell 2500mAh x 1...........................
PRICE
£1.90
£2.90
£4.99
CODE
01-0128
01-0132
01-0120
01-0126
TYPE
PRICE
GP NiMH C Cell 2200mAh Battery x 1................. £5.99
GP NiMH C Cell 3500mAh Battery x 1................. £8.99
TYPE
PRICE
GP Nimh D Cell 2200mAh Battery x 1.................. £6.99
CODE
01-0136
01-0134
NICKEL METAL HYDRIDE RECHARGEABLE PP3 CELL a high
quality Ni-MH PP3 cell. Capacity 1000mAh, Standard charge 14
hours @ 17mA.
CODE
01-0171
374
TYPE
PRICE
Mercury NiMH AAA Cells 700mA Pack of 4......... £3.99
Mercury NiMH AAA Cells 1100mA Pack of 4....... £4.99
Mercury NiMH AA Cells 1300mA Pack of 4......... £4.99
Mercury NiMH AA Cells 2800mA Pack of 4......... £9.99
MERCURY GREEN NiMH RECHARGEABLE BATTERIES a
range of new generation nickel metal hydride rechargeable batteries equipped with innovative battery technology, is the all-in-one
solution to the modern consumer needs of convenience, economy
and environmental protection. Ready for instant used upon purchase, good for all applications. Up to 1000 times use and retains
its charged capacity up to 80% after 6 months or 70% capacity
after 12 months of storage. AAA and AA types available in packs
of 4.
NICKEL METAL HYDRIDE RECHARGEABLE D CELLS a high
quality Ni-MH D cell. Capacity 2200mAh, Standard charge 14
hours @ 220mA, Fast charge 5 hours @ 550mA. Supplied individually.
CODE
500-593
TYPE
PRICE
NiMH Memory Backup Battery 3.6v 12mah......... £4.99
NiMH Memory Backup Battery 3.6v 80mah......... £4.99
MERCURY NiMH RECHARGEABLE BATTERIES a range of AAA
and AA nickel metal hydride rechargeable batteries are especially
designed to meet today's consumer needs, suitable for high drain
applications such as digital cameras, MP3 players and other
portable devices. Ultra high capacity up to 2800mA for AA size
(1100mA for AAA size). Excellent high drain performance. Fast
charge capability and up to 1000 recharge cycles. No memory
effect.
NICKEL METAL HYDRIDE RECHARGEABLE C CELLS a high
quality Ni-MH C cell. Capacity 2200mAh, Standard charge 14
hours @ 220mA, Fast charge 5 hours @ 550mA. Supplied individually.
CODE
500-591
500-592
TYPE
PRICE
GP Professional NiMH Sub C Cell 3300mAh....... £11.99
GP Professional NiMH Sub C Cell 4300mAh....... £15.99
PRODUCT CODES
PLEASE NOTE - IT IS VERY IMPORTANT TO USE
THE CORRECT PRODUCT CODE
FOR THE ITEMS YOU WISH TO ORDER
IT IS VITAL TO INCLUDE THE PUNCTUATION
IN THE CODE AND TO FORMAT THE CODE
AS SHOWN IN THE CATALOGUE
TYPE
PRICE
GP Nimh PP3 Cell 1000mAh Battery x 1............. £9.99
T E L . 0 1 2 4 3 8 4 2 424
TYPE
PRICE
Mercury Green NiMH AAA Cells 900mA 4 Pack.. £6.99
Mercury Green NiMH AA Cells 2200mA 4 Pack.. £8.99
-
FA X . 01243 842525
SQUIRES MODEL & CRAFT TOOLS
INDUSTRIAL SIZE NICKEL METAL HYDRIDE BATTERIES a
range of industrial size nickel metal hydride rechargeable cells.
The tagged cells are ideal for making up battery packs, the plain
cells do not have a raised pip.
Cell
Capacity Dimensions mm
size
(mAh)
Dia. x Height (mm) Weight (g)
AAAA
500
8.4 x 66.0
10.5
AAA
700
8.4 x 66.0
13
1/3AA
250
14.5 x 16.6
7
2/3AA
600
14.5 x 28.7
13
AA
1300
14.4 x 48.2
25
AA
1700
14.5 x 49.2
27
2/3AF
1000
17.0 x 28.7
22
4/5AF
1800
17.0 x 43.0
32
AF
2500
17.0 x 50.2
39
Sub-C
2200
23.0 x 43.0
55
Sub-C
3000
23.0 x 43.0
61
AAA plain 700
8.4 x 66.0
13
AA plain
1700
14.5 x 49.2
27
D plain
7000
34.2 x 61.5
155
CODE
01-0000
01-0002
01-0004
01-0006
01-0008
01-0010
01-0012
01-0014
01-0016
01-0018
01-0020
01-0022
Std Charge Rate
for 14 hours (mA)
50
70
25
60
130
170
100
180
250
220
300
70
170
700
TYPE
PRICE
GP NiMH AAAA 500mAh Battery x1 Tagged....... £2.25
GP NiMH AAA 700mAh Battery x1 Tagged......... £1.85
GP NiMH AAA 700mAh Battery x1 Plain.............. £1.95
GP NiMH 1/3 AA 250mAh Battery x1 Plain.......... £1.45
GP NiMH AA 1300mAh Battery x1 Tagged......... £2.25
GP NiMH AA 1700mAh Battery x1 Tagged......... £2.99
GP NiMH 2/3AF 1000mAh Battery x1 Tagged..... £2.50
GP NiMH 4/5AF 1800mAh Battery x1 Tagged..... £4.20
GP NiMH AA 1800mAh Battery x1 Plain.............. £2.35
GP NiMH AF 2500mAh Battery x1 Tagged.......... £5.50
GP NiMH Sub-C 2200mAh Battery x1 Tagged.... £5.60
GP NiMH Sub-C 3000mAh Battery x1 Tagged.... £6.90
ReCyko+ NiMH Cells a brand new rechargable battery technology
that combines the benefits of rechargeable and standard Alkaline
batteries. These batteries can be recharged upto 1000 times and
are suitable for all applications from low to high drain. The
ReCyko+ batteries have a much greater charge retention capability
than ordinary rechargeable batteries - after 6 months a ReCyko+
battery will still retain 90% of its charge and after a year 85% will
still remain - making them ideal for devices that get intermitant use.
GP ReCyko + NiMH BATTERY CHARGER a compact plug-in
charger complete with 4 x AA ReCyko+ rechargeable NiMH batteries. Charge batteries in pairs, both AA and AAA can be charge at
the same time. Green LED charging
indicators. Only charge NiMH type
rechargeable batteries.
Specification
Power supply
230Vac, 50Hz, 10W
Output voltage 2.8Vdc
Charging current
180mA (AA)/80mA (AAA)
Charging Time Approx.
14 hrs (AA/2050mAh).
12 hrs (AAA/820mAh)
CODE
500-852
500-858
500-855
NiMH ReCyko RECHARGEABLE AA CELLS WITH C & D CONVERTERS there is now no need to buy a range of different
rechargeable batteries, with GP's battery converter you can
change your regular AA batteries into either C or D sizes. Supplied with two AA (2100mAh) NiMH ReCyko batteries. Fast and
convenient use of C and D cells, convenient charging on AA
chargers and reduces battery types stored for consumer use.
Ideal for use with digital cameras, MP3 players, torches, portable
radios, toys and many more products. Supplied with 2 x AA cells
and 2 each C & D Coverters.
Dimensions
85 x 125 x 40mm
Capacity 2100mAh
Voltage 1.2V
Weight 14g
CODE
01-0689
TYPE
PRICE
GP Recyko AA Cells with C & D Converters x2... £10.99
CYCLON CELLS
CYCLON CELLS a range of high performance 2V cells and 6v
monoblocs. Suitable for harsh environments. Fast charging. 15
years design life.
CODE
01-0506
01-0507
01-0508
01-0510
01-5110
01-0512
01-0513
TYPE
PRICE
Lead Acid Battery 2v 2.5ah D Cell........................ £10.99
Lead Acid Battery 2v 4.5ah TD Cell..................... £12.99
Lead Acid Battery 2v 5ah X Cell........................... £15.99
Lead Acid Battery 2v 25.ah BC Cell..................... £49.99
Lead Acid Battery 6v 2.5ah Monobloc.................. £19.99
Lead Acid Battery 6v 5ah Monobloc..................... £25.99
Lead Acid Battery 6v 8ah Monobloc..................... £35.99
PRODUCT CODES
PLEASE NOTE
IT IS VERY IMPORTANT
TO USE THE CORRECT PRODUCT CODE
FOR THE ITEMS YOU WISH TO ORDER
IT IS VITAL TO INCLUDE
THE PUNCTUATION IN THE CODE
AND TO FORMAT THE CODE
AS SHOWN IN THE CATALOGUE
POST FREE DELIVERY ON ALL ORDERS
WITHIN THE UNITED KINGDOM
MINIMUM ORDER VALUE £15.00
TYPE
PRICE
GP ReCyko+ NiMH Battery Charger + 4 AA Cells. £29.99
GP ReCyko+ AAA Cells Pack of 4......................... £10.99
GP ReCyko+ AA Cells Pack of 4........................... £15.99
You may mix your order from
ANY of our catalogues
E -m a il: sa [email protected] s t ool s . c om - w w w. s q u i re s t ool s . c om
375
SQUIRES MODEL & CRAFT TOOLS
BATTERY CHARGERS
UNIVERSAL BATTERY CHARGER WITH DISCHARGER a universal charger suitable for charging Ni-cad cells and Nickel Metal
Hydride (Ni-Mh) cells. It has a discharge facility which helps to
eliminate the memory effect of Ni-cads. It also has a test facility
for checking battery condition. It will charge 1 - 4 cells of AAA, AA,
C, D and 1 PP3, individually or in a group, the charger automatically selects the correct charge rate for the cells inserted. Charging
times are dependant on cell capacity. Ni-Cads:- AAA 2 - 5hrs, AA
5 - 8hrs, C 10 - 20hrs, D 12 - 25hr, PP3 5 - 11hrs. Ni-Mh:- AAA 6
- 10hrs, AA 10 - 20hrs, C 15 - 25hrs, D 20 - 30hr, PP3 8 - 15hrs.
4-WAY BATTERY CHARGER a compact, plug-in battery charger
that can charge any standard AA or AAA Ni-Cd/Ni-MH re-chargeable batteries. It can charge 2
or 4 batteries at one time.
Batteries not included.
Specification
Input.........230Vac 50Hz
Output.................200mA
Dims...102 x 48 x 50mm
CODE
01-0183
TYPE
PRICE
4-Way Battery Charger......................................... £4.99
4-WAY ENERGY EFFICIENT BATTERY CHARGER this compact, energy efficient battery charger can charge any standard AA
or AAA Ni-Cd/Ni-MH re-chargeable batteries. It also features a
USB output socket to charge devices such as iPods, PSPs and
mobile phones etc. with an output upto 700mA for minimum
charge time. It has a compact design and uses 25% less power
compared to standard chargers. The materials used and manufacturing process are more environmentally friendly. It can charge 2
or 4 batteries at one time.
Batteries not included.
CODE
501-150
GP® POWER BANK UNIVERSAL NiMH BATTERY CHARGER a
stylish ultra high capacity charger for NiMH D/C/AA/AAA/9V battery types. The charger has automatic charging current selection
with 2 Charging channels for AA/AAA/C/D batteries and 1 for 9V
batteries. LED indicate charging channels. Charges 2 or 4 pcs
AA/AAA/C/D and 1-2pcs PP3 (9V). Supplied with plug-in AC
adaptor Charging time 5 - 21hours dependent on capacity. Dimensions 178 x 97 x 58mm. Batteries not supplied.
Specification
USB Output.....700mA (Max)
Output..........AAA/AA 150mA
Input../100-240Vac, 50/60Hz
Dims..........108 x 50 x 48mm
CODE
01-0184
TYPE
PRICE
4-Way Energy Efficient Battery Charger............... £8.99
4-WAY DESKTOP FAST BATTERY CHARGER this 4-way desktop, fast battery charger can charge any standard AA or AAA NiCd/Ni-MH re-chargeable batteries. It features an LCD display to
indicate the charge status of each battery. This desktop unit only
takes 1-2 hours to completely charge the batteries and comes
complete with power supply. It can charge 1-4 batteries at a time.
Batteries not included.
Specification
Input......100-240Vac 50/60Hz
Charging current AA....800mA
Charging current AAA.300mA
Dims............130 x 75 x 35mm
Charger weight:
109g
Power supply weight: 75g
CODE
01-0186
CODE
501-618
TYPE
PRICE
4-Way Desktop Fast Battery Charger................... £25.99
Power supply.................................230Vac, 50Hz
Charging current.......................................700mA
Charging time:Prismatic x 1..2 hours (1450mAh)
Prismatic x 2..4 hours (1450mAh)
AA x 1............ 2 hours (1600mAh)
AA x 2............ 4 hours (1600mAh)
CODE
TYPE
PRICE
501-100 GP Aud P/Bank Charger for NiMH Prismatic/AA.. £36.99
You may mix your order from
ANY of our catalogues
T E L . 0 1 2 4 3 8 4 2 424
Power supply................................12Vdc, 800mA
Output voltage...................2 x 2.8V and 2 x 9Vdc
Charging currents..........AAA 120mA, AA 260mA,
C 440mA, D 560mA, PP3 14mA.
TYPE
PRICE
GP Power Bank Universal NiCd/NiMH Charger... £27.99
GP® AUDIO POWER BANK NiMH PRISMATIC/AA CHARGER a
plug in ultra high capacity charger
for NiMH Prismatic or AA type
rechargeable batteries. Charges 1
to 2 Prismatic or AA cells. Minus
delta voltage cutoff (-dV) with
safety timer and 2 LED Indicators.
Supplied with 2 x 1450mAh
Prismatic batteries.
**Available while
stocks last.**
POST FREE DELIVERY ON ALL ORDERS
WITHIN THE UNITED KINGDOM
MINIMUM ORDER VALUE £15.00
376
TYPE
PRICE
Uni Ni-Cd/Ni-Mh Battery Charger with Discharge £11.99
-
FA X . 01243 842525
SQUIRES MODEL & CRAFT TOOLS
USB BATTERY CHARGER a small handy device that connects
into any USB 2.0 port on a PC/Laptop. It
charges 2x AA or AAA NiMH batteries, 1 to
2 hours charging time.Auto cut-off safety
control to prevent overcharging. Foldable
USB plug, dual colour LED Compact and
portable,Supplied with 2 x AA (NiMH)
2300mAh batteries
CODE
01-0580
TYPE
PRICE
USB Battery Charger............................................ £19.99
MOBILE PHONE CHARGERS
UNIVERSAL 10-IN-1 MOBILE PHONE IN CAR CHARGER KIT a
universal in-car charger kit with 9 connector plugs, compatible with
most mobile phones. Lightweight and compact, short-circuit and
reverse current protection
Input voltage
12 - 24Vdc
Output current
600mA max.
Dims 90 x
30 x 46mm
CODE
01-1034
NiMH RACE PACKS
GP NiMH RACING PACKS a range of 7.2V Nickel Metal Hydride
racing packs with 3000mAH or 3700mAh capacities. Note to
charge these
packs a charger
suitable for NiMH
cells is required
listed below.
CODE
500-031
500-199
501-014
501-016
TYPE
PRICE
GP NiMH Battery Race Pack 3000mAh............... £24.99
GP NiMH Battery Race Pack 3700mAh............... £39.99
Ansmann Over Night Charger 7.2V AC14............ £9.99
Ansmann Fast Charger 7.2V AC30...................... £29.99
DELTA PEAK SMART CHARGER
DELTA PEAK SMART CHARGER a universal smart charger for
use with Ni-Cd and Mi-Mh battery pack of 4.8V - 10.8V with capacities greater than 100mAh. Delta peak charging technology
detects the slight temperature change at the end of charging and
will switch the charge current off. Charge time 1.5 hours for
2000mAh packs, 3 hours for 3000mAh packs.
TYPE
PRICE
Universal 10-in-1 In-Car Phone Charger Kit......... £9.99
UNIVERSAL 10-IN-1 MOBILE PHONE CHARGER KIT a universal mains powered charger kit with 9 connector plugs, compatible
with most mobile phones. Lightweight and compact, short-circuit
and reverse current protection
Input voltage
100 - 240Vac
Output
3 - 12Vdc @
650mA max.
Dims 55 x
50 x 70mm
CODE
01-1035
CODE
501-015
TYPE
PRICE
Delta Peak Smart Charger Ni-Mh/Ni-Cd............... £25.99
BATTERY PACK CONNECTORS
TYPE
PRICE
Universal 10-in-1 In-Car Phone Charger Kit......... £12.99
ENERGY EFFICIENT MOBILE CHARGER KIT 2000mA a compact mobile charger kit with power supply includes 4 detachable
input plugs making it usable in most countries around the world. Its
output of [email protected] and the included 4-in-1 universal
charging cable makes it ideal for charging most updated mobiles
(supplied adaptors: Micro USB, Mini USB, iPod, nokia, female
USB connections). Will charge up to 4 units at the same time.
Input voltage
100-240Vac, 50/60Hz
Output current max.
2000mA
Output voltage 5.2Vdc
Dims 75 x 50 x 42mm
RADIO CONTROLLED BATTERY PLUG AND SOCKET Tamiya
style connectors ideal for radio controlled models. Pre-wired with
easy fit crimp connectors.
Available either male
or female
CODE
01-3970
01-3972
TYPE
PRICE
Radio Controlled Plug........................................... £2.50
Radio Controlled Socket....................................... £2.50
7.2V PLUG & SOCKET an un-assembled 7.2V plug and socket for
connecting battery packs.
CODE
TYPE
PRICE
CON039 7.2V Plug & Socket............................................... £1.99
7.2V PLUG & SOCKET WITH LEADS an assembled 7.2V plug
and socket for connecting to battery
packs. Lead length 240mm approx
(both male and female).
CODE
01-0731
TYPE
PRICE
Energy Efficient Mobile Charger Kit 2000mA....... £22.99
CODE
TYPE
PRICE
CON038 7.2V Plug & Socket with Leads............................ £2.75
E -m a il: sa [email protected] s t ool s . c om - w w w. s q u i re s t ool s . c om
377
SQUIRES MODEL & CRAFT TOOLS
TELEPHONE BATTERY PACKS
MINIATURE BATTERY TESTER a compact hand held universal
battery tester on a key chain. 3 LED's
indicate the battery condition and by
employing a slide mechanism most
sizes of dry cells can be checked,
including AAA, AA, C, D, PP3 and
button cells and some sub-size cells.
CORDLESS PHONE RECHARGEABLE NiMHBATTERY PACK a
rechargeable battery pack for
cordless phones, fitted with
universal connectors to fit
many makes of phone. 3.6V,
capacity 300mAh, dimensions
42 x 30 x 14mm.
CODE
502-193
CODE
01-7021
TYPE
PRICE
NiMH Rechargeable Battery Pack (T157)............ £5.99
UNIVERSAL BATTERY TESTER a handy battery tester with an
easy to read display. The
tester measures the batteries
under load thus indicating
accurately their state.
Suitable for 1.5V, 9V cells
and 1.5V button cells.
CORDLESS TELEPHONE BATTERIES a rechargeable battery
pack with solder tags.
Technical Specification:Order
code Voltage Capacity(mAh)
500-200
3.6
720
CODE
500-200
No of cells
3 x AA
CODE
500-393
Dimensions
W x H x Thickness
43 x 50 x 14mm
TYPE
PRICE
Cordless Phone Battery........................................ £6.99
CODE
TYPE
PRICE
BTBU06 Battery Tester....................................................... £5.99
CORDLESS PHONE BATTERY PACK 2x NiMH cells with universal connector. 2.4V, 170mAh.
Dims:- 16.6 x 21.32 x 10.6mm
CODE
01-0478
UNIVERSAL BATTERY TESTER WITH LCD READOUT a multipurpose battery condition checker with LCD to indicate status.
Tests digital camera batteries: CR123A, CR2, CR-V3, 2CR5 & CRP2. Suitable for AAA, AA, C, D and 9V types, tests 1.5V and 3V
button cells .
TYPE
PRICE
GP NiMH Battery 2.4v 170mAh............................ £8.99
Specification
Power supply
1.5Vdc (1 x AAA)
Dimensions
118 x 88 x 23mm
Weight 100g
CORDLESS PHONE BATTERY PACK NiMH cellsa with universal
connector 2.4V, 270mAh.
Dims:- 22.5 x 20 x 10.5mm.
CODE
500-204
CODE
01-0481
TYPE
PRICE
Universal Battery Tester....................................... £3.99
BATTERY TESTER a compact battery tester capable of testing
most of the popular dry cell types under actual load conditions.
The easy to read meter will
indicate the condition of the cell
at a glance. Tests:- PP3 (9V)
cells, AAA, AA, C and D (1.5V)
cells, 4SR44 and 4LR44 (6V)
cells and 1.5V button cells.
It also tests the equivalent
Ni-cad types.
TYPE
PRICE
Cordless Telephone Battery 3 x AA..................... £7.50
CORDLESS PHONE BATTERY PACK 3x NiMH coin cells. 3.6v
320 mAh. Dims:Width 47mm,
Thickness 9mm.
CODE
502-406
TYPE
PRICE
Pocket Battery Tester........................................... £3.50
TYPE
PRICE
GP NiMH Battery 2.4v 270mAh............................ £7.99
TYPE
PRICE
Universal Batter Tester with LCD Readout........... £12.99
BATTERY HOLDERS
1 X N BATTERY HOLDER solder tag terminals. L35 x W13 x
D12.5mm.
BATTERY TESTERS
BATTERY TESTER a handy battery tester suitable for AAA, AA,
C, D, PP3 and 3R12 size batteries.
Dims 52 x 55 x 22m.
CODE
500-500
TYPE
PRICE
Battery Holder N x 1............................................. £0.35
1 X AAA BATTERY HOLDER solder tag terminals. L50 x W13 x
D12mm.
CODE
72090
378
TYPE
PRICE
Battery Tester 72090............................................ £3.99
T E L . 0 1 2 4 3 8 4 2 424
CODE
500-505
-
TYPE
PRICE
Battery Holder AAA x 1......................................... £0.35
FA X . 01243 842525
SQUIRES MODEL & CRAFT TOOLS
2 X AAA BATTERY HOLDER side by side, solder tag terminals.
L52 x W24 x D15mm.
CODE
TYPE
PRICE
BHAAA2 Battery Holder AAA x2.......................................... £0.40
BATTERY HOLDER 2 X AAA, WIRE LEADS side by side with
wire leads. L35 x W13 x D12.5mm.
CODE
500-464
4 X AA BATTERY HOLDER square. L57 x W30 x D28mm.
CODE
TYPE
PRICE
BHAAS4 Battery Holder AA x4 Square............................... £0.50
4 X AA BATTERY HOLDER 2 x 2. L105 x W24 x D15mm.
TYPE
PRICE
Battery Holder AAA x2 with Wire Leads............... £0.35
4 X AAA BATTERY HOLDER side by side,
solder tag terminals. L52 x W26 x D25mm.
CODE
TYPE
PRICE
BHAAA4 Battery Holder AAA x4.......................................... £0.60
CODE
TYPE
PRICE
BHAAL4 Battery Holder AA x4 Long................................... £0.50
6 X AA BATTERY HOLDER in block. L58 x W44 x D28mm.
1 X AA BATTERY HOLDER solder tag terminals. L57 x W16 x
D16mm.
CODE
500-510
TYPE
PRICE
Battery Holder AA x 1........................................... £0.35
CODE
TYPE
PRICE
BHAA06 Battery Holder AA x6............................................ £0.65
BATTERY HOLDER 1 X AA, WIRE LEADS a 1 x AA battery holder with wire leads. Dimensions
L59, W16.5, D14.5mm.
CHASSIS MOUNT BATTERY BOX 6 X AA an ABS chassis or
panel mounting battery box, for
9V applications where a 9V PP3
battery would have insufficient
capacity. Clip-fits into panel
approx 1mm thick, cut-out of
60 x 94mm. Dims 115 x 66 x
23mm. 150mm wires.
CODE
500-905
TYPE
PRICE
1 x AA Battery Holder with Wire Leads................ £0.35
2 X AA BATTERY HOLDER side by side. L57 x W26 x D17mm.
CODE
500-267
CODE
TYPE
PRICE
BHAA02 Battery Holder AA x2............................................ £0.35
TYPE
PRICE
Chassis Mount Battery Box 6 x AA....................... £1.45
8 X AA BATTERY HOLDER in block. L58 x W59 x D29mm.
BATTERY HOLDER 2 X AA, WIRE LEADS a 2 x AA battery holder side by side with wire leads.
Dimensions L58, W25, D17mm.
CODE
500-907
.
TYPE
PRICE
2 x AA Battery Holder with Wire Leads................ £0.35
3 X AA BATTERY HOLDER side by side.
L57 x W49 x D17mm.
CODE
TYPE
PRICE
BHAA03 Battery Holder AA x3............................................ £0.45
01-0024 Battery Holder AA x3 Solder Tags........................ £0.60
CODE
TYPE
PRICE
BHAA08 Battery Holder AA x8............................................ £0.99
8 X AA BATTERY HOLDER 4 square + 4 square long. L109 x
W32 x D30mm.
CODE
500-515
TYPE
PRICE
Battery Holder AA x8 Long................................... £0.99
4 X AA BATTERY HOLDER side by side. L58 x W60 x D16mm.
CODE
TYPE
PRICE
BHAAF4 Battery Holder AA x4 Flat..................................... £0.50
PRODUCT CODES
PLEASE NOTE - IT IS VERY IMPORTANT
TO USE THE CORRECT PRODUCT CODE
FOR THE ITEMS YOU WISH TO ORDER
E -m a il: sa [email protected] s t ool s . c om - w w w. s q u i re s t ool s . c om
379
SQUIRES MODEL & CRAFT TOOLS
10 X AA BATTERY HOLDER 5 x 2 snap terminals. L59 x W76 x
D30mm.
3 X D BATTERY HOLDER side by side solder tag. L100 x W71 x
D27mm.
CODE
500-000
CODE
01-0030
TYPE
PRICE
Battery Holder AA x10.......................................... £1.35
4 X D BATTERY HOLDER side by side x 2. L132 x W68 x
D30mm.
1 X C BATTERY HOLDER solder tags, L62 x W30 x D22mm.
CODE
01-0028
TYPE
PRICE
Battery Holder D x3.............................................. £0.90
TYPE
PRICE
Battery Holder C x1 Solder Tags.......................... £0.45
CODE
TYPE
PRICE
BHD040 Battery Holder D x4.............................................. £0.99
2 X C BATTERY HOLDER side by side. L54 x W54 x D22mm.
4 X D BATTERY HOLDER solder tag connections, L140 x W71 x
D27mm.
CODE
TYPE
PRICE
BHC002 Battery Holder C x2.............................................. £0.65
CODE
500-247
4 X C BATTERY HOLDER side by side x 2. L106 x W54 x
D23mm.
BATTERY BOXES WITH COVERS a range of black ABS
enclosed AAA and AA size battery boxes with detachable lids.
The lids may be secured with the
small screws provided. Terminated
in red and black stranded 26AWG
wires approx 150mm long. Some
models are fitted with a miniature
on/off switch wired into the
black (negative) wire.
CODE
TYPE
PRICE
BHC004 Battery Holder C x4.............................................. £0.85
6 X C BATTERY HOLDER side by side x 3, solder tag, L160 x
W58 x D25mm.
CODE
500-520
CODE
500-249
500-251
500-253
500-256
500-257
500-259
500-261
500-263
500-264
500-245
500-560
500-266
TYPE
PRICE
Battery Holder C x6.............................................. £1.50
1 X D BATTERY HOLDER solder tag, L69 x W36 x D27mm.
CODE
500-525
TYPE
PRICE
Battery Holder D x4 Solder Tag............................ £1.50
TYPE
PRICE
Battery Box with Cover 2 x AAA with switch......... £1.05
Battery Box with Cover 3 x AAA with switch......... £1.25
Battery Box with Cover 4 x AAA with switch......... £1.65
Battery Box with Cover 2 x AAA .......................... £1.00
Battery Box with Cover 3 x AAA .......................... £1.15
Battery Box with Cover 4 x AAA .......................... £1.25
Battery Box with Cover 2 x AA with switch........... £1.10
Battery Box with Cover 3 x AA with switch........... £1.60
Battery Box with Cover 4 x AA with switch........... £1.65
Battery Box with Cover 2 x AA............................. £1.00
Battery Box with Cover 3 x AA............................. £1.50
Battery Box with Cover 4 x AA............................. £1.55
PCB MOUNTING BATTERY HOLDER 1 x N PCB mounting battery holder for 1 x N cell. Moulded in black thermoplastic and ncorporates PCB pin terminations and clear marking
for battery orientation. Dim 13 x 12.5 x 35mm.
TYPE
PRICE
Battery Holder D x1.............................................. £0.55
2 X D BATTERY HOLDER side by side. L68 x W68 x D30mm.
CODE
500-545
TYPE
PRICE
PCB Mounting Battery Holder 1 x N..................... £0.35
BATTERY HOLDER 1 X N, WIRE LEADS
D12.5mm.
CODE
TYPE
PRICE
BHD020 Battery Holder D x2.............................................. £0.75
380
T E L . 0 1 2 4 3 8 4 2 424
CODE
500-462
-
L35 x W13 x
TYPE
PRICE
Battery Holder N x1 with Wire Leads.................... £0.45
FA X . 01243 842525
SQUIRES MODEL & CRAFT TOOLS
PCB MOUNTING BATTERY HOLDER 1 x AAA a PCB mounting
battery holder for 1 x AAA cell. It is
moulded in black thermoplastic and
incorporates PCB pin terminations and
clear marking for battery orientation.
Dimensions 13 x 12 x 50mm.
CODE
500-215
TYPE
PRICE
PCB Mounting Battery Holder 1 x AAA................ £0.45
PCB MOUNTING BATTERY HOLDER 2 x AAA a PCB mounting
battery holder for 2 x AAA cells. It is
moulded in black thermoplastic and
incorporates PCB pin terminations and
clear marking for battery orientation.
Dimensions 25 x 13 x 53mm.
CODE
500-220
TYPE
PRICE
PCB Mounting Battery Holder 2 x AAA................ £0.50
PCB MOUNTING BATTERY HOLDER 3 X AAA side by side. L40
x W12 x D53mm.
CODE
01-2926
TYPE
PRICE
PCB Battery Holder AAA x3................................. £0.75
PCB MOUNTING BATTERY HOLDER 4 x AAA a PCB mounting
battery holder for 4 x AAA cells. It is moulded in black thermoplastic and incorporates PCB pin
terminations and clear marking
for battery orientation.
Dimensions 50 x 12 x 53mm.
CODE
500-550
TYPE
PRICE
PCB Mounting Battery Holder 4 x AAA................ £0.85
BATTERY HOLDER HALF AA PCB MOUNTING a rectangular
battery holder suitable for 2AA-2P type
batteries. Holds 1 Cell, PCB mount, can
be screwed into position. Open style.
CODE
01-0154
TYPE
PRICE
Battery Holder Half AA PCB Mount...................... £0.35
PCB MOUNTING BATTERY HOLDER 1 x AA a PCB mounting
battery holder for 1 x AA cell. It is
moulded in black thermoplastic and
incorporates PCB pin terminations and
clear marking for battery orientation.
Dimensions 16 x 13 x 57mm.
CODE
500-225
TYPE
PRICE
PCB Mounting Battery Holder 1 x AA................... £0.35
PCB MOUNTING BATTERY HOLDER 3 x AA a PCB mounting
battery holder for 3 x AA cells. It
is moulded in black thermoplastic
and incorporates PCB pin
terminations and clear marking
for battery orientation.
Dimensions 48.5 x 17 x 58mm.
CODE
500-555
TYPE
PRICE
PCB Mounting Battery Holder 3 x AA................... £0.70
PCB MOUNTING BATTERY HOLDER 4 x AA a PCB mounting
battery holder for 4 x AA cells. It
is moulded in black thermoplastic
and incorporates PCB pin
terminations and clear marking
for battery orientation.
Dimensions 62 x 16 x 58mm.
CODE
500-235
TYPE
PRICE
PCB Mounting Battery Holder 4 x AA................... £0.75
PCB MOUNTING BATTERY HOLDER 1 x PP3 a PCB mounting
battery holder for 1 x PP3 cell. It is
moulded in black thermoplastic and
incorporates PCB pin terminations
and clear marking for battery
orientation. Dimensions
31 x 20 x 55mm.
CODE
500-240
TYPE
PRICE
PCB Mounting Battery Holder 1 x PP3................. £0.65
BATTERY HOLDER PP3 WITH FLYING LEADS a 9V battery
holder with 150mm leads. Male/female
snap-in terminals for positive contact
and correct polarity, positive and
negative legends are clearly marked.
Moulded from black thermoplastic to
withstand severe shock and vibration.
Incorporates screw fixing holes.
CODE
01-0162
TYPE
PRICE
Battery Holder PP3 with Flying Leads.................. £0.90
BATTERY HOLDER PP3 ENCLOSED this battery holder has a
slide top for easy access with a firm snap closing action. The
internal battery contacts are connected to two steel nickel plated
contacts with solder lug terminals for
easy and quick connection. Ideal for
projects/backup power applications.
Use with standard PP3 9V battery.
Supplied in black polycarbonate with
steel nickel plated contacts with
solder lug terminals. Dims: 54(L) x
34(W) x 23(D)mm (not including front).
CODE
01-0295
TYPE
PRICE
Battery Holder PP3 Enclosed............................... £2.99
PCB MOUNTING BATTERY HOLDER 2 x AA a PCB mounting
battery holder for 2 x AA cells. It is
moulded in black thermoplastic and
incorporates PCB pin terminations and
clear marking for battery orientation.
Dimensions 32 x 16 x 58mm.
CR123A PCB MOUNT BATTERY HOLDER a rectangular battery
holder suitable for CR123A type batteries.
1 Cell, PCB mount, can be screwed into
position. Open style solder tags,
L50 x W50 x D13mm.
CODE
500-230
CODE
01-0034
TYPE
PRICE
PCB Mounting Battery Holder 2 x AA................... £0.40
TYPE
PRICE
Battery Holder CR123A........................................ £0.50
E -m a il: sa [email protected] s t ool s . c om - w w w. s q u i re s t ool s . c om
381
SQUIRES MODEL & CRAFT TOOLS
BATTERY SNAPS
BATTERY CONTACTS a range of snap-on contacts, ideal for
moulded cases with self contained battery compartments. Single
and dual types are available for single or series battery configurations. The spring tension ensures low contact resistance and
adjusts to variations in battery length. The contacts snap on to
panel edges or lugs from 1.5 to 1.8mm thickness and are retained
in position by barbs. The design incorporates a solder ‘ear’ to facilitate soldering of wire leads. Suitable for A,AA,AAA,AAAA and N
Sizes. For A and AA types a separate single contact is available
with a raised ring to locate with the raised positive ‘pip’. Sold individually.
BATTERY SNAP CONNECTORS for use with PP3 and PP6 batteries and battery holders. 2 types:- standard and moulded version. Colour coded
150mm leads.
CODE
BSN010
BSN020
TYPE
PRICE
PP3 Battery Snap................................................. £0.20
Moulded PP3 Battery Snap.................................. £0.30
BATTERY SNAP CONNECTOR a heavy duty battery clip with the
wires entering the cover at the side. The cover is moulded in ABS.
The colour coded leads are stripped with tinned ends, length
150mm. Suitable for use with
PP3, PP6 and battery holders.
CODE
500-565
CODE
500-280
500-285
500-290
TYPE
PRICE
Moulded PP3 Battery Snap -Side Entry............... £0.30
PCB BATTERY CONTACTS battery clips for 9V batteries which
mount directly into the PCB, helping to cut costs by eliminating
wiring. Two types are available allowing the battery to be mounted
on the surface of the PCB or to be mounted beside the PCB when
height is a consideration. Supplied individually.
PP9 BATTERY SNAP CONNECTOR a twin "mouse type" battery
snap to suit PP1 and PP9 type
batteries. Lead length 100mm.
CODE
500-570
TYPE
PRICE
Moulded PP9 Battery Snap.................................. £0.50
PROTECTIVE BATTERY CAP fits on 9v battery pack. Covers
both male and female contacts.
Protects battery contacts from dirt,
dust and contamination.
CODE
01-0099
CODE
500-260
500-265
500-270
500-275
TYPE
PRICE
Protective Battery Cap.......................................... £0.35
TYPE
PRICE
Battery Press-Stud Connector.............................. £1.05
Battery Socket Connector..................................... £1.05
CODE
500-469
500-470
500-472
BATTERY CLIPS
CODE
500-271
TYPE
PRICE
Snap-In Battery Clip AAA/N Pack of 2.................. £1.15
Snap-In Battery Clip A/AA Pack of 2.................... £1.15
382
PRICE
£0.36
£0.72
£1.15
TYPE
PRICE
Spring Holding Clip for PP3 Battery..................... £0.38
BATTERY SOLDER TAGS a pack of battery solder tags, used for
constructing and repairing
rechargeable battery packs.
Supplied in packs of 10 tags.
TYPE
PRICE
Battery Spring Contact AA/A Single..................... £0.18
Battery Spring Contact C/D.................................. £0.35
T E L . 0 1 2 4 3 8 4 2 424
TYPE
Slot In Battery Contact AA+ve Button..................
Slot In Battery Contact AA-ve Spring...................
Slot In Battery Contact AA Dual...........................
BATTERY SOLDER TAGS
BATTERY SPRING CONTACTS spring contacts for AA, A, C and
D sized batteries. The contacts are made from nickel plated spring
steel and are easy to assemble into
cases/holders with eyelets or rivets.
Sold individually.
CODE
500-305
500-310
PRICE
£0.30
£0.30
£0.23
£0.23
SPRING HOLDER CLIP FOR PP3 BATTERIES A spring metal
clip for physically holding PP3
batteries. Single M3 fixing hole.
Dimensions:- 24 (w) x 26 (h)
x 17mm (d).
SNAP-IN BATTERY CLIPS a range of battery clips which securely hold the battery and connect directly to the PCB. Various sizes
of battery can be accommodated including fractional sizes by varying the distance between the
clips. Suitable for A,AA,AAA
and N Sizes. Supplied in pairs.
CODE
500-250
500-255
TYPE
PCB Battery Contact 9V On-Board +ve...............
PCB Battery Contact 9V On-Board -ve................
PCB Battery Contact 9V Beside-Board +ve.........
PCB Battery Contact 9V Beside-Board-ve...........
SLOT IN BATTERY CONTACTS a range of AA size nickel plated
battery contacts. Designed to fit into moulded slots in an enclosure. A dished positive contact, sprung negative contact or a dual
contact to connect
two cells in series.
BATTERY PRESS-STUD CONNECTORS suitable for use with
PP9 batteries. Fitted with large
stud type connectors that can be
crimped or soldered to the wire.
CODE
01-0102
01-0104
TYPE
PRICE
Battery Contact Single AAA/AAAA/N................... £0.46
Battery Contact Dual AAA/AAAA/N...................... £0.72
Battery Contact Single A/AA................................. £0.54
CODE
500-048
-
TYPE
PRICE
Battery Solder Tags Pack of 10............................ £3.65
FA X . 01243 842525
SQUIRES MODEL & CRAFT TOOLS
SEALED LEAD ACID BATTERIES
SEALED LEAD ACID BATTERY CHARGERS
SLA BATTERY 2V 4Ah a high quality Sealed Lead Acid battery,
dimensions 46 x 100 x 25mm.
A charger is available
see below.
6/12V LEAD ACID BATTERY CHARGER a plug-in charger
designed for use with 6V or 12V lead acid batteries. Suitable for
charging up to 5Ah batteries. Output
voltage selected with slide switch,
supplied with a detachable 2.1mm
DC power plug and a flylead
with crocodile clips. Reverse polarity
and over-current protection.
CODE
501-040
TYPE
PRICE
SLA Battery 2V 4Ah.............................................. £7.99
SLA BATTERIES a range of top quality Sealed Lead Acid Batteries, low self discharge giving
long shelflife, state of the art
design and manufacture for
maximum efficiency. A
range of chargers are
available listed below.
CODE
501-041
501-042
501-043
501-046
TYPE
PRICE
SLA Battery 6V 3 Amp 59 x 133 x 34mm............. £13.99
SLA Battery 6V 4 Amp 100 x 70 x 45mm............. £12.99
SLA Battery 6V 12 Amp 93 x 150 x 49mm........... £19.99
SLA Battery 12V 7.2 Amp 94 x 150 x 64mm........ £19.99
POWERSONIC SLA BATTERIES a range of maintenance free
sealed rechargeable lead acid batteries. No leak/spill proof construction allows safe operation in any position. Rugged ABS plastic case and cover, heavy duty no corrosion terminals, greater
vibration resistance. Lower self discharge. Approved for transport
by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified. UL recognised.
Specification
Input voltage 230Vac, 50Hz
Output voltage 6/12Vdc
Max. current 500mA
Dimensions 80 x 56 x 55mm
Weight 359g
CODE
500-003
SEALED LEAD ACID BATTERY CHARGERS a range of chargers specially designed for charging sealed lead acid batteries. The
chargers are supplied with clips which plug directly to the battery
terminals. The charger will
detect when the battery is
fully charged and then switch
to a trickle charge. When
the unit is disconnected it
will automatically revert to
full charging when the next
battery is connected. Available in 2V, 6V & 12 V types.
CODE
500-057
500-058
500-059
Capacity Discharge
20 hours 20 hours Dims(mm) Weight
Voltage (AH)
(mA)
LxWxH
(kg)
6V
1
50
51 x 42 x 51
0.3
6V
1.3
65
97 x 24 x 51
0.3
6V
3
150
134 x 34 x 60
0.7
6V
4.5
225
70 x 48 x 102 0.9
6V
5
250
67 x 67 x 96
0.9
6V
7
350
151 x 34 x 94
1.4
6V
8
400
99 x 56 x 118 1.5
6V
12
600
151 x 51 x 95
2.1
12V
1.2
60
97 x 42 x 51
0.6
12V
3.4
250
90 x 70 x 102 1.9
12V
4.5
250
90 x 70 x 101 1.7
12V
7
350
151 x 65 x 94
2.6
12V
12
600
151 x 98 x 94
4.1
12V
17
900
181 x 76 x 167 6.4
12V
24
900
166 x 175 x 125 9.0
CODE
01-1700
01-1701
01-1702
01-1703
01-1705
01-1706
01-1707
01-1709
01-1711
01-1712
01-1713
01-1714
01-1715
01-1716
P/Sonic
Code
PS-610
PS-612
PS-630
PS-640
PS-650
PS-670
PS-682
PS-6100
PS-1212
PS-1230
PS-1242
PS-1270
PS-12120
PS-12170
PS-12240
Squires
Code
01-1700
01-1701
01-1702
01-1703
01-1704
01-1705
01-1706
01-1707
01-1709
01-1711
01-1712
01-1713
01-1714
01-1715
01-1716
TYPE
Powersonic SLA Battery 6V 1.0AH......................
Powersonic SLA Battery 6V 1.3AH......................
Powersonic SLA Battery 6V 3.0AH......................
Powersonic SLA Battery 6V 4.5AH......................
Powersonic SLA Battery 6V 7.0AH......................
Powersonic SLA Battery 6V 8.0AH......................
Powersonic SLA Battery 6V 10.0AH....................
Powersonic SLA Battery 12V 1.2AH....................
Powersonic SLA Battery 12V 3.4AH....................
Powersonic SLA Battery 12V 4.5AH....................
Powersonic SLA Battery 12V 7.0AH....................
Powersonic SLA Battery 12V 12.0AH..................
Powersonic SLA Battery 12V 17.0AH..................
Powersonic SLA Battery 12V 24.0AH..................
PRICE
£9.30
£9.75
£9.99
£9.99
£17.99
£22.99
£24.99
£15.35
£18.99
£22.99
£25.99
£49.99
£64.99
£89.99
TYPE
PRICE
6/12V Lead Acid Battery Charger......................... £9.99
TYPE
PRICE
Sealed Lead Acid Battery Charger 2V.................. £13.99
Sealed Lead Acid Battery Charger 6V.................. £13.99
Sealed Lead Acid Battery Charger 12V................ £13.99
SEALED LEAD ACID BATTERY CHARGER a charger for charging 2V, 6V and 12V sealed lead acid batteries with capacities of
2.2 - 10 amps. The
charger detects when
a full charge capacity
is reached and will
automatically switch to
a trickle charge. The
charger is short-circuit
and wrong polarity
protected.
CODE
501-056
TYPE
PRICE
Sealed Lead Acid Battery Charger 2/6/12 Volt..... £24.99
CAR BATTERY CHARGERS
AUTOMOTIVE TRICKLE CHARGER a low cost compact 500mA
constant output plug-in
charger. Suitable for most
12V automotive batteries.
Fitted with crocodile clips
and 1.6m cables.
CODE
640-197
TYPE
PRICE
S/L Automotive Trickle Charger 12V.................... £7.50
E -m a il: sa [email protected] s t ool s . c om - w w w. s q u i re s t ool s . c om
383
SQUIRES MODEL & CRAFT TOOLS
DRAPER BATTERY MASTER a plug-in charger designed to be
left connected to automotive type batteries for extended periods of
time. It will maintain the battery
in a fully-charged ready-to-go
state. Fitted with crocodile
clips, in-line fuse and 4M of
cable. Output 12Vdc @
300mA. Suitable for use
with 30 - 140Ah batteries.
CODE
63147
12V BATTERY CHARGER & TESTER 6A ideal for workshop and
home use, featuring 6A fast charge setting, LED battery condition
tester, LED charging status display, ± polarity inversion protection
and thermal overload
safety protection.
Insulated copper leads
and battery clips.
Suitable for
conventional lead
acid batteries ONLY.
TYPE
PRICE
Battery Master 12V............................................... £26.99
Specification:
Charging output..............................................12V
Input-single phase................................. .230V AC
Charging steps....................................................2
Av. charging current EN60335.........................4A
Effective charging current (12V).......................6A
Dimensions............................. 140 x 130 x 72mm
DRAPER BATTERY CHARGER 12V 4.5A a 12V 4.5A battery
charger for workshop and home use. It features LED battery condition tester, LED charging status display, ± polarity inversion protection, thermal overload safety protection and insulated copper
leads and battery clips. Suitable for conventional lead acid batteries only.
CODE
66799
Specification
Charging output 12V
Input-single phase
230V AC
Charging steps 1
Av. charging current
EN60335 3A
Effective charging
current (12V) 4.5A
Dim 140 x 130 x 72mm
Weight
1.5kg
CODE
72848
TYPE
PRICE
Battery Charger & Tester 12V 6A......................... £46.99
12V INTELLIGENT BATTERY CHARGER 6A ideal for workshop
and home use. It is fully automatic with temperature sensor compensation and continuous adjustment of unsupervised charging.
Maintains battery in a 100% fully charged state. 6A charge setting.
Other features include LED charging status display, ± polarity
inversion protection, audible polarity protection and thermal overload safety protection.
Insulated copper leads
and battery clips. Suitable
for conventional lead acid,
maintenance-free and
gel filled batteries.
TYPE
PRICE
Draper Battery Charger 12V 4.5A........................ £30.99
6V/12V BATTERY CHARGER & TESTER 4.5A ideal for workshop
and home use, featuring 6V and 12V battery voltage setting. Features also include LED battery condition tester, LED charging status display, ± polarity inversion protection and thermal overload
safety protection. Insulated
copper leads and battery
clips. Suitable for
conventional lead
acid batteries ONLY.
Specification:
Charging output..............................................12V
Input-single phase................................. .230V AC
Charging steps....................................................2
Av. charging current EN60335.........................4A
Effective charging current (12V).......................6A
Dimensions............................. 184 x 112 x 86mm
CODE
66806
#
TYPE
PRICE
Intelligent Battery Charger 12V 6A....................... £69.99
BATTERY TEST
Specification:
Charging output...........................................6/12V
Input-single phase..................................230V AC
Charging steps....................................................1
Av. charging current EN60335..........................3A
Effective charging current (12V)....................4.5A
Dimensions..............................140 x 130 x 72mm
CODE
66802
BATTERY HYDROMETER for topping up and testing density of
battery electrolyte.
It has a glass tube,
PVC bulb and spout.
TYPE
PRICE
Battery Charger & Tester 6V/12V 4.5A................ £44.99
CODE
61792
BATTERY AND ALTERNATOR ANALYSER used for checking
battery charge level and alternator output level. It is fitted with
880mm of insulated cable with test probe, the earth lead is fitted
with a crocodile clip. For 12V DC systems only. Warning:- For
testing DC circuits on
cars within the voltage
range only. Not
suitable for testing
mains supply
AC circuits.
PRODUCT CODES
PLEASE NOTE - IT IS VERY IMPORTANT
TO USE THE CORRECT PRODUCT CODE
FOR THE ITEMS YOU WISH TO ORDER
IT IS VITAL TO INCLUDE THE PUNCTUATION
IN THE CODE AND TO FORMAT THE CODE
AS SHOWN IN THE CATALOGUE
384
T E L . 0 1 2 4 3 8 4 2 424
TYPE
PRICE
Battery Hydrometer 1.15 - 1.30g/ml..................... £6.99
CODE
36584
-
TYPE
PRICE
Battery and Alternator Analyser............................ £12.99
FA X . 01243 842525
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement