Foxconn A85GM motherboard

Foxconn A85GM motherboard
A85GM Series Motherboard
User’s Manual
Statement:
This manual is the intellectual property of Foxconn, Inc. Although the information
in this manual may be changed or modified at any time, Foxconn does not obligate
itself to inform the user of these changes.
Trademark:
All trademarks are the property of their respective owners.
Version:
User’s Manual V1.0 for A85GM Series motherboard.
P/N: 3A221RQ00-000-G
CA
UT
IO
N
Symbol description:
!
Caution : refers to important information that can help you to use motherboard
better, and tells you how to avoid problems.
NING
AR
!
W
Warning : indicating a potential risk of hardware damage or physical injury
may exist.
WEEE:
The use of this symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased this product.
More information:
If you want more information about our products, please visit Foxconn’s
website: http://www.foxconnchannel.com
© All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
All images are for reference only, please refer to the physical motherboard for specific features.
Declaration of conformity
HON HAI PRECISION INDUSTRY COMPANY LTD
66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
TAIPEI HSIEN, TAIWAN, R.O.C.
declares that the product
Motherboard A85GM
is in conformity with
(reference to the specification under which conformity is declared in
accordance with 89/336 EEC-EMC Directive)
■ EN 55022:1998/A2: 2003 Limits and methods of measurements of radio disturbance characteristics of information technology equipment
■ EN 61000-3-2/:2000 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits for harmonic current emissions
(equipment input current <= 16A per phase)
■ EN 61000-3-3/A1:2001 Electromagnetic compatibility (EMC)
Part 3: Limits
Section 2: Limits of voltage fluctuations and flicker in low voltage supply systems for equipment with rated current <= 16A
■ EN 55024/A2:2003 Information technology equipment-Immunity characteristics limits and methods of measurement
Signature : Printed Name : James Liang Place / Date : TAIPEI/2009
Declaration of conformity
Trade Name:
FOXCONN
Model Name:
Responsible Party:
Address:
Telephone:
Facsimile:
A85GM
Equipment Classification:
Type of Product:
Manufacturer:
Address:
FCC Class B Subassembly
Motherboard
HON HAI PRECISION INDUSTRY
COMPANY LTD
66 , CHUNG SHAN RD., TU-CHENG
INDUSTRIAL DISTRICT, TAIPEI HSIEN, TAIWAN, R.O.C.
PCE Industry Inc.
458 E. Lambert Rd.
Fullerton, CA 92835
714-738-8868
714-738-8838
Supplementary Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions : (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Tested to comply with FCC standards.
Signature : Date :
2009
Installation Precautions
NING
AR
!
W
■
CA
UT
IO
N
■
!
■
■
■
■
■
■
■
■
Electrostatic discharge (ESD) is the sudden and momentary electric current
that flows between two objects at different electrical potentials. Normally it
comes out as a spark which will quickly damage your electronic equipment.
Please wear an electrostatic discharge (ESD) wrist strap when handling
components such as a motherboard, CPU or memory.
Ensure that the DC power supply is turned off before installing or removing
CPU, memory, expansion cards or other peripherals. It is recommended to
unplug the AC power cord from the power supply outlet. Failure to unplug
the power supply cord may result in serious damage to your system.
Please carefully read the following procedures to install your computer :
It is suggested to select high-quality, certified fans in order to avoid damage
to the motherboard and CPU due to high temperature. Never turn on the
computer if the CPU fan is not properly installed.
We cannot guarantee that your system can operate normally when your
CPU is overclocked. Normal operation depends on the overclocking capacity of your device.
If there is any, when connecting USB, audio, RS232 COM, IrDA or S/PDIF
cables to the internal connectors on the motherboard, make sure their
pinouts are matching with the connectors on the motherboard. Incorrect connections might damage the motherboard.
When handling the motherboard, avoid touching any metal leads or connectors.
If there is a PCI Express x16 graphics card installed in your system, we
recommend using a 24-pin ATX power supply to get the best performance.
Before turning on the power, please make sure the power supply AC input
voltage setting has been configured to the local standard.
To prevent damage to the motherboard, do not allow screws to come in contact
with the motherboard circuit or its components. Also, make sure there are no
leftover screws or metal components placed on the motherboard or within the
computer casing.
If you are uncertain about any installation steps or have a problem related to
the use of the product, please consult a certified computer technician.
Table of Contents
Chapter 1 Product Introduction
Product Specifications...............................................................................2
Layout.......................................................................................................4
Back Panel Connectors.............................................................................5
Chapter 2 Hardware Install
Install the CPU and CPU Cooler...............................................................8
Install the Memory...................................................................................10
Install an Expansion Card.......................................................................12
Install other Internal Connectors.............................................................13
Jumpers...................................................................................................17
Chapter 3 BIOS Setup
Enter BIOS Setup....................................................................................19
Main Menu..............................................................................................19
System Information.................................................................................21
Advanced BIOS Features.......................................................................23
FOX Central Control Unit........................................................................25
Advanced Chipset Features....................................................................30
Integrated Peripherals.............................................................................34
Power Management Setup . ..................................................................38
PC Health Status.....................................................................................40
BIOS Security Features...........................................................................41
Load Optimal Defaults.............................................................................41
Save Changes and Exit...........................................................................41
Discard Changes and Exit.......................................................................41
Chapter 4 CD Instruction
Utility CD Introduction.............................................................................43
FOX ONE
Main Page.........................................................................................46
CPU Control......................................................................................50
Frequency Control.............................................................................52
Limit Setting......................................................................................53
Voltage Control..................................................................................55
Fan Control.......................................................................................56
FOX LiveUpdate
Local Update.....................................................................................57
Online Update...................................................................................59 Configure . ........................................................................................62
About & Help.....................................................................................64
FOX LOGO..............................................................................................65
FOX DMI.................................................................................................66
Chapter 5 RAID Configuration
RAID Configuration Introduction.............................................................69
Option ROM Utility...................................................................................71
Create a RAID Driver Diskette................................................................73
RAID Enable in BIOS..............................................................................75
Select a RAID Array for Use....................................................................75
Install a New Windows XP......................................................................88
Setting Up a Non-Bootable RAID Array..................................................92
Technical Support :
Support
Website :
http://www.foxconnchannel.com
Support Website :
http://www.foxconnsupport.com
Worldwide online contact Support :
http://www.foxconnsupport.com/inquiry.aspx
CPU Support List :
http://www.foxconnsupport.com/cpusupportlist.aspx
Memory, VGA Compatibility List :
http://www.foxconnsupport.com/complist.aspx
Thank you for buying Foxconn A85GM Series motherboard.
Foxconn products are engineered to maximize computing power,
providing only what you need for break-through performance.
With advanced overclocking capability and a range of connectivity
features for today multi-media computing requirements, A85GM
enables you to unleash more power from your computer.
This chapter includes the following information:
■
Product Specifications
■
Layout
■
Back Panel Connectors
1
1-1 Product Specifications
CPUSupport the AMD PhenomII, Phenom, AMD Athlon II, Athlon, AMD Sempron
processor families, AM2/AM2+/AM3 socket processors
HyperTransportUp to 5200MT/s (HT3.0)
ChipsetNorth Bridge: AMD 785G
South Bridge: AMD SB750
Memory 4 x 240-pin DDR2 DIMM sockets
Support up to 8GB of system memory
Dual channel DDR2 1066/800/667MHz architecture
Integrated Graphics
Integrated ATI ATI RV620 GPU
SidePort Memory-DDR3 1333 128MB Memory(Optional)
Support Full HD HDMI Technology
Support Hybrid CrossFireX
Dual independent displays support with HDMI/DVI and D-Sub
AudioRealtek 8-channel audio chip
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out
Support Jack-Sensing function
LANBroadcom 10/100/1000Mb/s LAN chip
Expansion Slots 1 x PCI Express x16 slot
1 x PCI Express x1 slot
2 x PCI slots
Onboard Serial ATA 5 x SATA connectors
1 x ESATA connector
300MB/s data transfer rate
Support hot plug and NCQ (Native Command Queuing )
USBSupport hot plug
Support up to 10 x USB 2.0 ports (6 rear panel ports, 2 onboard USB
headers supporting 4 extra ports)
Support USB 2.0 protocol up to 480Mb/s
Internal Connectors1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
5 x SATA connectors
1 x ESATA connector
2 x USB 2.0 connectors (supporting 4 x USB devices)
1 x CPU fan header (4-pin)
2 x System fan headers (4-pin)
1 x SPDIF_OUT Connector
1 x TPM Connector (Optional)
1 x Floppy Connector
1 x IDE Connector
1 x Front panel connector
1 x CD_IN connector
CA
UT
IO
N
Form FactorMicro ATX Form Factor, 9.6 inches x 9.6 inches (24.4cm x 24.4cm)
!
The chipset driver of this motherboard does not support Windows® 2000.
1
1 x Front Audio connector
1 x IrDA connector
1 x Chassis intrusion alarm header (INTR)
1 x Speaker connector
1 x COM1 connector
Back Panel1 x PS/2 Mouse port
Connectors1 x PS/2 Keyboard port
1 x VGA port
1 x HDMI port
1 x DVI-D port
6 x USB 2.0 ports
1 x RJ-45 LAN port
8-channel Audio ports
Hardware MonitorSystem voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU overheating warning
CPU/System fan speed control
PCI Express x1Support 500MB/s (1GB/s concurrent) bandwidth
Low power consumption and power management features
PCI Express x16Support 8GB/s (16GB/s concurrent) bandwidth
Low power consumption and power management features
Green FunctionSupport ACPI (Advanced Configuration and Power Interface)
Support S0 (normal), S1 (power on suspend), S3 (suspend to RAM), S4
(suspend to disk), and S5 (soft - off)
Bundled SoftwareFOX ONE
FOX LiveUpdate
FOX LOGO
FOX DMI
Operating SystemSupport for Microsoft® Windows® Vista/XP only
1-2 Layout
1
4
3
2
1
5
6
25
7
8
24
9
23
10
22
11
21
12
13
14
15
16
17
18
1. 4-pin ATX 12V Power Connector
19
20
14. System Fan Header
15. COM1 Connector
16. ESATA Connector
17. IDE Connector
18. 24-pin ATX Power Connector
19. Floppy Connector
20. TPM Connector (Optional)
21. IrDA Connector
22. DDR2 DIMM Slots
23. North Bridge: AMD 785G
24. CPU Socket
25. CPU_FAN Header
2. PCI Express x1 Slot
3. PCI Express x16 Slot
4. PCI Slots
5. Front Audio Connector
6. CD_IN Connector
7. SPDIF_OUT Connector
8. Speaker Connector
9. South Bridge: AMD SB750
10. Front USB Connectors
11. Clear CMOS Jumper
12. Front Panel Connector
13. SATA Connectors
Note : The above motherboard layout is for reference only, please refer to the physical motherboard for detail.
1-3 Back Panel Connectors
VGA Port
1
1
PS/2 Mouse Port
LAN Port
7
3
Line Out
Line In
Rear Speaker
Subwoofer
Side Speaker
Microphone
2
4
6
8
USB Ports
Audio Ports
5
PS/2 Keyboard Port DVI-D Port HDMI Port
1. PS/2 Mouse Port
Use the upper port (green) to connect a PS/2 mouse.
2. PS/2 Keyboard Port
Use the lower port (purple) to connect a PS/2 keyboard.
3. VGA Port
To connect with external display devices, such as monitor or LCD display.
4. DVI-D Port
The DVI-D port supports DVI-D specification. Connect a monitor that supports DVI-D connection
to this port.
5. HDMI Port
The HDMI (High-Definition Multimedia Interface) provides an all-digital audio/video interface to
transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/video to this port. The HDMI Technology can support a maximum resolution of 1920x1080p,
but the actual resolutions supported depend on the monitor being used.
6. USB Ports
The USB ports support the USB 2.0/1.1 specification. Use these ports for USB devices such as
an USB keyboard/mouse, USB printer, USB flash drive and etc.
7. RJ-45 LAN Port
The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.
LAN Type
1000M
Left: Active
Right: Link
Status
Description
Status
Off
No Link
Off
No Link
Off
10Mb/s Connection
Green
Blinking
Data Activity
Description
Green
100Mb/s Connection
Orange
1000Mb/s Connection
Active
LED
Link
LED
1
8. Audio Ports
For the definition of each audio port, please refer to the table below :
Port
2-channel
4-channel
5.1-channel
7.1-channel
Blue
Line In
Line In
Line In
Line In
Green
Line Out
Front Speaker Out
Front Speaker Out
Front Speaker Out
Pink
Microphone In
Microphone In
Microphone In
Microphone In
Orange
-
-
Center/Subwoofer Out
Center/Subwoofer Out
Black
-
Rear Speaker Out
Rear Speaker Out
Rear Speaker Out
Grey
-
-
-
Side Speaker Out
This chapter introduces the hardware installation process, including
the installation of the CPU, memory, power supply, slots, pin headers
and the mounting of jumpers. Caution should be exercised during
the installation of these modules. Please refer to the motherboard
layout prior to any installation and read the contents in this chapter
carefully.
This chapter includes the following information :
■
Install the CPU and CPU Cooler
■
Install the Memory
■
Install an Expansion Card
■
Install other Internal Connectors
■
Jumpers
Please visit the following website for more supporting information about your
motherboard.
CPU Support List:
http://www.foxconnsupport.com/cpusupportlist.aspx
Memory, VGA Compatibility List:
http://www.foxconnsupport.com/complist.aspx
CA
UT
IO
N
2-1 Install the CPU and CPU Cooler
!
2
■
■
■
■
■
■
Read the following guidelines before you begin to install the CPU :
Make sure that the motherboard supports the CPU.
Always turn off the computer and unplug the power cord from the power supply before
installing the CPU to prevent hardware damage.
Locate the Pin-1 of the CPU. The CPU cannot be inserted if oriented incorrectly.
Apply an even and thin layer of thermal grease on the surface of the CPU.
Do not turn on the computer if the CPU cooler is not installed, otherwise overheating
and damage of the CPU may occur.
Set the CPU host frequency in accordance with the CPU specifications. It is not
recommended that the system bus frequency be set beyond hardware specifications
since it does not meet the standard requirements for the peripherals. If you want to
set the frequency beyond the standard specifications, please do so according to your
hardware specifications including the CPU, graphics card, memory, hard drive, etc.
Install the CPU
Locate the Pin-1 CPU triangle mark and the Pin-1 of the CPU socket.
Pin-1 corner of the
CPU socket
Pin-1 triangle
marking of CPU
2. Align Pin-1 of the CPU with the CPU
socket, and gently put the CPU
onto the socket.
1. Release the CPU socket lever.
3. When CPU is properly seated,
push the CPU socket lever back
to its locked position.
2
Install the CPU Cooler
Follow the steps below to correctly install the CPU cooler. (The following procedures use Foxconn
cooler as the example.)
CA
UT
IO
N
!
1. Apply and spread an even thermal
grease on the surface of CPU.
2. Buckle the heatsink firmly at one
side of the stand.
3. Buckle the heatsink at another
side, and press the fasten lever
down to tightly seat the cooler.
4. Attach the 3-wire CPU cooler
connector to the CPU fan header
on the motherboard .
Use extreme care when removing the CPU cooler because the thermal grease may
adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU.
CA
UT
IO
N
2-2 Install the Memory
!
2
■
■
■
Read the following guidelines before you begin to install the memory :
Make sure that the motherboard supports the memory. It is recommended that memory
of the same capacity, brand, speed, and chips be used.
Always turn off the computer and unplug the power cord from the power outlet before
installing the memory to prevent hardware damage.
Memory modules have a foolproof design. A memory module can be installed in only
one direction. If you are unable to insert the memory, switch the direction.
Dual Channel Memory Configuration
This motherboard provides four DDR2 memory sockets and supports Dual Channel Technology.
When memory is installed, the BIOS will automatically check the memory in your system.
Four DDR2 memory sockets are divided into two channels :
Channel 0 : DIMM1, DIMM3
Channel 1 : DIMM2, DIMM4
The combinations of DIMM modules are :
DIMM1
DIMM2
DIMM3
DIMM4
Single Channel
DS/SS
Single Channel
DS/SS
-
-
-
-
DS/SS
-
Single Channel
Single Channel
-
DS/SS
-
-
-
DS/SS
-
DS/SS
Dual Channel
DS/SS
DS/SS
-
-
Dual Channel
-
-
DS/SS
DS/SS
Dual Channel
DS/SS
DS/SS
DS/SS
DS/SS
CA
UT
IO
N
(DS : Dual Side, SS : Single Side, - : No Memory)
!
It is recommended that memory of the same capacity, brand, speed, and chips be used and please select dual channel first to achieve optimum performance.
10
CA
UT
IO
N
Installing a Memory
!
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module. Be sure
to install DDR2 DIMMs on this motherboard.
112-Pin
2
128-Pin
Notch
If you take a look at front side of memory module, it has asymmetric pin counts on both sides separated
by a notch in the middle, so it can only fit in one direction. Follow the steps below to correctly install
your memory modules into the sockets.
Step 1:
Spread the clips at both ends of the memory socket.
Place the memory module onto the socket, then put
your fingers on top edge of the module, and push
it down firmly and seat it vertically into the memory
socket.
Step 2:
The clips at both ends of the socket will snap into place
when the memory module is securely inserted.
11
2
CA
UT
IO
N
2-3 Install an Expansion Card
!
■ Make sure the motherboard supports the expansion card. Carefully read the manual
that came with your expansion card.
■
Always turn off the computer and unplug the power cord from the power outlet before
installing an expansion card to prevent hardware damage.
PCI Express x1
PCI Express x16
PCI
Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis
back panel.
2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.
4. Secure the card's metal bracket to the chassis back panel with a screw.
5. After installing all expansion cards, replace the chassis cover.
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for
your expansion card(s).
7. Install the driver provided with the expansion card in your operating system.
Installing and Removing a PCI Express x16 Graphics Card :
• Installing a Graphics Card:
Gently insert the graphics card into the PCI Express x16 slot.
Make sure the graphics card is locked by the latch at the end of
the PCI Express x16 slot.
• Removing the Card:
Push the latch at the end of the PCI Express x16 slot to release
the card and then pull the card straight up from the slot.
12
2-4 Install other Internal Connectors
Power Connectors
This motherboard uses an ATX power supply. In order not to damage any device, make sure all the
devices have been installed properly before applying the power supply.
2
24-pin ATX power connector : PWR1
PWR1 is the ATX power supply connector. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the power supply cable into the
connector and make sure it is secure.
13
24
CA
UT
IO
N
12
!
PWR1
Pin #
Definition
Pin #
1
3.3V
13
Definition
3.3V
2
3.3V
14
-12V
3
GND
15
GND
4
+5V
16
PS_ON(Soft On/Off)
5
GND
17
GND
6
+5V
18
GND
7
GND
19
GND
8
Power Good
20
NC
9
+5V SB(Stand by +5V)
21
+5V
10
+12V
22
+5V
11
+12V
23
+5V
12
3.3V
24
GND
1
Pin No. 24
We recommend you using a 24-pin power supply.
If you are using a 20-pin power supply, you need
to align the ATX power connector according to
the picture.
20-Pin Power
8-pin ATX 12 V Power Connector : PWR2
The 8-pin ATX 12V power supply connects to PWR2 and provides power to the CPU.
3
1
+12V
GND
4
2
PWR2
13
Pin #
Definition
1
GND
2
GND
3
+12V
4
+12V
Front Panel Connector : FP1
2
This motherboard includes one connector for connecting
the front panel switch and LED Indicators.
HDD-LED
1
+
2
-
RESET-SW
PWR-SW
NC
Hard Disk LED Connector (HDD-LED)
Connect to the chassis front panel IDE indicator LED.
It indicates the active status of the hard disks. This
2-pin connector is directional with +/- sign.
+
PWR-LED
-
EMPTY
9 10
FP1
Reset Switch (RESET-SW)
Attach the connector to the Reset switch on the front
panel of the case; the system will restart when the
switch is pressed.
Power LED Connector (PWR-LED)
Connect to the power LED indicator on the front panel
of the chassis. The Power LED indicates the system’s
status. When the system is in operation (S0 status),
the LED is on. When the system gets into sleep mode
(S1) , the LED is blinking; When the system is in S3/S4
sleep state or power off mode (S5), the LED is off. This
2-pin connector is directional with +/- sign.
Power Switch Connector (PWR-SW)
Connect to the power button on the front panel of
the chassis. Push this switch allows the system to
be turned on and off rather than using the power
supply button.
Chassis Intrusion Alarm Header : INTR
1
The connector can be connected to a security switch on
the chassis. The system can detect the chassis intrusion
through the function of this connector. If eventually the
chassis was closed, the system will send a message
out.
SPKJ
EMPTY
NC
SPKJ
1
2
3
4
SPEAKER
14
GND
INTR
Speaker Connector : SPEAKER
The speaker connector is used to connect speaker of
the chassis.
2
INTRUDERJ
COM Connector : COM1
1
RLSD
2
SIN
SOUT
DTR
GND
DSR
RTS
CTS
RI
EMPTY
9 10
2
This motherboard supports one serial RS232 COM port for
legacy compatibility. User must purchase another RS232
cable with a 9-pin D-sub connector at one end to connect
with the external RS232 device and another end with 10pin female connector to connect with COM1 connector in
the motherboard.
COM1
IrDA Connector : IR
This connector supports infrared wireless transmitting and
receiving device.
1
+5V
2
EMPTY
3
IRRX
GND
IRTX
4
5
IR
USB Connectors : F_USB1/2
In addition to the six USB ports on the rear panel, this
product also provides three 10-pin USB headers on its
motherboard. By connecting through USB cables with
them, user can quickly expand another four USB ports on
the front panel.
1
2
5V_DUAL
DD+
GND
EMPTY
5V_DUAL
DD+
GND
NC
9 10
F_USB 1/2
Serial ATA Connectors : SATA_1/2/3/4/5/E_
SATA1
1
The Serial ATA connector is used to connect with SATA
Hard Disk or CD devices which supporting this feature.
The current Serial ATA II interface allows up to 300MB/s
data transfer rate.
Note: There will be an E_SATA1 cable in the package, you
can use it to connect an E_SATA1 hard disk to the E_SATA1
on the motherboard(as depicted).
15
GND
TX+
TXGND
RXRX+
GND
SATA _1/2/3/4_SATA1
SATA_1/2/3/4/5/E
Audio Connector : F_AUDIO
The audio connector supports HD Audio standard.
It provides the Front Audio output choice.
PORT1_L
PORT1_R
PORT2_R
SENSE_SEND
PORT2_L
1 2
9 10
AUD_GND
PRESENCE_J
SENSE1_RETURN
EMPTY
SENSE2_RETURN
2
F_AUDIO
CD_L GND CD_R
Audio Connector : CD_IN
CD_IN is a Sony standard audio connector, it can be
connected to a CD/DVD-ROM drive through a CD/DVD
audio cable.
Fan Headers : CPU_FAN, SYS_FAN1, SYS_
FAN2
There are five main fan headers on this motherboard.
The fan speed can be controlled and monitored in “PC
Health Status” section of the BIOS Setup. These fans
can be automatically turned off after the system enters
S3, S4 and S5 sleeping states.
1
GND
1
POWER
SENSE
CONTROL
CPU_FAN
GND
1
POWER
SENSE
CONTROL
SYS_FAN1
GND
POWER
SENSE
CONTROL
SYS_FAN2
16
CD_IN
2-6 Jumpers
For some features needed, users can change the jumper settings on this motherboard to modify them.
This section explains how to use the various functions of this motherboard by changing the jumper
settings. Users should read the following content carefully prior to modifying any jumper setting.
1. For any jumper on this motherboard, pin 1 can be identified by the bold silkscreen next to it.
However, in this manual, pin 1 is simply labeled as “1”.
2. The following table explains different types of the jumper settings. "Closed" means placing a jumper
cap on the two pins to temporarily short them. The shorting can also be done by touching two
pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can prevent
hazardous ESD (Electrical Static Discharge) problem.
Jumper
Diagram
Definition
Description
1
1-2
Set Pin 1 and Pin 2 closed
1
2-3
Set Pin 2 and Pin 3 closed
1
Closed
Set two pins closed
1
Opened
Set two pins opened
1
1
Clear CMOS Jumper: CLR_CMOS
The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data,
date, time information, hardware password...etc.). Clear CMOS data is the fast way to go back to
factory default when the BIOS settings were mistakenly modified.
The steps to clear CMOS data are :
1. Turn off the computer, unplug the power cord from the power outlet.
2. Remove jumper cap from pins 2-3, put it onto pins 1-2 to short them. This will clear CMOS
data.
3. Return the setting to its original with pins 2-3 closed.
4. Plug in the power cord to your computer and turn it on.
5. Go to BIOS Setup to configure new system as described in next chapter.
Clear
1
2
3
Normal
(Default)
CLR_CMOS
17
1
2
3
2
Description of Jumpers
This chapter tells how to change system settings through the BIOS
Setup menus. Detailed descriptions of the BIOS parameters are
also provided.
You have to run the Setup Program when the following cases occur:
1. An error message appears on the screen during the system
Power On Self Test (POST) process.
2. You want to change the default CMOS settings.
This chapter includes the following information :
■
Enter BIOS Setup
■
Main Menu
■
System Information
■
Advanced BIOS Features
■
■
■
■
■
■
■
■
■
Fox Central Control Unit
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PC Health Status
BIOS Security Features
Load Optimal Defaults
Save Changes and Exit
Discard Changes and Exit
Since BIOS could be updated some other times, the BIOS information described
in this manual is for reference only. We do not guarantee the content of this
manual will remain consistent with the newly released BIOS at any given time in
the future. Please visit our website for updated manual if it is available.
Enter BIOS Setup
CA
UT
IO
N
The BIOS is the communication bridge between hardware and software, correctly setting up the
BIOS parameters is critical to maintain optimal system performance. Power on the computer,
when the message "Press <DEL> to enter Setup, <ESC> to boot menu". appears at the bottom
of the screen, you can press <DEL> key to enter SETUP.
!
Main Menu
The main menu allows you to select from a list of setup functions together with two exit choices.
Use the arrow keys to select a specific item and press <Enter> to go to the sub-menu.
Each item in the main menu is explained below:
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
s
Information
► System Information
► PC Health Status
► Advanced BIOS Features
► BIOS Security Features
► Fox Central Control Unit Load Optimal Defaults
► Advanced Chipset Features Save Changes and Exit
► Integrated Peripherals Discard Changes and Exit
► Power Management Setup
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
Configure Time and Date. Display System Information... v02.61 (c) Copyright 1985-2008, American Megatrends, Inc.
► System Information
It displays the basic system configuration, such as BIOS ID, CPU Name, memory size, system
date, time and Floppy drive. They all can be viewed or set up through this menu.
► Advanced BIOS Features
The advanced system features can be set up through this menu. There are boot up settings.
► Fox Central Control Unit
Some special proprietary features (such as overclocking) can be set up through this menu.
► Advanced Chipset Features
The values for the chipset can be changed through this menu, and the system performance
can be optimized.
► Integrated Peripherals
All onboard peripherals can be set up through this menu. There are IDE devices, Super I/O
devices such as Serial I/O and other USB devices... etc.
19
3
We do not suggest that you change the default values in the BIOS Setup, and we
shall not be responsible for any damage which resulted from the change you made.
3
► Power Management Setup
All the items related with Green function features can be set up through this menu.
► PC Health Status
This setup enables you to read/change Fan speeds, and displays temperatures and voltages
of your CPU/System.
► BIOS Security Features
The Supervisor/User password can be set up through this menu to prevent unauthorized use
of your computer. If you set a password, the system will ask you to key in correct password
before boot or access to Setup.
► Load Optimal Defaults
The optimal performance settings can be loaded through this menu. However, it may offer better performance in some ways (such as less I/O cards, less memory ...etc.), still, it may cause
problem if you have more memory or I/O cards installed. It means, if your system loading is
heavy, set to optimal default may sometimes come out an unstable system. What you need
now is to adjust BIOS setting one by one, trial and error, to find out the best setting for your
current system.
► Save Changes and Exit
Save setting values to CMOS and exit.
► Discard Changes and Exit
Do not change anything and exit the setup.
20
System Information
This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
System Information
Date (mm:dd:yy)
Time (hh:mm:ss)
► IDE Master
► IDE Slave
► SATA1#
► SATA2#
► SATA3#
► SATA4#
► SATA5#
► E-SATA #
07
[Mon , 07/06/2009]
Help Item
[11 : 59 : 49]
[Not Detected]
Use [Enter], [TAB]
or [SHIFT-TAB] to
[Not Detected]
select a field.
[Not Detected]
[Not Detected]
[Not Detected]
Use [+] or [-] to
[Not Detected]
change system Date.
[Not Detected]
[Not Detected]
Floppy A
Halt On
Keyboard
Mouse
Floppy
[1.44 MB 31/2]
[All Errors, But ...]
[Disabled]
[Disabled]
[Disabled]
Model Name
BIOS ID
: A85GM
:933F1D06
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► Date (mm:dd:yy)
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► Time (hh:mm:ss)
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► Primary IDE Master/Slave, SATA1#/SATA2#/SATA3#/SATA4#/SATA5#/E-SATA#
While entering setup, BIOS automatically detects the presence of IDE devices, and you can
enable or disable the related mode and technology for the relevant device. This item
displays the drive information of IDE devices.
► Floppy A
This option allows you to select which kind of the Floppy Disk Drive is installed in your system.
It can be [Disabled], [360KB, 51/4"], [1.2MB, 51/4"], [720KB, 31/2"], [1.44MB, 31/2"] and [2.88
MB, 31/2"].
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse or floppy can result in system halt. The
21
3
3
halt condition can be enabled/disabled in the next three settings.
► Keyboard
The system boot will not stop for a keyboard error if you enabled this item.
► Mouse
The system boot will not stop for a mouse error if you enabled this item.
► Floppy
The system boot will not stop for a floppy error if you enabled this item.
► Model Name
Model name of this product.
► BIOS ID
It displays the current BIOS ID. User can check this information and discuss with the field
service people if a BIOS upgrade is needed.
22
Advanced BIOS Features
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Advanced BIOS Features
IDE Detect Time Out MPS Revision
PCI Latency Timer
Quiet Boot
Quick Boot
Bootup Num-Lock Floppy Drive Seek
► Boot Device Priority
► Removable Drives
[5]
[5]
Help Item
[1.1]
[64]
Select the time out [Enabled]
value for detecting
[Enabled]
ATA/ATAPI device(s)
[On]
in second .
[Disabled]
[Press Enter]
[Press Enter]
3
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► IDE Detect Timer Out
This item is used to select the time out value for detecting ATA/ATAPI devices. If the checking
time is over the set value, the system will skip it.
► MPS Revision
This feature is only applicable to multiprocessor motherboards as it specifies the version of the
MPS that the motherboard will use. The MPS is a specification by which PC manufacturers
design and build CPU architecture systems with two or more processors. MPS 1.1 was the
original specification. MPS version 1.4 adds extended configuration tables for improved
support of multiple PCI bus configurations and greater expandability in the future. In addition,
MPS 1.4 introduces support for a secondary PCI bus without requiring a PCI bridge. If your
operating system comes with support for MPS 1.4, you should keep the setting as the default
1.4. You also need to enable MPS 1.4 support if you need to make use of the secondary PCI
bus on a motherboard that doesn't come with a PCI bridge. You should only leave it as 1.1
only if you are running an older operating system that only supports MPS 1.1.
► PCI Latency Timer
This item is used to set the PCI latency timer. The value is in unit of PCI cycle for PCI device
latency timer register. Setting values are 32, 64, 96, 128, 160, 192, 224, 248.
This feature controls how long each PCI device can hold the bus before another takes over.
The larger the value, the longer the PCI device can retain control of the bus. Low values for
the PCI Latency Timer will reduce the effective PCI bandwidth while higher values means
every PCI device will have to wait longer before they can get access to the bus, but when they
do get access, they can conduct their transactions for a longer time. Normally, a default value
of 64 cycles is set. Some PCI devices may not agree with longer latency times so if you start
facing problems like stuttering sound or a less responsive system, reduce the latency. Higher
values will actually reduce performance as too much time may be allocated to each PCI device
to the disadvantage of other devices on the bus.
► Quiet Boot
This item is used to enable/disable the quiet boot.
23
3
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
► Quick Boot
While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the
time needed to boot the system.
► Bootup Num-Lock
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
► Floppy Drive Seek
This item controls whether the BIOS will be checking for a floppy disk while booting up. If it
cannot detect one (either due to improper configuration or physical unavailability), it will appear
an error message. Disabling this function, then POST will not detect the floppy.
► Boot Device Priority
This option is used to select the priority for boot devices. After pressing <Enter>, you can
select the device using the Up/Down arrow keys, and change the device priority using <+> or
<->; you can exit this menu by pressing <Esc>.
► Removable Drives
This option is used to specify the boot priority sequence from available removable drives.
24
Fox Central Control Unit
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Fox Central Control Unit
Super BIOS Protect
Auto Detect PCI Clock
► Smart BIOS
► Fox Intelligent Stepping
► Voltage Options
► CPU Configuration
[Disabled]
Help Item
[Disabled]
[Disabled]
Options
[Press Enter]
[Press Enter]
[Press Enter]
Disabled
Enabled
[Press Enter]
3
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► Super BIOS Protect
To protect the system BIOS from virus attack, there is a BIOS write-protection mechanism
provided. Super BIOS Protect function protects your BIOS from being affected by viruses, e.g.
CIH.
► Auto Detect PCI Clock
This option is used to auto detect PCI slot. When enabled, the system will turn off clock of the
empty PCI slot to reduce EMI (Electromagnetic Interference).
► Smart BIOS/Fox Intelligent Stepping/ Voltage Options/ CPU Configuration
Press <Enter> to go to its submenu.
Smart BIOS
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Smart BIOS
Smart Power LED
Smart Boot Menu
Current CPU Speed Current FSB Multiplier
Current DRAM Speed
[Enabled]
Help Item
[Enabled]
[Enabled]
Options
: 2700MHz
NB CIK: N/A
: 13.5x
Disabled
: 333 MHz, N/A
Enabled
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
25
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On System Test (POST). The LED is located at the front panel, and it displays POST
state by different long-short blinking intervals. You can always leave this state enabled.
3
System Status
Power LED Status
Stop Blinking Condition
Normal
Always On
Always On
No Memory
Continue blinking On (1sec.), Off (1sec.)
Reboot & Memory OK
No VGA Card detec
Continue blinking On (2sec.), Off (2sec.)
Reboot & Display OK
Post Error Message
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Enter Setup or Skip
No CPU Fan
Continue blinking On (1/2sec.), Off (1/2sec.)
Reboot & Fan OK
► Smart Boot Menu
When PC starts, it will ask you to press [Del] key to enter setup or press [Esc] key to enter
smart boot menu. If [Disabled] is selected, then pressing [Esc] has no function.
► Current CPU Speed
This item displays the current CPU speed.
► Current FSB Multiplier
This item displays the current FSB Ratio.
► Current DRAM Speed
This item displays the current DRAM speed, in dual channels.
Fox Intelligent Stepping
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Fox Intelligent Stepping
CPU Clock Memory Speed Mode GFX Engine Clock Override PCI Express Clock
CPU Multiplier Adjust Spread Spectrum
CPU-NB HT Link Speed
NCHT Incoming Link Width
NCHT Outgoing Link Width
[200]
200
[Auto]
[Disabled]
[100]
[Auto]
[Enabled]
Help Item
[Auto]
[Auto]
[Auto]
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► CPU Clock
This option is used to adjust the CPU clock.
► Memory Speed Mode
This item is used to enable/disable provision of DRAM timing by SPD device. The SerialPresence Detect (SPD) device is a small EEPROM chip, mounted on a DDR2 memorymodule. It
26
cache.
The HyperTransport link width and frequency are initialized between the adjacent coherent
and/or noncoherent HyperTransport technology devices during the reset sequence.
It is highly recommended to set to [Auto] for overall performance.
27
3
contains important information about the module’s speed, size, addressing mode and various
other parameters, so that the motherboard memory controller (chipset) can better access the
memory device. Select [Auto] for SPD enable mode.Select [Limit], the DRAM speed will not
exceed the specified value listed in the “Memory Speed Adjust” item. If SPD value is faster
than “Memory Speed Adjust” value, it will run at the specified “Memory Speed Adjust” speed.
Otherwise, SPD value is selected.Select [Manual], then DRAM speed is manually selected
according to the set value of “Memory Speed Adjust”.
► GFX Engine Clock Override
This item allows you to enable/disable GFX Engine Clock Override support.
► PCI Express Clock
This option is used to adjust the speed of PCI Express slot. It can't enhance the graphics card
speed.
► CPU Multiplier Adjust
This option is used to adjust the CPU Clock Ratio. Multiply CPU clock with this ratio, you can
get the CPU speed. Increase this ratio may overclock your CPU.
► Spread Spectrum
If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference)
generated by the system, so to comply with FCC regulation. But if overclocking is activated,
you had better disable it.
► CPU-NB HT Link Speed
HT stands for HyperTransport bus. The CPU<->NB HT Speed option controls the physical
speed of the CPU to Northbridge HT link using multipliers ranging 1x to 13x. The physical
speed of the link is determined by multiplying the CPU FSB with the CPU<->NB HT Speed
setting.
► CPU-NB HT Incoming Link Width / CPU-NB HT Outcoming Link Width
The coherency refers to the caching of memory, and the HT links between processors are coherent HT links as the HT protocol includes messages for managing the cache protocol. Other
(non processor-processor) HT links are Non-Coherent HT links, as they do not have memory
Voltage Options
3
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Voltage Options
CPU Voltage Control [Disabled]
Help Item
[Disabled]
Memory Voltage Control
[Disabled]
Options
NB Voltage Control [Disabled]
HT/SB Voltage Control [Disabled]
Disabled
+25mV
+50mV
+75mV
+100mV
+125mV
+150mV
+175mV
+200mV
+225mV
+250mV
+275mV
+300mV
+325mV
+350mV
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► CPU Voltage Control
This option is used to change the CPU voltage.
► Memory Voltage Control
This option is used to change the memory voltage.
► NB Voltage Control
This option is used to change the NB voltage in a step of 30mV. The voltage can be incremented from +30mV to +360mV.
► HT/SB Voltage Control
This option is used to change the HT/SB voltage in a step of 30mV. The voltage can be incremented from +30mV to +360mV.
CPU Configuration
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
CPU Configuration
CPU Configuration Help Item
AGESA Version : 3.3.2.4
Physical Count : 1
Enable/disable the
Logical Count : 2 generation of ACPI
_PPC, _PSS, and _PCT
objects .
AMD Athlon (tm) 64 x 2 Dual Core Processor 5200+
Cache L1 : 256KB
Cache L2 : 1024KB Cache L3 : N/A
Current CPU Speed : 2700MHz, NB CIK: N/A
Current FSB Multiplier : 13.5x
Maximum FSB Multiplier: 13.5x
[Enabled]
Cool ‘N’ Quiet
C1E Support
[Enabled]
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
28
This menu shows most of the CPU specifications.
► Cool ’N’ Quiet
This option helps lowering down the CPU frequency and voltage when system is idling. When
the CPU speed is slowing down, the temperature will drop as well.
► C1E Support
C1E represents Enhanced HALT State. It is a feature which CPU uses to reduce power
consumption when in halt state. C1E drops the CPU’s multiplier and voltage to lower levels
when a HLT (halt) command is issued. This item is used to enable/disable the C1E support.
