Comark KM814FS Thermometer
The Comark Infra red thermometers measure surface
temperatures and can be used throughout the food
industry, anywhere that non-contact measurement is
Infra red temperature measurement prevents wastage of the
measured material, and enables checks on areas where
access is difficult.
The KM814FS is pocket sized and offers fast, convenient and
safe measurements. It has a range and accuracy ideally suited
to food industry HACCP requirements.
Laser sighting to pinpoint target area
Pocket sized and easy to use
Fast safe surface temperature measurement
Backlit LCD display
Displays temperature in °C or °F
Emissivity pre-set at 0.97, optimised for food use
Hold function freezes displayed reading
Protective pouch available, ref: 17275
Ratio of Distance to spot size 4:1
Comark is the leading manufacturer and supplier of a wide range of electronic
measurement instruments for temperature, humidity, pressure and pH.
Temperature Measurement
Measurement Range
-30°C to +200°C, -25°F to +400°F
°C and °F
Instrument Accuracy at +23°C
for targets
below 0°C
0°C to + 65°C
above + 65°C
±1°C +0.1%
±1.5% of reading
Accuracy at +73°F for targets
below +32°F
+32°F to +150°F
above +150°F
±2°F +0.1%
±1.5% of reading
±0.5% of reading or ±1°C/2°F, whichever is
Display Hold
7 seconds
Operating Tempreture Range
0°C to +50°C, +32°F to +122°F
Ratio of Distance to Spot Size
Pre-set at 0.97
Battery Type
9V IEC 6LF22 alkaline
L 101mm x W 38mm x H 152mm
All Comark instruments have a minimum one year warranty unless otherwise
stated. The warranty period for temperature probes is for six months and all other
probes and electrodes are unwarranted because the conditions of use are beyond
our control. The Comark warranty covers manufacturing defects and component
failures on all products returned to Comark premises and applies worldwide. The
warranty does not affect your statutory rights. In line with our policy of continuous
development we reserve the right to alter any product specifications without
notice.All products are covered by our Quality Management System which is
compliant with BS EN ISO 9001:2008 for the design, manufacture, supply, service,
repair and recalibration of electronic measuring instruments and equipment.
Selected Comark thermometers, probes and data loggers have BioCote’s silver
techology incorporated into instrument cases and probe handles at the time of
manufacture. The antimicrobial finish inhibits the growth of bacteria, reducing
the risk of cross-contamination and infection in the environment and is becoming
accepted within HACCP and due diligence procedures as an important extra level
of defence.
Distributed by:
C214/1/EN © Comark Instruments
Comark Instruments
Bury Mead Road, Hitchin,
Hertfordshire SG5 1RT, UK
Tel: 0844 (+44 844) 815 6599
Fax: 0844 (+44 844) 815 6598
Email:[email protected] – UK and Ireland
[email protected] – International
Comark Instruments (USA)
PO Box 500
Beaverton, OR 97077, USA
Tel: (800) 555 6658
Fax: (503) 644 5859
Email: [email protected] - USA
Click on or for more information
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF