Philips 26PFL3405H, 22PFL3405H, 22PFL3415H, 22PFL3405H/05, 19PFL3405H, 22PFL3415H/12, 19PFL3405H/05, 26PFL3405H/12, 26PFL3405H/05 User manual
Register your product and get support at www.philips.com/welcome 19PFL3405H/12 22PFL3405H/12 26PFL3405H/12 19PFL3405H/05 22PFL3405H/05 26PFL3405H/05 22PFL3415H/12 EN User manual Model Serial www.philips.com/support Österreich 0810 000 205 €0.07 pro Minute België/Belgique 078250145 €0.03 Per minuut/Par minute България +3592 489 99 96 Местен разговор Hrvatska 01 6403 776 Lokalni poziv Česká republika 800142840 Bezplatný hovor Danmark 3525 8759 Lokalt opkald Estonia 6008600 kohalik kõne tariifi Suomi 09 2311 3415 paikallispuhelu France 0805 025 510 numéro sans frais Deutschland 0800 000 7520 gebührenfreier Anruf Ελλάδα 0 0800 3122 1280 Κλήση χωρίς χρέωση Magyarország 0680018189 Ingyenes hívás Hrvatska 0800 222778 free Ireland North 0800 055 6882 South 1800-PHILIPS 7445477 free Italia 800 088774 Numero Verde Қазақстан +7 727 250 66 17 local Latvia 52737691 local Lithuania 67228896 local Luxemburg/Luxembourg 40 6661 5644 Ortsgespräch/Appel local Nederland 0800 0230076 Gratis nummer Norge 22 70 81 11 Lokalsamtale Polska (022) 349-15-05 Monitory i akcesoria komputerowe, Portugal 800 780 903 Chamada Grátis România 0800-894910 0318107125 Apel gratuit Apel local Россия (495) 961-1111 0.15 USD/minute Србија +381 114 440 841 Lokalni poziv Slovensko 0800 004537 Bezplatný hovor Slovenija 00386 12 80 95 00 lokalni klic España 900 800 655 Teléfono local gratuito solamente para clientes en España Sverige 08 5792 9100 Lokalsamtal Suisse/Schweiz/Svizzera 0844 800 544 Schweizer Festnetztarif Türkiye 0800 261 3302 Şehiriçi arama United Kingdom General No: 0800 331 6015 General National Rate No: 0870 911 0036 free National rate Україна 8-800-500-69-70 Місцевий виклик This information is correct at the time of press. For updated information, see www.philips.com/support. 1 Notice 2 2 Important 4 27 27 28 29 29 30 Automatically install channels Manually install channels Rename channels Rearrange channels Test digital reception 7 Connect devices 3 Your TV Side controls and indicators Remote control 4 Use your TV Switch your TV on / off or to standby Switch channels Watch connected devices Adjust TV volume Use teletext 5 Use more of your TV 7 7 7 9 9 9 10 10 10 11 Access TV menus 11 Rename devices from the home menu 11 Remove devices from the home menu 11 Change picture and sound settings 12 Use the universal access menu 15 Use advanced teletext features 15 Create and use list of favourite channels 16 Use the Electronic Programme Guide 17 Use the TV clock 18 Use timers 19 Use TV locks 20 Use subtitles 21 View photos and play music from a USB storage device 22 Listen to digital radio channels 23 Update the TV software 24 Change TV preferences 25 Access decoder channel 25 Start a TV demo 26 Reset the TV to factory settings 26 31 31 32 34 35 36 37 Back connector Side connector Connect a computer Use a Conditional Access Module Use Philips EasyLink Use a Kensington lock 8 Product information 38 38 38 38 38 38 39 39 Supported display resolutions Multimedia Tuner / Reception / Transmission Remote control Power Supported TV mounts Product speciﬁcation 9 Troubleshooting 40 40 40 40 41 41 41 41 General TV issues TV channel issues Picture issues Sound issues HDMI connection issues Computer connection issues Contact us 10 Index 42 EN 1 Eng lish 6 Install channels Contents 1 Notice 2010 © Koninklijke Philips Electronics N.V. All rights reserved. Speciﬁcations are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those speciﬁed herein, conﬁrmation of their validity and suitability must be obtained. Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied. Warranty • Risk of injury, damage to TV or void of warranty! Never attempt to repair the TV yourself. • Use the TV and accessories only as intended by the manufacturer. • The caution sign printed on the back of the TV indicates risk of electric shock. Never remove the TV cover. Always contact Philips Customer Support for service or repairs. Any operation expressly prohibited in this manual, or any adjustments and assembly procedures not recommended or authorised in this manual shall void the warranty. 2 EN Pixel characteristics This LCD product has a high number of colour pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. Compliance with EMF Koninklijke Philips Electronics N.V. manufactures and sells many products targeted at consumers which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing the products. Philips is committed to develop, produce and market products that cause no adverse health effects. Philips conﬁrms that if its products are handled properly for their intended use, they are safe to use according to scientiﬁc evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products. 1 2 Eng lish Mains fuse (UK only) This TV is ﬁtted with an approved moulded plug. Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug (example 10A). Remove fuse cover and fuse. The replacement fuse must comply with BS 1362 and have the ASTA approval mark. If the fuse is lost, contact your dealer in order to verify the correct type. 3 Reﬁt the fuse cover. In order to maintain conformity to the EMC directive, the mains plug on this product must not be detached from the mains cord cable. Copyright ® Kensington and Micro Saver are registered US trademarks of ACCO World corporation with issued registrations and pending applications in other countries throughout the world. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Note • Available in selected models only. HDMI, the HDMI logo and High-Deﬁnition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other registered and unregistered trademarks are the property of their respective owners. EN 3 2 Important Read and understand all instructions before you use your TV. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or ﬁre! • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. • Never place the TV, remote control or batteries near naked ﬂames or other heat sources, including direct sunlight. To prevent the spread of ﬁre, keep candles or other ﬂames away from the TV, remote control and batteries at all times. • Never insert objects into the ventilation slots or other openings on the TV. • When the TV is swivelled ensure that no strain is exerted on the power cord. Strain on the power cord can loosen connections and cause arcing. Risk of short circuit or ﬁre! • Never expose the remote control or batteries to rain, water or excessive heat. • Avoid force coming onto power plugs. Loose power plugs can cause arcing or ﬁre. 4 EN Risk of injury or damage to the TV! • Two people are required to lift and carry a TV that weighs more than 25 kg. • When stand mounting the TV, use only the supplied stand. Secure the stand to the TV tightly. Place the TV on a ﬂat, level surface that can support the combined weight of the TV and the stand. • When wall mounting the TV, use only a wall mount that can support the weight of the TV. Secure the wall mount to a wall that can support the combined weight of the TV and wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that result in accident, injury or damage. Risk of injury to children! Follow these precautions to prevent the TV from toppling over and causing injury to children: • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the surface. • Never place the TV on tall furniture (such as a bookcase) without anchoring both the furniture and TV to the wall or a suitable support. • Educate children about the dangers of climbing on furniture to reach the TV. Risk of overheating! • Never install the TV in a conﬁned space. Always leave a space of at least 4 inches or 10 cm around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV. Risk of damage to the TV! • Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. Disposal of your old product and batteries Eng lish Risk of injury, ﬁre or power cord damage! • Never place the TV or any objects on the power cord. • To disconnect the TV power cord easily from the power outlet, ensure that you have full access to the power cord at all times. • When you disconnect the power cord, always pull the plug, never the cable. • Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of hearing damage! • Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low temperatures • If the TV is transported in temperatures below 5°C, unpack the TV and wait until the TV temperature matches room temperature before connecting the TV to the power outlet. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Screen care • • • • • Avoid stationary images as much as possible. Stationary images are images that remain on-screen for extended periods of time. Examples include: on-screen menus, black bars and time displays. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage. Unplug the TV before cleaning. Clean the TV and frame with a soft, damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the TV. Risk of damage to the TV screen! Never touch, push, rub or strike the screen with any object. To avoid deformations and colour fading, wipe off water drops as soon as possible. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. EN 5 ECO-Green • High energy efﬁciency • Low standby power • Designed to facilitate recycling Philips continuously focuses on lowering the environmental impact of its innovative consumer products. We aim our efforts towards environmental improvements during manufacturing, reduction of harmful substances, energy-efﬁcient use, end-of-life instructions and product recycling. Thanks to our environmental effort, this TV has been awarded the European Ecolabel –the ﬂower– www.ecolabel.eu You can ﬁnd detailed information on standby energy consumption, warranty policy, spare parts and recycling of this TV on the Philips website for your country at www.philips.com. This TV has features that contribute to energy-efﬁcient use. This TV was awarded the European Ecolabel for its environmental qualities. 6 EN Energy efﬁciency features • Energy saving The energy saving setting of the TV combines several TV settings that result in saving energy. See the smart settings in the setup menu. • Low standby power consumption The class-leading and highly advanced power circuitry brings down the power consumption of the TV to an extremely low level, without losing out on the constant standby functionality. Power management (Available in selected models only) The advanced power management of this TV ensures the most efﬁcient use of its energy. You can check how your personal TV settings, the level of brightness in current onscreen pictures and the surrounding light conditions determine the relative power consumption. End of use To inform yourself on the correct disposal of the TV and batteries, refer to ‘Disposal of your old product and batteries’ in the user manual (see ‘Disposal of your old product and batteries’ on page 5). Eng lish Remote control 3 Your TV 1 2 Congratulations on your purchase, and welcome to Philips! To fully beneﬁt from the support that Philips offers, register your TV at www.philips.com/welcome. 22 21 20 This section gives you an overview of commonly used TV controls and functions. 19 3 4 5 6 7 8 Side controls and indicators 18 9 17 10 11 16 12 1 2 3 13 4 15 14 5 a +/-: Increases or decreases volume. b (Home): Toggles the home menu on or off. c P/CH +/-: Switches to the next or previous channel. d (Power): Switches the product on or off. The product is not powered off completely unless it is physically unplugged. e Remote control sensor. a (Standby-On) • Switches the TV to standby if it is on. • Switches on the TV if it is in standby. b MENU Toggles the main menu on or off. c MHEG/TELETEXT Toggles teletext on or off. d SOURCE Selects connected devices. EN 7 e Colour buttons Selects tasks or options. f AD (Audio Descriptor) (For RF Digital TV only) UK only: Enables audio commentary for the visually handicapped. g OPTIONS Accesses options relating to the current activity or selection. h OK Conﬁrms an entry or selection and displays the channel grid, when watching TV. i (Navigation buttons) Navigates menus. j INFO Displays program information, when available. If the information spans multiple pages, press OPTIONS to go to the next page. k (Mute) Mutes or restores volume. l P +/- (Programme +/-) Switches to the next or previous channel. When the TV menu is on, this functions as Page Up / Down. m 0-9 (Numeric buttons) Selects a channel or setting. n PICTURE (Smart picture) Launches the picture menu. o SOUND (Smart Sound) Launches the sound menu. p +/- (Volume +/-) Increases or decreases volume. q BACK P/P (Previous channel) • Returns to a previous screen. • Returns to the previously viewed channel. 8 EN r GUIDE Switches between channel grid and programme list. s SUBTITLE (For RF Digital TV only) Enables or disables subtitles. t DEMO (Used in selected models only) Toggles the demonstration menu on or off. u FORMAT Selects a picture format. v INCR. SURR Enables Incredible Surround for stereo sources. Enables spatial mode for mono sources. Remote control usage When using the remote control, hold it close to the TV and point it at the remote control sensor. Make sure that the line-of-sight between the remote control and TV is not blocked by furniture, walls or other objects. ~5m ~30˚ 4 Use your TV Eng lish Note • If you cannot locate your remote control and want to switch on the TV from standby, press P/CH +/- on the side of the TV. This section helps you perform basic TV operations. Switch your TV on / off or to standby Switch channels • • • • Press P +/- on the remote control or P/CH +/- on the side of the TV. Enter a channel number using the Numeric buttons. Press OK to use the channel grid. Press BACK P/P on the remote control to return to the previous channel. Note • When you use a favourite list, you can only select those channels in the list (see ‘Select a favourite list’ on page 16). To switch on • If the standby indicator is off, press (Power) at the side of the TV. • If the standby indicator is red, press (Standby-On) on the remote control. To switch to standby • Press (Standby-On) on the remote control. » The standby indicator switches to red. To switch off • Press (Power) at the side of the TV. » The standby indicator switches off. Switch channels with the channel grid The channel grid allows you to view all available channels in a grid format. 1 Press OK. » The channel grid appears. 2 3 Press Tip • Though your TV consumes very little power when in standby, energy continues to be consumed. When not in use for an extended period of time, disconnect the TV power cable from the power outlet. to browse the channel grid. Press OK to select a channel. EN 9 Watch connected devices Use teletext Note • Switch on the device before selecting it as a source on the TV. Use the source button 1 Press SOURCE. » The source list appears. 2 3 Press Press OK to conﬁrm your choice. » The TV switches to the selected device. To increase or decrease volume • Press +/-. To mute or unmute sound • Press to mute the sound. • Press again to restore the sound. EN Press MHEG/TELETEXT. » The main index page appears. 2 Select a page as follows: • Press the Numeric buttons to enter a page number • Press P +/- to view the next or previous page • Press the Colour buttons to select a colour coded item • Press BACK to return to a previously viewed page 3 Press MHEG/TELETEXT to exit teletext. to select a device. Adjust TV volume 10 1 Rename devices from the home menu Access TV menus 1 2 3 After adding a new device to the home menu, you can rename it to your preference. Menus help you to install channels, change picture and sound settings and access other features. 1 Press MENU. » The menu screen appears. Add new device Setup Watch TV Press Press MENU. to select a device to rename. Press OPTIONS. » The options menu appears. 4 Press to select [Rename device], then press OK. » A text input box appears. 5 6 7 Press to select characters. Press OK to conﬁrm each character. Select [Done], then press OK to ﬁnish renaming devices. Note • The device name can be up to 16 characters long. • Press [Aa] to change an uppercase letter to a lowercase letter and vice versa. 2 3 4 Press to select and navigate through one of the following menus. • [Watch TV]: Switches back to the aerial source if another source is selected. • [Add new device]: Adds new devices to the home menu. • [Setup]: Accesses menus to change picture, sound and other settings. Press OK to conﬁrm your choice. Press MENU to exit. Tip • After selecting [Add new device], follow the on-screen instructions to select the correct device and connector. Remove devices from the home menu If a device is no longer connected to the TV, remove it from the home menu. 1 2 3 4 Press 5 Select [Remove], then press OK. » The selected device is removed from the home menu. Press Press MENU. to select a device to remove. OPTIONS. Press to select [Remove device], then press OK. EN 11 Eng lish 5 Use more of your TV Change picture and sound settings • Change picture and sound settings to suit your preferences. You can apply pre-deﬁned settings or change settings manually. • • 3 Note [Energy saving]: Applies low-energy settings. [Natural]: Applies the best picture quality. [Custom]: Lists customised picture settings. Press OK to conﬁrm your choice. » The selected smart picture setting is applied. • When watching TV or using external devices, press OPTIONS then select [Picture and sound] for quick access to picture and sound settings. Use settings assistant Use the settings assistant to guide you through the picture and sound settings. 1 2 3 Press MENU. Press to select [Setup] > [Picture] > [Settings assistant]. Press OK. » The [Settings assistant] menu appears. Follow the on-screen instructions to choose your preferred picture settings. Manually adjust picture settings 1 2 3 • • • • Use smart picture Use smart picture to apply pre-deﬁned picture settings. 1 Press PICTURE. » The [Smart picture] menu appears. 2 Press to select one of the following settings. • [Personal]: Applies the settings set in [Settings assistant] menu. • [Vivid]: Applies rich and dynamic settings. • [Standard]: Adjusts picture settings to suit most environments and types of video. • [Cinema]: Applies settings for movie viewing. • [Game]: Applies settings for games. 12 EN • • • • • • • Press MENU. Press [Picture]. to select [Setup] > Press to select the following settings. [Smart picture]: Accesses pre-deﬁned smart picture settings. [Video contrast]: Adjusts the intensity of video contents, keeping backlight unchanged. [Contrast]: Adjusts the intensity of backlight areas, keeping video contents unchanged. [Brightness]: Adjusts the intensity and details of dark areas. [Colour]: Adjusts colour saturation. [Hue]: Compensates for colour variations. [Sharpness]: Adjusts sharpness in the image. [Noise reduction]: Filters and reduces noise in an image. [Tint]: Adjusts the colour balance in an image. [Custom tint]: Customises tint setting. (Only available if [Tint] > [Custom] is selected) [Digital Crystal Clear]: Fine-tunes each pixel to match surrounding pixels. This produces a brilliant, high-deﬁnition image. • [Dynamic contrast]: Enhances contrast. A [Medium] setting is recommended. • • • • • [Dynamic backlight]: Adjusts brightness of the TV backlight to match lighting conditions. • [MPEG artifact reduction]: Smoothes out transitions on digital pictures. You can switch this feature on or off. • [Colour enhancement]: Makes colours more vivid and improves the details in bright colours. You can switch this feature on or off. [PC mode]: Adjusts the picture when a PC is connected to the TV via HDMI or DVI. [Picture format]: Changes the picture format. [Picture size]: Adjusts the viewing area. (when set to maximum, you might see noise or a rough edge of an image.) [Horizontal shift]: Adjusts the picture horizontally for PC-VGA, DVI, HDMI or YPbPr. [Vertical shift]: Adjusts the picture vertically for PC-VGA, DVI, HDMI or YPbPr. Change picture format 1 Press FORMAT. » A picture format bar appears. 2 Press to select a picture format. » The selected picture format is activated. 3 Press OK to conﬁrm your choice. Summary of picture formats The following picture settings can be conﬁgured. Note [Auto format]: (Not for PC mode.) Enlarges the picture automatically to best ﬁt the screen. The subtitles remain visible. [Super zoom]: (Not for HD and PC mode.) Removes the black bars on the side of 4:3 broadcasts. There is minimal distortion. [4:3]: Shows the classic 4:3 format. [Subtitle zoom]: Displays 4:3 pictures over the full area of the screen, with sub-titles visible. Part of the top of the picture is clipped off. [Movie expand 14:9]: (Not for HD and PC mode.) Scales 4:3 format to 14:9. [Movie expand 16:9]: (Not for HD and PC mode.) Scales 4:3 format to 16:9. [Wide screen]: Scales 4:3 format to 16:9. [Unscaled]: For HD and PC mode only, and in selected models only. Allows maximum sharpness. Some distortion may be present due to the broadcaster’s systems. Set your PC resolution to wide screen mode for best results. • Depending on the format of the picture source, some picture settings are not available. EN 13 Eng lish • Use smart sound • Use smart sound to apply pre-deﬁned sound settings. • 1 2 3 Press SOUND. » The [Smart sound] menu appears. Press to select the following settings. • [Custom]: Applies the settings that were customised in the sound menu. • [Standard]: Adjusts sound settings to suit most environments and types of audio. • [News]: Applies settings for spoken audio, such as news. • [Movie]: Applies settings for movies. Press OK to conﬁrm your choice. » The selected smart sound setting is applied. • • • • • • • Manually adjust sound settings 1 2 3 • • • • • • 14 Press MENU. Press to select [Setup] > [Sound]. » The [Sound] menu appears. Press to select the following settings. [Smart sound]: Accesses pre-deﬁned smart sound settings. [Bass]: Adjusts the bass level. [Treble]: Adjusts the treble level. [Digital audio lipsync]: Enables or disables lipsync audio output. When this is enabled, the TV synchronises the audio and video performance. When disabled, you need to adjust the lipsync audio feature on the external device that is connected to the TV. (Only available with SPDIF connection) [Volume]: Adjusts the volume. [Volume visually impaired]: Sets the mix of visually impaired audio with regular audio. When available, visually impaired audio includes audio descriptions of onscreen action. You can also enable this by pressing AD (Audio Descriptor). (Only applicable for the UK region.) EN • [Balance]: Adjusts the balance of the right and left speakers. [Audio language]: Available for digital channels, when multiple languages are broadcast. Lists available audio languages. [Dual I-II]: Selects audio languages if dual sound broadcast is available. [Mono/Stereo]: Selects mono or stereo if stereo broadcast is available. [TV speakers]: Turns TV speakers on or off. (Available only when you switch on Easylink). [Surround]: Enables spatial sound. [Headphone volume]: Adjusts headphone volume. [Auto volume levelling]: Automatically reduces sudden volume changes, for example, when switching channels. [Delta volume]: Levels out volume differences between channels or connected devices. Switch to the connected device before you change the delta volume. [SPDIF OUT]: Selects the type of digital audio output. • [PCM]: Converts non-PCM audio to PCM audio. • [Multichannel]: Outputs audio to the home theater. Use advanced teletext features You can activate the universal access menu during the ﬁrst installation. Once enabled, you can quickly access the visually impaired and hearing impaired menus when watching TV or external devices. Access the teletext options menu Tip Access the teletext features through the teletext options menu. 1 Press MHEG/TELETEXT. » The teletext screen appears. 2 Press OPTIONS. » The teletext options menu appears. 3 Press to select one of the following options. • [Reveal]: Hides or reveals hidden information on a page, such as solutions to riddles or puzzles. • [Cycle subpage]: Cycles through subpages automatically if subpages are available. • [Language]: Switches to a different language group to display a language correctly when it uses a different character set. • [Freeze page]: Freezes the current page. • [Dual screen] / [Full Screen]: Enables and disables dual screen teletext. 4 Press to make a selection, then press OK to conﬁrm. 5 Press BACK to exit the teletext options menu. • You can also enable the universal access menu by selecting [Setup] > [Installation] > [Preferences] > [Universal access] > [On]. 1 When watching TV, press OPTIONS. » The TV options menu appears. 2 Select [Universal access], then press OK or to enter. 3 Press to select one of the following options and press OK to enter. • [Hearing impaired]: Enables or disables hearing impaired subtitles. • [Visually impaired]: Selects speaker, headphone or both for [Volume visually impaired] audio. Select [Off] to disable audio descriptor. (Only applicable to the UK region). • [Volume visually impaired]: Adjusts the volume of visually impaired audio. Eng lish Use the universal access menu Tip • Press the colour buttons on the remote control to enter the options. Select teletext subpages A teletext page can hold several subpages. Subpages are displayed on a bar next to the main page number. 1 Press MHEG/TELETEXT . » The teletext screen appears. 2 3 Press to select a teletext page. Press to enter a subpage. EN 15 Select T.O.P. teletext broadcasts View all channels Table Of Pages (T.O.P.) teletext broadcasts allow you to jump from one subject to another without using page numbers. T.O.P. teletext is not broadcast on all TV channels. You can exit a favourite list, and view all installed channels. 1 When watching TV, press OK. » The channel grid appears. 1 Press MHEG/TELETEXT. » The teletext screen appears. 2 2 Press OPTIONS. » The channel options menu appears. Press INFO. » The T.O.P. overview appears. 3 3 4 Press to select [Select list], then press OK or to enter. Press 4 Select [All], then press OK. » All channels are displayed in the channel grid. to select a subject. Press OK to view the page. Create and use list of favourite channels Note • All favourite channels are marked by an asterisk when you view the channel grid. You can create a list of your preferred TV channels so that you can ﬁnd those channels easily. Add a channel to a favourite list Tip Select a favourite list 1 When watching TV, press OK to display the channel grid. 2 Press OPTIONS. » The channel options menu appears. 1 When watching TV, press OK. » The channel grid appears. 3 Press to select [Select list], then press OK to enter. » The channel list options appear. 2 Press to select a channel to add to a favourite list. 3 Press OPTIONS. » The channel options menu appears. 4 Select [Mark as favourite], then press OK. » The channel is added to the favourite list. 4 Select [Favourite], then press OK. » Only channels in the favourite list appear in the channel grid. Note • View all channels before adding a channel to a favourite list. • The favourite channel grid is empty until you add channels into the favourite lists. Note • All favourite channels are marked by an asterisk in the channel grid. 16 EN 1 2 3 4 When watching TV, press OK. » The channel grid appears. Press remove. Press Use EPG 1 When watching TV, press GUIDE. » The EPG planner screen appears. 2 Press MENU. » The program guide menu appears. 3 Press to select an option, and then press OK to conﬁrm. 4 Press to select a channel to OPTIONS. Select [Unmark as favourite], then press OK. » The channel is removed. Eng lish Remove a channel from a favourite list MENU to exit the EPG menu. Note • Only the channels in the [Preferred EPG channels] list appear in the EPG menu. Use the Electronic Programme Guide EPG is an on-screen guide available for digital channels. EPG allows you to: • View a list of digital programmes being broadcast • View upcoming programmes • Group programmes by genre • Set reminders when programmes start • Set up preferred EPG channels Use the EPG options menu Use the EPG options menu to set or clear reminders, change day and access other useful EPG options. 1 2 4 5 Press OK to enter or activate the option. Note • EPG data is available only in selected countries and can take some time to load. • Press GUIDE to switch between EPG and channel grid. Press OPTIONS. » The EPG menu appears. Press to select one of the following options. • [Set remind] / [Clear remind]: Sets or clears programme reminders. • [Change day]: Sets the EPG day. • [Show info]: Displays programme information. • [Search by genre]: Searches TV programmes by genre. • [Scheduled reminders]: Lists programme reminders. Only available for upcoming programmes. • [Preferred EPG channels]: Sets preferred EPG channels. When watching TV, press GUIDE. » The EPG planner screen appears displaying information about the scheduled programmes. Tip GUIDE. 3 Switch on EPG 1 Press Press BACK to exit the EPG menu. Tip • Press GUIDE to switch between EPG and channel grid. EN 17 Use the TV clock You can display a clock on the TV screen. The clock displays the current time using time data received from your TV service operator. Set the TV clock manually In some countries, you need to set TV clock manually. 1 2 3 4 5 Press MENU. Select [Setup] > [Features] > [Clock]. » The [Clock] menu appears. Press to enter time. Select [Done] to conﬁrm. Press MENU to exit. Change the clock mode 1 2 broadcast, the clock displays the time data from your TV service operator as priority. MENU. Press to select [Setup] > [Installation] > [Clock] > [Auto clock mode]. 3 Press to select [Automatic] or [Manual]. 4 Press OK to conﬁrm. Change the time zone 1 2 3 4 Note • If your selected country supports digital Press Press MENU. Press to select [Setup] > [Installation] > [Clock] > [Time zone]. Press to select your time zone. Press OK to conﬁrm. Note • This option is only available if you select [Auto clock mode] > [Manual] (in countries with clock transmission data). Display the TV clock Use daylight saving 1 1 2 2 3 When watching TV, press OPTIONS. » The TV option menu appears. Select [Clock]. Press OK. Note MENU. Press to select [Setup] > [Installation] > [Clock] > [Daylight saving]. 3 4 Press OK or 5 Press OK to conﬁrm. • To disable the clock, repeat the above procedure. Press to enter [Daylight saving]. Press to select [Standard time] or [Daylight saving time]. Note • This option is only available if you select [Auto clock mode] > [Manual]. 18 EN You can set timers to switch the TV to standby at a speciﬁed time. Tip • Set the TV clock before you use timers. Automatically switch the TV to standby (sleep timer) Automatically switch the TV on (on timer) You can switch the TV to a speciﬁed channel at a speciﬁed time, from standby or power-on mode. 1 2 1 2 Press MENU. Press to select [Setup] > [Features] > [Sleep timer]. » The [Sleep timer] menu appears. 3 Press to select a value between zero and 180 minutes. » The sleep timer can be set in steps of ﬁve minutes. If set to zero, the sleep timer is switched off. 4 Press OK to switch on the sleep timer. » The TV switches to standby after the speciﬁed time. Press to select [Setup] > [Features] > [On timer]. Press to enter the [On timer] menu. • [Activate]: Selects how often the TV is switched on. • [Time]: Sets the time to switch on the TV. • [Programme no.]: Selects the channel or the connected device. 4 Press Tip sleep timer during the countdown. MENU. 3 Sleep timer switches the TV to standby after a pre-deﬁned period of time. • You can switch off your TV earlier or reset the Press MENU to exit. Tip • Select [On timer] > [Activate] > [Off] to disable this feature. EN 19 Eng lish Use timers Use TV locks You can prevent your children from watching certain programmes or channels by locking the TV controls. Set or change your PIN code 1 2 3 Press MENU. Press to select [Setup] > [Features] > [Set code] / [Change code]. » The [Set code] / [Change code] menu appears. Enter your code using the Numeric buttons. » Follow the on-screen instructions to create or change your PIN code. Tip Lock or unlock one or more channels 1 When watching TV, press OK to display the channel grid. 2 Press unlock. 3 4 Press 5 For each selection, press OK to lock or unlock the channel. » The ﬁrst time you lock or unlock a channel, you are prompted to enter your PIN code. 6 Enter your code and press OK. » If the channel is locked, a lock icon is displayed. 7 Repeat the process to lock or unlock more channels. • If you forget your code, enter ‘8888’ to override any existing codes. to select a channel to lock or OPTIONS. Press to select [Lock channel] or [Unlock channel]. Note Lock or unlock the TV • Switch the TV off and on again for the change Lock the TV to prevent access to all channels and connected devices. • If you use P +/- on your remote control to 1 2 Press MENU. Press to select [Setup] > [Features] > [TV lock]. » You are prompted to enter your PIN code. 3 Enter your code using Numeric buttons. » The [TV lock] menu appears. 4 5 Press 6 to select [Lock] or [Unlock]. Press OK to conﬁrm. » All channels and connected devices are locked or unlocked. Press • Switch the TV off and on again for the change to take effect. • If you select [Lock], you have to enter your code every time you turn on your TV. EN switch between channels, the locked channels are skipped. • If you access the locked channels from the channel grid, you are prompted to enter your PIN code. Set parental ratings Some digital broadcasters rate their programmes according to age. You can set your TV to display only programmes with age ratings higher than your child’s age. 1 2 MENU to exit. Note 20 to take effect. Press MENU. Press to select [Setup] > [Features] > [Parental rating]. » A code setup screen appears. 3 Enter your code using Numeric buttons. » The parental rating menu appears. 4 5 6 Press to select an age rating. Press OK to conﬁrm. Press MENU to exit. You can enable subtitles for each TV channel. Subtitles are broadcast via teletext or DVB-T digital broadcasts. With digital broadcasts, you can select a subtitle language. Enable subtitles on analogue TV channels 1 2 3 Select an analogue TV channel. 4 Press MHEG/TELETEXT to switch off teletext. Select a subtitle language on digital TV channels Note • When you select a subtitle language on a digital TV channel as described below, the preferred subtitle language set in the installation menu is temporarily overruled. 1 2 Press MHEG/TELETEXT. Enter the three-digit page number of the subtitle page with the Numeric buttons. 5 Press SUBTITLE. » The [Subtitle mode] menu appears. 6 Select [On] to display subtitles always or [On during mute] to display subtitles only when audio is muted. 7 8 Press OK to enable subtitles. Press MENU. Press to select [Setup] > [Features] > [Subtitle language]. 3 Press OK or to enter the list of available languages. 4 5 Press to select a subtitle language. Press OK to conﬁrm. Tip • You can also access the [Subtitle language] menu while watching TV by pressing OPTIONS > [Subtitle language]. Repeat this procedure to enable subtitles on each analogue channel. Tip • Select [Subtitle mode] > [Off] to disable subtitles. Enable subtitles on digital TV channels 1 When watching digital channels, press SUBTITLE. » The [Subtitle mode] menu appears. 2 Select [On] to display subtitles always or [On during mute] to display subtitles only when audio is muted. 3 Press OK to enable subtitles. EN 21 Eng lish Use subtitles View photos and play music from a USB storage device View a slide show of your photos 1 When a full screen image of a photo is displayed, press OK. » A slide show begins from the selected photo. 2 Press the following buttons to control the slide show: • OK to pause the slide show. • to go back or move forward to the next image. • BACK to stop the slide show. Caution • Philips is not responsible if the USB storage device is not supported, nor is it responsible for damage or loss of data from the device. Use the USB connector to view photos or listen to music stored on a USB storage device. 1 2 3 4 Turn on the TV. Connect the USB storage device to the TV. » The home menu appears. Press Change slide show settings 1 When viewing a slide show, press OPTIONS. » The slide show options menu appears. 2 Press to select one of the following. • [Start Slideshow] / [Stop Slideshow]: Starts or stops a slide show. • [Slideshow transitions]: Sets the transition from one picture to the next. • [Slideshow frequency]: Sets the amount of time that a picture is shown. • [Rotate image]: Rotates a picture. • [Show info]: Displays the picture name, date, size and next picture in the slide show. 3 Press OK to conﬁrm your setting. to select [Browse USB]. Press OK to conﬁrm. » The USB thumbnail browser appears. Tip • Press GUIDE to switch between thumbnail and ﬁle browsing views. View photos 1 In the USB browser, press [Picture] folder. 2 Press album. 3 Press OK to view a full screen image of the photo. to enter the to select a photo or a photo Note Tip • When in full screen mode, press between photos. 22 EN • [Rotate image] and [Show info] appear only to move when you press OK to pause the slideshow. 1 In the USB thumbnail browser view, select [Music] and press to enter. • Press GUIDE to switch between thumbnail and ﬁle browsing views. 2 Press album. 3 Press OK to play the selected music. Button OK / to select a music track or Function Pause, resume play or stop playback. Go to the previous or next music. Music settings When listening to music, press OPTIONS to access one of the following music settings. • [Start playback] / [Stop playback]: Starts or stops the music. • [Repeat] / [Play once]: Repeats a song. / Disables repeat play and plays a song or album once. • [Shufﬂe on] / [Shufﬂe off]: Enables or disables random play of songs. • [Show info]: Displays the ﬁle name. • [TV speakers] (Available only when you activate Easylink): Sets the TV speakers on or off. • [Sound]: Adjusts the sound setting. Disconnect a USB storage device Caution • Follow this procedure to avoid damage to your USB storage device. 1 2 Press BACK to exit the USB browser. Wait for ﬁve seconds then disconnect the USB storage device. Listen to digital radio channels If digital broadcasting is available, digital radio channels are installed automatically during installation. 1 When watching TV, press OK to display the channel grid. 2 3 Press 4 Press to select a radio channel and press OK to listen. OPTIONS. Press to select [Select list] > [Radio]. » The radio channel grid appears. Note • Select [Select list] > [All] to exit radio channels and view all channels. View a slideshow with music You can view a picture slide show with background music. 1 2 3 Select an album of songs. 4 5 Select an album of pictures. Press OK. Press BACK to return to the USB content browser. Press OK. EN 23 Eng lish Listen to music Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Check www.philips.com/support for availability. Check the current software version 1 2 Press MENU. Press to select [Setup] > [Software update] > [Current software inf]. » The TV displays the current software information. Download the software 1 On your PC, open a web browser and go to www.philips.com/support. 2 Download the latest software upgrade ﬁle to your PC. 3 4 Decompress the ZIP-ﬁle. Update using a USB device Connect your USB storage device to the TV. 1 If the software update screen does not appear automatically, select [Setup] > [Software update] > [Local updates] > [USB]. 2 Press OK to update the TV software manually. 3 Follow the on-screen instructions to complete the update. Note • The TV restarts after the software update is complete. Update using OAD 1 If using (DVB-T) digital broadcast, your TV automatically receives software updates. If you receive a message on your screen asking you to update your software: • Select [Update now] to update the software immediately. • Select [Remind me later] to exit the update screen at that time and be reminded later. • Select [Cancel] to skip the update. 2 If you select [Cancel], you can manually access the OAD update by selecting [Setup] > [Software update] > [Local updates] > [OAD]. 3 Select the available version of OAD and press OK. 4 Follow the on-screen instructions to start the update. Copy the autorun.upg ﬁle to the root directory of the USB device. Update software You can update the TV software via a USB storage device or OAD (Over the Air software Download). Note • The TV restarts after the software update is complete. 24 EN Access decoder channel Use the preferences menu to customise your TV settings. You can map channels provided through a decoder or descrambler to your TV channel selection. In this way, you can select these channels by using the RC of your TV. The decoder or a descrambler must be connected to EXT1 (SCART). 1 2 3 4 5 Press MENU. Select [Setup] > [Installation] > [Preferences]. • [Location]: Optimises TV settings for your location - home or shop. • [Volume bar]: Displays the volume bar when you adjust the volume. • [Channel Information]: Displays information about the TV channel every time you switch channels. Select [Full] to view channel information or [Off] to turn off the channel information. • [Universal access]: Enables or disables the universal access menu. • [EasyLink]: Enables one-touch play and one-touch standby between EasyLink-compliant devices. • [Pixel Plus Link]: Overrides the settings of connected devices and uses the settings of the TV. (Available only when you activate Easylink). • [E-sticker]: For shop mode only. Sets the location of the e-sticker. Press to select your preference. Set decoder channel Map channels from a decoder or descrambler. 1 2 Press 3 4 Press 5 Select one channel to map to the decoder / descrambler channel and press OK to conﬁrm. 6 7 Select [Status], then press 8 9 Press OK. MENU. Select [Setup] > [Installation] > [Decoder]. to enter [Decoder] menu. Press to select [Channel], then press to enter. to enter. Select [EXT 1] (SCART) the connector used by the decoder / descrambler. Press MENU to exit. Note Press OK. Press MENU to exit. • Select [None] if you do not want to map to the decoder / descrambler channel. EN 25 Eng lish Change TV preferences Start a TV demo You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models. Available demos are displayed in the menu list. 1 2 Press DEMO on the remote control. 3 Press DEMO to exit. Press to select a demo and press OK to view it. Reset the TV to factory settings You can restore the default picture and sound settings of your TV. The channel installation settings remain the same. 1 2 Press 3 4 5 6 Press 26 EN MENU. Select [Setup] > [Installation] > [Factory settings]. to enter [Factory settings]. Select [Reset] to start resetting. Press OK. Press MENU to exit. The ﬁrst time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to re-install and ﬁne tune channels. Automatically install channels This section describes how to search and store channels automatically. Step 1 Select your menu language 1 2 3 4 5 6 Press MENU. Press to select [Setup] > [Installation] > [Language] > [Menu language]. Press OK or Press to enter [Menu language]. Automatically installs the available analogue and digital TV channels and digital radio channels. 1 From the channel installation guide screen, select [Full installation]. 2 Press OK to conﬁrm. » The TV starts to search and store all the available channels. 3 When installation is complete, press OK to exit the installation menu. Update the channel list You can enable automatic update of channels when your TV is in standby mode. The channels stored in your TV are updated every morning according to the channel information in the broadcast. 1 2 to select a language. Press OK to conﬁrm. Press Step 3 Install channels to return to [Installation] menu. Eng lish 6 Install channels 3 Press MENU. Press to select [Setup] > [Installation] > [Channel installation] > [Standby update]. Select [On] to enable the automatic update or select [Off] to disable it. Step 2 Select your country Select the country where you are installing the TV. The available channels for the country are installed on the TV. 1 2 Press MENU. Press to select [Setup] > [Installation] > [Channel installation] > [Automatic channel search]. 3 Press OK or to enter the menu. » The country menu appears. 4 5 Press to select your country. Press OK to conﬁrm your choice. » The channel installation guide appears on the screen. EN 27 Manually install channels 6 Press found. This section describes how to search and store analogue TV channels manually. 7 Press to select [Store as new channel] to store the new channel under a new channel number. Step 1 Select your system 8 Press OK to enter [Store as new channel], then press OK. 9 Press to return to the [Channel installation] menu. Note • Skip this step if your system settings are BACK when the new channel is correct. 1 2 Step 3 Fine-tune analogue channels Press MENU. Press to select [Setup] > [Installation] > [Channel installation] > [Analogue: manual install]. » The [Analogue: manual install] menu appears. 1 2 Press MENU. Press to select [Setup] > [Installation] > [Channel installation] > [Analogue: manual install]. » The [Analogue: manual install] menu appears. 3 Press to select [System], then press to enter. 3 4 Press region. Press to select [Fine tune], then press to enter. Press 5 6 Press OK to conﬁrm. 4 5 6 7 Press to enter [Store current channel], then press OK. 8 Press to return to the [Channel installation] menu. to select your country or Press to return to [Channel installation] menu. Step 2 Search and store new TV channels 1 2 Press MENU. Press to select [Setup] > [Installation] > [Channel installation] > [Analogue: manual install]. » The [Analogue: manual install] menu appears. 3 Press to select [Search], then press to enter. 4 Press to manually enter the threedigit frequency. 5 Press OK to begin search. » If a channel is unavailable at the selected frequency, press OK to search for the next available channel. 28 EN to adjust frequency. Press OK to conﬁrm. Press to select [Store current channel] to store the channel number. Rearrange channels You can rename channels. The name appears when you select the channel. After you install channels, you can rearrange the order in which they appear. 1 When watching TV, press OK to display the channel grid. 1 When watching TV, press OK to display the channel grid. 2 3 Select the channel to rename. 2 Press OPTIONS. » The channel options menu appears. Press OPTIONS. » The channel options menu appears. 3 Press OK. 4 Select the channel to rearrange, then press OK. » The selected channel is highlighted. 5 Press to move the highlighted channel to the desired location, then press OK. 6 Press OPTIONS. » [Done reordering] appears on the screen. 7 8 Press OK to conﬁrm. 4 5 6 7 Press to select [Rename channel], then press OK. » A text input box appears. Press to select characters. Press OK to conﬁrm each character. Select [Done], then press OK to ﬁnish renaming channels. Tip • Press [Aa] to change an uppercase letter to a lowercase letter and vice versa. Press to select [Reorder], then press BACK to exit the channel grid. EN 29 Eng lish Rename channels Test digital reception You can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish. 1 2 3 4 Press MENU. Press to select [Setup] > [Installation] > [Channel installation] > [Manual channel search]. Press to enter the menu. Press to enter the frequency of the channel you want to test. 5 Press OK to conﬁrm the frequency, then press OK again to conﬁrm [Search]. 6 When complete, select [Store] to store the frequency. Note • If the signal quality and strength is poor, reposition the aerial or satellite dish and retest. • If you still have problems with the reception of your digital broadcast, contact a specialised installer. 30 EN b EXT 2 (Y Pb Pr and AUDIO L/R) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. Eng lish 7 Connect devices This section describes how to connect devices with different connectors. Examples are provided in the Quick Start. Note • You can use different types of connectors to connect a device to your TV. Back connector c TV ANTENNA Signal input from an antenna, cable or satellite. TV ANTENNA a HDMI 1 Digital audio and video input from highdeﬁnition digital devices such as Blu-ray players. Connections via DVI or VGA require an additional audio cable (see ‘Connect a computer’ on page 34). EN 31 d EXT 1 (CVBS and RGB) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. Side connector e SPDIF OUT Digital audio output to home theatres and other digital audio systems. SPDIF OUT a COMMON INTERFACE Slot for a Conditional Access Module (CAM). f PC IN (VGA and AUDIO) Audio and video input from a computer. PC AUDIO IN/ PC IN(AUDIO) VGA VGA g SERV. U For software update. 32 EN f HDMI (Available only in 26 inch TV) Digital audio and video input from highdeﬁnition digital devices such as Blu-ray players. c VIDEO Composite video input from analogue devices such as VCRs. d USB Data input from USB storage devices. e (Headphone) Stereo audio output to headphones or earphones. EN 33 Eng lish b AUDIO L/R Audio input from analogue devices connected to VIDEO. • Connect a computer Before you connect a computer to the TV • Set the screen refresh rate on your computer to 60Hz. • Select a supported screen resolution on your computer. Connect a computer with one of the following connectors: HDMI cable and HDMI-DVI adaptor PC AUDIO IN/ PC IN(AUDIO) DVI Note • Connections via DVI or VGA require an additional audio cable. • HDMI cable • VGA cable PC AUDIO IN/ PC IN(AUDIO) DVI-HDMI cable VGA VGA • PC AUDIO IN/ PC IN(AUDIO) DVI 34 EN Access CAM services 1 After inserting and activating the CAM, press MENU. A Conditional Access Module (CAM) is provided by digital TV service operators to decode digital TV channels. 2 Press to select [Setup] > [Features] > [Common interface]. » Applications provided by the digital TV service operator appear on the screen. Note • Refer to the documentation from your service operator on how to insert a smart card into the Conditional Access Module. Eng lish Use a Conditional Access Module Note • This menu option is available only if the CAM is inserted and activated correctly. Insert and activate a CAM Caution • Be sure to follow the instructions described below. Wrong insertion of a CAM may damage both the CAM and your TV. 1 Switch off the TV and disconnect it from the power outlet. 2 Following the directions printed on the CAM, gently insert the CAM into the COMMON INTERFACE at the side of the TV. 3 4 5 Push the CAM in as far as it will go. Reconnect the TV to the power outlet. Turn on the TV and wait for the CAM to be activated. This may take several minutes. Do not remove the CAM from the slot when in use — removing the CAM will deactivate digital services. EN 35 Use Philips EasyLink Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. Note Enable or disable EasyLink Note • Do not enable Philips EasyLink if you do not intend to use it. 1 2 • The EasyLink-compliant device must be switched on and selected as the source. • Philips does not guarantee 100% interoperability with all HDMI CEC devices. 3 Press MENU. Press to select [Setup] > [Installation] > [Preferences] > [EasyLink]. Select [On] or [Off]. Use one-touch play EasyLink features One-touch play When you connect your TV to devices that support one-touch play, you can control your TV and the devices with one remote control. One-touch standby When you connect your TV to devices that support standby, you can use your TV remote control to put your TV and all connected HDMI devices in standby mode. System audio control When you connect your TV to HDMI CEC compliant devices, your TV can switch automatically to play audio from the connected device. To use one-touch audio, you must map the audio input from the connected device to your TV. You can use the remote control from the connected device to adjust the volume. 36 EN 1 After enabling EasyLink, press play on your device. » The TV automatically switches to the correct source. Use one-touch standby 1 Press (Standby-On) on the TV’s or device’s remote control. » The TV and all connected HDMI devices switch to standby. When you play content from an EasyLink compliant home theater, the TV speakers are automatically muted. 1 Enable one-touch play and one-touch standby between your Easylink compliant devices by following the instructions in the previous section (see ‘Enable or disable EasyLink’ on page 36). 2 3 Press 4 Use a Kensington lock There is a Kensington security slot at the back of the TV. Prevent theft by looping a Kensington lock between the slot and a permanent object, such as a heavy table. MENU. Press to select [Setup] > [Sound] > [TV speakers] > [Auto EasyLink]. » The TV speakers are turned off automatically when content from an Easylink compliant system is detected. Press to select [Setup] > [Sound] > [TV speakers] > [On] to disable system audio control and enable the TV speakers. Note • To mute the TV speakers, select [TV speakers] > [Off]. EN 37 Eng lish Set TV speakers to EasyLink mode 8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. Multimedia • • Supported storage device: USB (Only FAT or FAT 32 USB storage devices are supported) Supported multimedia ﬁle formats: • Images: JPEG • Audio: MP3 Note Supported display resolutions Computer formats • Resolution - refresh rate: • 640 x 480 - 60Hz • 800 x 600 - 60Hz • 1024 x 768 - 60Hz • 1280 x 720 -60Hz • 1280 x 1024 - 60 Hz • 1360 x 768 - 60Hz Video formats • Resolution - refresh rate: • 480i - 60Hz • 480p - 60Hz • 576i - 50Hz • 576p - 50Hz • 720p - 50Hz, 60Hz • 1080i - 50Hz, 60Hz • 1080p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz. • Multimedia ﬁle names must not exceed 128 characters. Tuner / Reception / Transmission • • • • • Aerial input: 75ohm coaxial (IEC75) DVB: DVB Terrestrial, DVB-T MPEG4 TV system: DVB COFDM 2K/8K; PAL I, B/G, D/K; SECAM B/G, D/K, L/L’ Video playback: NTSC, SECAM, PAL Tuner Bands: Hyperband, S-channel, UHF, VHF Remote control • • Type: PF01E09B Batteries: 2 x AAA (LR03 type) Power • • • 38 EN Mains power: 220-240V, 50Hz Standby power: < 0.3 W Ambient temperature: 5 to 40 degrees Celsius Product speciﬁcation To mount the TV, purchase a Philips TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV. Design and speciﬁcations are subject to change without notice. Warning • Follow all instructions provided with the TV mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper TV mounting that results in accident, injury or damage. TV screen Required size (inches) pitch (mm) 19 22 26 75 x 75 75 x 75 75 x 75 Required mounting bolts (≤ 10mm) 4 x M4 4 x M4 4 x M4 19PFL3405H • Without TV stand • Dimension (WxHxD): 455 x 303.7 x 56 (mm) • Weight: 3.16 kg • With TV stand • Dimension (WxHxD): 455 x 328.7 x 137.9 (mm) • Weight: 3.32 kg 22PFL3405H / 22PFL3415H • Without TV stand • Dimension (WxHxD): 526.02 x 343.5 x 55.79 (mm) • Weight: 4.0 kg • With TV stand • Dimension (WxHxD): 526.02 x 369.5 x 148.96 (mm) • Weight: 4.2 kg 26PFL3405H • Without TV stand • Dimension (WxHxD): 637.4 x 410.8 x 63 (mm) • Weight: 5.21 kg • With TV stand • Dimension (WxHxD): 637.41 x 447.25 x 170 (mm) • Weight: 5.5 kg EN 39 Eng lish Supported TV mounts 9 Troubleshooting This section describes commonly encountered issues and accompanying solutions. General TV issues The TV does not switch on: • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. • Check that the power cable is securely connected. The remote control is not working properly: • Check that the remote control batteries are correctly inserted according to the +/- orientation. • Replace the remote control batteries if they are ﬂat or weak. • Clean the remote control and TV sensor lens. The standby light on the TV blinks red: • Disconnect the power cable from the power outlet. Wait until the TV cools down before reconnecting the power cable. If the blinking reoccurs, contact Philips Consumer Care. You forgot the code to unlock the TV lock feature • Enter ‘8888’. The TV menu is in the wrong language. • Change the TV menu to your preferred language. When turning the TV on / off / to standby, you hear a creaking sound from the TV chassis: • No action is required. The creaking sound is normal expansion and contraction of the TV as it cools down and warms up. This does not impact performance. 40 EN TV channel issues Previously installed channels do not appear in the channel list: • Check that the correct channel list is selected. No digital channels were found during the installation: • Check that the TV supports DVB-T, DVB-T Lite or DVB-C in your country. Some channels are not automatically installed on my TV: • During installation, make sure that you select the country where you are installing the TV (see ‘Step 2 Select your country’ on page 27). Picture issues The TV is on, but there is no picture: • Check that the antenna is properly connected to the TV.s • Check that the correct device is selected as the TV source. There is sound but no picture: • Check that the picture settings are correctly set. There is poor TV reception from an antenna connection: • Check that the antenna is properly connected to the TV. • Loudspeakers, unearthed audio devices, neon lights, high buildings and other large objects can inﬂuence reception quality. If possible, try to improve the reception quality by changing the antenna direction or moving devices away from the TV. • If reception on only one channel is poor, ﬁne tune this channel. There is poor picture quality from connected devices: • Check that the devices are connected properly. • Check that the picture settings are correctly set. HDMI connection issues There are problems with HDMI devices: • Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from a HDMI device. • If the TV does not recognise the HDMI device and no picture is displayed, try switching the source from one device to another and back again. • If there are intermittent sound disruptions, check that output settings from the HDMI device are correct. • If you use an HDMI-to-DVI adapter or HDMI-to-DVI cable, check that an additional audio cable is connected to AUDIO (mini-jack only). Computer connection issues Sound issues There is a picture but sound quality is poor: Note The computer display on the TV is not stable: • Check that your PC uses the supported resolution and refresh rate. • Set the TV picture format to unscaled. • If no audio signal is detected, the TV automatically switches the audio output off — this does not indicate malfunction. • Check that all cables are properly connected. • Check that the volume is not set to 0. • Check that the sound is not muted. There is a picture but the sound quality is poor: • Check that the sound settings are correctly set. There is a picture but sound comes from one speaker only: • Verify that sound balance is set to the centre. Contact us If you cannot resolve your problem, refer to the FAQs for this product at www.philips.com/support. If the problem remains unresolved, contact Philips Consumer Care in your country as listed in the Addendum. Warning • Do not attempt to repair the product yourself. This may cause severe injury, irreparable damage to your product or void your warranty. Note • Make a note of your TV model and serial number before you contact Philips. These numbers are printed on the back of the TV and on the packaging. EN 41 Eng lish The TV did not save your picture settings: • Check that the TV location is set to the home setting. This mode offers you the ﬂexibility to change and save settings. The picture does not ﬁt the screen; it is too big or too small: • Try using a different picture format. The picture position is incorrect: • Picture signals from some devices may not ﬁt the screen correctly. Check the signal output of the device. Cannot remove ‘e-sticker’ banner displayed on the TV. • To remove the logos and images, set the location of your TV to home. 1. Press MENU. 2. Select [Setup] > [Installation] > [Preferences] > [Location]. 3. Select [Home] and press OK. 10 Index A analogue ﬁne-tune antenna 28 31 B batteries bracket for wall mount 38, 5 39 C CAM care channel decoder channel grid channels favourites list ﬁne-tune grid install automatic manual list lock rename reorder / rearrange switch test reception (digital channels) troubleshooting tune update child lock lock channels lock connected devices PIN code ratings lock clock display set common interface computer connect display resolution 42 EN 35 5 25 9 16 28 9 27 28 16 20 29 29 9 30 40 28 16 20 20 20 20 18 18 35 41, 34 38 Conditional Access Module connect antenna PC connectors HDMI overview USB content ratings country 35 31 41, 34 41, 31 31 22 20 27 D decoder default settings demo devices devices add to home menu connect remove rename watch digital channel subtitles test reception digital radio digital services CAM teletext disconnect USB display resolution dispose 25 26 26 10 11 31 11 11 10 21 30 23, 27 35 10, 15 23 38 5 E EasyLink disable enable one-touch play one-touch standby system audio control end of life environmental care e-sticker 36 36 36 36 37 5 5 25 F M 26 16 16 16 28 H HDMI hearing impaired home mode 41, 31, 32 15 25 menu language main menu teletext universal access MHEG teletext MPEG artifact reduction multimedia music digital radio USB with slideshow mute TV speakers 27 11 15 15 10 12 38 23 23 23 37 I install channels automatic manual 27 28 K Kensington lock O OAD on timer one-touch play one-touch standby 24 19, 19 36 36 37 P L language menu subtitle troubleshoot list favourites list location country home or shop lock Kensington lock lock channels lock connected devices PIN code ratings lock 27 21 40 16 27 25 37 20 20 20 20 parental rating PC connect resolution picture format change troubleshooting picture settings PIN code pixel plus link power power consumption preferences product speciﬁcations 20 34, 41 38 13 40 12 20 25 38 38 25 38 EN 43 Eng lish factory settings favourites list add to list create list view list ﬁne-tune channels R T radio rearrange channels reception recycle register product remote control batteries overview technical speciﬁcations rename channels reorder channels resolution restore default 23 29 30, 40 5 7 38, 5 7 38 29 29 38 26 S safety screen care settings picture sound settings assistant shop mode slideshow view with music smart card smart picture smart settings smart sound software over the air download update version sound settings speciﬁcations standby subpages in teletext subtitles language on analogue channel on digital channel switch channels on and off source 44 EN 4 5 12 14, 12 12 25 22 23 35 12 12, 14 14 24 24 24 14 38 9 15 21 21 21 9 9 10 Table of Pages technical speciﬁcations teletext features menu subpages Table of Pages use timer on timer sleep timer standby transmission transporting troubleshooting TV lock lock channels lock connected devices PIN code ratings lock TV overview 16 38 15 15 15 16 10 19 19 19 38, 40 4 40 20 20 20 20 7 U universal access menu USB disconnect USB listen to music update software view photos 15 23 23 24 22 V video format technical speciﬁcations volume adjust automatic levelling delta mute 38 10 14 14 10, 37 W wall mount 4 EN 45 46 EN © 2010 Koninklijke Philips Electronics N.V. All rights reserved.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project