3
29
Advanced Chipset Features
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Advanced Chipset Features
3
Northbridge Chipset Configuration
Help Item
► Memory Configuration [Press Enter]
► DRAM Timing Configuration [Press Enter] CAS Latency
:5.0 RAS/CAS Delay :5 CLK
Row Precharge Time
:5 CLK
Min Active RAS :15 CLK RAS/RAS Delay :3 CLK
Row Cycle
:20 CLK
Internal Graphics Configuration
Internal Graphics Mode
[UMA]
UMA Frame Buffer Size
[Auto]
Primary Video Controller
[PCI-GFXO-IGFX]
Surround View
[Auto]
AMD 880 HD Audio [Enabled]
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► Memory Configuration/DRAM Timing Configuration
Press <Enter> to go to its submenu.
The following six items display the DRAM timing values.
► CAS Latency
This item shows the CAS latency. The CAS Latency is the number of clock cycles that elapse
from the time the request for data is sent to the actual memory location until the data is
transmitted from the module.
► RAS / CAS Delay
This item displays a delay time (in clock cycles) between the CAS and RAS strobe
signals.
► Row Precharge Time
This item shows the number of clock cycles taken between issuing of the precharge command
and the active command. The DRAM row precharge time is in unit of clock cycle.
► Min Active RAS
Displays the number of clock cycles taken between a bank active command and
issuing of the precharge command.
► RAS / RAS Delay
This item shows a delay time (in clock cycles) between the RAS and RAS strobe
signals.
► Row Cycle
This item displays the minimum timing interval between successive active commands to the
same bank. The row cycle time is in unit of clock cycle.
► Internal Graphics Mode
Enable/Disable the integrated UMA graphics controller.
► UMA Frame Buffer Size
Allocates system memory for use as video memory to ensure the most efficient use of
available resources for maximum 2D/3D graphics performance.
This is a memory allocation method addition to the Unified Memory Architecture (UMA)
30
concept, wherein a static amount of page-locked graphics memory is allocated during driver
initialization. This fixed amount of memory will provide the user with a guaranteed graphics
memory at all times, and will no longer be available to the OS.
► Primary Video Controller
This item is used to select which graphics controller is used as the primary boot device.
► Surround View
Surround View is the ATI technology that provides multi-graphics controller display capability
Memory Configuration
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Memory Configuration
Memory Configuration
[Always]
DCT Unganged Mode
Help Item
This allows selection
of unganged DRAM
mode (64-bit width).
Auto = Ganged mode
Always = Unganged mode
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► DCT Unganged Mode
DCT stands for DRAM Controller.
Ganged refers to the use of both DRAM controllers within a memory controller acting in concert to access memory. For a description of ganged (128-bit DRAM data width) and unganged
(64-bit DRAM data width) DRAM modes :
Ganged channels (DDR2) :
31
3
for both the ATI PCIe-based graphics card and the ATI integrated graphics processor (IGP).
Enabling SurroundView does not impact display modes (resolution and color depth) or performance. The display mode of each output is controlled independently by the graphics controller
connected to it.
1. When using a non-ATI PCI Express (PCIe) graphics card, Surround View is not supported.
The integrated graphics processor (IGP) is automatically disabled, and the system memory
allocated to the IGP is freed for other use.
2. PCIe graphics card is the default first display device. Enabling SurroundView in the BIOS
enables the integrated UMA graphics controller, which in turn makes available up to two
additional graphics outputs. When enabling the integrated UMA graphics controller, system
memory will be reallocated.
► AMD 880 HD Audio
This item is used to set whether the HD Audio controller is enabled through the HDMI port on
the rear panel.
3
■ DCT channels A and B can be ganged as a single logical 128-bit DIMM.
■ Offers highest DDR2 bandwidth.
■ Requires both DIMMs in a logical pair to have identical size and timing parameters, both
DCTs programmed identically.
Unganged channels
■ DCT channels A and B operate as two completely independent 64-bit channels (both channels operate at the same frequency).
■ Reduce DRAM page conflicts – more concurrent open dram pages .
■ Better bus efficiency.
Burst lengths supported
When both DCTs are enabled in unganged mode, BIOS must initialize the frequency of each
DCT in order.
DRAM Timing Configuration
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
DRAM Timing Configuration
DRAM Timing Configuration Help Item
Options
[Auto]
DRAM Timing Mode
Auto
DCT 0
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► DRAM Timing Mode
When both DCTs (DRAM controller) are enabled in unganged mode, BIOS must initialize the
frequency of each DCT in order, you also can configure the timings manually.
Settings are: [Auto], [DCT 0]. (appear in AM2 CPU)
Settings are: [Auto], [DCT 0], [DCT 1], [Both]. (appear in AM2+/AM3 CPU)
► CAS Latency
The number of memory clocks it takes a DRAM to return data after the read CAS_L is asserted
depends on the memory clock frequency. The value that BIOS programs into the memory
controller is a function of the target clock frequency. The target clock frequency is determined
from the supported CAS latencies at given clock frequencies of each DIMM.
► TRCD (RAS-to-CAS Delay)
This item allows you to select a delay time (in clock cycles) between the CAS# and RAS#
strobe signals.
► TRP (Precharge Command Period)
32
Trfc0: auto-refresh row cycle time for logical DIMM 0
33
3
This item allows you to select the row precharge time (in clock cycles).
► tRTP (Internal Read to Precharge Command Delay)
Internal READ Command to PRECHARGE Command delay.
► TRAS (Active-to-Precharge Delay)
This item allows you to set the minimum RAS# active time (in clock cycles).
► TRC (Active-to-Active/Auto-Refresh Command Period)
This item allows you to set the row cycle time (in clock cycles). tRC = tRAS + tRP.
► tWR (Write Recovery)
This item allows you to select the write recovery time (in clock cycles).
► TRRD (Active-to-Active of a Different Bank)
This item allows you to select a delay time (in clock cycles) between the RAS# and RAS#
strobe signals.
► tRWTTO (Read-to-Write Turnaround for Data)
This timing parameter ensures read-to-write data-bus turnaround.
► TwrrD (Write to Read DIMM Termination Turn-around)
This timing parameter accounts for termination timing when a write is followed by a
read to a different DIMM.
► tWTR (Internal Write to Read Command Delay)
This item allows you to select a delay time (in clock cycles) between sending the last data from
a write operation to the memory and issuing a read command.
► Twrwr (Write to Write Timing)
This timing parameter accounts for turn-around timing when a write is followed by a write to a
different DIMM.
► Trdrd (Read to Read Timing)
This timing parameter accounts for turn-around and termination timing when a read is followed
by a read to a different chip select.
► tRFC0, 1, (Auto-Refresh-to-Active/Auto-Refresh Command Period)
Refresh to Refresh or Refresh to Active command interval.
Trfc1: auto-refresh row cycle time for logical DIMM 1
Integrated Peripherals
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Integrated Peripherals
Enter]
Help Item
[Press Enter]
[Press Enter]
[Press Enter]
Configure the IDE
[Press Enter]
device(s).
[Enabled]
[Disabled]
[Enabled]
3
► IDE Configuration
► USB Configuration
► SuperIO Configuration
► Trusted Computing
OnBoard LAN
OnBoard LAN Boot ROM
HD Audio Controller
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► IDE Configuration / USB Configuration / SuperIO Configuration / Trusted Computing
Press <Enter> to go to relative submenu.
► OnBoard LAN
This item is used to enable or disable the onboard LAN controller.
► OnBoard LAN Boot ROM
This item is used to enable or disable the onboard LAN boot optional ROM. A LAN boot ROM
lets you set up a diskless workstation on the network. By installing a boot ROM in the network
board, you can enable a client PC system on the network to be booted remotely.
► HD Audio Controller
This item is used to enable or disable the HD Audio controller.
IDE Configuration
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
IDE Configuration
IDE Configuration
Help Item
[Enabled]
[Enabled] Disabled: Disable the
OnBoard PCI IDE Controller
OnChip SATA Channel [Enabled] Iintegrated IDE
OnChip SATA Type [Native IDE] controller.
SATA IDE Combined [Enabled] Enabled: Enable both
IDE controllers.
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► OnBoard PCI IDE Controller
34
USB Configuration
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
USB Configuration
USB Configuration
Module Version - 2.24.3 -13.4
Help Item
Enable support for
legacy USB.
Auto option disables
legacy support if
no USB devices are
connected.
USB Devices Enabled :
None
[Enabled]
Legacy USB Support
USB 2.0 Controller Mode
[High Speed]
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB 2.0 Controller Mode
35
3
[Disabled]: Disable the integrated IDE controller.
[Enabled]: Enable both IDE controllers.
► OnChip SATA Channel
[Disabled] : Disable SATA ports 1, 2, 3, 4, 5, ESATA.
[Enabled] : Enable SATA ports 1, 2, 3, 4, 5, ESATA.
► OnChip SATA Type
This item is used to set the operating mode of your SATA ports.
Options : [Native IDE]; [RAID]; [AHCI]; [Legacy IDE].
[Native IDE] - This configures the SATA ports to support native IDE mode.
[RAID] - When you enable RAID, it means all your SATA drives must also support AHCI.
[AHCI] - The Advanced Host Controller Interface (AHCI) specification describes the register
level interface for a Host Controller for Serial ATA. The specification includes a description of
the hardware/software interface between system software and the host controller hardware.
AHCI provides more advanced features including SATA features, but some SATA drives may
not support AHCI, unless they are labeled with AHCI support in its specification.
If your motherboard supporting AHCI, and you have a SATA device, which also supports AHCI,
then you can select IDE option to have fair performance (only PATA, SATA level), or you can
select AHCI to get its best performance.
[Legacy IDE] - This configures the SATA ports to support legacy IDE mode which is running
for old Windows system.
► SATA IDE Combined Mode
This item is used to enable or disable the SATA IDE combined mode.
This item is used to set the transmission rate mode of USB 2.0. This function only works under
DOS mode. The available settings are: [High Speed] in 480Mbps; [Full Speed] in 12Mbps.
SuperIO Configuration
3
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
SuperIO Configuration
SuperIO Configuration Help Item
Allows BIOS to enable
OnBoard Floppy Controller [Enabled]
[Enabled]
Serial Port1 Address [3F8/IRQ4] or disable floppy
[2F8/IRQ3] controller.
Serial Port2 Address
Serial Port2 Mode
[IrDA]
Serial Port2 Duplex Mode [Half Duplex]
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► OnBoard Floppy Controller
This item is used to enable/disable Floppy Controller.
► Serial Port1 Address
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 1.
► IR IO Address
This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial
port 2.
► IR Mode
This item is used to set the Serial Port2 mode. The available settings are :
[IrDA] : An IrDA device for maximum 115200 bit/s.
[ASK IR] : A faster IrDA for 1152000 bit/s.
► IR Duplex Mode
This item enables you to determine the infrared function of the onboard infrared chip.
36
Trusted Computing
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Trusted Computing
Trusted Computing
Help Item
[No]
TCG/TPM SUPPORT
[No]
Enable/Disable TPM
TCG (TPM 1.1/1.2)
support in BIOS
↑↓←→:Move Enter:Select
3
+/-/:Value F10:Save
F9:Optimized Defaults
ESC:Exit
F1:General Help
► TCG/TPM SUPPORT
Trusted Computing Group (TCG) members develop and promote open, vendor-neutral,
industry standard specifications for trusted computing building blocks and software interfaces
across multiple platforms
TPM (Trusted Platform Module) is a specification promoted by TCG. A Trusted Platform Module offers facilities for secure generation of cryptographic keys.
The TPM Work Group is chartered to create the Trusted Platform Module (TPM) specification. The definition of the TPM architecture comes from the TC and the TPM Work Group
defines the implementation of that architecture. Work group members should have a working
knowledge of security in relation to the design and usage of cryptographic modules. Members
should also have a working knowledge of cryptographic techniques including public-key cryptography, cryptographic algorithms and protocols.
This item is used to enable/disable the function of TCG/TPM support.
37
Power Management Setup
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Power Management Setup
3
ACPI Suspend Type
PWRON After PWR- Fail
HPET Support
Resume by LAN
Resume by PCI Card
Resume by PCIE Card
Resume by USB Devices
Resume by PS2 Keyboard
Resume by PS2 Mouse
Resume by RTC
[S3 (STR)]
Help Item
(STR)]
[Power Off]
[Enabled]
Select the ACPI
[Disabled]
State used for
[Disabled]
System Suspend.
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
ACPI (Advanced Configuration and Power Interface) is an open industry standard interfaces
enabling OS-directed configuration, power management, and thermal management of mobile,
desktop, and server platforms. It defines five sleeping states, they are :
S1 - The S1 sleeping state is a low wake latency sleeping state. In this state, no system
context is lost (CPU or chip set) and hardware maintains all system context. (also called
Power On Suspend)
S3 - The S3 sleeping state is a low wake latency sleeping state where all system context
is lost except system memory. CPU, cache, and chip set context are lost in this state.
