Panasonic | TXL32D25B | Operating instructions | Panasonic TX-L42D25B LCD TV

Model No.
TX-L32D25B
TX-L37D25B
TX-L42D25B
Operating Instructions
LCD Television
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating this product and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
“B” model no. suffix denotes UK model.
English
U.K. Standard
TQB0E0929
Features
■
freesat HD tuner built-in
Receives freesat - free digital satellite broadcasts in the UK
This TV has a built-in freesat HD tuner.
freesat is a free digital TV service which broadcasts via satellite so you can receive TV, radio, interactive TV, and HD TV with
crystal clear reception.
You can enjoy sharp pictures, vivid colours, multi-channel sound, and various services with the interactive content.
■ DVB-T / DVB-T2 tuner built-in
Receives DVB (Digital Video Broadcasting) digital terrestrial broadcasts
DVB-T2 is an advanced digital terrestrial system for more efficient transmission.
Available DVB-T2 broadcasts will be tuned automatically when you perform DVB Auto Setup.
GUIDE Plus+ (p. 21)
This TV supports Gemstar-TV Guide sent from the GUIDE Plus+ system.
Sharp pictures and clear sound with HDMI connection (p. 97)
Enjoy high definition digital picture and high quality sound by using an HDMI cable.
●This TV incorporates HDMI (Version 1.4 with Content Type, Audio Return Channel) and HDMI (Version 1.3a with
Deep Colour) technology.
■
■
■ Using USB devices
■
Enjoy recording and playback the digital TV programmes to the USB HDD. (p. 62 and p. 71)
Enjoy the photo, video and music in the USB Flash Memory on Media Player. (p. 66)
Wireless LAN Adaptor for the network connection. (p. 6 and p. 13)
Entering characters with the USB Keyboard in VIERA CAST. (p. 83)
Timer Programming (p. 22 and p. 52)
Timer Programming enables you to use functions such as programme reminder and programme recording to the external
recorder / registered USB HDD.
VIERA IMAGE VIEWER - SD Card viewer in Media Player (p. 66 - 70)
Enjoy your photos or videos recorded on an SD Card on the TV screen.
■
■ SDXC Card
This TV supports SDXC Card. SDXC is the latest standard of SD Card and a higher storage capacity card.
■ AVCHD
It is possible to play moving pictures recorded on an SD Card or a USB Flash Memory in AVCHD format.
AVCHD is a high definition video recording format. (p. 66)
■ DivX
Offers good compatibility when going from PC to TV, etc. for easy enjoyment of moving pictures. DivX is a video codec that
was developed by DivX, Inc. (p. 95)
■ DLNA
■
■
■
■
■
DLNA is a standard that makes digital electronics easier and more convenient to use on a home network. For example, you
can enjoy watching photos and videos stored in the PC connected to your home network by accessing from the TV. (p. 80)
VIERA CAST - Enjoy great web entertainment (p. 83)
Enjoy the internet contents on the TV such as photos, videos, weather, video communication (ex. Skype™), etc. through an
easy-to-use web interface that is built into the TV.
Link up and control the connected equipment with “Q-Link” and “VIERA Link” (p. 84 - 91)
Q-Link and VIERA Link provide easy recording and playback, creation of a home theatre without complicated settings, etc.
VIERA TOOLS - Display special feature icons for easy accessibility (p. 30)
Special features (such as VIERA Link, Media Player and DLNA operations) can be accessed easily by using the VIERA
TOOLS button.
Owner ID (p. 56)
Owner ID is an anti-theft function. Entering the PIN number and owner’s personal information will help the Police to
determine the owner in the case of theft.
Supports Audio Description signal (p. 17 and p. 33)
Audio Description (when broadcast) adds an additional soundtrack to describe events on screen (narration) and aids
understanding and enjoyment, particularly for visually-impaired viewers.
You can switch Audio Description service Auto or Off, and adjust the volume of the description soundtrack independently of
the main volume.
Digital Switchover for Terrestrial broadcasts
Starting in late 2007 and ending in 2012, TV services in the UK will go completely digital, TV region by TV region.
If you have any questions, please call Digital UK on 08456 50 50 50 or visit www.digitaluk.co.uk
Digital Switchover will cover a period of several weeks. When it starts you will lose all Analogue TV channels and
some Digital TV channels will be missing.
You will need to retune your TV each time this happens to recover your digital channels. Analogue channels are
permanently turned off, it will not be possible to recover them.
●To retune your TV “Auto Setup” in “DVB Tuning Menu”-DVB mode (p. 41)
Users of cable or satellite boxes should still retune the TV to continue to receive Freeview channels via their
aerial. (Your Analogue channel for viewing Cable or Satellite services will change to a new position.)
2
●Due to the digital reception technologies involved, quality of the digital signals may be relatively low in some
cases, despite good reception of analogue channels.
Contents
■ FULL HD
Be Sure to Read
■ HD TV 1080p
This TV supports high definition TV signals.
■ Dolby Digital Plus decoder
Quick Start Guide
This TV uses a high definition panel to produce high definition
pictures close to their original resolution.
IPS LED LCD TV
This TV uses IPS (In Plane Switching) panel with LED
backlight.
● Accessories
/ Options ······························· 6
● Identifying Controls ··································· 8
● Basic Connection ···································· 10
● Auto Setup ·············································· 12
Quick Start
Guide
It is possible to decode Dolby Digital Plus audio track (multichannel sound) and output as a Dolby Digital multi-channel
sound signal from the DIGITAL AUDIO OUT terminal.
● Safety Precautions (Warning / Caution) ················· 4
Intelligent Frame Creation
This increases the frame count and removes juddering
movements, for smooth and flicker-less motion
images with high resolution.
Enjoy your TV!
Wide Viewing Angle
● Watching TV ························································· 16
● Using TV Guide ···················································· 20
● Viewing Teletext···················································· 25
● Watching External inputs ······································ 28
● How to Use VIERA TOOLS ·································· 30
● How to Use Menu Functions ································ 31
digital tick
The digital tick logo indicates that a digital tuner
is built-in.
Freeview HD
Freeview HD is the way to enjoy high definition
digital TV for free.
Basic
This LCD panel offers 178-degree viewing angle.
This delivers beautiful images regardless of the viewing
angle.
Basic Features
Advanced Features
Advanced
● Retuning from Setup Menu ·································· 40
● Tuning and Editing Channels ······························· 42
● Shipping Condition ··············································· 51
● Timer Programming ·············································· 52
● Child Lock ····························································· 54
● Input Labels ·························································· 55
● Owner ID ······························································ 56
● Using Common Interface ······································ 57
● Updating the TV Software ···································· 58
● Displaying PC Screen on TV ································ 59
● Advanced Picture Settings ··································· 60
● USB HDD Recording ············································ 62
● Using Media Player ·············································· 66
● Using Network Services ······································· 74
(DLNA / VIERA CAST / freesat)
● Link Functions ····················································· 84
(Q-Link / VIERA Link)
● External Equipment ·············································· 92
FAQs, etc.
equipment
●Electronic equipment
In particular, do not place video equipment near the
TV. Electromagnetic interference may distort images
/ sound.
●Equipment with an infrared sensor
This TV also emits infrared rays. This may affect
operation of other equipment.
● Technical Information ··········································· 94
● FAQs ···································································· 99
● On screen messages ········································· 102
● Maintenance ······················································· 104
● Glossary ····························································· 104
● Licence ······························································· 105
● Index ··································································· 106
● Specifications ····················································· 107
FAQs, etc.
■Keep the TV away from these types of
3
Safety Precautions
Warning
■Mains plug and lead
To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below:
●This TV is designed to operate on AC 220-240 V,
50 / 60 Hz.
●Insert the mains plug fully into the socket outlet.
●Ensure that the mains plug is easily accessible.
●Remove the mains plug when cleaning the TV.
●Do not touch the mains plug with a wet hand.
If you detect anything unusual, immediately
switch off the mains supply switch and
remove the mains plug.
●Do not damage the mains lead.
• Do not place a heavy
object on the lead.
• Do not place the lead
near a high temperature
object.
• Do not pull on the lead.
Hold onto the mains plug
body when disconnecting
the plug.
• Do not move the TV with the lead plugged into a
socket outlet.
• Do not twist the lead, bend it excessively or
stretch it.
• Do not use a damaged mains plug or socket outlet.
• Ensure the TV does not crush the mains lead.
AC 220-240 V
50 / 60 Hz
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This TV is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted
in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5
amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark ASA or the BSI mark
on the body of the fuse.
If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local dealer.
If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be
removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock
if the cut off mains plug is inserted into any 13 amp socket.
If a new mains plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Blue: Neutral Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your mains plug, proceed as follows.
The wire which is coloured BLUE must be connected to the terminal in the mains plug
Example 1
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the mains plug which is
marked with the letter L or coloured RED.
Under no circumstances should either of these wires be connected to the Earth terminal of the
three pin mains plug, marked with the letter E or the earth symbol .
How to replace the fuse
For plug type shown in example 1:
Example 2
Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit
securely into the mains plug (see example 1).
For plug type shown in example 2:
Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse,
then press the fuse cover down securely (see example 2).
4
Warning
■Take care
To help avoid risk of electrical shock, fire, damage or injury, please follow the warnings below:
●Do not remove covers and never modify the TV yourself as live parts are accessible when they are
removed. There are no user serviceable parts inside.
●Do not expose the TV to rain or excessive moisture. This TV must not be exposed
to dripping or splashing water and objects filled with liquid, such as vases, must
not be placed on top of or above the TV.
●Do not expose the TV to direct sunlight and other sources of heat. To prevent fire
never place any type of candle or naked flame on top or near the TV.
●Do not place the TV on sloped or unstable surfaces.
●Do not insert foreign objects into the TV through the air vents.
●Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to
perform the setup or installation of approved wall-hanging brackets.
●Do not apply strong force or impact to the display panel.
●This TV is designed for Table-top use.
To prevent the spread of fire, keep candles or other open
flames away from this product at all times
■Small object
This product contains possibly dangerous parts that can be breathed in or swallowed by young
children accidentally.
●Keep the dangerous parts out of reach of young children.
●Do not allow children to handle SD Card. As with any small object, the SD Card could be
swallowed by young children. Please remove SD Card immediately after use and store out of
reach of young children.
■Ventilation
Caution
Allow sufficient space around the TV in order to help prevent excessive
heat, which could lead to early failure of some electronic components.
Minimum distance
ventilation openings with items such as newspapers,
tablecloths and curtains.
●Whether you are using the pedestal or not, always ensure the vents in the
bottom of the TV are not blocked and there is sufficient space to enable
adequate ventilation.
10
●Ventilation should not be impeded by covering the
10
10
10
(cm)
■Moving the TV
Before moving the TV, disconnect all cables.
●The TV is heavy. Move the TV with at least two people. Support as shown to
avoid injury by the TV tipping or falling.
●Transport only in upright position.
■When not in use for a long time
This TV will still consume some power even in the Off mode, as long as the mains plug is still
connected to a live socket outlet.
●Remove the mains plug from the wall socket when the TV is not in use for a prolonged period of time.
■Excessive volume
Do not expose your ears to excessive volume from the headphones.
Irreversible damage can be caused.
5
Accessories / Options
Standard accessories
□ Remote Control
●N2QAYB000504
Check that you have the accessories and items shown
□ Batteries for the
Remote Control (2)
●R6
p. 8
□ Pedestal
TX-L32D25B:
TX-L37D25B:
TX-L42D25B:
●TBLX0169
●TBLX0168
●TBLX0167
●TXFBL010QZA ●TXFBL010QBB ●TXFBL010QDB
p. 7
□ Operating Instructions
□ Product Registration Leaflet
Optional accessories
□ Wireless LAN Adaptor
●DY-WL10E-K
□ Communication Camera
●TY-CC10W
□ Wall-hanging bracket
●TY-WK3L2RW
The angle of wall-hanging
bracket can be adjusted in
“zero tilting (vertical)” and
“5-degree tilting” for this TV.
Please contact your nearest Panasonic dealer to purchase the recommended
optional accessories. For additional details, please refer to the manual of the
optional accessories.
Caution
●To use the Wireless LAN Adaptor, an access point needs to be obtained.
●It is recommended to use the Wireless LAN Adaptor with the extension cable.
●To avoid malfunctions caused by radio wave interface, keep the TV away from
the devices such as other wireless LAN devices, microwaves and the devices
that use 2.4 GHz and 5 GHz signals when using the Wireless LAN Adaptor.
●Depending on the area, this optional accessory may not be available.
●Additional information for Wireless LAN Adaptor and access point may be on
the following web site. (English only)
http://panasonic.jp/support/global/cs/tv/
Caution
●This camera can be used on VIERA CAST (p. 83).
●Please also read the manual of the camera.
●Depending on the area, this optional accessory may not be available.
For details, consult your local Panasonic dealer.
Rear of the TV
Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)
200 mm
200 mm
(TX-L32D25B:
100 mm)
Holes for wall-hanging
bracket installation
Depth of screw:
minimum : 8 mm
(TX-L32D25B)
: 10 mm
(TX-L37D25B /
TX-L42D25B)
maximum : 12 mm
Diameter : M4
(TX-L32D25B)
: M6
(TX-L37D25B /
TX-L42D25B)
(View from the side)
Warning
●Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk of
6
personal injury and product damage. In order to maintain the unit’s performance and safety, be absolutely
sure to ask your dealer or a licenced contractor to secure the wall-hanging brackets. Any damage caused
by installing without a qualified installer will void your warranty.
●Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
●Handle the TV carefully during installation since subjecting it to impact or other forces may cause product
damage which will void your warranty.
●Do not mount the unit directly below ceiling lights (such as spotlights or halogen lights) which typically give
off high heat. Doing so may warp or damage plastic cabinet parts.
●Take care when fixing wall brackets to the wall. Wall mounted equipment shall not be grounded by metal
within the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket.
●To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use for an
extended period of time.
Attaching the pedestal
To help avoid risk of damage or injury by the TV tipping or falling, please follow the warnings and
cautions below:
Warning
●Do not disassemble or modify the pedestal.
Caution
Panasonic dealer immediately.
●During setup, make sure that all screws are securely tightened.
●Ensure that the TV does not suffer any impact during installation of the pedestal.
●Ensure that children do not climb onto the pedestal.
●Install or remove the TV from the pedestal with at least two people.
Assembly screw (4)
(silver)
●XSS5+15FN
Bracket
●XYN4+F12FJ
Base
●TKZX5254
●TBLX0169
●TKZX5253
●TBLX0168
●TKZX5255
●TBLX0167
(TX-L32D25B)
(TX-L37D25B)
(TX-L42D25B)
M5 × 15
(TX-L32D25B)
(TX-L37D25B)
(TX-L42D25B)
M4 × 12
■Assembling the pedestal
Use the assembly screws
to fasten the bracket
to the base
securely.
●Make sure that the screws are securely tightened.
●Forcing the assembly screws the wrong way will strip
the threads.
A
D
●Accessories / Options
Assembly screw (4)
(silver)
Quick Start
Guide
●Do not use with any other TVs or displays.
●Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest
Front
■Securing the TV
B
Use the assembly screws
to fasten the pedestal
securely to the TV.
●Make sure that the screws are securely tightened.
●Carry out the work on a horizontal and level surface.
B
Adjusting the panel to your desired angle
●Do not place any objects within the full rotation
range.
15°
15°
(View from the top)
Foam mat or thick soft cloth
7
Identifying Controls
Remote Control
■Installing / removing remote’s batteries
1
2
Pull
open
Close
Note the correct
polarity (+ or -)
Hook
Caution
●Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
●Do not mix old and new batteries.
●Replace only with same or equivalent type. Do not mix different battery types (such as alkaline and
manganese batteries).
●Do not use rechargeable (Ni-Cd) batteries.
●Do not burn or break up batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire, etc.
●Make sure you dispose of batteries correctly.
●Ensure batteries are replaced correctly, there is danger of explosion and fire if battery is reversed.
●Do not disassemble or modify the remote control.
Media Player (p. 66)
Input mode selection
●Switches to SD Card and USB device
●TV - switches freesat / DVB / Analogue /
viewing / listening mode
Other Sat. mode (p. 16)
●AV - switches to AV input mode from Input
Standby On / Off switch
Selection list (p. 28)
●Switches TV On or Off standby
Direct TV Recording (p. 86 and p. 88)
●Records programme immediately in
Main Menu (p. 31)
●Press to access the Picture, Sound and
Setup Menus
Aspect (p. 18)
SD CARD
INPUT
TV
AV
MENU ASPECT
DIRECT TV REC
Channel / Programme Information (p. 17)
EXIT
●Displays channel and programme
information
VIERA
Lin
k
●Accesses VIERA Link Menu
OK
●Confirms selections and choices
●Press after entering channel position by
using numeric buttons to change a channel
quickly
Option Menu (p. 19)
BACK/
RETURN
OPTION
●Used for the selection, navigation and
def
ghi
jkl
mno
pqrs
tuv
wxyz
●Switches to teletext mode / interactive
LAST VIEW
Subtitles (p. 18)
TV Guide (p. 20)
●Displays TV Guide
●Makes selections and adjustments
Return
Hold
●Freeze / unfreeze picture (p. 17)
●Holds the current teletext page (teletext
mode) (p. 26)
Index (p. 27)
(teletext mode)
input mode
REC
PROGRAMME
(Press for about 1 second)
Channel Up / Down
●Selects channel in sequence
Connected equipment operations
DVD/VCR
Volume Up / Down
TV
8
as VIERA Link, Media Player and DLNA
operations
●Switches to previously viewed channel or
Numeric buttons
●Switches sound mute On or Off
●Easily accesses special features such
Last view (p. 19)
●Displays subtitles
Sound Mute
●Returns to the normal viewing screen
●Returns to the teletext index page
services
●Changes channel and teletext pages
●Sets characters
●When in Standby mode, switches TV On
Exit
●Returns to the previous menu / page
abc
operation of various functions
Teletext (p. 25)
●Displays VIERA CAST home screen
Cursor buttons
TEXT STTL INDEX HOLD
●Easy optional setting for viewing, sound, etc.
Coloured buttons
(red-green-yellow-blue)
VIERA CAST (p. 83)
VIERA TOOLS (p. 30)
IDE
GU
VIERA Link Menu (p. 88)
TO
VIERA OLS
DVD Recorder / VCR with Q-Link or
VIERA Link connection
TV
(p. 29, 64 and p. 90)
TV
Function select
●Volume / Contrast / Brightness / Colour / Sharpness /
Tint (NTSC signal) / Bass (“Music” or “Speech” mode
in the Sound Menu) / Treble (“Music” or “Speech”
mode in the Sound Menu) / Balance / Auto Setup
(p. 40 and p. 41)
F
TV
AV
Changes the input mode
USB 2 port
(p. 13, 62, 66
and p. 75)
Mains power On / Off switch
●Use to switch the mains power.
CI slot
(p. 57)
Power and Timer LED
●Red: Standby
Green: On
Orange: Timer Programming On
Orange (flash): Recording of Timer Programming, Direct TV Recording
or One Touch Recording is in progress
Red with
orange flash: Standby with Timer Programming On,
Direct TV Recording or One Touch Recording
●The LED blinks when the TV receives a command from the remote control.
SD Card slot
(p. 66)
HDMI4 terminal
(p. 93)
AV3 terminals
(p. 93)
C.A.T.S. (Contrast Automatic Tracking System) sensor
Headphones jack
(p. 93)
Remote control signal receiver
●Identifying Controls
If you turned the TV Off during Standby mode by the
remote control last time, the TV will be in Standby
mode when you turn the TV On with Mains power On /
Off switch.
Quick Start
Guide
Increases or decreases the channel position by
one. When a function is already displayed, press
to increase or decrease the selected function.
When in Standby mode, switches TV On (Press
for about 1 second).
●Senses brightness to adjust picture quality when “C.A.T.S.” in the
Picture Menu is set to “On” (p. 32)
●Do not place any objects between the TV remote control signal receiver
and remote control.
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
■How to use remote control
MENU
EXIT
Open the main menu
Move the cursor / adjust levels / select from
a range of options
Move the cursor / select the menu item
Access the menu / store settings after
adjustments have been made or options
have been set
Exit the menu system and return to the
normal viewing screen
BACK/
RETURN
Return to the previous menu
■ON SCREEN HELP Instructions box - Operation guide
Example (Owner ID):
Owner ID
Please enter new PIN
PIN
EXIT
* * * *
0
9
PIN entry
RETURN
Operation guide will help you.
■Auto power standby function
●The TV will automatically go to Standby mode in the following conditions:
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• “Off Timer” is active in the Setup Menu (p. 19)
• no operation is performed for the period selected in “Auto Standby” (p. 36)
●This function does not affect the recording of Timer Programming, Direct TV Recording and One Touch
Recording.
9
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any
leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet
first.
Example 1
Connecting dish or aerial
●The freesat channel uses Astra 2 at 28.2° East, and Eurobird 1
TV only
at 28.5° East satellites. To ensure your satellite dish is correctly
installed please consult your freesat registered dealer.
Satellite
dish
Rear of the TV
AC 220-240 V
50 / 60 Hz
●For digital satellite
broadcasts
Satellite cable
Mains lead
■Clamper
Bundle the cables
Terrestrial
aerial
Set the tip
in the hooks
hooks
●To loosen:
knob
●For digital terrestrial and
analogue broadcasts
Keep pushing
the knob
To remove from the TV
snaps
Keep pushing
both side snaps
RF cable
●Attach the clamper:
hole
Insert the clamper
in a hole
●Do not bundle the Satellite cable, RF cable and
mains lead together (could cause distorted image).
10
●Fix cables with clampers as necessary.
●When using the optional accessory, follow the
option’s assembly manual to fix cables.
Aerial input terminal
Example 2
Connecting DVD Recorder / VCR
TV, DVD Recorder or VCR
Example 3
Connecting DVD Recorder / VCR
and Cable TV box
TV, DVD Recorder / VCR and Cable
Rear of the TV
Terrestrial
aerial
Terrestrial
aerial
Quick Start
Guide
AC 220-240 V
50 / 60 Hz
Rear of the TV
AC 220-240 V
50 / 60 Hz
Mains lead
Aerial input
terminal
Mains lead
Aerial input
terminal
●Basic Connection
Fully wired HDMI
compliant cable
RF
cable
Fully wired
SCART cable
Fully wired HDMI
compliant cable
AV 2
Fully wired
SCART cable
HDMI
TV/AV Recorder/AV
RF cable
HDMI
AV 1
HDMI
DVD Recorder or VCR
Cable
AV
Cable TV box
RF OUT
RF OUT
DVD Recorder or VCR
RF IN
RF cable
RF OUT
RF IN
RF cable
RF IN
RF cable
Note
●Connect to the TV’s AV2 for a DVD Recorder / VCR supporting Q-Link (p. 86).
●Connect to the TV’s AV1 for a Cable TV box.
●For HDMI-compatible equipment, it is possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4)
by using HDMI cable (p. 92).
●Network connection p. 13 and p. 75
●Q-Link connection p. 84
●VIERA Link connection p. 84 and p. 85
●Please also read the manual of the equipment being connected.
11
Auto Setup
Search and store TV channels automatically.
●These steps are not necessary if the setup has been completed by your local dealer.
●Please complete connections (p. 10 and p. 11) and settings (if necessary) of the connected equipment before
starting Auto Setup. For details of settings for the connected equipment, read the appropriate manual.
1
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
●If the red LED shows on the TV, press the
Standby On / Off switch on the remote
control for at least 1 second to turn the TV
On.
Auto Setup will start to search for TV
channels and store them in the numbered
order as specified by the broadcasters.
●If “freesat Auto Setup” cannot be done
freesat Auto Setup
Searching
Signal Quality
Signal Strength
TV Channels Found
Radio Channels Found
Data Channels Found
0
0
completely
“FAQs” (p. 99)
10
10
8
2
1
Channels found, creating channel list
(freesat tuning)
EXIT
Auto Setup - DVB and Analogue
DVB Scan
CH 21
Analogue Scan
CH 21
This will take about 6 minutes.
CH
Channel Name
62
CBBC Channel
62
BBC Radio Wales
62
E4
62
Cartoon Nwk
29
BBC1
33
Free TV: 8
Pay TV: 0
Radio: 0
Searching
BACK/
RETURN
68
68
Type
Quality
Free TV
10
Free TV
10
Free TV
10
Free TV
10
Analogue
Analogue
Data: 0
Analogue: 2
Sending Preset Data
Please wait!
0%
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Enter your postcode
Enter Postcode for local channels including space
Postcode
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z
0 1 2 3 4 5 6 7 8 9
1
.!:#
4
ghi
7
pqrs
2
abc
5
jkl
8
tuv
to channel duplication.
(DVB and Analogue tuning)
If Q-Link, or similar technology (p. 86),
compatible recorder with analogue tuner
is connected, analogue channel setting is
automatically downloaded to the recorder.
(Digital channel setting is not downloaded.)
●If downloading has failed, you can download
later through the Setup Menu.
“Q-Link Download” (p. 34)
100%
Remote control unavailable
2
●Actual number of channels may differ due
3
def
6
mno
9
wxyz
0
●Your postcode is required to receive local
services and sort the channel order.
Please ensure to include a space when
entering your postcode.
●If you skip this step, the default postcode
(central London) will be set.
■How to enter the postcode
Set characters one by one
TV
select
set
●You can set characters by using numeric
buttons.
“Characters table for numeric buttons”
(p. 96)
Exit to go to next step
green
(continued to the next page)
12
3
Setup the wireless LAN connection
Setup the wireless LAN connection to enable the network service functions (p. 74).
(If you do not wish to use wireless LAN connection or the network service functions, skip this step.)
●To setup the wireless LAN connection, the Wireless LAN Adaptor (optional accessory) is required. For
the information about the Wireless LAN Adaptor
“Optional accessories” (p. 6)
●Confirm the encryption key, settings and positions of your access point before starting setup. For details,
read the manual of the access point.
●Please note that this TV does not support wireless public access points.
●To use a LAN cable instead of the Wireless LAN Adaptor p. 77
connect the Wireless LAN Adaptor to the USB 1 or 2 port
Start wireless LAN connection setup?
Yes
No
Internet
environment
Please connect the wireless LAN adaptor (DY-WL10) to a
USB terminal.
select “Yes”
You can setup the wireless LAN connection later
“Network Setup” (p. 78)
access
●To skip this step
EXIT
or select “No”
Quick Start
Guide
Access point
Wireless LAN Adaptor
(optional accessory)
Wireless LAN connection setup starts
access
WPS(Push button)
Search for access point
select
■WPS(Push button)
●If your access point supports WPS
(Push button), then select this option.
If not, select “Search for access point”.
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN Adaptor and
the access point.
●Ensure that your access point supports WPS for this setup.
●WPS: Wi-Fi Protected Setup
WPS(Push button)
1) Please press the ‘WPS’ buttton on the access
point until its light flashes.
2) When light is flashing select ‘Connect’ on TV.
If you are unsure, please check the instruction
manual of the access point.
Connect
●Auto Setup
Select the connection type
Connection Type
Please select netwok connection type.
■Search for access point
Access points found automatically are listed.
Select your desired access point
Available Access Points
No.
SSID
1
Access Point A
11n(2.4GHz)
2
Access Point B
11n(5GHz)
3
Access Point C
Wireless type
11n(5GHz)
Encrypt
Reception
access
select
highlighted access point
●To set manually (p. 79)
: Encrypted access point
Access the encryption key input mode
Encryption Key Setting
Connection will be made with the following settings:SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Access Point Settings
Encryption key
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
red
be displayed. It is recommended to select the encrypted access point.
Encryption key
B
V
b
v
yellow
●If the selected access point is not encrypted, the confirmation screen will
Please input the encryption key.
A
U
a
u
●To search access points again
●For the information of the
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
.!:#
4
ghi
7
pqrs
2
abc
5
jkl
8
tuv
Enter the encryption key of the access point
Set characters one by one
Store
select
3
BACK/
RETURN
def
6
mno
9
set
wxyz
0
●You can set characters by using numeric buttons.
“Characters table for numeric buttons” (p. 96)
Select “Yes”
Access Point Settings
Encryption key is set to:XXXXXXXX
select
set
Select ‘Yes’ to confirm.
Select ‘No’ to change.
Yes
No
●To re-enter the encryption key, select “No”.
●If the connection has failed, check the encryption key, settings and positions of your access point. And
then, follow the on screen instructions.
●If connection to the access point is successful, we recommend you perform the “Connection Test” to
confirm connection to the internet has been made. The “Connection Test” can be found in the Network
Setup menu (p. 78).
Exit to go to the next step
(continued to the next page)
13
Auto Setup
4
Input Owner ID
Owner ID
Please enter new PIN
PIN
Please enter your own choice of PIN number, name, etc. to help the police
to crack crime.
●Make a note of the PIN number in case you forget it. The PIN number
cannot be reset.
●You can input or change the Owner ID later. “Owner ID” (p. 56)
* * * *
EXIT
●To skip this step
●This step will be skipped in the Auto Setup after “Shipping Condition”
(p. 51) is performed.
■How to input Owner ID
Enter the PIN number (4 digits)
Owner ID
Please enter new PIN
PIN
* * * *
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
●Enter the PIN number twice at first
setting.
Enter your name, house number, and postcode, in that order
Select the item (NAME / HOUSE NO / POSTCODE)
Owner ID-Data Entry
PIN
NAME
HOUSE NO
POSTCODE
access
select
Set characters one by one
select
User input
NAME
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
.!:#
4
ghi
7
pqrs
2
abc
5
jkl
8
tuv
set
3
●You can set characters by using numeric
buttons.
“Characters table for numeric buttons”
(p. 96)
def
6
mno
9
wxyz
0
Return to select other items
BACK/
RETURN
●Select the next item and repeat the
operations.
Exit to go to next step
EXIT
(continued to the next page)
14
Select “Home”
5
Select “Home” viewing environment (highlight “Home” in yellow) to use in your home
environment.
Please select your viewing environment.
Home
Shop
select
set
(for shop display only)
“Shop” viewing environment is the demonstration
mode to explain main features of this TV.
Select “Home” viewing environment to use in
your home environment.
●You can return to viewing environment selection
screen at the stage of Shop confirmation screen
and Automatic Demo Off / On selection screen.
Shop
You have selected shop mode
Automatic Demo
Off
●To check channel list at-a-glance
“Using TV Guide” (p. 20)
●To edit or hide (skip) channels
“Tuning and Editing Channels” (p. 42 - 47)
●If tuning has failed, check the connection of the
Satellite cable, RF cable, and then, follow the on
screen instructions.
BACK/
RETURN
On
Select “Home”
Please select your viewing environment.
Home
Shop
●Auto Setup
Return to viewing environment selection
screen
Quick Start
Guide
Auto Setup is now complete and
your TV is ready for viewing.
■“Shop” viewing environment
select
set
Auto Setup is complete
●To change viewing environment later on, you
will need to initialise all settings by accessing
Shipping Condition.
“Shipping Condition” (p. 51)
Note
●If tuning has failed or to retune all channels “Auto Setup” (p. 40 and p. 41)
●If you wish to tune in other satellite channels “Auto Setup” in “Other Sat. Tuning Menu” (p. 49)
●To re-initialise all settings “Shipping Condition” (p. 51)
●If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
If you connect the Wireless LAN Adaptor later on, the confirmation screen will be displayed for the setup.
●To setup the Wireless LAN connection p. 78 and p. 79
Wireless LAN adaptor connection
Wireless LAN adaptor connected, do you want to
set it up?
No - Exit
Current network type : Wireless
Yes
No
15
Watching TV
1
Turn power on
2
Select the mode (freesat, DVB, Analogue or
Other Sat.)
(Press for about 1 second)
●Mains power On / Off switch should be On. (p. 9)
INPUT
TV
MENU ASPECT
EXIT
watch
IDE
GU
TV Selection
freesat
TV
DVB
select
Analogue
Displayed if Other Satellite
channels are tuned (p. 49)
●Also possible by pressing the TV button repeatedly on the remote control or
side panel of the TV. (p. 9)
Other Sat.
OPTION
STTL
ghi
pqrs
HOLD
abc
def
jkl
mno
tuv
103 ITV Wales
19:35
Coronation Street
19:30 - 20:00
Information banner appears whenever you select a
channel
●For details p. 17
freesat Channel List
For info press
Now
wxyz
LAST VIEW
3
Select a channel
up
down
or
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
freesat channel position numbers run in the
ranges 100 - 999 and 0100 - 0999.
●To select a three-digit channel position
number, e.g. 133
Volume
def
def
●To select a four-digit channel position
number, e.g. 0246
abc
ghi
mno
DVB and Other Sat. channel position
numbers run from 1 onwards.
Analogue channel position numbers run in
the ranges 0 - 99.
●To select a two or three-digit channel
position number, e.g. 39
TV
Note
●To watch pay-TV
wxyz
def
“Using Common Interface”
(p. 57)
■Select a channel using Information banner (p. 17)
It is possible to confirm the channel name and programme information by using the Information banner before changing
channels.
Display Information banner if it is
not displayed
While the banner is displayed,
select the channel
select channel
watch
●Possible to set display timeout in
“Banner Display Timeout” (p. 35).
■Select a channel using TV Guide (p. 20)
It is possible to confirm the channel and programme information by using the TV Guide (EPG) before changing channels.
Display
TV Guide
Select a current
programme or channel
select
IDE
GU
16
Select “View”
(DVB mode)
Eastender
19:30- 20:00
View
access
Timer Programming
●To use Timer Programming
select
watch
p. 22
■Other useful functions
Hold
HOLD
Freeze / unfreeze picture
Display Information banner
Display Information banner
●Also appears when changing a channel
Same programme available as HD broadcast
●For details, display the extra information
Channel type
if it is HDTV, Radio
or Data channel
Current time
Channel position
and name
TV mode
(
Example (freesat):
103 ITV Wales
Programme
Radio
Coronation Street
19:30 - 20:00
Mute
Encrypted
STTL
All DVB Channels
Select favourites
For info press
TEXT
Multi Audio
45
Example (Analogue):
A 3 ITV
Radio
19:35
All Analogue Channels
itv1
CH23
Mute
For info press
Encrypted
AD
Subtitles TEXT
NICAM
45
Channel number
“All Other Sat. Channels” or “Favourites1-4” (p. 50)
●To switch
blue
Example (Other Sat.):
S 103 ITV Wales
Coronation Street
19:30 - 20:00
Mute
Encrypted
Radio
AD
STTL
TEXT
Multi Audio
45
19:35
Now
STTL
All Other Sat. Channels
Select favourites
For info press
TEXT
Multi Audio
45
Mute
Sound mute On
Bad signal
Poor TV signal quality
Encrypted
Scrambled programme
AD
Audio Description service available
●This function can aid visually-impaired viewers by
adding an additional audio track to describe events
on-screen.
●For settings p. 33
STTL
Subtitle service available
TEXT
Teletext service available
Multi Audio
Multiple audio available
Stereo, Mono, NICAM
Audio mode
1 - 90
Off Timer remaining time
●For settings p. 19
●To confirm another tuned
channel name
●To watch the channel listed in the banner
●To hide
●Information on the next programme
(freesat, DVB, Other sat.)
●Watching TV
19:35
Also in
Now
AD
For info press
Now
Basic
blue
Example (DVB):
Radio
freesat Channel List
Features available / Message meanings
“All DVB Channels” or “Favourites1-4” (p. 45)
●To switch
Coronation Street
19:30 - 20:00
Mute
Encrypted
19:35
Also in
Progress time indicator of the selected programme
Programme Start /
Finish time
D 103 ITV Wales
)
EXIT
●To set display timeout
●Extra information
“Banner Display Timeout” (p. 35)
(press again to hide the banner)
(freesat, DVB, Other sat.)
●“AD”, “STTL”, “TEXT”, “Multi Audio” indications are displayed as
available on particular programmes, but may not be available for all
individual programmes being broadcast.
Display the extra information to confirm availability of these functions.
Example:
103 ITV Wales
19:35
Coronation Street
19:30 - 20:00
Now
freesat Channel List
Exit info
[AD]
AD
17
Watching TV
■Other useful functions
Display subtitles
■freesat, DVB or Other Sat. mode
Display / hide subtitles (if available)
STTL
●To change the language for DVB (if available)
“Preferred Subtitles” (p. 35)
■Analogue mode
Display subtitles
●To hide subtitles
STTL
EXIT
Note
●This is the same as switching to Analogue teletext service and selecting “P888” (subtitle service). (p. 27)
●You cannot change the channel when this function is active.
Aspect
ASPECT
Change the aspect ratio (image size)
Enjoy viewing the image at its optimum size and aspect.
Programmes usually contain an Aspect Control Signal (Widescreen signal, etc.), and the TV will choose the
aspect ratio automatically according to the Aspect Control Signal (p. 94).
■If you would like to change the aspect ratio manually
Display Aspect Selection list
ASPECT
While the list is displayed, select the mode
Aspect Selection
Auto
16:9
14:9
4:3
Zoom1
Zoom2
Zoom3
Select
Change
store
EXIT
RETURN
select
Aspect Selection list
●To change the mode using the ASPECT button only
ASPECT
Auto
16:9
14:9
4:3
Note
(Press repeatedly until you reach the desired mode)
The best ratio is chosen and the image expanded to fill the screen.
For details p. 94
Directly displays the image at 16:9
without distortion (anamorphic).
Displays the image at the standard 14:9
without distortion.
Displays the image at the standard 4:3
without distortion.
Zoom1
Zoom2
Zoom3
Displays a 16:9 letterbox or 4:3 image
without distortion.
Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
Displays a 2.35:1 letterbox (anamorphic)
image full-screen without distortion.
At 16:9, displays the image at its maximum
(with slight enlargement).
●Aspect is fixed to “16:9” when “Viewing Mode” is set to “Game” in the Picture Menu.
●Only “16:9” and “4:3” are available in PC input mode.
●Not available when the subtitle function is active.
●Not available in teletext service.
●Aspect mode can be memorized separately for SD (Standard definition) and HD (High definition) signals.
18
■Other useful functions
Display the selectable settings for the current status
Check or change the current
status instantly
OPTION
●To change
change
select
Multi Audio / AD (freesat mode)
Allows you to select between alternative language
or Audio Description for sound tracks (if available)
●Set Audio Description “Auto” in the Sound Menu
(p. 33) to select the audio description sound track.
In freesat mode, Audio Description cannot be
controlled separately from the audio description
sound track.
●This setting is not memorized and it will return to the
default setting once you exit the current programme.
Subtitle Language
(freesat, DVB or Other Sat. mode)
Allows you to select the language in which subtitles
should appear (if available)
●This setting is not memorized and it will return
to the default setting once you exit the current
programme.
NICAM (Analogue mode)
Switches NICAM sound (if available)
Sound Menu (p. 33)
Volume Correction
Adjusts volume of individual channel or input mode
Monaural Audio (DVB mode)
Allows you to select stereo / monaural (if available)
●This setting is not memorized and it will return to the
default setting once you exit the current programme.
Safely remove USB
●Takes this operation to remove the connected USB
device safely from the TV.
Last view
Switch to previously viewed
channel or input mode easily
●Watching TV
Audio Description (DVB mode)
Set to “Auto” if the programme has Audio Description
service, then you will hear an additional audio track to
describe events on screen
●To adjust the volume for Audio Description
“Audio Description Menu” (p. 33)
Basic
Multi Audio (DVB or Other Sat. mode)
Allows you to select between alternative language
for sound tracks (if available)
●This setting is not memorized and it will return to the
default setting once you exit the current programme.
●Press again to return to the present view.
LAST VIEW
Note
●Switching channel is not available while the recording of Timer Programming, Direct TV Recording or
One Touch Recording is in progress.
●Watching less than 10 sec. is not regarded as the previously viewed channel or input mode.
Off Timer
Turn the TV off automatically after a fixed period (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Display the menu
MENU
Select “Setup”
Main Menu
Picture
Select “Off Timer” and set the time
access
Sound
Setup
select
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
freesat Tuning Menu
Other Sat. Tuning Menu
Display Settings
Network Setup
1/2
Off
set
select
●To cancel Set to “Off” or turn the TV off.
●To display the remaining time Information banner (p. 17)
Note
●When the remaining time is within 3 minutes, the remaining time will flash on the screen.
19
Using TV Guide
TV Guide―Electronic Programme Guide (EPG) provides an on screen listing of the programmes currently
broadcast and the forthcoming broadcasts over the next seven days (depending on the broadcasters).
●When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time
before the TV Guide is completely shown.
freesat mode
EXIT
IDE
GU
BACK/
RETURN
OPTION
Select freesat
Display the Channel
Genre selection list
Select the genre and view TV Guide
Example:
Special Interest
Radio
Shopping
Gaming & Dating
Interactive
Regional
Favourites
TV Guide time
IDE
GU
or
Channel position
and name
select
access
■To view a channel list
of the selected genre
blue
programme types
and view a channel
list of the searched
programmes
yellow
■To search
programme titles
and view a list
of the searched
programmes
Wed 28 Oct 2009 10:46
Search
All Channels
1 BBC ONE
20:00 - 20:30 DIY SOS : We open in the Battersbys
D
D
D
D
D
D
D
101
102
103
104
105
Time:
BBC ONE
BBC 2W
BBC NEWS
BBCi
BBC THRE
106 BBC FOUR
107 BBC Radio
Also in
19:30
20:00
20:30
21:00
Eastender
DIY SOS
The Bill
Red Cap
Hot Wars
Holiday Program
Emmerdal.
Coronation Street
The Bill
10 O’ clock News BBC
Pepsi Char.
Good bye
Panorama
Spring watch
Coast
I’ m A Celebrity
Pop Idol
Rugby
15 To 1
Select channel
EXIT
Select programme
View / Timer Prog.
RETURN
GUIDE
21:30
Drama
Cinema
News
Shop
The Bill
Sports
Info
RETURN
●There might be some
programmes displayed as
greyed-out in TV Guide.
These are the Off-Air
programmes (non-running
programmes).
Page up
Page down
+24 hours
Search
Channel Genre
●If a programme exists in both HD and SD
Select “View”
broadcasts, the “View Options” screen will
be displayed to select HD or SD broadcast.
Eastender
19:30- 20:00
View
Timer Programming
●To use Timer Programming
Channel Genre
All Channels
Search
p. 22
(Channel Genre list)
101 BBC ONE
119 BBC HD
19:30-20:00 Wed 28 Oct 2009
19:30-20:00 Wed 28 Oct 2009
select
■To the previous day
red
●To list favourite channels
p. 43
■To the next day
(Search list)
select
type
view
Search Titles...
Movie
News and Factual
Entertainment
Sport
Children’s
watch
View Options
DIY SOS
select
genre
view
All Channels
Entertainment
News & Sport
.
.
.
select
watch
green
.
.
.
Search
Search Titles...
Movie
News and Factual
Entertainment
Sport
Children’s
Set characters one by one
(maximum: 19 characters)
(Search list)
select
“Search
Titles...”
access
Search
select
set
green
You can set characters by using numeric
buttons.
“Characters table for numeric buttons” (p. 96)
●All the programme titles including the word you set will be listed.
●Searching without any characters will list all programmes including current programmes.
yellow
20
Current date and time
Wed 28 Oct
-24 hours
Favourites
■To search
Programme
Some programmes may also be broadcast in HD
●You can select HD or SD broadcast before viewing or setting Timer Programming.
■To watch the programme
Select a current
programme or channel
view
TV Guide
TV Guide date
EXIT
select
Channel Genre Selection
All Channels
Entertainment
News & Sport
Movies
Lifestyle
Music
Children
Example:
■To return to TV
TV
p. 16
IDE
GU
1
2
3
INPUT
TV
.
.
.
.
DVB or Analogue mode
●This TV supports the GUIDE Plus+ system.
●The Gemstar branding partner will supply the rating informations in the programme information and the
recommended group in the Search list.
●DVB and Analogue channels are displayed on the same TV Guide screen. “D” means DVB channel and “A”
means Analogue channel. There will be no programme listings for Analogue channels.
INPUT
TV
1
Select DVB or Analogue
2
View TV Guide
p. 16
TV
EXIT
IDE
GU
IDE
GU
BACK/
RETURN
OPTION
Example:
TV Guide time
or
D: DVB
A: Analogue
Search
Wed 28 Oct
D
D
D
D
D
D
D 719 BBC Radi
Rugby
Select channel
EXIT
Select programme
Timer Programming
RETURN
-24 hours
+24 hours
access
■To view a
channel list of the
selected category
blue
■To search programme
types and view a
channel list of the
searched programmes
(DVB mode)
yellow
■To search
programme titles
and view a list
of the searched
programmes
(DVB mode)
yellow
15 To 1
Sports
Info
GUIDE RETURN
OPTION Select Advert
Search
Page up
Page down
Some programmes may
also be broadcast in HD
●You can select HD or
SD broadcast before
viewing or setting
Timer Programming.
Category
Channel position and name
●If a programme exists in both HD and SD
Select “View”
(DVB mode)
Eastender
19:30- 20:00
View
Timer Programming
●To use Timer Programming
Category
All Channels
All Channels
All DVB Channels
All Analogue Channels
Free DVB Channels
TV/Data DVB Channels
Favourites1
Favourites2
Favourites3
Favourites4
Search
select
watch
broadcasts, the “View Options” screen will
be displayed to select HD or SD broadcast.
(DVB mode)
p. 22
101 BBC ONE
119 BBC HD
19:30-20:00 Wed 28 Oct 2009
19:30-20:00 Wed 28 Oct 2009
select
■To the previous day
(Category list)
(DVB mode)
Only Analogue
channels are listed
red
select
category
view
●To list favourite channels
p. 45
■To the next day
(Search list)
select type
Search Titles...
Movie
News and Factual
Entertainment
Sport
Children’s
watch
View Options
DIY SOS
●Using TV Guide
select
Also in
Time: 19:30
20:00
20:30
21:00
Eastender
DIY SOS
Holiday News
1 BBC ONE
Hot Wars
Holiday Program
7 BBC THREE
Emmerdal.
Coronation Street
The Bill
14 E4
10 O’ clock News BBC
Pepsi Char.
Good bye
70 BBC FOUR
Panorama
Spring watch
Coast
72 BBC 2W
105 BBCi
I’ m A Celebrity
Pop Idol
News
■To watch the programme
Select a current
programme or channel
All Channels
1 BBC ONE
20:00 - 20:30 DIY SOS : We open in the Battersbys
Basic
Advertisement
IDE
GU
EXIT
Logo of the
Gemstar branding partner
TV Guide
Wed 28 Oct 2009
10:46
■To return to TV
Current date and time
TV Guide date Programme
view
(DVB mode)
green
.
.
.
Search
Search Titles...
Movie
News and Factual
Entertainment
Sport
Children’s
.
.
.
.
Set characters one by one
(maximum: 19 characters)
(Search list)
select
“Search
Titles...”
access
Search
select
set
green
You can set characters by using numeric
buttons.
“Characters table for numeric buttons” (p. 96)
●All the programme titles including the word you set will be listed.
●Searching without any characters will list all programmes including current programmes.
21
Using TV Guide
■Other useful functions
Timer Programming (freesat or DVB mode)
Timer Programming can remind you to watch a programme or record one on an external recorder or
a USB HDD.
Select the
forthcoming
programme
Select the function
(Ext Rec., USB HDD Rec. or Reminder)
Function
select
Ext Rec.
No.
D
store
Wed 28 Oct 2009 10:46
Timer Programming
Date
Channel Name
1 BBC ONE
DIY SOS
Guide
Guide
Wed 28 Oct
Start
End
20:00 20:30
(30 mi n. )
---
---
--/--
--:---:-(--- min.)
---
---
--/--
--:---:-(--- min.)
select LED will turn to orange if
LED
Timer Programming is set.
(Orange LED will flash if the recording of
Timer Programming is in progress.)
(Timer Programming screen)
Ext Rec. /
: to record the programme to the external recorder (Ext Rec.) or the
USB HDD Rec. USB HDD (USB HDD Rec.)
When the start time comes, the channel will be switched automatically
and the video and audio signals will be output. 2 mins. before the starting
time, a reminder message appears if you are watching TV.
Reminder
: to remind you to watch the programme
When you are watching TV, a reminder message appears 2 mins. before
the start time. Press the OK button to switch to the programmed channel.
set
---
---
--/--
--:---:-(--- min.)
---
---
--/--
--:---:-(--- min.)
■To check / change / cancel a timer programming event
■To return to TV Guide
“Timer Programming” (p. 53)
BACK/
RETURN
■If you select a current programme
A confirmation screen asking whether you wish to watch or record the programme will appear.
Select “Timer Programming” and set “Ext Rec.” or “USB HDD Rec.” to record from the time you finish
programming the timer event setting.
Eastender
19:30- 20:00
View
Timer Programming
select
access
■If a programme exists in both HD and SD broadcasts
The “Timer Options” screen will be displayed to select HD or SD broadcast.
Timer Options
DIY SOS
101 BBC ONE
119 BBC HD
set
Timer Programming
Function
19:30-20:00 Wed 28 Oct 2009
19:30-20:00 Wed 28 Oct 2009
Ext Rec.
select
No.
D
Wed 28 Oct 2009 10:46
Date
Channel Name
1 BBC ONE
DIY SOS
Start
End
Wed 28 Oct
20:00 20:30
(30 mi n. )
---
---
--/--
--:---:-(--- min.)
---
---
--/--
--:---:-(--- min.)
---
---
--/--
--:---:-(--- min.)
---
---
--/--
--:---:-(--- min.)
Guide
Guide
(Timer Programming screen)
“ ” will be displayed if HD broadcast is set.
Note
●This function is not available in Analogue mode.
●Timer Programming can store up to 15 events.
●Timer Programming reminder messages will remain displayed until one of the following occurs:
• You press the OK button to view the programme or the EXIT button to cancel the reminder.
• The timer programming event that the reminder is set for ends.
●No other channel can be selected while the recording of Timer Programming is in progress.
●When recording programmes, be sure to make the proper settings on the recorder connected to the TV.
If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 86) and the “Link
Settings” (p. 34) are completed, no setting of the recorder is required. Also read the manual of the recorder.
●When recording programmes to the USB HDD, be sure to register the USB HDD and enable it for recording in
the “USB HDD Setup” (p. 62).
22
Guide link programming (Timer Programming from the TV Guide signal)
Guide link programming is Timer Programming which is controlled by information from the TV Guide; if
programme start and end times are changed by the broadcaster, the timer programming event will follow the
change.
A Split Programme programming is a Guide link programming which is interrupted by one or more other
programmes.
Note that Guide link programming (including Split Programme programming) only works reliably if correct
information is received from broadcasters.
Timer Programming
No.
Func t i o n
Ext Rec.
D
Reminder
D
-- -
Date
Guide
Guide
Guide
72 BBC 2W
<T IM E R>
Ext Rec.
Ext Rec.
1 BBC ONE
DIY SOS
14 E 4
The Bill
D
1 BBC ONE
Red Cap
---
“Guide” is displayed if
the timer is set from the
TV Guide
(Guide link programming)
Wed 28 Oct 2009 10:46
Channel Name
Start
End
Wed 28 Oct
20:00 20:30
(30 min.)
Wed 28 Oct
21:00 22:30
(90 min.)
Wed 28 Oct
22:45 23:00
(15 min.)
Thu 29 Oct
10:30 11:30
(60 min.)
--/--
--:---:-(--- min.)
“ ” or “ ” will be displayed in the TV Guide if Timer
Programming is set as the Guide link programming.
TV Guide
Wed 28 Oct 2009
10:46
1
7
14
70
72
105
D 719
D
D
D
D
D
D
“S/P” is displayed if the timer
is set from the TV Guide
(Timer Programming screen) and the programme is a
Split Programme
S/P
Search
Wed 28 Oct
All Channels
1 BBC ONE
20:00 - 20:30 DIY SOS : We open in the Battersbys
Time: 19:30
20:00
20:30
21:00
Eastender
DIY SOS
Holiday News
BBC ONE
BBC THREE
Hot Wars
Holiday Program
E4
Emmerdal.
Coronation Street
The Bill
BBC FOUR
10 O’ clock News BBC
Pepsi Char.
Good bye
BBC 2W
Panorama
Spring watch
Coast
BBCi
I’ m A Celebrity
Pop Idol
News
BBC Radi
Rugby
15 To 1
Sports
Note
●If you edit the start time or end time of a Guide link programming event by more than 10 minutes, it will no
longer follow the broadcaster’s changes to the start or end time. The start and end times will become fixed.
any channels between the interrupted programmes.
●The Split Programme programming event for Reminder will be cleared by pressing the OK button once to view.
●The Split Programme programming event for Reminder will switch to the programmed channel by pressing
Basic
●Whilst making the Split Programme programming event for Ext Rec. or USB HDD Rec., you cannot record
the OK button even if it is between the interrupted programmes.
●The Split Programme programming does not work if the separated parts are broadcast on different channels.
Select the programme
View details
TV Guide
Wed 28 Oct 2009
10:46
select
Wed 28 Oct 2009
DIY SOS
BBC ONE
20:00 - 20:30, 30 min.
Details
EXIT
Timer Programming
Return to list
RETURN
●Press again to return to TV Guide.
View advertisement (DVB or Analogue mode)
●Using TV Guide
View details of the programme (freesat or DVB mode)
Enter your postcode when using this function for the first time
“Postcode” in “GUIDE Plus+ Settings” (p. 36)
If you have already entered your postcode in “Auto Setup” - when first using the TV (p. 12), you do not have to
enter it again.
If you enter an incorrect postcode for your area, or no postcode is entered, advertisements may not be
displayed correctly.
Display advertisement information
OPTION
●To display the latest advertisement, you will need to update the information.
To update the information continuously, the TV must be left in Standby mode at night.
■To change advertisements
■To return to TV Guide
OPTION
or
BACK/
RETURN
Note
●Some advertisements are for future programmes.
In this case it is possible to use the Guide link programming function (above).
●The advertisements displayed on the TV Guide are sent from the GUIDE Plus+ system so that they cannot
be deleted manually or will not be lost even when the TV is turned Off with Mains power On / Off switch.
23
Using TV Guide
Other Sat. mode
In Other Sat. mode, TV Guide is not available. In stead, Channel List will appear.
●To tune in Other Sat. Channels
p. 49
1
Select Other Sat.
2
Display the Channel List
p. 16
TV
INPUT
TV
EXIT
IDE
GU
IDE
GU
BACK/
RETURN
All Other Sat. Channels
2 freesatHome
3 freesatSSU
4 Brit Shorts
5 HINRG LOWNRG
6 WELL Class
7 GROOVE
8 -
3
Select the channel
watch
select
TV
■To return to TV
24
or
IDE
GU
EXIT
Viewing Teletext
You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster)
●The availability of teletext services for a programme is indicated by “TEXT” in the information banner.
Information banner (p. 17)
D 1 BBC ONE Wales
20:35
Coronation Street
19:30 - 20:00
Now
All DVB Channels
Select favourites
For info press
TEXT
Displayed if programme has teletext service
Digital teletext (MHEG)
Digital teletext services
Digital teletext services differ greatly from analogue teletext.
When you switch to a digital teletext service, the images you see can contain graphics and text, laid out and
controlled in a manner decided by the broadcaster.
INPUT
TV
1
Select freesat or DVB
p. 16
TV
●freesat and DVB programmes have digital teletext services
(MHEG).
17:51 28 Feb
BACK/
RETURN
abc
def
ghi
jkl
mno
In all cases, it is possible to navigate the pages using buttons on the
remote control, but because the commands available must apply to all
manufacturers of digital equipment, some on screen commands may
not correspond exactly to the remote control buttons.
For example:
pqrs
tuv
wxyz
●When “select” or “go” is displayed
TEXT
●Viewing Teletext
●Using TV Guide
3
How to use
TEXT
Basic
2
Switch to Teletext
●When “◄”, “►”, “▲”, “▼” symbol is displayed
●When “back key” is displayed
BACK/
RETURN
●When the key words are displayed on colour bar
●When options with numbers are displayed
TV
■To return to TV
red green yellow blue
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
TEXT
Note
●As soon as you switch to a digital channel with links to a teletext service,
software is downloaded in the background to enable the teletext function.
This means that when switching to a digital channel, you should wait for
approximately 5 seconds before pressing the TEXT button - this will allow
the software to download. If you press the TEXT button before download is
complete, it will be ignored and you will have to press the TEXT button again
when the download is complete.
●While navigating digital teletext, you will find there is a short delay when
moving between pages while the page downloads. There is often a prompt
shown somewhere on the page (for example “Loading”) to let you know that
this is happening.
25
Viewing Teletext
Analogue teletext
Analogue teletext services
Analogue teletext services are the text information provided by the broadcasters.
The features may vary depending on the broadcasters.
What is FASTEXT mode?
In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”, p. 27)
■To change mode
“Teletext” in the Setup Menu (p. 35)
Select Analogue or Other Sat.
1
INPUT
TV
p. 16
●Other Sat. programmes are digital broadcasts. The operations
TV
of the teletext services, however, are equal to Analogue teletext
service.
MENU
EXIT
Switch to Teletext
2
TEXT
Sub page number
●Displays the
<< 01 02 03 04 05 06 07
Current
page
number
index page
(content varies
depending on the
broadcasters)
jkl
mno
pqrs
tuv
wxyz
TELETEXT
INFORMATION
Select the page
3
def
ghi
Time / date
Colour bar
TEXT STTL INDEX HOLD
abc
>>
17:51 28 Feb
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
up
or
down
■To adjust contrast
■To return to TV
or
green yellow blue
red
(Corresponds to the colour bar)
As the blue bar is displayed
MENU
(press twice)
EXIT
Reveal hidden data
Reveal hidden words e.g. quiz page answers
MENU
●To rehide
red
red
FULL / TOP / BOTTOM
(TOP)
(BOTTOM)
MENU
green
(Expand the TOP half)
HOLD
Stop automatic updating
(If you wish to hold the current page without updating)
HOLD
●To resume HOLD
26
(Expand the BOTTOM half)
Normal (FULL)
INDEX
Return to the main index page
INDEX
Subtitles
View a favourite page stored
●Factory setting is “P888” (subtitle service) on the blue button (List mode).
STTL
View in multi window
Watch TV and Teletext in two windows at once
●Operations can be made only in Teletext screen.
●Each time pressed: Teletext
TV and Teletext
TEXT
TV
Store frequently viewed pages
(List mode only)
●If you wish to use Subtitles,
As page is
displayed
do not change number on
blue button.
press
and
hold
Corresponding
coloured button
Basic
Store frequently viewed pages in the colour bar
The number changes to white.
●Viewing Teletext
■To change stored pages
Enter new page number
Coloured button
you want to change
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
press
and
hold
View sub page
View sub page (Only when teletext is more than one page)
Appears at top of
the screen
■To view specific sub page
Enter the
4-digit number
MENU
blue
example: P6
mno
●Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
Watch TV while waiting for update
View the TV picture while searching for a teletext page
Teletext automatically updates itself when new information becomes available.
Changes to TV screen temporarily
View the updated page
P108
MENU
yellow
Appears when
updating is
completed
yellow
(You cannot change the channel.)
●The news page provides a function that indicates arrival of latest news (“News Flash”).
27
Watching External inputs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the AV input.
●To connect the equipment
p. 11 and p. 92
The Remote Control is capable of operating some functions of selected external equipment.
1
Turn the TV on
■When connecting with SCART as example 2 or 3 (p. 11)
Receives input signals automatically when playback starts
●Input signals are automatically identified by the SCART (pin 8) terminal.
●This function is also available for HDMI connections (p. 92).
■If input mode is not switched automatically
Perform
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
REC
2
Display the Input select menu
3
Select the input mode connected to the equipment
TV
AV
Input Selection
AV1
AV2/S
AV3
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
Media Server
select
watch
●You can also select the input using the AV button on the remote
control or the side panel of the TV.
Press the button repeatedly until the desired input is selected.
●You cannot select “Media Server” using the AV button on the side panel of
the TV.
●In order to switch between AV2 and AV2S, move the indicator by pressing
left and right cursor button.
●You can label or skip each input mode “Input Labels” (p. 55)
Skipped inputs will not be displayed when the AV button is pressed.
PROGRAMME
DVD/VCR
and
●Check the setup of the equipment.
INPUT
TV
AV
4
View
Displays the selected mode
TV
■To return to TV
TV
28
Note
●If the external equipment has an aspect adjustment function, set it to “16:9”.
●For details, see the manual of the equipment or ask your local dealer.
Screen display
Terminal
Manual input
(
default setting
in “Input Labels”
Auto input
mode or
(EC
VIERA Link )
)
AV1
AV2
AV3
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
AV1
AV1-RGB
AV2
AV2-S-Video
AV2-RGB
AV3
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
EC/HDMI1
EC/HDMI2
EC/HDMI3
EC/HDMI4
EC/AV2
EC/AV1
EC/AV2-S-Video
EC/AV1-RGB
EC/AV2-RGB
―
―
―
●Applicable for ●Applicable ●Applicable ●Applicable
EC mode and for
for
for
VIERA Link
VIERA Link VIERA Link VIERA Link
●If the above information is permanently displayed on the top left of the screen, press the
Operating the equipment with the TV remote control
button to clear.
Basic
●Watching External inputs
The Panasonic equipment connected to the TV can be directly operated with the below buttons of
this TV remote control.
Selection Switch for operating the connected equipment
Select “DVD/VCR” to operate Panasonic DVD Recorder, DVD Player, Player
theatre, Blu-ray Disc theatre or VCR
DVD/VCR TV
“How to change the code for the type of the equipment” (see below)
Select “TV” to use USB HDD Recording, Media Player or VIERA Link
“USB HDD Recording” (p. 64)
“Media Player” (p. 70)
“VIERA Link Control” (p. 90)
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD / video content
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD / video content: Skip to the previous track or title
(not available for the operation of USB HDD Recording)
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD / video content: Skip to the next track or title
(not available for the operation of USB HDD Recording)
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
PROGRAMME
Channel Up / Down
Select channel
REC
Record
Start recording
■How to change the code for the type of the equipment
Each type of the Panasonic equipment has its own remote control code.
Please change the code according to the equipment you want to operate.
Set the position to “DVD/VCR”
Press and hold
DVD/VCR
TV
during the following operations
Enter the appropriate code,
see table below
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Type of the equipment
DVD Recorder, DVD Player
Player theatre, Blu-ray Disc theatre
VCR
Press
Code
70 (default)
71
72
Note
●Confirm if the remote control works correctly after changing the code.
●The codes may be reset to default values if batteries are replaced.
●Some operations may not be possible on some equipment models.
29
How to Use VIERA TOOLS
You can access some special features easily by using the VIERA TOOLS function.
●For “VIERA Link Control” and “Pause Live TV” functions to operate correctly, ensure the connections and settings
are completed.
“Summary of Q-Link and VIERA Link features” (p. 84 and p. 85), “Preparations” (p. 87)
After connection, turn the equipment on and then switch the TV on.
●For “Photo”, “Video” and “Music” functions to operate correctly, ensure the device has photo or video data on it
and insert it into the SD Card slot or USB port properly.
”Using Media Player” (p. 66)
EXIT
TO
VIERA OLS
1
2
Display icons of the feature
TO
VIERA OLS
Select a feature
select
access
VIERA Link Control
3
Follow the operations of each feature
●VIERA Link Control “VIERA Link Control” (p. 90)
When two or more compatible equipment are connected, a selection screen
will be displayed.
Please select the correct description and access.
●Pause Live TV
“Pause Live TV” (p. 89)
●Photo
“Photo mode” (p. 68)
When two or more available devices are connected, a selection screen will be
displayed.
Please select the correct description and access.
TV
●Video
“Video mode” (p. 70)
■To return to TV
EXIT
or
When two or more available devices are connected, a selection screen will be
displayed.
Please select the correct description and access.
TO
VIERA OLS
●Music
“Music mode” (p. 73)
When two or more available devices are connected, a selection screen will be
displayed.
Please select the correct description and access.
●Media Server
“Using DLNA® features” (p. 80)
Note
●If the selected feature is not available, the demonstration to explain how to use it
30
can be displayed. Press the OK button to view the demonstration after selecting the
unavailable feature.
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions.
MENU
EXIT
1
Display the menu
●Displays the functions that can be set
MENU
2
Select the menu
(varies according to the input signal)
access
Main Menu
Picture
Sound
Setup
BACK/
RETURN
select
Select the item
3
Example (Picture Menu):
1/2
Dynamic
select
Warm
Off
Off
Basic
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Vivid Colour
C.A.T.S.
Adjust or select
4
Example (Picture Menu):
1/2
Dynamic
change
store or access
(Required by
some functions)
Warm
Off
Off
■Choose from among
TV
■To return to TV
at any time
EXIT
■To reset the settings
●To reset the picture settings only
alternatives
Number and positions of alternatives
Colour Balance
Normal
Changed
■Adjust using the slide bar
■To return to
the previous
screen
BACK/
RETURN
Sharpness
“Reset to Defaults” in the
Picture Menu (p. 32)
●To reset the sound settings only
“Reset to Defaults” in the
Sound Menu (p. 33)
●To initialize all settings
“Shipping Condition” in the
Setup Menu (p. 51)
●How to Use Menu Functions
●How to Use VIERA TOOLS
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Vivid Colour
C.A.T.S.
Moved
■Go to the next screen
Child Lock
Access
Displays the next screen
■To change
menu pages
up
down
■Enter characters by free input menu
You can enter names or numbers freely for some items.
Set characters one by one
User input
Name
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
.!:#
4
ghi
7
pqrs
2
abc
5
jkl
8
tuv
3
def
6
select
Store
BACK/
RETURN
set
mno
9
wxyz
0
●You can set characters by using numeric buttons.
“Characters table for numeric buttons” (p. 96)
31
How to Use Menu Functions
■Menu list
Menu
Picture
32
Item
Adjustments / Configurations (alternatives)
Viewing Mode
Basic picture mode (Dynamic / Normal / Cinema / True Cinema / Game / Photo /
Professional1 / Professional2)
In each Viewing Mode, Contrast, Brightness, Colour, Sharpness, Tint, Colour Balance,
Vivid Colour, C.A.T.S., P-NR and 3D-COMB can be adjusted and stored to suit your
particular viewing requirement.
●Set for each input signal.
Dynamic
: Provides enhanced picture contrast and sharpness when viewing in a
bright room.
Normal
: Recommended for viewing under normal ambient room lighting
conditions.
Cinema
: For watching movies in a darkened room with the improved performance
of contrast, black and colour reproduction
True Cinema: Precisely reproduces the original quality of the image without any revision.
Game
: Fast response signal specifically to provide suitable images for playing
games
●Not valid on TV mode
●A continuous record of time spent using Game mode can be displayed
in the top right of the screen.
“Playing Time Display” (p. 35)
Photo
: Set “Reversal Film” to “On” to provide the suitable image quality for
photos
●For HDMI input, Media Player and Network service operations
Professional : Allows you to set the professional picture settings in “Advanced Settings”,
1/2
“Lock Settings” and “Copy Adjustment”
p. 60
●This mode is available only when “Advance(isfccc)” in the Setup Menu
is set to “On”.
●Not valid on VIERA CAST
●If the certified professional dealer sets these modes, “Professional1”
and “Professional2” may be displayed as “isf Day” and “isf Night”.
Contrast, Brightness,
Colour, Sharpness
Increases or decreases the levels of these options according to your personal preference
Tint
With an NTSC signal source connected to the TV, the picture hue can be adjusted to
suit your taste
●For NTSC signal reception only
Colour Balance
Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)
●Not valid when “Viewing Mode” is set to “True Cinema”, “Professional1” or
“Professional2”.
Vivid Colour
Automatically adjusts colours to vivid ones (Off / On)
●Not valid on PC signal.
●Not valid when “Viewing Mode” is set to “Professional1” or “Professional2”.
Reversal Film Effect
Provides the picture effect such as the reversal film (Off / On)
●This function is available when “Viewing Mode” is set to “Photo”.
C.A.T.S.
Contrast Automatic Tracking System (Automatic Brightness Control function)
Adjusts picture settings automatically dependent on ambient lighting conditions
(Off / On)
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise and flicker noise in the contoured parts of
a picture (Off / Min / Mid / Max)
●Not valid on PC signal.
●Not valid when “Viewing Mode” is set to “Professional1” or “Professional2”.
3D-COMB
Makes still or slow moving pictures look more vivid (Off / On)
●Occasionally, whilst viewing still or slow moving pictures, colour patterning may be seen.
Set to “On” to display sharper and more accurate colours.
●Not valid on RGB, S-Video, Component, PC, HDMI and Media Player
Picture Display
Turns the screen off when you select “Off” (Off / On)
●The sound is active even if the screen turns off.
●Press any button (except Standby) to turn the screen on.
●This function is effective in reducing power consumption when listening to the sound
without watching the TV screen.
Reset to Defaults
Press the OK button to reset the present Picture Viewing Mode to the default settings
Menu
Item
Mode
Bass
Treble
Equalizer
Balance
Headphone Volume
Adjustments / Configurations (alternatives)
Selects the basic sound mode (Music / Speech / User)
●The selected mode affects all input signals.
Music: Improves sound quality for watching music videos, etc.
Speech: Improves sound quality for watching news, drama, etc.
●In Music and Speech modes, you can adjust “Bass” and “Treble” settings, and those
settings will be stored for each mode.
User: Adjusts the sounds manually by using the equalizer to suit your favourite sound quality.
●For the User mode, “Equalizer” will appear on the Sound Menu instead of “Bass” and
“Treble”. Select the “Equalizer” and adjust the frequency. “Equalizer” (below)
Increases or decreases level to enhance or minimise lower, deeper sound output
Increases or decreases level to enhance or minimise sharper, higher sound output
Adjusts the frequency level to suit your favourite sound quality
●This function is available when “Mode” is set to “User”.
●Select the frequency and change the frequency level by using the cursor button.
●If you want to enhance the bass sound, raise the level of the lower frequency. If you
want to enhance the treble sound, raise the level of the higher frequency.
●To reset the levels of each frequency to the default settings, select the “Reset to
Defaults” by using cursor button, and then press the OK button.
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Adjusts the volume of individual channel or input mode
Speaker Distance to
Wall
Adjusts the low frequency sound (Over 30cm / Up to 30cm)
●If the gap between the TV and wall is over 30 cm, “Over 30cm” is recommended.
●If the gap between the TV and wall is within 30 cm, “Up to 30cm” is recommended.
Preferred Multi Audio
Selects the preferred language for digital channel multi audio (depending on the
broadcaster) (English / Welsh / Gaelic)
NICAM
Near Instantaneous Companded Audio Multiplex
Reproduces NICAM stereo sound (Off / On)
●Off if reception is poor (FM monaural sound)
●Analogue mode only
SPDIF Selection
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal
(Auto / PCM)
Auto : Dolby Digital Plus and Dolby Digital are output as Dolby Digital Bitstream.
MPEG is output as PCM.
PCM : Digital output signal is fixed to PCM.
●For freesat, DVB, Other Sat., Network video contents (p. 81) or Video mode (p. 70)
MPEG Optical Level
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT terminal as the initial
setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)
●Normally, MPEG sound is larger comparing with the other types of audio track.
●For freesat, DVB or Other Sat. mode
HDMI1 / 2 / 3 / 4 Input
Select to fit the input signal (Digital / Analogue) (p. 97)
Digital
: When sound is carried via the HDMI cable connection
Analogue : When sound is not carried via the HDMI cable connection
●HDMI input mode only
Audio Description Menu
Audio Description
Useful for visually-impaired viewers (Off / Auto)
Set to “Auto” to activate the description sound track if available
●The availability of audio description sound track is indicated by “AD” in the information
banner (p. 17).
●For freesat or DVB mode
Volume
Adjusts the volume for Audio Description
●DVB mode only
Speakers
Set to “On” to activate the description sound track from TV speakers (Off / On)
●DVB mode only
Headphones
Set to “On” to activate the description sound track from headphones (Off / On)
●DVB mode only
Reset to Defaults
●How to Use Menu Functions
Volume Correction
Basic
Sound
Surround
Surround sound settings (Off / V-Audio / V-Audio Surround / V-Audio ProSurround)
V-Audio : Provides a dynamic enhancer of width to simulate improved spatial effects
V-Audio Surround : Provides a dynamic enhancer of width and depth to simulate
improved spatial effects
V-Audio ProSurround : Provides a more progressive enhancer and reverberation to
simulate improved spatial effects.
Press the OK button to reset the present Sound Mode, Balance, Headphone Volume
and Surround to the default settings
●A different menu will be displayed when “Advance(isfccc)” in the Setup Menu is set to “On” or in the mode of PC
input, Media Player or Network service operations. (p. 59 - 61, 67 - 73 and p. 82)
●Only available items can be selected.
33
How to Use Menu Functions
Menu
Item
Timer Programming
Sets a timer to remind watching or record forthcoming programmes (p. 52)
Off Timer
Sets the time until the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 19)
USB HDD Setup
Register the connected USB HDD and makes the settings for the recording (p. 62)
Link Settings
Setup
VIERA Link
Sets to use VIERA Link functions (Off / On) (p. 87)
HDMI Content
Detection
Adjusts the picture settings according to the content type signal from the connected
equipment via HDMI cable (Off / Auto)
●This function is available if the connected equipment supports HDMI Content Type.
●The content type information will be displayed for several seconds when this function
works.
Q-Link
Selects which AV terminal is to be used for data communication between this TV and a
compatible recorder (AV1 / AV2) (p. 86)
●Select the connected terminal to the recorder even it is not compatible with Q-Link.
AV1 / AV2 out
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
●Monitor: Image displayed on screen
●Component, PC and HDMI signals cannot be outputted.
Standby Power
Save
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption (Off / On) (p. 88)
●This function is available when “VIERA Link” is set to “On”.
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption (Off / On (With reminder) / On (No reminder)) (p. 88)
●This function is available when “VIERA Link” is set to “On”.
Q-Link Download
Downloads analogue channel information to a Q-Link compatible equipment
connected to the TV
Child Lock
freesat Tuning Menu
DVB Tuning Menu
34
Adjustments / Configurations (alternatives)
Locks a channel / AV input to prevent access to it (p. 54)
Favourites Edit
Creates a list of favourite freesat channels (p. 43)
Channel List
Skips the unwanted freesat channels (p. 43)
Auto Setup
Automatically sets the freesat channels received in the area (p. 40)
Signal Condition
Checks the freesat signal condition (p. 43)
Favourites Edit
Creates a list of favourite DVB channels (p. 45)
Channel List
Skips the unwanted DVB channels or edits DVB channels (p. 45)
Auto Setup
Automatically sets the DVB channels received in the area (p. 41)
Channel Sorting
by Region
Automatically sorts tuned channels according to the available region (p. 44)
Manual Tuning
Sets the DVB channels manually (p. 44)
Update Channel
List
Updates DVB Channel List while keeping your settings (p. 46)
New Channel
Message
Selects whether to give a notification message when a new DVB channel is found
(Off / On) (p. 46)
Signal Condition
Checks the DVB signal condition (p. 46)
Menu
Item
Adjustments / Configurations (alternatives)
Analogue Tuning Menu
Auto Setup
Automatically sets the Analogue channels received in the area (p. 41)
Manual Tuning
Sets the Analogue channels manually (p. 47)
Favourites Edit
Creates a list of favourite Other Satellite channels (p. 50)
Channel List
Skips the unwanted Other Satellite channels or edits Other Satellite channels
(p. 50)
Auto Setup
Automatically sets the Other Satellite channels received in the area (p. 49)
Manual Tuning
Sets the Other Satellite channels manually (p. 48)
●Please consult the received satellite broadcasting companies for the setting.
Add New Channels
Adds new Other Satellite channels to Channel List (p. 49)
Signal Condition
Checks the condition of Other Satellite signals (p. 48)
Teletext
Analogue teletext display mode (FASTEXT / List) (p. 26)
Preferred Subtitles
Selects the preferred language for digital channel subtitles (depending on the
broadcaster) (English / Welsh / Gaelic)
●To display subtitles p. 17
Input Labels
Labels or skips each input terminal (p. 55)
Banner Display
Timeout
Sets how long the Information banner (p. 17) stays on screen
(0 (No display) / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 seconds)
Playing Time Display
Set to “On” to display a continuous record of time spent using Game mode every
30 mins (Off / On)
●This function is available when “Game” is selected in “Viewing Mode” (p. 32).
Radio Mode
Sets the timer for turning off the screen automatically when a radio channel is
selected (Off / 5 / 10 / 15 / 20 seconds)
●The sound is active even if the screen turns off.
●Press any button (except Standby) to turn the screen on.
●This function is effective in reducing power consumption when listening to a
radio channel.
Network Setup
Sets the network setting to use in your network environment (p. 76)
DivX® VOD
Displays DivX VOD registration code (p. 95)
Advance(isfccc)
Enables the advanced picture settings (Off / On)
●Set to “On” to enable the mode of “Professional1” and “Professional2” in
“Viewing Mode”.
●Set to “On” to display the advanced items in the Picture Menu - “Advanced
Settings”, “Lock Settings” and “Copy Adjustment”. “Copy Adjustment” will be
displayed when “Viewing Mode” is set to “Professional1” or “Professional2”.
●“isfccc” is the picture setting for the certified professional dealer. For details,
consult your local dealer.
●How to Use Menu Functions
Display Settings
Skips the unwanted Analogue channels or edits Analogue channels (p. 47)
Basic
Other Sat. Tuning Menu
Setup
Channel List
●A different menu will be displayed when “Advance(isfccc)” in the Setup Menu is set to “On” or in the mode of PC
input, Media Player or Network service operations. (p. 59 - 61, 67 - 73 and p. 82)
●Only available items can be selected.
35
How to Use Menu Functions
Menu
Item
System Menu
USB Keyboard
Layout
Shipping Condition
Owner ID
Common Interface
System Update
Software Licence
System Information
Adjustments / Configurations (alternatives)
Selects the language that your USB Keyboard supports
●Use a USB Keyboard to enter characters in VIERA CAST (p. 83).
●Characters may not be displayed correctly on the TV screen depending on the
connected keyboard or the keyboard layout setting.
Resets all settings, for example, when moving house (p. 51)
Inputs the owner ID (p. 56)
Uses include to watch pay-TV (p. 57)
Downloads new software to TV (p. 58)
Displays the software licence information
Displays the system information of this TV
GUIDE Plus+
Settings
Postcode
Sets your postcode to display advertisements in the GUIDE Plus+ system (p. 23)
System
Information
Displays the system information of the GUIDE Plus+ system
Intelligent Frame
Creation
24p Smooth Film
Setup
Resolution Enhancer
Other Settings
Power on Preference
Power on Channel
List
Auto Standby
Power Save
16:9 Overscan
DVI Input Setting
Automatically compensates the picture frame rate and removes juddering
movements to make the images smooth and clear (Off / Mid / Max)
●This function is not available for selection (default to “Off”) when “Viewing
Mode” is set to “Game” or in the mode of PC input, photo or Network service
operations.
Automatically compensates the picture frame rate to make the 24p source movie
images smooth (Off / Mid / Max)
●This is available only for 24p signal input and displayed instead of
“Intelligent Frame Creation”.
●This function is not available for selection (default to “Off”) when “Viewing Mode”
is set to “Game” or in the mode of PC input, photo or Network service operations.
Enhances the picture resolution to make the image sharper (Off / Mid / Max)
●This function is available for SD (Standard definition) signal.
●As for HD (High definition) signal, this function is available when aspect mode is
set to 16:9 (16:9 Overscan is set to “On”) or Zoom.
●Not valid on PC, VIERA CAST and Media Player
Automatically selects the input when the TV is turned on (TV / AV)
Set to “TV” to view picture from TV tuner.
Set to “AV” to view input from an external equipment connected to a SCART
terminal, e.g. cable TV box.
●The external equipment must be switched on and sending a control signal for
automatic switching at power on to occur.
Automatically selects All Channels or Favourites list in the Information banner
(p. 17) when the TV is turned on (All Channel List / Last)
Set to “All Channel List” to display all the channels.
Set to “Last” to display the one you selected last time.
●Not available on freesat or analogue mode
Sets the time the TV automatically goes to Standby mode when no operation is
performed for the selected times (Off / 2 / 4 hours)
●Starting Timer Programming automatically does not affect this function.
●Automatic input switching with the connected equipment affects this function and
time-count will be reset.
●The notification message will appear 3 minutes before going to Standby mode.
Reduces brightness of picture to economise on power consumption (Off / On)
Selects the screen area displaying the image (Off / On)
On : Enlarges the image to hide the edge of the image.
Off : Displays the image in the original size.
●Set to “On” if noise is generated on the edge of the screen.
●This function is available when aspect is set to Auto (16:9 signal only) or 16:9.
●This function can be memorized separately for SD (Standard definition) and HD
(High definition) signals.
Changes the black level in the image for HDMI input mode with DVI input signal
manually (Normal / Full)
●When the DVI input signal from the external equipment, especially from PC, is
displayed, the black level may not be suitable. In this case, select “Full”.
●The black level for HDMI input signal will be adjusted automatically.
●For HDMI input mode with DVI input signal only
●A different menu will be displayed when “Advance(isfccc)” in the Setup Menu is set to “On” or in the mode of PC
input, Media Player or Network service operations. (p. 59 - 61, 67 - 73 and p. 82)
●Only available items can be selected.
●If “Demo Settings” item is displayed in the Setup Menu, the TV is in “Shop” viewing environment.
36
To return to “Home” viewing environment initialise all settings by accessing Shipping Condition.
”Shipping Condition” (p. 51)
■Overview (Picture, Sound)
●How to operate
p. 31
Main Menu
Picture
Sound
Setup
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Vivid Colour
Reversal Film Effect
Picture Menu
C.A.T.S.
P-NR
3D-COMB
Picture Display
Reset to Defaults
1/2
Dynamic
Available in NTSC
Warm
Off
Off
2/2
Off
Off
Off
On
Reset
(p. 32)
Not available when
“Viewing Mode” is set to
“True Cinema” or
“Professional1 / 2”
Not available in PC or when
“Viewing Mode” is set to
“Professional1 / 2”
Available when “Viewing Mode”
is set to “Photo”
Available in NTSC / PAL
Sound Menu
NICAM
SPDIF Selection
MPEG Optical Level
HDMI1 Input
Audio Description
Reset to Defaults
1/2
Music
Access
Available when “Mode” is set to
“Music” or “Speech”
Off
Available when “Mode” is set to
“User”
Equalizer
Over 30cm
English
Reset to Defaults
2/2
Off
Auto
0
Digital
Access
Reset
150 250 500 1k
2k
4k
8k 12k Hz
Available in digital
(p. 33)
Available in Analogue
Available in digital, Network
video contents or Video mode
Available in digital
Available in HDMI
●How to Use Menu Functions
Sound Menu
Mode
Bass
Treble
Equalizer
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to Wall
Preferred Multi Audio
Basic
Not available in PC or when
“Viewing Mode” is set to
“Professional1 / 2”
Available in freesat or DVB
freesat:
Audio Description Menu
Audio Description
Off
(p. 33)
DVB:
Audio Description Menu
Audio Description
Volume
Speakers
Headphones
Off
Off
Off
(p. 33)
37
How to Use Menu Functions
■Overview (Setup)
●How to operate
Timer Programming
F u n ct io n
p. 31
Main Menu
No .
72 BBC 2W
< T I ME R >
Reminder
14 E4
The Bill
Ext Rec.
1 BBC ONE
DIY SOS
Ext Rec.
1 BBC ONE
< T I ME R >
Wed 28.10.2009 10:46
Date
Ch an n e l N a m e
Ext Rec.
---
Picture
USB HDD Remaining Capacity 500GB (50%)
Start
Wed 28 Oct
Guide
S/P
STTL
End
20:00 21:30
( 90 m i n. )
Wed 28 Oct
21: 00 22: 00
( 60 m i n. )
Wed 28 Oct
22: 45 23: 00
( 15 m i n. )
Thu 29 Oct
10: 30 11: 30
(60 min.)
--/--
--:---:-(--- min.)
---
(p. 52)
Sound
Setup
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
freesat Tuning Menu
DVB Tuning Menu
Analogue Tuning Menu
Other Sat. Tuning Menu
Display Settings
Network Setup
Access
Off
Access
Access
Access
Access
Access
Access
Access
Access
Access
Setup Menu
DivX® VOD
Advance(isfccc)
System Menu
Other Settings
Access
Off
Access
Access
1/2
USB HDD Setup
Device Setup
One Touch Recording
Rewind LIVE TV
Access
180 minutes
On
(p. 62)
Child Lock-PIN Entry
Please enter new PIN
PIN
* * * *
(p. 54)
Available in freesat
2/2
freesat Tuning Menu
Favourites Edit
Channel List
Auto Setup
Signal Condition
Access
Access
Access
Access
(p. 40 and p. 42)
(p. 34 - 36)
Available in DVB
Other Settings
GUIDE Plus+ Settings
Intelligent Frame Creation
24p Smooth Film
Resolution Enhancer
Power on Preference
Power on Channel List
Auto Standby
Power Save
16:9 Overscan
DVI Input Setting
Access
Off
Off
Off
TV
Last
Off
Off
On
Normal
DVB Tuning Menu
Favourites Edit
Channel List
Auto Setup
Channel Sorting by Region
Manual Tuning
Update Channel List
New Channel Message
Signal Condition
Available in
DVB or Other Sat.
Access
Access
Access
Access
Access
Access
On
Access
(p. 41 and p. 44)
(p. 36)
Available in HDMI
with DVI input signal
DVB Update Channel List
Progress
Analogue Scan
CH 21
This will take about 3 minutes.
CH
68
Channel Name
Type
Quality
Guide Plus+ Settings Menu
Postcode
Access
System Information
Access
(p. 36)
Free TV: 0
4
2
abc
5
Available in Analogue
3
def
6
ghi
jkl
mno
7
8
9
pqrs
tuv
wxyz
0
(p. 36)
Display Settings
Teletext
Preferred Subtitles
Input Labels
Banner Display Timeout
Playing Time Display
Radio Mode
Analogue Tuning Menu
Channel List
Auto Setup
Manual Tuning
Access
Access
Access
(p. 41 and p. 46)
Available in Analogue
FASTEXT
English
Access
3 seconds
On
Off
Available in freesat,
DVB or Other Sat.
Available in Other Sat.
(p. 35)
Input Labels
AV1
AV2/S
AV3
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
Input Labels
freesat
DVB
Analogue
Other Sat.
38
Data: 0
(p. 46)
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z
0 1 2 3 4 5 6 7 8 9
1
Radio: 0
Searching
Enter Postcode
Postcode
.!:#
Pay TV: 0
1/2
DVD
AV2/S
AV3
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
Other Satellite Tuning Menu
Favourites Edit
Access
Channel List
Access
Auto Setup
Access
Manual Tuning
Access
Add New Channels
Access
Signal Condition
Access
(p. 48)
2/2
freesat
DVB
Analogue
Other Sat.
(p. 55)
System Menu
USB Keyboard Layout
Shipping Condition
Owner ID
Common Interface
System Update
Software Licence
System Information
English(UK)
Access
Access
Access
Access
Access
Access
(p. 36)
Link Settings
VIERA Link
HDMI Content Detection
Q-Link
AV2 out
Standby Power Save
Intelligent Auto Standby
Q-Link Download
1/2
On
Off
AV2
TV
On
On (No reminder)
Access
Sending Preset Data
Please wait!
0%
100%
Remote control unavailable
(p. 34)
(p. 34)
Child Lock List - TV and AV
Child Lock
Change PIN
Child Lock List
Access
Access
(p. 54)
4
7
14
VCR
1
2
Name
BBC 1 Wales
BBC THREE
E4
Input
DVB
DVB
DVB
Analogue
Analogue
Analogue
External
External
BBC1
*****
AV1
AV2/S
Type
Free TV
Free TV
Free TV
Analogue
Analogue
Analogue
AV
AV
Lock
Lock
Lock
Lock
Lock
Lock
Lock
Lock
(p. 54)
freesat Favourites Editor
freesat Auto Setup
Searching
Signal Quality
Signal Strength
TV Channels Found
Radio Channels Found
Data Channels Found
0
0
10
10
8
2
1
Channels found, creating channel list
(p. 40)
freesat Channel List
101 BBC 1 Scotland
102 BBC 2 Scotland
103 stv
104 stv
108 BBC THREE
109 BBC FOUR
110 BBC HD
Favourites
All freesat Channels
101
102
103
108
109
110
112
113
BBC 1 Wales
BBC 2 Wales
ITV1 WALES
BBC THREE
BBC FOUR
BBC HD
ITV2
ITV2+1
(p. 43)
(p. 43)
Basic
DVB Favourites Editor
DVB Auto Setup
Progress
CH 21
68
This will take about 3 minutes.
CH
Channel Name
62
CBBC Channel
62
BBC Radio Wales
62
E4
62
Cartoon Nwk
Pay TV: 0
Radio: 0
Quality
10
10
10
10
Favourites1
All DVB Channels
1
7
14
70
72
105
719
720
BBC One Wales
BBC THREE
E4
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
(p. 45)
(p. 45)
Data: 0
Searching
(p. 41)
Channel Sorting by Region
DVB Manual Tuning
Frequency
Signal
Quality
Analogue
Scan
Signal Strength
No.
Free TV: 0
474 MHz
[CH21]
0
21
0
Channel Name
Pay TV: 0
Type
Radio: 0
Stopped
1068
10
New
Data: 0
GBR>
Best signal quality (All Regions)
England Regions>
Region choice available
(p. 44)
(p. 44)
Analogue Auto Setup
Analogue Manual Tuning
1 BBC1
Manual Tuning
CH33
68
21
(p. 46)
Scan
This will take about 3 minutes.
CH
29
30
CH 21
68
Channel Name
Analogue Channel List
1 BBC1
2 *****
3 *****
4
5
6
7
●How to Use Menu Functions
Free TV: 4
Type
Free TV
Free TV
Free TV
Free TV
All DVB Channels
70 CBBC Channel
72 Cartoon Nwk
105 BBCi
719 BBC Radio Wales
720 BBC Radio Cymru
1 BBC ONE Wales
7 BBC THREE
(p. 46)
Analogue: 2
Searching
(p. 41)
Other Satellite Auto Setup
Other Satellite Auto Setup - Satellite Selection
Satellite Selection
Astra2/Eurobird
freesat and other channels
(p. 49)
Search Mode
Free Channels
All Channels
(p. 49)
Astra 2/Eurobird
Satellite
Progress
0%
Analogue Scan
21
This may take up to 20 minutes.
No.
Channel Name
1
BBC 1 East (W)
2
BBC 1 Cl
3
BBC HD
4
6945
Free TV: 4
Pay TV: 0
Searching
100%
68
Type
Free TV
Free TV
Free TV
Free TV
Quality
10
10
10
10
Radio: 0
(p. 49)
Shipping Condition
Available in DVB
Common Interface
Slot 1:
All tuning data will be erased
Are you sure?
Are you sure?
Owner ID
Please enter PIN for access
PIN
* * * *
Module inserted
(p. 57)
(p. 56)
(p. 51)
System Update
Auto Update Search in Standby
System Update Search Now
On
Access
(p. 58)
39
Retuning from Setup Menu
Auto Setup retunes all channels automatically.
freesat channels
Automatically retune all the freesat channels received in the area.
●Only freesat channels are retuned.
●All the previous tuning settings (Favourites Edit and Channel List, etc.) are erased.
●If a Child Lock PIN number (p. 54) has been set, it must be entered.
INPUT
TV
MENU
EXIT
1
Select freesat
2
Display the menu
3
Select “Setup”
p. 16
TV
MENU
access
Main Menu
Picture
Sound
Setup
4
■To return to TV
5
EXIT
■For Auto Setup, using
the buttons on the side
panel of the TV (p. 9)
Press repeatedly until
“Auto Setup” appears
F
6
select
Select “freesat Tuning Menu”
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
freesat Tuning Menu
Other Sat. Tuning Menu
Display Settings
Network Setup
access
1/2
Off
select
Access
Select “Auto Setup”
freesat Tuning Menu
Favourites Edit
Channel List
Auto Setup
Signal Condition
access
Access
select
Start Auto Setup
freesat Auto Setup
freesat Auto Setup
All freesat tuning data will be erased
Searching
Signal Quality
Signal Strength
TV Channels Found
Radio Channels Found
Data Channels Found
Access “Auto Setup”
TV
0
0
10
10
8
2
1
Channels found, creating channel list
Settings are made automatically
Start
“Auto Setup”
TV
F
7
Enter your postcode
Enter Postcode for local channels including space
Postcode
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z
0 1 2 3 4 5 6 7 8 9
1
.!:#
4
ghi
TV
7
pqrs
2
abc
5
jkl
8
tuv
3
●To return to TV
F
Note
●You cannot set the postcode
in this operation.
The previous postcode
setting is not erased.
40
select
Store
green
def
6
mno
9
wxyz
0
AV
Set characters
one by one
Your postcode is required to
receive local services and
sort the channel order.
Please ensure to include a
space when entering your
postcode.
set
●You can set characters by using
numeric buttons.
“Characters table for numeric
buttons” (p. 96)
When the operation is completed, the channel at the lowest
position will be displayed.
DVB or Analogue channels
Automatically retune all DVB or Analogue channels received in the area.
●Only DVB channels are retuned in DVB mode.
●Only Analogue channels are retuned in Analogue mode.
●All the previous tuning settings (Channel List, etc.) are erased.
●If a Child Lock PIN number (p. 54) has been set, it must be entered.
INPUT
TV
MENU
EXIT
1
Select DVB or Analogue
2
Display the menu
TV
MENU
Select “Setup”
access
Main Menu
Picture
Sound
Setup
4
select
Select “DVB Tuning Menu” or
“Analogue Tuning Menu”
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
DVB Tuning Menu
Analogue Tuning Menu
Display Settings
Network Setup
access
1/2
Off
select
Access
Access
●“DVB Tuning Menu” is available
in DVB mode only.
●“Analogue Tuning Menu” is
available in Analogue mode
only.
5
■To return to TV
EXIT
the buttons on the side
panel of the TV (p. 9)
Press repeatedly until
“Auto Setup” appears
Start “Auto Setup”
TV
access
DVB Tuning Menu
Favourites Edit
Channel List
Auto Setup
Access
Channel Sorting by Region
Manual Tuning
Update Channel List
New Channel Message
On
Signal Correction
Analogue Tuning Menu
Channel List
Auto Setup
Manual Tuning
6
Access “Auto Setup”
DVB:
select
Analogue:
F
TV
Select “Auto Setup”
Advanced
■For Auto Setup, using
●Retuning from Setup Menu
3
p. 16
Access
Start Auto Setup
DVB:
DVB Auto Setup
All DVB tuning data will be erased
F
DVB Auto Setup
Progress
CH 21
68
This will take about 3 minutes.
CH
Channel Name
62
CBBC Channel
62
BBC Radio Wales
62
E4
62
Cartoon Nwk
Free TV: 4
Pay TV: 0
Type
Free TV
Free TV
Free TV
Free TV
Radio: 0
Quality
10
10
10
10
Data: 0
Searching
TV
AV
Analogue:
Analogue Auto Setup
All analogue tuning data will be erased
●To return to TV
Analogue Auto Setup
Scan
This will take about 3 minutes.
CH
29
30
CH 21
68
Channel Name
F
Analogue: 2
Searching
Note
●If tuning has not been done
completely
“Manual Tuning” (p. 40)
Settings are made automatically
●The analogue settings are downloaded to a Q-Link compatible
equipment connected to the TV in Analogue mode.
When the operation is completed, the channel at channel
position “1” will be displayed.
41
Tuning and Editing Channels
(freesat)
You can retune channels or make your favourite channel list, skip unwanted channels, etc.
INPUT
TV
MENU
EXIT
BACK/
RETURN
1
Select freesat
2
Display the menu
3
Select “Setup”
p. 16
TV
MENU
access
Main Menu
Picture
Sound
Setup
4
5
select
Select “freesat Tuning Menu”
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
freesat Tuning Menu
Other Sat. Tuning Menu
Display Settings
Network Setup
1/2
access
Off
select
Access
Select one of the following functions
freesat Tuning Menu
Favourites Edit
Channel List
Auto Setup
Signal Condition
access
Access
Access
Access
Access
select
TV
“Retuning from Setup Menu” (p. 40)
■To return to TV
EXIT
42
6
Set
List favourite freesat channels Favourites Edit
Create your favourite channel list from various broadcasters.
The freesat Favourites list is available from “Channel Genre” in the TV Guide (p. 20).
Select a channel to list
freesat Favourites Editor
Favourites
All freesat Channels
101
102
103
108
109
110
112
113
BBC 1 Wales
BBC 2 Wales
ITV1 WALES
BBC THREE
BBC FOUR
BBC HD
ITV2
ITV2+1
select
Add it to the Favourites list
Favourites
All freesat Channels
101
102
103
108
109
110
112
113
BBC 1 Wales
BBC 2 Wales
ITV1 WALES
BBC THREE
BBC FOUR
BBC HD
ITV2
ITV2+1
101 BBC 1 Wales
●To add all channels to the list
yellow
A channel is added
■To edit Favourites list
Select the field of Favourites to edit and:
●To delete the channel
Note
●Channel position numbers (known as logical
●To delete all channels
channel numbers) cannot be changed, due to
broadcast restrictions.
yellow
Store
●Tuning and Editing Channels
freesat Favourites Editor
BACK/
RETURN
Skip unwanted freesat channels Channel List
You can hide unwanted freesat channels.
The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels.
reveal / hide
freesat Channel List
101 BBC 1 Scotland
102 BBC 2 Scotland
103 stv
104 stv
108 BBC THREE
109 BBC FOUR
110 BBC HD
select
: reveal
: hide (skip)
●To reveal all channels
yellow
Advanced
Select a channel and reveal / hide
Check freesat signal Signal Condition
Selects a channel and checks the freesat signal condition.
●To change the channel
freesat Signal Condition
Channel Name
Signal Quality
0
Signal Strength
0
Bit Error Rate
Satellite
Parameter
101 BBC 1 Wales
10
10
0.00E+00
Astra 28.2° E
10847MHz, V, 22000kS/s
A good Signal Strength is not an indication of best signal for freesat
reception. Please use the Signal Quality indicator as follows:
Signal Quality:
●Green bar Good
●Yellow bar Poor
●Red bar Bad (Check the Satellite dish)
43
Tuning and Editing Channels
(DVB)
You can retune channels or make your favourite channel lists, skip unwanted channels, etc.
INPUT
TV
MENU
EXIT
1
Select DVB
2
Display the menu
3
Select “Setup”
BACK/
RETURN
def
ghi
jkl
mno
pqrs
tuv
wxyz
EXIT
MENU
access
Main Menu
Picture
Setup
5
■To return to TV
TV
Sound
4
abc
p. 16
select
Select “DVB Tuning Menu”
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
DVB Tuning Menu
Display Settings
Network Setup
access
1/2
Off
select
Access
Select one of the following functions
DVB Tuning Menu
Favourites Edit
Channel List
Auto Setup
Channel Sorting by Region
Manual Tuning
Update Channel List
New Channel Message
Signal Condition
access
Access
Access
Access
Access
Access
Access
On
Access
select
●Auto Setup
“Retuning from Setup Menu” (p. 41)
6
Set
Sort DVB channels according to the region Channel Sorting by Region
You can sort DVB channels so that those with the best signal quality, or those for your preferred region, appear
nearer the top of your Channel List.
Normally, you should select “Best signal quality (All Regions)”.
access
Channel Sorting by Region
GBR>
Best signal quality (All Regions)
England Regions>
select region
(select repeatedly until you reach the available region)
Region choice available
●If you choose to select your preferred region, you could find channels with a weaker signal appear nearer the
top of your Channel List. If you have any image or sound problems, select “Best signal quality (All Regions)”
instead.
Set DVB channel manually Manual Tuning
Normally use “Auto Setup” or “Update Channel List” to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
DVB Manual Tuning
Frequency
Signal
Quality
Analogue
Scan
Signal Strength
No.
474 MHz
[CH21]
0
21
0
Channel Name
Type
select frequency
1068
10
New
search
44
Free TV: 0
Pay TV: 0
Radio: 0
Stopped
Data: 0
●All channels found will be added to the Channel List.
List favourite DVB channels Favourites Edit
Create your favourite channel lists from various broadcasters (up to 4: Favourites1 to 4).
The DVB Favourites lists are available for switching in the Information banner (p. 17) and from “Category” in the
TV Guide (p. 21).
Select a channel to list
DVB Favourites Editor
Favourites1
All DVB Channels
1
7
14
70
72
105
719
720
BBC One Wales
BBC THREE
E4
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
select
Add it to the Favourites list
Favourites1
All DVB Channels
yellow
1 BBC One Wales
■To edit Favourites list
A channel is added
Select the field of Favourites to edit and:
●To delete a channel
●To delete all channels
Select the channel
●To name the Favourites
red
Set characters one by one
(maximum: ten characters)
Store
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
.!:#
4
2
abc
5
You can set characters by using
numeric buttons.
“Characters table for numeric
buttons” (p. 96)
3
6
jkl
mno
7
8
9
tuv
set
def
ghi
pqrs
wxyz
0
●To move the channel
green
BACK/
RETURN
select
User input
Name
A
U
a
u
yellow
Select the new position
Confirm
●Tuning and Editing Channels
BBC One Wales
BBC THREE
E4
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
green
●To add all channels to the list
DVB Favourites Editor
1
7
14
70
72
105
719
720
●To display other Favourites
Encrypted channel
green
or
Select the turn
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Store
Advanced
BACK/
RETURN
Note
●Channel position numbers (known as logical channel numbers) can be swapped in Channel List.
To swap the channel position number
“Channel List” (below)
Skip unwanted DVB channels, Edit DVB Channels Channel List
You can hide unwanted DVB channels.
The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels.
Select a channel and reveal / hide
All DVB Channels
70 CBBC Channel
72 Cartoon Nwk
105 BBCi
719 BBC Radio Wales
720 BBC Radio Cymru
1 BBC ONE Wales
7 BBC THREE
reveal / hide
select
■To edit channels
You can also edit each channel in Channel List.
Select a channel to edit and:
Coronation Street
19:30 - 20:00
(only for the revealed channels)
●To swap the channel position number
(logical channel number)
green
yellow
Channel position number
D 1 BBC ONE Wales
●To retune each channel - Manual Tuning (p. 44)
●To reveal all channels
: reveal
: hide (skip)
19:35
Radio
Now
All DVB Channels
Select favourites
For info press
red
Enter the new position number
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Store
green
45
Tuning and Editing Channels
Update DVB channel automatically Update Channel List
You can add new channels, delete removed channels, update channel name and position automatically to
Channel List.
●Channel List is updated while keeping your settings in Favourites Edit,
DVB Update Channel List
Progress
Analogue Scan
CH 21
This will take about 3 minutes.
CH
Free TV: 0
68
Channel Name
Pay TV: 0
Type
Radio: 0
Channel List, Child Lock, Timer Programming, etc.
Quality
Data: 0
Searching
Display a notification message New Channel Message
Selects whether to give a notification message when a new DVB channel is found. (Off / On)
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
●Selecting OK will perform “Update Channel List”.
Check DVB signal Signal Condition
Selects a channel and checks the DVB signal condition.
DVB Signal Condition
Channel Name
Signal Quality
Signal Strength
Bit Error Rate
Network Name
Parameter
A good Signal Strength is not an indication of best signal for DVB reception.
Please use the Signal Quality indicator as follows:
Signal Quality:
●Green bar Good
●Yellow bar Poor
●Red bar Bad (Check the Terrestrial aerial)
70 CBBC Channel
0
0
●To change the channel
10
10
0.00E+00
Wenvoe
[CH62] 802 MHz
(Analogue)
You can retune channels or skip unwanted channels, edit channels etc.
INPUT
TV
MENU
EXIT
BACK/
RETURN
1
Select Analogue
2
Display the menu
3
Select “Setup”
p. 16
TV
MENU
access
Main Menu
Picture
Sound
Setup
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
4
5
select
Select “Analogue Tuning Menu”
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
Analogue Tuning Menu
Display Settings
Network Setup
access
Off
select
Access
Select one of the following functions
Analogue Tuning Menu
Channel List
Auto Setup
Manual Tuning
access
Access
Access
Access
select
■To return to TV
EXIT
46
●Auto Setup
“Retuning from Setup Menu” (p. 41)
6
Set
Skip unwanted Analogue channels, Edit Analogue channels Channel List
You can hide unwanted Analogue channels.
The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels.
Select a channel and reveal / hide
reveal / hide
Analogue Channel List
1 BBC1
2 *****
3 *****
4
5
6
7
●To reveal all channels
: reveal
: hide (skip)
select
yellow
You can also edit each channel in Channel List.
Channel position
Channel name
A 3 ITV
Select a channel to edit and:
Radio
●To retune each channel - Manual Tuning (below)
green
●To rename the channel name
All Analogue Channels
For info press
Mute
●To move the channel position
23:35
itv
CH23
blue
Encrypted
AD
Subtitles TXT Multi Audio
45
red
Store
Select the new position
green
Set characters one by one
(maximum: five characters)
Store
select
Edit channel name
Name
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
.!:#
4
2
abc
5
ghi
jkl
7
8
pqrs
tuv
●Tuning and Editing Channels
■To edit channels
BACK/
RETURN
set
3
def
6
mno
9
wxyz
0
●You can set characters by using numeric buttons.
Note
●If a VCR is connected only with the RF cable, edit “VCR”.
Set Analogue channel manually Manual Tuning
Advanced
“Characters table for numeric buttons” (p. 96)
Set Analogue channel manually after Auto Setup.
●If a VCR is connected only with the RF cable, it is recommended to select channel position “0”.
Analogue Manual Tuning
1 BBC1
Manual Tuning
CH33
68
21
Select the channel position
abc
Select the channel
Search and store
def
ghi
jkl
mno
pqrs
tuv
wxyz
search
store
47
Tuning and Editing Channels
(Other Sat.)
You can tune all receivable digital satellite channels or skip unwanted channels, etc.
●Some of Other Sat. functions may work to differing specifications (depending on the broadcasters).
Select freesat or Other Sat.
1
INPUT
TV
MENU
EXIT
BACK/
RETURN
p. 16
TV
2
Display the menu
3
Select “Setup”
MENU
access
Main Menu
Picture
Sound
Setup
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
4
5
■To return to TV
EXIT
6
select
Select “Other Sat. Tuning Menu”
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
freesat Tuning Menu
Other Sat. Tuning Menu
Display Settings
Network Setup
1/2
access
Off
select
Access
Select one of the following functions
Other Satellite Tuning Menu
Favourites Edit
Access
Channel List
Access
Auto Setup
Access
Manual Tuning
Access
Add New Channels
Access
Signal Condition
Access
access
select
Set
Set Other Sat. channel manually Manual Tuning
Normally use “Auto Setup” or “Add New Channels” to tune Other Sat. channels.
Other Satellite Manual Tuning
Transponder Frequency 10773
Polarisation
Horizontal
Symbol Rate (Ksym/s)
Auto
●Set tuning parameters for the required satellite, details can usually be found in
a satellite TV magazine.
Check Other Sat. signal Signal Condition
Selects a channel and checks the Other Sat. signal condition.
●To change the channel
Other Satellite Signal Condition
Channel Name
1 BBC 1 East (W)
Signal Quality
0
10
Signal Strength
0
10
0.00E+00
Bit Error Rate
Astra 28.2° E
Satellite
10847MHz, V, 22000kS/s
Parameter
48
A good Signal Strength is not an indication of best signal for
Other Sat. reception. Please use the Signal Quality indicator as
follows:
Signal Quality:
●Green bar Good
●Yellow bar Poor
●Red bar Bad (Check the Satellite dish)
Set all receivable digital satellite channels Auto Setup
Any receivable digital compliant satellite channels can be tuned.
●Only Other Sat. channels are retuned.
●All the previous tuning settings are erased.
●If a Child Lock PIN number (p. 54) has been set, it must be entered.
Select the satellite
●Selectable satellites are Astra2/Eurobird, Astra1 and
Other Satellite Auto Setup - Satellite Selection
Satellite Selection
Astra2/Eurobird
freesat and other channels
Hotbird.
Check the dish alignment for the satellite you want to
select
select
set
• Astra2/Eurobird
• Astra1, Hotbird
●If you want to tune from all available satellites, select “Any
Satellite”.
Check the signal condition and the message
●It takes a while to check the connection for your selected
Other Satellite Auto Setup - Satellite Selection
Satellite Selection
freesat and other channels
Signal Quality
Signal Strength
Signal Lock
Astra2/Eurobird
satellite.
0
0
Locked
●Ensure that the Signal Lock status is shown as “Locked”.
10
10
If it is not locked, the search cannot be executed.
●If the status is shown as “Not locked” and Signal Quality /
If you select “Any Satellite”,
this step is skipped.
Signal Strength have no indications, please check the dish
alignment.
If the status is shown as “Not locked” but there are some
levels of Signal Quality / Signal Strength indicated, select
“Any Satellite” in Satellite Selection and try again.
Other Satellite Auto Setup
All Other Satellite tuning data will be erased
Set the search mode and start Auto Setup
Search Mode
Free Channels
All Channels
●Tuning and Editing Channels
p. 10
Please consult the received satellite
broadcasting companies.
set
start
●If you select “Astra2/Eurobird” or “Any Satellite”, freesat
Other Satellite Auto Setup
Astra 2/Eurobird
Satellite
Progress
0%
Analogue Scan
21
This may take up to 20 minutes.
No.
Channel Name
1
BBC 1 East (W)
2
BBC 1 Cl
3
BBC HD
4
6945
Pay TV: 0
Searching
channels will also be searched. But the channels which
have already been tuned in freesat will not be duplicated.
Quality
10
10
10
10
Radio: 0
Settings are made automatically
When the operation is completed, the channel at channel position “1” will be displayed.
Add Other Sat. channel automatically Add New Channels
Advanced
Free TV: 4
100%
68
Type
Free TV
Free TV
Free TV
Free TV
You can add any new channels found automatically to Channel List.
Check the signal condition
●It takes a while to check the connection for your selected
Other Satellite Add New Channels - Satellite Selection
Satellite Selection
freesat and other channels
Signal Quality
Signal Strength
Signal Lock
Astra2/Eurobird
satellite.
0
0
Locked
●Ensure that the Signal Lock status is shown as “Locked”.
10
10
If you selected “Any Satellite” in Auto Setup,
this step is skipped.
If it is not locked, the search cannot be executed.
●If the status is shown as “Not locked” and Signal Quality
/ Signal Strength have no indications, please check the
dish alignment.
Set the search mode and start Add New Channels
Search Mode
Free Channels
All Channels
set
start
Other Satellite Add New Channels
Astra2/Eurobird
Satellite
Progress
0%
Analogue Scan
21
This may take up to 20 minutes.
No.
Channel Name
68
100%
68
Type
Quality
●New channels can only be added to the existing Channel
List from the same satellite.
Free TV: 0
Pay TV: 0
Searching
Radio: 0
49
Tuning and Editing Channels
List favourite Other Sat. channels Favourites Edit
Create your favourite channel lists from various broadcasters (up to 4: Favourites1 to 4).
The Other Sat. Favourites lists are available for switching in the Information banner (p. 17).
Select a channel to list
Other Sat. Favourites Editor
Favourites1
All Other Sat. Channels
1
2
3
4
5
6
7
8
select
BBC One Wales
BBC THREE
E4
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
●To display other Favourites green
●To change the category red
Add it to the Favourites list
●To add continuous block of channels to the list at once
Other Sat. Favourites Editor
Favourites1
All Other Sat. Channels
1
2
3
4
5
6
7
8
BBC One Wales
BBC THREE
E4
CBBC Channel
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
1 BBC One Wales
yellow
Make the block
A channel is added
■To edit Favourites list
Select the field of Favourites to edit and:
●To delete the channel
●To delete all channels
yellow
Set characters one by one
●To name the Favourites
red
Store
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
BACK/
RETURN
select
User input
Name
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
.!:#
4
ghi
7
pqrs
2
abc
5
jkl
8
tuv
set
3
def
6
mno
9
wxyz
0
You can set characters by using numeric buttons.
“Characters table for numeric buttons” (p. 96)
●To move the channel
green
Select the new position
Confirm
green
or
Select the turn
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Store
BACK/
RETURN
Skip unwanted Other Sat. channels, Edit Other Sat. Channels Channel List
You can hide unwanted Other Sat. channels.
The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels.
Select a channel and reveal / hide
Other Sat. Channel List
2 freesatHome
3 freesatSSU
4 Brit Shorts
5 HINRG LOWNRG
6 WELL Class
7 GROOVE
8 -
■To edit channels
Free TV
Free TV
Free TV
Free TV
Free TV
Free TV
Unknown
select
A channel that cannot
be identified is shown
as “Unknown”
You can also edit each channel in Channel List.
Select a channel to edit and:
●To delete the channel
50
●To swap the channel position
●To reveal all channels
reveal / hide
: reveal
: hide (skip)
Channel position
S 103 ITV Wales
Radio
Coronation Street
19:30 - 20:00
Now
19:35
All Other Sat. Channels
Select favourites
For info press
red
green
Enter the new position number
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Store
green
yellow
Shipping Condition
Resets the TV to its original condition with no channels tuned in.
All settings other than “Owner ID” and “USB HDD registration” are reset (channels, picture, sound
settings, etc.).
1
Display the menu
2
Select “Setup”
MENU
MENU
EXIT
access
Main Menu
Picture
Sound
3
4
■To return to TV
5
Select ”System Menu”
Setup Menu
DivX® VOD
Advance(isfccc)
System Menu
Other Settings
2/2
access
Off
Access
select
Select “Shipping Condition”
System Menu
USB Keyboard Layout
Shipping Condition
Owner ID
Common Interface
System Update
Software Licence
access
English(UK)
Access
select
Set
Restore Settings Shipping Condition
Check the message and initialise
Advanced
EXIT
select
●Shipping Condition
●Tuning and Editing Channels
Setup
Shipping Condition
All tuning data will be erased
Are you sure?
Are you sure?
Confirm
EXIT
(confirm)
(confirm)
RETURN
(start Shipping Condition)
Follow the on screen instructions
Reset to Factory Shipping Condition
Completed.
Please switch off TV.
●“Auto Setup” will automatically start when Mains power On / Off switch is next turned On. (p. 12)
■To retune TV channels only, e.g. after moving house
“Retuning from Setup Menu” (p. 40 and p. 41)
51
Timer Programming
Timer Programming from Menu
The Timer Programming menu allows you to choose programmes that you wish to remind watching
or record to the external recorder or the USB HDD. At the correct time, the TV will tune to the correct
channel automatically to record even if the TV is in Standby mode.
TV Guide may also be used to set timer programming event (p. 22).
●Timer Programming can store up to 15 events.
●For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed,
the TV must be On.
●No other channel can be selected while the recording of Timer Programming is in progress.
●It may not be possible to record an encrypted programme (which is copy-protected).
●When recording programmes to the external recorder, be sure to make the proper settings on the recorder
connected to the TV.
If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 86) and the “Link Settings”
(p. 34) are correct, no setting of the recorder is required. Also read the manual of the recorder.
●If the recorder is not compatible with Q-Link or similar technologies, set “Q-Link” in the Setup Menu (p. 34) to the
connected terminal (AV1 or AV2), and set the timer of the recorder in addition to the Timer Programming on the
TV. For preparations of a recorder, read the manual of the recorder.
●When recording programmes to the USB HDD, be sure to register the USB HDD and enable it for recording in the
“USB HDD Setup” (p. 62).
●Recordings are always in standard definition composite video via SCART, even if the original programme is in
high definition.
INPUT
TV
MENU
EXIT
IDE
GU
1
Select the tuner you want to use
2
Display the menu
3
Select “Setup”
p. 16
TV
MENU
access
Main Menu
Picture
Sound
Setup
■To return to TV
4
EXIT
■To unlock the tuner
(stop recording)
IDE
GU
EXIT
5
select
Select “Timer Programming”
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
freesat Tuning Menu
Other Sat. Tuning Menu
Display Settings
Network Setup
1/2
access
Access
Off
select
Set
Note
●Check that the LED is orange. If not, timer programmes are not active or not stored.
●Timer Programming reminder messages will remain displayed until one of the following occurs:
• You press the OK button to view the programme or the EXIT button to cancel the reminder.
• The timer programming event that the reminder is set for ends.
●“!” identifies that any timer programming events have overlapped. “Ext Rec.” and “USB HDD Rec.” are given
priority over “Reminder”. When two or more “Ext Rec.” / “USB HDD Rec.” overlap, the first timer programming
event starts and finishes as programmed. The next timer programming event will then start.
●2 mins. before the starting time, a reminder message appears if you are watching TV.
• To remove the message and start the programme
• To cancel the Timer Programming
EXIT
●The recording of Timer Programming will automatically change to the programmed channel 10 seconds before
the start time.
52
●To stop recording of the timer programming event, it may be necessary to stop the recorder manually.
●The recording of Timer Programming will be performed even if the TV is in Rewind LIVE TV recording (p. 65) and
Pause Live TV recording (p. 89). In this case, these recordings will be cancelled.
Set timer programming event details Timer Programming
Start making the settings
Select the function (Ext Rec., USB HDD Rec. or Reminder)
select
: to record the programme to the external recorder (Ext Rec.) or the
Ext Rec. /
USB HDD Rec. USB HDD (USB HDD Rec.)
When the start time comes, the channel will be switched automatically
and the video and audio signals will be output. 2 mins. before the starting
time, a reminder message appears if you are watching TV.
Reminder
: to remind you to watch the programme
When you are watching TV, a reminder message appears 2 mins. before
the start time. Press the OK button to switch to the programmed channel.
Set the channel, date and time (repeat the operations as below)
Set items in the order of
to .
●
select
the item
, and can also be
entered with numeric buttons.
set
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Information of the USB HDD (if available)
Timer Programming
Function
USB HDD Remaining Capacity 500GB (50%)
No.
Wed 28.10.2009 10:46
Date
Cha n n e l Na m e
Start
End
Ext Rec.
72 BBC 2W
<TIMER>
Wed 28 Oct
20:00 21:30
(90 min.)
Reminder
14 E4
The Bill
Wed 28 Oct
21:00 22:00
(60 min.)
Ext Rec.
1 BBC ONE
DIY SOS
Ext Rec.
1 BBC ONE
<TIMER>
---
Guide
S/P
STTL
Wed 28 Oct
22:45 23:00
(15 min.)
Thu 29 Oct
10:30 11:30
(60 min.)
--/--
--:---:-(--- min )
---
Channel number
Store
Date
: freesat
: DVB
: Analogue
: Other Sat.
●You cannot change the
mode within the menu.
Select the programme to be changed
■To cancel a timer programming event
Select the programme to be deleted
■To record with subtitles (if available)
●To indicate this
(press again to
remove subtitles)
Duration (automatic display)
Ending time
Starting time
●Daily Sun-Sat: Sunday to Saturday
●Daily Mon-Sat: Monday to Saturday
●Daily Mon-Fri: Monday to Friday
daily or weekly
(press repeatedly) ●Weekly Sat/Fri/Thu/Wed/Tue/Mon/Sun:
one day ahead
Same time on the same day every week
access
Correct as necessary
(as above)
select
red
●Each time pressed:
Select the programme to record with subtitles
yellow
■To cancel a timer programming event temporarily
Select the programme to be cancelled
yellow
Advanced
■To change a timer programming event
Records with subtitles (if available)
●Timer Programming
Timer programming - Programmes according to the time setting
Displayed if the
timer programming
Guide: Guide link programming - Programmes according to the TV Guide signal (p. 23)
events are overlapped
S/P: Split Programme programming (p. 23)
blue
auto
off
●Each time pressed:
cancel
stop cancelling
■To view details of the programming (only for Guide link programming)
Select the programme to be viewed
●Press again to return to
Timer Programming menu.
■Guide link programming (Timer Programming from the TV Guide signal)
●This function is not available in Analogue or Other Sat. mode.
p. 23
Guide link programming is Timer Programming which is controlled by information from the TV Guide; if
programme start and end times are changed by the broadcaster, the timer programming event will follow the change.
A Split Programme programming is a Guide link programming which is interrupted by one or more other programmes.
Note that Guide link programming (including Split Programme programming) only works reliably if correct
information is received from broadcasters.
53
Child Lock
You can lock specific channels / AV input terminals and control who watches them.
When the locked channel / input is selected, a message appears; by entering the PIN number, you can watch it.
MENU
EXIT
1
Display the menu
2
Select “Setup”
MENU
access
Main Menu
Picture
Sound
Setup
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Select “Child Lock”
3
■To return to TV
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
freesat Tuning Menu
Other Sat. Tuning Menu
Display Settings
Network Setup
4
EXIT
select
access
1/2
Off
select
Access
Set
Control channel audience Child Lock
Enter the PIN number (4 digits)
Child Lock-PIN Entry
Please enter new PIN
PIN
* * * *
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
●Enter the PIN number twice at first setting.
●Make a note of the PIN number in case you forget it.
Select “Child Lock List”
Child Lock
Change PIN
Child Lock List
freesat Adult Channels
freesat Players
access
Access
Don’t hide
Unlock
select
●In freesat mode, additional lock items will appear.
freesat Adult Channels: Select “Hide” to hide channels of the adult genre in TV Guide and Channel List.
All the Timer Programming events of the adult genre will be cancelled.
freesat Players: Locks freesat content supplied through the internet.
Unlock: With this setting selected, you will not be required to enter your 4 digit child lock PIN when viewing
freesat Player content. This is the default setting.
Lock Guidance Content: With this setting selected, you will be asked to enter your 4 digit child lock
PIN whenever you wish to watch freesat Player content which is signalled as
“Guidance” (i.e. originally broadcast post watershed).
Lock All Content: With this setting selected, you will be required to enter your 4 digit child lock PIN every
time you wish to watch freesat Player content.
Select the channel / input to be locked
lock
Child Lock List - TV and AV
4
7
14
VCR
1
2
Name
BBC 1 Wales
BBC THREE
E4
BBC1
*****
AV1
AV2/S
Input
DVB
DVB
DVB
Analogue
Analogue
Analogue
External
External
Type
Free TV
Free TV
Free TV
Analogue
Analogue
Analogue
AV
AV
Lock
Lock
Lock
Lock
Lock
Lock
Lock
Lock
select
Appears when the channel / input is locked
■To change the PIN number
Select “Change PIN”
Child Lock
Change PIN
Child Lock List
Access
Enter a new PIN number twice
access
select
54
Note
●To cancel Select the locked channel / input
●To jump to the top of the next input red
●To lock all green
●To cancel all locks yellow
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
●Setting “Shipping Condition” (p. 51) erases the PIN number and all settings.
Input Labels
For easier identification and selection of the input mode, you can label each input mode or skip terminals
that are not connected to any equipment.
●To select the input mode
MENU
EXIT
p. 28
1
Display the menu
2
Select “Setup”
MENU
access
Main Menu
Picture
Sound
Setup
select
BACK/
RETURN
3
5
■To return to TV
EXIT
access
1/2
Off
select
Access
Select “Input Labels”
access
Display Settings
Preferred Subtitle Type
Input Labels
Banner Display Timeout
Playing Time Display
Radio Mode
English
Access
3 seconds
On
Off
select
Select a input terminal and set
Input Labels
AV1
AV2/S
AV3
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
DVD
AV2/S
AV3
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
Input Labels
freesat
DVB
Analogue
Other Sat.
freesat
DVB
Analogue
Other Sat.
1/2
set
select
Advanced
TV
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
freesat Tuning Menu
Othe Sat. Tuning Menu
Display Settings
Network Setup
●Input Labels
●Child Lock
4
Select “Display Settings”
2/2
The labels you set will be displayed in the “Input Selection” menu (p. 28),
“TV Selection” menu (p. 16) or banner.
●If “Skip” is selected, the input will not be displayed in the “Input Selection”
menu and you cannot select the mode.
■User input
You can name each input mode yourself.
Select “User input”
Set characters one by one
(maximum: ten characters)
Store
User input
Name
select
access
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
.!:#
4
2
abc
5
3
set
6
jkl
mno
7
8
9
tuv
BACK/
RETURN
def
ghi
pqrs
select
wxyz
0
●You can set characters by using numeric buttons.
“Characters table for numeric buttons” (p. 96)
55
Owner ID
Entry of the PIN number and personal information (your name, address and postcode).
In the unfortunate event of theft, the Owner ID will help the Police to determine the owner.
MENU
EXIT
1
Display the menu
2
Select “Setup”
MENU
access
Main Menu
Picture
Sound
Setup
select
BACK/
RETURN
3
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
4
■To return to TV
EXIT
5
Select “System Menu”
Setup Menu
DivX® VOD
Advance(isfccc)
System Menu
Other Settings
access
2/2
Off
Access
select
Select “Owner ID”
System Menu
USB Keyboard Layout
Shipping Condition
Owner ID
Common Interface
System Update
Software Licence
System Information
access
English(UK)
Access
select
Set
Input owner ID Owner ID
Enter the PIN number (4 digits)
Owner ID
Please enter new PIN
PIN
* * * *
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
●Enter the PIN number twice at first setting.
●Make a note of the PIN number in case you forget it.
The PIN number cannot be reset.
Enter your name, house number, and postcode, in that order
Select NAME / HOUSE NO / POSTCODE
Owner ID-Data Entry
PIN
NAME
HOUSE NO
POSTCODE
Set characters one by one
Return to select
other items
User input
NAME
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
access
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
select
.!:#
4
ghi
7
pqrs
2
abc
5
jkl
8
tuv
3
def
6
mno
9
wxyz
0
select
BACK/
RETURN
or
Exit the menu
EXIT
set
●You can set characters by using numeric buttons.
“Characters table for numeric buttons” (p. 96)
■To check the personal information stored
Hold down for about 6 sec.
F
Owner ID
NAME
HOUSE NO
POSTCODE
EXIT
F
TV
AV
■To change the PIN number
●The PIN number is not displayed.
Select “PIN”
Owner ID-Data Entry
PIN
NAME
HOUSE NO
POSTCODE
56
Enter a new PIN number twice
access
select
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Using Common Interface
The Common Interface Module menu provides access to software contained on Common Interface (CI)
Modules.
This TV works only Pay TV modules complying with CI standard.
●This function is not available for BSkyB’s Sky channels.
Caution
CI slot
●Remove the cover before
using CI slot.
●Turn Off Mains power On / Off switch whenever inserting
or removing the CI module.
●If a viewing card and a card reader come as a set, first
Insert or remove
straightly and completely
insert the card reader, then insert the viewing card into the
card reader.
●Insert the module in the correct direction.
CI module
Side of the TV
Insert the CI module (optional)
appear, perform the below to verify the card is recognized by the TV.
●For more details, see the manual of the CI module, or check with the broadcaster.
1
Select DVB or Other Sat.
2
Display the menu
INPUT
TV
MENU
EXIT
3
p. 16
TV
MENU
Select “Setup”
●Using Common Interface
●Owner ID
●The features that appear on screen are dependent on the contents of the selected CI module.
●Follow the instructions that came with the viewing card to tune in the pay-TV channels. If pay-TV channels do not
access
Main Menu
Picture
Sound
Setup
5
TV
■To return to TV
Select ”System Menu”
Setup Menu
DivX® VOD
Advance(isfccc)
System Menu
Other Settings
access
2/2
Off
Access
select
Select “Common Interface”
System Menu
USB Keyboard Layout
Shipping Condition
Owner ID
Common Interface
System Update
Software Licence
System Information
access
English(UK)
Access
select
6
Access Common Interface
7
Follow the on screen operation guide
(Check the instructions provided with the CI module)
Common Interface
Slot 1:
Advanced
4
select
Module inserted
For example: select, go
EXIT
Coloured characters
red green yellow blue
●On screen operation guide may not correspond to the remote control
buttons.
57
Updating the TV Software
From time to time, a new version of software may become available for download to enhance the
performance or operations of the TV.
In DVB mode, a notification banner will appear when one of the BBC channels is turned to if a new
available software is found.
●To download
●If you choose not to download
EXIT
You can update any new software automatically, or manually.
MENU
EXIT
1
Display the menu
2
Select “Setup”
MENU
access
Main Menu
Picture
Sound
Setup
3
4
■To return to TV
EXIT
5
select
Select “System Menu”
Setup Menu
DivX® VOD
Advance(isfccc)
System Menu
Other Settings
2/2
access
Off
Access
select
Select “System Update”
System Menu
USB Keyboard Layout
Shipping Condition
Owner ID
Common Interface
System Update
Software Licence
System Information
access
English(UK)
select
Access
Set
Update TV’s software system System Update
■To update automatically
Select “Auto Update Search in Standby” and set to “On”
System Update
●Automatically performs a search in standby and
Auto Update Search in Standby
On
downloads an update, if any software updates are
set
System Update Search Now
available.
select
●The automatic updating is performed at night under
the following conditions:
• Standby (TV turned Off with the remote control)
• Recording of Timer Programming, Direct TV
Recording or One Touch Recording is not in
progress.
If System Update is performed, the software will be updated (it may change TV functions).
If you do not wish to do so, set “Auto Update Search in Standby” to “Off”. The notification
banner will keep appearing during the period of new software availability, usually 2 to 3 days.
■To update immediately
Select “System Update Search Now”
System Update
Auto Update Search in Standby
System Update Search Now
access
Off
Access
select
Note
58
Searches for an update
(for several mins.) and
displays a corresponding
message if any
Download
●Download may take up to 60 mins.
●During software download and update, DO NOT perform any operations on the TV or switch Off the TV.
Displaying PC Screen on TV
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
●To connect PC
p. 92
INPUT
TV
AV
1
Select the external input
2
Select “PC”
TV
■PC menu setting
●To make settings
Menu
access
Input Selection
AV1
AV2/S
AV3
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
Media Server
select
●Corresponding signals p. 98
●If “H-freq.” or “V-freq.” is shown in red,
the signals may not be supported.
“How to Use Menu Functions”
Advanced Settings
Picture
Item
R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Gamma
Reset to Defaults
Clock
(p. 31)
Adjustments / Configurations (options)
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Switches the gamma curve (1.8 / 2.0 / 2.2 / 2.4 / 2.6)
Press the OK button to reset to the default Advanced Settings
Switches to a wide view
●VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●Options change depending on signals
Set to the minimum level if noise occurs
Adjusts horizontal position
Advanced
Input Resolution
to
●Displaying PC Screen on TV
●Updating the TV Software
■To return to TV
AV
H-pos
PC Setup
Setup
Adjusts vertical position
V-pos
Eliminates flicker and distortion
●Adjust after Clock adjustment
●Set to the minimum level if noise occurs
Chooses another synchronous signal if the image is distorted (H & V / On Green)
●H & V : by the horizontal and vertical signals from your PC
Sync
On Green : by the green signal from your PC (if available)
Reset to Defaults Press the OK button to reset to the default PC Setup settings
Clock Phase
●Other items
p. 32 - 36
Note
●For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using
HDMI cable (p. 97).
59
Advanced Picture Settings
You can adjust and setup the detailed picture settings for each Viewing Mode.
●To use this function completely, set “Advance(isfccc)” to “On” in the Setup Menu. p. 35
●For PC input mode, some functions are available without setting “Advance(isfccc)”.
Select the input mode to adjust and setup
1
INPUT
TV
AV
MENU
EXIT
p. 16 and p. 28
TV
AV
2
Display the menu
3
Select “Picture”
MENU
access
Main Menu
Picture
Sound
Setup
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
4
5
select
Select “Viewing Mode” and set the mode
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Colour Balance
Vivid Colour
C.A.T.S.
P-NR
1/2
Dynamic
set
select
Warm
Off
Off
Off
Select one of the following functions
Picture Menu
Picture Display
Advanced Settings
Lock Settings
Copy Adjustment
Reset to Defaults
access
2/2
On
Access
Access
Access
Reset
select
●“Copy Adjustment” is available when
■To return to TV
EXIT
“Viewing Mode” in the Picture Menu is set
to “Professional1” or “Professional2”.
6
Set
Lock the picture setting Lock Settings
Advanced Settings can be locked for each Viewing Mode.
Additionally, Contrast, Brightness, Colour, Sharpness, Tint and Reset to Defaults in the Picture Menu can be
locked for “Professional1” and “Professional2”.
“Professional1” and “Professional2” can be locked for each input.
Enter the PIN number (4 digits)
Lock Settings-PIN Entry
Please enter new PIN
PIN
* * * *
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
●Enter the PIN number twice at first setting.
●Make a note of the PIN number in case you forget it.
Select “Adjustment Lock” and set to “On”
Lock Settings
Change PIN
Adjustment Lock
On
■To change the PIN number
set
select
Select “Change PIN”
Lock Settings
Change PIN
Adjustment Lock
60
Access
On
Enter a new PIN number twice
access
select
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Adjust the detailed picture settings Advanced Settings
●To make settings
Advanced Settings
R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Gamma
Reset to Defaults
Menu
“How to Use Menu Functions”
to
(p. 31)
2.2
Reset
Adjustments / Configurations (alternatives)
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Switches the gamma curve (1.8 / 2.0 / 2.2 / 2.4 / 2.6)
Press the OK button to reset to the default Advanced Settings
■For the mode of “Professional1” or “Professional2” in “Viewing Mode”
●“Professional1” and “Professional2” can be adjusted and set for each input.
●White Balance
●Colour Management
Advanced Settings
White Balance
Colour Management
Gamma
White Balance
R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Reset to Defaults
Access
Access
Access
Menu
White Balance
Gamma
●Gamma
Gamma
Gamma
Reset to Defaults
Reset
Adjustments / Configurations (alternatives)
2.2
Reset
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Press the OK button to reset to the default White Balance
Adjusts the picture hue of red area
Adjusts the picture hue of green area
Adjusts the picture hue of blue area
Adjusts the saturation of red area
Adjusts the saturation of green area
Advanced
Colour Management Gamma
Advanced Settings
Picture
Item
R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Reset to Defaults
R-Hue
G-Hue
B-Hue
R-Saturation
G-Saturation
B-Saturation
Reset to Defaults
Reset
Colour Management
R-Hue
G-Hue
B-Hue
R-Saturation
G-Saturation
B-Saturation
Reset to Defaults
●Advanced Picture Settings
Advanced Settings
Picture
Item
R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Gamma
Reset to Defaults
Adjusts the saturation of blue area
Press the OK button to reset to the default Colour Management
Switches the gamma curve (1.8 / 2.0 / 2.2 / 2.4 / 2.6)
Reset to Defaults Press the OK button to reset to the default Gamma
Copy the settings to the other input Copy Adjustment
You can copy the selected “Professional1” or “Professional2” settings to that of the other input.
The settings of Contrast, Brightness, Colour, Sharpness, Tint and Advanced Settings will be copied.
Select the destination to copy to
Copy Adjustment
Destination
All
select
copy
●You cannot copy to the locked mode.
61
USB HDD Recording
You can record the digital TV programmes to the connected USB HDD and enjoy playing back in various
ways.
●Analogue TV programme cannot be recorded to the USB HDD.
●The data broadcasting (MHEG, etc.), radio broadcasting and the periods without any signal will not be recorded.
●Not all the programmes can be recorded depending on the broadcaster and service provider.
●This TV supports USB HDD with capacity from 160 GB up to 2 TB.
●If the remaining capacity of the USB HDD is run out, the recording cannot be done.
●Regarding the performance, not all USB HDDs are guaranteed.
Check the USB HDDs that have been tested for the performance with this TV at the following website. (English
only)
http://panasonic.jp/support/global/cs/tv/
Caution
●Register the USB HDD with this TV in order to use it for recording. Please note that USB HDD will be formatted
and all data (including the data from your PC, etc.) in it will be erased when you register it.
●In order to use the USB HDD with your PC after you use it with this TV for recording, format the drive on your
PC. To format, refer to the manual of the PC. Please note that all data in the USB HDD will be erased when it is
formatted.
●The data recorded to the USB HDD with this TV can only be played back on this TV. You cannot playback its
contents with another TV (including the TV of the same model number) or any PCs.
●If your TV is repaired due to a malfunction, the registered USB HDD may not be available with your repaired TV.
Register this USB HDD again to use it with your repaired TV. (All data in it will be erased.)
USB HDD connection
Connect the USB HDD to the USB 1 or 2 port.
●Be sure to connect the USB HDD to the
socket outlet
socket outlet.
●Do not turn off or disconnect the USB HDD
during operation. It may cause malfunction
of the drive or damage the recorded data.
●To remove the USB HDD safely from the TV
p. 63 and p. 67
USB
cable
USB HDD
Setting for USB HDD
Register and setup the USB HDD with this TV in order to use it for recording. Connect the USB HDD
before starting this settings. “USB HDD connection” (above)
●Before the settings, be sure to turn on the USB HDD.
●You cannot change the settings for the USB HDD while recording is in progress.
●Please note that USB HDD will be formatted and all data in it will be erased when you register it.
MENU
EXIT
1
Display the menu
2
Select “Setup”
MENU
access
Main Menu
Picture
Sound
Setup
BACK/
RETURN
■To return to TV
EXIT
62
3
4
select
Select “USB HDD Setup”
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
freesat Tuning Menu
Other Sat. Tuning Menu
Display Settings
Network Setup
1/2
access
Off
Access
select
Select “Device Setup” and set
USB HDD Setup
Device Setup
One Touch Recording
Rewind LIVE TV
access
Access
180 minutes
Off
select
Register and setup the USB HDD Device Setup
All the USB devices recognized as a mass storage device will be listed. You can only register USB HDDs.
●Up to 8 USB HDDs can be registered with this TV. However you can only choose one USB HDD for recording
at a time.
●Some USB HDD may not be registered.
Select the USB HDD for recording and start registration / setup
access
USB HDD Device Setup
Connect
Product
Yes
USB Drive A
Yes
USB Flash Disk
Name
Mode
●For the information of the highlighted device
select
●Caution of USB HDD recording and playing back
USB HDD Registration and formatting
Once the USB HDD has been registered, any data
recorded to it from this TV can only be played back on
this TV. If your TV is repaired due to malfunction, any
registered USB HDD may not be recognised.
Would you like to continue?
Yes
select “Yes”
set
No
●Confirmation of USB HDD registration
To use this device for recording, it must be registered
and formatted.
All previous data will be lost.
Would you like to continue?
Yes
select “Yes”
set
No
●Confirmation of USB HDD format
USB HDD Registration and formatting
This device will be formatted and
all contents deleted.
Are you sure?
Yes
select “Yes”
set
No
The name for the registered USB HDD is created
automatically. If you want to edit the name, select “Yes”.
Set characters one by one
Store
●Confirmation of USB HDD name
USB HDD Registration and formatting
Name : USB HDD 1
Edit name?
Yes
select
set
No
USB HDD
Name
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
select
USB HDD 1
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
.!:#
4
ghi
7
pqrs
2
abc
5
jkl
8
tuv
●USB HDD Recording
USB HDD Registration and formatting
BACK/
RETURN
set
3
def
6
mno
9
wxyz
0
“Characters table for numeric buttons” (p. 96)
●Confirmation to enable USB HDD for recording
If the registered USB HDD for recording already exists, this confirmation screen
will be displayed to switch to enable this USB HDD for recording.
USB HDD Registration and formatting
Do you want to enable this device for recording?
When disconnecting any USB device,
always use the “Safely Remove USB” function
in the USB HDD Device Setup menu to avoid
any corruption of recorded content.
Yes
No
USB HDD Device Setup
Connect
Product
Yes
USB Drive A
Yes
USB Flash Disk
Name
Mode
USB HDD 1
Advanced
●You can set characters by using numeric buttons.
: The USB HDD is registered and available for recording / playing
back if the connection status is “Yes”.
Only one registered USB HDD on the list can be available for
recording.
: The USB HDD is registered and available for playing back if the
connection status is “Yes”.
Name is displayed if the registration is completed
Connection status (Yes: connected / No: not connected)
To remove the USB HDD safely from the TV, ensure the status is
“No” before removing.
●To change the status yellow
●You can also remove the USB HDD safely from Media Player
“Remove the USB devices safely” (p. 67)
■To unregister the registered USB HDD
●Once you unregister the USB HDD, it will not be possible to playback any of the recorded content on any TV.
Select the USB HDD
Unregister
red
●The confirmation screen will be displayed twice.
Select “Yes” to unregister.
63
USB HDD Recording
Recording the TV programme to USB HDD
You can record the current programme immediately by using “One Touch Recording”.
You can also record the current programme constantly for the selected period by using “Rewind LIVE
TV” so that you can go back or pause the current programme.
●Ensure the connection, registration and setup are completed before start recording p. 62 and p. 63
●Ensure not to connect or disconnect any USB devices during USB HDD recording. Otherwise the recording may
not work properly.
MENU
1
Display the menu
2
Select “Setup”
MENU
EXIT
IDE
GU
access
Main Menu
Picture
Sound
Setup
3
REC
DVD/VCR
Select “USB HDD Setup”
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
freesat Tuning Menu
Other Sat. Tuning Menu
Display Settings
Network Setup
1/2
access
Off
Access
select
TV
TV
4
■To return to TV
Select “One Touch Recording” or “Rewind LIVE TV”
USB HDD Setup
Device Setup
One Touch Recording
Rewind LIVE TV
180 minutes
Off
select
EXIT
5
64
select
Set
One touch direct TV recording - What you see is What you record One Touch Recording
Recording the current programme in the USB HDD immediately.
Select the maximum recording time (30 / 60 / 90 / 120 / 180 minutes)
USB HDD Setup
Device Setup
One Touch Recording
Rewind LIVE TV
select
180 minutes
Off
■To start One Touch Recording
Set the position to “TV”
DVD/VCR
LED
LED will turn to orange (flash) while
One Touch Recording is in progress.
Start
TV
REC
●No other channel can be selected while the recording is in progress.
■To stop recording on the way
TV
EXIT
or
●USB HDD Recording
IDE
GU
DVD/VCR
■To playback or delete the recorded contents
“Using Media Player” (p. 71) or “Video” in VIERA TOOLS (p. 30)
●Even if One Touch Recording is in progress, you can playback all the contents.
However, the recording may not work properly while playback.
Record constantly Rewind LIVE TV
Recording the current programme constantly.
●This function will not work on MHEG Linked services, i.e. ITV HD and BBC Multiscreen.
Select “On” to start Rewind LIVE TV
USB HDD Setup
Device Setup
One Touch Recording
Rewind LIVE TV
select
180 minutes
On
●When you select “On”, the recording will start automatically.
■To operate the Rewind LIVE TV
Set the position to “TV”
DVD/VCR
TV
search backward
pause
search forward
playback
stop (stops the current
operation and goes
back to live TV)
search backward / forward
pause / playback
and hold for
(press
about a second )
■To stop the Rewind LIVE TV
USB HDD Setup
Device Setup
One Touch Recording
Rewind LIVE TV
180 minutes
Off
playback
Advanced
●To pause
●To search backward
(press and hold for about a second)
●After pausing or searching backward, the following buttons are available to operate.
stop
(
stops the current
operation and
goes back to
live TV
)
select “Off”
●If you stop the Rewind LIVE TV, the recorded content for the Rewind
LIVE TV will be deleted.
●Rewind LIVE TV will be stopped and the recorded content deleted automatically in the following conditions:
(Even if Rewind LIVE TV stops for the following conditions, as long as the setting is “On”, the new recording
will start automatically in a condition that makes the recording available.)
• selected other channels
• selected locked channel
• selected invalid channel
• no TV signal
• when the other recording starts
• when the TV is turned off or standby
65
Using Media Player
Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash
Memory, and recorded contents on the registered USB HDD.
VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card
on the TV screen by simply inserting into the SD Card slot.
Photo mode : Still pictures recorded by digital cameras will be displayed.
Video mode : (For SD Card or USB Flash Memory) Moving pictures recorded by digital video cameras will be
played back.
(For registered USB HDD) TV programmes recorded in USB HDD registered to this TV will be played
back.
Music mode : Digital music data will be played back.
●During the operation, audio signal is output from AV1, AV2, AUDIO OUT and DIGITAL AUDIO OUT terminals,
but no video signals are output. AV1 and AV2 can output audio signal if “AV1 / AV2 out” is set to “Monitor” in the
Setup Menu (p. 34).
●“Date” shows the date on which the recording was made by the recording equipment. The file without record of
the date is shown “**/**/****”.
■Data format for SD Card / USB Flash Memory browsing
●Photo : Still images recorded with digital still cameras compatible with JPEG files of DCF∗ and EXIF standards
Data format - Baseline JPEG (Sub-sampling 4:4:4, 4:2:2 or 4:2:0)
Image resolution - 8 × 8 to 30,719 × 17,279 pixels
●Video : SD-Video Standard Ver. 1.2 [MPEG-2 (PS format)] and AVCHD Standard compatible files with an audio
format that is either MPEG-1/Layer-2 format or Dolby Digital format
(A modified data with a PC may not be displayed correctly.)
DivX p. 83
●Music : Data format - MP3 and AAC (Copy-protected files cannot be played back.)
●SD Card format : SDXC Card - exFAT
SDHC Card / SD Card - FAT16 or FAT32
●Compliant card type (maximum capacity): SDXC Card (64 GB), SDHC Card (32 GB), SD Card (2 GB),
miniSD Card (2 GB) (requiring miniSD adapter)
●If miniSD Card is used, insert / remove it together with the adapter.
●Check the latest information on the card type at the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
●USB Flash Memory format : FAT16, FAT32 or exFAT
(A USB HDD formatted by PC is not surpported in Media Player.)
∗DCF (Design rule for camera file system): Unified standard established by Japan Electronics and Information Technology Industries Association (JEITA).
Note
●Format the device with the recording equipment.
●The picture may not appear correctly on this TV depending on the recording equipment used.
●Display may take some time when there are many files and folders.
●This function cannot display Motion JPEG or still images that are not JPEG format (i.e. TIFF, BMP).
●Data modified with a PC may not be displayed.
●Images imported from a PC must be compatible with EXIF (Exchangeable Image File) 2.0, 2.1, and 2.2.
●Partly degraded files might be displayed at a reduced resolution.
●The folder and file names may be different depending on the digital camera or digital video camera used.
●Do not use two-byte characters or other special codes.
●The device may become unusable with this TV if the file or folder names are changed.
■To insert or remove the SD Card / USB Flash Memory
●For the USB HDD Connection
USB Flash Memory
p. 62
●Insert or remove straightly and completely.
●Before removing the USB Flash Memory, ensure to perform
“Remove the USB device safely” (p. 67)
SD Card
●To insert the SD Card
Gently insert the
SD Card label surface
facing front.
Push until a
click is heard
●To remove the SD Card
Label
surface
●For more information of the SD Card
66
Push the centre of the card
Cutout
p. 94
Starting Media Player
1
Insert the SD Card or USB Flash Memory
●For registered USB HDD, ensure the connection status is “Yes”.
2
Switch to Media Player
●When SD Card is inserted, switching will be done automatically.
SD CARD
3
Start Media Player
p. 63
SD CARD
MENU
EXIT
Media Player
Signal output from all AV terminals will be
disabled during Media Player view.
Press OK to proceed.
Press EXIT to return to TV viewing.
4
BACK/
RETURN
Select the icon you want to access to
Media Player
select
●If two or more devices are not connected,
this step will be skipped.
EXIT
Select
Access
●For the registered USB HDD, all the USB
RETURN
SD Card
HDD of which the connection status is
“Yes” is available.
“Register and setup the USB HDD”
(p. 63)
selected device name
5
■To return to TV
EXIT
or
SD CARD
Select the content
●Using Media Player
access
Drive Select
Media Player
select
access
■To return to
●For registered USB HDD, this step will be
Contents Select
the previous
screen
skipped and recorded contents list will be
displayed. p. 71
EXIT
Select
Access
RETURN
Photo
Video
Music
SD Card
“Photo mode” (p. 68)
“Video mode” (p. 70)
“Music mode” (p. 73)
Change the device
You can change to the other device directly in the same mode if two or more devices are connected.
Select “Drive Select”
Select the icon you want to access to
Display
access
the menu
Main Menu
Picture
select
MENU
Advanced
●Photo
●Video
●Music
BACK/
RETURN
Media Player
Sound
select
access
Photo Setup
Drive Select
Video Setup
EXIT
Select
Music Setup
Access
Drive Select
Safely remove USB
RETURN
SD Card
Appears if the USB device selected device name
is connected to the TV.
Remove the USB devices safely
Before remove the USB devices, please take the following steps in order to protect the devices.
Display
Select “Safely remove USB”
Select the USB Flash Memory or USB HDD to remove
access
set
the menu
Safely remove USB
Main Menu
Product
Name
Picture
MENU
USB Flash Disk
Sound
select
select
Photo Setup
Video Setup
Music Setup
Drive Select
Safely remove USB
Appears if the USB device
is connected to the TV.
67
Using Media Player
Photo mode
Photo mode will read all “.jpg” extension files in the SD Card or USB Flash Memory.
Error display
(images that could not be loaded, etc.)
SD CARD
Media Player
Photo
The thumbnail of all the photos on the SD Card or
USB Flash Memory will be displayed.
●You can also access Photo mode directly by using
VIERA TOOLS.
“How to Use VIERA TOOLS” (p. 30)
●To change the background music
“Photo Setup” (p. 69)
●To display the information of the highlighted photo
All photos
MENU
EXIT
View
Select
EXIT
RETURN
SD Card
Info
View Select
Slideshow
Change Size
Contents Select
(Thumbnail - All photos)
BACK/
RETURN
file number /
total file number
1/48
File name
p1010001.JPG
Date
23/10/2009
Size
1600X1200
selected device name
●To change the number of photos on a thumbnail
screen at a time
yellow
(7 × 4
10 × 6)
■To sort by folder, recorded date or recorded month
Folder view
: Displays the thumbnail grouped by folder
●The files which are not into a folder will be collected to the folder named “/”.
Sort by Date : Displays the thumbnail grouped by the same date
●The group of the photos without recorded date is shown as “Unknown”.
Sort by Month: Displays the thumbnail grouped by the same month
●The group of the photos without recorded date is shown as “Unknown”.
Display the
view selection
Select the
sort type
Select one of the sorted group to display the
thumbnail of the selected group
Media Player
Photo
Sort by Date
select
Folder view
green
Sort by Date
Sort by Month
23/10/2009
25/10/2009
01/11/2009
05/11/2009
10/11/2009
24/11/2009
01/12/2009
03/12/2009
20/12/2009
22/12/2009
22/11/2009
23/11/2009
thumbnail
of the
selected
group
access
Access
Select
select
●To return to the thumbnail
EXIT
or
green
select
“All photos”
SD CARD
■To return to
the previous
screen
SD Card
Contents Select
highlighted group
access
■To return to TV
Info
●To display the information of the
of all photos
TV
EXIT
RETURN
View Select
Slideshow
23/10/2009
1/12
Folder name
23/10/2009
Number of files
3
group number /
total group number
folder name,
date or month
■Single view - Photos are displayed one at a time.
Select the file from the thumbnail of photos to be viewed
●To display / hide the operation guide
select
access
●To operate Single view
BACK/
RETURN
Single view
Rotate
EXIT
Select
RETURN
Slideshow
Single view
Operation guide
(Single view)
To the previous photo
Rotate 90˚ (anti-clockwise)
To the next photo
Slideshow
Rotate 90˚ (clockwise)
●To return to thumbnail
BACK/
RETURN
■Slideshow - Slideshow will complete when all photos have been viewed within the present
thumbnail.
Select the file from the
thumbnail of photos
for the first view
Start
Slideshow
select
red
Note
68
●To display / hide the operation guide
●To pause (return to Single view)
●To return to thumbnail
BACK/
RETURN
●Picture quality may become lower depending on the slideshow settings.
●Picture setting may not work depending on the slideshow settings.
Photo Setup
Choose the settings for Photo mode.
Display
the menu
Select “Photo Setup”
Select the items and set
access
Main Menu
Photo Setup Menu
Back Ground Music
Frame
Colour Effect
Transition Effect
Aspect
Interval
Repeat
Burst Playback
Picture
MENU
select
Sound
Photo Setup
Video Setup
Music Setup
Type1
Off
Off
Fade
Original
5 seconds
On
Off
set
select
Drive Select
●Other items
Menu
Item
Back
Ground
Music
Photo Setup
Colour
Effect
Transition
Effect
Interval
Repeat
Burst
Playback
Advanced
Aspect
●Using Media Player
Frame
p. 32, 33, 67, 72 and p. 73
Adjustments / Configurations (alternatives)
Selects the back ground music during the Photo mode
(Off / Type1 / Type2 / Type3 / Auto / User)
●Type1, Type2 and Type3 are the fixed music each installed in this TV.
Auto : Music data stored in the root folder of the SD Card will be played back randomly.
●If there is no available music data, no sound will be produced.
User : Music data in the current device registered by yourself in Music mode will be played back.
●To register the music “Set background music for Photo mode” (p. 61)
●If no music has been registered or the registered music device are removed, no sound
will be produced.
Selects the frame type of the slideshow
(Off / Multi / Collage / Drift (+ calendar) / Drift / Gallery (+ calendar) / Gallery / Cinema)
Multi
: 9 photos are displayed orderly at once.
Collage : Each photo is displayed at a random position and random scale.
Drift (+ calendar) / Drift
: Photos are displayed like flow images.
●You can select to display the calendar or not. The month of
calendar is turned by pressing up or down cursor button.
Gallery (+ calendar) / Gallery : The various size of photos in the frame are displayed.
●You can select to display the calendar or not. The month of
calendar is turned by pressing up or down cursor button.
Cinema : Photos are displayed like old films (sepia tone)
Selects the colour effect of photos on Single view and Slideshow (Off / Sepia / Gray scale)
●This function is not available when “Frame” is set to “Drift”, “Gallery” or “Cinema”.
Selects the transition effect for switching the photo during the slideshow
(Off / Fade / Slide / Dissolve / Motion / Random)
Fade : The next photo fades in gradually.
Slide : The next photo slides and appears from the left side.
Dissolve : Each photo is dissolved when switching to the next photo.
Motion : Each photo is displayed with an effect of enlarging, reducing, moving up or moving down.
Random : Each transition is selected at random.
●This function is available when “Frame” is set to “Off”.
Selects whether enlarged or original viewing on Single view and Slideshow (Original / Zoom)
●This function is not available when “Frame” is set to “Collage”, “Drift”, “Gallery” or “Cinema”.
●This function is not available when “Transition Effect” is set to “Motion”.
●Depending on the photo size, it may not be fully enlarged to fill the screen, e.g. portrait style
picture.
Selects slideshow interval (5 / 10 / 15 / 30 / 60 / 90 / 120 seconds)
●This function is not available when “Frame” is set to “Drift”, “Gallery” or “Cinema”.
●This function is not available when “Transition Effect” is set to “Motion”.
Slideshow repeat (Off / On)
Selects whether the continuous shots are displayed in rapid interval during the slideshow
(Off / On)
●This function is not available when “Frame” is set to “Drift”, “Gallery” or “Cinema”.
●This function is not available when “Transition Effect” is set to “Motion”.
Change the contents
You can switch to the other mode of the Media Player from the thumbnail view.
●The mode can be switched in the current device.
●To change the device “Change the device” (p. 67)
While the thumbnail is displayed,
display the contents selection
Select the contents
Media Player
Photo
All photos
select
access
blue
Contents Select
EXIT
Select
Access
RETURN
View
Select
SD Card
Slideshow
EXIT Photo
RETURN
View Select
Video
Info
Change Size
Music
SD Card
Contents Select
●Photo
●Video
●Music
“Photo mode” (p. 68)
“Video mode” (p. 70)
“Music mode” (p. 73)
69
Using Media Player
Video mode
For SD Card or USB Flash Memory
Video mode supports AVCHD, MPEG2 and DivX® file formats.
Film icon will be displayed
if the file does not support
thumbnail view.
SD CARD
Media Player
Error display
(images that could not be loaded, etc.)
Video
Title view
MENU ASPECT
EXIT
Trip1
Trip2
Trip3
Trip4
Trip5
Room
Nature1
Nature2
Nature3
Nature4
Nature5
Nature6
2009_4
2009_7
2009_9
Access
EXIT
RETURN
Select
SD Card
Info
Play
Contents Select
(Thumbnail - Title view)
BACK/
RETURN
OPTION
The thumbnail of video titles on the SD Card or USB
Flash Memory will be displayed.
The preview will start when the title is highlighted if it
supports a preview.
●You can also access Video mode directly by using
VIERA TOOLS
“How to Use VIERA TOOLS” (p. 30)
●To turn off the preview “Video Setup” (p. 72)
●To display the information of the highlighted title
selected device name
1/15
■Playback from Title view
Title
Trip1
Trip1
Date & Time
19/02/2009 11:21
Number of scenes
8
Duration
00h15m39s
Playback of the selected title will start.
Select the title
Start playback
STTL
file format
title number /
total title number
select
red
●DivX contents cannot be played back from Title view. Select DivX
folder and press the OK button to display DivX files, and then
select one of the file to be played back.
■Playback from the selected scene in the title (AVCHD or MPEG2)
Playback will start from the selected scene to the end of the title.
Select the title
Select the scene to start playback
Media Player
select
Trip1_1
Video
Trip1_2
Title view > Trip1
Trip1_3
Trip1_4
Trip1_5
Trip1_6
select
Trip1_7
access
playback
Trip1_8
Play
Select
The preview will start when the scene
is highlighted if it supports a preview.
●To turn off the preview
“Video Setup” (p. 72)
(Thumbnail - Scene view)
●To display the information of the highlighted scene
EXIT
RETURN
SD Card
Info
Contents Select
DVD/VCR
TV
●To repeat playback
“Video Setup” (p. 72)
TV
■To return to TV
EXIT
or
SD CARD
■To return to the
previous screen
BACK/
RETURN
titles and scenes
may vary depending
on the digital video
camera used.
Trip1_1
Date & Time
19/02/2009 11:21
Duration
00h04m12s
●To display / hide the operation guide
and information banner
●To operate the playback
Rewind
Pause / Playback
Playback
Fast forward
Stop
EXIT
RETURN
Title
Date & Time
Trip1
19/02/2009
11:21
00:02.05 / 00:15.39
Operation guide
(Playback)
Information banner
(only for the 4:3 video content)
●The structure of
scene number / total scene number
Scene
■How to operate in the playback
●To change aspect
Note
file format
1/8
Trip1
ASPECT
●To the previous scene
●To the next scene
BACK/
RETURN
●To return to thumbnail
●You can also use the following buttons. (p. 29)
Set the position to “TV”
DVD/VCR
TV
●To confirm or change the current status (if available)
OPTION
70
Example:
Option Menu
Multi Audio
DivX Subtitle
Audio1
Subtitle1
change
select
■To change the content in the current device
“Change the contents” (p. 69)
green
red
For registered USB HDD
Remaining capacity of the HDD
●This value may not be accurate depending on the condition.
Media Player USB HDD recordings
Date
Time
Title
BBC 1
Wed 28/10
12:00
Eastender
ITV
Sun 10/01
13:30
News
Fri 15/01
13:50
Cinema
Channel
BBC 2
Contents list of the registered USB HDD will be displayed.
●You can also access the contents list directly by using
VIERA TOOLS.
“How to use VIERA TOOLS” (p. 30)
●To display the information of the highlighted content
Remaining Capacity 500GB (50%)
G
Select
Channel :
DVB, BBC 1
Title :
EXIT
RETURN
Play
Eastender
Date & Time :
Wed 28/10/2009 12:00
Duration :
00:20
USB HDD 1
Info
Delete
●Using Media Player
Content under recording
●You can playback this content even if under recording.
Content not played back
●Once you playback the content, this icon will disappear.
Appears when the recorded content has the guidance information (parental
rating, etc.) or the channel of the content is restricted by Child Lock.
This content requires entering PIN number to playback.
■Playback the content from the list
Select the content
Start playback
select
■Delete the selected content
Select the content
Delete the content
Confirm
Delete
DVB, BBC 1
Eastender
Wed 28/10/2009 12:00
00:20
red
select
■How to operate in the playback
●To display / hide the operation guide and information banner
Advanced
●To operate the playback
Rewind
Pause / Playback
Playback
Fast forward
Stop
EXIT
RETURN
Title
Date & Time
Eastender
28/10/2009
19:35
00:02.05 / 00:15.39
Operation guide
(Playback)
Information banner
●To change aspect ASPECT
●To display the subtitle STTL
(if available)
BACK/
RETURN
●To return to list
●You can also use the following buttons. (p. 29)
Set the position to “TV”
DVD/VCR
TV
(press and hold)
●To confirm or change the current status (if available)
OPTION
Example:
Option Menu
Multi Audio
Monaural Audio
eng
eng
change
select
Note
●Depending on the recorded programmes, some playback operations may not work properly.
71
Using Media Player
Sound Settings
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT terminal.
■To confirm or change the current sound status (during playback)
Display the Option menu
OPTION
Change the sound (if the video has multiple audio signals)
Example:
Option Menu
Multi Audio
●It may take several seconds to change the sound.
change
Stereo
(current sound status)
■Audio output settings
Display
the menu
Select “Sound”
Main Menu
Select “SPDIF Selection” and set
access
Sound Menu
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to Wall
SPDIF Selection
Picture
MENU
Sound
select
Photo Setup
Video Setup
Music Setup
Drive Select
Menu
Item
Sound
SPDIF
Selection
1/2
Music
set
select
Off
Over 30cm
Auto
Adjustments / Configurations (alternatives)
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal
(Auto / PCM)
Auto: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as PCM.
PCM: Digital output signal is fixed to PCM.
Video Setup
Choose the settings for Video mode.
●These settings are not available for the registered USB HDD.
Display
the menu
Select “Video Setup”
Main Menu
Picture
MENU
Select “Other Settings”
Video Setup Menu
Display Settings
Other Settings
Access
Sound
Photo Setup
Music Setup
●Other items
p. 32, 33, 67, 69 and p. 73
Menu
Other
Settings
Video
Setup
72
Item
Other Settings
Intelligent Frame Creation
16:9 Overscan
Video Preview
Repeat
Max
On
On
Off
access
Video Setup
Drive Select
Select the items and set
select
●Display Settings
p. 35
set
select
●Other items
p. 36
Adjustments / Configurations (alternatives)
Sets to start the preview of the title or scene in the thumbnail screen (Off / On)
Video
●Image may not be displayed for an instant in the thumbnail screen. Set the preview
Preview
“Off” to resolve this.
Playback repeat within the title (Off / On)
Repeat
●Only the selected file will be repeated for DivX contents.
Music mode
Music mode supports MP3 and AAC file format.
Media Player
SD CARD
My Music_1
Music
My Music_2
The thumbnail of music folders in the SD Card or USB
Flash Memory will be displayed.
●You can also access Music mode directly by using
VIERA TOOLS
“How to use “VIERA TOOLS” (p. 30)
●To display the information of the highlighted title
Folder view
My Music_3
MENU
EXIT
Access
Select
EXIT
RETURN
1/3
Folder name
My Music_1
Number of files
11
SD Card
Info
Play Folder
My Music_1
Contents Select
selected device name
BACK/
RETURN
folder number /
total folder number
■Playback from Folder view
Playback all the files in the selected folder will start.
Select the folder
Start playback
select
red
■Playback from File view
Playback of the selected file will start.
Select the file to start playback
Media Player
select
Music
Folder view > My Music_1
My Song_1
My Song_2
My Song_3
My Song_4
My Song_5
My Song_8
My Song_9
My Song_10
My Song_11
My Song_6
select
My Song_7
access
playback
●To display the information of the
highlighted title
Play
Select
EXIT
RETURN
SD Card
Info
1/11
Contents Select
Title
My Song_1
My Song_1
Album
file number /
total file number
My Music_1
Artist
My Favorite
Track No.
1
Duration
■To return to TV
EXIT
or
00h03m29s
■How to operate in the playback
●Using Media Player
Select the folder
●To display / hide the operation ●To the previous track
guide and information banner
SD CARD
red
My Song_9
My Favourite
My Music_1
1
00:02.43 / 00:05.44
●To operate the playback
●To the next track
EXIT
■To return to
BACK/
RETURN
USER BGM
Operation guide
(Playback)
information banner
green
●To return to thumbnail
BACK/
RETURN
■To change the content in the current device
“Change the contents” (p. 69)
Music Setup
Advanced
the previous
screen
Rewind
Pause / Playback
Playback
Fast forward
Stop
RETURN
Setup the setting for Music mode.
Display
the menu
MENU
Select “Music Setup”
Main Menu
access
Picture
Sound
Set
Music Setup Menu
Repeat
One
set
select
Photo Setup
Video Setup
Music Setup
Folder : Playback repeat within the selected folder
One : Playback repeat of the selected one file
Drive Select
Set background music for Photo mode
You can register your favourite music as background music for Photo mode.
●Select “User” in “Back Ground Music” “Photo Setup” (p. 69)
●If you remove the device in which the registered music is stored, the setting of “User” will be reset.
While playing
music, display the
selection screen
Select “File” or “Folder” and set
Register Slideshow BGM?
File
Folder
blue
: The current music will be
registered as back ground music.
select Folder : All the music in the current folder
will be registered as back ground
music.
set
File
73
Using Network Services
(DLNA / VIERA CAST / freesat)
DLNA®
This TV is a DLNA Certified™ product.
DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier
and more convenient to use on a home network. To learn more, visit www.dlna.org.
It allows you to share photos and videos stored in the DLNA Certified media server (for example, PC with
windows 7 installed, DIGA Recorder etc.) connected to your home network, and enjoy watching them on
the TV screen.
■Applicable data format
Photo : JPEG (Sub-sampling 4:4:4, 4:2:2 or 4:2:0)
Image resolution - 8 × 8 to 30,719 × 17,279 pixels
●MOTION JPEG and Progressive JPEG are not supported.
Video : MPEG-2 (PS format and TS format)
●AVCHD and DivX files are not supported by DLNA, but can be played by Media Player (p. 70).
●Music files are not supported by DLNA, but MP3 and AAC files can be played back by Media Player (p. 73).
■Media server
Ensure the connected equipment has a DLNA Certified media server.
To use the PC, install the server software on the PC for obtaining a media server.
Store photos or videos into the media server, and then you can watch them on the TV.
“TwonkyMedia server 5.1.x” and “Windows 7” are the server software that has been tested for the performance
with this TV (current as of January, 2010).
For installing, read the manual of the server software.
●The DLNA control function of Windows 7 is not supported with this TV.
●When a server software for the media server is installed on the PC, the data may be at risk of being accessed
by other people. Please take care of the settings and connections under the network circumstances at the
office, hotel or even at home when not using a router.
By connecting a DLNA compatible DIGA Recorder to your home network, you can enjoy and control it as one of
the media servers.
●For details, read the manual of the DIGA Recorder.
■Network connection
Example 1 or Example 2 in “Network connections” (p. 75)
■Network setup
p. 76 - 79
■DLNA operations
p. 80 - 82
VIERA CAST™
VIERA CAST is a gateway to the internet services unique to Panasonic.
By connecting the TV to the internet environment, VIERA CAST allows you to enjoy internet content on
the TV screen such as photos, videos, weather, etc. from VIERA CAST home screen.
You can access VIERA CAST home screen directly by pressing the VIERA CAST button on the remote
control.
■Network connection
Example 1 or Example 3 in “Network connections” (p. 75)
■Network setup
p. 76 - 79
■VIERA CAST operations
p. 83
freesat
freesat will give you access to the great interactive services and features through an internet connection.
●Please contact broadcasters for availability of services.
74
Network connections
To use only DLNA features, you can operate the features without Broadband network environment.
To use VIERA CAST features or freesat interactive services, you need a Broadband network
environment.
●If you do not have a Broadband network services, please consult your retailer for assistance.
●Confirm the terms and conditions of the contracts with your Internet Service Provider (ISP) or telecommunications
company.
●Set up and connect any equipment required for the network environment.
●Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively.
●Read the manual of the network equipment, too.
Internet
LAN cable (Shielded)
Modem
■Wireless LAN connection
You can connect to the network by using
a Wireless LAN Adaptor : DY-WL10E-K
(optional accessory p. 6) and an access point.
Hub, Router
or
Access point
DLNA Certified
media server
(for example, PC,
DIGA Recorder, etc.)
●Ensure to use a LAN straight cable for this connection.
●If your modem has no broadband router functions, use a broadband router.
●If your modem has broadband router functions but there are no vacant ports, use a hub.
●Ensure that the Broadband routers and hubs are compatible with 10BASE-T / 100BASE-TX.
●If you use the equipment compatible only with 100BASE-TX, category 5 LAN cables are required.
●Using Network Services
(DLNA / VIERA CAST / freesat)
■Example 1
■Example 2
You can connect the TV and the equipment directly to use DLNA features.
DLNA Certified
media server
(for example, PC,
DIGA Recorder, etc.)
Advanced
LAN cable (Shielded)
●Ensure to use a LAN cross cable for this connection.
■Example 3
You can connect the TV and the telecommunication equipment directly to use VIERA CAST features.
Internet
LAN cable (Shielded)
Modem
Note
●Depending on the ISP or telecommunications company, the required equipment and the internet connection
procedure are different. Ensure that you use the network equipment that are authorized by your ISP and
telecommunications company.
●You cannot make settings for the network equipment on this TV. You may be required to make settings on your
computer.
●Depending on the terms and conditions of the contracts with your ISP or telecommunications company, additional
fees may be charged or multiple connections to the internet may be impossible.
●Please contact your ISP or telecommunications company if you require further assistance regarding the network
equipment.
75
Using Network Services
(DLNA / VIERA CAST / freesat)
Network Setup
●Ensure the connections are completed before starting Network Setup.
“Network connections” (p. 75)
MENU
1
Display the menu
2
Select “Setup”
MENU
EXIT
access
Main Menu
Picture
Sound
Setup
BACK/
RETURN
Select “Network Setup”
3
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
■To return to TV
EXIT
select
Setup Menu
Timer Programming
Off Timer
USB HDD Setup
Link Settings
Child Lock
freesat Tuning Menu
Other Sat. Tuning Menu
Display Settings
Network Setup
4
access
1/2
Off
select
Access
Set
Edit the name of this TV
You can set your favourite name for this TV. This name will be used to display the name of this TV on the
screen of the other DLNA compatible equipment.
Select “VIERA Name”
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Edit the name
access
Wired
---
VIERA Name
Name
select
Store
Set characters one by one
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
select
VIERA
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
VIERA
1
.!:#
4
ghi
7
pqrs
ab-cd-ef-gh-ij-kl
2
abc
5
jkl
8
tuv
3
set
def
6
mno
9
wxyz
0
●You can set characters by using numeric buttons.
“Characters table for numeric buttons” (p. 96)
Update TV’s software
Accesses the specific web site to update TV’s software and search if any software updates are available.
Select “Software Update”
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Wired
---
access
select
VIERA
Access
ab-cd-ef-gh-ij-kl
●Follow the on screen instructions
Note
MAC Address
●MAC address is a unique address that identifies hardware in the network.
(for information only)
76
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Wired
---
VIERA
ab-cd-ef-gh-ij-kl
BACK/
RETURN
Network settings for the LAN Cable connection
This setting is for the network connection by using the LAN cable.
Select “Network Type” and set to “Wired”
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Wired
---
If you make the network connection like
“Example2” (p. 63), you do not have to set
“Acquire DNS Address”, “Proxy” and “Proxy Port”.
set
select
VIERA
ab-cd-ef-gh-ij-kl
Select “IP/DNS Settings” and set the items
access
Wired
--Access
select
BACK/
RETURN
After settings, return to “Network Setup” screen
VIERA
ab-cd-ef-gh-ij-kl
■Acquire IP Address
■Acquire DNS Address
Sets IP Address, Subnet Mask, Gateway, Primary DNS and Secondary DNS.
For most users, the recommended method of connection to your network is by using Auto feature.
Select “Acquire IP Address” and then set to “Auto”
Select “Acquire DNS Address” and then set to “Auto”
IP/DNS Settings
Acquire IP Address
IP Address
Subnet Mask
Gateway
Acquire DNS Address
Primary DNS
Secondary DNS
Auto
.
.
.
Auto
.
.
.
.
.
.
.
.
.
.
.
.
set
select
Manual settings
If you wish to set these functions manually, select “Manual”.
Select “IP Address”, “Subnet
Move the cursor and
Mask”, “Gateway”, “Primary
enter the number
DNS” or “Secondary DNS”
●The available settings are
move
displayed automatically.
select
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Select “Proxy Settings” and set the items
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Wired
--Access
VIERA
●Using Network Services
(DLNA / VIERA CAST / freesat)
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
access
select
BACK/
RETURN
After settings, return to “Network Setup” screen
ab-cd-ef-gh-ij-kl
■Proxy
Select “Proxy”
Proxy Settings
Proxy
Proxy Port
Enter the address
access
Store
Set characters one by one
select
Proxy
0
Host
select
A
U
a
u
B
V
b
v
http://
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
.!:#
2
abc
4
5
6
jkl
mno
7
8
9
tuv
set
3
def
ghi
pqrs
BACK/
RETURN
Advanced
Sets Proxy address.
●This is the address of the relay server that is connected to the target server instead of the browser and
sends data to the browser. Setting is required if specified by the provider.
wxyz
0
●You can set characters by using numeric buttons.
“Characters table for numeric buttons” (p. 96)
■Proxy Port
Sets Proxy port number.
●This number is also specified by the provider with the Proxy address.
Select “Proxy Port”
Proxy Settings
Proxy
Proxy Port
Move the cursor and enter the number
move
0
select
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Select “Connection Test” and access to test
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Wired
---
access
select
Access
VIERA
ab-cd-ef-gh-ij-kl
Performs automatic testing of the network
connection for the TV. (It takes a while to test.)
Connection Test
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA CAST.
: succeeded
The test is successful
and the TV is connected
to the network.
: failed
Check the settings and
connections, and then
perform this function
again.
77
Using Network Services
(DLNA / VIERA CAST / freesat)
Network settings for the Wireless LAN connection
This setting is for the network connection by using Wireless LAN Adaptor. (Wireless LAN connection)
Select “Network Type” and set to “Wireless”
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Wireless
No settings
set
select
VIERA
ab-cd-ef-gh-ij-kl
Select “Access Point Settings”
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
access
Wireless
No settings
select
VIERA
ab-cd-ef-gh-ij-kl
Select the connection type and set
Connection Type
Please select network connection type.
WPS(Push button)
WPS(PIN)
Search for access point
Manual
access
●For details of each connection type
p. 79
select
After settings, return to “Network Setup” screen
Confirm the connection status of “Access Point Settings”
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Wireless
Connected
VIERA
--No adaptor
No settings
Connecting...
Connected
ab-cd-ef-gh-ij-kl
USB
overcurrent
: “Wired” is selected in “Network Type”.
: Wireless LAN Adaptor is not connected.
: Setting for connecting to the access point has not been set.
: Connecting to the access point in progress.
: Wireless LAN connection to the access point succeeded.
●To display the current access point settings, press the
OK button.
To change the settings, select “No” on this screen.
●Some access points do not allow access to the internet.
Perform “Connection Test” (below) to check if internet
connection is available.
: Overcurrent error
p. 101
Select “Connection Test” and access to test
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Wireless
Connected
access
select
Access
VIERA
ab-cd-ef-gh-ij-kl
Performs automatic testing of the network
connection for the TV. (This may take some time.)
78
Connection Test
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA CAST.
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections, and then perform
this function again.
If you continue to have difficulty, please contact your
internet service provider.
■WPS(Push button)
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN Adaptor and the
access point.
WPS(Push button)
1) Please press the ‘WPS’ buttton on the access
point until its light flashes.
2) When light is flashing select ‘Connect’ on TV.
If you are unsure, please check the instruction
manual of the access point.
Connect
●Ensure that your access point supports WPS for this setup.
●WPS: Wi-Fi Protected Setup
■Search for access point
No.
SSID
1
Access Point A
11n(2.4GHz)
2
Access Point B
11n(5GHz)
3
Access Point C
Wireless type
11n(5GHz)
Encrypt
Reception
●To search access points again
●For the information of the
access
select
highlighted access point
●To set manually
: Encrypted access point
●If the selected access point is not encrypted, the confirmation screen will be
Please input the encryption key.
displayed. It is recommended to select the encrypted access point.
Encryption key
Access Point Settings
Encryption key
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
red
Access the encryption key input mode
Encryption Key Setting
Connection will be made with the following settings:SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
A
U
a
u
yellow
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
2
abc
def
4
5
6
ghi
7
jkl
8
tuv
BACK/
RETURN
select
3
.!:#
pqrs
Enter the encryption key of the access point
Set characters one by one
Store
●Using Network Services
(DLNA / VIERA CAST / freesat)
Access points found automatically are listed.
Select your desired access point
Available Access Points
mno
9
wxyz
set
0
●You can set characters by using numeric buttons.
“Characters table for numeric buttons” (p. 96)
Select “Yes”
Access Point Settings
Encryption key is set to:XXXXXXXX
select
confirm
Select ‘Yes’ to confirm.
Select ‘No’ to change.
Yes
No
■WPS(PIN)
Available Access Points
No.
SSID
Wireless type
1
Access Point A
11n(2.4GHz)
2
Access Point B
11n(5GHz)
3
Access Point C
11n(5GHz)
Encrypt
Reception
Select your desired access point
access
select
●Ensure that your access point
supports WPS for this setup.
●To search access points again
yellow
●For the information of the
highlighted access point
●To set manually
WPS(PIN)
Please register the following PIN codes on the
access point.
PIN code : 12345678
red
Enter the PIN code to the
access point, and then select
“Connect”
■Manual
You can setup SSID, authentication type,
encryption type, and encryption key manually.
Follow the on screen instructions and set
manually.
●When you use 11n (5GHz) for the wireless
system between the Wireless LAN Adaptor
and access point, please select “AES” for
the encryption type.
Advanced
●To re-enter the encryption key, select “No”.
Access Point Settings
Please input the SSID.
SSID
XXXXXXX
SSID Setting
SSID is set to:XXXXXXX
Select ‘Yes’ to confirm.
Select ‘No’ to change.
Yes
No
Select ‘Connect’ after entering and saving
settings on the access point.
Connect
Authentication Type Settings
Connection will be made with the following settings:SSID : XXXXXXX
Please select the authentication type.
WPA2-PSK
WPA-PSK
Shared key
Open
79
Using Network Services
(DLNA / VIERA CAST / freesat)
Using DLNA® features
●Ensure the preparation of media server, network connections and network settings are completed.
“Media server” (p. 74), “Network connections” (p. 75), “Network Setup” (p. 76 - 79)
INPUT
AV
1
Display the Input select menu
2
Select “Media Server”
AV
MENU ASPECT
EXIT
BACK/
RETURN
OPTION
3
access
Input Selection
AV1
AV2/S
AV3
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
Media Server
select
●You can also access directly by using
VIERA TOOLS
“How to Use VIERA TOOLS” (p. 30)
Select one of the media servers you want to access
access
Media Server
A
5
g
Select
SERVER1
SERVER2
SERVER3
DIGA
select
●To display the information of the highlighted
EXIT
RETURN
Access
4
Info
(Media server list)
Available media servers
TV
■To return to TV
EXIT
4
SERVER1
Pixel
3648x2736
Format
JPEG
EXIT
RETURN
BACK/
RETURN
80
Total listed number
access
Media Server
View
the previous
screen
blue
Select the file (photo or video) to be viewed
Select
■To return to
media server
or
Slideshow
P000102
P000135
P000180
P000214
P000251
P000276
P000293
M10025
M10042
M10054
M10078
2008-10-05
2008-11-20
2008-12-07
2008-12-10
2008-12-19
2008-12-25
2009-01-06
2009-01-12
2009-01-20
2009-01-28
2009-02-09
09:54
13:18
11:31
15:20
12:39
14:06
13:52
15:56
10:08
14:48
19:58
28
Info
(File list)
select
●Depending on the conditions of media
server, you may need to select the folder
before selecting the file.
●To display the information of the highlighted
file
or blue
For photo file
■Single view - Photos are displayed one at a time.
●To display / hide the operation guide
●To operate Single view
To the previous photo
Rotate 90˚ (anti-clockwise)
To the next photo
Slideshow
Rotate 90˚ (clockwise)
Single view
Rotate
EXIT
Select
RETURN
Slideshow
Single view
Operation guide
BACK/
RETURN
●To return to list
■Slideshow - Slideshow will be started from the selected photo file and completed within the list.
●To display / hide the operation guide
●To pause (return to Single view)
Start Slideshow
red
BACK/
RETURN
●To return to list
For video file
■Playback - Playback will start.
●To display / hide the operation guide and information banner
●To operate the playback
Rewind
Pause / Playback
Playback
Fast forward
Stop
EXIT
RETURN
Title
Date & Time
Trip1
19/02/2009
11:21
00:02.05 / 00:15.39
Operation guide
(Playback)
Information banner
●Using Network Services
(DLNA / VIERA CAST / freesat)
(Single view)
●To the previous scene
green
(only for the 4:3 video content)
●To return to list
ASPECT
BACK/
RETURN
Advanced
●To the next scene
●To change aspect
red
For DIGA Recorder
■Control the DIGA Recorder
The screen of the DIGA Recorder will be displayed. You can control the functions of the DIGA Recorder with
this TV remote control according to the operation guide.
●Before operating, register this TV on the DIGA Recorder.
●For details, read the manual of the DIGA Recorder.
Example:
DIRECT NAVIGATOR (Grouped Titles)
All
Not Viewed
Movie
19.08(Wed) Journal Télévisé / Météo
AV1
19.08(Wed)
Video (AVCHD)
Bibel TV das Gespräch
19.08(Wed)
OK
RETURN
Time Remaining 36:17 (DR)
Sports
Liberty TV FR
Bibel TV
Select
HDD
Social/Economy
Start Time 11:01
Titles 27
WDR Aachen
18.08(Tue) WDR aktuell
WDR Wuppertal
18.08(Tue) WDR aktuell
Page 005/005
OPTION
Delete Title
Note
●You may select and playback the music file.
●Non-playable files are also listed but cannot be selected.
●Turn the TV off, and then on again when changing or reconnecting the network connection.
81
Using Network Services
(DLNA / VIERA CAST / freesat)
Photo Setup (for photo contents) and Video Setup (for video contents)
Choose the settings for Photo and Video file operations.
Display
the
menu
Select “Photo Setup” or
“Video Setup”
Main Menu
Select the items and set
access
Photo Setup Menu
Back Ground Music
Transition Effect
Interval
Repeat
Picture
MENU
select
Sound
Photo Setup
Type1
Fade
5 seconds
On
Select “Other Settings”
Video Setup
Video Setup Menu
Display Settings
Other Settings
Music Setup
●Other items
Select the items and set
Other Settings
Intelligent Frame Creation
16:9 Overscan
Video Preview
Repeat
Access
Max
On
On
Off
Photo Setup
p. 32, 33, 35, 36 and p. 73
Menu
Item
Adjustments / Configurations (alternatives)
Selects the back ground music while photo (Off / Type1 / Type2 / Type3 / User)
●Type1, Type2 and Type3 are the fixed music each installed in this TV.
User : Music data registered by yourself in Music mode will be played back.
Back Ground
●To register the music “Set background music for Photo mode” (p. 61)
Music
●Only available music files can be registered.
●If no music has been registered, or you change to the other media server, no
sound will be produced.
Selects the transition effect for switching the photo during the slideshow
(Off / Fade / Slide / Dissolve / Motion / Random)
Fade
: The next photo fades in gradually.
Transition Effect Slide
: The next photo slides and appears from the left side.
Dissolve : The photo is replaced by an indefinite block unit.
Motion : The photo is replaced with enlarged, reduced, moved up or moved down.
Random : Each transition is selected at random.
Selects slideshow interval (5 / 10 / 15 / 30 / 60 / 90 / 120 seconds)
Interval
●This function is not available when “Transition Effect” is set to “Motion”.
Repeat
Slideshow repeat (Off / On)
Sets to start the preview of the title or scene in the thumbnail screen (Off / On)
Video
●Image may not be displayed for an instant in the thumbnail screen. Set the
Preview
preview “Off” to resolve this.
Repeat
Playback repeat within the title (Off / On)
Other
Settings
Video
Setup
Sound Settings (for video contents)
You can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT terminal.
■To confirm or change the current sound status (during playback)
Display the Option menu
OPTION
Change the sound (if the video has multiple audio signals)
Example:
Option Menu
Multi Audio
change
Stereo
●It may take several seconds to change the sound.
(current sound status)
■Audio output settings
Display
the menu
Select “Sound”
Main Menu
Picture
MENU
Sound
Photo Setup
Video Setup
Music Setup
Menu
Sound
82
Select “SPDIF Selection” and set
access
Item
SPDIF
Selection
select
Sound Menu
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Speaker Distance to Wall
SPDIF Selection
1/2
Music
set
select
Off
Over 30cm
Auto
Adjustments / Configurations (alternatives)
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal
(Auto / PCM)
Auto: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as PCM.
PCM: Digital output signal is fixed to PCM.
VIERA CAST™
You can access a selection of internet services from VIERA CAST home screen. For example, YouTube,
Picasa Web Albums (current as of March, 2010).
●VIERA CAST requires a broadband internet connection. Dial-up internet connections cannot be used.
●Ensure the network connections and network settings are completed.
“Network connections” (p. 75), “Network Setup” (p. 76 - 79)
EXIT
Access VIERA CAST
●Depending on the usage conditions,
Example:
it may take a while to read all the
data.
Welcome to VIERA CAST™
VIERA CAST™ home screen is subject to change without notice.
The services through VIERA CAST™ are operated by their respective service providers, and service may
be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no
warranty for the content or the continuity of the services.
All features of websites or content of the service may not be available.
Don’t show this message again
ENTER
Some content may be inappropriate for some viewers.
Some content may only be available for specific countries and may be presented in specific languages.
BACK/
RETURN
●Messages might be displayed before
Example:
Setup & Help
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
●Video communication
■To return to TV
(ex. Skype™) requires an exclusive
Communication Camera TY-CC10W
(optional accessory p. 6).
For details, read the manual of the
Communication Camera.
MORE
BACK
EXIT
VIERA CAST home screen
■How to operate VIERA CAST (current as of March, 2010)
●To go to the next level Select “MORE”
●To back to the previous level Select “BACK”
●When the key words are displayed on colour bar
●When options with numbers are displayed
■USB Keyboard
abc
red green yellow blue
def
ghi
jkl
mno
pqrs
tuv
wxyz
(Items in the “Setup & Help” may
change without notice.)
Changes the position
Customize
of each services on
HomeScreen
VIERA CAST home screen
Confirms or removes the
My Account account information of the TV
you entered on VIERA CAST
Sets to restrict access to
Lock
some services
Sets beep sound On or Off
Beep
when operating VIERA CAST
Displays the information of
Notices
VIERA CAST
Explains the setup items and
Help
operations in VIERA CAST
Advanced
●To move the cursor / select the item
●To access
BACK/
●To return to the previous screen RETURN
●To return to VIERA CAST home screen
●Setup & Help menu
●Using Network Services
(DLNA / VIERA CAST / freesat)
VIERA CAST home screen.
Please read these instructions carefully
and follow the on screen instructions.
You can input characters on VIERA CAST screen by using the USB Keyboard connected to the USB port.
●You cannot use two or more keyboards simultaneously.
●The USB Keyboard which requires the driver is not supported.
●To change the language type “USB Keyboard Layout” (p. 36)
Note
●Be sure to update the software when a software update notice is displayed on the TV screen. If the software is
not updated, you will not be able to use VIERA CAST.
You can update the software later manually “Software Update” in the Network Setup Menu (p. 76)
●VIERA CAST™ home screen is subject to change without notice.
●The services through VIERA CAST™ are operated by their respective service providers, and service may be
discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the
content or the continuity of the services.
●All features of websites or content of the service may not be available.
●Some content may be inappropriate for some viewers.
●Some content may only be available for specific countries and may be presented in specific languages.
●Depending on the connection environment, the internet connection may be slow or may not be successful.
●During the operation, audio signal is output from AV1, AV2, AUDIO OUT and DIGITAL AUDIO OUT terminals.
But no video signals are output. AV1 and AV2 can output audio signal if “AV1 / AV2 out” is set to “Monitor” in the
Setup Menu (p. 34).
●You can set to restrict using VIERA CAST “Child Lock” (p. 54)
●Turn the TV off, and then on again when changing or reconnecting the network connection.
83
Link Functions (Q-Link
VIERA Link)
Q-Link connects the TV and DVD Recorder / VCR, and enables easy recording, playback, etc. (p. 86)
VIERA Link (HDAVI Control™) connects the TV and the equipment with VIERA Link function, and
enables easy control, convenient recording, playback, energy saving, creation of a home theatre, etc.,
without complicated setting. (p. 87 - 91)
You can use Q-Link and VIERA Link functions together.
●This TV supports “HDAVI Control 5” function. But available features are depending on the connected equipment’s
version of HDAVI Control. Please refer to the manual of the equipment to confirm the version.
●VIERA Link features may be available even with other manufacturers’ equipment supporting HDMI CEC.
Summary of Q-Link and VIERA Link features
■Q-Link (SCART connection only)
Features
Connected equipment DVD Recorder / VCR Connection
with Q-Link function
Analogue channel download
DVD Recorder / VCR
with Q-Link function
Easy playback
SCART cable
Power on link
●Use a fully wired SCART cable.
●Connect the DVD Recorder / VCR supporting Q-Link
Power off link
to the TV’s AV1 or AV2 terminal via a SCART cable.
Direct TV Recording
■VIERA Link (HDMI connection only)
Connected equipment
Features
DIGA Recorder with
VIERA Link function
Analogue channel download
Easy playback
Power on link
Power off link
Reduce unnecessary power consumption
in standby
Auto standby for unnecessary equipment
Pause Live TV programme
Direct TV Recording
Control the menu of the connected
equipment by VIERA remote control
Speaker control
–
DVD Player /
Blu-ray Disc Player with
VIERA Link function
–
HD Video Camera /
LUMIX Camera with
VIERA Link function
–
∗3
∗3
–
∗3
∗34
∗
∗3
∗3
–
–
–
–
–
∗1
∗1
–
∗1
–
–
Connection
DIGA Recorder / DVD Player / Blu-ray Disc Player /
HD Video Camera / LUMIX Camera
with VIERA Link function
HDMI cable
●Use a fully wired HDMI compliant cable.
●Connect the equipment supporting VIERA Link to the TV’s HDMI1, HDMI2, HDMI3 or HDMI4 terminal via an
HDMI cable.
●For information about using HDMI cables for connecting Panasonic HD Video Camera or LUMIX Camera, read
the manual of the equipment.
■VIERA Link (HDMI and SCART connections)
Connected equipment DIGA Recorder with Connection
VIERA Link function
84
Features
Analogue channel download
Easy playback
Power on link
Power off link
Reduce unnecessary power consumption
in standby
Auto standby for unnecessary equipment
Pause Live TV programme
Direct TV Recording
Control the menu of the connected
equipment by VIERA remote control
Speaker control
HDMI cable
SCART cable
∗
3
∗3
∗24
∗
∗2
∗1
–
DIGA Recorder
with VIERA Link
function
●Use a fully wired HDMI compliant cable.
●Connect the equipment supporting VIERA Link
to the TV’s HDMI1, HDMI2, HDMI3 or HDMI4
terminal via an HDMI cable.
●Use a fully wired SCART cable.
●Connect the equipment supporting VIERA Link to
the TV’s AV1 or AV2 terminal via a SCART cable.
■VIERA Link (HDMI and Audio out connections)
Connected equipment
Features
Analogue channel download
Easy playback
Power on link
Power off link
Reduce unnecessary power consumption
in standby
Auto standby for unnecessary equipment
Pause Live TV programme
Direct TV Recording
Control the menu of the connected
equipment by VIERA remote control
Speaker control
Player theatre with
VIERA Link function
Blu-ray Disc theatre with
VIERA Link function
Amplifier with
VIERA Link function
–
–
∗5
–
–
–
∗3
–
–
–
–
Connection
●To use Player theatre /
Speaker system
Blu-ray Disc theatre:
Optical digital
audio cable
or
RCA cable
or
SCART cable
∗36
∗
–
–
∗1
∗36
∗
∗3
–
–
∗1
–
●To use Amplifier:
Speaker system
HDMI cable
Player theatre /
Blu-ray Disc theatre
with VIERA Link
function
Amplifier with
VIERA Link
function
Optical digital
audio cable
or
RCA cable
or
SCART cable
HDMI
cable
∗7
HDMI
cable
●Link Functions
(Q-Link / VIERA Link)
HDMI cable
∗5
∗7
SCART cable
DIGA Recorder with
VIERA Link function
●Use a fully wired HDMI compliant cable.
●Connect the equipment supporting VIERA Link to the TV’s HDMI2, HDMI3 or HDMI4 terminal via an HDMI
cable.
●Use a fully wired SCART cable.
●If you use a SCART cable for audio output, connect the equipment supporting VIERA Link to the TV’s AV1 or
Advanced
HD Video Camera /
LUMIX Camera with
VIERA Link function
AV2 terminal and set “AV1 / AV2 out” to “Monitor” in the Setup Menu (p. 34).
●Use any one of the optical digital audio cable, RCA cable and SCART cable for audio output from the TV.
∗1: Available with the equipment which has “HDAVI Control 2 or later” function.
∗2: Available with the equipment which has “HDAVI Control 3 or later” function.
∗3: Available with the equipment which has “HDAVI Control 4 or later” function.
∗4: Available with DIGA Recorder which has HDD.
∗5: while playingback a disc
∗6: except for watching a disc
∗7: If the connected equipment has “HDAVI Control 5” function, you do not have to use this audio cable (Optical
digital audio cable, RCA cable or SCART cable). In this case, connect the equipment to the TV’s HDMI2
terminal via an HDMI cable.
■VIERA Link Control of compatible equipment (VIERA Link Control
p. 90)
●Table below displays maximum number of compatible equipment that can be controlled by VIERA Link Control.
This includes connections to equipment already connected to the TV.
For example, DIGA Recorder connected to Amplifier which is connected to the TV via an HDMI cable.
Type of the equipment
Recorder (DIGA Recorder, etc.)
Player (DVD Player, Blu-ray Disc Player, HD Video Camera, LUMIX Camera,
Digital Camera, Player theatre, Blu-ray Disc theatre, etc.)
Audio system (Player theatre, Blu-ray Disc theatre, Amplifier, etc.)
Tuner (Set top box, etc.)
Maximum number
3
3
1
4
85
Link Functions (Q-Link
VIERA Link)
Q-Link
■Preparations
●Connect the DVD Recorder / VCR with the following logos:
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK”
●Q-Link connection p. 84
●Use fully wired SCART cable.
●Set up the DVD Recorder / VCR. Read the manual of the recorder.
●Q-Link terminal setup in the Setup Menu “Q-Link” (p. 34), “AV1 / AV2 out” (p. 34)
●Download Analogue channel setting “Analogue channel download” (see below)
■Features available
Analogue channel download
Analogue channel settings can be downloaded to a recorder with an analogue tuner (where Analogue
is still broadcast). Digital channel settings are not downloaded.
●To download the Analogue channel settings
“Q-Link Download” (p. 34) or “Auto Setup” in Analogue mode
(p. 41) or “Auto Setup” - when first using the TV (p. 12)
Direct TV Recording - What you see is What you record
Recording the current programme on a DVD Recorder / VCR immediately.
●Available conditions:
Picture source
DIRECT TV REC
EXIT
DIRECT TV REC
Analogue
IDE
GU
DVB
AV
(watching recorder’s tuner)
AV
(watching recorder’s external input)
AV
(watching TV’s external input)
Mode
TV
AV
TV
Recording from
TV monitor out
Recorder’s tuner
TV monitor out
AV
Recorder’s tuner
AV
Recorder’s
external input
AV
TV monitor out
●When Direct TV Recording is performed, the recorder is automatically
turned on if it is in Standby mode.
●Changing channel or turning off the TV is available while the recorder is
recording from its own tuner.
●Changing channel is not available while the recorder is recording from
the TV tuner.
■To stop recording
Unlock the tuner
IDE
GU
Tuner Locked
Press EXIT to unlock and stop recording
Continue
EXIT
Unlock
Power on link and Easy playback
When the DVD Recorder / VCR starts playback or the direct navigator / function menu for the
equipment is activated, the TV is turned on and the input mode is switched automatically so that you
can view the content. (Only when the TV is in Standby mode.)
Power off link
When the TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when
the videocassette or disc is not active.)
●This function will work even if the TV enters Standby mode automatically by auto power standby function.
• “DATA LOGIC” (a trademark of Metz Corporation)
• “Easy Link” (a trademark of Philips Corporation)
Note
• “Megalogic” (a trademark of Grundig Corporation)
• “SMARTLINK” (a trademark of Sony Corporation)
●Some recorders are not compatible. Read the manual of the recorder.
86
VIERA Link “
Control™”∗
∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.
This TV supports “HDAVI Control 5” function.
Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with
HDMI and SCART cables allow you to interface them automatically (p. 84 and p. 85).
These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.
●Some functions are not available depending on the equipment’s version of HDAVI Control. Please confirm the
connected equipment’s version of HDAVI Control.
●VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard
known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added.
As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
●Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.
●For information about applicable Panasonic equipment, consult your local Panasonic dealer
or refer to www.panasonic.co.uk
■Preparations
Recommended Panasonic HDMI cables’ part numbers:
• RP-CDHS15 (1.5 m)
• RP-CDHS30 (3.0 m)
• RP-CDHS50 (5.0 m)
●Use a fully wired SCART cable.
●Set up the connected equipment. Read the manual of the equipment.
●For optimal recording, the settings of the recorder may need to be changed. For details, read the manual
of the recorder.
●Download Analogue channel setting “Analogue channel download” (see below)
●Set VIERA Link On in the Setup Menu “VIERA Link” (p. 34)
●Set up the TV
After connection, turn the equipment on and then switch the TV on.
Select the input mode to HDMI1, HDMI2, HDMI3 or HDMI4 (p. 28), and make sure that an image is
displayed correctly.
This setup should be done each time when the following conditions occur:
• for the first time
• when adding or reconnecting equipment
• when changing setup
●Link Functions
(Q-Link / VIERA Link)
●Connect the equipment that supports VIERA Link.
●VIERA Link connection p. 84 and p. 85
●Use a fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilized.
■Features available
Analogue channel settings can be downloaded to a recorder with an analogue tuner (where Analogue
is still broadcast). Digital channel settings are not downloaded.
●To download the Analogue channel settings
“Q-Link Download” (p. 34) or “Auto Setup” in Analogue mode
(p. 41) or “Auto Setup” - when first using the TV (p. 12)
Advanced
Analogue channel download
Easy playback
Automatic Input switching - When the connected equipment is operated (during playback or menu
operations, etc.), the input mode is switched automatically. When playback is stopped or menus are
exited, the input mode returns to the original setting.
Power on link
When the connected equipment starts playback or the direct navigator / function menu for
the equipment is activated, the TV is automatically turned on and the input mode is switched
automatically so that you can view the content. (Only when the TV is in Standby mode.)
Power off link
When the TV is set to Standby mode, the connected equipment is also automatically set to Standby.
●This function will work even if the TV enters Standby mode automatically by auto power standby function.
87
Link Functions (Q-Link
VIERA Link)
■Features available
Reduce unnecessary power consumption in standby Standby Power Save
Set Standby Power Save “On” in the Setup Menu to use this function
“Standby Power Save” (p. 34)
The power consumption in Standby mode of the connected equipment is controlled in synchronization with the
TV On / Off state.
When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power
consumption in Standby mode of the connected equipment is automatically minimized.
When the TV is turned on and the connected equipment is still in Standby mode, the power consumption of the
connected equipment is increased to reduce the startup time.
●This function is effective if the connected equipment can change the power consumption in Standby mode
and is set to higher consumption.
Auto standby for unnecessary equipment Intelligent Auto Standby
Set Intelligent Auto Standby “On (With reminder)” or “On (No reminder)” in the Setup Menu to
use this function
“Intelligent Auto Standby” (p. 34)
When the TV is On, non-watched or non-used connected equipment goes into Standby mode automatically
to reduce power consumption. For example, when the input mode is switched from HDMI, the connected
equipment will go into Standby mode / when Speaker Selection is changed to “TV”, the Player theatre will go
into Standby mode (except when watching a disc).
●If you select “On (With reminder)”, the on screen message will be displayed before the connected equipment
turns to Standby.
●This function may not work properly depending on the connected equipment. If required, set to “Off”.
■Features available (Using VIERA Link Menu)
Direct TV Recording - What you see is What you record Direct TV Rec
Recording the current programme on a DIGA Recorder immediately.
●If you connect a variety of recorders including other manufacturers’ recorders at the same time, please
connect the DIGA Recorder to the TV’s lower HDMI terminal number. For example, if you use HDMI1 and
HDMI2 for two recorders, connect the DIGA Recorder to HDMI1.
●If Direct TV Recording does not operate, check the settings and the equipment
“Summary of Q-Link and VIERA Link features” (p. 84 and p. 85), “Preparations” (p. 87)
●If you wish to record a programme that the DIGA Recorder does not support, a SCART connection is required
and the programme is recorded by Q-Link function (p. 86).
●Depending on the programme, a SCART connection may be required to record.
●Changing channel or turning off the TV is available while the recorder is recording from its own tuner.
●Changing channel is not available while the recorder is recording from the TV tuner.
DIRECT TV REC
EXIT
1
2
Display “VIERA Link Menu”
Select “Direct TV Rec” and start recording
IDE
GU
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
start
Start
Start
Recorder
Home Cinema
select
●You can also start recording directly
DIRECT TV REC
■To stop recording
Select “Stop” in “Direct TV Rec” and access
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Stop
Recorder
Home Cinema
select
stop
●You can also stop recording directly.
Unlock the tuner
IDE
GU
Tuner Locked
Press EXIT to unlock and stop recording
Continue
88
Unlock
EXIT
■Features available (Using VIERA Link Menu)
Pause Live TV programme Pause Live TV
You can pause the live TV programme and resume the programme later.
The live TV programme will be recorded on HDD of the connected DIGA Recorder.
●This function is available with a DIGA Recorder which has HDD.
●If you connect a variety of recorders including other manufacturers’ recorders at the same time, please
connect the DIGA Recorder which has HDD to the TV’s lower HDMI terminal number. For example, if you use
HDMI1 and HDMI2 for two recorders, connect the DIGA Recorder which has HDD to HDMI1.
●If Pause Live TV does not operate, check the settings and the equipment
“Summary of Q-Link and VIERA Link features” (p. 84 and p. 85), “Preparations” (p. 87)
Access and pause the live TV programme
INPUT
TV
2
Select “Pause Live TV” and pause
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
pause
Start
Start
Recorder
Home Cinema
select
The TV picture will be paused.
●You can also pause directly by using VIERA TOOLS
“How to Use VIERA TOOLS” (p. 30)
●Live TV programme is recorded on HDD from where it was paused.
●If the paused TV picture disappears after a few minutes
OPTION
OPTION
(the paused picture will be restored)
●Link Functions
(Q-Link / VIERA Link)
1
Display “VIERA Link Menu”
●Follow the operation guide to operate Pause Live TV function.
■To operate Pause Live TV
●Operations may be different
search backward
pause
search forward
playback
stop
depending on the recorder. In this
case, follow the operation guide or
read the manual of the recorder.
Advanced
●If you stop playback, the recorded programme
will be deleted from HDD.
■To return to Live TV
(stop playback of Pause Live TV / cancel pause)
Select “Yes”
TV
TV
Pause Live TV
select
Stop Pause Live TV?
Yes
No
stop
●If you stop playback or cancel pause, the recorded programme will be
deleted from HDD.
89
Link Functions (Q-Link
VIERA Link)
■Features available (Using VIERA Link Menu)
Control the menu of the connected equipment by VIERA remote control
VIERA Link Control
You can control some functions of the connected equipment with this TV remote control (point the
remote control at the TV’s signal receiver).
●If you cannot operate the menu of the connected equipment, check the settings and the equipment
“Summary of Q-Link and VIERA Link features” (p. 84 and p. 85), “Preparations” (p. 87)
●For details of the operations for the connected equipment, read the manual of the equipment.
Access and operate the menu of the equipment
1
Display “VIERA Link Menu”
2
Select “VIERA Link Control”
3
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Start
Recorder
Home Cinema
select
Select the equipment you want to access
The type of the connected equipment is displayed.
Select the type of the equipment and access.
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Start
Recorder
Home Cinema
select
access
Recorder / Player / Home Cinema / Video Camera / LUMIX /
Digital Camera / Other
●You can also access directly by using VIERA TOOLS
“How to Use VIERA TOOLS” (p. 30)
■If multiple recorders or
●The displayed item may vary depending on the connected
players are connected
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
equipment.
●“Home Cinema” means Player theatre, Blu-ray Disc theatre or
Recorder theatre.
Start
Start
Recorder2
Home Cinema
●“Other” means Tuner set top box.
Recorder1-3 / Player1-3
■If you access
non-VIERA Link equipment
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
90
Start
Start
Recorder
Home Cinema
The type of the connected
equipment is displayed.
You can access the menu
of the equipment. But you
cannot operate it. Use its own
remote control to operate the
equipment.
The menu of the accessed equipment
(Input mode will be changed automatically)
4
Operate the menu of the equipment
Available VIERA remote control buttons:
(depending on the connected equipment)
Set the position to “TV”
DVD/VCR
TV
EXIT
IDE
GU
The number is given from
the TV’s lower HDMI terminal
number connected to the same
type equipment. For example,
two recorders to HDMI2
and HDMI3, in this case the
recorder connected to HDMI2
is displayed as “Recorder1”,
and the recorder connected
to HDMI3 is displayed as
“Recorder2”.
BACK/
RETURN
OPTION
TEXT STTL
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
Follow the operation guide
●To display the operation guide
OPTION
If other manufacturers’ equipment is
accessed, Setup / Contents Selection
menu may be displayed.
●When the key words are displayed on
colour bar
red green yellow blue
Note
●Some operations may not be available
REC
PROGRAMME
DVD/VCR
TV
depending on the equipment. In this case
use its own remote control to operate the
equipment.
■Features available (Using VIERA Link Menu)
Speaker control Speaker Selection
You can control the home theatre speakers with this TV remote control (point the remote control at
the TV’s signal receiver).
●If you cannot control the home theatre speakers with this remote control, check the settings and the
equipment
“Summary of Q-Link and VIERA Link features” (p. 84 and p. 85), “Preparations” (p. 87)
Access and control the speaker volume
Display “VIERA Link Menu”
1
3
VIERA Link Menu
Pause Live TV
Direct TV Rec
VIERA Link Control
Speaker Selection
Start
Start
Recorder
Home Cinema
select
Set to “Home Cinema” or “TV”
set
■Home Cinema
●Link Functions
(Q-Link / VIERA Link)
2
Select “Speaker Selection”
The Player theatre, Blu-ray Disc theatre or Amplifier will be
automatically turned on if it is in Standby mode and the sound
will be output from theatre speakers connected to the equipment.
●Volume up / down
●Mute
■TV
TV speakers are active.
Advanced
●The sound of the TV speakers is muted.
●When the equipment is turned off, the TV speakers will be activated.
TV
Note
●If you wish to enjoy multi-channel sound (e.g. Dolby Digital 5.1ch) via an
Amplifier, connect the Amplifier to the TV with an HDMI cable and an Optical
digital audio cable (p. 85), and then select “Home Cinema”. If your Amplifier has
“HDAVI Control 5” function, you only need to connect with an HDMI cable. In this
case, connect your Amplifier to the TV’s HDMI2 terminal.
To enjoy the sound from the DIGA Recorder in multi-channel sound, connect an
HDMI cable from the DIGA Recorder to the Amplifier (p. 85).
Note
●These functions may not work properly depending on the connected equipment.
●Image or sound may not be available for the first few seconds when Input mode is switched.
●Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier.
Read the manual of the equipment.
●“HDAVI Control 5” is the newest standard (current as of December, 2009) for HDAVI Control compatible
equipment. This standard is compatible with conventional HDAVI equipment.
“System Information” (p. 36)
●To confirm this TV’s version of HDAVI Control
91
External Equipment
These diagrams show our recommendations for connection of your TV to various pieces of equipment.
For other connections, consult the instructions for each piece of equipment, the table below, and the
specifications (p. 107).
Satellite dish
To enjoy the sound from the external
equipment in multi-channel sound
(e.g. Dolby Digital 5.1ch), connect the
equipment to the amplifier.
For the connections, read the manuals
of the equipment and amplifier.
Satellite cable
HDMI equipment
“HDMI connection” (p. 89)
Fully wired HDMI
compliant cable
DVD Recorder
To listen with speakers
or
Amplifier with
speaker system
PC
Optical digital
audio cable
RCA cable
Conversion adapter
(if necessary)
(Viewing)
Terrestrial
aerial
(Listening)
Fully wired
SCART cable
Computer
(Listening)
To watch DVDs
or
DVD Player
RF
cable
(Viewing)
To record /
playback
DVD Recorder / VCR
■Types of connectable equipment to each terminal
Terminal
AV1
AV2
Recording / Playback
(equipment)
To record / playback videocassettes / DVDs
(VCR / DVD Recorder)
To watch DVDs (DVD Player)
To watch camcorder images (Video camera)
To watch cable broadcasts (Set top box)
To play games (Game equipment)
To use amplifier with speaker system
To use Network services
USB HDD Recording
Q-Link
VIERA Link
92
Direct TV Recording
: Recommended Connection
∗1 : applicable if your amplifier has ARC (Audio Return Channel) function
(with HDMI)
(with HDMI)
(
AV3
Side panel
of the TV
)
USB devices
Rear of the TV
USB cable
Network
Internet
LAN cable (Shielded)
Hub or
Router
To watch
cable broadcasts
Cable
Cable TV box
Camcorder /
HDMI equipment
Fully wired SCART cable
Camcorder /
Game equipment
(Viewing)
HDMI 4
Fully wired HDMI
compliant cable
●External Equipment
Fully wired HDMI
compliant cable
Modem
AV 3
V
(Listening)
Headphones
L
R
(M3 stereo mini plug)
“Headphone Volume” in the
Sound Menu (p. 33)
COMPONENT AUDIO OUT DIGITAL AUDIO OUT
ETHERNET
Advanced
●To adjust volume
USB
1
2
3
4
1
2
∗1
93
Technical Information
Auto Aspect
The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 18)
■Aspect Control Signal
“WIDE” will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART /
HDMI terminal is found.
The aspect will switch to the appropriate 16:9 or 14:9 widescreen ratio.
This function will work in any aspect mode.
Input terminal
RF
Satellite
AV1 (Composite)
AV2 (Composite or S-Video)
AV3
COMPONENT
HDMI1
HDMI2
HDMI3
HDMI4
Input signal format
Widescreen signal
(WSS)
DVB
PAL I
PAL 525/60 6.0 MHz
M.NTSC 6.0 MHz
freesat, Other Sat.
PAL
PAL 525/60
M.NTSC
NTSC
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
1,125 (1,080) / 60p
1,125 (1,080) / 50p
1,125 (1,080) / 24p
Aspect Control Signal
Control signal
through SCART (pin8) / HDMI terminal
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
■Auto mode
Auto mode determines the best aspect ratio to fill the screen. It does this using a four step process (WSS,
Control signal through SCART / HDMI terminal, Letterbox detection, or Justify to fill the screen).
This process may take several minutes, depending on the darkness of the image.
Letterbox detection: If black bands at the top and bottom of the screen are detected, Auto mode chooses the
best ratio and expands the image to fill the screen.
If no aspect signals are detected, Auto mode enhances the image for optimum viewing pleasure.
Note
●The ratio varies depending on the programme, etc. If the ratio is out of the standard 16:9, black bands at the top
and bottom of the screen may appear.
●If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the
tracking of the VCR. Read the manual of the VCR.
SD Card
●If the SD Card does not meet SD standards, it may cause the TV to malfunction.
●Do not remove the card while the TV is accessing data (this can damage card or TV).
●Do not touch the pins on the back of the card.
●Do not subject the card to a high pressure or impact.
●Insert the card in the correct direction (otherwise the card or TV may be damaged).
●Electrical interference, static electricity, or erroneous operation may damage the data or
2.1 mm
32 mm
card.
●Back up the recorded data at regular intervals in case of deteriorated or damaged data
or erratic operation of the TV. (Panasonic is not liable for any deterioration or damage of
recorded data.)
94
24 mm
DivX
ABOUT DIVX VIDEO:
DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video.
Visit www.divx.com for more information and software tools to convert your files into DivX video.
■DivX video file
DivX Certified to play DivX video up to HD 1080p, including premium content.
Extension - “.divx” or “.avi”
Image resolution - Up to 1,920 × 1,080 pixels
Video
• Number of stream: Up to 1
• Codec: DIV3, DIV4, DIVX, DX50, DIV6
• FPS (Frame Per Second): Up to 60 fps
Audio
• Number of stream: Up to 8
• Format: MP3, MPEG, AC3
• Multi channel: AC3 is possible. MPEG multi is 2 ch conversion.
●GMC (Global Motion Compensation) is not supported.
■Subtitle text file of DivX
Subtitles format - MicroDVD, SubRip, TMPlayer
●The DivX video file and subtitles text file are inside the same folder, and the file names are the same except for
the file extensions.
●If there are more than one subtitles text files inside the same folder, they are displayed in the following order of
priority: “.srt”, “.sub”, “.txt”.
●To confirm or change the current subtitle status while playing DivX content, press the OPTION button to
display Option Menu.
●Depending on the methods used to create the file or the state of recording, only parts of the subtitles may be
displayed, or the subtitles may not be displayed at all.
Note
●Depending on how you make SD Card or USB Flash Memory, files and folders may not be displayed in the order
you numbered.
●Depending on the software you use to create DivX files, the files may not play.
●Depending on how you create the files and the structure of folders, the files and folders may not be displayed.
●When there are many files and folders, operation may take time to complete or some files may not be displayed
or playable.
■To show DivX VOD registration code
“DivX® VOD” in the Setup Menu (p. 35)
●If you want to generate the new registration code, you have to deregister the present registration code.
After playing DivX VOD content once, the confirmation screen to deregister will be displayed in “DivX® VOD”
in the Setup Menu. If you press the OK button on the confirmation screen, the deregistration code will be
generated and you will not be able to play any contents that you purchased using the present registration
code.
You will obtain the new registration code by pressing the OK button on the deregistration code screen.
●If you purchase DivX VOD content using a registration code different from this TV’s code, you will not be able
to play this content. (“Your device is not authorized to play this DivX protected video.” is displayed.)
■Regarding DivX content that can only be played a set number of times
FAQs, etc.
Some DivX VOD content can only be played a set number of times.
When you play this content, the remaining number of plays is displayed. You cannot play this content when the
number of remaining plays is zero. (“This DivX rental has expired.” is displayed.)
●When playing this content, the number of remaining plays is reduced by one in the following conditions:
• If you exit the current application.
• If you play the other content.
• If you go to the next or previous content.
●Technical Information
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD section in the Setup Menu. Go to vod.divx.com with this
code to complete the registration process and learn more about DivX VOD.
95
Technical Information
Characters table for numeric buttons
You can enter characters by using numeric buttons for free input items.
Press the numeric button repeatedly until you reach the desired character.
abc
def ●The character is set automatically if you do not press the button for
one second.
ghi
jkl
mno
●
You
can also set the character by pressing the OK button or
pqrs
tuv
wxyz
other numeric buttons within one second.
User input
Name
A
U
a
u
B
V
b
v
C
W
c
w
D
X
d
x
E F G
Y Z
e f g
y z (
H I J K L M N O P Q R S T
0 1 2 3 4 5 6 7 8 9 ! : #
h i j k l m n o p q r s t
) + - . * _
1
.!:#
4
ghi
7
pqrs
2
abc
5
jkl
8
tuv
3
def
6
mno
9
wxyz
0
Characters table:
The number of
times to press
1
2
3
4
5
6
7
8
9
10
11
.
a
1
b
!
c
:
2
#
A
+
B
C
*
_
(
)
d
g
j
m
p
t
w
Space
e
h
k
n
q
u
x
0
f
i
l
o
r
v
y
3
4
5
6
s
8
z
D
G
J
M
7
T
9
E
H
K
N
P
U
W
F
I
L
O
Q
V
X
R
S
Y
Z
Numeric
buttons
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
SCART and HDMI terminal information
■AV1 SCART terminal
■AV2 SCART terminal
(RGB, VIDEO, Q-Link)
(RGB, VIDEO, S-VIDEO, Q-Link)
Suitable inputs for AV1 include RGB (Red / Green / Blue).
AV2 - Pins 15 and 20 are dependent on AV2 S-VHS / VIDEO
switching.
Socket Earth
CVBS out (video)
CVBS earth
Red in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
Socket Earth
CVBS out (video)
CVBS earth
Red in, S.C. - in
Red earth
Green in
Green earth
Blue in
Blue earth
Audio out (L)
Audio out (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
RGB status earth
Status RGB
Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
21
19
17
15
13
11
9
7
5
3
1
20
18
16
14
12
10
8
6
4
2
CVBS in (video)
RGB status earth
Status RGB
Earth
-Q-Link data
Status CVBS
Audio in (L)
Audio earth
Audio in (R)
■HDMI terminal
Hot Plug Detect
19
DDC/CEC Ground 17
SCL
15
CEC
13
TMDS Clock Shield 11
TMDS Data0−
9
TMDS Data0+
7
TMDS Data1 Shield 5
TMDS Data2−
3
TMDS Data2+
1
96
18 +5V Power
16 SDA
14 Reserved
(in cable but N.C. on device)
12 TMDS Clock−
10 TMDS Clock+
8 TMDS Data0 Shield
6 TMDS Data1−
4 TMDS Data1+
2 TMDS Data2 Shield
HDMI connection
HDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interface complying
with a non-compression standard.
HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the
equipment.
HDMI-compatible equipment(∗1) with an HDMI or DVI output terminal, such as a DVD player, a set top box or a
game equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
For information about connections, see “External Equipment” (p. 92).
■Applicable HDMI features
●Input audio signal : 2ch Linear PCM (sampling frequencies - 48 kHz, 44.1 kHz, 32 kHz)
●Input video signal : 480i, 480p, 576i, 576p, 720p, 1080i and 1080p
“Input signal that can be displayed” (p. 98)
Match the output setting of the digital equipment.
●Input PC signal : “Input signal that can be displayed” (p. 98)
Match the output setting of the PC.
●VIERA Link (HDAVI Control 5) : “VIERA Link” (p. 87)
●Deep Colour
●Audio Return Channel(∗3) (HDMI2 terminal only)
■DVI connection
If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable(∗2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1 / 2 / 3:
use COMPONENT-AUDIO terminals / HDMI4: use AV3 audio terminals).
Note
●Audio settings can be made on the “HDMI1 / 2 / 3 / 4 Input” in the Sound Menu. (p. 33)
●If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.
●These HDMI connectors are “type A”.
●These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright
protection.
●Equipment having no digital output terminal may be connected to the input terminal of either “COMPONENT”,
S-VIDEO”, or “VIDEO” to receive analogue signals.
●This TV incorporates HDMI™ technology.
(∗1): The HDMI logo is displayed on HDMI-compliant equipment.
(∗2): Enquire at your local digital equipment retailer shop.
(∗3): Audio Return Channel (ARC) is a function to be able to
send digital sound signals via an HDMI cable.
PC connection
Note
●Some PC models cannot be connected to this TV.
●When using PC, set the colour display quality of PC to the highest position.
●For details of the applicable PC signals
“Input signal that can be displayed” (p. 98)
●Max. display resolution
Aspect
4:3
16:9
1,440 × 1,080 pixels
1,920 × 1,080 pixels
●D-sub 15-pin connector signal
Pin No.
Signal Name
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Pin No.
Signal Name
NC (not connected)
NC (not connected)
HD
VD
NC (not connected)
FAQs, etc.
R
G
B
NC (not connected)
GND (Ground)
Pin No.
●Technical Information
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
●PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency
59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).
●A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.
97
Technical Information
USB connection
●It is recommended to connect the USB HDD or USB Flash Memory directly to the TV’s USB ports.
●Some USB devices or USB HUB may not be used with this TV.
●You cannot connect any devices by using USB card reader.
■The combination of USB devices that have been tested for each TV’s USB port.
Combination of USB port 1 + port 2 (and vice versa):
• USB HDD + USB Flash Memory
• USB HDD + Wireless LAN Adaptor
• USB HDD + USB Keyboard
• USB Flash Memory + Wireless LAN Adaptor
• USB Flash Memory + USB Keyboard
• Wireless LAN Adaptor + USB Keyboard
Note
●Additional information for USB devices may be on the following web site. (English only)
http://panasonic.jp/support/global/cs/tv/
Input signal that can be displayed
COMPONENT (Y, PB, PR), HDMI
∗ Mark: Applicable input signal
Signal name
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
1,125 (1,080) / 60p
1,125 (1,080) / 50p
1,125 (1,080) / 24p
PC (from D-sub 15P)
Signal name
640 × 400 @70 Hz
640 × 480 @60 Hz
640 × 480 @75 Hz
800 × 600 @60 Hz
800 × 600 @75 Hz
800 × 600 @85 Hz
852 × 480 @60 Hz
1,024 × 768 @60 Hz
1,024 × 768 @70 Hz
1,024 × 768 @75 Hz
1,024 × 768 @85 Hz
1,280 × 768 @60 Hz
1,280 × 1,024 @60 Hz
1,366 × 768 @60 Hz
Macintosh13” (640 × 480)
Macintosh16” (832 × 624)
Macintosh21” (1,152 × 870)
PC (from HDMI terminal)
Signal name
640 × 480 @60 Hz
750 (720) / 60p
1,125 (1,080) / 60p
Note
COMPONENT
∗
∗
∗
∗
∗
∗
∗
∗
HDMI
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
Applicable input signal for PC is basically compatible to VESA standard timing.
Horizontal frequency (kHz)
31.47
31.47
37.50
37.88
46.88
53.67
31.44
48.36
56.48
60.02
68.68
47.70
63.98
48.39
35.00
49.73
68.68
Vertical frequency (Hz)
70.07
59.94
75.00
60.32
75.00
85.06
59.89
60.00
70.07
75.03
85.00
60.00
60.02
60.04
66.67
74.55
75.06
Applicable input signal for PC is basically compatible to HDMI standard timing.
Horizontal frequency (kHz)
31.47
45.00
67.50
Vertical frequency (Hz)
60.00
60.00
60.00
●Signals other than above may not be displayed properly.
●The above signals are reformatted for optimal viewing on your display.
●PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficient
clarity.
98
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care
Centre for assistance. For details p. 108
Block noise, frozen or
disappearing image occurs
in digital mode / White spots
or shadow image (ghosting)
occurs in analogue mode /
Some channels cannot be
tuned
freesat Auto Setup cannot
be done completely
●Check connections and dish alignment. The dish
needs to be pointing at Astra 2 at 28.2° East, and
Eurobird 1 at 28.5° East.
●If the problem persists, consult your freesat
registered retailer or call Freesat (UK) Ltd on
08450 990 990 or visit www.freesat.co.uk
●Keep the space between the TV and RF cable.
●Check the position, direction and connection of
the aerial or dish.
●Check “Signal Condition” (p. 43, 46 or p. 48). If
S-Video / black and white picture
●A black and white picture may be seen when the TV is
set to S-Video when the connected equipment is not.
Change the setting on the TV (p. 28).
●Check that the output of the external equipment matches
the input of the TV. If the output of the external equipment is
set to S-Video, the TV must also be set to S-Video (p. 28).
Input mode, i.e. EC/AV1 remains
on the screen
●Press the
button to clear this message.
Press again to redisplay.
Q-Link function does not work
●Confirm SCART cable and connection.
Also set “AV1 / AV2 out” in the Setup Menu (p. 34).
Neither image nor sound is
produced
●Is the TV in AV mode?
●Check the correct AV input mode is selected.
●Check the mains lead is plugged into the
socket outlet.
●Has the TV been turned On?
●Check the Picture Menu (p. 32) and volume.
●Check all required cables and connections are
firmly in place.
●Auto aspect is designed to provide you with the
best ratio to fill the screen. (p. 94)
●Press the ASPECT button if you would like to
change the aspect ratio manually (p. 18).
●Confirm the connection. (p. 84 and p. 85)
●Turn the connected equipment on and then switch the
TV on. (p. 87)
Recording does not start immediately
●Check the settings of the recorder. For details, read the
manual of the recorder.
There may be red spots, blue
spots, green spots and black
spots on the screen
●This is a characteristic of liquid crystal panels and is
not a problem. The liquid crystal panel is built with very
high precision technology giving you fine picture details.
Occasionally, a few non-active pixels may appear on
the screen as a fixed point of red, green, blue or black.
Please note this does not affect the performance of
your LCD.
FAQs, etc.
Auto aspect
“VIERA Link” function does not
work and an error message appears
●Frequently Asked Questions
●Technical Information
“Signal Quality” is displayed in red, the digital
signal is weak.
●Check your postcode area is able to receive
the Freeview channels at www.freeview.co.uk
●Digital signals may be relatively low to
prevent interference with analogue signals
for the period of Digital Switchover. Check
the schedule of Digital Switchover at www.
digitaluk.co.uk
●Weather conditions will affect signal reception
(heavy rain, snow, etc.), in particular in poor
reception areas. Even during good weather,
high pressure can cause poor reception of
some channels.
●Due to the digital reception technologies
involved, quality of the digital signals may be
relatively low in some cases, despite good
reception of analogue channels.
●Turn the TV off with the Mains power On / Off
switch, and then on again.
●If problem persists, consult your local dealer.
99
FAQs
Problem
Chaotic image, noisy
No image can be displayed
Actions
●Set “P-NR” in the Picture Menu (to remove noise). (p. 32)
●Check nearby electrical products
(fluorescent lamp, DECT phones, mobile phones, microwave, etc.).
●Is “Contrast”, “Brightness” or “Colour” in the Picture Menu set to the
minimum? (p. 32)
●Please also refer to “Neither image nor sound is produced” (p. 99).
Screen
Blurry or distorted image
(no sound or low volume)
Unusual image is displayed
●Turn the TV Off with Mains power On / Off switch, then turn it On
again.
●If the problem persists, perform “Shipping Condition” (p. 51).
No sound is produced
●Is “Sound mute” active? (p. 8)
●Is the volume set to the minimum?
●Is Speaker Selection (VIERA Link) set to “TV”?
●Please also refer to “Neither image nor sound is produced” (p. 99).
Sound level is low
or sound is distorted
●Sound signal reception may be deteriorated.
●Set “NICAM” (p. 33) in the Sound Menu to “Off”. (Analogue only)
●Please also refer to “Neither image nor sound is produced” (p. 99).
Sound
Digital Channel
100
●Reset channels. (p. 40 and p. 41)
●Please also refer to “Neither image nor sound is produced” (p. 99).
No programmes shown on TV
Guide
●Reset channels. (p. 40 and p. 41)
●Check the digital transmission by contacting Digital UK on
08456 50 50 50 or at www.digitaluk.co.uk
●Check the analogue broadcast (if still available in your area).
●Consult an aerial or dish engineer to check the alignment of your
aerial or dish.
Cannot find a channel
you have previously watched
●The channel may broadcast for part of the day.
●Check the channel in the TV Guide. (p. 20)
●Channel position numbers may be changed by broadcasters.
●Reset channels. (p. 40 and p. 41)
Problem
Actions
●Set the sound setting of the connected equipment to
Sound is unusual
“2ch L.PCM”.
HDMI
●Check the “HDMI1 / 2 / 3 / 4 Input” setting in the Sound Menu. (p. 33)
●If digital sound connection has a problem, select analogue sound
connection. (p. 97)
Pictures from external
equipment are unusual
when the equipment is
connected via HDMI
●Check the HDMI cable is connected properly. (p. 92)
●Turn the TV and equipment Off, then turn them On again.
●Check an input signal from the equipment. (p. 97)
●Check the output resolution of the equipment.
●Use equipment compliant with EIA/CEA-861/861B.
●Check the LAN cable or Wireless LAN Adaptor is connected
properly. (p. 75)
●Check the connections and settings. (p. 75 - 79)
●Check the network equipment and network environment.
●The router may not be set to issue IP address automatically. If the
network administrator prefers to allocate an IP address, set an IP
address manually. (p. 77)
●The router may be using MAC address filtering (security setting).
Confirm the MAC Address of this TV (p. 76) and set the router to be
able to use it.
●If the problem persists, consult your Internet Service Provider or
telecommunications company.
Cannot select the file during
DLNA operations
●Is media server of the connected equipment prepared? (p. 74)
●Check applicable data format. (p. 74)
Cannot operate VIERA CAST
●Check the connections and settings. (p. 75 - 79)
●The server or connected line might be busy now.
Network
Cannot connect to the network
●Press and hold the standby On / Off switch on the remote control
The TV does not switch On
for about 1 second if Power LED is red.
●Check the mains lead is plugged into the socket.
●The fuse in the mains plug may have blown. Replace it with one of
an identical rating (p. 4).
The remote control does not work
or is intermittent
●Auto power standby function is activated. (p. 9)
●The TV enters Standby mode about 30 mins. after analogue
broadcast ends.
●Are the batteries installed correctly? (p. 8)
●Has the TV been switched On?
●The batteries may be running low. Replace them.
●Point the remote control directly at the front of the TV (within about
7 m and a 30 degree angle of the front of the TV).
Other
●Situate the TV so that sunshine or other sources of bright light do
not shine on the TV’s remote control signal receiver.
Parts of the TV become hot
The LCD panel moves slightly
when it is pushed with a finger
Clattered sound might be heard
An error message appears
pose any problems in terms of performance or quality of the TV.
●There is some flexibility around the panel to prevent damage to the
panel.
●The panel might move slightly when it is pushed with a finger, and
clattered sound might be heard. This is not a malfunction.
●The connected USB device might cause this error. Remove the
device and turn the TV Off with Mains power On / Off switch, then
turn it On again.
●Check if foreign objects are inside the USB port.
●Follow the message’s instructions.
●If the problem persists, contact your local Panasonic dealer or the
FAQs, etc.
Overcurrent error message
appears
●Temperature rises of parts of the front, top and rear panels will not
●Frequently Asked Questions
The TV goes into Standby mode
authorized Service Centre.
101
On screen messages
Message
Meaning / Action
All contents will be lost.
Are you sure to delete this device?
●Once you unregister the USB HDD, all the recorded programme will be
All tuning data will be erased
●“Shipping Condition” will erase all tuning data (p. 51).
●Confirm correct operation.
Are you sure ?
Are you sure you want to delete this timer ?
Press OK to delete timer.
Press RETURN to return.
erased.
●Confirm correct operation.
●The signal is weak. Check the aerial is plugged in properly. It may be
Bad signal
necessary to have an aerial installer check the signal and aerial alignment.
Cannot register another device because
the list is full.
●Reset channels. (p. 40 and p. 41)
●Up to 8 USB HDDs can be registered with this TV.
●The selected channel is locked in Child Lock (p. 54). You must enter the
Child Lock is active!
Press OK to enter PIN.
PIN number before the channel will be displayed.
●The satellite cable might be short-circuited or there might be connection
problems of the cable. Check the cable and connection and then turn the
TV Off with the Mains power On / Off switch, and turn it On again.
●If the message still persists, it may be necessary to have a dish installer
check the dish and cable.
Faulty dish
●It is not possible to record from COMPONENT or HDMI. Connect the
recorder to the TV using a fully wired SCART cable for recording from the
TV tuner.
●Confirm Q-Link or VIERA Link settings (p. 84 - 87).
Feature not available.
Feature not available.
Press OK to view how it works.
∗∗∗
button to view the demonstration to explain how to use it.
Found new software version
.
Press OK to start update (may take
40 mins) or Press EXIT to ignore
and you can update when TV is in standby
●There is a new software available.
Invalid operation - Please check settings
and connections.
●Check the Q-Link or VIERA Link connection and setting (p. 84 - 87).
Invalid system time. Please exit !
●Cannot get the time information and cannot edit Timer Programming
Invalid system time, Timer Programming
will not work.
Please press TV button on remote control
and check time display on Banner
Max. number of timers already set !
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
No channel found.
Please check aerial or local signal availability.
Press OK to start Auto Setup.
No module inserted
No recording - Already recording
No recording - Check media
No recording - Playing
No recording - Unknown reason
No service
No signal
Overcurrent error on USB device occurred.
Please remove the USB device, and switch
off the TV by mains power switch.
102
●The selected feature on VIERA TOOLS is not available. Press the OK
screen. Check the connection of the RF cable.
●Cannot get the time information. If there is no time displayed on the
Information banner, check the connection of the RF cable.
●The maximum number of timer programming events is 15.
●There may be new channels available.
●This message will appear each time a change is made by the
broadcasters. This message can be deactivated by setting “New Channel
Message” to Off in “DVB Tuning Menu”.
Selecting OK will perform “Update Channel List”.
●Follow the on screen instructions.
●Please also refer to p. 99.
●If channels are still not found, consult your local Panasonic dealer.
●Check the CI module is inserted completely (p. 57).
●The equipment may already be recording.
●The tape or disc may be “write protected”, full, missing or damaged.
●The equipment may be playing the tape or disc.
●The recording may not be performed. Check the equipment.
●The broadcaster has stopped the service. Check the channel in the TV
Guide. (p. 20)
●The TV cannot detect the signal. Check the connection of the RF cable.
●The connected USB device might cause overcurrent error. Follow the on
screen instructions.
●Check if foreign objects are inside the USB port.
Message
Meaning / Action
PIN incorrect!
●The PIN number you entered is wrong.
Please check settings and connections
on HDMI devices.
●Communication error in VIERA Link function (p. 87).
Please enter a frequency between
10700 and 12750 MHz.
●The frequency you entered is out of range. Consult the received satelite
Please wait.
●A function is in progress.
●The recorder is recording the programme from its own tuner. You can turn
Recording this channel now
broadcasting company. (p. 48).
the TV off and leave the equipment recording in the normal way.
Reset to Factory Shipping Condition Completed.
Please switch off TV.
●“Auto Setup” will automatically start when Mains power On / Off switch is
Sending Preset Data
●Q-Link or VIERA Link channel download is in progress.
Software successfully updated.
Press EXIT to continue.
●The software updating is finished.
Software update failed. Please try again later.
Press EXIT to continue.
●Perform “System Update Search Now” in System Update (p. 58).
The device is not directly connected to the TV.
The device may not work correctly.
●Please do not connect the device via a USB HUB.
This timer will not follow the TV Guide
information.
Press OK to continue, RETURN to restore
original timer.
●If you edit the start time or end time of Guide link programming by more
next turned On. (p. 12)
If this is still unsuccessful, there may not be any new software available.
than 10 minutes, it will no longer be performed as Guide link programming.
The programming will be performed according to the time setting.
●The starting time in Timer Programming has already passed. Set the
Timer already expired !
timer correctly (p. 53).
Timer Event Due to Start
:
has been
programmed for External
(USB HDD) recording at
∗∗∗ ∗∗∗
●This message will appear 2 mins. before timer programming event for
∗∗ ∗∗
:
Timer incorrect !
Timer overlap.
Press OK to keep, RETURN to edit.
external (USB HDD) recording due to start.
●Set the start and end times in Timer Programming correctly (p. 53).
●Timer programming events are overlapped. Press the OK button to
keep the overlapped setting. “Ext Rec.” and “USB HDD Rec.” are given
priority over “Reminder”. When two or more “Ext Rec.” / “USB HDD
Rec.” overlap, the first timer programming event starts and finishes as
programmed. The next timer programming event can then start.
Tuner Locked
Press EXIT to unlock and stop recording
●If you want to unlock the tuner, cancel Direct TV Recording (p. 86 and p. 88),
Unable to download, please check equipment
●The tape or disc is active. Stop the equipment and try again.
No Device Inserted
●The file is damaged or unreadable.
●The TV does not support the format. (For the applicable formats and data
●Confirm the SD Card or USB device is inserted correctly.
No valid file to play
●The card has no data.
Please confirm the Device is OK
●The inserted SD Card or USB device has a problem.
This operation is not possible
●The selected operation is not available.
Cannot read file
p. 66)
■Network
Cannot read file
●Check the settings. (p. 76 - 79)
●The file is broken or unreadable.
Communication with the server failed.
●This might be a problem of the media server.
An internal error occurred.
Check applicable data format. (p. 74)
Server not found
The software update is not completed.
●Network download failed.
Ethernet cable not connected
Check the connections and settings. (p. 75 - 79)
Check the connections and settings. (p. 75 - 79)
FAQs, etc.
Read the manual of the server software.
●Check the connections and settings. (p. 75 - 79)
●There are no available media server on your home network.
Connection to the server failed.
●On screen messages
■Media Player
the recording of Timer Programming (p. 53) or One Touch Recording.
●Check the connection of the LAN cable. If you use a hub, also check the
light on the hub is lit.
●The LAN cable might be defective.
103
Maintenance
First, remove the mains plug from the socket outlet.
Display panel, Cabinet, Pedestal
Regular care:
Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints.
For stubborn dirt:
Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then wring
the cloth and wipe the surface. Finally, wipe away all the moisture.
Caution
●Do not use a hard cloth or rub the surface too hard. This may cause scratches on the surface.
●Take care not to subject the TV’s surfaces to water or detergent more than requires. A liquid inside the TV could
lead to product failure.
●Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may
degrade surface quality or cause peeling of the paint.
●The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch
the surface with your fingernail or other hard objects.
●Do not allow the cabinet or pedestal to make contact with a rubber or PVC substance for a long time. This may
degrade surface quality.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.
Glossary
■AAC
■MP3
■AVCHD
■NICAM
Advanced Audio Coding - An advanced audio
compression method
Advanced Video Codec High Definition - A standard
for high definition video cameras that can be used to
record and play high resolution HD images
■DLNA
Digital Living Network Alliance
■DVB
Digital Video Broadcasting
■DVD
Digital Versatile Disc
■DVI
Digital Visual Interface - A high quality video interface
standard to connect to the display
■EPG
Electronic Programme Guide - A digital guide showing
scheduled programmes
■HDMI
High-Definition Multimedia Interface - A digital audio
and video interface for transmitting uncompressed
digital signals on a single cable
■JPEG
Joint Photographic Experts Group - A standard for
compressing colour still pictures
■LAN
Local Area Network
■MAC Address
Media Access control Address
■MPEG2
Moving Picture Experts Group phase 2 - A standard
for efficiently compressing and expanding colour
videos
104
MPEG Audio Layer 3 - A method for compressing
audio data
Near Instantaneous Companded Audio Multiplex A format for digital sound over television
■NTSC
National Television System Committee - One of the
television signals used in USA, etc.
■RF
Radio Frequency - Signal received from terrestrial
aerial
■RGB / S-Video / Video
Choose between these three video formats
depending on personal preference and equipment
requirement
(RGB - Red, Green and Blue)
■SCART
21 pin connection used for video, audio and switching
signals (Also known as Euro SCART and Peritel)
■Shop viewing environment
Shop viewing environment is the demonstration
mode to explain main features of this TV in an easy
understandable way. This mode will work if you select
“Shop” in “Auto Setup” (p. 15).
■SPDIF
A standard audio transfer file format
■USB
Universal Serial Bus - An interface specification to
connect devices
■VCR
Video Cassette Recorder
Licence
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected.
●“freesat” is a registered trademark and the “freesat” logo is a trademark of Freesat (UK) Ltd.
●DVB and the DVB logos are trademarks of the DVB Project.
●VGA is a trademark of International Business Machines Corporation.
●Macintosh is a registered trademark of Apple Inc., USA.
●S-VGA is a registered trademark of the Video Electronics Standard Association.
●SDXC Logo is a trademark of SD-3C, LLC.
●HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
●HDAVI Control™ is a trademark of Panasonic Corporation.
●“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.
●Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
●GUIDE Plus+ is (1) a registered trademark or trademark of, (2) manufactured under license from and (3) subject
of various international patents and patent applications owned by, or licensed to, Gemstar-TV Guide International,
Inc. and/or its related affiliates.
●VIERA CAST™ is a trademark of Panasonic Corporation.
●DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the
Digital Living Network Alliance.
●Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
●DivX® is a registered trademark of DivX, Inc., and is used under license.
●YouTube and Picasa are trademarks of Google, Inc.
●Skype™ is a trademark of Skype Limited.
●Licence
●Maintenance ●Glossary
The recording and playback of content on this or any other device may require permission from the owner of the copyright or
other such rights in that content. Panasonic has no authority to and does not grant you that permission and explicitly disclaims
any right, ability or intention to obtain such permission on your behalf. It is your responsibility to ensure that your use of this
or any other device complies with applicable copyright legislation in your country. Please refer to that legislation for more
information on the relevant laws and regulations involved or contact the owner of the rights in the content you wish to record
or playback.
GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/OR ITS RELATED AFFILIATES ARE NOT IN ANY WAY LIABLE FOR
THE ACCURACY OF THE PROGRAM SCHEDULE INFORMATION PROVIDED BY THE GUIDE PLUS+ SYSTEM. IN NO
EVENT SHALL GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/OR ITS RELATED AFFILIATES BE LIABLE FOR ANY
AMOUNTS REPRESENTING LOSS OF PROFITS, LOSS OF BUSINESS, OR INDIRECT, SPECIAL, OR CONSEQUENTIAL
DAMAGES IN CONNECTION WITH THE PROVISION OR USE OF ANY INFORMATION, EQUIPMENT, OR SERVICES
RELATING TO THE GUIDE PLUS+ SYSTEM.
http://www.europe.guideplus.com/
FAQs, etc.
This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to
(i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a
consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide
AVC Video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
105
Index
A Accessories ······································································· 6
B
C
D
E
F
G
H
I
L
M
106
Advanced Picture Settings ·············································· 60
Analogue Tuning Menu ············································· 41, 46
Aspect ······································································· 18, 94
Astra 1 ············································································· 49
Astra 2 ································································· 10, 49, 99
Audio Description ······················································ 19, 33
Auto Setup··························································· 12, 40, 41
Auto Standby ··································································· 36
AV1 / AV2 out····························································· 34, 86
Banner Display Timeout ·················································· 35
Cable TV box ······················································· 11, 36, 92
Category list ···································································· 21
C.A.T.S. ··········································································· 32
Channel Genre ································································ 20
Channel List ·················································· 43, 45, 47, 50
Channel Sorting by Region ············································· 44
Child Lock········································································ 54
Clamper ··········································································· 10
Common Interface ··························································· 57
COMPONENT ··························································· 93, 98
Connection ···························· 10, 11, 62, 66, 75, 84, 85, 92
Direct TV Recording ·················································· 86, 88
Dish alignment··························································· 10, 99
DivX ················································································· 95
DLNA ··············································································· 74
D-sub 15-pin ···································································· 97
DVB Tuning Menu ····················································· 41, 44
DVI ·················································································· 97
DVI Input Setting ····························································· 36
DVD Recorder ··············································· 11, 29, 92, 93
EPG ··········································································· 20, 21
Eurobird 1 ·································································· 10, 99
External equipment ······································· 11, 28, 92, 93
External input ···························································· 28, 29
FAQs ········································································ 99-101
Favourites Edit ···················································· 43, 45, 50
Free input menu ························································ 31, 97
freesat Tuning Menu·················································· 40, 42
Glossary ········································································ 104
Guide link programming ·················································· 23
GUIDE Plus+ Settings ····················································· 36
HDMI ································································· 96, 97, 107
HDMI Content Detection ················································· 34
Hold ··········································································· 17, 26
Home Cinema ································································· 91
Hotbird ············································································· 49
Information banner ·························································· 17
Input Labels ····································································· 55
Input signal ······································································ 98
Intelligent Frame Creation ··············································· 36
Last view ········································································· 19
Licence ·········································································· 105
Mains Lead ······································································ 10
Mains power On / Off switch ······································· 9, 12
Maintenance ·································································· 104
Manual Tuning ····················································· 44, 47, 48
Media Player ······························································ 66-73
Menu Functions ·························································· 31-39
Mode ··············································································· 33
Monaural Audio ······························································· 19
Multi Audio ······································································· 19
Music Mode ····································································· 73
N Network connections ······················································· 75
O
P
Q
R
S
T
U
V
W
Z
Network Setup ································································· 76
New Channel Message ··················································· 46
NICAM ············································································· 33
NTSC······································································· 32, 107
Off Timer ···································································· 19, 34
One Touch Recording ······················································ 65
Other Sat. Tuning Menu ·················································· 48
Optional accessories ························································· 6
Owner ID ··································································· 14, 56
PAL ················································································ 107
PC ············································································· 59, 97
Pedestal ············································································ 7
Photo mode ····································································· 68
PIN number ························································· 14, 54, 56
Playing Time Display ······················································· 35
P-NR················································································ 32
Power and Timer LED ····································· 9, 22, 52, 65
Q-Link ·································································· 34, 84, 86
Q-Link Download ······················································· 12, 34
Quick Start Guide ························································· 6-15
Radio Mode ····································································· 35
Remote control ······························································ 6, 8
Reset to Defaults ······················································· 32, 33
Reversal Film Effect ························································ 32
Rewind LIVE TV ······························································ 65
RGB··············································································· 107
Safely remove USB ············································· 19, 63, 67
Sales and Support Information ······································ 108
SCART ···································································· 96, 107
SD Card····································································· 66, 94
Search list········································································ 20
Shipping Condition ·························································· 51
Signal Condition ·················································· 43, 46, 48
Slideshow ·································································· 68, 81
Specifications ································································ 107
Split Programme······························································ 23
Subtitles····································································· 18, 27
S-Video ···································································· 96, 107
System Update ································································ 58
Teletext ······································································· 25-27
Timer Programming ··················································· 22, 52
True Cinema ···································································· 32
TV Guide ···································································· 20-24
Update Channel List ························································ 46
USB Flash Memory ························································· 66
USB HDD ········································································ 62
USB Keyboard································································· 83
V-Audio ProSurround ······················································ 33
VCR ······························································· 11, 29, 92, 93
Video mode ····································································· 70
VIERA CAST ··································································· 83
VIERA Link ····················································· 84, 85, 87-91
VIERA TOOLS ································································· 30
Viewing Mode ·································································· 32
Vivid Colour ····································································· 32
Volume Correction ····················································· 19, 33
Wireless LAN Adaptor ··········································· 6, 13, 75
WSS ················································································ 94
Zoom ··············································································· 18
Specifications
TX-L42D25B
152 W
Display
panel
TX-L32D25B
TX-L37D25B
AC 220-240 V, 50 / 60 Hz
136 W
147 W
0.30 W
Standby Power Consumption
36.00 W (With monitor out recording)
Aspect Ratio
16:9
80 cm (diagonal)
94 cm (diagonal)
Visible screen size
698 mm (W) × 393 mm (H)
819 mm (W) × 461 mm (H)
Number of pixels
2,073,600 (1,920 (W) × 1,080 (H))
Speaker
140 mm × 35 mm × 2 pcs, 8 Ω
Audio Output
20 W (10 W + 10 W), 10% THD
Headphones
M3 (3.5 mm) stereo mini Jack × 1
VGA, SVGA, WVGA, XGA
SXGA, WXGA ······ (compressed)
PC signals
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
Power Source
Rated Power Consumption
107 cm (diagonal)
930 mm (W) × 523 mm (H)
Sound
DVB-S / S2
freesat
Other Sat.
: freesat services via Satellite dish input.
Receiver frequency range - 950 MHz to 2,150 MHz
LNB Power and Polarisation - Vertical: +13 V
Horizontal: +18 V
Current: Max. 500 mA (overload protection)
22 kHz Tone - Frequency: 22 kHz ± 2 kHz
Amplitude: 0.6 V ± 0.2 V
Symbol Rate - Max. 30 MS/s
FEC Mode
- 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Demodulation - QPSK, 8PSK
Not available for DiSEqC control.
DVB-T / T2
: Digital terrestrial services via UHF aerial input.
PAL I
: UHF E21-68
PAL 525/60
: Playback of NTSC tape from some PAL Video recorders (VCR) or
NTSC disc playback from DVD player and recorder.
M.NTSC
: Playback from M.NTSC Video recorders (VCR).
NTSC (AV input only): Playback from NTSC Video recorders (VCR).
(
Receiving Systems /
Band name
Satellite dish input
Aerial input
Operating Conditions
Connection Terminals
AV1 (SCART terminal)
AV2 (SCART terminal)
VIDEO
AV3
AUDIO L - R
COMPONENT
VIDEO
AUDIO L - R
Others
PC
Card slot
Dimensions
(W × H × D)
Mass
ETHERNET
USB 1 / 2
AUDIO L - R
DIGITAL
PCM / Dolby Digital, Fiber optic
AUDIO OUT
With Pedestal 795 mm × 564 mm × 217 mm 917 mm × 632 mm × 287 mm
795 mm × 521 mm × 77 mm 917 mm × 590 mm × 77 mm
(With speaker part)
(With speaker part)
TV only
795 mm × 521 mm × 45 mm 917 mm × 590 mm × 45 mm
(Without speaker part)
(Without speaker part)
14.0 k Net (With Pedestal)
17.5 k Net (With Pedestal)
12.0 k Net (TV only)
14.5 k Net (TV only)
1,032 mm × 697 mm × 329 mm
1,032 mm × 655 mm × 77 mm
(With speaker part)
1,032 mm × 655 mm × 39 mm
(Without speaker part)
21.5 k Net (With Pedestal)
18.5 k Net (TV only)
●Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.
●This equipment complies with the EMC standards listed below.
EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024
FAQs, etc.
Output
Female F-type 75 Ω
UHF
Temperature : 0 °C - 35 °C
Humidity
: 20 % - 80 % RH (non-condensing)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link)
21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)
RCA PIN Type × 1
1.0 V[p-p] (75 Ω)
RCA PIN Type × 2
0.5 V[rms]
Y
1.0 V[p-p] (including synchronization)
±0.35 V[p-p]
PB, PR
RCA PIN Type × 2
0.5 V[rms]
TYPE A Connectors
HDMI1 / 3 / 4 : HDMI (Version 1.4 with Content Type)
and HDMI (Version 1.3a with Deep Colour)
HDMI2
: HDMI (Version 1.4 with Content Type, Audio Return Channel)
and HDMI (Version 1.3a with Deep Colour)
●This TV supports “HDAVI Control 5” function.
HIGH-DENSITY D-SUB 15PIN R,G,B/0.7 V[p-p] (75 Ω)
HD, VD/TTL Level 2.0 - 5.0 V[p-p] (high impedance)
SD Card slot × 1
Common Interface slot × 1
RJ45, IEEE802.3 10BASE-T / 100BASE-TX
USB2.0 DC 5 V, Max 500 mA
●For available USB devices p. 98
RCA PIN Type × 2
0.5 V[rms] (high impedance)
●Specifications
●Index
HDMI
1/2/3/4
)
107
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products
and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products
and used batteries, please take them to applicable collection points, in accordance with your national legislation and the
Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential
negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local municipality, your
waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or
dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the
Directive for the chemical involved.
Sales and Support Information
Customer Care Centre
• For customers within the UK: 0844 844 3852
• For customers within the Republic of Ireland: 01 289 8333
• Visit our website for product information: www.panasonic.co.uk
• E-mail: customer.care@panasonic.co.uk
Direct Sales at Panasonic UK
• For customers: 0844 844 3856
• Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre
Monday ─ Thursday 9:00am ─ 5:30pm, Friday 9:30am ─ 5:30pm (Excluding public holidays).
• Or go on line through our Internet Accessory ordering application at www.pas-europe.com.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website
for further details.
Declaration of Conformity (DoC)
If you want to get a copy of the original DoC of this TV, please visit the following website:
http://www.doc.panasonic.de
Authorized Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of
your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Panasonic (U. K.) Ltd.
Serial Number
M0310-0
Willoughby Road, Bracknell, Berks RG12 8FP
Web Site : http://panasonic.net
© Panasonic Corporation 2010
Printed in Czech Republic
Download PDF

advertising