All Specifications are subject to
change without notice.
Current input:
26 mA
Composition:
100% Silicone Rubber
PVC Cable
100% Latex free
System requirements:
PS/2 compatible (adaptor not
included)
USB interface
Guaranteed period:
Limited lifetime warranty
You can email us at: [email protected]
or call us at: (301) 341-4900
In Europe, contact +31-23-5450185
www.man-machine.com
USB: Attach the keyboard cable to a USB computer port. (You do not have to
turn off your computer. There is no software to install.)
PS2: Turn off your computer before attaching devices. If you have another
keyboard attached, disconnect it. Attach the PS2 keyboard Adapter (sold
separately) to USB cable connector. Attach cable to the keyboard port.
Turn on your computer to activate the keyboard. (There is no software to
install.)
Installing Your Mighty Mouse
Weight:
142 g (0.3lb)
Dimensions:
106 x 61 x 32 mm
4.2 x 2.4 x 1.3 inch
Cable length:
1.83 m (6.0’)
Storage temperature:
-20 °C up to 70 °C
(-4 °F up to 158 °F)
Operating temperature:
0 °C up to 70 °C
(32 °F up to 158 °F)
Voltage:
5 Volt
This optical mouse is water-resistant (IP68 compliant) and great for
medical, industrial, marine applications or any environment where dust,
moisture or liquid is a concern. The Mighty Mouse has a 6’ cable and is
PS/2 and USB compatible. This two-button mouse is available in black or
cool-gray, and can be sanitized and disinfected.
Mighty Mouse
Chlorine based (max 10% solution) – Chlorox, Novalsan, etc.
Formaldehyde based - Formaldehyde Solution 37%, Vinco
Formaldegen, etc.
Glutaraldehyde based – Aldacide 200, Lysofume, Wavicide, etc.
Phenol based – Lysol I.C., Beaucoup, Magna Clean, Tek-Trol, etc.
Alcohol based – Cavicide, Isopropyl Alcohol, Medicide, etc.
Oxidizing – Hydrogen Peroxide 3% Solution, Lifegard Series, etc.
Quaternary Ammonium – Roccal-D, Bacto-Sep, Parvosol, etc.
Soap and water
Acetone
Over 10% bleach solutions
Temperature or pressure sterilization
Buffing pads or scrubbing pads
•
•
•
•
Copyright Man & Machine, Inc. 2007
THESE INSTRUCTIONS AND RECOMMENDATIONS HAVE BEEN PREPARED
TO ADVISE THE PROPER METHODS FOR CLEANING YOUR PRODUCT.
MAN & MACHINE, INC. OR THE LOCAL DISTRIBUTOR CANNOT ASSUME ANY
RESPONSIBILITY FOR THE APPLICATION OF THEM. IF THERE ARE ANY
QUESTIONS, PLEASE CONTACT PLACE OF PURCHASE OR MMI PRIOR TO
CLEANING.
Petroleum based cleaning fluids, such as Gasoline
•
DO NOT USE:
•
•
•
•
•
•
•
•
Disinfectants recommended by Man & Machine, Inc.:
1. Clean the surface of the product by wiping, brushing, spraying or
dipping it. Use only rags, sponges or soft bristle brushes.
DO NOT place the USB or PS/2 connector into the fluid.
2. Either wipe with dry cloth or allow to air dry.
Cleaning Instructions for Waterproof Keyboards and Mice:
">