Hardware maintains memory context and restores some CPU and L2 configuration
context. Control starts from the processor’s reset vector after the wake event. (also called
Suspend to RAM)
S4 - The S4 sleeping state is the lowest power, longest wake latency sleeping state supported
by ACPI. In order to reduce power to a minimum, it is assumed that the hardware
platform has powered off all devices. Platform context is maintained. (also called
Suspend to Disk)
S5 - The S5 state is similar to the S4 state except that the OS does not save any context. The
system is in the soft off state and requires a complete boot when it wakes. Software uses
a different state value to distinguish between the S5 state and the S4 state to allow for
initial boot operations within the BIOS to distinguish whether or not the boot is going to
wake from a saved memory image.
► ACPI Suspend Type
This item is used to set the energy saving mode of the ACPI function. When you select “S1
(POS)” mode, the power is always on and computer can be resumed at any time. When
you select “S3 (STR)” mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly return
to previous state when the STR function wakes.
► Power On After Power Fail
38
39
3
This item is used to set which state the PC will take with when it resumes after an AC power
loss.
► HPET Support
HPET stands for High Precision Even Timer. If you have the HPET disabled, then windows
does not have access to it and therefore falls back to less accurate timing methods. This item
is used to enable or disable the HPET Suppport.
► Resume by LAN
This item is used to enable/disable the OnBoard LAN to generate a wake up.
► Resume by PCI Card
This item is used to enable/disable the PCI card to generate a wake up.
► Resume by PCIE Card
This item is used to enable/disable the PCIE card to generate a wake up.
► Resume by USB Devices
This item is used to enable/disable the USB keyboard and mouse to generate a wake up.
► Resume by PS2 Keyboard
This item is used to enable/disable the PS2 keyboard to generate a wake up.
► Resume by PS2 Mouse
This item is used to enable/disable the PS2 mouse to generate a wake up.
► Resume by RTC
This item is used to enable/disable RTC alarm event to generate a wake up.
RTC is system real time clock.
► RTC Alarm Date(Days)
When Resume by RTC is enabled, select a specific date to generate a wake up.
► RTC Alarm Time (HH : MM : SS)
When Resume by RTC is enabled, select a specific time to generate a wake up.
PC Health Status
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
PC Health Status
Warning Temperature
Shut Down Temperature
Case Open Warning
CPU Temperature
System Temperature
CPU Fan Speed
System Fan1 Speed
System Fan2 Speed
CPU Core
DRAM Voltage
+3.3V
+12.0V
+1.1V
CPU Smart Fan Function
Off PWM Temperature
Start PWM Temperature
Start PWM Value
Slope PWM Value
System Smart Fan1 Function
3
[Disabled]
Help Item
[Disabled]
[Disabled]
Options
[Disabled]
:49 oC/120 oF
o
o
Disabled
:41 C/105 F
:2242 RPM
50 oC/122 oF
:N/A
55 oC/131 oF
:N/A
60 oC/140 oF
:1.328 V
65 oC/149 oF
:1.920 V
70 oC/158 oF
:3.360 V
75 oC/167 oF
:12.032 V
80 oC/176 oF
:1.104 V
85 oC/185 oF
90 oC/194 oF
[Enabled]
[000]
[035]
[064]
[2 PWR]
[Disabled]
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning beep.
► Shut Down Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► Case Open Warning
This item is used to enable or disable case open warning function.
► CPU Temperature/System Temperature
The CPU/System temperature are automatically detected and displayed by the system.
► CPU Fan/System Fan1/System Fan2 Speed
The CPU fan/System fan speed are automatically detected and displayed by the system.
► CPU Core/DRAM Voltage/+ 3.3V/+12.0V/+1.1V
The current voltages are automatically detected and displayed by the system.
► CPU Smart Fan Function / System Smart Fan1 Function
This option is used to enable or disable smart fan function.
► Off PWM Temperature
It allows you set a temperature value from which smart fan stops its operation.
► Start PWM Temperature
It allows you set a temperature value from which smart fan starts its operation.
► Start PWM Value
It allows you to set an initial PWM value to drive the fan when the temperature reaches Start
value and smart fan begins its operation. The higher PWM value can achieve the faster fan
speed.
► Slope PWM Value
The slope controls the PWM value being stepped up or down versus temperature changes.
40
BIOS Security Features
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
BIOS Security Features
Security Settings
Supervisor Password : Not Installed User Password
: Not Installed
Enter]
Change Supervisor Password [Press Enter]
Help Item
Install or change the
password.
3
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
► Change Supervisor Password
This item is used to install or change supervisor password.
Enter New Password :
After you input Supervisor password, it then will ask you to input
user password optionally.
If you have installed the Supervisor Password, the following items will appear:
Load Optimal Defaults
Optimal defaults are the best settings of this motherboard. Always load
Load Optimal Defaults?
the Optimal defaults after updating the BIOS or after clearing the CMOS
values.
[OK]
[Cancel]
Select this option and press Enter, it will pop out a dialogue box to let
you load the defaults. Select <OK> and then press <Enter> to load the
defaults. Select <Cancel> and press <Enter>, it will not load.
By this default, BIOS have set the optimal performance parameters of system to improve the
performances of system components. But if the optimal performance parameters to be set cannot
be supported by your hardware devices (for example, too many expansion cards were installed),
the system might fail to work.
Save Changes and Exit
When you select this option and press <Enter>, a message
will be displayed in the center of the screen:
Select [OK] to save your changes to CMOS and exit the program, select [Cancel] or <ESC> to return to the main menu.
Save configuration changes and exit setup?
[OK]
[Cancel]
Discard Changes and Exit
If you select this option and press <Enter>, the following message
will be displayed in the center of the screen:
Select [OK] to exit CMOS without saving your modifications,
select [Cancel] or <ESC> to return to the main menu.
41
Discard changes and exit setup?
[OK]
[Cancel]
The utility CD that came with the motherboard contains useful
software and several utility drivers that enhance the motherboard features.
This chapter includes the following information:
■
Utility CD Introduction
■
Install driver and utility
■
FOX ONE
■
FOX LiveUpdate
■
FOX LOGO
■
FOX DMI
Note : Because each module is independent, so the section
number will be reorganized and unique to each module, please
understand.
Utility CD Introduction
This motherboard comes with one DVD. You can simply put it into your DVD-ROM drive, and the
main menu will be displayed on your PC screen to guide you how to install.
1. Install Driver
Use these options to install all the drivers for your system. You should install the drivers in order,
and you need to restart your computer after all the drivers have been installed.
A. AMD Chipset Driver
B. Realtek HDA Audio Driver
C. Realtek 811X LAN Driver
D. AMD RAID Driver (It appears when the “OnChip SATA Type” setting in BIOS is set to [RAID])
4
2. Software Utilities
Use these options to install additional software programs. FOX ONE is a very powerful user interface program which allows you to change your system setting without going to BIOS. Some auto
features help user to improve (or overclock) your system without being a computer literate.
A. FOX ONE
B. FOX LiveUpdate
C. FOX LOGO
D. FOX DMI
E. Microsoft DirectX 9.0
F. Adobe Acrobat Reader
G. Norton Internet Security
H. AMD RAID Utility
43
Install driver and utility
1. Install Driver
You must click "AMD Chipset Driver" to install it first. After that, you can click ”One Click Setup” to
install all the other drivers left, or you can click on each individual driver to install it manually.
Manual Installation Step by
Step
4
Automatic
Installation by
One Click.
Exit the
program
Click to visit
Foxconn's
website
Select to Install Utilities
Select to In- Browse CD Drop to System Tray
stall Drivers
2. Install Utility
You can select the specific utility to install.
44
FOX ONE
FOX ONE is a powerful utility for easily modifying system settings. It also allows users
to monitor various temperature values, voltage values, frequencies and fan speeds at
any time.
CA
UT
IO
N
With FOX ONE, you can :
■
Modify system performance settings, such as the CPU and memory bus speeds,
CPU voltages, fan speeds, and other system performance options.
■
Monitor hardware temperatures, voltages, frequencies and fan speeds.
Depending on hardware support, voltage monitoring and Fox Intelligent Stepping
features are optional and only supported in some models. If the option is selectable,
it also means the feature is supported.
■
Voltage Monitoring is supported only in FOX ONE Premium & Deluxe products.
■
Fox Intelligent Stepping is supported only in FOX ONE Deluxe products.
Supporting Operating Systems :
■
Windows XP (32-bit and 64-bit)
■
Windows Vista (32-bit and 64-bit)
Using FOX ONE :
CA
UT
IO
N
The very first time you run FOX ONE, F.I.S. Calibration function (FOX Intelligent
Stepping) will require you to calibrate the CPU’s loading. Click “OK” to proceed
and start the Utility. F.I.S. is a feature of FOX ONE, which can automatically adjust your
CPU clock based on your current system loading.
!
Before you running the FOX ONE program, the system parameters (such as CPU
clock, voltage...etc.) are controlled by BIOS settings. After you run FOX ONE, it will
take over, and the controlling right will be transferred to FOX ONE. Later, if you exit
FOX ONE, then BIOS control will be back again.
45
4
!
1. Main Page
Show CPU
Information
Toolbar
Alert Lamp
Switch Button
Skin Button
4
Exit
Minimum
Configuration
Homepage
Monitor Frequency/Voltage/Fan
speed/Temperature value
Toolbar
Use the toolbar to navigate to other pages.
Alert Lamp
When the system is in healthy state, the color of alert lamp is green. When the system
is in abnormal state, the alert lamp color is red.
Switch Button
Click this button, it will simplify the whole FOX ONE control panel to a smaller
information bar (i.e. Simple Mode) as depicted below, you can drag this bar to any
place on your screen to help you monitoring system status.
Exit FOX ONE
Click here to go back to
FOX ONE full screen
Click here will drop the FOX ONE to Windows system tray
46
Skin Button
There are more choices of FOX ONE screen panels. Click this button, you can select
your favorite skin (FOX ONE Panel).
Apply the changes
Cancel the changes
Exit
Click this button to exit the program.
Minimum
Click this button to drop the FOX ONE to Windows system tray located at the lower
right corner of your screen.
Homepage
Click this button to visit Foxconn motherboard website :
http://www.foxconnchannel.com
47
4
Click the new skin
picture to select
the new skin
4
Configuration
This menu allows you to configure :
1). Monitor interval (ms) :
This is to define the interval of different messages of system settings which are to
be displayed on Simple Mode screen. Minimum value is 1 second.
2). Simple Mode :
To select which message of system settings are to be displayed in the Simple
Mode. Messages such as CPU frequency, voltage...etc., they can be displayed one
by one in Simple Mode.
3). F.I.S. Calibration (FOX Intelligent Stepping, Optional)
This function will re-calibrate the CPU's loading, and it may take several minutes
to proceed. The FOX ONE calibration process will apply different loadings to
your CPU, record PWM IC voltage together with the CPU clock running at these
loadings, so it can define and estimate within a particular range of system loading,
what the CPU clock should be.
48
Step 1 : Click Calibration icon, a message pops out to ask for continue. Select Yes.
4
Step 2 : After data is collected, it will ask you to restart your computer now.
Later on, when the FOX ONE program is activated, and F.I.S. feature (in CPU
Page) is also enabled, FOX ONE will automatically adjust your CPU clock
according to your system loadings. (Loadings are like Power Gaming, Data
Mining...etc.)
49
2. CPU Page - CPU Control
4
This page lets you select (or overclock) CPU clock to meet the current performance
level of the system. The fastest and suitable CPU clock running for current system can
be calculated by FOX ONE automatically or manually input by yourselves.
Manual :
You can press the up/down button to adjust your CPU clock.
Auto :
Click this button to let FOX ONE check the highest CPU clock you can use. System
will raise the CPU clock step by step until it hangs, you can then push the RESET
button on your PC panel to restart the system. When system restarts, run FOX ONE
again, it will display a recommended highest CPU clock for you, click <Yes> to apply it.
Go to CPU page
Adjust by manual
Press Auto button to let FOX
ONE check the highest CPU
clock you can use.
Reset the
changes
FIS Features :
Apply the
Select the different changes
benchmarks
A message informs you to
push RESET button later if
the system hangs finally.
Click Yes to continue.
50
You can see the system is
raising CPU clock until the
system hangs.
Push RESET button on the
front panel of your system to
restart the computer.
4
Run FOX ONE program
again, it will inform you
the previous test found
that 255MHz is the
recommended CPU clock for
your system.
Click Yes to apply it to your
system.
Now, your system is running
at a CPU clock of 255MHz.
51
4
FOX Intelligent Stepping (F.I.S., Optional)
Select FOX Intelligent Stepping will allow your system to automatically adjust your
CPU clock rate based on different system loadings. For example, if you select Power
Gaming, CPU clock will be driven to run at its maximum speed. While in Energy
Saving, CPU will lower down its speed to a minimum. The four benchmarks - Power
Gaming, Data Mining, Office and Energy Saving, the references of their system
loading were calculated and defined in the FIS Calibration option of Configuration
menu. Select Auto, CPU will automatically adjust its clock according to current system
loading.
3. Frequency Page - Frequency Control
This page lets you set memory and PCI Express frequencies by manual.
Go to Freq. page
Close this page
Select the option
you want to set
Adjust by manual
Reset the changes
Apply the changes
52
4. Limit Setting
4.1 Limit Setting - CPU Temperature
This page lets you to set CPU high limit temperature and enable the alert function.
Go to Limit
Setting page
Show current CPU
temperature value
Enable alert function
when the CPU
temperature is higher
than high limit value
Set high limit by
dragging the lever
4.2 Limit Setting - System Temperature
This page lets you to set system high limit temperature and enable the alert function.
Show current system
temperature value
Enable alert function
when the system
temperature is higher
than high limit value
Show current high
limit value of system
temperature
Set high limit by
dragging the lever
53
4
Show current high
limit value of the CPU
temperature
4.3 Limit Setting - CPU Fan
This page lets you to set CPU fan low limit rpm and enable the alert function.
Show current CPU
fan rpm value
4
Enable alert function
when the CPU fan runs
slower than the low
limit rpm value
Show current low limit
rpm value of CPU fan
Set low limit rpm by
dragging the lever
4.4 Limit Setting - System Fan
This page lets you to set system fan low limit rpm and enable the alert function.
Show current system
fan rpm value
Enable alert function
when the system fan
runs slower than low
limit rpm value
Show current low limit
rpm value of system
fan
Set low limit rpm by
dragging the lever
54
4.5 Limit Setting - FAN1 Fan
This page lets you to set FAN1 fan low limit rpm and enable the alert function.
Show current FAN1
fan rpm value
Enable alert function
when the FAN1 fan
runs slower than low
limit rpm value
Set low limit rpm by
dragging the lever
5. Voltage Page - Voltage Control (Optional)
This page lets you set CPU voltage, memory voltage and North Bridge voltage
manually. CPU voltage can be stepped up/down by a unit of 12.5mV, while memory is
0.05V/step, and North Bridge is 0.04V/step.
Go to Voltage page
Select the option
you want to set
Adjust by manual
Reset the changes
Apply the changes
55
4
Show current low limit
rpm value of FAN1 fan
6. Fan Page - Fan Control
This page lets you enable Smart Fan function or set the fan speed by manual.
When Smart Fan is selected, you must use a 4-pin CPU cooler in your system.
Go to Fan page
Enable or disable
smart fan function
4
Set fan speed by
dragging the lever
Apply the changes
56
FOX LiveUpdate
FOX LiveUpdate is a useful utility to backup and update your system BIOS, drivers and utilities by
local or online.
Supporting Operating Systems :
■
Windows XP (32-bit and 64-bit)
■
Windows Vista (32-bit and 64-bit)
4
Using FOX LiveUpdate :
1. Local Update
1-1 Local Update - BIOS Information
This page lets you know your system BIOS information.
Minimum
Link to website
Exit
Show current
BIOS information
Toolbar
*** : please refer to the physical motherboard for detail.
57
1-2 Local Update - Backup
This page can backup your system BIOS. You can click “Backup”, and key in a file name, then
click “Save” to finish the backup operation. The extension of this backup file is ".BIN" for Award
BIOS and ".ROM" for AMI BIOS. Default directory is "C:\Desktop\My Documents" in Windows XP
and "Documents" in Vista. Make sure you can remember the file name together with the directory
which it is stored, prevented that you may need them to recover your BIOS later.
4
Key in a BIOS name
Click here
1-3 Local Update - Update
CA
UT
IO
N
This page helps you to update your BIOS from a local file. After click “Update”, An alert message
will be displayed to ensure if you really want to continue, click “Yes” to confirm. A setup wizard
will guide you to load a local BIOS file to finish the operation. You must remember from which
directory to load your new BIOS file (with an extension of ".BIN" for Award BIOS, ".ROM" for AMI
BIOS) before the setup wizard starts.
!
FOX LiveUpdate can automatically backup old BIOS before update. This feature can be
enabled in the "Configure-System" setup. Please refer to "Configure-System" section
for more detail. The default backup directory is C:\LiveUpdate_Temp, but the backup
file name will be automatically generated. It is hard to find it out from a backup directory,
and we recommend you using Explorer to check date/time message of this backup file
to find it out and write its name down to remember it.
58
2. Online Update
2-1 Online Update - Update BIOS
This page lets you update your system BIOS from Internet. Click “start”, it will search the new
BIOS from Internet. Then follow the wizard to finish the update operation.
Click here
Current information
4
Search new BIOS
from Internet
Select BIOS to update
Browse detailed
information
Update BIOS
Close the window
2-2 Online Update - Update Driver
This page lets you update your system drivers from Internet. Click “start”, it will search the new
drivers from Internet. Then follow the wizard to finish the update operation.
Click here
Current information
Search new drivers
from Internet
59
Select the driver to update
Browse detailed
information
Install the selected
driver
4
Close the window
2-3 Online Update - Update Utility
This page lets you update utilities from Internet. Click “start”, it will search the new utilities from
Internet. Then follow the wizard to finish the update operation.
Click here
Current information
Search new utilities
from Internet
Select the utility to update
Browse detailed
information
Install the selected
utility
Close the window
60
2-4 Online Update - Update All
This page lets you update your system drivers from Internet. Click “start”, it will search all new
BIOS/drivers/utilities from Internet. Then follow the wizard to finish the update operation.
Click here
Current information
Browse detailed
BIOS information
Browse detailed
driver information
Browse detailed
utility information
Close the window
61
4
Search all new BIOS/
drivers/utilities from
Internet
3. Configure
3-1 Configure - option
This page lets you set auto search options. After you enable the auto search function, FOX
LiveUpdate will start its searching from Internet and if any qualified item found, it will pop out a
message on the task bar to inform you to do the next step.
Click here
4
Set auto
search options
Set auto search
the latest
FOX LiveUpdate
Select search
which kind of
versions
Apply the changes
Reset to default value
Double click on the icon as show below, you can see the detailed information.
Double click here
62
When you enable "Auto Search FOX LiveUpdate", if your FOX LiveUpdate version is older, it will
auto search from internet and prompt you to install the new version.
Prompt you to
install the new
FOX LiveUpdate
4
3-2 Configure - System
This page lets you set the backup BIOS location and change different skin of the FOX LiveUpdate
utility.
Click here
Set the location of
download files or
auto backup BIOS
Select different skin
of the software
Reset to default value
Determine if the FOX LiveUpdate can
auto run when the system starts up
Apply the changes
63
3-3 Configure - Advance
This page lets you select to flash BIOS / Boot Block and clear CMOS. If you choose Flash Boot
Block, it means BIOS is not protective, and you must make sure the flash process is continuous
and without any interruption.
Click here
Select which BIOS ROM
to flash(Only available to
motherboard with backup
BIOS ROM )
Select to flash Boot Block
4
Select to clear CMOS
CA
UT
IO
N
Apply the changes
!
Reset to default value
We recommend that you had better keep the default setting unchanged to avoid any
damage.
4. About & Help
This page shows some information about FOX LiveUpdate.
Click here
Show information about
FOX LiveUpdate
64
FOX LOGO
FOX LOGO is a simple and useful utility to backup, change and delete the boot time
Logo. The boot Logo is the image that appears on screen during POST (Power-On
Self-Test).
You can prepare a JPG image (1024x768) file, then use FOX LOGO to open it and
change the boot time Logo. Boot time Logo will be displayed if you enable the BIOS
"Quiet Boot" setting in "Advanced BIOS Features" menu.
4
Supporting Operating Systems :
■
Windows XP (32-bit and 64-bit)
■
Windows Vista (32-bit and 64-bit)
Using FOX LOGO:
Main Page
Main screen
Exit
Backup
Minimize
Change
Website
About
Delete
NING
AR
!
W
When you change Logo or delete current Logo, the system will flash BIOS file automatically. During this time, please DO NOT shut down the application and the system,
or the motherboard will be damaged seriously.
65
FOX DMI
FOX DMI is a full Desktop Management Interface viewer, and it provides three DMI data
formats : Report, Data Fields and Memory Dump.
With DMI information, system maker can easily analyze and troubleshoot your motherboard if there is any problem occurred.
4
Supporting Operating Systems :
■
Windows XP (32-bit and 64-bit)
■
Windows Vista (32-bit and 64-bit)
Using FOX DMI:
Please operate this utility as the comments shows.
Click here to select
the type you want
to view.
Click here to select
the DMI Data format
you need
66
This chapter will cover two topics :
■
■
Creating a Bootable Array - Installing a new Windows XP
(or Vista) in a brand new RAID system.
Creating a Non-Bootable Array - Existing Windows XP
(or Vista) system with new RAID built as data storage.
It includes the following information :
■
■
■
■
■
■
■
RAID Configuration Introduction
Option ROM Utility
Create a RAID Driver Diskette
RAID Enable in BIOS
Select a RAID Array for use
Install a New Windows XP
Setting up a Non-Bootable RAID Array
The RAID BIOS Setup pictures shown in this chapter are for reference only, please refer to the practical screen.
Creating a Bootable Array - Installing a new Windows XP (or Vista) in
a brand new RAID system.
5
1. Follow 5-1 to create a RAID driver diskette.
2. Follow 5-2 to set RAID enabled in BIOS.
3. Follow 5-3 to select a RAID array for use.
4. Follow 5-4 to Install a new Windows Operating System.
What kinds of hardware and software you need here :
1. A floppy drive.
2. A DVD-ROM drive.
3. Several SATA hard disks.
4. A RAID driver diskette.
5. A motherboard driver CD. (To create RAID driver diskette if it is not bundled.)
6. Windows XP or Vista Install CD.
Creating a Non-Bootable Array - Existing Windows XP (or Vista)
system with new RAID built as data storage.
Follow 5-5 to go through the processes to build a new RAID array in your existing
Windows XP system, it includes :
1. Set RAID enabled in BIOS.
2. Follow 5-3 to select a RAID array for use.
3. Run setup program to install AMD RAID driver into your current Windows XP
system.
4. Use Administrative Tools in Control Panel to format new RAID array.
What kinds of hardware and software you need here :
1. A DVD-ROM drive.
2. Several SATA hard disks.
3. A motherboard driver CD.
68
RAID Configuration Introduction
RAID (Redundant Array of Independent Disks) is a method for computer data storage
schemes that divide and/or replicate data among multiple hard drives. RAID can be
designed to provide increased data reliability (fault tolerance) or increased I/O (input/
output) performance, or both. The following RAID configurations are provided for
users.
There are three major key concepts in RAID:
1. Mirroring : The copying of data to more than one disk;
2. Striping : The splitting of data across more than one disk;
3. Error correction : Where redundant data is stored to allow problems to be detected
and possibly fixed (known as fault tolerance).
The configuration affects reliability and performance in different ways. The problem
with using more disks is that it is more likely that one will go wrong, but by using
error checking the total system can be made more reliable by being able to survive
and repair the failure. Basic mirroring can speed up reading data as a system can
read different data from both the disks, but it may be slow for writing if it insists that
both disks must confirm that the data is correctly written. Striping is often used for
performance, where it allows sequences of data to be read off multiple disks at the
same time. Error checking typically will slow the system down as data needs to be
read from several places and compared. The design of RAID systems is therefore a
compromise and understanding the requirements of a system is important. Modern
disk arrays typically provide the facility to select the appropriate RAID configuration.
RAID is often used in high availability systems, where it is important that the system
keeps running as much of the time as possible.
69
5
Different RAID levels use one or more of these techniques, depending on the system
requirements. The main aims of using RAID are to improve reliability, important for
protecting information that is critical to a business, for example a database of customer
orders; or where speed is important, for example a system that delivers video on
demand TV programs to many viewers.
RAID 0 (Striped)
RAID 0 reads and writes sectors of data interleaved among multiple drives. If any disk
member fails, it affects the entire array. The disk array data capacity is equal to the
number of drive members times the capacity of the smallest member. RAID 0 does
not support fault tolerance.
RAID 1 (Mirror)
RAID 1 writes duplicate data onto a pair of drives and reads both sets of data in
parallel. If one of the mirrored drives suffers a mechanical failure or does not respond,
the remaining drive will continue to function. Due to redundancy, the drive capacity of
the array is the capacity of the smallest drive.
5
RAID Ready
A "RAID Ready" system is a specific system configuration that, with the addition of
a second Serial ATA hard drive, can be seamlessly migrated to a configuration that
provides either improved storage performance or data protection from a single hard
drive failure.
RAID 10 (Striped Mirror)
RAID 10 is a combination of striping and mirroring. This configuration provides optimal
speed and reliability, but you need four SATA hard disks.
Span (JBOD)
JBOD stands for “Just a Bunch of Disks”. Each drive is accessed as if it were on a
standard SCSI host bus adapter. This is useful when a single drive configuration is
needed, but it offers no speed improvement or fault tolerance. A spanned volume is a
formatted partition which data is stored on more than one hard disk, yet appears as
one volume. Unlike RAID, spanned volumes have no fault-tolerance, so if any disk
fails, the data on the whole volume could be lost. Additionally, the system or boot
partitions cannot be included in a spanned volume. FAT16/32 and NTFS file systems
may be used, and the volume can span up to 32 hard disks.
Comparison Table :
Solution
Hard Disks No.
Capacity
Performance
Reliability
Application
RAID0
>=2
All
Highest
Dangerous
Look for speed
RAID1
2
50%
Read faster
Excellent
100% Data backup
RAID10
>=4 (Even number)
Smallest*2
High
Excellent
Unlimited budget
Span
>=1
All
none
Dangerous
Big disk space
70
Option ROM Utility
The Option ROM Utility supports RAID 0, RAID 1 and RAID10 functions. It allows you
to get high performance with fault tolerance, big capacity, or data safety provided by
different RAID functions.
Here, we will use four SATA hard disks as an example to guide you through how
to configure your RAID system. Assume four hard disks are connected to the
motherboard :
SATA port 1 - HDS728090PLA380, 82.34GB
SATA port 2 - WDC WD1200JD-98HBB0, 120.03GB
SATA port 3- Hitachi HDT725025VLA3, 250.05GB
SATA port 4 - ST3320620AS, 320.07GB
NING
AR
!
W
The relationships between port numbers in the Option ROM Utility and SATA ports on
the motherboard are shown below. They are :
Channel 1 is the SATA port 1 of the motherboard.
Channel 2 is the SATA port 2.
Channel 3 is the SATA port 3.
Channel 4 is the SATA port 4.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ View Drives Assignment ]
Channel :ID Drive Model
Compatibilities Capacity(GB)
Assignment
1 :MasHDS728090PLA380
SATA 3G
82.34
Extent 1
82.28 Free
2 :MasWDC WD1200JD-98HBB0 SATA 1.5G
120.03
Extent 1
119.96 Free
3 :MasHitachi HDT725025VLA3 SATA 3G
250.05
Extent 1
249.99 Free
4 :MasST3320620AS
SATA 1.5G
320.07
Extent 1
320.00 Free
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Ctrl+H] Secure Erase
71
[PgUp/Dn] Page Change
5
To achieve the best performance and reliability, we highly recommend you
using the hard disks with the same brand, size and model number. Though
we are using four different hard disks as an example to describe RAID
function in this chapter, it is only helpful in explaining what the final disk
volume of the RAID array will be. In the real world, using the same model to
build a disk array is strongly recommended.
Two topics will be covered in the following sections :
1). Creating a Bootable Array - Installing a new Windows XP in a brand new RAID
system.
2). Creating a Non-Bootable Array - Existing Windows XP system with new RAID
built as data storage.
CA
UT
IO
N
Install SATA Hard Disks before we continue :
■
Shut down your computer.
■
Install SATA hard disks into the drive bays, connect all power and SATA cables.
!
5
■
Before installing the SATA hard disks, make sure to turn off the computer
and unplug the power cord from the power outlet to prevent damage to the
hardware.
72
5-1 Create a RAID Driver Diskette
If you want to install a brand new Windows XP on a RAID system, you need to create a
RAID driver floppy diskette which will be used during Windows XP installation later.
1. Find a PC, put a diskette into its floppy
drive A:, this diskette will be formatted later.
Put the driver CD into DVD-ROM drive.
3. Click "GO" to start.
4. Select the desired destination FDD drive.
It can be the default drive A: or any USB
FDD. Click "OK" to continue.
5. Insert a diskette, click "OK" to continue.
73
5
2. Depending on which platform your system
is, normally, it is a 32-bit XP system. Use
Windows explorer, and go to CD:\Driver\
AMD\RAID\Floppy\WinXP\, click on
RaidTool icon to start the creation.
6. You can input a volume label for this diskette,
click on "Start" to format.
5
7. Click on "OK" to go through this warning
message.
8. Format finished. Click "OK" to continue copying of
RAID driver into this diskette.
9. Check if the diskette contains the driver files.
74
5-2 RAID Enable in BIOS
1. Enter the BIOS setup by pressing <DEL> key when boot up.
2. Select the “Integrated Peripherals” from the “Main menu”, then select the “SATA
Configuration” menu and press <Enter> to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press <F10> to save the setting then PC will reboot itself.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
IDE Configuration
IDE Configuration
Help Item
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
5-3 Select a RAID Array for Use
When BIOS is restarted, it will display a message asking you to press [Ctrl-F] key to
enter the main menu of Option ROM Utility. Press [Ctrl-F], the Main Menu appears.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Main Menu ]
View Drive Assignment . . . . . . . [ 1 ]
Define LD . . . . . . . . . . . . . . . . . [ 2 ]
Delete LD . . . . . . . . . . . . . . . . . [ 3 ]
Controller Configuration . . . . . . [ 4 ]
[ Keys Available ]
Press 1..4 to Select Option
75
[ESC] Exit
5
Options
[Enabled]
OnBoard PCI IDE Controller
OnChip SATA Channel [Enabled] I
OnChip SATA Type [RAID]
Native IDE
[RAID]
SATA IDE Combined [Enabled] RAID
AHCI
Legacy IDE
Create RAID 0 (Striped)
Here, we will show you how to create two RAID 0 Logical Drives (LD) by using two
hard disks.
1. Select [2] from the main menu, "Define LD Menu" appears.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID
−−−−0
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
Capacity(GB)
2
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
163.99
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
Status
Functional
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
5
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
2. Press [Enter], the screen appears as below, select RAID 0.
3. Use [↓] key to select the hard disks, press [Space] key to change its assignment
status to "Y".
4. Press [Ctrl-Y] to save the setting.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
RAID 0
Total Drv
Stripe Block:
64 KB
Gigabyte Boundary: ON
0
Fast Init:
ON
Cache Mode: WriteThru
[ Drives Assignment ]
Channel :ID Drive Model
Compatibilities Capacity(GB)
Assignment
1 :MasHDS728090PLA380
SATA 3G
82.34 Y
2 :MasWDC WD1200JD-98HBB0 SATA 1.5G
120.03 Y
3 :MasHitachi HDT725025VLA3 SATA 3G
250.05 N
4 :MasST3320620AS
SATA 1.5G
320.07 N
[ Keys Available ]
[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change
76
5. A message prompts.
Press [Ctrl-Y] to erase the RAID array.
Fast Initialization Option has been selected
It will erase the MBR data of the disks,
<Press Ctrl-Y Key if you are sure to erase it>
<Press any other key to ignore this option>
6. Another screen prompts.
Press [Ctrl-Y]. Input 80GB to select the first
logical drive (LD1) and press [Enter].
Press Ctrl-Y to Modify Array Capacity or press any
other key to use maximum capacity...
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
Total Drv
LD 1
RAID
RAID
0 0
Stripe Block:
64 KB
Gigabyte Boundary: OFF
Capacity(GB)
2
164.56
Fast Init:
ON
Cache Mode: WriteThru
[ Drives Assignment ]
Channel :ID Drive Model
Compatibilities Capacity(GB)
Assignment
1 :MasHDS728090PLA380
SATA 3G
82.34 Y
2 :MasWDC WD1200JD-98HBB0 SATA 1.5G
120.03 Y
Enter HDT725025VLA3
array capacity (in GB)
here:3G
3 :MasHitachi
SATA
250.05 N
4 :MasST3320620AS
SATA 1.5G
320.07 N
5
[ Keys Available ]
[0-9] Input Capacity
[Enter] Save
[Backspace] Delete
[ESC] exit
7. The selection of LD1 array is completed.
As we want to introduce how to create two logical drives by using the same two hard
drives here, so we will press [↓] to select LD2.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID 0
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
2
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
77
Capacity(GB)
Status
163.99
Functional
79.99
Functional
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
8. When LD2 is selected, press [Enter] to continue.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID 0
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
Capacity(GB)
2
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
79.99
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
Status
Functional
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
5
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
9. You can see in the previous example, about 40GB of Channel 1 and 2 hard disks were
allocated. Select the remaining spaces from them for RAID 0 again.
Press [Ctrl-Y] to save the setting.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 2
RAID 0
Total Drv
Stripe Block:
64 KB
Gigabyte Boundary: ON
2
Fast Init:
ON
Cache Mode: WriteThru
[ Drives Assignment ]
Channel :ID Drive Model
Compatibilities Capacity(GB)
Assignment
1 :MasHDS728090PLA380
SATA 3G
42.34 Y
2 :MasWDC WD1200JD-98HBB0 SATA 1.5G
80.03 Y
3 :MasHitachi HDT725025VLA3 SATA 3G
250.05 N
4 :MasST3320620AS
SATA 1.5G
320.07 N
[ Keys Available ]
[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change
78
10. A message prompts.
Press [Ctrl-Y] to erase the RAID array.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
Total Drv
LD 2
RAID 0
Stripe Block:
64 KB
Gigabyte Boundary: ON
2
Fast Init:
ON
Cache Mode: WriteThru
Fast
Initialization Option
has been selected
Channel :ID Drive
Model
Compatibilities
Capacity(GB)
Assignment
It will erase the MBR data
of the3G
disks,
1 :MasHDS728090PLA380
SATA
42.28 Y
<Press
Ctrl-Y Key if you SATA
are sure
to erase it> 79.96 Y
2 :MasWDC
WD1200JD-98HBB0
1.5G
<Press
any other key to ignore
this option> 250.05 N
3 :MasHitachi
HDT725025VLA3
SATA 3G
4 :MasST3320620AS
SATA 1.5G
320.07 N
5
[ Keys Available ]
[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change
11. The remaining disk spaces are assigned to LD2. The size is about 42GB*2 = 84GB.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID 0
RAID
−−−−0
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
2
2
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
79
Capacity(GB)
79.99
83.99
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
Status
Functional
Functional
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Create RAID 1 (Mirror)
Here, we will show you how to create one Mirrored Logical Drives (LD) by using two
hard disks.
1. Select [2] from the main menu, "Define LD Menu" appears.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID
−−−−0
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
2
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Capacity(GB)
163.99
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
Status
Functional
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
5
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
2. Press [Enter], the screen appears as below, select RAID 1.
3. Use [↓] key to select the hard disks, press [Space] key to change its assignment
status to "Y".
4. Press [Ctrl-Y] to save the setting.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
Total Drv
LD 1
RAID 1
Stripe Block:
NA
Gigabyte Boundary: ON
2
Fast Init:
ON
Cache Mode: WriteThru
[ Drives Assignment ]
Channel :ID Drive Model
Compatibilities Capacity(GB)
Assignment
1 :MasHDS728090PLA380
SATA 3G
82.34 N
2 :MasWDC WD1200JD-98HBB0 SATA 1.5G
120.03 N
3 :MasHitachi HDT725025VLA3 SATA 3G
250.05 Y
4 :MasST3320620AS
SATA 1.5G
320.07 Y
[ Keys Available ]
[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change
80
5. A message prompts.
Press [Ctrl-Y] to erase the RAID array.
Fast Initialization Option has been selected
It will erase the MBR data of the disks,
<Press Ctrl-Y Key if you are sure to erase it>
<Press any other key to ignore this option>
6. Another screen prompts.
Press any key to use the maximum capacity.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
RAID 1
Total Drv
Stripe Block:
NA
Gigabyte Boundary: ON
2
Fast Init:
ON
Cache Mode: WriteThru
[ Drives Assignment ]
Channel :ID Drive Model
Compatibilities Capacity(GB)
Assignment
1 :MasHDS728090PLA380
SATA 3G
82.34 N
2 :MasWDC WD1200JD-98HBB0 SATA 1.5G
120.03 N
3 :MasHitachi HDT725025VLA3 SATA 3G
250.05 Y
4 :MasST3320620AS
SATA 1.5G
320.07 Y
5
Fast Initial
Press Ctrl-Y to Modify Array Capacity or press any
other key to use maximum capacity...
7. The creation of RAID 1 is completed.
The final capacity of 249.99GB (250GB) is the smaller size of the two hard drives.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
−−−−
−−−−
−−−−1
RAID
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
−−−−
−−−−
−−−−
2
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
81
Capacity(GB)
−−−−−−−−
−−−−−−−−
−−−−−−−−
249.99
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
Status
−−−−
−−−−
−−−−
Functional
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Create RAID 10 (Striped Mirror)
Here, we will show you how to create one Striped Mirror Logical Drives (LD) by using
four hard disks.
1. Select [2] from the main menu, "Define LD Menu" appears.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID
−−−−0
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
2
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Capacity(GB)
163.99
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
Status
Functional
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
5
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
2. Press [Enter], the screen appears as below, select RAID 10.
3. Use [↓] key to select the hard disks, press [Space] key to change its assignment
status to "Y".
4. Press [Ctrl-Y] to save the setting.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
Total Drv
LD 1
RAID 10
Stripe Block:
64 KB
Gigabyte Boundary: ON
4
Fast Init:
ON
Cache Mode: WriteThru
[ Drives Assignment ]
Channel :ID Drive Model
Compatibilities Capacity(GB)
Assignment
1 :MasHDS728090PLA380
SATA 3G
82.34 Y
2 :MasWDC WD1200JD-98HBB0 SATA 1.5G
120.03 Y
3 :MasHitachi HDT725025VLA3 SATA 3G
250.05 Y
4 :MasST3320620AS
SATA 1.5G
320.07 Y
[ Keys Available ]
[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change
82
5. A message prompts.
Press [Ctrl-Y] to erase the RAID array.
Fast Initialization Option has been selected
It will erase the MBR data of the disks,
<Press Ctrl-Y Key if you are sure to erase it>
<Press any other key to ignore this option>
6. Another screen prompts.
Press any key to use the maximum capacity.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
RAID 10
Total Drv
Stripe Block:
64 KB
Gigabyte Boundary: ON
4
Fast Init:
ON
Cache Mode: WriteThru
[ Drives Assignment ]
Channel :ID Drive Model
Compatibilities Capacity(GB)
Assignment
1 :MasHDS728090PLA380
SATA 3G
82.34 Y
2 :MasWDC WD1200JD-98HBB0 SATA 1.5G
120.03 Y
3 :MasHitachi HDT725025VLA3 SATA 3G
250.05 Y
4 :MasST3320620AS
SATA 1.5G
320.07 Y
5
Fast Initial
Press Ctrl-Y to Modify Array Capacity or press any
other key to use maximum capacity...
7. The creation of RAID 10 is completed.
The final capacity of 163.99GB (81.995GB*2) is twice capacities of the smallest size
of the four hard drives.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID 0
10
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
42
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
83
Capacity(GB)
Status
163.99
Functional
Functional
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
Create RAID Ready
A "RAID Ready" system is a specific system configuration that, with the addition of
a second Serial ATA hard drive, can be seamlessly migrated to a configuration that
provides either improved storage performance or data protection from a single hard
drive failure.
1. Select [2] from the main menu, "Define LD Menu" appears.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID
−−−−0
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
2
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Capacity(GB)
163.99
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
Status
Functional
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
5
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
2. Press [Enter], the screen appears as below, select RAID Ready.
3. Use [↓] key to select the hard disk, press [Space] key to change its assignment
status to "Y".
4. Press [Ctrl-Y] to save the setting.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
Total Drv
LD 1
RAID READY
Stripe Block:
NA
Gigabyte Boundary: NA
1
Fast Init:
ON
Cache Mode: WriteThru
[ Drives Assignment ]
Channel :ID Drive Model
Compatibilities Capacity(GB)
Assignment
1 :MasHDS728090PLA380
SATA 3G
82.34 N
2 :MasWDC WD1200JD-98HBB0 SATA 1.5G
120.03 N
3 :MasHitachi HDT725025VLA3 SATA 3G
250.05 N
4 :MasST3320620AS
SATA 1.5G
320.07 Y
[ Keys Available ]
[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change
84
5. A message prompts.
Press [Ctrl-Y] to erase the RAID array.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
RAID READY
Total Drv
Stripe Block:
NA
Gigabyte Boundary: NA
1
Fast Init:
ON
Cache Mode: WriteThru
Fast
Initialization Option
has been selected
Channel :ID Drive
Model
Compatibilities
Capacity(GB)
Assignment
It will erase the MBR data
of the3G
disks,
1 :MasHDS728090PLA380
SATA
42.28 N
<Press
Ctrl-Y Key if you SATA
are sure
to erase it> 79.96 N
2 :MasWDC
WD1200JD-98HBB0
1.5G
<Press
any other key to ignore
this option> 250.05 N
3 :MasHitachi
HDT725025VLA3
SATA 3G
4 :MasST3320620AS
SATA 1.5G
320.07 Y
5
[ Keys Available ]
[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change
6. The creation of RAID Ready is completed.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID Mode
RAID
0
RAID
READY
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
21
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
85
Capacity(GB)
Status
163.99
Functional
319.99 Functional
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
Create JBOD
Here, we will show you how to create a JBOD Logical Drives (LD) by using four hard
disks.
1. Select [2] from the main menu, "Define LD Menu" appears.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID
−−−−0
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
Capacity(GB)
2
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
163.99
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
Status
Functional
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
5
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
2. Press [Enter], the screen appears as below, select JBOD.
3. Use [↓] key to select the hard disks, press [Space] key to change its assignment
status to "Y".
4. Press [Ctrl-Y] to save the setting.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
LD 1
RAID Mode
Total Drv
Stripe Block:
NA
Gigabyte Boundary: NA
JBOD
4
Fast Init:
ON
Cache Mode: NA
[ Drives Assignment ]
Channel :ID Drive Model
Compatibilities Capacity(GB)
Assignment
1 :MasHDS728090PLA380
SATA 3G
82.34 Y
2 :MasWDC WD1200JD-98HBB0 SATA 1.5G
120.03 Y
3 :MasHitachi HDT725025VLA3 SATA 3G
250.05 Y
4 :MasST3320620AS
SATA 1.5G
320.07 Y
[ Keys Available ]
[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change
86
5. A message prompts.
Press [Ctrl-Y] to erase the RAID array.
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
LD 1
RAID Mode
Total Drv
Stripe Block:
64 KB
Gigabyte Boundary: ON
JBOD
4
Fast Init:
ON
Cache Mode: WriteThru
Fast
Initialization Option
has been selected
Channel :ID Drive
Model
Compatibilities
Capacity(GB)
Assignment
It will erase the MBR data
of the3G
disks,
1 :MasHDS728090PLA380
SATA
42.28 Y
<Press
Ctrl-Y Key if you SATA
are sure
to erase it> 79.96 Y
2 :MasWDC
WD1200JD-98HBB0
1.5G
<Press
any other key to ignore
this option> 250.05 Y
3 :MasHitachi
HDT725025VLA3
SATA 3G
4 :MasST3320620AS
SATA 1.5G
320.07 Y
5
[ Keys Available ]
[↑] Up [↓] Down [ESC] Exit [Space] Change [Ctrl-Y] Save [PgUp/Dn] Page Change
6. The creation of JBOD is completed.
Total size is 82.34+120.03+250.05+320.07 = 772.49GB
Option ROM Utility (c) 2009 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID
JBOD0
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
42
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
87
Capacity(GB)
Status
163.99
Functional
772.51
Functional
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
−−−−−−−−
−−−−
5-4 Install a New Windows XP
Assume a Mirrored array (249.99GB) was created as introduced in section 5-3, after
the system restarts :
1. Press <DEL> to enter BIOS Setup during POST.
2. Insert the Windows installation CD into the optical drive.
3. Set the “1st Boot Device” to “CD/DVD-ROM”, save changes and exit BIOS.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Boot Device Priority
5
Boot Device Priority
Item Help
[CD/DVD:SS-DVD-ROM] Specifies the boot
1st Boot Device
[CDROM]
2nd Boot Device
[HDD:SM-HDS728080PL] sequence from the
3rd Boot Device
[1st Floppy Drive] available devices.
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F2/F3:Change Colors
F9: Optimized Defaults
4.The computer will reboot, and it will start installing Windows Operating System.
Watch the screen carefully, when the following picture appears, press <F6> key
immediately. If you forget to do this, PC will go to an fatal blue screen, and you
may need to reboot the system again. PC may not respond to your <F6> input
immediately, and it keeps loading files until the next screen displays.
Windows Setup
Press F6 if you need to install a 3rd party SCSI or RAID driver.
88
5.After some files are copied to your system, the following picture appears, press <S>
to continue the specific driver installation.
Windows Setup
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage device(s):
<none>
* To specify additional SCSI adapters, CD-ROM drivers, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
S=Specify Additional Device
ENTER=Continue
F3=Exit
6. It will ask you to insert the RAID driver diskette into your floppy drive. Press <Enter>
after it is done.
Windows Setup
Please insert the disk labeled
manufacturer-supplied hardware support disk
into Drive A:
* Press ENTER when ready
Enter=Continue ESC=Cancel F3=Exit
89
5
7. There are two drivers, for your 32-bit XP system, press [Enter] to select the first
driver - "AMD AHCI Compatible RAID Controller-x86 platform".
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
5
AMD
AHCICompatible
CompatibleRAID
RAIDController-x86
Controller-x86platform
platform
ATI AHCI
AMD AHCI Compatible RAID Controller-x64 platform
ENTER=Select
F3=Exit
8.A confirmation message appears to double check if the driver is really what we
wanted, press <Enter> to continue.
Windows Setup
Setup will load support for the following mass storage device(s):
AMD AHCI Compatible RAID Controller-x86 platform
* To specify additional SCSI adapters, CD-ROM drivers, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
S=Specify Additional Device
ENTER=Continue
90
F3=Exit
9. Windows will display the partition of your system. As we are using a Mirrored RAID
array as an example, its size 232.88GB is now displayed as 238410MB. You can
press [C] to create partitions as many as you wish, assign them C:, D: or E: logical
drive names.
(Note : 238410MB/1024 = 232.82GB)
Windows XP Professional Setup
The following list shows the existing partitions and
unpartitioned space on this computer.
Use the UP ad DOWN ARROW keys to select an item in the list.
● To set up Windows XP on the selected item, press ENTER.
● To create a partition in the unpartitioned space, press C.
● To delete the selected partitions, press D.
238410 MB Disk 0 at Id 1 on bus 0 on ahcix86 [MBR]
Unpartitioned space
238410
MB
5
ENTER=Install
C=Create Partition
F3=Quit
10.In this example, we will create a 30GB partition C: and leave the remainding space
as a partition E:. (D: is allocated by a DVD drive)
11. Press <Enter> to install Windows. The Windows XP install processes will ask you
to format your hard disk, then copy files...etc. Follow the installation steps until the
whole Windows is setup.
Windows XP Professional Setup
The following list shows the existing partitions and
unpartitioned space on this computer.
Use the UP ad DOWN ARROW keys to select an item in the list.
● To set up Windows XP on the selected item, press ENTER.
● To create a partition in the unpartitioned space, press C.
● To delete the selected partitions, press D.
238410 MB Disk 0 at Id 1 on bus 0 on ahcix86 [MBR]
C: Partition1 [New (Raw)]
E: Partition2 [New (Raw)]
Unpartitioned space
ENTER=Install
D=Delete Partition
29996 MB ( 29996 MB free)
208406 MB ( 208405 MB free)
8 MB
F3=Quit
91
5-5 Setting Up a Non-Bootable RAID Array
This section assumes the following setup :
■ Boot Disk with Windows XP installed :
One hard disk HDS728090PLAT20 (80GB) is connected to the IDE channel, and set
to Master.
■ A Mirrored RAID Array Disk :
Two SATA hard disks are configured as a mirrored RAID1 array, they are :
Hitachi HDT725025VLA3, (250.05GB) connected to SATA port2 of the motherboard.
Seagate ST3320620AS, (320.07GB) connected to SATA port3.
■ A SATA DVD Drive :
A DVD drive connected to SATA port1.
5
NING
AR
!
W
To achieve the best performance and reliability, we highly recommend you
using the hard disks with the same brand, size and model number. Though
we are using different brand of hard disks as an example here, the purpose
is only for easy understanding.
1. Reboot your system, and go to "SATA Configuration" menu.
Enable the RAID function. Press [F10] to save the settings and reboot.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
IDE Configuration
IDE Configuration
Help Item
Options
[Enabled]
OnBoard PCI IDE Controller
OnChip SATA Channel [Enabled] I
OnChip SATA Type [RAID]
Native IDE
[RAID]
SATA IDE Combined [Enabled] RAID
AHCI
Legacy IDE
[RAID]
↑↓←→:Move Enter:Select
F1:General Help
+/-/:Value F10:Save
ESC:Exit
F9:Optimized Defaults
92
2. Select a RAID array for use (also can refer to section 5-3)
After rebooting your computer, you will see the RAID software prompting you to
press [Ctrl-F].
Press [Ctrl-F] to enter the Option ROM Utility and configure the mirrored RAID array
as described in the 5-3 section. Finally, you can reach this step as depicted.
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
[ Define LD Menu ]
LD No
RAID Mode
LD 1
LD 2
LD 3
LD 4
LD 5
LD 6
LD 7
LD 8
LD 9
LD10
RAID 0
1
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Total Drv
2
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
Capacity(GB)
163.99
249.99
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
−−−−−−−−
Status
Functional
Functional
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
5
[ Keys Available ]
[↑] Up
[↓] Down
[ESC] Exit
[Enter] Select
3. Exit Option ROM Utility and restart computer to go to Windows.
4. In Windows, click "Cancel" to skip any "Found New Hardware Wizard".
Use driver CD and click on "AMD RAID Driver" to install the AMD RAID driver. The
RAID driver will be installed only when you select "RAID" in "OnChip SATA Type"
setting. If you do not select RAID, then RAID driver will not be installed.
93
5
5. After the AMD RAID driver is installed, it will ask you to click "Finish" to restart your
computer.
6. When Windows starts, a message is prompting you to reboot again.
Click "Yes" to restart your computer.
94
7. After PC starts, the RAID array is now ready to be initialized under Windows.
Launch Computer Management by clicking Start -> (Settings ->) Control Panel then
open the Administrative Tools folder and double click on Computer Management.
Click Disk Management (under the Storage section).
The Initialize and Convert Disk Wizard appears. Click "Next" to continue.
The RAID array is named as Disk1 and its status is unknown and not initialized.
5
8. A "Select Disks to Initialize" window will appear. The disks listed depend on how
many arrays you have configured. Select "Disk1" and click "Next" to continue.
9. When "Select Disks to Convert" window appears, do not select anything and click
"Next" to continue.
10. When the "Completing the Initialize and Convert Disk Wizard" window appears,
click "Finish" to complete the wizard.
95
5
11. The Computer Management window appears. The actual disks listed will depend
on your system. In below figure, you can see there is a 232.82 GB unallocated
partition. You must format the unallocated disk space before using it.
Right click "Unallocated space", select "New Partition…" and follow the Wizard
instructions.
12. When "New Partition Wizard" appears, click "Next" to continue.
13. When "Primary partition" screen appears, click "Next" to continue.
14. When "Specify Partition Size" screen appears, click "Next" to continue.
15. When "Assign Drive Letter or Path" screen appears, click "Next" to continue.
16. Click "Finish" to end the "New Partition Wizard".
96
17. The format of disk array (Disk1) is in processing.
5
18. Format completed, now you can start using your RAID array.
97
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement