JBL On Tour XTB - White

JBL On Tour XTB - White
jbl On TOUR XTB
™
Bluetooth portable loudspeaker
®
User Guide
English............................... 2
Deutsch........................... 11
Français........................... 20
Español............................ 29
Italiano............................. 38
Nederlands .................... 47
한 글................................ 56
Dansk............................... 65
Japanese......................... 74
中文 ............................... 83
Русский......................... 92
Svenska......................... 101
Suomi............................. 110
0050CSK - JBL On Tour XTB v11.indd 1
08/09/08 13:00:53
Important Safety Instructions
Please read the following precautions before use:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizing plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong. The wide blade, or third prong, is provided for safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at the plugs and convenience receptacles and the point where they exit
from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT.
PLEASE REFER SERVICING TO QUALIFIED HARMAN CONSUMER GROUP, INC., SERVICE PERSONNEL.
Never remove grille covers in order to service the speaker system. The speaker system does not contain any user-serviceable parts. Refer all servicing
to the Harman Consumer Group, Inc., Technical Support Group.
FCC/IC Statement and Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause interference.
2) This device must accept interference, including interference that may cause undesired operation of the device.
MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT UNDER FCC RULES.
CAUTION
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING
FLASH AND
ARROWHEAD
WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU
TO DANGEROUS
VOLTAGE INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE RISK
OF SHOCK, DO NOT REMOVE
COVER. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN
THE TRIANGLE IS
A WARNING SIGN
ALERTING YOU
TO IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
SEE MARKING ON BOTTOM OF PRODUCT
2
WARNING: THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR
SPLASHING, AND NO OBJECTS FILLED WITH LIQUID, SUCH AS VASES, DRINKING
GLASSES AND SO FORTH, SHOULD BE PLACED ON THE APPARATUS.
WARNING: THE APPARATUS MAY BE STATIC-SENSITIVE IN SOME
CIRCUMSTANCES AND MAY HAVE TO BE RESET AFTER SUFFERING AN
ELECTROSTATIC DISCHARGE.
IMPORTANT NOTE FOR ALL
ELECTRONIC PRODUCTS:
BEFORE INSERTING OR UNPLUGGING AUDIO
CABLES FROM THE SOURCE DEVICE’S HEADPHONES OR LINE-LEVEL OUTPUT JACKS, IT IS
GOOD PRACTICE TO TURN OFF THE DEVICE.
THIS WILL PROLONG THE LIFE OF YOUR UNIT,
HELP PROTECT YOUR DEVICE FROM STATIC
ELECTRICITY AND AVOID POTENTIAL DAMAGE.
jbl On TOUR XTB USER GUIDE
0050CSK - JBL On Tour XTB v11.indd 2
08/09/08 13:00:53
English
jbl On Tour XTB
™
Introduction
The JBL On Tour™ XTB portable loudspeaker is the latest innovation from JBL, Inc., a longtime leader in the manufacturing of high-end component
audio systems. JBL, Inc., audio heritage and continual research have resulted in the unique technologies found in this product.
With no wires to tangle or restrict your movement, and volume and tracking controls conveniently located on the remote control, the JBL On Tour XTB
loudspeaker is both the ultimate in portable audio convenience and a paragon of superior audio quality.
A compact, high-performance Bluetooth® sound center, the JBL On Tour XTB loudspeaker is controllable by remote control from up to 5.5 meters
away. Connected to your Bluetooth A2DP-enabled audio device, Bluetooth music phone, iPod, MP3 player or any other music source with an audio
jack, the JBL On Tour XTB loudspeaker will provide clean, powerful sound in a compact, portable design. Accept a phone call with the included
Bluetooth speakerphone feature. Take complete control of your traveling experience with the JBL On Tour XTB portable loudspeaker.
Compatibility
The JBL On Tour XTB system is compatible with most Bluetooth-enabled devices, music players, cell phones and laptops. Enabled with Bluetooth
A2DP (Advanced Audio Distribution Profile), AVRCP (Audio/Video Remote Control Profile) and HFP (Hands-Free Profile), the system can stream
high-quality sound and serve as a speakerphone. With the additional stereo mini jack connection, you can enjoy high-quality audio from a variety
of devices such as the iPod shuffle, MP3 and CD players, desktop computers (all platforms), laptops and satellite radio.
REMOTE
Volume controls – Just a touch increases, decreases or mutes the volume.
Music controls – Manage the playlists on your Bluetooth A2DP-enabled device with the Play, Pause, Next Track, Previous Track, Rewind and
Fast Forward controls.
Phone call controls – Answer or end a phone call with the simple touch of a button.
Compact Design
The JBL On Tour XTB portable loudspeaker is a complete 2.1-channel audio system in one easy-to-place footprint. The JBL On Tour XTB loudspeaker delivers sound with a powerfully tuned digital audio path. Its clean and compact digital amplification, coupled with DSP (digital signal
processing) equalization, efficiently provides radial transducers with cool-running power.
Advanced Technology
The JBL On Tour XTB system combines many proprietary technologies to provide the highest-quality sound. It provides astonishing bass and clear,
accurate sound from any direction. The four Odyssey® full-range transducers are driven by powerful neodymium magnets, and Odyssey tweeters
provide accurate high frequencies.
COE (Computer-Optimized Equalization)
The JBL On Tour XTB system equalization is computer-optimized to provide a rich, complete soundstage.
OCT (Optimized Compression Topology)
The JBL On Tour XTB loudspeaker utilizes a proprietary compression technology to ensure clean, accurate sound at high output levels.
www.jbl.com
0050CSK - JBL On Tour XTB v11.indd 3
3
08/09/08 13:00:53
Unpacking
Carefully unpack your speaker system and identify all its components:
JBL On Tour™ XTB unit
Power supply
Auxiliary audio cable
Remote control
Carry case
General Setup
Unpack the JBL On Tour XTB system and its power supply.
1. Plug the adapter into the “12V DC-in” port on the back of the unit and then into a wall outlet.
2. Turn on the power switch. The green indicator light will turn on.
3. Remove the remote control battery protector before operating the remote control.
1.
2.
Power switch
Volume Control (on Base Unit)
Volume increase “ ”
Volume decrease “ ”
Answer/end phone call (MFB) “ ”
4
jbl On TOUR XTB USER GUIDE
0050CSK - JBL On Tour XTB v11.indd 4
08/09/08 13:00:57
English
Battery Installation
1. Turn the battery compartment cover on the bottom of the JBL On Tour™ XTB speaker to the unlocked position; remove the battery
compartment cover.
2. Place (4) fresh AA batteries as shown.
3. Replace the battery compartment cover.
Note: System will not use battery power when using AC power.
1.
2.
3.
DO NOT MIX BATTERY TYPES.
DO NOT MIX CHARGED AND PARTIALLY CHARGED BATTERIES.
BATTERIES WILL NOT RECHARGE WHILE IN THE UNIT.
Battery Disposal
Alkaline batteries are considered nonhazardous and can be disposed of with your regular household trash.
Rechargeable batteries (i.e., nickel cadmium, nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials
and may pose an unnecessary health and safety risk. Unwanted materials should be disposed of in an environmentally sound manner.
Contact your local waste management officials for other information regarding the environmentally sound collection, recycling and
disposal of used batteries.
www.jbl.com
0050CSK - JBL On Tour XTB v11.indd 5
5
08/09/08 13:01:01
Bluetooth Pairing
Before you can use your JBL On Tour™ XTB system with a Bluetooth-enabled product, you must pair it with that product. To pair:
1. Make sure your JBL On Tour XTB system is turned on. The JBL On Tour XTB unit automatically goes into Pairing/Discoverable mode,
represented by a constant blue indicator light.
2. Put your Bluetooth-enabled device in Pairing mode so the devices can “see” each other. (Refer to the Bluetooth-enabled device’s
user’s guide for directions and details about putting it into Pairing mode.) The JBL On Tour XTB unit will be represented as
“OnTourXTB” on your Bluetooth-enabled device. The JBL On Tour XTB password is 8888.
3. The
JBL On Tour XTB system is successfully paired and ready to use when the blue indicator light flashes.
Note: Bluetooth pairing between two devices does not have to be repeated after a successful initial pairing, unless the JBL On Tour XTB
system has been removed from the Bluetooth-enabled device’s Bluetooth device list.
1.
Listening to Music From a
Bluetooth-Enabled Device
1. Make sure the JBL On Tour XTB system is paired (see Bluetooth Pairing section).
2.Go to the Bluetooth-enabled device’s music player and play music. Refer to the Bluetooth-enabled device’s user’s guide for
directions and details about using its music player and transmitting music via Bluetooth technology.
3. Use either the Bluetooth-enabled device or the JBL On Tour XTB remote control to navigate the music player.
6
jbl On TOUR XTB USER GUIDE
0050CSK - JBL On Tour XTB v11.indd 6
08/09/08 13:01:02
English
Listening to a Phone Call From a
Bluetooth-Enabled Device
1. Make sure the JBL On Tour™ XTB speaker is paired (see Bluetooth Pairing section).
2.When you hear your Bluetooth-enabled device’s ringtone from the JBL On Tour XTB system, press the MFB “ ” button to answer
the phone call.
3.When the phone call is finished, press the MFB “ ” button to end the phone call. An incoming phone call can be rejected by pressing
and holding the MFB “ ” button on the JBL On Tour XTB unit for two seconds. To answer a second incoming phone call, press the
MFB “ ” button. To reject a second incoming phone call, press and hold the MFB “ ” button for three seconds. To mute a phone call,
press both Volume buttons on the JBL On Tour XTB system or press the Mute “ ” button on the remote control. To unmute the phone call,
press either the Volume button on the JBL On Tour XTB system or press the Mute “ ” button
on the remote control.
2.
3.
,/
www.jbl.com
0050CSK - JBL On Tour XTB v11.indd 7
7
08/09/08 13:01:04
Listening to Music From an Auxiliary Device
The JBL On Tour™ XTB system includes a 3.5mm mini jack cable for connection to any analog music player with
either a 3.5mm or headphone output.
1. Connect the auxiliary device to the JBL On Tour XTB system using the supplied audio cable.
2. Press the Power button on the rear of the JBL On Tour XTB system. A green LED will indicate that the unit
is on.
3. Control music playback through the auxiliary device.
4. Adjust the volume using the “ ” and “ ” buttons located on the front of the JBL On Tour XTB loudspeaker.
1.
Remote Functionality
Volume Decrease
Play/Pause
Previous Track/
Previous Track
Rewind
Volume Increase
Mute
Next Track/
Next Track
Fast Forward
Answer Phone Call/
Hang Up
Charging
The JBL On Tour XTB system features a USB charge port for charging most mobile phones and most portable music players.
Charge cables are not included, so if a USB charge cable was not provided with your mobile phone or portable music player, find out
whether one is available from the manufacturer or an authorized dealer. (Mobile phones and portable music players that require data
communication in order to charge will not charge from the JBL On Tour XTB system.)
8
jbl On TOUR XTB USER GUIDE
0050CSK - JBL On Tour XTB v11.indd 8
08/09/08 13:01:05
JBL On TOUR™ XTB
Manufacturer
JBL, Inc.
Model
JBL On Tour™ XTB
Drivers (Tweeter)
25mm (1")
troubleshooting
SOUND QUALITY
Symptom
Possible Problem
Solution
Note
There is no sound from your
JBL On Tour XTB speaker.
There is no power to the unit.
Make sure the wall power outlet or power strip has
power; make sure all switches for the outlet/power
strip are on and that all switches for the speaker
system are on.
Is the LED on? If the LED is not on,
power is not getting to your JBL On
Tour XTB system.
The source selection is incorrect.
Ensure that the auxiliary cable is properly connected
to an external audio device.
Power2 x 4 Watts (tweeters)
and 1 x 6 watts (woofer)
at 1% THD
Diameter
165mm (6-1/2")
Height
41mm (1-5/8")
Weight
0.6kg (1.3 lb)
Battery Size AA
Battery Type
Alkaline, NiMH
Input Impedance
>10k Ohms
Signal-to-Noise Ratio >85dB
Frequency Response 100Hz – 20kHz
Power (USA/Canada)
120 Volts, 60Hz AC
Power (Europe/UK)220 – 230 Volts, 50Hz
or 60Hz AC
Power (Japan)
100 Volts, 50Hz or 60Hz AC
Power (Australia)
240 Volts, 50Hz or 60Hz AC
Maximum Power Consumption
25 Watts
UL/CUL/CE-Approved
English
Technical
SPECIFICATIONS
Try the solutions shown.
Turn up the volume.
Check the system with a known good source.
Connect the Aux In cable to the headphone jack on
your audio device.
The source device is not capable of
sending music via Bluetooth technology.
Replace the source device with a Bluetooth wireless
technology enabled source device.
Sound comes from only one side/
channel.
The audio cable is not seated properly.
Make sure the Aux In cable is seated all the way into
the JBL On Tour XTB system.
There is distortion (static, crackling or hissing sounds).
The noise may be caused by interference from a monitor, cell phone or other
transmitting device.
Turn the monitor or other device off to see whether the
noise is eliminated.
The JBL On Tour XTB system is being
overdriven by an amplified audio source.
Ensure that the JBL On Tour XTB system is connected
to an appropriate source device.
There is too much bass or treble.
If you want to use a longer cable,
make sure it’s a 3.5mm mini-jack
stereo male-to-male cable.
Move the JBL On Tour XTB cables farther away from
the monitor or other device.
Make sure that all signal cables
are inserted snugly into receptacles.
The volume level may be too high.
Check the volume of the source device. Some
devices will distort the output signal if the volume is
set to maximum.
Check the EQ setting on your source
device.
JBL, Inc., recommends that the source device EQ be
set to Flat or Off.
Your JBL On Tour XTB speaker
emits a loud hum or buzzing noise.
The input cable is not plugged in properly.
Check the input cable connection.
The speaker experiences radio
frequency interference or picks
up a radio station.
The input cable may be
picking up interference.
Wrap up excess input cable in order to make it as
short as possible.
When streaming music using
Bluetooth technology, the sound
from the JBL On Tour XTB
speaker lacks stereo quality.
There is a Bluetooth compatibility issue
between the JBL On Tour XTB unit and
the source device.
Ensure that the source device has the latest software.
Turn both the JBL On Tour XTB unit and the source
device both off and on to reset them.
Some source devices have known
functional issues with the JBL
On Tour XTB system.
www.jbl.com
0050CSK - JBL On Tour XTB v11.indd 9
9
08/09/08 13:01:06
troubleshooting
Charging
Symptom
Possible Problem
Solution
Note
Your iPod or cell phone will
not charge.
The wrong adapter is being used.
Make sure the correct adapter is being used for your
specific iPod or cell phone model.
Some cell phones cannot charge
via USB without software from the
charging system.
Note
Pairing
10
Symptom
Possible Problem
Solution
The audio device does not pair
with the JBL On Tour™ XTB
system.
The JBL On Tour XTB system is being
overdriven by an amplified audio source.
The audio device is not compatible. Verify with
the manufacturer.
The JBL On Tour XTB system is not
powered on.
Press down on the Power button.
The JBL On Tour XTB system is still
connected to another Bluetooth source
device.
Disconnect the connected Bluetooth audio device
and turn the JBL On Tour XTB system power off, then
back on.
The battery in the Bluetooth audio source
device or JBL On Tour XTB unit is low.
Recharge or replace the battery in the Bluetooth audio
source device and/or replace the batteries in the JBL
On Tour XTB unit.
The blue LED should be constantly
on, indicating that the system is in
the Discoverable mode.
If the amber LED on the JBL On
Tour XTB unit is on, it is indicating
a low battery.
jbl On TOUR XTB USER GUIDE
0050CSK - JBL On Tour XTB v11.indd 10
08/09/08 13:01:06
JBL and Odyssey are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. JBL On Tour is a trademark of
Harman International Industries, Incorporated.
The Bluetooth word mark and logo are registered trademarks owned by the Bluetooth SIG, Inc., and any use of such marks by Harman International Industries, Incorporated,
is under license. Other trademarks and trade names are those of their respective owners.
Nokia and Nokia XpressMusic are trademarks or registered trademarks of Nokia Corporation.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. Shuffle is a trademark of Apple Inc.
JBL et Odyssey sont des marques commerciales de Harman International Industries, Incorporated, déposées aux États-Unis et/ou dans d’autres pays. JBL On Tour est une
marque commerciale de Harman International Industries, Incorporated.
Le nom et le logo Bluetooth sont des marques déposées appartenant au Bluetooth SIG, Inc., et toute utilisation de ces marques par Harman International Industries, Incorporated,
fait l’objet d’une licence. Les autres marques commerciales et noms de commerce appartiennent à leurs propriétaires respectifs.
Nokia et Nokia XpressMusic sont des marques commerciales ou marques déposées de Nokia Corporation.
iPod est une marque commerciale de Apple Inc., déposée aux États-Unis et dans d’autres pays. Shuffle est une marque commerciale de Apple Inc.
Harman Consumer Group, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
516.255.4525 (USA only)
www.jbl.com
© 2008 Harman International Industries, Incorporated. All rights reserved. Tous droits réservés.
Document Number: 950-0224-001 Rev. D
0050CSK - JBL On Tour XTB v11.indd 120
08/09/08 13:03:31
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement