www.jbctools.com English Compact Desoldering Station with Electric Pump Ref. CS-D w w w.jbctools.com Packing List The following items should be included: CSV Control Unit ...................................... 1 unit Ref. CSV-1D (120V) CSV-2D (230V) CSV-9D (100V) Micro Desoldering Iron ........................ 1 unit Ref. DS360-A DS360-A Accessories ................. 1 unit Ref. 0010259 Power Cable .................. 1 unit Ref. 0009417 (100V/120V) 0009401 (230V) Tips (5 units) Ref. C360002 Tips (5 units) Ref. C360004 Filter (2 units) Ref. 0008473 Cleaning brush Ref. 0008297 Filter Box .........................1 unit Ref. 0005966 Cleaning Rods Ref. 0008466 Solder Collector (2 units) Ref. 0008467 Cotton Filters .................1 unit Ref. 0781046 It contains 50 filters Electric Desoldering Module .............. 1 unit Ref. MS-A Sponge ......................................................... 1 unit Ref. S0354 Suction Filter ................ 1 unit Ref. 0821830 Brass Wool ............................................... 1 unit Ref. CL6210 Module Cable ............... 1 unit Ref. 0010207 Manual ........................... 1 unit Ref. 0010207 w w w.jbctools.com Compact Desoldering Station with Electric Pump Ref. CS-D 2 3 w w w.jbctools.com Features Adjustable Stand Cable collector Adjustable Stand: Intelligent Heat Management Adjust the tool stand to suit your work position. Process Control Tip Cleaning System Cable collector Place the cable on the collector to keep the work area free of cable. Micro Desoldering Iron Ref. DS360-A USB-B Equipotential connection Main switch Fuse Power Socket Module Cable Ref. 0010207 Suction Filter Ref. 0821830 4 5 w w w.jbctools.com Tip Cleaning System USB Connector Select the option that best suits your tip cleaning needs. Download the latest software from our website to improve your soldering station. JBC Updater Splashguard www.jbctools.com/software.html Brass Wool Ref. CL6210 Very effective cleaning method. Leaves a small layer of solder on the tip preventing oxidation between cleaning and rewetting. Update the station software via USB connection: Cable USB AB JBC Updater More options for the splashguard (not supplied): Metal Brush Ref. CL6220 When used carefully, it provides a more thorough cleaning. Inox Wool Ref. CL6205 An alternative to Brass Wool. JBC Manager www.jbctools.com/manager.html Manage and monitor as many stations as your PC can handle by using the JBC Manager software. You can export data to other PCs. Tip Wipe Sponge Ref. S0354 The least harmful cleaning method. Keep the sponge damp with distilled water to prevent tip wear. any JBC station Cable USB AB Tapping: Wiping: USB Hub JBC Manager Tap gently to remove the excess solder. 6 Use the slots to wipe off any remaining particles. Manager Settings Change settings for a group of JBC stations at the same time. Register Settings Create graphs of the soldering process in real time with power and temperature data. 7 w w w.jbctools.com Operation Process Control The JBC Exclusive Heating System Work Screen Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user can work at a lower temperature and improve the quality of soldering. Tip temperature is further reduced thanks to the Sleep and Hibernation modes which increase tip life by 5. Fixed temp. 3 5 0 o C Levels ºC 2 7 0 3 5 0 4 0 0 2. Sleep 1. Work 3. Hibernation Shown when you fix a specific temp. Shown when you have selected temp. levels. Selected temp. 3 5 0 o C 350 0c This screen provides information of tool status in real time. Power 10% Long time in the stand When the tool is lifted from the stand the tip will heat up to the selected temperature. Selected temp. 3 5 0 o C 350 c 0 Power 10% When the tool is in the stand, the temperature falls to Sleep temperature (pre-set 260ºC / 500ºF). Sleep After long periods in the stand (pre-set 30 min), the power is cut and the tool cools down to room temperature. Menu Screen Main menu Pre-set PIN: 0105 Hibernation Tool in the stand Tool in the stand after sleep No heat A c t u a l T e m p . 2 6 0 oC A c t u a l T e m p . 2 0 oC Station settings 1 2 3 4 Change temperature (from 180 to 450ºC) Tool Settings: · Select temperature levels · Fix one temperature 8 Tool Settings: · Set Sleep temperature · Set Sleep delay (from 0 to 9 min or no Sleep) Tool Settings: · Set Hibernation delay (from 0 to 35 min or no hibernation) Temp unit Maximum temp Minimum temp Help text 5 Beep 6 Change PIN Back 1 2 3 Exit Reset settings Station settings Tool settings 4 5 Counters Program version Counters Tool settings Celsius 4000C 2000C OFF ON 1 Fix one temp ----2 Temp levels set OFF 3 Sleep delay 0 min 1 Plugged hours 2 Working hours 3 Sleep hours 0 0 0 4 5 6 7 0 0 0 0 Tool DS 4 Sleep temp 2600C 5 Hibernation delay 30 min 6 Temp adjust + o oC Back Tool DS Hibernation hours No tool hours Sleep cycles Desold cycles Back 9 w w w.jbctools.com Changing the Heating Element Changing the Tip 1. Remove the tip by using a flat-nosed pliers. Twist the tip and pull. 2. Insert the new tip and follow the same steps conversely. 1. Remove by pulling the filter and the solder collector. 2. Take out the fixing screw and withdraw the heating element. 3. Insert the new heating element by following the same steps conversely. Heating element Ref. DSV-DS Fixing screw Important: Change tips only when the tool is hot. Do not hold the tip on the spring clamp. Compatible tips The CS and CV desoldering stations work with C360 tip range. Check the model that best adapts to your desoldering needs in www.jbctools.com Aø Bø C360-001 C360-002 C360-003 ØA: 1 ØB: 0.8 Ømax.pin: 0.4 ØA: 1.2 ØB: 0.8 Ømax.pin: 0.6 ØA: 1.4 ØB: 1 Ømax.pin: 0.8 C360-004 C360-007 C360-006 ØA: 1.4 ØB: 1 Ømax.pin: 0.8 ØA: 1.9 ØB: 1.4 Ømax.pin: 1.2 ØA: 3 ØB: 1.5 Ømax.pin: 1.3 Tip selection Remember to select the biggest tip possible for your application: Ø inside tip > Ø Pin. Ø Inside tip Solder Collector Filter Ref. 0008473 Changing the Pump Filters Important: Do not open the Suction filter with sharp pointed objects to avoid damage. Suction filter Ref. 0821830 Cotton filters Ref. 0781046 O Ring Ref. 0007717 Filter cover Ref. 0004710 Ø Pin Spare filters Ref. 0005966 10 11 w w w.jbctools.com Maintenance Safety Before carrying out maintenance or storage, always allow the equipment to cool. - Clean the station screen with a glass cleaner or a damp cloth. Clean periodically - Use a damp cloth to clean the casing and the tool. Alcohol can also be used when cleaning the metal parts. - Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. - The power cord must be plugged into approved bases. Be sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire. - Periodically check that the metal parts of the tool/stand are clean so that the station can detect when the tool is in the stand. - Do not work on electrically live parts. Antistatic handle of soldering irons is electrically conductive. - Maintain tip surface clean and tinned prior to storage in order to avoid tip oxidation. Rusty and dirty surfaces reduce heat transfer to the solder joint. - Periodically check all cables, tubes and filters to ensure proper solder suction. It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - The tool should be placed in the stand when not in use in order to activate the sleep mode. The soldering tip, the metal part of the tool and the stand may still be hot even when the station is turned off. Handle with care, including when adjusting the stand position. - Do not leave the appliance unattended when it is on. - Do not cover the ventilation grills. Heat can cause inflamable products to ignite even when out of sight. - Replace a blown fuse as follows: - Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation. - Be careful with the fumes produced when soldering. - Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when working to avoid personal harm. - Utmost care must be taken with liquid tin waste which can cause burns. Remove the fuse by pulling the black cap. If necessary use a tool to lever it off. Press the new fuse into the holder and replace it in the station. - This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved. Children must not play with the appliance. Maintenance shall not be carried out by children unless supervised. - Replace any defective or damaged pieces. Use original JBC spare parts only. - Repairs should only be performed by a JBC authorized technical service. 12 13 w w w.jbctools.com Specifications Exploded View CS-1D 120V 50/60Hz. Input fuse: 2A. Output: 23,5V. CS-2D 230V 50/60Hz. Input fuse: 1A. Output: 23,5V. CS-9D 100V 50/60Hz. Input fuse: 2A. Output: 23,5V. - Weight: 2.8 Kg (6.2lb) - Dimensions: 150 x 175 x 145 mm - Temperature selection: 180-450°C (356-842°F) - Output Peak Power: 40W - Tip to ground resistance: <2 ohms - Ambient operating temp: 10-40 ºC / 50-104 ºF - USB connector station-PC MS-A - Weight: 1.2 Kg (2.6lb) - Dimensions: 145 x 55 x 225 mm - Vacuum: 75% / 570 mmHg / 22.4 inHg - Flow rate: 9 SLPM Comply with CE standards. ESD protected housing “skin effect”. 14 15 This product should not be thrown in the garbage. In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life must be collected and returned to an authorized recycling facility. www.jbctools.com 0014635-1014 Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear due to use or mis-use. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project