S P E C F I L E
Ceiling mount bracket for low ceilings
ET-PKD100S
Description
This ceiling mount bracket is to be used when mounting Panasonic projectors to the ceiling.
Specifications
Vertical correction angle:
Horizontal slant correction angle:
Horizontal turn correction angle:
Dimensions (W x H x D):
Weight:
+5°, -5°
±2.5°
±2.4°
507 x 151 x 425 mm
(19-31/32˝ x 5-15/16˝ x 16-23/32˝)
8.1 kg (17.9 lbs)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Parts Attachment plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Projector mount bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Angle adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted hex bolts (M6 x 25) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Washer-fitted hex bolts (M6 x 12) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
C a u t i o n :
Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has sufficient strength. Read the enclosed mounting instructions thoroughly before starting.
Dimensions
Illustration shows the ET-PKD100S attached to the projector.
Attachment plate
Attachment plate
285
(11-7/32˝)
Projector
107.5
(4-7/32˝)
215
(8-15/32˝)
260
(10-1/4˝)
107.5
(4-7/32˝) unit : mm (inch)
NOTE: This illustration is not drawn to scale.
< 1 > As of December 2006