Moffat E32D5 - Commercial Electric Convection Ovens

Moffat E32D5 - Commercial Electric Convection Ovens
Full Size Digital / Electric Convection Oven
on a Stainless Steel Stand
• 5 full size sheet pan capacity
• 31/3”/ 85mm tray spacing
• Compact 287/8” / 735mm width • Digital display Time and Temperature Controls
• Large easy view ¾” / 20mm high displays
• Electronic thermostat control
• Electronic timer with countdown or time count modes
• Programmable for up to 20 programs
• Water Injection mode
• High performance bi-directional reversing fan system
• 1/4 H.P. 300W bi-directional fan motor
• 6.3kW heating (220-240V) / 5.6kW heating (208V)
• Safe-Touch vented side hinged door (standard LH
hinge). Optional RH hinge (field convertible)
• Stay-Cool door handle
• Porcelain enameled oven chamber
• Plug-in continuous oven door seal
• Dual halogen oven lamps
• Anti-skid 2” / 50mm dia. 3” / 76mm high adjustable
stainless steel feet
• 5 oven wire racks supplied
• 100% recyclable packaging
• Turbofan SK32 Oven Stand
Unit shall be a Moffat electrically heated Turbofan convection oven E.T.L. listed and NSF-4 listed. The oven shall have a one piece porcelain enameled oven chamber, stainless
top and sides and safe touch vented easy clean side hinged door that offers field reversible hinging. Oven shall have capacity for five full size sheet pans. The oven shall be
controlled by an electronic control having separate digital displays and adjusting knobs for time and temperature functions. The oven control shall allow both manual and
programmed operating modes and have separate control keys for water injection, oven light function and timer operation. The unit shall include dual halogen oven lamps. Oven
shall be able to be bench mounted on 3” / 76mm feet or mounted on oven stand model SK32. Unit shall be supplied in 100% recyclable shipping packaging.
Unit shall be a Moffat Turbofan stainless steel oven stand NSF-4 listed. The stand shall be constructed from stainless steel tube with castors, with front castors having
dual swivel and wheel locks. It shall be fitted with 6 tray runners suitable for up to 12 half size sheet pans or 6 full size sheet pans. The stand shall be fully compatible
with, and support, Turbofan Convection Oven models E32D and G32D. Unit shall be supplied in 100% recyclable shipping packaging.
E32D5 Full Size Digital / Electric
Convection Oven on a Stainless
Steel Stand
Porcelain enameled fully welded oven chamber
Stainless steel front, sides and top exterior
Stainless steel oven fan baffle and oven vent
Removable 5 position stainless steel side racks
Oven racks chrome plated wire (5 supplied)
Stainless steel frame side hinged door
0.2” / 5mm thick door outer glass
0.2” / 5mm thick low energy loss door inner glass
Full stainless steel welded door handle
Stainless steel control panel
Aluminized coated steel base and rear panels
Electronic controls with Digital Time and Temperature display,
Manual or Program modes
Large ¾” / 20mm high LED displays
Two individual time and temperature setting control knobs
6 function keys
ON/OFF key
Oven Lamp key (toggle or auto-time off mode settings)
Timer Start/Stop key
Water Injection key (manual shot or timed shot mode settings)
Programs select key
Actual temperature display key
Adjustable buzzer/alarm volume Thermostat range 150-500°F / 50-260°C
Timer range from 180 minutes in countdown mode
Timer range up to 999 minutes in time count mode for holding,
slow cooking
Over-temperature safety cut-out
Stainless steel top and side exterior panels
Porcelain enameled oven chamber
Fully removable stainless steel oven side racks
Removable stainless steel oven fan baffle
Easy clean door system with hinge out door inner glass (no
tools required)
Removable plug-in oven door seal (no tools required)
3” / 76mm high stainless steel feet for easy access underside
Electrical Requirements
208V, 60Hz, 1-phase, 5.8kW, 28A
220-240V, 60Hz, 1-phase, 6.5W, 27A
No cordset supplied
Water Requirements (optional)
Cold water connection ¾” GHT male
80psi maximum inlet pressure / 20psi minimum inlet pressure
External Dimensions
Width 287/8” / 735mm
28¾” / 730mm including 3” / 76mm feet
Height Depth
317/8” / 810mm
Oven Internal Dimensions
18¼” / 465mm
20¼” / 515mm
27½” / 700mm
Volume 6ft³ / 0.17m3
Oven Rack Dimensions
Width 18” / 460mm
Depth 26” / 660mm
Moffat Inc
3765 Champion Boulevard
North Carolina 27105
Ph Toll Free 1-800-551 8795
Ph 336-661 0257
Fax 336-661 9546
Email [email protected]
Nett Weight (E32D5)
196lbs / 89kg
Packing Data (E32D5)
231lbs / 105kg
20.1ft³ / 0.57m3
Width 297/8” / 760mm
32” / 815mm
363/8” / 925mm
SK32 Stainless Steel Stand
All stainless steel welded frame oven stand for Turbofan E32D
and G32D Series ovens
6 position tray runners standard 3” / 76mm diameter wheel swivel castors standard with 2 front
castors with dual swivel and wheel
Welded 1½” and 1¼” square tube front and rear frames
Welded rack supports/side frames
4 dia. 3” / 76mm swivel castors with 2 front castors dual wheel
and swivel lock
Top frame oven supports suit Turbofan E32D and G32D Series
oven mounting Supplied CKD for assembly on site
External Dimensions (SK32 Oven Stand)
287/8” / 735mm
Width Height 345/8” / 880mm 255/8” / 650mm
Nett Weight (SK32 Oven Stand)
40lbs / 18.5kg
Packing Data (SK32 Oven Stand)
51lbs / 23kg
3.5ft³ / 0.1m3
Width 325/8” / 830mm
Height 35½” / 900mm
Depth 6” / 152mm
Moffat Limited
16 Osborne Street PO Box 10-001
Christchurch 8081 New Zealand
Designed and manufactured by
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.
© Copyright Moffat Ltd
Moffat 6.10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF