SUMMER 2012
SUMMER 2012
LOW POWER FM
BROADCAST ANTENNAS
™
This catalog represents the absolute latest, and most
diverse Multi-band Antennas available to the modern
Amateur Radio Operator. We’re confident you will find
our antennas and accessories will enable you to enjoy
Amateur Radio to its fullest.
COMET developed the Super Linear Converter (SLC)
to increase the actual gain of dual/tri-band antennas.
1) A completely pre-formed phasing coil and
phosphorous copper element eliminates additional
components, and gain loss. (Photo A)
2) C OMET sectional antennas use threaded ABS
(transparent to RF) connecting joints for the finest
radiation pattern and easiest assembly. (Photo B, C)
PHOTO B
PHOTO A
2
PHOTO C
3) The SLC is electrically very efficient, providing a
low angle of radiation directly to the horizon, for
maximum performance.
Fold-Over Feature
Most Comet antennas
over 29" length have
this feature built into the
antenna.
Shorter antennas: Pull
up on the element, the
hinge comes up out of
the socket and the hinge
is exposed.
Taller antennas:
A threaded collar locks the
hinge in place. Unscrew
the collar to expose the
hinge.
Use the fold-over to
enter garages, drive-thru
restaurants, etc. Do not
drive with the antenna
folded over.
F/O
Indicates
Fold-Over
Feature
CFM-95SL
88-108MHz Tunable
Antenna
Gain: 3.4dBi
Band-width: 4MHz
after tuning
VSWR: 1.5:1 or less
Max Power: 200 watts
Height: 5' 6" min
(88MHz)
7' 8" max (108MHz)
Weight: 2 lbs 7 oz
Connector: SO-239
CD-95Y
88-108MHz Directional Antenna
Gain: 7-8dBi
Elements: 6
Polarazation: V or H
F/B ratio: 15dB avg
-3dB E-Beamwidth: 60-70 deg
-3dB H-Beamwidth: 110-120 deg
VSWR: 1.5:1 or less
Max Power: 500 watts
Boom Length: 45"
Weight: 7 lbs 7 oz.
Mounting Mast Dia: 1.5 – 2"
Connector: N-Female
TRI-BAND BASE AND
REPEATER ANTENNAS
GP-15
144MHz
146MHz
220MHz
440MHz
446MHz
52MHz
Elevation Pattern GP-15
CX-333 Elevation Pattern
Tri-Band 52/146/446MHz
Gain & Wave:
52MHz 3.0dBi 5⁄8 wave
146MHz 6.2dBi
5⁄8 wave x 2
446MHz 8.6dBi
5⁄8 wave x 4
VSWR: 1.5:1 or less
Max Power: 150 watts
Length: 7' 11"
Weight: 3 lbs. 1 oz.
Connector: SO-239
Construction: Heavy-duty
fiberglass, single piece
6M Tuning Radial:
6M band-width is 2.5MHz
approx after tuning
CX-333
Tri-Band 146/220/446MHz
Gain & Wave:
146MHz 6.5dBi
5⁄8 wave x 2
223MHz 7.8dBi
5⁄8 wave x 3
446MHz 9.0dBi
5⁄8 wave x 5
VSWR: 1.5:1 or less
144.5-147.5MHz
222-225MHz
440-450MHz
Max Power: 120 watts
Length: 10' 4"
Weight: 3 lbs. 8 ozs.
Connector: SO-239
Construction: Heavy-duty
fiberglass, 2 sections
GP-98
Tri-Band 146/446/
1200MHz
Gain & Wave:
146MHz 6.5dBi
5⁄8 wave x 2
446MHz 9.0dBi
5⁄8 wave x 5
1200MHz 13.5dBi
5⁄8 wave x 12
VSWR: 1.5:1 or less
Max Power:
150W(100W 1.2GHz)
Length: 9' 8"
Weight: 3 lbs.
Connector: N-Type
Construction: Heavy-duty
fiberglass, 2 sections
GP-95
Tri-Band 146/446/
1200MHz
Gain and Wave:
146MHz 6.0dBi
5⁄8 wave x 2
4 46MHz 8.6dBi
5⁄8 wave x 4
1 200MHz 12.8dBi
5⁄8 wave x 9
VSWR: 1.5:1 or less
Max Power: 100W
FM/200W SSB
Length: 8'
Weight: 2 lbs. 10 ozs.
Connector: N-female
Construction: One-piece
white fiberglass
DUAL-BAND
BASE AND REPEATER ANTENNAS
GP-3
GP-6
GP-1
DualBand 146/446MHz
Gain:
146MHz 4.5dBi
446MHz 7.2dBi
VSWR: 1.5:1 or less
Max Power: 200 watts
Length: 5' 11"
Weight: 2 lbs. 12 oz.
Mounting Mast Diameter:
1½-2¼"
Connector: SO-239
Construction: One-piece
white fiberglass
DualBand 146/446MHz
Gain & Wave:
146MHz 6.5dBi 5⁄8 wave x 2
446MHz 9.0dBi 5⁄8 wave x 5
VSWR: 1.5:1 or less
Max Power: 200 watts
Length: 10' 2"
Weight: 3 lbs. 8 oz.
Connector: SO-239
Construction: Heavy-duty
fiberglass, 2 sections
Elevation Pattern GP-6
146MHz
446MHz
Dualband 146/446MHz
Gain and Wave:
146MHz 3.0dBi ½ wave x 2
4446MHz 6.0dBi 5⁄8 wave x 2
VSWR: 1.5:1 or less
Max Power: 200W
Length: 4' 2"
Weight: 2 lbs
Mounting Mast Diameter:
1¼" - 2½"
Connector: SO-239
Construction: One-piece white
fiberglass
Elevation Pattern GP-3
146MHz
446MHz
V.S.W.R. Characteristics:
146 MHz
1.5
1.4
1.3
1.2
1.1
144
146
148
446 MHz
3
1.5
1.4
1.3
1.2
1.1
442
445
450
GP-3 being used on a
recent Mt. Cho Oyu/
Mt. Everest Expedition
DISCONE ANTENNA
DS-150S
Extremely wideband
Scanner/Receive
antenna.
Includes 65 feet of
RG-58A/U coax with
PL-259 connectors
installed.
RX: 25-1300MHz
TX: 6M / 2M / 440 / 900 /
1200MHz
Length: 4' 8"
Max Power: 100 watts
Weight: 3lbs. 3oz.
(without coax)
Connector: SO-239
GP-9
COMET’S best selling 2M/70cm
Fixed-Station Antenna.
Featuring the COMET exclusive SLC System for maximum
gain, and stable resonant frequencies. Wide band, and
like all COMET Antennas, pre-tuned. Heavy-duty fiberglass
and a compression washer within the ABS connecting joint
prevents moisture­/pollution contamination. Simply use the
included stainless steel mounting brackets and your mast,
and you’re ready to experience incredible COMET DualBand
performance­!
GP-9 (with SO-239 Conn)
GP-9N (with N-Conn)
Elevation Pattern GP-9
DualBand 146/446MHz
Gain & Wave:
146MHz 8.5dBi 5⁄8 wave x 3
446MHz 11.9dBi 5⁄8 wave x 8
VSWR: 1.5:1 or less
Max Power: 200 watts
Length: 16' 9"
Weight: 5 lbs. 11 oz.
Mounting to Mast Size: 1 ¼-2 ½"
Connector: SO-239 or Female N-type
Construction: Heavy-duty fiberglass, 3 sections
146MHz
446MHz
DUAL-BAND MOBILE ANTENNAS
RUBBER
COATED
ELEMENT
COMET SUPER BEAM
COMET’S NEWEST MOBILE ANTENNAS!
HEAVY-DUTY, BROAD-BAND, HIGH-POWER!
CSB-790A
4
Dualband 146/446MHz
Gain & Wave:
F/O
1 46MHz : 5.1dBi
7⁄8 wave center load x 2
4 46MHz: 7.7dBi
5⁄8 wave x 3
VSWR: 1.5:1 or less
Max Power: 150W
Length: 62"
Connector: Gold Plated
PL-259
CSB-770A
Dualband 146/446MHz
Gain & Wave:
F/O
1 46MHz: 4.4dBi
5⁄8 wave, center load x 2
446MHz: 6.9dBi
5⁄8 wave x 2, center load
VSWR: 1.5:1 or less
Max Power: 150W
Length: 51"
Connector: Gold Plated
PL-259
CSB-750A
Dualband 146/446MHz
Gain & Wave:
F/O
1 46MHz: 3.6dBi
½ wave center load
446MHz: 6.1dBi
5⁄8wave x 2, center load
VSWR: 1.5:1 or less
Max Power: 150W
Length: 42"
Connector: Gold Plated
PL-259
SBB-7 / SBB-7NMO
DualBand 146/446MHz
F/O
Gain & Wave:
6
146MHz 4.5dBi ⁄8 wave
center-load
446MHz 7.2dBi
5⁄8 wave x 3
VSWR: 1.5:1 or less
Max Power: 70W FM
Length: 55"
Connector: Gold-Plated
PL-259 or NMO Style
M-24M (w/PL-259)
M-24B (w/BNC)
M-24S ( w/SMA)
*M-24SJ (w/SMA-female)
Need a durable antenna to resist damage from brushes
with tree branches, garage doors, etc…? The SS Series
antennas were designed with you in mind! A spring in the
base and spring steel element allows the antenna to flex
rather than break for increased impact survival.
SS-460SB
SS-460SBNMO
Dualband 146/446MHz
spring antenna
Gain & Wave:
146MHz 1.5dBi
¼ wave
446Mhz 4.15dBi
½ wave
VSWR: 1.5:1 or less
Max Power: 60W
Length: 18”
Connector: Gold-plated
PL-259 or NMO
SS-680SB
SS-680SBNMO
Dualband 146/446MHz
spring antenna
Gain & Wave:
146MHz 2.15dBi
½ wave
446Mhz 5.0dBi
5⁄8 wave
VSWR: 1.5:1 or less
Max Power: 80W
Length: 27”
Connector: Gold-plated
PL-259 or NMO
Fits directly to HTs using an
SMA-male connector
146/446 MHz DualBand
Mag-Mount Antenna
Gain & Wave:
146MHz 1.7dBi 3⁄8 wave
446MHz 4.1dBi 1⁄4 +
5⁄8 wave
VSWR: 1.5:1 or less
Max Power: 80 watts
Length: 19.5"
Coax: RG-58A/U, 12'
*Coax attaches directly to HT’s
with an SMA-male connector
SBB-5 / SBB-5NMO
DualBand 146/446MHz
F/O
Gain & Wave:
1
146MHz 3.0dBi ⁄2 wave
446MHz 5.5dBi
5⁄8 wave x 2
VSWR: 1.5:1 or less
Max Power: 120W FM
Length: 38"
Connector: Gold-Plated
PL-259 or NMO Style
SBB-1 / SBB-1NMO
Flexible DualBand 146/446MHz
Gain & Wave:
146MHz 1.5dBi 1⁄4 wave
446MHz 2.15dBi 1⁄2 wave
VSWR: 1.5:1 or less
Max Power: 60 watts
Length: 16"
Connector: Gold-Plated PL-259
or NMO style
CA-2x4SR
CA-2x4SRNMO
Wideband TX/RX antenna
140-160MHz F/O
435-465MHz
Gain & Wave:
1 46MHz 3.8dBi 5⁄8 wave
446MHz 6.2dBi
5⁄8 wave x 3
VSWR: 1.5:1 or less
140-160MHz
435-465MHz
Max Power: 150 watts
Length: 40"
Connector: PL-259 or
NMO Style
High gain and wide TX
range for use across
the ham bands and
frequencies out of the
ham bands. Commonly
used to assist Search
and Rescue Teams
communicating on
various VHF and UHF
frequencies.
DUAL-BAND HT ANTENNAS
HP-32FHN
Heavy Duty/High Power
Dualband 146/446MHz
Gain & Wave:
146MHz 3.0dBi 1⁄2 wave
446MHz 5.5dBi 5⁄8 wave x 2
VSWR: 1.5:1 or less
Max Power: 350/250W
Length: 38"
Connector: PL-259
Heavy-duty antenna
recommended by the
charity driven MARC
(Motorcycling Amateur Radio
Club) co-founder Ray Davis
(KD6FHN) for motorcycles and
OTR trucks.
BNC-24
146/446MHz HT Antenna
Super flexible and
lightweight
Gain & Wave:
146MHz 2.15dBi
1⁄4 wave
446MHz 3.5dBi 5⁄8 wave
Max Power: 20 watts
Length: 17"
Connector: BNC
SMA-24
146/446MHz HT Antenna
Super flexible and
lightweight
Gain & Wave:
146MHz 2.15dBi
1⁄4 wave
446MHz 3.5dBi 5⁄8 wave
Max Power: 20 watts
Length: 17"
Connector: SMA
SMA-503
146/446MHz HT Antenna
Gain & Wave:
146MHz 1⁄4 wave
446MHz 5⁄8 wave
Max Power: 10 watts
Length: 8.5"
Connector: SMA
MH-209/MH-209SMA CH-32
146/446 HT Antenna
(with BNC Conn)
SMA-501
Gain & Wave: 0dBi
1⁄4 wave
(with SMA Conn)
VSWR: 2.1 or less
Max Power: 5 watts
Length: 3"
Connector: MH-209 BNC
MH-209SMA SMA
Miracle Baby 146/446MHz
Compact Design, surprising
performance!
Gain& Wave: 0dBi 1⁄4 wave
Max Power: 10 watts
Length: 1.75"
Connector: B NC or SMA
DUAL-BAND ANTENNAS FOR THE CHINESE HTs
SBB-2/SBB-2NMO
DualBand 146/446MHz
Gain & Wave:
146MHz 2.15dBi 1⁄4 wave
446MHz 3.8dBi 5⁄8 wave
VSWR: 1.5:1 or less
Max Power: 100 watts
Length: 18"
Connector: Gold-Plated
PL-259 or NMO Style
B-10 / B-10NMO
DualBand 146/446MHz
Gain & Wave:
146MHz –dBi 1⁄4 wave
446MHz 2.15dBi
1⁄2 wave
VSWR: 1.5:1 or less
Max Power: 50 watts
Length: 12"
Connector: PL-259 or
NMO Style
Construction: Black,
cellular look-a-like
SMA-24J
146/446MHz HT Antenna
Super flexible and
lightweight
Gain & Wave:
146MHz 2.15dBi
1⁄4 wave
446MHz 3.5dBi 5⁄8 wave
Max Power: 20 watts
Length: 17"
Connector: SMA-female
SMA-503J
146/446MHz HT Antenna
Gain & Wave:
146MHz 1⁄4 wave
446MHz 5⁄8 wave
Max Power: 10 watts
Length: 8.5"
Connector: SMA-female
SMA-209J
146/446 HT Antenna
Gain & Wave: 0dBi
1⁄4 wave
VSWR: 2.1 or less
Max Power: 5 watts
Length: 3"
Connector: SMA-female
5
DAIWA
COAX SWITCHES
TRI-BAND HT ANTENNAS
Professionally engineered Multi-cavity Heavy-duty diecast metal
Patented feature: Unused circuits are automatically grounded
FOLD-OVER
HINGE
CS-201A
HT-224
6
146/220/446MHz
HT Antenna
Gain & Wave:
146MHz 1.3dBi 1⁄4 wave
220MHz 1.4dBi 1⁄2 wave
446MHz 1.8dBi 5⁄8 wave
Max Power: 10 watts
Length: 11"
Connector: SMA
SMA-3
146/446/900MHz HT Antenna
Wide Band Receive/
Scanner Use
Gain: 146MHz 1.2dBi
446MHz 1.7dBi
900MHz 3.4dBi
VSWR: 2:1 or less
Max Power: 10 watts
Length: 9.75"
Connector: Male SMA
SMA-703
146/446/1200MHz
HT Antenna
Gain & Wave:
146MHz 0dBi 1⁄4 wave
446MHz 0dBi 1⁄4 wave
1200MHz 3.4dBi 5⁄8 wave
Max Power: 10 watts
Length: 6.5"
Connector: SMA
MODEL
Frequency Range (up to)
Power Rating:
CS-201a
600MHz
2.5 kW PEP
1 kW CW
VSWR
Insertion Loss
Isolation
Connector
Output Port
below 0.12
less than 0.2 dB
60 dB 600 MHz
SO 239
2
CS-201GII
CS-201GII
2 GHz
1.5 kW CW (up to 30 MHz)
250 W CW (up to 1 GHz)
150W CW (up to 2 GHz)
below 1:1.3 at 1.3 GHz
less than 1.2 dB at 1.2 GHz
50 dB 1 GHz
Gold Plated N
2
TRI-BAND MOBILE ANTENNAS
SBB-224/ SBB-224NMO
Tri-Band Mobile Antenna
146/220/446MHz
F/O
Gain & Wave:
146MHz 2.15dBi 1⁄4 wave
220MHz 3.5dBi 5⁄8 wave
446MHz 6.0dBi 5⁄8 wave x 2
VSWR: 1.5:1 or less
Max Power: 100 watts
Length: 36"
Connector: Gold-Plated
PL-259 or NMO Style
SBB-97
Tri-Band Mobile Antenna
146/446/1200MHz F/O
Gain & Wave:
146MHz 3dBi 1⁄2 wave
446MHz 6.8dBi 5⁄8 wave x 2
1200MHz 9.6dBi 5⁄8 wave x 5
VSWR: 1.5:1 or less
Max Power: 60W
(30W 1.2GHz)
Length: 39"
Connector: N-Type
SBB-94
Tri-Band Mobile Antenna
146/446/1200MHz F/O
Gain & Wave:
146MHz 1.5dBi ¼ wave
446MHz 5.1dBi 8/9 wave
1200MHz 7.2dBi
5/8 wave x 3
VSWR: 1.5:1 or less
Max Power: 60W
(30W 1.2GHz)
Length: 24"
Connector: N-Type
SBB-15
Tri-Band Mobile Antenna
50/146/446MHz
F/O
Gain & Wave:
52MHz 2.15dBi 1⁄4 wave
146MHz 4.5dBi 6⁄8 wave
center-loaded
446MHz 7.2dBi 5⁄8 wave x 3
VSWR: 1.5:1 or less
Max Power: 120 watts FM
Length: 61"
Connector: PL-259
SBB-14 / SBB-14NMO
Tri-Band Mobile Antenna
50/146/446MHz
F/O
Gain & Wave:
52MHz 0dBi 1⁄4 wave
146MHz 3.5dBi 1⁄2 wave
446 MHz 6.0dBi 5⁄8 wave x 2
VSWR: 1.5:1 or less
Max Power: 120 watts FM
Length: 43"
Connector: PL-259 or NMO
connector
DAIWA
POWER METERS
Cross-Needle SWR/Power meters from DAIWA, the company that developed the
technology. Read forward power, reflected power and SWR simultaneously. Very accurate
and easy to use.
CN-100 SERIES
• Economy series bench meter
• Cross needle meter display
• High performance at an economy price
• LED lighted, DC jack on back panel
• Rubber edge guards included
CN-800 Professional Series
Tolerance
SWR Detection Sensitivity
Input/Output Impedance
Input/Output Connectors
Dimensions & Weight
CN-101
1.8-150MHz
15/150/1.5 kW
1.5 kW (1.8-60MHz)
1 kW (144MHz)
+/- 10% (at full scale)
4 W min
50 OHM
SO-239
5" x 3" x 4"/1lb. 8ozs.
CN-103M/N
140-525MHz
20/200 W
200 W
(140-525MHz)
SO-239/N Type
Model
HP Type
HP3 Type
V Type
G Type
GII Type
SII Type
Frequency
1.8~200MHz
140-525MHz 900-1300MHz 2200~2450MHz 900-2500MHz
Power Range: Forward
20/200/2kW 30/300/3KW 20/200W
2/20W
0.2/2W
0.2/2/20w
Tolerance
±10% at full scale
SWR Measurement
1:1~
SWR Detection Sensitivity
5 W min
0.4 W
0.1 W
Input/Output Impedance
50 ohms
Inpute/Output Connectors
M Type (so-239)
M or N Type
N Type
DC Power Supply
DC13.8V (70mA)
Dimensions & Weight
157(W) X 117(H) X 117(D) mm Approx 1Kg
Add 15% of full scale at 160-200 MHz, Power Rating MAX 1kw(144MHz)
HP type, HP2 type, GII type, SII type : DC Power (13.8v) is necessary to operate.
Meter light : ON/OFF Can be switched by light switch.
8
• Professional series bench meter
• Large, easy to read cross needle meter
display
• Mirrored scale in .5W increments eliminates
parallax errors
• LED lighted, DC jack on back panel with
on/off switch
• Rubber edge guards included
MODEL
Frequency
Power Range: Forward
Power Rating
CAA-500
Frequency range: 1.8-500MHz
Functions: SWR and Impedance
Measures and displays SWR and impedance without the need for a separate transmitter and SWR bridge. Highly accurate analog meter
displays SWR and impedance in real time, continuously, as you sweep the selected frequency range. Seven frequency ranges from 1-8MHz
to 500MHz including the 222MHz band! Thumb wheel frequency adjustment effortlessly sweeps the chosen operating range. Two antenna
connectors: SO-239 for 1.8-255MHz and N-female for 300-500MHz. Operates 12-14 hours with six AA internal batteries (with low battery
indicator) or from external 8-16VDC 180mA power source • Impedance: 12.5-300 Ohms • VSWR: 1.1:1 to infinity • Digital readout accurate
to 1 kHz • The primary tool for any antenna adjustment, diagnostic or building project!
CMX-2300
Twin SWR Cross-Needle Meters
High-power HF-VHF meter and low power VHFUHF meter combined in one case, lighted
DAIWA SWITCHING
POWER SUPPLY
SS-330W
30 Amp Switching Power Supply
30 amp continuous, 33 amp peak
Input Voltage: 100-117V
(220-240V user capable
modification)
Output Voltage Adjustable:
5-15V
Dual Meters, Voltage and Amp
Daiwa engineers have succeeded in making a switching supply without the noise
associated with switching supplies. Any switching noise has been isolated away from
the amateur radio bands!
Protection: Cut off at 34 amps
Built in automatic quiet fan
Binding posts on front panel
Light Weight: ONLY 4lbs 4ozs
Dimensions: 5"x 4"x 11" approx
Carry Handle and Rubber Edge
Guards Included
SS-505
50 Amp Switching Power Supply
50 amp continuous, 55 amp peak
50 amps available at all DC output
voltages
Input Voltage: 100-117V (220240V user capable modification)
Output Voltage Adjustable: 5-15V
Dual purpose amp/voltage meter
Protection: Cut off at 56 Amps
Fan: Automatic, extremely quiet
fan
Voltage Fluctuation: Less than
1.5%
Ripple Voltage: Less than 5mV
Conversion Ratio: 84% at 35
amps
Power Consumption: 920W
Light Weight: ONLY 8lbs 4ozs
Binding posts on back panel.
Lighter socket (10A max) on front
panel. Two sets of spring loaded
connectors (6A max each) on front
panel.
Dimensions: 9" 5"x 12.5" approx
Carry handle and rubber edge
guards included
7
MULTI-BAND
HF MOBILE ANTENNA
with the
For use 00/
FT-1
KIIG/
IC-706M/etc.
7
4
-8
FT
UHV-6
The UHV-6 is popular for a number of reasons:
• It is very easy to mount, usually to an existing
SO-239 type mount (Heavy Duty)
• It is small, compact, economical, and
includes a fold-over hinge.
• The user defines the configuration. Without
any coils added, it’s a 6/2m/70cm tribander.
You add the HF coils (40/15/10m are
included) that you want to operate. It is
designed to hold up to three of the smaller HF
coils. Add the 80M coil by itself to keep the
weight below its designed capacity. When
stationary, all the coils can be added
• Typical 2:1 bandwidth
F/O
40M 17kHz
20M 25kHz
15M 125kHz 10M 750kHz
6M 3MHz
UHV-6
8
SINGLE-BAND
MOBILE ANTENNAS
HF/VHF/UHF Mobile Antenna
Gain & Wave:
50 MHz 0dBi ¼ wave
146MHz 2.15dBi 1⁄2 wave
446MHz 5.5dBi 5⁄8 wave x 2
HF bands are 1⁄4 waves, no gain
VSWR: >50 MHz 1.5:1 or less
<50 MHz 2:1 or less
Max Power: >50MHz 200W SSB/100W FM
<50MHz 120 W SSB
Weight: 14-19 ozs
Length: 48" (min) 76" (max)
Connector: PL-259
SBB-25 /
SBB-25NMO
SBB-123
F/O
144-148MHz
Gain & Wave:
4.1dBi 5⁄8 wave
VSWR: 1.5:1 or less
Max Power: 200W SSB
Length: 57"
Connector: Gold-Plated
PL-259 or NMO Style
1260-1300MHz F/O
Gain & Wave:
7.2dBi 5⁄8 wave x 3
VSWR: 1.5:1 or less
Max Power: 50 watts
Length: 24"
Connector: N-Type
TA-3
902-928MHz
Gain & Wave:
6.5dBi 5⁄8 wave x 3
VSWR: 1.5:1 or less
Max Power: 50W
Length: 26"
Connector: N-type
SCANNER ANTENNAS
OPTIONAL HF COILS FOR UHV-6
L-3.5 80 meter coil L-18 17 meter coil
L-14 20 meter coil
FOLD-OVER
HINGE
UHV-4
F/O
QuadBand
Mobile Antenna,
Tunable on 10M & 6M!
Gain & Wave:
10/6M: 1⁄4 wave 0 dBi
146MHz: 1⁄2 wave 2.15dBi
446MHz: 5⁄8 wave x 2
5.5dBi
VSWR: 1.5:1 or less
Max Power:
10M 120W SSB
6M 200W/100W FM
2M -70cm: 100W FM
Length: 54" (approx)
Weight: 1’ 6"
Connector: PL-259
BNC-W100RX (BNC Conn)
SMA-W100RX (SMA Conn)
Super wideband scanner antenna
Double pivoting telescoping element
RX Range: 25-1300MHz
Length, collapsed: 8.25"
Length, extended: 40"
R-2000
902-928MHz
Gain & Wave:
5.1dBi 5⁄8 wave x 2
VSWR: 1.5:1 or less
Max Power: 50 watts
Length: 19"
Connector: N-Type
SINGLE-BAND
BASE AND REPEATER ANTENNAS
CYA-1216E
16 Element Yagi Beam 1240-1300MHz
Gain: 16.6dBi
VSWR: 1.5:1 or less
Max Power: 100 watts
Polarization: Vertical or Horizontal
Length: 4' 5"
Weight: 2 lbs. 11 ozs.
Mounting Mast Diameter: 11⁄4 - 2 ½""
Connector: N-Type
Construction: Aluminum, pre-assembled
CA-F72GF
CA-SUPER22
Mono Band 220MHz antenna
Gain and wave: 6.6dBi
5⁄8 wave x 2
VSWR: 1.3:1 or less
Max Power: 150 watts
Length: 8'
Weight: 2 lbs. 13 ozs.
Mounting Mast Diameter:
11⁄4 - 2 ½"
Connector: SO-239
Construction: One piece
fiberglass
CA-F22GF/CA-F22GFN
VHF Base Antenna w/Cutting Chart.
User tunable for operation between
136-175MHz. After tuning, 4MHz
Bandwidth.
Gain: 5.5dBi
VSWR: 1.5:1 or less
Max Power: 150 watts
Length: 8' 10" Weight: 2 lbs.
Mounting Mast Diameter:
11⁄4 - 2 ½"
Connector: CA-F22GF-SO-239
CA-F22GFN - N-Female
Construction: Two-piece fiberglass
UHF Base Antenna w/
Cutting Chart. User tunable
for operation between 440512MHz. After tuning, 10MHz
Bandwidth.
Gain: 5.5dBi
VSWR: 1.5:1 or less
Max Power: 150 watts
Length: 3' 6"
Weight: 1 lb. 14 ozs.
Mounting Mast Diameter:
11⁄4 - 2 ½"
Connector: N-Type
Construction: Single-piece
fiberglass
CA-52HB4
4 Element 6M Beam Wide Band 50-54MHz
Gain: 10.4dBi
F/B: At least 40dB down
VSWR: 1.5:1 or less
Boom Length: 10’ 6"
Max Power: 400W SSB / 200WFM
Mounting Mast Diameter: 11⁄4 - 2 ½"
Weight: 4 lbs. 10 ozs.
Turning Radius: 7' 4"
Max Wind Speed: 75 MPH
Connector: SO-239
Construction: Aluminum w/stainless steel hardware
CA-712EF
Mono Band 440-450MHz
Base/Repeater Antenna
Gain & Wave: 9dBi
1⁄2 wave x 12
VSWR: 1.5:1 or less
Max Power: 200 watts
Length: 10' 5"
Weight: 3 lbs.
Mounting Mast Dia:
11⁄4 - 2 ½"
Connector: N-Type
Construction: Heavy-duty
fiberglass, 2 sections
KP-20
Mono-Band 902-928MHz
Base/Repeater Antenna
Gain & Wave: 9.2dBi
1⁄2 wave x 19
VSWR: 1.2:1 or less
Max Power: 100 watts
Length: 7' 4"
Mounting Mast Diameter:
11⁄4 - 2 ½"
Connector: N-Type
Construction: Single-piece
fiberglass
GP-21
Mono Band 1240-1300MHz
Base/Repeater Antenna
Gain & Wave: 14.9dBi
1⁄2 wave x 21
VSWR: 1.5:1 or less
Max Power: 100 watts
Length: 8'
Weight: 2 lbs. 8 ozs.
Mounting Mast Diameter: 11⁄4
- 2 ½"
Connector: N-Type
Construction: Single-piece
fiberglass
9
802.11/HSMM/Wi-Fi ANTENNAS
DUPLEXERS
CF-416A, 416B, 416C
Band Pass
Ins. Loss Max Power
1.3-170MHz 0.15dB 800w PEP
350-540MHz 0.25dB 500w PEP
Isolation: 60dB
CONNECTORS:
SF-D53NSR
5700-5900MHz Antenna
Gain & Wave: 5.5dBi
½ wave x 3
Max Power: 50 watts
Length: 7"
Connector: N-male
10
SF-245R
2.4GHz Wi-Fi/Access
Point Antenna
Gain & Wave:
7.4dBi ½ wave x 5
VSWR: 1.5:1 or less
Max Power: 50 watts
Length: 18"
Construction: Fiberglass
Connector: N-male
CF-416A CF-416B CF-416C
Output: SO-239SO-239N-Female
Low In: PL-259PL-259PL-259
High In: PL-259N-MaleN-Male
SF-245SPR-R
High gain mobile
Wi-Fi antenna
Gain & Wave: 7.4dBi,
½ wave x 5
VSWR: 1.3:1 or less
Length: 18"
Connector: N-male
Construction:
Fiberglass, spring base
CF-142
146/220MHz
CP-45
GP-24-3R
GP-24SR
GP-24-3
3 Degree Downtilt
Elevation Pattern
GP-24S
Elevation Pattern
Wi-Fi/Access Point antenna
w/3-degree downtilt
Gain & wave: 15.4dBi
½ wave x 22
VSWR: 1.5: 1 or less
Max Power: 100 watts
Length: 5'10"
Weight: 2 lbs
Connector: N-Female
Construction: Singe piece fiberglass
Wi-Fi/Access Point Antenna
Gain & Wave: 9.9dBi
½ wave x 13
VSWR: 1.5:1 or less
Max Power: 100 watts
Length: 3' 7"
Weight: 1 lbs. 6 ozs.
Connector: N-female
Construction: Singe piece
fiberglass
Aluminum telescoping
antenna/utility mast
Collapsed length: 54"
Maximum length: 14' 8"
Weight: 3 lbs
Maximum weight load: 22 lbs
Max diameter: 15/16"
Min diameter: 7/8"
• 4 high strength anodized
aluminum sections
• Friction locks with nylon
compression bushings
• Guy bracket and 45" guy
line included
• Double SO-239 standoff support included for
attaching mobile PO style
antennas
• Designed to be supported by
the YS-45 Tripod
Band Pass
Ins. Loss Max Power
Output:
Low In: High In:
1.3-150MHz 0.2dB
200-480MHz 0.3dB
Isolation: 40dB
CONNECTORS:
600w PEP
400w PEP
SO-239 PL-259PL-259
YS-45
Welded
aluminum
tripod for
the CP-45
mast
Minimum
length:
34"
Max
length:
55"
Support
leg
radius:
24"
Weight: 3 lbs 4 ozs
Maximum weight load: 22 lbs
• Non-skid rubber feet on
support legs
• Friction lock with nylon bushing
CF-4160K, 4160I
CF-4160N, 4160J
Band Pass
Band Pass
146/446MHz
Ins. Loss Max Power
1.3-170MHz 0.1dB 800w PEP
350-540MHz 0.2dB 500w PEP
Isolation: 60dB
CONNECTORS:CF-4160K CF-4160I
Output:
SO-239SO-239
Low In:
PL-259PL-259
High In:
PL-259N-Male
Ins. Loss Max Power
1.3-170MHz 0.15dB 800W PEP
350-540MHz 0.25dB 500W PEP
Isolation: 60 dB minimum
CONNECTORS:CF-4160N CF-4160J
Output:
N-femaleSO-239
Low In:
N-maleSO-239
High In:
N-maleSO-239
CF-360A
CF-416W
Multi-Option Duplexer 2M/440MHz
– 220MHz/440MHz – 2M/4401200MHz
HF/6M-440MHz Duplexer
Band Pass
Ins. Loss Max Power
1.3-30MHz 0.2dB 600w PEP
Band Pass Ins. Loss Max Power 49-470MHz 0.2dB 600w PEP
1.3-250MHz .2dB 400w PEP Isolation: More than 45dB
400-1400MHz.25-.3dB 200w PEP CONNECTORS:
Isolation: 30dB
Output:
Low In: High In:
SO-239
PL-259 PL-259
CONNECTORS:
Output:
Low In:
CF-360B
HF/6M-440MHz Duplexer
Band Pass
Ins. Loss Max Power
1.3-30MHz 0.2dB 600w PEP
49-470MHz 0.2dB 600w PEP
Isolation: More than 45dB
CONNECTORS:
Output:
Low In: High In:
PL-259
SO-239 SO-239
High In:
N-FemalePL-259 N-Male
11
CF-706A
CF-530C
CF-530
HF/6M/2M – 70cm Duplexer
for the FT-8900
Band Pass Ins. Loss Max Power
1.3-90MHz 0.2dB 600w PEP
125-470MHz 0.2dB 600w PEP
Isolation: More than 45dB
CONNECTORS:
Output:
Low In: High In:
PL-259 SO-239SO-239
HF/6M/2M-70cm Duplexer
For the IC-706/MKII/G FT-100
Band Pass Ins. Loss Max Power
1.3-90MHz 0.2dB 600w PEP
125-470MHz 0.2dB 600w PEP
Isolation: More than 45dB
CONNECTORS:
Output:
Low In: High In:
SO-239
PL-259 PL-259
HF/6M/75MHz-70cm Duplexer
For the IC-706/MKII/G FT-100
Band Pass Ins. Loss Max Power
1.3-57MHz 0.4dB 350w PEP
75-550MHz 0.4dB 350w PEP
Isolation: More than 40dB
CONNECTORS:
Output:
Low In: High In:
SO-239
PL-259 PL-259
CF-4130B
CF-413B
HF-440MHz/1200MHz Duplexer
Band Pass Ins Loss Max Power
1.3-460MHz 0.2dB 500W PEP
840-1400MHz 0.3dB 200W PEP
Isolation: 55 dB minimum
CONNECTORS:
Output
Low In High In
N-Female PL-259N-male
HF-440MHz/1200MHz Duplexer
Band Pass Ins Loss Max Power
1.3-500MHz.25dB 500W
840-1300MHz.4dB 200W
Isolation: More than 55dB
CONNECTORS:
Output
Low In High In
N-Female PL-259N-male
CFX-514 , CFX-514N
TRIPLEXERS
CFX-324A (w/ coax leads)
CFX-324B (w/o coax leads)
146/220/446MHz Triplexer
Band Pass
CFX-431B
CFX-4310C
CFX-514J , CFX-5140
Band Pass Ins. Loss Max Power
Band Pass Ins. Loss Max Power
Band Pass
146/446/1200MHz
Ins. Loss Max Power 1.3-60MHz 0.15dB 1000w PEP
1.3-150MHz 0.2dB 600w PEP
200-320MHz 0.25dB 600w PEP
390-500MHz 0.3dB 600w PEP
Isolation: 40dB
CONNECTORS: CFX-324A CFX-324B
Output:
SO-239 SO-239
Low In:
PL-259 PL-259
Mid In:
PL-259 PL-259
High In:
PL-259 PL-259
{
100-150MHz0.25dB 800w PEP
350-500MHz0.25dB 500w PEP
840-1.4GHz 0.3dB 200w PEP
Isolation: 50dB
CONNECTORS:
Output:
Low In:
Mid In: High In: N-Female
PL-259
PL-259
N-Male
146/446/1200MHz
{ 1.3-60MHz
0.15dB
100-150MHz0.25dB
350-500MHz0.25dB
840-1.4GHz 0.3dB
Isolation: 50dB
CONNECTORS:
Output: Low In: Mid In: High In: 50/146/446MHz
1000w PEP
800w PEP
500w PEP
200w PEP
N-Female
PL-259
PL-259
N-Male
Ins. Loss Max Power
1.3-90MHz 0.15dB 800w PEP
130-200MHz 0.2dB 800w PEP
380-500MHz 0.25dB 500w PEP
Isolation: 55dB
CONNECTORS: CFX-514J CFX-5140
Output:
SO-239 SO-239
Low In:
SO-239 PL-259
Mid In:
SO-239 PL-259
High In:
SO-239 PL-259
50/146/446MHz
Band Pass Ins. Loss Max Power
1.3-90MHz 0.2dB 800w PEP
130-200MHz 0.25dB 800w PEP
380-500MHz 0.3dB 500w PEP
Isolation: 55dB
CONNECTORS: CFX-514 CFX-514N
Output
SO-239 SO-239
Low In:
PL-259 PL-259
Mid In:
PL-259 PL-259
High In:
PL-259 N-Male
MOBILE MOUNTS BRACKETS (COAX INCLUDED)
The universal mounts have multiple adjustments planes and are designed to slip over an edge on the vehicle that is ¼ inch thick or less including vertical passenger doors, rear SUV/van
doors, truck doors, hood edges, trunk lips, etc… The trunk lip mounts are adjustable up to 17 degrees and designed for semi-flat trunk surfaces. Either the deluxe or standard coax
cable assembly is included.
Deluxe: 16’9" low loss coax cable with 18"of mini *RG-174A/U type coax for easy entry thru weather seal without causing wind noise, water leaks or coax damage. Low loss 24k gold
plated connectors.
Standard: 16’ 9" RG-58A/U coax. Soft rubber protects vehicle paint. The lip mounts and coax cable assemblies are available separately if needed.
*Mini coax limits max power: HF 200W - VHF 75W - UHF 50 watts
12
HD-5M
HD-5 3/8-24
CP-5M
CP-5NMO
Deluxe medium-duty universal
RS-730 mount and coax cable
combination with SO-239/PL-259
connectors. Designed to hold large
antennas up to 70 inches: CSB790A, CSB-770A, SB-15, etc… 4
adjustment planes, large footprint
that completely sits on the mounting
lip edge for universal application.
Footprint: 3.4" x 1.25"
Max recommended antenna: 40"
Deluxe medium-duty universal
RS-730 mount and coax cable
combination with NMO/PL-259
connectors. Designed to hold
large antennas up to 70 inches: 4
adjustment planes, large footprint sits
on the mounting lip edge for universal
application. Footprint: 3.4" x 1.25"
LD-5M
CT-5M
CM-5M
MG-4N
Deluxe heavy-duty universal RS-840
mount and coax cable combination
with SO-239/PL-259 connectors.
Designed to hold large multi-band
antennas up to 80 inches: UHV-4,
UHV-6, ATAS-120, mini screwdriver
antennas, etc… 2 adjustment
planes, large footprint with support
tab for stability. (Check your
vehicle for flush adjoining surfaces)
Footprint: 3.75" x 1.1"
Deluxe light-duty universal LD-5M
mount and coax cable combination
with SO-239/PL-259 connectors.
Designed to hold small/med
antennas up to 40" to doors/trunks
with limited space for a lip mount to
attach. Small footprint completely
sites on the mounting lip edge for
universal use. Footprint: 1.25" x .1"
Deluxe heavy-duty universal RS-840
mount and coax cable combination
with 3/8x24 threaded socket/PL-259
connectors. Designed to hold small
screwdriver and other antennas with
3/8x24 threaded studs. 2 adjustment
planes, large footprint with support
tab for stability. (Check your
vehicle for flush adjoining surfaces)
Footprint: 3.75" x 1.1"
Standard heavy-duty trunk lip mount
and coax cable combination with
SO-239/PL-259 connectors. Designed
to hold large multi-band antennas up
to 80 inches: UHV-4, UHV-6, ATAS120, mini screwdriver antennas,
etc… Adjustable to 17 degrees, large
footprint with support tab for stability.
(Check your vehicle for flush adjoining
surfaces) Footprint: 4.6" x 2.1"
4.5" magnet mount with SO-239/
PL-259 connectors. 16'9" of
RG-58/A coax
Max recommended antenna: 40"
4.5" magnet mount with
N-connectors, recommended up to
2.5GHz. 13 feet of low loss coax.
ADAPTERS/JUMPERS
AD-15M
NMO to
SO-239
adapter
AD-10N
NMO to
N-female
adapter
HS-05 HS-10
HM-05
HB-05 HM-05JSJ
HS-05: SO-239/SMA Male jumper/adapter, 19"
HS-10: SO-239/SMA Male jumper/adapter, 38"
HM-05: SO-239/BNC Male, jumper/adapter, 19"
HB-05: BNC Female/SMA Male, jumper/adapter, 19" AD-35M
HM-05JSJ: SO-239/SMA-Female, jumper/adapter 19" PL-259 to 3/8 x 24
threaded socket adapter
AD-25M
SO-239 to NMO adapter
CTC-50M
Window feed-thru jumper
Flexible ALPET flat-film
coax jumper allows entry of
coax cable through a sliding
window or door. It forms to
the frame allowing the door or
window to close securely.
Copper-clad steel center core
resists metal fatigue.
Freq Range: DC-1300MHz
Max Power:
HF-50MHz 100W PEP
144MHz 60W FM
440MHz: 40W FM
1200MHz: 10W FM
VSWR: < 500MHz 1.3:1
> 500MHz 1.5:1
Impedance: 50 Ohm
Insertion Loss:
DC-500MHz < 0.5B
500-900MHz < 1.3dB
900-1300MHz < 1.8dB
Connectors: SO-239
Length: 16" approx
MOBILE MOUNTING BRACKETS (NO COAX INCLUDED)
The below lip mounts will fit over virtually ANY lip on a vehicle that is 1/4" thick or less. Rear van and SUV doors, trunk lids, rear truck doors, hoods etc. Simply choose the mount
appropriate for the size antenna you are using. They hold to the edge with set-screws which also grounds the mount to the vehicle, and have rubber coating on the base to prevent paint
damage. If needed, add the desired cable assembly found at the bottom of this page.
RS-840
Heavy-Duty, 2 adj planes, large footprint
with lateral support tab. Thru-bolt & ball
& socket surfaces lock the adjustments
in place. For large antennas up to 80" inc
small screw-driver antennas. Footprint:
3.75" x 1.1"
RS-020
Perfect for doors/trunks with limited
space for a lip mount to attach. 2
adjustment planes, up to 40" antenna
Footprint: 1.25" x 1"
RS-730
Heavy-Duty, 4 adjustment planes, large
footprint. Dial-lock to lay the antenna
down and lock it in place.
For antennas up to 70"
Footprint: 3.4" x 1.25"
RS-660U Roof-Rack Mount
Adjustable roof rack mount, max
opening: 2.5 inches. Mount to either
a horizontal or vertical bracket on the
roof rack and it will adjust to vertical.
Made for the newer wide roof racks.
Max recommended antenna height:
60 inches. 5/8 inch hole accepts
SO-239 connectors
RS-720 / RS-720NMO
Med-duty, 3 adjustment planes, up to
60" antenna. The RS-720NMO has a 3/4"
hole to accept an NMO mount.
RS-720: Footprint 2.1" x 1.15"
RS-720NMO: Footprint 2.1" x 1.15"
MK-30H
12VDC motorized mount for trunks/hatchbacks, rear van doors etc. Heavy Duty motor
for convenient lowering/raising of a mobile
antenna. Approx 17 feet of wire allows the
up/down switch to be located within the
drivers reach. Recommended for antennas
up to 60" and/or 1 lb. Rubber coated base
avoids scratches. Coax cable not included.
Footprint: 2.6" x 2.1"
RS-520
Perfect for doors/trunks with limited
space for a lip mount to attach. 3 adj
planes. Dial-lock to lay the antenna
down and lock it in place, up to 45"
antenna Footprint: 1.1" x .75"
MK-RR
Optional roof rack bracket for the MK-30H
Maximum opening: 2 1/8" x 1 7/8"
MOBILE COAX CABLE ASSEMBLIES
Use these cable assemblies in any of the above mounting brackets, or to insert in a 5/8" hole for permanent mounting. Choose the length and type of coax that fits your needs.
Please Note: Comet and Maldol specialize in “no holes to drill mounting solutions". They tune their antennas for best VSWR when mounted on a lip mount.
CR-5M
Standard Cable Assembly
16 feet 9 inches of RG-58/U coax
with UHF
(PL-259/SO-239) connectors
These low loss cable assemblies are
.24" diameter and have 24k gold
plated connectors. The PL-259/N-male
connector barrel is removable to reduce
the coax length and/or easier routing of
the coax.
3D4M
13’ length, SO-239/PL-259 connectors
3D5M
16’9" length, SO-239/PL-259 connectors
5D4N
13 feet of extremely low loss coax.
Gold-plated N-type connectors.
Recommended up to 2400MHz.
3D4N
13’ length, N-female/N-male connectors
CK-3M
9’9" total length, SO-239/PL-259 connectors
Deluxe cable assemblies use 24k
gold plated connectors, low loss
coax and 18" of mini RG-174A/U
type coax for easy entry thru the
weather seal to avoid wind noise,
water leaks and damage to the coax.
The PL-259/N-male connector barrel
is removable to reduce the coax
length and/or easier routing of the
coax.
CK-3M5
16’6" total length, SO-239/PL-259 connectors
CK-3NMO
16’6" total length, NMO/PL-259 connectors
CK-3 3/8-24
16’6" total length, 3/8-24/PL-259 Connectors
CK-5N
13’3" total length, N-female/N-male connectors (Recommended to 2.5GHz)
13
MULTI-BAND HF THRU 70cm
HVU-8
CHA-250B
The Maldol HVU-8 is a unique and ultracompact HF, VHF and UHF antenna
designed for confined or restricted space
installations. The ground radial system is
BUILT-IN on two collars. Each radial collar
can be rotated 360 degrees to make
mounting as easy as possible!
The Comet CHA-250B is a newly design broadband vertical with NO
GROUND RADIALS. This antenna is EXTREMELY easy to assemble,
requires no tuning or adjustments and VSWR is under 1.6:1 from
3.5-57MHz! Now including an optional guy line collar that slips over
the center element to provide higher wind survival!
Eight Band base station antenna,
80/40/20/15/10/6/2M/70cm
Gain & Wave:
80-6M: 1/4 wave
146MHz: 1/2 wave 2.15dBi
446MHz: 5/8 wave x 2 5.5dBi
VSWR: 1.5:1 or less
Max Power:
HF: 200W SSB
6M -70cm 150W FM
Length: 8’ 6" (approx)
Weight: 5’ 7"
Connector: SO-259
Broadband HF/6M
Ground-Plane
Antenna
TX: 3.5MHz – 57MHz
RX: 2.0 – 90MHz
VSWR: 1.6:1 or less
Max Power: 250W
SSB
Impedance: 50 Ohm
Length: 23’ 5"
Weight: 7 lbs 1 oz
Conn: SO-239
Mast Req’d: 1" – 2" Diameter
Max wind speed: 67MPH
“One person can effortlessly raise the antenna at night when no
one can spot it, and take it down before daybreak. This antenna is
also a great choice for portable operations, such as quick and easy
mini-DXpedition to a campground or a nice tropical island! In short,
the Comet CHA-250B is simple to assemble, painless to elevate and
is easy on the eyes, while at the same time getting you on 6 meters
thru 80 meters without the requirement of an antenna tuner and
ground radials. You’ll even be able to work some DX while you’re at
it!" - Dan Dankert N6PEQ
Typical 2:1 SWR Bandwidth:
80M 22kHz
40M 52kHz
20M 52kHz
15M 134kHz
10M 260kHz
14
H-422
40/20/15/10M rotatable quad-band
dipole
Broadband, compact, trapped dipole
installs in either a “V” or horizontal configuration.
Excellent performance even if mounted only 10-15ft above ground. During
assembly the 20/15/10M bands are tuned simultaneously to the top, middle or
bottom of each band while 40M tunes independently of the other three bands.
“V” Shape Length: 24 ft 5 inches
Rotation Radius: 12 ft 6 inches
Horizontal Length: 33 ft 10 inches
Rotation Radius: 17 ft 5 inches
Weight: 11 lbs 14 oz
Impedance: 50 Ohm
Max Power: 1000W SSB / 500W FM Max Wind Survival: 67MPH
Wind Load: 3.01 sq feet
Connector: SO-239
Construction: Aluminum tubing, stainless steel hardware, heavy-duty mounting
plate CBL-2500 2.5kW balun included
CHV-5X
This is the compact dipole used for HF communications installed above the set of ABC
Television’s "Last Man Standing" with Tim Allen. The crowded and limited space above the set
required a compact multi-band dipole, and the CHV-5X was selected to solve the problem the
minimal space presented.
5-Band, 1/2 wave rotatable dipole for 40/20/15/10/6 meters!
Compact, lightweight, and easily assembled in either a horizontal, "V" shape or ground-plane
configuration. Each band tunes independently of the others.
If you have antenna restrictions, neighbors that tend to complain about antennas, simply want
to operate without drawing attention...or you want a lightweight multi-band antenna to use in
portable or emergency situations, the CHV-5X is a great choice.
Max power: 40/20M 150W SSB
15/10/6M 220W SSB
Horizontal length: 13 ft approx
Weight: 5 lbs 14 oz approx
Impedance: 50 Ohm
Connector: SO-239
Mounting mast req'd: 1"-2.5"
Typical 1.5:1 or less SWR bandwidth:
40M: 22kHz
20M: 36kHz
15M: 54kHz
10M: 140kHz
6M: 1.8MHz
Here the LD-5M mount is attached to the hinged side
of the rear-gate door edge of a Nissan Cube. 2 Set
screws hold it securely in place. The mini RG-174A/U
type coax cable assembly enters the passenger
compartment through the weather seal without
causing wind noise, coax damage or wind noise.
This is the famous B-10NMO. Although it appears to be a cellular phone antenna, it’s actually an
excellent 2M/440MHz dualbander. For around town, this antenna can’t be beat.
NOTE: If you’re going to drill a hole in your vehicle, use the NMO style mount. It’s easy to install
and waterproof. If you DO NOT want to drill a hole, there are many more UHF (PO) style mounts
to choose from.
When mounting an antenna on the rear door of a van/suv/
station wagon and other similar vehicle, the door opens as usual.
When the door is opened, the antenna lays along the side of the
passenger compartment.
EXTENDED CAB TRUCK OWNERS
The rear passenger door is a great place to mount an antenna. It’s within reach,
out of the way and places the antenna above the roof-line. Choose a mount from
pages 12 or 13 and attach the mount either on the side or top of the door. Or, use
the same mount to attach an antenna to the hood. As long as the hood is 1/4 inch
thick or less, the mount will slide over the edge and tighten down with set screws.
15
The CP-5M is the best selling lip mount, here attached
to the side door of a hatch style van door. It will
hold antennas up to 70” in height. 4 set screws
hold it securely and ground the mount to the door.
It is true that an antenna mounted to the side of a
ground plane as in the photo does not have a perfect
radiation pattern. However, high gain antennas and
modern repeater systems have improved greatly of
the past 50 years and more than compensate for a
less than perfect mobile antenna position. Being able
to mount the antenna without damaging the roof,
causing rust and/or leaks, and to be able to easily
reach the antenna to remove it for car washes, garage
entry, and to avoid theft makes lip mount antennas
very convenient!
™
NCG Companies
15036 Sierra Bonita Lane
Chino, CA 91710-8901
(800) 962-2611
(909) 393-6133
FAX (909) 393-6136
www.cometantenna.com
© Entire Contents Copyrighted 05-12 Summer 2012
DISTRIBUTED BY:
NCG COMPANY LTD. U.S. DISTRIBUTOR FOR COMET • DAIWA
NCG Companies
15036 Sierra Bonita Lane
Chino, CA 91710
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement