Nitto 2012 (Page 1)

Nitto 2012 (Page 1)
MACHINE TOOLS
CONTENTS
Whether you just glance through this booklet or give it an intensive reading, we are sure you'll agree that
NITTO KOHKI's portable hydraulic and electric machines, couplers and pneumatic hand tools are among
the finest precision engineered equipment found today.
Manufacturing
PORTABLE MAGNETIC BASE
AUTOMATIC DRILLING MACHINE
Steel
Fabricating
Welding
Metal Casting & Automotive &
Forging
Ship Building
Construction
Speedy, high Speedy, high
precision
precision
hole drilling hole drilling
Drilling holes Drilling holes
through
through
steel
shaped steel
Speedy, high Speedy, high
precision
precision
hole drilling hole drilling
Drilling holes Drilling holes
through
through
steel
shaped steel
ATRA ACE
Page
7
AUTO (WA-3500/WA-5000)
PORTABLE MAGNETIC BASE
AUTOMATIC DRILLING MACHINE
ATRA ACE
8-9
QUICK AUTO AND MANUAL FEED
PORTABLE MAGNETIC
DRILL STAND
ATRA MASTER
ANNULAR CUTTERS
BROACH CUTTERS
& BROACH HOLDERS
PORTABLE DOUBLE ACTING
HYDRAULIC PUNCHER
SELFER ACE
Precision
drilling
through
flanges
Drilling
Initial drilling Versatile
for sheet
drilling
cutting by
welder
Various
drilling
Drilling
through
shaped steel,
drilling at
elevated site
Drilling of
Drilling holes
large and
through steel
small
diameter
holes
through steel
Drilling holes Drilling of
large and
small
diameter
holes
through steel
Hole
punching
through
steel plates
Punching
bolt holes
through steel
plates
Punching
holes
through ship
frameworks
On-site
punching
holes
through
shaped steel
Hole
punching
through
steel plates
Punching
bolt holes
through steel
plates
Punching
holes
through ship
frameworks
On-site
punching
holes
through
shaped steel
Speedy, easy
hole
punching
through
steel sheets
Punching
holes
through
angles and
channels
On-site
small hole
punching
Beveling of
large
workpieces
Beveling of
steel plates
Beveling of
columns
10
11-12
13
HS SERIES AND HYDRAULIC PUMP
PORTABLE SINGLE ACTING
HYDRAULIC PUNCHER
SELFER
14
HA SERIES AND HYDRAULIC PUMP
ELECTRICALLY OPERATED
HYDRAULIC PUNCHER
HANDY SELFER
15-16
PUNCHES AND DIES FOR SELFER
PORTABLE BEVELING TOOLS
BEVELER
17
HAND BEVELER
TIGON Spring Balancers and Retractors
18
2
Pneumatic & Electric Power Tools,
Labor-saving plus Improved
Work Efficiency!
NEEDLE SCALER
POWER TOOLS
Manufacturing
Various peening works
Sheet-Metal Working
Paint & rust scaling
JET CHISEL
Spatter, chips &
sludge scaling
-
-
Spatter, sludge and
rust chiseling, scaling
-
-
-
PNEUMATIC SCALER
SUPER KELEN
Welding
PNEUMATIC GRINDER AND SANDER
MYTON
PNEUMATIC DIE GRINDER
AIR SONIC
PNEUMATIC HAND DRILL
Sanding, grinding,
chamfering, finishing
BELTON/BABY BELTON
PORTABLE CHAMFERING TOOLS
BEVELER
PNEUMATIC RADIAL CHAMFERING TOOL
CIRCUIT BEVELER
PORTABLE PRECISION FINISHING FILE
SUPER HAND
PORTABLE FINE FINISHING FILE
MICRO AIR HAND
PNEUMATIC HACKSAW
FREE SANDER
PNEUMATIC RECIPROCATING SANDER
LINE SANDER
PNEUMATIC DUST-FREE SANDER
ORBITAL SANDER
PNEUMATIC COMPACT SANDER
PALM ORBITAL SANDER
Whether you just glance through this
booklet or give it an intensive reading, we
are sure you'll agree that NITTO KOHKI's
portable hydraulic and electric machines,
couplings and pneumatic hand tools are
among the finest precision engineered
equipment to be found today.
3
Automotive &
Ship Building
Sand blasting &
chiseling
Rust scaling,
welded-part finish
Black surface scaling,
scaling of ingot
remnant in ladle
Removal of weeds,
shells, concrete
chipping
Sand chipping
Removal of weeds,
shells, etc., concrete
chipping
Bead grinding, cross
section grinding
Grinding of prepainted surface,
buffing
Trimming, chamfering
Metal working,
surface smoothing
Various grinding
work
Bead grinding
Pre-painted surface
regulation
Mold correction,
trimming
Various drilling work
Various drilling work
Initial boring for gas
cutting by welder
Paint scrambling
(w/attachment)
Bead grinding, rust
removal, chamfering,
section finishing
Rough grinding, rust
& paint removal,
spot smoothing
Trimming, chamfering,
spatter grinding,
die-cast finishing
Welding chip grinding,
finish grinding, fitting
Surface chamfering of
pre-welded shaped
steel parts
Chamfering of steel
plate
Chamfering of cast
molds
Chamfering of steel
plate
Trimming, chamfering
corner rounding
Chamfering of large
workpieces
Chamfering of dies
and machine
Precision filing of
flash, chamfering,
sanding, groove
finishing
Precision filing of
flash, chamfering,
groove finishing
Cuts with small radii
SUPER SAW
HANDY PNEUMATIC SANDER
Paint chiseling
Metal Casting &
Forging
Chamfering, rough
grinding, mold
grinding
AIR DRILL
PNEUMATIC BELT SANDER
-
Paint chipping
PNEUMATIC CHIPPING HAMMER
AIR CHIPPER
Painting
Surface sanding,
rust & stain removal
Spot smoothing,
surface regulation,
finish sanding
Chamfering of steel
plate
Trimming, filing in
narrow space,
surface regulation
Finish filing
-
Cutting of mild steel
plates, aluminum,
plastics and other
materials
Spot smoothing,
corner rounding,
surface smoothing
Construction
Page
-
-
Surface coarsening of
stone and concrete
products
19-20
-
-
Concrete chiseling
from framework,
removal of linoleum
from floor base
-
-
Chamfering of stone
products, honing
Sanding
Grinding of pipe
cross section and
inner surface
Chipping of stone
products
Correction grinding
of molded products,
rough grinding
Additional grinding
of construction
materials & parts
Drilling
Sash work
Grinding of pipe &
equipment surface
face section
21
22
23-24
25-26
26
Finish sanding of
furniture, profile
correction of plastic
products
Grinding of parts &
elements, repair
services of tools
Chamfering of columns
(HB-15B)
27-28
-
-
Trimming, precision
sanding of parts
Filing, superfine filing
for profile correction
Filing, superfine filing
for profile correction
Correction sanding of
metal parts
Trimming, precision
sanding of parts
Filing, superfine filing
for profile correction
-
-
32
Cutting of body panels
of automotive vehicles
or shaped steel
Cutting of fiber plates.
Cutting of fiberreinforced plastic plates
-
-
32
Mold correction
Sanding of prepainted, plastered
surface, water sanding
Paint sanding of
automotive body
Sanding of plastered
surface, and test piece
surface
Sanding of plastered
surface, intermediate
finish sanding
Mold correction
Paint sanding of
automotive body
Synthetic resin sanding Rough finish sanding
Trimming, surface
finishing of die-casting
Correction of grinding
(finish work)
Precision finishing
Trimming, surface
finishing of die-casting
Correction of grinding
(finish work)
Precision finishing
Precision filing of
pre-painted surface,
sanding
-
-
-
Plane sanding,
groove sanding
Spot smoothing,
surface regulation
Smoothing,
intermediate finish
sanding
Surface smoothing
of steel products,
finishing of pressed
products
Surface sanding of
pre-welded part
Ground work sanding
Smoothing,
intermediate finish
sanding
Surface smoothing
of steel products,
finishing of pressed
products
Surface sanding of
pre-welded part
Ground work sanding
-
Drilling, removal of
spot-welded parts
Wood Working & Art
-
-
-
Precision grinding
of parts
Chemical Engineering
-
Trimming
Trimming
-
Additional grinding,
rust removal, surface
smoothing
CONTENTS
-
-
Finish sanding, curved
surface sanding,
sanding of router
groove
Precision sanding
Precision sanding
29-30
Chamfering of steel
plate
29-30
Sanding of stone
products and floor
materials
Inner surface sanding
of channeled parts
Surface sanding of
constructed materials
Surface sanding of
constructed materials
31
33
34
35
35
NOTES ON USING TOOLS – Important Safety Instructions
36
HI CUPLA Series
37
"delvo" Electric Screwdrivers,
Linear Motor Driven Free Piston Systems
38
4
PORTABLE MAGNETIC BASE
AUTOMATIC DRILLING MACHINE
ATRA ACE AUTO
BORING
High-performance mechanism &
high-tech components
One-touch Cutter Replacement
Replacement is quick and easy with our
unique push fit self-centering
cutter system.
Improved Bearing Bracket
Our precision bearing bracket aligns
cutters precisely, which increases
cutter life.
Coolant into the Heart of the Cut
Mounting the cutter
Removing the cutter
Bearing Bracket
Coolant is fed directly to the inside of the
cut. The coolant system also features an
auto shut-off.
One-touch Cartridge-type
Oil Tank (QA Series)
Our big 24oz cartridge-type oil tank
makes it easy to maintain proper
coolant levels. There is also an
adjustable flow valve on the machine,
which allows the user to control
the amount of coolant that is being
applied to the cutter. Everything on
this tool is made to operate quickly
and accurately.
Chip Breaker Prevents Cutter
from Jamming
Our new chip breaker prevents the
cutter from becoming jammed with
metal shavings.
Fail-Safe Protection
Built-in Motion Sensor
If any lateral movement or excess vibration is detected, both the drill and
the feed motor stop instantly. Nitto Kohki is the first company to
incorporate this feature into magnetic base drills.
Fail-safe Restart
The drill will not re-start even if power is re-supplied after accidental
shutdown. Drilling can only be continued after turning on the drill switch.
Magnet Open-circuit Sensor
The drill will not start until the magnetic field is active.
Max. plate thickness 75mm
5
Power Failure Safety
ATRA ACE Automatic Drills temporarily remain on the material after an
interruption in power to prevent the drill from spinning off the material.
This helps prevent the drill from breaking free from the material and
possibly damaging the machine, cutter or even injuring the user.
PORTABLE MAGNETIC BASE
AUTOMATIC DRILLING MACHINE
BORING
ATRA ACE AUTO
New drill control prevents
cutters from breaking
On-site hole-cutting
On-site hole-cutting through steel
plates, H-Beams, shaped bars,
framework, shipbuilding, bridges,
structures, steel reinforcements,
construction materials and
other machinery.
Slow Start Mechanism
The feed speed is reduced for the first few seconds after boring
begins to ensure a smooth cut through the mill scale.
Auto-feed
ON
Automatic control & feed are activated
by simply pushing the feed handle
to engage the gears.
Feed
handle
Load Sensor
The dual sensing system responds to
both drilling and feeding forces on the
cutter for the optimum cutting condition.
Variable Automatic Feed
The feed speed is continuously monitored and
updated proportionally to the load on the cutter.
Step Feed
When cutting through difficult materials, the load
sensor will automatically activate the Step Feed Program
to help penetrate material.
Auto-return Function (QA Series)
Once drilling is completed and the slug is ejected from the
hole, the cutting bit is quickly retracted. This quick drill
motor retraction allows the user to move on to the next hole
more quickly.
Automatic-feed Hole-cutting Procedure
•
Align the pilot pin with the center
punch mark of the hole to be drilled.
Attach the machine to the beam with
the proper safety chain and engage
the magnet. Lower the drill
down from the top limit switch
location to the point of the
pilot pin making contact with the
material and engage the motor.
1
•
Engage the clutch by pushing the
handles in towards the drill and the
motor will begin feeding automatically.
J Automatic-feed operation
2
Limit Switch
The ATRA ACE Automatic
Drills utilize a limit switch
that resets the machine
when it retracts
to the starting
position after hole
LOAD DETECTOR
LOAD
completion, also
ON
STOP
shuts down the
Lights up
motors in the event
of an over-travel at the bottom of the stroke.
Cycle Stop (WA Series)
After the cut has finished, a detector responds to the reduction in
load and both the drill and the feed motor automatically stop.
•
Slow start mechanism cuts
smoothly through the mill scale. Then,
speed and feed rate is
controlled by the sensors to
achieve efficient drilling.
3
•
After the hole is completed, the QA
Series machines will quickly return
and stop at the top of the stroke,
ready for the next hole.
4
Overload Stop
When an excessive load is applied to the cutter, both the drill
and the feed motor will stop automatically to prevent the cutter
from breaking.
J
Types of hole-cutting
Slanted hole-cutting
Long hole-cutting
Edge hole-cutting
6
PORTABLE MAGNETIC BASE
AUTOMATIC DRILLING MACHINE
ATRA ACE AUTO
BORING
PORTABLE MAGNETIC BASE
AUTOMATIC DRILLING MACHINE
BORING
ATRA ACE QUICK AUTO
Nitto-Kohki’s Atra Ace boosts productivity
in the hole drilling industry.
WA-3500
WA-5000
Max. 1-3/8"
Max. 2"
QA-5000
QA-4000
Max. 1-9/16"
Load Sensor
Variable Automatic Feed
Cycle Stop
The dual sensing system responds to
both drilling and feeding forces on the
cutter for the optimum cutting condition.
The feed speed is continuously
monitored and updated proportionally
to the load on the cutter.
After the cut has finished, a detector responds
to the reduction in load and both the drill and
the feed motor automatically stop.
LOAD DETECTOR
LOAD
ON
STOP
Red Green Yellow Orange Red
QA-6500
Max. 2"
Max. 2-9/16"
Load Detection
Auto-return Function
Side mounted LED graph displays current drill
status before, during and after the drilling operation.
The load monitoring LEDs also offer advanced
notice of worn or damaged cutters.
Once drilling is completed and the slug is ejected
from the hole, the cutting bit is quickly retracted.
This quick drill motor retraction allows the user to
move on to the next hole more quickly.
Specifications
WA-3500
WA-5000
QA-4000
QA-5000
QA-6500
110-120 V AC 50/ 60Hz
110-120 V AC 50/ 60Hz
110-120 V AC 50/60Hz
110-120 V AC 50/60Hz
220-240 V AC 50/60Hz
W
1,100
1,150
680
1,010
1,010
A
10.2
10.8
6.1
9
4.5
rpm
950
350 / 650
750
400 / 750
400/ 750
Model
Power Source (Single Phase)
Electric Rated Power Consumption
Drill
Rated Current
No Load Speed
Magnet Power Consumption
W
Capacity Hole Diameter
Depth of Cut
Magnet Holding Power
Magnet Dimensions
Weight
Accessories Included
7
34
75
50
75
75
1-3/8" max.
2" max.
1-9/16" max.
2" max.
2-9/16" max.
2" max.
3" max.
1-3/8" max.
2" max.
2" max.
lbs
1,583
2,200
1,498
2,200
2,200
inch
3-5/8" x 8-1/2"
4" x 8"
3-1/4" x 6-13/16"
3-15/16" x 7-15/16"
3-15/16" x 7-15/16"
lbs
44
51
41
57
• UEA0835-0 pilot pin
5/16" x 1-3/8" DOC
• 3 mm allen wrench
• 8 mm x 10 mm combination
spanner
• Chip guard assembly
• Motor side handle
• Sample cutting fluid
• Safety chain
• Molded plastic
carrying case
• UEA0850-0 pilot pin
5/16" x 2" DOC
• 3 mm allen wrench
• 4 mm allen wrench
• 8 mm x 10 mm combination
spanner
• Chip guard assembly
• Motor side handle
• Sample cutting fluid
• Safety chain
• Molded plastic
carrying case
• UEA0835-0 pilot pin
5/16" x 1-3/8" DOC
• 3 mm allen wrench
• 4 mm allen wrench
• 8 mm x 10 mm combination
spanner
• Motor side handle
• Sample cutting fluid
• Safety chain
• Tool box
• UEA0835-0 pilot pin
5/16" x 1-3/8" DOC
• UEA0850-0 pilot pin
5/16" x 2" DOC
• 3 mm allen wrench
• 4 mm allen wrench
• 8 mm x 10 mm combination
spanner
• Motor side handle
• Sample cutting fluid
• Safety chain
• Tool box
57
• UEA0835-0 pilot pin
5/16" x 1-3/8" DOC
• UEA0850-0 pilot pin
5/16" x 2" DOC
• 3 mm allen wrench
• 4 mm allen wrench
• 8 mm x 10 mm combination
spanner
• Motor side handle
• Sample cutting fluid
• Safety chain
• Tool box
8
PORTABLE MAGNETIC BASE
DRILLING MACHINE
ATRA ACE AUTO
BORING
PORTABLE MAGNETIC BASE
DRILLING MACHINE
BORING
ATRA ACE AUTO
Nitto-Kohki’s Atra Ace boosts productivity
in the hole drilling industry.
manual feed
UOJ-3500
manual feed
UOJ-5500
Max. 1-3/8"
manual
feed
manual feed
Max. 2-3/16"
UO-3500
M-100D
Max. 1-3/8"
UOJ-5500 Load detector with "Smart-Stop Rapid Restart" technology
As the drilling load increases, the load indicator will change in color
from green to orange to red. In addition, if excessive feeding force
is applied, the load indicator will rapidly blink red and the rotation Continued Overload
of the drill motor will slow down and temporarily stop. If the load
is released while the load indicator is blinking red,
"Smart Stop"
the drill motor will resume its rotation.
Fast Blinking Red
Green
Proper Load
Drill motor
will not
turn on
Drill motor
Motion sensor active
Magnet malfunction
Max. 3/8"
Max. 4"
Slow Blinking Orange
Slow Blinking Red
shuts off
Green/Orange
Resume proper load
Overload
A-100
Safety Mode
Slow Blinking Green
"Rapid Start" resumes drilling operation
Red
Orange
manual feed
"Smart Stop" stalls motor when overloaded
• Especially designed for H.S.S. cutters
• Side-lock version (UO-3500-02)
available
Uses Hi-Broach
High-speed Steel
Annular Cutters
• Smallest and lightest Magnetic Base
Drill with 3/8” chuck
• Very easy to handle
• Superior workhorse for drilling small
holes with twist drill bits
• Super-duty Magnetic Base Drill to
handle up to 4” x 3” capacity
• Equipped with
overload indicator
with motor
shut-off feature
156 mm
(3" DOC)
Specifications
Model
UOJ-3500
UOJ-5500
UO-3500
M-100D
A-100
110-120 V AC 50/ 60Hz
110-120 V AC 50/ 60Hz
110-120 V AC 50/60Hz
110-120 V AC 50/60Hz
220-240 V AC 50/60Hz
W
680
1,150
680
390
1,600
A
6
10.8
6
3.7
7.4
rpm
700
350 / 650
400
1,700
330
W
32
50
32
35
80
1-3/8" max.
2-3/16" max.
1-3/8" max.
3/8" max.
4" max.
2" max.
3" max.
2" max.
4" max.
3" max.
1/2"
N/A
1/2"
3/8"
N/A
Power Source (Single Phase)
Electric Rated Power Consumption
Drill
Rated Current
No Load Speed
Magnet Power Consumption
Capacity Hole Diameter
Depth of Cut
Twist Drill Capacity
Magnet Holding Power
Magnet Dimensions
Weight
Accessories Included
9
lbs
2,023
2,249
2,023
772
3,968
inch
3-5/32" x 6-3/8"
3-3/8" x 6-11/16"
3-5/32" x 6-3/8"
4-1/8" dia.
5-1/8" x 10-1/16"
lbs
40
31
• UEA0835-0 pilot pin
5/16" x 1-3/8" DOC
• 3 mm allen wrench
• 5 mm allen wrench
• 8 mm x 10 mm combination
spanner
• Motor side handle
• Feed handles (3 each)
• Chip guard assembly
• Safety chain
• Molded plastic
carrying case
• UEA0850-0 pilot pin
5/16" x 2" DOC
• 3 mm allen wrench
• 5 mm allen wrench
• 8 mm x 10 mm combination
spanner
• Motor side handle
• Feed handles (3 each)
• Chip guard assembly
• Safety chain
• Molded plastic carrying case
• Sample Cutting Fluid
31
• UEA0825-0 pilot pin
5/16" x 1" DOC
• 3 mm allen wrench
• 5 mm allen wrench
• 8 mm x 10 mm combination
spanner
18
• Motor side handle
• Feed handles (3 each)
• Chip guard assembly
• Safety chain
• Molded plastic
carrying case
• 2.5 mm allen wrench
• 7 mm x 8 mm combination spanner
• Chuck key ((TP08006-0)
110
• TA9A207-0 pilot pin 3" DOC
• 2 mm allen wrench
• 2.5 mm allen wrench
• 3 mm allen wrench
• 4 mm allen wrench
• 5 mm allen wrench
• 6 mm allen wrench
• 7 mm allen wrench
• 8 mm x 10 mm
combination spanner
• Safety chain
• Tool box
10
ANNULAR CUTTERS
BROACH CUTTERS & BROACH HOLDERS BORING
T.C.T. (Tungsten Carbide Tip) cutters Rationalized Hole-cutting
Genuine one-touch cutters
are far superior to conventional
Nitto Kohki has developed the one-touch replacement system for
H.S.S. or cobalt cutters
Jetbroach carbide-tipped annular hole cutters. They are designed to
be mounted and removed without the use of a tool. This reduces the
time needed to replace cutters.
• Carbide tips for faster cutting
• Single pass cutting, no pilot hole required
• Annular part does all the work so small cutting resistance reduces
drilling time
• Cutting of slanted, elongated and edge holes is now possible
• Fractional and metric cutter sizes to suit wide range of applications
• Produces little slag and few chips for easy disposal
• Can also be fitted to and used with previous Atra Ace models using
a hexagon socket set-screw
• Improved concentricity extends cutter life!
One-touch system consisting of three balls inside the
arbor body produces a self-centering effect during cutting
to improve cutter performance and life
One-Touch type
JETBROACH CUTTERS
are far better than twist drills:
•Self-centering effect mechanism to extend cutter life
INDUSTRIAL ARBOR
Flexible body material for shatter
resistant design
Ball
Sleeve
• No dead point
• Peripheral cutting
• Dramatically reduce cutting
resistance
• Available size:
9/16” - 4” diameter
Arbor body
Note:
Broach
When holding with a hexagon
socket set-screw for fitting to
previous Atra Ace models,
be sure to tighten not to
a dimple but to the flat area
(arrow).
COMBINATION ON HOLDERS AND CUTTERS*
Part #
Overall Length
of Holder (mm)
A BHM-02035 (MT #2)
TB00390-0
163
UEA0835-0
B BHM-03050 (MT #3)
TB00392-0
182
UEA0835-0
C BHM-13075 (MT #3)
TB00352-0
248
D BHM-14075 (MT #4)
TB00354-0
232
E BHOR8-00050 (R-8)
TB05943-0
UEA0835-0
UEA0850-0
F BHR8-00050 (R-8)
TB05891-0
UEA0835-0
UEA0850-0
Jetbroach Holder
Up to 35mm Thick Up to 50mm Thick Up to 75mm Thick
Pilot Pin
Pilot Pin
Pilot Pin
UEA0850-0
TA9A207-0
TA9A207-0
*All holders use side-lock shank except for E – #BHOR8-00050, which uses one-touch shank.
Standard Accessories
A
Pilot Pin UEA0835-0
Pilot Pin TA9A207-0
FEED & SPEED
feet/min
m/min
65 - 131
20 - 40
98 - 164
98 - 164
164 - 229
229 - 295
30
30
50
70
-
50
50
70
90
Test Drilling is very often the only way to
determine the machinability of difficult
materials.
11
C
D
• •
E
•
F
A
Hex Wrench key 6
Hex Wrench key 8
B
• •
C
D
• •
E
F
•
Recommended Feed: 0.001”-0.004”/rev. (0.02~0.1 mm/rev.)
A guide to the selection of circumferential
cutting speeds:
Stainless
Steel
Mild Steel
Cast Iron
Brass
Aluminum
B
• •
Optional Accessories
Jetbroach
Cutter Coolant
(1 gal.)
TP00234-0
• Nitto’s Carbide Cool & Lube
maximizes Jetbroach drilling
performance and tool life.
• Economical dilution ratio of
10:1 (water:coolant)
• Also available in 55 gallon
drum (part # UEACL55-0)
BORING
ANNULAR CUTTERS
BROACH CUTTERS & BROACH HOLDERS
FRACTIONAL - Inch size
METRIC - mm size
JETBROACH
JETBROACH
One-touch Side-lock Type
(3/4” shank)
Diameter
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
1-7/16”
1-1/2”
1-9/16”
1-5/8”
1-11/16”
1-3/4”
1-13/16”
1-7/8”
1-15/16”
2”
2-1/16”
2-1/8”
2-3/16”
2-1/4”
2-5/16”
2-3/8”
2-7/16”
2-1/2”
2-9/16”
Decimal
.563
.625
.687
.750
.812
.875
.937
1.000
1.062
1.125
1.187
1.250
1.312
1.375
1.437
1.500
1.562
1.625
1.687
1.750
1.812
1.875
1.937
2.000
2.062
2.125
2.187
2.250
2.312
2.375
2.437
2.500
2.562
Pilot Pin
1-3/8” DOC
TK01160*
TK01161*
TK00517
TK00518
TK00519
TK00520
TK00521
TK00522
TK00523
TK00554
TK00555
TK00524
TK00525
TK00526
TK00641
TK00642
TK00643
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
UEA0835**
2” DOC
TK01162
TK01163
TK00559
TK00560
TK00561
TK00562
TK00563
TK00564
TK00567
TK00568
TK00565
TK00569
TK00570
TK00571
TK00572
TK00573
TK00574
TK00575
TK00576
TK00577
TK00578
TK00579
TK00580
TK00581
TK00644
TK00645
TK00646
TK00647
TK00648
TK00649
TK00650
TK00651
TK00652
4” DOC
–
–
–
–
TK00955
TK00956
TK01056
TK00958
TK01058
TK00960
TK00947
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
UEA0850† UEA0875
UEA0800
HI-BROACH (High Speed Steel)
One-touch Side-lock Type
(3/4” shank)
Diameter
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
15/16”
1”
1-1/16”
1-1/8”
1-3/16”
1-1/4”
1-5/16”
1-3/8”
Pilot Pin
Decimal
.437
.500
.562
.625
.687
.750
.812
.875
.937
1.000
1.062
1.125
1.187
1.250
1.312
1.375
1” DOC
UK00799*
UK00796*
TK00582**
TK00583**
TK00584
TK00585
TK00586
TK00587
TK00588
TK00589
TK00590
TK00591
TK00592
TK00593
TK00594
TK00595
2” DOC
UK00803*
UK00804*
TK00805†
TK00806†
TK00808†
TK00809
TK00810
TK00811
TK00812
TK00813
TK00814
TK00815
TK00816
TK00817
TK00818
TK00819
UEA0825
UEA0850
Side-lock Type
(1-1/4”Weldon Shank)
One-touch Side-lock Type
(3/4” shank)
3” DOC
–
–
TK01037
TK00981
TK00982
TK00983
TK00984
TK00985
TK00986
TK00987
TK00988
TK00989
TK00990
TK00991
TK00992
TK00993
TK00994
TK00995
TK00996
TK00997
TK00998
TK00999
TK01000
TK01001
TK01002
TK01094
TK01095
–
–
–
–
–
–
* 9/16” and 5/8” diameter cutters are 1” DOC
** Exception of TK01160 & TK01161 uses UEA0625
†
Exception of TK01162 & TK01163 uses UEA0650
JETBROACH
Diameter
17.5
18
18.5
19
19.5
20
20.5
21
21.5
22
22.5
23
23.5
24
24.5
25
26
26.5
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
Pilot Pin
Decimal
0.689
0.709
0.728
0.748
0.767
0.787
0.807
0.827
0.846
0.866
0.885
0.905
0.925
0.945
0.965
0.984
1.023
1.043
1.063
1.102
1.141
1.181
1.220
1.259
1.299
1.338
1.378
1.417
1.456
1.496
1.535
1.575
1.614
1.654
1.693
1.732
1.772
1.811
1.850
1.890
1.929
1.969
2.008
2.047
2.087
2.126
2.165
2.205
2.244
2.283
2.323
2.362
2.402
2.441
2.480
2.520
2.559
1-3/8” DOC
TK00301
TK00302
TK00303
TK00304
TK00305
TK00306
TK00307
TK00308
TK00309
TK00310
TK00311
TK00312
TK00313
TK00314
TK00315
TK00316
TK00317
TK00318
TK00319
TK00320
TK00321
TK00322
TK00323
TK00324
TK00325
TK00326
TK00328
TK00602
TK00603
TK00604
TK00605
TK00606
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
UEA0835
2” DOC
TK00380
TK00381
–
TK00382
TK00383
TK00384
TK00385
TK00386
TK00387
TK00388
TK00389
TK00390
TK00391
TK00392
TK00393
TK00394
TK00395
TK00396
TK00397
TK00398
TK00399
TK00400
TK00401
TK00402
TK00403
TK00404
TK00405
TK00406
TK00407
TK00408
TK00409
TK00410
TK00411
TK00412
TK00413
TK00414
TK00415
TK00416
TK00417
TK00418
TK00419
TK00420
TK00442
TK00443
TK00444
TK00445
TK00446
TK00447
TK00448
TK00449
TK00450
TK00451
TK00607
TK00608
TK00609
TK00610
TK00611
UEA0850
Diameter
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Pilot Pin
Decimal
1.969
2.008
2.047
2.087
2.126
2.165
2.205
2.244
2.283
2.323
2.362
2.402
2.441
2.480
2.520
2.559
2.598
2.638
2.677
2.717
2.756
2.795
2.835
2.874
2.913
2.953
2.992
3.031
3.071
3.110
3.150
3.189
3.228
3.268
3.307
3.346
3.386
3.425
3.465
3.504
3.543
3.583
3.622
3.661
3.701
3.740
3.780
3.819
3.858
3.898
3.937
3” DOC
TJ17709
TJ16651
TJ16652
TJ16653
TJ16654
TJ16655
TJ16656
TJ16657
TJ16658
TJ16659
TJ16660
TJ16661
TJ16662
TJ16663
TJ16664
TJ16665
TJ16666
TJ16667
TJ16668
TJ16669
TJ16670
TJ16671
TJ16672
TJ16673
TJ16674
TJ16675
TJ16676
TJ16677
TJ16678
TJ16679
TJ16680
TJ16681
TJ16682
TJ16683
TJ16684
TJ16685
TJ16686
TJ16687
TJ16688
TJ16689
TJ16690
TJ16691
TJ16692
TJ16693
TJ16694
TJ16695
TJ16696
TJ16697
TJ16698
TJ16999
TJ16700
TA9A207
Hi-Broach metric sizes available
upon request.
* UK number cutter comes with pilot pin
** Exception of TK00582 & TK00583 uses UEA0625
† Exception of TK00805, TK00806 & TK00808 uses UEA0650
12
PORTABLE DOUBLE-ACTING
HYDRAULIC PUNCHER
SELFER ACE
PUNCHING
Double acting hydraulic system allows
automatic and inching (manual mode) operation.
15.16”
(385mm)
HS06, HS07, HS11
15/16"
14.29”
(363mm)
18.21” (462.5mm)
*
Dimension from
edge to Punch
Center
12.72”
(323mm)
16.95” (430.5mm)
16.65” (423mm)
Max. Punching Diameter : 1-1/16"
Max. Punching Diameter : 15/16"
Max. Punching Diameter : 7/8"
Max. Punching Thickness : 5/8" *
1 / 4" for 304 Stainless Steel
Max. Punching Thickness : 5/8"
1/4" for 304 Stainless Steel
Max. Punching Thickness : 1/2"
1/4" for 304 Stainless Steel
Max. Output : 52 tons
Max. Output : 52 tons
Max. Output : 41 tons
1" and 1-1/16" punch requires the use of a split lock nut (UHA9936-0) and reduces the maximum thickness to 9/16"
Specifications
In case of mild steel maximum punching thickness must be decided based on the equation of 0.8 x punching diameter. For details see the instruction manual.
HS11-1624
HSO7-1624
HS06-1322
Max. Throat Depth
4-5/16"
2-3/4"
2-3/8"
Hole Making Time
Punching Time 11.8 sec.
Punching Time 11.8 sec.
Punching Time 7.9 sec.
Returning Time 5.7 sec.
Returning Time 5.7 sec.
Returning Time 3.4 sec.
10,000 psi
10,000 psi
10,000 psi
66 lbs.
56 lbs.
45 lbs.
Model
Allowable Max. Pressure
Weight
• Hose Kit Assembly • Hose Cord Assembly • Spanner • Spanner 12 • Sub Handle Assembly • Chip Guard Ass'y
Accessories Included
• Tool Box • 22 mm Punch & Die mounted on machine • 4mm Allen Wrench • 5mm Allen Wrench
Optional Accessories
UHA9936-0 Split
Lock Nut
for 1” and
1-1/16” Punch
TA99037-0 Lock
Nut Assembly
for 25 mm Punch
Hook Clamp
Assembly
Part #TW-40
Spring Balancer
for HS11/HS07
for HS Type
Part #TW-30
Spring Balancer
for HS06
Part #TBO2142-0
Hook Clamp Assembly
Specifications
Model
Power Source (Single Phase)
Double-Acting
16.34”
(415mm)
110-120V AC
10,000 psi
Output At No Load
1.53 qt/min
Output AT 10,OOO psi
0.7 qt/min
Motor
0.4 kw 4p
Discharge Port
16.79” (426.4mm)
HPD-05
Max. Output Pressure
Reservoir Capacity
13
Part #TB02141-0
Foot Switch Relay
Assembly
Weight
4.26 qt
Rc 3/8 (PT 3/8")
63 lbs.
PORTABLE SINGLE-ACTING
HYDRAULIC PUNCHER
PUNCHING
Punch, return, and reset operations are fully automatic.
An emergency switch stops the punch instantly at any time.
Dimension
from edge
to punch center
HA06, HA07,HA11
15/16"
16.46”
(418mm)
17.17”
(436mm)
15”
(381mm)
21.5” (545.6mm)
21.5” (545.6mm)
*
SELFER
20.63” (524.1mm)
Max. Punching Diameter : 1-1/16"
Max. Punching Diameter : 15/16"
Max. Punching Diameter : 7/8"
Max. Punching Thickness : 5/8"*
Max. Punching Thickness : 5/8"
Max. Punching Thickness : 1/2"
Max. Output : 49 tons
Max. Output : 49 tons
Max. Output : 34 tons
1" and 1-1/16" punch requires the use of a split lock nut (UHA9936-0) and reduces the maximum thickness to 9/16"
Specifications
In case of mild steel maximum punching thickness must be decided based on the equation of 0.8 x punching diameter. For details see the instruction manual.
HA11-1624
HAO7-1624
HA06-1322
Max. Throat Depth
4-5/16"
2-3/4"
2-3/8"
Hole Making Time
Punching Time 16.5 sec.
Punching Time 16.5 sec.
Punching Time 10.5 sec.
Returning Time 1 sec.
Returning Time 1 sec.
Returning Time 1 sec.
10,000 psi
10,000 psi
10,000 psi
78 lbs.
63 lbs.
47 lbs.
Model
Allowable Max. Pressure
Weight
• Hose Cord Assembly • Spanner • Sub Handle Assembly • Tool Box
Accessories Included
• 22 mm Punch & Die mounted on machine • 4mm Allen Wrench
Optional Accessories
UHA9936-0 Split
Lock Nut
for 1” and
1-1/16” Punch
TA99037-0 Lock
Nut Assembly
for 25 mm Punch
Part #TW-40
Spring Balancer
for HA11/HA07
Part #TW-30
Spring Balancer
for HA06
Part #TA96342-0
Hook Clamp Assembly
Part #TA94386-0
Foot Switch Assembly
Specifications
Model
Power Source (Single Phase)
Single-Acting
12.76”
(324mm)
Max. Output Pressure
10,000 psi
Output At No Load
1.28 qt/min
Output At 10,000 psi
0.59 qt/min
Motor
Reservoir Capacity
Discharge Port
14.96” (380mm)
SC-05
110-120V AC
Weight
0.4 kw 4p
4.26 qt
Rc 3/8 (PT 3/8")
60 lbs.
14
ELECTRICALLY OPERATED
HYDRAULIC PUNCHER
HANDY SELFER
PUNCHING
Self-contained hydraulic punch shows its power in making round
or elongated holes in flat bar, angle bar or channel iron.
Max. Punching Diameter: 13/16"
Custom shape and size punches and dies
available upon request
Max. Punching Thickness: 1/4"
Max. Output: 17 tons
Selection of Dies
Specifications
Model
Power Source (Single Phase)
E55-0619
Plate Thickness
Application
Type of Die
110-120V AC 50/60 Hz
Mild Steel
Rated Power Consumption
670 W
For thin sheets
A
1/16" – 1/8"
Max. 1/8"
Rated Current
7.0 A
For thick sheets
B
5/32" – 1/4"
Max. 5/32"
Max. Punching Diameter
13/16"
For channel iron
C
9/32" – 5/16"
N.A.
Max. Punching Thickness
Max. Throat Depth
1/4"
2-3/16"
Punching Time
2 sec.
Weight
31 lbs
Accessories Included
Optional Accessories
• 3 mm / 4 mm / 5 mm Allen Wrench
• Stand Assembly
• EL Punch 18 / EL Die 18B / EL Die 18A
Mounted on Machine
• Spanner 10 x 12
Foot Switch Assembly
TB00799-0
15
Stainless Steel
PUNCHES & DIES
PUNCHING
Punches & Dies for SELFER Puncher
30
For HS and HA Series SELFER ACE
For E55-0619 HANDY SELFER
FRACTIONAL - Inch Round Size
Diameter
5/16”
3/8”
7/16”
1/2”
9/16”
5/8”
11/16”
3/4”
13/16”
7/8”
15/16”
**1”
**1-1/16”
Decimal
0.313
0.375
0.438
0.500
0.563
0.625
0.688
0.750
0.813
0.875
0.938
1.000
1.063
Punches & Dies for HANDY SELFER
FRACTIONAL - Inch Round Size
Punch
UHP0516
UHP0308
UHP0716
UHP0102
UHP0916
UHP0508
UHP1116
UHP0304
UHP1316
UHP0708
UHP1516
UHP0101
UHP1716
Die
UHD0516
UHD0308
UHD0716
UHD0102
UHD0916
UHD0508
UHD1116
UHD0304
UHD1316
UHD0708
UHD1516
UHD0101
UHD1716
60
D Punch
42
16.5
D Dies
Diameter
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
Decimal
0.250
0.313
0.375
0.438
0.500
0.563
0.625
0.688
0.750
0.813
Punch
E5P0104-0
E5P0516-0
E5P0308-0
E5P0716-0
E5P0102-0
E5P0916-0
E5P0508-0
E5P1116-0
E5P0304-0
E5P1316-0
“A” Die
E5D0104-A
E5D0516-A
E5D0308-A
E5D0716-A
E5D0102-A
E5D0916-A
E5D0508-A
E5D1116-A
E5D0304-A
E5D1316-A
“B” Die
E5D0104-B
E5D0516-B
E5D0308-B
E5D0716-B
E5D0102-B
E5D0916-B
E5D0508-B
E5D1116-B
E5D0304-B
E5D1316-B
“C” Die
–
–
E5D0308-C
E5D0716-C
E5D0102-C
E5D0916-C
E5D0508-C
–
–
–
“B” Die
TK00222
TK00223
TK00224
TK00225
TK00226
TK00227
TK00228
TK00229
TK00230
TK00231
TK00232
TK00233
TK00234
TK00280
TK00182
“C” Die
–
–
–
–
TK00235
TK00236
TK00237
TK00238
TK00239
TK00240
TK00241
–
–
–
–
“A” Die for 1/16” thru 1/8” mild steel
“B” Die for 5/32” thru 1/4” mild steel
“C” Die for 9/32” thru 5/16” mild steel/C-channel
**1” and 1-1/16” require part # UHA9936 split lock nut
For E55-0619 HANDY SELFER
METRIC - mm Round Size
30
For HS and HA Series SELFER ACE
METRIC - mm Round Size
Diameter
8
9
10
11
12
13
14
14.5
15
16
17
17.5
18
18.5
19
20
20.5
21
21.5
22
22.5
23
23.5
24
*25
Decimal
0.315
0.354
0.394
0.433
0.472
0.512
0.551
0.571
0.591
0.630
0.669
0.689
0.709
0.728
0.748
0.787
0.807
0.827
0.846
0.866
0.886
0.906
0.925
0.945
0.984
Punch
TJ10778
TJ11088
TJ06700
TJ06698
TJ06696
TJ06694
TJ06692
TJ06611
TJ06690
TJ06688
TJ06686
TJ06609
TJ06684
TJ08578
TJ06682
TJ06680
TJ06607
TJ06678
TJ07979
TJ06676
TJ09552
TJ06674
TJ06566
TJ07748
TJ10061
Die
TJ10779
TJ11089
TJ06701
TJ06699
TJ06697
TJ06695
TJ06693
TJ06612
TJ06691
TJ06689
TJ06687
TJ06610
TJ06685
TJ08579
TJ06683
TJ06681
TJ06608
TJ06679
TJ07980
TJ06677
TJ09553
TJ06675
TJ06569
TJ07749
TJ10062
60
D Punch
42
16.5
D Dies
*25 mm requires part # TA99037 oversized lock nut
Punch
TJ13229
TJ13230
TJ13231
TJ14973
TJ13232
TJ13262
TJ13233
TJ13234
TJ13235
TJ13236
TJ13237
*25 mm size requires part # TA99037 oversized lock nut
“A” Die
TK00208
TK00209
TK00210
TK00211
TK00212
TK00213
TK00214
TK00215
TK00216
TK00217
TK00218
TK00219
TK00220
TK00279
TK00181
METRIC - mm Oblong Size
Roll Pin
Elongated
hole Punch
Jig
Elongated
hole Die
Die
TJ13238
TJ13239
TJ13240
TJ14974
TJ13241
TJ13263
TJ13242
TJ13243
TJ13244
TJ13245
TJ13246
Punch
TK00193
TK00194
TK00195
TK00196
TK00197
TK00198
TK00199
TK00200
TK00201
TK00202
TK00203
TK00204
TK00205
TK00278
TK00180
For E55-0619 HANDY SELFER
METRIC - mm Oblong Size
Decimal
0.630 x 0.315
0.709 x 0.354
0.787 x 0.394
0.787 x 0.551
0.866 x 0.433
0.866 x 0.551
0.945 x 0.472
0.984 x 0.354
0.984 x 0.472
0.984 x 0.551
0.984 x 0.709
Decimal
0.236
0.256
0.315
0.335
0.394
0.433
0.472
0.512
0.551
0.591
0.630
0.669
0.709
0.728
0.748
“A” Die for 1/16” thru 1/8” mild steel
“B” Die for 5/32” thru 1/4” mild steel
“C” Die for 9/32” thru 5/16” mild steel/C-channel
For HS and HA Series SELFER ACE
Size
16 x 8
18 x 9
20 x 10
20 x 14
22 x 11
22 x 14
24 x 12
*25 x 9
*25 x 12
*25 x 14
*25 x 18
Diameter
6
6.5
8
8.5
10
11
12
13
14
15
16
17
18
18.5
19
Jig
TK00455
TK00456
TK00457
TK00469
TK00458
TK00464
TK00459
TK00460
TK00461
TK00462
TK00463
Size
10 x 6.5
13 x 6.5
13 x 8.5
13.5 x 9
15 x 10
16.5 x 11
17 x 8.5
18 x 9
18 x 12
19.5 x 13
20 x 10
21 x 14
Decimal
0.394 x 0.256
0.512 x 0.256
0.512 x 0.335
0.531 x 0.354
0.591 x 0.394
0.650 x 0.433
0.669 x 0.335
0.709 x 0.354
0.709 x 0.472
0.768 x 0.512
0.787 x 0.394
0.827 x 0.551
Punch
TK00242
TK00243
TK00244
TK00245
TK00246
TK00247
TK00248
TK00249
TK00250
TK00251
TK00252
TK00253
“A” Die
TK00254
TK00255
TK00256
TK00257
TK00258
TK00259
TK00260
TK00261
TK00262
TK00263
TK00264
TK00265
“B” Die
TK00266
TK00267
TK00268
TK00269
TK00270
TK00271
TK00272
TK00273
TK00274
TK00275
TK00276
TK00277
“A” Die for 1/16” thru 1/8” mild steel
“B” Die for 5/32” thru 1/4” mild steel
22
40
22.5
30.5
EL Punches
32
Front view of
EL Dies Type A, B & C
Side face of
EL Dies Type A, B & C
Custom shape and size punches and dies for SELFER ACE,
SELFER, and HANDY SELFER available upon request.
16
PORTABLE
BEVELING TOOLS
BEVELER
BEVELING
HAND BEVELER HB-15B
Chamfering up to 15C
Mild Steel
15C
Features
• Ideal for plate, pipe, and tube beveling for
welding preparation
• Bevels angles 15˚ to 45˚
• Bevels depth up to 5/8” (15 mm) at 45˚ angle using
multiple passes
11.61” (295 mm)
• Bevels approximately 3’ to 4’ per minute
• High speed cutting action minimizes material hardening
• One year limited warranty
Chamfering I-beams
Chamfering steel plates
8.66” (220 mm)
Specifications
Model
HB-15B
115V AC, 50/60 Hz
Power Supply
Rated Power Consumption
910 W
Rated Current
10.5 A
3,340 RPM
No Load Speed
5/8" (15 mm) Depth at 45˚ Angle
Chamfering Capacity (Mild Steel)
15˚ – 45˚
Chamfer Angle
13.1 feet (4 meters)
Power Cord
33 lbs
Weight
Accessories Included
• 4 mm Allen Wrench
• 5 mm Allen Wrench
• 6 mm Allen Wrench
• Hook Spanner 25-28
• Spanner 24 mm x 27 mm
• 3mm T Wrench
• Roller Bracket Assembly
• 2 Sets of Cutting Tips, Comes with One Set
Mounted (12 pieces/set)
Optional Accessories
• TA9A728 Pipe and Tube Beveling Attachment
Capacity 5” to 32” inches O.D.
• TA9A093 Cutting Tips (12 pieces/set)
Chamfer angle and width
Chamfer
Angle
45˚
30˚
15˚
17
HB-15B
Mild Steel(mm) Chamfer
X
Y
Y
15
15
9
15.5
4
15.4
X
Straight
Tigon Spring Balancers and Retractors
Spring Balancers
TIGON Spring Balancer Improves
Work Safety & Efficiency
Capacities ranging from 1.1 - 154.3 lbs.
(0.5 - 70 kg.)
Capacity
Model
Stroke
TW-00
TW-3
TW-0
TW-5
Weight
lbs.
kg
feet
mm
lbs.
kg
TW-00
1.1-3.3
0.5-1.5
1.64
0.5
0.4
0.2
TW-0
1.1-3.3
0.5-1.5
3.28
1.0
1.1
0.5
TW-3
2.2-6.6
1.0-3.0
4.27
1.3
3.1
1.4
TW-5
5.5-11.0
2.5-5.0
4.27
1.3
3.3
1.5
TW-9
9.9-19.8
4.5-9.0
4.27
1.3
7.5
3.4
TW-15
19.8–33.1
9.0-15.0
4.27
1.3
8.4
3.8
TW-22
33.1-48.5
15.0-22.0
4.92
1.5
15.9
7.2
TW-30
48.5-66.1
22.0-30.0
4.92
1.5
16.8
7.6
TW-40
66.1-88.2
30.0-40.0
4.92
1.5
21.6
9.8
TW-50
88.2-110.3
40.0-50.0
4.92
1.5
22.9
10.4
TW-60
110.3-132.3
50.0-60.0
4.92
1.5
25.6
11.6
TW-70
132.3-154.3
60.0-70.0
4.92
1.5
26.0
11.8
TW-22
TW-15
TW-9
TW-50
TW-40
TW-30
TW-60
TW-70
Hose Reel Balancers
Functions both as balancer and hose reel
Model
Capacity
Stroke
Weight
Hose Diameter (mm)
lbs.
kg
feet
m
lbs.
kg
I.D.
O.D.
HW-0
1.1-3.3
0.5-1.5
4.27
1.3
3.5
1.6
6.5
10
HW-3
3.3-6.6
1.5-3.0
4.27
1.3
3.8
1.7
6.5
10
HW-5
6.6-11.0
3.0-5.0
4.27
1.3
4.0
1.8
6.5
10
Retractors
Handy knob for easy tension adjustment
Model
Capacity
Stroke
Weight
lbs.
kg
feet
m
lbs.
kg
RW-0
1.1-3.3
0.5-1.5
6.56
2.0
1.1
0.5
RW-3
2.2-6.6
1.0-3.0
6.56
2.0
1.5
0.7
RW-5
5.5-11.0
2.5-5.0
6.56
2.0
2.0
0.9
Model
TW-1R
Capacity
Stroke
Weight
lbs.
kg
feet
m
lbs.
kg
1.1-3.3
0.5-1.5
4.92
1.5
0.66
0.3
18
NEEDLE SCALER
JET CHISEL
SCALING
JET CHISEL
Features
Powerful scaling
with multi-needles
• Quickly and efficiently removes weld slag, rust,
paint and scale from most surfaces.
• Ideal for cleaning and descaling steel, bridgework, castings, brick, stone and many
other materials.
• Heavy-duty construction for industrial and
maritime applications.
• Proven superior design features with no
internal spring components ensures troublefree performance.
• One year limited warranty.
Shot Peening Effect
Fully Automatic System
Reinforcement of a welded part with the shot peening
effect increases strength by imparting residual stress
to the surface of the workpiece through the high speed
impact of the needles. Highly suitable for effective
reinforcement of deteriorated welded parts.
The only unit of its kind on the market
without springs. This means no springs
to break...no irregular power... and the
advantage of low air consumption.
AJC-16 Slim Model
JT-20 Medium Duty Model
7.48” (190 mm)
Vibration Model
JEX-20 Reduced
9.60” (244 mm)
9.65” (245) mm
Specifications
Model
Air Pressure
Air Consumption
Strokes per Minute
Standard Needles with Machine
Optional Needle Size
19
AJC-16
JT-20
JEX-20
85 PSI
85 PSI
85 PSI
2.6 CFM
7.1 CFM
7.1 CFM
6,000 SPM
4,000 SPM
4,000 SPM
3 pieces of 3 mm x 180 mm
12 pieces of 3 mm x 180 mm
12 pieces of 3 mm x 180 mm
N/A
29 pieces of 2 mm x 180 mm
29 pieces of 2 mm x 180 mm
Hose Size
3/8” ID
3/8” ID
3/8”ID
Weight
2.2 lbs.
5.3 lbs.
6.1 lbs
Accessories Included
• Threaded Adapter PT3/8” x NPT3/8”
• Hose Nipple PT3/8” x 3/8”
• Threaded Adapter PT3/8” x NPT3/8”
• Hose Nipple PT3/8” x 3/8”
• Threaded Adapter PT3/8” x NPT3/8”
• Hose Nipple PT3/8” x 3/8”
SCALING
JET CHISEL
NEEDLE SCALER
JC-16
JEX-24
JEX-28
Medium-duty Model
Lightweight Model
6.22” (158 mm)
9.33” (237 mm)
Reduced Vibration Model
9.72” (247 mm)
10.39” (264 mm)
6.26”
(159 mm)
5.90”
(150 mm)
JEX-2800A
Heavy-duty Model
6.81”
(173 mm)
6.81”
(173 mm)
Specifications
Model
JC-16
JEX-24
JEX-28
JEX-2800A
Air Pressure
85 PSI
85 PSI
85 PSI
85 PSI
5.3 CFM
9.5 CFM
12.4 CFM
15.2 CFM
4,000 SPM
4,000 SPM
4,500 SPM
3,700 SPM
Air Consumption
Strokes per Minute
Standard Needles with Machine 29 pieces of 2 mm x 180 mm 23 pieces of 3 mm x 180 mm 28 pieces of 3 mm x 180 mm 28 pieces of 3 mm x 180 mm
N/A
Optional Needle Size
53 pieces of 2 mm x 180 mm 66 pieces of 2 mm x 180 mm 66 pieces of 2 mm x 180 mm
12 pieces of 4 mm x 180 mm 14 pieces of 4 mm x 180 mm 14 pieces of 4 mm x 180 mm
Hose Size
3/8” I.D.
3/8” I.D.
3/8” I.D.
3/8” I.D.
Weight
3.1 lbs.
6.1 lbs.
7.7 lbs.
6.8 lbs.
• Threaded Adapter PT3/8” x NPT3/8”
• Hose Nipple PT3/8” x 3/8”.
Accessories Included
• Threaded Adapter PT3/8” x NPT3/8”
• Hose Nipple PT3/8” x 3/8”.
• 6mm Allen Wrench
• Threaded Adapter PT3/8” x NPT3/8”
• Hose Nipple PT3/8” x 3/8”.
• TP01462 Needle Supporter 4mm
• 14 pieces of 4mm x 180mm Needles
• 6mm Allen Wrench
• Operates on standard 120V current
• Powerful 300 watt double insulated motor
• Extended length, slim barrel design
• Adjustable front handle for operator comfort and convenience
• One year limited warranty
Electric Needle Scaler
EJC-32A
Specifications
20.47” (520 mm)
Model
Power Supply
Rated Power Consumption
Rated Current
8.86”
(225 mm)
Rated Duty Cycle
Strokes per Minute
Double Insulated
Motors
Accessories Included
• Threaded Adapter PT3/8” x NPT3/8”
• Hose Nipple PT3/8” x 3/8”.
• TP01462 Needle Supporter 4mm
• 14 pieces of 4mm x 180mm Needles
• 15 pieces of 3 mm × 180 mm Needles
• 6mm Allen Wrench
EJC-32A
115 V AC, 50/60 Hz 230 V AC, 50/60 Hz
300 watts
300 watts
2.8 A
1.4 A
30 minutes
Standard Needles with Machine
3,000 SPM
15 pieces of 3 mm x 180 mm
Optional Needle Size
32 pieces of 2 mm x 180 mm
Power Cord Length
Weight
6-1/2 feet (5 meters)
9.9 lbs. (4.5 kg)
Optional Needles
Premium Nitto Kohki needles
out-perform competitors’ needles
ensuring optimal performance and
trouble-free operation.
Anti-sparking beryllium copper and
stainless steel needles available
upon request. Consult factory
before ordering.
20
PNEUMATIC SCALER
SUPER KELEN
SCALING
SUPER KELEN
Industrial and shipboard pneumatic scalers
Features
• Quickly and efficiently removes rust, scale, paint, tar
and concrete from most surfaces
• Ideal for industrial, maritime and shipboard cleaning
and descaling operations
• Idle protection system, tool will not activate unless
contacting work surface
• S-1000 – over 4-1/2’ in length for extended reach
applications and operator convenience
• One-touch chisel installation and removal – NO tools
required
• One year limited warranty.
Model
S-250
l
Mode
24.80” (630 mm)
S-500
l
Mode
35.04” (890 mm)
0
S-100
57.87” (1470 mm)
Specifications
S-250
Model
Model
S-500
S-1000
85 PSI
85 PSI
85 PSI
9.5 CFM
9.5 CFM
9.5 CFM
Strokes per Minute
2,500 SPM
2,500 SPM
2,500 SPM
Shank Size
1/2” Square
1/2” Square
1/2” Square
Air Pressure
Air Consumption
Hose Size
3/8’’ ID
3/8” ID
3/8” ID
Weight
9.0 lbs.
10.4 lbs
13.4 lbs.
Accessories Included
• Scraper #2005
• Threaded Adapter M16 x NPT3/8”
• Scraper #2005
• Threaded Adapter M16 x NPT3/8”
• Scraper #2005
• Threaded Adapter M16 x NPT3/8”
Optional Chisels
2001
21
2002
2003
2004
2005
2006
2007
PN
Description
Qty
TP03645
TP03646
TP03647
TP04010
TP04552
TP04553
TP04554
2001 Scraper 2-3/8” (60 mm)
2002 Scraper 1-1/2” (38 mm)
2003 Blank Chisel
2004 Concave Scraper 2-3/8” (60 mm)
2005 Bend Scraper 1-1/2” (38 mm)
2006 Concave Bend Scraper 2-3/8” (60 mm)
2007 Bend Scraper 2-3/8” (60 mm)
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
SCALING
PNEUMATIC CHIPPING HAMMER
AIR CHIPPER
AIR CHIPPER
Removes weld splatter quickly and easily
Features
• Ideal tool for quickly and efficiently removing weld
splatter, rust and other debris from most surfaces
• Compact, heavy-duty construction for tough industrial
applications
• Easy one-touch chisel installation and removal –
NO tools required
• Idle protection system, helps prevent accidental start-up
“ACH-16” only
• One year limited warranty
CH-24
ACH-16
5.79” (147 mm)
7.24” (184 mm)
Specifications
Model
ACH-16
CH-24
Air Pressure
85 PSI
85 PSI
5.3 CFM
7.1 CFM
Air Consumption
Strokes per Minute
6,000 SPM
4,000 SPM
Shank Size
27/64” (10.5 mm) Round
1/2” Square
Hose Size
3/8” ID
3/8” ID
Weight
2.2 lbs.
3.7 lbs.
Accessories Included
• TQ03431 - Flat Chisel
• Hose Nipple PT3/8” x 3/8”
• Threaded Adapter PT3/8” x NPT3/8”
Optional Chisels
ACH-16 Chisels
PN
TQ03431
TQ03453
TQ03549
TQ03452
TQ03431
TQ03453
TQ03549
• TP15166 - Curved Flat Chisel
• Hose Nipple PT3/8” x 3/8”
• Threaded Adapter PT3/8” x NPT3/8”
Description
Qty
Flat Chisel 3/4” x 4-3/4” (20 mm x 120 mm)
Curved Flat Chisel 3/4” x 4-3/4” (20 mm x 120 mm)
Flat Chisel 7/16” x 4-3/4” (11 mm x 120 mm)
Flat Chisel 3/4” x 7-1/16” (20 mm x 180 mm)
1 pc.
1 pc.
1 pc.
1 pc.
TQ03452
CH-24 Chisels
PN
Description
TP15234 Straight Flat Chisel 1/2” x 6-1/2” (12.7 mm x 165 mm)
TP15233 Flat Chisel 1” x 6-1/8”(25 mm x 155 mm)
TP15166 Curved Flat Chisel 1” x 6-1/8” (25 mm x 155 mm)
TP15234
TP15233
TP15166
Qty
1 pc.
1 pc.
1 pc.
22
PNEUMATIC GRINDER
MYTON
MYTON
GRINDING & SANDING
Heavy-duty grinders for tough applications
MYTON Angle Grinder Features
•
•
•
•
•
•
•
•
Ideal for industrial and production grinding applications
Variable Speed Control
Side exhaust with noise reduction system
Locking throttle lever helps prevent accidental start-up
Great power/weight ratio
Insulated handle for operator convenience and comfort
Push button spindle lock for changing wheels (MLG-40, MLG70)
One year limited warranty
center
center
MLG-40 Depressed
wheel 4”
MLG-25 Depressed
wheel 2-1/4”
8.84” (224.5 mm)
5.23” (133 mm)
3.37”
(85.5 mm)
2.62”
(66.5 mm)
center
center
MLG-70 Depressed
wheel 7”
MAGW-40 Depressed
wheel 4”
8.62” (219 mm)
9.37” (238 mm)
3.88”
(95 mm)
4.02”
(102 mm)
Specifications
Model
MLG-25
MLG-40
MAGW-40
MLG-70
Air Pressure
85 PSI
85 PSI
85 PSI
85 PSI
14.8 CFM
15.9 CFM
24.0 CFM
26.5 CFM
32.1 CFM
29.0 CFM
38.8 CFM
Air Consumption (No Load)
Air Consumption (Load)*
Free Speed
19,000 RPM
13,000 RPM
13,000 RPM
7,600 RPM
Grinding Wheel Diameter
2-1/4” max.
4” max.
4” max.
7” max.
3/8”
5/8”
5/8”
7/8”
Horsepower
0.29 HP
0.97 HP
0.78 HP
1.50 HP
Hose Size
1/4” ID
3/8” ID
3/8” ID
3/8” ID
Weight
1.3 lbs.
3.3 lbs.
3.4 lbs.
5.4 lbs.
Spindle OD Size
Accessories Included
23
*Governed models
• Threaded Adapter
PT1/4” x NPT1/4”
• 5 mm Allen Wrench
• 19 mm Spanner
• 80 grit Grinding Disc
• Threaded Adapter
PT3/8” x NPT3/8”
• 5 mm Allen Wrench
• 6 mm Allen Wrench
• Threaded Adapter
PT3/8” x NPT3/8”
• 6 mm Allen Wrench
• 17 mm Spanner
• Threaded Adapter
PT3/8” x NPT3/8”
• 6 mm Allen Wrench
• 8 mm Allen Wrench
• Side Handle Assembly
• Wheel Guard Assembly
GRINDING & SANDING
PNEUMATIC SANDER
MYTON
MYTON
Angle Sanders
Features
• Ideal for sanding and/or polishing metal, aluminum,
•
•
•
•
•
•
•
•
wood, plastic and many other materials
Variable Speed Control
Side exhaust with noise reduction system
Locking throttle lever helps prevent
accidental start-up
Compact and lightweight design for working in
confined spaces
Great power/weight ratio
Insulated handle for operator comfort
and convenience
Uses twist lock sanding discs for quick installation
and removal (MAS-20B)
One year limited warranty
disc 1",
MAS-40 Abrasive disc 4”
MAS-20B Abrasive
1-1/2" & 2"
5.04” (128 mm)
7.08” (180 mm)
3.23”
(82 mm)
3.98” (101 mm)
Specifications
Model
Air Pressure
Air Consumption (No load)
Free Speed
Sanding Disc Diameter
MAS-20B
MAS-40
85 PSI
85 PSI
14.1 CFM
15.9 CFM
22,000 RPM
13,700 RPM
1" , 1-1/2" or 2"
4” max.
Chuck Size
1/4”
N/A
Hose Size
1/4” ID
3/8” ID
Weight
1.1 lbs.
2.0 lbs.
Accessories Included
• Threaded Adapter PT1/4” x NPT1/4”
• 14 mm Spanner
Optional Accessories (MAS-40)
• Threaded Adapter PT1/4” x NPT1/4”
• Hose Barb NPT1/4” x 3/8”
• 6 mm Allen Wrench
• 17 mm Spanner
• TA91354 Side Handle
• TQ00392 Adapter
24
PNEUMATIC DIE GRINDER
AIR SONIC
GRINDING
AIR SONIC
Features
• Ideal for most deburring, finishing and
grinding applications
• Precision machined with heavy-duty spindle
and support bearings
• Rear exhaust with patented noise
reduction system
• Suitable for industrial and production
applications
• Locking throttle lever helps prevent
accidental start-up
• Accepts most stone-type and rotary carbide
burrs with 1/4” shanks
• One year limited warranty
L-25B For all grinding, deburring and finishing jobs
5.35” (136 mm)
L-35C Ideal for rotary carbide burrs
6.73” (171 mm)
Specifications
Model
L-25B
L-35C
Air Pressure
85 PSI
85 PSI
Air Consumption
14.1 CFM
12.4 CFM
Free Speed
27,000 RPM
37,500 RPM
Chuck Size
1/4”
1/4”
Hose Size
1/4”
1/4”
1.3 lbs.
1.0 lbs.
Weight (without hose)
25
Accessories Included
• 1/8” Chuck Sleeve
• Sample Grinding Stone
• Spanner Wrench (14 mm)
Optional Accessory
• 3/16” Chuck Sleeve
• Air Hose
• Chuck Pin
* Stone type bits: Must be safety approved to operate at or above 37,500 RPM
• 1/8” Chuck Sleeve
• Sample Grinding Stone
• Spanner Wrench (14 mm)
• 3/16” Chuck Sleeve
• Air Hose
GRINDING
DRILLING
PNEUMATIC
DIE GRINDER
AIR SONIC
PNEUMATIC
HAND DRILL
AIR DRILL
Features
AL-55 High Speed Rotation 56,500 RPM
• Smooth high speed rotation and low vibration enables
precision grinding
• Step-less speed change from 0 to 56,500 RPM meets a
wide range of grinding applications
• Compact and light weight for comfortable operation over
long periods of time
• Triangular grip fits operator’s hand. Special plastic grip
prevents cold hands and absorbs vibration
• Rear exhaust system
5.08” (129 mm)
0.87” (22 mm) OD
Specifications
AL-55
Model
85 PSI
Air Pressure
6.0 CFM
Air Consumption
Free Speed
56,500 RPM
Chuck Size
1/8”
1/4”
Hose Size
0.55 lbs.
Weight (without hose)
Accessories Included
• Sample Grinding Stone
• Spanner Wrench (7 mm)
• Spanner Wrench (9 mm)
* Stone type bits: Must be safety approved to operate at or above 56,500 RPM
AIR DRILL
The power and performance you need
to drill deeper and faster
ADR-100
ADR-65
6.89” (175 mm)
Features
• Ultra high power to weight ratio
• Ergonomically designed to reduce
8.7” (221 mm)
6.61”
(168 mm)
6.06”
(154 mm)
•
•
•
•
Reversible
Specifications
Change rotation direction by turning the valve as indicated.
Model
ADR-65
ADR-100
Air Pressure
85 PSI
85 PSI
19.5 CFM
23.7 CFM
2,900 RPM
2,000 RPM
Air Consumption (no load)
Free Speed
Chuck Size
Hose Size
Weight (without hose)
Accessories Included
operator fatigue
Variable speed control
Reversible
Designed for industrial and
production applications
One year limited warranty
Forward
1/4” (6.5 mm) max. 3/8” (10 mm) max.
3/8”
3/8”
1.76 lbs.
2.42 lbs.
• 1/4” (65 mm) Drill Chuck • 3/8” (10 mm) Drill Chuck
• Chuck Key
• Chuck Key
• Threaded Adapter
• Threaded Adapter
PT3/8” x NPT3/8”
PT3/8” x NPT3/8”
Reverse
Variable
speed adjustment
Turn the speed control nut
to change the R.P.M.
26
PNEUMATIC BELT SANDER
BELTON
BELTON
SANDING
Ideal for sanding and grinding in narrow
spaces, recessed areas and on curved surfaces
Rear exhaust
system
B-10N
B-30N
11.77” (299 mm)
8.78” (223 mm)
5.98” (152 mm)
10.12” (257 mm)
B-20NB
9.84” (250 mm)
9.57” (243 mm)
The Idle Pulley
for B-20NB is
supported
on one side only.
Specifications
B-10N
85 PSI
14.2 CFM
17,000 RPM
3,470 FPM
3/8” x 13” (10 mm x 330 mm)
1/4”
1.5 lbs.
Model
Air Pressure
Air Consumption
Motor Free Speed
Belt Speed
Belt Size
Hose Size
Weight (without hose)
• Assortment of Sample Belts, 1 Each of
#60, #80, #100 and #120 grit
• Threaded Adapter PT1/4” x NPT1/4”
• 2 mm Allen Wrench
• 4 mm Allen Wrench
• Silencer
Accessories Included
B-20NB
85 PSI
18.4 CFM
17,000 RPM
8,200 FPM
3/4” x 20-1/2” (20 mm x 520 mm)
1/4”
2.6 lbs.
• Assortment of Sample Belts, 1 Each of
#60, #80, #100 and #120 grit
• Threaded Adapter PT1/4” x NPT1/4”
• 2.5 mm Allen Wrench
• 4 mm Allen Wrench
• Silencer
• Finger Pad Assembly
• Convex Shoe
B-30N
85 PSI
24.0 CFM
14,000 RPM
5,900 FPM
1-3/16” x 21-1/4” (30 mm x 540 mm)
1/4”
5.3 lbs.
• Assortment of Sample Belts, 1 Each of
#60, #80, #100 and #120 grit
• Threaded Adapter PT1/4” x NPT1/4”
• 5 mm Allen Wrench
• 4 mm Allen Wrench
• Silencer
• Sub Handle Assembly
• Grip Guard
Optional Parts
Optional Parts for B-10N
PN
Description
TQ10942
TB07283
TB05539
Shoe 6 (for 6 mm belt)
Bracket 6 Ass'y (for 6 mm belt)
Offset Bracket 10 Ass'y
Optional Parts for B-20N/B-20NB
PN
Description
TB07109
Offset Bracket 20 Ass'y
Optional Parts for B-30N
PN
Description
TB08150
Offset Bracket 30 Ass'y
Aluminum Oxide Sanding Belts for BELTON Sanders
27
B-10N/BB-10
B-20NB
3/8” x 13” or 10 mm x 330 mm Belt
3/4” x 20-1/2” or 20 mm x 520 mm Belt
B-30B
1-3/16” x 21” or 30 mm x 540 mm Belt
Part #
Belt Grit
Qty
Part #
Belt Grit
Qty
Part #
Belt Grit
Qty
@U40001
TP12438
TP12439
TP12440
TP12441
@U40002
TP12543
#40
#60
#80
#100
#120
#150
#180
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
TP01941
TP01936
TP01942
TP01943
TP01944
@U40004
TP02002
#40
#60
#80
#100
#120
#150
#180
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
TP04074
TP04084
TP04085
TP04086
TP04078
@U40006
TP04511
#40
#60
#80
#100
#120
#150
#180
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
20 pcs./set
SANDING
PNEUMATIC BELT SANDER
BABY BELTON
BELTON
Features
• Compact and lightweight, yet powerful
• Reversible rotation direction
• Ergonomically designed for left or right hand
operator convenience
BB-10A
9.69” (246 mm)
3.11”
(79 mm)
Specifications
Model
Air Pressure
Air Consumption
Motor Free Speed
Belt Speed
Belt Size
Hose Size
Weight (without hose)
BB-10A
85 PSI
8.8 CFM
16,000 RPM
3,800 FPM
3/8” x 13” (10 mm x 330 mm)
1/4”
1.3 lbs.
Accessories Included
• Assortment of Sample Belts, 1 Each of
#100, #120, #180, and #240 grit
• 1.5 mm Allen Wrench
Ideal for deburring, chamfering,
bead grinding, and polishing applications
Deburring & chamfering of
uneven edge and plate surfaces
Curved and
unique profiles
Lever position can be changed for right
or left hand operator convenience.
For right-handed
user
For left-handed
user
Belt rotation direction
can be changed.
Detail finishing
Deburring of
thin materials
Forward
Reverse
28
PORTABLE
CHAMFERING TOOLS
MINI BEVELER/CIRCUIT BEVELER
CHAMFERING
Handy Electric Chamfering Tool
MINI BEVELER
EMB-0307B
Double insulation
Features
12.46” (316.4 mm)
Stainless Steel
3C
4R
7.46”
(189.6 mm)
Mild Steel
7C
7.05” (179 mm)
Specifications
Power Supply
EMB-0307B
Mild Steel(mm) Chamfer
X
Y
Y
Y
3
7
7
3.8
3.8
6.6
3.8
1.5
5.6
Chamfer
Stainless Steel(mm)
Angle
45˚
30˚
15˚
Model
EMB-0307B
Material
Stainless
Steel
Mild Steel
Radius(mm)
2, 3, 4
2, 3, 4
220 V - 240 V A/C, 50/60 Hz
1010 W
Rated Power Consumption
X
4.6 A
Rated Current
Straight
Radius
Chamfering Capacity (Stainless Steel)
Round
Straight Tip (2 pcs. / set)
1/16” (2 mm) Radius Tip (2 pcs. / set)
1/8” (3 mm ) Radius Tip (2 pcs. / set)
5/32” (4 mm) Radius Tip (2 pcs. / set)
Continuous
Rated Duty Cycle
Chamfering Capacity (Mild Steel)
Available Cutting Tips for EMB-0307B and AMB-0307
Part #
Description
TV7A019
TV7A020
TV7A021
TV7A022
EMB-0307B
Model
4R
Chamfer angle, width and radius
X
3
2.2
1
• Operates on single phase 230V current
• Ideal for edge beveling pipe, tube, and plate
• Designed to bevel stainless and carbon steels
• Powerful 1-1/2 horsepower double insulated motor
• Adjustable to bevel angles 15˚ - 45˚
• Bevel widths up to 5/16” on mild steel
• Uses indexable carbide inserts
• Swarf and chip collection box included
• One year limited warranty
Up to 5/16” (7 mm) Chamfer or
1/16” (2mm), 1/8” (3 mm),
5/32” (4 mm) Radius
Up to 1/8” (3mm) Chamfer or
1/16” (2 mm), 1/8” (3 mm),
5/32” (4 mm) Radius
Chamfering Angle
15 - 45 Degrees
Power Cord Length
13.1 Feet (4 Meters)
Weight
8.6 lbs. (3.9 kg)
Accessories Included
• 4 mm Allen Wrench
• Straight Cutting Tip
• (2) Hex. Nut M8
• (2) Hex. Socket Set Screws 8 mm x 25 mm
• (3) Pan Head Screws 5 mm x 10 mm
• Torx 15 (T-15) Spanner Wrench
• Chip Collector Box Assembly
• Spare Carbon Brush Assembly (1 Set)
Pneumatic Radial Chamfering Tool
CIRCUIT BEVELER CB-02
Features
5.35” (136 mm)
• Lightweight and compact for most beveling
and chamfering applications
• Uniquely designed to bevel circular, elliptical
and straight line profiles
Mild Steel
2C
4.57” (116 mm)
2R
• Bevels exterior and/or interior edges
• Bevel widths up to 5/64” at 45˚
• Depth gauge provided to accurately set
bevel widths
• Optional attachment #TB02437 available for
chamfering and/or beveling thin materials
• Uses indexable carbide inserts
• One year limited warranty
29
PORTABLE
CHAMFERING TOOLS
CHAMFERING
MINI BEVELER/CIRCUIT BEVELER
Pneumatic Chamfering Tool
MINI BEVELER
AMB-0307
Stainless Steel
7.95” (202 mm)
3C
Features
• Lightweight design for portable edge
Mild Steel
beveling applications
7C
• Ideal for beveling plate, pipe, tube and
4R
4.96”
(126 mm)
•
•
•
•
•
•
7.09” (180 mm)
Chamfer angle, width and radius
AMB-0307
Stainless Steel(mm)
Mild Steel(mm)
X
Y
X
Y
7
7
3
3
4
7
2.2
3.8
2.2
8
1
3.8
Chamfer
Angle
45˚
30˚
15˚
Chamfer
X
Specifications
Y
Straight
Stainless
Steel
Mild Steel
Radius(mm)
2, 3, 4
2, 3, 4
85 PSI
31.8 CFM
Air Consumption
Radius
Material
AMB-0307
Model
Air Pressure
AMB-0307
Model
other profiles
Designed to bevel stainless and carbon steels
Adjustable to bevel angles from 15˚ - 45˚
300 mm (12”) minimum radius bend
Bevel widths up to 9/32” at 45˚
Uses indexable carbide inserts
One year limited warranty
Up to 5/16” (7 mm) Chamfer or
1/16” (2mm), 1/8” (3 mm),
5/32” (4 mm) Radius
Chamfering Capacity (Stainless Steel)
Round
Chamfering Capacity (Mild Steel)
Available Cutting Tips for EMB-0307B and AMB-0307
Part #
Description
TV7A019
TV7A020
TV7A021
TV7A022
Straight Tip (2 pcs. / set)
1/16” (2 mm) Radius Tip (2 pcs. / set)
1/8” (3 mm ) Radius Tip (2 pcs. / set)
5/32” (4 mm) Radius Tip (2 pcs. / set)
Up to 1/8” (3mm) Chamfer or
1/16” (2 mm), 1/8” (3 mm),
5/32” (4 mm) Radius
Chamfering Angle
15 - 45 Degrees
Weight
6.4 lbs. (2.9 kg)
• Threaded Adapter PT3/8” x NPT 3/8”
• 3 mm Allen Wrench
• 4 mm Allen Wrench
• Straight Cutting Tip
• (2) Hex. Nut M8
• (2) Hex. Socket Set Screw 8 mm x 25 mm
• Torx 15 (T-15) Spanner Wrench
Accessories Included
Chamfer angle, width and radius
Hand beveler, ideal for edge
beveling circular, elliptical
and straight line profiles
CB-02
Chamfer
Angle
45˚
X
Chamfer
Mild Steel(mm)
X
Y
2
2
Model
CB-02
Material
Mild Steel
Radius(mm)
2
Radius
Y
Straight
Round
Specifications
Model
CB-02
Air Pressure
85 PSI
Air Consumption
Chamfering Capacity (Mild Steel)
Chamfer Angle
Weight
Accessories Included
Chamfering range of operation
Min. Diameter
Min. Radius
Min. Depth
14.1 CFM
Up to 5/64” (2 mm) Chamfer
or 1/16” (2 mm Radius)
45˚
4.0 lbs. (1.8 kg)
• Threaded adapter PT1/4” x NPT1/4”
• Straight Cutting Tip
• Hook Spanner
• Cutting Depth Adjustment Gauge
• Torx 9 (T-9) Spanner Wrench
• Protective Cap
Available Cutting Tips
Part #
TV7A010
TV7A011
Description
Straight Tip (2 pcs. / set)
1/16” (2 mm) Radius Tip (2 pcs. / set)
30
PORTABLE PRECISION FINISHING FILE
SUPER HAND
SUPER HAND
FILING
Fast, efficient filing, sanding and
deburring tools
Features
• Eliminates time consuming manual hand-filing operations
• Ideal for industrial and production filing applications on
steel, aluminum, brass, wood and other materials
• Unique and compact design delivers reduced vibration
performance while reducing operator fatigue
• Interchangeable files
• Rear exhaust system
• One year limited warranty
SH-100A
ASH-900
6.97” (177 mm)
7.17” (182 mm)
Weight reduced by half for
comfortable operation over long
periods of time
SF-10 Rat Tail File
Specifications
Model
Air Pressure
Air Consumption (No load)
SF-11 Triangular Taper File
SF-12 Half Round File
SF-13 Flat Bastard File
SH-100A
ASH-900
85 PSI
85 PSI
8.5 CFM
7.1 CFM
Stroke Speed
3,700 SPM
6,300 SPM
Stroke Length
9 mm
9 mm
File Shank Size
6.3 mm
5.0 mm
Weight
2.4 lbs.
1.1 lbs.
• Threaded Adapter PT1/4” x NPT1/4”
• 3 mm Allen Wrench
• SF-10 Rat Tail File
• SF-11 Triangular Taper File
• SF-12 Half Round File
• SF-13 Flat Bastard File
• Threaded Adapter PT1/4” x NPT1/4”
• 2.5 mm Allen Wrench
• SF-10 Rat Tail File
• SF-11 Triangular Taper File
• SF-12 Half Round File
• SF-13 Flat Bastard File
Accessories Included
Optional Accessories
TA91752
TBO4319
Rubber Pad Ass'y for SH-100A
Sanding Pad Ass'y for ASH-800/ASH-900
TA94625
Chuck Ass'y for SH-100A
(use with TA91752)
31
For Super Hand SH-100A , ASH-800 & ASH-900
PN
Description
TA9A222
TA9A223
TA9A224
TA9A225
TA91752
TA94625
TB04319
SF-10 Rat Tail File (5 pcs./set)
SF-11 Triangular Taper File (5 pcs./set)
SF-12 Half Rounded File (5 pcs./set)
SF-13 Flat Bastard File (5 pcs./set)
Rubber Pad Ass'y for SH-100A
Chuck Assembly for SH-100A
Sanding Pad Ass'y for ASH-800/ASH-900
MICRO AIR HAND
Lightweight, ultra-low vibration filer
for polishing and lapping operations
MAH-05/MAH-16
MAH-16
MAH-05
6.30” (176 mm)
.83” (21 mm) OD
.09”
2.2 mm
.02”
0.5 mm
Specifications
Model
ok
Str e
S tr
MAH-05
0.5
Air Pressure
ok e
MAH-16
2.2
mm
mm
Diamond files (5pcs/set)
Round end file (PN TB07503)
MAH-16
85 PSI
85 PSI
2.5 CFM
2.5 CFM
Stroke Speed
22,000 SPM
11,000 SPM
Stroke Length
0.5 mm
2.2 mm
3 mm
3 mm
0.8 lbs.
0.8 lbs.
File Shank Size
Weight
ø1
4.5
ø3
ø3
Flat end file (PN TB07502)
Air Consumption (No load)
MAH-05
65
1.5
65
• Threaded Adapter PT1/4”x NPT1/4” • Flat End File
• 2 mm Allen Wrench
• Round End File
ø3
Half-round end file (PN TB07505)
Vice Holder (PN TB07506)
2
Triangular end file (PN TB07504)
ø3
Accessories Included
65
2
R1
This holder can be used for polishing and lapping
applications by mounting ceramic stones, etc.
(Max size: Thickness 3.2 mm × Width 20 mm)
65
1
2
0.5
2
Mounting examples
SUPER SAW
Special double-piston system provides low
vibration while improving cutting speed!
SSW-110
Specifications
8.07” (205 mm)
Model
Air Pressure
Optional Accessories
Part #
Air Consumption (No load)
Description
TV7A005 32 TPI for Sheet Metal,
Ferrous Metal (5 blades/set)
TV7A006 24 TPI for Ferrous Metal, NonFerrous Metal (5 blades/set)
TV7A007 18 TPI for Wood, Plastic, NonFerrous Metal (5 blades/set)
TV7A008 14 TPI for Wood, Plastic
(5 blades/set)
SSW-110
85 PSI
10.2 CFM
Stroke Speed
7,000 SPM
Stroke Length
11 mm (7/16”)
Weight
Accessories Included
1.37 lbs.
• Threaded Adapter PT1/4” x NPT1/4”
• 3 mm Allen Wrench
• (2) Sample 32 TPI Saw Blades
32
HANDY PNEUMATIC SANDER
FREE SANDER
SANDING
FREE SANDER
Super lightweight,
low-vibration design
Features
• Ideal for sanding and surface finishing wood, metal,
plastic and other materials
• Lightweight design with minimal vibration
• High output and low air consumption motors
produce high speed orbits for swirl-free finishes
• Oil free design
• Suitable for industrial and production applications
• One year limited warranty
Powerful turbine motor
Produces ultra-high speed
orbits for super-fine
finishing of all materials
FS-100C
FS-50A
4.33” (110 mm)
2.95” (75 mm)
3.94” (100 mm)
3.23” (82 mm)
Specifications
Model
Model
Air Pressure
Air Consumption
Free Speed
Orbit Diameter
Pad Size
Paper Size
Weight
Accessories Included
33
FS-100C
FS-50A
85 PSI
85 PSI
7.1 CFM
4.9 CFM
20,000 RPM
15,000 RPM
1/16”
3/64”
4” x 4-3/8”
3” x 3-3/16”
4-1/2” x 5-1/2” (1/4 Sheet)
2-3/4” x 4-1/2” (1/8 Sheet)
1.1 lbs.
1.1 lbs.
• Threaded Adapter PT1/4” x NPT1/4”
• Hose Sub Assembly
• Sample Sanding Papers
• Threaded Adapter PT1/4” x NPT1/4”
• Hose Sub Assembly
• Sample Sanding Papers
SANDING
PNEUMATIC RECIPROCATING SANDER
LINE SANDER
Ideal for inline and grain
sanding applications
LINE SANDER
Features
• Ideal for most inline and profile
sanding applications
• Compact and lightweight 1.6 lb. design
• Low vibration and minimal noise output
• Suitable for sanding steel, aluminum, wood, plastic
and other materials
• Available with dust collection assembly
• One year limited warranty
LS-10
4.06” (103 mm)
2.17” (55 mm)
Double Piston Alignment
Special double-action minimizes both noise
and vibration.
Specifications
Model
Air Pressure
Air Consumption
Special Sanding Pad
The Block Rubber Pad Assembly
can be easily trimmed to conform to
the shape being worked and is
available as an accessory.
LS-10
85 PSI
3.9 CFM
Stroke Speed
4,000 SPM
Stroke Length
5/32”
Pad Size
Paper Size
Weight
Accessories Included
2-5/32” x 4-1/16”
2-1/4” x 5-1/2” (1/8 Sheet)
1.6 lbs.
• Threaded Adapter PT1/4” x NPT1/4”
• Hose Barb
• Hose Sub Assembly
• Block Pad Assembly
• Sample Sanding Papers
34
PNEUMATIC COMPACT SANDER
PALM ORBITAL SANDER
SANDING
Heavy-duty and powerful with
adjustable speed regulator
ORBITAL SANDER
OSV-60A
Features
• Powerful 3/4 horsepower dual action
for tough applications
• Also available with 5” pad (OSV-50A)
• Standard with dust extraction system
• Rugged construction for years of
9.65” (245 mm)
reliable performance
• One year limited warranty
Specifications
Model
Air Pressure
Air Consumption (No load)
Free Speed
Orbit Diameter
Paper Size
Pad Type
OSV-60A
Accessories Included
85 PSI
24.1 CFM
• Threaded Adapter PT1/4” x NPT1/4”
• Dust Collection Assembly with
Dust Bag
• Spanner Wrench (17 mm)
8,500 RPM
3/8”
6” Diameter
PSA
Horsepower
.75 HP
Weight
4.4 lbs.
PALM ORBITAL
Ergonomic
SANDER lightweight design
APS-125/150
For Self-Vacuum & Central Vacuum
The non-vacuum model is available from
stock and can easily be modified to selfvacuum or central vacuum.
Self-Vacuum
Central Vacuum
5.71” (145 mm)
Non Vacuum
Features
Specifications
• Compact and lightweight 1.6 lb. design
• Ergonomically designed for operator
Model
•
•
convenience and comfort
Powerful high speed 10,000 RPM motor
Ultra small orbital action for high quality
swirl-free finishes
Available with 5” or 6” pads
Variable speed control
One year limited warranty
•
•
•
Applications
35
Feather edging, metal preparation, and
finishing work on body filler.
Curved surface sanding and corner rounding
in wood work.
Air Pressure
Air Consumption
Free Speed
Orbit Diameter
Paper Size
Pad Type
Spindle Thread
Horsepower
Weight
Accessories Included
APS-125
APS-150
85 PSI
85 PSI
15.9 CFM
15.9 CFM
10,000 RPM
10,000 RPM
3/16”
3/16”
5” Diameter
6” Diameter
PSA
PSA
5/16”-24
5/16”-24
.37 HP
.37 HP
1.52 lbs.
1.59 lbs.
• Threaded Adapter PT1/4” x NPT1/4”
• Spanner
SAFETY GUIDE
Be sure to read and understand all safety precautions mentioned below and to follow the instructions given to operate each
Nitto Kohki brand tool as stated in the operator’s manual. Keep operators manual close by when operating machines or tools
for reference of safe operation and precautions.
Safety Precautions
Failure to observe the following warnings may cause a potentially hazardous situation, which if not corrected could result
in serious injury or death. To prevent the risk of fire, electric shock, and/or personal injury, proper safety guidelines should
be followed at all times.
Warning for ALL Machines and Tools
• Always keep the work area free from clutter and potentially dangerous
conditions such as hanging power cords, working debris, air hoses, and
garbage to prevent accidents from occurring.
• Consider proper working environments for each tool carefully. Do not
expose tools to extreme amounts of moisture or direct contact with water
or rain. Keep area well lit at all times to prevent hidden dangers and never
operate the equipment near flammable liquids or in gaseous or explosive
atmospheres.
• Keep all tools and tool accessories away from children and all unauthorized
personnel. Serious injury or possible death may result from machines
being handled by children.
• Properly store machines and accessories while not in use. They should be kept
in a dry, locked-up location out of reach of children or unauthorized personnel.
• Improper or negligent use of tools will cause increased maintenance costs,
and the amount of time in which to complete the job. Always let the tool
do the work at the rate of which it was designed. Best performance is
always achieved by reading and understanding the proper operation of
each machine or tool.
• Always wear safety glasses and protective hand and foot wear during or
around operating tools. Wear a protective hair covering to contain long
hair. Do not wear loose clothing and/or accessories as they may be caught
in moving parts and inflict serious injury or possible death.
• Wear respiratory protection when working in an environment where dust
particles are generated during operation.
• Do not over-reach or allow yourself to become unstable during tool
operation and always maintain a correct posture.
• Use clamps or a vise to secure the work piece tightly and eliminate
vibration. Never hold the work piece with your hands, keep both hands on
the tool for increased productivity.
• Use the right tool or machine that can complete the job within its
specifications. Do not attempt to adapt smaller machines or tools to
complete a job designed for heavy-duty equipment. Do not use the tools
for other than what they were designed for. There is a right tool for each
job, be aware of tool limitations and never overload.
• Make sure to inspect all external screws, nuts, bolts and attached accessories
are fastened tightly and secure prior to each use. All moving parts should be
free from obstruction and allowed to operate smoothly. Any damaged or
missing parts should be repaired or replaced by the sales agent or distributor
from which the tool was originally purchased. Do not use machines or tools
which cannot be activated or stopped with a power switch or lever.
• Do not use any machine with a damaged, frayed, cut, or deteriorated
power cords or air hoses. Always replace at the first sign of damage.
• Always remove all tools required to adjust, add, or remove parts from tools
prior to use to prevent tool damage or user injury.
• Always avoid an unexpected start by having all power buttons or levers in
the off position prior to attaching to a power or air supply. Never carry
tools with your finger on the on/off switch or lever when the power or air
supply is attached.
• Do not use the power or air supply lines to move, carry or support the tool
during usage or transportation. Do not place the power or air line near a
heat source, oil, water, or items with sharp edges.
• Never leave a machine or tool running unattended. Keep a firm grip on the
designated areas of the machine or tool until it comes to a complete stop.
Always turn the power switch or lever to the off position and disconnect
from the power source when not in use.
• Do not disassemble or modify a tool to complete a job other than what it
was designed for. This will void any warranty on the equipment and may
cause serious personal injury or possible death.
• Maintenance is necessary for all machines and tools. Always maintain
blades and cutters properly and replace when edges become damaged or
are not sharp enough for safe operation. Follow the instruction manual for
lubrication needs and adjustment points if applicable. Check the power and
air supply lines periodically and change accordingly to safety regulations.
If an extension line is adopted, always make sure that it meets or exceeds
tool requirements for amperage or air supply before using and is rated for
outdoor usage. Change supply lines whenever they are found to be
defective or damaged. Keep the grip and handles dry and clean of grease
or oil so that it will not disturb proper operation.
• Switch off and disconnect from power source before servicing equipment
or changing accessories.
• Be alert and pay close attention to the work being performed at all times.
Do not operate machines or tools when heavily fatigued. Users should be
aware of all circumstances surrounding their application.
• Use only recommended parts and accessories as per individual machine or
tool operator manuals. Use of improper accessories or attachments may
result in serious injury or possible death.
• All repairs and services must be performed by authorized Nitto Kohki dealers
or technicians.
• Do not deface or remove any label, warning indicator, or nameplate
associated with each machine or tool.
Notice for Electric Tools
Notice for Air Tools
• The power source must be limited to the individual tools specifications as
stated on the nameplate or instruction manual.
• Make sure that all machine and power tools are properly grounded at all times
(excludes double-insulated tools). Always use a GFCI (Ground-Fault-CircuitInterrupt) to protect the user and surrounding persons from electric shock.
• Be aware of low voltage situations. Improperly gauged extension cords or
power cords used or shared with other electrical devices will cause all tools
on the line to not run at optimal performance. This condition may result in
damage to the machine and/or operator.
• Air pressure at the inlet of the tool must not exceed 0.6 MPa (6 kgf/cm2).
36
QUICK CONNECTIVE COUPLINGS FOR PNEUMATIC TOOLS
HI CUPLA series
HI CUPLA / HI CUPLA 200 (One-touch connection & Big flow rate type)
One-way shut-off cupla with an automatic shut-off
valve in the socket.
Important parts are hardened for excellent wear
resistance and durability.
P
Plug
S
For hose connection
For 1/4" hose
17SH
For 1/4" hose
20SH
For 3/8" hose
30SH
For female thread connection
For Rc 1/8"
10SM
For Rc 1/4"
20SM
For Rc 3/8"
30SM
For male thread connection
For R 1/4"
20SF
For R 3/8"
30SF
For R 1/2"
40SF
For hose connection
40PH
For 1/2" hose
For 1/2" hose
17PH
For 1/4" hose 400PH
For 3/4" hose
20PH
For 1/4" hose 600PH
For 1" hose
30PH
For 3/8" hose 800PH
For female thread connection 40PM
For Rc 1/2"
400PM
For Rc 1/2"
10PM
For Rc 1/8"
600PM
For Rc 3/4"
20PM
For Rc 1/4"
800PM
For Rc 1"
30PM
For Rc 3/8"
For male thread connection
400PF
For R 1/2"
20PF
For R 1/4"
600PF
For R 3/4"
30PF
For R 3/8"
800PF
For R 1"
40PF
For R 1/2"
For male thread connection (parallel thread)
20PFF
For G 1/4"
Hi Cupla 200
Hi Cupla
Steel (chrome-plated)
Steel (chrome-plated)
1/8", 1/4", 3/8", 1/2", 3/4", 1" 1/8", 1/4", 3/8", 1/2"
1.0 MPa
1.5 MPa
1.5 MPa
2.0 MPa
NBR
NBR
-5˚C - 60˚C
-20˚C - 80˚C
HI CUPLA ACE
40SH
400SH
600SH
800SH
40SM
400SM
600SM
800SM
For 1/2" hose
For 1/2" hose
For 3/4" hose
For 1" hose
For Rc 1/2"
For Rc 1/2"
For Rc 3/4"
For Rc 1"
400SF
600SF
800SF
For R 1/2"
For R 3/4"
For R 1"
For hose connection
200-17SH For 1/4" hose 200-40SH For 1/2" hose
200-20SH For 1/4" hose
200-30SH For 3/8" hose
For female thread connection
200-20SM For Rc 1/4"
200-30SM For Rc 3/8"
200-40SM For Rc 1/2"
For male thread connection
200-20SF For R 1/4"
200-30SF For R 3/8"
200-40SF For R 1/2"
Specifications
Type
Body material
Size
Working pressure
Pressure resistance
Packing material
Working temp.range
Socket
Plastic Cuplas with a built-in locking mechanism!
Pressure ratings comparable to steel Cuplas.
Specifications
Body material
Size
Working pressure
Pressure resistance
Packing material
Working temp.range
Plastic Plug
For hose connection (PH)
20PH-PLA
For 1/4" hose
30PH-PLA
For 3/8" hose
For female thread connection (PM)
20PM-PLA For Rc 1/4"
30PM-PLA For Rc 3/8"
For urethane hose with spring nut connection (PNG)
50PNG-PLA For 5 ID × 8 OD hose
65PNG-PLA For 6.5 ID × 10 OD hose
85PNG-PLA For 8.5 ID × 12.5 OD hose
For male thread connection (PF)
20PFF-PLA For G 1/4"
37
Engineering plastics
1/4", 3/8", others
1.5 MPa
2.0 MPa
NBR
-5˚C - 60˚C
P
S
Hi Cupla Ace Socket
For hose connection (SH)
HA-20SH
For 1/4" hose
HA-30SH
For 3/8" hose
For female thread connection (SM)
HA-20SM
For Rc 1/4"
HA-30SM
For Rc 3/8"
For urethane hose with spring nut connection (SNG)
HA-50SNG For 5 ID × 8 OD hose
HA-65SNG For 6.5 ID × 10 OD hose
HA-85SNG For 8.5 ID × 12.5 OD hose
Hi Cupla Ace T type (for 2 branches)
HA-T
20P-PLA / HA-65S × 2
OTHER PRODUCT LINES
"delvo" Electric Screwdrivers,
Linear-motor-driven Free Piston System
Professional Tools for High Technology
NITTO KOHKI "delvo" Electric Screwdrivers are high-quality tools for professional use,
with special emphasis on precise control of torque and long life. They apply just the
correct amount of torque –with sure, positive control always at your fingertips.
They're smooth and shockless in operation, too. NITTO KOHKI's customer-oriented
service system is directly connected to sales agents to ensure that
DLV30SP-MKG
you can use "delvo" Electric Screwdrivers with confidence.
Models
DLV7300 Series
DLV7500/8500 Series
DLV7000/8000 Series
DLV7100/7200/8100/8200 Series
DLV3100/3300 Series
DLV5720/5720H/5740/5740H/5750 Series
DLV5800 Series
DLV30SP/30HP-MKG (with built-in brushless motors)
DLV30HP-MKG
DLV5720/5720H/5740 Series
MEDO USA, Inc. offers linear motor-free piston system air compressors and
vacuum pumps, featuring unique, quiet, oil-free operation with
high reliability and long life. This design theory uses a
resonant spring mass piston
assembly energized by a
pulsating magnetic field.
The functionally elegant
design, with only one moving
part, is ideally suited for a
variety of applications.
38
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement