Panasonic | Lumix DMC-FT2 | Operating instructions | Panasonic Lumix DMC-FT2

Panasonic Lumix DMC-FT2
DMC-FT2&TS2EB-VQT2M41_eng.book
1 ページ
2010年1月29日 金曜日 午後7時59分
Basic Operating Instructions
Digital Camera
Model No.
DMC-FT2
Before use, please read these instructions completely.
Please also refer to Operating
Instructions (PDF format)
recorded on the CD-ROM
containing the Operating Instructions
(supplied).
You can learn about advanced operation methods
and check the Troubleshooting.
Web Site: http://www.panasonic-europe.com
Model number suffix “EB” denotes UK model.
VQT2M41
EB
until
2010/2/28
DMC-FT2&TS2EB-VQT2M41_eng.book
2 ページ
2010年1月29日 金曜日 午後7時59分
Please be sure to read “(Important) About the waterproof/dustproof and
anti-shock performance of the camera” (P8) and “Maintenance and
waterproof performance” (P10) before using this unit underwater to
prevent the unit from being mishandled, which may cause water to seep in.
Dear Customer,
We would like to take this opportunity to thank you for purchasing this Panasonic
Digital Camera. Please read these Operating Instructions carefully and keep them
handy for future reference. Please note that the actual controls and components,
menu items, etc. of your Digital Camera may look somewhat different from those
shown in the illustrations in these Operating Instructions.
Carefully observe copyright laws.
• Recording of pre-recorded tapes or discs or other published or broadcast
material for purposes other than your own private use may infringe copyright
laws. Even for the purpose of private use, recording of certain material may be
restricted.
Information for Your Safety
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT
DAMAGE,
• DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING
OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHALL BE PLACED ON THE APPARATUS.
• USE ONLY THE RECOMMENDED ACCESSORIES.
• DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
Product Identification Marking is located on the bottom of units.
2 VQT2M41 (ENG)
VQT2M41~Safety_eng.fm
3 ページ
2010年1月30日 土曜日 午後5時7分
Caution for AC mains lead
For your safety, please read the following
text carefully.
This appliance is supplied with a moulded
three pin mains plug for your safety and
convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced
please ensure that the replacement fuse
has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark  or the BSI
mark  on the body of the fuse.
If the plug contains a removable fuse
cover you must ensure that it is refitted
when the fuse is replaced.
If you lose the fuse cover the plug must
not be used until a replacement cover is
obtained.
A replacement fuse cover can be
purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS
UNSUITABLE FOR THE SOCKET
OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND
THE PLUG CUT OFF AND DISPOSED
OF SAFELY.
THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT OFF
PLUG IS INSERTED INTO ANY 13AMPERE SOCKET.
If a new plug is to be fitted please
observe the wiring code as stated below.
If in any doubt please consult a qualified
electrician.
 IMPORTANT
The wires in this mains lead are coloured
in accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with
the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured Blue must be
connected to the terminal which is marked
with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be
connected to the terminal which is marked
with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER
WIRE TO THE EARTH TERMINAL
WHICH IS MARKED WITH THE LETTER
E, BY THE EARTH SYMBOL  OR
COLOURED GREEN OR
GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOFKEEP DRY.
 Before use
Remove the connector cover.
 How to replace the fuse
The location of the fuse differ according to
the type of AC mains plug (figures A and
B). Confirm the AC mains plug fitted and
follow the instructions below.
Illustrations may differ from actual AC
mains plug.
1. Open the fuse cover with a screwdriver.
Figure A
Figure B
Fuse cover
2. Replace the fuse and close or attach
the fuse cover.
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
(ENG) VQT2M41
3
VQT2M41~Safety_eng.fm
4 ページ
2010年1月30日 土曜日 午後5時7分
∫ About the battery pack
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in an automobile exposed to direct sunlight for a
long period of time with doors and windows closed.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC or
incinerate.
4 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
5 ページ
2010年1月29日 金曜日 午後7時59分
∫ About the battery charger
CAUTION!
• DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS
WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE
HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY
OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
• DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
• DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED
CANDLES, ON THE UNIT.
• DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY
MANNER.
• The battery charger is in the standby condition when the AC power supply cord
is connected. The primary circuit is always “live” as long as the power cord is
connected to an electrical outlet.
∫ Cautions for Use
• Always use a genuine Panasonic AC adaptor (DMW-AC5E; optional).
• Always use a genuine Panasonic multi conversion adaptor (DMW-MCA1; optional).
• When using an AC adaptor, use the AC cable supplied with the AC adaptor.
• Do not use any other AV cables except the supplied one.
• Do not use any other cables except a genuine Panasonic HDMI mini cable
(RP-CDHM15, RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
• Do not use any other USB connection cables except the supplied one.
Keep the camera as far away as possible from electromagnetic equipment
(such as microwave ovens, TVs, video games etc.).
• If you use the camera on top of or near a TV, the pictures and sound on the
camera may be disrupted by electromagnetic wave radiation.
• Do not use the camera near cell phones because doing so may result in noise
adversely affecting the pictures and sound.
• Recorded data may be damaged, or pictures may be distorted, by strong
magnetic fields created by speakers or large motors.
• Electromagnetic wave radiation generated by microprocessors may adversely
affect the camera, disturbing the pictures and sound.
• If the camera is adversely affected by electromagnetic equipment and stops
functioning properly, turn the camera off and remove the battery or disconnect
AC adaptor (DMW-AC5E; optional). Then reinsert the battery or reconnect AC
adaptor and turn the camera on.
Do not use the camera near radio transmitters or high-voltage lines.
• If you record near radio transmitters or high-voltage lines, the recorded pictures
and sound may be adversely affected.
(ENG) VQT2M41
5
VQT2M41~Safety_eng.fm
6 ページ
2010年2月3日 水曜日 午後3時43分
Information for Users on Collection and Disposal of Old Equipment
and used Batteries
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical and
electronic products and batteries should not be mixed with
general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to applicable
collection points, in accordance with your national
legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you
will help to save valuable resources and prevent any
potential negative effects on human health and the
environment which could otherwise arise from inappropriate
waste handling.
For more information about collection and recycling of old
products and batteries, please contact your local
municipality, your waste disposal service or the point of sale
where you purchased the items.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further
information.
Cd
[Information on Disposal in other Countries outside the
European Union]
These symbols are only valid in the European Union. If you
wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of
disposal.
Note for the battery symbol (bottom two symbol
examples):
This symbol might be used in combination with a chemical
symbol. In this case it complies with the requirement set by
the Directive for the chemical involved.
6 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
7 ページ
2010年1月29日 金曜日 午後7時59分
Contents
Information for Your Safety ........................................................................... 2
(Important) About the waterproof/
dustproof and anti-shock performance of the camera................................... 8
Maintenance and waterproof performance ................................................. 10
• Using the camera underwater ............................................................... 14
• Causes of water leak ............................................................................ 15
• Caring of the camera after using it underwater ..................................... 16
Accessories................................................................................................. 18
Names of the Components ......................................................................... 20
Charging the Battery ................................................................................... 22
About the Built-in Memory/the Card ............................................................ 24
Inserting and Removing the Card (optional)/the Battery ............................. 25
Setting Date/Time (Clock Set)..................................................................... 26
• Changing the clock setting .................................................................... 26
Setting the Menu ......................................................................................... 27
Selecting the [REC] Mode........................................................................... 28
Taking pictures using the automatic function
(ñ: Intelligent Auto Mode) ......................................................................... 29
• Scene detection .................................................................................... 30
• AF Tracking Function............................................................................ 30
Recording Motion Picture............................................................................ 31
Playing back Pictures ([NORMAL PLAY])................................................... 32
Deleting Pictures ......................................................................................... 33
Reading the Operating Instructions
(PDF format) ............................................................................................... 34
Specifications .............................................................................................. 36
(ENG) VQT2M41
7
DMC-FT2&TS2EB-VQT2M41_eng.book
8 ページ
2010年1月29日 金曜日 午後7時59分
(Important) About the waterproof/
dustproof and anti-shock performance of
the camera
• Please observe the following precautions, and avoid using this camera in any
situation where the camera is subject to high water pressure. This camera’s
waterproof/dustproof rating complies with the “IPX8” and “IP6X” ratings.
Provided the care and maintenance guidelines described in this document are
strictly followed, this camera can operate underwater, to a depth not exceeding
10 m (33 feet) for a time not exceeding 60 minutes.¢1
• This camera also complies with “MIL-STD 810F (Method 516.5-Shock)”. The
camera has cleared a drop test from a height of 2 m (6.6 feet) onto 3 cm
(0.10 feet) thick plywood. In most cases this camera should not sustain any
damage if dropped from a height not exceeding 2 m (6.6 feet).¢2
• Supplied accessories are not waterproof (excluding hand strap/silicon jacket).
¢1 This means that the camera can be used underwater for specified time in
specified pressure in accordance with the handling method established by
Panasonic. This does not guarantee no destruction, no malfunction, or
waterproofing in all conditions.
¢2 This does not guarantee no destruction, no malfunction, or waterproofing in all
conditions.
Observe the following precautions and avoid using under water pressure
exceeding the guaranteed performance, and in an environment with
excessive dust or sand.
Waterproofing is not guaranteed if the unit is subject to an impact as a result
of being hit or dropped etc.
If an impact to the camera occurs, it should be inspected (subject to a fee) by
a Panasonic’s service centre to verify that the waterproofing is still effective.
Any malfunction caused by customer misuse, or mishandling will not be
covered by the warranty.
Note
• The picture can become whitish if there is dirt e.g. fingerprints on the lens.
When it is dirty, lightly wipe the surface of the lens with soft and dry cloth.
8 VQT2M41 (ENG)
VQT2M41~Body1_eng.fm 9 ページ
2010年2月3日 水曜日 午後3時44分
∫ Handling of the camera
• Do not leave the camera for a long period of time in places where temperature is
very low (ski resort etc.) or very high [above 40 oC (104 oF)], inside a car under
strong sunlight, close to a heater, on the beach, etc. Waterproof performance
may be degraded.
• The inside of this unit is not waterproof. Do not open or close the card/battery
door or terminal cover close to the water by the sea, a lake or river, or with wet
hands.
• Waterproof function of the camera is for sea water and fresh water only.
• Operation may not be possible when snow or water on the zoom lever, mode
dial or camera [OFF/ON] button the buttons freezes at cold places like ski
resorts etc.
∫ About the [PRECAUTIONS] demonstration display
• Please check beforehand to maintain the waterproof performance.
[PRECAUTIONS] is displayed when the power is turned
on for the first time after purchase, with the card/battery
door completely closed.
• The [PRECAUTIONS] screen will not display the next time
you turn on the power if you start the slide show by selecting
[YES], and then select [END] once it has completed. Select
[REPLAY] to see the slide show again.
Note
• It will automatically skip to clock setting screen if [NO] is selected before the
slide show starts.
• [PRECAUTIONS] is displayed every time the power is turned on if you exited the
slide show using a method other than selecting [END], such as turning off the
power while the slide show is playing.
• This can be also confirmed from [PRECAUTIONS] in the [SETUP] menu.
(ENG) VQT2M41
9
DMC-FT2&TS2EB-VQT2M41_eng.book
10 ページ
2010年1月29日 金曜日 午後7時59分
Maintenance and waterproof performance
∫ To prevent water leaking into the camera, observe the following
items before using it.
∫ Check that there is enough remaining battery power or memory in
the card.
∫ Do not open or close the card/battery door or terminal cover in
places with sand and dust, near water, or with wet hands.
∫ At purchase, the [LOCK] switch is in the locked state. When opening
the card/battery door and terminal cover, first release the lock.
• Release the lock by sliding the [LOCK] switch in the direction of the arrow until
the red area becomes visible, and open the card/battery door and terminal
cover.
A:
B:
C:
D:
[LOCK] switch (grey part)
Locked state
Red part
Released state
10 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
11 ページ
2010年1月29日 金曜日 午後7時59分
Confirm that there are no foreign objects on inner side of
the card/battery door or terminal cover (B rubber seal
and C place where rubber seal meets).
A: Terminal cover
B: Rubber seal
C: Area where rubber seal
sits
D: Card/Battery door
E: Hair and lint
F: Sand and dust
G: Crack and deformation
H: Fluid
• If there is any crack or deformation in the rubber seal inside the card/battery
door and terminal cover, get the camera inspected or repaired by the dealer or
an authorised Panasonic’s service centre.
If there is any foreign object, remove
with attached brush.
I: Brush (supplied)
• If there is any foreign object, such as lint, hair, sand, etc., on the
surrounding area, water will leak within a few seconds causing
malfunction.
(ENG) VQT2M41
11
DMC-FT2&TS2EB-VQT2M41_eng.book
12 ページ
2010年1月29日 金曜日 午後7時59分
Example of foreign object on the inner side of the card/battery door
J: Area where rubber seal
sits (around the card/
battery compartment)
K: Rubber seal site (around
the card/battery cover)
Example of foreign object on the inner side of the terminal cover
L: Area where rubber seal
sits (around the
connection terminal)
M: Rubber seal site (around
the terminal cover)
• Wipe it off with a dry soft cloth if there is any liquid.
• The integrity of the rubber seals may decrease after about 1 year, with use and
age. To avoid permanently damaging the camera the seals should be replaced
once each year. Please contact Panasonic’s Service Centre for related costs
and other information.
12 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
13 ページ
2010年1月29日 金曜日 午後7時59分
1:With the [LOCK] switch released, close the card/
battery door and terminal cover by pushing until you
hear a click.
• To prevent water seeping into the camera, be careful not to trap foreign
objects such as liquids, sand, hair or dust etc.
• Closing the door with the [LOCK] switch in the locked state may result in
damage or leaks.
2:Slide the [LOCK] switch in the direction of the arrow
until the visible red portion is no longer visible and the
switch is locked.
• If you use the camera without securely closing the door and cover, it may
open and close of its own accord.
N: Red part
O: [LOCK] switch (grey part)
P: Released state
Q: Locked state
Note
• If there is any foreign object, remove it
with attached brush.
• Sand and dust etc. will unintentionally
adhere to the camera by lodging in
between the gap around the card/
battery door or terminal cover when
used in the following locations:
– Where sand is floating, such as in the
sea or water etc.
– Where there is a lot of sand or dust,
such as at the beach or in a sand box
etc.
• To prevent unintentional opening of the card/battery door and terminal
cover, it is recommended to use the supplied silicon jacket.
(ENG) VQT2M41
13
VQT2M41~Body1_eng.fm 14 ページ
2010年1月30日 土曜日 午後5時11分
Using the camera underwater
• Use the camera underwater up to 10 m (33 feet) depth, water temperature from
0 oC to 40 oC (32 oF to 104 oF), and not longer than 60 minutes continuously.
• If there is a water or dirt on the camera, use it after wiping it off with a dry soft
cloth and dried at well ventilated area.
• Do not open or close the card/battery door or terminal cover.
• Do not apply shock to the camera underwater. (Waterproof performance may not
be maintained, and there is a chance of water leak.)
• Do not dive into the water holding the camera. Do not use the camera at the
location where the water will splash strongly, such as rapid flow or waterfall.
(Strong water pressure may be applied, and it may cause malfunction.)
• The camera will sink in the water. Take care not to drop the camera and lose it
underwater by securely placing the hand strap around your wrist or similar
measure.
• Do not use it in the hot water over 40 oC (104 oF) (in the bath or hot spring).
• When the camera is splashed with detergent, soap, hot spring, bath additive,
sun oil, sun screen, chemical, etc., wipe it off immediately.
• Card and battery are not waterproof. Do not handle with a wet hand. Also, do not
insert wet card or battery into the camera.
14 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
15 ページ
2010年1月29日 金曜日 午後7時59分
Causes of water leak
• When the camera is used in the following conditions, a gap may occur between
the camera and the card/battery door or terminal cover, causing water to leak
and malfunction.
– When there are foreign objects, such as lint, hair, sand, etc., between the card/
battery door or terminal cover and the camera.
– When the rubber seal has deteriorated.
– When the [LOCK] switch is not closed on the card/battery door and terminal
cover.
A: Water will leak through
the gap formed.
B: water
C: Terminal cover
D: Card/Battery door
E: Hair and lint
F: Sand and dust
G: Crack and deformation
H: Fluid
(ENG) VQT2M41
15
DMC-FT2&TS2EB-VQT2M41_eng.book
16 ページ
2010年1月29日 金曜日 午後7時59分
Caring of the camera after using it underwater
1
2
3
4
With the card/battery door and
terminal cover closed, rinse with
water, or if it was used in the sea,
soak the unit in fresh water pooled
in a shallow container for
10 minutes or less.
• If you have attached the silicon jacket,
be sure to rinse the camera after
removing it.
• Leaving the camera with foreign objects or saline matter on it may cause
damage, discolouration, corrosion, unusual odour, or deterioration.
Wipe off the water, and dry the
camera by standing it on a dry
cloth in a well ventilated shaded
area.
Confirm there is no water on the
camera, and open the card/battery
door and terminal cover.
Wipe off any water or sand inside
the card/battery door and terminal cover with a soft dry cloth.
16 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
17 ページ
2010年1月29日 金曜日 午後7時59分
∫ This unit incorporates drain design
This unit incorporates drain design, draining
water in gaps in the camera [OFF/ON] button
and zoom lever etc. As a result of this, bubbles
may come out when you soak the unit in water,
but it is not a malfunction.
• Example of water droplets around card/battery slot.
A: Water droplet
B: Battery
C: Card
• Water droplets may attach to the card or the battery when the card/battery door
is opened without fully drying the camera after it is used underwater or soaked in
fresh water. Be sure to wipe off the water with a soft dry cloth in such cases.
• Do not open or close the card/battery door and terminal cover with droplets of
water still on the camera. The water droplets may seep into the camera, causing
condensation or failure.
Note
• Wipe off the water and dirt on the camera with a dry soft cloth.
• Do not leave the camera uncared for more than 60 minutes after using it
underwater. It may cause deterioration of the waterproof performance.
• After use at the seaside or under water, make sure that the card/battery door
and terminal cover are firmly closed and soak the unit in fresh water pooled in a
shallow container for 10 minutes or less.
• If the zoom lever, mode dial, or camera [OFF/ON] button do not move smoothly,
it may be caused by an adhesion of foreign objects. Using in such a state may
cause malfunctions, such as locking up, so wash off any foreign objects by
shaking the camera in fresh water. Confirm that the zoom lever, mode dial, and
camera [OFF/ON] button move smoothly after cleaning.
• After soaking or washing the unit, wipe off water drops with a dry soft cloth and
dry the unit in a shaded area which is well ventilated.
• Make sure that water is completely drained from the unit after soaking in water
by standing the unit on a dry cloth for a while.
• Do not dry the camera with hot air from dryer or similar. Waterproof performance
will deteriorate due to deformation.
• Do not use chemicals such as benzine, thinner, alcohol, or cleanser, or soap or
detergents.
(ENG) VQT2M41
17
DMC-FT2&TS2EB-VQT2M41_eng.book
18 ページ
2010年1月29日 金曜日 午後7時59分
Accessories
Check that all the accessories are included before using the camera.
Product numbers correct as of January 2010. These may be subject to
change.
1
2
3
4
5
6
Battery Pack
(Indicated as battery pack or
battery in the text)
Charge the battery before use.
Battery Charger
(Indicated as battery charger or
charger in the text)
AC Mains Lead
USB Connection Cable
AV Cable
CD-ROM
• Software:
Use it to install the software to your
PC.
• Operating Instructions
7 Brush
8 Silicon Jacket
9 Hand Strap
10 Battery Case
• Supplied accessories are not waterproof
1
2
DMW-BCF10E
3
DE-A60A
4
K2CT39A00002
K1HA14AD0003
6
5
K1HA14CD0004
VFF0594
8
7
(excluding hand strap/silicon jacket).
• Keep the Brush out of reach of children
to prevent swallowing.
VFC4364/
VFC4537
• The charger is stored inside the silicon
jacket.
• SD Memory Card, SDHC Memory Card
and SDXC Memory Card are indicated
as card in the text.
• The card is optional.
You can record or play back pictures
on the built-in memory when you are
not using a card.
• Consult the dealer or your nearest
Service Centre if you lose the supplied
accessories. (You can purchase the
accessories separately.)
18 VQT2M41 (ENG)
9
VMG1932
10
VFC4393
VGQ0D56
VQT2M41~Body1_eng.fm 19 ページ
2010年2月3日 水曜日 午後3時45分
Sales and Support Information
Customer Care Centre
• For customers within the UK: 0844 844 3852
• For customers within the Republic of Ireland: 01 289 8333
• Visit our website for product information
www.panasonic.co.uk
• E-mail: customer.care@panasonic.co.uk
Technical Support for AV Software
• For customers within the UK: 0844 844 3869
• For customers within the Republic of Ireland: 01 289 8333
Direct Sales at Panasonic UK
• For customers: 0844 844 3856
• Order accessory and consumable items for your product with ease and confidence
by phoning our Customer Care Centre Monday – Thursday 9.00 a.m. – 5.30 p.m.,
Friday 9.30 a.m. – 5.30 p.m. (Excluding public holidays)
• Or go on line through our Internet Accessory ordering application at
www.pas-europe.com.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided directly by
Panasonic UK Ltd.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping for a wide range of finished
products, take a browse on our website for further details.
∫ Optional Accessories
• Battery Pack
• AC Adaptor
DMW-BCF10E
DMW-AC5EB
• HDMI mini cable:
• Multi conversion adaptor¢
RP-CDHM15/RP-CDHM30
DMW-MCA1E
• Semi Hard Case
DMW-CHTZ3E
• Marine Case
DMW-MCFT2E
• SDXC Memory Card
64 GB: RP-SDW64GE1K
48 GB: RP-SDW48GE1K
• SDHC Memory Card
32 GB: RP-SDW32GE1K/RP-SDP32GE1K
24 GB: RP-SDP24GE1K
16 GB: RP-SDW16GE1K/RP-SDP16GE1K
8 GB: RP-SDW08GE1K/RP-SDP08GE1K/RP-SDR08GE1A
4 GB: RP-SDW04GE1K/RP-SDP04GE1K/RP-SDR04GE1A
• SD Memory Card
2 GB: RP-SDP02GE1K/RP-SDR02GE1A
¢ Ensure that only the AC adaptor and multi conversion adaptor for this
camera are used. Using any other equipment may cause damage.
Some optional accessories may not be available in some countries.
(ENG) VQT2M41
19
DMC-FT2&TS2EB-VQT2M41_eng.book
20 ページ
2010年1月29日 金曜日 午後7時59分
Names of the Components
1
2
3
Flash
Self-timer indicator/
AF assist lamp/LED light
Lens
4
5
6
7
8
9
10
LCD monitor
Motion picture button
[MENU/SET] button
[DISPLAY] button
[Q.MENU]/Delete button
Playback button
Mode dial
1
4
5
2
3
11
10
9
6
78
11 Cursor buttons
A: 3/Exposure compensation/Auto
bracket/White balance fine
adjustment
B: 4/Macro mode/
AF Tracking
C: 2/Self-timer button
D: 1/Flash setting button
In these operating instructions, the cursor buttons are described as
shown in the figure below or described with 3/4/2/1.
e.g.: When you press the 4 (down) button
or
20 VQT2M41 (ENG)
Press 4
DMC-FT2&TS2EB-VQT2M41_eng.book
21 ページ
2010年1月29日 金曜日 午後7時59分
12 Speaker
13 Microphone
14 Zoom lever
12 13 14
e.g.: To make subjects appear closer
use (Tele)
Place your finger on the zoom lever,
and press [T] of the zoom lever
15 16
15 Camera [OFF/ON] button
16 Shutter button
17 Hand strap eyelet
• Be sure to attach the hand strap when
using the camera to ensure that you will
not drop it.
17
18
19
18 [HDMI] socket
19 [AV/DIGITAL/MULTI] socket
• When using an AC adaptor, ensure that
the Panasonic multi conversion adaptor
(DMW-MCA1; optional) and AC adaptor
(DMW-AC5E; optional) are used.
20 Tripod receptacle
• When you use a tripod, make sure the
20
21
tripod is stable when the camera is
attached to it.
21 Card/Battery door
22 Release lever
23 [LOCK] switch
22 23
(ENG) VQT2M41
21
DMC-FT2&TS2EB-VQT2M41_eng.book
22 ページ
2010年1月29日 金曜日 午後7時59分
Charging the Battery
∫ About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCF10E.
It has been found that counterfeit battery packs which look very similar
to the genuine product are made available to purchase in some
markets. Some of these battery packs are not adequately protected with
internal protection to meet the requirements of appropriate safety
standards. There is a possibility that these battery packs may lead to
fire or explosion. Please be advised that we are not liable for any
accident or failure occurring as a result of use of a counterfeit battery
pack. To ensure that safe products are used we would recommend that
a genuine Panasonic battery pack is used.
• Use the dedicated charger and battery.
• The camera has a function for distinguishing batteries which can be used
safely. The dedicated battery (DMW-BCF10E) supports this function. The
only batteries suitable for use with this unit are genuine Panasonic
products and batteries manufactured by other companies and certified by
Panasonic. (Batteries which do not support this function cannot be used).
Panasonic cannot in any way guarantee the quality, performance or safety
of batteries which have been manufactured by other companies and are
not genuine Panasonic products.
∫ Charging
• The battery is not charged when the camera is shipped. Charge the battery
before use.
• Charge the battery with the charger indoors.
• It is recommended to charge the battery in a temperature between 10 oC to
35 oC (50 oF to 95 oF). (The battery temperature should also be the same.)
Attach the battery paying
attention to the direction of the
battery.
Connect the AC mains lead.
• Disconnect the charger from the
electrical socket and detach the battery
after charging is completed.
22 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
23 ページ
2010年1月29日 金曜日 午後7時59分
∫ About the [CHARGE] indicator
The [CHARGE]
indicator turns on:
The [CHARGE]
indicator turns off:
The [CHARGE] indicator A is turned on and
charging will start.
The [CHARGE] indicator A of the charger will turn
off once the charging has completed without any
problem.
• When the [CHARGE] indicator flashes
– The battery temperature is too high or too low. It is recommended to charge
the battery again in an ambient temperature of between 10 ºC to 35 ºC (50 oF
to 95 oF).
– The terminals of the charger or the battery are dirty. In this case, wipe off the
dirt with a dry cloth.
∫ Charging time
Charging time
Approx. 130 min
∫ Approximate operating time and number of recordable pictures
Number of recordable pictures
Approx. 360 pictures
Recording time
Approx. 180 min
Playback time
Approx. 300 min
Recording conditions by CIPA standard
• CIPA is an abbreviation of [Camera & Imaging Products Association].
• Normal Picture Mode
• Temperature: 23 oC (73.4 oF)/Humidity: 50% when LCD monitor is on.
• Using a Panasonic SD Memory Card (32 MB).
• Using the supplied battery.
• Starting recording 30 seconds after the camera is turned on. (When the Optical
Image Stabilizer function is set to [AUTO].)
• Recording once every 30 seconds with full flash every second recording.
• Changing the zoom magnification from Tele to Wide or vice versa in every
recording.
• Turning the camera off every 10 recordings and leaving it until the temperature
of the battery decreases.
(ENG) VQT2M41
23
DMC-FT2&TS2EB-VQT2M41_eng.book
24 ページ
2010年1月29日 金曜日 午後7時59分
About the Built-in Memory/the Card
Built-in Memory
• Memory size: Approx. 40 MB
• The built-in memory can be used as a temporary storage device when the card
being used becomes full.
• The access time for the built-in memory may be longer than the access time for
a card.
Card
The following cards which conform to the SD video standard can be used
with this unit.
(These cards are indicated as card in the text.)
Type of card which can be used with
this unit
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB)
SDXC Memory Card (48 GB to 64 GB)
Remarks
• SDHC Memory Cards and SDXC
Memory Cards can be used only in
equipment that is compatible with
their respective formats.
• Check that the PC and other
equipment are compatible when
using the SDXC Memory Cards.
http://panasonic.net/avc/sdcard/
information/SDXC.html
• Only cards bearing the SDHC logo (indicating that the card conforms to SD
video standards) may be used as 4 GB to 32 GB cards.
• Only cards bearing the SDXC logo (indicating that the card conforms to SD
video standards) may be used as 48 GB to 64 GB cards.
• Use a card with SD Speed Class¢ with “Class 4” or higher when recording
motion pictures in [AVCHD Lite]. Also, use a card with SD Speed Class with
“Class 6” or higher when recording motion pictures in [MOTION JPEG].
¢ SD Speed Class is the speed standard regarding continuous writing.
• Please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Note
• Keep the Memory Card out of reach of children to prevent swallowing.
24 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
25 ページ
2010年1月29日 金曜日 午後7時59分
Inserting and Removing the Card
(optional)/the Battery
• Check that this unit is turned off.
• Confirm that there is no foreign object.
• We recommend using a Panasonic card.
1:Slide the [LOCK] switch B, and
release the lock.
2:Slide the release lever A and
open the card/battery door.
• Always use genuine Panasonic batteries
(DMW-BCF10E).
• If you use other batteries, we cannot
guarantee the quality of this product.
Battery: Insert until it is locked by
the lever C being careful about the
direction you insert it. Pull the
lever C in the direction of the
arrow to remove the battery.
Card: Push it fully until it clicks
being careful about the direction
you insert it. To remove the card,
push the card until it clicks, then
pull the card out upright.
D: Do not touch the connection terminals of the card.
• The card may be damaged if it is not fully inserted.
Close the card/battery door until it
clicks, and then lock the [LOCK]
switch by sliding it toward [2].
(ENG) VQT2M41
25
DMC-FT2&TS2EB-VQT2M41_eng.book
26 ページ
2010年1月29日 金曜日 午後7時59分
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
Press the [OFF/ON] button.
A [MENU/SET] button
B Cursor buttons
• [PRECAUTIONS] is displayed. Be sure to check this so that you can
maintain the waterproof performance. (P9)
Press [MENU/SET].
Press 2/1 to select the items (year,
month, day, hour, minute, display
sequence or time display format),
and press 3/4 to set.
‚: Cancel without setting the clock.
Press [MENU/SET] to set.
Press [MENU/SET].
• Press [‚] to return to the settings screen.
Changing the clock setting
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1.
• It can be changed in steps 3, 4 and 5 to set the clock.
26 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
27 ページ
2010年1月29日 金曜日 午後7時59分
Setting the Menu
This section describes how to select the Normal Picture Mode settings, and
the same setting can be used for the [PLAYBACK] menu and [SETUP] menu
as well.
Example: Setting [AF MODE] from [Ø] to [š] in the Normal Picture Mode
Press [MENU/SET] to display the menu.
Press 3/4 to select [AF MODE], and then
press 1.
• Depending on the item, its setting may not appear or it
may be displayed in a different way.
Press 3/4 to select [š] and then press
[MENU/SET] to set.
Press [MENU/SET] to close the menu.
Switching to other menus
e.g.: Switching to the [SETUP] menu
1 Press [MENU/SET] to display the menu.
2 Press 2.
3
Press 4 to select the [SETUP] menu icon
[ ].
4
Press 1.
• Select a menu item next and set it.
(ENG) VQT2M41
27
DMC-FT2&TS2EB-VQT2M41_eng.book
28 ページ
2010年1月29日 金曜日 午後7時59分
Mode switching
Selecting the [REC] Mode
Press the [OFF/ON] button.
Switching the mode by rotating the
mode dial.
A Mode dial
∫ List of [REC] modes
¦
Intelligent Auto Mode
The subjects are recorded using settings automatically selected by the
camera.
!
Normal Picture Mode
The subjects are recorded using your own settings.
Sports mode
Use this mode to take pictures of sporting events, etc.
Snow mode
This allows you to take pictures that show the snow as white as possible
at a ski resort or a snow-covered mountain.
Beach & Surf mode
This mode is optimal for taking pictures up to 3 m (10 feet) underwater
and at the beach.
Û
Scene Mode
This allows you to take pictures that match the scene being recorded.
ì
Clipboard Mode
Record as a memo.
28 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
29 ページ
2010年1月29日 金曜日 午後7時59分
[REC] Mode: ñ
Taking pictures using the automatic
function
(ñ: Intelligent Auto Mode)
The camera will set the most appropriate settings to match the subject and
the recording conditions so we recommend this mode for beginners or those
who want to leave the settings to the camera and take pictures easily.
Set the mode dial to [ñ].
Press the shutter button halfway to
focus.
1
• The focus indication 1 (green) lights when
the subject is focused.
• The AF area 2 is displayed around the
subject’s face by the face detection function.
In other cases, it is displayed at the point on
the subject which is in focus.
• The focus range is 5 cm (0.17 feet) (Wide)/
30 cm (0.99 feet) (Tele) to ¶.
2
Press the shutter button fully (push
it in further), and take the picture.
(ENG) VQT2M41
29
DMC-FT2&TS2EB-VQT2M41_eng.book
30 ページ
2010年1月29日 金曜日 午後7時59分
Scene detection
When the camera identifies the optimum scene, the icon of the scene
concerned is displayed in blue for 2 seconds, after which its colour changes
to the usual red.
¦ >
[i-PORTRAIT]
[i-SCENERY]
[i-MACRO]
[i-NIGHT PORTRAIT]
• Only when [
] is selected
[i-NIGHT SCENERY]
[i-SUNSET]
[i-BABY]
• [¦] is set if none of the scenes are applicable, and the standard settings are
set.
• When [
], [ ] or [ ] is selected, the camera automatically detects a person’s
face, and it will adjust the focus and exposure. (Face Detection)
AF Tracking Function
It is possible to set the focus to the specified subject. Focus will keep
following the subject automatically even if it moves.
1
Press 3.
• [ ] is displayed in the upper left of the screen.
• AF Tracking frame is displayed in the centre of
the screen.
• Press 3 again to cancel.
2
Bring the subject to the AF tracking frame,
and press 4 to lock the subject.
• AF tracking frame will turn yellow.
• An optimum scene for the specified subject will
be chosen.
• Press 3 to cancel.
30 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
[REC] Mode: ñ·
31 ページ
2010年1月29日 金曜日 午後7時59分
¿
Recording Motion Picture
This can record high definition motion pictures compatible with the AVCHD
format or motion pictures recorded in Motion JPEG.
Audio will be recorded in monaural.
Select the mode.
A Mode dial
B Motion picture button
A
Start recording by pressing the
motion picture button.
A Available recording time
B Elapsed recording time
• Release the motion picture button right after
you press it.
• The recording state indicator (red) C will
flash while recording motion pictures.
C
B
Stop the recording by pressing the motion picture button
again.
• If the built-in memory or the card becomes full in the middle of recording,
the camera stops recording automatically.
Note
• Motion pictures can be recorded continuously for up to 29 minutes 59 seconds.
Also, motion picture recorded continuously in [MOTION JPEG] is up to 2 GB.
(Example: [8m 20s] with [
]) Remaining time for continuous recording is
displayed on the screen.
(ENG) VQT2M41
31
DMC-FT2&TS2EB-VQT2M41_eng.book
32 ページ
2010年1月29日 金曜日 午後7時59分
[PLAYBACK] Mode: ¸
Playing back Pictures ([NORMAL PLAY])
Press [(].
A [(] button
• Normal playback is displayed automatically
when the power is turned on by pressing and
holding the [(] button.
Press 2/1 to select the picture.
• After selecting the motion picture, press 3 to
start playback.
32 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
33 ページ
2010年1月29日 金曜日 午後7時59分
[PLAYBACK] Mode: ¸
Deleting Pictures
Once deleted, pictures cannot be recovered.
• Pictures on the built-in memory or the card, that are being played back will be
deleted.
Select the picture to be deleted, and
then press [‚].
A [‚] button
Press 2 to select [YES] and then
press [MENU/SET].
(ENG) VQT2M41
33
DMC-FT2&TS2EB-VQT2M41_eng.book
34 ページ
2010年1月29日 金曜日 午後7時59分
Reading the Operating Instructions
(PDF format)
• You have practised the basic operations introduced in these operating
instructions and want to progress to advanced operations.
• You want to check the Troubleshooting.
In these kinds of situations refer to Operating Instructions (PDF format) recorded
on the CD-ROM containing the Operating Instructions (supplied).
∫ For Windows
Turn the PC on and insert the CD-ROM containing the
Operating Instructions (supplied).
Click the [Operating
Instructions].
Select the desired language
and then click [Operating
Instructions] to install.
A To return to the install menu.
Double click the “Operating
Instructions” shortcut icon on
the desktop.
34 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
35 ページ
2010年1月29日 金曜日 午後7時59分
∫ When the Operating Instructions (PDF format) will not open
You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to
browse or print the Operating Instructions (PDF format).
Insert the CD-ROM containing the Operating Instructions (supplied), click B and
then follow the messages on the screen to install.
(Compatible OS: Windows 2000 SP4/Windows XP SP2 or SP3/Windows Vista
SP1 or SP2/Windows 7)
• You can download and install a version of Adobe Reader that you can use with
your OS from the following Web Site.
http://get.adobe.com/reader/otherversions
∫ To uninstall the Operating Instructions (PDF format)
Delete the PDF file from the “Program Files\Panasonic\Lumix\” folder.
• When the contents in the Program Files folder cannot be displayed, click the
[Show the contents of this folder] to display them.
∫ For Macintosh
Turn the PC on and insert the CD-ROM containing the
Operating Instructions (supplied).
Open the “Manual” folder in the CD-ROM and then copy
the PDF file with the desired language inside the folder.
Double click the PDF file to open it.
(ENG) VQT2M41
35
DMC-FT2&TS2EB-VQT2M41_eng.book
36 ページ
2010年1月29日 金曜日 午後7時59分
Specifications
Digital Camera:
Power Source:
Power
Consumption:
Camera effective
pixels:
Image sensor:
Information for your safety
DC 5.1 V
1.2 W (When recording)
0.7 W (When playing back)
14,100,000 pixels
1/2.33q CCD, total pixel number 14,500,000 pixels,
Primary colour filter
Lens:
Optical 4.6kzoom, fl4.9 mm to 22.8 mm (35 mm film
camera equivalent: 28 mm to 128 mm)/F3.3 to F5.9
Digital zoom:
Max. 4k
Extra optical zoom: Max. 9.8k
Normal: 30 cm (0.99 feet) to ¶
Focus range:
Macro/Intelligent auto/Clipboard mode:
5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to ¶
Scene mode: There may be differences in the above
settings.
Electronic shutteriMechanical shutter
Shutter system:
Burst recording
Burst speed:
Approx. 1.8 pictures/second
Number of
recordable
pictures:
Max. 5 pictures (Standard), max. 3 pictures (Fine).
36 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
Hi-speed burst
Burst speed:
Number of
recordable
pictures:
Shutter speed:
Exposure (AE):
Metering mode:
LCD monitor:
Flash:
Microphone:
Speaker:
Recording media:
Recording file
format
Still Picture:
Pictures with
audio:
Motion pictures
with audio:
37 ページ
2010年1月29日 金曜日 午後7時59分
Approx. 10 pictures/second (Speed priority)
Approx. 5 pictures/second (Image priority)
[3M (4:3), 2.5M (3:2) or 2M (16:9) is selected as the
picture size.]
When using the built-in memory:
Approx. 15 pictures (immediately after formatting)
When using a Card: Max. 100 pictures (differs
depending on the type of Card and the recording
conditions)
8 seconds to 1/1300th of a second
[STARRY SKY] mode: 15 seconds, 30 seconds,
60 seconds
Programme AE
Exposure compensation (1/3 EV Step, j2 EV to
i2 EV)
Multiple
2.7q TFT LCD
(Approx. 230,000 dots) (field of view ratio about 100%)
Flash range: [ISO AUTO]
Approx. 30 cm (0.99 feet) to 5.1 m (16.7 feet) (Wide)
Monaural
Monaural
Built-in Memory (Approx. 40 MB)/SD Memory Card/
SDHC Memory Card/SDXC Memory Card
JPEG (based on “Design rule for Camera File system”,
based on “Exif 2.21” standard)/DPOF corresponding
JPEG (based on “Design rule for Camera File system”,
based on “Exif 2.21” standard)r“QuickTime”
AVCHD Lite/QuickTime Motion JPEG
(ENG) VQT2M41
37
DMC-FT2&TS2EB-VQT2M41_eng.book
Interface
Digital:
38 ページ
2010年1月29日 金曜日 午後7時59分
“USB 2.0” (High Speed)
¢ Data from the PC can not be written to the camera
using the USB connection cable.
Analogue video/
audio:
Terminal
[AV/DIGITAL/
MULTI]:
[HDMI]:
Dimensions:
Mass:
Operating
temperature:
NTSC/PAL Composite (Switched by menu),
Audio line output (monaural)
Dedicated jack (14 pin)
MiniHDMI TypeC
Approx. 99.3 mm (W)k63.1 mm (H)k24.3 mm (D)
[3.91q (W)k2.48q(H)k0.96q (D)]
(excluding the projecting parts)
Approx. 188 g/0.41 lb (with card and battery)
Approx. 167 g/0.37 lb (excluding card and battery)
j10 oC¢ to 40 oC (24 oF¢ to 104 oF)
¢ The performance of the battery (number of recordable
pictures/operating time) may decrease temporarily
when using the camera in a temperature between
j10 oC to 0 oC (24 oF to 32 oF) (at the cold climate
such as ski resorts).
Operating humidity: 10% to 80%
Waterproof
performance:
Equivalent to IEC 60529 “IPX8”.
(Usable for 60 minutes in 10 m (33 feet) water depth)
Crash resistance
perfomance:
The camera has cleared a single unit drop test from a
height of 2 m (6.6 feet) onto 3 cm (0.10 feet) plywood,
which is compliant with “MIL-STD 810F Method
516.5-Shock”.
Dustproof
performance:
Equivalent to IEC 60529 “IP6X”.
38 VQT2M41 (ENG)
DMC-FT2&TS2EB-VQT2M41_eng.book
39 ページ
2010年1月29日 金曜日 午後7時59分
Battery Charger
(Panasonic
DE-A60A):
Information for your safety
Input:
110 V to 240 V
Output:
4.2 V
Operating
temperature:
50/60 Hz, 0.2 A
0.65 A (Battery charging)
0 oC¢ to 40 oC (32 oF¢ to 104 oF)
¢ The battery cannot be recharged in a temperature
less than 0 oC (32 oF). (The [CHARGE] indicator
blinks when the battery cannot be recharged.)
Battery Pack
(lithium-ion)
(Panasonic
DMW-BCF10E):
Information for your safety
Voltage/capacity:
3.6 V/940 mAh
(ENG) VQT2M41
39
VQT2M41~BCover_eng.fm
40 ページ 2010年2月2日 火曜日 午前10時5分
• SDXC Logo is a trademark of SD-3C, LLC.
• The “AVCHD”, “AVCHD Lite” and the “AVCHD”, “AVCHD Lite” logo are
trademarks of Panasonic Corporation and Sony Corporation.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
• HDMI, the HDMI Logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
• HDAVI Control™ is a trademark of Panasonic Corporation.
• QuickTime and the QuickTime logo are trademarks or registered trademarks
of Apple Inc., used under license therefrom.
• Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
• Other names, company names, and product names printed in these instructions
are trademarks or registered trademarks of the companies concerned.
This product is licensed under the AVC patent portfolio license for the personal
and non-commercial use of a consumer to (i) encode video in compliance with
the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was
encoded by a consumer engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed to provide AVC Video. No
license is granted or shall be implied for any other use. Additional information
may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
EU
Panasonic Corporation
Web Site: http://panasonic.net
B
VQT2M41
F0210KD0 ( 2000 )
C
Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
 Panasonic Corporation 2010
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising