Marks Nova 5 & 55, Protector BE101 & LA118, 7 & 9 Series 7 & 9, SS55, 31, 2 & 3 Series 31, 2 & 3, 95 Series 95, Survivor 195, 295, 395, 495, Defender, PD, i-Que, HI-SECURITY Lockset Guide
The Nova 5 & 55, Protector BE101 & LA118, 7 & 9 Series, 31, 2 & 3 Series, Survivor 195, 295, 395, 495, 95 Series, Defender, SS55, PD, i-Que, HI-SECURITY are high-quality security products suitable for various applications like schools, hospitals, commercial buildings, and more. They offer a range of features to meet different security needs, including keyed single and double cylinder functions, various lever styles, and electronic access control options. These products are designed for durability and reliability with features like thru-bolted trim for proper alignment and easy installation, independent lever support springs, and UL Listed for 3-hour fire rating.
Advertisement
Advertisement
I
NTRODUCTION
Marks USA Facilities Lockset Guide was created to give a more in depth description about products suitable for installation in School Systems, Housing Authorities, Hospitals, Commercial Buildings, etc. Contained within this guide is information about our Nova Series Mortise Locksets, the Protector Series Mortise Locsksets, Commercial Grade Mortise Locksets and Deadlocks,
Survivor Series Cylindrical Leversets, the Contract Line Cylindrical Locksets, Defender Series Deadbolts & Deadlatches, the Custom Lockset Division, Institutional Life Safety Locksets, Hospital Push/Pull Paddlesets, the i-Que Electronic Access Control
Series and HI-SECURITY™ Cylinders. The guide assists the institutional user by informing the reader of lockset features which will satisfy the requirements of institutional facilities for both design and maintenance.
T
ABLE OF
C
ONTENTS
Mortise Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5
NOVA Series 5 & 55 Grade 1 Mortise Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Protector Series BE101 & LA118 Grade 1 Mortise Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Series 7 & 9 Commercial Grade Mortise Locksets; Series 31, 2 & 3 Mortise Deadlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Mortise Lockset Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5
Cylindrical Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-11
Survivor Series Grade 1 Cylindrical Leversets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Clutch System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Super Strength Retractor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Long Life Lever Support Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Strength & Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Quick Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Easy Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Uses Most Available Cylinders (Tailpieces: Standard & IC Core) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
ADA • Grades 1 & 2 • Made in U.S.A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Survivor Series Grade 1 REX & Electrified Leversets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Contract Line Grade 2 1120 Series Cylindrical Knobsets & 1150 Series Cylindrical Leversets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Cylindrical Lever Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Tubular Deadbolts & Cylindrical Cartridge Deadlatches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13
Defender Series Tubular Deadbolts & Cylindrical Cartridge Deadlatches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Unique Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Protective Steel Shutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Simple Fast Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
One Cylinder Fits All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Easy Retrofit Deadbolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Custom Lockset Division . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
About Marks USA Custom Lockset Division . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Institutional Life Safety Locksets & Hospital Push/Pull Paddlesets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-17
SS55 Series Institutional Life Safety Grade 1 Mortise Locksets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
SS55 Series Institutional Life Safety Grade 1 Cylindrical Locksets and Mortise Deadlocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
PD Series Institutional Life Safety Grade 1 Mortise & Cylindrical Hospital Push/Pull Paddlesets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Electronic Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-22
i-Qwik Series Electronic Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
i-Que Series Stand Alone Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
i-Que Series Prox Stand Alone Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
i-Que Series Rim Exit Device Stand Alone Access Control, Adapter Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
i-Que Series Digital Access Control Keypad or Keypad with Proximity Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
i-Dat MARK2 USB Unit With U3 Memory Stick Upload/Download Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Biometric Fingerprint Reader with Leverset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
175 BIO Series Biometric Fingerprint Reader with Leverset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
HI-SECURITY™ & Security-Mate™ Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
What Make Marks HI-SECURITY™ Cylinders Unique? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Cylinder Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Marks Security-Mate™ Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Marks USA HI-SECURITY™ Key Control Management Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Lifetime Mechanical Limited Warranty: MARKS USA warrants that its products are free from defects in materials and workmanship. This warranty is limited to the lifetime of the door on which our lock is installed. In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-MARKS products or parts. We reserve the right to make changes in materials, components or manufacturing methods. Liability under all warranties expressed or implied is limited to replacement of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages. Additionally, the company will not warrant ANSI A156.2 Grade 2 lever product installed in educational facilities and student housing.
2 Year Electronic Limited Warranty: MARKS USA warrants to the original purchaser that its products are free from defects in materials and workmanship so long as they occupy the premises.
In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge at its sole discretion. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, improper application or specification, ordinary wear and tear, misuse, abuse, accident, improper voltage, unauthorized service, or use with unauthorized non-MARKS products or parts. We reserve the right to make changes in materials, components or manufacturing methods. Liability under all warranties expressed or implied is limited to replacement of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages or any shipping charges related to exercising of this warranty.
Lifetime Finish Limited Warranty: MARKS USA finishes with the suffix “E” indicate finishes which have a “PVD” coating. Locksets with the “3E” finish will be warranted to the original user against tarnishing as long as the user occupies the residential premises upon which the lockset was originally installed. Locksets with this finish, used in commercial applications will be limited to two years. This warranty does not cover scratches, abrasion, abused or misused products. Upon return of a defective product to Marks USA, we will, at our sole discretion, either replace the product or refund the purchase price in exchange for the product. Due to climatic conditions, chemical or abrasive actions, other finishes are excluded from this warranty. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages arising from the sale of the product.
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
NOVA SERIES 5 & 55
M
ORTISE
L
OCKSETS
ANSI 156.13 G
RADE
1
N
OVA
S
ERIES
5 & 55 M
ORTISE
L
OCKSETS
Our Nova Series Mortise Locksets represent years of development into world class BHMA Certified mortise locksets and carry the Marks
Lifetime Mechanical Warranty. The Nova Series is available with a variety of different knobs, levers, roses and plates as well as custom capabilities with 32 functions in popular finishes. Whether your application is a single style single function lockset or an entire complex with multiples and varieties, the Nova Series has the form, fit and competitive price to complete your project.
5RR57/26D Mortise Lockset with Monaco Lever Shown
5RW96EL/32D Mortise Lockset with American Lever Shown
• Nova Series Grade 1 Mortise Locksets are Certified
• Thru-bolted trim for proper alignment and ease of installation
• Self adjusting spindles
• Independent lever support springs
• Lifetime Mechanical Warranty
5DR96/32D Mortise Lockset with
Drake Plate & Titan Lever Shown
MARKS #
5 & 55
FUNCTION
KEYED SINGLE CYLINDER, NO DEADBOLT
D
DW
E
OFFICE / VESTIBULE
VESTIBULE
OFFICE
EW
J
JM, JR
GL
STOREROOM
CLASSROOM
HOSPITAL (HOLDBACK)
INST. PRIVACY
EL
EU
ELECTRICALLY LOCKED
ELECTRICALLY UNLOCKED
KEYED SINGLE CYLINDER, WITH DEADBOLT
A
B
F
FS
FW
FD
H
LH
ENTRANCE
ENTRANCE
DORMITORY
DORMITORY
DORMITORY
APARTMENT
HOTEL
SPEC. PRIVACY
KEYED DOUBLE CYLINDER, NO DEADBOLT
G
GC
GG
GR
WW
ENTRANCE
INTRUDER LATCHBOLT
CLASSROOM SECURITY
CLASSROOM SECURITY w/HOLDBACK
INSTITUTION
KEYED DOUBLE CYLINDER, WITH DEADBOLT
AC
C
FC
FA
FX
ENTRANCE
STOREROOM
INTRUDER DEADBOLT
DORMITORY
DORMITORY
KEYLESS
N
L
LF
LJ
EX
PASSAGE
BATHROOM
PRIVACY
PRIVACY
EXIT
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
ANSI # FINISH GROUPS
F04
F07
F05
F06
F26
F08, F10
F21
F12
F13
F20
F15
F09
F32
F30
F35
F14
F34
F11
F33
F01
F02
F19
F22
F31
3, 10, 10B,
32, 32D
INISHES ARE EXCLUDED FROM THIS WARRANTY
S
TANDARD
F
EATURES
5 Series (2-3/4" backset); 55 Series (2-1/2" backset)
1. Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick stainless steel. Cover plate 1/16" thick.
2. Deadbolt: Stainless steel with hardened roll pins, 1" throw.
3. Latch: Solid stainless steel with antifriction latch lever,
3/4" throw (reversible).
4. Auxiliary Deadlatch: 1/2" throw (reversible).
5. Hubs: Steel, 9/32'' on diamond, 5/16" on square with security separator.
Independent exterior and interior lever support springs.
6. Lever Support Springs: Lever support springs with 5/16" Hubs
7. Hub Follower: (to lock hub) steel 1/8" thick.
8. Hub Stop: (to limit lever travel) steel 1/8" thick.
9. Case: Stamped steel 3/32" thick, zinc dichromate finish.
5 Series Mortise Lockset Shown 55 Series Mortise Lockset Shown
❋
Standard & HI-SECURITY™ IC Core Models:
Interchangeable Core models for 6 or 7 pin cores (not included).
Accepts: Marks, Marks HI-SECURITY™, Medeco
®
, KeyMark™, Falcon,
Schlage
® small format & Best
®
. IC Core Tailpieces ARE Included.
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 1
PROTECTOR SERIES
M
AXIMUM
S
ECURITY
M
ORTISE
L
OCKSETS
ANSI 156.13 G
RADE
1
P
ROTECTOR
S
ERIES
All Marks USA Protector Series mortise locksets feature an “Override Guard” which is designed to result in spindle failure when torque of over 550 foot lbs. is applied. The lockset remains locked and when spindle is replaced, the lockset is fully operational. Protector Series locksets have a lifetime mechanical warranty, meet or exceed all operational and security tests of ANSI A156.13-2002 for Series 1000,
Grade 1. Protector Series Locksets are UL listed, 3-hour fire rated and meet ADA requirements.
Page 2
BE101A/32D Mortise Lockset with Titan Lever Shown
LA118A/32D Mortise Lockset with American Lever Shown
MARKS #
BE101 & LA118
FUNCTION
KEYED SINGLE CYLINDER, NO DEADBOLT
D
DW
E
EW
GL
J
OFFICE VESTIBULE
VESTIBULE
OFFICE
STOREROOM
INST. PRIVACY
CLASSROOM
A
B
F
FS
FW
FD
H
LH
JM, JR
EL
EU
HOSPITAL (HOLDBACK)
ELECTRICALLY LOCKED
ELECTRICALLY UNLOCKED
KEYED SINGLE CYLINDER, WITH DEADBOLT
ENTRANCE
ENTRANCE
DORMITORY
DORMITORY
DORMITORY
APARTMENT
HOTEL
SPEC. PRIVACY
ANSI #
F04
F07
F26
F05
F06
F08, F10
F21
F12
F13
F20
F15
S
TANDARD
F
EATURES
Performance Specifications:
Life Test: 1,500,000 cycles minimum.
Exterior and Interior Trim Specifications:
Brushed stainless steel plate assemblies with machined lever bearings.
Screwless stainless steel levers assembled to plate with hardened snap rings.
(Levers cannot be removed without disassembling trim plates from inside.)
Additional trim designs are available with override guard lock protection,
Consult factory.
Exterior: 4 welded thru-posts. Center posts pass through lock body, automatically aligning trim 8-1/2" x 2-3/4" x 1/8" thick
Interior: 4 stainless steel, tamper-proof mounting bolts connecting inside plate, 8-1/2" x 2-3/4" x 1/8" thick
Cylinder: 1-1/8" long solid brass, 6 pin with 2 keys
Strike: 4-7/8" x 1-1/4" x 3/32" thick, 5/8" curved lip
Conforms to ANSI spec., A115.1
Door Thickness: 1-3/4" standard. Extended range available
Screwless Lever Choices: American, Crescent, Plaza & Titan
FINISH
GROUPS❖
3, 10,
10B, 32D
MARKS #
BE101 & LA118
FUNCTION
N
L
LF
LJ
KEYED DOUBLE CYLINDER, NO DEADBOLT
G
GC
WW
ENTRANCE
INTRUDER LATCHBOLT
INSTITUTION
KEYED DOUBLE CYLINDER, WITH DEADBOLT
AC ENTRANCE
C
FC
STOREROOM
INTRUDER DEADBOLT
FA
FX
DORMITORY
DORMITORY
KEYLESS
EX
DUMMY TRIM
DI, DO
DT
PASSAGE
BATHROOM
PRIVACY
PRIVACY
EXIT
DUMMY TRIM INSIDE/OUTSIDE
DUMMY TRIM
ANSI #
F09
F32
F30
F35
F14
F34
F11
F33
F01
F02
F19
F22
F31
FINISH
GROUPS❖
3, 10,
10B, 32D
❖
Additional Finishes, Consult Factory.
Lock Specifications: 5 Series (2-3/4" Backset)
NOVA SERIES GRADE 1 MORTISE LOCKSETS ARE BHMA CERTIFIED
Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick;
Cover plate 1/16" thick with tamper-proof screws
Deadbolt: Stainless steel with hardened roll pins, 1" throw
Latch: Solid stainless steel with antifriction latch lever, 3/4" throw (reversible)
Aux. Deadlatch: 1/2" throw (reversible)
Case: Stamped steel 1/16" thick
Hubs: Steel, 5/16" on square w/security separator, 9/32" on diamond;
Independent exterior and interior lever support springs
Hub Lock Arm: Steel 1/8" thick (to lock hub)
Exterior Lever Override Guard Integral cam spindle/spring assembly engages hub lock arm, case hardened steel, 1/8" thick.
Interior Lever Override Guard Integral cam spindle/spring assembly prevents interior lever override, case hardened steel, 1/8" thick
❋
Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco
®
,
KeyMark™, Falcon, Schlage
® small format & Best
®
. IC Core Tailpieces ARE Included.
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
COMMERCIAL GRADE
S
ERIES
7 & 9 M
ORTISE
L
OCKSETS
& S
ERIES
31, 2 & 3 M
ORTISE
D
EADLOCKS
C
OMMERCIAL
G
RADE
M
ORTISE
L
OCKSETS
S
ERIES
7 & 9
Marks 7 & 9 Series Mortise Locksets feature a high pressure cast Zamac body with a baked enamel finish to resist corrosion, cast alloy 1" throw deadbolt for strength, and a flexible face plate that may be installed flat or with a 3 degree bevel. The 7 & 9 Series are available with a variety of different knobs, levers, roses and plates making these efficient mortise locksets a great choice for commercial applications when grade 1 fire rated locksets are not required.
7NY10/3 Mortise Lockset with
New Yorker Plate &
Round Knob Shown
9NY10/26 Mortise Lockset with
New Yorker Plate &
Round Knob Shown
MARKS # 7 & 9 FUNCTION
KEYED SINGLE CYLINDER, NO DEADBOLT
D
DW
OFFICE / VESTIBULE
VESTIBULE
ANSI #
KEYED SINGLE CYLINDER, WITH DEADBOLT
A
B
F
FS
FW
ENTRANCE
ENTRANCE
DORMITORY
DORMITORY
DORMITORY
F08, F10
F21
F12
F13
KEYED DOUBLE CYLINDER, WITH DEADBOLT
AC
C
FA
FX
ENTRANCE
STOREROOM
DORMITORY
DORMITORY
KEYLESS
N
L
LF
PASSAGE
BATHROOM
PRIVACY
F35
F14
F11
F33
F01
F02
F19
FINISH GROUPS
3, 10, 10B,
32, 32D
❋
Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco
®
,
KeyMark™, Falcon, Schlage
® small format & Best
®
. IC Core Tailpieces ARE Included.
S
TANDARD
F
EATURES
Series 7:
Backset: 2-3/4"
Bolt throw: Cast alloy full 1" throw
Latch throw: 5/8" (anti-friction)
Case: High pressure cast Zamac, baked enamel finish
Front: 1-1/4" x 8", Flat or 3° bevel
Hubs: 9/32" on square steel with security separator
Series 9:
Backset: 2-1/2"
Bolt throw: Cast alloy full 1" throw
Latch throw: Solid brass 1/2" throw, reversible
Case: High pressure cast Zamac, baked enamel finish
Front: 1-1/16" x 7-5/8", Flat or 3° bevel
Hubs: 9/32" on square steel with security separator
M
ORTISE
D
EADLOCKS
S
ERIES
31, 2 & 3
M
S
K
L
X
MARKS #
31, 2 & 3
—
FUNCTION
LOCK ONLY
CYLINDER x TURNPIECE
COMMUNICATING SINGLE CYL.
DOUBLE CYLINDER
CLASSROOM (Specify Handing)
TURNPIECE ONLY
ANSI #
—
E06072
E06082
E06062
E06092
FINISH
GROUPS
3, 3E, 10,
10B, 26, 26D,
32, 32D
Series 31
Mortise Deadlock
Series 2
Mortise Deadlock
S
TANDARD
F
EATURES
Series 31 BHMA Certified:
Backset: 2-3/4"
Bolt throw: 1" stainless steel with hardened roll pins
Case: Stamped Steel
Front: 1-1/16" x 4-5/8" adjustable bevel
Cylinder: Solid brass cylinder,
6-pin, “C” keyway, 2 keys
Strike: #4035 Included
Series 3
Mortise Deadlock
❋
Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco
®
,
KeyMark™, Falcon, Schlage
® small format & Best
®
. IC Core Tailpieces ARE Included.
Series 2 & 3:
Backset: Series 2: 2-1/2";
Series 3: 2-3/4"
Bolt throw: 1"
Case: High pressure cast
Front: 1-1/16" x 4-5/8" flat or
3° bevel
Cylinder: Solid brass cylinder,
6-pin, “C” keyway, 2 keys
Strike: #4035 Included
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 3
Page 4
MORTISE LOCKSET FUNCTIONS
ANSI 156.13 G
RADE
1
M
ORTISE
L
OCKSET
F
UNCTIONS
Single Cylinder Functions
ANSI # CODE MARKS FUNCTION
Strike I/S O/S
F04: OFFICE
Latch by knob/lever either side except when outside knob/lever locked by stop-button in front, then by key outside. Auxiliary latch deadlocks latch. Inside always open.
5036
E
F05: CLASSROOM
Latch by knob/lever either side except when outside knob/lever locked by key. When locked, latch bolt retracted by key. Inside always open. Auxiliary latch deadlocks latch.
5036
J
F06: HOLDBACK “A”
Latch by knob/lever either side except when outside knob/lever locked or unlocked by key. Auxiliary latch deadlocks latch. Inside always open. Inside knob/lever unlocks outside knob/lever. Latch bolt can be locked in retracted position by locking inside hub. Can be used with blank outside trim.
5036
F06: HOLDBACK “B”
Latch by knob/lever either side except when outside knob/lever locked or unlocked by key. Auxiliary latch deadlocks latch. Inside always open. Inside knob/lever will not unlock outside knob/lever. Latch bolt can be locked in retracted position by locking outside hub. Can not be used with blank outside trim.
5036
JM
JR
F07:
STOREROOM
Latch by knob/lever inside, key outside. Outside knob/lever always rigid. Auxiliary latch deadlocks latch.
Inside always open.
5036
EW
F08, F10:
ENTRANCE
Latch by knob/lever either side except when outside locked by stop-button; then by key outside, knob/lever inside. Deadbolt by key outside, turnpiece inside.
Deadbolt deadlocks latch.
9035
A
F12:
DORMITORY
Latch by knob/lever either side except when outside knob/lever locked by stop-button or projected deadbolt.
Deadbolt by turnpiece inside. Inside knob/lever retracts latch and deadbolt simultaneously, leaving outside locked.
Deadbolt deadlocks latch.
9035
F13:
DORMITORY
Latch by knob/lever either side except when projected deadbolt locks outside knob/lever and deadlocks latch.
Deadbolt and latch by key outside. Deadbolt by turnpiece inside. Inside knob/lever retracts latch and deadbolt simultaneously, automatically unlocking outside knob/lever.
9035
F15:
HOTEL
Inside knob/lever always free, outside rigid.
Latch by knob/lever inside, key outside.
(When deadbolt projected by turnpiece all keys are shut out except emergency key). Inside knob/lever retracts deadbolt and latch simultaneously.
Auxiliary latch or deadbolt deadlocks latch.
Indicator available.
5035
F
FW
H
ANSI # CODE
F20: APARTMENT
Latch by knob/lever either side except when outside locked by stop-button or projected deadbolt. Latch deadlocked by auxiliary latch or deadbolt. Deadbolt and latch by key outside.
Deadbolt by turnpiece inside. Inside knob/lever retracts latch
& deadbolt simultaneously, leaving outside locked.
MARKS FUNCTION
Strike I/S O/S
5035
FD
F21: ENTRANCE
Latch by knob/lever either side. Deadbolt by key outside, turnpiece inside. Deadbolt deadlocks latch.
F26: INSTITUTIONAL PRIVACY
Latch by knob/lever either side except when outside knob/lever locked by inside thumbturn. Latch deadlocked by auxiliary latch. Key outside opens latch. When outside locked, inside knob/lever retracts latch, automatically unlocking outside knob/lever.
5036
OFFICE VESTIBULE:
Latch by knob/lever either side except when outside knob/lever locked by stop-button in front, then by key outside.
9035
VESTIBULE:
Latch by knob/lever inside, key outside.
Outside knob/lever always rigid.
DORMITORY:
Latch by knob/lever inside. Outside knob/lever always rigid.
Deadbolt and latch by key outside. Deadbolt by turnpiece inside. When deadbolt is projected, latch is deadlocked.
Inside knob/lever retracts latch and deadbolt simultaneously.
9035
SPECIAL PRIVACY:
Inside knob/lever always free, outside rigid. Latch by knob/lever inside, key outside. Deadbolt by turnpiece inside, emergency release outside. Inside knob/lever retracts deadbolt and latch simultaneously. Auxiliary latch deadlocks latch.
5035
STOREROOM:
Latch by thumbpiece inside. Key outside.
STOREROOM:
Latch by thumbpiece or knob/lever inside. Key outside.
Auxiliary latch deadlocks latch.
Electrified Functions
ELECTRICALLY LOCKED (Fail Safe):
Outside always locked electrically. Open by key outside, switch or loss of power. Auxiliary latch deadlocks latch.
Inside always open.
9035
9035
9035
5036
5036
ELECTRICALLY UNLOCKED (Fail Secure):
Outside always locked until unlocked by key or electrically energized. Auxiliary latch deadlocks latch. Inside always open.
5036
B
GL
D
DW
FS
LH
DN
EN
EL
EU
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
MORTISE LOCKSET FUNCTIONS
ANSI 156.13 G
RADE
1
M
ORTISE
L
OCKSET
F
UNCTIONS
Double Cylinder Functions
ANSI # CODE MARKS FUNCTION
Strike I/S O/S
F09: ENTRANCE
Latch by knob/lever either side except when outside knob/lever locked by key inside, latch retracted by key outside. Outside remains locked. Auxiliary latch deadlocks latch.
5036
F11: DORMITORY
Latch by knob/lever either side except when outside knob/lever locked by stop-button or projected deadbolt. Deadbolt by key either side. Inside lever retracts latch and deadbolt simultaneously leaving outside locked. Deadbolt deadlocks latch.
9035
G
FA
F14: STOREROOM
Latch by knob/lever either side. Deadbolt by key either side.
Deadbolt deadlocks latch.
9035
C
Non-Keyed Functions
ANSI # CODE MARKS FUNCTION
Strike I/S O/S
F01: PASSAGE
Latch by knob/lever either side.
9035
F02:BATHROOM
*
Deadbolt deadlocks latch. To unlock from outside, remove emergency button, insert emergency key in access hole and turn. Optional coin key assembly available.
9035
L
F19: PRIVACY
*
deadbolt locks outside knob/lever and deadlocks latch.
Deadbolt by turnpiece inside. Inside knob/lever retracts
9035
latch and deadbolt simultaneously, automatically unlocking outside knob/lever. To unlock from outside, remove emergency button, insert emergency key in access hole and turn. Optional coin key assembly available.
LF
N
F24: APARTMENT HANDLE
Latch by thumbpiece either side except when outside is locked by key inside. When outside is locked, latch retracted by key outside or thumbpiece inside. Auxiliary latch deadlocks latch.
5036
F25: STOREROOM “B” Body
Latch by thumbpiece either side.
Deadbolt by key either side.
9035
G
C
F22: PRIVACY
Latch by knob/lever either side except when outside knob/lever is locked by inside turnpiece. Turning inside knob/lever or closing door unlocks outside knob/lever. To
9035
unlock from outside, remove emergency button, insert emergency key in access hole and turn. Optional coin key assembly available.
F25: STOREROOM
Latch by thumbpiece either side except when outside thumbpiece locked by stop-button in front; then by key outside. Deadbolt by key both sides. Deadbolt deadlocks latch.
9035
SO
F31: Exit
Latch by knob/lever inside, non-removable blank trim or no trim outside. Auxiliary latch deadlocks latch.
F30: INSTITUTION
Both knob/levers rigid. Auxiliary latch deadlocks latch.
Latch by key either side.
5036
5036
WW
Deadbolt Functions
F16: DEADLOCK
Deadbolt by key either side.
F17: DEADLOCK
Deadbolt by key outside and turnpiece inside.
9035
F32: INTRUDER LATCH BOLT
Latch by knob/lever either side except when outside knob/lever is locked from inside or outside by key. Latch operated by key from inside or outside. Auxiliary latch, deadlocks latch.
Inside always open.
5036
9035
GC
CLASSROOM SECURITY
Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. Auxiliary latch deadlocks latchbolt when door is locked. Inside knob/lever is always free for immediate egress.
5036
CLASSROOM SECURITY w/HOLDBACK
Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside.
Auxiliary latch deadlocks latchbolt when door is locked.
Depress inside knob/lever and turn key 360° for holdback feature.
Inside knob/lever is always free for immediate egress.
5036
GG
GR
F18: DEADLOCK
Deadbolt by key one side only.
F29: DEADLOCK
Deadbolt by key outside.
Inside turnpiece will retract but will not project deadbolt.
Deadlock Functions
E06072:
CYLINDER x TURNPIECE
Deadbolt by inside turnpiece or outside key.
9035
9035
F33: DORMITORY
Latch by knob/lever either side except when projected deadbolt locks outside knob/lever and deadlocks latch. Deadbolt and latch by key either side. Inside lever retracts latch and deadbolt simultaneously, automatically unlocking outside knob/lever.
F34: INTRUDER DEADBOLT
Latch by knob/lever either side. Deadbolt by key either side.
Inside knob/lever retracts latch and deadbolt simultaneously, automatically unlocking outside knob/lever. Auxiliary latch deadlocks latch.
9035
5035
FX
FC
E06082:
Deadbolt by key from one side only.
E06062:
Deadbolt by key either side.
E06092:
COMMUNICATING SINGLE CYLINDER
DOUBLE CYLINDER
CLASSROOM
*
*
Deadbolt by outside key. Turnpiece will retract but not project deadbolt.
F35: STORE DOOR
Latch by knob/lever either side except when outside knob/lever locked by stop-button in front, then by key outside. Deadbolt by key either side. Deadbolt deadlocks latch
.
9035 AC
TURNPIECE
Deadbolt by inside turnpiece.
PRIVACY INDICATOR AVAILABLE
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
LJ
EX
T
P
S
SC
K
L
M
S
X
Page 5
SURVIVOR SERIES
C
YLINDRICAL
L
EVERSETS
ANSI 156.2 G
RADES
1 & 2
S
URVIVOR
S
ERIES
Marks USA Survivor Series locksets are the most durable cylindrical lever locksets. The series is offered in four lever styles, conventional cylinder, IC core for "Best" size cores and Schlage® as well as others. The Survivor Series locksets are backed by
Marks lifetime mechanical warranty. All functions are available in six standard finishes, are UL Listed for 3-hour fire rating, and satisfy
ADA requirements.
195/26D
American Lever
Shown
395/US3
Monaco Lever
Shown
295/10B
Crescent Lever
Shown
495/26
Titan Lever
Shown
Page 6
DW
DA
FQ
T
TK
B
AB
AQ
S
F
N
L
LK
P
DC
A
DT
NB
FB
SB
FEL
GB
BS
H
DB
DO
FEU
MARKS # 195, 295, 395, 495
COMM.
CYLINDER
IC CORE
CYLINDER❋
395
Not Available
IC Core
RDW
RDA
—
RT
RTK
RB
RAB
—
RS
RF
—
—
—
—
RDC
RA
—
—
RFB
RSB
RFEL
RGB
RBS
—
RDB
—
RFEU
DESCRIPTION
PASSAGE
PRIVACY
PRIVACY
PATIO
COMMUNICATING
ENTRY
ENTRY
ENTRANCE
EXIT
CLASSROOM
STOREROOM
INSTITUTION
VESTIBULE
EXIT
CORRIDOR
HOSPITAL/PRIVACY
STORE DOOR
SERVICE STATION LOCK
HOTEL
CLASSROOM INTRUDER
DUMMY TRIM OUTSIDE
FULL DUMMY TRIM
COMMERCIAL PASSAGE
COMMERCIAL STOREROOM
COMMERCIAL CLASSROOM
ELECTRICALLY LOCKED
ELECTRICALLY UNLOCKED
ANSI #
F75
F76
F76 MOD.
F77
F80
F81
F82A
F109
F83
F84
F86
F87
F88
F89
F90
F90 MOD.
—
F111
F112
F113
—
F91
F92
F93
F110
—
—
FINISH
GROUPS
3, 4,
10, 10B,
26, 26D
S
TANDARD
F
EATURES
• Backset: 2-3/4"; 2-3/8", 3-3/4" & 5" Optional
• Latch #1834, Front: 1-1/8" x 2-1/4"; Throw: 9/16"; Stainless steel nose
• Levers: Solid cast Zamac; w/ 1/2" return (Except 395 & 495)
• Roses: Thru-bolted, 3-7/16" dia., spring loaded 2-#10 thru-bolts
• Strike: #1135, 4-7/8" ASA curved lip strike.
• Door thickness: 1-5/8" - 1-7/8"; 1-3/8" doors use K1904 spacer.
• Cylinder: MARKS “C” keyway, 6 pin w/ 2 keys
• UL Listed, 3 hour fire rated
95 S
G
RADE
ERIES
L
1
EVERSETS
T
ESTED
T
O
6,000,000+
C
YCLES
❋
Standard & HI-SECURITY™ IC Core Models:
Interchangeable Core models for 6 or 7 pin cores (not included).
Accepts: Marks, Marks HI-SECURITY™, Medeco
®
, KeyMark™, Falcon,
Schlage
® small format & Best
®
. IC Core Tailpieces ARE Included.
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
SURVIVOR SERIES
C
YLINDRICAL
L
EVERSETS
ANSI 156.2 G
RADES
1 & 2
C
LUTCH
S
YSTEM
When locked, the Survivor's clutch disengages the outside lever allowing it to turn freely without opening the latch. This reduces the torque applied to the outside lever. Other locksets with RIGID levers are prone to failure because of excessive torque.
S
UPER
S
TRENGTH
R
ETRACTOR
The Survivor's retractor is cast stainless steel with bronze roller bearings for ultra-high strength, smooth operation & long life.
L
ONG
L
IFE
L
EVER
S
UPPORT
S
PRINGS
Each Survivor rose contains it’s own proprietary high strength lever support spring.
Over Six Million continuous cycles,
NO LEVER DROOP...EVER!
ANSI Grade Rose Diameter
1 3-7/16"
2 3-1/4"
S
TRENGTH
& L
IFE
SURVIVOR
:
• Withstands torque of 1800 inch-pounds; over twice ANSI/BHMA (1996) test value
• Life tested over 6 million cycles;
Fully operational after these tests
• Thru-bolting with #10 epoxy coated bolts assures vibration-proof mounting
• Only two thru-bolts for easy installation
• Breakaway handles (American & Crescent design) protect against excessive abuse
Q
UICK
I
NSTALLATION
• The Survivor easily adjusts for door thickness
• 1-5/8" - 1-7/8" without the use of spacer plates or special tools
• Adjustment is made by merely rotating outside rose
• Spacer plates are available for 1-3/8" doors with K1904 spacer rings
• Extend to 2-1/4" door thickness with D7 option
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 7
SURVIVOR SERIES
C
YLINDRICAL
L
EVERSETS
ANSI 156.2 G
RADES
1 & 2
E
ASY
I
NSTALLATION
Survivor door preparation is simplified with the fast and accurate, easy to use
J295 installation tool. One side is for the
2-3/4" backset, the other for the 2-3/8" backset.
For use with either wood or metal doors.
Page 8
U
SES
M
OST
A
VAILABLE
C
YLINDERS
Our locksets accept many other OEM standard, HI-SECURITY™ and IC Core cylinders using MARKS adapter tailpieces.
Cylindrical Lock Tailpieces
1903
F1903-C
1903S
R1981
F1903S-C
Cylindrical IC Core Tailpieces
HR1984
AR1989-Y
HR1984S
AR1989S-Y
1903-L
HR1984-G
F1903-F19
R1983
1903S-L
A1903H
HR1984S-G
F1903S-F19
PART #
1903
1903S
1903-L
1903S-L
F1903-C
CYLINDRICAL LOCK TAILPIECES
FUNCTION
AB, B, DA (ext.), DW, F, FEL, FEU
S, DA (int.), DB, DC, SB, T, TS
AB, B, DA (ext.), DW, F, FEL, FEU
S, DA (int.), DB, DC, SB, T, TS
CYLINDER
MARKS 1982
Arrow PK 100C, Ilco 705,
Lori 1539, Sargent 13-3266,
Abloy, ASSA 65673, 65691
AB, B, DA (ext.), DW, F, FEL, FEU
S, DA (int.), DB, DC, SB, T, TS
Schlage 23-001, Primus,
Corbin-Russwin 2000-034
F1903S-C
A1903H
HR1984
HR1984S
HR1984-G
HR1984S-G
AR1989-Y
AR1989S-Y
AR1999S-M
F1903-C-F19
F1903S-C-F19
H
IC CORE TAILPIECES
Marks 1982H, Schlage 23-014
AB, B, DA (ext.), DW, F, FEU, FEL
S, DA (int.), DB, DC, SB, T, TS
6 or 7 pin Marks, KSP,
Best
®
, Falcon, Medeco
®
,
Keymark
™
, Sargent
®
,
Schlage
®
Small Format
AB, B, DA (ext.), DW, F, FEU, FEL
S, DA (int.), DB, DC, SB, T, TS
AB, B, DA (ext.), DW, F, FEU, FEL
S, DA (int.), DB, DC, SB, T, TS
AR1999-M M AB, B, DA (ext.), DW, F, FEU, FEL
S, DA (int.), DB, DC, SB, T, TS
AB, DW, F
S, DA, DB, DC, SB, T, TS
6 or 7 pin Corbin
6 or 7 pin Yale
Medeco
Medeco
®
Medeco
®
®
6 pin Schlage
Large Format
®
R1981
R1983
Spacer
Security Disc
C
YLINDERS
The Grade 1 Survivor is supplied with 6 pin cylinders in
MARKS “C” keyway with 2 nickel-silver keys.
The Grade 2 Survivor is supplied with 5 pin cylinders in
MARKS “C” keyway with 2 brass keys.
Grade 1 and Grade 2 are also available in 6 or 7 pin IC Core models for Best™, Corbin-Russwin, Medeco “Keymark”, Schlage
& Yale sizes.
ADA • G
RADES
1 & 2 • M
ADE IN
U.S.A.
• American & Crescent style levers returning to within 1/2" of door surface
• Decorative “Monaco” style lever
• Satisfies all Federal ADA and State Disability requirements
• ANSI/BHMA specification 156.2 (1996) Series 4000, Grade 1 & 2
• UL Listed for 3 hour fire rating
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
SURVIVOR SERIES
REX & E
LECTRIFIED
L
EVERSETS
L
EVERSETS
ANSI 156.2 G
RADES
1 & 2
S
URVIVOR
W
ITH
R
EQUEST TO
EX
IT
Our Grade 1 Electrified Survivor Series locksets featuring “The Clutch” are available for operation as either electrically locked or unlocked. When locked, the Survivor's clutch disengages the outside lever allowing it to turn freely without opening the latch. The
Grade 1 Survivor Series Cylindrical Leverset incorporates a Request to EXit switch in both the Electrified (FEL & FEU) and Storeroom functions. Activating the inside lever for egress initiates the built-in REX output, providing a momentary signal for the access control
REX input for alarm shunt during egress with all the features of the Survivor Electrified Lockset
EA195/26D
American Lever
Shown
EA295 Crescent Lever
Storeroom F86 Function
Shown
195 FEL / FEU
American Lever
Shown
Bridge Rectifier
MARKS # EA195, EA295, EA395, EA495
REX LEVERSETS
CONVENTIONAL CORE
IC CORE❋
FUNCTION ANSI # DESCRIPTION
FINISH
GROUPS
F
FEL
FEU
RF
RFEL
RFEU
STOREROOM
ELECTRICALLY
LOCKED
ELECTRICALLY
UNLOCKED
F86
—
—
Latch by lever inside.
Outside lever always locked.
Outside always locked electrically.
Open by key outside, switch or loss of power.
Latch by lever inside.
Outside always locked until unlocked by key or electrically energized.
Latch by lever inside.
3, 4,
10, 10B,
26, 26D
MARKS # 195, 295, 395, 495
ELECTRIFIED LEVERSETS
CONVENTIONAL CORE
IC CORE❋
FUNCTION DESCRIPTION
FINISH
GROUPS
FEL
FEU
RFEL
RFEU
ELECTRICALLY
LOCKED
ELECTRICALLY
UNLOCKED
Outside always locked electrically.
Open by key outside, switch or loss of power.
Deadlocking latch by lever inside. Lever only.
Outside always locked until unlocked by key or electrically energized. Deadlocking latch by lever inside. Lever only.
3, 4,
10, 10B,
26, 26D
S
TANDARD
F
EATURES
• Backset: 2-3/4"; 2-3/8", 3-3/4" & 5" Optional
• Latch #1834, Front: 1-1/8" x 2-1/4"; Throw: 9/16"; Stainless steel nose
• Levers: Solid cast Zamac w/ 1/2" return
• Rose: Thru-bolted, 3-7/16" dia., spring loaded 2-#10 thru-bolts
• Strike: #1135, 4-7/8" ASA curved lip
• Door thickness: 1-5/8" to 1-7/8" (For 1-3/8" door use K1704 spacer.)
• Cylinder: MARKS “C” keyway, 6 pin w/ 2 keys or IC Core housing
• Electrified functions - 100% duty cycle, 24V/AC supplied with bridge rectifier;
24V/DC, .21 Amps
• 12V/DC Optional, Contact factory for additional options
• Request to Exit Switch: Single pole, double throw, 3 amp,125 AC, wired either normally open or normally closed (REX Switch is not standard on electrified leverset)
• Features “The Clutch”
• UL Listed, 3 hour fire rated
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
❋
Standard & HI-SECURITY™ IC Core Models:
Interchangeable Core models for 6 or 7 pin cores (not included).
Accepts: Marks, Marks HI-SECURITY™, Medeco
®
, KeyMark™, Falcon,
Schlage
® small format & Best
®
. IC Core Tailpieces ARE Included.
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 9
CCoonnttrraacctt
LINE
1120 S
ERIES
C
YLINDRICAL
K
NOBSETS
& 1150 S
ERIES
C
YLINDRICAL
L
EVERSETS
ANSI 156.2 G
RADE
2
C
ONTRACT
L
INE
Marks USA Contract Line was designed for the discriminating buyer on a budget with real best-of-class features. The 1120 Series is a Grade 2 Key-in-Knob lockset available in polished brass or stainless steel finish in either 2-3/8" or 2-3/4" backset.
The 1150 Series is a Grade 2 Key-in-Lever lockset that has individual springs in each rose to support each lever for virtually no sagging whatsoever. The 1150 has removable through-bolts and a retractor that will receive either a Grade 1 or Grade 2 latch.
The 1150 comes standard with a “C” keyway cylinder and is available prepped for small format interchangeable core.
1120AB/32D Series
Cylindrical
Knobset Shown
MARKS # 1120
AB
F
L
N
DO
ENTRANCE
STOREROOM
PRIVACY
PASSAGE
1/2 DUMMY
S
TANDARD
F
EATURES
• Knobs: 2" Diameter ball; Roses: 3" Diameter
• Backset: 2-3/8" Standard, 2-3/4" optional
• Latch: Stainless steel Latch Bolt, 1/2" throw,
1" x 2-1/4" front on 2-3/8" backset,
1-1/8 x 2-1/4" front on 2-3/4" backset
C
AN
B
E
A
SSEMBLED
W
ITH
O
R
W
ITHOUT
T
HRU
-
STUDS
FUNCTION ANSI #
F109
F86
F76
F75
—
FINISH GROUPS
3, 32D
• Cylinder: Marks “C” keyway, 6 pin w/2 keys
• Strike: 2-3/4" “T” standard, 4-7/8" ASA optional
• Door Thickness: 1-3/8" to 1-3/4"
• Life Test: 400,000 cycles minimum
• ANSI Test: Meets ANSI A156.2, Grade 2
• Fire Test: UL Listed, ANSI Grade 2, 3 hour fire rated
• Warranty: 1 Year Limited Mechanical Warranty
1150F/26D Series
Cylindrical
Leverset Shown
Page 10
AB
F
S
L
N
DT
COMM. CYLINDER
MARKS # 1150
IC CORE CYLINDER❋
RAB
RF
RS
—
—
—
FUNCTION
ENTRANCE
STOREROOM
CLASSROOM
PRIVACY
PASSAGE
FULL DUMMY
ANSI #
F109
F86
F84
F76
F75
—
FINISH GROUPS
3, 4,
10B, 26D
S
TANDARD
F
EATURES
• Levers: American Design
• Roses: 3-5/16" Diameter
• Backset: 2-3/4" Standard; 2-3/8", 3-3/4", 5" available
• Latch: Stainless steel Latch Nose, 1/2" throw,
1-1/8 x 2-1/4" front on 2-3/4" backset,
1" x 2-1/4" front on 2-3/8" backset
• Cylinder: Marks “C” keyway, 6 pin w/2 keys
• Handing: Reversible, Non-handed
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
• Strike: 4-7/8" ASA standard, 2-3/4" “T” optional
• Door Thickness: 1-3/8" to 1-3/4"
• Studs: Removable thru-bolts • Over-Under
• Life Test: 1,000,000+ cycles
• ANSI Test: Exceeds ANSI A156.2, Grade 2
• Fire Test: UL Listed, ANSI Grade 2, 3 hour fire rated
• Warranty: 5 Year Limited Mechanical Warranty
INISHES ARE EXCLUDED FROM THIS WARRANTY
❋
Standard & HI-SECURITY™ IC Core Models:
Interchangeable Core models for 6 or 7 pin cores
(not included).
Accepts: Marks, Marks HI-SECURITY™, Medeco
®
,
KeyMark™, Falcon, Schlage
® small format & Best
IC Core Tailpieces ARE Included.
®
.
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
CYLINDRICAL LEVER FUNCTIONS
ANSI 156.2 G
RADES
1 & 2
C
YLINDRICAL
L
EVER
F
UNCTIONS
ANSI # CODE
F75 PASSAGE:
Latch by lever either side.
F76 PRIVACY:
Latch by lever either side unless outside lever locked by push-button from inside. Outside unlocks by turning inside lever, outside emergency turn or closing door.
F76 (MOD.) HOSPITAL/PRIVACY:
Latch by lever either side unless outside lever locked by push-button from inside. Outside unlocks by turning inside lever, outside emergency turn-knob or closing door.
F77 PATIO:
Deadlocking latch by lever either side unless outside lever locked by push-button inside. Unlocks by turning inside lever or closing door.
F80 COMMUNICATION:
Key both sides. Locks or unlocks either lever independent of the other. Deadlocking latch.
F81 ENTRY:
Deadlocking latch bolt by lever either side except when outside locked by turn-button inside. When outside locked, key outside or lever inside opens lock. Turn-button operated manually.
F82A ENTRY:
Deadlocking latch by lever either side. Outside locked by push-button inside. When outside locked by push-button inside, key opens lock, unlocks push-button. Inside lever always opens latch. Closing door does not release push-button.
F83 EXIT:
Deadlocking latch by lever either side except when outside locked by turn-button inside. Inside lever always opens latch.
Turn-button operated manually.
MARKS FUNCTION ANSI # CODE
N
F90 CORRIDOR:
L
Deadlocking latch by lever either side unless outside locked by key or inside push-button. Unlock by key, turning inside lever or closing door.
LK
F90 (MOD.) HOSPITAL/PRIVACY:
Deadlocking latch by lever either side unless outside locked by lever or inside push-button. Unlock by turn-knob, turning inside lever or closing door.
MARKS FUNCTION
T
TK
F91 STORE DOOR (95 Series Leverset ONLY):
Deadlocking latch by lever either side except when both levers are locked by key from either side.
GB
P
DC
A
B
AQ
F92 SERVICE STATION LOCK:
Deadlocking latch by lever either side unless outside locked by key or inside push-button. Unlock by key, turning inside lever or closing door, except when slotted push-button is turned in locked position. Inside lever always opens latch.
F93 HOTEL:
Deadlocking latch by lever inside. Outside lever always locked.
Inside push-button projects indicator on cylinder face shutting out all keys except emergency key. Turning inside lever or closing door releases push-button.
F109 ENTRY:
Outside locked by pushing turn-button inside. Key outside opens lock. Rotating inside lever releases button and outside lever. By pushing and turning inside button, outside lever remains locked.
Deadlocking latch.
F110 CLASSROOM INTRUDER:
Deadlocking latch by lever either side, except when outside locked by key inside. Key outside locks or unlocks outside.
Inside always open
DUMMY TRIM:
Outside only, rigid.
BS
H
AB
DB
DO
F84 CLASSROOM:
Deadlocking latch by lever inside.
Outside lever locked or unlocked by key.
S
DUMMY TRIM:
Both sides, rigid.
DT
F86 STOREROOM:
Deadlocking latch by lever inside, key outside.
Outside lever always locked.
F87 INSTITUTION:
Both levers always locked.
Deadlocking latch by key both sides.
F
DW
F111 COMMUNICATING PASSAGE:
Blank outside. Deadlocking latch by lever inside.
F112 COMMUNICATING STOREROOM:
Blank outside. Deadlocking latch by key only.
Lever always locked.
F113 COMMUNICATING CLASSROOM:
Blank outside. Inside lever locked or unlocked by key.
Deadlocking latch.
NB
FB
SB
F88 VESTIBULE:
Deadlocking latch by lever either side, except when outside lever locked by key inside. Key outside retracts deadlocking latch. Inside always open.
F89 EXIT:
Deadlocking latch by lever inside. Outside always locked.
DA
FQ
ELECTRICALLY LOCKED - FEL:
Outside always locked electrically. Open by key outside, switch or loss of power. Deadlocking latch by lever inside. Lever only.
ELECTRICALLY UNLOCKED - FEU:
Outside always locked until unlocked by key or electrically energized. Deadlocking latch by lever inside. Lever only.
FEL
FEU
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 11
DEFENDER SERIES
T
UBULAR
D
EADBOLTS
& C
YLINDRICAL
C
ARTRIDGE
D
EADLATCHES
D
EFENDER
S
ERIES
D
EADBOLTS
& D
EADLATCHES
In addition to our tubular style deadbolts, Marks USA has now developed a cylindrical cartridge deadlatch (145 Series). The result is an easy to install deadlocking latch with a stainless steel nose and 9/16" throw. The Defender series are available in both conventional as well as IC core cylinder models.
130M/32D Tubular Deadbolt Shown
MARKS # 130
COMMERCIAL
CYLINDER
K
L
M
S
X
S
TANDARD
F
EATURES
• Bolt: 1" throw
• Unitized assemblies for 2-1/8" bore
• Strike: #1335, 2-3/4" x 1-1/8" strike
• Door thickness: 1-5/8" to 1-7/8"
IC CORE
CYLINDER❋
RK
RL
RM
RS
—
DESCRIPTION
CYLINDER x TURNPIECE
COMMUNICATING SINGLE CYL
DOUBLE CYLINDER
CLASSROOM
TURNPIECE x BLANK PLATE
• Cylinder: MARKS “C” keyway, 6 pin w/ 2 keys
• 2-3/8" Backset
• Latch: 1" x 2-1/4" front
ANSI #
E0151
E0161
E0141
E0171
E0191
FINISH
GROUPS
3, 10, 10B,
26D, 32, 32D
❋
Standard & HI-SECURITY™ IC Core Models:
Interchangeable Core models for 6 or 7 pin cores
(not included).
Accepts: Marks, Medeco KeyMark™, Falcon & Best®.
IC Core Tailpieces ARE Included.
145K/32D Cylindrical Cartridge Deadlatch Shown
MARKS # 145
COMMERCIAL
CYLINDER
K
L
M
X
KL
S
TANDARD
F
EATURES
• Series 1 cylindrical cartridge
• Latch: Grade 1, 9/16" throw
• 2-3/4" Backset
• Unitized assemblies for 2-1/8" bore
• Strike: #1136, 2-3/4" strike
IC CORE
CYLINDER❋
RK
RL
RM
—
RKL
DESCRIPTION
CYLINDER x TURNPIECE
COMMUNICATING SINGLE CYL
DOUBLE CYLINDER
TURNPIECE x BLANK PLATE
CYLINDER BY LEVER
• Door thickness: 1-3/8" to 2-3/8"
• Cylinder: MARKS “C”keyway, 6 pin w/ 2 keys
• Latch: 1-1/8" x 2-1/4" front
• UL Listed, 3 hour fire rated
ANSI #
E0121
E0131
E0111
—
—
FINISH
GROUPS
3, 10, 10B,
26D, 32, 32D
❋
Standard & HI-SECURITY™ IC Core Models:
Interchangeable Core models for 6 or 7 pin cores
(not included).
Accepts: Marks, Medeco KeyMark™, Falcon & Best®.
IC Core Tailpieces ARE Included.
Page 12
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
DEFENDER SERIES
T
UBULAR
D
EADBOLTS
& C
YLINDRICAL
C
ARTRIDGE
D
EADLATCHES
D
EFENDER
S
ERIES
U
NIQUE
F
EATURES
P
ROTECTIVE
S
TEEL
S
HUTTERS
The Defender's steel shutters on the interior assembly conceal and protect the two hardened 1/4" mounting bolts which thru-bolt through the latch assembly.
130M Shown 130M Shown
S
IMPLE
F
AST
A
SSEMBLY
• Defender is designed for quick easy installation
• One piece assemblies
• Unitized exterior and interior trim assemblies have no loose components
• Tailpiece orientation and latch positioning,
required on other deadbolts, is unnecessary
• Trim and latch are fully reversible and can be assembled randomly
130K Shown
Standard Door Prep: 2-1/8" bore
“S” Function Door Prep: 1-1/2" bore
O
NE
C
YLINDER
F
ITS
A
LL
The Defender utilizes standard key-in-knob cylinders; same as MARKS cylindrical locksets.
This important feature eliminates extra inventory of special cylinders making the key-in-knob cylinder inventory more versatile.
• Provides access to largest variety of keyways
• Models also available for 6 or 7 pin IC cores (Best™ size)
E
ASY
R
ETROFIT
D
EADBOLT
• Fits standard 2-1/8" diameter door prep
• The Defender offers a choice of tailpieces for MARKS & other OEM cylinders
• Fits 1-1/4" to 2-1/4" thick doors (Normally supplied for 1-3/4" door)
• Marks USA adapter tailpieces available for OEM conventional & IC Core cylinders
1353
1403
1355-L
1354
1405
1354-2M
F1403-C
1355
A1354-2C
F 1405-C
1353-L
A1354-2S
1403-L
1354-L
1405-L
Conventional IC Core
PART # TAILPIECES FOR 130 SERIES DEADBOLTS
1353
1354
1-1/4" to 1-1/2"
1-5/8" to 1-7/8"
1355 2" to 2-1/4"
1353-L 1-3/8" to 1-1/2"
1354-L 1-5/8" to 1-7/8"
1355-L 2" to 2-1/4"
MARKS 1982
LORI 1539 / ILCO 705
1354-2M 1-5/8" to 1-7/8"
MEDECO®
#20-200052 / #20-0700
A1354-2C 1-5/8" to 1-7/8"
A13542-S 1-5/8" to 1-7/8"
CORBIN® 2000-34
SCHLAGE®
PART # TAILPIECES FOR 145 SERIES DEADLATCHES
1403
1405
1-5/8" to 1-7/8"
2" to 2-1/4"
F1403-C 1-5/8" to 1-7/8"
F1405-C 2" to 2-1/4"
1403-L 1-5/8" to 1-7/8"
1405-L 2" to 2-1/4"
MARKS
SCHLAGE®
LORI / ILCO
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 13
CUSTOM LOCKSET DIVISION
W
E
M
AKE
L
OCKSETS
T
O
S
UIT
Y
OUR
N
EEDS
A
BOUT
M
ARKS
USA
MARKS USA was established in 1977 to serve a growing demand for a mortise lock manufacturing company who would satisfy the needs of an expanding market. Since then, the product line has grown to include residential and commercial locksets to meet and exceed the most stringent UL and BHMA/ANSI specifications. In 1989, the Custom Lockset Division was created to accommodate customers with special requirements of either lock function or design. Custom locksets have been developed for municipal and commercial applications as shown. These are various custom locksets developed to accommodate our customers needs.
This is only a sampling of our solutions. We at the Custom Lockset Division welcome the opportunity to respond to special applications requiring a custom engineered lock product. We look forward to the challenge.
Designed for
Trump Tower
Chicago, IL
Designed for
The Plaza
New York, NY
Designed for
The Barbizon
New York, NY
Designed for The Mark Hotel
New York, NY
Designed for The Lucida
New York, NY
Designed for The Georgica
New York, NY
Designed for The Stanhope
New York, NY
Page 14
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
SS55 SERIES
I
NSTITUTIONAL
L
IFE
S
AFETY
M
ORTISE
L
OCKSETS
ANSI 156.13 G
RADE
1
SS55 S
ERIES
I
NSTITUTIONAL
L
IFE
S
AFETY
L
OCKSETS
Marks USA Custom Lock Division has developed ANSI Grade 1 Institutional Life Safety Locksets to address Managed Liability,
Accident Prevention, Life Safety and Security in Behavioral Health Care Institutions. The shape and construction of the SS55 Series
Locksets are designed to restrict the attachment of lines, laces, etc. to door knobs. In addition, with the knobs recessed into the rosettes, the chance of capturing a line between the knob and rosette is substantially eliminated.
MARKS #
5 & 55 SS55
FUNCTION
COMM.
CYL.
IC CORE
CYL.❋
KEYED SINGLE CYLINDER, NO DEADBOLT
D
DW
E
EW
J
JM, JR
GL
EL
EU
RD
RDW
RE
REW
RJ
RJM, RJR HOSPITAL
RGL
REL
REU
OFFICE VEST.
VESTIBULE
OFFICE
STOREROOM
CLASSROOM
INSTITUTIONAL PRIVACY
ELECTRICALLY LOCKED
ELECTRICALLY UNLOCKED
KEYED SINGLE CYLINDER, WITH DEADBOLT
A
B
F
FS
FW
FD
H
LH
RA
RB
RF
RFS
RFW
RFD
RH
RLH
ENTRANCE
ENTRANCE
DORMITORY
DORMITORY
DORMITORY
APARTMENT
HOTEL
SPECIAL PRIVACY
KEYED DOUBLE CYLINDER, NO DEADBOLT
G
GC
GG
RG
RGC
RGG
APARTMENT
INTRUDER LATCHBOLT
CLASSROOM SECURITY
GR RGR
CLASSROOM SECURITY w/HOLDBACK
WW RWW INSTITUTIONAL
KEYED DOUBLE CYLINDER, WITH DEADBOLT
AC
C
FC
FA
FX
RAC
RC
RFC
RFA
RFX
ENTRANCE
STOREROOM
INTRUDER DEADBOLT
DORMITORY
DORMITORY
KEYLESS
N
L
LF
LJ
EX
— PASSAGE
— BATHROOM
— PRIVACY
— PRIVACY
— EXIT
DUMMY TRIM
DI
DO
DT
—
—
—
DUMMY TRIM INSIDE
DUMMY TRIM OUTSIDE
FULLY DUMMY
ANSI #
F04
F07
F05
F06
F26
F08, F10
F21
F12
F13
F20
F15
F09
F32
F30
F35
F14
F34
F11
F33
F01
F02
F19
F22
F31
FINISH
GROUPS
32D
❋
Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco
®
,
KeyMark™, Falcon, Schlage
® small format & Best
®
. IC Core Tailpieces ARE Included.
5SS55FD/32D Mortise
Lockset Shown
S
TANDARD
F
EATURES
P
ERFORMANCE
S
PECIFICATIONS
Life Test: 1,500,000 cycles minimum.
ANSI Test: Meets or exceeds all operational and security tests of ANSI specifications A156.13-2005 for series 5000, Grade 1.
Fire Test: UL Listed, 3 hour fire rated.
T
RIM
S
PECIFICATIONS
Exterior & Interior Trim:
• Solid stainless steel interior and exterior tapered knobs recessed into thru-bolted roses
• Specially designed finger indented safety knobs with recessed grip and ergonomically designed integral grooved turn knob for elderly and handicapped access (patent pending)
• Needle bearings ensure smoothness of operation
Cylinder: Solid brass cylinders with solid brushed chrome security collars. Optional HI-SECURITY™ available.
Strike: 4-7/8" curved lip stainless steel w/tamperproof screws.
Door Thickness: 1-3/4" standard. Extended range available.
Door Prep: ANSI A115.1 lock face cutout, with 2-1/8" through hole for knob/rose assembly.
Backset: 5 Series: 2-3/4" standard, 55 Series: 2-1/2" optional
Lock Front: Adjustable bevel steel backplate 1-1/4" x 8" x 7/64" thick.
Cover plate 1/16" thick with tamper proof screws.
Latch: Solid stainless steel with antifriction latch lever, 3/4" throw
(reversible).
Aux. Deadlatch: 1/2" throw, (reversible).
Case: Stamped steel 3/32" thick, zinc dichromate finish.
Hubs: Steel, 9/32" on diamond, 5/16" on square with security separator.
Hub Lock Arm: (to lock hub) Steel 1/8" thick.
Spindles: Independent spring-loaded spindles.
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 15
SS55 SERIES
I
NSTITUTIONAL
L
IFE
S
AFETY
C
YLINDRICAL
L
OCKSETS
ANSI 156.2 G
RADE
1
& M
ORTISE
D
EADLOCKS
ANSI 156.5 G
RADE
1
S
TANDARD
F
EATURES
1SS55K/32D Shown
P
ERFORMANCE
S
PECIFICATIONS
Life Test: 1,500,000 cycles minimum.
ANSI Test: Meets or exceeds all operational and security tests of
ANSI specifications A156.2-2003 for series 1000, Grade 1.
Fire Test: UL Listed, 3 hour fire rated.
1SS55N/32D Shown
MARKS # 1 SS55
COMM.
CYLINDER
IC CORE
CYLINDER❋
FUNCTION
KEYED SINGLE CYLINDER, WITH DEADBOLT
K
KEYLESS
RK
ANSI #
CYLINDER x KNOB E0121
N — PASSAGE F75
FINISH
GROUPS
32D
❋ Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco
®
,
KeyMark™, Falcon, Schlage
® small format & Best
®
. IC Core Tailpieces ARE Included.
T
RIM
S
PECIFICATIONS
Exterior & Interior Trim:
• Solid stainless steel interior and exterior tapered knobs recessed into thru-bolted roses
• Specially designed finger indented safety knobs with recessed grip and ergonomically designed integral grooved turn knob for elderly and handicapped access (patent pending).
• Needle bearings ensure smoothness of operation
1SS55K Cylindrical Deadlatch Lockset: ANSI E0121 Cylinder x Knob
Latch by knob inside, key outside.
Strike: #1136, 2-3/4" “T” strike; #1135 4-7/8" ASA strike optional
Door Prep: ANSI 115.2
Latch: ANSI 156.2, Grade 1, 3 Hour fire rated
Door Thickness: 1-3/4"
Backset: 2-3/4" Backset; 3-3/4" and 5" backsets also available
Latch Face: 1-1/8" x 2-1/4" with tamper proof screws
Cylinder: Solid brass cylinder, 6-pin, “C” keyway;
Optional HI-SECURITY™ cylinders available
1SS55N Cylindrical Lockset: ANSI F75 Passage
Latch by knob either side, always open.
Strike: #1136, 2-3/4" “T” strike
Door Prep: ANSI 115.2
Latch: ANSI 156.2, Grade 1, 3 Hour fire rated
Backset: 2-3/4" backset standard, 2-3/8" backset optional;
3-3/4" and 5" backsets also available
Latch Face: 1-1/8" x 2-1/4" with tamper proof screws
Latch Throw: 9/16"
31SS55K/32D Mortise Deadlock
Shown
K
S
MARKS # 31SS55
COMM.
CYLINDER
IC CORE
CYLINDER❋
FUNCTION
KEYED SINGLE CYLINDER, WITH DEADBOLT
RK
RS
CYLINDER x KNOB
CLASSROOM
ANSI #
E06071
E06091
FINISH
GROUPS
32D
❋
Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco
®
,
KeyMark™, Falcon, Schlage
® small format & Best
®
. IC Core Tailpieces ARE Included.
S
TANDARD
F
EATURES
P
ERFORMANCE
S
PECIFICATIONS
Life Test: 1,500,000 cycles minimum.
ANSI Test: Meets or exceeds all operational and security tests of
ANSI A156.5-2001 for series 31, Grade 1.
Fire Test: UL Listed, 3 hour fire rated.
T
RIM
S
PECIFICATIONS
Interior Trim:
Solid stainless steel interior trim including finger indented safety knobs which recess into solid brass through-bolted roses.
Series 31 Deadlock Specifications ANSI E06071 Cylinder x Turnpiece
Deadbolt by outside key. Interior safety knob will retract but not project deadbolt.
Backset: 2-3/4"
Strike: #4035 1-1/8" x 3-1/8" standard,
#3135 4-7/8" x 1-1/4" optional
Bolt Throw: 1" Stainless steel with hardened roll pins
Case: Stamped steel
Front: 1-1/16" x 4-5/8" adjustable bevel
Cylinder: Solid brass cylinder, 6-pin,“C” keyway.
Optional HI-SECURITY™ cylinders available.
Page 16
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
PD SERIES
I
NSTITUTIONAL
L
IFE
S
AFETY
H
OSPITAL
P
USH
/P
ULL
P
ADDLESETS
C
YLINDRICAL
ANSI 156.2 G
RADE
1 & M
ORTISE
ANSI 156.13 G
RADE
1
PD S
ERIES
I
NSTITUTIONAL
L
IFE SAFETY
H
OSPITAL
P
USH
/P
ULL
P
ADDLESETS
Our unique hospital push/pull cylindrical and mortise paddlesets feature universal assemblies where you can choose to install handles to point two-up or two-down or one-up and one-down. No handing needed. Marks USA design innovation also produced an improved short angle design meaning easier hands free push/pull for the user. Great retrofit, superior for new construction!
MARKS # 1 PD
KEYLESS
N
FUNCTION
PASSAGE
ANSI #
F75
FINISH GROUPS
32D
1PDN/32D Cylindrical Paddleset Shown
MARKS #
5 & 55 PD
FUNCTION
A
B
F
FS
FW
FD
H
LH
KEYED SINGLE CYLINDER, NO DEADBOLT
D
DW
OFFICE VEST.
VESTIBULE
E
EW
J
JM, JR
GL
EL
OFFICE
STOREROOM
CLASSROOM
HOSPITAL
INSTITUTIONAL PRIVACY
ELECTRICALLY LOCKED
EU ELECTRICALLY UNLOCKED
KEYED SINGLE CYLINDER, WITH DEADBOLT
ENTRANCE
ENTRANCE
DORMITORY
DORMITORY
DORMITORY
APARTMENT
HOTEL
SPECIAL PRIVACY
KEYED DOUBLE CYLINDER, NO DEADBOLT
G APARTMENT
GC
GG
GR
WW
INTRUDER LATCHBOLT
CLASSROOM SECURITY
CLASSROOM SECURITY w/HOLDBACK
INSTITUTIONAL
KEYED DOUBLE CYLINDER, WITH DEADBOLT
AC
C
FC
FA
FX
KEYLESS
ENTRANCE
STOREROOM
INTRUDER DEADBOLT
DORMITORY
DORMITORY
N
L
LF
PASSAGE
BATHROOM
PRIVACY
LJ
EX
PRIVACY
EXIT
DUMMY TRIM
DI DUMMY TRIM INSIDE
DO
DT
DUMMY TRIM OUTSIDE
FULLY DUMMY
ANSI #
F13
F20
F15
F01
F02
F19
F22
F31
F35
F14
F34
F11
F33
F04
F07
F05
F06
F26
F08, F10
F21
F12
F09
F32
F30
FINISH
GROUPS
32D
5PDN/32D Mortise Paddleset Shown
L
❋ Standard & HI-SECURITY™ IC Core Models: Interchangeable Core models for 6 or 7 pin cores (not included). Accepts: Marks, Marks HI-SECURITY™, Medeco
®
,
KeyMark™, Falcon, Schlage
® small format & Best
®
. IC Core Tailpieces ARE Included.
S
TANDARD
F
EATURES
Cylindrical:
• Backset: 2-3/4" standard, 2-3/8" and 5" optional
• Strike: #1136, 2-3/4" “T” strike; #1135 4-7/8" ASA strike optional
Mortise:
• Backset: 5 Series 2-3/4", 55 Series 2-1/2"
• Strike: #9035, 4-7/8" ASA curved lip strike
IFETIME
M
ECHANICAL
W
ARRANTY
• F
• Door Thickness: 1-3/4", self adjusting for thicker doors
• ANSI-A156.2, Grade 1
• Lead lining and engraving available
• ADA Compliant • Non-Handed
• Government standard #161
INISHES ARE EXCLUDED FROM THIS WARRANTY
• Functional, modern design with variable mounting positions
• Short throw angle allows for easy push/pull action to open doors even when hands are not free
• Standard 32D finish, consult factory for available finishes
• Universal assemblies can be push/pull vertical up or down
• Easily reversible configuration for push or pull styles
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 17
I-QWIK SERIES ELECTRONIC ACCESS CONTROL
N
O
-N
ONSENSE
A
CCESS
C
ONTROL
R
IGHT
O
UT
O
F
T
HE
B
OX
!
IQ10 Cylindrical Model
Shown with American Lever
INSTALLATION
PROGRAMMING
MARKS # LOCKSET TYPE # OF USERS
IQ10
Cylindrical Lockset
IQ20
IQ70
Mortise Lockset
Rim Exit Device Interface
Adapter plates operate most manufacturers Rim Exit Devices
Adapter plates for Mounting Exit Devices are sold separately, see page 21.
S
TANDARD
F
EATURES
• CableGard
TM
protects wires for easy installation
• Standard ANSI door prep with one additional hole
• Pre-programmed code
• Keypad programmable
• 160 User codes
• Temporary user codes
• Passage mode
• Pin only mode
• Double code entry for maximum security
• Secretaries button interface
• 16 Digit tactile metal keypad
• Durable black powder coat finish with 26E American levers
• Weatherproof standard
• Audible & visible entry indicator
• Audible low battery alert
160
FINISH GROUPS
19
Black Powder Coat with
26E American Levers
• 4 “AA” batteries, 95,000 operations
• Easy installation
L
OCKSET
S
PECIFICATIONS
IQ10 C
YLINDRICAL
L
OCKSET
Door Thickness: 1-3/4" standard
Handing: Non-handed
Key Override: Marks “C” keyway, 6 pin w/2 keys,
IC Core optional
Lock Body: Cylindrical “Survivor” featuring the “Clutch” for trouble free service
Latch: Grade 2, 2-3/4" backset, 1/2" throw,
3 Hour UL fire rated
Strike Plate: 2-3/4" “T” strike
IQ20 M
ORTISE
L
OCKSET
Door Thickness: 1-3/4" standard
Handing: Field reversible
Key Override: 1-1/8" Mortise cylinder, 6 pin w/2 keys
Lock Body: Grade 1, Series 5, 2-3/4" backset,
3/4" anti-friction latch, 3 Hour UL fire rated
Auxiliary Latch: 1/2" throw
Bolt Throw: 1" (Optional deadbolt functions - Consult factory)
Clutch: The “Clutch” for trouble free service
Strike Plate: 4-7/8" ASA standard
IQ70 R
IM
E
XIT
D
EVICE
I
NTERFACE
Door Thickness: 1-3/4" standard
Handing: Non-handed
Key Override: 1-1/8" Mortise cylinder,
6 pin w/2 keys
Clutch: The “Clutch” for trouble free service
Adapter plates operate most manufacturers Rim Exit Devices.
Adapter plates for Mounting Exit Devices are sold separately, see page 21.
Page 18
L
IFETIME
M
ECHANICAL
W
ARRANTY
; 2 Y
EAR
E
LECTRONIC
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
I-QUE SERIES ELECTRONIC ACCESS CONTROL
S
TAND
A
LONE
A
CCESS
C
ONTROL
IQ2K/26D Mortise
Model Shown with
Crescent Lever & i-Dat MARK2 USB Unit with U3 Memory Stick
MARKS # LOCKSET TYPE
# OF
USERS
AUDIT TRAIL
EVENTS
FINISH GROUPS❖
IQ1K
Cylindrical Lockset
IQ2K
IQ7K
Mortise Lockset
Rim Exit Device Interface
Adapter plates operate most manufacturers Rim Exit Devices
Adapter plates for Mounting Exit Devices are sold separately, see page 21.
IQ_K S
TANDARD
F
EATURES
• CableGard
TM
protects wires for easy installation
• Weatherproof standard
• Shielded electronics
• 16 Digit tactile metal keypad
• 320 User capability
• 1600 Event audit trail
• 160 Scheduled events
• 32 Programmable holidays
• Real time clock
• Multiple entry codes for max security
• Full scheduling features
• Pin only
• Terminator on/off
• Built in relay
• 3-10 Digit user code
• Temporary user codes
• First manager to arrive
• Panic alarm interface
• Secretaries button interface
• Fire tower lock function
320 1600
19
Black Powder
Coat
26D
Satin Chrome
Plated
❖
Additional Finishes, Consult Factory.
• Programmable by keypad or by use of the i-Dat software package
(See page 22 for more information)
• On-the-door upgradeable memory
• Privacy mode (input to lockout keypad entry optional, consult factory)
• Scheduled/Manual passage mode
• Audible & visible entry indicator
• Audible low battery alert
• 4 “AA” batteries included
• HI-SECURITY™ Cylinder Standard
L
OCKSET
S
PECIFICATIONS
IQ1K C
YLINDRICAL
L
OCKSET
Door Thickness: 1-3/4" standard
(Spacer kit available for thinner doors)
Handing: Non-handed
Key Override: Marks HI-SECURITY™ Cylinder std.
Marks “C” Keyway, 6 pin w/2 keys,
IC Core optional
Lock Body: Grade 1 Cylindrical “Survivor”
Latch: Grade 1, 2-3/4" backset, reversible with 9/16" throw,
3 Hour UL fire rated
Clutch: The “Clutch” for trouble free service
Strike Plate: 4-7/8" ASA strike
IQ2K M
ORTISE
L
OCKSET
Door Thickness: 1-3/4" standard
(For thicker doors consult factory; Spacer kit available for thinner doors)
Handing: Field reversible
Key Override: Marks HI-SECURITY™ Cylinder std.,
1-1/8" Mortise cylinder, Marks “C” Keyway,
6 pin w/2 keys, or 1-3/8" IC Core housing optional
Lock Body: Grade 1, Series 5, 2-3/4" backset,
3/4" anti-friction latch, 3 Hour UL fire rated
Auxiliary Latch: 1/2" throw
Bolt Throw: 1"
(Optional deadbolt functions - Consult factory)
Hubs: Steel, 5/16" square with security separator
Clutch: The “Clutch” for trouble free service
Strike Plate: 4-7/8" ASA standard
IQ7K R
IM
E
XIT
D
EVICE
I
NTERFACE
Door Thickness: 1-3/4" - 2-1/4" standard
(For thicker doors consult factory)
Handing: Non-handed
Key Override: Marks HI-SECURITY™
Cylinder std., 1-1/8" Mortise cylinder, Marks “C” Keyway,
6 pin w/2 keys, or 1-3/8"
IC Core housing optional
Clutch: The “Clutch” for trouble free service
Adapter plates operate most manufacturers Rim Exit Devices.
Adapter plates for Mounting Exit Devices are sold separately, see page 21.
L
IFETIME
M
ECHANICAL
W
ARRANTY
; 2 Y
EAR
E
LECTRONIC
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 19
I-QUE SERIES ELECTRONIC ACCESS CONTROL
P
ROX
S
TAND
A
LONE
A
CCESS
C
ONTROL
IQ1KP/26D Cylindrical
Proximity Reader
Model Shown with
Crescent Lever, i-Dat MARK2 USB Unit with U3 Memory Stick,
Proximity Card & Keyfob
Page 20
MARKS # LOCKSET TYPE
# OF
USERS
AUDIT TRAIL
EVENTS
FINISH GROUPS❖
IQ1KP
Cylindrical Lockset
IQ2KP
IQ7KP
Mortise Lockset
Rim Exit Device Interface
Adapter plates operate most manufacturers Rim Exit Devices
Adapter plates for Mounting Exit Devices are sold separately, see page 21.
IQ_KP S
TANDARD
F
EATURES
• CableGard
TM
protects wires for easy installation
• Weatherproof standard
• Shielded electronics
• 16 Digit tactile metal keypad
• 3008 User capability
• 1180 Event audit trail
• 1600 Scheduled events
• 56 Programmable holidays
• Real time clock
• Multiple entry codes for max security
• Full scheduling features
• Pin only
• Terminator on/off
• Built in relay
• 3-10 Digit user code
• Temporary user codes
• First manager to arrive
• Panic alarm interface
• Secretaries button interface
• Fire tower lock function
3008 1180
19
Black Powder
Coat
26D
Satin Chrome
Plated
❖
Additional Finishes, Consult Factory.
• Accepts HID cards and fobs in 26, 33 and 37 format
• Programmable by keypad or by use of the i-Dat software package
(See page 22 for more information)
• Privacy mode (input to lockout keypad entry)
• Scheduled/Manual passage mode
• Audible & visible entry indicator
• Audible low battery alert
• 4 “AA” batteries included
• HI-SECURITY™ Cylinder Standard
L
OCKSET
S
PECIFICATIONS
IQ1KP C
YLINDRICAL
L
OCKSET
Door Thickness: 1-3/4" standard
(Spacer kit available for thinner doors)
Handing: Non-handed
Key Override: Marks HI-SECURITY™ Cylinder std.
Marks “C” Keyway, 6 pin w/2 keys,
IC Core optional
Lock Body: Grade 1 Cylindrical “Survivor”
Latch: Grade 1, 2-3/4" backset, reversible with 9/16" throw,
3 Hour UL fire rated
Clutch: The “Clutch” for trouble free service
Strike Plate: 4-7/8" ASA strike
IQ2KP M
ORTISE
L
OCKSET
Door Thickness: 1-3/4" standard
(For thicker doors consult factory; Spacer kit available for thinner doors)
IQ7KP R
IM
E
XIT
D
EVICE
I
NTERFACE
Door Thickness: 1-3/4" - 2-1/4" standard
(For thicker doors consult factory)
Handing: Field reversible Handing: Non-handed
Key Override: Marks HI-SECURITY™ Cylinder std.,
1-1/8" Mortise cylinder, Marks “C” Keyway,
6 pin w/2 keys, or 1-3/8" IC Core housing optional
Lock Body: Grade 1, Series 5, 2-3/4" backset,
3/4" anti-friction latch, 3 Hour UL fire rated
Key Override: Marks HI-SECURITY™
Cylinder std., 1-1/8" Mortise cylinder, Marks “C” Keyway,
6 pin w/2 keys, or 1-3/8"
IC Core housing optional
Auxiliary Latch: 1/2" throw
Bolt Throw: 1"
(Optional deadbolt functions - Consult factory)
Clutch: The “Clutch” for trouble free service
Hubs: Steel, 5/16" square with security separator
Clutch: The “Clutch” for trouble free service
Strike Plate: 4-7/8" ASA standard
Adapter plates operate most manufacturers Rim Exit Devices.
Adapter plates for Mounting Exit Devices are sold separately, see page 21.
L
IFETIME
M
ECHANICAL
W
ARRANTY
; 2 Y
EAR
E
LECTRONIC
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
I-QUE SERIES ELECTRONIC ACCESS CONTROL
R
IM
E
XIT
D
EVICE
S
TAND
A
LONE
A
CCESS
C
ONTROL
IQ7K/26D Rim Exit Device
Interface Model Shown with Crescent Lever & i-Dat MARK2 USB Unit with U3 Memory Stick,
Proximity Card & Keyfob
MARKS # LOCKSET TYPE
FINISH GROUPS❖
IQ70
(i-Qwik)
IQ7K
IQ7KP
Rim Exit Device Interface
Adapter plates operate most manufacturers Rim Exit Devices
Adapter plates for Mounting Exit Devices are sold separately, see below.
19
Black Powder
Coat
26D
Satin Chrome
Plated
❖
Additional Finishes, Consult Factory.
S
TANDARD
F
EATURES
• For the i-Qwik IQ70 standard features and lockset specifications, see page 18.
• For the i-Que IQ7K standard features and lockset specifications, see page 19.
• For the i-Que IQ7KP standard features and lockset specifications, see page 20.
A
DAPTER
P
LATES
Rim exit device interface with a choice of adapter plates to fit most rim exit devices (available separately) are listed below:
DESCRIPTION
Von Duprin 99 Rim Adapter Plate/Detex Advantex 10 Series Rim Adapter Plate
Precision 1100 Rim Adapter Plate
Yale 7100 Rim Adapter Plate/Corbin ED5200 Rim Adapter Plate
Dorma 9300 Rim Adapter Plate
Sargent 8800 Rim Adapter Plate/Arrow 3800 Rim Adapter Plate
Precision 21 Rim Adapter Plate/Precision 2100 Rim Adapter Plate**
Von Duprin 88 - Special Order, Consult Factory
Monarch 18R Exit Device Adapter Plate
** MUST USE PRECISION #BP21 BACKPLATE
PART #
E7071
E7072
E7073
E7074
E7075
E7076
E7077
E7078
L
IFETIME
M
ECHANICAL
W
ARRANTY
; 2 Y
EAR
E
LECTRONIC
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 21
I-QUE SERIES ELECTRONIC ACCESS CONTROL
D
IGITAL
A
CCESS
C
ONTROL
K
EYPAD OR
K
EYPAD WITH
P
ROXIMITY
C
ARD
R
EADER
IQK Digital Access Control Keypad, IQKP Digital Access Control Keypad with
Proximity Card Reader, i-Dat MARK2 USB Unit with U3 Memory Stick Shown with Proximity Card & Keyfob
IQK
IQK IQKP
IQKP
Page 22
MARKS #
IQK
IQKP
LOCKSET TYPE
Digital Access Control Keypad
Digital Access Control Keypad with Proximity Card Reader
# OF USERS
320
3008
S
TANDARD
F
EATURES
• CableGard
TM
protects wires for easy installation
(Wall mounted units ONLY)
• Installs into a standard electrical box or can be wall mounted
• Relay function; 12/24V AC/DC, Max 48 volts @ 3 amps
• Weatherproof standard
• Shielded electronics
• 16 Digit tactile metal keypad
• Fire Tower Function
• Panic alarm interface
• Secretaries button interface
• Privacy Mode (input to lockout keypad entry)
• Scheduled/Manual passage mode
• Audible & visible entry indicator
• Audible low battery alert
• Programmable by keypad or by use of the i-Dat software package
(See page 22 for more information)
• Pin only
• Terminator on/off
• Built-in relay
• Real time clock
• Temporary user codes
• Multiple entry codes for max security
• First manager to arrive
AUDIT TRAIL EVENTS
1600
1180
FINISH GROUPS
19
Black Powder Coat
IQK D
IGITAL
A
CCESS
C
ONTROL
K
EYPAD
:
• 320 Users
• 1600 Event audit
• 3-10 Digit user code
• On-the-door upgradeable memory
IQKP D
IGITAL
A
CCESS
C
ONTROL
K
EYPAD WITH
P
ROXIMITY
C
ARD
R
EADER
:
• 3008 User capability
• Accepts HID cards and fobs in 26, 33 and 37 format
• Access granted by keypad only, card only, or a combination of keypad & card for maximum security
R
EQUIRES
:
• 6V/DC power supply (not supplied) or battery pack (sold separately)
I-DAT MARK2 USB UNIT WITH U3 MEMORY STICK
U
PLOAD
/D
OWNLOAD
M
ODULE
i-Dat MARK2 USB Unit with U3 Memory Stick Shown
DESCRIPTION
i-Dat USB Unit with Memory Stick
MEMORY UPGRADES FOR IQ_K & IQK SERIES
512 Users/2208 Event Audit Trail
864 Users/3124 Event Audit Trail
1504 Users/2520 Event Audit Trail
3008 Users/1180 Event Audit Trail
Additional upgrades available, consult factory.
PART #
EA6200
PART #
U3
U4
U5
U6
S
TANDARD
F
EATURES
I-D
AT
MARK2 USB U
NIT
• NO SOFTWARE TO INSTALL!
All information resides on the U3 Memory Stick
• No administration rights needed to use software
• High security infrared data transmission
• 4 line LCD display shows:
- Lock ID / Lock serial number
- Battery status of lockset on download
- Number of events uploaded & downloaded
• Built-in menus
• Faster communications
• USB enabled
• Power requirements 3V (2 “AA” batteries included)
S
YSTEM
• Works on Windows XP 2000 (service pack 4) & Windows Vista with an available USB Port
• Net framework required (version 2.0 or later)
• Power required: 9V (one 9V alkaline battery included)
• New software modeled after Windows Explorer:
- Minimal learning curve
- Drag and drop capability
- Fully portable; No software to install on PC
- Two step password for added security
- Unlimited time zones
• Easy to read audit trail
L
IFETIME
M
ECHANICAL
W
ARRANTY
; 2 Y
EAR
E
LECTRONIC
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
175 BIO
S
ERIES
B
IOMETRIC
F
INGERPINT
R
EADER WITH
L
EVERSET
175 BIO S
ERIES
Marks new 175 BIO is a hi-tech fingerprint recognition system that eliminates the risk of replication or unauthorized use. This unit is combined with the Marks Grade 2 Cylindrical Survivor Leverset and is available in a 26E Satin Chrome powder coated finish.
Power is supplied to the Fingerprint Reader and Leverset via four “AA” batteries. The 175 BIO unit comes standard for 100 users, and has a 4000 $ event audit trail.
175 Cylindrical Leverset Shown with Biometric Fingerprint Reader
NEW
MARKS #
175 BIO
LOCKSET TYPE
Biometric Fingerprint Reader with Leverset
# OF USERS
100
AUDIT TRAIL EVENTS
4000$
FINISH GROUPS
26E Satin Chrome
Powder Coat
S
TANDARD
F
EATURES
175 C
YLINDRICAL
S
URVIVOR
• American style lever standard
• Grade 2 cylindrical lock body (Uses the proven 175 lock body)
• 1-5/8" - 1-7/8" standard door thickness
• Latch: Grade 2, 2-3/4" backset, 1/2" throw
• 3 Hour UL fire rating
• Strike plate: 2-3/4" “T” strike
• Survivor featuring the “Clutch” system helps to prevent lever droop
• Shipped non-handed
• Key Override: Marks “C” Keyway, 6 pin, 2keys, IC Core optional.
Also Accepts Best®, Falcon, Medeco®, KeyMark™, Schlage®, Corbin & KSP.
❋
Standard & HI-SECURITY™ IC Core Models:
Interchangeable Core models for 6 or 7 pin cores (not included).
Accepts: Marks, Marks HI-SECURITY™, Medeco
®
, KeyMark™, Falcon,
Schlage
® small format & Best
®
. IC Core Tailpieces ARE Included.
B
IOMETRIC
F
INGERPRINT
R
EADER
• 100 User codes standard
• 4 “AA” Batteries; 1 Year life span
• Search Time: Less than 2 seconds
• Reader Type: Optical
• Resolution: 500dpi
• .1% / .001% FRR/FAR
O
PTIONAL
S
OFTWARE
K
IT
$
• Optional Software kit includes optical fingerprint reader and cables that connect your laptop computer to the lockset.
• 4000 Event audit trail
• Runs on Windows 98, 2000 ME & XP & Vista 32 bit
U
NIT COMES WITH
BHMA C
ERTIFIED
, L
IFETIME
M
ECHANICAL
W
ARRANTIED
L
EVERSET
AND A
2 Y
EAR
E
LECTRONIC
W
ARRANTY
L
IFETIME
M
ECHANICAL
W
ARRANTY
; 2 Y
EAR
E
LECTRONIC
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 23
HI-SECURITY™ CYLINDERS
HI-SECURITY™ C
YLINDERS
& S
ECURITY
-M
ATE
™ C
YLINDERS
W
HAT
M
AKES
M
ARKS
HI-SECURITY™ C
YLINDERS
U
NIQUE
?
Marks USA patented HI-SECURITY™ cylinders offer a secondary mechanical locking mechanism that creates resistance to bump and picking attacks. In addition, the design supports a corresponding configuration on the key blank called a
“security wave” (shown below) that supports prevention of unauthorized duplication of keys. The locking principal is adaptable to standard cylinders and large and small format interchangeable cores. Marks USA HI-SECURITY™ keyways and security waves are of proprietary origination. The distribution of key blanks is factory controlled. Multiple keyways and security codes are available.
Assignment is by geographic or customer category type. The Marks USA HI-SECURITY™ pick and bump resistance features are designed with added security in mind for cylinders, cores and key blanks. In addition, patents provide legal protection for patent infringement against those who attempt to produce or manufacture key blanks or cylinders. Marks USA will aggressively defend its patent rights!
C
YLINDER
C
ONFIGURATION
Marks HI-SECURITY™ cylinders are manufactured of brass bar stock. Cylinders are available in a variety of models. In standard construction, there are 1-1/8", 1-1/4", 1-3/8", 1-1/2", and 1-3/4" mortise cylinders. There are a variety of 1" and 1-1/8" combination mortise/rim cylinders, key-in-knob, large format interchangeable specifically for Medeco®, Schlage® locks and Best® type small format interchangeable core models in 6 and 7 pin lengths. Standard and large format cylinders may be ordered with the UL 437
HI-SECURITY™ option for greater drill resistance, Non-UL with the same pick and bump protection and in Security-Mate™
(A standard pin tumbler only cylinder without HI-SECURITY™ features, but matching the same key blank; shown on page 26).
SFIC is currently available in Non-UL model only at this time. There are a variety of keying options available. “Zero-bitted” cylinders are shipped standard with either a factory default security code or are supplied with a specific customer security code. The common pin tumbler section of the cylinder has springs, driver pins and accommodates a key blank cut to zero in all positions.
Page 24
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
HI-SECURITY™ CYLINDERS
HI-SECURITY™ C
YLINDERS
& S
ECURITY
-M
ATE
™ C
YLINDERS
M
ARKS
S
ECURITY
-M
ATE
™ C
YLINDERS
Marks USA Security-Mate™ Cylinders are intended to complement Marks HI-SECURITY™ Cylinder applications. Cylinders may be integrated into a Marks HI-SECURITY™ key system. Driven by dealer and consumer demand for a more economic cylinder solution for interior doors such as closets, where less security is needed but the convenience of carrying a single key is desired, Security-Mate™ is a natural addition to the product line. Security-Mate™ Cylinders are made of quality bar brass with precision tolerances, made in five or six pin configuration and available in Mortise, Mortise-rim Combo and Key-in-Knob cylinder configurations. Only Marks patented
HI-SECURITY™ keys will operate the Security-Mate™ Cylinder.
M
ARKS
HI-SECURITY™
C
YLINDER
S
AME
K
EYWAY
U
SED
I
N
B
OTH
C
YLINDERS
!
M
ARKS
S
ECURITY
-M
ATE
™
C
YLINDER
M
ARKS
USA HI-SECURITY™ K
EY
C
ONTROL
M
ANAGEMENT
P
ACKAGE
1. A Unique Registered, Securely Designed Scalable System: A custom security solution is defined after careful consideration of your people, operational and safety requirements. A quality system plan allows for expansion, eliminating obsolescence and costly replacement as much as possible.
2. A “Standard” Written Key Control Policy: Once you have a registered system, implementation is a critical key to maintaining a secure system. We highly recommend a standard template. We also recommend you issue the Company Key Control Policy when you issue new keys to every employee.
3. Documented Patented Key Control Technology:
Patented lock and key technology is assurance your investment will provide the highest rate of return.
Patents protect you from unauthorized key duplication by preventing the manufacturing of key blanks.
BEWARE: “DO NOT DUPLICATE” OR SIMILAR
WARNING STAMPED ON A KEY IS SIMPLY NOT
ENOUGH PROTECTION!
Key Control
Management Package
Available:
All the documents you need to set up and manage your
HI-SECURITY™
Key System!
4. Record keeping & Capability of Audit:
Each registered system cut key must have unique identification stamped on the bow,
(numbers, letters or symbols). In your “Key Log”, record each key holder with the unique identification number found on the key. Each employee should sign for the key issued with the date noted for the record.
Every key is identified as to each cylinder it will operate.
This knowledge eliminates risk and when keys are found, it is easy to identify the key holder.
5. Process for Retrieving Keys When People Leave the Business: Accounting for all the keys in the system eliminates the need and cost to re-key. By having people sign for the key when issued, and sign out upon return of the key, you are able to take inventory of all cut and assigned keys and assess risk…If you can account for all of the keys in the system, you simply re-issue an existing key number to a new user.
L
IFETIME
M
ECHANICAL
W
ARRANTY
• F
INISHES ARE EXCLUDED FROM THIS WARRANTY
C
RAFTED WITH
P
RIDE IN THE
USA
www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • ©2008, Marks USA
Page 25
Distributed By:
MARKS USA is a manufacturer of
BHMA certified locksets.
Marks USA • 5300 New Horizons Blvd. • Amityville, NY • 11701
631-225-5400 • 800-526-0233 • Fax: 631-225-6136 www.marksusa.com
FAC GDE 11.08

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Thru-bolted trim
- Self adjusting spindles
- Independent lever support springs
- Cast stainless steel with bronze roller bearings
- UL Listed, 3 hour fire rated